dts/upstream/src/arm64/mediatek/mt8395-radxa-nio-12l.dts - filogic/uboot - Gitiles

 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Copyright (C) 2023 Radxa Limited
  * Copyright (C) 2024 Collabora Ltd.
  *                    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
  */

 #include "mt8195.dtsi"
 #include "mt6359.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
 #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
 #include <dt-bindings/spmi/spmi.h>
 #include <dt-bindings/usb/pd.h>

 / {
 	model = "Radxa NIO 12L";
 	chassis-type = "embedded";
 	compatible = "radxa,nio-12l", "mediatek,mt8395", "mediatek,mt8195";

 	aliases {
 		i2c0 = &i2c2;
 		i2c1 = &i2c3;
 		i2c2 = &i2c4;
 		i2c3 = &i2c0;
 		i2c4 = &i2c1;
 		ethernet0 = &eth;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		spi0 = &spi1;
 		spi1 = &spi2;
 	};

 	chosen {
 		stdout-path = "serial0:921600n8";
 	};

 	firmware {
 		optee {
 			compatible = "linaro,optee-tz";
 			method = "smc";
 		};
 	};

 	memory@40000000 {
 		device_type = "memory";
 		reg = <0 0x40000000 0x1 0x0>;
 	};

 	wifi_vreg: regulator-wifi-3v3-en {
 		compatible = "regulator-fixed";
 		regulator-name = "wifi_3v3_en";
 		regulator-always-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		enable-active-high;
 		gpio = <&pio 67 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&wifi_vreg_pins>;
 		vin-supply = <&vsys>;
 	};

 	/* system wide switching 5.0V power rail */
 	vsys: regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vsys";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		vin-supply = <&vcc5v0_vsys>;
 	};

 	vsys_buck: regulator-vsys-buck {
 		compatible = "regulator-fixed";
 		regulator-name = "vsys_buck";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		vin-supply = <&vcc5v0_vsys>;
 	};

 	/* Rail from power-only "TYPE C DC" port */
 	vcc5v0_vsys: regulator-vcc5v0-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
 		regulator-always-on;
 		regulator-boot-on;
 	};

 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;

 		/*
 		 * 12 MiB reserved for OP-TEE (BL32)
 		 * +-----------------------+ 0x43e0_0000
 		 * |      SHMEM 2MiB       |
 		 * +-----------------------+ 0x43c0_0000
 		 * |        | TA_RAM  8MiB |
 		 * + TZDRAM +--------------+ 0x4340_0000
 		 * |        | TEE_RAM 2MiB |
 		 * +-----------------------+ 0x4320_0000
 		 */
 		optee_reserved: optee@43200000 {
 			reg = <0 0x43200000 0 0xc00000>;
 			no-map;
 		};

 		scp_mem: memory@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
 			no-map;
 		};

 		vpu_mem: memory@53000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
 		};

 		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
 		bl31_secmon_mem: memory@54600000 {
 			reg = <0 0x54600000 0x0 0x200000>;
 			no-map;
 		};

 		afe_mem: memory@60000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x60000000 0 0x1100000>;
 			no-map;
 		};

 		apu_mem: memory@62000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
 		};
 	};
 };

 &eth {
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&rgmii_phy>;
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&eth_default_pins>;
 	pinctrl-1 = <&eth_sleep_pins>;
 	mediatek,tx-delay-ps = <2030>;
 	mediatek,mac-wol;
 	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
 	snps,reset-delays-us = <0 20000 100000>;
 	status = "okay";

 	mdio {
 		rgmii_phy: ethernet-phy@1 {
 			compatible = "ethernet-phy-id001c.c916";
 			reg = <0x1>;
 		};
 	};
 };

 &gpu {
 	mali-supply = <&mt6315_7_vbuck1>;
 	status = "okay";
 };

 &i2c2 {
 	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c2_pins>;
 	pinctrl-names = "default";
 	status = "okay";

 	typec-mux@48 {
 		compatible = "ite,it5205";
 		reg = <0x48>;

 		mode-switch;
 		orientation-switch;

 		vcc-supply = <&mt6359_vibr_ldo_reg>;

 		port {
 			it5205_sbu_mux: endpoint {
 				remote-endpoint = <&typec_con_mux>;
 			};
 		};
 	};
 };

 &i2c4 {
 	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c4_pins>;
 	pinctrl-names = "default";
 	status = "okay";

 	/* I2C4 exposed at 39-pins MIPI-LCD connector */
 };

