| if ARCH_ROCKCHIP |
| |
| config ROCKCHIP_PX30 |
| bool "Support Rockchip PX30" |
| select ARM64 |
| select SUPPORT_SPL |
| select SUPPORT_TPL |
| select SPL |
| select TPL |
| select TPL_TINY_FRAMEWORK if TPL |
| select TPL_NEEDS_SEPARATE_STACK if TPL |
| imply SPL_SEPARATE_BSS |
| select SPL_SERIAL |
| select TPL_SERIAL |
| select DEBUG_UART_BOARD_INIT |
| imply ROCKCHIP_COMMON_BOARD |
| imply SPL_ROCKCHIP_COMMON_BOARD |
| help |
| The Rockchip PX30 is a ARM-based SoC with a quad-core Cortex-A35 |
| including NEON and GPU, Mali-400 graphics, several DDR3 options |
| and video codec support. Peripherals include Gigabit Ethernet, |
| USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. |
| |
| config ROCKCHIP_RK3036 |
| bool "Support Rockchip RK3036" |
| select CPU_V7A |
| select SUPPORT_SPL |
| select SPL |
| imply USB_FUNCTION_ROCKUSB |
| imply CMD_ROCKUSB |
| imply ROCKCHIP_COMMON_BOARD |
| help |
| The Rockchip RK3036 is a ARM-based SoC with a dual-core Cortex-A7 |
| including NEON and GPU, Mali-400 graphics, several DDR3 options |
| and video codec support. Peripherals include Gigabit Ethernet, |
| USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. |
| |
| config ROCKCHIP_RK3066 |
| bool "Support Rockchip RK3066" |
| select CPU_V7A |
| select SPL_BOARD_INIT if SPL |
| select SUPPORT_SPL |
| select SUPPORT_TPL |
| select SPL |
| select TPL |
| select TPL_ROCKCHIP_BACK_TO_BROM |
| select TPL_ROCKCHIP_EARLYRETURN_TO_BROM |
| imply ROCKCHIP_COMMON_BOARD |
| imply SPL_ROCKCHIP_COMMON_BOARD |
| imply SPL_SERIAL |
| imply TPL_ROCKCHIP_COMMON_BOARD |
| imply TPL_SERIAL |
| help |
| The Rockchip RK3066 is a ARM-based SoC with a dual-core Cortex-A9 |
| including NEON and GPU, 512KB L2 cache, Mali-400 graphics, two |
| video interfaces, several memory options and video codec support. |
| Peripherals include Fast Ethernet, USB2 host and OTG, SDIO, I2S, |
| UART, SPI, I2C and PWMs. |
| |
| config ROCKCHIP_RK3128 |
| bool "Support Rockchip RK3128" |
| select CPU_V7A |
| imply ROCKCHIP_COMMON_BOARD |
| help |
| The Rockchip RK3128 is a ARM-based SoC with a quad-core Cortex-A7 |
| including NEON and GPU, Mali-400 graphics, several DDR3 options |
| and video codec support. Peripherals include Gigabit Ethernet, |
| USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. |
| |
| config ROCKCHIP_RK3188 |
| bool "Support Rockchip RK3188" |
| select CPU_V7A |
| select SPL_BOARD_INIT if SPL |
| select SUPPORT_SPL |
| select SPL |
| select SPL_CLK |
| select SPL_REGMAP |
| select SPL_SYSCON |
| select SPL_RAM |
| select SPL_DRIVERS_MISC |
| select SPL_ROCKCHIP_EARLYRETURN_TO_BROM |
| select SPL_ROCKCHIP_BACK_TO_BROM |
| select BOARD_LATE_INIT |
| imply ROCKCHIP_COMMON_BOARD |
| imply SPL_ROCKCHIP_COMMON_BOARD |
| help |
| The Rockchip RK3188 is a ARM-based SoC with a quad-core Cortex-A9 |
| including NEON and GPU, 512KB L2 cache, Mali-400 graphics, two |
| video interfaces, several memory options and video codec support. |
| Peripherals include Fast Ethernet, USB2 host and OTG, SDIO, I2S, |
