board/mpc8641hpcn/mpc8641hpcn.c

/*
 * Copyright 2004 Freescale Semiconductor.
 * Jeff Brown
 * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
 *
 * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <command.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/immap_86xx.h>
#include <spd.h>

#if defined(CONFIG_OF_FLAT_TREE)
#include <ft_build.h>
extern void ft_cpu_setup(void *blob, bd_t *bd);
#endif

#include "pixis.h"

#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif

#if defined(CONFIG_SPD_EEPROM)
#include "spd_sdram.h"
#endif

void sdram_init(void);
long int fixed_sdram(void);


int board_early_init_f (void)
{
	return 0;
}

int checkboard (void)
{
	puts("Board: MPC8641HPCN\n");

#ifdef CONFIG_PCI

	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
	volatile ccsr_gur_t *gur = &immap->im_gur;
	volatile ccsr_pex_t *pex1 = &immap->im_pex1;

	uint devdisr = gur->devdisr;
	uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
	uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
	uint pex1_agent =  (host1_agent == 0) || (host1_agent == 1);

	if ((io_sel == 2 || io_sel == 3 || io_sel == 5
	     || io_sel == 6 || io_sel == 7 || io_sel == 0xF)
	    && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
		debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host");
		debug("0x%08x=0x%08x ", &pex1->pme_msg_det, pex1->pme_msg_det);
		if (pex1->pme_msg_det) {
			pex1->pme_msg_det = 0xffffffff;
			debug(" with errors.  Clearing.  Now 0x%08x",
			      pex1->pme_msg_det);
		}
		debug ("\n");
	} else {
		puts("PCI-EXPRESS 1: Disabled\n");
	}

#else
	puts("PCI-EXPRESS1: Disabled\n");
#endif

	return 0;
}


long int
initdram(int board_type)
{
	long dram_size = 0;

#if defined(CONFIG_SPD_EEPROM)
	dram_size = spd_sdram ();
#else
	dram_size = fixed_sdram ();
#endif

#if defined(CFG_RAMBOOT)
	puts("    DDR: ");
	return dram_size;
#endif

#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
	/*
	 * Initialize and enable DDR ECC.
	 */
	ddr_enable_ecc(dram_size);
#endif

	puts("    DDR: ");
	return dram_size;
}


#if defined(CFG_DRAM_TEST)
int testdram(void)
{
	uint *pstart = (uint *) CFG_MEMTEST_START;
	uint *pend = (uint *) CFG_MEMTEST_END;
	uint *p;

	puts("SDRAM test phase 1:\n");
	for (p = pstart; p < pend; p++)
		*p = 0xaaaaaaaa;

	for (p = pstart; p < pend; p++) {
		if (*p != 0xaaaaaaaa) {
			printf ("SDRAM test fails at: %08x\n", (uint) p);
			return 1;
		}
	}

	puts("SDRAM test phase 2:\n");
	for (p = pstart; p < pend; p++)
		*p = 0x55555555;

	for (p = pstart; p < pend; p++) {
		if (*p != 0x55555555) {
			printf ("SDRAM test fails at: %08x\n", (uint) p);
			return 1;
		}
	}

	puts("SDRAM test passed.\n");
	return 0;
}
#endif


#if !defined(CONFIG_SPD_EEPROM)
/*
 * Fixed sdram init -- doesn't use serial presence detect.
 */
long int fixed_sdram(void)
{
#if !defined(CFG_RAMBOOT)
	volatile immap_t *immap = (immap_t *)CFG_IMMR;
	volatile ccsr_ddr_t *ddr= &immap->im_ddr1;

	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
	ddr->ext_refrec = CFG_DDR_EXT_REFRESH;
	ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
	ddr->sdram_mode_1 = CFG_DDR_MODE_1;
	ddr->sdram_mode_2 = CFG_DDR_MODE_2;
	ddr->sdram_interval = CFG_DDR_INTERVAL;
	ddr->sdram_data_init = CFG_DDR_DATA_INIT;
	ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
	ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL;
	ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS;

#if defined (CONFIG_DDR_ECC)
	ddr->err_disable = 0x0000008D;
	ddr->err_sbe = 0x00ff0000;
#endif
	asm("sync;isync");

	udelay(500);