 &i2c6 {
 	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c6_pins>;
 	pinctrl-names = "default";
 	status = "okay";

 	mt6360: pmic@34 {
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-names = "IRQB";
 		interrupt-controller;
 		#interrupt-cells = <1>;
 		pinctrl-0 = <&mt6360_pins>;

 		charger {
 			compatible = "mediatek,mt6360-chg";
 			richtek,vinovp-microvolt = <14500000>;

 			otg_vbus_regulator: usb-otg-vbus-regulator {
 				regulator-name = "usb-otg-vbus";
 				regulator-min-microvolt = <4425000>;
 				regulator-max-microvolt = <5825000>;
 			};
 		};

 		regulator {
 			compatible = "mediatek,mt6360-regulator";
 			LDO_VIN1-supply = <&vsys_buck>;
 			LDO_VIN3-supply = <&mt6360_buck2>;

 			mt6360_buck1: buck1 {
 				regulator-name = "emi_vdd2";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
 				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 							   MT6360_OPMODE_LP
 							   MT6360_OPMODE_ULP>;
 				regulator-always-on;
 			};

 			mt6360_buck2: buck2 {
 				regulator-name = "emi_vddq";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
 				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 							   MT6360_OPMODE_LP
 							   MT6360_OPMODE_ULP>;
 				regulator-always-on;
 			};

 			mt6360_ldo1: ldo1 {
 				regulator-name = "ext_lcd_3v3";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 							   MT6360_OPMODE_LP>;
 				regulator-always-on;
 			};

 			mt6360_ldo2: ldo2 {
 				regulator-name = "panel1_p1v8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 							   MT6360_OPMODE_LP>;
 			};

 			mt6360_ldo3: ldo3 {
 				regulator-name = "vmc_pmu";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
 				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 							   MT6360_OPMODE_LP>;
 			};

 			mt6360_ldo5: ldo5 {
 				regulator-name = "vmch_pmu";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 							   MT6360_OPMODE_LP>;
 				regulator-always-on;
 			};

 			mt6360_ldo6: ldo6 {
 				regulator-name = "mt6360_ldo6"; /* Test point */
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
 				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 							   MT6360_OPMODE_LP>;
 			};

 			mt6360_ldo7: ldo7 {
 				regulator-name = "emi_vmddr_en";
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
 				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 							   MT6360_OPMODE_LP>;
 				regulator-always-on;
 			};
 		};

 		typec {
 			compatible = "mediatek,mt6360-tcpc";
 			interrupts-extended = <&pio 100 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-names = "PD_IRQB";

 			connector {
 				compatible = "usb-c-connector";
 				label = "USB-C";
 				data-role = "dual";
 				op-sink-microwatt = <10000000>;
 				power-role = "dual";
 				try-power-role = "sink";

 				source-pdos = <PDO_FIXED(5000, 1000,
 							 PDO_FIXED_DUAL_ROLE |
 							 PDO_FIXED_DATA_SWAP)>;
 				sink-pdos = <PDO_FIXED(5000, 3000,
 						       PDO_FIXED_DUAL_ROLE |
 						       PDO_FIXED_DATA_SWAP)>;

 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;

 					port@0 {
 						reg = <0>;
 						typec_con_hs: endpoint {
 							remote-endpoint = <&mtu3_hs0_role_sw>;
 						};
 					};

 					port@2 {
 						reg = <2>;
 						typec_con_mux: endpoint {
 							remote-endpoint = <&it5205_sbu_mux>;
 						};
 					};
 				};
 			};
 		};
 	};
 };

 /* MMC0 Controller: eMMC (HS400). Power lines are shared with UFS! */
 &mmc0 {
 	pinctrl-names = "default", "state_uhs";
 	pinctrl-0 = <&mmc0_default_pins>;
 	pinctrl-1 = <&mmc0_uhs_pins>;
 	bus-width = <8>;
 	max-frequency = <200000000>;
 	hs400-ds-delay = <0x14c11>;
 	cap-mmc-highspeed;
 	cap-mmc-hw-reset;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	no-sdio;
 	no-sd;
 	non-removable;
 	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
 	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
 	status = "okay";
 };

 /* MMC1 Controller: MicroSD card slot */
 &mmc1 {
 	pinctrl-names = "default", "state_uhs";
 	pinctrl-0 = <&mmc1_default_pins>, <&mmc1_pins_detect>;
 	pinctrl-1 = <&mmc1_default_pins>;
 	bus-width = <4>;
 	max-frequency = <200000000>;
 	cap-sd-highspeed;
 	cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
 	no-mmc;
 	no-sdio;
 	sd-uhs-sdr50;
 	sd-uhs-sdr104;
 	vmmc-supply = <&mt6360_ldo5>;
 	vqmmc-supply = <&mt6360_ldo3>;
 	status = "okay";
 };

 &mt6359_vaud18_ldo_reg {
 	regulator-always-on;
 };

 &mt6359_vbbck_ldo_reg {
 	regulator-always-on;
 };

 /* For USB Hub */
 &mt6359_vcamio_ldo_reg {
 	regulator-always-on;
 };

 &mt6359_vcn33_2_bt_ldo_reg {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
 };

 &mt6359_vcore_buck_reg {
 	regulator-always-on;
 };

 &mt6359_vgpu11_buck_reg {
 	regulator-always-on;
 };

 &mt6359_vproc1_buck_reg {
 	regulator-always-on;
 };

