Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/ti/davinci/da850-enbw-cmc.dts b/src/arm/ti/davinci/da850-enbw-cmc.dts
new file mode 100644
index 0000000..d4a5237
--- /dev/null
+++ b/src/arm/ti/davinci/da850-enbw-cmc.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for AM1808 EnBW CMC board
+ *
+ * Copyright 2012 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ */
+/dts-v1/;
+#include "da850.dtsi"
+
+/ {
+ compatible = "enbw,cmc", "ti,da850";
+ model = "EnBW CMC";
+
+ soc@1c00000 {
+ serial0: serial@42000 {
+ status = "okay";
+ };
+ serial1: serial@10c000 {
+ status = "okay";
+ };
+ serial2: serial@10d000 {
+ status = "okay";
+ };
+ mdio: mdio@224000 {
+ status = "okay";
+ };
+ eth0: ethernet@220000 {
+ status = "okay";
+ };
+ };
+};
+
+&ref_clk {
+ clock-frequency = <24000000>;
+};
+
+&edma0 {
+ ti,edma-reserved-slot-ranges = <32 50>;
+};
+
+&edma1 {
+ ti,edma-reserved-slot-ranges = <32 90>;
+};
diff --git a/src/arm/ti/davinci/da850-evm.dts b/src/arm/ti/davinci/da850-evm.dts
new file mode 100644
index 0000000..6c59362
--- /dev/null
+++ b/src/arm/ti/davinci/da850-evm.dts
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree for DA850 EVM board
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+#include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "ti,da850-evm", "ti,da850";
+ model = "DA850/AM1808/OMAP-L138 EVM";
+
+ chosen {
+ stdout-path = &serial2;
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ ethernet0 = ð0;
+ spi0 = &spi1;
+ };
+
+ backlight: backlight-pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap2_pins>;
+ power-supply = <&backlight_lcd>;
+ compatible = "pwm-backlight";
+ /*
+ * The PWM here corresponds to production hardware. The
+ * schematic needs to be 1015171 (15 March 2010), Rev A
+ * or newer.
+ */
+ pwms = <&ecap2 0 50000 0>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
+ default-brightness-level = <7>;
+ };
+
+ panel {
+ compatible = "ti,tilcdc,panel";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+ /*
+ * The vpif and the LCD are mutually exclusive.
+ * To enable VPIF, change the status below to 'disabled' then
+ * then change the status of the vpif below to 'okay'
+ */
+ status = "okay";
+ enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
+
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <16>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 480x272 {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <3>;
+ hback-porch = <2>;
+ hsync-len = <42>;
+ vback-porch = <3>;
+ vfront-porch = <4>;
+ vsync-len = <11>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+
+ vbat: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ baseboard_3v3: fixedregulator-3v3 {
+ /* TPS73701DCQ */
+ compatible = "regulator-fixed";
+ regulator-name = "baseboard_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vbat>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ baseboard_1v8: fixedregulator-1v8 {
+ /* TPS73701DCQ */
+ compatible = "regulator-fixed";
+ regulator-name = "baseboard_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vbat>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ backlight_lcd: backlight-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd_backlight_pwr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "DA850-OMAPL138 EVM";
+ simple-audio-card,widgets =
+ "Line", "Line In",
+ "Line", "Line Out";
+ simple-audio-card,routing =
+ "LINE1L", "Line In",
+ "LINE1R", "Line In",
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&link0_codec>;
+ simple-audio-card,frame-master = <&link0_codec>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp0>;
+ system-clock-frequency = <24576000>;
+ };
+
+ link0_codec: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ system-clock-frequency = <24576000>;
+ };
+ };
+};
+
+&ecap2 {
+ status = "okay";
+};
+
+&ref_clk {
+ clock-frequency = <24000000>;
+};
+
+&pmx_core {
+ status = "okay";
+
+ mcasp0_pins: mcasp0-pins {
+ pinctrl-single,bits = <
+ /*
+ * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
+ * AFSR, AMUTE
+ */
+ 0x00 0x11111111 0xffffffff
+ /* AXR11, AXR12 */
+ 0x04 0x00011000 0x000ff000
+ >;
+ };
+ nand_pins: nand-pins {
+ pinctrl-single,bits = <
+ /* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
+ 0x1c 0x10110110 0xf0ff0ff0
+ /*
+ * EMA_D[0], EMA_D[1], EMA_D[2],
+ * EMA_D[3], EMA_D[4], EMA_D[5],
+ * EMA_D[6], EMA_D[7]
+ */
+ 0x24 0x11111111 0xffffffff
+ /* EMA_A[1], EMA_A[2] */
+ 0x30 0x01100000 0x0ff00000
+ >;
+ };
+};
+
+&cpu {
+ cpu-supply = <&vdcdc3_reg>;
+};
+
+/*
+ * The standard da850-evm kits and SOM's are 375MHz so enable this operating
+ * point by default. Higher frequencies must be enabled for custom boards with
+ * other variants of the SoC.
+ */
+&opp_375 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&rtc0 {
+ status = "okay";
+};
+
+&lcdc {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ tps: tps@48 {
+ reg = <0x48>;
+ };
+ tlv320aic3106: tlv320aic3106@18 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x18>;
+ status = "okay";
+
+ /* Regulators */
+ IOVDD-supply = <&vdcdc2_reg>;
+ AVDD-supply = <&baseboard_3v3>;
+ DRVDD-supply = <&baseboard_3v3>;
+ DVDD-supply = <&baseboard_1v8>;
+ };
+ tca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ tca6416_bb: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&wdt {
+ status = "okay";
+};
+
+&mmc0 {
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio 65 GPIO_ACTIVE_HIGH>;
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
+ flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <30000000>;
+ m25p,fast-read;
+ reg = <0>;
+ partition@0 {
+ label = "U-Boot-SPL";
+ reg = <0x00000000 0x00010000>;
+ read-only;
+ };
+ partition@1 {
+ label = "U-Boot";
+ reg = <0x00010000 0x00080000>;
+ read-only;
+ };
+ partition@2 {
+ label = "U-Boot-Env";
+ reg = <0x00090000 0x00010000>;
+ read-only;
+ };
+ partition@3 {
+ label = "Kernel";
+ reg = <0x000a0000 0x00280000>;
+ };
+ partition@4 {
+ label = "Filesystem";
+ reg = <0x00320000 0x00400000>;
+ };
+ partition@5 {
+ label = "MAC-Address";
+ reg = <0x007f0000 0x00010000>;
+ read-only;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+ bus_freq = <2200000>;
+};
+
+ð0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mii_pins>;
+};
+
+&gpio {
+ status = "okay";
+};
+
+/include/ "../../tps6507x.dtsi"
+
+&tps {
+ vdcdc1_2-supply = <&vbat>;
+ vdcdc3-supply = <&vbat>;
+ vldo1_2-supply = <&vbat>;
+
+ regulators {
+ vdcdc1_reg: regulator@0 {
+ regulator-name = "VDCDC1_3.3V";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3450000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdcdc2_reg: regulator@1 {
+ regulator-name = "VDCDC2_3.3V";
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <3450000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,defdcdc_default = <1>;
+ };
+
+ vdcdc3_reg: regulator@2 {
+ regulator-name = "VDCDC3_1.2V";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,defdcdc_default = <1>;
+ };
+
+ ldo1_reg: regulator@3 {
+ regulator-name = "LDO1_1.8V";
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <1890000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ regulator-name = "LDO2_1.2V";
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+};
+
+&mcasp0 {
+ #sound-dai-cells = <0>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp0_pins>;
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializer */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 0 0
+ 0 0 0 0
+ 0 0 0 1
+ 2 0 0 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+&edma0 {
+ ti,edma-reserved-slot-ranges = <32 50>;
+};
+
+&edma1 {
+ ti,edma-reserved-slot-ranges = <32 90>;
+};
+
+&aemif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins>;
+ status = "okay";
+ cs3 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-ranges;
+ ranges;
+
+ ti,cs-chipselect = <3>;
+
+ nand@2000000,0 {
+ compatible = "ti,davinci-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0x02000000 0x02000000
+ 1 0x00000000 0x00008000>;
+
+ ti,davinci-chipselect = <1>;
+ ti,davinci-mask-ale = <0>;
+ ti,davinci-mask-cle = <0>;
+ ti,davinci-mask-chipsel = <0>;
+ ti,davinci-ecc-mode = "hw";
+ ti,davinci-ecc-bits = <4>;
+ ti,davinci-nand-use-bbt;
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&vpif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
+ /*
+ * The vpif and the LCD are mutually exclusive.
+ * To enable VPIF, disable the ti,tilcdc,panel then
+ * change the status below to 'okay'
+ */
+ status = "disabled";
+};
diff --git a/src/arm/ti/davinci/da850-lcdk.dts b/src/arm/ti/davinci/da850-lcdk.dts
new file mode 100644
index 0000000..8390d71
--- /dev/null
+++ b/src/arm/ti/davinci/da850-lcdk.dts
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ */
+/dts-v1/;
+#include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "DA850/AM1808/OMAP-L138 LCDK";
+ compatible = "ti,da850-lcdk", "ti,da850";
+
+ aliases {
+ serial2 = &serial2;
+ ethernet0 = ð0;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory@c0000000 {
+ /* 128 MB DDR2 SDRAM @ 0xc0000000 */
+ reg = <0xc0000000 0x08000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dsp_memory_region: dsp-memory@c3000000 {
+ compatible = "shared-dma-pool";
+ reg = <0xc3000000 0x1000000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
+ vcc_5vd: fixedregulator-vcc_5vd {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_5vd";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ vcc_3v3d: fixedregulator-vcc_3v3d {
+ /* TPS650250 - VDCDC1 */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3d";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_5vd>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_1v8d: fixedregulator-vcc_1v8d {
+ /* TPS650250 - VDCDC2 */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8d";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_5vd>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "DA850-OMAPL138 LCDK";
+ simple-audio-card,widgets =
+ "Line", "Line In",
+ "Line", "Line Out",
+ "Microphone", "Mic Jack";
+ simple-audio-card,routing =
+ "LINE1L", "Line In",
+ "LINE1R", "Line In",
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "MIC3L", "Mic Jack",
+ "MIC3R", "Mic Jack",
+ "Mic Jack", "Mic Bias";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&link0_codec>;
+ simple-audio-card,frame-master = <&link0_codec>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp0>;
+ system-clock-frequency = <24576000>;
+ };
+
+ link0_codec: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ system-clock-frequency = <24576000>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ user1 {
+ label = "GPIO Key USER1";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+ };
+
+ user2 {
+ label = "GPIO Key USER2";
+ linux,code = <BTN_1>;
+ gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ vga-bridge {
+ compatible = "ti,ths8135";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ vga_bridge_in: endpoint {
+ remote-endpoint = <&lcdc_out_vga>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ vga_bridge_out: endpoint {
+ remote-endpoint = <&vga_con_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ ddc-i2c-bus = <&i2c0>;
+
+ port {
+ vga_con_in: endpoint {
+ remote-endpoint = <&vga_bridge_out>;
+ };
+ };
+ };
+
+ cvdd: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "cvdd";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&ref_clk {
+ clock-frequency = <24000000>;
+};
+
+&cpu {
+ cpu-supply = <&cvdd>;
+};
+
+/*
+ * LCDK has a fixed CVDD of 1.3V, so only operating points >= 300MHz are
+ * valid. Unfortunately due to a problem with the DA8XX OHCI controller, we
+ * can't enable more than one OPP by default, since the controller sometimes
+ * becomes unresponsive after a transition. Fix the frequency at 456 MHz.
+ */
+
+&opp_100 {
+ status = "disabled";
+};
+
+&opp_200 {
+ status = "disabled";
+};
+
+&opp_300 {
+ status = "disabled";
+};
+
+&opp_456 {
+ status = "okay";
+};
+
+&pmx_core {
+ status = "okay";
+
+ mcasp0_pins: mcasp0-pins {
+ pinctrl-single,bits = <
+ /* AHCLKX AFSX ACLKX */
+ 0x00 0x00101010 0x00f0f0f0
+ /* ARX13 ARX14 */
+ 0x04 0x00000110 0x00000ff0
+ >;
+ };
+
+ nand_pins: nand-pins {
+ pinctrl-single,bits = <
+ /* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */
+ 0x1c 0x10110010 0xf0ff00f0
+ /*
+ * EMA_D[0], EMA_D[1], EMA_D[2],
+ * EMA_D[3], EMA_D[4], EMA_D[5],
+ * EMA_D[6], EMA_D[7]
+ */
+ 0x24 0x11111111 0xffffffff
+ /*
+ * EMA_D[8], EMA_D[9], EMA_D[10],
+ * EMA_D[11], EMA_D[12], EMA_D[13],
+ * EMA_D[14], EMA_D[15]
+ */
+ 0x20 0x11111111 0xffffffff
+ /* EMA_A[1], EMA_A[2] */
+ 0x30 0x01100000 0x0ff00000
+ >;
+ };
+};
+
+&serial2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&serial2_rxtx_pins>;
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
+
+&rtc0 {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&sata_refclk {
+ status = "okay";
+ clock-frequency = <100000000>;
+};
+
+&sata {
+ status = "okay";
+};
+
+&mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+ bus_freq = <2200000>;
+ status = "okay";
+};
+
+ð0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mii_pins>;
+ status = "okay";
+};
+
+&mmc0 {
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ tlv320aic3106: tlv320aic3106@18 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x18>;
+ adc-settle-ms = <40>;
+ ai3x-micbias-vg = <1>; /* 2.0V */
+ status = "okay";
+
+ /* Regulators */
+ IOVDD-supply = <&vcc_3v3d>;
+ AVDD-supply = <&vcc_3v3d>;
+ DRVDD-supply = <&vcc_3v3d>;
+ DVDD-supply = <&vcc_1v8d>;
+ };
+};
+
+&mcasp0 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp0_pins>;
+ status = "okay";
+
+ op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 0 0
+ 0 0 0 0
+ 0 0 0 0
+ 0 1 2 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&aemif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins>;
+ status = "okay";
+ cs3 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-ranges;
+ ranges;
+
+ ti,cs-chipselect = <3>;
+
+ nand@2000000,0 {
+ compatible = "ti,davinci-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0x02000000 0x02000000
+ 1 0x00000000 0x00008000>;
+
+ ti,davinci-chipselect = <1>;
+ ti,davinci-mask-ale = <0>;
+ ti,davinci-mask-cle = <0>;
+ ti,davinci-mask-chipsel = <0>;
+
+ ti,davinci-nand-buswidth = <16>;
+ ti,davinci-ecc-mode = "hw";
+ ti,davinci-ecc-bits = <4>;
+ ti,davinci-nand-use-bbt;
+
+ /*
+ * The OMAP-L132/L138 Bootloader doc SPRAB41E reads:
+ * "To boot from NAND Flash, the AIS should be written
+ * to NAND block 1 (NAND block 0 is not used by default)".
+ * The same doc mentions that for ROM "Silicon Revision 2.1",
+ * "Updated NAND boot mode to offer boot from block 0 or block 1".
+ * However the limitaion is left here by default for compatibility
+ * with older silicon and because it needs new boot pin settings
+ * not possible in stock LCDK.
+ */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot env";
+ reg = <0 0x020000>;
+ };
+ partition@20000 {
+ /* The LCDK defaults to booting from this partition */
+ label = "u-boot";
+ reg = <0x020000 0x080000>;
+ };
+ partition@a0000 {
+ label = "free space";
+ reg = <0x0a0000 0>;
+ };
+ };
+ };
+ };
+};
+
+&prictrl {
+ status = "okay";
+};
+
+&memctrl {
+ status = "okay";
+};
+
+&lcdc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ port {
+ lcdc_out_vga: endpoint {
+ remote-endpoint = <&vga_bridge_in>;
+ };
+ };
+};
+
+&vpif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vpif_capture_pins>;
+ status = "okay";
+};
+
+&dsp {
+ memory-region = <&dsp_memory_region>;
+ status = "okay";
+};
diff --git a/src/arm/ti/davinci/da850-lego-ev3.dts b/src/arm/ti/davinci/da850-lego-ev3.dts
new file mode 100644
index 0000000..4df1037
--- /dev/null
+++ b/src/arm/ti/davinci/da850-lego-ev3.dts
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device tree for LEGO MINDSTORMS EV3
+ *
+ * Copyright (C) 2017 David Lechner <david@lechnology.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "da850.dtsi"
+
+/ {
+ compatible = "lego,ev3", "ti,da850";
+ model = "LEGO MINDSTORMS EV3";
+
+ aliases {
+ serial1 = &serial1;
+ };
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x04000000>;
+ };
+
+ /*
+ * The buttons on the EV3 are mapped to keyboard keys.
+ */
+ gpio_keys {
+ compatible = "gpio-keys";
+ label = "EV3 Brick Buttons";
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_bias>;
+
+ center {
+ label = "Center";
+ linux,code = <KEY_ENTER>;
+ gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ left {
+ label = "Left";
+ linux,code = <KEY_LEFT>;
+ gpios = <&gpio 102 GPIO_ACTIVE_HIGH>;
+ };
+
+ back {
+ label = "Back";
+ linux,code = <KEY_BACKSPACE>;
+ gpios = <&gpio 106 GPIO_ACTIVE_HIGH>;
+ };
+
+ right {
+ label = "Right";
+ linux,code = <KEY_RIGHT>;
+ gpios = <&gpio 124 GPIO_ACTIVE_HIGH>;
+ };
+
+ down {
+ label = "Down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&gpio 126 GPIO_ACTIVE_HIGH>;
+ };
+
+ up {
+ label = "Up";
+ linux,code = <KEY_UP>;
+ gpios = <&gpio 127 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ /*
+ * The EV3 has two built-in bi-color LEDs behind the buttons.
+ */
+ leds {
+ compatible = "gpio-leds";
+
+ left_green {
+ label = "led0:green:brick-status";
+ /* GP6[13] */
+ gpios = <&gpio 103 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ right_red {
+ label = "led1:red:brick-status";
+ /* GP6[7] */
+ gpios = <&gpio 108 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ left_red {
+ label = "led0:red:brick-status";
+ /* GP6[12] */
+ gpios = <&gpio 109 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ right_green {
+ label = "led1:green:brick-status";
+ /* GP6[14] */
+ gpios = <&gpio 110 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ /*
+ * The EV3 is powered down by turning off the main 5V supply.
+ */
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio 107 GPIO_ACTIVE_LOW>;
+ };
+
+ sound {
+ compatible = "pwm-beeper";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ehrpwm0b_pins>;
+ pwms = <&ehrpwm0 1 1000000 0>;
+ amp-supply = <&>;
+ };
+
+ cvdd: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "cvdd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /*
+ * This is a 5V current limiting regulator that is shared by USB,
+ * the sensor (input) ports, the motor (output) ports and the A/DC.
+ */
+ vcc5v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 101 0>;
+ over-current-gpios = <&gpio 99 GPIO_ACTIVE_LOW>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ /*
+ * This is a simple voltage divider on VCC5V to provide a 2.5V
+ * reference signal to the ADC.
+ */
+ adc_ref: regulator2 {
+ compatible = "regulator-fixed";
+ regulator-name = "adc ref";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-boot-on;
+ vin-supply = <&vcc5v>;
+ };
+
+ /*
+ * This is the amplifier for the speaker.
+ */
+ amp: regulator3 {
+ compatible = "regulator-fixed";
+ regulator-name = "amp";
+ gpio = <&gpio 111 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ /*
+ * The EV3 can use 6-AA batteries or a rechargeable Li-ion battery pack.
+ */
+ battery {
+ compatible = "lego,ev3-battery";
+ io-channels = <&adc 4>, <&adc 3>;
+ io-channel-names = "voltage", "current";
+ rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
+ };
+
+ bt_slow_clk: bt-clock {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap2_pins>, <&bt_clock_bias>;
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&ecap2 0 30518 0>;
+ };
+
+ /* ARM local RAM */
+ memory@ffff0000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0xffff0000 0x2000>; /* 8k */
+
+ /*
+ * The I2C bootloader looks for this magic value to either
+ * boot normally or boot into a firmware update mode.
+ */
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x1ffc>;
+ mode-normal = <0x00000000>;
+ mode-loader = <0x5555aaaa>;
+ };
+ };
+};
+
+&ref_clk {
+ clock-frequency = <24000000>;
+};
+
+&cpu {
+ cpu-supply = <&cvdd>;
+};
+
+/* since we have a fixed regulator, we can't run at these points */
+&opp_100 {
+ status = "disabled";
+};
+
+&opp_200 {
+ status = "disabled";
+};
+
+/*
+ * The SoC is actually the 456MHz version, but because of the fixed regulator
+ * This is the fastest we can go.
+ */
+&opp_375 {
+ status = "okay";
+};
+
+&pmx_core {
+ status = "okay";
+
+ ev3_lcd_pins: lcd-pins {
+ pinctrl-single,bits = <
+ /* SIMO, CLK */
+ 0x14 0x00100100 0x00f00f00
+ >;
+ };
+};
+
+&pinconf {
+ status = "okay";
+
+ /* Buttons have external pulldown resistors */
+ button_bias: button-bias-groups {
+ disable {
+ groups = "cp5", "cp24", "cp25", "cp28";
+ bias-disable;
+ };
+ };
+
+ bt_clock_bias: bt-clock-bias-groups {
+ disable {
+ groups = "cp2";
+ bias-disable;
+ };
+ };
+
+ bt_pic_bias: bt-pic-bias-groups {
+ disable {
+ groups = "cp20";
+ bias-disable;
+ };
+ };
+};
+
+/* Input port 1 */
+&serial1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&serial1_rxtx_pins>;
+};
+
+&serial2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&serial2_rxtx_pins>, <&serial2_rtscts_pins>, <&bt_pic_bias>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "ti,cc2560";
+ clocks = <&bt_slow_clk>;
+ clock-names = "ext_clock";
+ enable-gpios = <&gpio 73 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
+ nvmem-cells = <&bdaddr>;
+ nvmem-cell-names = "bd-address";
+ };
+};
+
+&rtc0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ /*
+ * EEPROM contains the first stage bootloader, HW ID and Bluetooth MAC.
+ */
+ eeprom@50 {
+ compatible = "microchip,24c128", "atmel,24c128";
+ pagesize = <64>;
+ read-only;
+ reg = <0x50>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bdaddr: bdaddr@3f06 {
+ reg = <0x3f06 0x06>;
+ };
+ };
+};
+
+&wdt {
+ status = "okay";
+};
+
+&mmc0 {
+ status = "okay";
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ cd-gpios = <&gpio 94 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>, <&spi0_cs3_pin>;
+
+ flash@0 {
+ compatible = "n25q128a13", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ ti,spi-wdelay = <8>;
+
+ /* Partitions are based on the official firmware from LEGO */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x40000>;
+ };
+
+ partition@40000 {
+ label = "U-Boot Env";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ label = "Kernel";
+ reg = <0x50000 0x200000>;
+ };
+
+ partition@250000 {
+ label = "Filesystem";
+ reg = <0x250000 0xa50000>;
+ };
+
+ partition@cb0000 {
+ label = "Storage";
+ reg = <0xcb0000 0x2f0000>;
+ };
+ };
+ };
+
+ adc: adc@3 {
+ compatible = "ti,ads7957";
+ reg = <3>;
+ #io-channel-cells = <1>;
+ spi-max-frequency = <1000000>;
+ ti,spi-wdelay = <63>;
+ vref-supply = <&adc_ref>;
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-0 = <&ev3_lcd_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+
+ display@0 {
+ compatible = "lego,ev3-lcd";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&ecap2 {
+ status = "okay";
+};
+
+&ehrpwm0 {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+
+ /* Don't pull down battery voltage adc io channel */
+ batt_volt_en {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+
+ /* Don't impede Bluetooth clock signal */
+ bt_clock_en {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_HIGH>;
+ input;
+ };
+
+ /*
+ * There is a PIC microcontroller for interfacing with an Apple MFi
+ * chip. This interferes with normal Bluetooth operation, so we need
+ * to make sure it is turned off. Note: The publicly available
+ * schematics from LEGO don't show that these pins are connected to
+ * anything, but they are present in the source code from LEGO.
+ */
+
+ bt_pic_en {
+ gpio-hog;
+ gpios = <51 GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+
+ bt_pic_rst {
+ gpio-hog;
+ gpios = <78 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+
+ bt_pic_cts {
+ gpio-hog;
+ gpios = <87 GPIO_ACTIVE_HIGH>;
+ input;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+ vbus-supply = <&vcc5v>;
+};
diff --git a/src/arm/ti/davinci/da850.dtsi b/src/arm/ti/davinci/da850.dtsi
new file mode 100644
index 0000000..f759fdf
--- /dev/null
+++ b/src/arm/ti/davinci/da850.dtsi
@@ -0,0 +1,959 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ */
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+ aliases { };
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x0>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu: cpu@0 {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ reg = <0>;
+ clocks = <&psc0 14>;
+ operating-points-v2 = <&opp_table>;
+ };
+ };
+
+ opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp_100: opp100-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ opp-microvolt = <1000000 950000 1050000>;
+ };
+
+ opp_200: opp110-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <1100000 1050000 1160000>;
+ };
+
+ opp_300: opp120-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <1200000 1140000 1320000>;
+ };
+
+ /*
+ * Original silicon was 300MHz max, so higher frequencies
+ * need to be enabled on a per-board basis if the chip is
+ * capable.
+ */
+
+ opp_375: opp120-375000000 {
+ status = "disabled";
+ opp-hz = /bits/ 64 <375000000>;
+ opp-microvolt = <1200000 1140000 1320000>;
+ };
+
+ opp_456: opp130-456000000 {
+ status = "disabled";
+ opp-hz = /bits/ 64 <456000000>;
+ opp-microvolt = <1300000 1250000 1350000>;
+ };
+ };
+
+ arm {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ intc: interrupt-controller@fffee000 {
+ compatible = "ti,cp-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ti,intc-size = <101>;
+ reg = <0xfffee000 0x2000>;
+ };
+ };
+ clocks: clocks {
+ ref_clk: ref_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref_clk";
+ };
+ sata_refclk: sata_refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "sata_refclk";
+ status = "disabled";
+ };
+ usb_refclkin: usb_refclkin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "usb_refclkin";
+ status = "disabled";
+ };
+ };
+ dsp: dsp@11800000 {
+ compatible = "ti,da850-dsp";
+ reg = <0x11800000 0x40000>,
+ <0x11e00000 0x8000>,
+ <0x11f00000 0x8000>,
+ <0x01c14044 0x4>,
+ <0x01c14174 0x8>;
+ reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
+ interrupt-parent = <&intc>;
+ interrupts = <28>;
+ clocks = <&psc0 15>;
+ resets = <&psc0 15>;
+ status = "disabled";
+ };
+ soc@1c00000 {
+ compatible = "simple-bus";
+ model = "da850";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x01c00000 0x400000>;
+ interrupt-parent = <&intc>;
+
+ psc0: clock-controller@10000 {
+ compatible = "ti,da850-psc0";
+ reg = <0x10000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
+ <&pll0_sysclk 4>, <&pll0_sysclk 6>,
+ <&async1_clk>;
+ clock-names = "pll0_sysclk1", "pll0_sysclk2",
+ "pll0_sysclk4", "pll0_sysclk6",
+ "async1";
+ };
+ pll0: clock-controller@11000 {
+ compatible = "ti,da850-pll0";
+ reg = <0x11000 0x1000>;
+ clocks = <&ref_clk>, <&pll1_sysclk 3>;
+ clock-names = "clksrc", "extclksrc";
+
+ pll0_pllout: pllout {
+ #clock-cells = <0>;
+ };
+ pll0_sysclk: sysclk {
+ #clock-cells = <1>;
+ };
+ pll0_auxclk: auxclk {
+ #clock-cells = <0>;
+ };
+ pll0_obsclk: obsclk {
+ #clock-cells = <0>;
+ };
+ };
+ pmx_core: pinmux@14120 {
+ compatible = "pinctrl-single";
+ reg = <0x14120 0x50>;
+ #pinctrl-cells = <2>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xf>;
+ /* pin base, nr pins & gpio function */
+ pinctrl-single,gpio-range = <&range 0 17 0x8>,
+ <&range 17 8 0x4>,
+ <&range 26 8 0x4>,
+ <&range 34 80 0x8>,
+ <&range 129 31 0x8>;
+ status = "disabled";
+
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+
+ serial0_rtscts_pins: serial0-rtscts-pins {
+ pinctrl-single,bits = <
+ /* UART0_RTS UART0_CTS */
+ 0x0c 0x22000000 0xff000000
+ >;
+ };
+ serial0_rxtx_pins: serial0-rxtx-pins {
+ pinctrl-single,bits = <
+ /* UART0_TXD UART0_RXD */
+ 0x0c 0x00220000 0x00ff0000
+ >;
+ };
+ serial1_rtscts_pins: serial1-rtscts-pins {
+ pinctrl-single,bits = <
+ /* UART1_CTS UART1_RTS */
+ 0x00 0x00440000 0x00ff0000
+ >;
+ };
+ serial1_rxtx_pins: serial1-rxtx-pins {
+ pinctrl-single,bits = <
+ /* UART1_TXD UART1_RXD */
+ 0x10 0x22000000 0xff000000
+ >;
+ };
+ serial2_rtscts_pins: serial2-rtscts-pins {
+ pinctrl-single,bits = <
+ /* UART2_CTS UART2_RTS */
+ 0x00 0x44000000 0xff000000
+ >;
+ };
+ serial2_rxtx_pins: serial2-rxtx-pins {
+ pinctrl-single,bits = <
+ /* UART2_TXD UART2_RXD */
+ 0x10 0x00220000 0x00ff0000
+ >;
+ };
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,bits = <
+ /* I2C0_SDA,I2C0_SCL */
+ 0x10 0x00002200 0x0000ff00
+ >;
+ };
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,bits = <
+ /* I2C1_SDA, I2C1_SCL */
+ 0x10 0x00440000 0x00ff0000
+ >;
+ };
+ mmc0_pins: mmc-pins {
+ pinctrl-single,bits = <
+ /* MMCSD0_DAT[3] MMCSD0_DAT[2]
+ * MMCSD0_DAT[1] MMCSD0_DAT[0]
+ * MMCSD0_CMD MMCSD0_CLK
+ */
+ 0x28 0x00222222 0x00ffffff
+ >;
+ };
+ ehrpwm0a_pins: ehrpwm0a-pins {
+ pinctrl-single,bits = <
+ /* EPWM0A */
+ 0xc 0x00000002 0x0000000f
+ >;
+ };
+ ehrpwm0b_pins: ehrpwm0b-pins {
+ pinctrl-single,bits = <
+ /* EPWM0B */
+ 0xc 0x00000020 0x000000f0
+ >;
+ };
+ ehrpwm1a_pins: ehrpwm1a-pins {
+ pinctrl-single,bits = <
+ /* EPWM1A */
+ 0x14 0x00000002 0x0000000f
+ >;
+ };
+ ehrpwm1b_pins: ehrpwm1b-pins {
+ pinctrl-single,bits = <
+ /* EPWM1B */
+ 0x14 0x00000020 0x000000f0
+ >;
+ };
+ ecap0_pins: ecap0-pins {
+ pinctrl-single,bits = <
+ /* ECAP0_APWM0 */
+ 0x8 0x20000000 0xf0000000
+ >;
+ };
+ ecap1_pins: ecap1-pins {
+ pinctrl-single,bits = <
+ /* ECAP1_APWM1 */
+ 0x4 0x40000000 0xf0000000
+ >;
+ };
+ ecap2_pins: ecap2-pins {
+ pinctrl-single,bits = <
+ /* ECAP2_APWM2 */
+ 0x4 0x00000004 0x0000000f
+ >;
+ };
+ spi0_pins: spi0-pins {
+ pinctrl-single,bits = <
+ /* SIMO, SOMI, CLK */
+ 0xc 0x00001101 0x0000ff0f
+ >;
+ };
+ spi0_cs0_pin: spi0-cs0-pins {
+ pinctrl-single,bits = <
+ /* CS0 */
+ 0x10 0x00000010 0x000000f0
+ >;
+ };
+ spi0_cs3_pin: spi0-cs3-pins {
+ pinctrl-single,bits = <
+ /* CS3 */
+ 0xc 0x01000000 0x0f000000
+ >;
+ };
+ spi1_pins: spi1-pins {
+ pinctrl-single,bits = <
+ /* SIMO, SOMI, CLK */
+ 0x14 0x00110100 0x00ff0f00
+ >;
+ };
+ spi1_cs0_pin: spi1-cs0-pins {
+ pinctrl-single,bits = <
+ /* CS0 */
+ 0x14 0x00000010 0x000000f0
+ >;
+ };
+ mdio_pins: mdio-pins {
+ pinctrl-single,bits = <
+ /* MDIO_CLK, MDIO_D */
+ 0x10 0x00000088 0x000000ff
+ >;
+ };
+ mii_pins: mii-pins {
+ pinctrl-single,bits = <
+ /*
+ * MII_TXEN, MII_TXCLK, MII_COL
+ * MII_TXD_3, MII_TXD_2, MII_TXD_1
+ * MII_TXD_0
+ */
+ 0x8 0x88888880 0xfffffff0
+ /*
+ * MII_RXER, MII_CRS, MII_RXCLK
+ * MII_RXDV, MII_RXD_3, MII_RXD_2
+ * MII_RXD_1, MII_RXD_0
+ */
+ 0xc 0x88888888 0xffffffff
+ >;
+ };
+ lcd_pins: lcd-pins {
+ pinctrl-single,bits = <
+ /*
+ * LCD_D[2], LCD_D[3], LCD_D[4], LCD_D[5],
+ * LCD_D[6], LCD_D[7]
+ */
+ 0x40 0x22222200 0xffffff00
+ /*
+ * LCD_D[10], LCD_D[11], LCD_D[12], LCD_D[13],
+ * LCD_D[14], LCD_D[15], LCD_D[0], LCD_D[1]
+ */
+ 0x44 0x22222222 0xffffffff
+ /* LCD_D[8], LCD_D[9] */
+ 0x48 0x00000022 0x000000ff
+
+ /* LCD_PCLK */
+ 0x48 0x02000000 0x0f000000
+ /* LCD_AC_ENB_CS, LCD_VSYNC, LCD_HSYNC */
+ 0x4c 0x02000022 0x0f0000ff
+ >;
+ };
+ vpif_capture_pins: vpif-capture-pins {
+ pinctrl-single,bits = <
+ /* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 */
+ 0x38 0x11111111 0xffffffff
+ /* VP_DIN[10..15,0..1] */
+ 0x3c 0x11111111 0xffffffff
+ /* VP_DIN[8..9] */
+ 0x40 0x00000011 0x000000ff
+ >;
+ };
+ vpif_display_pins: vpif-display-pins {
+ pinctrl-single,bits = <
+ /* VP_DOUT[2..7] */
+ 0x40 0x11111100 0xffffff00
+ /* VP_DOUT[10..15,0..1] */
+ 0x44 0x11111111 0xffffffff
+ /* VP_DOUT[8..9] */
+ 0x48 0x00000011 0x000000ff
+ /*
+ * VP_CLKOUT3, VP_CLKIN3,
+ * VP_CLKOUT2, VP_CLKIN2
+ */
+ 0x4c 0x00111100 0x00ffff00
+ >;
+ };
+ };
+ prictrl: priority-controller@14110 {
+ compatible = "ti,da850-mstpri";
+ reg = <0x14110 0x0c>;
+ status = "disabled";
+ };
+ cfgchip: chip-controller@1417c {
+ compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
+ reg = <0x1417c 0x14>;
+
+ usb_phy: usb-phy {
+ compatible = "ti,da830-usb-phy";
+ #phy-cells = <1>;
+ clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>;
+ clock-names = "usb0_clk48", "usb1_clk48";
+ status = "disabled";
+ };
+ usb_phy_clk: usb-phy-clocks {
+ compatible = "ti,da830-usb-phy-clocks";
+ #clock-cells = <1>;
+ clocks = <&psc1 1>, <&usb_refclkin>,
+ <&pll0_auxclk>;
+ clock-names = "fck", "usb_refclkin", "auxclk";
+ };
+ ehrpwm_tbclk: ehrpwm_tbclk {
+ compatible = "ti,da830-tbclksync";
+ #clock-cells = <0>;
+ clocks = <&psc1 17>;
+ clock-names = "fck";
+ };
+ div4p5_clk: div4.5 {
+ compatible = "ti,da830-div4p5ena";
+ #clock-cells = <0>;
+ clocks = <&pll0_pllout>;
+ clock-names = "pll0_pllout";
+ };
+ async1_clk: async1 {
+ compatible = "ti,da850-async1-clksrc";
+ #clock-cells = <0>;
+ clocks = <&pll0_sysclk 3>, <&div4p5_clk>;
+ clock-names = "pll0_sysclk3", "div4.5";
+ };
+ async3_clk: async3 {
+ compatible = "ti,da850-async3-clksrc";
+ #clock-cells = <0>;
+ clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>;
+ clock-names = "pll0_sysclk2", "pll1_sysclk2";
+ };
+ };
+ edma0: edma@0 {
+ compatible = "ti,edma3-tpcc";
+ /* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
+ reg = <0x0 0x8000>;
+ reg-names = "edma3_cc";
+ interrupts = <11>, <12>;
+ interrupt-names = "edma3_ccint", "edma3_ccerrint";
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
+ power-domains = <&psc0 0>;
+ };
+ edma0_tptc0: tptc@8000 {
+ compatible = "ti,edma3-tptc";
+ reg = <0x8000 0x400>;
+ interrupts = <13>;
+ interrupt-names = "edm3_tcerrint";
+ power-domains = <&psc0 1>;
+ };
+ edma0_tptc1: tptc@8400 {
+ compatible = "ti,edma3-tptc";
+ reg = <0x8400 0x400>;
+ interrupts = <32>;
+ interrupt-names = "edm3_tcerrint";
+ power-domains = <&psc0 2>;
+ };
+ edma1: edma@230000 {
+ compatible = "ti,edma3-tpcc";
+ /* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
+ reg = <0x230000 0x8000>;
+ reg-names = "edma3_cc";
+ interrupts = <93>, <94>;
+ interrupt-names = "edma3_ccint", "edma3_ccerrint";
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma1_tptc0 7>;
+ power-domains = <&psc1 0>;
+ };
+ edma1_tptc0: tptc@238000 {
+ compatible = "ti,edma3-tptc";
+ reg = <0x238000 0x400>;
+ interrupts = <95>;
+ interrupt-names = "edm3_tcerrint";
+ power-domains = <&psc1 21>;
+ };
+ serial0: serial@42000 {
+ compatible = "ti,da830-uart", "ns16550a";
+ reg = <0x42000 0x100>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <25>;
+ clocks = <&psc0 9>;
+ power-domains = <&psc0 9>;
+ status = "disabled";
+ };
+ serial1: serial@10c000 {
+ compatible = "ti,da830-uart", "ns16550a";
+ reg = <0x10c000 0x100>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <53>;
+ clocks = <&psc1 12>;
+ power-domains = <&psc1 12>;
+ status = "disabled";
+ };
+ serial2: serial@10d000 {
+ compatible = "ti,da830-uart", "ns16550a";
+ reg = <0x10d000 0x100>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <61>;
+ clocks = <&psc1 13>;
+ power-domains = <&psc1 13>;
+ status = "disabled";
+ };
+ rtc0: rtc@23000 {
+ compatible = "ti,da830-rtc";
+ reg = <0x23000 0x1000>;
+ interrupts = <19>, <19>;
+ clocks = <&pll0_auxclk>;
+ clock-names = "int-clk";
+ status = "disabled";
+ };
+ i2c0: i2c@22000 {
+ compatible = "ti,davinci-i2c";
+ reg = <0x22000 0x1000>;
+ interrupts = <15>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&pll0_auxclk>;
+ status = "disabled";
+ };
+ i2c1: i2c@228000 {
+ compatible = "ti,davinci-i2c";
+ reg = <0x228000 0x1000>;
+ interrupts = <51>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&psc1 11>;
+ power-domains = <&psc1 11>;
+ status = "disabled";
+ };
+ clocksource: timer@20000 {
+ compatible = "ti,da830-timer";
+ reg = <0x20000 0x1000>;
+ interrupts = <21>, <22>;
+ interrupt-names = "tint12", "tint34";
+ clocks = <&pll0_auxclk>;
+ };
+ wdt: wdt@21000 {
+ compatible = "ti,davinci-wdt";
+ reg = <0x21000 0x1000>;
+ clocks = <&pll0_auxclk>;
+ status = "disabled";
+ };
+ mmc0: mmc@40000 {
+ compatible = "ti,da830-mmc";
+ reg = <0x40000 0x1000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ interrupts = <16>;
+ dmas = <&edma0 16 0>, <&edma0 17 0>;
+ dma-names = "rx", "tx";
+ clocks = <&psc0 5>;
+ status = "disabled";
+ };
+ vpif: video@217000 {
+ compatible = "ti,da850-vpif";
+ reg = <0x217000 0x1000>;
+ interrupts = <92>;
+ power-domains = <&psc1 9>;
+ status = "disabled";
+
+ /* VPIF capture port */
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* VPIF display port */
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ mmc1: mmc@21b000 {
+ compatible = "ti,da830-mmc";
+ reg = <0x21b000 0x1000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ interrupts = <72>;
+ dmas = <&edma1 28 0>, <&edma1 29 0>;
+ dma-names = "rx", "tx";
+ clocks = <&psc1 18>;
+ status = "disabled";
+ };
+ ehrpwm0: pwm@300000 {
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x300000 0x2000>;
+ clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+ clock-names = "fck", "tbclk";
+ power-domains = <&psc1 17>;
+ status = "disabled";
+ };
+ ehrpwm1: pwm@302000 {
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x302000 0x2000>;
+ clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+ clock-names = "fck", "tbclk";
+ power-domains = <&psc1 17>;
+ status = "disabled";
+ };
+ ecap0: pwm@306000 {
+ compatible = "ti,da850-ecap", "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x306000 0x80>;
+ clocks = <&psc1 20>;
+ clock-names = "fck";
+ power-domains = <&psc1 20>;
+ status = "disabled";
+ };
+ ecap1: pwm@307000 {
+ compatible = "ti,da850-ecap", "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x307000 0x80>;
+ clocks = <&psc1 20>;
+ clock-names = "fck";
+ power-domains = <&psc1 20>;
+ status = "disabled";
+ };
+ ecap2: pwm@308000 {
+ compatible = "ti,da850-ecap", "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x308000 0x80>;
+ clocks = <&psc1 20>;
+ clock-names = "fck";
+ power-domains = <&psc1 20>;
+ status = "disabled";
+ };
+ spi0: spi@41000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,da830-spi";
+ reg = <0x41000 0x1000>;
+ num-cs = <6>;
+ ti,davinci-spi-intr-line = <1>;
+ interrupts = <20>;
+ dmas = <&edma0 14 0>, <&edma0 15 0>;
+ dma-names = "rx", "tx";
+ clocks = <&psc0 4>;
+ power-domains = <&psc0 4>;
+ status = "disabled";
+ };
+ spi1: spi@30e000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,da830-spi";
+ reg = <0x30e000 0x1000>;
+ num-cs = <4>;
+ ti,davinci-spi-intr-line = <1>;
+ interrupts = <56>;
+ dmas = <&edma0 18 0>, <&edma0 19 0>;
+ dma-names = "rx", "tx";
+ clocks = <&psc1 10>;
+ power-domains = <&psc1 10>;
+ status = "disabled";
+ };
+ usb0: usb@200000 {
+ compatible = "ti,da830-musb";
+ reg = <0x200000 0x1000>;
+ ranges;
+ interrupts = <58>;
+ interrupt-names = "mc";
+ dr_mode = "otg";
+ phys = <&usb_phy 0>;
+ phy-names = "usb-phy";
+ clocks = <&psc1 1>;
+ clock-ranges;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+ &cppi41dma 2 0 &cppi41dma 3 0
+ &cppi41dma 0 1 &cppi41dma 1 1
+ &cppi41dma 2 1 &cppi41dma 3 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4",
+ "tx1", "tx2", "tx3", "tx4";
+
+ cppi41dma: dma-controller@201000 {
+ compatible = "ti,da830-cppi41";
+ reg = <0x201000 0x1000
+ 0x202000 0x1000
+ 0x204000 0x4000>;
+ reg-names = "controller",
+ "scheduler", "queuemgr";
+ interrupts = <58>;
+ #dma-cells = <2>;
+ /* For backwards compatibility: */
+ #dma-channels = <4>;
+ dma-channels = <4>;
+ power-domains = <&psc1 1>;
+ status = "okay";
+ };
+ };
+ sata: sata@218000 {
+ compatible = "ti,da850-ahci";
+ reg = <0x218000 0x2000>, <0x22c018 0x4>;
+ interrupts = <67>;
+ clocks = <&psc1 8>, <&sata_refclk>;
+ clock-names = "fck", "refclk";
+ status = "disabled";
+ };
+ pll1: clock-controller@21a000 {
+ compatible = "ti,da850-pll1";
+ reg = <0x21a000 0x1000>;
+ clocks = <&ref_clk>;
+ clock-names = "clksrc";
+
+ pll1_sysclk: sysclk {
+ #clock-cells = <1>;
+ };
+ pll1_obsclk: obsclk {
+ #clock-cells = <0>;
+ };
+ };
+ mdio: mdio@224000 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x224000 0x1000>;
+ clocks = <&psc1 5>;
+ clock-names = "fck";
+ power-domains = <&psc1 5>;
+ status = "disabled";
+ };
+ eth0: ethernet@220000 {
+ compatible = "ti,davinci-dm6467-emac";
+ reg = <0x220000 0x4000>;
+ ti,davinci-ctrl-reg-offset = <0x3000>;
+ ti,davinci-ctrl-mod-reg-offset = <0x2000>;
+ ti,davinci-ctrl-ram-offset = <0>;
+ ti,davinci-ctrl-ram-size = <0x2000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <33>, <34>, <35>,<36>;
+ clocks = <&psc1 5>;
+ power-domains = <&psc1 5>;
+ status = "disabled";
+ };
+ usb1: usb@225000 {
+ compatible = "ti,da830-ohci";
+ reg = <0x225000 0x1000>;
+ interrupts = <59>;
+ phys = <&usb_phy 1>;
+ phy-names = "usb-phy";
+ clocks = <&psc1 2>;
+ status = "disabled";
+ };
+ gpio: gpio@226000 {
+ compatible = "ti,dm6441-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x226000 0x1000>;
+ interrupts = <42>, <43>, <44>, <45>, <46>, <47>, <48>, <49>, <50>;
+ ti,ngpio = <144>;
+ ti,davinci-gpio-unbanked = <0>;
+ clocks = <&psc1 3>;
+ clock-names = "gpio";
+ status = "disabled";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&pmx_core 0 15 1>,
+ <&pmx_core 1 14 1>,
+ <&pmx_core 2 13 1>,
+ <&pmx_core 3 12 1>,
+ <&pmx_core 4 11 1>,
+ <&pmx_core 5 10 1>,
+ <&pmx_core 6 9 1>,
+ <&pmx_core 7 8 1>,
+ <&pmx_core 8 7 1>,
+ <&pmx_core 9 6 1>,
+ <&pmx_core 10 5 1>,
+ <&pmx_core 11 4 1>,
+ <&pmx_core 12 3 1>,
+ <&pmx_core 13 2 1>,
+ <&pmx_core 14 1 1>,
+ <&pmx_core 15 0 1>,
+ <&pmx_core 16 39 1>,
+ <&pmx_core 17 38 1>,
+ <&pmx_core 18 37 1>,
+ <&pmx_core 19 36 1>,
+ <&pmx_core 20 35 1>,
+ <&pmx_core 21 34 1>,
+ <&pmx_core 22 33 1>,
+ <&pmx_core 23 32 1>,
+ <&pmx_core 24 24 1>,
+ <&pmx_core 25 22 1>,
+ <&pmx_core 26 21 1>,
+ <&pmx_core 27 20 1>,
+ <&pmx_core 28 19 1>,
+ <&pmx_core 29 18 1>,
+ <&pmx_core 30 17 1>,
+ <&pmx_core 31 16 1>,
+ <&pmx_core 32 55 1>,
+ <&pmx_core 33 54 1>,
+ <&pmx_core 34 53 1>,
+ <&pmx_core 35 52 1>,
+ <&pmx_core 36 51 1>,
+ <&pmx_core 37 50 1>,
+ <&pmx_core 38 49 1>,
+ <&pmx_core 39 48 1>,
+ <&pmx_core 40 47 1>,
+ <&pmx_core 41 46 1>,
+ <&pmx_core 42 45 1>,
+ <&pmx_core 43 44 1>,
+ <&pmx_core 44 43 1>,
+ <&pmx_core 45 42 1>,
+ <&pmx_core 46 41 1>,
+ <&pmx_core 47 40 1>,
+ <&pmx_core 48 71 1>,
+ <&pmx_core 49 70 1>,
+ <&pmx_core 50 69 1>,
+ <&pmx_core 51 68 1>,
+ <&pmx_core 52 67 1>,
+ <&pmx_core 53 66 1>,
+ <&pmx_core 54 65 1>,
+ <&pmx_core 55 64 1>,
+ <&pmx_core 56 63 1>,
+ <&pmx_core 57 62 1>,
+ <&pmx_core 58 61 1>,
+ <&pmx_core 59 60 1>,
+ <&pmx_core 60 59 1>,
+ <&pmx_core 61 58 1>,
+ <&pmx_core 62 57 1>,
+ <&pmx_core 63 56 1>,
+ <&pmx_core 64 87 1>,
+ <&pmx_core 65 86 1>,
+ <&pmx_core 66 85 1>,
+ <&pmx_core 67 84 1>,
+ <&pmx_core 68 83 1>,
+ <&pmx_core 69 82 1>,
+ <&pmx_core 70 81 1>,
+ <&pmx_core 71 80 1>,
+ <&pmx_core 72 70 1>,
+ <&pmx_core 73 78 1>,
+ <&pmx_core 74 77 1>,
+ <&pmx_core 75 76 1>,
+ <&pmx_core 76 75 1>,
+ <&pmx_core 77 74 1>,
+ <&pmx_core 78 73 1>,
+ <&pmx_core 79 72 1>,
+ <&pmx_core 80 103 1>,
+ <&pmx_core 81 102 1>,
+ <&pmx_core 82 101 1>,
+ <&pmx_core 83 100 1>,
+ <&pmx_core 84 99 1>,
+ <&pmx_core 85 98 1>,
+ <&pmx_core 86 97 1>,
+ <&pmx_core 87 96 1>,
+ <&pmx_core 88 95 1>,
+ <&pmx_core 89 94 1>,
+ <&pmx_core 90 93 1>,
+ <&pmx_core 91 92 1>,
+ <&pmx_core 92 91 1>,
+ <&pmx_core 93 90 1>,
+ <&pmx_core 94 89 1>,
+ <&pmx_core 95 88 1>,
+ <&pmx_core 96 158 1>,
+ <&pmx_core 97 157 1>,
+ <&pmx_core 98 156 1>,
+ <&pmx_core 99 155 1>,
+ <&pmx_core 100 154 1>,
+ <&pmx_core 101 129 1>,
+ <&pmx_core 102 113 1>,
+ <&pmx_core 103 112 1>,
+ <&pmx_core 104 111 1>,
+ <&pmx_core 105 110 1>,
+ <&pmx_core 106 109 1>,
+ <&pmx_core 107 108 1>,
+ <&pmx_core 108 107 1>,
+ <&pmx_core 109 106 1>,
+ <&pmx_core 110 105 1>,
+ <&pmx_core 111 104 1>,
+ <&pmx_core 112 145 1>,
+ <&pmx_core 113 144 1>,
+ <&pmx_core 114 143 1>,
+ <&pmx_core 115 142 1>,
+ <&pmx_core 116 141 1>,
+ <&pmx_core 117 140 1>,
+ <&pmx_core 118 139 1>,
+ <&pmx_core 119 138 1>,
+ <&pmx_core 120 137 1>,
+ <&pmx_core 121 136 1>,
+ <&pmx_core 122 135 1>,
+ <&pmx_core 123 134 1>,
+ <&pmx_core 124 133 1>,
+ <&pmx_core 125 132 1>,
+ <&pmx_core 126 131 1>,
+ <&pmx_core 127 130 1>,
+ <&pmx_core 128 159 1>,
+ <&pmx_core 129 31 1>,
+ <&pmx_core 130 30 1>,
+ <&pmx_core 131 20 1>,
+ <&pmx_core 132 28 1>,
+ <&pmx_core 133 27 1>,
+ <&pmx_core 134 26 1>,
+ <&pmx_core 135 23 1>,
+ <&pmx_core 136 153 1>,
+ <&pmx_core 137 152 1>,
+ <&pmx_core 138 151 1>,
+ <&pmx_core 139 150 1>,
+ <&pmx_core 140 149 1>,
+ <&pmx_core 141 148 1>,
+ <&pmx_core 142 147 1>,
+ <&pmx_core 143 146 1>;
+ };
+ psc1: clock-controller@227000 {
+ compatible = "ti,da850-psc1";
+ reg = <0x227000 0x1000>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>,
+ <&async3_clk>;
+ clock-names = "pll0_sysclk2", "pll0_sysclk4", "async3";
+ assigned-clocks = <&async3_clk>;
+ assigned-clock-parents = <&pll1_sysclk 2>;
+ };
+ pinconf: pin-controller@22c00c {
+ compatible = "ti,da850-pupd";
+ reg = <0x22c00c 0x8>;
+ status = "disabled";
+ };
+
+ mcasp0: mcasp@100000 {
+ compatible = "ti,da830-mcasp-audio";
+ reg = <0x100000 0x2000>,
+ <0x102000 0x400000>;
+ reg-names = "mpu", "dat";
+ interrupts = <54>;
+ interrupt-names = "common";
+ power-domains = <&psc1 7>;
+ status = "disabled";
+ dmas = <&edma0 1 1>,
+ <&edma0 0 1>;
+ dma-names = "tx", "rx";
+ };
+
+ lcdc: display@213000 {
+ compatible = "ti,da850-tilcdc";
+ reg = <0x213000 0x1000>;
+ interrupts = <52>;
+ max-pixelclock = <37500>;
+ clocks = <&psc1 16>;
+ clock-names = "fck";
+ power-domains = <&psc1 16>;
+ status = "disabled";
+ };
+ };
+ aemif: aemif@68000000 {
+ compatible = "ti,da850-aemif";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ reg = <0x68000000 0x00008000>;
+ ranges = <0 0 0x60000000 0x08000000
+ 1 0 0x68000000 0x00008000>;
+ clocks = <&psc0 3>;
+ clock-names = "aemif";
+ clock-ranges;
+ status = "disabled";
+ };
+ memctrl: memory-controller@b0000000 {
+ compatible = "ti,da850-ddr-controller";
+ reg = <0xb0000000 0xe8>;
+ status = "disabled";
+ };
+};
diff --git a/src/arm/ti/keystone/keystone-clocks.dtsi b/src/arm/ti/keystone/keystone-clocks.dtsi
new file mode 100644
index 0000000..0397c34
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-clocks.dtsi
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Keystone 2 clock tree
+ *
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mainmuxclk: mainmuxclk@2310108 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-mux-clock";
+ clocks = <&mainpllclk>, <&refclksys>;
+ reg = <0x02310108 4>;
+ bit-shift = <23>;
+ bit-mask = <1>;
+ clock-output-names = "mainmuxclk";
+ };
+
+ chipclk1: chipclk1 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&mainmuxclk>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "chipclk1";
+ };
+
+ chipclk1rstiso: chipclk1rstiso {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&mainmuxclk>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "chipclk1rstiso";
+ };
+
+ gemtraceclk: gemtraceclk@2310120 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-divider-clock";
+ clocks = <&mainmuxclk>;
+ reg = <0x02310120 4>;
+ bit-shift = <0>;
+ bit-mask = <8>;
+ clock-output-names = "gemtraceclk";
+ };
+
+ chipstmxptclk: chipstmxptclk@2310164 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-divider-clock";
+ clocks = <&mainmuxclk>;
+ reg = <0x02310164 4>;
+ bit-shift = <0>;
+ bit-mask = <8>;
+ clock-output-names = "chipstmxptclk";
+ };
+
+ chipclk12: chipclk12 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&chipclk1>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "chipclk12";
+ };
+
+ chipclk13: chipclk13 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&chipclk1>;
+ clock-div = <3>;
+ clock-mult = <1>;
+ clock-output-names = "chipclk13";
+ };
+
+ paclk13: paclk13 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&papllclk>;
+ clock-div = <3>;
+ clock-mult = <1>;
+ clock-output-names = "paclk13";
+ };
+
+ chipclk14: chipclk14 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&chipclk1>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clock-output-names = "chipclk14";
+ };
+
+ chipclk16: chipclk16 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&chipclk1>;
+ clock-div = <6>;
+ clock-mult = <1>;
+ clock-output-names = "chipclk16";
+ };
+
+ chipclk112: chipclk112 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&chipclk1>;
+ clock-div = <12>;
+ clock-mult = <1>;
+ clock-output-names = "chipclk112";
+ };
+
+ chipclk124: chipclk124 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&chipclk1>;
+ clock-div = <24>;
+ clock-mult = <1>;
+ clock-output-names = "chipclk114";
+ };
+
+ chipclk1rstiso13: chipclk1rstiso13 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&chipclk1rstiso>;
+ clock-div = <3>;
+ clock-mult = <1>;
+ clock-output-names = "chipclk1rstiso13";
+ };
+
+ chipclk1rstiso14: chipclk1rstiso14 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&chipclk1rstiso>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clock-output-names = "chipclk1rstiso14";
+ };
+
+ chipclk1rstiso16: chipclk1rstiso16 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&chipclk1rstiso>;
+ clock-div = <6>;
+ clock-mult = <1>;
+ clock-output-names = "chipclk1rstiso16";
+ };
+
+ chipclk1rstiso112: chipclk1rstiso112 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&chipclk1rstiso>;
+ clock-div = <12>;
+ clock-mult = <1>;
+ clock-output-names = "chipclk1rstiso112";
+ };
+
+ clkmodrst0: clkmodrst0@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk16>;
+ clock-output-names = "modrst0";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+
+ clkusb: clkusb@2350008 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk16>;
+ clock-output-names = "usb";
+ reg = <0x02350008 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clkaemifspi: clkaemifspi@235000c {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk16>;
+ clock-output-names = "aemif-spi";
+ reg = <0x0235000c 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+
+ clkdebugsstrc: clkdebugsstrc@2350014 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "debugss-trc";
+ reg = <0x02350014 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <1>;
+ };
+
+ clktetbtrc: clktetbtrc@2350018 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tetb-trc";
+ reg = <0x02350018 0xb00>, <0x02350004 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <1>;
+ };
+
+ clkpa: clkpa@235001c {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&paclk13>;
+ clock-output-names = "pa";
+ reg = <0x0235001c 0xb00>, <0x02350008 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <2>;
+ };
+
+ clkcpgmac: clkcpgmac@2350020 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkpa>;
+ clock-output-names = "cpgmac";
+ reg = <0x02350020 0xb00>, <0x02350008 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <2>;
+ };
+
+ clksa: clksa@2350024 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkpa>;
+ clock-output-names = "sa";
+ reg = <0x02350024 0xb00>, <0x02350008 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <2>;
+ };
+
+ clkpcie: clkpcie@2350028 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk12>;
+ clock-output-names = "pcie";
+ reg = <0x02350028 0xb00>, <0x0235000c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <3>;
+ };
+
+ clksr: clksr@2350034 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1rstiso112>;
+ clock-output-names = "sr";
+ reg = <0x02350034 0xb00>, <0x02350018 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <6>;
+ };
+
+ clkgem0: clkgem0@235003c {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem0";
+ reg = <0x0235003c 0xb00>, <0x02350020 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <8>;
+ };
+
+ clkddr30: clkddr30@235005c {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk12>;
+ clock-output-names = "ddr3-0";
+ reg = <0x0235005c 0xb00>, <0x02350040 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <16>;
+ };
+
+ clkwdtimer0: clkwdtimer0@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkmodrst0>;
+ clock-output-names = "timer0";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clkwdtimer1: clkwdtimer1@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkmodrst0>;
+ clock-output-names = "timer1";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clkwdtimer2: clkwdtimer2@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkmodrst0>;
+ clock-output-names = "timer2";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clkwdtimer3: clkwdtimer3@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkmodrst0>;
+ clock-output-names = "timer3";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clktimer15: clktimer15@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkmodrst0>;
+ clock-output-names = "timer15";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clkuart0: clkuart0@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkmodrst0>;
+ clock-output-names = "uart0";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clkuart1: clkuart1@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkmodrst0>;
+ clock-output-names = "uart1";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clkaemif: clkaemif@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkaemifspi>;
+ clock-output-names = "aemif";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clkusim: clkusim@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkmodrst0>;
+ clock-output-names = "usim";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clki2c: clki2c@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkmodrst0>;
+ clock-output-names = "i2c";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clkspi: clkspi@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkaemifspi>;
+ clock-output-names = "spi";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clkgpio: clkgpio@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkmodrst0>;
+ clock-output-names = "gpio";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clkkeymgr: clkkeymgr@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkmodrst0>;
+ clock-output-names = "keymgr";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ /*
+ * Below are set of fixed, input clocks definitions,
+ * for which real frequencies have to be defined in board files.
+ * Those clocks can be used as reference clocks for some HW modules
+ * (as cpts, for example) by configuring corresponding clock muxes.
+ */
+ timi0: timi0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "timi0";
+ };
+
+ timi1: timi1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "timi1";
+ };
+
+ tsrefclk: tsrefclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "tsrefclk";
+ };
+};
diff --git a/src/arm/ti/keystone/keystone-k2e-clocks.dtsi b/src/arm/ti/keystone/keystone-k2e-clocks.dtsi
new file mode 100644
index 0000000..cf30e00
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-k2e-clocks.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 Edison SoC specific device tree
+ *
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+clocks {
+ mainpllclk: mainpllclk@2310110 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,main-pll-clock";
+ clocks = <&refclksys>;
+ reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+ reg-names = "control", "multiplier", "post-divider";
+ };
+
+ papllclk: papllclk@2620358 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclkpass>;
+ clock-output-names = "papllclk";
+ reg = <0x02620358 4>;
+ reg-names = "control";
+ };
+
+ ddr3apllclk: ddr3apllclk@2620360 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclkddr3a>;
+ clock-output-names = "ddr-3a-pll-clk";
+ reg = <0x02620360 4>;
+ reg-names = "control";
+ };
+
+ clkusb1: clkusb1@2350004 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk16>;
+ clock-output-names = "usb1";
+ reg = <0x02350004 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clkhyperlink0: clkhyperlink0@2350030 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk12>;
+ clock-output-names = "hyperlink-0";
+ reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <5>;
+ };
+
+ clkpcie1: clkpcie1@235006c {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk12>;
+ clock-output-names = "pcie1";
+ reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <18>;
+ };
+
+ clkxge: clkxge@23500c8 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "xge";
+ reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <29>;
+ };
+
+ /*
+ * Below are set of fixed, input clocks definitions,
+ * for which real frequencies have to be defined in board files.
+ * Those clocks can be used as reference clocks for some HW modules
+ * (as cpts, for example) by configuring corresponding clock muxes.
