blob: 8add9474ad23c635bcb759624811ed8f4ee81b35 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2016 Nexell
* Hyunseok, Jung <hsjung@nexell.co.kr>
*/
#include <common.h>
#include <command.h>
#include <asm/system.h>
#include <asm/cache.h>
#include <asm/sections.h>
#include <asm/io.h>
#include <asm/arch/nexell.h>
#include <asm/arch/clk.h>
#include <asm/arch/reset.h>
#include <asm/arch/tieoff.h>
#include <cpu_func.h>
#include <linux/delay.h>
DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_ARCH_CPU_INIT
#error must be define the macro "CONFIG_ARCH_CPU_INIT"
#endif
void s_init(void)
{
}
static void cpu_soc_init(void)
{
/*
* NOTE> ALIVE Power Gate must enable for Alive register access.
* must be clear wfi jump address
*/
writel(1, ALIVEPWRGATEREG);
writel(0xFFFFFFFF, SCR_ARM_SECOND_BOOT);
/* write 0xf0 on alive scratchpad reg for boot success check */
writel(readl(SCR_SIGNAGURE_READ) | 0xF0, (SCR_SIGNAGURE_SET));
/* set l2 cache tieoff */
nx_tieoff_set(NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2RET1N_0, 1);
nx_tieoff_set(NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2RET1N_1, 1);
}
#ifdef CONFIG_PL011_SERIAL
static void serial_device_init(void)
{
char dev[10];
int id;
sprintf(dev, "nx-uart.%d", CONFIG_CONS_INDEX);
id = RESET_ID_UART0 + CONFIG_CONS_INDEX;
struct clk *clk = clk_get((const char *)dev);
/* reset control: Low active ___|--- */
nx_rstcon_setrst(id, RSTCON_ASSERT);
udelay(10);
nx_rstcon_setrst(id, RSTCON_NEGATE);
udelay(10);
/* set clock */
clk_disable(clk);
clk_set_rate(clk, CONFIG_PL011_CLOCK);
clk_enable(clk);
}
#endif
int arch_cpu_init(void)
{
flush_dcache_all();
cpu_soc_init();
clk_init();
if (IS_ENABLED(CONFIG_PL011_SERIAL))
serial_device_init();
return 0;
}
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
return 0;
}
#endif
void reset_cpu(ulong ignored)
{
void *clkpwr_reg = (void *)PHY_BASEADDR_CLKPWR;
const u32 sw_rst_enb_bitpos = 3;
const u32 sw_rst_enb_mask = 1 << sw_rst_enb_bitpos;
const u32 sw_rst_bitpos = 12;
const u32 sw_rst_mask = 1 << sw_rst_bitpos;
int pwrcont = 0x224;
int pwrmode = 0x228;
u32 read_value;
read_value = readl((void *)(clkpwr_reg + pwrcont));
read_value &= ~sw_rst_enb_mask;
read_value |= 1 << sw_rst_enb_bitpos;
writel(read_value, (void *)(clkpwr_reg + pwrcont));
writel(sw_rst_mask, (void *)(clkpwr_reg + pwrmode));
}
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
#if defined(CONFIG_ARCH_MISC_INIT)
int arch_misc_init(void)
{
return 0;
}
#endif /* CONFIG_ARCH_MISC_INIT */