 &mt6359_vproc2_buck_reg {
 	regulator-always-on;
 };

 &mt6359_vpu_buck_reg {
 	regulator-always-on;
 };

 &mt6359_vrf12_ldo_reg {
 	regulator-always-on;
 };

 &mt6359_vsram_md_ldo_reg {
 	regulator-always-on;
 };

 /* for GPU SRAM */
 &mt6359_vsram_others_ldo_reg {
 	regulator-min-microvolt = <750000>;
 	regulator-max-microvolt = <750000>;
 };

 &pio {
 	eth_default_pins: eth-default-pins {
 		pins-cc {
 			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
 				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
 				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
 				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
 			drive-strength = <8>;
 		};

 		pins-mdio {
 			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
 				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
 			input-enable;
 		};

 		pins-power {
 			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
 				 <PINMUX_GPIO92__FUNC_GPIO92>;
 			output-high;
 		};

 		pins-rst {
 			pinmux = <PINMUX_GPIO93__FUNC_GPIO93>;
 		};

 		pins-rxd {
 			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
 				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
 				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
 				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
 		};

 		pins-txd {
 			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
 				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
 				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
 				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
 			drive-strength = <8>;
 		};
 	};

 	eth_sleep_pins: eth-sleep-pins {
 		pins-cc {
 			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
 				 <PINMUX_GPIO86__FUNC_GPIO86>,
 				 <PINMUX_GPIO87__FUNC_GPIO87>,
 				 <PINMUX_GPIO88__FUNC_GPIO88>;
 		};

 		pins-mdio {
 			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
 				 <PINMUX_GPIO90__FUNC_GPIO90>;
 			bias-disable;
 			input-disable;
 		};

 		pins-rxd {
 			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
 				 <PINMUX_GPIO82__FUNC_GPIO82>,
 				 <PINMUX_GPIO83__FUNC_GPIO83>,
 				 <PINMUX_GPIO84__FUNC_GPIO84>;
 		};

 		pins-txd {
 			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
 				 <PINMUX_GPIO78__FUNC_GPIO78>,
 				 <PINMUX_GPIO79__FUNC_GPIO79>,
 				 <PINMUX_GPIO80__FUNC_GPIO80>;
 		};
 	};

 	i2c2_pins: i2c2-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
 				 <PINMUX_GPIO13__FUNC_SCL2>;
 			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
 			drive-strength = <6>;
 			drive-strength-microamp = <1000>;
 		};
 	};

 	i2c4_pins: i2c4-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
 				 <PINMUX_GPIO17__FUNC_SCL4>;
 			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
 			drive-strength-microamp = <1000>;
 		};
 	};

 	i2c6_pins: i2c6-pins {
 		pins {
 			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
 				 <PINMUX_GPIO26__FUNC_SCL6>;
 			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
 		};
 	};

 	mmc0_default_pins: mmc0-default-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 			drive-strength = <6>;
 		};

 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
 				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
 				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
 				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
 				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
 				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
 				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
 				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 			drive-strength = <6>;
 			input-enable;
 		};

 		pins-rst {
 			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 			drive-strength = <6>;
 		};
 	};

 	mmc0_uhs_pins: mmc0-uhs-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 			drive-strength = <8>;
 		};

 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
 				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
 				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
 				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
 				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
 				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
 				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
 				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 			drive-strength = <8>;
 			input-enable;
 		};

 		pins-ds {
 			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 			drive-strength = <8>;
 		};

 		pins-rst {
 			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 			drive-strength = <8>;
 		};
 	};

 	mmc1_default_pins: mmc1-default-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 			drive-strength = <8>;
 		};

 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
 				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
 				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 			drive-strength = <8>;
 			input-enable;
 		};
 	};

 	mmc1_pins_detect: mmc1-detect-pins {
 		pins-insert {
 			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
 			bias-pull-up;
 		};
 	};

 	mt6360_pins: mt6360-pins {
 		pins-irq {
 			pinmux = <PINMUX_GPIO100__FUNC_GPIO100>,
 				 <PINMUX_GPIO101__FUNC_GPIO101>;
 			input-enable;
 			bias-pull-up;
 		};
 	};

 	pcie0_default_pins: pcie0-default-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
 				 <PINMUX_GPIO20__FUNC_PERSTN>,
 				 <PINMUX_GPIO21__FUNC_CLKREQN>;
 			bias-pull-up;
 		};
 	};

 	pcie1_default_pins: pcie1-default-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO0__FUNC_PERSTN_1>,
 				 <PINMUX_GPIO1__FUNC_CLKREQN_1>,
 				 <PINMUX_GPIO2__FUNC_WAKEN_1>;
 			bias-disable;
 		};
 	};

 	spi1_pins: spi1-default-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
 				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>,
 				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
 				 <PINMUX_GPIO139__FUNC_SPIM1_MI>;
 			bias-disable;
 		};
 	};

