board/mpc8641hpcn/mpc8641hpcn.c - filogic/uboot - Gitiles

 /*
  * Copyright 2004 Freescale Semiconductor.
  * Jeff Brown
  * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
  *
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <command.h>
 #include <pci.h>
 #include <asm/processor.h>
 #include <asm/immap_86xx.h>
 #include <spd.h>

 #if defined(CONFIG_OF_FLAT_TREE)
 #include <ft_build.h>
 extern void ft_cpu_setup(void *blob, bd_t *bd);
 #endif

 #include "pixis.h"

 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
 #endif

 #if defined(CONFIG_SPD_EEPROM)
 #include "spd_sdram.h"
 #endif

 void sdram_init(void);
 long int fixed_sdram(void);


 int board_early_init_f (void)
 {
 	return 0;
 }

 int checkboard (void)
 {
 	puts("Board: MPC8641HPCN\n");

 #ifdef CONFIG_PCI

 	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 	volatile ccsr_pex_t *pex1 = &immap->im_pex1;

 	uint devdisr = gur->devdisr;
 	uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
 	uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
 	uint pex1_agent =  (host1_agent == 0) || (host1_agent == 1);

 	if ((io_sel == 2 || io_sel == 3 || io_sel == 5
 	     || io_sel == 6 || io_sel == 7 || io_sel == 0xF)
 	    && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
 		debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host");
 		debug("0x%08x=0x%08x ", &pex1->pme_msg_det, pex1->pme_msg_det);
 		if (pex1->pme_msg_det) {
 			pex1->pme_msg_det = 0xffffffff;
 			debug(" with errors.  Clearing.  Now 0x%08x",
 			      pex1->pme_msg_det);
 		}
 		debug ("\n");
 	} else {
 		puts("PCI-EXPRESS 1: Disabled\n");
 	}

 #else
 	puts("PCI-EXPRESS1: Disabled\n");
 #endif

 	return 0;
 }


 long int
 initdram(int board_type)
 {
 	long dram_size = 0;

 #if defined(CONFIG_SPD_EEPROM)
 	dram_size = spd_sdram ();
 #else
 	dram_size = fixed_sdram ();
 #endif

 #if defined(CFG_RAMBOOT)
 	puts("    DDR: ");
 	return dram_size;
 #endif

 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 	/*
 	 * Initialize and enable DDR ECC.
 	 */
 	ddr_enable_ecc(dram_size);
 #endif

 	puts("    DDR: ");
 	return dram_size;
 }


 #if defined(CFG_DRAM_TEST)
 int testdram(void)
 {
 	uint *pstart = (uint *) CFG_MEMTEST_START;
 	uint *pend = (uint *) CFG_MEMTEST_END;
 	uint *p;

 	puts("SDRAM test phase 1:\n");
 	for (p = pstart; p < pend; p++)
 		*p = 0xaaaaaaaa;

 	for (p = pstart; p < pend; p++) {
 		if (*p != 0xaaaaaaaa) {
 			printf ("SDRAM test fails at: %08x\n", (uint) p);
 			return 1;
 		}
 	}

 	puts("SDRAM test phase 2:\n");
 	for (p = pstart; p < pend; p++)
 		*p = 0x55555555;

 	for (p = pstart; p < pend; p++) {
 		if (*p != 0x55555555) {
 			printf ("SDRAM test fails at: %08x\n", (uint) p);
 			return 1;
 		}
 	}

 	puts("SDRAM test passed.\n");
 	return 0;
 }
 #endif


 #if !defined(CONFIG_SPD_EEPROM)
 /*
  * Fixed sdram init -- doesn't use serial presence detect.
  */
 long int fixed_sdram(void)
 {
 #if !defined(CFG_RAMBOOT)
 	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_ddr_t *ddr= &immap->im_ddr1;

 	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
 	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
 	ddr->ext_refrec = CFG_DDR_EXT_REFRESH;
 	ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
 	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
 	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
 	ddr->sdram_mode_1 = CFG_DDR_MODE_1;
 	ddr->sdram_mode_2 = CFG_DDR_MODE_2;
 	ddr->sdram_interval = CFG_DDR_INTERVAL;
 	ddr->sdram_data_init = CFG_DDR_DATA_INIT;
 	ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
 	ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL;
 	ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS;

 #if defined (CONFIG_DDR_ECC)
 	ddr->err_disable = 0x0000008D;
 	ddr->err_sbe = 0x00ff0000;
 #endif
 	asm("sync;isync");

 	udelay(500);