+ */
+ tsipclka: tsipclka {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "tsipclka";
+ };
+
+ tsipclkb: tsipclkb {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "tsipclkb";
+ };
+};
diff --git a/src/arm/ti/keystone/keystone-k2e-evm.dts b/src/arm/ti/keystone/keystone-k2e-evm.dts
new file mode 100644
index 0000000..6978d6a
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-k2e-evm.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 Edison EVM device tree
+ *
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "keystone-k2e.dtsi"
+
+/ {
+ compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone";
+ model = "Texas Instruments Keystone 2 Edison EVM";
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dsp_common_memory: dsp-common-memory@81f800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+ reusable;
+ status = "okay";
+ };
+ };
+};
+
+&soc0 {
+
+ clocks {
+ refclksys: refclksys {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk-sys";
+ };
+
+ refclkpass: refclkpass {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk-pass";
+ };
+
+ refclkddr3a: refclkddr3a {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk-ddr3a";
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&keystone_usb0 {
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "host";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&keystone_usb1 {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "peripheral";
+};
+
+&i2c0 {
+ eeprom@50 {
+ compatible = "atmel,24c1024";
+ reg = <0x50>;
+ };
+};
+
+&aemif {
+ cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-ranges;
+ ranges;
+
+ ti,cs-chipselect = <0>;
+ /* all timings in nanoseconds */
+ ti,cs-min-turnaround-ns = <12>;
+ ti,cs-read-hold-ns = <6>;
+ ti,cs-read-strobe-ns = <23>;
+ ti,cs-read-setup-ns = <9>;
+ ti,cs-write-hold-ns = <8>;
+ ti,cs-write-strobe-ns = <23>;
+ ti,cs-write-setup-ns = <8>;
+
+ nand@0,0 {
+ compatible = "ti,keystone-nand","ti,davinci-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0 0x4000000
+ 1 0 0x0000100>;
+
+ ti,davinci-chipselect = <0>;
+ ti,davinci-mask-ale = <0x2000>;
+ ti,davinci-mask-cle = <0x4000>;
+ ti,davinci-mask-chipsel = <0>;
+ nand-ecc-mode = "hw";
+ ti,davinci-ecc-bits = <4>;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "params";
+ reg = <0x100000 0x80000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "ubifs";
+ reg = <0x180000 0x1fe80000>;
+ };
+ };
+ };
+};
+
+&spi0 {
+ nor_flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
+ spi-max-frequency = <54000000>;
+ m25p,fast-read;
+ reg = <0>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "misc";
+ reg = <0x80000 0xf80000>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+ ethphy0: ethernet-phy@0 {
+ compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&dsp0 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
diff --git a/src/arm/ti/keystone/keystone-k2e-netcp.dtsi b/src/arm/ti/keystone/keystone-k2e-netcp.dtsi
new file mode 100644
index 0000000..bff73a0
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-k2e-netcp.dtsi
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Keystone 2 Edison Netcp driver
+ *
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+qmss: qmss@2a40000 {
+ compatible = "ti,keystone-navigator-qmss";
+ dma-coherent;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&chipclk13>;
+ ranges;
+ queue-range = <0 0x2000>;
+ linkram0 = <0x100000 0x4000>;
+ linkram1 = <0 0x10000>;
+
+ qmgrs {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ qmgr0 {
+ managed-queues = <0 0x2000>;
+ reg = <0x2a40000 0x20000>,
+ <0x2a06000 0x400>,
+ <0x2a02000 0x1000>,
+ <0x2a03000 0x1000>,
+ <0x23a80000 0x20000>,
+ <0x2a80000 0x20000>;
+ reg-names = "peek", "status", "config",
+ "region", "push", "pop";
+ };
+ };
+ queue-pools {
+ qpend {
+ qpend-0 {
+ qrange = <658 8>;
+ interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+ 0 43 0xf04 0 44 0xf04 0 45 0xf04
+ 0 46 0xf04 0 47 0xf04>;
+ };
+ qpend-1 {
+ qrange = <528 16>;
+ interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+ 0 51 0xf04 0 52 0xf04 0 53 0xf04
+ 0 54 0xf04 0 55 0xf04 0 56 0xf04
+ 0 57 0xf04 0 58 0xf04 0 59 0xf04
+ 0 60 0xf04 0 61 0xf04 0 62 0xf04
+ 0 63 0xf04>;
+ qalloc-by-id;
+ };
+ qpend-2 {
+ qrange = <544 16>;
+ interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+ 0 59 0xf04 0 68 0xf04 0 69 0xf04
+ 0 70 0xf04 0 71 0xf04 0 72 0xf04
+ 0 73 0xf04 0 74 0xf04 0 75 0xf04
+ 0 76 0xf04 0 77 0xf04 0 78 0xf04
+ 0 79 0xf04>;
+ };
+ };
+ general-purpose {
+ gp-0 {
+ qrange = <4000 64>;
+ };
+ netcp-tx {
+ qrange = <896 128>;
+ qalloc-by-id;
+ };
+ };
+ accumulator {
+ acc-low-0 {
+ qrange = <480 32>;
+ accumulator = <0 47 16 2 50>;
+ interrupts = <0 226 0xf01>;
+ multi-queue;
+ qalloc-by-id;
+ };
+ };
+ };
+
+ descriptor-regions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ region-12 {
+ id = <12>;
+ region-spec = <8192 128>; /* num_desc desc_size */
+ link-index = <0x4000>;
+ };
+ };
+
+ pdsps {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ pdsp0@2a10000 {
+ reg = <0x2a10000 0x1000 /*iram */
+ 0x2a0f000 0x100 /*reg*/
+ 0x2a0c000 0x3c8 /*intd */
+ 0x2a20000 0x4000>; /*cmd*/
+ id = <0>;
+ };
+ };
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+ compatible = "ti,keystone-navigator-dma";
+ clocks = <&papllclk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,navigator-cloud-address = <0x23a80000 0x23a90000
+ 0x23a80000 0x23a90000>;
+
+ dma_gbe: dma_gbe@0 {
+ reg = <0x24186000 0x100>,
+ <0x24187000 0x2a0>,
+ <0x24188000 0xb60>,
+ <0x24186100 0x80>,
+ <0x24189000 0x1000>;
+ reg-names = "global", "txchan", "rxchan",
+ "txsched", "rxflow";
+ };
+};
+
+netcp: netcp@24000000 {
+ reg = <0x2620110 0x8>;
+ reg-names = "efuse";
+ compatible = "ti,netcp-1.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* NetCP address range */
+ ranges = <0 0x24000000 0x1000000>;
+
+ clocks = <&clkpa>, <&clkcpgmac>;
+ clock-names = "pa_clk", "ethss_clk";
+ dma-coherent;
+
+ ti,navigator-dmas = <&dma_gbe 0>,
+ <&dma_gbe 8>,
+ <&dma_gbe 0>;
+ ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+
+ netcp-devices {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ gbe@200000 { /* ETHSS */
+ label = "netcp-gbe";
+ compatible = "ti,netcp-gbe-9";
+ reg = <0x200000 0x900>, <0x220000 0x20000>;
+ /* enable-ale; */
+ tx-queue = <896>;
+ tx-channel = "nettx";
+
+ cpts {
+ clocks = <&cpts_refclk_mux>;
+ clock-names = "cpts";
+
+ cpts_refclk_mux: cpts-refclk-mux {
+ #clock-cells = <0>;
+ clocks = <&chipclk12>, <&chipclk13>,
+ <&timi0>, <&timi1>,
+ <&tsipclka>, <&tsrefclk>,
+ <&tsipclkb>;
+ ti,mux-tbl = <0x0>, <0x1>, <0x2>,
+ <0x3>, <0x4>, <0x8>, <0xc>;
+ assigned-clocks = <&cpts_refclk_mux>;
+ assigned-clock-parents = <&chipclk12>;
+ };
+ };
+
+ interfaces {
+ gbe0: interface-0 {
+ slave-port = <0>;
+ link-interface = <1>;
+ phy-handle = <ðphy0>;
+ };
+ gbe1: interface-1 {
+ slave-port = <1>;
+ link-interface = <1>;
+ phy-handle = <ðphy1>;
+ };
+ };
+
+ secondary-slave-ports {
+ port-2 {
+ slave-port = <2>;
+ link-interface = <2>;
+ };
+ port-3 {
+ slave-port = <3>;
+ link-interface = <2>;
+ };
+ port-4 {
+ slave-port = <4>;
+ link-interface = <2>;
+ };
+ port-5 {
+ slave-port = <5>;
+ link-interface = <2>;
+ };
+ port-6 {
+ slave-port = <6>;
+ link-interface = <2>;
+ };
+ port-7 {
+ slave-port = <7>;
+ link-interface = <2>;
+ };
+ };
+ };
+ };
+
+ netcp-interfaces {
+ interface-0 {
+ rx-channel = "netrx0";
+ rx-pool = <1024 12>;
+ tx-pool = <1024 12>;
+ rx-queue-depth = <128 128 0 0>;
+ rx-buffer-size = <1518 4096 0 0>;
+ rx-queue = <528>;
+ tx-completion-queue = <530>;
+ efuse-mac = <1>;
+ netcp-gbe = <&gbe0>;
+
+ };
+ interface-1 {
+ rx-channel = "netrx1";
+ rx-pool = <1024 12>;
+ tx-pool = <1024 12>;
+ rx-queue-depth = <128 128 0 0>;
+ rx-buffer-size = <1518 4096 0 0>;
+ rx-queue = <529>;
+ tx-completion-queue = <531>;
+ efuse-mac = <0>;
+ local-mac-address = [02 18 31 7e 3e 00];
+ netcp-gbe = <&gbe1>;
+ };
+ };
+};
+
+sa_subsys: subsys@24080000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0x24080000 0x40000>;
+
+ sa_config: subsys@0 {
+ compatible = "syscon";
+ reg = <0x0 0x100>;
+ };
+
+ rng@24000 {
+ compatible = "ti,keystone-rng";
+ reg = <0x24000 0x1000>;
+ ti,syscon-sa-cfg = <&sa_config>;
+ clocks = <&clksa>;
+ clock-names = "fck";
+ };
+};
diff --git a/src/arm/ti/keystone/keystone-k2e.dtsi b/src/arm/ti/keystone/keystone-k2e.dtsi
new file mode 100644
index 0000000..65c3294
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-k2e.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 Edison soc device tree
+ *
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/reset/ti-syscon.h>
+
+/ {
+ compatible = "ti,k2e", "ti,keystone";
+ model = "Texas Instruments Keystone 2 Edison SoC";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&gic>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ };
+
+ aliases {
+ rproc0 = &dsp0;
+ };
+};
+
+&soc0 {
+ /include/ "keystone-k2e-clocks.dtsi"
+
+ usb: usb@2680000 {
+ interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+ usb@2690000 {
+ interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ usb1_phy: usb_phy@2620750 {
+ compatible = "ti,keystone-usbphy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2620750 24>;
+ status = "disabled";
+ };
+
+ keystone_usb1: usb@25000000 {
+ compatible = "ti,keystone-dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x25000000 0x10000>;
+ clocks = <&clkusb1>;
+ clock-names = "usb";
+ interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
+ ranges;
+ dma-coherent;
+ dma-ranges;
+ status = "disabled";
+
+ usb1: usb@25010000 {
+ compatible = "snps,dwc3";
+ reg = <0x25010000 0x70000>;
+ interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
+ usb-phy = <&usb1_phy>, <&usb1_phy>;
+ };
+ };
+
+ msm_ram: sram@c000000 {
+ compatible = "mmio-sram";
+ reg = <0x0c000000 0x200000>;
+ ranges = <0x0 0x0c000000 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bm-sram@1f0000 {
+ reg = <0x001f0000 0x8000>;
+ };
+ };
+
+ psc: power-sleep-controller@2350000 {
+ pscrst: reset-controller {
+ compatible = "ti,k2e-pscrst", "ti,syscon-reset";
+ #reset-cells = <1>;
+
+ ti,reset-bits = <
+ 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
+ >;
+ };
+ };
+
+ devctrl: device-state-control@2620000 {
+ dspgpio0: keystone_dsp_gpio@240 {
+ compatible = "ti,keystone-dsp-gpio";
+ reg = <0x240 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x240>;
+ };
+ };
+
+ dsp0: dsp@10800000 {
+ compatible = "ti,k2e-dsp";
+ reg = <0x10800000 0x00080000>,
+ <0x10e00000 0x00008000>,
+ <0x10f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem0>;
+ ti,syscon-dev = <&devctrl 0x844>;
+ resets = <&pscrst 0>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <0 8>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio0 27 0>;
+ status = "disabled";
+ };
+
+ pcie1: pcie@21020000 {
+ compatible = "ti,keystone-pcie","snps,dw-pcie";
+ clocks = <&clkpcie1>;
+ clock-names = "pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
+ ranges = <0x82000000 0 0x60000000 0x60000000
+ 0 0x10000000>;
+
+ status = "disabled";
+ device_type = "pci";
+ num-lanes = <2>;
+ bus-range = <0x00 0xff>;
+
+ /* error interrupt */
+ interrupts = <GIC_SPI 385 IRQ_TYPE_EDGE_RISING>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */
+ <0 0 0 2 &pcie_intc1 1>, /* INT B */
+ <0 0 0 3 &pcie_intc1 2>, /* INT C */
+ <0 0 0 4 &pcie_intc1 3>; /* INT D */
+
+ pcie_msi_intc1: msi-interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 379 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 380 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 381 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 382 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 383 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 384 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pcie_intc1: legacy-interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ mdio: mdio@24200f00 {
+ compatible = "ti,keystone_mdio", "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x24200f00 0x100>;
+ status = "disabled";
+ clocks = <&clkcpgmac>;
+ clock-names = "fck";
+ bus_freq = <2500000>;
+ };
+ /include/ "keystone-k2e-netcp.dtsi"
+};
diff --git a/src/arm/ti/keystone/keystone-k2g-evm.dts b/src/arm/ti/keystone/keystone-k2g-evm.dts
new file mode 100644
index 0000000..7bfc80f
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-k2g-evm.dts
@@ -0,0 +1,567 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for K2G EVM
+ *
+ * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "keystone-k2g.dtsi"
+
+/ {
+ compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone";
+ model = "Texas Instruments K2G General Purpose EVM";
+
+ memory@800000000 {
+ device_type = "memory";
+ reg = <0x00000008 0x00000000 0x00000000 0x80000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dsp_common_memory: dsp-common-memory@81f800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
+ vcc3v3_dcin_reg: fixedregulator-vcc3v3-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "mmc0_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcc1v8_ldo1_reg: fixedregulator-vcc1v8-ldo1 {
+ compatible = "regulator-fixed";
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc1v8_ldo2_reg: fixedregulator-vcc1v8-ldo2 {
+ compatible = "regulator-fixed";
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ hdmi: connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&sii9022_out>;
+ };
+ };
+ };
+
+ aud_mclk: aud_mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12288000>;
+ };
+
+ sound0: sound@0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "K2G-EVM";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+
+ simple-audio-card,dai-link@0 {
+ format = "i2s";
+ bitclock-master = <&sound0_0_master>;
+ frame-master = <&sound0_0_master>;
+ sound0_0_master: cpu {
+ sound-dai = <&mcasp2>;
+ clocks = <&k2g_clks 0x6 1>;
+ system-clock-direction-out;
+ };
+
+ codec {
+ sound-dai = <&tlv320aic3106>;
+ clocks = <&aud_mclk>;
+ };
+ };
+
+ simple-audio-card,dai-link@1 {
+ format = "i2s";
+ bitclock-master = <&sound0_1_master>;
+ frame-master = <&sound0_1_master>;
+ sound0_1_master: cpu {
+ sound-dai = <&mcasp2>;
+ clocks = <&k2g_clks 0x6 1>;
+ system-clock-direction-out;
+ };
+
+ codec {
+ sound-dai = <&sii9022>;
+ clocks = <&aud_mclk>;
+ };
+ };
+ };
+};
+
+&k2g_pinctrl {
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ mmc0_pins: mmc0-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1300) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_dat3.mmc0_dat3 */
+ K2G_CORE_IOPAD(0x1304) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_dat2.mmc0_dat2 */
+ K2G_CORE_IOPAD(0x1308) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_dat1.mmc0_dat1 */
+ K2G_CORE_IOPAD(0x130c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_dat0.mmc0_dat0 */
+ K2G_CORE_IOPAD(0x1310) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_clk.mmc0_clk */
+ K2G_CORE_IOPAD(0x1314) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_cmd.mmc0_cmd */
+ K2G_CORE_IOPAD(0x12ec) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* mmc0_sdcd.gpio1_12 */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x10ec) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat7.mmc1_dat7 */
+ K2G_CORE_IOPAD(0x10f0) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat6.mmc1_dat6 */
+ K2G_CORE_IOPAD(0x10f4) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat5.mmc1_dat5 */
+ K2G_CORE_IOPAD(0x10f8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat4.mmc1_dat4 */
+ K2G_CORE_IOPAD(0x10fc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
+ K2G_CORE_IOPAD(0x1100) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
+ K2G_CORE_IOPAD(0x1104) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
+ K2G_CORE_IOPAD(0x1108) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
+ K2G_CORE_IOPAD(0x110c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_clk.mmc1_clk */
+ K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
+ >;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
+
+ ecap0_pins: ecap0-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4) /* pr1_mdio_data.ecap0_in_apwm0_out */
+ >;
+ };
+
+ spi1_pins: spi1-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x11a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_scs0.spi1_scs0 */
+ K2G_CORE_IOPAD(0x11ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_clk.spi1_clk */
+ K2G_CORE_IOPAD(0x11b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_miso.spi1_miso */
+ K2G_CORE_IOPAD(0x11b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_mosi.spi1_mosi */
+ >;
+ };
+
+ qspi_pins: qspi-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */
+ K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */
+ K2G_CORE_IOPAD(0x120c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d0.qspi_d0 */
+ K2G_CORE_IOPAD(0x1210) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d1.qspi_d1 */
+ K2G_CORE_IOPAD(0x1214) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d2.qspi_d2 */
+ K2G_CORE_IOPAD(0x1218) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d3.qspi_d3 */
+ K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x11ec) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* uart2_rxd.uart2_rxd */
+ K2G_CORE_IOPAD(0x11f0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart2_txd.uart2_txd */
+ >;
+ };
+
+ dcan0_pins: dcan0-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x11fc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dcan0tx.dcan0tx */
+ K2G_CORE_IOPAD(0x1200) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* dcan0rx.dcan0rx */
+ >;
+ };
+
+ dcan1_pins: dcan1-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1224) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE1) /* qspicsn2.dcan1tx */
+ K2G_CORE_IOPAD(0x1228) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE1) /* qspicsn3.dcan1rx */
+ >;
+ };
+
+ emac_pins: emac-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x113c) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD1.RGMII_RXD1 */
+ K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD2.RGMII_RXD2 */
+ K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD3.RGMII_RXD3 */
+ K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD0.RGMII_RXD0 */
+ K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD0.RGMII_TXD0 */
+ K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD1.RGMII_TXD1 */
+ K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD2.RGMII_TXD2 */
+ K2G_CORE_IOPAD(0x116c) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD3.RGMII_TXD3 */
+ K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXCLK.RGMII_TXC */
+ K2G_CORE_IOPAD(0x117c) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXEN.RGMII_TXCTL */
+ K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXCLK.RGMII_RXC */
+ K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXDV.RGMII_RXCTL */
+ >;
+ };
+
+ mdio_pins: mdio-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x118c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_CLK.MDIO_CLK */
+ K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_DATA.MDIO_DATA */
+ >;
+ };
+
+ vout_pins: vout-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1078) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata23.dssdata23 */
+ K2G_CORE_IOPAD(0x107c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata22.dssdata22 */
+ K2G_CORE_IOPAD(0x1080) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata21.dssdata21 */
+ K2G_CORE_IOPAD(0x1084) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata20.dssdata20 */
+ K2G_CORE_IOPAD(0x1088) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata19.dssdata19 */
+ K2G_CORE_IOPAD(0x108c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata18.dssdata18 */
+ K2G_CORE_IOPAD(0x1090) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata17.dssdata17 */
+ K2G_CORE_IOPAD(0x1094) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata16.dssdata16 */
+ K2G_CORE_IOPAD(0x1098) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata15.dssdata15 */
+ K2G_CORE_IOPAD(0x109c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata14.dssdata14 */
+ K2G_CORE_IOPAD(0x10a0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata13.dssdata13 */
+ K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata12.dssdata12 */
+ K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata11.dssdata11 */
+ K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata10.dssdata10 */
+ K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata9.dssdata9 */
+ K2G_CORE_IOPAD(0x10b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata8.dssdata8 */
+ K2G_CORE_IOPAD(0x10b8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata7.dssdata7 */
+ K2G_CORE_IOPAD(0x10bc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata6.dssdata6 */
+ K2G_CORE_IOPAD(0x10c0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata5.dssdata5 */
+ K2G_CORE_IOPAD(0x10c4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata4.dssdata4 */
+ K2G_CORE_IOPAD(0x10c8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata3.dssdata3 */
+ K2G_CORE_IOPAD(0x10cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata2.dssdata2 */
+ K2G_CORE_IOPAD(0x10d0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata1.dssdata1 */
+ K2G_CORE_IOPAD(0x10d4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata0.dssdata0 */
+ K2G_CORE_IOPAD(0x10d8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssvsync.dssvsync */
+ K2G_CORE_IOPAD(0x10dc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsshsync.dsshsync */
+ K2G_CORE_IOPAD(0x10e0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsspclk.dsspclk */
+ K2G_CORE_IOPAD(0x10e4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssde.dssde */
+ K2G_CORE_IOPAD(0x10e8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssfid.dssfid */
+ >;
+ };
+
+ mcasp2_pins: mcasp2-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1234) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo2.mcasp2_axr2 */
+ K2G_CORE_IOPAD(0x1238) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo3.mcasp2_axr3 */
+ K2G_CORE_IOPAD(0x1254) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo10.mcasp2_afsx */
+ K2G_CORE_IOPAD(0x125c) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo12.mcasp2_aclkx */
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&vcc3v3_dcin_reg>;
+ vqmmc-supply = <&vcc3v3_dcin_reg>;
+ cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */
+ vqmmc-supply = <&vcc1v8_ldo1_reg>;
+ ti,non-removable;
+ status = "okay";
+};
+
+&dsp0 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c1024";
+ reg = <0x50>;
+ };
+};
+
+&keystone_usb0 {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&keystone_usb1 {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&ecap0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins>;
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ status = "okay";
+
+ spi_nor: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <5000000>;
+ m25p,fast-read;
+ reg = <0>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "misc";
+ reg = <0x100000 0xf00000>;
+ };
+ };
+};
+
+&qspi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_pins>;
+ cdns,rclk-en;
+
+ flash0: flash@0 {
+ compatible = "s25fl512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <96000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cdns,read-delay = <5>;
+ cdns,tshsl-ns = <500>;
+ cdns,tsd2d-ns = <500>;
+ cdns,tchsh-ns = <119>;
+ cdns,tslch-ns = <119>;
+
+ partition@0 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@1 {
+ label = "QSPI.u-boot-env";
+ reg = <0x00100000 0x00040000>;
+ };
+ partition@2 {
+ label = "QSPI.skern";
+ reg = <0x00140000 0x0040000>;
+ };
+ partition@3 {
+ label = "QSPI.pmmc-firmware";
+ reg = <0x00180000 0x0040000>;
+ };
+ partition@4 {
+ label = "QSPI.kernel";
+ reg = <0x001c0000 0x0800000>;
+ };
+ partition@5 {
+ label = "QSPI.file-system";
+ reg = <0x009c0000 0x3640000>;
+ };
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&dcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan0_pins>;
+ status = "okay";
+};
+
+&dcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins>;
+ status = "okay";
+};
+
+&qmss {
+ status = "okay";
+};
+
+&knav_dmas {
+ status = "okay";
+};
+
+&mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+ status = "okay";
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&gbe0 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-rxid";
+ status = "okay";
+};
+
+&netcp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+ clock-frequency = <400000>;
+
+ sii9022: sii9022@3b {
+ #sound-dai-cells = <0>;
+ compatible = "sil,sii9022";
+ reg = <0x3b>;
+
+ sil,i2s-data-lanes = < 0 >;
+ clocks = <&aud_mclk>;
+ clock-names = "mclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ sii9022_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ sii9022_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ tlv320aic3106: tlv320aic3106@1b {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x1b>;
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&vcc3v3_dcin_reg>;
+ IOVDD-supply = <&vcc3v3_dcin_reg>;
+ DRVDD-supply = <&vcc3v3_dcin_reg>;
+ DVDD-supply = <&vcc1v8_ldo2_reg>;
+ };
+};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vout_pins>;
+ status = "okay";
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&sii9022_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&mcasp2 {
+ #sound-dai-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp2_pins>;
+
+ assigned-clocks = <&k2g_clks 0x4c 2>, <&k2g_clks 0x6 1>;
+ assigned-clock-parents = <0>, <&k2g_clks 0x6 2>;
+ assigned-clock-rates = <22579200>, <0>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 6 serializer */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 1 2 0 0 // AXR2: TX, AXR3: rx
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
diff --git a/src/arm/ti/keystone/keystone-k2g-ice.dts b/src/arm/ti/keystone/keystone-k2g-ice.dts
new file mode 100644
index 0000000..6ceb0d5
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-k2g-ice.dts
@@ -0,0 +1,447 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for K2G Industrial Communication Engine EVM
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "keystone-k2g.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+ compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone";
+ model = "Texas Instruments K2G Industrial Communication EVM";
+
+ memory@800000000 {
+ device_type = "memory";
+ reg = <0x00000008 0x00000000 0x00000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dsp_common_memory: dsp-common-memory@81f800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
+ vmain: fixedregulator-vmain {
+ compatible = "regulator-fixed";
+ regulator-name = "vmain_fixed";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ regulator-always-on;
+ };
+
+ v5_0: fixedregulator-v5_0 {
+ /* TPS54531 */
+ compatible = "regulator-fixed";
+ regulator-name = "v5_0_fixed";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vmain>;
+ regulator-always-on;
+ };
+
+ vdd_3v3: fixedregulator-vdd_3v3 {
+ /* TLV62084 */
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&v5_0>;
+ regulator-always-on;
+ };
+
+ vdd_1v8: fixedregulator-vdd_1v8 {
+ /* TLV62084 */
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v8_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&v5_0>;
+ regulator-always-on;
+ };
+
+ vdds_ddr: fixedregulator-vdds_ddr {
+ /* TLV62080 */
+ compatible = "regulator-fixed";
+ regulator-name = "vdds_ddr_fixed";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ vin-supply = <&v5_0>;
+ regulator-always-on;
+ };
+
+ vref_ddr: fixedregulator-vref_ddr {
+ /* LP2996A */
+ compatible = "regulator-fixed";
+ regulator-name = "vref_ddr_fixed";
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <675000>;
+ vin-supply = <&vdd_3v3>;
+ regulator-always-on;
+ };
+
+ vtt_ddr: fixedregulator-vtt_ddr {
+ /* LP2996A */
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_ddr_fixed";
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <675000>;
+ vin-supply = <&vdd_3v3>;
+ regulator-always-on;
+ };
+
+ vdd_0v9: fixedregulator-vdd_0v9 {
+ /* TPS62180 */
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_0v9_fixed";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&v5_0>;
+ regulator-always-on;
+ };
+
+ vddb: fixedregulator-vddb {
+ /* TPS22945 */
+ compatible = "regulator-fixed";
+ regulator-name = "vddb_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio1 53 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ gpio-decoder {
+ compatible = "gpio-decoder";
+ gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
+ <&pca9536 2 GPIO_ACTIVE_HIGH>,
+ <&pca9536 1 GPIO_ACTIVE_HIGH>,
+ <&pca9536 0 GPIO_ACTIVE_HIGH>;
+ linux,axis = <0>; /* ABS_X */
+ decoder-max-value = <9>;
+ };
+
+ leds1 {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds>;
+
+ led0 {
+ label = "status0:red:cpu0";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "cpu0";
+ };
+
+ led1 {
+ label = "status0:green:usr";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "status0:yellow:usr";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "status1:red:mmc0";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc0";
+ };
+
+ led4 {
+ label = "status1:green:usr";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led5 {
+ label = "status1:yellow:usr";
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led6 {
+ label = "status2:red:usr";
+ gpios = <&gpio0 44 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led7 {
+ label = "status2:green:usr";
+ gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led8 {
+ label = "status2:yellow:usr";
+ gpios = <&gpio0 42 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led9 {
+ label = "status3:red:usr";
+ gpios = <&gpio0 41 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led10 {
+ label = "status3:green:usr";
+ gpios = <&gpio0 101 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led11 {
+ label = "status3:yellow:usr";
+ gpios = <&gpio0 102 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led12 {
+ label = "status4:green:heartbeat";
+ gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&k2g_pinctrl {
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ qspi_pins: qspi-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */
+ K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */
+ K2G_CORE_IOPAD(0x120c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d0.qspi_d0 */
+ K2G_CORE_IOPAD(0x1210) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d1.qspi_d1 */
+ K2G_CORE_IOPAD(0x1214) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d2.qspi_d2 */
+ K2G_CORE_IOPAD(0x1218) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d3.qspi_d3 */
+ K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x10fc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
+ K2G_CORE_IOPAD(0x1100) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
+ K2G_CORE_IOPAD(0x1104) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
+ K2G_CORE_IOPAD(0x1108) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
+ K2G_CORE_IOPAD(0x110c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_clk.mmc1_clk */
+ K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
+ K2G_CORE_IOPAD(0x1114) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* mmc1_sdcd.gpio0_69 */
+ K2G_CORE_IOPAD(0x1118) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_sdwp.mmc1_sdwp */
+ K2G_CORE_IOPAD(0x111c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_pow.mmc1_pow */
+ >;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
+
+ user_leds: user-leds-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x102c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad11.gpio0_11 */
+ K2G_CORE_IOPAD(0x1030) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad12.gpio0_12 */
+ K2G_CORE_IOPAD(0x1034) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad13.gpio0_13 */
+ K2G_CORE_IOPAD(0x1038) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad14.gpio0_14 */
+ K2G_CORE_IOPAD(0x103c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad15.gpio0_15 */
+ K2G_CORE_IOPAD(0x1040) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_clk.gpio0_16 */
+ K2G_CORE_IOPAD(0x104c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_wen.gpio0_19 */
+ K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data9.gpio0_44 */
+ K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data10.gpio0_43 */
+ K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data11.gpio0_42 */
+ K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data12.gpio0_41 */
+ K2G_CORE_IOPAD(0x11b8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* spi2_scsn0.gpio0_101 */
+ K2G_CORE_IOPAD(0x11bc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* spi2_scsn1.gpio0_102 */
+ >;
+ };
+
+ emac_pins: emac-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x113c) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD1.RGMII_RXD1 */
+ K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD2.RGMII_RXD2 */
+ K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD3.RGMII_RXD3 */
+ K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD0.RGMII_RXD0 */
+ K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD0.RGMII_TXD0 */
+ K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD1.RGMII_TXD1 */
+ K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD2.RGMII_TXD2 */
+ K2G_CORE_IOPAD(0x116c) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD3.RGMII_TXD3 */
+ K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXCLK.RGMII_TXC */
+ K2G_CORE_IOPAD(0x117c) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXEN.RGMII_TXCTL */
+ K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXCLK.RGMII_RXC */
+ K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXDV.RGMII_RXCTL */
+ >;
+ };
+
+ mdio_pins: mdio-pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x118c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_CLK.MDIO_CLK */
+ K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_DATA.MDIO_DATA */
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&dsp0 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_pins>;
+ cdns,rclk-en;
+ status = "okay";
+
+ flash0: flash@0 {
+ compatible = "s25fl256s1", "jedec,spi-nor";
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <96000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cdns,read-delay = <5>;
+ cdns,tshsl-ns = <500>;
+ cdns,tsd2d-ns = <500>;
+ cdns,tchsh-ns = <119>;
+ cdns,tslch-ns = <119>;
+
+ partition@0 {
+ label = "QSPI.u-boot";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@1 {
+ label = "QSPI.u-boot-env";
+ reg = <0x00100000 0x00040000>;
+ };
+ partition@2 {
+ label = "QSPI.skern";
+ reg = <0x00140000 0x0040000>;
+ };
+ partition@3 {
+ label = "QSPI.pmmc-firmware";
+ reg = <0x00180000 0x0040000>;
+ };
+ partition@4 {
+ label = "QSPI.kernel";
+ reg = <0x001c0000 0x0800000>;
+ };
+ partition@5 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x009c0000 0x0040000>;
+ };
+ partition@6 {
+ label = "QSPI.file-system";
+ reg = <0x00a00000 0x1600000>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vdd_3v3>;
+ cd-gpios = <&gpio0 69 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pca9536: gpio@41 {
+ compatible = "ti,pca9536";
+ reg = <0x41>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <&vdd_3v3>;
+ };
+};
+
+&qmss {
+ status = "okay";
+};
+
+&knav_dmas {
+ status = "okay";
+};
+
+&netcp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins>;
+ status = "okay";
+};
+
+&mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+ status = "okay";
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ ti,min-output-impedance;
+ ti,dp83867-rxctrl-strap-quirk;
+ };
+};
+
+&gbe0 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
diff --git a/src/arm/ti/keystone/keystone-k2g-netcp.dtsi b/src/arm/ti/keystone/keystone-k2g-netcp.dtsi
new file mode 100644
index 0000000..f630693
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-k2g-netcp.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for K2G Netcp driver
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+qmss: qmss@4020000 {
+ compatible = "ti,66ak2g-navss-qm";
+ dma-coherent;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k2g_pds 0x0018>;
+ clocks = <&k2g_clks 0x0018 0>;
+ clock-names = "nss_vclk";
+ ranges;
+ queue-range = <0 0x80>;
+ linkram0 = <0x4020000 0x7ff>;
+ status = "disabled";
+
+ qmgrs {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ qmgr0 {
+ managed-queues = <0 0x80>;
+ reg = <0x4100000 0x800>,
+ <0x4040000 0x100>,
+ <0x4080000 0x800>,
+ <0x40c0000 0x800>;
+ reg-names = "peek", "config",
+ "region", "push";
+ };
+
+ };
+ queue-pools {
+ qpend {
+ qpend-0 {
+ qrange = <77 8>;
+ interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04
+ 0 311 0xf04 0 312 0xf04 0 313 0xf04
+ 0 314 0xf04 0 315 0xf04>;
+ qalloc-by-id;
+ };
+ };
+ general-purpose {
+ gp-0 {
+ qrange = <112 8>;
+ };
+ netcp-tx {
+ qrange = <5 8>;
+ qalloc-by-id;
+ };
+ };
+ };
+
+ descriptor-regions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ region-12 {
+ id = <12>;
+ region-spec = <1023 128>; /* num_desc desc_size */
+ link-index = <0x400>;
+ };
+ };
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+ compatible = "ti,keystone-navigator-dma";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ power-domains = <&k2g_pds 0x0018>;
+ clocks = <&k2g_clks 0x0018 0>;
+ clock-names = "nss_vclk";
+ ranges;
+ ti,navigator-cloud-address = <0x40c0000 0x40c0000 0x40c0000 0x40c0000>;
+
+ dma_gbe: dma_gbe@0 {
+ reg = <0x4010000 0x100>,
+ <0x4011000 0x2a0>, /* 21 Tx channels */
+ <0x4012000 0x400>, /* 32 Rx channels */
+ <0x4010100 0x80>,
+ <0x4013000 0x400>; /* 32 Rx flows */
+ reg-names = "global", "txchan", "rxchan",
+ "txsched", "rxflow";
+ };
+
+};
+
+netcp: netcp@4000000 {
+ reg = <0x2620110 0x8>;
+ reg-names = "efuse";
+ compatible = "ti,netcp-1.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ power-domains = <&k2g_pds 0x0018>;
+ clocks = <&k2g_clks 0x0018 3>, <&k2g_clks 0x0018 8>;
+ clock-names = "ethss_clk", "cpts";
+
+ /* NetCP address range */
+ ranges = <0 0x4000000 0x1000000>;
+
+ dma-coherent;
+
+ ti,navigator-dmas = <&dma_gbe 0>, <&dma_gbe 5>;
+ ti,navigator-dma-names = "netrx0", "nettx";
+
+ netcp-devices {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ gbe: gbe@200000 {
+ label = "netcp-gbe";
+ compatible = "ti,netcp-gbe-2";
+ reg = <0x200000 0x20>, <0x220000 0x20000>;
+ enable-ale;
+ tx-queue = <5>;
+ tx-channel = "nettx";
+ cpts-rftclk-sel = <0>;
+ cpts-ext-ts-inputs = <8>;
+
+ interfaces {
+ gbe0: interface-0 {
+ slave-port = <0>;
+ link-interface = <5>;
+ };
+ };
+ };
+ };
+
+ netcp-interfaces {
+ interface-0 {
+ rx-channel = "netrx0";
+ rx-pool = <512 12>;
+ tx-pool = <511 12>;
+ rx-queue-depth = <128 128 0 0>;
+ rx-buffer-size = <1518 4096 0 0>;
+ rx-queue = <77>;
+ tx-completion-queue = <78>;
+ efuse-mac = <1>;
+ netcp-gbe = <&gbe0>;
+ };
+ };
+};
diff --git a/src/arm/ti/keystone/keystone-k2g.dtsi b/src/arm/ti/keystone/keystone-k2g.dtsi
new file mode 100644
index 0000000..102d596
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-k2g.dtsi
@@ -0,0 +1,644 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for K2G SOC
+ *
+ * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/keystone.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "ti,k2g","ti,keystone";
+ model = "Texas Instruments K2G SoC";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ rproc0 = &dsp0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ gic: interrupt-controller@2561000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x02561000 0x0 0x1000>,
+ <0x0 0x02562000 0x0 0x2000>,
+ <0x0 0x02564000 0x0 0x2000>,
+ <0x0 0x02566000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts =
+ <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ usbphy {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "simple-bus";
+
+ usb0_phy: usb-phy@0 {
+ compatible = "usb-nop-xceiv";
+ reg = <0>;
+ status = "disabled";
+ };
+
+ usb1_phy: usb-phy@1 {
+ compatible = "usb-nop-xceiv";
+ reg = <1>;
+ status = "disabled";
+ };
+ };
+
+ soc0: soc@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #pinctrl-cells = <1>;
+ compatible = "ti,keystone","simple-bus";
+ ranges = <0x0 0x0 0x0 0xc0000000>;
+ dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
+
+ msm_ram: sram@c000000 {
+ compatible = "mmio-sram";
+ reg = <0x0c000000 0x100000>;
+ ranges = <0x0 0x0c000000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bm-sram@f7000 {
+ reg = <0x000f7000 0x8000>;
+ };
+ };
+
+ k2g_pinctrl: pinmux@2621000 {
+ compatible = "pinctrl-single";
+ reg = <0x02621000 0x410>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x001b0007>;
+ };
+
+ devctrl: device-state-control@2620000 {
+ compatible = "ti,keystone-devctrl", "syscon", "simple-mfd";
+ reg = <0x02620000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x02620000 0x1000>;
+
+ kirq0: keystone_irq@2a0 {
+ compatible = "ti,keystone-irq";
+ reg = <0x2a0 0x10>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ti,syscon-dev = <&devctrl 0x2a0>;
+ };
+
+ dspgpio0: keystone_dsp_gpio@240 {
+ compatible = "ti,keystone-dsp-gpio";
+ reg = <0x240 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x240>;
+ };
+ };
+
+ uart0: serial@2530c00 {
+ compatible = "ti,da830-uart", "ns16550a";
+ current-speed = <115200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ reg = <0x02530c00 0x100>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&k2g_clks 0x2c 0>;
+ power-domains = <&k2g_pds 0x2c>;
+ status = "disabled";
+ };
+
+ uart1: serial@2531000 {
+ compatible = "ti,da830-uart", "ns16550a";
+ current-speed = <115200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ reg = <0x02531000 0x100>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&k2g_clks 0x2d 0>;
+ power-domains = <&k2g_pds 0x2d>;
+ status = "disabled";
+ };
+
+ uart2: serial@2531400 {
+ compatible = "ti,da830-uart", "ns16550a";
+ current-speed = <115200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ reg = <0x02531400 0x100>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&k2g_clks 0x2e 0>;
+ power-domains = <&k2g_pds 0x2e>;
+ status = "disabled";
+ };
+
+ dcan0: can@260b200 {
+ compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+ reg = <0x0260b200 0x200>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ power-domains = <&k2g_pds 0x0008>;
+ clocks = <&k2g_clks 0x0008 1>;
+ };
+
+ dcan1: can@260b400 {
+ compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+ reg = <0x0260b400 0x200>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ power-domains = <&k2g_pds 0x0009>;
+ clocks = <&k2g_clks 0x0009 1>;
+ };
+
+ i2c0: i2c@2530000 {
+ compatible = "ti,keystone-i2c";
+ reg = <0x02530000 0x400>;
+ clocks = <&k2g_clks 0x003a 0>;
+ power-domains = <&k2g_pds 0x003a>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@2530400 {
+ compatible = "ti,keystone-i2c";
+ reg = <0x02530400 0x400>;
+ clocks = <&k2g_clks 0x003b 0>;
+ power-domains = <&k2g_pds 0x003b>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@2530800 {
+ compatible = "ti,keystone-i2c";
+ reg = <0x02530800 0x400>;
+ clocks = <&k2g_clks 0x003c 0>;
+ power-domains = <&k2g_pds 0x003c>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ dsp0: dsp@10800000 {
+ compatible = "ti,k2g-dsp";
+ reg = <0x10800000 0x00100000>,
+ <0x10e00000 0x00008000>,
+ <0x10f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ power-domains = <&k2g_pds 0x0046>;
+ ti,syscon-dev = <&devctrl 0x844>;
+ resets = <&k2g_reset 0x0046 0x1>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <0 8>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio0 27 0>;
+ status = "disabled";
+ };
+
+ msgmgr: mailbox@2a00000 {
+ compatible = "ti,k2g-message-manager";
+ #mbox-cells = <2>;
+ reg-names = "queue_proxy_region",
+ "queue_state_debug_region";
+ reg = <0x02a00000 0x400000>, <0x028c3400 0x400>;
+ interrupt-names = "rx_005",
+ "rx_057";
+ interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pmmc: system-controller@2921c00 {
+ compatible = "ti,k2g-sci";
+ /*
+ * In case of rare platforms that does not use k2g as
+ * system master, use /delete-property/
+ */
+ ti,system-reboot-controller;
+ mbox-names = "rx", "tx";
+ mboxes = <&msgmgr 5 2>,
+ <&msgmgr 0 0>;
+ reg-names = "debug_messages";
+ reg = <0x02921c00 0x400>;
+
+ k2g_pds: power-controller {
+ compatible = "ti,sci-pm-domain";
+ #power-domain-cells = <1>;
+ };
+
+ k2g_clks: clock-controller {
+ compatible = "ti,k2g-sci-clk";
+ #clock-cells = <2>;
+ };
+
+ k2g_reset: reset-controller {
+ compatible = "ti,sci-reset";
+ #reset-cells = <2>;
+ };
+ };
+
+ gpio0: gpio@2603000 {
+ compatible = "ti,k2g-gpio", "ti,keystone-gpio";
+ reg = <0x02603000 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <144>;
+ ti,davinci-gpio-unbanked = <0>;
+ clocks = <&k2g_clks 0x001b 0x0>;
+ clock-names = "gpio";
+ };
+
+ gpio1: gpio@260a000 {
+ compatible = "ti,k2g-gpio", "ti,keystone-gpio";
+ reg = <0x0260a000 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 443 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 444 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 445 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 446 IRQ_TYPE_EDGE_RISING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <68>;
+ ti,davinci-gpio-unbanked = <0>;
+ clocks = <&k2g_clks 0x001c 0x0>;
+ clock-names = "gpio";
+ };
+
+ dss: dss@02540000 {
+ compatible = "ti,k2g-dss";
+ reg = <0x02540000 0x400>,
+ <0x02550000 0x1000>,
+ <0x02557000 0x1000>,
+ <0x0255a800 0x100>,
+ <0x0255ac00 0x100>;
+ reg-names = "cfg", "common", "vid1", "ovr1", "vp1";
+ clocks = <&k2g_clks 0x2 0>,
+ <&k2g_clks 0x2 1>;
+ clock-names = "fck", "vp1";
+ interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>;
+
+ power-domains = <&k2g_pds 0x2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ max-memory-bandwidth = <230000000>;
+ };
+
+ edma0: edma@2700000 {
+ compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
+ reg = <0x02700000 0x8000>;
+ reg-names = "edma3_cc";
+ interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "edma3_ccint", "emda3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
+
+ ti,edma-memcpy-channels = <32 33 34 35>;
+
+ power-domains = <&k2g_pds 0x3f>;
+ };
+
+ edma0_tptc0: tptc@2760000 {
+ compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+ reg = <0x02760000 0x400>;
+ power-domains = <&k2g_pds 0x3f>;
+ };
+
+ edma0_tptc1: tptc@2768000 {
+ compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+ reg = <0x02768000 0x400>;
+ power-domains = <&k2g_pds 0x3f>;
+ };
+
+ edma1: edma@2728000 {
+ compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
+ reg = <0x02728000 0x8000>;
+ reg-names = "edma3_cc";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 220 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "edma3_ccint", "emda3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>;
+
+ /*
+ * memcpy is disabled, can be enabled with:
+ * ti,edma-memcpy-channels = <12 13 14 15>;
+ * for example.
+ */
+
+ power-domains = <&k2g_pds 0x4f>;
+ };
+
+ edma1_tptc0: tptc@27b0000 {
+ compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+ reg = <0x027b0000 0x400>;
+ power-domains = <&k2g_pds 0x4f>;
+ };
+
+ edma1_tptc1: tptc@27b8000 {
+ compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+ reg = <0x027b8000 0x400>;
+ power-domains = <&k2g_pds 0x4f>;
+ };
+
+ mmc0: mmc@23000000 {
+ compatible = "ti,k2g-sdhci";
+ reg = <0x23000000 0x400>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
+ bus-width = <4>;
+ no-1-8-v;
+ max-frequency = <96000000>;
+ power-domains = <&k2g_pds 0xb>;
+ clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
+ clock-names = "fck", "mmchsdb_fck";
+ status = "disabled";
+ };
+
+ mmc1: mmc@23100000 {
+ compatible = "ti,k2g-sdhci";
+ reg = <0x23100000 0x400>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ max-frequency = <96000000>;
+ power-domains = <&k2g_pds 0xc>;
+ clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>;
+ clock-names = "fck", "mmchsdb_fck";
+ };
+
+ qspi: spi@2940000 {
+ compatible = "ti,k2g-qspi", "cdns,qspi-nor";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x02940000 0x1000>,
+ <0x24000000 0x4000000>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x24000000>;
+ clocks = <&k2g_clks 0x43 0x0>;
+ power-domains = <&k2g_pds 0x43>;
+ status = "disabled";
+ };
+
+ mcasp0: mcasp@2340000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x02340000 0x2000>,
+ <0x21804000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma0 24 1>, <&edma0 25 1>;
+ dma-names = "tx", "rx";
+ power-domains = <&k2g_pds 0x4>;
+ clocks = <&k2g_clks 0x4 0>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ mcasp1: mcasp@2342000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x02342000 0x2000>,
+ <0x21804400 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma1 48 1>, <&edma1 49 1>;
+ dma-names = "tx", "rx";
+ power-domains = <&k2g_pds 0x5>;
+ clocks = <&k2g_clks 0x5 0>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ mcasp2: mcasp@2344000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x02344000 0x2000>,
+ <0x21804800 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma1 50 1>, <&edma1 51 1>;
+ dma-names = "tx", "rx";
+ power-domains = <&k2g_pds 0x6>;
+ clocks = <&k2g_clks 0x6 0>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ keystone_usb0: keystone-dwc3@2680000 {
+ compatible = "ti,keystone-dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2680000 0x10000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
+ ranges;
+ dma-coherent;
+ dma-ranges;
+ status = "disabled";
+ power-domains = <&k2g_pds 0x0016>;
+
+ usb0: usb@2690000 {
+ compatible = "snps,dwc3";
+ reg = <0x2690000 0x10000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ usb-phy = <&usb0_phy>;
+ status = "disabled";
+ };
+ };
+
+ keystone_usb1: keystone-dwc3@2580000 {
+ compatible = "ti,keystone-dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2580000 0x10000>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+ ranges;
+ dma-coherent;
+ dma-ranges;
+ status = "disabled";
+ power-domains = <&k2g_pds 0x0017>;
+
+ usb1: usb@2590000 {
+ compatible = "snps,dwc3";
+ reg = <0x2590000 0x10000>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ usb-phy = <&usb1_phy>;
+ status = "disabled";
+ };
+ };
+
+ ecap0: pwm@21d1800 {
+ compatible = "ti,k2g-ecap", "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x021d1800 0x60>;
+ power-domains = <&k2g_pds 0x38>;
+ clocks = <&k2g_clks 0x38 0>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ ecap1: pwm@21d1c00 {
+ compatible = "ti,k2g-ecap", "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x021d1c00 0x60>;
+ power-domains = <&k2g_pds 0x39>;
+ clocks = <&k2g_clks 0x39 0x0>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ spi0: spi@21805400 {
+ compatible = "ti,keystone-spi";
+ reg = <0x21805400 0x200>;
+ num-cs = <4>;
+ ti,davinci-spi-intr-line = <0>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k2g_pds 0x0010>;
+ clocks = <&k2g_clks 0x0010 0>;
+ };
+
+ spi1: spi@21805800 {
+ compatible = "ti,keystone-spi";
+ reg = <0x21805800 0x200>;
+ num-cs = <4>;
+ ti,davinci-spi-intr-line = <0>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k2g_pds 0x0011>;
+ clocks = <&k2g_clks 0x0011 0>;
+ };
+
+ spi2: spi@21805c00 {
+ compatible = "ti,keystone-spi";
+ reg = <0x21805c00 0x200>;
+ num-cs = <4>;
+ ti,davinci-spi-intr-line = <0>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k2g_pds 0x0012>;
+ clocks = <&k2g_clks 0x0012 0>;
+ };
+
+ spi3: spi@21806000 {
+ compatible = "ti,keystone-spi";
+ reg = <0x21806000 0x200>;
+ num-cs = <4>;
+ ti,davinci-spi-intr-line = <0>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k2g_pds 0x0013>;
+ clocks = <&k2g_clks 0x0013 0>;
+ };
+
+ wdt: wdt@02250000 {
+ compatible = "ti,keystone-wdt", "ti,davinci-wdt";
+ reg = <0x02250000 0x80>;
+ power-domains = <&k2g_pds 0x22>;
+ clocks = <&k2g_clks 0x22 0>;
+ };
+
+ emif: emif@21010000 {
+ compatible = "ti,emif-keystone";
+ reg = <0x21010000 0x200>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ mdio: mdio@4200f00 {
+ compatible = "ti,keystone_mdio", "ti,davinci_mdio";
+ reg = <0x04200f00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k2g_clks 0x0018 3>;
+ clock-names = "fck";
+ power-domains = <&k2g_pds 0x0018>;
+ status = "disabled";
+ bus_freq = <2500000>;
+ };
+ #include "keystone-k2g-netcp.dtsi"
+ };
+};
diff --git a/src/arm/ti/keystone/keystone-k2hk-clocks.dtsi b/src/arm/ti/keystone/keystone-k2hk-clocks.dtsi
new file mode 100644
index 0000000..4ba6912
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-k2hk-clocks.dtsi
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 Kepler/Hawking SoC clock nodes
+ *
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+clocks {
+ armpllclk: armpllclk@2620370 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclkarm>;
+ clock-output-names = "arm-pll-clk";
+ reg = <0x02620370 4>;
+ reg-names = "control";
+ };
+
+ mainpllclk: mainpllclk@2310110 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,main-pll-clock";
+ clocks = <&refclksys>;
+ reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+ reg-names = "control", "multiplier", "post-divider";
+ };
+
+ papllclk: papllclk@2620358 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclkpass>;
+ clock-output-names = "papllclk";
+ reg = <0x02620358 4>;
+ reg-names = "control";
+ };
+
+ ddr3apllclk: ddr3apllclk@2620360 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclkddr3a>;
+ clock-output-names = "ddr-3a-pll-clk";
+ reg = <0x02620360 4>;
+ reg-names = "control";
+ };
+
+ ddr3bpllclk: ddr3bpllclk@2620368 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclkddr3b>;
+ clock-output-names = "ddr-3b-pll-clk";
+ reg = <0x02620368 4>;
+ reg-names = "control";
+ };
+
+ clktsip: clktsip@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk16>;
+ clock-output-names = "tsip";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clksrio: clksrio@235002c {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1rstiso13>;
+ clock-output-names = "srio";
+ reg = <0x0235002c 0xb00>, <0x02350010 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <4>;
+ };
+
+ clkhyperlink0: clkhyperlink0@2350030 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk12>;
+ clock-output-names = "hyperlink-0";
+ reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <5>;
+ };
+
+ clkgem1: clkgem1@2350040 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem1";
+ reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <9>;
+ };
+
+ clkgem2: clkgem2@2350044 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem2";
+ reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <10>;
+ };
+
+ clkgem3: clkgem3@2350048 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem3";
+ reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <11>;
+ };
+
+ clkgem4: clkgem4@235004c {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem4";
+ reg = <0x0235004c 0xb00>, <0x02350030 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <12>;
+ };
+
+ clkgem5: clkgem5@2350050 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem5";
+ reg = <0x02350050 0xb00>, <0x02350034 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <13>;
+ };
+
+ clkgem6: clkgem6@2350054 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem6";
+ reg = <0x02350054 0xb00>, <0x02350038 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <14>;
+ };
+
+ clkgem7: clkgem7@2350058 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem7";
+ reg = <0x02350058 0xb00>, <0x0235003c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <15>;
+ };
+
+ clkddr31: clkddr31@2350060 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "ddr3-1";
+ reg = <0x02350060 0xb00>, <0x02350040 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <16>;
+ };
+
+ clktac: clktac@2350064 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tac";
+ reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <17>;
+ };
+
+ clkrac01: clkrac01@2350068 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "rac-01";
+ reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <17>;
+ };
+
+ clkrac23: clkrac23@235006c {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "rac-23";
+ reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <18>;
+ };
+
+ clkfftc0: clkfftc0@2350070 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "fftc-0";
+ reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <19>;
+ };
+
+ clkfftc1: clkfftc1@2350074 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "fftc-1";
+ reg = <0x02350074 0xb00>, <0x0235004c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <19>;
+ };
+
+ clkfftc2: clkfftc2@2350078 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "fftc-2";
+ reg = <0x02350078 0xb00>, <0x02350050 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <20>;
+ };
+
+ clkfftc3: clkfftc3@235007c {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "fftc-3";
+ reg = <0x0235007c 0xb00>, <0x02350050 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <20>;
+ };
+
+ clkfftc4: clkfftc4@2350080 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "fftc-4";
+ reg = <0x02350080 0xb00>, <0x02350050 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <20>;
+ };
+
+ clkfftc5: clkfftc5@2350084 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "fftc-5";
+ reg = <0x02350084 0xb00>, <0x02350050 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <20>;
+ };
+
+ clkaif: clkaif@2350088 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "aif";
+ reg = <0x02350088 0xb00>, <0x02350054 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <21>;
+ };
+
+ clktcp3d0: clktcp3d0@235008c {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tcp3d-0";
+ reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <22>;
+ };
+
+ clktcp3d1: clktcp3d1@2350090 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tcp3d-1";
+ reg = <0x02350090 0xb00>, <0x02350058 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <22>;
+ };
+
+ clktcp3d2: clktcp3d2@2350094 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tcp3d-2";
+ reg = <0x02350094 0xb00>, <0x0235005c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <23>;
+ };
+
+ clktcp3d3: clktcp3d3@2350098 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tcp3d-3";
+ reg = <0x02350098 0xb00>, <0x0235005c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <23>;
+ };
+
+ clkvcp0: clkvcp0@235009c {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-0";
+ reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <24>;
+ };
+
+ clkvcp1: clkvcp1@23500a0 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-1";
+ reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <24>;
+ };
+
+ clkvcp2: clkvcp2@23500a4 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-2";
+ reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <24>;
+ };
+
+ clkvcp3: clkvcp3@23500a8 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-3";
+ reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <24>;
+ };
+
+ clkvcp4: clkvcp4@23500ac {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-4";
+ reg = <0x023500ac 0xb00>, <0x02350064 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <25>;
+ };
+
+ clkvcp5: clkvcp5@23500b0 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-5";
+ reg = <0x023500b0 0xb00>, <0x02350064 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <25>;
+ };
+
+ clkvcp6: clkvcp6@23500b4 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-6";
+ reg = <0x023500b4 0xb00>, <0x02350064 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <25>;
+ };
+
+ clkvcp7: clkvcp7@23500b8 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-7";
+ reg = <0x023500b8 0xb00>, <0x02350064 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <25>;
+ };
+
+ clkbcp: clkbcp@23500bc {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "bcp";
+ reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <26>;
+ };
+
+ clkdxb: clkdxb@23500c0 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "dxb";
+ reg = <0x023500c0 0xb00>, <0x0235006c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <27>;
+ };
+
+ clkhyperlink1: clkhyperlink1@23500c4 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk12>;
+ clock-output-names = "hyperlink-1";
+ reg = <0x023500c4 0xb00>, <0x02350070 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <28>;
+ };
+
+ clkxge: clkxge@23500c8 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "xge";
+ reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <29>;
+ };
+};
diff --git a/src/arm/ti/keystone/keystone-k2hk-evm.dts b/src/arm/ti/keystone/keystone-k2hk-evm.dts
new file mode 100644
index 0000000..206df8a
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-k2hk-evm.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 Kepler/Hawking EVM device tree
+ *
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "keystone-k2hk.dtsi"
+
+/ {
+ compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
+ model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dsp_common_memory: dsp-common-memory@81f800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-debug-1-1 {
+ label = "keystone:green:debug1";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
+ };
+
+ led-debug-1-2 {
+ label = "keystone:red:debug1";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
+ };
+
+ led-debug-2 {
+ label = "keystone:blue:debug2";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
+ };
+
+ led-debug-3 {
+ label = "keystone:blue:debug3";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
+ };
+ };
+};
+
+&soc0 {
+ clocks {
+ refclksys: refclksys {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <122880000>;
+ clock-output-names = "refclk-sys";
+ };
+
+ refclkpass: refclkpass {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <122880000>;
+ clock-output-names = "refclk-pass";
+ };
+
+ refclkarm: refclkarm {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "refclk-arm";
+ };
+
+ refclkddr3a: refclkddr3a {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk-ddr3a";
+ };
+
+ refclkddr3b: refclkddr3b {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk-ddr3b";
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&keystone_usb0 {
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "host";
+};
+
+&aemif {
+ cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-ranges;
+ ranges;
+
+ ti,cs-chipselect = <0>;
+ /* all timings in nanoseconds */
+ ti,cs-min-turnaround-ns = <12>;
+ ti,cs-read-hold-ns = <6>;
+ ti,cs-read-strobe-ns = <23>;
+ ti,cs-read-setup-ns = <9>;
+ ti,cs-write-hold-ns = <8>;
+ ti,cs-write-strobe-ns = <23>;
+ ti,cs-write-setup-ns = <8>;
+
+ nand@0,0 {
+ compatible = "ti,keystone-nand","ti,davinci-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0 0x4000000
+ 1 0 0x0000100>;
+
+ ti,davinci-chipselect = <0>;
+ ti,davinci-mask-ale = <0x2000>;
+ ti,davinci-mask-cle = <0x4000>;
+ ti,davinci-mask-chipsel = <0>;
+ nand-ecc-mode = "hw";
+ ti,davinci-ecc-bits = <4>;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "params";
+ reg = <0x100000 0x80000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "ubifs";
+ reg = <0x180000 0x1fe80000>;
+ };
+ };
+ };
+};
+
+&i2c0 {
+ eeprom@50 {
+ compatible = "atmel,24c1024";
+ reg = <0x50>;
+ };
+};
+
+&spi0 {
+ nor_flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
+ spi-max-frequency = <54000000>;
+ m25p,fast-read;
+ reg = <0>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "misc";
+ reg = <0x80000 0xf80000>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+ ethphy0: ethernet-phy@0 {
+ compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&dsp0 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp1 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp2 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp3 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp4 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp5 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp6 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp7 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
diff --git a/src/arm/ti/keystone/keystone-k2hk-netcp.dtsi b/src/arm/ti/keystone/keystone-k2hk-netcp.dtsi
new file mode 100644
index 0000000..8a421c6
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-k2hk-netcp.dtsi
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Keystone 2 Hawking Netcp driver
+ *
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+qmss: qmss@2a40000 {
+ compatible = "ti,keystone-navigator-qmss";
+ dma-coherent;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&chipclk13>;
+ ranges;
+ queue-range = <0 0x4000>;
+ linkram0 = <0x100000 0x8000>;
+ linkram1 = <0x0 0x10000>;
+
+ qmgrs {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ qmgr0 {
+ managed-queues = <0 0x2000>;
+ reg = <0x2a40000 0x20000>,
+ <0x2a06000 0x400>,
+ <0x2a02000 0x1000>,
+ <0x2a03000 0x1000>,
+ <0x23a80000 0x20000>,
+ <0x2a80000 0x20000>;
+ reg-names = "peek", "status", "config",
+ "region", "push", "pop";
+ };
+
+ qmgr1 {
+ managed-queues = <0x2000 0x2000>;
+ reg = <0x2a60000 0x20000>,
+ <0x2a06400 0x400>,
+ <0x2a04000 0x1000>,
+ <0x2a05000 0x1000>,
+ <0x23aa0000 0x20000>,
+ <0x2aa0000 0x20000>;
+ reg-names = "peek", "status", "config",
+ "region", "push", "pop";
+ };
+ };
+
+ queue-pools {
+ qpend {
+ qpend-0 {
+ qrange = <658 8>;
+ interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+ 0 43 0xf04 0 44 0xf04 0 45 0xf04
+ 0 46 0xf04 0 47 0xf04>;
+ };
+ qpend-1 {
+ qrange = <8704 16>;
+ interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+ 0 51 0xf04 0 52 0xf04 0 53 0xf04
+ 0 54 0xf04 0 55 0xf04 0 56 0xf04
+ 0 57 0xf04 0 58 0xf04 0 59 0xf04
+ 0 60 0xf04 0 61 0xf04 0 62 0xf04
+ 0 63 0xf04>;
+ qalloc-by-id;
+ };
+ qpend-2 {
+ qrange = <8720 16>;
+ interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+ 0 59 0xf04 0 68 0xf04 0 69 0xf04
+ 0 70 0xf04 0 71 0xf04 0 72 0xf04
+ 0 73 0xf04 0 74 0xf04 0 75 0xf04
+ 0 76 0xf04 0 77 0xf04 0 78 0xf04
+ 0 79 0xf04>;
+ };
+ };
+ general-purpose {
+ gp-0 {
+ qrange = <4000 64>;
+ };
+ netcp-tx {
+ qrange = <640 9>;
+ qalloc-by-id;
+ };
+ netcpx-tx {
+ qrange = <8752 8>;
+ qalloc-by-id;
+ };
+ };
+ accumulator {
+ acc-low-0 {
+ qrange = <480 32>;
+ accumulator = <0 47 16 2 50>;
+ interrupts = <0 226 0xf01>;
+ multi-queue;
+ qalloc-by-id;
+ };
+ };
+ };
+
+ descriptor-regions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ region-12 {
+ id = <12>;
+ region-spec = <8192 128>; /* num_desc desc_size */
+ link-index = <0x4000>;
+ };
+ };
+
+ pdsps {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ pdsp0@2a10000 {
+ reg = <0x2a10000 0x1000 /*iram */
+ 0x2a0f000 0x100 /*reg*/
+ 0x2a0c000 0x3c8 /*intd */
+ 0x2a20000 0x4000>; /*cmd*/
+ id = <0>;
+ };
+ };
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+ compatible = "ti,keystone-navigator-dma";
+ clocks = <&papllclk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,navigator-cloud-address = <0x23a80000 0x23a90000
+ 0x23aa0000 0x23ab0000>;
+
+ dma_gbe: dma_gbe@0 {
+ reg = <0x2004000 0x100>,
+ <0x2004400 0x120>,
+ <0x2004800 0x300>,
+ <0x2004c00 0x120>,
+ <0x2005000 0x400>;
+ reg-names = "global", "txchan", "rxchan",
+ "txsched", "rxflow";
+ };
+};
+
+netcp: netcp@2000000 {
+ reg = <0x2620110 0x8>;
+ reg-names = "efuse";
+ compatible = "ti,netcp-1.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* NetCP address range */
+ ranges = <0 0x2000000 0x100000>;
+
+ clocks = <&clkpa>, <&clkcpgmac>;
+ clock-names = "pa_clk", "ethss_clk";
+ dma-coherent;
+
+ ti,navigator-dmas = <&dma_gbe 22>,
+ <&dma_gbe 23>,
+ <&dma_gbe 8>;
+ ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+
+ netcp-devices {
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ gbe@90000 { /* ETHSS */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ label = "netcp-gbe";
+ compatible = "ti,netcp-gbe";
+ reg = <0x90000 0x300>, <0x90400 0x400>, <0x90800 0x700>;
+ /* enable-ale; */
+ tx-queue = <648>;
+ tx-channel = "nettx";
+
+ cpts {
+ clocks = <&cpts_refclk_mux>;
+ clock-names = "cpts";
+
+ cpts_refclk_mux: cpts-refclk-mux {
+ #clock-cells = <0>;
+ clocks = <&chipclk12>, <&chipclk13>,
+ <&timi0>, <&timi1>,
+ <&tsrefclk>;
+ ti,mux-tbl = <0x0>, <0x1>, <0x2>,
+ <0x3>, <0x8>;
+ assigned-clocks = <&cpts_refclk_mux>;
+ assigned-clock-parents = <&chipclk12>;
+ };
+ };
+
+ interfaces {
+ gbe0: interface-0 {
+ slave-port = <0>;
+ link-interface = <1>;
+ phy-handle = <ðphy0>;
+ };
+ gbe1: interface-1 {
+ slave-port = <1>;
+ link-interface = <1>;
+ phy-handle = <ðphy1>;
+ };
+ };
+
+ secondary-slave-ports {
+ port-2 {
+ slave-port = <2>;
+ link-interface = <2>;
+ };
+ port-3 {
+ slave-port = <3>;
+ link-interface = <2>;
+ };
+ };
+ };
+ };
+
+ netcp-interfaces {
+ interface-0 {
+ rx-channel = "netrx0";
+ rx-pool = <1024 12>;
+ tx-pool = <1024 12>;
+ rx-queue-depth = <128 128 0 0>;
+ rx-buffer-size = <1518 4096 0 0>;
+ rx-queue = <8704>;
+ tx-completion-queue = <8706>;
+ efuse-mac = <1>;
+ netcp-gbe = <&gbe0>;
+
+ };
+ interface-1 {
+ rx-channel = "netrx1";
+ rx-pool = <1024 12>;
+ tx-pool = <1024 12>;
+ rx-queue-depth = <128 128 0 0>;
+ rx-buffer-size = <1518 4096 0 0>;
+ rx-queue = <8705>;
+ tx-completion-queue = <8707>;
+ efuse-mac = <0>;
+ local-mac-address = [02 18 31 7e 3e 6f];
+ netcp-gbe = <&gbe1>;
+ };
+ };
+};
+
+sa_subsys: subsys@20c0000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x20c0000 0x40000>;
+
+ sa_config: subsys@0 {
+ compatible = "syscon";
+ reg = <0x0 0x100>;
+ };
+
+ rng@24000 {
+ compatible = "ti,keystone-rng";
+ reg = <0x24000 0x1000>;
+ ti,syscon-sa-cfg = <&sa_config>;
+ clocks = <&clksa>;
+ clock-names = "fck";
+ };
+};
diff --git a/src/arm/ti/keystone/keystone-k2hk.dtsi b/src/arm/ti/keystone/keystone-k2hk.dtsi
new file mode 100644
index 0000000..da6d393
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-k2hk.dtsi
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 Kepler/Hawking soc specific device tree
+ *
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/reset/ti-syscon.h>
+
+/ {
+ compatible = "ti,k2hk", "ti,keystone";
+ model = "Texas Instruments Keystone 2 Kepler/Hawking SoC";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&gic>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ };
+
+ aliases {
+ rproc0 = &dsp0;
+ rproc1 = &dsp1;
+ rproc2 = &dsp2;
+ rproc3 = &dsp3;
+ rproc4 = &dsp4;
+ rproc5 = &dsp5;
+ rproc6 = &dsp6;
+ rproc7 = &dsp7;
+ };
+};
+
+&soc0 {
+ /include/ "keystone-k2hk-clocks.dtsi"
+
+ msm_ram: sram@c000000 {
+ compatible = "mmio-sram";
+ reg = <0x0c000000 0x600000>;
+ ranges = <0x0 0x0c000000 0x600000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bm-sram@5f0000 {
+ reg = <0x5f0000 0x8000>;
+ };
+ };
+
+ psc: power-sleep-controller@2350000 {
+ pscrst: reset-controller {
+ compatible = "ti,k2hk-pscrst", "ti,syscon-reset";
+ #reset-cells = <1>;
+
+ ti,reset-bits = <
+ 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
+ 0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */
+ 0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */
+ 0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */
+ 0xa4c 8 0xa4c 8 0x84c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 4: dsp4 */
+ 0xa50 8 0xa50 8 0x850 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 5: dsp5 */
+ 0xa54 8 0xa54 8 0x854 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 6: dsp6 */
+ 0xa58 8 0xa58 8 0x858 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 7: dsp7 */
+ >;
+ };
+ };
+
+ devctrl: device-state-control@2620000 {
+ dspgpio0: keystone_dsp_gpio@240 {
+ compatible = "ti,keystone-dsp-gpio";
+ reg = <0x240 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x240>;
+ };
+
+ dspgpio1: keystone_dsp_gpio@244 {
+ compatible = "ti,keystone-dsp-gpio";
+ reg = <0x244 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x244>;
+ };
+
+ dspgpio2: keystone_dsp_gpio@248 {
+ compatible = "ti,keystone-dsp-gpio";
+ reg = <0x248 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x248>;
+ };
+
+ dspgpio3: keystone_dsp_gpio@24c {
+ compatible = "ti,keystone-dsp-gpio";
+ reg = <0x24c 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x24c>;
+ };
+
+ dspgpio4: keystone_dsp_gpio@250 {
+ compatible = "ti,keystone-dsp-gpio";
+ reg = <0x250 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x250>;
+ };
+
+ dspgpio5: keystone_dsp_gpio@254 {
+ compatible = "ti,keystone-dsp-gpio";
+ reg = <0x254 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x254>;
+ };
+
+ dspgpio6: keystone_dsp_gpio@258 {
+ compatible = "ti,keystone-dsp-gpio";
+ reg = <0x258 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x258>;
+ };
+
+ dspgpio7: keystone_dsp_gpio@25c {
+ compatible = "ti,keystone-dsp-gpio";
+ reg = <0x25c 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x25c>;
+ };
+ };
+
+ dsp0: dsp@10800000 {
+ compatible = "ti,k2hk-dsp";
+ reg = <0x10800000 0x00100000>,
+ <0x10e00000 0x00008000>,
+ <0x10f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem0>;
+ ti,syscon-dev = <&devctrl 0x40>;
+ resets = <&pscrst 0>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <0 8>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio0 27 0>;
+ status = "disabled";
+ };
+
+ dsp1: dsp@11800000 {
+ compatible = "ti,k2hk-dsp";
+ reg = <0x11800000 0x00100000>,
+ <0x11e00000 0x00008000>,
+ <0x11f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem1>;
+ ti,syscon-dev = <&devctrl 0x44>;
+ resets = <&pscrst 1>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <1 9>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio1 27 0>;
+ status = "disabled";
+ };
+
+ dsp2: dsp@12800000 {
+ compatible = "ti,k2hk-dsp";
+ reg = <0x12800000 0x00100000>,
+ <0x12e00000 0x00008000>,
+ <0x12f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem2>;
+ ti,syscon-dev = <&devctrl 0x48>;
+ resets = <&pscrst 2>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <2 10>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio2 27 0>;
+ status = "disabled";
+ };
+
+ dsp3: dsp@13800000 {
+ compatible = "ti,k2hk-dsp";
+ reg = <0x13800000 0x00100000>,
+ <0x13e00000 0x00008000>,
+ <0x13f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem3>;
+ ti,syscon-dev = <&devctrl 0x4c>;
+ resets = <&pscrst 3>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <3 11>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio3 27 0>;
+ status = "disabled";
+ };
+
+ dsp4: dsp@14800000 {
+ compatible = "ti,k2hk-dsp";
+ reg = <0x14800000 0x00100000>,
+ <0x14e00000 0x00008000>,
+ <0x14f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem4>;
+ ti,syscon-dev = <&devctrl 0x50>;
+ resets = <&pscrst 4>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <4 12>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio4 27 0>;
+ status = "disabled";
+ };
+
+ dsp5: dsp@15800000 {
+ compatible = "ti,k2hk-dsp";
+ reg = <0x15800000 0x00100000>,
+ <0x15e00000 0x00008000>,
+ <0x15f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem5>;
+ ti,syscon-dev = <&devctrl 0x54>;
+ resets = <&pscrst 5>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <5 13>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio5 27 0>;
+ status = "disabled";
+ };
+
+ dsp6: dsp@16800000 {
+ compatible = "ti,k2hk-dsp";
+ reg = <0x16800000 0x00100000>,
+ <0x16e00000 0x00008000>,
+ <0x16f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem6>;
+ ti,syscon-dev = <&devctrl 0x58>;
+ resets = <&pscrst 6>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <6 14>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio6 27 0>;
+ status = "disabled";
+ };
+
+ dsp7: dsp@17800000 {
+ compatible = "ti,k2hk-dsp";
+ reg = <0x17800000 0x00100000>,
+ <0x17e00000 0x00008000>,
+ <0x17f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem7>;
+ ti,syscon-dev = <&devctrl 0x5c>;
+ resets = <&pscrst 7>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <7 15>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio7 27 0>;
+ status = "disabled";
+ };
+
+ mdio: mdio@2090300 {
+ compatible = "ti,keystone_mdio", "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x02090300 0x100>;
+ status = "disabled";
+ clocks = <&clkcpgmac>;
+ clock-names = "fck";
+ bus_freq = <2500000>;
+ };
+ /include/ "keystone-k2hk-netcp.dtsi"
+};
diff --git a/src/arm/ti/keystone/keystone-k2l-clocks.dtsi b/src/arm/ti/keystone/keystone-k2l-clocks.dtsi
new file mode 100644
index 0000000..6355280
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-k2l-clocks.dtsi
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 lamarr SoC clock nodes
+ *
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+clocks {
+ armpllclk: armpllclk@2620370 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclksys>;
+ clock-output-names = "arm-pll-clk";
+ reg = <0x02620370 4>;
+ reg-names = "control";
+ };
+
+ mainpllclk: mainpllclk@2310110 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,main-pll-clock";
+ clocks = <&refclksys>;
+ reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+ reg-names = "control", "multiplier", "post-divider";
+ };
+
+ papllclk: papllclk@2620358 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclksys>;
+ clock-output-names = "papllclk";
+ reg = <0x02620358 4>;
+ reg-names = "control";
+ };
+
+ ddr3apllclk: ddr3apllclk@2620360 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclksys>;
+ clock-output-names = "ddr-3a-pll-clk";
+ reg = <0x02620360 4>;
+ reg-names = "control";
+ };
+
+ clkdfeiqnsys: clkdfeiqnsys@2350004 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk12>;
+ clock-output-names = "dfe";
+ reg-names = "control", "domain";
+ reg = <0x02350004 0xb00>, <0x02350000 0x400>;
+ domain-id = <0>;
+ };
+
+ clkpcie1: clkpcie1@235002c {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk12>;
+ clock-output-names = "pcie";
+ reg = <0x0235002c 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <4>;
+ };
+
+ clkgem1: clkgem1@2350040 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem1";
+ reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <9>;
+ };
+
+ clkgem2: clkgem2@2350044 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem2";
+ reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <10>;
+ };
+
+ clkgem3: clkgem3@2350048 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem3";
+ reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <11>;
+ };
+
+ clktac: clktac@2350064 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tac";
+ reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <17>;
+ };
+
+ clkrac: clkrac@2350068 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "rac";
+ reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <17>;
+ };
+
+ clkdfepd0: clkdfepd0@235006c {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "dfe-pd0";
+ reg = <0x0235006c 0xb00>, <0x02350044 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <18>;
+ };
+
+ clkfftc0: clkfftc0@2350070 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "fftc-0";
+ reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <19>;
+ };
+
+ clkosr: clkosr@2350088 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "osr";
+ reg = <0x02350088 0xb00>, <0x0235004c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <21>;
+ };
+
+ clktcp3d0: clktcp3d0@235008c {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tcp3d-0";
+ reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <22>;
+ };
+
+ clktcp3d1: clktcp3d1@2350094 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tcp3d-1";
+ reg = <0x02350094 0xb00>, <0x02350058 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <23>;
+ };
+
+ clkvcp0: clkvcp0@235009c {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-0";
+ reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <24>;
+ };
+
+ clkvcp1: clkvcp1@23500a0 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-1";
+ reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <24>;
+ };
+
+ clkvcp2: clkvcp2@23500a4 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-2";
+ reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <24>;
+ };
+
+ clkvcp3: clkvcp3@23500a8 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-3";
+ reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <24>;
+ };
+
+ clkbcp: clkbcp@23500bc {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "bcp";
+ reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <26>;
+ };
+
+ clkdfepd1: clkdfepd1@23500c0 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "dfe-pd1";
+ reg = <0x023500c0 0xb00>, <0x02350044 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <27>;
+ };
+
+ clkfftc1: clkfftc1@23500c4 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "fftc-1";
+ reg = <0x023500c4 0xb00>, <0x023504c0 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <28>;
+ };
+
+ clkiqnail: clkiqnail@23500c8 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "iqn-ail";
+ reg = <0x023500c8 0xb00>, <0x0235004c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <29>;
+ };
+
+ clkuart2: clkuart2@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkmodrst0>;
+ clock-output-names = "uart2";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clkuart3: clkuart3@2350000 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkmodrst0>;
+ clock-output-names = "uart3";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+};
diff --git a/src/arm/ti/keystone/keystone-k2l-evm.dts b/src/arm/ti/keystone/keystone-k2l-evm.dts
new file mode 100644
index 0000000..be619e3
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-k2l-evm.dts
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 Lamarr EVM device tree
+ *
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "keystone-k2l.dtsi"
+
+/ {
+ compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone";
+ model = "Texas Instruments Keystone 2 Lamarr EVM";
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dsp_common_memory: dsp-common-memory@81f800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+ reusable;
+ status = "okay";
+ };
+ };
+};
+
+&soc0 {
+ clocks {
+ refclksys: refclksys {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <122880000>;
+ clock-output-names = "refclk-sys";
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&keystone_usb0 {
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "host";
+};
+
+&i2c0 {
+ eeprom@50 {
+ compatible = "atmel,24c1024";
+ reg = <0x50>;
+ };
+};
+
+&aemif {
+ cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-ranges;
+ ranges;
+
+ ti,cs-chipselect = <0>;
+ /* all timings in nanoseconds */
+ ti,cs-min-turnaround-ns = <12>;
+ ti,cs-read-hold-ns = <6>;
+ ti,cs-read-strobe-ns = <23>;
+ ti,cs-read-setup-ns = <9>;
+ ti,cs-write-hold-ns = <8>;
+ ti,cs-write-strobe-ns = <23>;
+ ti,cs-write-setup-ns = <8>;
+
+ nand@0,0 {
+ compatible = "ti,keystone-nand","ti,davinci-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0 0x4000000
+ 1 0 0x0000100>;
+
+ ti,davinci-chipselect = <0>;
+ ti,davinci-mask-ale = <0x2000>;
+ ti,davinci-mask-cle = <0x4000>;
+ ti,davinci-mask-chipsel = <0>;
+ nand-ecc-mode = "hw";
+ ti,davinci-ecc-bits = <4>;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "params";
+ reg = <0x100000 0x80000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "ubifs";
+ reg = <0x180000 0x7fe80000>;
+ };
+ };
+ };
+};
+
+&spi0 {
+ nor_flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
+ spi-max-frequency = <54000000>;
+ m25p,fast-read;
+ reg = <0>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "misc";
+ reg = <0x80000 0xf80000>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+ ethphy0: ethernet-phy@0 {
+ compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&dsp0 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp1 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp2 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp3 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
diff --git a/src/arm/ti/keystone/keystone-k2l-netcp.dtsi b/src/arm/ti/keystone/keystone-k2l-netcp.dtsi
new file mode 100644
index 0000000..5ec6680
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-k2l-netcp.dtsi
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Keystone 2 Lamarr Netcp driver
+ *
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+qmss: qmss@2a40000 {
+ compatible = "ti,keystone-navigator-qmss";
+ dma-coherent;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&chipclk13>;
+ ranges;
+ queue-range = <0 0x2000>;
+ linkram0 = <0x100000 0x4000>;
+ linkram1 = <0x70000000 0x10000>; /* 1MB OSR mem */
+
+ qmgrs {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ qmgr0 {
+ managed-queues = <0 0x2000>;
+ reg = <0x2a40000 0x20000>,
+ <0x2a06000 0x400>,
+ <0x2a02000 0x1000>,
+ <0x2a03000 0x1000>,
+ <0x23a80000 0x20000>,
+ <0x2a80000 0x20000>;
+ reg-names = "peek", "status", "config",
+ "region", "push", "pop";
+ };
+ };
+ queue-pools {
+ qpend {
+ qpend-0 {
+ qrange = <658 8>;
+ interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+ 0 43 0xf04 0 44 0xf04 0 45 0xf04
+ 0 46 0xf04 0 47 0xf04>;
+ };
+ qpend-1 {
+ qrange = <528 16>;
+ interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+ 0 51 0xf04 0 52 0xf04 0 53 0xf04
+ 0 54 0xf04 0 55 0xf04 0 56 0xf04
+ 0 57 0xf04 0 58 0xf04 0 59 0xf04
+ 0 60 0xf04 0 61 0xf04 0 62 0xf04
+ 0 63 0xf04>;
+ qalloc-by-id;
+ };
+ qpend-2 {
+ qrange = <544 16>;
+ interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+ 0 59 0xf04 0 68 0xf04 0 69 0xf04
+ 0 70 0xf04 0 71 0xf04 0 72 0xf04
+ 0 73 0xf04 0 74 0xf04 0 75 0xf04
+ 0 76 0xf04 0 77 0xf04 0 78 0xf04
+ 0 79 0xf04>;
+ };
+ };
+ general-purpose {
+ gp-0 {
+ qrange = <4000 64>;
+ };
+ netcp-tx {
+ qrange = <896 128>;
+ qalloc-by-id;
+ };
+ };
+ accumulator {
+ acc-low-0 {
+ qrange = <480 32>;
+ accumulator = <0 47 16 2 50>;
+ interrupts = <0 226 0xf01>;
+ multi-queue;
+ };
+ };
+ };
+
+ descriptor-regions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ region-12 {
+ id = <12>;
+ region-spec = <8192 128>; /* num_desc desc_size */
+ link-index = <0x4000>;
+ };
+ };
+
+ pdsps {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ pdsp0@2a10000 {
+ reg = <0x2a10000 0x1000 /*iram */
+ 0x2a0f000 0x100 /*reg*/
+ 0x2a0c000 0x3c8 /*intd */
+ 0x2a20000 0x4000>; /*cmd*/
+ id = <0>;
+ };
+ };
+
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+ compatible = "ti,keystone-navigator-dma";
+ clocks = <&papllclk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,navigator-cloud-address = <0x23a80000 0x23a90000>;
+
+ dma_gbe: dma_gbe@0 {
+ reg = <0x26186000 0x100>,
+ <0x26187000 0x2a0>,
+ <0x26188000 0xb60>,
+ <0x26186100 0x80>,
+ <0x26189000 0x1000>;
+ reg-names = "global", "txchan", "rxchan",
+ "txsched", "rxflow";
+ };
+};
+
+netcp: netcp@26000000 {
+ reg = <0x2620110 0x8>;
+ reg-names = "efuse";
+ compatible = "ti,netcp-1.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* NetCP address range */
+ ranges = <0 0x26000000 0x1000000>;
+
+ clocks = <&clkpa>, <&clkcpgmac>;
+ clock-names = "pa_clk", "ethss_clk";
+ dma-coherent;
+
+ ti,navigator-dmas = <&dma_gbe 0>,
+ <&dma_gbe 8>,
+ <&dma_gbe 0>;
+ ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+
+ netcp-devices {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ gbe@200000 { /* ETHSS */
+ label = "netcp-gbe";
+ compatible = "ti,netcp-gbe-5";
+ reg = <0x200000 0x900>, <0x220000 0x20000>;
+ /* enable-ale; */
+ tx-queue = <896>;
+ tx-channel = "nettx";
+
+ cpts {
+ clocks = <&cpts_refclk_mux>;
+ clock-names = "cpts";
+
+ cpts_refclk_mux: cpts-refclk-mux {
+ #clock-cells = <0>;
+ clocks = <&chipclk12>, <&chipclk13>,
+ <&timi0>, <&timi1>,
+ <&tsrefclk>;
+ ti,mux-tbl = <0x0>, <0x1>, <0x2>,
+ <0x3>, <0x8>;
+ assigned-clocks = <&cpts_refclk_mux>;
+ assigned-clock-parents = <&chipclk12>;
+ };
+ };
+
+ interfaces {
+ gbe0: interface-0 {
+ slave-port = <0>;
+ link-interface = <1>;
+ phy-handle = <ðphy0>;
+ };
+ gbe1: interface-1 {
+ slave-port = <1>;
+ link-interface = <1>;
+ phy-handle = <ðphy1>;
+ };
+ };
+
+ secondary-slave-ports {
+ port-2 {
+ slave-port = <2>;
+ link-interface = <2>;
+ };
+ port-3 {
+ slave-port = <3>;
+ link-interface = <2>;
+ };
+ };
+ };
+ };
+
+ netcp-interfaces {
+ interface-0 {
+ rx-channel = "netrx0";
+ rx-pool = <1024 12>;
+ tx-pool = <1024 12>;
+ rx-queue-depth = <128 128 0 0>;
+ rx-buffer-size = <1518 4096 0 0>;
+ rx-queue = <528>;
+ tx-completion-queue = <530>;
+ efuse-mac = <1>;
+ netcp-gbe = <&gbe0>;
+
+ };
+ interface-1 {
+ rx-channel = "netrx1";
+ rx-pool = <1024 12>;
+ tx-pool = <1024 12>;
+ rx-queue-depth = <128 128 0 0>;
+ rx-buffer-size = <1518 4096 0 0>;
+ rx-queue = <529>;
+ tx-completion-queue = <531>;
+ efuse-mac = <0>;
+ local-mac-address = [02 18 31 7e 3e 7f];
+ netcp-gbe = <&gbe1>;
+ };
+ };
+};
+
+sa_subsys: subsys@26080000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0x26080000 0x40000>;
+
+ sa_config: subsys@0 {
+ compatible = "syscon";
+ reg = <0x0 0x100>;
+ };
+
+ rng@24000 {
+ compatible = "ti,keystone-rng";
+ reg = <0x24000 0x1000>;
+ ti,syscon-sa-cfg = <&sa_config>;
+ clocks = <&clksa>;
+ clock-names = "fck";
+ };
+};
diff --git a/src/arm/ti/keystone/keystone-k2l.dtsi b/src/arm/ti/keystone/keystone-k2l.dtsi
new file mode 100644
index 0000000..2062fe5
--- /dev/null
+++ b/src/arm/ti/keystone/keystone-k2l.dtsi