 	spi2_pins: spi2-default-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
 				 <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
 				 <PINMUX_GPIO142__FUNC_SPIM2_MO>,
 				 <PINMUX_GPIO143__FUNC_SPIM2_MI>;
 			bias-disable;
 		};
 	};

 	uart0_pins: uart0-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
 				 <PINMUX_GPIO99__FUNC_URXD0>;
 		};
 	};

 	uart1_pins: uart1-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO102__FUNC_UTXD1>,
 				 <PINMUX_GPIO103__FUNC_URXD1>;
 		};
 	};

 	wifi_vreg_pins: wifi-vreg-pins {
 		pins-wifi-pmu-en {
 			pinmux = <PINMUX_GPIO65__FUNC_GPIO65>;
 			output-high;
 		};

 		pins-wifi-vreg-en {
 			pinmux = <PINMUX_GPIO67__FUNC_GPIO67>;
 		};
 	};
 };

 &pcie0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie0_default_pins>;
 	status = "okay";
 };

 &pcie1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie1_default_pins>;
 	status = "okay";
 };

 &pmic {
 	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
 };

 &scp {
 	memory-region = <&scp_mem>;
 	status = "okay";
 };

 &spi1 {
 	/* Exposed at 40 pin connector */
 	pinctrl-0 = <&spi1_pins>;
 	pinctrl-names = "default";
 	mediatek,pad-select = <0>;
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
 };

 &spi2 {
 	/* Exposed at 40 pin connector */
 	pinctrl-0 = <&spi2_pins>;
 	pinctrl-names = "default";
 	mediatek,pad-select = <0>;
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
 };

 &spmi {
 	#address-cells = <2>;
 	#size-cells = <0>;

 	mt6315_6: pmic@6 {
 		compatible = "mediatek,mt6315-regulator";
 		reg = <0x6 SPMI_USID>;

 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
 				regulator-always-on;
 			};
 		};
 	};

 	mt6315_7: pmic@7 {
 		compatible = "mediatek,mt6315-regulator";
 		reg = <0x7 SPMI_USID>;

 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
 			};
 		};
 	};
 };

 &uart0 {
 	/* Exposed at 40 pin connector */
 	pinctrl-0 = <&uart0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 };

 &uart1 {
 	/* Exposed at 40 pin connector */
 	pinctrl-0 = <&uart1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 };

 &ssusb0 {
 	role-switch-default-mode = "host";
 	usb-role-switch;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";

 	port {
 		mtu3_hs0_role_sw: endpoint {
 			remote-endpoint = <&typec_con_hs>;
 		};
 	};
 };

 &ssusb2 {
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };

 &xhci0 {
 	vbus-supply = <&otg_vbus_regulator>;
 	status = "okay";
 };

 &xhci1 {
 	/* MT7921's USB Bluetooth has issues with USB2 LPM */
 	usb2-lpm-disable;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&vsys>;
 	status = "okay";
 };

 &xhci2 {
 	vbus-supply = <&vsys>;
 	status = "okay";
 };
	// SPDX-License-Identifier: (GPL-2.0 OR MIT)
	/*
	* Copyright (C) 2023 Radxa Limited
	* Copyright (C) 2024 Collabora Ltd.
	* AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
	*/

	#include "mt8195.dtsi"
	#include "mt6359.dtsi"
	#include <dt-bindings/gpio/gpio.h>
	#include <dt-bindings/interrupt-controller/irq.h>
	#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
	#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
	#include <dt-bindings/spmi/spmi.h>
	#include <dt-bindings/usb/pd.h>

	/ {
	model = "Radxa NIO 12L";
	chassis-type = "embedded";
	compatible = "radxa,nio-12l", "mediatek,mt8395", "mediatek,mt8195";

	aliases {
	i2c0 = &i2c2;
	i2c1 = &i2c3;
	i2c2 = &i2c4;
	i2c3 = &i2c0;
	i2c4 = &i2c1;
	ethernet0 = ð
	serial0 = &uart0;
	serial1 = &uart1;
	spi0 = &spi1;
	spi1 = &spi2;
	};

	chosen {
	stdout-path = "serial0:921600n8";
	};

	firmware {
	optee {
	compatible = "linaro,optee-tz";
	method = "smc";
	};
	};

	memory@40000000 {
	device_type = "memory";
	reg = <0 0x40000000 0x1 0x0>;
	};

	wifi_vreg: regulator-wifi-3v3-en {
	compatible = "regulator-fixed";
	regulator-name = "wifi_3v3_en";
	regulator-always-on;
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	enable-active-high;
	gpio = <&pio 67 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&wifi_vreg_pins>;
	vin-supply = <&vsys>;
	};

	/* system wide switching 5.0V power rail */
	vsys: regulator-vsys {
	compatible = "regulator-fixed";
	regulator-name = "vsys";
	regulator-always-on;
	regulator-boot-on;
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	vin-supply = <&vcc5v0_vsys>;
	};

	vsys_buck: regulator-vsys-buck {
	compatible = "regulator-fixed";
	regulator-name = "vsys_buck";
	regulator-always-on;
	regulator-boot-on;
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	vin-supply = <&vcc5v0_vsys>;
	};