| UART, SPI, I2C and PWMs. |
| |
| config ROCKCHIP_RK322X |
| bool "Support Rockchip RK3228/RK3229" |
| select CPU_V7A |
| select SUPPORT_SPL |
| select SUPPORT_TPL |
| select SPL |
| select SPL_DM |
| select SPL_OF_LIBFDT |
| select TPL |
| select TPL_DM |
| select TPL_OF_LIBFDT |
| select TPL_NEEDS_SEPARATE_STACK if TPL |
| select SPL_DRIVERS_MISC |
| imply ROCKCHIP_COMMON_BOARD |
| imply SPL_SERIAL |
| imply SPL_ROCKCHIP_COMMON_BOARD |
| select SPL_OPTEE_IMAGE if SPL_FIT |
| imply TPL_SERIAL |
| imply TPL_ROCKCHIP_COMMON_BOARD |
| select TPL_LIBCOMMON_SUPPORT |
| select TPL_LIBGENERIC_SUPPORT |
| help |
| The Rockchip RK3229 is a ARM-based SoC with a dual-core Cortex-A7 |
| including NEON and GPU, Mali-400 graphics, several DDR3 options |
| and video codec support. Peripherals include Gigabit Ethernet, |
| USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. |
| |
| config ROCKCHIP_RK3288 |
| bool "Support Rockchip RK3288" |
| select CPU_V7A |
| select OF_SYSTEM_SETUP |
| select SKIP_LOWLEVEL_INIT_ONLY |
| select SUPPORT_SPL |
| select SPL |
| select SUPPORT_TPL |
| select FDT_64BIT |
| imply PRE_CONSOLE_BUFFER |
| imply ROCKCHIP_COMMON_BOARD |
| imply SPL_ROCKCHIP_COMMON_BOARD |
| imply TPL_CLK |
| imply TPL_DM |
| imply TPL_DRIVERS_MISC |
| imply TPL_LIBCOMMON_SUPPORT |
| imply TPL_LIBGENERIC_SUPPORT |
| imply TPL_NEEDS_SEPARATE_STACK |
| imply TPL_OF_CONTROL |
| imply TPL_OF_PLATDATA |
| imply TPL_RAM |
| imply TPL_REGMAP |
| imply TPL_ROCKCHIP_COMMON_BOARD |
| imply TPL_SERIAL |
| imply TPL_SYSCON |
| imply USB_FUNCTION_ROCKUSB |
| imply CMD_ROCKUSB |
| help |
| The Rockchip RK3288 is a ARM-based SoC with a quad-core Cortex-A17 |
| including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two |
| video interfaces supporting HDMI and eDP, several DDR3 options |
| and video codec support. Peripherals include Gigabit Ethernet, |
| USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs. |
| |
| config ROCKCHIP_RK3308 |
| bool "Support Rockchip RK3308" |
| select ARM64 |
| select SUPPORT_SPL |
| select SUPPORT_TPL |
| select SPL |
| select SPL_ATF |
| select SPL_ATF_NO_PLATFORM_PARAM |
| select SPL_LOAD_FIT |
| imply ARMV8_CRYPTO |
| imply ARMV8_SET_SMPEN |
| imply DM_RNG |
| imply LEGACY_IMAGE_FORMAT |
| imply MISC |
| imply MISC_INIT_R |
| imply RNG_ROCKCHIP |
| imply ROCKCHIP_COMMON_BOARD |
| imply ROCKCHIP_OTP |
| imply SPL_CLK |
| imply SPL_DM_SEQ_ALIAS |
| imply SPL_FIT_SIGNATURE |
| imply SPL_PINCTRL |
| imply SPL_RAM |
| imply SPL_REGMAP |
| imply SPL_ROCKCHIP_COMMON_BOARD |
| imply SPL_SEPARATE_BSS |
| imply SPL_SERIAL |
| imply SPL_SYSCON |
| help |
| The Rockchip RK3308 is a ARM-based Soc which embedded with quad |
| Cortex-A35 and highly integrated audio interfaces. |
| |
| config ROCKCHIP_RK3328 |
| bool "Support Rockchip RK3328" |
| select ARM64 |
| select SUPPORT_SPL |
| select SPL |
| select SUPPORT_TPL |
| select TPL |
| select TPL_NEEDS_SEPARATE_STACK if TPL |
| imply ARMV8_CRYPTO |
| imply ARMV8_SET_SMPEN |
| imply MISC |
| imply MISC_INIT_R |