@@ -0,0 +1,415 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 Lamarr SoC specific device tree
+ *
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/reset/ti-syscon.h>
+
+/ {
+ compatible = "ti,k2l", "ti,keystone";
+ model = "Texas Instruments Keystone 2 Lamarr SoC";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&gic>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ aliases {
+ rproc0 = &dsp0;
+ rproc1 = &dsp1;
+ rproc2 = &dsp2;
+ rproc3 = &dsp3;
+ };
+};
+
+&soc0 {
+ /include/ "keystone-k2l-clocks.dtsi"
+
+ uart2: serial@2348400 {
+ compatible = "ti,da830-uart", "ns16550a";
+ current-speed = <115200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ reg = <0x02348400 0x100>;
+ clocks = <&clkuart2>;
+ interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ uart3: serial@2348800 {
+ compatible = "ti,da830-uart", "ns16550a";
+ current-speed = <115200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ reg = <0x02348800 0x100>;
+ clocks = <&clkuart3>;
+ interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ gpio1: gpio@2348000 {
+ compatible = "ti,keystone-gpio";
+ reg = <0x02348000 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* HW Interrupts mapped to GPIO pins */
+ interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 155 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 165 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 401 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 402 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 403 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 404 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 405 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkgpio>;
+ clock-names = "gpio";
+ ti,ngpio = <32>;
+ ti,davinci-gpio-unbanked = <32>;
+ };
+
+ k2l_pmx: pinmux@2620690 {
+ compatible = "pinctrl-single";
+ reg = <0x02620690 0xc>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <2>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x1>;
+ status = "disabled";
+
+ uart3_emifa_pins: uart3-emifa-pins {
+ pinctrl-single,bits = <
+ /* UART3_EMIFA_SEL */
+ 0x0 0x0 0xc0
+ >;
+ };
+
+ uart2_emifa_pins: uart2-emifa-pins {
+ pinctrl-single,bits = <
+ /* UART2_EMIFA_SEL */
+ 0x0 0x0 0x30
+ >;
+ };
+
+ uart01_spi2_pins: uart01-spi2-pins {
+ pinctrl-single,bits = <
+ /* UART01_SPI2_SEL */
+ 0x0 0x0 0x4
+ >;
+ };
+
+ dfesync_rp1_pins: dfesync-rp1-pins {
+ pinctrl-single,bits = <
+ /* DFESYNC_RP1_SEL */
+ 0x0 0x0 0x2
+ >;
+ };
+
+ avsif_pins: avsif-pins {
+ pinctrl-single,bits = <
+ /* AVSIF_SEL */
+ 0x0 0x0 0x1
+ >;
+ };
+
+ gpio_emu_pins: gpio-emu-pins {
+ pinctrl-single,bits = <
+ /*
+ * GPIO_EMU_SEL[31]: 0-GPIO31, 1-EMU33
+ * GPIO_EMU_SEL[30]: 0-GPIO30, 1-EMU32
+ * GPIO_EMU_SEL[29]: 0-GPIO29, 1-EMU31
+ * GPIO_EMU_SEL[28]: 0-GPIO28, 1-EMU30
+ * GPIO_EMU_SEL[27]: 0-GPIO27, 1-EMU29
+ * GPIO_EMU_SEL[26]: 0-GPIO26, 1-EMU28
+ * GPIO_EMU_SEL[25]: 0-GPIO25, 1-EMU27
+ * GPIO_EMU_SEL[24]: 0-GPIO24, 1-EMU26
+ * GPIO_EMU_SEL[23]: 0-GPIO23, 1-EMU25
+ * GPIO_EMU_SEL[22]: 0-GPIO22, 1-EMU24
+ * GPIO_EMU_SEL[21]: 0-GPIO21, 1-EMU23
+ * GPIO_EMU_SEL[20]: 0-GPIO20, 1-EMU22
+ * GPIO_EMU_SEL[19]: 0-GPIO19, 1-EMU21
+ * GPIO_EMU_SEL[18]: 0-GPIO18, 1-EMU20
+ * GPIO_EMU_SEL[17]: 0-GPIO17, 1-EMU19
+ */
+ 0x4 0x0000 0xfffe0000
+ >;
+ };
+
+ gpio_timio_pins: gpio-timio-pins {
+ pinctrl-single,bits = <
+ /*
+ * GPIO_TIMIO_SEL[15]: 0-GPIO15, 1-TIMO7
+ * GPIO_TIMIO_SEL[14]: 0-GPIO14, 1-TIMO6
+ * GPIO_TIMIO_SEL[13]: 0-GPIO13, 1-TIMO5
+ * GPIO_TIMIO_SEL[12]: 0-GPIO12, 1-TIMO4
+ * GPIO_TIMIO_SEL[11]: 0-GPIO11, 1-TIMO3
+ * GPIO_TIMIO_SEL[10]: 0-GPIO10, 1-TIMO2
+ * GPIO_TIMIO_SEL[9]: 0-GPIO9, 1-TIMI7
+ * GPIO_TIMIO_SEL[8]: 0-GPIO8, 1-TIMI6
+ * GPIO_TIMIO_SEL[7]: 0-GPIO7, 1-TIMI5
+ * GPIO_TIMIO_SEL[6]: 0-GPIO6, 1-TIMI4
+ * GPIO_TIMIO_SEL[5]: 0-GPIO5, 1-TIMI3
+ * GPIO_TIMIO_SEL[4]: 0-GPIO4, 1-TIMI2
+ */
+ 0x4 0x0 0xfff0
+ >;
+ };
+
+ gpio_spi2cs_pins: gpio-spi2cs-pins {
+ pinctrl-single,bits = <
+ /*
+ * GPIO_SPI2CS_SEL[3]: 0-GPIO3, 1-SPI2CS4
+ * GPIO_SPI2CS_SEL[2]: 0-GPIO2, 1-SPI2CS3
+ * GPIO_SPI2CS_SEL[1]: 0-GPIO1, 1-SPI2CS2
+ * GPIO_SPI2CS_SEL[0]: 0-GPIO0, 1-SPI2CS1
+ */
+ 0x4 0x0 0xf
+ >;
+ };
+
+ gpio_dfeio_pins: gpio-dfeio-pins {
+ pinctrl-single,bits = <
+ /*
+ * GPIO_DFEIO_SEL[31]: 0-DFEIO17, 1-GPIO63
+ * GPIO_DFEIO_SEL[30]: 0-DFEIO16, 1-GPIO62
+ * GPIO_DFEIO_SEL[29]: 0-DFEIO15, 1-GPIO61
+ * GPIO_DFEIO_SEL[28]: 0-DFEIO14, 1-GPIO60
+ * GPIO_DFEIO_SEL[27]: 0-DFEIO13, 1-GPIO59
+ * GPIO_DFEIO_SEL[26]: 0-DFEIO12, 1-GPIO58
+ * GPIO_DFEIO_SEL[25]: 0-DFEIO11, 1-GPIO57
+ * GPIO_DFEIO_SEL[24]: 0-DFEIO10, 1-GPIO56
+ * GPIO_DFEIO_SEL[23]: 0-DFEIO9, 1-GPIO55
+ * GPIO_DFEIO_SEL[22]: 0-DFEIO8, 1-GPIO54
+ * GPIO_DFEIO_SEL[21]: 0-DFEIO7, 1-GPIO53
+ * GPIO_DFEIO_SEL[20]: 0-DFEIO6, 1-GPIO52
+ * GPIO_DFEIO_SEL[19]: 0-DFEIO5, 1-GPIO51
+ * GPIO_DFEIO_SEL[18]: 0-DFEIO4, 1-GPIO50
+ * GPIO_DFEIO_SEL[17]: 0-DFEIO3, 1-GPIO49
+ * GPIO_DFEIO_SEL[16]: 0-DFEIO2, 1-GPIO48
+ */
+ 0x8 0x0 0xffff0000
+ >;
+ };
+
+ gpio_emifa_pins: gpio-emifa-pins {
+ pinctrl-single,bits = <
+ /*
+ * GPIO_EMIFA_SEL[15]: 0-EMIFA17, 1-GPIO47
+ * GPIO_EMIFA_SEL[14]: 0-EMIFA16, 1-GPIO46
+ * GPIO_EMIFA_SEL[13]: 0-EMIFA15, 1-GPIO45
+ * GPIO_EMIFA_SEL[12]: 0-EMIFA14, 1-GPIO44
+ * GPIO_EMIFA_SEL[11]: 0-EMIFA13, 1-GPIO43
+ * GPIO_EMIFA_SEL[10]: 0-EMIFA10, 1-GPIO42
+ * GPIO_EMIFA_SEL[9]: 0-EMIFA9, 1-GPIO41
+ * GPIO_EMIFA_SEL[8]: 0-EMIFA8, 1-GPIO40
+ * GPIO_EMIFA_SEL[7]: 0-EMIFA7, 1-GPIO39
+ * GPIO_EMIFA_SEL[6]: 0-EMIFA6, 1-GPIO38
+ * GPIO_EMIFA_SEL[5]: 0-EMIFA5, 1-GPIO37
+ * GPIO_EMIFA_SEL[4]: 0-EMIFA4, 1-GPIO36
+ * GPIO_EMIFA_SEL[3]: 0-EMIFA3, 1-GPIO35
+ * GPIO_EMIFA_SEL[2]: 0-EMIFA2, 1-GPIO34
+ * GPIO_EMIFA_SEL[1]: 0-EMIFA1, 1-GPIO33
+ * GPIO_EMIFA_SEL[0]: 0-EMIFA0, 1-GPIO32
+ */
+ 0x8 0x0 0xffff
+ >;
+ };
+ };
+
+ msm_ram: sram@c000000 {
+ compatible = "mmio-sram";
+ reg = <0x0c000000 0x200000>;
+ ranges = <0x0 0x0c000000 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bm-sram@1f8000 {
+ reg = <0x001f8000 0x8000>;
+ };
+ };
+
+ psc: power-sleep-controller@2350000 {
+ pscrst: reset-controller {
+ compatible = "ti,k2l-pscrst", "ti,syscon-reset";
+ #reset-cells = <1>;
+
+ ti,reset-bits = <
+ 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
+ 0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */
+ 0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */
+ 0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */
+ >;
+ };
+ };
+
+ osr: sram@70000000 {
+ compatible = "mmio-sram";
+ reg = <0x70000000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&clkosr>;
+ };
+
+ devctrl: device-state-control@2620000 {
+ dspgpio0: keystone_dsp_gpio@240 {
+ compatible = "ti,keystone-dsp-gpio";
+ reg = <0x240 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x240>;
+ };
+
+ dspgpio1: keystone_dsp_gpio@244 {
+ compatible = "ti,keystone-dsp-gpio";
+ reg = <0x244 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x244>;
+ };
+
+ dspgpio2: keystone_dsp_gpio@248 {
+ compatible = "ti,keystone-dsp-gpio";
+ reg = <0x248 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x248>;
+ };
+
+ dspgpio3: keystone_dsp_gpio@24c {
+ compatible = "ti,keystone-dsp-gpio";
+ reg = <0x24c 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x24c>;
+ };
+ };
+
+ dsp0: dsp@10800000 {
+ compatible = "ti,k2l-dsp";
+ reg = <0x10800000 0x00100000>,
+ <0x10e00000 0x00008000>,
+ <0x10f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem0>;
+ ti,syscon-dev = <&devctrl 0x844>;
+ resets = <&pscrst 0>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <0 8>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio0 27 0>;
+ status = "disabled";
+ };
+
+ dsp1: dsp@11800000 {
+ compatible = "ti,k2l-dsp";
+ reg = <0x11800000 0x00100000>,
+ <0x11e00000 0x00008000>,
+ <0x11f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem1>;
+ ti,syscon-dev = <&devctrl 0x848>;
+ resets = <&pscrst 1>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <1 9>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio1 27 0>;
+ status = "disabled";
+ };
+
+ dsp2: dsp@12800000 {
+ compatible = "ti,k2l-dsp";
+ reg = <0x12800000 0x00100000>,
+ <0x12e00000 0x00008000>,
+ <0x12f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem2>;
+ ti,syscon-dev = <&devctrl 0x84c>;
+ resets = <&pscrst 2>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <2 10>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio2 27 0>;
+ status = "disabled";
+ };
+
+ dsp3: dsp@13800000 {
+ compatible = "ti,k2l-dsp";
+ reg = <0x13800000 0x00100000>,
+ <0x13e00000 0x00008000>,
+ <0x13f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem3>;
+ ti,syscon-dev = <&devctrl 0x850>;
+ resets = <&pscrst 3>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <3 11>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio3 27 0>;
+ status = "disabled";
+ };
+
+ mdio: mdio@26200f00 {
+ compatible = "ti,keystone_mdio", "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x26200f00 0x100>;
+ status = "disabled";
+ clocks = <&clkcpgmac>;
+ clock-names = "fck";
+ bus_freq = <2500000>;
+ };
+ /include/ "keystone-k2l-netcp.dtsi"
+};
+
+&spi0 {
+ ti,davinci-spi-num-cs = <5>;
+};
+
+&spi1 {
+ ti,davinci-spi-num-cs = <3>;
+};
+
+&spi2 {
+ ti,davinci-spi-num-cs = <5>;
+ /* Pin muxed. Enabled and configured by Bootloader */
+ status = "disabled";
+};
diff --git a/src/arm/ti/keystone/keystone.dtsi b/src/arm/ti/keystone/keystone.dtsi
new file mode 100644
index 0000000..1fd04bb
--- /dev/null
+++ b/src/arm/ti/keystone/keystone.dtsi
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "ti,keystone";
+ model = "Texas Instruments Keystone 2 SoC";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &uart0;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ };
+
+ chosen { };
+
+ memory: memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
+ };
+
+ gic: interrupt-controller@2561000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x02561000 0x0 0x1000>,
+ <0x0 0x02562000 0x0 0x2000>,
+ <0x0 0x02564000 0x0 0x2000>,
+ <0x0 0x02566000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts =
+ <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ psci {
+ compatible = "arm,psci";
+ method = "smc";
+ cpu_suspend = <0x84000001>;
+ cpu_off = <0x84000002>;
+ cpu_on = <0x84000003>;
+ };
+
+ soc0: soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+ ranges = <0x0 0x0 0x0 0xc0000000>;
+ dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
+
+ pllctrl: pll-controller@2310000 {
+ compatible = "ti,keystone-pllctrl", "syscon";
+ reg = <0x02310000 0x200>;
+ };
+
+ psc: power-sleep-controller@2350000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x02350000 0x1000>;
+ };
+
+ devctrl: device-state-control@2620000 {
+ compatible = "ti,keystone-devctrl", "syscon", "simple-mfd";
+ reg = <0x02620000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x02620000 0x1000>;
+
+ kirq0: keystone_irq@2a0 {
+ compatible = "ti,keystone-irq";
+ reg = <0x2a0 0x4>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ti,syscon-dev = <&devctrl 0x2a0>;
+ };
+
+ rstctrl: reset-controller@328 {
+ compatible = "ti,keystone-reset";
+ reg = <0x328 0x10>;
+ ti,syscon-pll = <&pllctrl 0xe4>;
+ ti,syscon-dev = <&devctrl 0x328>;
+ ti,wdt-list = <0>;
+ };
+ };
+
+ /include/ "keystone-clocks.dtsi"
+
+ uart0: serial@2530c00 {
+ compatible = "ti,da830-uart", "ns16550a";
+ current-speed = <115200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ reg = <0x02530c00 0x100>;
+ clocks = <&clkuart0>;
+ interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ uart1: serial@2531000 {
+ compatible = "ti,da830-uart", "ns16550a";
+ current-speed = <115200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ reg = <0x02531000 0x100>;
+ clocks = <&clkuart1>;
+ interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ i2c0: i2c@2530000 {
+ compatible = "ti,davinci-i2c";
+ reg = <0x02530000 0x400>;
+ clock-frequency = <100000>;
+ clocks = <&clki2c>;
+ interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@2530400 {
+ compatible = "ti,davinci-i2c";
+ reg = <0x02530400 0x400>;
+ clock-frequency = <100000>;
+ clocks = <&clki2c>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@2530800 {
+ compatible = "ti,davinci-i2c";
+ reg = <0x02530800 0x400>;
+ clock-frequency = <100000>;
+ clocks = <&clki2c>;
+ interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi0: spi@21000400 {
+ compatible = "ti,keystone-spi", "ti,dm6441-spi";
+ reg = <0x21000400 0x200>;
+ num-cs = <4>;
+ ti,davinci-spi-intr-line = <0>;
+ interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkspi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@21000600 {
+ compatible = "ti,keystone-spi", "ti,dm6441-spi";
+ reg = <0x21000600 0x200>;
+ num-cs = <4>;
+ ti,davinci-spi-intr-line = <0>;
+ interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkspi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi2: spi@21000800 {
+ compatible = "ti,keystone-spi", "ti,dm6441-spi";
+ reg = <0x21000800 0x200>;
+ num-cs = <4>;
+ ti,davinci-spi-intr-line = <0>;
+ interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkspi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ usb_phy: usb_phy@2620738 {
+ compatible = "ti,keystone-usbphy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2620738 24>;
+ status = "disabled";
+ };
+
+ keystone_usb0: usb@2680000 {
+ compatible = "ti,keystone-dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2680000 0x10000>;
+ clocks = <&clkusb>;
+ clock-names = "usb";
+ interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+ ranges;
+ dma-coherent;
+ dma-ranges;
+ status = "disabled";
+
+ usb0: usb@2690000 {
+ compatible = "snps,dwc3";
+ reg = <0x2690000 0x70000>;
+ interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+ usb-phy = <&usb_phy>, <&usb_phy>;
+ };
+ };
+
+ wdt: wdt@22f0080 {
+ compatible = "ti,keystone-wdt","ti,davinci-wdt";
+ reg = <0x022f0080 0x80>;
+ clocks = <&clkwdtimer0>;
+ };
+
+ clock_event: timer@22f0000 {
+ compatible = "ti,keystone-timer";
+ reg = <0x022f0000 0x80>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clktimer15>;
+ };
+
+ gpio0: gpio@260bf00 {
+ compatible = "ti,keystone-gpio";
+ reg = <0x0260bf00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* HW Interrupts mapped to GPIO pins */
+ interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkgpio>;
+ clock-names = "gpio";
+ ti,ngpio = <32>;
+ ti,davinci-gpio-unbanked = <32>;
+ };
+
+ aemif: aemif@21000a00 {
+ compatible = "ti,keystone-aemif", "ti,davinci-aemif";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clocks = <&clkaemif>;
+ clock-names = "aemif";
+ clock-ranges;
+
+ reg = <0x21000a00 0x00000100>;
+ ranges = <0 0 0x30000000 0x10000000
+ 1 0 0x21000a00 0x00000100>;
+ };
+
+ pcie0: pcie@21800000 {
+ compatible = "ti,keystone-pcie", "snps,dw-pcie";
+ clocks = <&clkpcie>;
+ clock-names = "pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
+ ranges = <0x82000000 0 0x50000000 0x50000000
+ 0 0x10000000>;
+
+ status = "disabled";
+ device_type = "pci";
+ num-lanes = <2>;
+ bus-range = <0x00 0xff>;
+
+ /* error interrupt */
+ interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */
+ <0 0 0 2 &pcie_intc0 1>, /* INT B */
+ <0 0 0 3 &pcie_intc0 2>, /* INT C */
+ <0 0 0 4 &pcie_intc0 3>; /* INT D */
+
+ pcie_msi_intc0: msi-interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pcie_intc0: legacy-interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ emif: emif@21010000 {
+ compatible = "ti,emif-keystone";
+ reg = <0x21010000 0x200>;
+ interrupts = <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gic>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/am335x-baltos-ir2110.dts b/src/arm/ti/omap/am335x-baltos-ir2110.dts
new file mode 100644
index 0000000..ea5882e
--- /dev/null
+++ b/src/arm/ti/omap/am335x-baltos-ir2110.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+ model = "OnRISC Baltos iR 2110";
+};
+
+&am33xx_pinmux {
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7) /* MMC1 CD */
+ >;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&davinci_mdio_sw {
+ phy0: ethernet-phy@0 {
+ reg = <1>;
+ };
+};
+
+&cpsw_port1 {
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <1>;
+ phy-handle = <&phy0>;
+};
+
+&cpsw_port2 {
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <2>;
+ phy-handle = <&phy1>;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+};
+
+&gpio0 {
+ gpio-line-names =
+ "MDIO",
+ "MDC",
+ "NC",
+ "NC",
+ "I2C1_SDA",
+ "I2C1_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "UART1_CTSN",
+ "UART1_RTSN",
+ "UART1_RX",
+ "UART1_TX",
+ "onrisc:blue:wlan",
+ "onrisc:green:app",
+ "USB0_DRVVBUS",
+ "ETH2_INT",
+ "NC",
+ "RMII1_TXD1",
+ "MMC1_DAT0",
+ "MMC1_DAT1",
+ "NC",
+ "NC",
+ "MMC1_DAT2",
+ "MMC1_DAT3",
+ "RMII1_TXD0",
+ "NC",
+ "GPMC_WAIT0",
+ "GPMC_WP_N";
+};
+
+&gpio1 {
+ gpio-line-names =
+ "GPMC_AD0",
+ "GPMC_AD1",
+ "GPMC_AD2",
+ "GPMC_AD3",
+ "GPMC_AD4",
+ "GPMC_AD5",
+ "GPMC_AD6",
+ "GPMC_AD7",
+ "NC",
+ "NC",
+ "CONSOLE_RX",
+ "CONSOLE_TX",
+ "NC",
+ "NC",
+ "NC",
+ "SD_CD",
+ "RGMII2_TCTL",
+ "RGMII2_RCTL",
+ "RGMII2_TD3",
+ "RGMII2_TD2",
+ "RGMII2_TD1",
+ "RGMII2_TD0",
+ "RGMII2_TCLK",
+ "RGMII2_RCLK",
+ "RGMII2_RD3",
+ "RGMII2_RD2",
+ "RGMII2_RD1",
+ "RGMII2_RD0",
+ "PMIC_INT1",
+ "GPMC_CSN0_Flash",
+ "MMC1_CLK",
+ "MMC1_CMD";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "GPMC_CSN3_BUS",
+ "GPMC_CLK",
+ "GPMC_ADVN_ALE",
+ "GPMC_OEN_RE_N",
+ "GPMC_WE_N",
+ "GPMC_BEN0_CLE",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "SW2_0",
+ "SW2_1",
+ "RMII1_RXD1",
+ "RMII1_RXD0",
+ "UART1_DTR",
+ "UART1_DSR",
+ "UART1_DCD",
+ "UART1_RI",
+ "MMC0_DAT3",
+ "MMC0_DAT2",
+ "MMC0_DAT1",
+ "MMC0_DAT0",
+ "MMC0_CLK",
+ "MMC0_CMD";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "onrisc:red:power",
+ "RMII1_CRS_DV",
+ "RMII1_RXER",
+ "RMII1_TXEN",
+ "NC",
+ "NC",
+ "NC",
+ "WLAN_IRQ",
+ "WLAN_EN",
+ "SW2_2",
+ "SW2_3",
+ "NC",
+ "NC",
+ "NC",
+ "ModeA0",
+ "ModeA1",
+ "ModeA2",
+ "ModeA3",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC";
+};
diff --git a/src/arm/ti/omap/am335x-baltos-ir3220.dts b/src/arm/ti/omap/am335x-baltos-ir3220.dts
new file mode 100644
index 0000000..ea4f8dd
--- /dev/null
+++ b/src/arm/ti/omap/am335x-baltos-ir3220.dts
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+ model = "OnRISC Baltos iR 3220";
+};
+
+&am33xx_pinmux {
+ tca6416_pins: tca6416-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+ >;
+ };
+
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
+
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7) /* MMC1 CD */
+ >;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&i2c1 {
+ tca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tca6416_pins>;
+ gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+ "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+ "ModeA0", "ModeA1", "ModeA2", "ModeA3",
+ "ModeB0", "ModeB1", "ModeB2", "ModeB3";
+ };
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cpsw_port1 {
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <1>;
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+};
+
+&cpsw_port2 {
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <2>;
+ phy-handle = <&phy1>;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+};
+
+&gpio0 {
+ gpio-line-names =
+ "MDIO",
+ "MDC",
+ "UART2_RX",
+ "UART2_TX",
+ "I2C1_SDA",
+ "I2C1_SCL",
+ "WLAN_BTN",
+ "W_DISABLE",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "UART1_CTSN",
+ "UART1_RTSN",
+ "UART1_RX",
+ "UART1_TX",
+ "onrisc:blue:wlan",
+ "onrisc:green:app",
+ "USB0_DRVVBUS",
+ "ETH2_INT",
+ "TCA6416_INT",
+ "RMII1_TXD1",
+ "MMC1_DAT0",
+ "MMC1_DAT1",
+ "NC",
+ "NC",
+ "MMC1_DAT2",
+ "MMC1_DAT3",
+ "RMII1_TXD0",
+ "NC",
+ "GPMC_WAIT0",
+ "GPMC_WP_N";
+};
+
+&gpio1 {
+ gpio-line-names =
+ "GPMC_AD0",
+ "GPMC_AD1",
+ "GPMC_AD2",
+ "GPMC_AD3",
+ "GPMC_AD4",
+ "GPMC_AD5",
+ "GPMC_AD6",
+ "GPMC_AD7",
+ "NC",
+ "NC",
+ "CONSOLE_RX",
+ "CONSOLE_TX",
+ "UART2_DTR",
+ "UART2_DSR",
+ "UART2_DCD",
+ "UART2_RI",
+ "RGMII2_TCTL",
+ "RGMII2_RCTL",
+ "RGMII2_TD3",
+ "RGMII2_TD2",
+ "RGMII2_TD1",
+ "RGMII2_TD0",
+ "RGMII2_TCLK",
+ "RGMII2_RCLK",
+ "RGMII2_RD3",
+ "RGMII2_RD2",
+ "RGMII2_RD1",
+ "RGMII2_RD0",
+ "PMIC_INT1",
+ "GPMC_CSN0_Flash",
+ "MMC1_CLK",
+ "MMC1_CMD";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "GPMC_CSN3_BUS",
+ "GPMC_CLK",
+ "GPMC_ADVN_ALE",
+ "GPMC_OEN_RE_N",
+ "GPMC_WE_N",
+ "GPMC_BEN0_CLE",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "SD_CD",
+ "SD_WP",
+ "RMII1_RXD1",
+ "RMII1_RXD0",
+ "UART1_DTR",
+ "UART1_DSR",
+ "UART1_DCD",
+ "UART1_RI",
+ "MMC0_DAT3",
+ "MMC0_DAT2",
+ "MMC0_DAT1",
+ "MMC0_DAT0",
+ "MMC0_CLK",
+ "MMC0_CMD";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "onrisc:red:power",
+ "RMII1_CRS_DV",
+ "RMII1_RXER",
+ "RMII1_TXEN",
+ "3G_PWR_EN",
+ "UART2_CTSN",
+ "UART2_RTSN",
+ "WLAN_IRQ",
+ "WLAN_EN",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "USB1_DRVVBUS",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC";
+};
diff --git a/src/arm/ti/omap/am335x-baltos-ir5221.dts b/src/arm/ti/omap/am335x-baltos-ir5221.dts
new file mode 100644
index 0000000..ec914f2
--- /dev/null
+++ b/src/arm/ti/omap/am335x-baltos-ir5221.dts
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+ model = "OnRISC Baltos iR 5221";
+};
+
+&am33xx_pinmux {
+ tca6416_pins: tca6416-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+ >;
+ };
+
+
+ dcan1_pins: dcan1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart0_ctsn.dcan1_tx_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* uart0_rtsn.dcan1_rx_mux0 */
+ >;
+ };
+
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
+
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7) /* MMC1 CD */
+ >;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&i2c1 {
+ tca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tca6416_pins>;
+ gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+ "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+ "ModeA0", "ModeA1", "ModeA2", "ModeA3",
+ "ModeB0", "ModeB1", "ModeB2", "ModeB3";
+ };
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cpsw_port1 {
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <1>;
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+};
+
+&cpsw_port2 {
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <2>;
+ phy-handle = <&phy1>;
+};
+
+&dcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins>;
+
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+};
+
+&gpio0 {
+ gpio-line-names =
+ "MDIO",
+ "MDC",
+ "UART2_RX",
+ "UART2_TX",
+ "I2C1_SDA",
+ "I2C1_SCL",
+ "WLAN_BTN",
+ "W_DISABLE",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "UART1_CTSN",
+ "UART1_RTSN",
+ "UART1_RX",
+ "UART1_TX",
+ "onrisc:blue:wlan",
+ "onrisc:green:app",
+ "USB0_DRVVBUS",
+ "ETH2_INT",
+ "TCA6416_INT",
+ "RMII1_TXD1",
+ "MMC1_DAT0",
+ "MMC1_DAT1",
+ "NC",
+ "NC",
+ "MMC1_DAT2",
+ "MMC1_DAT3",
+ "RMII1_TXD0",
+ "NC",
+ "GPMC_WAIT0",
+ "GPMC_WP_N";
+};
+
+&gpio1 {
+ gpio-line-names =
+ "GPMC_AD0",
+ "GPMC_AD1",
+ "GPMC_AD2",
+ "GPMC_AD3",
+ "GPMC_AD4",
+ "GPMC_AD5",
+ "GPMC_AD6",
+ "GPMC_AD7",
+ "DCAN1_TX",
+ "DCAN1_RX",
+ "CONSOLE_RX",
+ "CONSOLE_TX",
+ "UART2_DTR",
+ "UART2_DSR",
+ "UART2_DCD",
+ "UART2_RI",
+ "RGMII2_TCTL",
+ "RGMII2_RCTL",
+ "RGMII2_TD3",
+ "RGMII2_TD2",
+ "RGMII2_TD1",
+ "RGMII2_TD0",
+ "RGMII2_TCLK",
+ "RGMII2_RCLK",
+ "RGMII2_RD3",
+ "RGMII2_RD2",
+ "RGMII2_RD1",
+ "RGMII2_RD0",
+ "PMIC_INT1",
+ "GPMC_CSN0_Flash",
+ "MMC1_CLK",
+ "MMC1_CMD";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "GPMC_CSN3_BUS",
+ "GPMC_CLK",
+ "GPMC_ADVN_ALE",
+ "GPMC_OEN_RE_N",
+ "GPMC_WE_N",
+ "GPMC_BEN0_CLE",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "SD_CD",
+ "SD_WP",
+ "RMII1_RXD1",
+ "RMII1_RXD0",
+ "UART1_DTR",
+ "UART1_DSR",
+ "UART1_DCD",
+ "UART1_RI",
+ "MMC0_DAT3",
+ "MMC0_DAT2",
+ "MMC0_DAT1",
+ "MMC0_DAT0",
+ "MMC0_CLK",
+ "MMC0_CMD";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "onrisc:red:power",
+ "RMII1_CRS_DV",
+ "RMII1_RXER",
+ "RMII1_TXEN",
+ "3G_PWR_EN",
+ "UART2_CTSN",
+ "UART2_RTSN",
+ "WLAN_IRQ",
+ "WLAN_EN",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "USB1_DRVVBUS",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC";
+};
diff --git a/src/arm/ti/omap/am335x-baltos-leds.dtsi b/src/arm/ti/omap/am335x-baltos-leds.dtsi
new file mode 100644
index 0000000..6a52e42
--- /dev/null
+++ b/src/arm/ti/omap/am335x-baltos-leds.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/*#include "am33xx.dtsi"*/
+
+/ {
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds>;
+
+ compatible = "gpio-leds";
+
+ led-power {
+ label = "onrisc:red:power";
+ linux,default-trigger = "default-on";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ led-wlan {
+ label = "onrisc:blue:wlan";
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-app {
+ label = "onrisc:green:app";
+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ user_leds: user-leds-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mii1_col.gpio3_0 PWR LED */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mii1_txd3.gpio0_16 WLAN LED */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mii1_txd2.gpio0_17 APP LED */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/am335x-baltos.dtsi b/src/arm/ti/omap/am335x-baltos.dtsi
new file mode 100644
index 0000000..c14d5b7
--- /dev/null
+++ b/src/arm/ti/omap/am335x-baltos.dtsi
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+#include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "vscom,onrisc", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ vbat: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ wl12xx_vmmc: fixedregulator2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_gpio>;
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 8 0>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+};
+
+&am33xx_pinmux {
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLUP, MUX_MODE7) /* emu0.gpio3[7] */
+ >;
+ };
+
+ wl12xx_gpio: wl12xx-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT_PULLUP, MUX_MODE7) /* emu1.gpio3[8] */
+ >;
+ };
+
+ tps65910_pins: tps65910-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_ben1.gpio1[28] */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */
+ >;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_tx_en.rmii1_txen */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
+
+
+ /* Slave 2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ >;
+ };
+
+ cpsw_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+
+ /* Slave 2 reset value*/
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci-mdio-sleep-pins {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ nandflash_pins_s0: nandflash-s0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ >;
+ };
+};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins_s0>;
+ ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ status = "okay";
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ nand-bus-width = <8>;
+ ti,nand-ecc-opt = "bch8";
+ ti,nand-xfer-type = "prefetch-dma";
+
+ gpmc,device-nand = "true";
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ti,elm-id = <&elm>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps65910_pins>;
+ };
+
+ at24@50 {
+ compatible = "atmel,24c02";
+ pagesize = <8>;
+ reg = <0x50>;
+ };
+};
+
+#include "../../tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ ti,en-ck32k-xtal = <1>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1351500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+
+ phy1: ethernet-phy@1 {
+ reg = <7>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc_reg>;
+ status = "okay";
+};
+
+&mmc2 {
+ status = "okay";
+ vmmc-supply = <&wl12xx_vmmc>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&gpio0_target {
+ ti,no-reset-on-init;
+};
+
+&gpio3_target {
+ ti,no-reset-on-init;
+};
diff --git a/src/arm/ti/omap/am335x-base0033.dts b/src/arm/ti/omap/am335x-base0033.dts
new file mode 100644
index 0000000..eba843e
--- /dev/null
+++ b/src/arm/ti/omap/am335x-base0033.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
+ *
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ */
+
+#include "am335x-igep0033.dtsi"
+
+/ {
+ model = "IGEP COM AM335x on AQUILA Expansion";
+ compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
+
+ hdmi {
+ compatible = "ti,tilcdc,slave";
+ i2c = <&i2c0>;
+ pinctrl-names = "default", "off";
+ pinctrl-0 = <&nxp_hdmi_pins>;
+ pinctrl-1 = <&nxp_hdmi_off_pins>;
+ status = "okay";
+ };
+
+ leds_base {
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_base_pins>;
+
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "base:red:user";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */
+ default-state = "off";
+ };
+
+ led1 {
+ label = "base:green:user";
+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */
+ default-state = "off";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ nxp_hdmi_pins: nxp-hdmi-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+ >;
+ };
+ nxp_hdmi_off_pins: nxp-hdmi-off-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */
+ >;
+ };
+
+ leds_base_pins: leds-base-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn3.gpio2_0 */
+ >;
+ };
+};
+
+&lcdc {
+ status = "okay";
+};
+
+&i2c0 {
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+};
diff --git a/src/arm/ti/omap/am335x-bone-common.dtsi b/src/arm/ti/omap/am335x-bone-common.dtsi
new file mode 100644
index 0000000..96451c8
--- /dev/null
+++ b/src/arm/ti/omap/am335x-bone-common.dtsi
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
+ compatible = "gpio-leds";
+
+ led2 {
+ label = "beaglebone:green:heartbeat";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led3 {
+ label = "beaglebone:green:mmc0";
+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led4 {
+ label = "beaglebone:green:usr2";
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+
+ led5 {
+ label = "beaglebone:green:usr3";
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+ };
+
+ vmmcsd_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&clkout2_pin>;
+
+ user_leds_s0: user-leds-s0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a7.gpio1_23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ >;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_ctsn.i2c2_sda */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_rtsn.i2c2_scl */
+ >;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ clkout2_pin: clkout2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ cpsw_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ /* Added to support GPIO controlled PHY reset */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci-mdio-sleep-pins {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ /* Added to support GPIO controlled PHY reset */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spio0_cs1.gpio0_6 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ emmc_pins: emmc-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "peripheral";
+ interrupts-extended = <&intc 18 &tps 0>;
+ interrupt-names = "mc", "vbus";
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+ baseboard_eeprom: baseboard_eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ vcc-supply = <&ldo4_reg>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ baseboard_data: baseboard_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ status = "okay";
+ clock-frequency = <100000>;
+
+ cape_eeprom0: cape_eeprom0@54 {
+ compatible = "atmel,24c256";
+ reg = <0x54>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cape0_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+
+ cape_eeprom1: cape_eeprom1@55 {
+ compatible = "atmel,24c256";
+ reg = <0x55>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cape1_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+
+ cape_eeprom2: cape_eeprom2@56 {
+ compatible = "atmel,24c256";
+ reg = <0x56>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cape2_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+
+ cape_eeprom3: cape_eeprom3@57 {
+ compatible = "atmel,24c256";
+ reg = <0x57>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cape3_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+};
+
+
+/include/ "../../tps65217.dtsi"
+
+&tps {
+ /*
+ * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+ * mode") at poweroff. Most BeagleBone versions do not support RTC-only
+ * mode and risk hardware damage if this mode is entered.
+ *
+ * For details, see linux-omap mailing list May 2015 thread
+ * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+ * In particular, messages:
+ * http://www.spinics.net/lists/linux-omap/msg118585.html
+ * http://www.spinics.net/lists/linux-omap/msg118615.html
+ *
+ * You can override this later with
+ * &tps { /delete-property/ ti,pmic-shutdown-controller; }
+ * if you want to use RTC-only mode and made sure you are not affected
+ * by the hardware problems. (Tip: double-check by performing a current
+ * measurement after shutdown: it should be less than 1 mA.)
+ */
+
+ interrupts = <7>; /* NMI */
+ interrupt-parent = <&intc>;
+
+ ti,pmic-shutdown-controller;
+
+ charger {
+ status = "okay";
+ };
+
+ pwrbutton {
+ status = "okay";
+ };
+
+ regulators {
+ dcdc1_reg: regulator@0 {
+ regulator-name = "vdds_dpr";
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1351500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ regulator-name = "vio,vrtc,vdds";
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ regulator-name = "vdd_3v3aux";
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ regulator-name = "vdd_1v8";
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ regulator-name = "vdd_3v3a";
+ regulator-always-on;
+ };
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "mii";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ /* Support GPIO reset on revision C3 boards */
+ reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <300>;
+ reset-deassert-us = <6500>;
+ };
+};
+
+&mmc1 {
+ status = "okay";
+ bus-width = <0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&aes {
+ status = "okay";
+};
+
+&sham {
+ status = "okay";
+};
+
+&rtc {
+ clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+ clock-names = "ext-clk", "int-clk";
+ system-power-controller;
+};
+
+&pruss_tm {
+ status = "okay";
+};
+
+&wkup_m3_ipc {
+ firmware-name = "am335x-bone-scale-data.bin";
+};
diff --git a/src/arm/ti/omap/am335x-bone.dts b/src/arm/ti/omap/am335x-bone.dts
new file mode 100644
index 0000000..b5d85ef
--- /dev/null
+++ b/src/arm/ti/omap/am335x-bone.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+/ {
+ model = "TI AM335x BeagleBone";
+ compatible = "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+};
+
+&mmc1 {
+ vmmc-supply = <&ldo3_reg>;
+};
diff --git a/src/arm/ti/omap/am335x-boneblack-common.dtsi b/src/arm/ti/omap/am335x-boneblack-common.dtsi
new file mode 100644
index 0000000..a7a8c61
--- /dev/null
+++ b/src/arm/ti/omap/am335x-boneblack-common.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&ldo3_reg {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ bus-width = <8>;
+ status = "okay";
+ non-removable;
+};
+
+/ {
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+};
diff --git a/src/arm/ti/omap/am335x-boneblack-hdmi.dtsi b/src/arm/ti/omap/am335x-boneblack-hdmi.dtsi
new file mode 100644
index 0000000..109f08f
--- /dev/null
+++ b/src/arm/ti/omap/am335x-boneblack-hdmi.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/display/tda998x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&am33xx_pinmux {
+ nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+ >;
+ };
+
+ mcasp0_pins: mcasp0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+ >;
+ };
+};
+
+&lcdc {
+ status = "okay";
+
+ /* If you want to get 24 bit RGB and 16 BGR mode instead of
+ * current 16 bit RGB and 24 BGR modes, set the propety
+ * below to "crossed" and uncomment the video-ports -property
+ * in tda19988 node.
+ */
+ blue-and-red-wiring = "straight";
+
+ port {
+ lcdc_0: endpoint@0 {
+ remote-endpoint = <&hdmi_0>;
+ };
+ };
+};
+
+&i2c0 {
+ tda19988: tda19988@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ nxp,calib-gpios = <&gpio1 25 0>;
+ interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default", "off";
+ pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+ pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+
+ /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
+ /* video-ports = <0x234501>; */
+
+ #sound-dai-cells = <0>;
+ audio-ports = < TDA998x_I2S 0x03>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_0: endpoint {
+ remote-endpoint = <&lcdc_0>;
+ };
+ };
+ };
+ };
+};
+
+&mcasp0 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp0_pins>;
+ status = "okay";
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 1 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+/ {
+ clk_mcasp0_fixed: clk_mcasp0_fixed {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24576000>;
+ };
+
+ clk_mcasp0: clk_mcasp0 {
+ #clock-cells = <0>;
+ compatible = "gpio-gate-clock";
+ clocks = <&clk_mcasp0_fixed>;
+ enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "TI BeagleBone Black";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink0_master>;
+ simple-audio-card,frame-master = <&dailink0_master>;
+
+ dailink0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp0>;
+ clocks = <&clk_mcasp0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tda19988>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/am335x-boneblack-wireless.dts b/src/arm/ti/omap/am335x-boneblack-wireless.dts
new file mode 100644
index 0000000..b4b4b80
--- /dev/null
+++ b/src/arm/ti/omap/am335x-boneblack-wireless.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-boneblack-hdmi.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "TI AM335x BeagleBone Black Wireless";
+ compatible = "ti,am335x-bone-black-wireless", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+ wlan_en_reg: fixedregulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <70000>;
+
+ /* WL_EN */
+ gpio = <&gpio3 9 0>;
+ enable-active-high;
+ };
+};
+
+&am33xx_pinmux {
+ bt_pins: bt-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gmii1_txd0.gpio0_28 - BT_EN */
+ >;
+ };
+
+ mmc3_pins: mmc3-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gmii1_rxd3.uart3_rxd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* gmii1_rxd2.uart3_txd */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3) /* mdio_data.uart3_ctsn */
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* mdio_clk.uart3_rtsn */
+ >;
+ };
+
+ wl18xx_pins: wl18xx-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gmii1_txclk.gpio3_9 WL_EN */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_refclk.gpio0_29 WL_IRQ */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gmii1_rxclk.gpio3_10 LS_BUF_EN */
+ >;
+ };
+};
+
+&mac_sw {
+ status = "disabled";
+};
+
+&mmc3 {
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
+ dma-names = "tx", "rx";
+ status = "okay";
+ vmmc-supply = <&wlan_en_reg>;
+ bus-width = <4>;
+ non-removable;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins &bt_pins>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "ti,wl1835-st";
+ enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&gpio3 {
+ ls-buf-en-hog {
+ gpio-hog;
+ gpios = <10 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "LS_BUF_EN";
+ };
+};
diff --git a/src/arm/ti/omap/am335x-boneblack.dts b/src/arm/ti/omap/am335x-boneblack.dts
new file mode 100644
index 0000000..16b567e
--- /dev/null
+++ b/src/arm/ti/omap/am335x-boneblack.dts
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-boneblack-hdmi.dtsi"
+
+/ {
+ model = "TI AM335x BeagleBone Black";
+ compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&cpu0_opp_table {
+ /*
+ * All PG 2.0 silicon may not support 1GHz but some of the early
+ * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
+ * to support 1GHz OPP so enable it for PG 2.0 on this board.
+ */
+ opp-1000000000 {
+ /* OPP Nitro */
+ opp-supported-hw = <0x06 0x0100>;
+ };
+};
+
+&gpio0 {
+ gpio-line-names =
+ "[mdio_data]",
+ "[mdio_clk]",
+ "P9_22 [spi0_sclk]",
+ "P9_21 [spi0_d0]",
+ "P9_18 [spi0_d1]",
+ "P9_17 [spi0_cs0]",
+ "[mmc0_cd]",
+ "P8_42A [ecappwm0]",
+ "P8_35 [lcd d12]",
+ "P8_33 [lcd d13]",
+ "P8_31 [lcd d14]",
+ "P8_32 [lcd d15]",
+ "P9_20 [i2c2_sda]",
+ "P9_19 [i2c2_scl]",
+ "P9_26 [uart1_rxd]",
+ "P9_24 [uart1_txd]",
+ "[rmii1_txd3]",
+ "[rmii1_txd2]",
+ "[usb0_drvvbus]",
+ "[hdmi cec]",
+ "P9_41B",
+ "[rmii1_txd1]",
+ "P8_19 [ehrpwm2a]",
+ "P8_13 [ehrpwm2b]",
+ "NC",
+ "NC",
+ "P8_14",
+ "P8_17",
+ "[rmii1_txd0]",
+ "[rmii1_refclk]",
+ "P9_11 [uart4_rxd]",
+ "P9_13 [uart4_txd]";
+};
+
+&gpio1 {
+ gpio-line-names =
+ "P8_25 [mmc1_dat0]",
+ "[mmc1_dat1]",
+ "P8_5 [mmc1_dat2]",
+ "P8_6 [mmc1_dat3]",
+ "P8_23 [mmc1_dat4]",
+ "P8_22 [mmc1_dat5]",
+ "P8_3 [mmc1_dat6]",
+ "P8_4 [mmc1_dat7]",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "P8_12",
+ "P8_11",
+ "P8_16",
+ "P8_15",
+ "P9_15A",
+ "P9_23",
+ "P9_14 [ehrpwm1a]",
+ "P9_16 [ehrpwm1b]",
+ "[emmc rst]",
+ "[usr0 led]",
+ "[usr1 led]",
+ "[usr2 led]",
+ "[usr3 led]",
+ "[hdmi irq]",
+ "[usb vbus oc]",
+ "[hdmi audio]",
+ "P9_12",
+ "P8_26",
+ "P8_21 [emmc]",
+ "P8_20 [emmc]";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "P9_15B",
+ "P8_18",
+ "P8_7",
+ "P8_8",
+ "P8_10",
+ "P8_9",
+ "P8_45 [hdmi]",
+ "P8_46 [hdmi]",
+ "P8_43 [hdmi]",
+ "P8_44 [hdmi]",
+ "P8_41 [hdmi]",
+ "P8_42 [hdmi]",
+ "P8_39 [hdmi]",
+ "P8_40 [hdmi]",
+ "P8_37 [hdmi]",
+ "P8_38 [hdmi]",
+ "P8_36 [hdmi]",
+ "P8_34 [hdmi]",
+ "[rmii1_rxd3]",
+ "[rmii1_rxd2]",
+ "[rmii1_rxd1]",
+ "[rmii1_rxd0]",
+ "P8_27 [hdmi]",
+ "P8_29 [hdmi]",
+ "P8_28 [hdmi]",
+ "P8_30 [hdmi]",
+ "[mmc0_dat3]",
+ "[mmc0_dat2]",
+ "[mmc0_dat1]",
+ "[mmc0_dat0]",
+ "[mmc0_clk]",
+ "[mmc0_cmd]";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "[mii col]",
+ "[mii crs]",
+ "[mii rx err]",
+ "[mii tx en]",
+ "[mii rx dv]",
+ "[i2c0 sda]",
+ "[i2c0 scl]",
+ "[jtag emu0]",
+ "[jtag emu1]",
+ "[mii tx clk]",
+ "[mii rx clk]",
+ "NC",
+ "NC",
+ "[usb vbus en]",
+ "P9_31 [spi1_sclk]",
+ "P9_29 [spi1_d0]",
+ "P9_30 [spi1_d1]",
+ "P9_28 [spi1_cs0]",
+ "P9_42B [ecappwm0]",
+ "P9_27",
+ "P9_41A",
+ "P9_25",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC";
+};
+
+&baseboard_eeprom {
+ vcc-supply = <&ldo4_reg>;
+};
diff --git a/src/arm/ti/omap/am335x-boneblue.dts b/src/arm/ti/omap/am335x-boneblue.dts
new file mode 100644
index 0000000..8013997
--- /dev/null
+++ b/src/arm/ti/omap/am335x-boneblue.dts
@@ -0,0 +1,616 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-osd335x-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "TI AM335x BeagleBone Blue";
+ compatible = "ti,am335x-bone-blue", "ti,am33xx";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
+ compatible = "gpio-leds";
+
+ usr_0_led {
+ label = "beaglebone:green:usr0";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ usr_1_led {
+ label = "beaglebone:green:usr1";
+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ usr_2_led {
+ label = "beaglebone:green:usr2";
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+
+ usr_3_led {
+ label = "beaglebone:green:usr3";
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ wifi_led {
+ label = "wifi";
+ gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "phy0assoc";
+ };
+
+ red_led {
+ label = "red";
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green_led {
+ label = "green";
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ batt_1_led {
+ label = "bat25";
+ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ batt_2_led {
+ label = "bat50";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ batt_3_led {
+ label = "bat75";
+ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ batt_4_led {
+ label = "bat100";
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ vmmcsd_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ wlan_en_reg: fixedregulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <70000>;
+
+ /* WL_EN */
+ gpio = <&gpio3 9 0>;
+ enable-active-high;
+ };
+};
+
+&am33xx_pinmux {
+ user_leds_s0: user-leds-s0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */
+
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */
+ >;
+ };
+
+ /* UT0 */
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ /* UT1 */
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ /* GPS */
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE1) /* (A17) spi0_sclk.uart2_rxd */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* (B17) spi0_d0.uart2_txd */
+ >;
+ };
+
+ /* DSM2 */
+ uart4_pins: uart4-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */
+ >;
+ };
+
+ /* UT5 */
+ uart5_pins: uart5-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* (U2) lcd_data9.uart5_rxd */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* (U1) lcd_data8.uart5_txd */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* (U9) gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* (V9) gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* (U7) gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* (V7) gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* (R8) gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (T8) gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* (U8) gpmc_ad4.mmc1_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* (V8) gpmc_ad5.mmc1_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* (R9) gpmc_ad6.mmc1_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* (T9) gpmc_ad7.mmc1_dat7 */
+ >;
+ };
+
+ mmc3_pins: mmc3-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6) /* (L15) gmii1_rxd1.mmc2_clk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6) /* (J16) gmii1_txen.mmc2_cmd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5) /* (J17) gmii1_rxdv.mmc2_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5) /* (J18) gmii1_txd3.mmc2_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5) /* (K15) gmii1_txd2.mmc2_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5) /* (H16) gmii1_col.mmc2_dat3 */
+ >;
+ };
+
+ bt_pins: bt-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* (K17) gmii1_txd0.gpio0[28] - BT_EN */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3) /* (M17) mdio_data.uart3_ctsn */
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* (M18) mdio_clk.uart3_rtsn */
+ >;
+ };
+
+ wl18xx_pins: wl18xx-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */
+ >;
+ };
+
+ /* DCAN */
+ dcan1_pins: dcan1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* (E17) uart0_rtsn.dcan1_rx */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* (E18) uart0_ctsn.dcan1_tx */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT, MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */
+ >;
+ };
+
+ /* E1 */
+ eqep0_pins: eqep0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT, MUX_MODE1) /* (B12) mcasp0_aclkr.eQEP0A_in */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT, MUX_MODE1) /* (C13) mcasp0_fsr.eQEP0B_in */
+ >;
+ };
+
+ /* E2 */
+ eqep1_pins: eqep1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT, MUX_MODE2) /* (V2) lcd_data12.eQEP1A_in */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_INPUT, MUX_MODE2) /* (V3) lcd_data13.eQEP1B_in */
+ >;
+ };
+
+ /* E3 */
+ eqep2_pins: eqep2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE4) /* (T12) gpmc_ad12.eQEP2A_in */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE4) /* (R12) gpmc_ad13.eQEP2B_in */
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_pins>;
+
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "peripheral";
+ interrupts-extended = <&intc 18 &tps 0>;
+ interrupt-names = "mc", "vbus";
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&i2c0 {
+ baseboard_eeprom: baseboard_eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ baseboard_data: baseboard_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ mpu9250@68 {
+ compatible = "invensense,mpu9250";
+ reg = <0x68>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ax8975@c {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0c>;
+ };
+ };
+ };
+
+ pressure@76 {
+ compatible = "bosch,bmp280";
+ reg = <0x76>;
+ };
+};
+
+/include/ "../../tps65217.dtsi"
+
+&tps {
+ /delete-property/ ti,pmic-shutdown-controller;
+
+ charger {
+ interrupts = <0>, <1>;
+ interrupt-names = "USB", "AC";
+ status = "okay";
+ };
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc2 {
+ status = "okay";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+};
+
+&mmc3 {
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
+ dma-names = "tx", "rx";
+ status = "okay";
+ vmmc-supply = <&wlan_en_reg>;
+ bus-width = <4>;
+ non-removable;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&tscadc {
+ status = "okay";
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins &bt_pins>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "ti,wl1835-st";
+ enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&rtc {
+ system-power-controller;
+ clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+ clock-names = "ext-clk", "int-clk";
+};
+
+&dcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins>;
+ status = "okay";
+};
+
+&gpio0 {
+ gpio-line-names =
+ "UART3_CTS", /* M17 */
+ "UART3_RTS", /* M18 */
+ "UART2_RX", /* A17 */
+ "UART2_TX", /* B17 */
+ "I2C1_SDA", /* B16 */
+ "I2C1_SCL", /* A16 */
+ "MMC0_CD", /* C15 */
+ "SPI1_SS2", /* C18 */
+ "EQEP_1A", /* V2 */
+ "EQEP_1B", /* V3 */
+ "MDIR_2B", /* V4 */
+ "BATT_LED_2", /* T5 */
+ "I2C2_SDA", /* D18 */
+ "I2C2_SCL", /* D17 */
+ "UART1_RX", /* D16 */
+ "UART1_TX", /* D15 */
+ "MMC2_DAT1", /* J18 */
+ "MMC2_DAT2", /* K15 */
+ "NC", /* F16 */
+ "WIFI_LED", /* A15 */
+ "MOT_STBY", /* D14 */
+ "WLAN_IRQ", /* K16 */
+ "PWM_2A", /* U10 */
+ "PWM_2B", /* T10 */
+ "",
+ "",
+ "BATT_LED_4", /* T11 */
+ "BATT_LED_1", /* U12 */
+ "BT_EN", /* K17 */
+ "SPI1_SS1", /* H18 */
+ "UART4_RX", /* T17 */
+ "MDIR_1B"; /* U17 */
+};
+
+&gpio1 {
+ gpio-line-names =
+ "MMC1_DAT0", /* U7 */
+ "MMC1_DAT1", /* V7 */
+ "MMC1_DAT2", /* R8 */
+ "MMC1_DAT3", /* T8 */
+ "MMC1_DAT4", /* U8 */
+ "MMC1_DAT5", /* V8 */
+ "MMC1_DAT6", /* R9 */
+ "MMC1_DAT7", /* T9 */
+ "DCAN1_TX", /* E18 */
+ "DCAN1_RX", /* E17 */
+ "UART0_RX", /* E15 */
+ "UART0_TX", /* E16 */
+ "EQEP_2A", /* T12 */
+ "EQEP_2B", /* R12 */
+ "PRU_E_A", /* V13 */
+ "PRU_E_B", /* U13 */
+ "MDIR_2A", /* R13 */
+ "GPIO1_17", /* V14 */
+ "PWM_1A", /* U14 */
+ "PWM_1B", /* T14 */
+ "EMMC_RST", /* R14 */
+ "USR_LED_0", /* V15 */
+ "USR_LED_1", /* U15 */
+ "USR_LED_2", /* T15 */
+ "USR_LED_3", /* V16 */
+ "GPIO1_25", /* U16 */
+ "MCASP0_AXR0", /* T16 */
+ "MCASP0_AXR1", /* V17 */
+ "MCASP0_ACLKR", /* U18 */
+ "BATT_LED_3", /* V6 */
+ "MMC1_CLK", /* U9 */
+ "MMC1_CMD"; /* V9 */
+};
+
+&gpio2 {
+ gpio-line-names =
+ "MDIR_1A", /* T13 */
+ "MCASP0_FSR", /* V12 */
+ "LED_RED", /* R7 */
+ "LED_GREEN", /* T7 */
+ "MODE_BTN", /* U6 */
+ "PAUSE_BTN", /* T6 */
+ "MDIR_4A", /* R1 */
+ "MDIR_4B", /* R2 */
+ "MDIR_3B", /* R3 */
+ "MDIR_3A", /* R4 */
+ "SVO7", /* T1 */
+ "SVO8", /* T2 */
+ "SVO5", /* T3 */
+ "SVO6", /* T4 */
+ "UART5_TX", /* U1 */
+ "UART5_RX", /* U2 */
+ "SERVO_EN", /* U3 */
+ "NC", /* U4 */
+ "UART3_RX", /* L17 */
+ "UART3_TX", /* L16 */
+ "MMC2_CLK", /* L15 */
+ "DCAN1_SILENT", /* M16 */
+ "SVO1", /* U5 */
+ "SVO3", /* R5 */
+ "SVO2", /* V5 */
+ "SVO4", /* R6 */
+ "MMC0_DAT3", /* F17 */
+ "MMC0_DAT2", /* F18 */
+ "MMC0_DAT1", /* G15 */
+ "MMC0_DAT0", /* G16 */
+ "MMC0_CLK", /* G17 */
+ "MMC0_CMD"; /* G18 */
+};
+
+&gpio3 {
+ gpio-line-names =
+ "MMC2_DAT3", /* H16 */
+ "GPIO3_1", /* H17 */
+ "GPIO3_2", /* J15 */
+ "MMC2_CMD", /* J16 */
+ "MMC2_DAT0", /* J17 */
+ "I2C0_SDA", /* C17 */
+ "I2C0_SCL", /* C16 */
+ "EMU1", /* C14 */
+ "EMU0", /* B14 */
+ "WL_EN", /* K18 */
+ "WL_BT_OE", /* L18 */
+ "",
+ "",
+ "NC", /* F15 */
+ "SPI1_SCK", /* A13 */
+ "SPI1_MISO", /* B13 */
+ "SPI1_MOSI", /* D12 */
+ "GPIO3_17", /* C12 */
+ "EQEP_0A", /* B12 */
+ "EQEP_0B", /* C13 */
+ "GPIO3_20", /* D13 */
+ "IMU_INT", /* A14 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "";
+
+ ls-buf-en-hog {
+ gpio-hog;
+ gpios = <10 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&eqep0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&eqep0_pins>;
+ status = "okay";
+};
+
+&epwmss1 {
+ status = "okay";
+};
+
+&eqep1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&eqep1_pins>;
+ status = "okay";
+};
+
+&epwmss2 {
+ status = "okay";
+};
+
+&eqep2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&eqep2_pins>;
+ status = "okay";
+};
diff --git a/src/arm/ti/omap/am335x-bonegreen-common.dtsi b/src/arm/ti/omap/am335x-bonegreen-common.dtsi
new file mode 100644
index 0000000..383beed
--- /dev/null
+++ b/src/arm/ti/omap/am335x-bonegreen-common.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&ldo3_reg {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&am33xx_pinmux {
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd */
+ >;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&rtc {
+ system-power-controller;
+};
diff --git a/src/arm/ti/omap/am335x-bonegreen-wireless.dts b/src/arm/ti/omap/am335x-bonegreen-wireless.dts
new file mode 100644
index 0000000..a4f5b52
--- /dev/null
+++ b/src/arm/ti/omap/am335x-bonegreen-wireless.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-bonegreen-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "TI AM335x BeagleBone Green Wireless";
+ compatible = "ti,am335x-bone-green-wireless", "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+ wlan_en_reg: fixedregulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <70000>;
+
+ /* WL_EN */
+ gpio = <&gpio0 26 0>;
+ enable-active-high;
+ };
+};
+
+&am33xx_pinmux {
+ bt_pins: bt-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN */
+ >;
+ };
+
+ mmc3_pins: mmc3-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gmii1_rxd3.uart3_rxd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* gmii1_rxd2.uart3_txd */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3) /* mdio_data.uart3_ctsn */
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* mdio_clk.uart3_rtsn */
+ >;
+ };
+
+ wl18xx_pins: wl18xx-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_csn0.gpio1_29 LS_BUF_EN */
+ >;
+ };
+};
+
+&mac_sw {
+ status = "disabled";
+};
+
+&mmc3 {
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
+ dma-names = "tx", "rx";
+ status = "okay";
+ vmmc-supply = <&wlan_en_reg>;
+ bus-width = <4>;
+ non-removable;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <27 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins &bt_pins>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "ti,wl1835-st";
+ enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&gpio1 {
+ ls-buf-en-hog {
+ gpio-hog;
+ gpios = <29 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "LS_BUF_EN";
+ };
+};
+
+/* BT_AUD_OUT from wl1835 has to be pulled low when WL_EN is activated.*/
+/* in case it isn't, wilink8 ends up in one of the test modes that */
+/* intruces various issues (elp wkaeup timeouts etc.) */
+/* On the BBGW this pin is routed through the level shifter (U21) that */
+/* introduces a pullup on the line and wilink8 ends up in a bad state. */
+/* use a gpio hog to force this pin low. An alternative may be adding */
+/* an external pulldown on U21 pin 4. */
+
+&gpio3 {
+ bt-aud-in-hog {
+ gpio-hog;
+ gpios = <16 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "MCASP0_AHCLKR";
+ };
+};
diff --git a/src/arm/ti/omap/am335x-bonegreen.dts b/src/arm/ti/omap/am335x-bonegreen.dts
new file mode 100644
index 0000000..18cc0f4
--- /dev/null
+++ b/src/arm/ti/omap/am335x-bonegreen.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-bonegreen-common.dtsi"
+
+/ {
+ model = "TI AM335x BeagleBone Green";
+ compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
diff --git a/src/arm/ti/omap/am335x-chiliboard.dts b/src/arm/ti/omap/am335x-chiliboard.dts
new file mode 100644
index 0000000..648e97f
--- /dev/null
+++ b/src/arm/ti/omap/am335x-chiliboard.dts
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/
+ * Author: Rostislav Lisovy <lisovy@jablotron.cz>
+ */
+/dts-v1/;
+#include "am335x-chilisom.dtsi"
+
+/ {
+ model = "AM335x Chiliboard";
+ compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom",
+ "ti,am33xx";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_gpio_pins>;
+
+ led0 {
+ label = "led0";
+ gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ cpsw_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* mdio_data.mdio_data */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ /* mdio_clk.mdio_clk */
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci-mdio-sleep-pins {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ usb1_drvvbus: usb1-drvvbus-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ sd_pins: sd-card-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
+ led_gpio_pins: led-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_OUTPUT, MUX_MODE7) /* emu0.gpio3_7 */
+ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT, MUX_MODE7) /* emu1.gpio3_8 */
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&ldo4_reg {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+};
+
+/* Ethernet */
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+/* USB */
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_drvvbus>;
+ dr_mode = "host";
+};
+
+/* microSD */
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pins>;
+ vmmc-supply = <&ldo4_reg>;
+ bus-width = <0x4>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&tps {
+ interrupt-parent = <&intc>;
+ interrupts = <7>; /* NNMI */
+
+ charger {
+ status = "okay";
+ };
+
+ pwrbutton {
+ status = "okay";
+ };
+};
diff --git a/src/arm/ti/omap/am335x-chilisom.dtsi b/src/arm/ti/omap/am335x-chilisom.dtsi
new file mode 100644
index 0000000..bd43da6
--- /dev/null
+++ b/src/arm/ti/omap/am335x-chilisom.dtsi
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/
+ * Author: Rostislav Lisovy <lisovy@jablotron.cz>
+ */
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Grinn AM335x ChiliSOM";
+ compatible = "grinn,am335x-chilisom", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ nandflash_pins: nandflash-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLDOWN, MUX_MODE0)
+
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+};
+
+/include/ "../../tps65217.dtsi"
+
+&tps {
+ regulators {
+ dcdc1_reg: regulator@0 {
+ regulator-name = "vdds_dpr";
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1325000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ regulator-name = "vio,vrtc,vdds";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ regulator-name = "vdd_3v3aux";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ regulator-name = "vdd_1v8";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ regulator-name = "vdd_3v3d";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+};
+
+&rtc {
+ system-power-controller;
+
+ pinctrl-0 = <&ext_wakeup>;
+ pinctrl-names = "default";
+
+ ext_wakeup: ext-wakeup {
+ pins = "ext_wakeup0";
+ input-enable;
+ };
+};
+
+/* NAND Flash */
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins>;
+ ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ };
+};
diff --git a/src/arm/ti/omap/am335x-cm-t335.dts b/src/arm/ti/omap/am335x-cm-t335.dts
new file mode 100644
index 0000000..72990e7
--- /dev/null
+++ b/src/arm/ti/omap/am335x-cm-t335.dts
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
+ *
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "CompuLab CM-T335";
+ compatible = "compulab,cm-t335", "ti,am33xx";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>; /* 128 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_led_pins>;
+ led0 {
+ label = "cm_t335:green";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; /* gpio2_0 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ /* regulator for mmc */
+ vmmc_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /* Regulator for WiFi */
+ vwlan_fixed: fixedregulator2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vwlan_fixed";
+ gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
+ enable-active-high;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 0>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "cm-t335";
+
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Line", "Line In",
+ "Headphone", "Headphone Jack";
+
+ simple-audio-card,routing =
+ "Headphone Jack", "LHPOUT",
+ "Headphone Jack", "RHPOUT",
+ "LLINEIN", "Line In",
+ "RLINEIN", "Line In",
+ "MICIN", "Mic Jack";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_master>;
+ simple-audio-card,frame-master = <&sound_master>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp1>;
+ };
+
+ sound_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic23>;
+ system-clock-frequency = <12000000>;
+ };
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&bluetooth_pins>;
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ /* uart0_ctsn.i2c1_sda */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE2)
+ /* uart0_rtsn.i2c1_scl */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)
+ >;
+ };
+
+ gpio_led_pins: gpio-led-pins {
+ pinctrl-single,pins = <
+ /* gpmc_csn3.gpio2_0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT, MUX_MODE7)
+ >;
+ };
+
+ nandflash_pins: nandflash-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ /* gpmc_wpn.gpio0_31 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
+ >;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ dcan0_pins: dcan0-pins {
+ pinctrl-single,pins = <
+ /* uart1_ctsn.dcan0_tx */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2)
+ /* uart1_rtsn.dcan0_rx */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT, MUX_MODE2)
+ >;
+ };
+
+ dcan1_pins: dcan1-pins {
+ pinctrl-single,pins = <
+ /* uart1_rxd.dcan1_tx */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT, MUX_MODE2)
+ /* uart1_txd.dcan1_rx */
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE2)
+ >;
+ };
+
+ ecap0_pins: ecap0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0)
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ /* mii1_tx_en.rgmii1_tctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ /* mii1_txd3.rgmii1_td3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ /* mii1_txd2.rgmii1_td2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ /* mii1_txd1.rgmii1_td1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ /* mii1_txd0.rgmii1_td0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ /* mii1_txclk.rgmii1_tclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ /* mii1_rxd3.rgmii1_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ /* mii1_rxd2.rgmii1_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ /* mii1_rxd1.rgmii1_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ /* mii1_rxd0.rgmii1_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ >;
+ };
+
+ cpsw_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci-mdio-sleep-pins {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ spi0_pins: spi0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_OUTPUT, MUX_MODE0)
+ >;
+ };
+
+ /* wl1271 bluetooth */
+ bluetooth_pins: bluetooth-pins {
+ pinctrl-single,pins = <
+ /* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLUP, MUX_MODE7)
+ >;
+ };
+
+ /* TLV320AIC23B codec */
+ mcasp1_pins: mcasp1-pins {
+ pinctrl-single,pins = <
+ /* MII1_CRS.mcasp1_aclkx */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4)
+ /* MII1_RX_ER.mcasp1_fsx */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4)
+ /* MII1_COL.mcasp1_axr2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE4)
+ /* RMII1_REF_CLK.mcasp1_axr3 */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4)
+ >;
+ };
+
+ /* wl1271 WiFi */
+ wifi_pins: wifi-pins {
+ pinctrl-single,pins = <
+ /* EMU1.gpio3_8 - WiFi IRQ */
+ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLUP, MUX_MODE7)
+ /* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT, MUX_MODE7)
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+/* WLS1271 bluetooth */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+
+status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+ /* CM-T335 board EEPROM */
+ eeprom: 24c02@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+ /* Real Time Clock */
+ ext_rtc: em3027@56 {
+ compatible = "emmicro,em3027";
+ reg = <0x56>;
+ };
+ /* Audio codec */
+ tlv320aic23: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+ };
+};
+
+&epwmss0 {
+ status = "okay";
+
+ ecap0: pwm@100 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins>;
+ };
+};
+
+&gpmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins>;
+ ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ /* MTD partition table */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "spl";
+ reg = <0x00000000 0x00200000>;
+ };
+ partition@1 {
+ label = "uboot";
+ reg = <0x00200000 0x00100000>;
+ };
+ partition@2 {
+ label = "uboot environment";
+ reg = <0x00300000 0x00100000>;
+ };
+ partition@3 {
+ label = "dtb";
+ reg = <0x00400000 0x00100000>;
+ };
+ partition@4 {
+ label = "splash";
+ reg = <0x00500000 0x00400000>;
+ };
+ partition@5 {
+ label = "linux";
+ reg = <0x00900000 0x00600000>;
+ };
+ partition@6 {
+ label = "rootfs";
+ reg = <0x00F00000 0>;
+ };
+ };
+};
+
+&elm {
+ status = "okay";
+};
+
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-txid";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmc_fixed>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+};
+
+&dcan0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan0_pins>;
+};
+
+&dcan1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins>;
+};
+
+/* Touschscreen and analog digital converter */
+&tscadc {
+ status = "okay";
+ tsc {
+ ti,wires = <4>;
+ ti,x-plate-resistance = <200>;
+ ti,coordinate-readouts = <5>;
+ ti,wire-config = <0x01 0x10 0x23 0x32>;
+ ti,charge-delay = <0x400>;
+ };
+
+ adc {
+ ti,adc-channels = <4 5 6 7>;
+ };
+};
+
+/* CPU audio */
+&mcasp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp1_pins>;
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 16 serializers */
+ num-serializer = <16>;
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0
+ >;
+ tx-num-evt = <1>;
+ rx-num-evt = <1>;
+
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ ti,pindir-d0-out-d1-in;
+ /* WLS1271 WiFi */
+ wlcore: wlcore@1 {
+ compatible = "ti,wl1271";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_pins>;
+ reg = <1>;
+ spi-max-frequency = <48000000>;
+ clock-xtal;
+ ref-clock-frequency = <38400000>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ vwlan-supply = <&vwlan_fixed>;
+ };
+};
diff --git a/src/arm/ti/omap/am335x-evm.dts b/src/arm/ti/omap/am335x-evm.dts
new file mode 100644
index 0000000..61bf8bc
--- /dev/null
+++ b/src/arm/ti/omap/am335x-evm.dts
@@ -0,0 +1,786 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "TI AM335x EVM";
+ compatible = "ti,am335x-evm", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ vbat: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ lis3_reg: fixedregulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "lis3_reg";
+ regulator-boot-on;
+ };
+
+ wlan_en_reg: fixedregulator2 {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ /* WLAN_EN GPIO for this board - Bank1, pin16 */
+ gpio = <&gpio1 16 0>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ /* TPS79501 */
+ v1_8d_reg: fixedregulator-v1_8d {
+ compatible = "regulator-fixed";
+ regulator-name = "v1_8d";
+ vin-supply = <&vbat>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ /* TPS79501 */
+ v3_3d_reg: fixedregulator-v3_3d {
+ compatible = "regulator-fixed";
+ regulator-name = "v3_3d";
+ vin-supply = <&vbat>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ matrix_keypad: matrix_keypad0 {
+ compatible = "gpio-matrix-keypad";
+ debounce-delay-ms = <5>;
+ col-scan-delay-us = <2>;
+
+ row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH /* Bank1, pin25 */
+ &gpio1 26 GPIO_ACTIVE_HIGH /* Bank1, pin26 */
+ &gpio1 27 GPIO_ACTIVE_HIGH>; /* Bank1, pin27 */
+
+ col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH /* Bank1, pin21 */
+ &gpio1 22 GPIO_ACTIVE_HIGH>; /* Bank1, pin22 */
+
+ linux,keymap = <0x0000008b /* MENU */
+ 0x0100009e /* BACK */
+ 0x02000069 /* LEFT */
+ 0x0001006a /* RIGHT */
+ 0x0101001c /* ENTER */
+ 0x0201006c>; /* DOWN */
+ };
+
+ gpio_keys: volume-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ switch-9 {
+ label = "volume-up";
+ linux,code = <115>;
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ switch-10 {
+ label = "volume-down";
+ linux,code = <114>;
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 0>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
+
+ panel {
+ compatible = "tfc,s9700rtwv43tr-01b";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins_s0>;
+ backlight = <&backlight>;
+
+ port {
+ panel_0: endpoint {
+ remote-endpoint = <&lcdc_0>;
+ };
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "AM335x-EVM";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound_master>;
+ simple-audio-card,frame-master = <&sound_master>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp1>;
+ };
+
+ sound_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ system-clock-frequency = <12000000>;
+ };
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
+
+ matrix_keypad_s0: matrix-keypad-s0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a9.gpio1_25 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a10.gpio1_26 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.gpio1_27 */
+ >;
+ };
+
+ volume_keys_s0: volume-keys-s0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* spi0_sclk.gpio0_2 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* spi0_d0.gpio0_3 */
+ >;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_d1.i2c1_sda */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ >;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ clkout2_pin: clkout2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ >;
+ };
+
+ nandflash_pins_s0: nandflash-s0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
+ >;
+ };
+
+ ecap0_pins: backlight-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0)
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ >;
+ };
+
+ cpsw_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci-mdio-sleep-pins {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */
+ >;
+ };
+
+ mmc3_pins: mmc3-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
+ >;
+ };
+
+ wlan_pins: wlan-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a0.gpio1_16 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT, MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */
+ >;
+ };
+
+ lcd_pins_s0: lcd-s0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad8.lcd_data23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad9.lcd_data22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad10.lcd_data21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad11.lcd_data20 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad12.lcd_data19 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad13.lcd_data18 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad14.lcd_data17 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad15.lcd_data16 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+ >;
+ };
+
+ mcasp1_pins: mcasp1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ >;
+ };
+
+ mcasp1_pins_sleep: mcasp1-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ dcan1_pins_default: dcan1-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+ };
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ status = "okay";
+ clock-frequency = <100000>;
+
+ lis331dlh: lis331dlh@18 {
+ compatible = "st,lis331dlh", "st,lis3lv02d";
+ reg = <0x18>;
+ Vdd-supply = <&lis3_reg>;
+ Vdd_IO-supply = <&lis3_reg>;
+
+ st,click-single-x;
+ st,click-single-y;
+ st,click-single-z;
+ st,click-thresh-x = <10>;
+ st,click-thresh-y = <10>;
+ st,click-thresh-z = <10>;
+ st,irq1-click;
+ st,irq2-click;
+ st,wakeup-x-lo;
+ st,wakeup-x-hi;
+ st,wakeup-y-lo;
+ st,wakeup-y-hi;
+ st,wakeup-z-lo;
+ st,wakeup-z-hi;
+ st,min-limit-x = <120>;
+ st,min-limit-y = <120>;
+ st,min-limit-z = <140>;
+ st,max-limit-x = <550>;
+ st,max-limit-y = <550>;
+ st,max-limit-z = <750>;
+ };
+
+ tsl2550: tsl2550@39 {
+ compatible = "taos,tsl2550";
+ reg = <0x39>;
+ };
+
+ tmp275: tmp275@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ tlv320aic3106: tlv320aic3106@1b {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x1b>;
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&v3_3d_reg>;
+ IOVDD-supply = <&v3_3d_reg>;
+ DRVDD-supply = <&v3_3d_reg>;
+ DVDD-supply = <&v1_8d_reg>;
+ };
+};
+
+&lcdc {
+ status = "okay";
+
+ blue-and-red-wiring = "crossed";
+
+ port {
+ lcdc_0: endpoint@0 {
+ remote-endpoint = <&panel_0>;
+ };
+ };
+};
+
+&elm {
+ status = "okay";
+};
+
+&epwmss0 {
+ status = "okay";
+
+ ecap0: pwm@100 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins>;
+ };
+};
+
+&gpmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins_s0>;
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ ti,nand-xfer-type = "prefetch-dma";
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ /* MTD partition table */
+ /* All SPL-* partitions are sized to minimal length
+ * which can be independently programmable. For
+ * NAND flash this is equal to size of erase-block */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "NAND.SPL";
+ reg = <0x00000000 0x00020000>;
+ };
+ partition@1 {
+ label = "NAND.SPL.backup1";
+ reg = <0x00020000 0x00020000>;
+ };
+ partition@2 {
+ label = "NAND.SPL.backup2";
+ reg = <0x00040000 0x00020000>;
+ };
+ partition@3 {
+ label = "NAND.SPL.backup3";
+ reg = <0x00060000 0x00020000>;
+ };
+ partition@4 {
+ label = "NAND.u-boot-spl-os";
+ reg = <0x00080000 0x00040000>;
+ };
+ partition@5 {
+ label = "NAND.u-boot";
+ reg = <0x000C0000 0x00100000>;
+ };
+ partition@6 {
+ label = "NAND.u-boot-env";
+ reg = <0x001C0000 0x00020000>;
+ };
+ partition@7 {
+ label = "NAND.u-boot-env.backup1";
+ reg = <0x001E0000 0x00020000>;
+ };
+ partition@8 {
+ label = "NAND.kernel";
+ reg = <0x00200000 0x00800000>;
+ };
+ partition@9 {
+ label = "NAND.file-system";
+ reg = <0x00A00000 0x0F600000>;
+ };
+ };
+};
+
+#include "../../tps65910.dtsi"
+
+&mcasp1 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp1_pins>;
+ pinctrl-1 = <&mcasp1_pins_sleep>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializers */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 1 2
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1351500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&tscadc {
+ status = "okay";
+ tsc {
+ ti,wires = <4>;
+ ti,x-plate-resistance = <200>;
+ ti,coordinate-readouts = <5>;
+ ti,wire-config = <0x00 0x11 0x22 0x33>;
+ ti,charge-delay = <0x400>;
+ };
+
+ adc {
+ ti,adc-channels = <4 5 6 7>;
+ };
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmc_reg>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc3 {
+ /* these are on the crossbar and are outlined in the
+ xbar-event-map element */
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
+ dma-names = "tx", "rx";
+ status = "okay";
+ vmmc-supply = <&wlan_en_reg>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins &wlan_pins>;
+ non-removable;
+ cap-power-off-card;
+ keep-power-in-suspend;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@0 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&dcan1 {
+ status = "disabled"; /* Enable only if Profile 1 is selected */
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins_default>;
+};
+
+&rtc {
+ clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+ clock-names = "ext-clk", "int-clk";
+};
+
+&pruss_tm {
+ status = "okay";
+};
+
+&wkup_m3_ipc {
+ firmware-name = "am335x-evm-scale-data.bin";
+};
diff --git a/src/arm/ti/omap/am335x-evmsk.dts b/src/arm/ti/omap/am335x-evmsk.dts
new file mode 100644
index 0000000..57f7884
--- /dev/null
+++ b/src/arm/ti/omap/am335x-evmsk.dts
@@ -0,0 +1,725 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * AM335x Starter Kit
+ * http://www.ti.com/tool/tmdssk3358
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "TI AM335x EVM-SK";
+ compatible = "ti,am335x-evmsk", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ vbat: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ lis3_reg: fixedregulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "lis3_reg";
+ regulator-boot-on;
+ };
+
+ wl12xx_vmmc: fixedregulator2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_gpio>;
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 29 0>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ vtt_fixed: fixedregulator3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vtt";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ };
+
+ /* TPS79518 */
+ v1_8d_reg: fixedregulator-v1_8d {
+ compatible = "regulator-fixed";
+ regulator-name = "v1_8d";
+ vin-supply = <&vbat>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ /* TPS78633 */
+ v3_3d_reg: fixedregulator-v3_3d {
+ compatible = "regulator-fixed";
+ regulator-name = "v3_3d";
+ vin-supply = <&vbat>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "evmsk:green:usr0";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "evmsk:green:usr1";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "evmsk:green:mmc0";
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led4 {
+ label = "evmsk:green:heartbeat";
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+
+ gpio_buttons: gpio_buttons0 {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch1 {
+ label = "button0";
+ linux,code = <0x100>;
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ switch2 {
+ label = "button1";
+ linux,code = <0x101>;
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ switch3 {
+ label = "button2";
+ linux,code = <0x102>;
+ gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
+ };
+
+ switch4 {
+ label = "button3";
+ linux,code = <0x103>;
+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ lcd_bl: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 58 61 66 75 90 125 170 255>;
+ default-brightness-level = <8>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "AM335x-EVMSK";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound_master>;
+ simple-audio-card,frame-master = <&sound_master>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp1>;
+ };
+
+ sound_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ system-clock-frequency = <24000000>;
+ };
+ };
+
+ panel {
+ compatible = "newhaven,nhd-4.3-480272ef-atxl";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&lcd_pins_default>;
+ pinctrl-1 = <&lcd_pins_sleep>;
+ backlight = <&lcd_bl>;
+
+ port {
+ panel_0: endpoint {
+ remote-endpoint = <&lcdc_0>;
+ };
+ };
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
+
+ lcd_pins_default: lcd-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad8.lcd_data23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad9.lcd_data22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad10.lcd_data21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad11.lcd_data20 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad12.lcd_data19 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad13.lcd_data18 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad14.lcd_data17 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad15.lcd_data16 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+ >;
+ };
+
+ lcd_pins_sleep: lcd-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad8.lcd_data23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad9.lcd_data22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad10.lcd_data21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad11.lcd_data20 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad12.lcd_data19 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad13.lcd_data18 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad14.lcd_data17 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad15.lcd_data16 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+
+ user_leds_s0: user-leds-s0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad4.gpio1_4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad5.gpio1_5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad6.gpio1_6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad7.gpio1_7 */
+ >;
+ };
+
+ gpio_keys_s0: gpio-keys-s0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_wait0.gpio0_30 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */
+ >;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ clkout2_pin: clkout2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ >;
+ };
+
+ ecap2_pins: backlight-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, 0x0, MUX_MODE4) /* mcasp0_ahclkr.ecap2_in_pwm2_out */
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+
+ /* Slave 2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ >;
+ };
+
+ cpsw_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+
+ /* Slave 2 reset value*/
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci-mdio-sleep-pins {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */
+ >;
+ };
+
+ mcasp1_pins: mcasp1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ >;
+ };
+
+ mcasp1_pins_sleep: mcasp1-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ >;
+ };
+
+ wl12xx_gpio: wl12xx-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_csn0.gpio1_29 */
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+ };
+
+ lis331dlh: lis331dlh@18 {
+ compatible = "st,lis331dlh", "st,lis3lv02d";
+ reg = <0x18>;
+ Vdd-supply = <&lis3_reg>;
+ Vdd_IO-supply = <&lis3_reg>;
+
+ st,click-single-x;
+ st,click-single-y;
+ st,click-single-z;
+ st,click-thresh-x = <10>;
+ st,click-thresh-y = <10>;
+ st,click-thresh-z = <10>;
+ st,irq1-click;
+ st,irq2-click;
+ st,wakeup-x-lo;
+ st,wakeup-x-hi;
+ st,wakeup-y-lo;
+ st,wakeup-y-hi;
+ st,wakeup-z-lo;
+ st,wakeup-z-hi;
+ st,min-limit-x = <120>;
+ st,min-limit-y = <120>;
+ st,min-limit-z = <140>;
+ st,max-limit-x = <550>;
+ st,max-limit-y = <550>;
+ st,max-limit-z = <750>;
+ };
+
+ tlv320aic3106: tlv320aic3106@1b {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x1b>;
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&v3_3d_reg>;
+ IOVDD-supply = <&v3_3d_reg>;
+ DRVDD-supply = <&v3_3d_reg>;
+ DVDD-supply = <&v1_8d_reg>;
+ };
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&epwmss2 {
+ status = "okay";
+
+ ecap2: pwm@100 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap2_pins>;
+ };
+};
+
+#include "../../tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1351500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <2>;
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmc_reg>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&gpio0_target {
+ ti,no-reset-on-init;
+};
+
+&mmc2 {
+ status = "okay";
+ vmmc-supply = <&wl12xx_vmmc>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <31 IRQ_TYPE_EDGE_RISING>; /* gpio 31 */
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&mcasp1 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp1_pins>;
+ pinctrl-1 = <&mcasp1_pins_sleep>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializers */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 1 2
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+&tscadc {
+ status = "okay";
+ tsc {
+ ti,wires = <4>;
+ ti,x-plate-resistance = <200>;
+ ti,coordinate-readouts = <5>;
+ ti,wire-config = <0x00 0x11 0x22 0x33>;
+ };
+};
+
+&lcdc {
+ status = "okay";
+
+ blue-and-red-wiring = "crossed";
+
+ port {
+ lcdc_0: endpoint@0 {
+ remote-endpoint = <&panel_0>;
+ };
+ };
+};
+
+&rtc {
+ clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+ clock-names = "ext-clk", "int-clk";
+};
+
+&pruss_tm {
+ status = "okay";
+};
+
+&wkup_m3_ipc {
+ firmware-name = "am335x-evm-scale-data.bin";
+};
diff --git a/src/arm/ti/omap/am335x-guardian.dts b/src/arm/ti/omap/am335x-guardian.dts
new file mode 100644
index 0000000..205fe0e
--- /dev/null
+++ b/src/arm/ti/omap/am335x-guardian.dts
@@ -0,0 +1,745 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2018 Robert Bosch Power Tools GmbH
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Bosch AM335x Guardian";
+ compatible = "bosch,am335x-guardian", "ti,am33xx";
+
+ chosen {
+ stdout-path = &uart0;
+ tick-timer = &timer2;
+ };
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ guardian_buttons: gpio-keys {
+ pinctrl-names = "default";
+ pinctrl-0 = <&guardian_button_pins>;
+ compatible = "gpio-keys";
+
+ select-button {
+ label = "guardian-select-button";
+ linux,code = <KEY_5>;
+ gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ power-button {
+ label = "guardian-power-button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+ };
+
+ guardian_leds: gpio-leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&guardian_led_pins>;
+ compatible = "gpio-leds";
+
+ life-led {
+ label = "guardian:life-led";
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ };
+
+ panel {
+ compatible = "ti,tilcdc,panel";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>;
+ pinctrl-1 = <&lcd_pins_sleep>;
+
+ display-timings {
+ 320x240 {
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <68>;
+ hfront-porch = <20>;
+ hsync-len = <1>;
+ vback-porch = <18>;
+ vfront-porch = <4>;
+ vsync-len = <1>;
+ clock-frequency = <9000000>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <24>;
+ bus-width = <16>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+
+ };
+
+ guardian_beeper: pwm-7 {
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&guardian_beeper_pins>;
+ ti,clock-source = <0x01>;
+ };
+
+ vmmcsd_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ mt_keypad: mt_keypad@0 {
+ compatible = "gpio-mt-keypad";
+ debounce-delay-ms = <10>;
+ col-scan-delay-us = <2>;
+ keypad,num-lines = <5>;
+ linux,no-autorepeat;
+ gpio-activelow;
+ line-gpios = <
+ &gpio1 24 GPIO_ACTIVE_LOW /*gpio_56*/
+ &gpio1 23 GPIO_ACTIVE_LOW /*gpio_55*/
+ &gpio1 22 GPIO_ACTIVE_LOW /*gpio_54*/
+ &gpio1 20 GPIO_ACTIVE_LOW /*gpio_52*/
+ &gpio1 16 GPIO_ACTIVE_LOW /*gpio_48*/
+ >;
+ };
+};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins>;
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
+ status = "okay";
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ ti,nand-xfer-type = "prefetch-dma";
+ ti,nand-ecc-opt = "bch16";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <30>;
+ gpmc,cs-wr-off-ns = <30>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <30>;
+ gpmc,adv-wr-off-ns = <30>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <15>;
+ gpmc,oe-on-ns = <1>;
+ gpmc,oe-off-ns = <15>;
+ gpmc,access-ns = <30>;
+ gpmc,rd-cycle-ns = <30>;
+ gpmc,wr-cycle-ns = <30>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ /*
+ * MTD partition table
+ *
+ * All SPL-* partitions are sized to minimal length which can
+ * be independently programmable. For NAND flash this is equal
+ * to size of erase-block.
+ */
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SPL";
+ reg = <0x0 0x40000>;
+ };
+
+ partition@1 {
+ label = "SPL.backup1";
+ reg = <0x40000 0x40000>;
+ };
+
+ partition@2 {
+ label = "SPL.backup2";
+ reg = <0x80000 0x40000>;
+ };
+
+ partition@3 {
+ label = "SPL.backup3";
+ reg = <0xc0000 0x40000>;
+ };
+
+ partition@4 {
+ label = "u-boot";
+ reg = <0x100000 0x100000>;
+ };
+
+ partition@5 {
+ label = "u-boot.backup1";
+ reg = <0x200000 0x100000>;
+ };
+
+ partition@6 {
+ label = "u-boot-2";
+ reg = <0x300000 0x100000>;
+ };
+
+ partition@7 {
+ label = "u-boot-2.backup1";
+ reg = <0x400000 0x100000>;
+ };
+
+ partition@8 {
+ label = "u-boot-env";
+ reg = <0x500000 0x40000>;
+ };
+
+ partition@9 {
+ label = "u-boot-env.backup1";
+ reg = <0x540000 0x40000>;
+ };
+
+ partition@10 {
+ label = "splash-screen";
+ reg = <0x580000 0x40000>;
+ };
+
+ partition@11 {
+ label = "UBI";
+ reg = <0x5c0000 0x1fa40000>;
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+};
+
+&lcdc {
+ blue-and-red-wiring = "crossed";
+ status = "okay";
+ port {
+ lcdc_0: endpoint@0 {
+ remote-endpoint = <0>;
+ };
+ };
+};
+
+&mmc1 {
+ bus-width = <0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ status = "okay";
+};
+
+&rtc {
+ clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+ clock-names = "ext-clk", "int-clk";
+};
+
+&spi0 {
+ ti,pindir-d0-out-d1-in;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ status = "okay";
+};
+
+#include "../../tps65217.dtsi"
+
+&tps {
+ /*
+ * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+ * mode") at poweroff. Most BeagleBone versions do not support RTC-only
+ * mode and risk hardware damage if this mode is entered.
+ *
+ * For details, see linux-omap mailing list May 2015 thread
+ * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+ * In particular, messages:
+ * http://www.spinics.net/lists/linux-omap/msg118585.html
+ * http://www.spinics.net/lists/linux-omap/msg118615.html
+ *
+ * You can override this later with
+ * &tps { /delete-property/ ti,pmic-shutdown-controller; }
+ * if you want to use RTC-only mode and made sure you are not affected
+ * by the hardware problems. (Tip: double-check by performing a current
+ * measurement after shutdown: it should be less than 1 mA.)
