| /* |
| * sun6i specific clock code |
| * |
| * (C) Copyright 2007-2012 |
| * Allwinner Technology Co., Ltd. <www.allwinnertech.com> |
| * Tom Cubie <tangliang@allwinnertech.com> |
| * |
| * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/prcm.h> |
| #include <asm/arch/sys_proto.h> |
| |
| #ifdef CONFIG_SPL_BUILD |
| void clock_init_safe(void) |
| { |
| struct sunxi_ccm_reg * const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| struct sunxi_prcm_reg * const prcm = |
| (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE; |
| |
| /* Set PLL ldo voltage without this PLL6 does not work properly */ |
| clrsetbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK, |
| PRCM_PLL_CTRL_LDO_KEY); |
| clrsetbits_le32(&prcm->pll_ctrl1, ~PRCM_PLL_CTRL_LDO_KEY_MASK, |
| PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN | |
| PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140)); |
| clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK); |
| |
| clock_set_pll1(408000000); |
| |
| writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div); |
| |
| writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); |
| |
| writel(MBUS_CLK_DEFAULT, &ccm->mbus0_clk_cfg); |
| writel(MBUS_CLK_DEFAULT, &ccm->mbus1_clk_cfg); |
| } |
| #endif |
| |
| void clock_init_uart(void) |
| { |
| struct sunxi_ccm_reg *const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| |
| #if CONFIG_CONS_INDEX < 5 |
| /* uart clock source is apb2 */ |
| writel(APB2_CLK_SRC_OSC24M| |
| APB2_CLK_RATE_N_1| |
| APB2_CLK_RATE_M(1), |
| &ccm->apb2_div); |
| |
| /* open the clock for uart */ |
| setbits_le32(&ccm->apb2_gate, |
| CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT + |
| CONFIG_CONS_INDEX - 1)); |
| |
| /* deassert uart reset */ |
| setbits_le32(&ccm->apb2_reset_cfg, |
| 1 << (APB2_RESET_UART_SHIFT + |
| CONFIG_CONS_INDEX - 1)); |
| #else |
| /* enable R_PIO and R_UART clocks, and de-assert resets */ |
| prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_UART); |
| #endif |
| |
| /* Dup with clock_init_safe(), drop once sun6i SPL support lands */ |
| writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); |
| } |
| |
| int clock_twi_onoff(int port, int state) |
| { |
| struct sunxi_ccm_reg *const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| |
| if (port > 3) |
| return -1; |
| |
| /* set the apb clock gate for twi */ |
| if (state) |
| setbits_le32(&ccm->apb2_gate, |
| CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port)); |
| else |
| clrbits_le32(&ccm->apb2_gate, |
| CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port)); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_SPL_BUILD |
| void clock_set_pll1(unsigned int clk) |
| { |
| struct sunxi_ccm_reg * const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| const int p = 0; |
| int k = 1; |
| int m = 1; |
| |
| if (clk > 1152000000) { |
| k = 2; |
| } else if (clk > 768000000) { |
| k = 3; |
| m = 2; |
| } |
| |
| /* Switch to 24MHz clock while changing PLL1 */ |
| writel(AXI_DIV_3 << AXI_DIV_SHIFT | |
| ATB_DIV_2 << ATB_DIV_SHIFT | |
| CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, |
| &ccm->cpu_axi_cfg); |
| |
| /* |
| * sun6i: PLL1 rate = ((24000000 * n * k) >> 0) / m (p is ignored) |
| * sun8i: PLL1 rate = ((24000000 * n * k) >> p) / m |
| */ |
| writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | |
| CCM_PLL1_CTRL_N(clk / (24000000 * k / m)) | |
| CCM_PLL1_CTRL_K(k) | CCM_PLL1_CTRL_M(m), &ccm->pll1_cfg); |
| sdelay(200); |
| |
| /* Switch CPU to PLL1 */ |
| writel(AXI_DIV_3 << AXI_DIV_SHIFT | |
| ATB_DIV_2 << ATB_DIV_SHIFT | |
| CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, |
| &ccm->cpu_axi_cfg); |
| } |
| #endif |
| |
| void clock_set_pll3(unsigned int clk) |
| { |
| struct sunxi_ccm_reg * const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| const int m = 8; /* 3 MHz steps just like sun4i, sun5i and sun7i */ |
| |
| if (clk == 0) { |
| clrbits_le32(&ccm->pll3_cfg, CCM_PLL3_CTRL_EN); |
| return; |
| } |
| |
| /* PLL3 rate = 24000000 * n / m */ |
| writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE | |
| CCM_PLL3_CTRL_N(clk / (24000000 / m)) | CCM_PLL3_CTRL_M(m), |
| &ccm->pll3_cfg); |
| } |
| |
| void clock_set_pll5(unsigned int clk, bool sigma_delta_enable) |
| { |
| struct sunxi_ccm_reg * const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| const int max_n = 32; |
| int k = 1, m = 2; |
| |
| if (sigma_delta_enable) |
| writel(CCM_PLL5_PATTERN, &ccm->pll5_pattern_cfg); |
| |
| /* PLL5 rate = 24000000 * n * k / m */ |
| if (clk > 24000000 * k * max_n / m) { |
| m = 1; |
| if (clk > 24000000 * k * max_n / m) |
| k = 2; |
| } |
| writel(CCM_PLL5_CTRL_EN | |
| (sigma_delta_enable ? CCM_PLL5_CTRL_SIGMA_DELTA_EN : 0) | |
| CCM_PLL5_CTRL_UPD | |
| CCM_PLL5_CTRL_N(clk / (24000000 * k / m)) | |
| CCM_PLL5_CTRL_K(k) | CCM_PLL5_CTRL_M(m), &ccm->pll5_cfg); |
| |
| udelay(5500); |
| } |
| |
| unsigned int clock_get_pll6(void) |
| { |
| struct sunxi_ccm_reg *const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| uint32_t rval = readl(&ccm->pll6_cfg); |
| int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1; |
| int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1; |
| return 24000000 * n * k / 2; |
| } |
| |
| void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz) |
| { |
| int pll = clock_get_pll6() * 2; |
| int div = 1; |
| |
| while ((pll / div) > hz) |
| div++; |
| |
| writel(CCM_DE_CTRL_GATE | CCM_DE_CTRL_PLL6_2X | CCM_DE_CTRL_M(div), |
| clk_cfg); |
| } |