| imply OF_LIVE |
| imply PRE_CONSOLE_BUFFER |
| imply ROCKCHIP_COMMON_BOARD |
| imply ROCKCHIP_EFUSE |
| imply ROCKCHIP_SDRAM_COMMON |
| imply SPL_ROCKCHIP_COMMON_BOARD |
| imply SPL_SEPARATE_BSS |
| imply SPL_SERIAL |
| imply TPL_SERIAL |
| help |
| The Rockchip RK3328 is a ARM-based SoC with a quad-core Cortex-A53. |
| including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two |
| video interfaces supporting HDMI and eDP, several DDR3 options |
| and video codec support. Peripherals include Gigabit Ethernet, |
| USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs. |
| |
| config ROCKCHIP_RK3368 |
| bool "Support Rockchip RK3368" |
| select ARM64 |
| select SUPPORT_SPL |
| select SUPPORT_TPL |
| select TPL_NEEDS_SEPARATE_STACK if TPL |
| imply ROCKCHIP_COMMON_BOARD |
| imply SPL_ROCKCHIP_COMMON_BOARD |
| imply SPL_SEPARATE_BSS |
| imply SPL_SERIAL |
| imply TPL_SERIAL |
| imply TPL_ROCKCHIP_COMMON_BOARD |
| help |
| The Rockchip RK3368 is a ARM-based SoC with a octa-core (organised |
| into a big and little cluster with 4 cores each) Cortex-A53 including |
| AdvSIMD, 512KB L2 cache (for the big cluster) and 256 KB L2 cache |
| (for the little cluster), PowerVR G6110 based graphics, one video |
| output processor supporting LVDS/HDMI/eDP, several DDR3 options and |
| video codec support. |
| |
| On-chip peripherals include Gigabit Ethernet, USB2 host and OTG, SDIO, |
| I2S, UARTs, SPI, I2C and PWMs. |
| |
| config ROCKCHIP_RK3399 |
| bool "Support Rockchip RK3399" |
| select ARM64 |
| select SUPPORT_SPL |
| select SUPPORT_TPL |
| select SPL |
| select SPL_ATF |
| select SPL_BOARD_INIT if SPL |
| select SPL_LOAD_FIT |
| select SPL_CLK if SPL |
| select SPL_PINCTRL if SPL |
| select SPL_RAM if SPL |
| select SPL_REGMAP if SPL |
| select SPL_SYSCON if SPL |
| select TPL_NEEDS_SEPARATE_STACK if TPL |
| select SPL_SEPARATE_BSS |
| select SPL_SERIAL |
| select SPL_DRIVERS_MISC |
| select CLK |
| select FIT |
| select PINCTRL |
| select RAM |
| select REGMAP |
| select SYSCON |
| select DM_PMIC |
| select DM_REGULATOR_FIXED |
| select BOARD_LATE_INIT |
| imply ARMV8_CRYPTO |
| imply ARMV8_SET_SMPEN |
| imply BOOTSTD_FULL |
| imply CMD_BOOTCOUNT if BOOTCOUNT_LIMIT |
| imply DM_RNG |
| imply LEGACY_IMAGE_FORMAT |
| imply MISC |
| imply MISC_INIT_R |
| imply OF_LIVE |
| imply PARTITION_TYPE_GUID |
| imply PHY_GIGE if GMAC_ROCKCHIP |
| imply PRE_CONSOLE_BUFFER |
| imply RNG_ROCKCHIP |
| imply ROCKCHIP_COMMON_BOARD |
| imply ROCKCHIP_EFUSE |
| imply ROCKCHIP_SDRAM_COMMON |
| imply SPL_FIT_SIGNATURE |
| imply SPL_ROCKCHIP_COMMON_BOARD |
| imply SYS_BOOTCOUNT_SINGLEWORD if BOOTCOUNT_LIMIT |
| imply TPL_CLK |
| imply TPL_DM |
| imply TPL_DRIVERS_MISC |
| imply TPL_LIBCOMMON_SUPPORT |
| imply TPL_LIBGENERIC_SUPPORT |
| imply TPL_OF_CONTROL |
| imply TPL_RAM |
| imply TPL_REGMAP |
| imply TPL_ROCKCHIP_COMMON_BOARD |
| imply TPL_SERIAL |
| imply TPL_SYS_MALLOC_SIMPLE |
| imply TPL_SYSCON |
| imply TPL_TINY_MEMSET |
| help |
| The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72 |