 #if defined (CONFIG_DDR_ECC)
 	/* Enable ECC checking */
 	ddr->sdram_cfg_1 = (CFG_DDR_CONTROL | 0x20000000);
 #else
 	ddr->sdram_cfg_1 = CFG_DDR_CONTROL;
 	ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
 #endif
 	asm("sync; isync");

 	udelay(500);
 #endif
 	return CFG_SDRAM_SIZE * 1024 * 1024;
 }
 #endif	/* !defined(CONFIG_SPD_EEPROM) */


 #if defined(CONFIG_PCI)
 /*
  * Initialize PCI Devices, report devices found.
  */

 #ifndef CONFIG_PCI_PNP
 static struct pci_config_table pci_fsl86xxads_config_table[] = {
     { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
       PCI_IDSEL_NUMBER, PCI_ANY_ID,
       pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
 				   PCI_ENET0_MEMADDR,
 				   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
       } },
     { }
 };
 #endif


 static struct pci_controller hose = {
 #ifndef CONFIG_PCI_PNP
 	config_table: pci_mpc86xxcts_config_table,
 #endif
 };

 #endif	/* CONFIG_PCI */


 void
 pci_init_board(void)
 {
 #ifdef CONFIG_PCI
 	extern void pci_mpc86xx_init(struct pci_controller *hose);

 	pci_mpc86xx_init(&hose);
 #endif /* CONFIG_PCI */
 }

 #if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
 void
 ft_board_setup(void *blob, bd_t *bd)
 {
 	u32 *p;
 	int len;

 	ft_cpu_setup(blob, bd);

 	p = ft_get_prop(blob, "/memory/reg", &len);
 	if (p != NULL) {
 		*p++ = cpu_to_be32(bd->bi_memstart);
 		*p = cpu_to_be32(bd->bi_memsize);
 	}
 }
 #endif


 void
 mpc8641_reset_board(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	char cmd;
 	ulong val;
 	ulong corepll;

 	/*
 	 * No args is a simple reset request.
 	 */
 	if (argv <= 0) {
 		out8(PIXIS_BASE + PIXIS_RST, 0);
 		/* not reached */
 	}

 	cmd = argv[1][1];
 	switch (cmd) {
 	case 'f':    /* reset with frequency changed */
 		if (argc < 5)
 			goto my_usage;
 		read_from_px_regs(0);

 		val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10));

 		corepll = strfractoint(argv[3]);
 		val = val + set_px_corepll(corepll);
 		val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10));
 		if (val == 3) {
 			puts("Setting registers VCFGEN0 and VCTL\n");
 			read_from_px_regs(1);
 			puts("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n");
 			set_px_go();
 		} else
 			goto my_usage;

 		while (1); /* Not reached */

 	case 'l':
 		if (argv[2][1] == 'f') {
 			read_from_px_regs(0);
 			read_from_px_regs_altbank(0);
 			/* reset with frequency changed */
 			val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10));

 			corepll = strfractoint(argv[4]);
 			val = val + set_px_corepll(corepll);
 			val = val + set_px_mpxpll(simple_strtoul(argv[5], NULL, 10));
 			if (val == 3) {
 				puts("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
 				set_altbank();
 				read_from_px_regs(1);
 				read_from_px_regs_altbank(1);
 				puts("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n");
 				set_px_go_with_watchdog();
 			} else
 				goto my_usage;

 			while(1); /* Not reached */

 		} else if(argv[2][1] == 'd'){
 			/*
 			 * Reset from alternate bank without changing
 			 * frequencies but with watchdog timer enabled.
 			 */
 			read_from_px_regs(0);
 			read_from_px_regs_altbank(0);
 			puts("Setting registers VCFGEN1, VBOOT, and VCTL\n");
 			set_altbank();
 			read_from_px_regs_altbank(1);
 			puts("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n");
 			set_px_go_with_watchdog();
 			while(1); /* Not reached */

 		} else {
 			/*
 			 * Reset from next bank without changing
 			 * frequency and without watchdog timer enabled.
 			 */
 			read_from_px_regs(0);
 			read_from_px_regs_altbank(0);
 			if(argc > 2)
 				goto my_usage;
 			puts("Setting registers VCFGNE1, VBOOT, and VCTL\n");
 			set_altbank();
 			read_from_px_regs_altbank(1);
 			puts("Resetting board to boot from the other bank....\n");
 			set_px_go();
 		}

 	default:
 		goto my_usage;
 	}

 my_usage:
 	puts("\nUsage: reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n");
 	puts("       reset altbank [cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>]\n");
 	puts("       reset altbank [wd]\n");
 	puts("For example:   reset cf 40 2.5 10\n");
 	puts("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n");
 }
	/*
	* Copyright 2004 Freescale Semiconductor.
	* Jeff Brown
	* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
	*
	* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <command.h>
	#include <pci.h>
	#include <asm/processor.h>
	#include <asm/immap_86xx.h>
	#include <spd.h>