	/* Rail from power-only "TYPE C DC" port */
	vcc5v0_vsys: regulator-vcc5v0-sys {
	compatible = "regulator-fixed";
	regulator-name = "vcc5v0_sys";
	regulator-always-on;
	regulator-boot-on;
	};

	reserved-memory {
	#address-cells = <2>;
	#size-cells = <2>;
	ranges;

	/*
	* 12 MiB reserved for OP-TEE (BL32)
	* +-----------------------+ 0x43e0_0000
	* \| SHMEM 2MiB \|
	* +-----------------------+ 0x43c0_0000
	* \| \| TA_RAM 8MiB \|
	* + TZDRAM +--------------+ 0x4340_0000
	* \| \| TEE_RAM 2MiB \|
	* +-----------------------+ 0x4320_0000
	*/
	optee_reserved: optee@43200000 {
	reg = <0 0x43200000 0 0xc00000>;
	no-map;
	};

	scp_mem: memory@50000000 {
	compatible = "shared-dma-pool";
	reg = <0 0x50000000 0 0x2900000>;
	no-map;
	};

	vpu_mem: memory@53000000 {
	compatible = "shared-dma-pool";
	reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
	};

	/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
	bl31_secmon_mem: memory@54600000 {
	reg = <0 0x54600000 0x0 0x200000>;
	no-map;
	};

	afe_mem: memory@60000000 {
	compatible = "shared-dma-pool";
	reg = <0 0x60000000 0 0x1100000>;
	no-map;
	};

	apu_mem: memory@62000000 {
	compatible = "shared-dma-pool";
	reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
	};
	};
	};

	&eth {
	phy-mode = "rgmii-rxid";
	phy-handle = <&rgmii_phy>;
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&eth_default_pins>;
	pinctrl-1 = <&eth_sleep_pins>;
	mediatek,tx-delay-ps = <2030>;
	mediatek,mac-wol;
	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
	snps,reset-delays-us = <0 20000 100000>;
	status = "okay";

	mdio {
	rgmii_phy: ethernet-phy@1 {
	compatible = "ethernet-phy-id001c.c916";
	reg = <0x1>;
	};
	};
	};

	&gpu {
	mali-supply = <&mt6315_7_vbuck1>;
	status = "okay";
	};

	&i2c2 {
	clock-frequency = <400000>;
	pinctrl-0 = <&i2c2_pins>;
	pinctrl-names = "default";
	status = "okay";

	typec-mux@48 {
	compatible = "ite,it5205";
	reg = <0x48>;

	mode-switch;
	orientation-switch;

	vcc-supply = <&mt6359_vibr_ldo_reg>;

	port {
	it5205_sbu_mux: endpoint {
	remote-endpoint = <&typec_con_mux>;
	};
	};
	};
	};

	&i2c4 {
	clock-frequency = <400000>;
	pinctrl-0 = <&i2c4_pins>;
	pinctrl-names = "default";
	status = "okay";

	/* I2C4 exposed at 39-pins MIPI-LCD connector */
	};

	&i2c6 {
	clock-frequency = <400000>;
	pinctrl-0 = <&i2c6_pins>;
	pinctrl-names = "default";
	status = "okay";

	mt6360: pmic@34 {
	compatible = "mediatek,mt6360";
	reg = <0x34>;
	interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
	interrupt-names = "IRQB";
	interrupt-controller;
	#interrupt-cells = <1>;
	pinctrl-0 = <&mt6360_pins>;

	charger {
	compatible = "mediatek,mt6360-chg";
	richtek,vinovp-microvolt = <14500000>;

	otg_vbus_regulator: usb-otg-vbus-regulator {
	regulator-name = "usb-otg-vbus";
	regulator-min-microvolt = <4425000>;
	regulator-max-microvolt = <5825000>;
	};
	};

	regulator {
	compatible = "mediatek,mt6360-regulator";
	LDO_VIN1-supply = <&vsys_buck>;
	LDO_VIN3-supply = <&mt6360_buck2>;

	mt6360_buck1: buck1 {
	regulator-name = "emi_vdd2";
	regulator-min-microvolt = <300000>;
	regulator-max-microvolt = <1300000>;
	regulator-allowed-modes = <MT6360_OPMODE_NORMAL
	MT6360_OPMODE_LP
	MT6360_OPMODE_ULP>;
	regulator-always-on;
	};

	mt6360_buck2: buck2 {
	regulator-name = "emi_vddq";
	regulator-min-microvolt = <300000>;
	regulator-max-microvolt = <1300000>;
	regulator-allowed-modes = <MT6360_OPMODE_NORMAL
	MT6360_OPMODE_LP
	MT6360_OPMODE_ULP>;
	regulator-always-on;
	};

	mt6360_ldo1: ldo1 {
	regulator-name = "ext_lcd_3v3";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-allowed-modes = <MT6360_OPMODE_NORMAL
	MT6360_OPMODE_LP>;
	regulator-always-on;
	};