| and quad-core Cortex-A53. |
| including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two |
| video interfaces supporting HDMI and eDP, several DDR3 options |
| and video codec support. Peripherals include Gigabit Ethernet, |
| USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs. |
| |
| config ROCKCHIP_RK3568 |
| bool "Support Rockchip RK3568" |
| select ARM64 |
| select SUPPORT_SPL |
| select SPL |
| select CLK |
| select PINCTRL |
| select RAM |
| select REGMAP |
| select SYSCON |
| select BOARD_LATE_INIT |
| select DM_REGULATOR_FIXED |
| select DM_RESET |
| imply BOOTSTD_FULL |
| imply DM_RNG |
| imply MISC_INIT_R |
| imply MMC_HS200_SUPPORT if MMC_SDHCI_ROCKCHIP |
| imply OF_LIBFDT_OVERLAY |
| imply PHY_GIGE if DWC_ETH_QOS_ROCKCHIP |
| imply RNG_ROCKCHIP |
| imply ROCKCHIP_COMMON_BOARD |
| imply ROCKCHIP_OTP |
| imply SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF |
| imply SPL_MMC_HS200_SUPPORT if SPL_MMC && MMC_HS200_SUPPORT |
| help |
| The Rockchip RK3568 is a ARM-based SoC with quad-core Cortex-A55, |
| including NEON and GPU, 512K L3 cache, Mali-G52 based graphics, |
| two video interfaces supporting HDMI and eDP, several DDR3 options |
| and video codec support. Peripherals include Gigabit Ethernet, |
| USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs. |
| |
| config ROCKCHIP_RK3588 |
| bool "Support Rockchip RK3588" |
| select ARM64 |
| select SUPPORT_SPL |
| select SPL |
| select CLK |
| select PINCTRL |
| select RAM |
| select REGMAP |
| select SYSCON |
| select BOARD_LATE_INIT |
| select DM_REGULATOR_FIXED |
| select DM_RESET |
| imply BOOTSTD_FULL |
| imply CLK_SCMI |
| imply DM_RNG |
| imply MISC_INIT_R |
| imply MMC_HS200_SUPPORT if MMC_SDHCI_ROCKCHIP |
| imply OF_LIBFDT_OVERLAY |
| imply PHY_GIGE if DWC_ETH_QOS_ROCKCHIP |
| imply RNG_ROCKCHIP |
| imply ROCKCHIP_COMMON_BOARD |
| imply ROCKCHIP_OTP |
| imply SCMI_FIRMWARE |
| imply SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF |
| imply SPL_MMC_HS200_SUPPORT if SPL_MMC && MMC_HS200_SUPPORT |
| help |
| The Rockchip RK3588 is a ARM-based SoC with quad-core Cortex-A76 and |
| quad-core Cortex-A55 including NEON and GPU, 6TOPS NPU, Mali-G610 MP4, |
| HDMI Out, HDMI In, DP, eDP, MIPI DSI, MIPI CSI2, LPDDR4/4X/5, eMMC5.1, |
| SD3.0/MMC4.5, USB OTG 3.0, Type-C, USB 2.0, PCIe 3.0, SATA 3, Ethernet, |
| SDIO3.0 I2C, UART, SPI, GPIO and PWM. |
| |
| config ROCKCHIP_RV1108 |
| bool "Support Rockchip RV1108" |
| select CPU_V7A |
| imply ROCKCHIP_COMMON_BOARD |
| help |
| The Rockchip RV1108 is a ARM-based SoC with a single-core Cortex-A7 |
| and a DSP. |
| |
| config ROCKCHIP_RV1126 |
| bool "Support Rockchip RV1126" |
| select CPU_V7A |
| select SKIP_LOWLEVEL_INIT_ONLY |
| select TPL |
| select SUPPORT_TPL |
| select TPL_NEEDS_SEPARATE_STACK |
| select TPL_ROCKCHIP_BACK_TO_BROM |
| select SPL |
| select SUPPORT_SPL |
| select SPL_STACK_R |
| select CLK |
| select FIT |
| select PINCTRL |
| select RAM |
| select ROCKCHIP_SDRAM_COMMON |
| select REGMAP |
| select SYSCON |
| select DM_PMIC |