+ */
+ ti,pmic-shutdown-controller;
+ interrupt-parent = <&intc>;
+ interrupts = <7>; /* NMI */
+
+ backlight {
+ isel = <1>; /* 1 - ISET1, 2 ISET2 */
+ fdim = <500>; /* TPS65217_BL_FDIM_500HZ */
+ default-brightness = <50>;
+ /* 1(on) - enable current sink, while initialization */
+ /* 0(off) - disable current sink, while initialization */
+ isink-en = <1>;
+ };
+
+ regulators {
+ dcdc1_reg: regulator@0 {
+ regulator-name = "vdds_dpr";
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1351500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ regulator-name = "vio,vrtc,vdds";
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ regulator-name = "vdd_3v3aux";
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ regulator-name = "vdd_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ regulator-name = "vdd_3v3a";
+ regulator-always-on;
+ };
+ };
+};
+
+&tscadc {
+ status = "okay";
+
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6>;
+ };
+};
+
+&gpio0 {
+ gpio-line-names =
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "MirxWakeup",
+ "",
+ "";
+};
+
+&gpio3 {
+ ti,gpio-always-on;
+ ti,no-reset-on-init;
+ gpio-line-names =
+ "",
+ "MirxBtReset",
+ "",
+ "CcVolAdcEn",
+ "MirxBlePause",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AspEn",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "BatVolAdcEn",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "peripheral";
+};
+
+&usb1 {
+ dr_mode = "host";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&clkout2_pin &guardian_interface_pins>;
+
+ clkout2_pin: clkout2-pins {
+ pinctrl-single,pins = <
+ /* xdma_event_intr1.clkout2 */
+ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+ >;
+ };
+
+ guardian_interface_pins: interface-pins {
+ pinctrl-single,pins = <
+ /* ADC_BATSENSE_EN */
+ /* (A14) MCASP0_AHCLKx.gpio3[21] */
+ AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+ /* ADC_COINCELL_EN */
+ /* (J16) MII1_TX_EN.gpio3[3] */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+ /* ASP_ENABLE */
+ /* (A13) MCASP0_ACLKx.gpio3[14] */
+ AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ /* (D16) uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE7)
+ /* (D15) uart1_txd.uart1_txd */
+ AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE7)
+ /*SWITCH-OFF_3V6*/
+ /* (M18) gpio0[1] */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ /* MIRACULIX */
+ /* (H17) gmii1_crs.gpio3[1] */
+ AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+ /* (H18) rmii1_refclk.gpio0[29] */
+ AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+ /* (J18) gmii1_txd3.gpio0[16] */
+ AM33XX_IOPAD(0x91c, PIN_INPUT | MUX_MODE7 )
+ /* (J17) gmii1_rxdv.gpio3[4] */
+ AM33XX_IOPAD(0x918, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+ >;
+ };
+
+ guardian_beeper_pins: dmtimer7-pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) /* (E18) timer7 */
+ >;
+ };
+
+ guardian_button_pins: guardian-button-pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */
+ AM33XX_IOPAD(0x884, PIN_INPUT | MUX_MODE7) /* (V9) gpmc_csn2.gpio1[31] */
+ >;
+ };
+
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ led_bl_pins: gpio-led-bl-pins {
+ pinctrl-single,pins = <
+ /* P9_14, gpmc_a[2].GPIO1[18] (backlight control) */
+ AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
+ >;
+ };
+
+ lcd_disen_pins: lcd-disen-pins {
+ pinctrl-single,pins = <
+ /* P9_27, mcasp0_fsr.gpio3[19] (lcd_disen) */
+ AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
+ >;
+ };
+
+ lcd_pins_default: lcd-default-pins {
+ pinctrl-single,pins = <
+ /* (U10) gpmc_ad8.lcd_data23 */
+ AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (T10) gpmc_ad9.lcd_data22 */
+ AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (T11) gpmc_ad10.lcd_data21 */
+ AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (U12) gpmc_ad11.lcd_data20 */
+ AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (T12) gpmc_ad12.lcd_data19 */
+ AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (R12) gpmc_ad13.lcd_data18 */
+ AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (V13) gpmc_ad14.lcd_data17 */
+ AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (U13) gpmc_ad15.lcd_data16 */
+ AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ >;
+ };
+
+ lcd_pins_sleep: lcd-sleep-pins {
+ pinctrl-single,pins = <
+ /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+ >;
+ };
+
+ guardian_led_pins: guardian-led-pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) /* (T16) gpmc_a10.gpio1[26] */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
+ >;
+ };
+
+ spi0_pins: spi0-pins {
+ pinctrl-single,pins = <
+ /* SPI0_CLK - spi0_clk.spi */
+ AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ /* SPI0_MOSI - spi0_d0.spi0 */
+ AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ /* SPI0_MISO - spi0_d1.spi0 */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* SPI0_CS0 - spi */
+ AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ /* K18 uart2_rxd.mirx_txd */
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1)
+ /* L18 uart2_txd.mirx_rxd */
+ AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1)
+ >;
+ };
+
+ nandflash_pins: nandflash-pins {
+ pinctrl-single,pins = <
+ /* (U7) gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0)
+ /* (V7) gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0)
+ /* (R8) gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0)
+ /* (T8) gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0)
+ /* (U8) gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0)
+ /* (V8) gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0)
+ /* (R9) gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0)
+ /* (T9) gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0)
+ /* (T17) gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0)
+ /* (U17) gpmc_wpn.gpmc_wpn */
+ AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0)
+ /* (V6) gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
+ /* (R7) gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
+ /* (T7) gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
+ /* (U6) gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
+ /* (T6) gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/am335x-icev2.dts b/src/arm/ti/omap/am335x-icev2.dts
new file mode 100644
index 0000000..3c42289
--- /dev/null
+++ b/src/arm/ti/omap/am335x-icev2.dts
@@ -0,0 +1,518 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * AM335x ICE V2 board
+ * http://www.ti.com/tool/tmdsice3359
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+ model = "TI AM3359 ICE-V2";
+ compatible = "ti,am3359-icev2", "ti,am33xx";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ vbat: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ vtt_fixed: fixedregulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vtt";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ };
+
+ leds-iio {
+ status = "disabled";
+ compatible = "gpio-leds";
+ led-out0 {
+ label = "out0";
+ gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out1 {
+ label = "out1";
+ gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out2 {
+ label = "out2";
+ gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out3 {
+ label = "out3";
+ gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out4 {
+ label = "out4";
+ gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out5 {
+ label = "out5";
+ gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out6 {
+ label = "out6";
+ gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out7 {
+ label = "out7";
+ gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ /* Tricolor status LEDs */
+ leds1 {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds>;
+
+ led0 {
+ label = "status0:red:cpu0";
+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "cpu0";
+ };
+
+ led1 {
+ label = "status0:green:usr";
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "status0:yellow:usr";
+ gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "status1:red:mmc0";
+ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc0";
+ };
+
+ led4 {
+ label = "status1:green:usr";
+ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led5 {
+ label = "status1:yellow:usr";
+ gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+ gpio-decoder {
+ compatible = "gpio-decoder";
+ gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
+ <&pca9536 2 GPIO_ACTIVE_HIGH>,
+ <&pca9536 1 GPIO_ACTIVE_HIGH>,
+ <&pca9536 0 GPIO_ACTIVE_HIGH>;
+ linux,axis = <0>; /* ABS_X */
+ decoder-max-value = <9>;
+ };
+};
+
+&am33xx_pinmux {
+ user_leds: user-leds-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT, MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT, MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT, MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */
+ >;
+ };
+
+ mmc0_pins_default: mmc0-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ i2c0_pins_default: i2c0-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
+ >;
+ };
+
+ spi0_pins_default: spi0-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */
+ >;
+ };
+
+ uart3_pins_default: uart3-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLUP, MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1, RMII mode */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txen.rmii1_txen */
+ /* Slave 2, RMII mode */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_wait0.rmii2_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_col.rmii2_refclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a11.rmii2_rxd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a10.rmii2_rxd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_wpn.rmii2_rxerr */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* gpmc_a5.rmii2_txd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* gpmc_a4.rmii2_txd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* gpmc_a0.rmii2_txen */
+ >;
+ };
+
+ cpsw_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+
+ /* Slave 2 reset value */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci-mdio-sleep-pins {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_default>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: power-controller@2d {
+ reg = <0x2d>;
+ };
+
+ tpic2810: gpio@60 {
+ compatible = "ti,tpic2810";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca9536: gpio@41 {
+ compatible = "ti,pca9536";
+ reg = <0x41>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ /* osd9616p0899-10 */
+ display@3c {
+ compatible = "solomon,ssd1306fb-i2c";
+ reg = <0x3c>;
+ solomon,height = <16>;
+ solomon,width = <96>;
+ solomon,com-seq;
+ solomon,com-invdir;
+ solomon,page-offset = <0>;
+ solomon,prechargep1 = <2>;
+ solomon,prechargep2 = <13>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_default>;
+
+ sn65hvs882@1 {
+ compatible = "pisosr-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ load-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ spi-cpol;
+ };
+
+ spi_nor: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q64", "jedec,spi-nor";
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+ reg = <0>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "u-boot";
+ reg = <0x80000 0x100000>;
+ read-only;
+ };
+
+ partition@2 {
+ label = "u-boot-env";
+ reg = <0x180000 0x20000>;
+ read-only;
+ };
+
+ partition@3 {
+ label = "misc";
+ reg = <0x1A0000 0x660000>;
+ };
+ };
+
+};
+
+&tscadc {
+ status = "okay";
+ adc {
+ ti,adc-channels = <1 2 3 4 5 6 7>;
+ };
+};
+
+#include "../../tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1326000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmc_reg>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_default>;
+};
+
+&gpio0_target {
+ /* Do not idle the GPIO used for holding the VTT regulator */
+ ti,no-reset-on-init;
+ ti,no-idle-on-init;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_default>;
+ status = "okay";
+};
+
+&gpio3 {
+ pr1-mii-ctl-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PR1_MII_CTRL";
+ };
+
+ mux-mii-hog {
+ gpio-hog;
+ gpios = <10 GPIO_ACTIVE_HIGH>;
+ /* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
+ output-high;
+ line-name = "MUX_MII_CTL1";
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <2>;
+};
+
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <2>; /* PHY datasheet states 1uS min */
+
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy1: ethernet-phy@3 {
+ reg = <3>;
+ };
+};
+
+&pruss_tm {
+ status = "okay";
+};
+
+&rtc {
+ system-power-controller;
+};
diff --git a/src/arm/ti/omap/am335x-igep0033.dtsi b/src/arm/ti/omap/am335x-igep0033.dtsi
new file mode 100644
index 0000000..e85c33f
--- /dev/null
+++ b/src/arm/ti/omap/am335x-igep0033.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
+ *
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins>;
+
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "com:green:user";
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ vbat: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ vmmc: fixedregulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&am33xx_pinmux {
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ nandflash_pins: nandflash-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
+ >;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ leds_pins: leds-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a7.gpio1_23 */
+ >;
+ };
+};
+
+&mac_sw {
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <2>;
+};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins>;
+
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ nand-bus-width = <8>;
+ ti,nand-ecc-opt = "bch8";
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ti,elm-id = <&elm>;
+
+ /* MTD partition table */
+ partition@0 {
+ label = "SPL";
+ reg = <0x00000000 0x00080000>;
+ };
+
+ partition@1 {
+ label = "U-boot";
+ reg = <0x00080000 0x001e0000>;
+ };
+
+ partition@2 {
+ label = "U-Boot Env";
+ reg = <0x00260000 0x00020000>;
+ };
+
+ partition@3 {
+ label = "Kernel";
+ reg = <0x00280000 0x00500000>;
+ };
+
+ partition@4 {
+ label = "File System";
+ reg = <0x00780000 0x07880000>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+ };
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmc>;
+ bus-width = <4>;
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+#include "../../tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1312500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-always-on;
+ };
+ };
+};
+
diff --git a/src/arm/ti/omap/am335x-lxm.dts b/src/arm/ti/omap/am335x-lxm.dts
new file mode 100644
index 0000000..be27b5a
--- /dev/null
+++ b/src/arm/ti/omap/am335x-lxm.dts
@@ -0,0 +1,347 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 NovaTech LLC - https://www.novatechweb.com
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+ model = "NovaTech OrionLXm";
+ compatible = "novatech,am335x-lxm", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ /* Power supply provides a fixed 5V @2A */
+ vbat: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ /* Power supply provides a fixed 3.3V @3A */
+ vmmcsd_fixed: fixedregulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+};
+
+&am33xx_pinmux {
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_int */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii1_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii1_rxer */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* rmii1_txen */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* rmii1_td1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* rmii1_td0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii1_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii1_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+
+ /* Slave 2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_txen */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rxer */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_int */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii2_refclk */
+ >;
+ };
+
+ cpsw_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_int */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_rxer */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_txen */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_td1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_td0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_refclk */
+
+ /* Slave 2 reset value*/
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_txen */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_td1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_td0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_rxer */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_int */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_refclk */
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci-mdio-sleep-pins {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ emmc_pins: emmc-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ >;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ serial_config1: serial_config1@20 {
+ compatible = "nxp,pca9539";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ serial_config2: serial_config2@21 {
+ compatible = "nxp,pca9539";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ tps: tps@2d {
+ compatible = "ti,tps65910";
+ reg = <0x2d>;
+ };
+};
+
+/include/ "../../tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ /* vrtc - unused */
+
+ vio_reg: regulator@1 {
+ regulator-name = "vio_1v5,ddr";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ regulator-name = "vdd1,mpu";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ regulator-name = "vdd2_1v1,core";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdd3 - unused */
+
+ /* vdig1 - unused */
+
+ vdig2_reg: regulator@6 {
+ regulator-name = "vdig2_1v8,vdds_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vpll - unused */
+
+ vdac_reg: regulator@8 {
+ regulator-name = "vdac_1v8,vdds";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-name = "vaux1_1v8,usb";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-name = "vaux2_3v3,io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-name = "vaux33_3v3,usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-name = "vmmc_3v3,io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "host";
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <2>;
+};
+
+&cpsw_port2 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <3>;
+};
+
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+
+ ethphy0: ethernet-phy@5 {
+ reg = <5>;
+ };
+
+ ethphy1: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
diff --git a/src/arm/ti/omap/am335x-moxa-uc-2100-common.dtsi b/src/arm/ti/omap/am335x-moxa-uc-2100-common.dtsi
new file mode 100644
index 0000000..b8730aa
--- /dev/null
+++ b/src/arm/ti/omap/am335x-moxa-uc-2100-common.dtsi
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
+ *
+ * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
+ * Wes Huang (黃淵河) <wes.huang@moxa.com>
+ * Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
+ */
+
+#include "am33xx.dtsi"
+
+/ {
+ vbat: vbat-regulator {
+ compatible = "regulator-fixed";
+ };
+
+ /* Power supply provides a fixed 3.3V @3A */
+ vmmcsd_fixed: vmmcsd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ buttons: push_button {
+ compatible = "gpio-keys";
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ push_button_pins: push-button-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_23 */
+ >;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ mmc1_pins_default: mmc1-pins {
+ pinctrl-single,pins = <
+ /* eMMC */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad12.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad13.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad14.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad15.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad8.mmc1_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad9.mmc1_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad10.mmc1_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad11.mmc1_dat7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ >;
+ };
+
+ spi0_pins: spi0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+};
+
+&uart0 {
+ /* Console */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c16";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+
+ rtc_wdt: rtc_wdt@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+};
+
+&usb0 {
+ dr_mode = "host";
+};
+
+/* Power */
+&vbat {
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+};
+
+&mac_sw {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpsw_default>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default";
+ pinctrl-0 = <&davinci_mdio_default>;
+ status = "okay";
+};
+
+&cpsw_port1 {
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ ti,dual-emac-pvid = <2>;
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&gpio0_target {
+ ti,no-reset-on-init;
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ pinctrl-0 = <&mmc1_pins_default>;
+ non-removable;
+ status = "okay";
+};
+
+&buttons {
+ pinctrl-names = "default";
+ pinctrl-0 = <&push_button_pins>;
+
+ button-0 {
+ label = "push_button";
+ linux,code = <0x100>;
+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ };
+};
+
+/* SPI Busses */
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+
+ flash@0 {
+ compatible = "mx25l6405d";
+ spi-max-frequency = <40000000>;
+
+ reg = <0>;
+ spi-cpol;
+ spi-cpha;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* reg : The partition's offset and size within the mtd bank. */
+ partitions@0 {
+ label = "MLO";
+ reg = <0x0 0x80000>;
+ };
+
+ partitions@1 {
+ label = "U-Boot";
+ reg = <0x80000 0x100000>;
+ };
+
+ partitions@2 {
+ label = "U-Boot Env";
+ reg = <0x180000 0x40000>;
+ };
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+
+ tpm_spi_tis@0 {
+ compatible = "tcg,tpm_tis-spi";
+ reg = <0>;
+ spi-max-frequency = <500000>;
+ };
+};
diff --git a/src/arm/ti/omap/am335x-moxa-uc-2101.dts b/src/arm/ti/omap/am335x-moxa-uc-2101.dts
new file mode 100644
index 0000000..e986945
--- /dev/null
+++ b/src/arm/ti/omap/am335x-moxa-uc-2101.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
+ *
+ * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
+ * Wes Huang (黃淵河) <wes.huang@moxa.com>
+ * Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
+ */
+
+/dts-v1/;
+
+#include "am335x-moxa-uc-2100-common.dtsi"
+
+/ {
+ model = "Moxa UC-2101";
+ compatible = "moxa,uc-2101", "ti,am33xx";
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "UC2100:GREEN:USER";
+ gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txen.rmii1_txen */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ spi1_pins: spi1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4) /* ecap0_in_pwm0_out.spi1_sclk */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* uart1_ctsn.spi1_cs0 */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* uart0_ctsn.spi1_d0 */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* uart0_rtsn.spi1_d1 */
+ >;
+ };
+};
+
+&davinci_mdio_sw {
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <&phy0>;
+ phy-mode = "rmii";
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/am335x-moxa-uc-8100-common.dtsi b/src/arm/ti/omap/am335x-moxa-uc-8100-common.dtsi
new file mode 100644
index 0000000..daaa5ee
--- /dev/null
+++ b/src/arm/ti/omap/am335x-moxa-uc-8100-common.dtsi
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 MOXA Inc. - https://www.moxa.com/
+ *
+ * Author: Johnson Chen <johnsonch.chen@moxa.com>
+ */
+
+#include "am33xx.dtsi"
+
+/ {
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ vbat: vbat-regulator {
+ compatible = "regulator-fixed";
+ };
+
+ /* Power supply provides a fixed 3.3V @3A */
+ vmmcsd_fixed: vmmcsd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ buttons: push_button {
+ compatible = "gpio-keys";
+ };
+
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&minipcie_pins>;
+
+ minipcie_pins: minipcie-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2_24 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/
+ >;
+ };
+
+ push_button_pins: push-button-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */
+ >;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_ctsn.i2c1_sda */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_rtsn.i2c1_scl */
+ >;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6) /* lcd_data14.uart5_ctsn */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* lcd_data15.uart5_rtsn */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* lcd_data9.uart5_rxd */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE4) /* lcd_data8.uart5_txd */
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+
+ /* Slave 2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rxer */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_txen */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii2_refclk */
+
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ mmc0_pins_default: mmc0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2-pins {
+ pinctrl-single,pins = <
+ /* eMMC */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk */
+ >;
+ };
+
+ spi0_pins: spi0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+};
+
+&uart0 {
+ /* Console */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&uart1 {
+ /* UART 1 setting */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&uart5 {
+ /* UART 2 setting */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ compatible = "ti,tps65910";
+ reg = <0x2d>;
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c16";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+
+ rtc_wdt: rtc_wdt@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+ gpio_xten: gpio_xten@27 {
+ compatible = "nxp,pca9535";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x27>;
+ };
+};
+
+&usb0 {
+ dr_mode = "host";
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+
+#include "../../tps65910.dtsi"
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc_reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+/* Power */
+&vbat {
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+};
+
+&mac_sw {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpsw_default>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default";
+ pinctrl-0 = <&davinci_mdio_default>;
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ ethphy1: ethernet-phy@5 {
+ reg = <5>;
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <2>;
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&gpio0_target {
+ ti,no-reset-on-init;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ pinctrl-0 = <&mmc0_pins_default>;
+ cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&mmc3 {
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ pinctrl-0 = <&mmc2_pins_default>;
+ ti,non-removable;
+ status = "okay";
+};
+
+&buttons {
+ pinctrl-names = "default";
+ pinctrl-0 = <&push_button_pins>;
+
+ button-0 {
+ label = "push_button";
+ linux,code = <0x100>;
+ gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+ };
+};
+
+/* SPI Busses */
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+
+ flash@0 {
+ compatible = "mx25l6405d";
+ spi-max-frequency = <40000000>;
+
+ reg = <0>;
+ spi-cpol;
+ spi-cpha;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* reg : The partition's offset and size within the mtd bank. */
+ partitions@0 {
+ label = "MLO";
+ reg = <0x0 0x80000>;
+ };
+
+ partitions@1 {
+ label = "U-Boot";
+ reg = <0x80000 0x100000>;
+ };
+
+ partitions@2 {
+ label = "U-Boot Env";
+ reg = <0x180000 0x20000>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/am335x-moxa-uc-8100-me-t.dts b/src/arm/ti/omap/am335x-moxa-uc-8100-me-t.dts
new file mode 100644
index 0000000..0c7949d
--- /dev/null
+++ b/src/arm/ti/omap/am335x-moxa-uc-8100-me-t.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 MOXA Inc. - https://www.moxa.com/
+ *
+ * Author: SZ Lin (林上智) <sz.lin@moxa.com>
+ */
+/dts-v1/;
+
+#include "am335x-moxa-uc-8100-common.dtsi"
+
+/ {
+ model = "Moxa UC-8100-ME-T";
+ compatible = "moxa,uc-8100-me-t", "ti,am33xx";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "uc8100me:CEL1";
+ gpios = <&gpio_xten 8 0>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "uc8100me:CEL2";
+ gpios = <&gpio_xten 9 0>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "uc8100me:CEL3";
+ gpios = <&gpio_xten 10 0>;
+ default-state = "off";
+ };
+
+ led4 {
+ label = "uc8100me:DIA1";
+ gpios = <&gpio_xten 11 0>;
+ default-state = "off";
+ };
+ led5 {
+ label = "uc8100me:DIA2";
+ gpios = <&gpio_xten 12 0>;
+ default-state = "off";
+ };
+ led6 {
+ label = "uc8100me:DIA3";
+ gpios = <&gpio_xten 13 0>;
+ default-state = "off";
+ };
+ led7 {
+ label = "uc8100me:SD";
+ gpios = <&gpio_xten 14 0>;
+ default-state = "off";
+ };
+ led8 {
+ label = "uc8100me:USB";
+ gpios = <&gpio_xten 15 0>;
+ default-state = "off";
+ };
+ led9 {
+ label = "uc8100me:USER";
+ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+};
+
+&i2c0 {
+ tpm: tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ };
+};
+
+&tps {
+ regulators {
+ vdd1_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1378000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+};
+
diff --git a/src/arm/ti/omap/am335x-myirtech-myc.dtsi b/src/arm/ti/omap/am335x-myirtech-myc.dtsi
new file mode 100644
index 0000000..5845992
--- /dev/null
+++ b/src/arm/ti/omap/am335x-myirtech-myc.dtsi
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */
+
+/* Based on code by myc_c335x.dts, MYiRtech.com */
+/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "MYIR MYC-AM335X";
+ compatible = "myir,myc-am335x", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd_core>;
+ voltage-tolerance = <2>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+ clk32k: clk32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+
+ #clock-cells = <0>;
+ };
+
+ vdd_mod: vdd_mod_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-mod";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_core: vdd_core_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-core";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mod>;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_mod_pins>;
+
+ led_mod: led_mod {
+ label = "module:user";
+ gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ panic-indicator;
+ };
+ };
+};
+
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <ð_slave1_pins_default>;
+ pinctrl-1 = <ð_slave1_pins_sleep>;
+ status = "okay";
+};
+
+&cpsw_port1 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mdio_pins_default>;
+ pinctrl-1 = <&mdio_pins_sleep>;
+
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&nand_pins_default>;
+ pinctrl-1 = <&nand_pins_sleep>;
+ ranges = <0 0 0x8000000 0x1000000>;
+ status = "okay";
+
+ nand0: nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>;
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE_NONE>;
+ nand-bus-width = <8>;
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wait-pin = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ ti,elm-id = <&elm>;
+ ti,nand-ecc-opt = "bch8";
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default", "gpio", "sleep";
+ pinctrl-0 = <&i2c0_pins_default>;
+ pinctrl-1 = <&i2c0_pins_gpio>;
+ pinctrl-2 = <&i2c0_pins_sleep>;
+ clock-frequency = <400000>;
+ scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ pagesize = <32>;
+ vcc-supply = <&vdd_mod>;
+ };
+};
+
+&rtc {
+ clocks = <&clk32k>;
+ clock-names = "ext-clk";
+ system-power-controller;
+};
+
+&am33xx_pinmux {
+ mdio_pins_default: mdio-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) /* mdio_data */
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) /* mdio_clk */
+ >;
+ };
+
+ mdio_pins_sleep: mdio-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ eth_slave1_pins_default: eth-slave1-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_tctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_td3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_td2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_td1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_td0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_tclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rd0 */
+ >;
+ };
+
+ eth_slave1_pins_sleep: eth-slave1-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ i2c0_pins_default: i2c0-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE0) /* I2C0_SDA */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE0) /* I2C0_SCL */
+ >;
+ };
+
+ i2c0_pins_gpio: i2c0-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE7) /* gpio3[5] */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE7) /* gpio3[6] */
+ >;
+ };
+
+ i2c0_pins_sleep: i2c0-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ led_mod_pins: led-mod-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpio3[18] */
+ >;
+ };
+
+ nand_pins_default: nand-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_wait0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpio0[31] */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) /* gpmc_csn0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) /* gpmc_advn_ale */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) /* gpmc_oen_ren */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) /* gpmc_wen */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) /* gpmc_be0n_cle */
+ >;
+ };
+
+ nand_pins_sleep: nand-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/am335x-myirtech-myd.dts b/src/arm/ti/omap/am335x-myirtech-myd.dts
new file mode 100644
index 0000000..d3bba79
--- /dev/null
+++ b/src/arm/ti/omap/am335x-myirtech-myd.dts
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */
+/* Based on code by myd_c335x.dts, MYiRtech.com */
+/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */
+
+/dts-v1/;
+
+#include "am335x-myirtech-myc.dtsi"
+
+#include <dt-bindings/display/tda998x.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "MYIR MYD-AM335X";
+ compatible = "myir,myd-am335x", "myir,myc-am335x", "ti,am33xx";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ clk12m: clk12m {
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+
+ #clock-cells = <0>;
+ };
+
+ gpio_buttons: gpio_buttons {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_buttons_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button1: button@0 {
+ reg = <0>;
+ label = "button1";
+ linux,code = <BTN_1>;
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ button2: button@1 {
+ reg = <1>;
+ label = "button2";
+ linux,code = <BTN_2>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ sound: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&master_codec>;
+ simple-audio-card,frame-master = <&master_codec>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp0>;
+ };
+
+ master_codec: simple-audio-card,codec@1 {
+ sound-dai = <&sgtl5000>;
+ };
+
+ simple-audio-card,codec@2 {
+ sound-dai = <&tda9988>;
+ };
+ };
+
+ vdd_5v0: vdd_5v0_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_3v3: vdd_3v3_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_5v0>;
+ };
+};
+
+&cpsw_port2 {
+ status = "okay";
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+ phy1: ethernet-phy@6 {
+ reg = <6>;
+ eee-broken-1000t;
+ };
+};
+
+&mac_sw {
+ pinctrl-0 = <ð_slave1_pins_default>, <ð_slave2_pins_default>;
+ pinctrl-1 = <ð_slave1_pins_sleep>, <ð_slave2_pins_sleep>;
+ slaves = <2>;
+};
+
+&dcan0 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&dcan0_pins_default>;
+ pinctrl-1 = <&dcan0_pins_sleep>;
+ status = "okay";
+};
+
+&dcan1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&dcan1_pins_default>;
+ pinctrl-1 = <&dcan1_pins_sleep>;
+ status = "okay";
+};
+
+&ehrpwm0 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&ehrpwm0_pins_default>;
+ pinctrl-1 = <&ehrpwm0_pins_sleep>;
+ status = "okay";
+};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default", "gpio", "sleep";
+ pinctrl-0 = <&i2c1_pins_default>;
+ pinctrl-1 = <&i2c1_pins_gpio>;
+ pinctrl-2 = <&i2c1_pins_sleep>;
+ clock-frequency = <400000>;
+ scl-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ sgtl5000: sgtl5000@a {
+ compatible = "fsl,sgtl5000";
+ reg =<0xa>;
+ clocks = <&clk12m>;
+ micbias-resistor-k-ohms = <4>;
+ micbias-voltage-m-volts = <2250>;
+ VDDA-supply = <&vdd_3v3>;
+ VDDIO-supply = <&vdd_3v3>;
+
+ #sound-dai-cells = <0>;
+ };
+
+ tda9988: tda9988@70 {
+ compatible = "nxp,tda998x";
+ reg =<0x70>;
+ audio-ports = <TDA998x_I2S 1>;
+
+ #sound-dai-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_0: endpoint {
+ remote-endpoint = <&lcdc_0>;
+ };
+ };
+ };
+ };
+};
+
+&lcdc {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&lcdc_pins_default>;
+ pinctrl-1 = <&lcdc_pins_sleep>;
+ blue-and-red-wiring = "straight";
+ status = "okay";
+
+ port {
+ lcdc_0: endpoint@0 {
+ remote-endpoint = <&hdmi_0>;
+ };
+ };
+};
+
+&leds {
+ pinctrl-0 = <&led_mod_pins &leds_pins>;
+
+ led1: led1 {
+ label = "base:user1";
+ gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ };
+
+ led2: led2 {
+ label = "base:user2";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ };
+};
+
+&mcasp0 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp0_pins_default>;
+ pinctrl-1 = <&mcasp0_pins_sleep>;
+ op-mode = <0>;
+ tdm-slots = <2>;
+ serial-dir = <0 1 2 0>;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+ status = "okay";
+
+ #sound-dai-cells = <0>;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_sleep>;
+ cd-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_3v3>;
+ status = "okay";
+};
+
+&nand0 {
+ nand_parts: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "MLO";
+ reg = <0x00000 0x20000>;
+ };
+
+ partition@80000 {
+ label = "boot";
+ reg = <0x80000 0x100000>;
+ };
+ };
+};
+
+&tscadc {
+ status = "okay";
+
+ adc: adc {
+ ti,adc-channels = <0 1 2 3 4 5 6>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart1_pins_default>;
+ pinctrl-1 = <&uart1_pins_sleep>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart2_pins_default>;
+ pinctrl-1 = <&uart2_pins_sleep>;
+ status = "okay";
+};
+
+&usb {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_pins>;
+};
+
+&usb0 {
+ dr_mode = "otg";
+};
+
+&usb0_phy {
+ vcc-supply = <&vdd_5v0>;
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&usb1_phy {
+ vcc-supply = <&vdd_5v0>;
+};
+
+&vdd_mod {
+ vin-supply = <&vdd_3v3>;
+};
+
+&am33xx_pinmux {
+ dcan0_pins_default: dcan0-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2) /* dcan0_tx_mux2 */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT, MUX_MODE2) /* dcan0_rx_mux2 */
+ >;
+ };
+
+ dcan0_pins_sleep: dcan0-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ dcan1_pins_default: dcan1-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* dcan1_tx_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* dcan1_rx_mux0 */
+ >;
+ };
+
+ dcan1_pins_sleep: dcan1-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ ehrpwm0_pins_default: ehrpwm0-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_OUTPUT, MUX_MODE3) /* ehrpwm0A_mux1 */
+ >;
+ };
+
+ ehrpwm0_pins_sleep: ehrpwm0-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ eth_slave2_pins_default: eth-slave2-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_tctl */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rctl */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_tclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2 /* rgmii2_rd1 */)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2 /* rgmii2_rd0 */)
+ >;
+ };
+
+ eth_slave2_pins_sleep: eth-slave2-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ gpio_buttons_pins: gpio-buttons-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpio3[0] */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT, MUX_MODE7) /* gpio0[29] */
+ >;
+ };
+
+ i2c1_pins_default: i2c1-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2) /* I2C1_SDA_mux3 */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2) /* I2C1_SCL_mux3 */
+ >;
+ };
+
+ i2c1_pins_gpio: i2c1-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE7) /* gpio0[4] */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE7) /* gpio0[5] */
+ >;
+ };
+
+ i2c1_pins_sleep: i2c1-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ lcdc_pins_default: lcdc-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) /* lcd_data0 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) /* lcd_data1 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) /* lcd_data2 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) /* lcd_data3 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) /* lcd_data4 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) /* lcd_data5 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) /* lcd_data6 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) /* lcd_data7 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) /* lcd_data8 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) /* lcd_data9 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) /* lcd_data10 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) /* lcd_data11 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) /* lcd_data12 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) /* lcd_data13 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) /* lcd_data14 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) /* lcd_data15 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) /* lcd_vsync */
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) /* lcd_hsync */
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) /* lcd_pclk */
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) /* lcd_ac_bias_en */
+ >;
+ };
+
+ lcdc_pins_sleep: lcdc-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ leds_pins: leds-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* gpio0[27] */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE7) /* gpio0[3] */
+ >;
+ };
+
+ mcasp0_pins_default: mcasp0-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_aclkx_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_fsx_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mcasp0_axr2_mux0 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_axr1_mux0 */
+ >;
+ };
+
+ mcasp0_pins_sleep: mcasp0-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins_default: mmc1-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_clk */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_cmd */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* gpio3[21] */
+ >;
+ };
+
+ mmc1_pins_sleep: mmc1-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) /* uart0_rxd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* uart0_txd */
+ >;
+ };
+
+ uart1_pins_default: uart1-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) /* uart1_rxd */
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* uart1_txd */
+ >;
+ };
+
+ uart1_pins_sleep: uart1-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ uart2_pins_default: uart2-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT, MUX_MODE6) /* uart2_rxd_mux1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_OUTPUT, MUX_MODE6) /* uart2_txd_mux1 */
+ >;
+ };
+
+ uart2_pins_sleep: uart2-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ usb_pins: usb-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_USB0_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* USB0_DRVVBUS */
+ AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* USB1_DRVVBUS */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/am335x-nano.dts b/src/arm/ti/omap/am335x-nano.dts
new file mode 100644
index 0000000..a475c0d
--- /dev/null
+++ b/src/arm/ti/omap/am335x-nano.dts
@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+ model = "Newflow AM335x NanoBone";
+ compatible = "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "nanobone:green:usr1";
+ gpios = <&gpio1 5 0>;
+ default-state = "off";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&misc_pins>;
+
+ misc_pins: misc-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE7) /* spi0_cs0.gpio0_5 */
+ >;
+ };
+
+ gpmc_pins: gpmc-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE0)
+
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT, MUX_MODE0)
+
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
+
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE1) /* lcd_data1.gpmc_a1 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE1) /* lcd_data2.gpmc_a2 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE1) /* lcd_data3.gpmc_a3 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE1) /* lcd_data4.gpmc_a4 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE1) /* lcd_data5.gpmc_a5 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE1) /* lcd_data6.gpmc_a6 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE1) /* lcd_data7.gpmc_a7 */
+
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE1) /* lcd_vsync.gpmc_a8 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE1) /* lcd_hsync.gpmc_a9 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE1) /* lcd_pclk.gpmc_a10 */
+ >;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT, MUX_MODE0)
+ >;
+ };
+
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_INPUT_PULLUP, MUX_MODE7) /* lcd_data8.gpio2[14] */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE7) /* lcd_data9.gpio2[15] */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_INPUT_PULLUP, MUX_MODE7) /* lcd_data10.gpio2[16] */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE7) /* lcd_data11.gpio2[17] */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE1) /* spi0_cs1.uart3_rxd */
+ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT, MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */
+ >;
+ };
+
+ uart4_pins: uart4-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT_PULLUP, MUX_MODE7) /* lcd_data12.gpio0[8] */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE7) /* lcd_data13.gpio0[9] */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE1) /* uart0_ctsn.uart4_rxd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE1) /* uart0_rtsn.uart4_txd */
+ >;
+ };
+
+ uart5_pins: uart5-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE4) /* lcd_data14.uart5_rxd */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT, MUX_MODE3) /* rmiii1_refclk.uart5_txd */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLUP, MUX_MODE7) /* emu1.gpio3[8] */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+ rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ rs485-rts-active-high;
+ rs485-rx-during-tx;
+ rs485-rts-delay = <1 1>;
+ linux,rs485-enabled-at-boot-time;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+ rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+ rs485-rts-active-high;
+ rs485-rts-delay = <1 1>;
+ linux,rs485-enabled-at-boot-time;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ rts-gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+ rs485-rts-active-high;
+ rs485-rx-during-tx;
+ rs485-rts-delay = <1 1>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ rts-gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ rs485-rts-active-high;
+ rs485-rx-during-tx;
+ rs485-rts-delay = <1 1>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_pins>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ gpio@20 {
+ compatible = "microchip,mcp23017";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "lm75";
+ reg = <0x48>;
+ };
+
+ eeprom@53 {
+ compatible = "microchip,24c02", "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <8>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1307";
+ reg = <0x68>;
+ };
+};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ compatible = "ti,am3352-gpmc";
+ status = "okay";
+ gpmc,num-waitpins = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmc_pins>;
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x08000000 0x08000000>, /* CS0: NOR 128M */
+ <1 0 0x1c000000 0x01000000>; /* CS1: FRAM 16M */
+
+ nor@0,0 {
+ reg = <0 0x00000000 0x08000000>;
+ compatible = "cfi-flash";
+ linux,mtd-name = "spansion,s29gl010p11t";
+ bank-width = <2>;
+
+ gpmc,mux-add-data = <2>;
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <160>;
+ gpmc,cs-wr-off-ns = <160>;
+ gpmc,adv-on-ns = <10>;
+ gpmc,adv-rd-off-ns = <30>;
+ gpmc,adv-wr-off-ns = <30>;
+ gpmc,oe-on-ns = <40>;
+ gpmc,oe-off-ns = <160>;
+ gpmc,we-on-ns = <40>;
+ gpmc,we-off-ns = <160>;
+ gpmc,rd-cycle-ns = <160>;
+ gpmc,wr-cycle-ns = <160>;
+ gpmc,access-ns = <150>;
+ gpmc,page-burst-access-ns = <10>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-delay-ns = <20>;
+ gpmc,wr-data-mux-bus-ns = <70>;
+ gpmc,wr-access-ns = <80>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ MTD partition table
+ ===================
+ +------------+-->0x00000000-> U-Boot start
+ | |
+ | |-->0x000BFFFF-> U-Boot end
+ | |-->0x000C0000-> ENV1 start
+ | |
+ | |-->0x000DFFFF-> ENV1 end
+ | |-->0x000E0000-> ENV2 start
+ | |
+ | |-->0x000FFFFF-> ENV2 end
+ | |-->0x00100000-> Kernel start
+ | |
+ | |-->0x004FFFFF-> Kernel end
+ | |-->0x00500000-> File system start
+ | |
+ | |-->0x01FFFFFF-> File system end
+ | |-->0x02000000-> User data start
+ | |
+ | |-->0x03FFFFFF-> User data end
+ | |-->0x04000000-> Data storage start
+ | |
+ +------------+-->0x08000000-> NOR end (Free end)
+ */
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000c0000>; /* 768KB */
+ };
+
+ partition@1 {
+ label = "env1";
+ reg = <0x000c0000 0x00020000>; /* 128KB */
+ };
+
+ partition@2 {
+ label = "env2";
+ reg = <0x000e0000 0x00020000>; /* 128KB */
+ };
+
+ partition@3 {
+ label = "kernel";
+ reg = <0x00100000 0x00400000>; /* 4MB */
+ };
+
+ partition@4 {
+ label = "rootfs";
+ reg = <0x00500000 0x01b00000>; /* 27MB */
+ };
+
+ partition@5 {
+ label = "user";
+ reg = <0x02000000 0x02000000>; /* 32MB */
+ };
+
+ partition@6 {
+ label = "data";
+ reg = <0x04000000 0x04000000>; /* 64MB */
+ };
+ };
+
+ fram@1,0 {
+ reg = <1 0x00000000 0x01000000>;
+ bank-width = <2>;
+
+ gpmc,mux-add-data = <2>;
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <160>;
+ gpmc,cs-wr-off-ns = <160>;
+ gpmc,adv-on-ns = <10>;
+ gpmc,adv-rd-off-ns = <20>;
+ gpmc,adv-wr-off-ns = <20>;
+ gpmc,oe-on-ns = <30>;
+ gpmc,oe-off-ns = <150>;
+ gpmc,we-on-ns = <30>;
+ gpmc,we-off-ns = <150>;
+ gpmc,rd-cycle-ns = <160>;
+ gpmc,wr-cycle-ns = <160>;
+ gpmc,access-ns = <130>;
+ gpmc,page-burst-access-ns = <10>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+ gpmc,cycle2cycle-delay-ns = <10>;
+ gpmc,wr-data-mux-bus-ns = <30>;
+ gpmc,wr-access-ns = <0>;
+ };
+};
+
+&mac_sw {
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "mii";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <ðphy1>;
+ phy-mode = "mii";
+ ti,dual-emac-pvid = <2>;
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&ldo4_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ bus-width = <4>;
+ cd-debounce-delay-ms = <5>;
+ cd-gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb0 {
+ dr_mode = "host";
+};
+
+#include "../../tps65217.dtsi"
+
+&tps {
+ regulators {
+ dcdc1_reg: regulator@0 {
+ /* +1.5V voltage with ±4% tolerance */
+ regulator-min-microvolt = <1450000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <915000>;
+ regulator-max-microvolt = <1140000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <915000>;
+ regulator-max-microvolt = <1140000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ /* +1.8V voltage with ±4% tolerance */
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <1870000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ /* +3.3V voltage with ±4% tolerance */
+ regulator-min-microvolt = <3175000>;
+ regulator-max-microvolt = <3430000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ /* +1.8V voltage with ±4% tolerance */
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <1870000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ /* +3.3V voltage with ±4% tolerance */
+ regulator-min-microvolt = <3175000>;
+ regulator-max-microvolt = <3430000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/am335x-netcan-plus-1xx.dts b/src/arm/ti/omap/am335x-netcan-plus-1xx.dts
new file mode 100644
index 0000000..f7fad48
--- /dev/null
+++ b/src/arm/ti/omap/am335x-netcan-plus-1xx.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+ model = "NetCAN";
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
+ compatible = "gpio-leds";
+
+ led@1 {
+ label = "can_data";
+ linux,default-trigger = "netdev";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ led@2 {
+ label = "can_error";
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ user_leds_s0: user-leds-s0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* CAN Data LED */
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* CAN Error LED */
+ >;
+ };
+
+ dcan1_pins: dcan1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* CAN TX */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* CAN RX */
+ >;
+ };
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&davinci_mdio_sw {
+ phy0: ethernet-phy@0 {
+ reg = <1>;
+ };
+};
+
+&cpsw_port1 {
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <1>;
+ phy-handle = <&phy0>;
+};
+
+&cpsw_port2 {
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <2>;
+ phy-handle = <&phy1>;
+};
+
+&dcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins>;
+
+ status = "okay";
+};
+
+&gpio0 {
+ gpio-line-names =
+ "MDIO",
+ "MDC",
+ "NC",
+ "NC",
+ "I2C1_SDA",
+ "I2C1_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "can_data",
+ "can_error",
+ "onrisc:blue:wlan",
+ "onrisc:green:app",
+ "USB0_DRVVBUS",
+ "ETH2_INT",
+ "NC",
+ "NC",
+ "MMC1_DAT0",
+ "MMC1_DAT1",
+ "NC",
+ "NC",
+ "MMC1_DAT2",
+ "MMC1_DAT3",
+ "NC",
+ "NC",
+ "GPMC_WAIT0",
+ "GPMC_WP_N";
+};
+
+&gpio1 {
+ gpio-line-names =
+ "GPMC_AD0",
+ "GPMC_AD1",
+ "GPMC_AD2",
+ "GPMC_AD3",
+ "GPMC_AD4",
+ "GPMC_AD5",
+ "GPMC_AD6",
+ "GPMC_AD7",
+ "DCAN1_TX",
+ "DCAN1_RX",
+ "CONSOLE_RX",
+ "CONSOLE_TX",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "RGMII2_TCTL",
+ "RGMII2_RCTL",
+ "RGMII2_TD3",
+ "RGMII2_TD2",
+ "RGMII2_TD1",
+ "RGMII2_TD0",
+ "RGMII2_TCLK",
+ "RGMII2_RCLK",
+ "RGMII2_RD3",
+ "RGMII2_RD2",
+ "RGMII2_RD1",
+ "RGMII2_RD0",
+ "PMIC_INT1",
+ "GPMC_CSN0_Flash",
+ "MMC1_CLK",
+ "MMC1_CMD";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "GPMC_CSN3_BUS",
+ "GPMC_CLK",
+ "GPMC_ADVN_ALE",
+ "GPMC_OEN_RE_N",
+ "GPMC_WE_N",
+ "GPMC_BEN0_CLE",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "SW2_0",
+ "SW2_1",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "MMC0_DAT3",
+ "MMC0_DAT2",
+ "MMC0_DAT1",
+ "MMC0_DAT0",
+ "MMC0_CLK",
+ "MMC0_CMD";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "onrisc:red:power",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "WLAN_IRQ",
+ "WLAN_EN",
+ "SW2_2",
+ "SW2_3",
+ "NC",
+ "NC",
+ "NC",
+ "ModeA0",
+ "ModeA1",
+ "ModeA2",
+ "ModeA3",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC";
+};
diff --git a/src/arm/ti/omap/am335x-netcom-plus-2xx.dts b/src/arm/ti/omap/am335x-netcom-plus-2xx.dts
new file mode 100644
index 0000000..76751a3
--- /dev/null
+++ b/src/arm/ti/omap/am335x-netcom-plus-2xx.dts
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+ model = "NetCom Plus";
+};
+
+&am33xx_pinmux {
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) /* RX */
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) /* TX */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) /* CTS */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* RTS */
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* RX */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* TX */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* CTS */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* RTS */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */
+ >;
+ };
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ phy0: ethernet-phy@0 {
+ reg = <1>;
+ };
+};
+
+&cpsw_port1 {
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <1>;
+ phy-handle = <&phy0>;
+};
+
+&cpsw_port2 {
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <2>;
+ phy-handle = <&phy1>;
+};
+
+&gpio0 {
+ gpio-line-names =
+ "MDIO",
+ "MDC",
+ "UART2_RX",
+ "UART2_TX",
+ "I2C1_SDA",
+ "I2C1_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "UART1_CTSN",
+ "UART1_RTSN",
+ "UART1_RX",
+ "UART1_TX",
+ "onrisc:blue:wlan",
+ "onrisc:green:app",
+ "USB0_DRVVBUS",
+ "ETH2_INT",
+ "NC",
+ "NC",
+ "MMC1_DAT0",
+ "MMC1_DAT1",
+ "NC",
+ "NC",
+ "MMC1_DAT2",
+ "MMC1_DAT3",
+ "NC",
+ "NC",
+ "GPMC_WAIT0",
+ "GPMC_WP_N";
+};
+
+&gpio1 {
+ gpio-line-names =
+ "GPMC_AD0",
+ "GPMC_AD1",
+ "GPMC_AD2",
+ "GPMC_AD3",
+ "GPMC_AD4",
+ "GPMC_AD5",
+ "GPMC_AD6",
+ "GPMC_AD7",
+ "NC",
+ "NC",
+ "CONSOLE_RX",
+ "CONSOLE_TX",
+ "UART2_DTR",
+ "UART2_DSR",
+ "UART2_DCD",
+ "UART2_RI",
+ "RGMII2_TCTL",
+ "RGMII2_RCTL",
+ "RGMII2_TD3",
+ "RGMII2_TD2",
+ "RGMII2_TD1",
+ "RGMII2_TD0",
+ "RGMII2_TCLK",
+ "RGMII2_RCLK",
+ "RGMII2_RD3",
+ "RGMII2_RD2",
+ "RGMII2_RD1",
+ "RGMII2_RD0",
+ "PMIC_INT1",
+ "GPMC_CSN0_Flash",
+ "MMC1_CLK",
+ "MMC1_CMD";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "GPMC_CSN3_BUS",
+ "GPMC_CLK",
+ "GPMC_ADVN_ALE",
+ "GPMC_OEN_RE_N",
+ "GPMC_WE_N",
+ "GPMC_BEN0_CLE",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "SW2_0",
+ "SW2_1",
+ "NC",
+ "NC",
+ "UART1_DTR",
+ "UART1_DSR",
+ "UART1_DCD",
+ "UART1_RI",
+ "MMC0_DAT3",
+ "MMC0_DAT2",
+ "MMC0_DAT1",
+ "MMC0_DAT0",
+ "MMC0_CLK",
+ "MMC0_CMD";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "onrisc:red:power",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "UART2_CTSN",
+ "UART2_RTSN",
+ "WLAN_IRQ",
+ "WLAN_EN",
+ "SW2_2",
+ "SW2_3",
+ "NC",
+ "NC",
+ "NC",
+ "ModeA0",
+ "ModeA1",
+ "ModeA2",
+ "ModeA3",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC";
+};
diff --git a/src/arm/ti/omap/am335x-netcom-plus-8xx.dts b/src/arm/ti/omap/am335x-netcom-plus-8xx.dts
new file mode 100644
index 0000000..5a9fcec
--- /dev/null
+++ b/src/arm/ti/omap/am335x-netcom-plus-8xx.dts
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+
+/ {
+ model = "NetCom Plus";
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dip_switches>;
+
+ dip_switches: dip-switches-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ tca6416_pins: tca6416-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
+ >;
+ };
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&i2c1 {
+ tca6416a: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tca6416_pins>;
+ gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+ "GP_IN4", "GP_IN5", "GP_IN6", "GP_IN7",
+ "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+ "GP_OUT4", "GP_OUT5", "GP_OUT6", "GP_OUT7";
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tca6416b: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "CH1_M0", "CH1_M1", "CH1_M2", "CH1_M3",
+ "CH2_M0", "CH2_M1", "CH2_M2", "CH2_M3",
+ "CH3_M0", "CH3_M1", "CH3_M2", "CH3_M3",
+ "CH4_M0", "CH4_M1", "CH4_M2", "CH4_M3";
+ };
+
+ tca6416c: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "CH5_M0", "CH5_M1", "CH5_M2", "CH5_M3",
+ "CH6_M0", "CH6_M1", "CH6_M2", "CH6_M3",
+ "CH7_M0", "CH7_M1", "CH7_M2", "CH7_M3",
+ "CH8_M0", "CH8_M1", "CH8_M2", "CH8_M3";
+ };
+};
+
+&davinci_mdio_sw {
+ phy0: ethernet-phy@0 {
+ reg = <1>;
+ };
+};
+
+&cpsw_port1 {
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <1>;
+ phy-handle = <&phy0>;
+};
+
+&cpsw_port2 {
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <2>;
+ phy-handle = <&phy1>;
+};
+
+&gpio0 {
+ gpio-line-names =
+ "MDIO",
+ "MDC",
+ "NC",
+ "NC",
+ "I2C1_SDA",
+ "I2C1_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "I2C2_SDA",
+ "I2C2_SCL",
+ "NC",
+ "NC",
+ "onrisc:blue:wlan",
+ "onrisc:green:app",
+ "USB0_DRVVBUS",
+ "ETH2_INT",
+ "NC",
+ "NC",
+ "MMC1_DAT0",
+ "MMC1_DAT1",
+ "NC",
+ "NC",
+ "MMC1_DAT2",
+ "MMC1_DAT3",
+ "NC",
+ "NC",
+ "GPMC_WAIT0",
+ "GPMC_WP_N";
+};
+
+&gpio1 {
+ gpio-line-names =
+ "GPMC_AD0",
+ "GPMC_AD1",
+ "GPMC_AD2",
+ "GPMC_AD3",
+ "GPMC_AD4",
+ "GPMC_AD5",
+ "GPMC_AD6",
+ "GPMC_AD7",
+ "NC",
+ "NC",
+ "CONSOLE_RX",
+ "CONSOLE_TX",
+ "SW2_0_alt",
+ "SW2_1_alt",
+ "SW2_2_alt",
+ "SW2_3_alt",
+ "RGMII2_TCTL",
+ "RGMII2_RCTL",
+ "RGMII2_TD3",
+ "RGMII2_TD2",
+ "RGMII2_TD1",
+ "RGMII2_TD0",
+ "RGMII2_TCLK",
+ "RGMII2_RCLK",
+ "RGMII2_RD3",
+ "RGMII2_RD2",
+ "RGMII2_RD1",
+ "RGMII2_RD0",
+ "PMIC_INT1",
+ "GPMC_CSN0_Flash",
+ "MMC1_CLK",
+ "MMC1_CMD";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "GPMC_CSN3_BUS",
+ "GPMC_CLK",
+ "GPMC_ADVN_ALE",
+ "GPMC_OEN_RE_N",
+ "GPMC_WE_N",
+ "GPMC_BEN0_CLE",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "SW2_0",
+ "SW2_1",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "MMC0_DAT3",
+ "MMC0_DAT2",
+ "MMC0_DAT1",
+ "MMC0_DAT0",
+ "MMC0_CLK",
+ "MMC0_CMD";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "onrisc:red:power",
+ "NC",
+ "NC",
+ "NC",
+ "3G_PWR_EN",
+ "NC",
+ "NC",
+ "WLAN_IRQ",
+ "WLAN_EN",
+ "SW2_2",
+ "SW2_3",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC";
+};
diff --git a/src/arm/ti/omap/am335x-osd3358-sm-red.dts b/src/arm/ti/omap/am335x-osd3358-sm-red.dts
new file mode 100644
index 0000000..d28d397
--- /dev/null
+++ b/src/arm/ti/omap/am335x-osd3358-sm-red.dts
@@ -0,0 +1,434 @@
+//SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2018 Octavo Systems LLC - https://www.octavosystems.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-osd335x-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include <dt-bindings/display/tda998x.h>
+
+/ {
+ model = "Octavo Systems OSD3358-SM-RED";
+ compatible = "oct,osd3358-sm-refdesign", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
+
+&mmc2 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&lcdc {
+ status = "okay";
+
+ /* If you want to get 24 bit RGB and 16 BGR mode instead of
+ * current 16 bit RGB and 24 BGR modes, set the propety
+ * below to "crossed" and uncomment the video-ports -property
+ * in tda19988 node.
+ * AM335x errata for wiring:
+ * https://www.ti.com/lit/er/sprz360i/sprz360i.pdf
+ */
+
+ blue-and-red-wiring = "straight";
+
+ port {
+ lcdc_0: endpoint {
+ remote-endpoint = <&hdmi_0>;
+ };
+ };
+};
+
+&i2c0 {
+ tda19988: hdmi-encoder@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+
+ pinctrl-names = "default", "off";
+ pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+ pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+
+ /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
+ /* video-ports = <0x234501>; */
+
+ #sound-dai-cells = <0>;
+ audio-ports = < TDA998x_I2S 0x03>;
+
+ port {
+ hdmi_0: endpoint {
+ remote-endpoint = <&lcdc_0>;
+ };
+ };
+ };
+
+ mpu9250: imu@68 {
+ compatible = "invensense,mpu6050";
+ reg = <0x68>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ax8975@c {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0c>;
+ };
+ };
+ /*invensense,int_config = <0x10>;
+ invensense,level_shifter = <0>;
+ invensense,orientation = [01 00 00 00 01 00 00 00 01];
+ invensense,sec_slave_type = <0>;
+ invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
+ };
+
+ bmp280: pressure@76 {
+ compatible = "bosch,bmp280";
+ reg = <0x76>;
+ };
+};
+
+&mcasp0 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp0_pins>;
+ status = "okay";
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 1 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+/ {
+ clk_mcasp0_fixed: clk-mcasp0-fixed {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24576000>;
+ };
+
+ clk_mcasp0: clk-mcasp0 {
+ #clock-cells = <0>;
+ compatible = "gpio-gate-clock";
+ clocks = <&clk_mcasp0_fixed>;
+ enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "TI BeagleBone Black";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink0_master>;
+ simple-audio-card,frame-master = <&dailink0_master>;
+
+ dailink0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp0>;
+ clocks = <&clk_mcasp0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tda19988>;
+ };
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
+ compatible = "gpio-leds";
+
+ led2 {
+ label = "beaglebone:green:usr0";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led3 {
+ label = "beaglebone:green:usr1";
+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led4 {
+ label = "beaglebone:green:usr2";
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+
+ led5 {
+ label = "beaglebone:green:usr3";
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+ };
+
+ vmmcsd_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&clkout2_pin>;
+
+ nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+ >;
+ };
+
+ mcasp0_pins: mcasp0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+ >;
+ };
+
+ flash_enable: flash-enable-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* rmii1_ref_clk.gpio0_29 */
+ >;
+ };
+
+ imu_interrupt: imu-interrupt-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_rx_er.gpio3_2 */
+ >;
+ };
+
+ ethernet_interrupt: ethernet-interrupt-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_col.gpio3_0 */
+ >;
+ };
+
+ user_leds_s0: user-leds-s0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a7.gpio1_23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ >;
+ };
+
+ i2c2_pins: pinmux-i2c2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_ctsn.i2c2_sda */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_rtsn.i2c2_scl */
+ >;
+ };
+
+ uart0_pins: pinmux-uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ clkout2_pin: pinmux-clkout2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ >;
+ };
+
+ cpsw_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci-mdio-sleep-pins {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins: pinmux-mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ emmc_pins: pinmux-emmc-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ >;
+ };
+};
+
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "peripheral";
+ interrupts-extended = <&intc 18 &tps 0>;
+ interrupt-names = "mc", "vbus";
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-txid";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&rtc {
+ system-power-controller;
+ clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+ clock-names = "ext-clk", "int-clk";
+};
diff --git a/src/arm/ti/omap/am335x-osd335x-common.dtsi b/src/arm/ti/omap/am335x-osd335x-common.dtsi
new file mode 100644
index 0000000..93a3af8
--- /dev/null
+++ b/src/arm/ti/omap/am335x-osd335x-common.dtsi
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+};
+
+&cpu0_opp_table {
+ /*
+ * Octavo Systems:
+ * The EFUSE_SMA register is not programmed for any of the AM335x wafers
+ * we get and we are not programming them during our production test.
+ * Therefore, from a DEVICE_ID revision point of view, the silicon looks
+ * like it is Revision 2.1. However, from an EFUSE_SMA point of view for
+ * the HW OPP table, the silicon looks like it is Revision 1.0 (ie the
+ * EFUSE_SMA register reads as all zeros).
+ */
+ opp-1000000000 {
+ /* OPP Nitro */
+ opp-supported-hw = <0x06 0x0100>;
+ };
+};
+
+&am33xx_pinmux {
+ i2c0_pins: pinmux-i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+};
+
+/include/ "../../tps65217.dtsi"
+
+&tps {
+ interrupts = <7>; /* NMI */
+ interrupt-parent = <&intc>;
+
+ ti,pmic-shutdown-controller;
+
+ pwrbutton {
+ interrupts = <2>;
+ status = "okay";
+ };
+
+ regulators {
+ dcdc1_reg: regulator@0 {
+ regulator-name = "vdds_dpr";
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1351500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ regulator-name = "vio,vrtc,vdds";
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ regulator-name = "vdd_3v3aux";
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ regulator-name = "vdd_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ regulator-name = "vdd_3v3a";
+ regulator-always-on;
+ };
+ };
+};
+
+&aes {
+ status = "okay";
+};
+
+&sham {
+ status = "okay";
+};
diff --git a/src/arm/ti/omap/am335x-pcm-953.dtsi b/src/arm/ti/omap/am335x-pcm-953.dtsi
new file mode 100644
index 0000000..75efe1c
--- /dev/null
+++ b/src/arm/ti/omap/am335x-pcm-953.dtsi
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2017 Phytec Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ * Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Phytec AM335x PCM-953";
+ compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx";
+
+ /* Power */
+ vcc3v3: fixedregulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ vcc1v8: fixedregulator2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ /* User IO */
+ user_leds: user-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_pins>;
+
+ user-led0 {
+ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ user-led1 {
+ gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ user_buttons: user-buttons {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_buttons_pins>;
+
+ button-0 {
+ label = "home";
+ linux,code = <KEY_HOME>;
+ gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
+ };
+
+ button-1 {
+ label = "menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
+ };
+
+ };
+};
+
+&am33xx_pinmux {
+ user_buttons_pins: pinmux-user-buttons-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu0.gpio3_7 */
+ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu1.gpio3_8 */
+ >;
+ };
+
+ user_leds_pins: pinmux-user-leds-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn1.gpio1_30 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn2.gpio1_31 */
+ >;
+ };
+};
+
+/* CAN */
+&am33xx_pinmux {
+ dcan1_pins: pinmux-dcan1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */
+ >;
+ };
+};
+
+&dcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins>;
+ status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+ ethernet1_pins: ethernet1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ >;
+ };
+};
+
+&cpsw_port2 {
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <2>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ phy1: ethernet-phy@2 {
+ reg = <2>;
+ };
+};
+
+&mac_sw {
+ pinctrl-names = "default";
+ pinctrl-0 = <ðernet0_pins ðernet1_pins>;
+};
+
+/* Misc */
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cb_gpio_pins>;
+
+ cb_gpio_pins: pinmux-cb-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_ctsn.gpio1_8 */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_rtsn.gpio1_9 */
+ >;
+ };
+};
+
+/* MMC */
+&am33xx_pinmux {
+ mmc1_pins: pinmux-mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */
+ >;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vcc3v3>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+/* UARTs */
+&am33xx_pinmux {
+ uart0_pins: pinmux-uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ uart1_pins: pinmux-uart1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ uart2_pins: pinmux-uart2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */
+ >;
+ };
+
+ uart3_pins: pinmux-uart3-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd3.uart3_rxd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd2.uart3_txd */
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "okay";
+};
+
+/* USB */
+&usb1 {
+ dr_mode = "host";
+};
diff --git a/src/arm/ti/omap/am335x-pdu001.dts b/src/arm/ti/omap/am335x-pdu001.dts
new file mode 100644
index 0000000..3c9444e
--- /dev/null
+++ b/src/arm/ti/omap/am335x-pdu001.dts
@@ -0,0 +1,573 @@
+/*
+ * pdu001.dts
+ *
+ * EETS GmbH PDU001 board device tree file
+ *
+ * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/leds-pca9532.h>
+
+/ {
+ model = "EETS,PDU001";
+ compatible = "ti,am33xx";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ vbat: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-boot-on;
+ };
+
+ lis3_reg: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "lis3_reg";
+ regulator-boot-on;
+ };
+
+ panel {
+ compatible = "ti,tilcdc,panel";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins_s0>;
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <16>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+
+ display-timings {
+ 240x320p16 {
+ clock-frequency = <6500000>;
+ hactive = <240>;
+ vactive = <320>;
+ hfront-porch = <6>;
+ hback-porch = <6>;
+ hsync-len = <1>;
+ vback-porch = <6>;
+ vfront-porch = <6>;
+ vsync-len = <1>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pixelclk-active = <1>;
+ de-active = <0>;
+ };
+ };
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&clkout2_pin>;
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_d1.i2c1_sda */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_clk.i2c2_sda */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_d0.i2c2_scl */
+ >;
+ };
+
+ spi1_pins: spi1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT, MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT, MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT, MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
+ >;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE1) /* spi0_cs1.uart3_rxd */
+ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */
+ >;
+ };
+
+ clkout2_pin: clkout2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Port 1 (emac0) */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT, MUX_MODE0)
+
+ /* Port 2 (emac1) */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* mii2_txen.gpmc_a0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT, MUX_MODE1) /* mii2_rxdv.gpmc_a1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1) /* mii2_txd3.gpmc_a2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1) /* mii2_txd2.gpmc_a3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1) /* mii2_txd1.gpmc_a4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1) /* mii2_txd0.gpmc_a5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT, MUX_MODE1) /* mii2_txclk.gpmc_a6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT, MUX_MODE1) /* mii2_rxclk.gpmc_a7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT, MUX_MODE1) /* mii2_rxd3.gpmc_a8 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE1) /* mii2_rxd2.gpmc_a9 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE1) /* mii2_rxd1.gpmc_a10 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT, MUX_MODE1) /* mii2_rxd0.gpmc_a11 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT, MUX_MODE1) /* mii2_crs.gpmc_wait0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT, MUX_MODE1) /* mii2_rxer.gpmc_wpn */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT, MUX_MODE1) /* mii2_col.gpmc_ben1 */
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ /* eMMC */
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ /* SD cardcage */
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ /* card change signal for frontpanel SD cardcage */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT, MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */
+ >;
+ };
+
+ lcd_pins_s0: lcd-s0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+ >;
+ };
+
+ dcan0_pins: dcan0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart1_ctsn.d_can0_tx */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2) /* uart1_rtsn.d_can0_rx */
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ rs485-rts-active-high;
+ rs485-rts-delay = <0 0>;
+ linux,rs485-enabled-at-boot-time;
+
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+ };
+
+ m2_eeprom: m2_eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ status = "okay";
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ status = "okay";
+ clock-frequency = <100000>;
+
+ board_24aa025e48: board_24aa025e48@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+
+ backplane_24aa025e48: backplane_24aa025e48@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ };
+
+ pca9532: pca9532@60 {
+ compatible = "nxp,pca9532";
+ reg = <0x60>;
+ psc0 = <0x97>;
+ pwm0 = <0x80>;
+ psc1 = <0x97>;
+ pwm1 = <0x10>;
+
+ run.red@0 {
+ type = <PCA9532_TYPE_LED>;
+ };
+ run.green@1 {
+ type = <PCA9532_TYPE_LED>;
+ default-state = "on";
+ };
+ s2.red@2 {
+ type = <PCA9532_TYPE_LED>;
+ };
+ s2.green@3 {
+ type = <PCA9532_TYPE_LED>;
+ };
+ s1.yellow@4 {
+ type = <PCA9532_TYPE_LED>;
+ };
+ s1.green@5 {
+ type = <PCA9532_TYPE_LED>;
+ };
+ };
+
+ pca9530: pca9530@61 {
+ compatible = "nxp,pca9530";
+ reg = <0x61>;
+
+ tft-panel@0 {
+ type = <PCA9532_TYPE_LED>;
+ linux,default-trigger = "backlight";
+ default-state = "on";
+ };
+ };
+
+ mcp79400: rtc@6f {
+ compatible = "microchip,mcp7940x";
+ reg = <0x6f>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ ti,pindir-d0-out-d1-in;
+ status = "okay";
+
+ display-controller@0 {
+ compatible = "orisetech,otm3225a";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ // SPI mode 3
+ spi-cpol;
+ spi-cpha;
+ status = "okay";
+ };
+};
+
+/*
+ * Disable soc's rtc as we have no VBAT for it. This makes the board
+ * rtc (Microchip MCP79400) the default rtc device 'rtc0'.