	mt6360_ldo2: ldo2 {
	regulator-name = "panel1_p1v8";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-allowed-modes = <MT6360_OPMODE_NORMAL
	MT6360_OPMODE_LP>;
	};

	mt6360_ldo3: ldo3 {
	regulator-name = "vmc_pmu";
	regulator-min-microvolt = <1200000>;
	regulator-max-microvolt = <3600000>;
	regulator-allowed-modes = <MT6360_OPMODE_NORMAL
	MT6360_OPMODE_LP>;
	};

	mt6360_ldo5: ldo5 {
	regulator-name = "vmch_pmu";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-allowed-modes = <MT6360_OPMODE_NORMAL
	MT6360_OPMODE_LP>;
	regulator-always-on;
	};

	mt6360_ldo6: ldo6 {
	regulator-name = "mt6360_ldo6"; /* Test point */
	regulator-min-microvolt = <500000>;
	regulator-max-microvolt = <2100000>;
	regulator-allowed-modes = <MT6360_OPMODE_NORMAL
	MT6360_OPMODE_LP>;
	};

	mt6360_ldo7: ldo7 {
	regulator-name = "emi_vmddr_en";
	regulator-min-microvolt = <500000>;
	regulator-max-microvolt = <2100000>;
	regulator-allowed-modes = <MT6360_OPMODE_NORMAL
	MT6360_OPMODE_LP>;
	regulator-always-on;
	};
	};

	typec {
	compatible = "mediatek,mt6360-tcpc";
	interrupts-extended = <&pio 100 IRQ_TYPE_LEVEL_LOW>;
	interrupt-names = "PD_IRQB";

	connector {
	compatible = "usb-c-connector";
	label = "USB-C";
	data-role = "dual";
	op-sink-microwatt = <10000000>;
	power-role = "dual";
	try-power-role = "sink";

	source-pdos = <PDO_FIXED(5000, 1000,
	PDO_FIXED_DUAL_ROLE \|
	PDO_FIXED_DATA_SWAP)>;
	sink-pdos = <PDO_FIXED(5000, 3000,
	PDO_FIXED_DUAL_ROLE \|
	PDO_FIXED_DATA_SWAP)>;

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	port@0 {
	reg = <0>;
	typec_con_hs: endpoint {
	remote-endpoint = <&mtu3_hs0_role_sw>;
	};
	};

	port@2 {
	reg = <2>;
	typec_con_mux: endpoint {
	remote-endpoint = <&it5205_sbu_mux>;
	};
	};
	};
	};
	};
	};
	};

	/* MMC0 Controller: eMMC (HS400). Power lines are shared with UFS! */
	&mmc0 {
	pinctrl-names = "default", "state_uhs";
	pinctrl-0 = <&mmc0_default_pins>;
	pinctrl-1 = <&mmc0_uhs_pins>;
	bus-width = <8>;
	max-frequency = <200000000>;
	hs400-ds-delay = <0x14c11>;
	cap-mmc-highspeed;
	cap-mmc-hw-reset;
	mmc-hs200-1_8v;
	mmc-hs400-1_8v;
	no-sdio;
	no-sd;
	non-removable;
	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
	status = "okay";
	};

	/* MMC1 Controller: MicroSD card slot */
	&mmc1 {
	pinctrl-names = "default", "state_uhs";
	pinctrl-0 = <&mmc1_default_pins>, <&mmc1_pins_detect>;
	pinctrl-1 = <&mmc1_default_pins>;
	bus-width = <4>;
	max-frequency = <200000000>;
	cap-sd-highspeed;
	cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
	no-mmc;
	no-sdio;
	sd-uhs-sdr50;
	sd-uhs-sdr104;
	vmmc-supply = <&mt6360_ldo5>;
	vqmmc-supply = <&mt6360_ldo3>;
	status = "okay";
	};

	&mt6359_vaud18_ldo_reg {
	regulator-always-on;
	};

	&mt6359_vbbck_ldo_reg {
	regulator-always-on;
	};

	/* For USB Hub */
	&mt6359_vcamio_ldo_reg {
	regulator-always-on;
	};

	&mt6359_vcn33_2_bt_ldo_reg {
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	};

	&mt6359_vcore_buck_reg {
	regulator-always-on;
	};

	&mt6359_vgpu11_buck_reg {
	regulator-always-on;
	};

	&mt6359_vproc1_buck_reg {
	regulator-always-on;
	};

	&mt6359_vproc2_buck_reg {
	regulator-always-on;
	};

	&mt6359_vpu_buck_reg {
	regulator-always-on;
	};

	&mt6359_vrf12_ldo_reg {
	regulator-always-on;
	};

	&mt6359_vsram_md_ldo_reg {
	regulator-always-on;
	};

	/* for GPU SRAM */
	&mt6359_vsram_others_ldo_reg {
	regulator-min-microvolt = <750000>;
	regulator-max-microvolt = <750000>;
	};

