/*
 * Custom Boot configuration:
 * 1. 8bit SD port (MMC1)
 * 2. 4bit SD port (MMC2)
 * 3. eMMC (MMC0)
 */
boot_targets=mmc1 mmc2 mmc0 usb pxe dhcp

boot_file=zImage
boot_script_dhcp=boot.scr
console=ttyS0
defargs=lp0_vec=2064@0xf46ff000 core_edp_mv=1150 core_edp_ma=4000
	usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0
	user_debug=30 pcie_aspm=off
dfu_alt_info=apalis-tk1.img raw 0x0 0x500 mmcpart 1;
	boot part 0 1 mmcpart 0;
	rootfs part 0 2 mmcpart 0;
	zImage fat 0 1 mmcpart 0;
	tegra124-apalis-eval.dtb fat 0 1 mmcpart 0
fdt_board=eval
fdt_fixup=;
fdt_module=apalis-v1.2
uboot_hwpart=1
uboot_blk=0
set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff &&
	setexpr blkcnt ${blkcnt} / 0x200
update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} &&
	mmc write ${loadaddr} ${uboot_blk} ${blkcnt}
setethupdate=if env exists ethaddr; then; else setenv ethaddr
	00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr}
	flash_eth.img && source ${loadaddr}
setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan;
	load ${interface} ${drive}:1 ${loadaddr} flash_blk.img
	|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1
	${loadaddr} flash_blk.img &&
	source ${loadaddr}
setup=setenv setupargs igb_mac=${ethaddr}
	consoleblank=0 no_console_suspend=1 console=tty1
	console=${console},${baudrate}n8 debug_uartport=lsport,0
	${memargs}
setupdate=run setsdupdate || run setusbupdate || run setethupdate
setusbupdate=usb start && setenv interface usb; setenv drive 0;
	load ${interface} ${drive}:1 ${loadaddr} flash_blk.img &&
	source ${loadaddr}
vidargs=fbcon=map:1