| select DM_REGULATOR_FIXED |
| select DM_RESET |
| select REGULATOR_RK8XX |
| select PMIC_RK8XX |
| select BOARD_LATE_INIT |
| imply ROCKCHIP_COMMON_BOARD |
| select SPL_OPTEE_IMAGE if SPL_FIT |
| imply OF_LIBFDT_OVERLAY |
| imply ROCKCHIP_OTP |
| imply MISC_INIT_R |
| imply TPL_DM |
| imply TPL_LIBCOMMON_SUPPORT |
| imply TPL_LIBGENERIC_SUPPORT |
| imply TPL_OF_CONTROL |
| imply TPL_OF_PLATDATA |
| imply TPL_RAM |
| imply TPL_ROCKCHIP_COMMON_BOARD |
| imply TPL_SERIAL |
| imply SPL_CLK |
| imply SPL_DM |
| imply SPL_DRIVERS_MISC |
| imply SPL_LIBCOMMON_SUPPORT |
| imply SPL_LIBGENERIC_SUPPORT |
| imply SPL_OF_CONTROL |
| imply SPL_RAM |
| imply SPL_REGMAP |
| imply SPL_ROCKCHIP_COMMON_BOARD |
| imply SPL_SERIAL |
| imply SPL_SYSCON |
| |
| config ROCKCHIP_USB_UART |
| bool "Route uart output to usb pins" |
| help |
| Rockchip SoCs have the ability to route the signals of the debug |
| uart through the d+ and d- pins of a specific usb phy to enable |
| some form of closed-case debugging. With this option supported |
| SoCs will enable this routing as a debug measure. |
| |
| config SPL_ROCKCHIP_BACK_TO_BROM |
| bool "SPL returns to bootrom" |
| default y if ROCKCHIP_RK3036 |
| select ROCKCHIP_BROM_HELPER |
| select SPL_BOOTROM_SUPPORT |
| depends on SPL |
| help |
| Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled, |
| SPL will return to the boot rom, which will then load the U-Boot |
| binary to keep going on. |
| |
| config TPL_ROCKCHIP_BACK_TO_BROM |
| bool "TPL returns to bootrom" |
| default y |
| select ROCKCHIP_BROM_HELPER if !ROCKCHIP_RK3066 |
| select TPL_BOOTROM_SUPPORT |
| depends on TPL |
| help |
| Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled, |
| SPL will return to the boot rom, which will then load the U-Boot |
| binary to keep going on. |
| |
| config ROCKCHIP_COMMON_BOARD |
| bool "Rockchip common board file" |
| help |
| Rockchip SoCs have similar boot process, Common board file is mainly |
| in charge of common process of board_init() and board_late_init() for |
| U-Boot proper. |
| |
| config SPL_ROCKCHIP_COMMON_BOARD |
| bool "Rockchip SPL common board file" |
| depends on SPL |
| help |
| Rockchip SoCs have similar boot process, SPL is mainly in charge of |
| load and boot Trust ATF/U-Boot firmware, and DRAM init if there is |
| no TPL for the board. |
| |
| config TPL_ROCKCHIP_COMMON_BOARD |
| bool "Rockchip TPL common board file" |
| depends on TPL |
| help |
| Rockchip SoCs have similar boot process, prefer to use TPL for DRAM |
| init and back to bootrom, and SPL as Trust ATF/U-Boot loader. TPL |
| common board is a basic TPL board init which can be shared for most |
| of SoCs to avoid copy-paste for different SoCs. |
| |
| config ROCKCHIP_EXTERNAL_TPL |
| bool "Use external TPL binary" |
| default y if ROCKCHIP_RK3308 || ROCKCHIP_RK3568 || ROCKCHIP_RK3588 |
| help |
| Some Rockchip SoCs require an external TPL to initialize DRAM. |
| Enable this option and build with ROCKCHIP_TPL=/path/to/ddr.bin to |