	&pio {
	eth_default_pins: eth-default-pins {
	pins-cc {
	pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
	<PINMUX_GPIO86__FUNC_GBE_RXC>,
	<PINMUX_GPIO87__FUNC_GBE_RXDV>,
	<PINMUX_GPIO88__FUNC_GBE_TXEN>;
	drive-strength = <8>;
	};

	pins-mdio {
	pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
	<PINMUX_GPIO90__FUNC_GBE_MDIO>;
	input-enable;
	};

	pins-power {
	pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
	<PINMUX_GPIO92__FUNC_GPIO92>;
	output-high;
	};

	pins-rst {
	pinmux = <PINMUX_GPIO93__FUNC_GPIO93>;
	};

	pins-rxd {
	pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
	<PINMUX_GPIO82__FUNC_GBE_RXD2>,
	<PINMUX_GPIO83__FUNC_GBE_RXD1>,
	<PINMUX_GPIO84__FUNC_GBE_RXD0>;
	};

	pins-txd {
	pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
	<PINMUX_GPIO78__FUNC_GBE_TXD2>,
	<PINMUX_GPIO79__FUNC_GBE_TXD1>,
	<PINMUX_GPIO80__FUNC_GBE_TXD0>;
	drive-strength = <8>;
	};
	};

	eth_sleep_pins: eth-sleep-pins {
	pins-cc {
	pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
	<PINMUX_GPIO86__FUNC_GPIO86>,
	<PINMUX_GPIO87__FUNC_GPIO87>,
	<PINMUX_GPIO88__FUNC_GPIO88>;
	};

	pins-mdio {
	pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
	<PINMUX_GPIO90__FUNC_GPIO90>;
	bias-disable;
	input-disable;
	};

	pins-rxd {
	pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
	<PINMUX_GPIO82__FUNC_GPIO82>,
	<PINMUX_GPIO83__FUNC_GPIO83>,
	<PINMUX_GPIO84__FUNC_GPIO84>;
	};

	pins-txd {
	pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
	<PINMUX_GPIO78__FUNC_GPIO78>,
	<PINMUX_GPIO79__FUNC_GPIO79>,
	<PINMUX_GPIO80__FUNC_GPIO80>;
	};
	};

	i2c2_pins: i2c2-pins {
	pins-bus {
	pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
	<PINMUX_GPIO13__FUNC_SCL2>;
	bias-pull-up = <MTK_PULL_SET_RSEL_111>;
	drive-strength = <6>;
	drive-strength-microamp = <1000>;
	};
	};

	i2c4_pins: i2c4-pins {
	pins-bus {
	pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
	<PINMUX_GPIO17__FUNC_SCL4>;
	bias-pull-up = <MTK_PULL_SET_RSEL_111>;
	drive-strength-microamp = <1000>;
	};
	};

	i2c6_pins: i2c6-pins {
	pins {
	pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
	<PINMUX_GPIO26__FUNC_SCL6>;
	bias-pull-up = <MTK_PULL_SET_RSEL_111>;
	};
	};

	mmc0_default_pins: mmc0-default-pins {
	pins-clk {
	pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
	bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
	drive-strength = <6>;
	};

	pins-cmd-dat {
	pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
	<PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
	<PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
	<PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
	<PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
	<PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
	<PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
	<PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
	<PINMUX_GPIO121__FUNC_MSDC0_CMD>;
	bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
	drive-strength = <6>;
	input-enable;
	};

	pins-rst {
	pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
	bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
	drive-strength = <6>;
	};
	};

	mmc0_uhs_pins: mmc0-uhs-pins {
	pins-clk {
	pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
	bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
	drive-strength = <8>;
	};

	pins-cmd-dat {
	pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
	<PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
	<PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
	<PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
	<PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
	<PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
	<PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
	<PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
	<PINMUX_GPIO121__FUNC_MSDC0_CMD>;
	bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
	drive-strength = <8>;
	input-enable;
	};

	pins-ds {
	pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
	bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
	drive-strength = <8>;
	};

	pins-rst {
	pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
	bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
	drive-strength = <8>;
	};
	};

	mmc1_default_pins: mmc1-default-pins {
	pins-clk {
	pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
	bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
	drive-strength = <8>;
	};

	pins-cmd-dat {
	pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
	<PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
	<PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
	<PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
	<PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
	bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
	drive-strength = <8>;
	input-enable;
	};
	};

	mmc1_pins_detect: mmc1-detect-pins {
	pins-insert {
	pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
	bias-pull-up;
	};
	};

	mt6360_pins: mt6360-pins {
	pins-irq {
	pinmux = <PINMUX_GPIO100__FUNC_GPIO100>,
	<PINMUX_GPIO101__FUNC_GPIO101>;
	input-enable;
	bias-pull-up;
	};
	};