+ */
+&rtc {
+ status = "disabled";
+};
+
+&lcdc {
+ status = "okay";
+};
+
+&elm {
+ status = "okay";
+};
+
+#include "../../tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-name = "ldo_vrtc";
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-name = "buck_vdd_ddr";
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ /* VDD_MPU voltage limits */
+ regulator-name = "buck_vdd_mpu";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1312500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDD_CORE voltage limits */
+ regulator-name = "buck_vdd_core";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-name = "boost_res";
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-name = "ldo_vdig1";
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-name = "ldo_vdig2";
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-name = "ldo_vpll";
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-name = "ldo_vdac";
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-name = "ldo_vaux1";
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-name = "ldo_vaux2";
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-name = "ldo_vaux33";
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-name = "ldo_vmmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vbb_reg: regulator@13 {
+ regulator-name = "bat_vbb";
+ };
+ };
+};
+
+&mac_sw {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpsw_default>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default";
+ pinctrl-0 = <&davinci_mdio_default>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "mii";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <ðphy1>;
+ phy-mode = "mii";
+ ti,dual-emac-pvid = <2>;
+};
+
+&tscadc {
+ status = "okay";
+ tsc {
+ ti,wires = <4>;
+ ti,x-plate-resistance = <200>;
+ ti,coordinate-readouts = <5>;
+ ti,wire-config = <0x01 0x10 0x22 0x33>;
+ ti,charge-delay = <0x400>;
+ };
+
+ adc {
+ ti,adc-channels = <4 5 6 7>;
+ };
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmc_reg>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ non-removable;
+};
+
+&mmc2 {
+ status = "okay";
+ vmmc-supply = <&vmmc_reg>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&dcan0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan0_pins>;
+};
diff --git a/src/arm/ti/omap/am335x-pepper.dts b/src/arm/ti/omap/am335x-pepper.dts
new file mode 100644
index 0000000..d5a4a21
--- /dev/null
+++ b/src/arm/ti/omap/am335x-pepper.dts
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "am33xx.dtsi"
+
+/ {
+ model = "Gumstix Pepper";
+ compatible = "gumstix,am335x-pepper", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&dcdc3_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ buttons: user_buttons {
+ compatible = "gpio-keys";
+ };
+
+ leds: user-leds-pins {
+ compatible = "gpio-leds";
+ };
+
+ panel: lcd_panel {
+ compatible = "ti,tilcdc,panel";
+ };
+
+ sound: sound_iface {
+ compatible = "ti,da830-evm-audio";
+ };
+
+ vbat: fixedregulator0 {
+ compatible = "regulator-fixed";
+ };
+
+ v3v3c_reg: fixedregulator1 {
+ compatible = "regulator-fixed";
+ };
+
+ vdd5_reg: fixedregulator2 {
+ compatible = "regulator-fixed";
+ };
+};
+
+/* I2C Busses */
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ audio_codec: tlv320aic3106@1b {
+ compatible = "ti,tlv320aic3106";
+ reg = <0x1b>;
+ ai3x-micbias-vg = <0x2>;
+ };
+
+ accel: lis331dlh@1d {
+ compatible = "st,lis3lv02d";
+ reg = <0x1d>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+};
+
+&am33xx_pinmux {
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE3) /* mii1_crs,i2c1_sda */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE3) /* mii1_rxerr,i2c1_scl */
+ >;
+ };
+};
+
+/* Accelerometer */
+&accel {
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_pins>;
+
+ Vdd-supply = <&ldo3_reg>;
+ Vdd_IO-supply = <&ldo3_reg>;
+ st,irq1-click;
+ st,wakeup-x-lo;
+ st,wakeup-x-hi;
+ st,wakeup-y-lo;
+ st,wakeup-y-hi;
+ st,wakeup-z-lo;
+ st,wakeup-z-hi;
+ st,min-limit-x = <92>;
+ st,max-limit-x = <14>;
+ st,min-limit-y = <14>;
+ st,max-limit-y = <92>;
+ st,min-limit-z = <92>;
+ st,max-limit-z = <14>;
+};
+
+&am33xx_pinmux {
+ accel_pins: accel-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT, MUX_MODE7) /* gpmc_wen.gpio2_4 */
+ >;
+ };
+};
+
+/* Audio */
+&audio_codec {
+ status = "okay";
+
+ reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ AVDD-supply = <&ldo3_reg>;
+ IOVDD-supply = <&ldo3_reg>;
+ DRVDD-supply = <&ldo3_reg>;
+ DVDD-supply = <&dcdc1_reg>;
+};
+
+&sound {
+ ti,model = "AM335x-EVM";
+ ti,audio-codec = <&audio_codec>;
+ ti,mcasp-controller = <&mcasp0>;
+ ti,codec-clock-rate = <12000000>;
+ ti,audio-routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "MIC3L", "Mic3L Switch";
+};
+
+&mcasp0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&audio_pins>;
+
+ op-mode = <0>; /* MCASP_ISS_MODE */
+ tdm-slots = <2>;
+ serial-dir = <
+ 1 2 0 0
+ 0 0 0 0
+ 0 0 0 0
+ 0 0 0 0
+ >;
+ tx-num-evt = <1>;
+ rx-num-evt = <1>;
+};
+
+&am33xx_pinmux {
+ audio_pins: audio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE7) /* gpmc_a0.gpio1_16 */
+ >;
+ };
+};
+
+/* Display: 24-bit LCD Screen */
+&panel {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <32>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 480x272 {
+ clock-frequency = <18400000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <8>;
+ hback-porch = <4>;
+ hsync-len = <41>;
+ vfront-porch = <4>;
+ vback-porch = <2>;
+ vsync-len = <10>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+};
+
+&lcdc {
+ status = "okay";
+};
+
+&am33xx_pinmux {
+ lcd_pins: lcd-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad8.lcd_data16 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad9.lcd_data17 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad10.lcd_data18 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad11.lcd_data19 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad12.lcd_data20 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad13.lcd_data21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad14.lcd_data22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad15.lcd_data23 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+ /* Display Enable */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a11.gpio1_27 */
+ >;
+ };
+};
+
+/* Ethernet */
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii";
+ ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&mac_sw {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <ðernet_pins>;
+};
+
+&am33xx_pinmux {
+ ethernet_pins: ethernet-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE2)
+ /* ethernet interrupt */
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLUP, MUX_MODE7) /* rmii2_refclk.gpio0_29 */
+ /* ethernet PHY nReset */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLUP, MUX_MODE7) /* mii1_col.gpio3_0 */
+ >;
+ };
+
+ mdio_pins: mdio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+};
+
+/* MMC */
+&mmc1 {
+ /* Bootable SD card slot */
+ status = "okay";
+ vmmc-supply = <&ldo3_reg>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc2 {
+ /* eMMC (not populated) on MMC #2 */
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ vmmc-supply = <&ldo3_reg>;
+ bus-width = <8>;
+ non-removable;
+};
+
+&mmc3 {
+ /* Wifi & Bluetooth on MMC #3 */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wireless_pins>;
+ vmmmc-supply = <&v3v3c_reg>;
+ bus-width = <4>;
+ non-removable;
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
+ dma-names = "tx", "rx";
+};
+
+
+&am33xx_pinmux {
+ sd_pins: sd-card-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+ emmc_pins: emmc-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ /* EMMC nReset */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ >;
+ };
+ wireless_pins: wireless-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc1_clk */
+ /* WLAN nReset */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ /* WLAN nPower down */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_wait0.gpio0_30 */
+ /* 32kHz Clock */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ >;
+ };
+};
+
+/* Power */
+&vbat {
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+};
+
+&v3v3c_reg {
+ regulator-name = "v3v3c_reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vbat>;
+};
+
+&vdd5_reg {
+ regulator-name = "vdd5_reg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vbat>;
+};
+
+/include/ "../../tps65217.dtsi"
+
+&tps {
+ backlight {
+ isel = <1>; /* ISET1 */
+ fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
+ default-brightness = <80>;
+ };
+
+ regulators {
+ dcdc1_reg: regulator@0 {
+ /* VDD_1V8 system supply */
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1325000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ /* VRTC 1.8V always-on supply */
+ regulator-name = "vrtc,vdds";
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ /* 3.3V rail */
+ regulator-name = "vdd_3v3aux";
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ /* VDD_3V3A 3.3V rail */
+ regulator-name = "vdd_3v3a";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo4_reg: regulator@6 {
+ /* VDD_3V3B 3.3V rail */
+ regulator-name = "vdd_3v3b";
+ regulator-always-on;
+ };
+ };
+};
+
+/* SPI Busses */
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+};
+
+&am33xx_pinmux {
+ spi0_pins: spi0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+};
+
+/* Touch Screen */
+&tscadc {
+ status = "okay";
+ tsc {
+ ti,wires = <4>;
+ ti,x-plate-resistance = <200>;
+ ti,coordinate-readouts = <5>;
+ ti,wire-config = <0x00 0x11 0x22 0x33>;
+ };
+
+ adc {
+ ti,adc-channels = <4 5 6 7>;
+ };
+};
+
+/* UARTs */
+&uart0 {
+ /* Serial Console */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&uart1 {
+ /* Broken out to J6 header */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&am33xx_pinmux {
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+};
+
+/* USB */
+&usb {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_pins>;
+};
+
+&usb0 {
+ dr_mode = "host";
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&am33xx_pinmux {
+ usb_pins: usb-pins {
+ pinctrl-single,pins = <
+ /* USB0 Over-Current (active low) */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7) /* gpmc_a9.gpio1_25 */
+ /* USB1 Over-Current (active low) */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7) /* gpmc_a10.gpio1_26 */
+ >;
+ };
+};
+
+/* User IO */
+&leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_pins>;
+
+ led0 {
+ label = "pepper:user0:blue";
+ gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ };
+
+ led1 {
+ label = "pepper:user1:red";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ };
+};
+
+&buttons {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_buttons_pins>;
+
+ button-0 {
+ label = "home";
+ linux,code = <KEY_HOME>;
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button-1 {
+ label = "menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button-2 {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+};
+
+&am33xx_pinmux {
+ user_leds_pins: user-leds-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE7) /* gpmc_a4.gpio1_20 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ >;
+ };
+
+ user_buttons_pins: user-buttons-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_a7.gpio1_21 */
+ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_a8.gpio0_7 */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/am335x-phycore-rdk.dts b/src/arm/ti/omap/am335x-phycore-rdk.dts
new file mode 100644
index 0000000..43907d0
--- /dev/null
+++ b/src/arm/ti/omap/am335x-phycore-rdk.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-pcm-953.dtsi"
+
+/* SoM */
+&gpmc {
+ status = "okay";
+};
+
+&i2c_eeprom {
+ status = "okay";
+};
+
+&i2c_rtc {
+ status = "okay";
+};
+
+&serial_flash {
+ status = "okay";
+
+};
diff --git a/src/arm/ti/omap/am335x-phycore-som.dtsi b/src/arm/ti/omap/am335x-phycore-som.dtsi
new file mode 100644
index 0000000..84c15a4
--- /dev/null
+++ b/src/arm/ti/omap/am335x-phycore-som.dtsi
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Phytec AM335x phyCORE";
+ compatible = "phytec,am335x-phycore-som", "ti,am33xx";
+
+ aliases {
+ rtc0 = &i2c_rtc;
+ rtc1 = &rtc;
+ rtc2 = &tps;
+ };
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ vcc5v: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+/* Crypto Module */
+&aes {
+ status = "okay";
+};
+
+&sham {
+ status = "okay";
+};
+
+/* EMMC */
+&am33xx_pinmux {
+ emmc_pins: pinmux-emmc-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ >;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ vmmc-supply = <&vmmc_reg>;
+ bus-width = <8>;
+ non-removable;
+ status = "disabled";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+ ethernet0_pins: ethernet0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ mdio_pins: mdio-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <&phy0>;
+ phy-mode = "rmii";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&mac_sw {
+ pinctrl-names = "default";
+ pinctrl-0 = <ðernet0_pins>;
+ status = "okay";
+};
+
+/* I2C Busses */
+&am33xx_pinmux {
+ i2c0_pins: pinmux-i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
+ >;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ tps: pmic@2d {
+ reg = <0x2d>;
+ };
+
+ i2c_tmp102: temp@4b {
+ compatible = "ti,tmp102";
+ reg = <0x4b>;
+ status = "disabled";
+ };
+
+ i2c_eeprom: eeprom@52 {
+ compatible = "atmel,24c32";
+ pagesize = <32>;
+ reg = <0x52>;
+ status = "disabled";
+ };
+
+ i2c_rtc: rtc@68 {
+ compatible = "microcrystal,rv4162";
+ reg = <0x68>;
+ status = "disabled";
+ };
+};
+
+/* NAND memory */
+&am33xx_pinmux {
+ nandflash_pins: pinmux-nandflash-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
+ >;
+ };
+};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins>;
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0: NAND */
+ nandflash: nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ nand-bus-width = <8>;
+ ti,nand-ecc-opt = "bch8";
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <30>;
+ gpmc,cs-wr-off-ns = <30>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <30>;
+ gpmc,adv-wr-off-ns = <30>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <20>;
+ gpmc,oe-on-ns = <10>;
+ gpmc,oe-off-ns = <30>;
+ gpmc,access-ns = <30>;
+ gpmc,rd-cycle-ns = <30>;
+ gpmc,wr-cycle-ns = <30>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <50>;
+ gpmc,cycle2cycle-diffcsen;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <30>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ ti,elm-id = <&elm>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+/* Power */
+#include "../../tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vcc5v>;
+ vcc2-supply = <&vcc5v>;
+ vcc3-supply = <&vcc5v>;
+ vcc4-supply = <&vcc5v>;
+ vcc5-supply = <&vcc5v>;
+ vcc6-supply = <&vcc5v>;
+ vcc7-supply = <&vcc5v>;
+ vccio-supply = <&vcc5v>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1378000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-name = "vdig1_1p8v";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+/* SPI Busses */
+&am33xx_pinmux {
+ spi0_pins: pinmux-spi0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ status = "okay";
+
+ serial_flash: flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <48000000>;
+ reg = <0x0>;
+ m25p,fast-read;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
diff --git a/src/arm/ti/omap/am335x-pocketbeagle.dts b/src/arm/ti/omap/am335x-pocketbeagle.dts
new file mode 100644
index 0000000..78ce860
--- /dev/null
+++ b/src/arm/ti/omap/am335x-pocketbeagle.dts
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-osd335x-common.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "TI AM335x PocketBeagle";
+ compatible = "ti,am335x-pocketbeagle", "ti,am335x-bone", "ti,am33xx";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usr_leds_pins>;
+
+ compatible = "gpio-leds";
+
+ led-usr0 {
+ label = "beaglebone:green:usr0";
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led-usr1 {
+ label = "beaglebone:green:usr1";
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_DISK_ACTIVITY;
+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led-usr2 {
+ label = "beaglebone:green:usr2";
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_CPU;
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+
+ led-usr3 {
+ label = "beaglebone:green:usr3";
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ vmmcsd_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&gpio0 {
+ gpio-line-names =
+ "NC",
+ "NC",
+ "P1.08 [SPI0_CLK]",
+ "P1.10 [SPI0_MISO]",
+ "P1.12 [SPI0_MOSI]",
+ "P1.06 [SPI0_CS]",
+ "[MMC0_CD]",
+ "P2.29 [SPI1_CLK]",
+ "[SYSBOOT 12]",
+ "[SYSBOOT 13]",
+ "[SYSBOOT 14]",
+ "[SYSBOOT 15]",
+ "P1.26 [I2C2_SDA]",
+ "P1.28 [I2C2_SCL]",
+ "P2.11 [I2C1_SDA]",
+ "P2.09 [I2C1_SCL]",
+ "NC",
+ "NC",
+ "NC",
+ "P2.31 [SPI1_CS]",
+ "P1.20 [PRU0.16]",
+ "NC",
+ "NC",
+ "P2.03",
+ "NC",
+ "NC",
+ "P1.34",
+ "P2.19",
+ "NC",
+ "NC",
+ "P2.05 [UART4_RX]",
+ "P2.07 [UART4_TX]";
+};
+
+&gpio1 {
+ gpio-line-names =
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "P2.25 [SPI1_MOSI]",
+ "P1.32 [UART0_RX]",
+ "P1.30 [UART0_TX]",
+ "P2.24",
+ "P2.33",
+ "P2.22",
+ "P2.18 [PRU0.15i]",
+ "NC",
+ "NC",
+ "P2.01 [PWM1A]",
+ "NC",
+ "P2.10",
+ "[USR LED 0]",
+ "[USR LED 1]",
+ "[USR LED 2]",
+ "[USR LED 3]",
+ "P2.06",
+ "P2.04",
+ "P2.02",
+ "P2.08",
+ "NC",
+ "NC",
+ "NC";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "P2.20",
+ "P2.17",
+ "NC",
+ "NC",
+ "NC",
+ "[EEPROM_WP]",
+ "[SYSBOOT 0]",
+ "[SYSBOOT 1]",
+ "[SYSBOOT 2]",
+ "[SYSBOOT 3]",
+ "[SYSBOOT 4]",
+ "[SYSBOOT 5]",
+ "[SYSBOOT 6]",
+ "[SYSBOOT 7]",
+ "[SYSBOOT 8]",
+ "[SYSBOOT 9]",
+ "[SYSBOOT 10]",
+ "[SYSBOOT 11]",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "P2.35 [AIN5]",
+ "P1.02 [AIN6]",
+ "P1.35 [PRU1.10]",
+ "P1.04 [PRU1.11]",
+ "[MMC0_DAT3]",
+ "[MMC0_DAT2]",
+ "[MMC0_DAT1]",
+ "[MMC0_DAT0]",
+ "[MMC0_CLK]",
+ "[MMC0_CMD]";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "[I2C0_SDA]",
+ "[I2C0_SCL]",
+ "[JTAG EMU0]",
+ "[JTAG EMU1]",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "P1.03 [USB1]",
+ "P1.36 [PWM0A]",
+ "P1.33 [PRU0.1]",
+ "P2.32 [PRU0.2]",
+ "P2.30 [PRU0.3]",
+ "P1.31 [PRU0.4]",
+ "P2.34 [PRU0.5]",
+ "P2.28 [PRU0.6]",
+ "P1.29 [PRU0.7]",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC";
+};
+
+&am33xx_pinmux {
+
+ compatible = "pinconf-single";
+ pinctrl-names = "default";
+
+ /* P2_03 (ZCZ ball T10) gpio0_23 0x824 PIN 9 */
+ P2_03_gpio: P2-03-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
+ pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
+ };
+
+ /* P1_34 (ZCZ ball T11) gpio0_26 0x828 PIN 10 */
+ P1_34_gpio: P1-34-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
+ pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
+ };
+
+ /* P2_19 (ZCZ ball U12) gpio0_27 0x82c PIN 11 */
+ P2_19_gpio: P2-19-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
+ pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
+ };
+
+ /* P2_24 (ZCZ ball T12) gpio1_12 0x830 PIN 12 */
+ P2_24_gpio: P2-24-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
+ pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
+ };
+
+ /* P2_33 (ZCZ ball R12) gpio1_13 0x834 PIN 13 */
+ P2_33_gpio: P2-33-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
+ pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
+ };
+
+ /* P2_22 (ZCZ ball V13) gpio1_14 0x838 PIN 14 */
+ P2_22_gpio: P2-22-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
+ pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
+ };
+
+ /* P2_20 (ZCZ ball T13) gpio2_00 0x888 */
+ P2_20_gpio: P2-20-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
+ pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
+ };
+
+ /* P2_10 (ZCZ ball R14) gpio1_20 0x850 PIN 20 */
+ P2_10_gpio: P2-10-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
+ pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
+ };
+
+ /* P2_06 (ZCZ ball U16) gpio1_25 0x864 PIN 25 */
+ P2_06_gpio: P2-06-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
+ pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
+ };
+
+ /* P2_04 (ZCZ ball T16) gpio1_26 0x868 PIN 26 */
+ P2_04_gpio: P2-04-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
+ pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
+ };
+
+ /* P2_02 (ZCZ ball V17) gpio1_27 0x86c PIN 27 */
+ P2_02_gpio: P2-02-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
+ pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
+ };
+
+ /* P2_08 (ZCZ ball U18) gpio1_28 0x878 PIN 30 */
+ P2_08_gpio: P2-08-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ pinctrl-single,bias-pullup = < 0x00 0x10 0x00 0x18>;
+ pinctrl-single,bias-pulldown = < 0x00 0x00 0x10 0x18>;
+ };
+
+ /* P2_17 (ZCZ ball V12) gpio2_1 0x88c PIN 35 */
+ P2_17_gpio: P2-17-gpio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
+ pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
+ };
+
+ i2c2_pins: pinmux-i2c2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */
+ >;
+ };
+
+ ehrpwm0_pins: pinmux-ehrpwm0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* (A13) mcasp0_aclkx.ehrpwm0A */
+ >;
+ };
+
+ ehrpwm1_pins: pinmux-ehrpwm1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */
+ >;
+ };
+
+ mmc0_pins: pinmux-mmc0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ spi0_pins: pinmux-spi0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ spi1_pins: pinmux-spi1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4) /* (C18) eCAP0_in_PWM0_out.spi1_sclk */
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* (E18) uart0_ctsn.spi1_d0 */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* (E17) uart0_rtsn.spi1_d1 */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE4) /* (A15) xdma_event_intr0.spi1_cs1 */
+ >;
+ };
+
+ usr_leds_pins: pinmux-usr-leds-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
+ >;
+ };
+
+ uart0_pins: pinmux-uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ uart4_pins: pinmux-uart4-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* (U17) gpmc_wpn.uart4_txd */
+ >;
+ };
+
+ pru0_pins: pinmux-pru0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE5)/* (D14) xdma_event_intr1.pr1_pru0_pru_r31_16 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE5)/* (A14) mcasp0_ahclkx.pr1_pru0_pru_r30_7 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE5) /* (B12) mcasp0_acklr.pr1_pru0_pru_r30_4 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE5) /* (B13) mcasp0_fsx.pr1_pru0_pru_r30_1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE6) /* (U13) gpmc_ad15.pr1_pru0_pru_r31_15 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_OUTPUT_PULLDOWN, MUX_MODE5) /* (D13) mcasp0_axr1.pr1_pru0_pru_r30_6 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE5)/* (C12) mcasp0_ahclkr.pr1_pru0_pru_r30_3 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_OUTPUT_PULLDOWN, MUX_MODE5) /* (D12) mcasp0_axr0.pr1_pru0_pru_r30_2 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_OUTPUT_PULLDOWN, MUX_MODE5) /* (C13) mcasp0_fsr.pr1_pru0_pru_r30_5 */
+ >;
+ };
+
+ pru1_pins: pinmux-pru1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE5)/*(R6) lcd_ac_bias_en.pr1_pru1_pru_r30_11 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE5) /* (V5) lcd_pclk.pr1_pru1_pru_r30_10 */
+ >;
+ };
+};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&ehrpwm0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ehrpwm0_pins>;
+};
+
+&epwmss1 {
+ status = "okay";
+};
+
+&ehrpwm1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ehrpwm1_pins>;
+};
+
+&i2c0 {
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&rtc {
+ system-power-controller;
+};
+
+&tscadc {
+ status = "okay";
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ ti,chan-step-avg = <16 16 16 16 16 16 16 16>;
+ ti,chan-step-opendelay = <0x98 0x98 0x98 0x98 0x98 0x98 0x98 0x98>;
+ ti,chan-step-sampledelay = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "otg";
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&pruss_tm {
+ status = "okay";
+};
+
+&pru0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pru0_pins>;
+};
+
+&pru1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pru1_pins>;
+};
diff --git a/src/arm/ti/omap/am335x-regor-rdk.dts b/src/arm/ti/omap/am335x-regor-rdk.dts
new file mode 100644
index 0000000..66a1360
--- /dev/null
+++ b/src/arm/ti/omap/am335x-regor-rdk.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-regor.dtsi"
+
+/* SoM */
+&gpmc {
+ status = "okay";
+};
+
+&i2c_eeprom {
+ status = "okay";
+};
+
+&serial_flash {
+ status = "okay";
+};
diff --git a/src/arm/ti/omap/am335x-regor.dtsi b/src/arm/ti/omap/am335x-regor.dtsi
new file mode 100644
index 0000000..625db3b
--- /dev/null
+++ b/src/arm/ti/omap/am335x-regor.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ */
+
+/ {
+ model = "Phytec AM335x phyBOARD-REGOR";
+ compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx";
+
+ vcc3v3: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ /* User IO */
+ user_leds: user-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_pins>;
+
+ run_stop-led {
+ gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "gpio";
+ default-state = "off";
+ };
+
+ error-led {
+ gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "gpio";
+ default-state = "off";
+ };
+ };
+};
+
+/* User Leds */
+&am33xx_pinmux {
+ user_leds_pins: pinmux-user-leds-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_22 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_fsx.gpio3_15 */
+ >;
+ };
+};
+
+/* CAN Busses */
+&am33xx_pinmux {
+ dcan1_pins: pinmux-dcan1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+ >;
+ };
+};
+
+&dcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins>;
+ status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+ ethernet1_pins: pinmux-ethernet1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1) /* gpmc_a2.mii2_txd3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1) /* gpmc_a3.mii2_txd2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1) /* gpmc_a4.mii2_txd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1) /* gpmc_a5.mii2_txd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a6.mii2_txclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a7.mii2_rxclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a8.mii2_rxd3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a9.mii2_rxd2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a10.mii2_rxd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a11.mii2_rxd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_wpn.mii2_rxerr */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_ben1.mii2_col */
+ >;
+ };
+};
+
+&cpsw_port2 {
+ status = "okay";
+ phy-handle = <&phy1>;
+ phy-mode = "mii";
+ ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&mac_sw {
+ pinctrl-names = "default";
+ pinctrl-0 = <ðernet0_pins ðernet1_pins>;
+};
+
+/* GPIOs */
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_gpios_pins>;
+
+ user_gpios_pins: pinmux-user-gpios-pins {
+ pinctrl-single,pins = <
+ /* DIGIN 1-4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7) /* gpmc_ad11.gpio0_27 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT, MUX_MODE7) /* gpmc_ad10.gpio0_26 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT, MUX_MODE7) /* gpmc_ad9.gpio0_23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT, MUX_MODE7) /* gpmc_ad8.gpio0_22 */
+ /* DIGOUT 1-4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad15.gpio1_15 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad14.gpio1_14 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad13.gpio1_13 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad12.gpio1_12 */
+ >;
+ };
+};
+
+/* MMC */
+&am33xx_pinmux {
+ mmc1_pins: pinmux-mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */
+ >;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vcc3v3>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+/* RTC */
+&i2c_rtc {
+ status = "okay";
+};
+
+/* UARTs */
+&am33xx_pinmux {
+ uart0_pins: pinmux-uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ uart2_pins: pinmux-uart2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+/* RS485 - UART1 */
+&am33xx_pinmux {
+ uart1_rs485_pins: pinmux-uart1-rs485-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_rs485_pins>;
+ status = "okay";
+ linux,rs485-enabled-at-boot-time;
+};
diff --git a/src/arm/ti/omap/am335x-sancloud-bbe-common.dtsi b/src/arm/ti/omap/am335x-sancloud-bbe-common.dtsi
new file mode 100644
index 0000000..a138eb3
--- /dev/null
+++ b/src/arm/ti/omap/am335x-sancloud-bbe-common.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&am33xx_pinmux {
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ >;
+ };
+
+ cpsw_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ usb_hub_ctrl: usb-hub-ctrl-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* rmii1_refclk.gpio0_29 */
+ >;
+ };
+};
+
+&mac_sw {
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+};
+
+&cpsw_port1 {
+ phy-mode = "rgmii-id";
+};
+
+&i2c0 {
+ usb2512b: usb-hub@2c {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_hub_ctrl>;
+ compatible = "microchip,usb2512b";
+ reg = <0x2c>;
+ reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ };
+};
diff --git a/src/arm/ti/omap/am335x-sancloud-bbe-extended-wifi.dts b/src/arm/ti/omap/am335x-sancloud-bbe-extended-wifi.dts
new file mode 100644
index 0000000..5522759
--- /dev/null
+++ b/src/arm/ti/omap/am335x-sancloud-bbe-extended-wifi.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Sancloud Ltd
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "SanCloud BeagleBone Enhanced Extended WiFi";
+ compatible = "sancloud,am335x-boneenhanced",
+ "ti,am335x-bone-black",
+ "ti,am335x-bone",
+ "ti,am33xx";
+
+ wlan_en_reg: fixedregulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ };
+};
+
+&am33xx_pinmux {
+ mmc3_pins: mmc3-pins {
+ pinctrl-single,pins = <
+ /* gpmc_a9.gpio1_25: RADIO_EN */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_OUTPUT_PULLUP, MUX_MODE7)
+
+ /* gpmc_ad12.mmc2_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)
+
+ /* gpmc_ad13.mmc2_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)
+
+ /* gpmc_ad14.mmc2_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)
+
+ /* gpmc_ad15.mmc2_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)
+
+ /* gpmc_csn3.mmc2_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)
+
+ /* gpmc_clk.mmc2_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)
+ >;
+ };
+
+ bluetooth_pins: bluetooth-pins {
+ pinctrl-single,pins = <
+ /* event_intr0.gpio0_19 */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ };
+
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ /* uart1_rxd */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+
+ /* uart1_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+
+ /* uart1_ctsn */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+
+ /* uart1_rtsn */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "okay";
+ vmmc-supply = <&wlan_en_reg>;
+ bus-width = <4>;
+ non-removable;
+ cap-power-off-card;
+ ti,needs-special-hs-handling;
+ keep-power-in-suspend;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
+ dma-names = "tx", "rx";
+ clock-frequency = <50000000>;
+ max-frequency = <50000000>;
+};
+
+&uart1 {
+ status = "okay";
+
+ bluetooth {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins &bluetooth_pins>;
+ compatible = "qcom,qca6174-bt";
+ enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+ clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+ };
+};
diff --git a/src/arm/ti/omap/am335x-sancloud-bbe-lite.dts b/src/arm/ti/omap/am335x-sancloud-bbe-lite.dts
new file mode 100644
index 0000000..b1b4002
--- /dev/null
+++ b/src/arm/ti/omap/am335x-sancloud-bbe-lite.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2021 SanCloud Ltd
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
+
+/ {
+ model = "SanCloud BeagleBone Enhanced Lite";
+ compatible = "sancloud,am335x-boneenhanced",
+ "ti,am335x-bone-black",
+ "ti,am335x-bone",
+ "ti,am33xx";
+};
+
+&am33xx_pinmux {
+ bb_spi0_pins: bb-spi0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE0)
+ >;
+ };
+};
+
+&spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bb_spi0_pins>;
+
+ channel@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "micron,spi-authenta";
+
+ reg = <0>;
+ spi-max-frequency = <16000000>;
+ spi-cpha;
+ };
+};
diff --git a/src/arm/ti/omap/am335x-sancloud-bbe.dts b/src/arm/ti/omap/am335x-sancloud-bbe.dts
new file mode 100644
index 0000000..3266934
--- /dev/null
+++ b/src/arm/ti/omap/am335x-sancloud-bbe.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-boneblack-hdmi.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "SanCloud BeagleBone Enhanced";
+ compatible = "sancloud,am335x-boneenhanced", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&am33xx_pinmux {
+ mpu6050_pins: mpu6050-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE7) /* uart0_ctsn.gpio1_8 */
+ >;
+ };
+
+ lps3331ap_pins: lps3331ap-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7) /* gpmc_a10.gpio1_26 */
+ >;
+ };
+};
+
+&i2c0 {
+ lps331ap: barometer@5c {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lps3331ap_pins>;
+ compatible = "st,lps331ap-press";
+ st,drdy-int-pin = <1>;
+ reg = <0x5c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ mpu6050: accelerometer@68 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpu6050_pins>;
+ compatible = "invensense,mpu6050";
+ reg = <0x68>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+ orientation = <0xff 0 0 0 1 0 0 0 0xff>;
+ };
+};
diff --git a/src/arm/ti/omap/am335x-sbc-t335.dts b/src/arm/ti/omap/am335x-sbc-t335.dts
new file mode 100644
index 0000000..596774c
--- /dev/null
+++ b/src/arm/ti/omap/am335x-sbc-t335.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * am335x-sbc-t335.dts - Device Tree file for Compulab SBC-T335
+ *
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ */
+
+#include "am335x-cm-t335.dts"
+
+/ {
+ model = "CompuLab CM-T335 on SB-T335";
+ compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx";
+
+ /* DRM display driver */
+ panel {
+ compatible = "ti,tilcdc,panel";
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&lcd_pins_default>;
+ pinctrl-1 = <&lcd_pins_sleep>;
+
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <32>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+ display-timings {
+ /* Timing selection performed by U-Boot */
+ timing0: lcd {/* 800x480p62 */
+ clock-frequency = <30000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <39>;
+ hback-porch = <39>;
+ hsync-len = <47>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ vsync-len = <2>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ timing1: dvi { /* 1024x768p60 */
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ hfront-porch = <24>;
+ hback-porch = <160>;
+ hsync-len = <136>;
+ vactive = <768>;
+ vfront-porch = <3>;
+ vback-porch = <29>;
+ vsync-len = <6>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
+};
+
+&am33xx_pinmux {
+ /* Display */
+ lcd_pins_default: lcd-default-pins {
+ pinctrl-single,pins = <
+ /* gpmc_ad8.lcd_data23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)
+ /* gpmc_ad9.lcd_data22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)
+ /* gpmc_ad10.lcd_data21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)
+ /* gpmc_ad11.lcd_data20 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)
+ /* gpmc_ad12.lcd_data19 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)
+ /* gpmc_ad13.lcd_data18 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)
+ /* gpmc_ad14.lcd_data17 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)
+ /* gpmc_ad15.lcd_data16 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+ >;
+ };
+
+ lcd_pins_sleep: lcd-sleep-pins {
+ pinctrl-single,pins = <
+ /* gpmc_ad8.lcd_data23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ /* gpmc_ad9.lcd_data22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ /* gpmc_ad10.lcd_data21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ /* gpmc_ad11.lcd_data20 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ /* gpmc_ad12.lcd_data19 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ /* gpmc_ad13.lcd_data18 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ /* gpmc_ad14.lcd_data17 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ /* gpmc_ad15.lcd_data16 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+};
+
+&i2c0 {
+ /* GPIO extender */
+ gpio_ext: pca9555@26 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x26>;
+ dvi-ena-hog {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "dvi-enable";
+ };
+ lcd-ena-hog {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "lcd-enable";
+ };
+ };
+};
+
+/* Display */
+&lcdc {
+ status = "okay";
+};
diff --git a/src/arm/ti/omap/am335x-shc.dts b/src/arm/ti/omap/am335x-shc.dts
new file mode 100644
index 0000000..9297cb1
--- /dev/null
+++ b/src/arm/ti/omap/am335x-shc.dts
@@ -0,0 +1,559 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * support for the bosch am335x based shc c3 board
+ *
+ * Copyright, C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Bosch SHC";
+ compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
+
+ aliases {
+ mmcblk0 = &mmc1;
+ mmcblk1 = &mmc2;
+ };
+
+ cpus {
+ cpu@0 {
+ /*
+ * To consider voltage drop between PMIC and SoC,
+ * tolerance value is reduced to 2% from 4% and
+ * voltage value is increased as a precaution.
+ */
+ operating-points = <
+ /* kHz uV */
+ 594000 1225000
+ 294000 1125000
+ >;
+ voltage-tolerance = <2>; /* 2 percentage */
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ back-button {
+ label = "Back Button";
+ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_BACK>;
+ debounce-interval = <1000>;
+ wakeup-source;
+ };
+
+ front-button {
+ label = "Front Button";
+ gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_FRONT>;
+ debounce-interval = <1000>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "shc:power:red";
+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "shc:power:bl";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+ default-state = "on";
+ };
+
+ led3 {
+ label = "shc:lan:red";
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led4 {
+ label = "shc:lan:bl";
+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led5 {
+ label = "shc:cloud:red";
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led6 {
+ label = "shc:cloud:bl";
+ gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ vmmcsd_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&aes {
+ status = "okay";
+};
+
+&epwmss1 {
+ status = "okay";
+
+ ehrpwm1: pwm@200 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ehrpwm1_pins>;
+ status = "okay";
+ };
+};
+
+&gpio1 {
+ hmtc-rst-hog {
+ gpio-hog;
+ gpios = <24 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "homematic_reset";
+ };
+
+ hmtc-prog-hog {
+ gpio-hog;
+ gpios = <27 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "homematic_program";
+ };
+};
+
+&gpio3 {
+ zgb-rst-hog {
+ gpio-hog;
+ gpios = <18 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "zigbee_reset";
+ };
+
+ zgb-boot-hog {
+ gpio-hog;
+ gpios = <19 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "zigbee_boot";
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+ at24@50 {
+ compatible = "atmel,24c32";
+ pagesize = <32>;
+ reg = <0x50>;
+ };
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+};
+
+&cpsw_port1 {
+ phy-mode = "mii";
+ phy-handle = <ðernetphy0>;
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+
+ ethernetphy0: ethernet-phy@0 {
+ reg = <0>;
+ smsc,disable-energy-detect;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ bus-width = <0x4>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ cd-inverted;
+ max-frequency = <26000000>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ bus-width = <8>;
+ max-frequency = <26000000>;
+ sd-uhs-sdr25;
+ vmmc-supply = <&vmmcsd_fixed>;
+ status = "okay";
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+ bus-width = <4>;
+ cap-power-off-card;
+ max-frequency = <26000000>;
+ sd-uhs-sdr25;
+ vmmc-supply = <&vmmcsd_fixed>;
+ status = "okay";
+};
+
+&rtc {
+ ti,no-init;
+};
+
+&sham {
+ status = "okay";
+};
+
+&tps {
+ compatible = "ti,tps65217";
+ ti,pmic-shutdown-controller;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dcdc1_reg: regulator@0 {
+ reg = <0>;
+ regulator-name = "vdds_dpr";
+ regulator-compatible = "dcdc1";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ reg = <1>;
+ /*
+ * VDD_MPU voltage limits 0.95V - 1.26V with
+ * +/-4% tolerance
+ */
+ regulator-compatible = "dcdc2";
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <70000>;
+ };
+
+ dcdc3_reg: regulator@2 {
+ reg = <2>;
+ /*
+ * VDD_CORE voltage limits 0.95V - 1.1V with
+ * +/-4% tolerance
+ */
+ regulator-name = "vdd_core";
+ regulator-compatible = "dcdc3";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ reg = <3>;
+ regulator-name = "vio,vrtc,vdds";
+ regulator-compatible = "ldo1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ reg = <4>;
+ regulator-name = "vdd_3v3aux";
+ regulator-compatible = "ldo2";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ reg = <5>;
+ regulator-name = "vdd_1v8";
+ regulator-compatible = "ldo3";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ reg = <6>;
+ regulator-name = "vdd_3v3a";
+ regulator-compatible = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&clkout2_pin>;
+
+ clkout2_pin: clkout2-pins {
+ pinctrl-single,pins = <
+ /* xdma_event_intr1.clkout2 */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT, MUX_MODE6)
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ cpsw_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci-mdio-sleep-pins {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ ehrpwm1_pins: ehrpwm1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6) /* gpmc_a3.gpio1_19 */
+ >;
+ };
+
+ emmc_pins: emmc-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)
+ >;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE5)
+ >;
+ };
+
+ mmc3_pins: mmc3-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT, MUX_MODE3)
+ >;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT, MUX_MODE0)
+ >;
+ };
+
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)
+ >;
+ };
+
+ uart4_pins: uart4-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE6)
+ >;
+ };
+
+ user_leds_s0: user-leds-s0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLUP, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLUP, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_INPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLUP, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/am335x-sl50.dts b/src/arm/ti/omap/am335x-sl50.dts
new file mode 100644
index 0000000..1115c81
--- /dev/null
+++ b/src/arm/ti/omap/am335x-sl50.dts
@@ -0,0 +1,721 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Toby Churchill SL50 Series";
+ compatible = "tcl,am335x-sl50", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led0 {
+ label = "sl50:red:usr0";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led1 {
+ label = "sl50:green:usr1";
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "sl50:red:usr2";
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "sl50:green:usr3";
+ gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ backlight0: disp0 {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight0_pins>;
+ pwms = <&ehrpwm1 0 500000 PWM_POLARITY_INVERTED>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ enable-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ power-supply = <&vdd_sys_reg>;
+ };
+
+ backlight1: disp1 {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight1_pins>;
+ pwms = <&ehrpwm1 1 500000 PWM_POLARITY_INVERTED>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ enable-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ power-supply = <&vdd_sys_reg>;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* audio external oscillator */
+ audio_mclk_fixed: oscillator@0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>; /* 24.576MHz */
+ };
+
+ audio_mclk: audio_mclk_gate@0 {
+ compatible = "gpio-gate-clock";
+ #clock-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&audio_mclk_pins>;
+ clocks = <&audio_mclk_fixed>;
+ enable-gpios = <&gpio1 27 0>;
+ };
+ };
+
+ panel: lcd_panel {
+ compatible = "ti,tilcdc,panel";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <16>;
+ fdd = <0x80>;
+ tft-alt-mode = <0>;
+ mono-8bit-mode = <0>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 960x128 {
+ clock-frequency = <18000000>;
+ hactive = <960>;
+ vactive = <272>;
+
+ hback-porch = <40>;
+ hfront-porch = <16>;
+ hsync-len = <24>;
+ hsync-active = <0>;
+
+ vback-porch = <3>;
+ vfront-porch = <8>;
+ vsync-len = <4>;
+ vsync-active = <0>;
+ };
+ };
+ };
+
+ sound {
+ compatible = "audio-graph-card";
+ label = "sound-card";
+ pinctrl-names = "default";
+ pinctrl-0 = <&audio_pa_pins>;
+
+ widgets = "Headphone", "Headphone Jack",
+ "Speaker", "Speaker External",
+ "Line", "Line In",
+ "Microphone", "Microphone Jack";
+
+ routing = "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "Amplifier", "MONO_LOUT",
+ "Speaker External", "Amplifier",
+ "LINE1R", "Line In",
+ "LINE1L", "Line In",
+ "MIC3L", "Microphone Jack",
+ "MIC3R", "Microphone Jack",
+ "Microphone Jack", "Mic Bias";
+
+ dais = <&cpu_port>;
+
+ pa-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ emmc_pwrseq: pwrseq@0 {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pwrseq_pins>;
+ reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+ };
+
+ vdd_sys_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_sys_reg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vmmcsd_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lwb_pins>;
+
+ audio_pins: audio-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ >;
+ };
+
+ audio_pa_pins: audio-pa-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLDOWN, MUX_MODE7) /* SoundPA_en - mcasp0_aclkr.gpio3_18 */
+ >;
+ };
+
+ audio_mclk_pins: audio-mclk-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.gpio1_27 */
+ >;
+ };
+
+ backlight0_pins: backlight0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7) /* gpmc_wen.gpio2_4 */
+ >;
+ };
+
+ backlight1_pins: backlight1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad10.gpio0_26 */
+ >;
+ };
+
+ lcd_pins: lcd-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ led_pins: led-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* gpmc_a7.gpio1_23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ >;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ uart4_pins: uart4-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) /* gpmc_wait0.uart4_rxd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* gpmc_wpn.uart4_txd */
+ >;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_ctsn.i2c2_sda */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_rtsn.i2c2_scl */
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ cpsw_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ /* Ethernet */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7) /* Ethernet_nRST - gpmc_ad14.gpio1_14 */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci-mdio-sleep-pins {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE7) /* uart0_rtsn.gpio1_9 */
+ >;
+ };
+
+ emmc_pwrseq_pins: emmc-pwrseq-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a4.gpio1_20 */
+ >;
+ };
+
+ emmc_pins: emmc-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ >;
+ };
+
+ ehrpwm1_pins: ehrpwm1a-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE6) /* gpmc_a2.ehrpwm1a */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6) /* gpmc_a3.ehrpwm1b */
+ >;
+ };
+
+ rtc0_irq_pins: rtc0-irq-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_ad9.gpio0_23 */
+ >;
+ };
+
+ spi0_pins: spi0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_MOSI */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_MISO */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_CS0 (NBATTSS) */
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_CS1 (FPGA_FLASH_NCS) */
+ >;
+ };
+
+ lwb_pins: lwb-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7) /* nKbdInt - gpmc_ad12.gpio1_12 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */
+ /* PDI Bus - Battery system */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLUP, MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */
+ /* FPGA */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE7) /* FPGA_DONE - gpmc_ad8.gpio0_22 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLUP, MUX_MODE7) /* FPGA_NRST - gpmc_a0.gpio1_16 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* FPGA_RUN - gpmc_a1.gpio1_17 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7) /* ENFPGA - gpmc_a9.gpio1_25 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* FPGA_PROGRAM - gpmc_a10.gpio1_26 */
+ >;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+ rtc0: rtc@68 {
+ compatible = "dallas,ds1339";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc0_irq_pins>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <23 IRQ_TYPE_EDGE_FALLING>; /* gpio 23 */
+ wakeup-source;
+ trickle-resistor-ohms = <2000>;
+ reg = <0x68>;
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ gpio_exp: mcp23017@20 {
+ compatible = "microchip,mcp23017";
+ reg = <0x20>;
+ };
+
+};
+
+&i2c2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <400000>;
+
+ audio_codec: tlv320aic3106@1b {
+ status = "okay";
+ compatible = "ti,tlv320aic3106";
+ #sound-dai-cells = <0>;
+ reg = <0x1b>;
+ ai3x-micbias-vg = <2>; /* 2.5V */
+
+ AVDD-supply = <&ldo4_reg>;
+ IOVDD-supply = <&ldo4_reg>;
+ DRVDD-supply = <&ldo4_reg>;
+ DVDD-supply = <&ldo3_reg>;
+
+ codec_port: port {
+ codec_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint>;
+ clocks = <&audio_mclk>;
+ };
+ };
+ };
+
+ /* Ambient Light Sensor */
+ als: isl29023@44 {
+ compatible = "isil,isl29023";
+ reg = <0x44>;
+ };
+};
+
+&rtc {
+ status = "disabled";
+};
+
+&usb0 {
+ dr_mode = "otg";
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&mmc1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ bus-width = <4>;
+ cd-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ bus-width = <8>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ mmc-pwrseq = <&emmc_pwrseq>;
+};
+
+&mcasp0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&audio_pins>;
+ #sound-dai-cells = <0>;
+ op-mode = <0>; /* MCASP_ISS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializers */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 1 2
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+
+ cpu_port: port {
+ cpu_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+
+ dai-format = "dsp_b";
+ bitclock-master = <&codec_port>;
+ frame-master = <&codec_port>;
+ bitclock-inversion;
+ clocks = <&audio_mclk>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&uart4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+
+ flash: flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q032";
+ reg = <1>;
+ spi-max-frequency = <5000000>;
+ };
+};
+
+#include "../../tps65217.dtsi"
+
+&tps {
+ ti,pmic-shutdown-controller;
+
+ interrupt-parent = <&intc>;
+ interrupts = <7>; /* NNMI */
+
+ regulators {
+ dcdc1_reg: regulator@0 {
+ /* VDDS_DDR */
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1325000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ /* VRTC / VIO / VDDS*/
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo2_reg: regulator@4 {
+ /* VDD_3V3AUX */
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo3_reg: regulator@5 {
+ /* VDD_1V8 */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ /* VDD_3V3A */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&cpsw_port1 {
+ phy-mode = "mii";
+ phy-handle = <ðphy0>;
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&mac_sw {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <100>; /* PHY datasheet states 100us min */
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&epwmss1 {
+ status = "okay";
+};
+
+&ehrpwm1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ehrpwm1_pins>;
+};
+
+&lcdc {
+ status = "okay";
+};
+
+&tscadc {
+ status = "okay";
+};
+
+&am335x_adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+};
diff --git a/src/arm/ti/omap/am335x-wega-rdk.dts b/src/arm/ti/omap/am335x-wega-rdk.dts
new file mode 100644
index 0000000..866b5f0
--- /dev/null
+++ b/src/arm/ti/omap/am335x-wega-rdk.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-wega.dtsi"
+
+/* SoM */
+&gpmc {
+ status = "okay";
+};
+
+&i2c_eeprom {
+ status = "okay";
+};
+
+&i2c_rtc {
+ status = "okay";
+};
diff --git a/src/arm/ti/omap/am335x-wega.dtsi b/src/arm/ti/omap/am335x-wega.dtsi
new file mode 100644
index 0000000..cb27ff4
--- /dev/null
+++ b/src/arm/ti/omap/am335x-wega.dtsi
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/ {
+ model = "Phytec AM335x phyBOARD-WEGA";
+ compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
+
+ sound: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "snd-wega";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_iface_main>;
+ simple-audio-card,frame-master = <&sound_iface_main>;
+ simple-audio-card,mclk-fs = <32>;
+ simple-audio-card,widgets =
+ "Line", "Line In",
+ "Line", "Line Out",
+ "Speaker", "Speaker";
+ simple-audio-card,routing =
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "Speaker", "SPOP",
+ "Speaker", "SPOM",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp0>;
+ };
+
+ sound_iface_main: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3007>;
+ clocks = <&mcasp0_fck>;
+ };
+
+ };
+
+ vcc3v3: fixedregulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+};
+
+/* Audio */
+&am33xx_pinmux {
+ mcasp0_pins: pinmux-mcasp0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+};
+
+&i2c0 {
+ tlv320aic3007: tlv320aic3007@18 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3007";
+ reg = <0x18>;
+ AVDD-supply = <&vcc3v3>;
+ IOVDD-supply = <&vcc3v3>;
+ DRVDD-supply = <&vcc3v3>;
+ DVDD-supply = <&vdig1_reg>;
+ status = "okay";
+ };
+};
+
+&mcasp0 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp0_pins>;
+ op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ serial-dir = <
+ 2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
+ >;
+ tx-num-evt = <16>;
+ rx-num-evt = <16>;
+ status = "okay";
+};
+
+
+/* CAN Busses */
+&am33xx_pinmux {
+ dcan1_pins: pinmux-dcan1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+ >;
+ };
+};
+
+&dcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins>;
+ status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+ ethernet1_pins: pinmux-ethernet1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1) /* gpmc_a2.mii2_txd3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1) /* gpmc_a3.mii2_txd2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1) /* gpmc_a4.mii2_txd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1) /* gpmc_a5.mii2_txd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a6.mii2_txclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a7.mii2_rxclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a8.mii2_rxd3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a9.mii2_rxd2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a10.mii2_rxd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a11.mii2_rxd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_wpn.mii2_rxerr */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_ben1.mii2_col */
+ >;
+ };
+};
+
+&cpsw_port2 {
+ status = "okay";
+ phy-handle = <&phy1>;
+ phy-mode = "mii";
+ ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&mac_sw {
+ pinctrl-names = "default";
+ pinctrl-0 = <ðernet0_pins ðernet1_pins>;
+};
+
+/* MMC */
+&am33xx_pinmux {
+ mmc1_pins: pinmux-mmc1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */
+ >;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vcc3v3>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+/* Power */
+&vdig1_reg {
+ regulator-boot-on;
+ regulator-always-on;
+};
+
+/* UARTs */
+&am33xx_pinmux {
+ uart0_pins: pinmux-uart0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ uart1_pins: pinmux-uart1-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "host";
+};
diff --git a/src/arm/ti/omap/am33xx-clocks.dtsi b/src/arm/ti/omap/am33xx-clocks.dtsi
new file mode 100644
index 0000000..d34483a
--- /dev/null
+++ b/src/arm/ti/omap/am33xx-clocks.dtsi
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for AM33xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&scm_clocks {
+ sys_clkin_ck: clock-sys-clkin-22@40 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "sys_clkin_ck";
+ clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+ ti,bit-shift = <22>;
+ reg = <0x0040>;
+ };
+
+ adc_tsc_fck: clock-adc-tsc-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "adc_tsc_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dcan0_fck: clock-dcan0-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dcan0_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dcan1_fck: clock-dcan1-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dcan1_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ mcasp0_fck: clock-mcasp0-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "mcasp0_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ mcasp1_fck: clock-mcasp1-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "mcasp1_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ smartreflex0_fck: clock-smartreflex0-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "smartreflex0_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ smartreflex1_fck: clock-smartreflex1-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "smartreflex1_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ sha0_fck: clock-sha0-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "sha0_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ aes0_fck: clock-aes0-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "aes0_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ rng_fck: clock-rng-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "rng_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ clock@664 {
+ compatible = "ti,clksel";
+ reg = <0x664>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ ehrpwm0_tbclk: clock-ehrpwm0-tbclk {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm0_tbclk";
+ clocks = <&l4ls_gclk>;
+ ti,bit-shift = <0>;
+ };
+
+ ehrpwm1_tbclk: clock-ehrpwm1-tbclk {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm1_tbclk";
+ clocks = <&l4ls_gclk>;
+ ti,bit-shift = <1>;
+ };
+
+ ehrpwm2_tbclk: clock-ehrpwm2-tbclk {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm2_tbclk";
+ clocks = <&l4ls_gclk>;
+ ti,bit-shift = <2>;
+ };
+ };
+};
+&prcm_clocks {
+ clk_32768_ck: clock-clk-32768 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "clk_32768_ck";
+ clock-frequency = <32768>;
+ };
+
+ clk_rc32k_ck: clock-clk-rc32k {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "clk_rc32k_ck";
+ clock-frequency = <32000>;
+ };
+
+ virt_19200000_ck: clock-virt-19200000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_19200000_ck";
+ clock-frequency = <19200000>;
+ };
+
+ virt_24000000_ck: clock-virt-24000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_24000000_ck";
+ clock-frequency = <24000000>;
+ };
+
+ virt_25000000_ck: clock-virt-25000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_25000000_ck";
+ clock-frequency = <25000000>;
+ };
+
+ virt_26000000_ck: clock-virt-26000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_26000000_ck";
+ clock-frequency = <26000000>;
+ };
+
+ tclkin_ck: clock-tclkin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "tclkin_ck";
+ clock-frequency = <12000000>;
+ };
+
+ dpll_core_ck: clock@490 {
+ #clock-cells = <0>;
+ compatible = "ti,am3-dpll-core-clock";
+ clock-output-names = "dpll_core_ck";
+ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+ reg = <0x0490>, <0x045c>, <0x0468>, <0x0460>, <0x0464>;
+ };
+
+ dpll_core_x2_ck: clock-dpll-core-x2 {
+ #clock-cells = <0>;
+ compatible = "ti,am3-dpll-x2-clock";
+ clock-output-names = "dpll_core_x2_ck";
+ clocks = <&dpll_core_ck>;
+ };
+
+ dpll_core_m4_ck: clock-dpll-core-m4@480 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m4_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <31>;
+ reg = <0x0480>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_core_m5_ck: clock-dpll-core-m5@484 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m5_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <31>;
+ reg = <0x0484>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_core_m6_ck: clock-dpll-core-m6@4d8 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m6_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <31>;
+ reg = <0x04d8>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_mpu_ck: clock@488 {
+ #clock-cells = <0>;
+ compatible = "ti,am3-dpll-clock";
+ clock-output-names = "dpll_mpu_ck";
+ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+ reg = <0x0488>, <0x0420>, <0x042c>, <0x0424>, <0x0428>;
+ };
+
+ dpll_mpu_m2_ck: clock-dpll-mpu-m2@4a8 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_mpu_m2_ck";
+ clocks = <&dpll_mpu_ck>;
+ ti,max-div = <31>;
+ reg = <0x04a8>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_ddr_ck: clock@494 {
+ #clock-cells = <0>;
+ compatible = "ti,am3-dpll-no-gate-clock";
+ clock-output-names = "dpll_ddr_ck";
+ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+ reg = <0x0494>, <0x0434>, <0x0440>, <0x0438>, <0x043c>;
+ };
+
+ dpll_ddr_m2_ck: clock-dpll-ddr-m2@4a0 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_ddr_m2_ck";
+ clocks = <&dpll_ddr_ck>;
+ ti,max-div = <31>;
+ reg = <0x04a0>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_ddr_m2_div2_ck: clock-dpll-ddr-m2-div2 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_ddr_m2_div2_ck";
+ clocks = <&dpll_ddr_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ dpll_disp_ck: clock@498 {
+ #clock-cells = <0>;
+ compatible = "ti,am3-dpll-no-gate-clock";
+ clock-output-names = "dpll_disp_ck";
+ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+ reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>;
+ };
+
+ dpll_disp_m2_ck: clock-dpll-disp-m2@4a4 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_disp_m2_ck";
+ clocks = <&dpll_disp_ck>;
+ ti,max-div = <31>;
+ reg = <0x04a4>;
+ ti,index-starts-at-one;
+ ti,set-rate-parent;
+ };
+
+ dpll_per_ck: clock@48c {
+ #clock-cells = <0>;
+ compatible = "ti,am3-dpll-no-gate-j-type-clock";
+ clock-output-names = "dpll_per_ck";
+ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+ reg = <0x048c>, <0x0470>, <0x049c>, <0x0474>, <0x0478>;
+ };
+
+ dpll_per_m2_ck: clock-dpll-per-m2@4ac {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m2_ck";
+ clocks = <&dpll_per_ck>;
+ ti,max-div = <31>;
+ reg = <0x04ac>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_per_m2_div4_wkupdm_ck";
+ clocks = <&dpll_per_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_per_m2_div4_ck";
+ clocks = <&dpll_per_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ clk_24mhz: clock-clk-24mhz {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "clk_24mhz";
+ clocks = <&dpll_per_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <8>;
+ };
+
+ clkdiv32k_ck: clock-clkdiv32k {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "clkdiv32k_ck";
+ clocks = <&clk_24mhz>;
+ clock-mult = <1>;
+ clock-div = <732>;
+ };
+
+ l3_gclk: clock-l3-gclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "l3_gclk";
+ clocks = <&dpll_core_m4_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ pruss_ocp_gclk: clock-pruss-ocp-gclk@530 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "pruss_ocp_gclk";
+ clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
+ reg = <0x0530>;
+ };
+
+ mmu_fck: clock-mmu-fck-1@914 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "mmu_fck";
+ clocks = <&dpll_core_m4_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0914>;
+ };
+
+ timer1_fck: clock-timer1-fck@528 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer1_fck";
+ clocks = <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
+ reg = <0x0528>;
+ };
+
+ timer2_fck: clock-timer2-fck@508 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer2_fck";
+ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+ reg = <0x0508>;
+ };
+
+ timer3_fck: clock-timer3-fck@50c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer3_fck";
+ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+ reg = <0x050c>;
+ };
+
+ timer4_fck: clock-timer4-fck@510 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer4_fck";
+ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+ reg = <0x0510>;
+ };
+
+ timer5_fck: clock-timer5-fck@518 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer5_fck";
+ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+ reg = <0x0518>;
+ };
+
+ timer6_fck: clock-timer6-fck@51c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer6_fck";
+ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+ reg = <0x051c>;
+ };
+
+ timer7_fck: clock-timer7-fck@504 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer7_fck";
+ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+ reg = <0x0504>;
+ };
+
+ usbotg_fck: clock-usbotg-fck-8@47c {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "usbotg_fck";
+ clocks = <&dpll_per_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x047c>;
+ };
+
+ dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_core_m4_div2_ck";
+ clocks = <&dpll_core_m4_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ ieee5000_fck: clock-ieee5000-fck-1@e4 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "ieee5000_fck";
+ clocks = <&dpll_core_m4_div2_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x00e4>;
+ };
+
+ wdt1_fck: clock-wdt1-fck@538 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "wdt1_fck";
+ clocks = <&clk_rc32k_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+ reg = <0x0538>;
+ };
+
+ l4_rtc_gclk: clock-l4-rtc-gclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "l4_rtc_gclk";
+ clocks = <&dpll_core_m4_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ l4hs_gclk: clock-l4hs-gclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "l4hs_gclk";
+ clocks = <&dpll_core_m4_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ l3s_gclk: clock-l3s-gclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "l3s_gclk";
+ clocks = <&dpll_core_m4_div2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ l4fw_gclk: clock-l4fw-gclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "l4fw_gclk";
+ clocks = <&dpll_core_m4_div2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ l4ls_gclk: clock-l4ls-gclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "l4ls_gclk";
+ clocks = <&dpll_core_m4_div2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ sysclk_div_ck: clock-sysclk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "sysclk_div_ck";
+ clocks = <&dpll_core_m4_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "cpsw_125mhz_gclk";
+ clocks = <&dpll_core_m5_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@520 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "cpsw_cpts_rft_clk";
+ clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
+ reg = <0x0520>;
+ };
+
+ gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@53c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "gpio0_dbclk_mux_ck";
+ clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+ reg = <0x053c>;
+ };
+
+ lcd_gclk: clock-lcd-gclk@534 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "lcd_gclk";
+ clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
+ reg = <0x0534>;
+ ti,set-rate-parent;
+ };
+
+ mmc_clk: clock-mmc {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "mmc_clk";
+ clocks = <&dpll_per_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ clock@52c {
+ compatible = "ti,clksel";
+ reg = <0x52c>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ gfx_fclk_clksel_ck: clock-gfx-fclk-clksel {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "gfx_fclk_clksel_ck";
+ clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
+ ti,bit-shift = <1>;
+ };
+
+ gfx_fck_div_ck: clock-gfx-fck-div {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "gfx_fck_div_ck";
+ clocks = <&gfx_fclk_clksel_ck>;
+ ti,max-div = <2>;
+ };
+ };
+
+ clock@700 {
+ compatible = "ti,clksel";
+ reg = <0x700>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ sysclkout_pre_ck: clock-sysclkout-pre {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "sysclkout_pre_ck";
+ clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
+ };
+
+ clkout2_div_ck: clock-clkout2-div {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "clkout2_div_ck";
+ clocks = <&sysclkout_pre_ck>;
+ ti,bit-shift = <3>;
+ ti,max-div = <8>;
+ };
+
+ clkout2_ck: clock-clkout2 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "clkout2_ck";
+ clocks = <&clkout2_div_ck>;
+ ti,bit-shift = <7>;
+ };
+ };
+};
+
+&prcm {
+ per_cm: clock@0 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "per_cm";
+ reg = <0x0 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x400>;
+
+ l4ls_clkctrl: clock@38 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4ls_clkctrl";
+ reg = <0x38 0x2c>, <0x6c 0x28>, <0xac 0xc>, <0xc0 0x1c>, <0xec 0xc>, <0x10c 0x8>, <0x130 0x4>;
+ #clock-cells = <2>;
+ };
+
+ l3s_clkctrl: clock@1c {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3s_clkctrl";
+ reg = <0x1c 0x4>, <0x30 0x8>, <0x68 0x4>, <0xf8 0x4>;
+ #clock-cells = <2>;
+ };
+
+ l3_clkctrl: clock@24 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3_clkctrl";
+ reg = <0x24 0xc>, <0x94 0x10>, <0xbc 0x4>, <0xdc 0x8>, <0xfc 0x8>;
+ #clock-cells = <2>;
+ };
+
+ l4hs_clkctrl: clock@120 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4hs_clkctrl";
+ reg = <0x120 0x4>;
+ #clock-cells = <2>;
+ };
+
+ pruss_ocp_clkctrl: clock@e8 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "pruss_ocp_clkctrl";
+ reg = <0xe8 0x4>;
+ #clock-cells = <2>;
+ };
+
+ cpsw_125mhz_clkctrl: clock@0 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "cpsw_125mhz_clkctrl";
+ reg = <0x0 0x18>;
+ #clock-cells = <2>;
+ };
+
+ lcdc_clkctrl: clock@18 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "lcdc_clkctrl";
+ reg = <0x18 0x4>;
+ #clock-cells = <2>;
+ };
+
+ clk_24mhz_clkctrl: clock@14c {
+ compatible = "ti,clkctrl";
+ clock-output-names = "clk_24mhz_clkctrl";
+ reg = <0x14c 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ wkup_cm: clock@400 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "wkup_cm";
+ reg = <0x400 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x400 0x100>;
+
+ l4_wkup_clkctrl: clock@0 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4_wkup_clkctrl";
+ reg = <0x0 0x10>, <0xb4 0x24>;
+ #clock-cells = <2>;
+ };
+
+ l3_aon_clkctrl: clock@14 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3_aon_clkctrl";
+ reg = <0x14 0x4>;
+ #clock-cells = <2>;
+ };
+
+ l4_wkup_aon_clkctrl: clock@b0 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4_wkup_aon_clkctrl";
+ reg = <0xb0 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ mpu_cm: clock@600 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "mpu_cm";
+ reg = <0x600 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x600 0x100>;
+
+ mpu_clkctrl: clock@0 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "mpu_clkctrl";
+ reg = <0x0 0x8>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l4_rtc_cm: clock@800 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l4_rtc_cm";
+ reg = <0x800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x800 0x100>;
+
+ l4_rtc_clkctrl: clock@0 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4_rtc_clkctrl";
+ reg = <0x0 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ gfx_l3_cm: clock@900 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "gfx_l3_cm";
+ reg = <0x900 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x900 0x100>;
+
+ gfx_l3_clkctrl: clock@0 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "gfx_l3_clkctrl";
+ reg = <0x0 0x8>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l4_cefuse_cm: clock@a00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l4_cefuse_cm";
+ reg = <0xa00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xa00 0x100>;
+
+ l4_cefuse_clkctrl: clock@0 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4_cefuse_clkctrl";
+ reg = <0x0 0x24>;
+ #clock-cells = <2>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/am33xx-l4.dtsi b/src/arm/ti/omap/am33xx-l4.dtsi
new file mode 100644
index 0000000..d6a143a
--- /dev/null
+++ b/src/arm/ti/omap/am33xx-l4.dtsi
@@ -0,0 +1,2322 @@
+&l4_wkup { /* 0x44c00000 */
+ compatible = "ti,am33xx-l4-wkup", "simple-pm-bus";
+ power-domains = <&prm_wkup>;
+ clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_L4_WKUP_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x44c00000 0x800>,
+ <0x44c00800 0x800>,
+ <0x44c01000 0x400>,
+ <0x44c01400 0x400>;
+ reg-names = "ap", "la", "ia0", "ia1";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x44c00000 0x100000>, /* segment 0 */
+ <0x00100000 0x44d00000 0x100000>, /* segment 1 */
+ <0x00200000 0x44e00000 0x100000>; /* segment 2 */
+
+ segment@0 { /* 0x44c00000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00000800 0x00000800 0x000800>, /* ap 1 */
+ <0x00001000 0x00001000 0x000400>, /* ap 2 */
+ <0x00001400 0x00001400 0x000400>; /* ap 3 */
+ };
+
+ segment@100000 { /* 0x44d00000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00100000 0x004000>, /* ap 4 */
+ <0x00004000 0x00104000 0x001000>, /* ap 5 */
+ <0x00080000 0x00180000 0x002000>, /* ap 6 */
+ <0x00082000 0x00182000 0x001000>; /* ap 7 */
+
+ target-module@0 { /* 0x44d00000, ap 4 28.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x0 0x4>;
+ reg-names = "rev";
+ clocks = <&l4_wkup_aon_clkctrl AM3_L4_WKUP_AON_WKUP_M3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x4000>,
+ <0x00080000 0x00080000 0x2000>;
+
+ wkup_m3: cpu@0 {
+ compatible = "ti,am3352-wkup-m3";
+ reg = <0x00000000 0x4000>,
+ <0x00080000 0x2000>;
+ reg-names = "umem", "dmem";
+ resets = <&prm_wkup 3>;
+ reset-names = "rstctrl";
+ ti,pm-firmware = "am335x-pm-firmware.elf";
+ };
+ };
+ };
+
+ segment@200000 { /* 0x44e00000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00200000 0x002000>, /* ap 8 */
+ <0x00002000 0x00202000 0x001000>, /* ap 9 */
+ <0x00003000 0x00203000 0x001000>, /* ap 10 */
+ <0x00004000 0x00204000 0x001000>, /* ap 11 */
+ <0x00005000 0x00205000 0x001000>, /* ap 12 */
+ <0x00006000 0x00206000 0x001000>, /* ap 13 */
+ <0x00007000 0x00207000 0x001000>, /* ap 14 */
+ <0x00008000 0x00208000 0x001000>, /* ap 15 */
+ <0x00009000 0x00209000 0x001000>, /* ap 16 */
+ <0x0000a000 0x0020a000 0x001000>, /* ap 17 */
+ <0x0000b000 0x0020b000 0x001000>, /* ap 18 */
+ <0x0000c000 0x0020c000 0x001000>, /* ap 19 */
+ <0x0000d000 0x0020d000 0x001000>, /* ap 20 */
+ <0x0000f000 0x0020f000 0x001000>, /* ap 21 */
+ <0x00010000 0x00210000 0x010000>, /* ap 22 */
+ <0x00020000 0x00220000 0x010000>, /* ap 23 */
+ <0x00030000 0x00230000 0x001000>, /* ap 24 */
+ <0x00031000 0x00231000 0x001000>, /* ap 25 */
+ <0x00032000 0x00232000 0x001000>, /* ap 26 */
+ <0x00033000 0x00233000 0x001000>, /* ap 27 */
+ <0x00034000 0x00234000 0x001000>, /* ap 28 */
+ <0x00035000 0x00235000 0x001000>, /* ap 29 */
+ <0x00036000 0x00236000 0x001000>, /* ap 30 */
+ <0x00037000 0x00237000 0x001000>, /* ap 31 */
+ <0x00038000 0x00238000 0x001000>, /* ap 32 */
+ <0x00039000 0x00239000 0x001000>, /* ap 33 */
+ <0x0003a000 0x0023a000 0x001000>, /* ap 34 */
+ <0x0003e000 0x0023e000 0x001000>, /* ap 35 */
+ <0x0003f000 0x0023f000 0x001000>, /* ap 36 */
+ <0x0000e000 0x0020e000 0x001000>, /* ap 37 */
+ <0x00040000 0x00240000 0x040000>, /* ap 38 */
+ <0x00080000 0x00280000 0x001000>; /* ap 39 */
+
+ target-module@0 { /* 0x44e00000, ap 8 58.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x2000>;
+
+ prcm: prcm@0 {
+ compatible = "ti,am3-prcm", "simple-bus";
+ reg = <0 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x2000>;
+
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prcm_clockdomains: clockdomains {
+ };
+ };
+ };
+
+ target-module@3000 { /* 0x44e03000, ap 10 0a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3000 0x1000>;
+ };
+
+ target-module@5000 { /* 0x44e05000, ap 12 30.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5000 0x1000>;
+ };
+
+ gpio0_target: target-module@7000 { /* 0x44e07000, ap 14 20.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x7000 0x4>,
+ <0x7010 0x4>,
+ <0x7114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 0>,
+ <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 18>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7000 0x1000>;
+
+ gpio0: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ gpio-ranges = <&am33xx_pinmux 0 82 8>,
+ <&am33xx_pinmux 8 52 4>,
+ <&am33xx_pinmux 12 94 4>,
+ <&am33xx_pinmux 16 71 2>,
+ <&am33xx_pinmux 18 135 1>,
+ <&am33xx_pinmux 19 108 2>,
+ <&am33xx_pinmux 21 73 1>,
+ <&am33xx_pinmux 22 8 2>,
+ <&am33xx_pinmux 26 10 2>,
+ <&am33xx_pinmux 28 74 1>,
+ <&am33xx_pinmux 29 81 1>,
+ <&am33xx_pinmux 30 28 2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x1000>;
+ interrupts = <96>;
+ };
+ };
+
+ target-module@9000 { /* 0x44e09000, ap 16 04.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x9050 0x4>,
+ <0x9054 0x4>,
+ <0x9058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_UART1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x9000 0x1000>;
+
+ uart0: serial@0 {
+ compatible = "ti,am3352-uart", "ti,omap3-uart";
+ clock-frequency = <48000000>;
+ reg = <0x0 0x1000>;
+ interrupts = <72>;
+ status = "disabled";
+ dmas = <&edma 26 0>, <&edma 27 0>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@b000 { /* 0x44e0b000, ap 18 48.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xb000 0x8>,
+ <0xb010 0x8>,
+ <0xb090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_I2C1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb000 0x1000>;
+
+ i2c0: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x1000>;
+ interrupts = <70>;
+ status = "disabled";
+ };
+ };
+
+ target-module@d000 { /* 0x44e0d000, ap 20 38.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xd000 0x4>,
+ <0xd010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_ADC_TSC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x0000d000 0x00001000>,
+ <0x00001000 0x0000e000 0x00001000>;
+
+ tscadc: tscadc@0 {
+ compatible = "ti,am3359-tscadc";
+ reg = <0x0 0x1000>;
+ interrupts = <16>;
+ clocks = <&adc_tsc_fck>;
+ clock-names = "fck";
+ status = "disabled";
+ dmas = <&edma 53 0>, <&edma 57 0>;
+ dma-names = "fifo0", "fifo1";
+
+ tsc {
+ compatible = "ti,am3359-tsc";
+ };
+ am335x_adc: adc {
+ #io-channel-cells = <1>;
+ compatible = "ti,am3359-adc";
+ };
+ };
+ };
+
+ target-module@10000 { /* 0x44e10000, ap 22 0c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x10000 0x4>;
+ reg-names = "rev";
+ clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_CONTROL_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00010000 0x00010000>,
+ <0x00010000 0x00020000 0x00010000>;
+
+ scm: scm@0 {
+ compatible = "ti,am3-scm", "simple-bus";
+ reg = <0x0 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #pinctrl-cells = <1>;
+ ranges = <0 0 0x2000>;
+
+ am33xx_pinmux: pinmux@800 {
+ compatible = "pinctrl-single";
+ reg = <0x800 0x238>;
+ #pinctrl-cells = <2>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x7f>;
+ };
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon", "simple-bus";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x800>;
+
+ phy_gmii_sel: phy-gmii-sel {
+ compatible = "ti,am3352-phy-gmii-sel";
+ reg = <0x650 0x4>;
+ #phy-cells = <2>;
+ };
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ usb_ctrl_mod: control@620 {
+ compatible = "ti,am335x-usb-ctrl-module";
+ reg = <0x620 0x10>,
+ <0x648 0x4>;
+ reg-names = "phy_ctrl", "wakeup";
+ };
+
+ wkup_m3_ipc: wkup_m3_ipc@1324 {
+ compatible = "ti,am3352-wkup-m3-ipc";
+ reg = <0x1324 0x24>;
+ interrupts = <78>;
+ ti,rproc = <&wkup_m3>;
+ mboxes = <&mailbox &mbox_wkupm3>;
+ };
+
+ edma_xbar: dma-router@f90 {
+ compatible = "ti,am335x-edma-crossbar";
+ reg = <0xf90 0x40>;
+ #dma-cells = <3>;
+ dma-requests = <32>;
+ dma-masters = <&edma>;
+ };
+
+ scm_clockdomains: clockdomains {
+ };
+ };
+ };
+
+ timer1_target: target-module@31000 { /* 0x44e31000, ap 25 40.0 */
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x31000 0x4>,
+ <0x31010 0x4>,
+ <0x31014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_TIMER1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x31000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,am335x-timer-1ms";
+ reg = <0x0 0x400>;
+ interrupts = <67>;
+ ti,timer-alwon;
+ clocks = <&timer1_fck>;
+ clock-names = "fck";
+ };
+ };
+
+ target-module@33000 { /* 0x44e33000, ap 27 18.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x33000 0x1000>;
+ };
+
+ target-module@35000 { /* 0x44e35000, ap 29 50.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x35000 0x4>,
+ <0x35010 0x4>,
+ <0x35014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_WD_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x35000 0x1000>;
+
+ wdt2: wdt@0 {
+ compatible = "ti,omap3-wdt";
+ reg = <0x0 0x1000>;
+ interrupts = <91>;
+ };
+ };
+
+ target-module@37000 { /* 0x44e37000, ap 31 08.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x37000 0x1000>;
+ };
+
+ target-module@39000 { /* 0x44e39000, ap 33 02.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x39000 0x1000>;
+ };
+
+ target-module@3e000 { /* 0x44e3e000, ap 35 60.0 */
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x3e074 0x4>,
+ <0x3e078 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */
+ power-domains = <&prm_rtc>;
+ clocks = <&l4_rtc_clkctrl AM3_L4_RTC_RTC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3e000 0x1000>;
+
+ rtc: rtc@0 {
+ compatible = "ti,am3352-rtc", "ti,da830-rtc";
+ reg = <0x0 0x1000>;
+ interrupts = <75>,
+ <76>;
+ };
+ };
+
+ target-module@40000 { /* 0x44e40000, ap 38 68.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x40000 0x40000>;
+ };
+ };
+};
+
+&l4_fw { /* 0x47c00000 */
+ compatible = "ti,am33xx-l4-fw", "simple-bus";
+ reg = <0x47c00000 0x800>,
+ <0x47c00800 0x800>,
+ <0x47c01000 0x400>;
+ reg-names = "ap", "la", "ia0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x47c00000 0x1000000>; /* segment 0 */
+
+ segment@0 { /* 0x47c00000 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00000800 0x00000800 0x000800>, /* ap 1 */
+ <0x00001000 0x00001000 0x000400>, /* ap 2 */
+ <0x0000c000 0x0000c000 0x001000>, /* ap 3 */
+ <0x0000d000 0x0000d000 0x001000>, /* ap 4 */
+ <0x0000e000 0x0000e000 0x001000>, /* ap 5 */
+ <0x0000f000 0x0000f000 0x001000>, /* ap 6 */
+ <0x00010000 0x00010000 0x001000>, /* ap 7 */
+ <0x00011000 0x00011000 0x001000>, /* ap 8 */
+ <0x0001a000 0x0001a000 0x001000>, /* ap 9 */
+ <0x0001b000 0x0001b000 0x001000>, /* ap 10 */
+ <0x00024000 0x00024000 0x001000>, /* ap 11 */
+ <0x00025000 0x00025000 0x001000>, /* ap 12 */
+ <0x00026000 0x00026000 0x001000>, /* ap 13 */
+ <0x00027000 0x00027000 0x001000>, /* ap 14 */
+ <0x00030000 0x00030000 0x001000>, /* ap 15 */
+ <0x00031000 0x00031000 0x001000>, /* ap 16 */
+ <0x00038000 0x00038000 0x001000>, /* ap 17 */
+ <0x00039000 0x00039000 0x001000>, /* ap 18 */
+ <0x0003a000 0x0003a000 0x001000>, /* ap 19 */
+ <0x0003b000 0x0003b000 0x001000>, /* ap 20 */
+ <0x0003e000 0x0003e000 0x001000>, /* ap 21 */
+ <0x0003f000 0x0003f000 0x001000>, /* ap 22 */
+ <0x0003c000 0x0003c000 0x001000>, /* ap 23 */
+ <0x00040000 0x00040000 0x001000>, /* ap 24 */
+ <0x00046000 0x00046000 0x001000>, /* ap 25 */
+ <0x00047000 0x00047000 0x001000>, /* ap 26 */
+ <0x00044000 0x00044000 0x001000>, /* ap 27 */
+ <0x00045000 0x00045000 0x001000>, /* ap 28 */
+ <0x00028000 0x00028000 0x001000>, /* ap 29 */
+ <0x00029000 0x00029000 0x001000>, /* ap 30 */
+ <0x00032000 0x00032000 0x001000>, /* ap 31 */
+ <0x00033000 0x00033000 0x001000>, /* ap 32 */
+ <0x0003d000 0x0003d000 0x001000>, /* ap 33 */
+ <0x00041000 0x00041000 0x001000>, /* ap 34 */
+ <0x00042000 0x00042000 0x001000>, /* ap 35 */
+ <0x00043000 0x00043000 0x001000>, /* ap 36 */
+ <0x00014000 0x00014000 0x001000>, /* ap 37 */
+ <0x00015000 0x00015000 0x001000>; /* ap 38 */
+
+ target-module@c000 { /* 0x47c0c000, ap 3 04.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc000 0x1000>;
+ };
+
+ target-module@e000 { /* 0x47c0e000, ap 5 0c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe000 0x1000>;
+ };
+
+ target-module@10000 { /* 0x47c10000, ap 7 20.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000 0x1000>;
+ };
+
+ target-module@14000 { /* 0x47c14000, ap 37 3c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x14000 0x1000>;
+ };
+
+ target-module@1a000 { /* 0x47c1a000, ap 9 08.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1a000 0x1000>;
+ };
+
+ target-module@24000 { /* 0x47c24000, ap 11 28.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x24000 0x1000>;
+ };
+
+ target-module@26000 { /* 0x47c26000, ap 13 30.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x1000>;
+ };
+
+ target-module@28000 { /* 0x47c28000, ap 29 40.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x28000 0x1000>;
+ };
+
+ target-module@30000 { /* 0x47c30000, ap 15 14.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x30000 0x1000>;
+ };
+
+ target-module@32000 { /* 0x47c32000, ap 31 06.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x32000 0x1000>;
+ };
+
+ target-module@38000 { /* 0x47c38000, ap 17 18.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x38000 0x1000>;
+ };
+
+ target-module@3a000 { /* 0x47c3a000, ap 19 1c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3a000 0x1000>;
+ };
+
+ target-module@3c000 { /* 0x47c3c000, ap 23 38.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3c000 0x1000>;
+ };
+
+ target-module@3e000 { /* 0x47c3e000, ap 21 10.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3e000 0x1000>;
+ };
+
+ target-module@40000 { /* 0x47c40000, ap 24 02.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x40000 0x1000>;
+ };
+
+ target-module@42000 { /* 0x47c42000, ap 35 34.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x42000 0x1000>;
+ };
+
+ target-module@44000 { /* 0x47c44000, ap 27 24.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x44000 0x1000>;
+ };
+
+ target-module@46000 { /* 0x47c46000, ap 25 2c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x46000 0x1000>;
+ };
+ };
+};
+
+&l4_fast { /* 0x4a000000 */
+ compatible = "ti,am33xx-l4-fast", "simple-pm-bus";
+ power-domains = <&prm_per>;
+ clocks = <&l4hs_clkctrl AM3_L4HS_L4_HS_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x4a000000 0x800>,
+ <0x4a000800 0x800>,
+ <0x4a001000 0x400>;
+ reg-names = "ap", "la", "ia0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4a000000 0x1000000>; /* segment 0 */
+
+ segment@0 { /* 0x4a000000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00000800 0x00000800 0x000800>, /* ap 1 */
+ <0x00001000 0x00001000 0x000400>, /* ap 2 */
+ <0x00100000 0x00100000 0x008000>, /* ap 3 */
+ <0x00108000 0x00108000 0x001000>, /* ap 4 */
+ <0x00180000 0x00180000 0x020000>, /* ap 5 */
+ <0x001a0000 0x001a0000 0x001000>, /* ap 6 */
+ <0x00200000 0x00200000 0x080000>, /* ap 7 */
+ <0x00280000 0x00280000 0x001000>, /* ap 8 */
+ <0x00300000 0x00300000 0x080000>, /* ap 9 */
+ <0x00380000 0x00380000 0x001000>; /* ap 10 */
+
+ target-module@100000 { /* 0x4a100000, ap 3 08.0 */
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x101200 0x4>,
+ <0x101208 0x4>,
+ <0x101204 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <0>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ ti,syss-mask = <1>;
+ clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x100000 0x8000>;
+
+ mac: ethernet@0 {
+ compatible = "ti,am335x-cpsw","ti,cpsw";
+ clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+ clock-names = "fck", "cpts";
+ cpdma_channels = <8>;
+ ale_entries = <1024>;
+ bd_ram_size = <0x2000>;
+ mac_control = <0x20>;
+ slaves = <2>;
+ active_slave = <0>;
+ cpts_clock_mult = <0x80000000>;
+ cpts_clock_shift = <29>;
+ reg = <0x0 0x800
+ 0x1200 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * c0_rx_thresh_pend
+ * c0_rx_pend
+ * c0_tx_pend
+ * c0_misc_pend
+ */
+ interrupts = <40>, <41>, <42>, <43>;
+ ranges = <0 0 0x8000>;
+ syscon = <&scm_conf>;
+ status = "disabled";
+
+ davinci_mdio: mdio@1000 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus_freq = <1000000>;
+ reg = <0x1000 0x100>;
+ status = "disabled";
+ };
+
+ cpsw_emac0: slave@200 {
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1 1>;
+ };
+
+ cpsw_emac1: slave@300 {
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2 1>;
+ };
+ };
+
+ mac_sw: switch@0 {
+ compatible = "ti,am335x-cpsw-switch", "ti,cpsw-switch";
+ reg = <0x0 0x4000>;
+ ranges = <0 0 0x4000>;
+ clocks = <&cpsw_125mhz_gclk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ syscon = <&scm_conf>;
+ status = "disabled";
+
+ interrupts = <40>, <41>, <42>, <43>;
+ interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpsw_port1: port@1 {
+ reg = <1>;
+ label = "port1";
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1 1>;
+ };
+
+ cpsw_port2: port@2 {
+ reg = <2>;
+ label = "port2";
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2 1>;
+ };
+ };
+
+ davinci_mdio_sw: mdio@1000 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ clocks = <&cpsw_125mhz_gclk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus_freq = <1000000>;
+ reg = <0x1000 0x100>;
+ };
+
+ cpts {
+ clocks = <&cpsw_cpts_rft_clk>;
+ clock-names = "cpts";
+ };
+ };
+ };
+
+ target-module@180000 { /* 0x4a180000, ap 5 10.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x180000 0x20000>;
+ };
+
+ target-module@200000 { /* 0x4a200000, ap 7 02.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x200000 0x80000>;
+ };
+
+ pruss_tm: target-module@300000 { /* 0x4a300000, ap 9 04.0 */
+ compatible = "ti,sysc-pruss", "ti,sysc";
+ reg = <0x326000 0x4>,
+ <0x326004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+ SYSC_PRUSS_SUB_MWAIT)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&pruss_ocp_clkctrl AM3_PRUSS_OCP_PRUSS_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_per 1>;
+ reset-names = "rstctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x300000 0x80000>;
+ status = "disabled";
+
+ pruss: pruss@0 {
+ compatible = "ti,am3356-pruss";
+ reg = <0x0 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pruss_mem: memories@0 {
+ reg = <0x0 0x2000>,
+ <0x2000 0x2000>,
+ <0x10000 0x3000>;
+ reg-names = "dram0", "dram1",
+ "shrdram2";
+ };
+
+ pruss_cfg: cfg@26000 {
+ compatible = "ti,pruss-cfg", "syscon";
+ reg = <0x26000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x2000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pruss_iepclk_mux: iepclk-mux@30 {
+ reg = <0x30>;
+ #clock-cells = <0>;
+ clocks = <&l3_gclk>, /* icss_iep_gclk */
+ <&pruss_ocp_gclk>; /* icss_ocp_gclk */
+ };
+ };
+ };
+
+ pruss_mii_rt: mii-rt@32000 {
+ compatible = "ti,pruss-mii", "syscon";
+ reg = <0x32000 0x58>;
+ };
+
+ pruss_intc: interrupt-controller@20000 {
+ compatible = "ti,pruss-intc";
+ reg = <0x20000 0x2000>;
+ interrupts = <20>, <21>, <22>, <23>, <24>, <25>, <26>, <27>;
+ interrupt-names = "host_intr0", "host_intr1",
+ "host_intr2", "host_intr3",
+ "host_intr4", "host_intr5",
+ "host_intr6", "host_intr7";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ pru0: pru@34000 {
+ compatible = "ti,am3356-pru";
+ reg = <0x34000 0x2000>,
+ <0x22000 0x400>,
+ <0x22400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am335x-pru0-fw";
+ };
+
+ pru1: pru@38000 {
+ compatible = "ti,am3356-pru";
+ reg = <0x38000 0x2000>,
+ <0x24000 0x400>,
+ <0x24400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am335x-pru1-fw";
+ };
+
+ pruss_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ reg = <0x32400 0x90>;
+ clocks = <&dpll_core_m4_ck>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+ };
+ };
+};
+
+&l4_mpuss { /* 0x4b140000 */
+ compatible = "ti,am33xx-l4-mpuss", "simple-bus";
+ reg = <0x4b144400 0x100>,
+ <0x4b144800 0x400>;
+ reg-names = "la", "ap";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4b140000 0x008000>; /* segment 0 */
+
+ segment@0 { /* 0x4b140000 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00004800 0x00004800 0x000400>, /* ap 0 */
+ <0x00001000 0x00001000 0x001000>, /* ap 1 */
+ <0x00002000 0x00002000 0x001000>, /* ap 2 */
+ <0x00004000 0x00004000 0x000400>, /* ap 3 */
+ <0x00005000 0x00005000 0x000400>, /* ap 4 */
+ <0x00000000 0x00000000 0x001000>, /* ap 5 */
+ <0x00003000 0x00003000 0x001000>, /* ap 6 */
+ <0x00000800 0x00000800 0x000800>; /* ap 7 */
+
+ target-module@0 { /* 0x4b140000, ap 5 02.2 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x00001000>,
+ <0x00001000 0x00001000 0x00001000>,
+ <0x00002000 0x00002000 0x00001000>;
+ };
+
+ target-module@3000 { /* 0x4b143000, ap 6 04.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3000 0x1000>;
+ };
+ };
+};
+
+&l4_per { /* 0x48000000 */
+ compatible = "ti,am33xx-l4-per", "simple-pm-bus";
+ power-domains = <&prm_per>;
+ clocks = <&l4ls_clkctrl AM3_L4LS_L4_LS_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x48000000 0x800>,
+ <0x48000800 0x800>,
+ <0x48001000 0x400>,
+ <0x48001400 0x400>,
+ <0x48001800 0x400>,
+ <0x48001c00 0x400>;
+ reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x48000000 0x100000>, /* segment 0 */
+ <0x00100000 0x48100000 0x100000>, /* segment 1 */
+ <0x00200000 0x48200000 0x100000>, /* segment 2 */
+ <0x00300000 0x48300000 0x100000>, /* segment 3 */
+ <0x46000000 0x46000000 0x400000>, /* l3 data port */
+ <0x46400000 0x46400000 0x400000>; /* l3 data port */
+
+ segment@0 { /* 0x48000000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00000800 0x00000800 0x000800>, /* ap 1 */
+ <0x00001000 0x00001000 0x000400>, /* ap 2 */
+ <0x00001400 0x00001400 0x000400>, /* ap 3 */
+ <0x00001800 0x00001800 0x000400>, /* ap 4 */
+ <0x00001c00 0x00001c00 0x000400>, /* ap 5 */
+ <0x00008000 0x00008000 0x001000>, /* ap 6 */
+ <0x00009000 0x00009000 0x001000>, /* ap 7 */
+ <0x00016000 0x00016000 0x001000>, /* ap 8 */
+ <0x00017000 0x00017000 0x001000>, /* ap 9 */
+ <0x00022000 0x00022000 0x001000>, /* ap 10 */
+ <0x00023000 0x00023000 0x001000>, /* ap 11 */
+ <0x00024000 0x00024000 0x001000>, /* ap 12 */
+ <0x00025000 0x00025000 0x001000>, /* ap 13 */
+ <0x0002a000 0x0002a000 0x001000>, /* ap 14 */
+ <0x0002b000 0x0002b000 0x001000>, /* ap 15 */
+ <0x00038000 0x00038000 0x002000>, /* ap 16 */
+ <0x0003a000 0x0003a000 0x001000>, /* ap 17 */
+ <0x00014000 0x00014000 0x001000>, /* ap 18 */
+ <0x00015000 0x00015000 0x001000>, /* ap 19 */
+ <0x0003c000 0x0003c000 0x002000>, /* ap 20 */
+ <0x0003e000 0x0003e000 0x001000>, /* ap 21 */
+ <0x00040000 0x00040000 0x001000>, /* ap 22 */
+ <0x00041000 0x00041000 0x001000>, /* ap 23 */
+ <0x00042000 0x00042000 0x001000>, /* ap 24 */
+ <0x00043000 0x00043000 0x001000>, /* ap 25 */
+ <0x00044000 0x00044000 0x001000>, /* ap 26 */
+ <0x00045000 0x00045000 0x001000>, /* ap 27 */
+ <0x00046000 0x00046000 0x001000>, /* ap 28 */
+ <0x00047000 0x00047000 0x001000>, /* ap 29 */
+ <0x00048000 0x00048000 0x001000>, /* ap 30 */
+ <0x00049000 0x00049000 0x001000>, /* ap 31 */
+ <0x0004c000 0x0004c000 0x001000>, /* ap 32 */
+ <0x0004d000 0x0004d000 0x001000>, /* ap 33 */
+ <0x00050000 0x00050000 0x002000>, /* ap 34 */
+ <0x00052000 0x00052000 0x001000>, /* ap 35 */
+ <0x00060000 0x00060000 0x001000>, /* ap 36 */
+ <0x00061000 0x00061000 0x001000>, /* ap 37 */
+ <0x00080000 0x00080000 0x010000>, /* ap 38 */
+ <0x00090000 0x00090000 0x001000>, /* ap 39 */
+ <0x000a0000 0x000a0000 0x010000>, /* ap 40 */
+ <0x000b0000 0x000b0000 0x001000>, /* ap 41 */
+ <0x00030000 0x00030000 0x001000>, /* ap 77 */
+ <0x00031000 0x00031000 0x001000>, /* ap 78 */
+ <0x0004a000 0x0004a000 0x001000>, /* ap 85 */
+ <0x0004b000 0x0004b000 0x001000>, /* ap 86 */
+ <0x000c8000 0x000c8000 0x001000>, /* ap 87 */
+ <0x000c9000 0x000c9000 0x001000>, /* ap 88 */
+ <0x000cc000 0x000cc000 0x001000>, /* ap 89 */
+ <0x000cd000 0x000cd000 0x001000>, /* ap 90 */
+ <0x000ca000 0x000ca000 0x001000>, /* ap 91 */
+ <0x000cb000 0x000cb000 0x001000>, /* ap 92 */
+ <0x46000000 0x46000000 0x400000>, /* l3 data port */
+ <0x46400000 0x46400000 0x400000>; /* l3 data port */
+
+ target-module@8000 { /* 0x48008000, ap 6 10.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8000 0x1000>;
+ };
+
+ target-module@14000 { /* 0x48014000, ap 18 58.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x14000 0x1000>;
+ };
+
+ target-module@16000 { /* 0x48016000, ap 8 3c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x16000 0x1000>;
+ };
+
+ target-module@22000 { /* 0x48022000, ap 10 12.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x22050 0x4>,
+ <0x22054 0x4>,
+ <0x22058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x22000 0x1000>;
+
+ uart1: serial@0 {
+ compatible = "ti,am3352-uart", "ti,omap3-uart";
+ clock-frequency = <48000000>;
+ reg = <0x0 0x1000>;
+ interrupts = <73>;
+ status = "disabled";
+ dmas = <&edma 28 0>, <&edma 29 0>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@24000 { /* 0x48024000, ap 12 14.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x24050 0x4>,
+ <0x24054 0x4>,
+ <0x24058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_UART3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x24000 0x1000>;
+
+ uart2: serial@0 {
+ compatible = "ti,am3352-uart", "ti,omap3-uart";
+ clock-frequency = <48000000>;
+ reg = <0x0 0x1000>;
+ interrupts = <74>;
+ status = "disabled";
+ dmas = <&edma 30 0>, <&edma 31 0>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@2a000 { /* 0x4802a000, ap 14 2a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x2a000 0x8>,
+ <0x2a010 0x8>,
+ <0x2a090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_I2C2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2a000 0x1000>;
+
+ i2c1: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x1000>;
+ interrupts = <71>;
+ status = "disabled";
+ };
+ };
+
+ target-module@30000 { /* 0x48030000, ap 77 08.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x30000 0x4>,
+ <0x30110 0x4>,
+ <0x30114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_SPI0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x30000 0x1000>;
+
+ spi0: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x400>;
+ interrupts = <65>;
+ ti,spi-num-cs = <2>;
+ dmas = <&edma 16 0
+ &edma 17 0
+ &edma 18 0
+ &edma 19 0>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ status = "disabled";
+ };
+ };
+
+ target-module@38000 { /* 0x48038000, ap 16 02.0 */
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x38000 0x4>,
+ <0x38004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): per_pwrdm, l3s_clkdm */
+ clocks = <&l3s_clkctrl AM3_L3S_MCASP0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x38000 0x2000>,
+ <0x46000000 0x46000000 0x400000>;
+
+ mcasp0: mcasp@0 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x2000>,
+ <0x46000000 0x400000>;
+ reg-names = "mpu", "dat";
+ interrupts = <80>, <81>;
+ interrupt-names = "tx", "rx";
+ status = "disabled";
+ dmas = <&edma 8 2>,
+ <&edma 9 2>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@3c000 { /* 0x4803c000, ap 20 32.0 */
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x3c000 0x4>,
+ <0x3c004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): per_pwrdm, l3s_clkdm */
+ clocks = <&l3s_clkctrl AM3_L3S_MCASP1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3c000 0x2000>,
+ <0x46400000 0x46400000 0x400000>;
+
+ mcasp1: mcasp@0 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x2000>,
+ <0x46400000 0x400000>;
+ reg-names = "mpu", "dat";
+ interrupts = <82>, <83>;
+ interrupt-names = "tx", "rx";
+ status = "disabled";
+ dmas = <&edma 10 2>,
+ <&edma 11 2>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ timer2_target: target-module@40000 { /* 0x48040000, ap 22 1e.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x40000 0x4>,
+ <0x40010 0x4>,
+ <0x40014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x40000 0x1000>;
+
+ timer2: timer@0 {
+ compatible = "ti,am335x-timer";
+ reg = <0x0 0x400>;
+ interrupts = <68>;
+ clocks = <&timer2_fck>;
+ clock-names = "fck";
+ };
+ };
+
+ target-module@42000 { /* 0x48042000, ap 24 1c.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x42000 0x4>,
+ <0x42010 0x4>,
+ <0x42014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_TIMER3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x42000 0x1000>;
+
+ timer3: timer@0 {
+ compatible = "ti,am335x-timer";
+ reg = <0x0 0x400>;
+ interrupts = <69>;
+ };
+ };
+
+ target-module@44000 { /* 0x48044000, ap 26 26.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x44000 0x4>,
+ <0x44010 0x4>,
+ <0x44014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_TIMER4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x44000 0x1000>;
+
+ timer4: timer@0 {
+ compatible = "ti,am335x-timer";
+ reg = <0x0 0x400>;
+ interrupts = <92>;
+ ti,timer-pwm;
+ };
+ };
+
+ target-module@46000 { /* 0x48046000, ap 28 28.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x46000 0x4>,
+ <0x46010 0x4>,
+ <0x46014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_TIMER5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x46000 0x1000>;
+
+ timer5: timer@0 {
+ compatible = "ti,am335x-timer";
+ reg = <0x0 0x400>;
+ interrupts = <93>;
+ ti,timer-pwm;
+ };
+ };
+
+ target-module@48000 { /* 0x48048000, ap 30 22.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x48000 0x4>,
+ <0x48010 0x4>,
+ <0x48014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_TIMER6_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x48000 0x1000>;
+
+ timer6: timer@0 {
+ compatible = "ti,am335x-timer";
+ reg = <0x0 0x400>;
+ interrupts = <94>;
+ ti,timer-pwm;
+ };
+ };
+
+ target-module@4a000 { /* 0x4804a000, ap 85 60.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x4a000 0x4>,
+ <0x4a010 0x4>,
+ <0x4a014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_TIMER7_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4a000 0x1000>;
+
+ timer7: timer@0 {
+ compatible = "ti,am335x-timer";
+ reg = <0x0 0x400>;
+ interrupts = <95>;
+ ti,timer-pwm;
+ };
+ };
+
+ target-module@4c000 { /* 0x4804c000, ap 32 36.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4c000 0x4>,
+ <0x4c010 0x4>,
+ <0x4c114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 0>,
+ <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 18>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4c000 0x1000>;
+
+ gpio1: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ gpio-ranges = <&am33xx_pinmux 0 0 8>,
+ <&am33xx_pinmux 8 90 4>,
+ <&am33xx_pinmux 12 12 16>,
+ <&am33xx_pinmux 28 30 4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x1000>;
+ interrupts = <98>;
+ };
+ };
+
+ target-module@50000 { /* 0x48050000, ap 34 2c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x50000 0x2000>;
+ };
+
+ target-module@60000 { /* 0x48060000, ap 36 0c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x602fc 0x4>,
+ <0x60110 0x4>,
+ <0x60114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_MMC1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x60000 0x1000>;
+
+ mmc1: mmc@0 {
+ compatible = "ti,am335-sdhci";
+ ti,needs-special-reset;
+ dmas = <&edma 24 0>, <&edma 25 0>;
+ dma-names = "tx", "rx";
+ interrupts = <64>;
+ reg = <0x0 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ target-module@80000 { /* 0x48080000, ap 38 18.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x80000 0x4>,
+ <0x80010 0x4>,
+ <0x80014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_ELM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000 0x10000>;
+
+ elm: elm@0 {
+ compatible = "ti,am3352-elm";
+ reg = <0x0 0x2000>;
+ interrupts = <4>;
+ status = "disabled";
+ };
+ };
+
+ target-module@a0000 { /* 0x480a0000, ap 40 5e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa0000 0x10000>;
+ };
+
+ target-module@c8000 { /* 0x480c8000, ap 87 06.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xc8000 0x4>,
+ <0xc8010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_MAILBOX_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc8000 0x1000>;
+
+ mailbox: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <77>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <8>;
+ mbox_wkupm3: mbox-wkup-m3 {
+ ti,mbox-send-noirq;
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <0 0 3>;
+ };
+ };
+ };
+
+ target-module@ca000 { /* 0x480ca000, ap 91 40.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xca000 0x4>,
+ <0xca010 0x4>,
+ <0xca014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_SPINLOCK_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xca000 0x1000>;
+
+ hwspinlock: spinlock@0 {
+ compatible = "ti,omap4-hwspinlock";
+ reg = <0x0 0x1000>;
+ #hwlock-cells = <1>;
+ };
+ };
+
+ target-module@cc000 { /* 0x480cc000, ap 89 0e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xcc000 0x1000>;
+ };
+ };
+
+ segment@100000 { /* 0x48100000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0008c000 0x0018c000 0x001000>, /* ap 42 */
+ <0x0008d000 0x0018d000 0x001000>, /* ap 43 */
+ <0x0008e000 0x0018e000 0x001000>, /* ap 44 */
+ <0x0008f000 0x0018f000 0x001000>, /* ap 45 */
+ <0x0009c000 0x0019c000 0x001000>, /* ap 46 */
+ <0x0009d000 0x0019d000 0x001000>, /* ap 47 */
+ <0x000a6000 0x001a6000 0x001000>, /* ap 48 */
+ <0x000a7000 0x001a7000 0x001000>, /* ap 49 */
+ <0x000a8000 0x001a8000 0x001000>, /* ap 50 */
+ <0x000a9000 0x001a9000 0x001000>, /* ap 51 */
+ <0x000aa000 0x001aa000 0x001000>, /* ap 52 */
+ <0x000ab000 0x001ab000 0x001000>, /* ap 53 */
+ <0x000ac000 0x001ac000 0x001000>, /* ap 54 */
+ <0x000ad000 0x001ad000 0x001000>, /* ap 55 */
+ <0x000ae000 0x001ae000 0x001000>, /* ap 56 */
+ <0x000af000 0x001af000 0x001000>, /* ap 57 */
+ <0x000b0000 0x001b0000 0x010000>, /* ap 58 */
+ <0x000c0000 0x001c0000 0x001000>, /* ap 59 */
+ <0x000cc000 0x001cc000 0x002000>, /* ap 60 */
+ <0x000ce000 0x001ce000 0x002000>, /* ap 61 */
+ <0x000d0000 0x001d0000 0x002000>, /* ap 62 */
+ <0x000d2000 0x001d2000 0x002000>, /* ap 63 */
+ <0x000d8000 0x001d8000 0x001000>, /* ap 64 */
+ <0x000d9000 0x001d9000 0x001000>, /* ap 65 */
+ <0x000a0000 0x001a0000 0x001000>, /* ap 79 */
+ <0x000a1000 0x001a1000 0x001000>, /* ap 80 */
+ <0x000a2000 0x001a2000 0x001000>, /* ap 81 */
+ <0x000a3000 0x001a3000 0x001000>, /* ap 82 */
+ <0x000a4000 0x001a4000 0x001000>, /* ap 83 */
+ <0x000a5000 0x001a5000 0x001000>; /* ap 84 */
+
+ target-module@8c000 { /* 0x4818c000, ap 42 04.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8c000 0x1000>;
+ };
+
+ target-module@8e000 { /* 0x4818e000, ap 44 0a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8e000 0x1000>;
+ };
+
+ target-module@9c000 { /* 0x4819c000, ap 46 5a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x9c000 0x8>,
+ <0x9c010 0x8>,
+ <0x9c090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_I2C3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x9c000 0x1000>;
+
+ i2c2: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x1000>;
+ interrupts = <30>;
+ status = "disabled";
+ };
+ };
+
+ target-module@a0000 { /* 0x481a0000, ap 79 24.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xa0000 0x4>,
+ <0xa0110 0x4>,
+ <0xa0114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_SPI1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa0000 0x1000>;
+
+ spi1: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x400>;
+ interrupts = <125>;
+ ti,spi-num-cs = <2>;
+ dmas = <&edma 42 0
+ &edma 43 0
+ &edma 44 0
+ &edma 45 0>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ status = "disabled";
+ };
+ };
+
+ target-module@a2000 { /* 0x481a2000, ap 81 2e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa2000 0x1000>;
+ };
+
+ target-module@a4000 { /* 0x481a4000, ap 83 30.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa4000 0x1000>;
+ };
+
+ target-module@a6000 { /* 0x481a6000, ap 48 16.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xa6050 0x4>,
+ <0xa6054 0x4>,
+ <0xa6058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_UART4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa6000 0x1000>;
+
+ uart3: serial@0 {
+ compatible = "ti,am3352-uart", "ti,omap3-uart";
+ clock-frequency = <48000000>;
+ reg = <0x0 0x1000>;
+ interrupts = <44>;
+ status = "disabled";
+ };
+ };
+
+ target-module@a8000 { /* 0x481a8000, ap 50 20.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xa8050 0x4>,
+ <0xa8054 0x4>,
+ <0xa8058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_UART5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa8000 0x1000>;
+
+ uart4: serial@0 {
+ compatible = "ti,am3352-uart", "ti,omap3-uart";
+ clock-frequency = <48000000>;
+ reg = <0x0 0x1000>;
+ interrupts = <45>;
+ status = "disabled";
+ };
+ };
+
+ target-module@aa000 { /* 0x481aa000, ap 52 1a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xaa050 0x4>,
+ <0xaa054 0x4>,
+ <0xaa058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_UART6_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xaa000 0x1000>;
+
+ uart5: serial@0 {
+ compatible = "ti,am3352-uart", "ti,omap3-uart";
+ clock-frequency = <48000000>;
+ reg = <0x0 0x1000>;
+ interrupts = <46>;
+ status = "disabled";
+ };
+ };
+
+ target-module@ac000 { /* 0x481ac000, ap 54 38.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xac000 0x4>,
+ <0xac010 0x4>,
+ <0xac114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 0>,
+ <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 18>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xac000 0x1000>;
+
+ gpio2: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ gpio-ranges = <&am33xx_pinmux 0 34 18>,
+ <&am33xx_pinmux 18 77 4>,
+ <&am33xx_pinmux 22 56 10>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x1000>;
+ interrupts = <32>;
+ };
+ };
+
+ gpio3_target: target-module@ae000 { /* 0x481ae000, ap 56 3a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xae000 0x4>,
+ <0xae010 0x4>,
+ <0xae114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 0>,
+ <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 18>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xae000 0x1000>;
+
+ gpio3: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ gpio-ranges = <&am33xx_pinmux 0 66 5>,
+ <&am33xx_pinmux 5 98 2>,
+ <&am33xx_pinmux 7 75 2>,
+ <&am33xx_pinmux 13 141 1>,
+ <&am33xx_pinmux 14 100 8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x1000>;
+ interrupts = <62>;
+ };
+ };
+
+ target-module@b0000 { /* 0x481b0000, ap 58 50.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb0000 0x10000>;
+ };
+
+ target-module@cc000 { /* 0x481cc000, ap 60 46.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xcc020 0x4>;
+ reg-names = "rev";
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
+ <&dcan0_fck>;
+ clock-names = "fck", "osc";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xcc000 0x2000>;
+
+ dcan0: can@0 {
+ compatible = "ti,am3352-d_can";
+ reg = <0x0 0x2000>;
+ clocks = <&dcan0_fck>;
+ clock-names = "fck";
+ syscon-raminit = <&scm_conf 0x644 0>;
+ interrupts = <52>;
+ status = "disabled";
+ };
+ };
+
+ target-module@d0000 { /* 0x481d0000, ap 62 42.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xd0020 0x4>;
+ reg-names = "rev";
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
+ <&dcan1_fck>;
+ clock-names = "fck", "osc";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd0000 0x2000>;
+
+ dcan1: can@0 {
+ compatible = "ti,am3352-d_can";
+ reg = <0x0 0x2000>;
+ clocks = <&dcan1_fck>;
+ clock-names = "fck";
+ syscon-raminit = <&scm_conf 0x644 1>;
+ interrupts = <55>;
+ status = "disabled";
+ };
+ };
+
+ target-module@d8000 { /* 0x481d8000, ap 64 66.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xd82fc 0x4>,
+ <0xd8110 0x4>,
+ <0xd8114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_MMC2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd8000 0x1000>;
+
+ mmc2: mmc@0 {
+ compatible = "ti,am335-sdhci";
+ ti,needs-special-reset;
+ dmas = <&edma 2 0
+ &edma 3 0>;
+ dma-names = "tx", "rx";
+ interrupts = <28>;
+ reg = <0x0 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+
+ segment@200000 { /* 0x48200000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00200000 0x010000>;
+
+ target-module@0 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ power-domains = <&prm_mpu>;
+ clocks = <&mpu_clkctrl AM3_MPU_MPU_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x10000>;
+
+ mpu@0 {
+ compatible = "ti,omap3-mpu";
+ pm-sram = <&pm_sram_code
+ &pm_sram_data>;
+ };
+ };
+ };
+
+ segment@300000 { /* 0x48300000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00300000 0x001000>, /* ap 66 */
+ <0x00001000 0x00301000 0x001000>, /* ap 67 */
+ <0x00002000 0x00302000 0x001000>, /* ap 68 */
+ <0x00003000 0x00303000 0x001000>, /* ap 69 */
+ <0x00004000 0x00304000 0x001000>, /* ap 70 */
+ <0x00005000 0x00305000 0x001000>, /* ap 71 */
+ <0x0000e000 0x0030e000 0x001000>, /* ap 72 */
+ <0x0000f000 0x0030f000 0x001000>, /* ap 73 */
+ <0x00018000 0x00318000 0x004000>, /* ap 74 */
+ <0x0001c000 0x0031c000 0x001000>, /* ap 75 */
+ <0x00010000 0x00310000 0x002000>, /* ap 76 */
+ <0x00012000 0x00312000 0x001000>, /* ap 93 */
+ <0x00015000 0x00315000 0x001000>, /* ap 94 */
+ <0x00016000 0x00316000 0x001000>, /* ap 95 */
+ <0x00017000 0x00317000 0x001000>, /* ap 96 */
+ <0x00013000 0x00313000 0x001000>, /* ap 97 */
+ <0x00014000 0x00314000 0x001000>, /* ap 98 */
+ <0x00020000 0x00320000 0x001000>, /* ap 99 */
+ <0x00021000 0x00321000 0x001000>, /* ap 100 */
+ <0x00022000 0x00322000 0x001000>, /* ap 101 */
+ <0x00023000 0x00323000 0x001000>, /* ap 102 */
+ <0x00024000 0x00324000 0x001000>, /* ap 103 */
+ <0x00025000 0x00325000 0x001000>; /* ap 104 */
+
+ target-module@0 { /* 0x48300000, ap 66 48.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x0 0x4>,
+ <0x4 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+
+ epwmss0: epwmss@0 {
+ compatible = "ti,am33xx-pwmss";
+ reg = <0x0 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges = <0 0 0x1000>;
+
+ ecap0: pwm@100 {
+ compatible = "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ eqep0: counter@180 {
+ compatible = "ti,am3352-eqep";
+ reg = <0x180 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "sysclkout";
+ interrupts = <79>;
+ status = "disabled";
+ };
+
+ ehrpwm0: pwm@200 {
+ compatible = "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x200 0x80>;
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+ };
+ };
+
+ target-module@2000 { /* 0x48302000, ap 68 52.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x2000 0x4>,
+ <0x2004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2000 0x1000>;
+
+ epwmss1: epwmss@0 {
+ compatible = "ti,am33xx-pwmss";
+ reg = <0x0 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges = <0 0 0x1000>;
+
+ ecap1: pwm@100 {
+ compatible = "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ eqep1: counter@180 {
+ compatible = "ti,am3352-eqep";
+ reg = <0x180 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "sysclkout";
+ interrupts = <88>;
+ status = "disabled";
+ };
+
+ ehrpwm1: pwm@200 {
+ compatible = "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x200 0x80>;
+ clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+ };
+ };
+
+ target-module@4000 { /* 0x48304000, ap 70 44.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x4000 0x4>,
+ <0x4004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+
+ epwmss2: epwmss@0 {
+ compatible = "ti,am33xx-pwmss";
+ reg = <0x0 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges = <0 0 0x1000>;
+
+ ecap2: pwm@100 {
+ compatible = "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ eqep2: counter@180 {
+ compatible = "ti,am3352-eqep";
+ reg = <0x180 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "sysclkout";
+ interrupts = <89>;
+ status = "disabled";
+ };
+
+ ehrpwm2: pwm@200 {
+ compatible = "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x200 0x80>;
+ clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+ };
+ };
+
+ target-module@e000 { /* 0x4830e000, ap 72 4a.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xe000 0x4>,
+ <0xe054 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): per_pwrdm, lcdc_clkdm */
+ clocks = <&lcdc_clkctrl AM3_LCDC_LCDC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe000 0x1000>;
+
+ lcdc: lcdc@0 {
+ compatible = "ti,am33xx-tilcdc";
+ reg = <0x0 0x1000>;
+ interrupts = <36>;
+ status = "disabled";
+ };
+ };
+
+ target-module@10000 { /* 0x48310000, ap 76 4e.1 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x11fe0 0x4>,
+ <0x11fe4 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM3_L4LS_RNG_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000 0x2000>;
+
+ rng: rng@0 {
+ compatible = "ti,omap4-rng";
+ reg = <0x0 0x2000>;
+ interrupts = <111>;
+ };
+ };
+
+ target-module@13000 { /* 0x48313000, ap 97 62.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x13000 0x1000>;
+ };
+
+ target-module@15000 { /* 0x48315000, ap 94 56.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00015000 0x00001000>,
+ <0x00001000 0x00016000 0x00001000>;
+ };
+
+ target-module@18000 { /* 0x48318000, ap 74 4c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x18000 0x4000>;
+ };
+
+ target-module@20000 { /* 0x48320000, ap 99 34.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x20000 0x1000>;
+ };
+
+ target-module@22000 { /* 0x48322000, ap 101 3e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x22000 0x1000>;
+ };
+
+ target-module@24000 { /* 0x48324000, ap 103 68.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x24000 0x1000>;
+ };
+ };
+};
+
diff --git a/src/arm/ti/omap/am33xx.dtsi b/src/arm/ti/omap/am33xx.dtsi
new file mode 100644
index 0000000..5b9e01a
--- /dev/null
+++ b/src/arm/ti/omap/am33xx.dtsi
@@ -0,0 +1,725 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for AM33XX SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+#include <dt-bindings/clock/am3.h>
+
+/ {
+ compatible = "ti,am33xx";
+ interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ d-can0 = &dcan0;
+ d-can1 = &dcan1;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ phy0 = &usb0_phy;
+ phy1 = &usb1_phy;
+ ethernet0 = &cpsw_port1;
+ ethernet1 = &cpsw_port2;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ mmc0 = &mmc1;
+ mmc1 = &mmc2;
+ mmc2 = &mmc3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ enable-method = "ti,am3352";
+ device_type = "cpu";
+ reg = <0>;
+
+ operating-points-v2 = <&cpu0_opp_table>;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+ cpu-idle-states = <&mpu_gate>;
+ };
+
+ idle-states {
+ mpu_gate: mpu_gate {
+ compatible = "arm,idle-state";
+ entry-latency-us = <40>;
+ exit-latency-us = <90>;
+ min-residency-us = <300>;
+ ti,idle-wkup-m3;
+ };
+ };
+ };
+
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ syscon = <&scm_conf>;
+
+ /*
+ * The three following nodes are marked with opp-suspend
+ * because the can not be enabled simultaneously on a
+ * single SoC.