| include the external TPL in the image built by binman. |
| |
| config ROCKCHIP_BOOT_MODE_REG |
| hex "Rockchip boot mode flag register address" |
| help |
| The Soc will enter to different boot mode(defined in asm/arch-rockchip/boot_mode.h) |
| according to the value from this register. |
| |
| config ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON |
| bool "Disable device boot on power plug-in" |
| depends on PMIC_RK8XX |
| ---help--- |
| Say Y here to prevent the device from booting up because of a plug-in |
| event. When set, the device will boot briefly to determine why it was |
| powered on, and if it was determined because of a plug-in event |
| instead of a button press event it will shut back off. |
| |
| config ROCKCHIP_STIMER |
| bool "Rockchip STIMER support" |
| default y |
| help |
| Enable Rockchip STIMER support. |
| |
| config ROCKCHIP_STIMER_BASE |
| hex |
| depends on ROCKCHIP_STIMER |
| |
| config ROCKCHIP_SPL_RESERVE_IRAM |
| hex "Size of IRAM reserved in SPL" |
| default 0x0 |
| help |
| SPL may need reserve memory for firmware loaded by SPL, whose load |
| address is in IRAM and may overlay with SPL text area if not |
| reserved. |
| |
| config ROCKCHIP_BROM_HELPER |
| bool |
| |
| config SPL_ROCKCHIP_EARLYRETURN_TO_BROM |
| bool "SPL requires early-return (for RK3188-style BROM) to BROM" |
| depends on SPL && ENABLE_ARM_SOC_BOOT0_HOOK |
| help |
| Some Rockchip BROM variants (e.g. on the RK3188) load the |
| first stage in segments and enter multiple times. E.g. on |
| the RK3188, the first 1KB of the first stage are loaded |
| first and entered; after returning to the BROM, the |
| remainder of the first stage is loaded, but the BROM |
| re-enters at the same address/to the same code as previously. |
| |
| This enables support code in the BOOT0 hook for the SPL stage |
| to allow multiple entries. |
| |
| config ROCKCHIP_DISABLE_FORCE_JTAG |
| bool "Disable force_jtag feature" |
| default y |
| depends on SPL |
| help |
| Rockchip SoCs can automatically switch between jtag and sdmmc based |
| on the following rules: |
| - all the SDMMC pins including SDMMC_DET set as SDMMC function in |
| GRF, |
| - force_jtag bit in GRF is 1, |
| - SDMMC_DET is low (no card detected), |
| |
| Some HW design may not route the SD card card detect to SDMMC_DET |
| pin, thus breaking the SD card support in some cases because JTAG |
| would be auto-enabled by mistake. |
| |
| Also, enabling JTAG at runtime may be an undesired feature, e.g. |
| because it could be a security vulnerability. |
| |
| This disables force_jtag feature, which you may want for debugging |
| purposes. |
| |
| If unsure, say Y. |
| |
| config TPL_ROCKCHIP_EARLYRETURN_TO_BROM |
| bool "TPL requires early-return (for RK3188-style BROM) to BROM" |
| depends on TPL && ENABLE_ARM_SOC_BOOT0_HOOK |
| help |
| Some Rockchip BROM variants (e.g. on the RK3188) load the |
| first stage in segments and enter multiple times. E.g. on |
| the RK3188, the first 1KB of the first stage are loaded |
| first and entered; after returning to the BROM, the |