	pcie0_default_pins: pcie0-default-pins {
	pins-bus {
	pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
	<PINMUX_GPIO20__FUNC_PERSTN>,
	<PINMUX_GPIO21__FUNC_CLKREQN>;
	bias-pull-up;
	};
	};

	pcie1_default_pins: pcie1-default-pins {
	pins-bus {
	pinmux = <PINMUX_GPIO0__FUNC_PERSTN_1>,
	<PINMUX_GPIO1__FUNC_CLKREQN_1>,
	<PINMUX_GPIO2__FUNC_WAKEN_1>;
	bias-disable;
	};
	};

	spi1_pins: spi1-default-pins {
	pins-bus {
	pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
	<PINMUX_GPIO137__FUNC_SPIM1_CLK>,
	<PINMUX_GPIO138__FUNC_SPIM1_MO>,
	<PINMUX_GPIO139__FUNC_SPIM1_MI>;
	bias-disable;
	};
	};

	spi2_pins: spi2-default-pins {
	pins-bus {
	pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
	<PINMUX_GPIO141__FUNC_SPIM2_CLK>,
	<PINMUX_GPIO142__FUNC_SPIM2_MO>,
	<PINMUX_GPIO143__FUNC_SPIM2_MI>;
	bias-disable;
	};
	};

	uart0_pins: uart0-pins {
	pins-bus {
	pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
	<PINMUX_GPIO99__FUNC_URXD0>;
	};
	};

	uart1_pins: uart1-pins {
	pins-bus {
	pinmux = <PINMUX_GPIO102__FUNC_UTXD1>,
	<PINMUX_GPIO103__FUNC_URXD1>;
	};
	};

	wifi_vreg_pins: wifi-vreg-pins {
	pins-wifi-pmu-en {
	pinmux = <PINMUX_GPIO65__FUNC_GPIO65>;
	output-high;
	};

	pins-wifi-vreg-en {
	pinmux = <PINMUX_GPIO67__FUNC_GPIO67>;
	};
	};
	};

	&pcie0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pcie0_default_pins>;
	status = "okay";
	};

	&pcie1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pcie1_default_pins>;
	status = "okay";
	};

	&pmic {
	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
	};

	&scp {
	memory-region = <&scp_mem>;
	status = "okay";
	};

	&spi1 {
	/* Exposed at 40 pin connector */
	pinctrl-0 = <&spi1_pins>;
	pinctrl-names = "default";
	mediatek,pad-select = <0>;
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";
	};

	&spi2 {
	/* Exposed at 40 pin connector */
	pinctrl-0 = <&spi2_pins>;
	pinctrl-names = "default";
	mediatek,pad-select = <0>;
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";
	};

	&spmi {
	#address-cells = <2>;
	#size-cells = <0>;

	mt6315_6: pmic@6 {
	compatible = "mediatek,mt6315-regulator";
	reg = <0x6 SPMI_USID>;

	regulators {
	mt6315_6_vbuck1: vbuck1 {
	regulator-compatible = "vbuck1";
	regulator-name = "Vbcpu";
	regulator-min-microvolt = <300000>;
	regulator-max-microvolt = <1193750>;
	regulator-enable-ramp-delay = <256>;
	regulator-allowed-modes = <0 1 2>;
	regulator-always-on;
	};
	};
	};

	mt6315_7: pmic@7 {
	compatible = "mediatek,mt6315-regulator";
	reg = <0x7 SPMI_USID>;

	regulators {
	mt6315_7_vbuck1: vbuck1 {
	regulator-compatible = "vbuck1";
	regulator-name = "Vgpu";
	regulator-min-microvolt = <300000>;
	regulator-max-microvolt = <1193750>;
	regulator-enable-ramp-delay = <256>;
	regulator-allowed-modes = <0 1 2>;
	};
	};
	};
	};

	&uart0 {
	/* Exposed at 40 pin connector */
	pinctrl-0 = <&uart0_pins>;
	pinctrl-names = "default";
	status = "okay";
	};

	&uart1 {
	/* Exposed at 40 pin connector */
	pinctrl-0 = <&uart1_pins>;
	pinctrl-names = "default";
	status = "okay";
	};

	&ssusb0 {
	role-switch-default-mode = "host";
	usb-role-switch;
	vusb33-supply = <&mt6359_vusb_ldo_reg>;
	status = "okay";

	port {
	mtu3_hs0_role_sw: endpoint {
	remote-endpoint = <&typec_con_hs>;
	};
	};
	};

	&ssusb2 {
	vusb33-supply = <&mt6359_vusb_ldo_reg>;
	status = "okay";
	};

	&xhci0 {
	vbus-supply = <&otg_vbus_regulator>;
	status = "okay";
	};

	&xhci1 {
	/* MT7921's USB Bluetooth has issues with USB2 LPM */
	usb2-lpm-disable;
	vusb33-supply = <&mt6359_vusb_ldo_reg>;
	vbus-supply = <&vsys>;
	status = "okay";
	};

	&xhci2 {
	vbus-supply = <&vsys>;
	status = "okay";
	};