blob: 2173c5255638bdff31fffcbd8b90dbad8ebf37d5 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,sa8775p-tlmm.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Technologies, Inc. SA8775P TLMM block
maintainers:
- Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
description: |
Top Level Mode Multiplexer pin controller in Qualcomm SA8775P SoC.
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
properties:
compatible:
const: qcom,sa8775p-tlmm
reg:
maxItems: 1
interrupts: true
interrupt-controller: true
"#interrupt-cells": true
gpio-controller: true
"#gpio-cells": true
gpio-ranges: true
wakeup-parent: true
gpio-reserved-ranges:
minItems: 1
maxItems: 74
gpio-line-names:
maxItems: 148
required:
- compatible
- reg
additionalProperties: false
patternProperties:
"-state$":
oneOf:
- $ref: "#/$defs/qcom-sa8775p-tlmm-state"
- patternProperties:
"-pins$":
$ref: "#/$defs/qcom-sa8775p-tlmm-state"
additionalProperties: false
$defs:
qcom-sa8775p-tlmm-state:
type: object
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
description:
List of gpio pins affected by the properties specified in this
subnode.
items:
oneOf:
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-7])$"
- enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, ufs_reset ]
minItems: 1
maxItems: 16
function:
description:
Specify the alternative function to be configured for the specified
pins.
enum: [ atest_char, atest_usb2, audio_ref, cam_mclk, cci_async, cci_i2c,
cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
cci_timer5, cci_timer6, cci_timer7, cci_timer8, cci_timer9,
cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, edp0_hot,
edp0_lcd, edp1_hot, edp1_lcd, edp2_hot, edp2_lcd, edp3_hot,
edp3_lcd, emac0_mcg0, emac0_mcg1, emac0_mcg2, emac0_mcg3,
emac0_mdc, emac0_mdio, emac0_ptp_aux, emac0_ptp_pps, emac1_mcg0,
emac1_mcg1, emac1_mcg2, emac1_mcg3, emac1_mdc, emac1_mdio,
emac1_ptp_aux, emac1_ptp_pps, gcc_gp1, gcc_gp2, gcc_gp3,
gcc_gp4, gcc_gp5, gpio, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c,
jitter_bist, mdp0_vsync0, mdp0_vsync1, mdp0_vsync2, mdp0_vsync3,
mdp0_vsync4, mdp0_vsync5, mdp0_vsync6, mdp0_vsync7, mdp0_vsync8,
mdp1_vsync0, mdp1_vsync1, mdp1_vsync2, mdp1_vsync3, mdp1_vsync4,
mdp1_vsync5, mdp1_vsync6, mdp1_vsync7, mdp1_vsync8, mdp_vsync,
mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, mi2s2_data0,
mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, mi2s_mclk1,
pcie0_clkreq, pcie1_clkreq, phase_flag, pll_bist, pll_clk,
prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
qdss_gpio, qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
qup0_se5, qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4,
qup1_se5, qup1_se6, qup2_se0, qup2_se1, qup2_se2, qup2_se3,
qup2_se4, qup2_se5, qup2_se6, qup3_se0, sailss_emac0,
sailss_ospi, sail_top, sgmii_phy, tb_trig, tgu_ch0, tgu_ch1,
tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5, tsense_pwm1, tsense_pwm2,
tsense_pwm3, tsense_pwm4, usb2phy_ac, vsense_trigger ]
required:
- pins
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
tlmm: pinctrl@f000000 {
compatible = "qcom,sa8775p-tlmm";
reg = <0xf000000 0x1000000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 148>;
qup-uart10-state {
pins = "gpio46", "gpio47";
function = "qup1_se3";
};
};
...