| remainder of the first stage is loaded, but the BROM |
| re-enters at the same address/to the same code as previously. |
| |
| This enables support code in the BOOT0 hook for the TPL stage |
| to allow multiple entries. |
| |
| config SPL_MMC |
| default y if !SPL_ROCKCHIP_BACK_TO_BROM |
| |
| config ROCKCHIP_SPI_IMAGE |
| bool "Build a SPI image for rockchip" |
| help |
| Some Rockchip SoCs support booting from SPI flash. Enable this |
| option to produce a SPI-flash image containing U-Boot. The image |
| is built by binman. U-Boot sits near the start of the image. |
| |
| config LNX_KRNL_IMG_TEXT_OFFSET_BASE |
| default TEXT_BASE |
| |
| config ROCKCHIP_COMMON_STACK_ADDR |
| bool |
| depends on SPL_SHARES_INIT_SP_ADDR |
| select HAS_CUSTOM_SYS_INIT_SP_ADDR |
| imply SPL_LIBCOMMON_SUPPORT if SPL |
| imply SPL_LIBGENERIC_SUPPORT if SPL |
| imply SPL_ROCKCHIP_COMMON_BOARD if SPL |
| imply SPL_SYS_MALLOC_F if SPL |
| imply SPL_SYS_MALLOC_SIMPLE if SPL |
| imply TPL_LIBCOMMON_SUPPORT if TPL |
| imply TPL_LIBGENERIC_SUPPORT if TPL |
| imply TPL_ROCKCHIP_COMMON_BOARD if TPL |
| imply TPL_SYS_MALLOC_F if TPL |
| imply TPL_SYS_MALLOC_SIMPLE if TPL |
| |
| config NR_DRAM_BANKS |
| default 10 if ROCKCHIP_EXTERNAL_TPL |
| |
| source "arch/arm/mach-rockchip/px30/Kconfig" |
| source "arch/arm/mach-rockchip/rk3036/Kconfig" |
| source "arch/arm/mach-rockchip/rk3066/Kconfig" |
| source "arch/arm/mach-rockchip/rk3128/Kconfig" |
| source "arch/arm/mach-rockchip/rk3188/Kconfig" |
| source "arch/arm/mach-rockchip/rk322x/Kconfig" |
| source "arch/arm/mach-rockchip/rk3288/Kconfig" |
| source "arch/arm/mach-rockchip/rk3308/Kconfig" |
| source "arch/arm/mach-rockchip/rk3328/Kconfig" |
| source "arch/arm/mach-rockchip/rk3368/Kconfig" |
| source "arch/arm/mach-rockchip/rk3399/Kconfig" |
| source "arch/arm/mach-rockchip/rk3568/Kconfig" |
| source "arch/arm/mach-rockchip/rk3588/Kconfig" |
| source "arch/arm/mach-rockchip/rv1108/Kconfig" |
| source "arch/arm/mach-rockchip/rv1126/Kconfig" |
| |
| if ROCKCHIP_COMMON_STACK_ADDR && SPL_SHARES_INIT_SP_ADDR |
| |
| config CUSTOM_SYS_INIT_SP_ADDR |
| default 0x3f00000 |
| |
| config SYS_MALLOC_F_LEN |
| default 0x10000 if CUSTOM_SYS_INIT_SP_ADDR = 0x3f00000 |
| |
| config SPL_SYS_MALLOC_F_LEN |
| default 0x8000 if CUSTOM_SYS_INIT_SP_ADDR = 0x3f00000 |
| |
| config TPL_SYS_MALLOC_F_LEN |
| default 0x4000 if CUSTOM_SYS_INIT_SP_ADDR = 0x3f00000 |
| |
| config TEXT_BASE |
| default 0x00200000 if ARM64 |
| |
| config SPL_TEXT_BASE |
| default 0x0 if ARM64 |
| |
| config SPL_HAS_BSS_LINKER_SECTION |
| default y if ARM64 |
| |
| config SPL_BSS_START_ADDR |
| default 0x3f80000 |
| |
| config SPL_BSS_MAX_SIZE |
| default 0x8000 if SPL_BSS_START_ADDR = 0x3f80000 |
| |
| config SPL_STACK_R |
| default y if CUSTOM_SYS_INIT_SP_ADDR = 0x3f00000 |
| |
| config SPL_STACK_R_ADDR |
| default 0x3e00000 if CUSTOM_SYS_INIT_SP_ADDR = 0x3f00000 |
| |
| config SPL_STACK_R_MALLOC_SIMPLE_LEN |
| default 0x200000 if SPL_STACK_R_ADDR = 0x3e00000 |
| |
| endif |
| endif |