+ */
+ opp-50-300000000{
+ /* OPP50 */
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <950000 931000 969000>;
+ opp-supported-hw = <0x06 0x0010>;
+ opp-suspend;
+ };
+
+ opp-100-275000000{
+ /* OPP100-1 */
+ opp-hz = /bits/ 64 <275000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0x01 0x00FF>;
+ opp-suspend;
+ };
+
+ opp-100-300000000{
+ /* OPP100-2 */
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0x06 0x0020>;
+ opp-suspend;
+ };
+
+ opp-100-500000000{
+ /* OPP100-3 */
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0x01 0xFFFF>;
+ };
+
+ opp-100-600000000 {
+ /* OPP100-4 */
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0x06 0x0040>;
+ };
+
+ opp-120-600000000 {
+ /* OPP120-1 */
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1200000 1176000 1224000>;
+ opp-supported-hw = <0x01 0xFFFF>;
+ };
+
+ opp-120-720000000 {
+ /* OPP120-2 */
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <1200000 1176000 1224000>;
+ opp-supported-hw = <0x06 0x0080>;
+ };
+
+ opp-720000000 {
+ /* OPP Turbo-1 */
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <1260000 1234800 1285200>;
+ opp-supported-hw = <0x01 0xFFFF>;
+ };
+
+ opp-800000000 {
+ /* OPP Turbo-2 */
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1260000 1234800 1285200>;
+ opp-supported-hw = <0x06 0x0100>;
+ };
+
+ opp-1000000000 {
+ /* OPP Nitro */
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1325000 1298500 1351500>;
+ opp-supported-hw = <0x04 0x0200>;
+ };
+ };
+
+ target-module@4b000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ clocks = <&l3_clkctrl AM3_L3_L3_INSTR_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b000000 0x1000000>;
+
+ target-module@140000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ clocks = <&l3_aon_clkctrl AM3_L3_AON_DEBUGSS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x140000 0xec0000>;
+
+ pmu@0 {
+ compatible = "arm,cortex-a8-pmu";
+ interrupts = <3>;
+ };
+ };
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is used for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ };
+
+ /*
+ * XXX: Use a flat representation of the AM33XX interconnect.
+ * The real AM33XX interconnect network is quite complex. Since
+ * it will not bring real advantage to represent that in DT
+ * for the moment, just use a fake OCP bus entry to represent
+ * the whole bus hierarchy.
+ */
+ ocp: ocp {
+ compatible = "simple-pm-bus";
+ power-domains = <&prm_per>;
+ clocks = <&l3_clkctrl AM3_L3_L3_MAIN_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ l4_wkup: interconnect@44c00000 {
+ };
+ l4_per: interconnect@48000000 {
+ };
+ l4_fw: interconnect@47c00000 {
+ };
+ l4_fast: interconnect@4a000000 {
+ };
+ l4_mpuss: interconnect@4b140000 {
+ };
+
+ intc: interrupt-controller@48200000 {
+ compatible = "ti,am33xx-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x48200000 0x1000>;
+ };
+
+ target-module@49000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49000000 0x4>;
+ reg-names = "rev";
+ clocks = <&l3_clkctrl AM3_L3_TPCC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49000000 0x10000>;
+
+ edma: dma@0 {
+ compatible = "ti,edma3-tpcc";
+ reg = <0 0x10000>;
+ reg-names = "edma3_cc";
+ interrupts = <12 13 14>;
+ interrupt-names = "edma3_ccint", "edma3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+ <&edma_tptc2 0>;
+
+ ti,edma-memcpy-channels = <20 21>;
+ };
+ };
+
+ target-module@49800000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49800000 0x4>,
+ <0x49800010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&l3_clkctrl AM3_L3_TPTC0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49800000 0x100000>;
+
+ edma_tptc0: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <112>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@49900000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49900000 0x4>,
+ <0x49900010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&l3_clkctrl AM3_L3_TPTC1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49900000 0x100000>;
+
+ edma_tptc1: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <113>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@49a00000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49a00000 0x4>,
+ <0x49a00010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&l3_clkctrl AM3_L3_TPTC2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49a00000 0x100000>;
+
+ edma_tptc2: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <114>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@47810000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x478102fc 0x4>,
+ <0x47810110 0x4>,
+ <0x47810114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x47810000 0x1000>;
+
+ mmc3: mmc@0 {
+ compatible = "ti,am335-sdhci";
+ ti,needs-special-reset;
+ interrupts = <29>;
+ reg = <0x0 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ usb: target-module@47400000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x47400000 0x4>,
+ <0x47400010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-delay-us = <2>;
+ clocks = <&l3s_clkctrl AM3_L3S_USB_OTG_HS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x47400000 0x8000>;
+
+ usb0_phy: usb-phy@1300 {
+ compatible = "ti,am335x-usb-phy";
+ reg = <0x1300 0x100>;
+ reg-names = "phy";
+ ti,ctrl_mod = <&usb_ctrl_mod>;
+ #phy-cells = <0>;
+ };
+
+ usb0: usb@1400 {
+ compatible = "ti,musb-am33xx";
+ reg = <0x1400 0x400>,
+ <0x1000 0x200>;
+ reg-names = "mc", "control";
+
+ interrupts = <18>;
+ interrupt-names = "mc";
+ dr_mode = "otg";
+ mentor,multipoint = <1>;
+ mentor,num-eps = <16>;
+ mentor,ram-bits = <12>;
+ mentor,power = <500>;
+ phys = <&usb0_phy>;
+
+ dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+ &cppi41dma 2 0 &cppi41dma 3 0
+ &cppi41dma 4 0 &cppi41dma 5 0
+ &cppi41dma 6 0 &cppi41dma 7 0
+ &cppi41dma 8 0 &cppi41dma 9 0
+ &cppi41dma 10 0 &cppi41dma 11 0
+ &cppi41dma 12 0 &cppi41dma 13 0
+ &cppi41dma 14 0 &cppi41dma 0 1
+ &cppi41dma 1 1 &cppi41dma 2 1
+ &cppi41dma 3 1 &cppi41dma 4 1
+ &cppi41dma 5 1 &cppi41dma 6 1
+ &cppi41dma 7 1 &cppi41dma 8 1
+ &cppi41dma 9 1 &cppi41dma 10 1
+ &cppi41dma 11 1 &cppi41dma 12 1
+ &cppi41dma 13 1 &cppi41dma 14 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+ "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+ "rx14", "rx15",
+ "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+ "tx14", "tx15";
+ };
+
+ usb1_phy: usb-phy@1b00 {
+ compatible = "ti,am335x-usb-phy";
+ reg = <0x1b00 0x100>;
+ reg-names = "phy";
+ ti,ctrl_mod = <&usb_ctrl_mod>;
+ #phy-cells = <0>;
+ };
+
+ usb1: usb@1800 {
+ compatible = "ti,musb-am33xx";
+ reg = <0x1c00 0x400>,
+ <0x1800 0x200>;
+ reg-names = "mc", "control";
+ interrupts = <19>;
+ interrupt-names = "mc";
+ dr_mode = "otg";
+ mentor,multipoint = <1>;
+ mentor,num-eps = <16>;
+ mentor,ram-bits = <12>;
+ mentor,power = <500>;
+ phys = <&usb1_phy>;
+
+ dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+ &cppi41dma 17 0 &cppi41dma 18 0
+ &cppi41dma 19 0 &cppi41dma 20 0
+ &cppi41dma 21 0 &cppi41dma 22 0
+ &cppi41dma 23 0 &cppi41dma 24 0
+ &cppi41dma 25 0 &cppi41dma 26 0
+ &cppi41dma 27 0 &cppi41dma 28 0
+ &cppi41dma 29 0 &cppi41dma 15 1
+ &cppi41dma 16 1 &cppi41dma 17 1
+ &cppi41dma 18 1 &cppi41dma 19 1
+ &cppi41dma 20 1 &cppi41dma 21 1
+ &cppi41dma 22 1 &cppi41dma 23 1
+ &cppi41dma 24 1 &cppi41dma 25 1
+ &cppi41dma 26 1 &cppi41dma 27 1
+ &cppi41dma 28 1 &cppi41dma 29 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+ "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+ "rx14", "rx15",
+ "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+ "tx14", "tx15";
+ };
+
+ cppi41dma: dma-controller@2000 {
+ compatible = "ti,am3359-cppi41";
+ reg = <0x0000 0x1000>,
+ <0x2000 0x1000>,
+ <0x3000 0x1000>,
+ <0x4000 0x4000>;
+ reg-names = "glue", "controller", "scheduler", "queuemgr";
+ interrupts = <17>;
+ interrupt-names = "glue";
+ #dma-cells = <2>;
+ /* For backwards compatibility: */
+ #dma-channels = <30>;
+ dma-channels = <30>;
+ #dma-requests = <256>;
+ dma-requests = <256>;
+ };
+ };
+
+ target-module@40300000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ clocks = <&l3_clkctrl AM3_L3_OCMCRAM_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x40300000 0x10000>;
+
+ ocmcram: sram@0 {
+ compatible = "mmio-sram";
+ reg = <0 0x10000>; /* 64k */
+ ranges = <0 0 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pm_sram_code: pm-code-sram@0 {
+ compatible = "ti,sram";
+ reg = <0x0 0x1000>;
+ protect-exec;
+ };
+
+ pm_sram_data: pm-data-sram@1000 {
+ compatible = "ti,sram";
+ reg = <0x1000 0x1000>;
+ pool;
+ };
+ };
+ };
+
+ target-module@4c000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x4c000000 0x4>;
+ reg-names = "rev";
+ clocks = <&l3_clkctrl AM3_L3_EMIF_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4c000000 0x1000000>;
+
+ emif: emif@0 {
+ compatible = "ti,emif-am3352";
+ reg = <0 0x1000000>;
+ interrupts = <101>;
+ sram = <&pm_sram_code
+ &pm_sram_data>;
+ };
+ };
+
+ target-module@50000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x50000000 4>,
+ <0x50000010 4>,
+ <0x50000014 4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&l3s_clkctrl AM3_L3S_GPMC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
+ <0x00000000 0x00000000 0x40000000>; /* data */
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ reg = <0x50000000 0x2000>;
+ interrupts = <100>;
+ dmas = <&edma 52 0>;
+ dma-names = "rxtx";
+ gpmc,num-cs = <7>;
+ gpmc,num-waitpins = <2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+ };
+
+ sham_target: target-module@53100000 {
+ compatible = "ti,sysc-omap3-sham", "ti,sysc";
+ reg = <0x53100100 0x4>,
+ <0x53100110 0x4>,
+ <0x53100114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l3_clkdm */
+ clocks = <&l3_clkctrl AM3_L3_SHAM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x53100000 0x1000>;
+
+ sham: sham@0 {
+ compatible = "ti,omap4-sham";
+ reg = <0 0x200>;
+ interrupts = <109>;
+ dmas = <&edma 36 0>;
+ dma-names = "rx";
+ };
+ };
+
+ aes_target: target-module@53500000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x53500080 0x4>,
+ <0x53500084 0x4>,
+ <0x53500088 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l3_clkdm */
+ clocks = <&l3_clkctrl AM3_L3_AES_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x53500000 0x1000>;
+
+ aes: aes@0 {
+ compatible = "ti,omap4-aes";
+ reg = <0 0xa0>;
+ interrupts = <103>;
+ dmas = <&edma 6 0>,
+ <&edma 5 0>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@56000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x5600fe00 0x4>,
+ <0x5600fe10 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>;
+ clock-names = "fck";
+ power-domains = <&prm_gfx>;
+ resets = <&prm_gfx 0>;
+ reset-names = "rstctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x56000000 0x1000000>;
+
+ /*
+ * Closed source PowerVR driver, no child device
+ * binding or driver in mainline
+ */
+ };
+ };
+};
+
+#include "am33xx-l4.dtsi"
+#include "am33xx-clocks.dtsi"
+
+&prcm {
+ prm_per: prm@c00 {
+ compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+ reg = <0xc00 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_wkup: prm@d00 {
+ compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+ reg = <0xd00 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_mpu: prm@e00 {
+ compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+ reg = <0xe00 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_device: prm@f00 {
+ compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+ reg = <0xf00 0x100>;
+ #reset-cells = <1>;
+ };
+
+ prm_rtc: prm@1000 {
+ compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1000 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_gfx: prm@1100 {
+ compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1100 0x100>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
+
+ prm_cefuse: prm@1200 {
+ compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1200 0x100>;
+ #power-domain-cells = <0>;
+ };
+};
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+ clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_TIMER1_CLKCTRL 0>,
+ <&l4_wkup_clkctrl AM3_L4_WKUP_L4_WKUP_CLKCTRL 0>;
+ clock-names = "fck", "ick";
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&timer1_fck>;
+ assigned-clock-parents = <&sys_clkin_ck>;
+ };
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+ clocks = <&l4ls_clkctrl AM3_L4LS_TIMER2_CLKCTRL 0>,
+ <&l4ls_clkctrl AM3_L4LS_L4_LS_CLKCTRL 0>;
+ clock-names = "fck", "ick";
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&timer2_fck>;
+ assigned-clock-parents = <&sys_clkin_ck>;
+ };
+};
diff --git a/src/arm/ti/omap/am3517-craneboard.dts b/src/arm/ti/omap/am3517-craneboard.dts
new file mode 100644
index 0000000..d035c88
--- /dev/null
+++ b/src/arm/ti/omap/am3517-craneboard.dts
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * See craneboard.org for more details
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+
+/ {
+ model = "TI AM3517 CraneBoard (TMDSEVM3517)";
+ compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ vbat: fixedregulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+};
+
+&davinci_emac {
+ status = "okay";
+};
+
+&davinci_mdio {
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ /* goes to expansion connector */
+ status = "disabled";
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ /* goes to expansion connector */
+ status = "disabled";
+};
+
+&mmc1 {
+ vmmc-supply = <&vdd2_reg>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ /* goes to expansion connector */
+ status = "disabled";
+};
+
+&mmc3 {
+ /* goes to expansion connector */
+ status = "disabled";
+};
+
+#include "../../tps65910.dtsi"
+
+&omap3_pmx_core {
+ tps_pins: tps-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
+ >;
+ };
+};
+
+&tps {
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps_pins>;
+
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ ti,en-ck32k-xtal;
+
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ /*
+ * Unused:
+ * VDIG1=2.7V,300mA max
+ * VDIG2=1.8V,300mA max
+ */
+
+ vpll_reg: regulator@7 {
+ /* VDDS_DPLL_1V8 */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ /* VDDS_SRAM_1V8 */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ /* VDDA1P8V_USBPHY */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ /* VAUX33 unused */
+
+ vdac_reg: regulator@8 {
+ /* VDDA_DAC_1V8 */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ /* VDDA3P3V_USBPHY */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ /* VDD_CORE */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDDSHV_3V3 */
+ regulator-name = "vdd_shv";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* VDD3 unused */
+ };
+};
diff --git a/src/arm/ti/omap/am3517-evm-ui.dtsi b/src/arm/ti/omap/am3517-evm-ui.dtsi
new file mode 100644
index 0000000..16b8968
--- /dev/null
+++ b/src/arm/ti/omap/am3517-evm-ui.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2018 Logic PD, Inc - https://www.logicpd.com/
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ codec1 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "tlv320aic23-hifi";
+
+ simple-audio-card,widgets =
+ "Microphone", "Mic In",
+ "Line", "Line In",
+ "Line", "Line Out";
+
+ simple-audio-card,routing =
+ "Line Out", "LOUT",
+ "Line Out", "ROUT",
+ "LLINEIN", "Line In",
+ "RLINEIN", "Line In",
+ "MICIN", "Mic In";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_master>;
+ simple-audio-card,frame-master = <&sound_master>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcbsp1>;
+ };
+
+ sound_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic23_1>;
+ system-clock-frequency = <12000000>;
+ };
+ };
+
+ codec2 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "tlv320aic23-hifi";
+
+ simple-audio-card,widgets =
+ "Microphone", "Mic In",
+ "Line", "Line In",
+ "Line", "Line Out";
+
+ simple-audio-card,routing =
+ "Line Out", "LOUT",
+ "Line Out", "ROUT",
+ "LLINEIN", "Line In",
+ "RLINEIN", "Line In",
+ "MICIN", "Mic In";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_master2>;
+ simple-audio-card,frame-master = <&sound_master2>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcbsp2>;
+ };
+
+ sound_master2: simple-audio-card,codec {
+ sound-dai = <&tlv320aic23_2>;
+ system-clock-frequency = <12000000>;
+ };
+ };
+
+ expander-keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ key-record {
+ label = "Record";
+ /* linux,code = <BTN_0>; */
+ gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
+ };
+
+ key-play {
+ label = "Play";
+ linux,code = <KEY_PLAY>;
+ gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>;
+ };
+
+ key-stop {
+ label = "Stop";
+ linux,code = <KEY_STOP>;
+ gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>;
+ };
+
+ key-fwd {
+ label = "FWD";
+ linux,code = <KEY_FASTFORWARD>;
+ gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>;
+ };
+
+ key-rwd {
+ label = "RWD";
+ linux,code = <KEY_REWIND>;
+ gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>;
+ };
+
+ key-shift {
+ label = "Shift";
+ linux,code = <KEY_LEFTSHIFT>;
+ gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>;
+ };
+
+ key-mode {
+ label = "Mode";
+ linux,code = <BTN_MODE>;
+ gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>;
+ };
+
+ key-menu {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>;
+ };
+
+ key-up {
+ label = "Up";
+ linux,code = <KEY_UP>;
+ gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>;
+ };
+
+ key-down {
+ label = "Down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&i2c2 {
+ /* Audio codecs */
+ tlv320aic23_1: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+ };
+
+ tlv320aic23_2: codec@1b {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1b>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+ };
+};
+
+&i2c3 {
+ /* Audio codecs */
+ tlv320aic23_3: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+ };
+
+ /* GPIO Expanders */
+ tca6416_2: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <&vdd_io_reg>;
+ };
+
+ tca6416_3: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <&vdd_io_reg>;
+ };
+
+ /* TVP5146 Analog Video decoder input */
+ tvp5146@5c {
+ compatible = "ti,tvp5146m2";
+ reg = <0x5c>;
+ };
+};
+
+&mcbsp1 {
+ status = "okay";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 {
+ status = "okay";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&omap3_pmx_core {
+ mcbsp1_pins: mcbsp1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */
+ OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */
+ OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */
+ >;
+ };
+
+ mcbsp2_pins: mcbsp2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/am3517-evm.dts b/src/arm/ti/omap/am3517-evm.dts
new file mode 100644
index 0000000..40f15da
--- /dev/null
+++ b/src/arm/ti/omap/am3517-evm.dts
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+#include "am3517-som.dtsi"
+#include "am3517-evm-ui.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
+ compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
+
+ aliases {
+ display0 = &lcd0;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ vmmc_fixed: vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ button-user {
+ label = "User Push Button";
+ linux,code = <BTN_0>;
+ gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
+ };
+
+ switch-1 {
+ label = "User Switch 1";
+ linux,code = <BTN_1>;
+ gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
+ };
+
+ switch-2 {
+ label = "User Switch 2";
+ linux,code = <BTN_2>;
+ gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
+ };
+
+ switch-3 {
+ label = "User Switch 3";
+ linux,code = <BTN_3>;
+ gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
+ };
+
+ switch-4 {
+ label = "User Switch 4";
+ linux,code = <BTN_4>;
+ gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
+ };
+
+ switch-5 {
+ label = "User Switch 5";
+ linux,code = <BTN_5>;
+ gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
+ };
+
+ switch-6 {
+ label = "User Switch 6";
+ linux,code = <BTN_6>;
+ gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
+ };
+
+ switch-7 {
+ label = "User Switch 7";
+ linux,code = <BTN_7>;
+ gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
+ };
+
+ switch-8 {
+ label = "User Switch 8";
+ linux,code = <BTN_8>;
+ gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins>;
+
+ user_led_1 {
+ label = "am3517evm:green:user_led_1";
+ gpios = <&tca6416 7 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ user_led_2 {
+ label = "am3517evm:green:user_led_2";
+ gpios = <&tca6416 6 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ user_led_3 {
+ label = "am3517evm:green:user_led_3";
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0"; /* SD/MMC card activity */
+ };
+
+ user_led_4 {
+ label = "am3517evm:green:user_led_4";
+ gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ lcd0: display@0 {
+ /* This isn't the exact LCD, but the timings meet spec */
+ /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
+ compatible = "newhaven,nhd-4.3-480272ef-atxl";
+ label = "15";
+ backlight = <&bl>;
+ enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */
+ vcc-supply = <&vdd_io_reg>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
+ bl: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ power-supply = <&vdd_io_reg>;
+ pinctrl-0 = <&backlight_pins>;
+ pwms = <&pwm11 0 5000000 0>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <7>;
+ enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
+ };
+
+ pwm11: pwm-11 {
+ compatible = "ti,omap-dmtimer-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ ti,timers = <&timer11>;
+ #pwm-cells = <3>;
+ ti,clock-source = <0x01>;
+ };
+
+ /* HS USB Host PHY on PORT 1 */
+ hsusb1_phy: hsusb1_phy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb1_rst_pins>;
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
+ #phy-cells = <0>;
+ };
+};
+
+&davinci_emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <ðernet_pins>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&enet_phy_pins>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>; /* gpio_58 */
+ };
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ vdds_dsi-supply = <&vdd_io_reg>;
+ vdda_video-supply = <&vdd_io_reg>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <16>;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ clock-frequency = <400000>;
+ /* User DIP swithes [1:8] / User LEDS [1:2] */
+ tca6416: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <&vdd_io_reg>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ clock-frequency = <400000>;
+};
+
+&mmc1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc_fixed>;
+ bus-width = <4>;
+ wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
+ cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&usbhshost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb1_pins>;
+ port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy>;
+};
+
+&omap3_pmx_core {
+
+ ethernet_pins: ethernet-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+ OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+ OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+ OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+ OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+ OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+ OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+ OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+ OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+ OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+ >;
+ };
+
+ enet_phy_pins: ethernet-phy-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20bc, PIN_INPUT | MUX_MODE4) /* gpmc_ncs7.gpio_57 */
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat4.gpio_126 */
+ OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat5.gpio_127 */
+ >;
+ };
+
+ pwm_pins: pwm-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1) /* mcspi2_cs0.gpt11_pwm */
+ >;
+ };
+
+ backlight_pins: backlight-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4) /* mcspi2_cs1.gpio_182 */
+ >;
+ };
+
+ dss_dpi_pins: dss-dpi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ >;
+ };
+
+ hsusb1_rst_pins: hsusb1-rst-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+
+ hsusb1_pins: hsusb1-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
+ OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
+ OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */
+ OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */
+ OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */
+ OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */
+ OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */
+ OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */
+ OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */
+ OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */
+ OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */
+ OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */
+ >;
+ };
+};
+
+&omap3_pmx_wkup {
+ leds_pins: leds-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */
+ OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/am3517-som.dtsi b/src/arm/ti/omap/am3517-som.dtsi
new file mode 100644
index 0000000..bd0a6c9
--- /dev/null
+++ b/src/arm/ti/omap/am3517-som.dtsi
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Derald D. Woods <woods.technical@gmail.com>
+ *
+ * Based on am3517-evm.dts
+ */
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd_core_reg>;
+ };
+ };
+
+ wl12xx_buffer: wl12xx_buf {
+ compatible = "regulator-fixed";
+ regulator-name = "wl1271_buf";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_buffer_pins>;
+ gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */
+ regulator-always-on;
+ vin-supply = <&vdd_1v8_reg>;
+ };
+
+ wl12xx_vmmc2: wl12xx_vmmc2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_wkup_pins>;
+ gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ regulator-always-on;
+ vin-supply = <&wl12xx_buffer>;
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ linux,mtd-name = "micron,mt29f4g16abchch";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ nand-bus-width = <16>;
+ ti,nand-ecc-opt = "bch8";
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+
+ s35390a: s35390a@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_pins>;
+ interrupts-extended = <&gpio2 23 IRQ_TYPE_EDGE_FALLING>; /* gpio_55 */
+ };
+
+ tps: tps65023@48 {
+ compatible = "ti,tps65023";
+ reg = <0x48>;
+
+ regulators {
+ vdd_core_reg: VDCDC1 {
+ regulator-name = "vdd_core";
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vdd_io_reg: VDCDC2 {
+ regulator-name = "vdd_io";
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_1v8_reg: VDCDC3 {
+ regulator-name = "vdd_1v8";
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vdd_usb18_reg: LDO1 {
+ regulator-name = "vdd_usb18";
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vdd_usb33_reg: LDO2 {
+ regulator-name = "vdd_usb33";
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+
+ touchscreen: tsc2004@4b {
+ compatible = "ti,tsc2004";
+ reg = <0x4b>;
+
+ vio-supply = <&vdd_io_reg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsc2004_pins>;
+ interrupts-extended = <&gpio3 1 IRQ_TYPE_EDGE_RISING>; /* gpio_65 */
+
+ touchscreen-fuzz-x = <4>;
+ touchscreen-fuzz-y = <7>;
+ touchscreen-fuzz-pressure = <2>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <272>;
+ touchscreen-max-pressure = <2048>;
+
+ ti,x-plate-ohms = <280>;
+ ti,esd-recovery-timeout-ms = <8000>;
+ };
+};
+
+&mmc2 {
+ interrupts-extended = <&intc 86 /* &omap3_pmx_core 0x12c */>;
+
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&wl12xx_vmmc2>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */
+ ref-clock-frequency = <26000000>;
+ tcxo-clock-frequency = <26000000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+
+ bluetooth {
+ compatible = "ti,wl1271-st";
+ enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio 56 */
+ max-speed = <3000000>;
+ };
+};
+
+&omap3_pmx_core {
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ wl12xx_buffer_pins: wl12xx-buffer-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_clk.mmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_cmd.mmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat0.mmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat1.mmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat2.mmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat3.mmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat4.mmc2_dir_dat0 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat5.mmc2_dir_dat1 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat6.mmc2_dir_cmd */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* mmc2_dat7.mmc2_clkin */
+ OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE4) /* hdq_sio.gpio_170 */
+ >;
+ };
+
+ rtc_pins: rtc-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */
+ >;
+ };
+
+ tsc2004_pins: tsc2004-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0) /* uart2_rts */
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
+ OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT | MUX_MODE0) /* gpio_56 */
+ >;
+ };
+};
+
+&omap3_pmx_wkup {
+
+ wl12xx_wkup_pins: wl12xx-wkup-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/am3517.dtsi b/src/arm/ti/omap/am3517.dtsi
new file mode 100644
index 0000000..77e58e6
--- /dev/null
+++ b/src/arm/ti/omap/am3517.dtsi
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for am3517 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "omap3.dtsi"
+
+/* AM3517 doesn't appear to have the crypto engines defined in omap3.dtsi */
+/delete-node/ &aes1_target;
+/delete-node/ &aes2_target;
+
+/ {
+ aliases {
+ serial3 = &uart4;
+ can = &hecc;
+ ethernet = &davinci_emac;
+ };
+
+ cpus {
+ cpu: cpu@0 {
+ /* Based on OMAP3630 variants OPP50 and OPP100 */
+ operating-points-v2 = <&cpu0_opp_table>;
+
+ clock-latency = <300000>; /* From legacy driver */
+ };
+ };
+
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ syscon = <&scm_conf>;
+ /*
+ * AM3517 TRM only lists 600MHz @ 1.2V, but omap36xx
+ * appear to operate at 300MHz as well. Since AM3517 only
+ * lists one operating voltage, it will remain fixed at 1.2V
+ */
+ opp-50-300000000 {
+ /* OPP50 */
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <1200000>;
+ opp-supported-hw = <0xffffffff 0xffffffff>;
+ opp-suspend;
+ };
+
+ opp-100-600000000 {
+ /* OPP100 */
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1200000>;
+ opp-supported-hw = <0xffffffff 0xffffffff>;
+ };
+ };
+
+ ocp@68000000 {
+ target-module@5c040000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x5c040400 0x4>,
+ <0x5c040404 0x4>,
+ <0x5c040408 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&hsotgusb_ick_am35xx>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5c040000 0x1000>;
+
+ am35x_otg_hs: am35x_otg_hs@0 {
+ compatible = "ti,omap3-musb";
+ status = "disabled";
+ reg = <0 0x1000>;
+ interrupts = <71>;
+ interrupt-names = "mc";
+ };
+ };
+
+ davinci_emac: ethernet@5c000000 {
+ compatible = "ti,am3517-emac";
+ ti,hwmods = "davinci_emac";
+ status = "disabled";
+ reg = <0x5c000000 0x30000>;
+ interrupts = <67 68 69 70>;
+ syscon = <&scm_conf>;
+ ti,davinci-ctrl-reg-offset = <0x10000>;
+ ti,davinci-ctrl-mod-reg-offset = <0>;
+ ti,davinci-ctrl-ram-offset = <0x20000>;
+ ti,davinci-ctrl-ram-size = <0x2000>;
+ ti,davinci-rmii-en = /bits/ 8 <1>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ clocks = <&emac_ick>;
+ clock-names = "ick";
+ };
+
+ davinci_mdio: mdio@5c030000 {
+ compatible = "ti,davinci_mdio";
+ ti,hwmods = "davinci_mdio";
+ status = "disabled";
+ reg = <0x5c030000 0x1000>;
+ bus_freq = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&emac_fck>;
+ clock-names = "fck";
+ };
+
+ uart4: serial@4809e000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart4";
+ status = "disabled";
+ reg = <0x4809e000 0x400>;
+ interrupts = <84>;
+ dmas = <&sdma 55 &sdma 54>;
+ dma-names = "tx", "rx";
+ clock-frequency = <48000000>;
+ };
+
+ omap3_pmx_core2: pinmux@480025d8 {
+ compatible = "ti,omap3-padconf", "pinctrl-single";
+ reg = <0x480025d8 0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
+
+ hecc: can@5c050000 {
+ compatible = "ti,am3517-hecc";
+ status = "disabled";
+ reg = <0x5c050000 0x80>,
+ <0x5c053000 0x180>,
+ <0x5c052000 0x200>;
+ reg-names = "hecc", "hecc-ram", "mbx";
+ interrupts = <24>;
+ clocks = <&hecc_ck>;
+ };
+
+ /*
+ * On am3517 the OCP registers do not seem to be accessible
+ * similar to the omap34xx. Maybe SGX is permanently set to
+ * "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is
+ * write-only at 0x50000e10. We detect SGX based on the SGX
+ * revision register instead of the unreadable OCP revision
+ * register.
+ */
+ sgx_module: target-module@50000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x50000014 0x4>;
+ reg-names = "rev";
+ clocks = <&sgx_fck>, <&sgx_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x50000000 0x4000>;
+
+ /*
+ * Closed source PowerVR driver, no child device
+ * binding or driver in mainline
+ */
+ };
+ };
+};
+
+/* Not currently working, probably needs at least different clocks */
+&rng_target {
+ status = "disabled";
+ /delete-property/ clocks;
+};
+
+/* Table Table 5-79 of the TRM shows 480ab000 is reserved */
+&usb_otg_target {
+ status = "disabled";
+};
+
+&iva {
+ status = "disabled";
+};
+
+&mailbox {
+ status = "disabled";
+};
+
+&mmu_isp {
+ status = "disabled";
+};
+
+#include "am35xx-clocks.dtsi"
+#include "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&gpt1_fck>;
+ assigned-clock-parents = <&sys_ck>;
+ };
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&gpt2_fck>;
+ assigned-clock-parents = <&sys_ck>;
+ };
+};
diff --git a/src/arm/ti/omap/am3517_mt_ventoux.dts b/src/arm/ti/omap/am3517_mt_ventoux.dts
new file mode 100644
index 0000000..e7d7124
--- /dev/null
+++ b/src/arm/ti/omap/am3517_mt_ventoux.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+
+/ {
+ model = "TeeJet Mt.Ventoux";
+ compatible = "teejet,mt_ventoux", "ti,am3517", "ti,omap3";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ /* AM35xx doesn't have IVA */
+ soc {
+ iva {
+ status = "disabled";
+ };
+ };
+};
diff --git a/src/arm/ti/omap/am35xx-clocks.dtsi b/src/arm/ti/omap/am35xx-clocks.dtsi
new file mode 100644
index 0000000..0ee7afa
--- /dev/null
+++ b/src/arm/ti/omap/am35xx-clocks.dtsi
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP3 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&scm_clocks {
+ emac_ick: emac_ick@32c {
+ #clock-cells = <0>;
+ compatible = "ti,am35xx-gate-clock";
+ clocks = <&ipss_ick>;
+ reg = <0x032c>;
+ ti,bit-shift = <1>;
+ };
+
+ emac_fck: emac_fck@32c {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&rmii_ck>;
+ reg = <0x032c>;
+ ti,bit-shift = <9>;
+ };
+
+ vpfe_ick: vpfe_ick@32c {
+ #clock-cells = <0>;
+ compatible = "ti,am35xx-gate-clock";
+ clocks = <&ipss_ick>;
+ reg = <0x032c>;
+ ti,bit-shift = <2>;
+ };
+
+ vpfe_fck: vpfe_fck@32c {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&pclk_ck>;
+ reg = <0x032c>;
+ ti,bit-shift = <10>;
+ };
+
+ hsotgusb_ick_am35xx: hsotgusb_ick_am35xx@32c {
+ #clock-cells = <0>;
+ compatible = "ti,am35xx-gate-clock";
+ clocks = <&ipss_ick>;
+ reg = <0x032c>;
+ ti,bit-shift = <0>;
+ };
+
+ hsotgusb_fck_am35xx: hsotgusb_fck_am35xx@32c {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&sys_ck>;
+ reg = <0x032c>;
+ ti,bit-shift = <8>;
+ };
+
+ hecc_ck: hecc_ck@32c {
+ #clock-cells = <0>;
+ compatible = "ti,am35xx-gate-clock";
+ clocks = <&sys_ck>;
+ reg = <0x032c>;
+ ti,bit-shift = <3>;
+ };
+};
+&cm_clocks {
+ clock@a10 {
+ compatible = "ti,clksel";
+ reg = <0xa10>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ ipss_ick: clock-ipss-ick {
+ #clock-cells = <0>;
+ compatible = "ti,am35xx-interface-clock";
+ clock-output-names = "ipss_ick";
+ clocks = <&core_l3_ick>;
+ ti,bit-shift = <4>;
+ };
+
+ uart4_ick_am35xx: clock-uart4-ick-am35xx {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "uart4_ick_am35xx";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <23>;
+ };
+ };
+
+ rmii_ck: rmii_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+
+ pclk_ck: pclk_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ };
+
+ clock@a00 {
+ compatible = "ti,clksel";
+ reg = <0xa00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ uart4_fck_am35xx: clock-uart4-fck-am35xx {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "uart4_fck_am35xx";
+ clocks = <&core_48m_fck>;
+ ti,bit-shift = <23>;
+ };
+ };
+};
+
+&cm_clockdomains {
+ core_l3_clkdm: core_l3_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&sdrc_ick>, <&ipss_ick>, <&emac_ick>, <&vpfe_ick>,
+ <&hsotgusb_ick_am35xx>, <&hsotgusb_fck_am35xx>,
+ <&hecc_ck>;
+ };
+
+ core_l4_clkdm: core_l4_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+ <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
+ <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+ <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+ <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+ <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+ <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+ <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+ <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+ <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+ <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+ <&uart4_ick_am35xx>, <&uart4_fck_am35xx>;
+ };
+};
diff --git a/src/arm/ti/omap/am3703.dtsi b/src/arm/ti/omap/am3703.dtsi
new file mode 100644
index 0000000..2b994ae
--- /dev/null
+++ b/src/arm/ti/omap/am3703.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&iva {
+ status = "disabled";
+};
+
+&sgx_module {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/am3715.dtsi b/src/arm/ti/omap/am3715.dtsi
new file mode 100644
index 0000000..ab328e8
--- /dev/null
+++ b/src/arm/ti/omap/am3715.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&iva {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/am3874-iceboard.dts b/src/arm/ti/omap/am3874-iceboard.dts
new file mode 100644
index 0000000..ac082e8
--- /dev/null
+++ b/src/arm/ti/omap/am3874-iceboard.dts
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for Winterland IceBoard
+ *
+ * https://mcgillcosmology.com
+ * https://threespeedlogic.com
+ *
+ * This is an ARM + FPGA instrumentation board used at telescopes in
+ * Antarctica (the South Pole Telescope), Chile (POLARBEAR), and at the DRAO
+ * observatory in British Columbia (CHIME).
+ *
+ * Copyright (c) 2019 Three-Speed Logic, Inc. <gsmecher@threespeedlogic.com>
+ */
+
+/dts-v1/;
+
+#include "dm814x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Winterland IceBoard";
+ compatible = "ti,dm8148", "ti,dm814";
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ bootargs = "earlycon";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ vmmcsd_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+/* The MAC provides internal delay for the transmit path ONLY, which is enabled
+ * provided no -id/-txid/-rxid suffix is provided to "phy-mode".
+ *
+ * The receive path is delayed at the PHY. The recommended register settings
+ * are 0xf0 for the control bits, and 0x7777 for the data bits. However, the
+ * conversion code in the kernel lies: the PHY's registers are 120 ps per tap,
+ * and the kernel assumes 200 ps per tap. So we have fudged the numbers here to
+ * obtain the correct register settings.
+ */
+&mac { dual_emac = <1>; };
+&cpsw_emac0 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <1>;
+};
+&cpsw_emac1 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0x2>;
+
+ rxc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+
+ rxd3-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd0-skew-ps = <0>;
+
+ phy-reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <0x1>;
+
+ rxc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+
+ rxd3-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd0-skew-ps = <0>;
+
+ phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mmc1 { status = "disabled"; };
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+};
+&mmc3 { status = "disabled"; };
+
+&i2c1 {
+ /* Most I2C activity happens through this port, with the sole exception
+ * of the backplane. Since there are multiply assigned addresses, the
+ * "i2c-mux-idle-disconnect" is important.
+ */
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c@0 {
+ /* FMC A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c@1 {
+ /* FMC B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c@2 {
+ /* QSFP A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c@3 {
+ /* QSFP B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c@4 {
+ /* SFP */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; };
+ ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; };
+ ina230@42 { compatible = "ti,ina230"; reg = <0x42>; shunt-resistor = <5000>; };
+
+ ina230@44 { compatible = "ti,ina230"; reg = <0x44>; shunt-resistor = <5000>; };
+ ina230@45 { compatible = "ti,ina230"; reg = <0x45>; shunt-resistor = <5000>; };
+ ina230@46 { compatible = "ti,ina230"; reg = <0x46>; shunt-resistor = <5000>; };
+
+ ina230@47 { compatible = "ti,ina230"; reg = <0x47>; shunt-resistor = <5500>; };
+ ina230@48 { compatible = "ti,ina230"; reg = <0x48>; shunt-resistor = <2360>; };
+ ina230@49 { compatible = "ti,ina230"; reg = <0x49>; shunt-resistor = <2360>; };
+ ina230@43 { compatible = "ti,ina230"; reg = <0x43>; shunt-resistor = <2360>; };
+ ina230@4b { compatible = "ti,ina230"; reg = <0x4b>; shunt-resistor = <5500>; };
+ ina230@4c { compatible = "ti,ina230"; reg = <0x4c>; shunt-resistor = <2360>; };
+ ina230@4d { compatible = "ti,ina230"; reg = <0x4d>; shunt-resistor = <770>; };
+ ina230@4e { compatible = "ti,ina230"; reg = <0x4e>; shunt-resistor = <770>; };
+ ina230@4f { compatible = "ti,ina230"; reg = <0x4f>; shunt-resistor = <770>; };
+ };
+
+ i2c@6 {
+ /* Backplane */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ u41: pca9575@20 {
+ compatible = "nxp,pca9575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "FMCA_EN_12V0", "FMCA_EN_3V3", "FMCA_EN_VADJ", "FMCA_PG_M2C",
+ "FMCA_PG_C2M", "FMCA_PRSNT_M2C_L", "FMCA_CLK_DIR", "SFP_LOS",
+ "FMCB_EN_12V0", "FMCB_EN_3V3", "FMCB_EN_VADJ", "FMCB_PG_M2C",
+ "FMCB_PG_C2M", "FMCB_PRSNT_M2C_L", "FMCB_CLK_DIR", "SFP_ModPrsL";
+ reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ };
+
+ u42: pca9575@21 {
+ compatible = "nxp,pca9575";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "QSFPA_ModPrsL", "QSFPA_IntL", "QSFPA_ResetL", "QSFPA_ModSelL",
+ "QSFPA_LPMode", "QSFPB_ModPrsL", "QSFPB_IntL", "QSFPB_ResetL",
+ "SFP_TxFault", "SFP_TxDisable", "SFP_RS0", "SFP_RS1",
+ "QSFPB_ModSelL", "QSFPB_LPMode", "SEL_SFP", "ARM_MR";
+ reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ };
+
+ u48: pca9575@22 {
+ compatible = "nxp,pca9575";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ sw-gpios = <&u48 0 0>, <&u48 1 0>, <&u48 2 0>, <&u48 3 0>,
+ <&u48 4 0>, <&u48 5 0>, <&u48 6 0>, <&u48 7 0>;
+ led-gpios = <&u48 7 0>, <&u48 6 0>, <&u48 5 0>, <&u48 4 0>,
+ <&u48 3 0>, <&u48 2 0>, <&u48 1 0>, <&u48 0 0>;
+
+ gpio-line-names =
+ "GP_SW1", "GP_SW2", "GP_SW3", "GP_SW4",
+ "GP_SW5", "GP_SW6", "GP_SW7", "GP_SW8",
+ "GP_LED8", "GP_LED7", "GP_LED6", "GP_LED5",
+ "GP_LED4", "GP_LED3", "GP_LED2", "GP_LED1";
+ reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ };
+
+ u59: pca9575@23 {
+ compatible = "nxp,pca9575";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "GP_LED9", "GP_LED10", "GP_LED11", "GP_LED12",
+ "GTX1V8PowerFault", "PHYAPowerFault", "PHYBPowerFault", "ArmPowerFault",
+ "BP_SLOW_GPIO0", "BP_SLOW_GPIO1", "BP_SLOW_GPIO2", "BP_SLOW_GPIO3",
+ "BP_SLOW_GPIO4", "BP_SLOW_GPIO5", "__unused_u59_p16", "__unused_u59_p17";
+ reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ };
+
+ tmp100@48 { compatible = "ti,tmp100"; reg = <0x48>; };
+ tmp100@4a { compatible = "ti,tmp100"; reg = <0x4a>; };
+ tmp100@4b { compatible = "ti,tmp100"; reg = <0x4b>; };
+ tmp100@4c { compatible = "ti,tmp100"; reg = <0x4c>; };
+
+ /* EEPROM bank and serial number are treated as separate devices */
+ at24c01@57 { compatible = "atmel,24c01"; reg = <0x57>; };
+ at24cs01@5f { compatible = "atmel,24cs01"; reg = <0x5f>; };
+ };
+ };
+};
+
+&i2c2 {
+ i2c-mux@71 {
+ compatible = "nxp,pca9548";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@6 {
+ /* Backplane */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ multi-master;
+
+ /* All backplanes should have this -- it's how we know they're there. */
+ at24c08@54 { compatible="atmel,24c08"; reg=<0x54>; };
+ at24cs08@5c { compatible="atmel,24cs08"; reg=<0x5c>; };
+
+ /* 16 slot backplane */
+ tmp421@4d { compatible="ti,tmp421"; reg=<0x4d>; };
+ tmp421@4e { compatible="ti,tmp421"; reg=<0x4e>; };
+ ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <2360>; };
+ amc6821@18 { compatible = "ti,amc6821"; reg = <0x18>; };
+
+ /* Single slot backplane */
+ };
+ };
+};
+
+&pincntl {
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */
+ DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */
+ DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[0] */
+ DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[1] */
+ DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[2] */
+ DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[3] */
+ DM814X_IOPAD(0x0924, PIN_INPUT_PULLUP | 0x40) /* SD1_POW */
+ DM814X_IOPAD(0x0928, PIN_INPUT | 0x40) /* SD1_SDWP */
+ DM814X_IOPAD(0x093C, PIN_INPUT | 0x2) /* SD1_SDCD */
+ >;
+ };
+
+ usb0_pins: usb0-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */
+ >;
+ };
+
+ usb1_pins: usb1-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */
+ >;
+ };
+
+ gpio1_pins: gpio1-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x081c, PIN_OUTPUT | 0x80) /* PROGRAM_B */
+ DM814X_IOPAD(0x0820, PIN_INPUT | 0x80) /* INIT_B */
+ DM814X_IOPAD(0x0824, PIN_INPUT | 0x80) /* DONE */
+
+ DM814X_IOPAD(0x0838, PIN_INPUT_PULLUP | 0x80) /* FMCA_TMS */
+ DM814X_IOPAD(0x083c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TCK */
+ DM814X_IOPAD(0x0898, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDO */
+ DM814X_IOPAD(0x089c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDI */
+ DM814X_IOPAD(0x08ac, PIN_INPUT_PULLUP | 0x80) /* FMCA_TRST */
+
+ DM814X_IOPAD(0x08b0, PIN_INPUT_PULLUP | 0x80) /* FMCB_TMS */
+ DM814X_IOPAD(0x0a88, PIN_INPUT_PULLUP | 0x80) /* FMCB_TCK */
+ DM814X_IOPAD(0x0a8c, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDO */
+ DM814X_IOPAD(0x08bc, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDI */
+ DM814X_IOPAD(0x0a94, PIN_INPUT_PULLUP | 0x80) /* FMCB_TRST */
+
+ DM814X_IOPAD(0x08d4, PIN_INPUT_PULLUP | 0x80) /* FPGA_TMS */
+ DM814X_IOPAD(0x0aa8, PIN_INPUT_PULLUP | 0x80) /* FPGA_TCK */
+ DM814X_IOPAD(0x0adc, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDO */
+ DM814X_IOPAD(0x0ab0, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDI */
+ >;
+ };
+
+ gpio2_pins: gpio2-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x090c, PIN_INPUT_PULLUP | 0x80) /* PHY A IRQ */
+ DM814X_IOPAD(0x0910, PIN_INPUT_PULLUP | 0x80) /* PHY A RESET */
+ DM814X_IOPAD(0x08f4, PIN_INPUT_PULLUP | 0x80) /* PHY B IRQ */
+ DM814X_IOPAD(0x08f8, PIN_INPUT_PULLUP | 0x80) /* PHY B RESET */
+
+ //DM814X_IOPAD(0x0a14, PIN_INPUT_PULLUP | 0x80) /* ARM IRQ */
+ //DM814X_IOPAD(0x0900, PIN_INPUT | 0x80) /* GPIO IRQ */
+ DM814X_IOPAD(0x0a2c, PIN_INPUT_PULLUP | 0x80) /* GPIO RESET */
+ >;
+ };
+
+ gpio4_pins: gpio4-pins {
+ pinctrl-single,pins = <
+ /* The PLL doesn't react well to the SPI controller reset, so
+ * we force the CS lines to pull up as GPIOs until we're ready.
+ * See https://e2e.ti.com/support/processors/f/791/t/276011?Linux-support-for-AM3874-DM8148-in-Arago-linux-omap3
+ */
+ DM814X_IOPAD(0x0b3c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO0 */
+ DM814X_IOPAD(0x0b40, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO1 */
+ DM814X_IOPAD(0x0b44, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO2 */
+ DM814X_IOPAD(0x0b48, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO3 */
+ DM814X_IOPAD(0x0b4c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO4 */
+ DM814X_IOPAD(0x0b50, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO5 */
+ >;
+ };
+
+ spi2_pins: spi2-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0950, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS1 as GPIO */
+ DM814X_IOPAD(0x0818, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS2 as GPIO */
+ >;
+ };
+
+ spi4_pins: spi4-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0a7c, 0x20)
+ DM814X_IOPAD(0x0b74, 0x20)
+ DM814X_IOPAD(0x0b78, PIN_OUTPUT | 0x20)
+ DM814X_IOPAD(0x0b7c, PIN_OUTPUT_PULLDOWN | 0x20)
+ DM814X_IOPAD(0x0b80, PIN_INPUT | 0x20)
+ >;
+ };
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_pins>;
+ gpio-line-names =
+ "", "PROGRAM_B", "INIT_B", "DONE", /* 0-3 */
+ "", "", "", "", /* 4-7 */
+ "FMCA_TMS", "FMCA_TCK", "FMCA_TDO", "FMCA_TDI", /* 8-11 */
+ "", "", "", "FMCA_TRST", /* 12-15 */
+ "FMCB_TMS", "FMCB_TCK", "FMCB_TDO", "FMCB_TDI", /* 16-19 */
+ "FMCB_TRST", "", "", "", /* 20-23 */
+ "FPGA_TMS", "FPGA_TCK", "FPGA_TDO", "FPGA_TDI", /* 24-27 */
+ "", "", "", ""; /* 28-31 */
+};
+
+&gpio2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio2_pins>;
+ gpio-line-names =
+ "PHYA_IRQ_N", "PHYA_RESET_N", "", "", /* 0-3 */
+ "", "", "", "PHYB_IRQ_N", /* 4-7 */
+ "PHYB_RESET_N", "ARM_IRQ", "GPIO_IRQ", ""; /* 8-11 */
+};
+
+&gpio3 {
+ pinctrl-names = "default";
+ /*pinctrl-0 = <&gpio3_pins>;*/
+ gpio-line-names =
+ "", "", "ARMClkSel0", "", /* 0-3 */
+ "EnFPGARef", "", "", "ARMClkSel1"; /* 4-7 */
+};
+
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio4_pins>;
+ gpio-line-names =
+ "BP_ARM_GPIO0", "BP_ARM_GPIO1", "BP_ARM_GPIO2", "BP_ARM_GPIO3",
+ "BP_ARM_GPIO4", "BP_ARM_GPIO5";
+};
+
+&usb0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
+ dr_mode = "host";
+};
+
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+ dr_mode = "host";
+};
+
+&mcspi1 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ fsbl@0 {
+ /* 256 kB */
+ label = "U-Boot-min";
+ reg = <0 0x40000>;
+ };
+ ssbl@1 {
+ /* 512 kB */
+ label = "U-Boot";
+ reg = <0x40000 0x80000>;
+ };
+ bootenv@2 {
+ /* 256 kB */
+ label = "U-Boot Env";
+ reg = <0xc0000 0x40000>;
+ };
+ kernel@3 {
+ /* 4 MB */
+ label = "Kernel";
+ reg = <0x100000 0x400000>;
+ };
+ ipmi@4 {
+ label = "IPMI FRU";
+ reg = <0x500000 0x40000>;
+ };
+ fs@5 {
+ label = "File System";
+ reg = <0x540000 0x1ac0000>;
+ };
+ };
+};
+
+&mcspi3 {
+ /* DMA event numbers stolen from MCASP */
+ dmas = <&edma_xbar 8 0 16 &edma_xbar 9 0 17
+ &edma_xbar 10 0 18 &edma_xbar 11 0 19>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+};
+
+&mcspi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi4_pins>;
+
+ /* DMA event numbers stolen from MCASP, MCBSP */
+ dmas = <&edma_xbar 12 0 20 &edma_xbar 13 0 21>;
+ dma-names = "tx0", "rx0";
+};
diff --git a/src/arm/ti/omap/am4372.dtsi b/src/arm/ti/omap/am4372.dtsi
new file mode 100644
index 0000000..9d2c064
--- /dev/null
+++ b/src/arm/ti/omap/am4372.dtsi
@@ -0,0 +1,806 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for AM4372 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/am4.h>
+
+/ {
+ compatible = "ti,am4372", "ti,am43";
+ interrupt-parent = <&wakeupgen>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0>;
+ };
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ ethernet0 = &cpsw_port1;
+ ethernet1 = &cpsw_port2;
+ spi0 = &qspi;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu: cpu@0 {
+ compatible = "arm,cortex-a9";
+ enable-method = "ti,am4372";
+ device_type = "cpu";
+ reg = <0>;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ operating-points-v2 = <&cpu0_opp_table>;
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+ cpu-idle-states = <&mpu_gate>;
+ };
+
+ idle-states {
+ mpu_gate: mpu_gate {
+ compatible = "arm,idle-state";
+ entry-latency-us = <40>;
+ exit-latency-us = <100>;
+ min-residency-us = <300>;
+ local-timer-stop;
+ };
+ };
+ };
+
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ syscon = <&scm_conf>;
+
+ opp-50-300000000 {
+ /* OPP50 */
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <950000 931000 969000>;
+ opp-supported-hw = <0xFF 0x01>;
+ opp-suspend;
+ };
+
+ opp-100-600000000 {
+ /* OPP100 */
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0xFF 0x04>;
+ };
+
+ opp-120-720000000 {
+ /* OPP120 */
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <1200000 1176000 1224000>;
+ opp-supported-hw = <0xFF 0x08>;
+ };
+
+ opp-800000000{
+ /* OPP Turbo */
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1260000 1234800 1285200>;
+ opp-supported-hw = <0xFF 0x10>;
+ };
+
+ opp-1000000000 {
+ /* OPP Nitro */
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1325000 1298500 1351500>;
+ opp-supported-hw = <0xFF 0x20>;
+ };
+ };
+
+ soc {
+ compatible = "ti,omap-infra";
+ };
+
+ gic: interrupt-controller@48241000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48241000 0x1000>,
+ <0x48240100 0x0100>;
+ interrupt-parent = <&gic>;
+ };
+
+ wakeupgen: interrupt-controller@48281000 {
+ compatible = "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48281000 0x1000>;
+ interrupt-parent = <&gic>;
+ };
+
+ scu: scu@48240000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x48240000 0x100>;
+ };
+
+ global_timer: timer@48240200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x48240200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gic>;
+ clocks = <&mpu_periphclk>;
+ };
+
+ local_timer: timer@48240600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x48240600 0x100>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gic>;
+ clocks = <&mpu_periphclk>;
+ };
+
+ cache-controller@48242000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x48242000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ ocp@44000000 {
+ compatible = "simple-pm-bus";
+ power-domains = <&prm_per>;
+ clocks = <&l3_clkctrl AM4_L3_L3_MAIN_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,no-idle;
+
+ l3-noc@44000000 {
+ compatible = "ti,am4372-l3-noc";
+ reg = <0x44000000 0x400000>,
+ <0x44800000 0x400000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ l4_wkup: interconnect@44c00000 {
+ };
+ l4_per: interconnect@48000000 {
+ };
+ l4_fast: interconnect@4a000000 {
+ };
+
+ target-module@4c000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x4c000000 0x4>;
+ reg-names = "rev";
+ clocks = <&emif_clkctrl AM4_EMIF_EMIF_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4c000000 0x1000000>;
+
+ emif: emif@0 {
+ compatible = "ti,emif-am4372";
+ reg = <0 0x1000000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ sram = <&pm_sram_code
+ &pm_sram_data>;
+ };
+ };
+
+ target-module@49000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49000000 0x4>;
+ reg-names = "rev";
+ clocks = <&l3_clkctrl AM4_L3_TPCC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49000000 0x10000>;
+
+ edma: dma@0 {
+ compatible = "ti,edma3-tpcc";
+ reg = <0 0x10000>;
+ reg-names = "edma3_cc";
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_ccint", "edma3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+ <&edma_tptc2 0>;
+
+ ti,edma-memcpy-channels = <58 59>;
+ };
+ };
+
+ target-module@49800000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49800000 0x4>,
+ <0x49800010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&l3_clkctrl AM4_L3_TPTC0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49800000 0x100000>;
+
+ edma_tptc0: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@49900000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49900000 0x4>,
+ <0x49900010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&l3_clkctrl AM4_L3_TPTC1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49900000 0x100000>;
+
+ edma_tptc1: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@49a00000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49a00000 0x4>,
+ <0x49a00010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&l3_clkctrl AM4_L3_TPTC2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49a00000 0x100000>;
+
+ edma_tptc2: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@47810000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x478102fc 0x4>,
+ <0x47810110 0x4>,
+ <0x47810114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x47810000 0x1000>;
+
+ mmc3: mmc@0 {
+ compatible = "ti,am437-sdhci";
+ ti,needs-special-reset;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ sham_target: target-module@53100000 {
+ compatible = "ti,sysc-omap3-sham", "ti,sysc";
+ reg = <0x53100100 0x4>,
+ <0x53100110 0x4>,
+ <0x53100114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l3_clkdm */
+ clocks = <&l3_clkctrl AM4_L3_SHAM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x53100000 0x1000>;
+
+ sham: sham@0 {
+ compatible = "ti,omap5-sham";
+ reg = <0 0x300>;
+ dmas = <&edma 36 0>;
+ dma-names = "rx";
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ aes_target: target-module@53501000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x53501080 0x4>,
+ <0x53501084 0x4>,
+ <0x53501088 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l3_clkdm */
+ clocks = <&l3_clkctrl AM4_L3_AES_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x53501000 0x1000>;
+
+ aes: aes@0 {
+ compatible = "ti,omap4-aes";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma 6 0>,
+ <&edma 5 0>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ des_target: target-module@53701000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x53701030 0x4>,
+ <0x53701034 0x4>,
+ <0x53701038 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l3_clkdm */
+ clocks = <&l3_clkctrl AM4_L3_DES_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x53701000 0x1000>;
+
+ des: des@0 {
+ compatible = "ti,omap4-des";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma 34 0>,
+ <&edma 33 0>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ pruss_tm: target-module@54400000 {
+ compatible = "ti,sysc-pruss", "ti,sysc";
+ reg = <0x54426000 0x4>,
+ <0x54426004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+ SYSC_PRUSS_SUB_MWAIT)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&pruss_ocp_clkctrl AM4_PRUSS_OCP_PRUSS_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_per 1>;
+ reset-names = "rstctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x54400000 0x80000>;
+
+ pruss1: pruss@0 {
+ compatible = "ti,am4376-pruss1";
+ reg = <0x0 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pruss1_mem: memories@0 {
+ reg = <0x0 0x2000>,
+ <0x2000 0x2000>,
+ <0x10000 0x8000>;
+ reg-names = "dram0", "dram1",
+ "shrdram2";
+ };
+
+ pruss1_cfg: cfg@26000 {
+ compatible = "ti,pruss-cfg", "syscon";
+ reg = <0x26000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x2000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pruss1_iepclk_mux: iepclk-mux@30 {
+ reg = <0x30>;
+ #clock-cells = <0>;
+ clocks = <&sysclk_div>, /* icss_iep_gclk */
+ <&pruss_ocp_gclk>; /* icss_ocp_gclk */
+ };
+ };
+ };
+
+ pruss1_mii_rt: mii-rt@32000 {
+ compatible = "ti,pruss-mii", "syscon";
+ reg = <0x32000 0x58>;
+ };
+
+ pruss1_intc: interrupt-controller@20000 {
+ compatible = "ti,pruss-intc";
+ reg = <0x20000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host_intr0", "host_intr1",
+ "host_intr2", "host_intr3",
+ "host_intr4",
+ "host_intr6", "host_intr7";
+ ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+ };
+
+ pru1_0: pru@34000 {
+ compatible = "ti,am4376-pru";
+ reg = <0x34000 0x3000>,
+ <0x22000 0x400>,
+ <0x22400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am437x-pru1_0-fw";
+ };
+
+ pru1_1: pru@38000 {
+ compatible = "ti,am4376-pru";
+ reg = <0x38000 0x3000>,
+ <0x24000 0x400>,
+ <0x24400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am437x-pru1_1-fw";
+ };
+
+ pruss1_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ reg = <0x32400 0x90>;
+ clocks = <&dpll_core_m4_ck>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ pruss0: pruss@40000 {
+ compatible = "ti,am4376-pruss0";
+ reg = <0x40000 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pruss0_mem: memories@40000 {
+ reg = <0x40000 0x1000>,
+ <0x42000 0x1000>;
+ reg-names = "dram0", "dram1";
+ };
+
+ pruss0_cfg: cfg@66000 {
+ compatible = "ti,pruss-cfg", "syscon";
+ reg = <0x66000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x66000 0x2000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pruss0_iepclk_mux: iepclk-mux@30 {
+ reg = <0x30>;
+ #clock-cells = <0>;
+ clocks = <&sysclk_div>, /* icss_iep_gclk */
+ <&pruss_ocp_gclk>; /* icss_ocp_gclk */
+ };
+ };
+ };
+
+ pruss0_mii_rt: mii-rt@72000 {
+ compatible = "ti,pruss-mii", "syscon";
+ reg = <0x72000 0x58>;
+ status = "disabled";
+ };
+
+ pruss0_intc: interrupt-controller@60000 {
+ compatible = "ti,pruss-intc";
+ reg = <0x60000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host_intr0", "host_intr1",
+ "host_intr2", "host_intr3",
+ "host_intr4",
+ "host_intr6", "host_intr7";
+ ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+ };
+
+ pru0_0: pru@74000 {
+ compatible = "ti,am4376-pru";
+ reg = <0x74000 0x1000>,
+ <0x62000 0x400>,
+ <0x62400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am437x-pru0_0-fw";
+ };
+
+ pru0_1: pru@78000 {
+ compatible = "ti,am4376-pru";
+ reg = <0x78000 0x1000>,
+ <0x64000 0x400>,
+ <0x64400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am437x-pru0_1-fw";
+ };
+ };
+ };
+
+ target-module@50000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x50000000 4>,
+ <0x50000010 4>,
+ <0x50000014 4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&l3s_clkctrl AM4_L3S_GPMC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
+ <0x00000000 0x00000000 0x40000000>; /* data */
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ dmas = <&edma 52 0>;
+ dma-names = "rxtx";
+ clocks = <&l3s_gclk>;
+ clock-names = "fck";
+ reg = <0x50000000 0x2000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ gpmc,num-cs = <7>;
+ gpmc,num-waitpins = <2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+ };
+
+ target-module@47900000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x47900000 0x4>,
+ <0x47900010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ clocks = <&l3s_clkctrl AM4_L3S_QSPI_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x47900000 0x1000>,
+ <0x30000000 0x30000000 0x4000000>;
+
+ qspi: spi@0 {
+ compatible = "ti,am4372-qspi";
+ reg = <0 0x100>,
+ <0x30000000 0x4000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ clocks = <&dpll_per_m2_div4_ck>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 138 0x4>;
+ num-cs = <4>;
+ };
+ };
+
+ target-module@40300000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ clocks = <&l3_clkctrl AM4_L3_OCMCRAM_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x40300000 0x40000>;
+
+ ocmcram: sram@0 {
+ compatible = "mmio-sram";
+ reg = <0 0x40000>; /* 256k */
+ ranges = <0 0 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pm_sram_code: pm-code-sram@0 {
+ compatible = "ti,sram";
+ reg = <0x0 0x1000>;
+ protect-exec;
+ };
+
+ pm_sram_data: pm-data-sram@1000 {
+ compatible = "ti,sram";
+ reg = <0x1000 0x1000>;
+ pool;
+ };
+ };
+ };
+
+ target-module@56000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x5600fe00 0x4>,
+ <0x5600fe10 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>;
+ clock-names = "fck";
+ power-domains = <&prm_gfx>;
+ resets = <&prm_gfx 0>;
+ reset-names = "rstctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x56000000 0x1000000>;
+ };
+ };
+};
+
+#include "am437x-l4.dtsi"
+#include "am43xx-clocks.dtsi"
+
+&prcm {
+ prm_mpu: prm@300 {
+ compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x300 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_gfx: prm@400 {
+ compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x400 0x100>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
+
+ prm_rtc: prm@500 {
+ compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x500 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_tamper: prm@600 {
+ compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x600 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_cefuse: prm@700 {
+ compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x700 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_per: prm@800 {
+ compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x800 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_wkup: prm@2000 {
+ compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x2000 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_device: prm@4000 {
+ compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x4000 0x100>;
+ #reset-cells = <1>;
+ };
+};
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_TIMER1_CLKCTRL 0>,
+ <&l4_wkup_clkctrl AM4_L4_WKUP_L4_WKUP_CLKCTRL 0>;
+ clock-names = "fck", "ick";
+ timer@0 {
+ assigned-clocks = <&timer1_fck>;
+ assigned-clock-parents = <&sys_clkin_ck>;
+ };
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ clocks = <&l4ls_clkctrl AM4_L4LS_TIMER2_CLKCTRL 0>,
+ <&l4ls_clkctrl AM4_L4LS_L4_LS_CLKCTRL 0>;
+ clock-names = "fck", "ick";
+ timer@0 {
+ assigned-clocks = <&timer2_fck>;
+ assigned-clock-parents = <&sys_clkin_ck>;
+ };
+};
diff --git a/src/arm/ti/omap/am437x-cm-t43.dts b/src/arm/ti/omap/am437x-cm-t43.dts
new file mode 100644
index 0000000..9ec75d0
--- /dev/null
+++ b/src/arm/ti/omap/am437x-cm-t43.dts
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am4372.dtsi"
+
+/ {
+ model = "CompuLab CM-T43";
+ compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
+
+ leds {
+ compatible = "gpio-leds";
+
+ ledb {
+ label = "cm-t43:green";
+ gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vmmc_3v3: fixedregulator-v3_3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ enable-active-high;
+ };
+};
+
+&am43xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cm_t43_led_pins>;
+
+ cm_t43_led_pins: cm-t43-led-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xa78, MUX_MODE7)
+ >;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ emmc_pins: emmc-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0 */
+ AM4372_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1 */
+ AM4372_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2 */
+ AM4372_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3 */
+ AM4372_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad12.mmc1_dat4 */
+ AM4372_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad13.mmc1_dat5 */
+ AM4372_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad14.mmc1_dat6 */
+ AM4372_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad15.mmc1_dat7 */
+ AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ >;
+ };
+
+ spi0_pins: spi0-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+ AM4372_IOPAD(0x954, PIN_INPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ AM4372_IOPAD(0x958, PIN_OUTPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ AM4372_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ >;
+ };
+
+ nand_flash_x8: nand-flash-x8-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x800, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x804, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x808, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x80c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x810, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x814, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x818, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x81c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x898, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM4372_IOPAD(0x894, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM4372_IOPAD(0x890, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM4372_IOPAD(0x89c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */
+ AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */
+ AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */
+ AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
+ AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
+ AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
+ AM4372_IOPAD(0xa74, MUX_MODE3)
+ /* Slave 2 */
+ AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.txen */
+ AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rxctl */
+ AM4372_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.txd3 */
+ AM4372_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.txd2 */
+ AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.txd1 */
+ AM4372_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.txd0 */
+ AM4372_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.tclk */
+ AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rclk */
+ AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rxd3 */
+ AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rxd2 */
+ AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rxd1 */
+ AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rxd0 */
+ AM4372_IOPAD(0xa38, MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+};
+
+&gpmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_flash_x8>;
+ ranges = <0 0 0x08000000 0x1000000>;
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* MTD partition table */
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x00980000>;
+ };
+ partition@980000 {
+ label = "dtb";
+ reg = <0x00980000 0x00080000>;
+ };
+ partition@a00000 {
+ label = "rootfs";
+ reg = <0x00a00000 0x0>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <100000>;
+
+ tps65218: tps65218@24 {
+ compatible = "ti,tps65218";
+ reg = <0x24>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ dcdc1: regulator-dcdc1 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2: regulator-dcdc2 {
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1378000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3: regulator-dcdc3 {
+ regulator-name = "vdcdc3";
+ regulator-suspend-enable;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc5: regulator-dcdc5 {
+ regulator-name = "v1_0bat";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc6: regulator-dcdc6 {
+ regulator-name = "v1_8bat";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: regulator-ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+
+ eeprom_module: at24@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&gpio4 {
+ status = "okay";
+};
+
+&gpio5 {
+ status = "okay";
+};
+
+&mmc2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ vmmc-supply = <&vmmc_3v3>;
+ bus-width = <8>;
+ non-removable;
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ dmas = <&edma 16 0
+ &edma 17 0>;
+ dma-names = "tx0", "rx0";
+
+ flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0xc0000>;
+ };
+
+ partition@c0000 {
+ label = "uboot environment";
+ reg = <0xc0000 0x40000>;
+ };
+
+ partition@100000 {
+ label = "reserved";
+ reg = <0x100000 0x100000>;
+ };
+ };
+};
+
+&mac_sw {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpsw_default>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default";
+ pinctrl-0 = <&davinci_mdio_default>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-txid";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii-txid";
+ ti,dual-emac-pvid = <2>;
+};
+
+&dwc3_1 {
+ status = "okay";
+};
+
+&usb2_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&dwc3_2 {
+ status = "okay";
+};
+
+&usb2_phy2 {
+ status = "okay";
+};
+
+&usb2 {
+ dr_mode = "host";
+ status = "okay";
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral", "host", "otg";
+};
+
+&elm {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&tscadc {
+ status = "okay";
+ tsc {
+ ti,wires = <4>;
+ ti,x-plate-resistance = <200>;
+ ti,coordinate-readouts = <5>;
+ ti,wire-config = <0x00 0x11 0x22 0x33>;
+ };
+
+ adc {
+ ti,adc-channels = <4 5 6 7>;
+ };
+};
+
+&cpu {
+ cpu0-supply = <&dcdc2>;
+ operating-points = <1000000 1330000>,
+ <800000 1260000>,
+ <720000 1200000>,
+ <600000 1100000>,
+ <300000 950000>;
+};
+
+&pruss1_mdio {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/am437x-gp-evm.dts b/src/arm/ti/omap/am437x-gp-evm.dts
new file mode 100644
index 0000000..f7aad03
--- /dev/null
+++ b/src/arm/ti/omap/am437x-gp-evm.dts
@@ -0,0 +1,1137 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/* AM437x GP EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "TI AM437x GP EVM";
+ compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
+
+ aliases {
+ display0 = &lcd0;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ evm_v3_3d: fixedregulator-v3_3d {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_v3_3d";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ };
+
+ vtt_fixed: fixedregulator-vtt {
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_fixed";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ vmmcwl_fixed: fixedregulator-mmcwl {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcwl_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ lcd_bl: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
+
+ matrix_keypad: matrix_keypad0 {
+ compatible = "gpio-matrix-keypad";
+ debounce-delay-ms = <5>;
+ col-scan-delay-us = <2>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&matrix_keypad_default>;
+ pinctrl-1 = <&matrix_keypad_sleep>;
+
+ wakeup-source;
+
+ row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */
+ &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
+ &gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
+
+ col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
+ &gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
+
+ linux,keymap = <0x00000201 /* P1 */
+ 0x00010202 /* P2 */
+ 0x01000067 /* UP */
+ 0x0101006a /* RIGHT */
+ 0x02000069 /* LEFT */
+ 0x0201006c>; /* DOWN */
+ };
+
+ lcd0: display {
+ compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
+ label = "lcd";
+
+ backlight = <&lcd_bl>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
+ /* fixed 12MHz oscillator */
+ refclk: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+
+ /* fixed 32k external oscillator clock */
+ clk_32k_rtc: clk_32k_rtc {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ sound0: sound0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "AM437x-GP-EVM";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound0_master>;
+ simple-audio-card,frame-master = <&sound0_master>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp1>;
+ system-clock-frequency = <12000000>;
+ };
+
+ sound0_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ system-clock-frequency = <12000000>;
+ };
+ };
+
+ beeper: beeper {
+ compatible = "gpio-beeper";
+ pinctrl-names = "default";
+ pinctrl-0 = <&beeper_pins_default>;
+ pinctrl-1 = <&beeper_pins_sleep>;
+ gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&am43xx_pinmux {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default &unused_pins &debugss_pins>;
+ pinctrl-1 = <&wlan_pins_sleep>;
+
+ ddr3_vtt_toggle_default: ddr-vtt-toggle-default-pins {
+ pinctrl-single,pins = <
+ 0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) /* spi0_cs0.gpio5_7 */
+ >;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
+ ecap0_pins: backlight-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+ >;
+ };
+
+ pixcir_ts_pins: pixcir-ts-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */
+ AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */
+ AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */
+ AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
+ AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
+ AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
+ >;
+ };
+
+ cpsw_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci-mdio-sleep-pins {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ nand_flash_x8: nand-flash-x8-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x800, PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM4372_IOPAD(0x804, PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM4372_IOPAD(0x808, PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM4372_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM4372_IOPAD(0x810, PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM4372_IOPAD(0x814, PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM4372_IOPAD(0x818, PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM4372_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
+ AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ >;
+ };
+
+ dss_pins: dss-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+ AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+ AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+ AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+ AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+ AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+ AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+ AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+
+ >;
+ };
+
+ display_mux_pins: display-mux-pins {
+ pinctrl-single,pins = <
+ /* GPIO 5_8 to select LCD / HDMI */
+ AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
+ dcan0_default: dcan0-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */
+ AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */
+ >;
+ };
+
+ dcan0_sleep: dcan0-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */
+ AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */
+ >;
+ };
+
+ dcan1_default: dcan1-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */
+ AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */
+ >;
+ };
+
+ dcan1_sleep: dcan1-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */
+ AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */
+ >;
+ };
+
+ vpfe0_pins_default: vpfe0-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
+ AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
+ AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
+ AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
+ AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
+ AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
+ AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
+ AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
+ AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
+ AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
+ AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
+ AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
+ AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
+ >;
+ };
+
+ vpfe0_pins_sleep: vpfe0-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/
+ AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/
+ AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/
+ AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/
+ AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/
+ AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/
+ AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/
+ AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/
+ AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/
+ AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/
+ AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/
+ AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/
+ AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/
+ >;
+ };
+
+ vpfe1_pins_default: vpfe1-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/
+ AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/
+ AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/
+ AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/
+ AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/
+ AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/
+ AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/
+ AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/
+ AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/
+ AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/
+ AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/
+ AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/
+ AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/
+ >;
+ };
+
+ vpfe1_pins_sleep: vpfe1-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/
+ AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/
+ AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/
+ AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/
+ AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/
+ AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/
+ AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/
+ AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/
+ AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/
+ AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/
+ AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/
+ AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/
+ AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/
+ >;
+ };
+
+ mmc3_pins_default: mmc3-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */
+ AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
+ AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
+ AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
+ AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */
+ >;
+ };
+
+ mmc3_pins_sleep: mmc3-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */
+ AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */
+ AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */
+ AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */
+ AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */
+ AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */
+ >;
+ };
+
+ wlan_pins_default: wlan-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
+ AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
+ AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
+ >;
+ };
+
+ wlan_pins_sleep: wlan-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
+ AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
+ AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */
+ AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
+ AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */
+ AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
+ >;
+ };
+
+ mcasp1_pins: mcasp1-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ >;
+ };
+
+ mcasp1_sleep_pins: mcasp1-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ gpio0_pins: gpio0-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
+ >;
+ };
+
+ emmc_pins_default: emmc-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ >;
+ };
+
+ emmc_pins_sleep: emmc-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
+ AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
+ AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
+ AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
+ AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
+ AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
+ AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
+ AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
+ AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
+ AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
+ >;
+ };
+
+ beeper_pins_default: beeper-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_field.gpio4_12 */
+ >;
+ };
+
+ beeper_pins_sleep: beeper-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* cam1_field.gpio4_12 */
+ >;
+ };
+
+ unused_pins: unused-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa3c, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
+ AM4372_IOPAD(0xa40, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa44, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa48, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa4c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa50, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa54, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
+ AM4372_IOPAD(0xa58, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa60, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
+ AM4372_IOPAD(0xa68, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa70, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa78, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa7c, PIN_INPUT | PULL_DISABLE)
+ AM4372_IOPAD(0xac8, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xad4, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xad8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xadc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xae0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xae4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xae8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xaec, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xaf0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xaf4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xaf8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xafc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb00, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb04, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb08, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb0c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb10, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb14, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb18, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ debugss_pins: debugss-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xa90, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xa94, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xa98, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xa9c, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xaa0, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xaa4, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xaa8, PIN_INPUT_PULLDOWN)
+ >;
+ };
+
+ uart0_pins_default: uart0-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
+ AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
+ AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ uart0_pins_sleep: uart0-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_ctsn.uart0_ctsn */
+ AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_rtsn.uart0_rtsn */
+ AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM4372_IOPAD(0x974, PIN_INPUT_PULLDOWN | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ matrix_keypad_default: matrix-keypad-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7)
+ AM4372_IOPAD(0x9a8, PIN_OUTPUT | MUX_MODE7)
+ AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9)
+ AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ matrix_keypad_sleep: matrix-keypad-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9a4, PULL_UP | MUX_MODE7)
+ AM4372_IOPAD(0x9a8, PULL_UP | MUX_MODE7)
+ AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9)
+ AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart0_pins_default>;
+ pinctrl-1 = <&uart0_pins_sleep>;
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <100000>;
+
+ tps65218: tps65218@24 {
+ reg = <0x24>;
+ compatible = "ti,tps65218";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ dcdc1: regulator-dcdc1 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2: regulator-dcdc2 {
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1378000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3: regulator-dcdc3 {
+ regulator-name = "vdcdc3";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ regulator-state-disk {
+ regulator-off-in-suspend;
+ };
+ };
+
+ dcdc5: regulator-dcdc5 {
+ regulator-name = "v1_0bat";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ dcdc6: regulator-dcdc6 {
+ regulator-name = "v1_8bat";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo1: regulator-ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+
+ ov2659@30 {
+ compatible = "ovti,ov2659";
+ reg = <0x30>;
+
+ clocks = <&refclk 0>;
+ clock-names = "xvclk";
+
+ port {
+ ov2659_0: endpoint {
+ remote-endpoint = <&vpfe1_ep>;
+ link-frequencies = /bits/ 64 <70000000>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ pixcir_ts@5c {
+ compatible = "pixcir,pixcir_tangoc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pixcir_ts_pins>;
+ reg = <0x5c>;
+
+ attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+
+ /*
+ * 0x264 represents the offset of padconf register of
+ * gpio3_22 from am43xx_pinmux base.
