| /* |
| * U-boot - blackfin_local.h |
| * |
| * Copyright (c) 2005-2007 Analog Devices Inc. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| */ |
| |
| #ifndef __BLACKFIN_LOCAL_H__ |
| #define __BLACKFIN_LOCAL_H__ |
| |
| #define LO(con32) ((con32) & 0xFFFF) |
| #define lo(con32) ((con32) & 0xFFFF) |
| #define HI(con32) (((con32) >> 16) & 0xFFFF) |
| #define hi(con32) (((con32) >> 16) & 0xFFFF) |
| |
| #define OFFSET_(x) (x & 0x0000FFFF) |
| #define MK_BMSK_(x) (1 << x) |
| |
| /* Ideally this should be USEC not MSEC, but the USEC multiplication |
| * likes to overflow 32bit quantities which is all our assembler |
| * currently supports ;( |
| */ |
| #define USEC_PER_MSEC 1000 |
| #define MSEC_PER_SEC 1000 |
| #define BFIN_SCLK (100000000) |
| #define SCLK_TO_MSEC(sclk) ((MSEC_PER_SEC * ((sclk) / USEC_PER_MSEC)) / (BFIN_SCLK / USEC_PER_MSEC)) |
| #define MSEC_TO_SCLK(msec) ((((BFIN_SCLK / USEC_PER_MSEC) * (msec)) / MSEC_PER_SEC) * USEC_PER_MSEC) |
| |
| #include <asm/linkage.h> |
| |
| #ifndef __ASSEMBLY__ |
| # ifdef SHARED_RESOURCES |
| # include <asm/shared_resources.h> |
| # endif |
| |
| # include <linux/types.h> |
| |
| extern u_long get_vco(void); |
| extern u_long get_cclk(void); |
| extern u_long get_sclk(void); |
| |
| # define bfin_revid() (*pCHIPID >> 28) |
| |
| extern void blackfin_icache_flush_range(const void *, const void *); |
| extern void blackfin_dcache_flush_range(const void *, const void *); |
| extern void blackfin_dcache_flush_invalidate_range(const void *, const void *); |
| |
| /* Use DMA to move data from on chip to external memory. While this is |
| * required for only L1 instruction (it is not directly readable by the |
| * core via data loads), it isn't a huge performance issue for other |
| * regions (it's probably even faster than core load/stores). However, |
| * the DMA engine does not have access to the L1 scratchpad, and we |
| * cannot use DMA inside of the MMR space. |
| */ |
| # define addr_bfin_on_chip_mem(addr) \ |
| (((unsigned long)(addr) >= 0xef000000 && (unsigned long)addr < SYSMMR_BASE) && \ |
| !((unsigned long)(addr) >= L1_SRAM_SCRATCH && \ |
| (unsigned long)(addr) < L1_SRAM_SCRATCH_END)) |
| |
| # include <asm/system.h> |
| |
| #if ANOMALY_05000198 |
| # define NOP_PAD_ANOMALY_05000198 "nop;" |
| #else |
| # define NOP_PAD_ANOMALY_05000198 |
| #endif |
| |
| #define bfin_read8(addr) ({ \ |
| uint8_t __v; \ |
| __asm__ __volatile__( \ |
| NOP_PAD_ANOMALY_05000198 \ |
| "%0 = b[%1] (z);" \ |
| : "=d" (__v) \ |
| : "a" (addr) \ |
| ); \ |
| __v; }) |
| |
| #define bfin_read16(addr) ({ \ |
| uint16_t __v; \ |
| __asm__ __volatile__( \ |
| NOP_PAD_ANOMALY_05000198 \ |
| "%0 = w[%1] (z);" \ |
| : "=d" (__v) \ |
| : "a" (addr) \ |
| ); \ |
| __v; }) |
| |
| #define bfin_read32(addr) ({ \ |
| uint32_t __v; \ |
| __asm__ __volatile__( \ |
| NOP_PAD_ANOMALY_05000198 \ |
| "%0 = [%1];" \ |
| : "=d" (__v) \ |
| : "a" (addr) \ |
| ); \ |
| __v; }) |
| |
| #define bfin_readPTR(addr) bfin_read32(addr) |
| |
| #define bfin_write8(addr, val) \ |
| __asm__ __volatile__( \ |
| NOP_PAD_ANOMALY_05000198 \ |
| "b[%0] = %1;" \ |
| : \ |
| : "a" (addr), "d" (val) \ |
| : "memory" \ |
| ) |
| |
| #define bfin_write16(addr, val) \ |
| __asm__ __volatile__( \ |
| NOP_PAD_ANOMALY_05000198 \ |
| "w[%0] = %1;" \ |
| : \ |
| : "a" (addr), "d" (val) \ |
| : "memory" \ |
| ) |
| |
| #define bfin_write32(addr, val) \ |
| __asm__ __volatile__( \ |
| NOP_PAD_ANOMALY_05000198 \ |
| "[%0] = %1;" \ |
| : \ |
| : "a" (addr), "d" (val) \ |
| : "memory" \ |
| ) |
| |
| #define bfin_writePTR(addr, val) bfin_write32(addr, val) |
| |
| /* SSYNC implementation for C file */ |
| static inline void SSYNC(void) |
| { |
| int _tmp; |
| if (ANOMALY_05000312) |
| __asm__ __volatile__( |
| "cli %0;" |
| "nop;" |
| "nop;" |
| "ssync;" |
| "sti %0;" |
| : "=d" (_tmp) |
| ); |
| else if (ANOMALY_05000244) |
| __asm__ __volatile__( |
| "nop;" |
| "nop;" |
| "nop;" |
| "ssync;" |
| ); |
| else |
| __asm__ __volatile__("ssync;"); |
| } |
| |
| /* CSYNC implementation for C file */ |
| static inline void CSYNC(void) |
| { |
| int _tmp; |
| if (ANOMALY_05000312) |
| __asm__ __volatile__( |
| "cli %0;" |
| "nop;" |
| "nop;" |
| "csync;" |
| "sti %0;" |
| : "=d" (_tmp) |
| ); |
| else if (ANOMALY_05000244) |
| __asm__ __volatile__( |
| "nop;" |
| "nop;" |
| "nop;" |
| "csync;" |
| ); |
| else |
| __asm__ __volatile__("csync;"); |
| } |
| |
| #else /* __ASSEMBLY__ */ |
| |
| /* SSYNC & CSYNC implementations for assembly files */ |
| |
| #define ssync(x) SSYNC(x) |
| #define csync(x) CSYNC(x) |
| |
| #if ANOMALY_05000312 |
| #define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch; |
| #define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch; |
| |
| #elif ANOMALY_05000244 |
| #define SSYNC(scratch) nop; nop; nop; SSYNC; |
| #define CSYNC(scratch) nop; nop; nop; CSYNC; |
| |
| #else |
| #define SSYNC(scratch) SSYNC; |
| #define CSYNC(scratch) CSYNC; |
| |
| #endif /* ANOMALY_05000312 & ANOMALY_05000244 handling */ |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| #endif |