#if defined (CONFIG_DDR_ECC)
	/* Enable ECC checking */
	ddr->sdram_cfg_1 = (CFG_DDR_CONTROL | 0x20000000);
#else
	ddr->sdram_cfg_1 = CFG_DDR_CONTROL;
	ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
#endif
	asm("sync; isync");

	udelay(500);
#endif
	return CFG_SDRAM_SIZE * 1024 * 1024;
}
#endif	/* !defined(CONFIG_SPD_EEPROM) */


#if defined(CONFIG_PCI)
/*
 * Initialize PCI Devices, report devices found.
 */

#ifndef CONFIG_PCI_PNP
static struct pci_config_table pci_fsl86xxads_config_table[] = {
    { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
      PCI_IDSEL_NUMBER, PCI_ANY_ID,
      pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
				   PCI_ENET0_MEMADDR,
				   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
      } },
    { }
};
#endif


static struct pci_controller hose = {
#ifndef CONFIG_PCI_PNP
	config_table: pci_mpc86xxcts_config_table,
#endif
};

#endif	/* CONFIG_PCI */


void
pci_init_board(void)
{
#ifdef CONFIG_PCI
	extern void pci_mpc86xx_init(struct pci_controller *hose);

	pci_mpc86xx_init(&hose);
#endif /* CONFIG_PCI */
}

#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
void
ft_board_setup(void *blob, bd_t *bd)
{
	u32 *p;
	int len;

	ft_cpu_setup(blob, bd);

	p = ft_get_prop(blob, "/memory/reg", &len);
	if (p != NULL) {
		*p++ = cpu_to_be32(bd->bi_memstart);
		*p = cpu_to_be32(bd->bi_memsize);
	}
}
#endif


void
mpc8641_reset_board(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
	char cmd;
	ulong val;
	ulong corepll;

	/*
	 * No args is a simple reset request.
	 */
	if (argv <= 0) {
		out8(PIXIS_BASE + PIXIS_RST, 0);
		/* not reached */
	}

	cmd = argv[1][1];
	switch (cmd) {
	case 'f':    /* reset with frequency changed */
		if (argc < 5)
			goto my_usage;
		read_from_px_regs(0);

		val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10));

		corepll = strfractoint(argv[3]);
		val = val + set_px_corepll(corepll);
		val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10));
		if (val == 3) {
			puts("Setting registers VCFGEN0 and VCTL\n");
			read_from_px_regs(1);
			puts("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n");
			set_px_go();
		} else
			goto my_usage;

		while (1); /* Not reached */

	case 'l':
		if (argv[2][1] == 'f') {
			read_from_px_regs(0);
			read_from_px_regs_altbank(0);
			/* reset with frequency changed */
			val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10));

			corepll = strfractoint(argv[4]);
			val = val + set_px_corepll(corepll);
			val = val + set_px_mpxpll(simple_strtoul(argv[5], NULL, 10));
			if (val == 3) {
				puts("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
				set_altbank();
				read_from_px_regs(1);
				read_from_px_regs_altbank(1);
				puts("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n");
				set_px_go_with_watchdog();
			} else
				goto my_usage;

			while(1); /* Not reached */

		} else if(argv[2][1] == 'd'){
			/*
			 * Reset from alternate bank without changing
			 * frequencies but with watchdog timer enabled.
			 */
			read_from_px_regs(0);
			read_from_px_regs_altbank(0);
			puts("Setting registers VCFGEN1, VBOOT, and VCTL\n");
			set_altbank();
			read_from_px_regs_altbank(1);
			puts("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n");
			set_px_go_with_watchdog();
			while(1); /* Not reached */

		} else {
			/*
			 * Reset from next bank without changing
			 * frequency and without watchdog timer enabled.
			 */
			read_from_px_regs(0);
			read_from_px_regs_altbank(0);
			if(argc > 2)
				goto my_usage;
			puts("Setting registers VCFGNE1, VBOOT, and VCTL\n");
			set_altbank();
			read_from_px_regs_altbank(1);
			puts("Resetting board to boot from the other bank....\n");
			set_px_go();
		}

	default:
		goto my_usage;
	}

my_usage:
	puts("\nUsage: reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n");
	puts("       reset altbank [cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>]\n");
	puts("       reset altbank [wd]\n");
	puts("For example:   reset cf 40 2.5 10\n");
	puts("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n");
}