+ */
+ interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>,
+ <&am43xx_pinmux 0x264>;
+ interrupt-names = "tsc", "wakeup";
+
+ touchscreen-size-x = <1024>;
+ touchscreen-size-y = <600>;
+ wakeup-source;
+ };
+
+ ov2659@30 {
+ compatible = "ovti,ov2659";
+ reg = <0x30>;
+
+ clocks = <&refclk 0>;
+ clock-names = "xvclk";
+
+ port {
+ ov2659_1: endpoint {
+ remote-endpoint = <&vpfe0_ep>;
+ link-frequencies = /bits/ 64 <70000000>;
+ };
+ };
+ };
+
+ tlv320aic3106: tlv320aic3106@1b {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x1b>;
+ status = "okay";
+
+ /* Regulators */
+ IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */
+ AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
+ DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
+ DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */
+ };
+};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&tscadc {
+ status = "okay";
+
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
+};
+
+&magadc {
+ status = "okay";
+
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
+};
+
+&ecap0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins>;
+};
+
+&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio0_pins>;
+ status = "okay";
+
+ sel-emmc-nand-hog {
+ gpio-hog;
+ gpios = <23 GPIO_ACTIVE_HIGH>;
+ /* SelEMMCorNAND selects between eMMC and NAND:
+ * Low: NAND
+ * High: eMMC
+ * When changing this line make sure the newly
+ * selected device node is enabled and the previously
+ * selected device node is disabled.
+ */
+ output-low;
+ line-name = "SelEMMCorNAND";
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&gpio4 {
+ status = "okay";
+};
+
+&gpio5_target {
+ ti,no-reset-on-init;
+};
+
+&gpio5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&display_mux_pins>;
+ status = "okay";
+
+ sel-lcd-hdmi-hog {
+ /*
+ * SelLCDorHDMI selects between display and audio paths:
+ * Low: HDMI display with audio via HDMI
+ * High: LCD display with analog audio via aic3111 codec
+ */
+ gpio-hog;
+ gpios = <8 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "SelLCDorHDMI";
+ };
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&evm_v3_3d>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+/* eMMC sits on mmc2 */
+&mmc2 {
+ /*
+ * When enabling eMMC, disable GPMC/NAND and set
+ * SelEMMCorNAND to output-high
+ */
+ status = "disabled";
+ vmmc-supply = <&evm_v3_3d>;
+ bus-width = <8>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&emmc_pins_default>;
+ pinctrl-1 = <&emmc_pins_sleep>;
+ non-removable;
+};
+
+&mmc3 {
+ status = "okay";
+ /* these are on the crossbar and are outlined in the
+ xbar-event-map element */
+ dmas = <&edma_xbar 30 0 1>,
+ <&edma_xbar 31 0 2>;
+ dma-names = "tx", "rx";
+ vmmc-supply = <&vmmcwl_fixed>;
+ bus-width = <4>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mmc3_pins_default>;
+ pinctrl-1 = <&mmc3_pins_sleep>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ non-removable;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@0 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <23 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&usb2_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb2_phy2 {
+ status = "okay";
+};
+
+&usb2 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-rxid";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ /*
+ * When enabling GPMC, disable eMMC and set
+ * SelEMMCorNAND to output-low
+ */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_flash_x8>;
+ ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* device IO registers */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ ti,nand-xfer-type = "prefetch-dma";
+ ti,nand-ecc-opt = "bch16";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <40>;
+ gpmc,cs-wr-off-ns = <40>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <25>;
+ gpmc,adv-wr-off-ns = <25>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <20>;
+ gpmc,oe-on-ns = <3>;
+ gpmc,oe-off-ns = <30>;
+ gpmc,access-ns = <30>;
+ gpmc,rd-cycle-ns = <40>;
+ gpmc,wr-cycle-ns = <40>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ /* MTD partition table */
+ /* All SPL-* partitions are sized to minimal length
+ * which can be independently programmable. For
+ * NAND flash this is equal to size of erase-block */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "NAND.SPL";
+ reg = <0x00000000 0x00040000>;
+ };
+ partition@1 {
+ label = "NAND.SPL.backup1";
+ reg = <0x00040000 0x00040000>;
+ };
+ partition@2 {
+ label = "NAND.SPL.backup2";
+ reg = <0x00080000 0x00040000>;
+ };
+ partition@3 {
+ label = "NAND.SPL.backup3";
+ reg = <0x000c0000 0x00040000>;
+ };
+ partition@4 {
+ label = "NAND.u-boot-spl-os";
+ reg = <0x00100000 0x00080000>;
+ };
+ partition@5 {
+ label = "NAND.u-boot";
+ reg = <0x00180000 0x00100000>;
+ };
+ partition@6 {
+ label = "NAND.u-boot-env";
+ reg = <0x00280000 0x00040000>;
+ };
+ partition@7 {
+ label = "NAND.u-boot-env.backup1";
+ reg = <0x002c0000 0x00040000>;
+ };
+ partition@8 {
+ label = "NAND.kernel";
+ reg = <0x00300000 0x00700000>;
+ };
+ partition@9 {
+ label = "NAND.file-system";
+ reg = <0x00a00000 0x1f600000>;
+ };
+ };
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_pins>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&dcan0 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&dcan0_default>;
+ pinctrl-1 = <&dcan0_sleep>;
+ status = "okay";
+};
+
+&dcan1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&dcan1_default>;
+ pinctrl-1 = <&dcan1_sleep>;
+ status = "okay";
+};
+
+&vpfe0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe0_pins_default>;
+ pinctrl-1 = <&vpfe0_pins_sleep>;
+
+ port {
+ vpfe0_ep: endpoint {
+ remote-endpoint = <&ov2659_1>;
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
+
+&vpfe1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe1_pins_default>;
+ pinctrl-1 = <&vpfe1_pins_sleep>;
+
+ port {
+ vpfe1_ep: endpoint {
+ remote-endpoint = <&ov2659_0>;
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
+
+&mcasp1 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp1_pins>;
+ pinctrl-1 = <&mcasp1_sleep_pins>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializers */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 1 2
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+&rtc {
+ clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
+ clock-names = "ext-clk", "int-clk";
+ status = "okay";
+};
+
+&cpu {
+ cpu0-supply = <&dcdc2>;
+};
+
+&wkup_m3_ipc {
+ ti,set-io-isolation;
+ firmware-name = "am43x-evm-scale-data.bin";
+};
+
+&pruss1_mdio {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/am437x-idk-evm.dts b/src/arm/ti/omap/am437x-idk-evm.dts
new file mode 100644
index 0000000..00682ce
--- /dev/null
+++ b/src/arm/ti/omap/am437x-idk-evm.dts
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "TI AM437x Industrial Development Kit";
+ compatible = "ti,am437x-idk-evm","ti,am4372","ti,am43";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ v24_0d: fixed-regulator-v24_0d {
+ compatible = "regulator-fixed";
+ regulator-name = "V24_0D";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ v3_3d: fixed-regulator-v3_3d {
+ compatible = "regulator-fixed";
+ regulator-name = "V3_3D";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&v24_0d>;
+ };
+
+ vdd_corereg: fixed-regulator-vdd_corereg {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_COREREG";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&v24_0d>;
+ };
+
+ vdd_core: fixed-regulator-vdd_core {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_CORE";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_corereg>;
+ };
+
+ v1_8dreg: fixed-regulator-v1_8dreg {
+ compatible = "regulator-fixed";
+ regulator-name = "V1_8DREG";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&v24_0d>;
+ };
+
+ v1_8d: fixed-regulator-v1_8d {
+ compatible = "regulator-fixed";
+ regulator-name = "V1_8D";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&v1_8dreg>;
+ };
+
+ v1_5dreg: fixed-regulator-v1_5dreg {
+ compatible = "regulator-fixed";
+ regulator-name = "V1_5DREG";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&v24_0d>;
+ };
+
+ v1_5d: fixed-regulator-v1_5d {
+ compatible = "regulator-fixed";
+ regulator-name = "V1_5D";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&v1_5dreg>;
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pins_default>;
+
+ switch-0 {
+ label = "power-button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ /* fixed 32k external oscillator clock */
+ clk_32k_rtc: clk_32k_rtc {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ leds-iio {
+ status = "disabled";
+ compatible = "gpio-leds";
+ led-out0 {
+ label = "out0";
+ gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out1 {
+ label = "out1";
+ gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out2 {
+ label = "out2";
+ gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out3 {
+ label = "out3";
+ gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out4 {
+ label = "out4";
+ gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out5 {
+ label = "out5";
+ gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out6 {
+ label = "out6";
+ gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out7 {
+ label = "out7";
+ gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+};
+
+&am43xx_pinmux {
+ gpio_keys_pins_default: gpio-keys-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9b8, PIN_INPUT | MUX_MODE7) /* cam0_field.gpio4_2 */
+ >;
+ };
+
+ i2c0_pins_default: i2c0-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ i2c0_pins_sleep: i2c0-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ i2c2_pins_default: i2c2-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9e8, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
+ AM4372_IOPAD(0x9ec, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
+ >;
+ };
+
+ i2c2_pins_sleep: i2c2-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins_default: mmc1-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM4372_IOPAD(0x9f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM4372_IOPAD(0x9f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM4372_IOPAD(0x9f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM4372_IOPAD(0x9fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
+ mmc1_pins_sleep: mmc1-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x900, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x904, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x960, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ spi1_pins_default: spi1-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x908, PIN_INPUT | MUX_MODE2) /* mii1_col.spi1_sclk */
+ AM4372_IOPAD(0x910, PIN_INPUT | MUX_MODE2) /* mii1_rx_er.spi1_d1 */
+ AM4372_IOPAD(0x944, PIN_OUTPUT | MUX_MODE2) /* rmii1_ref_clk.spi1_cs0 */
+ AM4372_IOPAD(0x90c, PIN_OUTPUT | MUX_MODE7) /* mii1_crs.gpio3_1 */
+ >;
+ };
+
+ spi1_pins_sleep: spi1-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ ecap0_pins_default: backlight-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
+ AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
+ >;
+ };
+
+ cpsw_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci-mdio-sleep-pins {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ qspi_pins_default: qspi-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */
+ AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
+ AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
+ AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
+ AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */
+ AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
+ >;
+ };
+
+ qspi_pins_sleep: qspi-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x87c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x898, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c0_pins_default>;
+ pinctrl-1 = <&i2c0_pins_sleep>;
+ clock-frequency = <400000>;
+
+ at24@50 {
+ compatible = "atmel,24c256";
+ pagesize = <64>;
+ reg = <0x50>;
+ };
+
+ tps: tps62362@60 {
+ compatible = "ti,tps62362";
+ reg = <0x60>;
+ regulator-name = "VDD_MPU";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1330000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,vsel0-state-high;
+ ti,vsel1-state-high;
+ vin-supply = <&v3_3d>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_pins_default>;
+ pinctrl-1 = <&i2c2_pins_sleep>;
+ clock-frequency = <100000>;
+
+ tpic2810: tpic2810@60 {
+ compatible = "ti,tpic2810";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi1_pins_default>;
+ pinctrl-1 = <&spi1_pins_sleep>;
+ ti,pindir-d0-out-d1-in;
+
+ sn65hvs882: sn65hvs882@0 {
+ compatible = "pisosr-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ load-gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
+
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpol;
+ };
+};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&ecap0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins_default>;
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&gpio4 {
+ status = "okay";
+};
+
+&gpio5 {
+ status = "okay";
+};
+
+&mmc1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_sleep>;
+ vmmc-supply = <&v3_3d>;
+ bus-width = <4>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&qspi {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qspi_pins_default>;
+ pinctrl-1 = <&qspi_pins_sleep>;
+
+ spi-max-frequency = <48000000>;
+ flash@0 {
+ compatible = "mx66l51235l";
+ spi-max-frequency = <48000000>;
+ reg = <0>;
+ spi-cpol;
+ spi-cpha;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * MTD partition table. The ROM checks the first 512KiB for a
+ * valid file to boot(XIP).
+ */
+ partition@0 {
+ label = "QSPI.U_BOOT";
+ reg = <0x00000000 0x00080000>;
+ };
+ partition@1 {
+ label = "QSPI.U_BOOT.backup";
+ reg = <0x00080000 0x00080000>;
+ };
+ partition@2 {
+ label = "QSPI.U-BOOT-SPL_OS";
+ reg = <0x00100000 0x00010000>;
+ };
+ partition@3 {
+ label = "QSPI.U_BOOT_ENV";
+ reg = <0x00110000 0x00010000>;
+ };
+ partition@4 {
+ label = "QSPI.U-BOOT-ENV.backup";
+ reg = <0x00120000 0x00010000>;
+ };
+ partition@5 {
+ label = "QSPI.KERNEL";
+ reg = <0x00130000 0x0800000>;
+ };
+ partition@6 {
+ label = "QSPI.FILESYSTEM";
+ reg = <0x00930000 0x36D0000>;
+ };
+ };
+};
+
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-rxid";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
+ clock-names = "ext-clk", "int-clk";
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
+
+&cpu {
+ cpu0-supply = <&tps>;
+};
+
+&cpu0_opp_table {
+ /*
+ * Supply voltage supervisor on board will not allow opp50 so
+ * disable it and set opp100 as suspend OPP.
+ */
+ opp-50-300000000 {
+ /* opp50-300000000 */
+ status = "disabled";
+ };
+
+ opp-100-600000000 {
+ /* opp100-600000000 */
+ opp-suspend;
+ };
+};
+
+&pruss1_mdio {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/am437x-l4.dtsi b/src/arm/ti/omap/am437x-l4.dtsi
new file mode 100644
index 0000000..824b941
--- /dev/null
+++ b/src/arm/ti/omap/am437x-l4.dtsi
@@ -0,0 +1,2584 @@
+&l4_wkup { /* 0x44c00000 */
+ compatible = "ti,am4-l4-wkup", "simple-pm-bus";
+ power-domains = <&prm_wkup>;
+ clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_L4_WKUP_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x44c00000 0x800>,
+ <0x44c00800 0x800>,
+ <0x44c01000 0x400>,
+ <0x44c01400 0x400>;
+ reg-names = "ap", "la", "ia0", "ia1";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x44c00000 0x100000>, /* segment 0 */
+ <0x00100000 0x44d00000 0x100000>, /* segment 1 */
+ <0x00200000 0x44e00000 0x100000>; /* segment 2 */
+
+ segment@0 { /* 0x44c00000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00000800 0x00000800 0x000800>, /* ap 1 */
+ <0x00001000 0x00001000 0x000400>, /* ap 2 */
+ <0x00001400 0x00001400 0x000400>; /* ap 3 */
+ };
+
+ segment@100000 { /* 0x44d00000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00100000 0x004000>, /* ap 4 */
+ <0x00004000 0x00104000 0x001000>, /* ap 5 */
+ <0x00080000 0x00180000 0x002000>, /* ap 6 */
+ <0x00082000 0x00182000 0x001000>, /* ap 7 */
+ <0x000f0000 0x001f0000 0x010000>; /* ap 8 */
+
+ target-module@0 { /* 0x44d00000, ap 4 28.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x0 0x4>;
+ reg-names = "rev";
+ clocks = <&l4_wkup_aon_clkctrl AM4_L4_WKUP_AON_WKUP_M3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x4000>,
+ <0x00080000 0x00080000 0x2000>;
+
+ wkup_m3: cpu@0 {
+ compatible = "ti,am4372-wkup-m3";
+ reg = <0x00000000 0x4000>,
+ <0x00080000 0x2000>;
+ reg-names = "umem", "dmem";
+ resets = <&prm_wkup 3>;
+ reset-names = "rstctrl";
+ ti,pm-firmware = "am335x-pm-firmware.elf";
+ };
+ };
+
+ target-module@f0000 { /* 0x44df0000, ap 8 58.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xf0000 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf0000 0x10000>;
+
+ prcm: prcm@0 {
+ compatible = "ti,am4-prcm", "simple-bus";
+ reg = <0x0 0x11000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11000>;
+
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prcm_clockdomains: clockdomains {
+ };
+ };
+ };
+ };
+
+ segment@200000 { /* 0x44e00000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00200000 0x001000>, /* ap 9 */
+ <0x00003000 0x00203000 0x001000>, /* ap 10 */
+ <0x00004000 0x00204000 0x001000>, /* ap 11 */
+ <0x00005000 0x00205000 0x001000>, /* ap 12 */
+ <0x00006000 0x00206000 0x001000>, /* ap 13 */
+ <0x00007000 0x00207000 0x001000>, /* ap 14 */
+ <0x00008000 0x00208000 0x001000>, /* ap 15 */
+ <0x00009000 0x00209000 0x001000>, /* ap 16 */
+ <0x0000a000 0x0020a000 0x001000>, /* ap 17 */
+ <0x0000b000 0x0020b000 0x001000>, /* ap 18 */
+ <0x0000c000 0x0020c000 0x001000>, /* ap 19 */
+ <0x0000d000 0x0020d000 0x001000>, /* ap 20 */
+ <0x0000f000 0x0020f000 0x001000>, /* ap 21 */
+ <0x00010000 0x00210000 0x010000>, /* ap 22 */
+ <0x00030000 0x00230000 0x001000>, /* ap 23 */
+ <0x00031000 0x00231000 0x001000>, /* ap 24 */
+ <0x00032000 0x00232000 0x001000>, /* ap 25 */
+ <0x00033000 0x00233000 0x001000>, /* ap 26 */
+ <0x00034000 0x00234000 0x001000>, /* ap 27 */
+ <0x00035000 0x00235000 0x001000>, /* ap 28 */
+ <0x00036000 0x00236000 0x001000>, /* ap 29 */
+ <0x00037000 0x00237000 0x001000>, /* ap 30 */
+ <0x00038000 0x00238000 0x001000>, /* ap 31 */
+ <0x00039000 0x00239000 0x001000>, /* ap 32 */
+ <0x0003a000 0x0023a000 0x001000>, /* ap 33 */
+ <0x0003e000 0x0023e000 0x001000>, /* ap 34 */
+ <0x0003f000 0x0023f000 0x001000>, /* ap 35 */
+ <0x00040000 0x00240000 0x040000>, /* ap 36 */
+ <0x00080000 0x00280000 0x001000>, /* ap 37 */
+ <0x00088000 0x00288000 0x008000>, /* ap 38 */
+ <0x00092000 0x00292000 0x001000>, /* ap 39 */
+ <0x00086000 0x00286000 0x001000>, /* ap 40 */
+ <0x00087000 0x00287000 0x001000>, /* ap 41 */
+ <0x00090000 0x00290000 0x001000>, /* ap 42 */
+ <0x00091000 0x00291000 0x001000>; /* ap 43 */
+
+ target-module@3000 { /* 0x44e03000, ap 10 0a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3000 0x1000>;
+ };
+
+ target-module@5000 { /* 0x44e05000, ap 12 30.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5000 0x1000>;
+ };
+
+ target-module@7000 { /* 0x44e07000, ap 14 20.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x7000 0x4>,
+ <0x7010 0x4>,
+ <0x7114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_GPIO1_CLKCTRL 0>,
+ <&l4_wkup_clkctrl AM4_L4_WKUP_GPIO1_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7000 0x1000>;
+
+ gpio0: gpio@0 {
+ compatible = "ti,am4372-gpio","ti,omap4-gpio";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+ };
+
+ target-module@9000 { /* 0x44e09000, ap 16 04.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x9050 0x4>,
+ <0x9054 0x4>,
+ <0x9058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_UART1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x9000 0x1000>;
+
+ uart0: serial@0 {
+ compatible = "ti,am4372-uart";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@b000 { /* 0x44e0b000, ap 18 48.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xb000 0x8>,
+ <0xb010 0x8>,
+ <0xb090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_I2C1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb000 0x1000>;
+
+ i2c0: i2c@0 {
+ compatible = "ti,am4372-i2c","ti,omap4-i2c";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ target-module@d000 { /* 0x44e0d000, ap 20 38.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xd000 0x4>,
+ <0xd010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): wkup_pwrdm, l3s_tsc_clkdm */
+ clocks = <&l3s_tsc_clkctrl AM4_L3S_TSC_ADC_TSC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd000 0x1000>;
+
+ tscadc: tscadc@0 {
+ compatible = "ti,am3359-tscadc";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&adc_tsc_fck>;
+ clock-names = "fck";
+ status = "disabled";
+ dmas = <&edma 53 0>, <&edma 57 0>;
+ dma-names = "fifo0", "fifo1";
+
+ tsc {
+ compatible = "ti,am3359-tsc";
+ };
+
+ adc {
+ #io-channel-cells = <1>;
+ compatible = "ti,am3359-adc";
+ };
+
+ };
+ };
+
+ target-module@10000 { /* 0x44e10000, ap 22 0c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x10000 0x4>;
+ reg-names = "rev";
+ clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_CONTROL_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000 0x10000>;
+
+ scm: scm@0 {
+ compatible = "ti,am4-scm", "simple-bus";
+ reg = <0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x4000>;
+
+ am43xx_pinmux: pinmux@800 {
+ compatible = "ti,am437-padconf",
+ "pinctrl-single";
+ reg = <0x800 0x31c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon", "simple-bus";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ phy_gmii_sel: phy-gmii-sel {
+ compatible = "ti,am43xx-phy-gmii-sel";
+ reg = <0x650 0x4>;
+ #phy-cells = <2>;
+ };
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ wkup_m3_ipc: wkup_m3_ipc@1324 {
+ compatible = "ti,am4372-wkup-m3-ipc";
+ reg = <0x1324 0x44>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ ti,rproc = <&wkup_m3>;
+ mboxes = <&mailbox &mbox_wkupm3>;
+ };
+
+ edma_xbar: dma-router@f90 {
+ compatible = "ti,am335x-edma-crossbar";
+ reg = <0xf90 0x40>;
+ #dma-cells = <3>;
+ dma-requests = <64>;
+ dma-masters = <&edma>;
+ };
+
+ scm_clockdomains: clockdomains {
+ };
+ };
+ };
+
+ timer1_target: target-module@31000 { /* 0x44e31000, ap 24 40.0 */
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x31000 0x4>,
+ <0x31010 0x4>,
+ <0x31014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_TIMER1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x31000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-alwon;
+ clocks = <&timer1_fck>;
+ clock-names = "fck";
+ };
+ };
+
+ target-module@33000 { /* 0x44e33000, ap 26 18.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x33000 0x1000>;
+ };
+
+ target-module@35000 { /* 0x44e35000, ap 28 50.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x35000 0x4>,
+ <0x35010 0x4>,
+ <0x35014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_WD_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x35000 0x1000>;
+
+ wdt: wdt@0 {
+ compatible = "ti,am4372-wdt","ti,omap3-wdt";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@37000 { /* 0x44e37000, ap 30 08.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x37000 0x1000>;
+ };
+
+ target-module@39000 { /* 0x44e39000, ap 32 02.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x39000 0x1000>;
+ };
+
+ rtc_target: target-module@3e000 { /* 0x44e3e000, ap 34 60.0 */
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x3e074 0x4>,
+ <0x3e078 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */
+ power-domains = <&prm_rtc>;
+ clocks = <&l4_rtc_clkctrl AM4_L4_RTC_RTC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3e000 0x1000>;
+
+ rtc: rtc@0 {
+ compatible = "ti,am4372-rtc", "ti,am3352-rtc",
+ "ti,da830-rtc";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_32768_ck>;
+ clock-names = "int-clk";
+ system-power-controller;
+ status = "disabled";
+ };
+ };
+
+ target-module@40000 { /* 0x44e40000, ap 36 68.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x40000 0x40000>;
+ };
+
+ target-module@86000 { /* 0x44e86000, ap 40 70.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x86000 0x4>,
+ <0x86004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ /* Domains (P, C): wkup_pwrdm, l4_wkup_aon_clkdm */
+ clocks = <&l4_wkup_aon_clkctrl AM4_L4_WKUP_AON_COUNTER_32K_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x86000 0x1000>;
+
+ counter32k: counter@0 {
+ compatible = "ti,am4372-counter32k","ti,omap-counter32k";
+ reg = <0x0 0x40>;
+ };
+ };
+
+ target-module@88000 { /* 0x44e88000, ap 38 12.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00088000 0x00008000>,
+ <0x00008000 0x00090000 0x00001000>,
+ <0x00009000 0x00091000 0x00001000>;
+ };
+ };
+};
+
+&l4_fast { /* 0x4a000000 */
+ compatible = "ti,am4-l4-fast", "simple-pm-bus";
+ power-domains = <&prm_per>;
+ clocks = <&l3_clkctrl AM4_L3_L4_HS_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x4a000000 0x800>,
+ <0x4a000800 0x800>,
+ <0x4a001000 0x400>;
+ reg-names = "ap", "la", "ia0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4a000000 0x1000000>; /* segment 0 */
+
+ segment@0 { /* 0x4a000000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00000800 0x00000800 0x000800>, /* ap 1 */
+ <0x00001000 0x00001000 0x000400>, /* ap 2 */
+ <0x00100000 0x00100000 0x008000>, /* ap 3 */
+ <0x00108000 0x00108000 0x001000>, /* ap 4 */
+ <0x00400000 0x00400000 0x002000>, /* ap 5 */
+ <0x00402000 0x00402000 0x001000>, /* ap 6 */
+ <0x00200000 0x00200000 0x080000>, /* ap 7 */
+ <0x00280000 0x00280000 0x001000>; /* ap 8 */
+
+ target-module@100000 { /* 0x4a100000, ap 3 04.0 */
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x101200 0x4>,
+ <0x101208 0x4>,
+ <0x101204 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <0>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ ti,syss-mask = <1>;
+ clocks = <&cpsw_125mhz_clkctrl AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x100000 0x8000>;
+
+ mac_sw: switch@0 {
+ compatible = "ti,am4372-cpsw-switch", "ti,cpsw-switch";
+ reg = <0x0 0x4000>;
+ ranges = <0 0 0x4000>;
+ clocks = <&cpsw_125mhz_gclk>, <&dpll_clksel_mac_clk>;
+ clock-names = "fck", "50mclk";
+ assigned-clocks = <&dpll_clksel_mac_clk>;
+ assigned-clock-rates = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ syscon = <&scm_conf>;
+ status = "disabled";
+
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpsw_port1: port@1 {
+ reg = <1>;
+ label = "port1";
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1 0>;
+ };
+
+ cpsw_port2: port@2 {
+ reg = <2>;
+ label = "port2";
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2 0>;
+ };
+ };
+
+ davinci_mdio_sw: mdio@1000 {
+ compatible = "ti,am4372-mdio", "ti,cpsw-mdio","ti,davinci_mdio";
+ clocks = <&cpsw_125mhz_gclk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus_freq = <1000000>;
+ reg = <0x1000 0x100>;
+ };
+
+ cpts {
+ clocks = <&cpsw_cpts_rft_clk>;
+ clock-names = "cpts";
+ };
+ };
+ };
+
+ target-module@200000 { /* 0x4a200000, ap 7 02.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x200000 0x80000>;
+ };
+
+ target-module@400000 { /* 0x4a400000, ap 5 08.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x400000 0x2000>;
+ };
+ };
+};
+
+&l4_per { /* 0x48000000 */
+ compatible = "ti,am4-l4-per", "simple-pm-bus";
+ power-domains = <&prm_per>;
+ clocks = <&l4ls_clkctrl AM4_L4LS_L4_LS_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x48000000 0x800>,
+ <0x48000800 0x800>,
+ <0x48001000 0x400>,
+ <0x48001400 0x400>,
+ <0x48001800 0x400>,
+ <0x48001c00 0x400>;
+ reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x48000000 0x100000>, /* segment 0 */
+ <0x00100000 0x48100000 0x100000>, /* segment 1 */
+ <0x00200000 0x48200000 0x100000>, /* segment 2 */
+ <0x00300000 0x48300000 0x100000>, /* segment 3 */
+ <0x46000000 0x46000000 0x400000>, /* l3 data port */
+ <0x46400000 0x46400000 0x400000>; /* l3 data port */
+
+ segment@0 { /* 0x48000000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00000800 0x00000800 0x000800>, /* ap 1 */
+ <0x00001000 0x00001000 0x000400>, /* ap 2 */
+ <0x00001400 0x00001400 0x000400>, /* ap 3 */
+ <0x00001800 0x00001800 0x000400>, /* ap 4 */
+ <0x00001c00 0x00001c00 0x000400>, /* ap 5 */
+ <0x00008000 0x00008000 0x001000>, /* ap 6 */
+ <0x00009000 0x00009000 0x001000>, /* ap 7 */
+ <0x00022000 0x00022000 0x001000>, /* ap 8 */
+ <0x00023000 0x00023000 0x001000>, /* ap 9 */
+ <0x00024000 0x00024000 0x001000>, /* ap 10 */
+ <0x00025000 0x00025000 0x001000>, /* ap 11 */
+ <0x0002a000 0x0002a000 0x001000>, /* ap 12 */
+ <0x0002b000 0x0002b000 0x001000>, /* ap 13 */
+ <0x00038000 0x00038000 0x002000>, /* ap 14 */
+ <0x0003a000 0x0003a000 0x001000>, /* ap 15 */
+ <0x0003c000 0x0003c000 0x002000>, /* ap 16 */
+ <0x0003e000 0x0003e000 0x001000>, /* ap 17 */
+ <0x00040000 0x00040000 0x001000>, /* ap 18 */
+ <0x00041000 0x00041000 0x001000>, /* ap 19 */
+ <0x00042000 0x00042000 0x001000>, /* ap 20 */
+ <0x00043000 0x00043000 0x001000>, /* ap 21 */
+ <0x00044000 0x00044000 0x001000>, /* ap 22 */
+ <0x00045000 0x00045000 0x001000>, /* ap 23 */
+ <0x00046000 0x00046000 0x001000>, /* ap 24 */
+ <0x00047000 0x00047000 0x001000>, /* ap 25 */
+ <0x00048000 0x00048000 0x001000>, /* ap 26 */
+ <0x00049000 0x00049000 0x001000>, /* ap 27 */
+ <0x0004c000 0x0004c000 0x001000>, /* ap 28 */
+ <0x0004d000 0x0004d000 0x001000>, /* ap 29 */
+ <0x00060000 0x00060000 0x001000>, /* ap 30 */
+ <0x00061000 0x00061000 0x001000>, /* ap 31 */
+ <0x00080000 0x00080000 0x010000>, /* ap 32 */
+ <0x00090000 0x00090000 0x001000>, /* ap 33 */
+ <0x00030000 0x00030000 0x001000>, /* ap 65 */
+ <0x00031000 0x00031000 0x001000>, /* ap 66 */
+ <0x0004a000 0x0004a000 0x001000>, /* ap 71 */
+ <0x0004b000 0x0004b000 0x001000>, /* ap 72 */
+ <0x000c8000 0x000c8000 0x001000>, /* ap 73 */
+ <0x000c9000 0x000c9000 0x001000>, /* ap 74 */
+ <0x000ca000 0x000ca000 0x001000>, /* ap 77 */
+ <0x000cb000 0x000cb000 0x001000>, /* ap 78 */
+ <0x00034000 0x00034000 0x001000>, /* ap 80 */
+ <0x00035000 0x00035000 0x001000>, /* ap 81 */
+ <0x00036000 0x00036000 0x001000>, /* ap 84 */
+ <0x00037000 0x00037000 0x001000>, /* ap 85 */
+ <0x46000000 0x46000000 0x400000>, /* l3 data port */
+ <0x46400000 0x46400000 0x400000>; /* l3 data port */
+
+ target-module@8000 { /* 0x48008000, ap 6 10.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8000 0x1000>;
+ };
+
+ target-module@22000 { /* 0x48022000, ap 8 0a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x22050 0x4>,
+ <0x22054 0x4>,
+ <0x22058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_UART2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x22000 0x1000>;
+
+ uart1: serial@0 {
+ compatible = "ti,am4372-uart";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@24000 { /* 0x48024000, ap 10 1c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x24050 0x4>,
+ <0x24054 0x4>,
+ <0x24058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_UART3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x24000 0x1000>;
+
+ uart2: serial@0 {
+ compatible = "ti,am4372-uart";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@2a000 { /* 0x4802a000, ap 12 22.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x2a000 0x8>,
+ <0x2a010 0x8>,
+ <0x2a090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_I2C2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2a000 0x1000>;
+
+ i2c1: i2c@0 {
+ compatible = "ti,am4372-i2c","ti,omap4-i2c";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ target-module@30000 { /* 0x48030000, ap 65 08.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x30000 0x4>,
+ <0x30110 0x4>,
+ <0x30114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_SPI0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x30000 0x1000>;
+
+ spi0: spi@0 {
+ compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ target-module@34000 { /* 0x48034000, ap 80 56.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x34000 0x1000>;
+ };
+
+ target-module@36000 { /* 0x48036000, ap 84 3e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x36000 0x1000>;
+ };
+
+ target-module@38000 { /* 0x48038000, ap 14 04.0 */
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x38000 0x4>,
+ <0x38004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): per_pwrdm, l3s_clkdm */
+ clocks = <&l3s_clkctrl AM4_L3S_MCASP0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x38000 0x2000>,
+ <0x46000000 0x46000000 0x400000>;
+
+ mcasp0: mcasp@0 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x2000>,
+ <0x46000000 0x400000>;
+ reg-names = "mpu", "dat";
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ status = "disabled";
+ dmas = <&edma 8 2>,
+ <&edma 9 2>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@3c000 { /* 0x4803c000, ap 16 2a.0 */
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x3c000 0x4>,
+ <0x3c004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): per_pwrdm, l3s_clkdm */
+ clocks = <&l3s_clkctrl AM4_L3S_MCASP1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3c000 0x2000>,
+ <0x46400000 0x46400000 0x400000>;
+
+ mcasp1: mcasp@0 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x2000>,
+ <0x46400000 0x400000>;
+ reg-names = "mpu", "dat";
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ status = "disabled";
+ dmas = <&edma 10 2>,
+ <&edma 11 2>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ timer2_target: target-module@40000 { /* 0x48040000, ap 18 1e.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x40000 0x4>,
+ <0x40010 0x4>,
+ <0x40014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x40000 0x1000>;
+
+ timer2: timer@0 {
+ compatible = "ti,am4372-timer","ti,am335x-timer";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&timer2_fck>;
+ clock-names = "fck";
+ };
+ };
+
+ target-module@42000 { /* 0x48042000, ap 20 24.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x42000 0x4>,
+ <0x42010 0x4>,
+ <0x42014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_TIMER3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x42000 0x1000>;
+
+ timer3: timer@0 {
+ compatible = "ti,am4372-timer","ti,am335x-timer";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@44000 { /* 0x48044000, ap 22 26.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x44000 0x4>,
+ <0x44010 0x4>,
+ <0x44014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_TIMER4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x44000 0x1000>;
+
+ timer4: timer@0 {
+ compatible = "ti,am4372-timer","ti,am335x-timer";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ status = "disabled";
+ };
+ };
+
+ target-module@46000 { /* 0x48046000, ap 24 28.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x46000 0x4>,
+ <0x46010 0x4>,
+ <0x46014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_TIMER5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x46000 0x1000>;
+
+ timer5: timer@0 {
+ compatible = "ti,am4372-timer","ti,am335x-timer";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ status = "disabled";
+ };
+ };
+
+ target-module@48000 { /* 0x48048000, ap 26 1a.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x48000 0x4>,
+ <0x48010 0x4>,
+ <0x48014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_TIMER6_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x48000 0x1000>;
+
+ timer6: timer@0 {
+ compatible = "ti,am4372-timer","ti,am335x-timer";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ status = "disabled";
+ };
+ };
+
+ target-module@4a000 { /* 0x4804a000, ap 71 48.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x4a000 0x4>,
+ <0x4a010 0x4>,
+ <0x4a014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_TIMER7_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4a000 0x1000>;
+
+ timer7: timer@0 {
+ compatible = "ti,am4372-timer","ti,am335x-timer";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ status = "disabled";
+ };
+ };
+
+ target-module@4c000 { /* 0x4804c000, ap 28 36.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4c000 0x4>,
+ <0x4c010 0x4>,
+ <0x4c114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_GPIO2_CLKCTRL 0>,
+ <&l4ls_clkctrl AM4_L4LS_GPIO2_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4c000 0x1000>;
+
+ gpio1: gpio@0 {
+ compatible = "ti,am4372-gpio","ti,omap4-gpio";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+ };
+
+ target-module@60000 { /* 0x48060000, ap 30 14.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x602fc 0x4>,
+ <0x60110 0x4>,
+ <0x60114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_MMC1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x60000 0x1000>;
+
+ mmc1: mmc@0 {
+ compatible = "ti,am437-sdhci";
+ reg = <0x0 0x1000>;
+ ti,needs-special-reset;
+ dmas = <&edma 24 0>,
+ <&edma 25 0>;
+ dma-names = "tx", "rx";
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@80000 { /* 0x48080000, ap 32 18.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x80000 0x4>,
+ <0x80010 0x4>,
+ <0x80014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_ELM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000 0x10000>;
+
+ elm: elm@0 {
+ compatible = "ti,am3352-elm";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ target-module@c8000 { /* 0x480c8000, ap 73 06.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xc8000 0x4>,
+ <0xc8010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_MAILBOX_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc8000 0x1000>;
+
+ mailbox: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <8>;
+ mbox_wkupm3: mbox-wkup-m3 {
+ ti,mbox-send-noirq;
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <0 0 3>;
+ };
+ };
+ };
+
+ target-module@ca000 { /* 0x480ca000, ap 77 38.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xca000 0x4>,
+ <0xca010 0x4>,
+ <0xca014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_SPINLOCK_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xca000 0x1000>;
+
+ hwspinlock: spinlock@0 {
+ compatible = "ti,omap4-hwspinlock";
+ reg = <0x0 0x1000>;
+ #hwlock-cells = <1>;
+ };
+ };
+ };
+
+ segment@100000 { /* 0x48100000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0008c000 0x0018c000 0x001000>, /* ap 34 */
+ <0x0008d000 0x0018d000 0x001000>, /* ap 35 */
+ <0x0008e000 0x0018e000 0x001000>, /* ap 36 */
+ <0x0008f000 0x0018f000 0x001000>, /* ap 37 */
+ <0x0009c000 0x0019c000 0x001000>, /* ap 38 */
+ <0x0009d000 0x0019d000 0x001000>, /* ap 39 */
+ <0x000a6000 0x001a6000 0x001000>, /* ap 40 */
+ <0x000a7000 0x001a7000 0x001000>, /* ap 41 */
+ <0x000a8000 0x001a8000 0x001000>, /* ap 42 */
+ <0x000a9000 0x001a9000 0x001000>, /* ap 43 */
+ <0x000aa000 0x001aa000 0x001000>, /* ap 44 */
+ <0x000ab000 0x001ab000 0x001000>, /* ap 45 */
+ <0x000ac000 0x001ac000 0x001000>, /* ap 46 */
+ <0x000ad000 0x001ad000 0x001000>, /* ap 47 */
+ <0x000ae000 0x001ae000 0x001000>, /* ap 48 */
+ <0x000af000 0x001af000 0x001000>, /* ap 49 */
+ <0x000cc000 0x001cc000 0x002000>, /* ap 50 */
+ <0x000ce000 0x001ce000 0x002000>, /* ap 51 */
+ <0x000d0000 0x001d0000 0x002000>, /* ap 52 */
+ <0x000d2000 0x001d2000 0x002000>, /* ap 53 */
+ <0x000d8000 0x001d8000 0x001000>, /* ap 54 */
+ <0x000d9000 0x001d9000 0x001000>, /* ap 55 */
+ <0x000a0000 0x001a0000 0x001000>, /* ap 67 */
+ <0x000a1000 0x001a1000 0x001000>, /* ap 68 */
+ <0x000a2000 0x001a2000 0x001000>, /* ap 69 */
+ <0x000a3000 0x001a3000 0x001000>, /* ap 70 */
+ <0x000a4000 0x001a4000 0x001000>, /* ap 92 */
+ <0x000a5000 0x001a5000 0x001000>, /* ap 93 */
+ <0x000c1000 0x001c1000 0x001000>, /* ap 94 */
+ <0x000c2000 0x001c2000 0x001000>; /* ap 95 */
+
+ target-module@8c000 { /* 0x4818c000, ap 34 0c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8c000 0x1000>;
+ };
+
+ target-module@8e000 { /* 0x4818e000, ap 36 02.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8e000 0x1000>;
+ };
+
+ target-module@9c000 { /* 0x4819c000, ap 38 52.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x9c000 0x8>,
+ <0x9c010 0x8>,
+ <0x9c090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_I2C3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x9c000 0x1000>;
+
+ i2c2: i2c@0 {
+ compatible = "ti,am4372-i2c","ti,omap4-i2c";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ target-module@a0000 { /* 0x481a0000, ap 67 2c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xa0000 0x4>,
+ <0xa0110 0x4>,
+ <0xa0114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_SPI1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa0000 0x1000>;
+
+ spi1: spi@0 {
+ compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ target-module@a2000 { /* 0x481a2000, ap 69 2e.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xa2000 0x4>,
+ <0xa2110 0x4>,
+ <0xa2114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_SPI2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa2000 0x1000>;
+
+ spi2: spi@0 {
+ compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ target-module@a4000 { /* 0x481a4000, ap 92 62.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xa4000 0x4>,
+ <0xa4110 0x4>,
+ <0xa4114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_SPI3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa4000 0x1000>;
+
+ spi3: spi@0 {
+ compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ target-module@a6000 { /* 0x481a6000, ap 40 16.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xa6050 0x4>,
+ <0xa6054 0x4>,
+ <0xa6058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_UART4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa6000 0x1000>;
+
+ uart3: serial@0 {
+ compatible = "ti,am4372-uart";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@a8000 { /* 0x481a8000, ap 42 20.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xa8050 0x4>,
+ <0xa8054 0x4>,
+ <0xa8058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_UART5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa8000 0x1000>;
+
+ uart4: serial@0 {
+ compatible = "ti,am4372-uart";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@aa000 { /* 0x481aa000, ap 44 12.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xaa050 0x4>,
+ <0xaa054 0x4>,
+ <0xaa058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_UART6_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xaa000 0x1000>;
+
+ uart5: serial@0 {
+ compatible = "ti,am4372-uart";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@ac000 { /* 0x481ac000, ap 46 30.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xac000 0x4>,
+ <0xac010 0x4>,
+ <0xac114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_GPIO3_CLKCTRL 0>,
+ <&l4ls_clkctrl AM4_L4LS_GPIO3_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xac000 0x1000>;
+
+ gpio2: gpio@0 {
+ compatible = "ti,am4372-gpio","ti,omap4-gpio";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+ };
+
+ target-module@ae000 { /* 0x481ae000, ap 48 32.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xae000 0x4>,
+ <0xae010 0x4>,
+ <0xae114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_GPIO4_CLKCTRL 0>,
+ <&l4ls_clkctrl AM4_L4LS_GPIO4_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xae000 0x1000>;
+
+ gpio3: gpio@0 {
+ compatible = "ti,am4372-gpio","ti,omap4-gpio";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+ };
+
+ target-module@c1000 { /* 0x481c1000, ap 94 68.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0xc1000 0x4>,
+ <0xc1010 0x4>,
+ <0xc1014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_TIMER8_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc1000 0x1000>;
+
+ timer8: timer@0 {
+ compatible = "ti,am4372-timer","ti,am335x-timer";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@cc000 { /* 0x481cc000, ap 50 46.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xcc020 0x4>;
+ reg-names = "rev";
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>,
+ <&dcan0_fck>;
+ clock-names = "fck", "osc";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xcc000 0x2000>;
+
+ dcan0: can@0 {
+ compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+ reg = <0x0 0x2000>;
+ clocks = <&dcan0_fck>;
+ clock-names = "fck";
+ syscon-raminit = <&scm_conf 0x644 0>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@d0000 { /* 0x481d0000, ap 52 3a.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xd0020 0x4>;
+ reg-names = "rev";
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>,
+ <&dcan1_fck>;
+ clock-names = "fck", "osc";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd0000 0x2000>;
+
+ dcan1: can@0 {
+ compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+ reg = <0x0 0x2000>;
+ clocks = <&dcan1_fck>;
+ clock-names = "fck";
+ syscon-raminit = <&scm_conf 0x644 1>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@d8000 { /* 0x481d8000, ap 54 5e.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xd82fc 0x4>,
+ <0xd8110 0x4>,
+ <0xd8114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_MMC2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd8000 0x1000>;
+
+ mmc2: mmc@0 {
+ compatible = "ti,am437-sdhci";
+ reg = <0x0 0x1000>;
+ ti,needs-special-reset;
+ dmas = <&edma 2 0>,
+ <&edma 3 0>;
+ dma-names = "tx", "rx";
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+ };
+
+ segment@200000 { /* 0x48200000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00200000 0x010000>;
+
+ target-module@0 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ power-domains = <&prm_mpu>;
+ clocks = <&mpu_clkctrl AM4_MPU_MPU_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x10000>;
+
+ mpu@0 {
+ compatible = "ti,omap4-mpu";
+ pm-sram = <&pm_sram_code
+ &pm_sram_data>;
+ };
+ };
+ };
+
+ segment@300000 { /* 0x48300000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00300000 0x001000>, /* ap 56 */
+ <0x00001000 0x00301000 0x001000>, /* ap 57 */
+ <0x00002000 0x00302000 0x001000>, /* ap 58 */
+ <0x00003000 0x00303000 0x001000>, /* ap 59 */
+ <0x00004000 0x00304000 0x001000>, /* ap 60 */
+ <0x00005000 0x00305000 0x001000>, /* ap 61 */
+ <0x00018000 0x00318000 0x004000>, /* ap 62 */
+ <0x0001c000 0x0031c000 0x001000>, /* ap 63 */
+ <0x00010000 0x00310000 0x002000>, /* ap 64 */
+ <0x00028000 0x00328000 0x001000>, /* ap 75 */
+ <0x00029000 0x00329000 0x001000>, /* ap 76 */
+ <0x00012000 0x00312000 0x001000>, /* ap 79 */
+ <0x00020000 0x00320000 0x001000>, /* ap 82 */
+ <0x00021000 0x00321000 0x001000>, /* ap 83 */
+ <0x00026000 0x00326000 0x001000>, /* ap 86 */
+ <0x00027000 0x00327000 0x001000>, /* ap 87 */
+ <0x0002a000 0x0032a000 0x000400>, /* ap 88 */
+ <0x0002c000 0x0032c000 0x001000>, /* ap 89 */
+ <0x00013000 0x00313000 0x001000>, /* ap 90 */
+ <0x00014000 0x00314000 0x001000>, /* ap 91 */
+ <0x00006000 0x00306000 0x001000>, /* ap 96 */
+ <0x00007000 0x00307000 0x001000>, /* ap 97 */
+ <0x00008000 0x00308000 0x001000>, /* ap 98 */
+ <0x00009000 0x00309000 0x001000>, /* ap 99 */
+ <0x0000a000 0x0030a000 0x001000>, /* ap 100 */
+ <0x0000b000 0x0030b000 0x001000>, /* ap 101 */
+ <0x0003d000 0x0033d000 0x001000>, /* ap 102 */
+ <0x0003e000 0x0033e000 0x001000>, /* ap 103 */
+ <0x0003f000 0x0033f000 0x001000>, /* ap 104 */
+ <0x00040000 0x00340000 0x001000>, /* ap 105 */
+ <0x00041000 0x00341000 0x001000>, /* ap 106 */
+ <0x00042000 0x00342000 0x001000>, /* ap 107 */
+ <0x00045000 0x00345000 0x001000>, /* ap 108 */
+ <0x00046000 0x00346000 0x001000>, /* ap 109 */
+ <0x00047000 0x00347000 0x001000>, /* ap 110 */
+ <0x00048000 0x00348000 0x001000>, /* ap 111 */
+ <0x000f2000 0x003f2000 0x002000>, /* ap 112 */
+ <0x000f4000 0x003f4000 0x001000>, /* ap 113 */
+ <0x0004c000 0x0034c000 0x002000>, /* ap 114 */
+ <0x0004e000 0x0034e000 0x001000>, /* ap 115 */
+ <0x00022000 0x00322000 0x001000>, /* ap 116 */
+ <0x00023000 0x00323000 0x001000>, /* ap 117 */
+ <0x000f0000 0x003f0000 0x001000>, /* ap 118 */
+ <0x0002a400 0x0032a400 0x000400>, /* ap 119 */
+ <0x0002a800 0x0032a800 0x000400>, /* ap 120 */
+ <0x0002ac00 0x0032ac00 0x000400>, /* ap 121 */
+ <0x0002b000 0x0032b000 0x001000>, /* ap 122 */
+ <0x00080000 0x00380000 0x020000>, /* ap 123 */
+ <0x000a0000 0x003a0000 0x001000>, /* ap 124 */
+ <0x000a8000 0x003a8000 0x008000>, /* ap 125 */
+ <0x000b0000 0x003b0000 0x001000>, /* ap 126 */
+ <0x000c0000 0x003c0000 0x020000>, /* ap 127 */
+ <0x000e0000 0x003e0000 0x001000>, /* ap 128 */
+ <0x000e8000 0x003e8000 0x008000>; /* ap 129 */
+
+ target-module@0 { /* 0x48300000, ap 56 40.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x0 0x4>,
+ <0x4 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+
+ epwmss0: epwmss@0 {
+ compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+ reg = <0x0 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000>;
+ status = "disabled";
+
+ ecap0: pwm@100 {
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ ehrpwm0: pwm@200 {
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x200 0x80>;
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+ };
+ };
+
+ target-module@2000 { /* 0x48302000, ap 58 4a.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x2000 0x4>,
+ <0x2004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2000 0x1000>;
+
+ epwmss1: epwmss@0 {
+ compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+ reg = <0x0 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000>;
+ status = "disabled";
+
+ ecap1: pwm@100 {
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ ehrpwm1: pwm@200 {
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x200 0x80>;
+ clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+ };
+ };
+
+ target-module@4000 { /* 0x48304000, ap 60 44.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x4000 0x4>,
+ <0x4004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+
+ epwmss2: epwmss@0 {
+ compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+ reg = <0x0 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000>;
+ status = "disabled";
+
+ ecap2: pwm@100 {
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ ehrpwm2: pwm@200 {
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x200 0x80>;
+ clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+ };
+ };
+
+ target-module@6000 { /* 0x48306000, ap 96 58.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x6000 0x4>,
+ <0x6004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6000 0x1000>;
+
+ epwmss3: epwmss@0 {
+ compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+ reg = <0x0 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000>;
+ status = "disabled";
+
+ ehrpwm3: pwm@200 {
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x200 0x80>;
+ clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+ };
+ };
+
+ target-module@8000 { /* 0x48308000, ap 98 54.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x8000 0x4>,
+ <0x8004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8000 0x1000>;
+
+ epwmss4: epwmss@0 {
+ compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+ reg = <0x0 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000>;
+ status = "disabled";
+
+ ehrpwm4: pwm@48308200 {
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x200 0x80>;
+ clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+ };
+ };
+
+ target-module@a000 { /* 0x4830a000, ap 100 60.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xa000 0x4>,
+ <0xa004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa000 0x1000>;
+
+ epwmss5: epwmss@0 {
+ compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+ reg = <0x0 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000>;
+ status = "disabled";
+
+ ehrpwm5: pwm@200 {
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x200 0x80>;
+ clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+ };
+ };
+
+ target-module@10000 { /* 0x48310000, ap 64 4e.1 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x11fe0 0x4>,
+ <0x11fe4 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_RNG_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000 0x2000>;
+
+ rng: rng@0 {
+ compatible = "ti,omap4-rng";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@13000 { /* 0x48313000, ap 90 50.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x13000 0x1000>;
+ };
+
+ target-module@18000 { /* 0x48318000, ap 62 4c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x18000 0x4000>;
+ };
+
+ target-module@20000 { /* 0x48320000, ap 82 34.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x20000 0x4>,
+ <0x20010 0x4>,
+ <0x20114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_GPIO5_CLKCTRL 0>,
+ <&l4ls_clkctrl AM4_L4LS_GPIO5_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x20000 0x1000>;
+
+ gpio4: gpio@0 {
+ compatible = "ti,am4372-gpio","ti,omap4-gpio";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+ };
+
+ gpio5_target: target-module@22000 { /* 0x48322000, ap 116 64.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x22000 0x4>,
+ <0x22010 0x4>,
+ <0x22114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_GPIO6_CLKCTRL 0>,
+ <&l4ls_clkctrl AM4_L4LS_GPIO6_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x22000 0x1000>;
+
+ gpio5: gpio@0 {
+ compatible = "ti,am4372-gpio","ti,omap4-gpio";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+ };
+
+ target-module@26000 { /* 0x48326000, ap 86 66.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x26000 0x4>,
+ <0x26104 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): per_pwrdm, l3s_clkdm */
+ clocks = <&l3s_clkctrl AM4_L3S_VPFE0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x1000>;
+
+ vpfe0: vpfe@0 {
+ compatible = "ti,am437x-vpfe";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@28000 { /* 0x48328000, ap 75 0e.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x28000 0x4>,
+ <0x28104 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): per_pwrdm, l3s_clkdm */
+ clocks = <&l3s_clkctrl AM4_L3S_VPFE1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x28000 0x1000>;
+
+ vpfe1: vpfe@0 {
+ compatible = "ti,am437x-vpfe";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@2a000 { /* 0x4832a000, ap 88 3c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x2a000 0x4>,
+ <0x2a010 0x4>,
+ <0x2a014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, dss_clkdm */
+ clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x0002a000 0x00000400>,
+ <0x00000400 0x0002a400 0x00000400>,
+ <0x00000800 0x0002a800 0x00000400>,
+ <0x00000c00 0x0002ac00 0x00000400>,
+ <0x00001000 0x0002b000 0x00001000>;
+
+ dss: dss@0 {
+ compatible = "ti,omap3-dss";
+ reg = <0 0x200>;
+ status = "disabled";
+ clocks = <&disp_clk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x00000400>,
+ <0x00000400 0x00000400 0x00000400>,
+ <0x00000800 0x00000800 0x00000400>,
+ <0x00000c00 0x00000c00 0x00000400>,
+ <0x00001000 0x00001000 0x00001000>;
+
+ target-module@400 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x400 0x4>,
+ <0x410 0x4>,
+ <0x414 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x400 0x400>;
+
+ dispc: dispc@0 {
+ compatible = "ti,omap3-dispc";
+ reg = <0 0x400>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&disp_clk>;
+ clock-names = "fck";
+
+ max-memory-bandwidth = <230000000>;
+ };
+ };
+
+ target-module@800 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x800 0x4>,
+ <0x810 0x4>,
+ <0x814 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x800 0x400>;
+
+ rfbi: rfbi@0 {
+ compatible = "ti,omap3-rfbi";
+ reg = <0 0x100>;
+ clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+ };
+ };
+
+ target-module@3d000 { /* 0x4833d000, ap 102 6e.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x3d000 0x4>,
+ <0x3d010 0x4>,
+ <0x3d014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_TIMER9_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3d000 0x1000>;
+
+ timer9: timer@0 {
+ compatible = "ti,am4372-timer","ti,am335x-timer";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@3f000 { /* 0x4833f000, ap 104 5c.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x3f000 0x4>,
+ <0x3f010 0x4>,
+ <0x3f014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_TIMER10_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3f000 0x1000>;
+
+ timer10: timer@0 {
+ compatible = "ti,am4372-timer","ti,am335x-timer";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@41000 { /* 0x48341000, ap 106 76.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x41000 0x4>,
+ <0x41010 0x4>,
+ <0x41014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_TIMER11_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x41000 0x1000>;
+
+ timer11: timer@0 {
+ compatible = "ti,am4372-timer","ti,am335x-timer";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@45000 { /* 0x48345000, ap 108 6a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x45000 0x4>,
+ <0x45110 0x4>,
+ <0x45114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_SPI4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x45000 0x1000>;
+
+ spi4: spi@0 {
+ compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ target-module@47000 { /* 0x48347000, ap 110 70.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x47000 0x4>,
+ <0x47014 0x4>,
+ <0x47018 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_HDQ1W_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x47000 0x1000>;
+
+ hdq: hdq@0 {
+ compatible = "ti,am4372-hdq";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&func_12m_clk>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ target-module@4c000 { /* 0x4834c000, ap 114 72.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x4c000 0x4>,
+ <0x4c010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&l3s_clkctrl AM4_L3S_ADC1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4c000 0x2000>;
+
+ magadc: magadc@0 {
+ compatible = "ti,am4372-magadc";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&adc_mag_fck>;
+ clock-names = "fck";
+ dmas = <&edma 54 0>, <&edma 55 0>;
+ dma-names = "fifo0", "fifo1";
+ status = "disabled";
+
+ mag {
+ compatible = "ti,am4372-mag";
+ };
+
+ adc {
+ #io-channel-cells = <1>;
+ compatible = "ti,am4372-adc";
+ };
+ };
+ };
+
+ target-module@80000 { /* 0x48380000, ap 123 42.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x80000 0x4>,
+ <0x80010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l3s_clkdm */
+ clocks = <&l3s_clkctrl AM4_L3S_USB_OTG_SS0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000 0x20000>;
+
+ dwc3_1: omap_dwc3@0 {
+ compatible = "ti,am437x-dwc3";
+ reg = <0x0 0x10000>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <1>;
+ ranges = <0 0 0x20000>;
+
+ usb1: usb@10000 {
+ compatible = "snps,dwc3";
+ reg = <0x10000 0x10000>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
+ phys = <&usb2_phy1>;
+ phy-names = "usb2-phy";
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ status = "disabled";
+ snps,dis_u3_susphy_quirk;
+ snps,dis_u2_susphy_quirk;
+ };
+ };
+ };
+
+ target-module@a8000 { /* 0x483a8000, ap 125 6c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xa8000 0x4>;
+ reg-names = "rev";
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_OCP2SCP0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa8000 0x8000>;
+
+ ocp2scp0: ocp2scp@0 {
+ compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x8000>;
+
+ usb2_phy1: phy@8000 {
+ compatible = "ti,am437x-usb2";
+ reg = <0x0 0x8000>;
+ syscon-phy-power = <&scm_conf 0x620>;
+ clocks = <&usb_phy0_always_on_clk32k>,
+ <&l3s_clkctrl AM4_L3S_USB_OTG_SS0_CLKCTRL 8>;
+ clock-names = "wkupclk", "refclk";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+ };
+
+ target-module@c0000 { /* 0x483c0000, ap 127 7a.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xc0000 0x4>,
+ <0xc0010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): per_pwrdm, l3s_clkdm */
+ clocks = <&l3s_clkctrl AM4_L3S_USB_OTG_SS1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc0000 0x20000>;
+
+ dwc3_2: omap_dwc3@0 {
+ compatible = "ti,am437x-dwc3";
+ reg = <0x0 0x10000>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <1>;
+ ranges = <0 0 0x20000>;
+
+ usb2: usb@10000 {
+ compatible = "snps,dwc3";
+ reg = <0x10000 0x10000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
+ phys = <&usb2_phy2>;
+ phy-names = "usb2-phy";
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ status = "disabled";
+ snps,dis_u3_susphy_quirk;
+ snps,dis_u2_susphy_quirk;
+ };
+ };
+ };
+
+ target-module@e8000 { /* 0x483e8000, ap 129 78.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xe8000 0x4>;
+ reg-names = "rev";
+ /* Domains (P, C): per_pwrdm, l4ls_clkdm */
+ clocks = <&l4ls_clkctrl AM4_L4LS_OCP2SCP1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe8000 0x8000>;
+
+ ocp2scp1: ocp2scp@0 {
+ compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x8000>;
+
+ usb2_phy2: phy@8000 {
+ compatible = "ti,am437x-usb2";
+ reg = <0x0 0x8000>;
+ syscon-phy-power = <&scm_conf 0x628>;
+ clocks = <&usb_phy1_always_on_clk32k>,
+ <&l3s_clkctrl AM4_L3S_USB_OTG_SS1_CLKCTRL 8>;
+ clock-names = "wkupclk", "refclk";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+ };
+
+ target-module@f2000 { /* 0x483f2000, ap 112 5a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf2000 0x2000>;
+ };
+ };
+};
+
diff --git a/src/arm/ti/omap/am437x-sbc-t43.dts b/src/arm/ti/omap/am437x-sbc-t43.dts
new file mode 100644
index 0000000..34a5407
--- /dev/null
+++ b/src/arm/ti/omap/am437x-sbc-t43.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ */
+
+#include "am437x-cm-t43.dts"
+#include "compulab-sb-som.dtsi"
+
+/ {
+ model = "CompuLab CM-T43 on SB-SOM-T43";
+ compatible = "compulab,am437x-sbc-t43", "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
+
+ aliases {
+ display0 = &lcd0;
+ };
+};
+
+&am43xx_pinmux {
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM4372_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM4372_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM4372_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM4372_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM4372_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM4372_IOPAD(0x964, PIN_INPUT | MUX_MODE7) /* ecap0_in_pwm0_out.gpio0_7 */
+ >;
+ };
+
+ dss_pinctrl_default: dss-pinctrl-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam0 hd -> DSS DATA 23 */
+ AM4372_IOPAD(0x9b4, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9b8, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9bc, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9c0, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9c4, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9c8, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam1 data 9 -> DSS DATA 16 */
+
+ AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+ AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+ AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+ AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+ AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+ AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+ AM4372_IOPAD(0xa20, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
+ uart0_pins_default: uart0-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
+ AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
+ AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xa6c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1) /* spi2_cs0.i2c1_sda */
+ AM4372_IOPAD(0xa60, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1) /* spi2_sclk.i2c1_scl */
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
+ AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
+ >;
+ };
+
+ usb2_phy1_default: usb2-phy1-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ usb2_phy2_default: usb2-phy2-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ pca9555: pca9555@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom_base: at24@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+};
+
+&mmc1 {
+ status = "okay";
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vsb_3v3>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_pinctrl_default>;
+
+ port {
+ dpi_lcd_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_default>;
+};
+
+&dwc3_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_phy1_default>;
+};
+
+&dwc3_2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_phy2_default>;
+};
+
+&lcd0 {
+ enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
+ &gpio4 28 GPIO_ACTIVE_HIGH>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_lcd_out>;
+ data-lines = <24>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/am437x-sk-evm.dts b/src/arm/ti/omap/am437x-sk-evm.dts
new file mode 100644
index 0000000..9c97006
--- /dev/null
+++ b/src/arm/ti/omap/am437x-sk-evm.dts
@@ -0,0 +1,902 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/* AM437x SK EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "TI AM437x SK EVM";
+ compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
+
+ aliases {
+ display0 = &lcd0;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ /* fixed 32k external oscillator clock */
+ clk_32k_rtc: clk_32k_rtc {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ lcd_bl: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "AM437x-SK-EVM";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound_master>;
+ simple-audio-card,frame-master = <&sound_master>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp1>;
+ };
+
+ sound_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ system-clock-frequency = <24000000>;
+ };
+ };
+
+ matrix_keypad: matrix_keypad0 {
+ compatible = "gpio-matrix-keypad";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&matrix_keypad_pins>;
+
+ debounce-delay-ms = <5>;
+ col-scan-delay-us = <5>;
+
+ row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */
+ &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */
+
+ col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH /* Bank5, pin13 */
+ &gpio5 4 GPIO_ACTIVE_HIGH>; /* Bank5, pin4 */
+
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_DOWN)
+ MATRIX_KEY(0, 1, KEY_RIGHT)
+ MATRIX_KEY(1, 0, KEY_LEFT)
+ MATRIX_KEY(1, 1, KEY_UP)
+ >;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins>;
+
+ led0 {
+ label = "am437x-sk:red:heartbeat";
+ gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led1 {
+ label = "am437x-sk:green:mmc1";
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led2 {
+ label = "am437x-sk:blue:cpu0";
+ gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+
+ led3 {
+ label = "am437x-sk:blue:usr3";
+ gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */
+ default-state = "off";
+ };
+ };
+
+ lcd0: display {
+ compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi";
+ label = "lcd";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ backlight = <&lcd_bl>;
+
+ enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
+ vmmcwl_fixed: fixedregulator-mmcwl {
+ /*
+ * WL_EN is not SDIO standard compliant. It is an out of band
+ * signal and hard to be dealt with in a standard way by the
+ * SDIO core driver.
+ * So modelling the WL_EN line as a regulator was a natural
+ * choice as the MMC core already deals with MMC supplies.