	#if defined(CONFIG_OF_FLAT_TREE)
	#include <ft_build.h>
	extern void ft_cpu_setup(void blob, bd_t bd);
	#endif

	#include "pixis.h"

	#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
	extern void ddr_enable_ecc(unsigned int dram_size);
	#endif

	#if defined(CONFIG_SPD_EEPROM)
	#include "spd_sdram.h"
	#endif

	void sdram_init(void);
	long int fixed_sdram(void);


	int board_early_init_f (void)
	{
	return 0;
	}

	int checkboard (void)
	{
	puts("Board: MPC8641HPCN\n");

	#ifdef CONFIG_PCI

	volatile immap_t immap = (immap_t ) CFG_CCSRBAR;
	volatile ccsr_gur_t *gur = &immap->im_gur;
	volatile ccsr_pex_t *pex1 = &immap->im_pex1;

	uint devdisr = gur->devdisr;
	uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
	uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
	uint pex1_agent = (host1_agent == 0) \|\| (host1_agent == 1);

	if ((io_sel == 2 \|\| io_sel == 3 \|\| io_sel == 5
	\|\| io_sel == 6 \|\| io_sel == 7 \|\| io_sel == 0xF)
	&& !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
	debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host");
	debug("0x%08x=0x%08x ", &pex1->pme_msg_det, pex1->pme_msg_det);
	if (pex1->pme_msg_det) {
	pex1->pme_msg_det = 0xffffffff;
	debug(" with errors. Clearing. Now 0x%08x",
	pex1->pme_msg_det);
	}
	debug ("\n");
	} else {
	puts("PCI-EXPRESS 1: Disabled\n");
	}

	#else
	puts("PCI-EXPRESS1: Disabled\n");
	#endif

	return 0;
	}


	long int
	initdram(int board_type)
	{
	long dram_size = 0;

	#if defined(CONFIG_SPD_EEPROM)
	dram_size = spd_sdram ();
	#else
	dram_size = fixed_sdram ();
	#endif

	#if defined(CFG_RAMBOOT)
	puts(" DDR: ");
	return dram_size;
	#endif

	#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
	/*
	* Initialize and enable DDR ECC.
	*/
	ddr_enable_ecc(dram_size);
	#endif

	puts(" DDR: ");
	return dram_size;
	}


	#if defined(CFG_DRAM_TEST)
	int testdram(void)
	{
	uint pstart = (uint ) CFG_MEMTEST_START;
	uint pend = (uint ) CFG_MEMTEST_END;
	uint *p;

	puts("SDRAM test phase 1:\n");
	for (p = pstart; p < pend; p++)
	*p = 0xaaaaaaaa;

	for (p = pstart; p < pend; p++) {
	if (*p != 0xaaaaaaaa) {
	printf ("SDRAM test fails at: %08x\n", (uint) p);
	return 1;
	}
	}

	puts("SDRAM test phase 2:\n");
	for (p = pstart; p < pend; p++)
	*p = 0x55555555;

	for (p = pstart; p < pend; p++) {
	if (*p != 0x55555555) {
	printf ("SDRAM test fails at: %08x\n", (uint) p);
	return 1;
	}
	}

	puts("SDRAM test passed.\n");
	return 0;
	}
	#endif


	#if !defined(CONFIG_SPD_EEPROM)
	/*
	* Fixed sdram init -- doesn't use serial presence detect.
	*/
	long int fixed_sdram(void)
	{
	#if !defined(CFG_RAMBOOT)
	volatile immap_t immap = (immap_t )CFG_IMMR;
	volatile ccsr_ddr_t *ddr= &immap->im_ddr1;

	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
	ddr->ext_refrec = CFG_DDR_EXT_REFRESH;
	ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
	ddr->sdram_mode_1 = CFG_DDR_MODE_1;
	ddr->sdram_mode_2 = CFG_DDR_MODE_2;
	ddr->sdram_interval = CFG_DDR_INTERVAL;
	ddr->sdram_data_init = CFG_DDR_DATA_INIT;
	ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
	ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL;
	ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS;

	#if defined (CONFIG_DDR_ECC)
	ddr->err_disable = 0x0000008D;
	ddr->err_sbe = 0x00ff0000;
	#endif
	asm("sync;isync");

	udelay(500);

	#if defined (CONFIG_DDR_ECC)
	/* Enable ECC checking */
	ddr->sdram_cfg_1 = (CFG_DDR_CONTROL \| 0x20000000);
	#else
	ddr->sdram_cfg_1 = CFG_DDR_CONTROL;
	ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
	#endif
	asm("sync; isync");

	udelay(500);
	#endif
	return CFG_SDRAM_SIZE * 1024 * 1024;
	}
	#endif /* !defined(CONFIG_SPD_EEPROM) */


	#if defined(CONFIG_PCI)
	/*
	* Initialize PCI Devices, report devices found.
	*/

	#ifndef CONFIG_PCI_PNP
	static struct pci_config_table pci_fsl86xxads_config_table[] = {
	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
	PCI_IDSEL_NUMBER, PCI_ANY_ID,
	pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
	PCI_ENET0_MEMADDR,
	PCI_COMMAND_MEMORY \| PCI_COMMAND_MASTER
	} },
	{ }
	};
	#endif


	static struct pci_controller hose = {
	#ifndef CONFIG_PCI_PNP
	config_table: pci_mpc86xxcts_config_table,
	#endif
	};

	#endif /* CONFIG_PCI */


	void
	pci_init_board(void)
	{
	#ifdef CONFIG_PCI
	extern void pci_mpc86xx_init(struct pci_controller *hose);

	pci_mpc86xx_init(&hose);
	#endif /* CONFIG_PCI */
	}

	#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
	void
	ft_board_setup(void blob, bd_t bd)
	{
	u32 *p;
	int len;

	ft_cpu_setup(blob, bd);

	p = ft_get_prop(blob, "/memory/reg", &len);
	if (p != NULL) {
	*p++ = cpu_to_be32(bd->bi_memstart);
	*p = cpu_to_be32(bd->bi_memsize);
	}
	}
	#endif


	void
	mpc8641_reset_board(cmd_tbl_t cmdtp, int flag, int argc, char argv[])
	{
	char cmd;
	ulong val;
	ulong corepll;

	/*
	* No args is a simple reset request.
	*/
	if (argv <= 0) {
	out8(PIXIS_BASE + PIXIS_RST, 0);
	/* not reached */
	}

	cmd = argv[1][1];
	switch (cmd) {
	case 'f': /* reset with frequency changed */
	if (argc < 5)
	goto my_usage;
	read_from_px_regs(0);

	val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10));

	corepll = strfractoint(argv[3]);
	val = val + set_px_corepll(corepll);
	val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10));
	if (val == 3) {
	puts("Setting registers VCFGEN0 and VCTL\n");
	read_from_px_regs(1);
	puts("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n");
	set_px_go();
	} else
	goto my_usage;

	while (1); /* Not reached */

	case 'l':
	if (argv[2][1] == 'f') {
	read_from_px_regs(0);
	read_from_px_regs_altbank(0);
	/* reset with frequency changed */
	val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10));

	corepll = strfractoint(argv[4]);
	val = val + set_px_corepll(corepll);
	val = val + set_px_mpxpll(simple_strtoul(argv[5], NULL, 10));
	if (val == 3) {
	puts("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
	set_altbank();
	read_from_px_regs(1);
	read_from_px_regs_altbank(1);
	puts("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n");
	set_px_go_with_watchdog();
	} else
	goto my_usage;

	while(1); /* Not reached */

	} else if(argv[2][1] == 'd'){
	/*
	* Reset from alternate bank without changing
	* frequencies but with watchdog timer enabled.
	*/
	read_from_px_regs(0);
	read_from_px_regs_altbank(0);
	puts("Setting registers VCFGEN1, VBOOT, and VCTL\n");
	set_altbank();
	read_from_px_regs_altbank(1);
	puts("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n");
	set_px_go_with_watchdog();
	while(1); /* Not reached */

	} else {
	/*
	* Reset from next bank without changing
	* frequency and without watchdog timer enabled.
	*/
	read_from_px_regs(0);
	read_from_px_regs_altbank(0);
	if(argc > 2)
	goto my_usage;
	puts("Setting registers VCFGNE1, VBOOT, and VCTL\n");
	set_altbank();
	read_from_px_regs_altbank(1);
	puts("Resetting board to boot from the other bank....\n");
	set_px_go();
	}

	default:
	goto my_usage;
	}

	my_usage:
	puts("\nUsage: reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n");
	puts(" reset altbank [cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>]\n");
	puts(" reset altbank [wd]\n");
	puts("For example: reset cf 40 2.5 10\n");
	puts("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n");
	}