+ */
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcwl_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&am43xx_pinmux {
+ matrix_keypad_pins: matrix-keypad-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xa4c, PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */
+ AM4372_IOPAD(0xa50, PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */
+ AM4372_IOPAD(0xa54, PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */
+ AM4372_IOPAD(0xa58, PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */
+ >;
+ };
+
+ leds_pins: leds-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xa28, PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */
+ AM4372_IOPAD(0xa2c, PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */
+ AM4372_IOPAD(0xa30, PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */
+ AM4372_IOPAD(0xa34, PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */
+ >;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x95c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ AM4372_IOPAD(0x958, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM4372_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM4372_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM4372_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
+ ecap0_pins: backlight-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
+ >;
+ };
+
+ edt_ft5306_ts_pins: edt-ft5306-ts-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x874, PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ AM4372_IOPAD(0x878, PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */
+ >;
+ };
+
+ vpfe0_pins_default: vpfe0-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
+ AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
+ AM4372_IOPAD(0x9b8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/
+ AM4372_IOPAD(0x9bc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/
+ AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
+ AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
+ AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
+ AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
+ AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
+ AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
+ AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
+ AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
+ AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
+ AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
+ AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
+ >;
+ };
+
+ vpfe0_pins_sleep: vpfe0-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9b8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9bc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ >;
+ };
+
+ clkout1_pin: clkout1-pins {
+ pinctrl-single,pins = <
+ 0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* XDMA_EVENT_INTR0/CLKOUT1 */
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
+ AM4372_IOPAD(0x914, PIN_OUTPUT | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM4372_IOPAD(0x928, PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM4372_IOPAD(0x924, PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM4372_IOPAD(0x920, PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
+ AM4372_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
+ AM4372_IOPAD(0x930, PIN_INPUT | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
+ AM4372_IOPAD(0x918, PIN_INPUT | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM4372_IOPAD(0x940, PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ AM4372_IOPAD(0x93c, PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM4372_IOPAD(0x938, PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
+ AM4372_IOPAD(0x934, PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
+
+ /* Slave 2 */
+ AM4372_IOPAD(0x858, PIN_OUTPUT | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ AM4372_IOPAD(0x840, PIN_OUTPUT | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ AM4372_IOPAD(0x854, PIN_OUTPUT | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ AM4372_IOPAD(0x850, PIN_OUTPUT | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ AM4372_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ AM4372_IOPAD(0x848, PIN_OUTPUT | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ AM4372_IOPAD(0x85c, PIN_INPUT | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ AM4372_IOPAD(0x844, PIN_INPUT | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */
+ AM4372_IOPAD(0x86c, PIN_INPUT | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ AM4372_IOPAD(0x868, PIN_INPUT | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ AM4372_IOPAD(0x864, PIN_INPUT | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ AM4372_IOPAD(0x860, PIN_INPUT | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ >;
+ };
+
+ cpsw_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+ /* Slave 2 reset value */
+ AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM4372_IOPAD(0x948, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM4372_IOPAD(0x94c, PIN_OUTPUT | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci-mdio-sleep-pins {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ dss_pins: dss-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */
+ AM4372_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */
+ AM4372_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* DSS DATA 0 */
+ AM4372_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* DSS DATA 15 */
+ AM4372_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* DSS VSYNC */
+ AM4372_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* DSS HSYNC */
+ AM4372_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* DSS PCLK */
+ AM4372_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* DSS AC BIAS EN */
+
+ >;
+ };
+
+ qspi_pins: qspi-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE3) /* gpmc_csn0.qspi_csn */
+ AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
+ AM4372_IOPAD(0x890, PIN_INPUT | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
+ AM4372_IOPAD(0x894, PIN_INPUT | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
+ AM4372_IOPAD(0x898, PIN_INPUT | MUX_MODE3) /* gpmc_wen.qspi_d2 */
+ AM4372_IOPAD(0x89c, PIN_INPUT | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
+ >;
+ };
+
+ mcasp1_pins: mcasp1-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ >;
+ };
+
+ mcasp1_pins_sleep: mcasp1-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ lcd_pins: lcd-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
+ >;
+ };
+
+ usb1_pins: usb1-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xac0, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+ >;
+ };
+
+ usb2_pins: usb2-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+ >;
+ };
+
+ mmc3_pins_default: mmc3-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD21) cam1_data2.mmc2_clk */
+ AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE22) cam1_data3.mmc2_cmd */
+ AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD22) cam1_data4.mmc2_dat0 */
+ AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE23) cam1_data5.mmc2_dat1 */
+ AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD23) cam1_data6.mmc2_dat2 */
+ AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE24) cam1_data7.mmc2_dat3 */
+ >;
+ };
+
+ mmc3_pins_sleep: mmc3-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD21) cam1_data2.mmc2_clk */
+ AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE22) cam1_data3.mmc2_cmd */
+ AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD22) cam1_data4.mmc2_dat0 */
+ AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE23) cam1_data5.mmc2_dat1 */
+ AM4372_IOPAD(0xa00, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD23) cam1_data6.mmc2_dat2 */
+ AM4372_IOPAD(0xa04, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE24) cam1_data7.mmc2_dat3 */
+ >;
+ };
+
+ wlan_pins_default: wlan-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data8.gpio4_8 WL_EN */
+ AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* cam1_wen.gpio4_13 WL_IRQ */
+ >;
+ };
+
+ wlan_pins_sleep: wlan-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data8.gpio4_8 WL_EN */
+ AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* cam1_wen.gpio4_13 WL_IRQ */
+ >;
+ };
+
+ uart1_bt_pins_default: uart1-bt-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
+ AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data9.gpio4_7 BT_EN */
+ >;
+ };
+
+ uart1_bt_pins_sleep: uart1-bt-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x980, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rxd.uart1_rxd */
+ AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_txd.uart1_txd */
+ AM4372_IOPAD(0x978, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */
+ AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */
+ AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_data9.gpio4_7 BT_EN */
+ >;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <100000>;
+
+ tps@24 {
+ compatible = "ti,tps65218";
+ reg = <0x24>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ dcdc1: regulator-dcdc1 {
+ /* VDD_CORE limits min of OPP50 and max of OPP100 */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2: regulator-dcdc2 {
+ /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1378000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3: regulator-dcdc3 {
+ regulator-name = "vdds_ddr";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ regulator-state-disk {
+ regulator-off-in-suspend;
+ };
+ };
+
+ dcdc4: regulator-dcdc4 {
+ regulator-name = "v3_3d";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc5: regulator-dcdc5 {
+ compatible = "ti,tps65218-dcdc5";
+ regulator-name = "v1_0bat";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ dcdc6: regulator-dcdc6 {
+ compatible = "ti,tps65218-dcdc6";
+ regulator-name = "v1_8bat";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo1: regulator-ldo1 {
+ regulator-name = "v1_8d";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ power-button {
+ compatible = "ti,tps65218-pwrbutton";
+ status = "okay";
+ interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+ };
+ };
+
+ at24@50 {
+ compatible = "atmel,24c256";
+ pagesize = <64>;
+ reg = <0x50>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+
+ ov2659@30 {
+ compatible = "ovti,ov2659";
+ reg = <0x30>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&clkout1_pin>;
+
+ clocks = <&clkout1_mux_ck>;
+ clock-names = "xvclk";
+ assigned-clocks = <&clkout1_mux_ck>;
+ assigned-clock-parents = <&clkout1_osc_div_ck>;
+
+ port {
+ ov2659_1: endpoint {
+ remote-endpoint = <&vpfe0_ep>;
+ link-frequencies = /bits/ 64 <70000000>;
+ };
+ };
+ };
+
+ edt-ft5306@38 {
+ status = "okay";
+ compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
+ pinctrl-names = "default";
+ pinctrl-0 = <&edt_ft5306_ts_pins>;
+
+ reg = <0x38>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <272>;
+
+ wakeup-source;
+ };
+
+ tlv320aic3106: tlv320aic3106@1b {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x1b>;
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&dcdc4>;
+ IOVDD-supply = <&dcdc4>;
+ DRVDD-supply = <&dcdc4>;
+ DVDD-supply = <&ldo1>;
+ };
+
+ lis331dlh@18 {
+ compatible = "st,lis331dlh";
+ reg = <0x18>;
+ status = "okay";
+
+ Vdd-supply = <&dcdc4>;
+ Vdd_IO-supply = <&dcdc4>;
+ interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
+ };
+};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&ecap0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins>;
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio4 {
+ status = "okay";
+};
+
+&gpio5 {
+ status = "okay";
+};
+
+&mmc1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+
+ vmmc-supply = <&dcdc4>;
+ bus-width = <4>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart1_bt_pins_default>;
+ pinctrl-1 = <&uart1_bt_pins_sleep>;
+};
+
+&mmc3 {
+ status = "okay";
+ /*
+ * these are on the crossbar and are outlined in the
+ * xbar-event-map element
+ */
+ dmas = <&edma_xbar 30 0 1>,
+ <&edma_xbar 31 0 2>;
+ dma-names = "tx", "rx";
+ vmmc-supply = <&vmmcwl_fixed>;
+ bus-width = <4>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mmc3_pins_default>;
+ pinctrl-1 = <&mmc3_pins_sleep>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ non-removable;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1835";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&wlan_pins_default>;
+ pinctrl-1 = <&wlan_pins_sleep>;
+ reg = <2>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&usb2_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "otg";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+};
+
+&usb2_phy2 {
+ status = "okay";
+};
+
+&usb2 {
+ dr_mode = "host";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_pins>;
+};
+
+&qspi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_pins>;
+
+ spi-max-frequency = <48000000>;
+ flash@0 {
+ compatible = "mx66l51235l";
+ spi-max-frequency = <48000000>;
+ reg = <0>;
+ spi-cpol;
+ spi-cpha;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* MTD partition table.
+ * The ROM checks the first 512KiB
+ * for a valid file to boot(XIP).
+ */
+ partition@0 {
+ label = "QSPI.U_BOOT";
+ reg = <0x00000000 0x00080000>;
+ };
+ partition@1 {
+ label = "QSPI.U_BOOT.backup";
+ reg = <0x00080000 0x00080000>;
+ };
+ partition@2 {
+ label = "QSPI.U-BOOT-SPL_OS";
+ reg = <0x00100000 0x00010000>;
+ };
+ partition@3 {
+ label = "QSPI.U_BOOT_ENV";
+ reg = <0x00110000 0x00010000>;
+ };
+ partition@4 {
+ label = "QSPI.U-BOOT-ENV.backup";
+ reg = <0x00120000 0x00010000>;
+ };
+ partition@5 {
+ label = "QSPI.KERNEL";
+ reg = <0x00130000 0x0800000>;
+ };
+ partition@6 {
+ label = "QSPI.FILESYSTEM";
+ reg = <0x00930000 0x36D0000>;
+ };
+ };
+};
+
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ ethphy1: ethernet-phy@5 {
+ reg = <5>;
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-rxid";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii-rxid";
+ ti,dual-emac-pvid = <2>;
+};
+
+&elm {
+ status = "okay";
+};
+
+&mcasp1 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp1_pins>;
+ pinctrl-1 = <&mcasp1_pins_sleep>;
+
+ status = "okay";
+
+ op-mode = <0>;
+ tdm-slots = <2>;
+ serial-dir = <
+ 0 0 1 2
+ >;
+
+ tx-num-evt = <1>;
+ rx-num-evt = <1>;
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_pins>;
+
+ port {
+ dpi_out: endpoint@0 {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&rtc {
+ clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
+ clock-names = "ext-clk", "int-clk";
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
+
+&cpu {
+ cpu0-supply = <&dcdc2>;
+};
+
+&vpfe0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe0_pins_default>;
+ pinctrl-1 = <&vpfe0_pins_sleep>;
+
+ /* Camera port */
+ port {
+ vpfe0_ep: endpoint {
+ remote-endpoint = <&ov2659_1>;
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
+
+&wkup_m3_ipc {
+ firmware-name = "am43x-evm-scale-data.bin";
+};
+
+&pruss1_mdio {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/am43x-epos-evm.dts b/src/arm/ti/omap/am43x-epos-evm.dts
new file mode 100644
index 0000000..9193a4c
--- /dev/null
+++ b/src/arm/ti/omap/am43x-epos-evm.dts
@@ -0,0 +1,1028 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/* AM43x EPOS EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/tlv320aic31xx.h>
+
+/ {
+ model = "TI AM43x EPOS EVM";
+ compatible = "ti,am43x-epos-evm","ti,am438x","ti,am43";
+
+ aliases {
+ display0 = &lcd0;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ vmmcsd_fixed: fixedregulator-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ };
+
+ vbat: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ lcd0: display {
+ compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
+ label = "lcd";
+
+ backlight = <&lcd_bl>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
+ matrix_keypad: matrix_keypad0 {
+ compatible = "gpio-matrix-keypad";
+ debounce-delay-ms = <5>;
+ col-scan-delay-us = <2>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&matrix_keypad_default>;
+ pinctrl-1 = <&matrix_keypad_sleep>;
+ wakeup-source;
+
+ row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */
+ &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */
+ &gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */
+ &gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */
+
+ col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */
+ &gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */
+ &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */
+ &gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */
+
+ linux,keymap = <0x00000201 /* P1 */
+ 0x01000204 /* P4 */
+ 0x02000207 /* P7 */
+ 0x0300020a /* NUMERIC_STAR */
+ 0x00010202 /* P2 */
+ 0x01010205 /* P5 */
+ 0x02010208 /* P8 */
+ 0x03010200 /* P0 */
+ 0x00020203 /* P3 */
+ 0x01020206 /* P6 */
+ 0x02020209 /* P9 */
+ 0x0302020b /* NUMERIC_POUND */
+ 0x00030067 /* UP */
+ 0x0103006a /* RIGHT */
+ 0x0203006c /* DOWN */
+ 0x03030069>; /* LEFT */
+ };
+
+ lcd_bl: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
+
+ sound0: sound0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "AM43-EPOS-EVM";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker";
+ simple-audio-card,routing =
+ "MIC1LP", "Microphone Jack",
+ "MIC1RP", "Microphone Jack",
+ "MIC1LP", "MICBIAS",
+ "MIC1RP", "MICBIAS",
+ "Headphone Jack", "HPL",
+ "Headphone Jack", "HPR",
+ "Speaker", "SPL",
+ "Speaker", "SPR";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound0_master>;
+ simple-audio-card,frame-master = <&sound0_master>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp1>;
+ system-clock-frequency = <12000000>;
+ };
+
+ sound0_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3111>;
+ system-clock-frequency = <12000000>;
+ };
+ };
+
+ audio_mstrclk: clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+};
+
+&am43xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&unused_pins>;
+
+ unused_pins: unused-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x848, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x850, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x858, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x860, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x864, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x868, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x86c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x878, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x908, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x91c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x920, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9e0, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA0c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA38, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA3c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA40, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA44, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA48, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA4c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA50, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA54, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA58, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA5c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA60, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA64, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0xA68, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA6C, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA74, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA78, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ cpsw_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxdv.rmii1_rxdv */
+ AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */
+ >;
+ };
+
+ cpsw_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci-mdio-sleep-pins {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ nand_flash_x8_default: nand-flash-x8-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */
+ AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
+ AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ >;
+ };
+
+ nand_flash_x8_sleep: nand-flash-x8-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x840, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x800, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x804, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x808, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x80c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x810, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x814, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x818, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x81c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x870, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x874, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
+ ecap0_pins_default: backlight-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+ >;
+ };
+
+ ecap0_pins_sleep: backlight-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x964, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */
+ AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_scl.i2c2_scl */
+ >;
+ };
+
+ spi0_pins_default: spi0-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */
+ AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ AM4372_IOPAD(0x958, PIN_INPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ AM4372_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ >;
+ };
+
+ spi0_pins_sleep: spi0-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x950, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x954, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x958, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x95c, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
+ spi1_pins_default: spi1-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */
+ AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
+ AM4372_IOPAD(0x998, PIN_INPUT | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
+ AM4372_IOPAD(0x99c, PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
+ >;
+ };
+
+ spi1_pins_sleep: spi1-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x990, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x994, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x998, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x99c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins_default: mmc1-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
+ mmc1_pins_sleep: mmc1-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x960, DS0_PIN_OUTPUT_PULLUP | PIN_INPUT | MUX_MODE7)
+ >;
+ };
+
+ matrix_keypad_default: matrix-keypad-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* mii1_tx_clk.gpio3_9 */
+ AM4372_IOPAD(0x930, PIN_OUTPUT | MUX_MODE7) /* mii1_rx_clk.gpio3_10 */
+ AM4372_IOPAD(0x934, PIN_OUTPUT | MUX_MODE7) /* mii1_rxd3.gpio2_18 */
+ AM4372_IOPAD(0x938, PIN_OUTPUT | MUX_MODE7) /* mii1_rxd2.gpio2_19 */
+ AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn.gpio0_12 */
+ AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn.gpio0_13 */
+ AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_rxd.gpio0_14 */
+ AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_txd.gpio0_15 */
+ >;
+ };
+
+ matrix_keypad_sleep: matrix-keypad-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ qspi1_pins_default: qspi1-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
+ AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)
+ AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)
+ AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)
+ AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ qspi1_pins_sleep: qspi1-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x888, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
+ pixcir_ts_pins_default: pixcir-ts-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */
+ >;
+ };
+
+ pixcir_ts_pins_sleep: pixcir-ts-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x844, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */
+ >;
+ };
+
+ hdq_pins: hdq-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */
+ >;
+ };
+
+ dss_pins: dss-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+ AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+ AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+ AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8B8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+ AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+ AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+ AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+ AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+ >;
+ };
+
+ display_mux_pins: display-mux-pins {
+ pinctrl-single,pins = <
+ /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
+ AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
+ vpfe1_pins_default: vpfe1-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */
+ AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */
+ AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */
+ AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */
+ AM4372_IOPAD(0x9dc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */
+ AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */
+ AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */
+ AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */
+ AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */
+ AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */
+ AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */
+ AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */
+ AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */
+ >;
+ };
+
+ vpfe1_pins_sleep: vpfe1-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ >;
+ };
+
+ uart0_pins_default: uart0-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
+ AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
+ AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ uart0_pins_sleep: uart0-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)
+ AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)
+ >;
+ };
+
+ usb2_phy1_default: usb2-phy1-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xac0, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ usb2_phy1_sleep: usb2-phy1-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ usb2_phy2_default: usb2-phy2-default-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xac4, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ usb2_phy2_sleep: usb2-phy2-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ mcasp1_pins: mcasp1-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
+ AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
+ AM4372_IOPAD(0x9a8, PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
+ AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
+ >;
+ };
+
+ mcasp1_sleep_pins: mcasp1-sleep-pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_sleep>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+
+ ethphy0: ethernet-phy@16 {
+ reg = <16>;
+ };
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rmii";
+ phys = <&phy_gmii_sel 1 1>;
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <100000>;
+
+ tps65218: tps65218@24 {
+ reg = <0x24>;
+ compatible = "ti,tps65218";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ dcdc1: regulator-dcdc1 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2: regulator-dcdc2 {
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1378000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3: regulator-dcdc3 {
+ regulator-name = "vdcdc3";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ regulator-state-disk {
+ regulator-off-in-suspend;
+ };
+ };
+
+ dcdc4: regulator-dcdc4 {
+ regulator-name = "vdcdc4";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc5: regulator-dcdc5 {
+ regulator-name = "v1_0bat";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc6: regulator-dcdc6 {
+ regulator-name = "v1_8bat";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: regulator-ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+
+ at24@50 {
+ compatible = "atmel,24c256";
+ pagesize = <64>;
+ reg = <0x50>;
+ };
+
+ pixcir_ts@5c {
+ compatible = "pixcir,pixcir_tangoc";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pixcir_ts_pins_default>;
+ pinctrl-1 = <&pixcir_ts_pins_sleep>;
+
+ reg = <0x5c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+
+ attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+
+ touchscreen-size-x = <1024>;
+ touchscreen-size-y = <600>;
+ };
+
+ tlv320aic3111: tlv320aic3111@18 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3111";
+ reg = <0x18>;
+ status = "okay";
+
+ ai31xx-micbias-vg = <MICBIAS_2_0V>;
+
+ /* Regulators */
+ HPVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
+ SPRVDD-supply = <&vbat>; /* vbat */
+ SPLVDD-supply = <&vbat>; /* vbat */
+ AVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
+ IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
+ DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
+ };
+
+ ov2659@30 {
+ compatible = "ovti,ov2659";
+ reg = <0x30>;
+
+ clocks = <&audio_mstrclk>;
+ clock-names = "xvclk";
+
+ port {
+ ov2659_1: endpoint {
+ remote-endpoint = <&vpfe1_ep>;
+ link-frequencies = /bits/ 64 <70000000>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&display_mux_pins>;
+ status = "okay";
+
+ sel-lcd-hdmi-hog {
+ /*
+ * SelLCDorHDMI selects between display and audio paths:
+ * Low: HDMI display with audio via HDMI
+ * High: LCD display with analog audio via aic3111 codec
+ */
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "SelLCDorHDMI";
+ };
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&nand_flash_x8_default>;
+ pinctrl-1 = <&nand_flash_x8_sleep>;
+ ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ ti,nand-xfer-type = "prefetch-dma";
+ ti,nand-ecc-opt = "bch16";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
+ gpmc,cs-wr-off-ns = <40>;
+ gpmc,adv-on-ns = <0>; /* cs-on-ns */
+ gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
+ gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
+ gpmc,we-on-ns = <0>; /* cs-on-ns */
+ gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
+ gpmc,oe-on-ns = <3>; /* cs-on-ns + tRR + 2 */
+ gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
+ gpmc,access-ns = <30>; /* tCEA + 4*/
+ gpmc,rd-cycle-ns = <40>;
+ gpmc,wr-cycle-ns = <40>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ /* MTD partition table */
+ /* All SPL-* partitions are sized to minimal length
+ * which can be independently programmable. For
+ * NAND flash this is equal to size of erase-block */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "NAND.SPL";
+ reg = <0x00000000 0x00040000>;
+ };
+ partition@1 {
+ label = "NAND.SPL.backup1";
+ reg = <0x00040000 0x00040000>;
+ };
+ partition@2 {
+ label = "NAND.SPL.backup2";
+ reg = <0x00080000 0x00040000>;
+ };
+ partition@3 {
+ label = "NAND.SPL.backup3";
+ reg = <0x000C0000 0x00040000>;
+ };
+ partition@4 {
+ label = "NAND.u-boot-spl-os";
+ reg = <0x00100000 0x00080000>;
+ };
+ partition@5 {
+ label = "NAND.u-boot";
+ reg = <0x00180000 0x00100000>;
+ };
+ partition@6 {
+ label = "NAND.u-boot-env";
+ reg = <0x00280000 0x00040000>;
+ };
+ partition@7 {
+ label = "NAND.u-boot-env.backup1";
+ reg = <0x002C0000 0x00040000>;
+ };
+ partition@8 {
+ label = "NAND.kernel";
+ reg = <0x00300000 0x00700000>;
+ };
+ partition@9 {
+ label = "NAND.file-system";
+ reg = <0x00a00000 0x1f600000>;
+ };
+ };
+};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&rtc_target {
+ status = "disabled";
+};
+
+&tscadc {
+ status = "okay";
+
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
+};
+
+&ecap0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&ecap0_pins_default>;
+ pinctrl-1 = <&ecap0_pins_sleep>;
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi0_pins_default>;
+ pinctrl-1 = <&spi0_pins_sleep>;
+ ti,pindir-d0-out-d1-in;
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi1_pins_default>;
+ pinctrl-1 = <&spi1_pins_sleep>;
+ ti,pindir-d0-out-d1-in;
+};
+
+&usb2_phy1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usb2_phy1_default>;
+ pinctrl-1 = <&usb2_phy1_sleep>;
+};
+
+&usb1 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb2_phy2 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usb2_phy2_default>;
+ pinctrl-1 = <&usb2_phy2_sleep>;
+};
+
+&usb2 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&qspi {
+ status = "disabled"; /* Disable GPMC (NAND) when enabling QSPI */
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qspi1_pins_default>;
+ pinctrl-1 = <&qspi1_pins_sleep>;
+
+ spi-max-frequency = <48000000>;
+ flash@0 {
+ compatible = "mx66l51235l";
+ spi-max-frequency = <48000000>;
+ reg = <0>;
+ spi-cpol;
+ spi-cpha;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* MTD partition table.
+ * The ROM checks the first 512KiB
+ * for a valid file to boot(XIP).
+ */
+ partition@0 {
+ label = "QSPI.U_BOOT";
+ reg = <0x00000000 0x00080000>;
+ };
+ partition@1 {
+ label = "QSPI.U_BOOT.backup";
+ reg = <0x00080000 0x00080000>;
+ };
+ partition@2 {
+ label = "QSPI.U-BOOT-SPL_OS";
+ reg = <0x00100000 0x00010000>;
+ };
+ partition@3 {
+ label = "QSPI.U_BOOT_ENV";
+ reg = <0x00110000 0x00010000>;
+ };
+ partition@4 {
+ label = "QSPI.U-BOOT-ENV.backup";
+ reg = <0x00120000 0x00010000>;
+ };
+ partition@5 {
+ label = "QSPI.KERNEL";
+ reg = <0x00130000 0x0800000>;
+ };
+ partition@6 {
+ label = "QSPI.FILESYSTEM";
+ reg = <0x00930000 0x36D0000>;
+ };
+ };
+};
+
+&hdq {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdq_pins>;
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_pins>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&vpfe1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe1_pins_default>;
+ pinctrl-1 = <&vpfe1_pins_sleep>;
+
+ port {
+ vpfe1_ep: endpoint {
+ remote-endpoint = <&ov2659_1>;
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart0_pins_default>;
+ pinctrl-1 = <&uart0_pins_sleep>;
+};
+
+&mcasp1 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp1_pins>;
+ pinctrl-1 = <&mcasp1_sleep_pins>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializer */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+&mux_synctimer32k_ck {
+ assigned-clocks = <&mux_synctimer32k_ck>;
+ assigned-clock-parents = <&clkdiv32k_ick>;
+};
+
+&cpu {
+ cpu0-supply = <&dcdc2>;
+};
+
+&wkup_m3_ipc {
+ firmware-name = "am43x-evm-scale-data.bin";
+};
+
+&pruss1_mdio {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/am43xx-clocks.dtsi b/src/arm/ti/omap/am43xx-clocks.dtsi
new file mode 100644
index 0000000..9a5437b
--- /dev/null
+++ b/src/arm/ti/omap/am43xx-clocks.dtsi
@@ -0,0 +1,1003 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for AM43xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&scm_clocks {
+ sys_clkin_ck: clock-sys-clkin-31@40 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "sys_clkin_ck";
+ clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
+ ti,bit-shift = <31>;
+ reg = <0x0040>;
+ };
+
+ crystal_freq_sel_ck: clock-crystal-freq-sel-29@40 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "crystal_freq_sel_ck";
+ clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+ ti,bit-shift = <29>;
+ reg = <0x0040>;
+ };
+
+ sysboot_freq_sel_ck: clock-sysboot-freq-sel-22@44e10040 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "sysboot_freq_sel_ck";
+ clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+ ti,bit-shift = <22>;
+ reg = <0x0040>;
+ };
+
+ adc_tsc_fck: clock-adc-tsc-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "adc_tsc_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dcan0_fck: clock-dcan0-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dcan0_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dcan1_fck: clock-dcan1-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dcan1_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ mcasp0_fck: clock-mcasp0-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "mcasp0_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ mcasp1_fck: clock-mcasp1-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "mcasp1_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ smartreflex0_fck: clock-smartreflex0-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "smartreflex0_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ smartreflex1_fck: clock-smartreflex1-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "smartreflex1_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ sha0_fck: clock-sha0-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "sha0_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ aes0_fck: clock-aes0-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "aes0_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ rng_fck: clock-rng-fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "rng_fck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ ehrpwm0_tbclk: clock-ehrpwm0-tbclk-0@664 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm0_tbclk";
+ clocks = <&l4ls_gclk>;
+ ti,bit-shift = <0>;
+ reg = <0x0664>;
+ };
+
+ ehrpwm1_tbclk: clock-ehrpwm1-tbclk-1@664 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm1_tbclk";
+ clocks = <&l4ls_gclk>;
+ ti,bit-shift = <1>;
+ reg = <0x0664>;
+ };
+
+ ehrpwm2_tbclk: clock-ehrpwm2-tbclk-2@664 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm2_tbclk";
+ clocks = <&l4ls_gclk>;
+ ti,bit-shift = <2>;
+ reg = <0x0664>;
+ };
+
+ ehrpwm3_tbclk: clock-ehrpwm3-tbclk-4@664 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm3_tbclk";
+ clocks = <&l4ls_gclk>;
+ ti,bit-shift = <4>;
+ reg = <0x0664>;
+ };
+
+ ehrpwm4_tbclk: clock-ehrpwm4-tbclk-5@664 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm4_tbclk";
+ clocks = <&l4ls_gclk>;
+ ti,bit-shift = <5>;
+ reg = <0x0664>;
+ };
+
+ ehrpwm5_tbclk: clock-ehrpwm5-tbclk-6@664 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm5_tbclk";
+ clocks = <&l4ls_gclk>;
+ ti,bit-shift = <6>;
+ reg = <0x0664>;
+ };
+};
+&prcm_clocks {
+ clk_32768_ck: clock-clk-32768 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "clk_32768_ck";
+ clock-frequency = <32768>;
+ };
+
+ clk_rc32k_ck: clock-clk-rc32k {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "clk_rc32k_ck";
+ clock-frequency = <32768>;
+ };
+
+ virt_19200000_ck: clock-virt-19200000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_19200000_ck";
+ clock-frequency = <19200000>;
+ };
+
+ virt_24000000_ck: clock-virt-24000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_24000000_ck";
+ clock-frequency = <24000000>;
+ };
+
+ virt_25000000_ck: clock-virt-25000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_25000000_ck";
+ clock-frequency = <25000000>;
+ };
+
+ virt_26000000_ck: clock-virt-26000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_26000000_ck";
+ clock-frequency = <26000000>;
+ };
+
+ tclkin_ck: clock-tclkin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "tclkin_ck";
+ clock-frequency = <26000000>;
+ };
+
+ dpll_core_ck: clock@2d20 {
+ #clock-cells = <0>;
+ compatible = "ti,am3-dpll-core-clock";
+ clock-output-names = "dpll_core_ck";
+ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+ reg = <0x2d20>, <0x2d24>, <0x2d2c>, <0x2d48>, <0x2d4c>;
+ };
+
+ dpll_core_x2_ck: clock-dpll-core-x2 {
+ #clock-cells = <0>;
+ compatible = "ti,am3-dpll-x2-clock";
+ clock-output-names = "dpll_core_x2_ck";
+ clocks = <&dpll_core_ck>;
+ };
+
+ dpll_core_m4_ck: clock-dpll-core-m4-8@2d38 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m4_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x2d38>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_core_m5_ck: clock-dpll-core-m5-8@2d3c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m5_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x2d3c>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_core_m6_ck: clock-dpll-core-m6-8@2d40 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m6_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x2d40>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_mpu_ck: clock@2d60 {
+ #clock-cells = <0>;
+ compatible = "ti,am3-dpll-clock";
+ clock-output-names = "dpll_mpu_ck";
+ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+ reg = <0x2d60>, <0x2d64>, <0x2d6c>, <0x2d88>, <0x2d8c>;
+ };
+
+ dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@2d70 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_mpu_m2_ck";
+ clocks = <&dpll_mpu_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x2d70>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ mpu_periphclk: clock-mpu-periphclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "mpu_periphclk";
+ clocks = <&dpll_mpu_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ dpll_ddr_ck: clock@2da0 {
+ #clock-cells = <0>;
+ compatible = "ti,am3-dpll-clock";
+ clock-output-names = "dpll_ddr_ck";
+ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+ reg = <0x2da0>, <0x2da4>, <0x2dac>, <0x2dc8>, <0x2dcc>;
+ };
+
+ dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@2db0 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_ddr_m2_ck";
+ clocks = <&dpll_ddr_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x2db0>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_disp_ck: clock@2e20 {
+ #clock-cells = <0>;
+ compatible = "ti,am3-dpll-clock";
+ clock-output-names = "dpll_disp_ck";
+ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+ reg = <0x2e20>, <0x2e24>, <0x2e2c>, <0x2e48>, <0x2e4c>;
+ };
+
+ dpll_disp_m2_ck: clock-dpll-disp-m2-8@2e30 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_disp_m2_ck";
+ clocks = <&dpll_disp_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x2e30>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ ti,set-rate-parent;
+ };
+
+ dpll_per_ck: clock@2de0 {
+ #clock-cells = <0>;
+ compatible = "ti,am3-dpll-j-type-clock";
+ clock-output-names = "dpll_per_ck";
+ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+ reg = <0x2de0>, <0x2de4>, <0x2dec>, <0x2e08>, <0x2e0c>;
+ };
+
+ dpll_per_m2_ck: clock-dpll-per-m2-8@2df0 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m2_ck";
+ clocks = <&dpll_per_ck>;
+ ti,max-div = <127>;
+ ti,autoidle-shift = <8>;
+ reg = <0x2df0>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_per_m2_div4_wkupdm_ck";
+ clocks = <&dpll_per_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_per_m2_div4_ck";
+ clocks = <&dpll_per_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ clk_24mhz: clock-clk-24mhz {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "clk_24mhz";
+ clocks = <&dpll_per_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <8>;
+ };
+
+ clkdiv32k_ck: clock-clkdiv32k {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "clkdiv32k_ck";
+ clocks = <&clk_24mhz>;
+ clock-mult = <1>;
+ clock-div = <732>;
+ };
+
+ clkdiv32k_ick: clock-clkdiv32k-ick-8@2a38 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "clkdiv32k_ick";
+ clocks = <&clkdiv32k_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x2a38>;
+ };
+
+ sysclk_div: clock-sysclk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "sysclk_div";
+ clocks = <&dpll_core_m4_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ pruss_ocp_gclk: clock-pruss-ocp-gclk@4248 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "pruss_ocp_gclk";
+ clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
+ reg = <0x4248>;
+ };
+
+ clk_32k_tpm_ck: clock-clk-32k-tpm {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "clk_32k_tpm_ck";
+ clock-frequency = <32768>;
+ };
+
+ timer1_fck: clock-timer1-fck@4200 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer1_fck";
+ clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
+ reg = <0x4200>;
+ };
+
+ timer2_fck: clock-timer2-fck@4204 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer2_fck";
+ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+ reg = <0x4204>;
+ };
+
+ timer3_fck: clock-timer3-fck@4208 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer3_fck";
+ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+ reg = <0x4208>;
+ };
+
+ timer4_fck: clock-timer4-fck@420c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer4_fck";
+ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+ reg = <0x420c>;
+ };
+
+ timer5_fck: clock-timer5-fck@4210 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer5_fck";
+ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+ reg = <0x4210>;
+ };
+
+ timer6_fck: clock-timer6-fck@4214 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer6_fck";
+ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+ reg = <0x4214>;
+ };
+
+ timer7_fck: clock-timer7-fck@4218 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer7_fck";
+ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+ reg = <0x4218>;
+ };
+
+ wdt1_fck: clock-wdt1-fck@422c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "wdt1_fck";
+ clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
+ reg = <0x422c>;
+ };
+
+ adc_mag_fck: adc_mag_fck@424c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&sys_clkin_ck>, <&dpll_per_m2_ck>;
+ reg = <0x424c>;
+ };
+
+ l3_gclk: clock-l3-gclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "l3_gclk";
+ clocks = <&dpll_core_m4_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_core_m4_div2_ck";
+ clocks = <&sysclk_div>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ l4hs_gclk: clock-l4hs-gclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "l4hs_gclk";
+ clocks = <&dpll_core_m4_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ l3s_gclk: clock-l3s-gclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "l3s_gclk";
+ clocks = <&dpll_core_m4_div2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ l4ls_gclk: clock-l4ls-gclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "l4ls_gclk";
+ clocks = <&dpll_core_m4_div2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "cpsw_125mhz_gclk";
+ clocks = <&dpll_core_m5_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@4238 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "cpsw_cpts_rft_clk";
+ clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
+ reg = <0x4238>;
+ };
+
+ dpll_clksel_mac_clk: clock-dpll-clksel-mac-2@4234 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_clksel_mac_clk";
+ clocks = <&dpll_core_m5_ck>;
+ reg = <0x4234>;
+ ti,bit-shift = <2>;
+ ti,dividers = <2>, <5>;
+ };
+
+ clk_32k_mosc_ck: clock-clk-32k-mosc {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "clk_32k_mosc_ck";
+ clock-frequency = <32768>;
+ };
+
+ gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@4240 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "gpio0_dbclk_mux_ck";
+ clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
+ reg = <0x4240>;
+ };
+
+ mmc_clk: clock-mmc {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "mmc_clk";
+ clocks = <&dpll_per_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ gfx_fclk_clksel_ck: clock-gfx-fclk-clksel-1@423c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "gfx_fclk_clksel_ck";
+ clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x423c>;
+ };
+
+ gfx_fck_div_ck: clock-gfx-fck-div@423c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "gfx_fck_div_ck";
+ clocks = <&gfx_fclk_clksel_ck>;
+ reg = <0x423c>;
+ ti,max-div = <2>;
+ };
+
+ disp_clk: clock-disp@4244 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "disp_clk";
+ clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
+ reg = <0x4244>;
+ ti,set-rate-parent;
+ };
+
+ dpll_extdev_ck: clock@2e60 {
+ #clock-cells = <0>;
+ compatible = "ti,am3-dpll-clock";
+ clock-output-names = "dpll_extdev_ck";
+ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+ reg = <0x2e60>, <0x2e64>, <0x2e6c>, <0x2e88>, <0x2e8c>;
+ };
+
+ dpll_extdev_m2_ck: clock-dpll-extdev-m2-8@2e70 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_extdev_m2_ck";
+ clocks = <&dpll_extdev_ck>;
+ ti,max-div = <127>;
+ ti,autoidle-shift = <8>;
+ reg = <0x2e70>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ mux_synctimer32k_ck: clock-mux-synctimer32k@4230 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "mux_synctimer32k_ck";
+ clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
+ reg = <0x4230>;
+ };
+
+ timer8_fck: clock-timer8-fck@421c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer8_fck";
+ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+ reg = <0x421c>;
+ };
+
+ timer9_fck: clock-timer9-fck@4220 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer9_fck";
+ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+ reg = <0x4220>;
+ };
+
+ timer10_fck: clock-timer10-fck@4224 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer10_fck";
+ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+ reg = <0x4224>;
+ };
+
+ timer11_fck: clock-timer11-fck@4228 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "timer11_fck";
+ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+ reg = <0x4228>;
+ };
+
+ cpsw_50m_clkdiv: clock-cpsw-50m-clkdiv {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "cpsw_50m_clkdiv";
+ clocks = <&dpll_core_m5_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ cpsw_5m_clkdiv: clock-cpsw-5m-clkdiv {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "cpsw_5m_clkdiv";
+ clocks = <&cpsw_50m_clkdiv>;
+ clock-mult = <1>;
+ clock-div = <10>;
+ };
+
+ dpll_ddr_x2_ck: clock-dpll-ddr-x2 {
+ #clock-cells = <0>;
+ compatible = "ti,am3-dpll-x2-clock";
+ clock-output-names = "dpll_ddr_x2_ck";
+ clocks = <&dpll_ddr_ck>;
+ };
+
+ dpll_ddr_m4_ck: clock-dpll-ddr-m4-8@2db8 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_ddr_m4_ck";
+ clocks = <&dpll_ddr_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x2db8>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_per_clkdcoldo: clock-dpll-per-clkdcoldo-8@2e14 {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clock-output-names = "dpll_per_clkdcoldo";
+ clocks = <&dpll_per_ck>;
+ ti,clock-mult = <1>;
+ ti,clock-div = <1>;
+ ti,autoidle-shift = <8>;
+ reg = <0x2e14>;
+ ti,invert-autoidle-bit;
+ };
+
+ dll_aging_clk_div: clock-dll-aging-clk-div@4250 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dll_aging_clk_div";
+ clocks = <&sys_clkin_ck>;
+ reg = <0x4250>;
+ ti,dividers = <8>, <16>, <32>;
+ };
+
+ div_core_25m_ck: clock-div-core-25m {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "div_core_25m_ck";
+ clocks = <&sysclk_div>;
+ clock-mult = <1>;
+ clock-div = <8>;
+ };
+
+ func_12m_clk: clock-func-12m {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "func_12m_clk";
+ clocks = <&dpll_per_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <16>;
+ };
+
+ vtp_clk_div: clock-vtp-clk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "vtp_clk_div";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ usbphy_32khz_clkmux: clock-usbphy-32khz-clkmux@4260 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "usbphy_32khz_clkmux";
+ clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
+ reg = <0x4260>;
+ };
+
+ usb_phy0_always_on_clk32k: clock-usb-phy0-always-on-clk32k-8@2a40 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "usb_phy0_always_on_clk32k";
+ clocks = <&usbphy_32khz_clkmux>;
+ ti,bit-shift = <8>;
+ reg = <0x2a40>;
+ };
+
+ usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@2a48 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "usb_phy1_always_on_clk32k";
+ clocks = <&usbphy_32khz_clkmux>;
+ ti,bit-shift = <8>;
+ reg = <0x2a48>;
+ };
+
+ clkout1_osc_div_ck: clock-clkout1-osc-div-ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "clkout1_osc_div_ck";
+ clocks = <&sys_clkin_ck>;
+ ti,bit-shift = <20>;
+ ti,max-div = <4>;
+ reg = <0x4100>;
+ };
+
+ clkout1_src2_mux_ck: clock-clkout1-src2-mux-ck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "clkout1_src2_mux_ck";
+ clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
+ <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
+ <&dpll_mpu_m2_ck>;
+ reg = <0x4100>;
+ };
+
+ clkout1_src2_pre_div_ck: clock-clkout1-src2-pre-div-ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "clkout1_src2_pre_div_ck";
+ clocks = <&clkout1_src2_mux_ck>;
+ ti,bit-shift = <4>;
+ ti,max-div = <8>;
+ reg = <0x4100>;
+ };
+
+ clkout1_src2_post_div_ck: clock-clkout1-src2-post-div-ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "clkout1_src2_post_div_ck";
+ clocks = <&clkout1_src2_pre_div_ck>;
+ ti,bit-shift = <8>;
+ ti,max-div = <32>;
+ ti,index-power-of-two;
+ reg = <0x4100>;
+ };
+
+ clkout1_mux_ck: clock-clkout1-mux-ck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "clkout1_mux_ck";
+ clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
+ <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
+ ti,bit-shift = <16>;
+ reg = <0x4100>;
+ };
+
+ clkout1_ck: clock-clkout1-ck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "clkout1_ck";
+ clocks = <&clkout1_mux_ck>;
+ ti,bit-shift = <23>;
+ reg = <0x4100>;
+ };
+};
+
+&prcm {
+ wkup_cm: clock@2800 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "wkup_cm";
+ reg = <0x2800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2800 0x400>;
+
+ l3s_tsc_clkctrl: clock@120 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3s_tsc_clkctrl";
+ reg = <0x120 0x4>;
+ #clock-cells = <2>;
+ };
+
+ l4_wkup_aon_clkctrl: clock@228 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4_wkup_aon_clkctrl";
+ reg = <0x228 0xc>;
+ #clock-cells = <2>;
+ };
+
+ l4_wkup_clkctrl: clock@220 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4_wkup_clkctrl";
+ reg = <0x220 0x4>, <0x328 0x44>;
+ #clock-cells = <2>;
+ };
+
+ };
+
+ mpu_cm: clock@8300 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "mpu_cm";
+ reg = <0x8300 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x8300 0x100>;
+
+ mpu_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "mpu_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ gfx_l3_cm: clock@8400 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "gfx_l3_cm";
+ reg = <0x8400 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x8400 0x100>;
+
+ gfx_l3_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "gfx_l3_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l4_rtc_cm: clock@8500 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l4_rtc_cm";
+ reg = <0x8500 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x8500 0x100>;
+
+ l4_rtc_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4_rtc_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ per_cm: clock@8800 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "per_cm";
+ reg = <0x8800 0xc00>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x8800 0xc00>;
+
+ l3_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3_clkctrl";
+ reg = <0x20 0x3c>, <0x78 0x2c>;
+ #clock-cells = <2>;
+ };
+
+ l3s_clkctrl: clock@68 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3s_clkctrl";
+ reg = <0x68 0xc>, <0x220 0x4c>;
+ #clock-cells = <2>;
+ };
+
+ pruss_ocp_clkctrl: clock@320 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "pruss_ocp_clkctrl";
+ reg = <0x320 0x4>;
+ #clock-cells = <2>;
+ };
+
+ l4ls_clkctrl: clock@420 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4ls_clkctrl";
+ reg = <0x420 0x1a4>;
+ #clock-cells = <2>;
+ };
+
+ emif_clkctrl: clock@720 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "emif_clkctrl";
+ reg = <0x720 0x4>;
+ #clock-cells = <2>;
+ };
+
+ dss_clkctrl: clock@a20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "dss_clkctrl";
+ reg = <0xa20 0x4>;
+ #clock-cells = <2>;
+ };
+
+ cpsw_125mhz_clkctrl: clock@b20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "cpsw_125mhz_clkctrl";
+ reg = <0xb20 0x4>;
+ #clock-cells = <2>;
+ };
+
+ };
+};
diff --git a/src/arm/ti/omap/am57-pruss.dtsi b/src/arm/ti/omap/am57-pruss.dtsi
new file mode 100644
index 0000000..46c5383
--- /dev/null
+++ b/src/arm/ti/omap/am57-pruss.dtsi
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Common PRUSS data for TI AM57xx platforms
+ */
+
+&ocp {
+ pruss1_tm: target-module@4b226000 {
+ compatible = "ti,sysc-pruss", "ti,sysc";
+ reg = <0x4b226000 0x4>,
+ <0x4b226004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+ SYSC_PRUSS_SUB_MWAIT)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4b200000 0x80000>;
+
+ pruss1: pruss@0 {
+ compatible = "ti,am5728-pruss";
+ reg = <0x0 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pruss1_mem: memories@0 {
+ reg = <0x0 0x2000>,
+ <0x2000 0x2000>,
+ <0x10000 0x8000>;
+ reg-names = "dram0", "dram1",
+ "shrdram2";
+ };
+
+ pruss1_cfg: cfg@26000 {
+ compatible = "ti,pruss-cfg", "syscon";
+ reg = <0x26000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x2000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pruss1_iepclk_mux: iepclk-mux@30 {
+ reg = <0x30>;
+ #clock-cells = <0>;
+ clocks = <&dpll_gmac_m3x2_ck>, /* icss_iep_clk */
+ <&dpll_gmac_h13x2_ck>; /* icss_clk */
+ };
+ };
+ };
+
+ pruss1_mii_rt: mii-rt@32000 {
+ compatible = "ti,pruss-mii", "syscon";
+ reg = <0x32000 0x58>;
+ };
+
+ pruss1_intc: interrupt-controller@20000 {
+ compatible = "ti,pruss-intc";
+ reg = <0x20000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host_intr0", "host_intr1",
+ "host_intr2", "host_intr3",
+ "host_intr4", "host_intr5",
+ "host_intr6", "host_intr7";
+ };
+
+ pru1_0: pru@34000 {
+ compatible = "ti,am5728-pru";
+ reg = <0x34000 0x3000>,
+ <0x22000 0x400>,
+ <0x22400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am57xx-pru1_0-fw";
+ };
+
+ pru1_1: pru@38000 {
+ compatible = "ti,am5728-pru";
+ reg = <0x38000 0x3000>,
+ <0x24000 0x400>,
+ <0x24400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am57xx-pru1_1-fw";
+ };
+
+ pruss1_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&dpll_gmac_h13x2_ck>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ reg = <0x32400 0x90>;
+ };
+ };
+ };
+
+ pruss2_tm: target-module@4b2a6000 {
+ compatible = "ti,sysc-pruss", "ti,sysc";
+ reg = <0x4b2a6000 0x4>,
+ <0x4b2a6004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+ SYSC_PRUSS_SUB_MWAIT)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4b280000 0x80000>;
+
+ pruss2: pruss@0 {
+ compatible = "ti,am5728-pruss";
+ reg = <0x0 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pruss2_mem: memories@0 {
+ reg = <0x0 0x2000>,
+ <0x2000 0x2000>,
+ <0x10000 0x8000>;
+ reg-names = "dram0", "dram1",
+ "shrdram2";
+ };
+
+ pruss2_cfg: cfg@26000 {
+ compatible = "ti,pruss-cfg", "syscon";
+ reg = <0x26000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x2000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pruss2_iepclk_mux: iepclk-mux@30 {
+ reg = <0x30>;
+ #clock-cells = <0>;
+ clocks = <&dpll_gmac_m3x2_ck>, /* icss_iep_clk */
+ <&dpll_gmac_h13x2_ck>; /* icss_clk */
+ };
+ };
+ };
+
+ pruss2_mii_rt: mii-rt@32000 {
+ compatible = "ti,pruss-mii", "syscon";
+ reg = <0x32000 0x58>;
+ };
+
+ pruss2_intc: interrupt-controller@20000 {
+ compatible = "ti,pruss-intc";
+ reg = <0x20000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host_intr0", "host_intr1",
+ "host_intr2", "host_intr3",
+ "host_intr4", "host_intr5",
+ "host_intr6", "host_intr7";
+ };
+
+ pru2_0: pru@34000 {
+ compatible = "ti,am5728-pru";
+ reg = <0x34000 0x3000>,
+ <0x22000 0x400>,
+ <0x22400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am57xx-pru2_0-fw";
+ };
+
+ pru2_1: pru@38000 {
+ compatible = "ti,am5728-pru";
+ reg = <0x38000 0x3000>,
+ <0x24000 0x400>,
+ <0x24400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am57xx-pru2_1-fw";
+ };
+
+ pruss2_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&dpll_gmac_h13x2_ck>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ reg = <0x32400 0x90>;
+ };
+ };
+ };
+};
diff --git a/src/arm/ti/omap/am5718.dtsi b/src/arm/ti/omap/am5718.dtsi
new file mode 100644
index 0000000..6d7530a
--- /dev/null
+++ b/src/arm/ti/omap/am5718.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra72x.dtsi"
+#include "am57-pruss.dtsi"
+
+/ {
+ compatible = "ti,am5718", "ti,dra7";
+};
+
+/*
+ * These modules are not present on AM5718
+ *
+ * ATL
+ * VCP1, VCP2
+ * MLB
+ * ISS
+ * USB3
+ */
+
+&usb3_tm {
+ status = "disabled";
+};
+
+&atl_tm {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/am571x-idk-touchscreen.dtso b/src/arm/ti/omap/am571x-idk-touchscreen.dtso
new file mode 100644
index 0000000..c051ee6
--- /dev/null
+++ b/src/arm/ti/omap/am571x-idk-touchscreen.dtso
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen: edt-ft5506@38 {
+ compatible = "edt,edt-ft5506", "edt,edt-ft5x06";
+
+ reg = <0x38>;
+
+ interrupt-parent = <&gpio5>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+
+ /* GPIO line is inverted before going to touch panel */
+ reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+
+ touchscreen-size-x = <1920>;
+ touchscreen-size-y = <1200>;
+
+ wakeup-source;
+ };
+};
diff --git a/src/arm/ti/omap/am571x-idk.dts b/src/arm/ti/omap/am571x-idk.dts
new file mode 100644
index 0000000..4842502
--- /dev/null
+++ b/src/arm/ti/omap/am571x-idk.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am5718.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "dra7-mmc-iodelay.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
+#include "am57xx-idk-common.dtsi"
+#include "dra7-ipu-dsp-common.dtsi"
+
+/ {
+ model = "TI AM5718 IDK";
+ compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ipu2_memory_region: ipu2-memory@95800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x95800000 0x0 0x3800000>;
+ reusable;
+ status = "okay";
+ };
+
+ dsp1_memory_region: dsp1-memory@99000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x99000000 0x0 0x4000000>;
+ reusable;
+ status = "okay";
+ };
+
+ ipu1_memory_region: ipu1-memory@9d000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x9d000000 0x0 0x2000000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ cpu0-led {
+ label = "status0:red:cpu0";
+ gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "cpu0";
+ };
+
+ usr0-led {
+ label = "status0:green:usr";
+ gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ heartbeat-led {
+ label = "status0:blue:heartbeat";
+ gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "heartbeat";
+ };
+
+ usr1-led {
+ label = "status1:red:usr";
+ gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ usr2-led {
+ label = "status1:green:usr";
+ gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ mmc0-led {
+ label = "status1:blue:mmc0";
+ gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ idk-leds {
+ status = "disabled";
+ compatible = "gpio-leds";
+ red0-led {
+ label = "idk:red0";
+ gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green0-led {
+ label = "idk:green0";
+ gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue0-led {
+ label = "idk:blue0";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red1-led {
+ label = "idk:red1";
+ gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green1-led {
+ label = "idk:green1";
+ gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue1-led {
+ label = "idk:blue1";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red2-led {
+ label = "idk:red2";
+ gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green2-led {
+ label = "idk:green2";
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue2-led {
+ label = "idk:blue2";
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red3-led {
+ label = "idk:red3";
+ gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green3-led {
+ label = "idk:green3";
+ gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue3-led {
+ label = "idk:blue3";
+ gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+};
+
+&extcon_usb2 {
+ id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+ vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+};
+
+&sn65hvs882 {
+ load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+};
+
+&ipu2 {
+ status = "okay";
+ memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+ status = "okay";
+ memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+ status = "okay";
+ memory-region = <&dsp1_memory_region>;
+};
+
+&pcie1_rc {
+ status = "okay";
+ gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "hs";
+ pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_3_3v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+};
+
+&pruss1_mdio {
+ status = "disabled";
+};
+
+&pruss2_mdio {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/am5728.dtsi b/src/arm/ti/omap/am5728.dtsi
new file mode 100644
index 0000000..5e0bdf1
--- /dev/null
+++ b/src/arm/ti/omap/am5728.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra74x.dtsi"
+#include "am57-pruss.dtsi"
+
+/ {
+ compatible = "ti,am5728", "ti,dra7";
+};
+
+/*
+ * These modules are not present on AM5728
+ *
+ * EVE1, EVE2
+ * ATL
+ * VCP1, VCP2
+ * MLB
+ * ISS
+ * USB3, USB4
+ */
+
+&usb3_tm {
+ status = "disabled";
+};
+
+&usb4_tm {
+ status = "disabled";
+};
+
+&atl_tm {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/am5729-beagleboneai.dts b/src/arm/ti/omap/am5729-beagleboneai.dts
new file mode 100644
index 0000000..9a234dc
--- /dev/null
+++ b/src/arm/ti/omap/am5729-beagleboneai.dts
@@ -0,0 +1,698 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014-2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include "am57xx-commercial-grade.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+#include "dra74-ipu-dsp-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/dra.h>
+
+/ {
+ model = "BeagleBoard.org BeagleBone AI";
+ compatible = "beagle,am5729-beagleboneai", "ti,am5728",
+ "ti,dra742", "ti,dra74", "ti,dra7";
+
+ aliases {
+ rtc0 = &tps659038_rtc;
+ rtc1 = &rtc;
+ display0 = &hdmi_conn;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ipu2_memory_region: ipu2-memory@95800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x95800000 0x0 0x3800000>;
+ reusable;
+ status = "okay";
+ };
+
+ dsp1_memory_region: dsp1-memory@99000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x99000000 0x0 0x4000000>;
+ reusable;
+ status = "okay";
+ };
+
+ ipu1_memory_region: ipu1-memory@9d000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x9d000000 0x0 0x2000000>;
+ reusable;
+ status = "okay";
+ };
+
+ dsp2_memory_region: dsp2-memory@9f000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x9f000000 0x0 0x800000>;
+ reusable;
+ status = "okay";
+ };
+
+ };
+
+ vdd_adc: gpioregulator-vdd_adc {
+ compatible = "regulator-gpio";
+ regulator-name = "vdd_adc";
+ vin-supply = <&vdd_5v>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0
+ 3300000 1>;
+ };
+
+ vdd_5v: fixedregulator-vdd_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vtt_fixed: fixedregulator-vtt {
+ /* TPS51200 */
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_fixed";
+ vin-supply = <&vdd_ddr>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "beaglebone:green:usr0";
+ gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led1 {
+ label = "beaglebone:green:usr1";
+ gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led2 {
+ label = "beaglebone:green:usr2";
+ gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu";
+ default-state = "off";
+ };
+
+ led3 {
+ label = "beaglebone:green:usr3";
+ gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ led4 {
+ label = "beaglebone:green:usr4";
+ gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "netdev";
+ default-state = "off";
+ };
+ };
+
+ hdmi_conn: connector@0 {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_encoder_out>;
+ };
+ };
+ };
+
+ hdmi_enc: encoder@0 {
+ /* "ti,tpd12s016" software compatible with "ti,tpd12s015"
+ * no need for individual driver
+ */
+ compatible = "ti,tpd12s015";
+ gpios = <0>,
+ <0>,
+ <&gpio7 12 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ hdmi_encoder_in: endpoint@0 {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <0x1>;
+
+ hdmi_encoder_out: endpoint@0 {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ emmc_pwrseq: emmc_pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+ };
+
+ brcmf_pwrseq: brcmf_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>, /* BT-REG-ON */
+ <&gpio3 18 GPIO_ACTIVE_LOW>; /* WL-REG-ON */
+ };
+
+ extcon_usb1: extcon_usb1 {
+ compatible = "linux,extcon-usb-gpio";
+ ti,enable-id-detection;
+ id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps659038: tps659038@58 {
+ compatible = "ti,tps659038";
+ reg = <0x58>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+ ti,palmas-override-powerhold;
+
+ tps659038_pmic {
+ compatible = "ti,tps659038-pmic";
+
+ smps12-in-supply = <&vdd_5v>;
+ smps3-in-supply = <&vdd_5v>;
+ smps45-in-supply = <&vdd_5v>;
+ smps6-in-supply = <&vdd_5v>;
+ smps7-in-supply = <&vdd_5v>;
+ mps3-in-supply = <&vdd_5v>;
+ smps8-in-supply = <&vdd_5v>;
+ smps9-in-supply = <&vdd_5v>;
+ ldo1-in-supply = <&vdd_5v>;
+ ldo2-in-supply = <&vdd_5v>;
+ ldo3-in-supply = <&vdd_5v>;
+ ldo4-in-supply = <&vdd_5v>;
+ ldo9-in-supply = <&vdd_5v>;
+ ldoln-in-supply = <&vdd_5v>;
+ ldousb-in-supply = <&vdd_5v>;
+ ldortc-in-supply = <&vdd_5v>;
+
+ regulators {
+ vdd_mpu: smps12 {
+ /* VDD_MPU */
+ regulator-name = "smps12";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_ddr: smps3 {
+ /* VDD_DDR EMIF1 EMIF2 */
+ regulator-name = "smps3";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_dspeve: smps45 {
+ /* VDD_DSPEVE on AM572 */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_gpu: smps6 {
+ /* VDD_GPU */
+ regulator-name = "smps6";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_core: smps7 {
+ /* VDD_CORE */
+ regulator-name = "smps7";
+ regulator-min-microvolt = < 850000>; /*** 1.15V */
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_iva: smps8 {
+ /* VDD_IVAHD */ /*** 1.06V */
+ regulator-name = "smps8";
+ };
+
+ vdd_3v3: smps9 {
+ /* VDD_3V3 */
+ regulator-name = "smps9";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_sd: ldo1 {
+ /* VDDSHV8 - VSDMMC */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd_1v8: ldo2 {
+ /* VDDSH18V */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8_phy_ldo3: ldo3 {
+ /* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8_phy_ldo4: ldo4 {
+ /* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* LDO5-8 unused */
+
+ vdd_rtc: ldo9 {
+ /* VDD_RTC */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = < 840000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8_pll: ldoln {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldortc_reg: ldortc {
+ /* VDDA_RTC */
+ regulator-name = "ldortc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ regen1: regen1 {
+ /* VDD_3V3_ON */
+ regulator-name = "regen1";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ regen2: regen2 {
+ /* Needed for PMIC internal resource */
+ regulator-name = "regen2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ tps659038_rtc: tps659038_rtc {
+ compatible = "ti,palmas-rtc";
+ interrupt-parent = <&tps659038>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ };
+
+ tps659038_pwr_button: tps659038_pwr_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps659038>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ ti,palmas-long-press-seconds = <12>;
+ };
+
+ tps659038_gpio: tps659038_gpio {
+ compatible = "ti,palmas-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ /* STMPE811 touch screen controller */
+ stmpe811@41 {
+ compatible = "st,stmpe811";
+ reg = <0x41>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio2>;
+ interrupt-controller;
+ id = <0>;
+ blocks = <0x5>;
+ irq-trigger = <0x1>;
+ st,mod-12b = <1>; /* 12-bit ADC */
+ st,ref-sel = <0>; /* internal ADC reference */
+ st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */
+ st,sample-time = <4>; /* ADC converstion time: 80 clocks */
+
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ st,norequest-mask = <0x00>; /* mask any channels to be used by touchscreen */
+ adc0: iio-device@0 {
+ #io-channel-cells = <1>;
+ iio-channels = <&adc0 4>, <&adc0 1>, <&adc0 2>, <&adc0 3>, <&adc0 4>, <&adc0 5>, <&adc0 6>;
+ iio-channel-names = "AIN0_P9_39", "AIN1_P9_40", "AIN2_P9_37", "AIN3_P9_38",
+ "AIN4_P9_33", "AIN5_P9_36", "AIN6_P9_35";
+ };
+ };
+
+ stmpe_touchscreen {
+ status = "disabled";
+ compatible = "st,stmpe-ts";
+ /* 8 sample average control */
+ st,ave-ctrl = <3>;
+ /* 7 length fractional part in z */
+ st,fraction-z = <7>;
+ /*
+ * 50 mA typical 80 mA max touchscreen drivers
+ * current limit value
+ */
+ st,i-drive = <1>;
+ /* 1 ms panel driver settling time */
+ st,settling = <3>;
+ /* 5 ms touch detect interrupt delay */
+ st,touch-det-delay = <5>;
+ };
+
+ stmpe_gpio {
+ compatible = "st,stmpe-gpio";
+ };
+
+ stmpe_pwm {
+ compatible = "st,stmpe-pwm";
+ #pwm-cells = <2>;
+ };
+ };
+};
+
+&mcspi3 {
+ status = "okay";
+ ti,pindir-d0-out-d1-in;
+
+ sn65hvs882: sn65hvs882@0 {
+ compatible = "pisosr-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpol;
+ };
+};
+
+&cpu0 {
+ vdd-supply = <&vdd_mpu>;
+ voltage-tolerance = <1>;
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&davinci_mdio_sw {
+ reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <2>;
+
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+};
+
+&mac_sw {
+ status = "okay";
+};
+
+&cpsw_port1 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-rxid";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&ocp {
+ pruss1_shmem: pruss_shmem@4b200000 {
+ status = "okay";
+ compatible = "ti,pruss-shmem";
+ reg = <0x4b200000 0x020000>;
+ };
+
+ pruss2_shmem: pruss_shmem@4b280000 {
+ status = "okay";
+ compatible = "ti,pruss-shmem";
+ reg = <0x4b280000 0x020000>;
+ };
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vdd_3v3>;
+ vqmmc-supply = <&vdd_sd>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+};
+
+&mmc2 {
+ status = "okay";
+ vmmc-supply = <&vdd_1v8>;
+ vqmmc-supply = <&vdd_1v8>;
+ bus-width = <8>;
+ ti,non-removable;
+ non-removable;
+ mmc-pwrseq = <&emmc_pwrseq>;
+
+ ti,needs-special-reset;
+ dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
+ dma-names = "tx", "rx";
+
+};
+
+&mmc4 {
+ /* DS: Default speed (DS) up to 25 MHz, including 1- and 4-bit modes (3.3 V signaling). */
+ /* HS: High speed up to 50 MHz (3.3 V signaling). */
+ /* SDR12: SDR up to 25 MHz (1.8 V signaling). */
+ /* SDR25: SDR up to 50 MHz (1.8 V signaling). */
+ /* SDR50: SDR up to 100 MHz (1.8 V signaling). */
+ /* SDR104: SDR up to 208 MHz (1.8 V signaling) */
+ /* DDR50: DDR up to 50 MHz (1.8 V signaling). */
+ status = "okay";
+
+ ti,needs-special-reset;
+ vmmc-supply = <&vdd_3v3>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ bus-width = <4>;
+ ti,non-removable;
+ non-removable;
+ no-1-8-v;
+ max-frequency = <24000000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mmc-pwrseq = <&brcmf_pwrseq>;
+
+ brcmf: wifi@1 {
+ status = "okay";
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+
+ brcm,sd-head-align = <4>;
+ brcm,sd_head_align = <4>;
+ brcm,sd_sgentry_align = <512>;
+
+ interrupt-parent = <&gpio3>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "host-wake";
+ };
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&omap_dwc3_1 {
+ extcon = <&extcon_usb1>;
+};
+
+&usb2 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&dss {
+ status = "okay";
+ vdda_video-supply = <&vdd_1v8_pll>;
+};
+
+&hdmi {
+ status = "okay";
+ vdda-supply = <&vdd_1v8_phy_ldo4>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_encoder_in>;
+ };
+ };
+};
+
+&bandgap {
+ status = "okay";
+};
+
+&cpu_alert0 {
+ temperature = <55000>; /* milliCelsius */
+};
+
+&cpu_crit {
+ temperature = <85000>; /* milliCelsius */
+};
+
+&gpu_crit {
+ temperature = <85000>; /* milliCelsius */
+};
+
+&core_crit {
+ temperature = <85000>; /* milliCelsius */
+};
+
+&dspeve_crit {
+ temperature = <85000>; /* milliCelsius */
+};
+
+&iva_crit {
+ temperature = <85000>; /* milliCelsius */
+};
+
+&sata {
+ status = "disabled";
+};
+
+&sata_phy {
+ status = "disabled";
+};
+
+/* bluetooth */
+&uart6 {
+ status = "okay";
+};
+
+/* cape header stuff */
+&i2c4 {
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&ipu2 {
+ status = "okay";
+ memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+ status = "okay";
+ memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+ status = "okay";
+ memory-region = <&dsp1_memory_region>;
+};
+
+&dsp2 {
+ status = "okay";
+ memory-region = <&dsp2_memory_region>;
+};
diff --git a/src/arm/ti/omap/am572x-idk-common.dtsi b/src/arm/ti/omap/am572x-idk-common.dtsi
new file mode 100644
index 0000000..1d66278
--- /dev/null
+++ b/src/arm/ti/omap/am572x-idk-common.dtsi
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-idk-common.dtsi"
+#include "dra74-ipu-dsp-common.dtsi"
+
+/ {
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ipu2_memory_region: ipu2-memory@95800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x95800000 0x0 0x3800000>;
+ reusable;
+ status = "okay";
+ };
+
+ dsp1_memory_region: dsp1-memory@99000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x99000000 0x0 0x4000000>;
+ reusable;
+ status = "okay";
+ };
+
+ ipu1_memory_region: ipu1-memory@9d000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x9d000000 0x0 0x2000000>;
+ reusable;
+ status = "okay";
+ };
+
+ dsp2_memory_region: dsp2-memory@9f000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x9f000000 0x0 0x800000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
+ status-leds {
+ compatible = "gpio-leds";
+ cpu0-led {
+ label = "status0:red:cpu0";
+ gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "cpu0";
+ };
+
+ usr0-led {
+ label = "status0:green:usr";
+ gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ heartbeat-led {
+ label = "status0:blue:heartbeat";
+ gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "heartbeat";
+ };
+
+ cpu1-led {
+ label = "status1:red:cpu1";
+ gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "cpu1";
+ };
+
+ usr1-led {
+ label = "status1:green:usr";
+ gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ mmc0-led {
+ label = "status1:blue:mmc0";
+ gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ idk-leds {
+ status = "disabled";
+ compatible = "gpio-leds";
+ red0-led {
+ label = "idk:red0";
+ gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green0-led {
+ label = "idk:green0";
+ gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue0-led {
+ label = "idk:blue0";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red1-led {
+ label = "idk:red1";
+ gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green1-led {
+ label = "idk:green1";
+ gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue1-led {
+ label = "idk:blue1";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red2-led {
+ label = "idk:red2";
+ gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green2-led {
+ label = "idk:green2";
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue2-led {
+ label = "idk:blue2";
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red3-led {
+ label = "idk:red3";
+ gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green3-led {
+ label = "idk:green3";
+ gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue3-led {
+ label = "idk:blue3";
+ gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+};
+
+&extcon_usb2 {
+ id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+};
+
+&sn65hvs882 {
+ load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1_rc {
+ status = "okay";
+ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&ipu2 {
+ status = "okay";
+ memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+ status = "okay";
+ memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+ status = "okay";
+ memory-region = <&dsp1_memory_region>;
+};
+
+&dsp2 {
+ status = "okay";
+ memory-region = <&dsp2_memory_region>;
+};
diff --git a/src/arm/ti/omap/am572x-idk-touchscreen.dtso b/src/arm/ti/omap/am572x-idk-touchscreen.dtso
new file mode 100644
index 0000000..573e932
--- /dev/null
+++ b/src/arm/ti/omap/am572x-idk-touchscreen.dtso
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen: edt-ft5506@38 {
+ compatible = "edt,edt-ft5506", "edt,edt-ft5x06";
+
+ reg = <0x38>;
+
+ interrupt-parent = <&gpio3>;
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+
+ /* GPIO line is inverted before going to touch panel */
+ reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+
+ touchscreen-size-x = <1920>;
+ touchscreen-size-y = <1200>;
+
+ wakeup-source;
+ };
+};
diff --git a/src/arm/ti/omap/am572x-idk.dts b/src/arm/ti/omap/am572x-idk.dts
new file mode 100644
index 0000000..94a738c
--- /dev/null
+++ b/src/arm/ti/omap/am572x-idk.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "am5728.dtsi"
+#include "dra7-mmc-iodelay.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+#include "am572x-idk-common.dtsi"
+
+/ {
+ model = "TI AM5728 IDK";
+ compatible = "ti,am5728-idk", "ti,am5728", "ti,dra7";
+};
+
+&mmc1 {
+ pinctrl-names = "default", "hs";
+ pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_3_3v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20>;
+};
+
+&pruss1_mdio {
+ status = "disabled";
+};
+
+&pruss2_mdio {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/am5748.dtsi b/src/arm/ti/omap/am5748.dtsi
new file mode 100644
index 0000000..a1f029e
--- /dev/null
+++ b/src/arm/ti/omap/am5748.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra74x-p.dtsi"
+#include "am57-pruss.dtsi"
+
+/ {
+ compatible = "ti,am5748", "ti,dra762", "ti,dra7";
+};
+
+/*
+ * These modules are not present on AM5748
+ *
+ * EVE1, EVE2
+ * ATL
+ * VCP1, VCP2
+ * MLB
+ * ISS
+ * USB3, USB4
+ */
+
+&usb3_tm {
+ status = "disabled";
+};
+
+&usb4_tm {
+ status = "disabled";
+};
+
+&atl_tm {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/am574x-idk.dts b/src/arm/ti/omap/am574x-idk.dts
new file mode 100644
index 0000000..47b9174
--- /dev/null
+++ b/src/arm/ti/omap/am574x-idk.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+
+/dts-v1/;
+
+#include "am5748.dtsi"
+#include "dra7-mmc-iodelay.dtsi"
+#include "dra76x-mmc-iodelay.dtsi"
+#include "am572x-idk-common.dtsi"
+
+/ {
+ model = "TI AM5748 IDK";
+ compatible = "ti,am5748-idk", "ti,am5748", "ti,dra762", "ti,dra7";
+};
+
+&qspi {
+ spi-max-frequency = <96000000>;
+ flash@0 {
+ spi-max-frequency = <96000000>;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default", "hs";
+ pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_3_3v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_default>;
+ pinctrl-2 = <&mmc2_pins_default>;
+};
+
+&emif1 {
+ status = "okay";
+};
+
+&pruss1_mdio {
+ status = "disabled";
+};
+
+&pruss2_mdio {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/am57xx-beagle-x15-common.dtsi b/src/arm/ti/omap/am57xx-beagle-x15-common.dtsi
new file mode 100644
index 0000000..994e69a
--- /dev/null
+++ b/src/arm/ti/omap/am57xx-beagle-x15-common.dtsi
@@ -0,0 +1,647 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am5728.dtsi"
+#include "am57xx-commercial-grade.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+#include "dra74-ipu-dsp-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+ aliases {
+ rtc0 = &mcp_rtc;
+ rtc1 = &tps659038_rtc;
+ rtc2 = &rtc;
+ display0 = &hdmi0;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ };
+
+ main_12v0: fixedregulator-main_12v0 {
+ /* main supply */
+ compatible = "regulator-fixed";
+ regulator-name = "main_12v0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ evm_5v0: fixedregulator-evm_5v0 {
+ /* Output of TPS54531D */
+ compatible = "regulator-fixed";
+ regulator-name = "evm_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&main_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ipu2_memory_region: ipu2-memory@95800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x95800000 0x0 0x3800000>;
+ reusable;
+ status = "okay";
+ };
+
+ dsp1_memory_region: dsp1-memory@99000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x99000000 0x0 0x4000000>;
+ reusable;
+ status = "okay";
+ };
+
+ ipu1_memory_region: ipu1-memory@9d000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x9d000000 0x0 0x2000000>;
+ reusable;
+ status = "okay";
+ };
+
+ dsp2_memory_region: dsp2-memory@9f000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x9f000000 0x0 0x800000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
+ vdd_3v3: fixedregulator-vdd_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3";
+ vin-supply = <®en1>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aic_dvdd: fixedregulator-aic_dvdd {
+ compatible = "regulator-fixed";
+ regulator-name = "aic_dvdd_fixed";
+ vin-supply = <&vdd_3v3>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vtt_fixed: fixedregulator-vtt {
+ /* TPS51200 */
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_fixed";
+ vin-supply = <&smps3_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "beagle-x15:usr0";
+ gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led1 {
+ label = "beagle-x15:usr1";
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+
+ led2 {
+ label = "beagle-x15:usr2";
+ gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led3 {
+ label = "beagle-x15:usr3";
+ gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "disk-activity";
+ default-state = "off";
+ };
+ };
+
+ gpio_fan: gpio_fan {
+ /* Based on 5v 500mA AFB02505HHB */
+ compatible = "gpio-fan";
+ gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = <0 0>,
+ <13000 1>;
+ #cooling-cells = <2>;
+ };
+
+ hdmi0: connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+
+ tpd12s015: encoder {
+ compatible = "ti,tpd12s015";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ sound0: sound0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "BeagleBoard-X15";
+ simple-audio-card,widgets =
+ "Line", "Line Out",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "MIC2L", "Line In",
+ "MIC2R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound0_master>;
+ simple-audio-card,frame-master = <&sound0_master>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp3>;
+ };
+
+ sound0_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3104>;
+ clocks = <&clkout2_clk>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps659038: tps659038@58 {
+ compatible = "ti,tps659038";
+ reg = <0x58>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+ ti,palmas-override-powerhold;
+
+ tps659038_pmic {
+ compatible = "ti,tps659038-pmic";
+
+ regulators {
+ smps12_reg: smps12 {
+ /* VDD_MPU */
+ regulator-name = "smps12";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps3_reg: smps3 {
+ /* VDD_DDR */
+ regulator-name = "smps3";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_DSPEVE, VDD_IVA, VDD_GPU */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_CORE */
+ regulator-name = "smps6";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* SMPS7 unused */
+
+ smps8_reg: smps8 {
+ /* VDD_1V8 */
+ regulator-name = "smps8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* SMPS9 unused */
+
+ ldo1_reg: ldo1 {
+ /* VDD_SD / VDDSHV8 */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VDD_SHV5 */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDA_1V8_PHYA */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ /* VDDA_1V8_PHYB */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ /* VDD_RTC */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ regen1: regen1 {
+ /* VDD_3V3_ON */
+ regulator-name = "regen1";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ tps659038_rtc: tps659038_rtc {
+ compatible = "ti,palmas-rtc";
+ interrupt-parent = <&tps659038>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ };
+
+ tps659038_pwr_button: tps659038_pwr_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps659038>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ ti,palmas-long-press-seconds = <12>;
+ };
+
+ tps659038_gpio: tps659038_gpio {
+ compatible = "ti,palmas-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ extcon_usb2: tps659038_usb {
+ compatible = "ti,palmas-usb-vid";
+ ti,enable-vbus-detection;
+ vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ };
+
+ tmp102: tmp102@48 {
+ compatible = "ti,tmp102";
+ reg = <0x48>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tlv320aic3104: tlv320aic3104@18 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3104";
+ reg = <0x18>;
+ assigned-clocks = <&clkoutmux2_clk_mux>;
+ assigned-clock-parents = <&sys_clk2_dclk_div>;
+
+ status = "okay";
+ adc-settle-ms = <40>;
+
+ AVDD-supply = <&vdd_3v3>;
+ IOVDD-supply = <&vdd_3v3>;
+ DRVDD-supply = <&vdd_3v3>;
+ DVDD-supply = <&aic_dvdd>;
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ mcp_rtc: rtc@6f {
+ compatible = "microchip,mcp7941x";
+ reg = <0x6f>;
+ interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
+ <&dra7_pmx_core 0x424>;
+ interrupt-names = "irq", "wakeup";
+
+ vcc-supply = <&vdd_3v3>;
+ wakeup-source;
+ };
+};
+
+&gpio7_target {
+ ti,no-reset-on-init;
+ ti,no-idle-on-init;
+};
+
+&cpu0 {
+ vdd-supply = <&smps12_reg>;
+ voltage-tolerance = <1>;
+};
+
+&uart3 {
+ status = "okay";
+ interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <&dra7_pmx_core 0x3f8>;
+};
+
+&davinci_mdio_sw {
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ phy1: ethernet-phy@2 {
+ reg = <2>;
+ };
+};
+
+&mac_sw {
+ status = "okay";
+};
+
+&cpsw_port1 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-rxid";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-rxid";
+ ti,dual-emac-pvid = <2>;
+};
+
+&mmc1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+
+ bus-width = <4>;
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+ no-1-8-v;
+};
+
+&mmc2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_default>;
+
+ vmmc-supply = <&vdd_3v3>;
+ vqmmc-supply = <&vdd_3v3>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+};
+
+&sata {
+ status = "okay";
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&omap_dwc3_2 {
+ extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+ /*
+ * Stand alone usage is peripheral only.
+ * However, with some resistor modifications
+ * this port can be used via expansion connectors
+ * as "host" or "dual-role". If so, provide
+ * the necessary dr_mode override in the expansion
+ * board's DT.
+ */
+ dr_mode = "peripheral";
+};
+
+&cpu_trips {
+ cpu_alert1: cpu_alert1 {
+ temperature = <50000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+};
+
+&cpu_cooling_maps {
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+};
+
+&thermal_zones {
+ board_thermal: board_thermal {
+ polling-delay-passive = <1250>; /* milliseconds */
+ polling-delay = <1500>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&tmp102 0>;
+
+ board_trips: trips {
+ board_alert0: board_alert {
+ temperature = <40000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ board_crit: board_crit {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ board_cooling_maps: cooling-maps {
+ map0 {
+ trip = <&board_alert0>;
+ cooling-device =
+ <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+};
+
+&dss {
+ status = "okay";
+
+ vdda_video-supply = <&ldoln_reg>;
+};
+
+&hdmi {
+ status = "okay";
+ vdda-supply = <&ldo4_reg>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
+
+&pcie1_rc {
+ status = "okay";
+ gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&mcasp3 {
+ #sound-dai-cells = <0>;
+ assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_clkin2>;
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializers */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+&ipu2 {
+ status = "okay";
+ memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+ status = "okay";
+ memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+ status = "okay";
+ memory-region = <&dsp1_memory_region>;
+};
+
+&dsp2 {
+ status = "okay";
+ memory-region = <&dsp2_memory_region>;
+};
+
+&pruss1_mdio {
+ status = "disabled";
+};
+
+&pruss2_mdio {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/am57xx-beagle-x15-revb1.dts b/src/arm/ti/omap/am57xx-beagle-x15-revb1.dts
new file mode 100644
index 0000000..83e174e
--- /dev/null
+++ b/src/arm/ti/omap/am57xx-beagle-x15-revb1.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+ model = "TI AM5728 BeagleBoard-X15 rev B1";
+};
+
+&tpd12s015 {
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
+ <&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio2_30, LS OE */
+ <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+ pinctrl-names = "default", "hs";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ vmmc-supply = <&vdd_3v3>;
+ vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_3_3v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
+};
+
+/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
+&phy1 {
+ max-speed = <100>;
+};
diff --git a/src/arm/ti/omap/am57xx-beagle-x15-revc.dts b/src/arm/ti/omap/am57xx-beagle-x15-revc.dts
new file mode 100644
index 0000000..656dd84
--- /dev/null
+++ b/src/arm/ti/omap/am57xx-beagle-x15-revc.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+ model = "TI AM5728 BeagleBoard-X15 rev C";
+};
+
+&tpd12s015 {
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
+ <&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio2_30, LS OE */
+ <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+ pinctrl-names = "default", "hs";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ vmmc-supply = <&vdd_3v3>;
+ vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_3_3v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20>;
+};
diff --git a/src/arm/ti/omap/am57xx-beagle-x15.dts b/src/arm/ti/omap/am57xx-beagle-x15.dts
new file mode 100644
index 0000000..0a8b165
--- /dev/null
+++ b/src/arm/ti/omap/am57xx-beagle-x15.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+ /* NOTE: This describes the "original" pre-production A2 revision */
+ model = "TI AM5728 BeagleBoard-X15";
+};
+
+&tpd12s015 {
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
+ <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */
+ <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+ pinctrl-names = "default", "hs";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+
+ vmmc-supply = <&ldo1_reg>;
+ no-1-8-v;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_3_3v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
+};
+
+/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
+&phy1 {
+ max-speed = <100>;
+};
diff --git a/src/arm/ti/omap/am57xx-cl-som-am57x.dts b/src/arm/ti/omap/am57xx-cl-som-am57x.dts
new file mode 100644
index 0000000..4fd831f
--- /dev/null
+++ b/src/arm/ti/omap/am57xx-cl-som-am57x.dts
@@ -0,0 +1,628 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for CompuLab CL-SOM-AM57x System-on-Module
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am5728.dtsi"
+
+/ {
+ model = "CompuLab CL-SOM-AM57x";
+ compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins_default>;
+
+ led0 {
+ label = "cl-som-am57x:green";
+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+
+ vdd_3v3: fixedregulator-vdd_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ads7846reg: fixedregulator-ads7846-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "ads7846-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ sound0: sound0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "CL-SOM-AM57x-Sound-Card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink0_master>;
+ simple-audio-card,frame-master = <&dailink0_master>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Microphone", "Microphone Jack",
+ "Line", "Line Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "RHPOUT",
+ "Headphone Jack", "LHPOUT",
+ "LLINEIN", "Line Jack",
+ "MICIN", "Mic Bias",
+ "Mic Bias", "Microphone Jack";
+
+ dailink0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp3>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&wm8731>;
+ system-clock-frequency = <12000000>;
+ };
+ };
+};
+
+&dra7_pmx_core {
+ leds_pins_default: leds-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14) /* gpmc_a15.gpio2_5 */
+ >;
+ };
+
+ i2c1_pins_default: i2c1-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
+ DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
+ >;
+ };
+
+ i2c3_pins_default: i2c3-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
+ DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
+ >;
+ };
+
+ i2c4_pins_default: i2c4-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10) /* mcasp1_acl.i2c4_sda */
+ DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10) /* mcasp1_fsr.i2c4_scl */
+ >;
+ };
+
+ tps659038_pins_default: tps659038-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ qspi1_pins: qspi1-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
+ DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d0 */
+ DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d1 */
+ DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
+ DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
+ DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */
+ >;
+ };
+
+ cpsw_pins_default: cpsw-default-pins {
+ pinctrl-single,pins = <
+ /* Slave at addr 0x0 */
+ DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_tclk */
+ DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_tctl */
+ DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3 */
+ DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td2 */
+ DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td1 */
+ DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td0 */
+ DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rclk */
+ DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rctl */
+ DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd3 */
+ DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd2 */
+ DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd1 */
+ DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd0 */
+
+ /* Slave at addr 0x1 */
+ DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_tclk */
+ DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
+ DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
+ DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
+ DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
+ DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
+ DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
+ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
+ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
+ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
+ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
+ DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
+ >;
+ };
+
+ cpsw_pins_sleep: cpsw-sleep-pins {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
+
+ /* Slave 2 */
+ DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
+ >;
+ };
+
+ davinci_mdio_pins_default: davinci-mdio-default-pins {
+ pinctrl-single,pins = <
+ /* MDIO */
+ DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */
+ DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d11.mdio_d */
+ >;
+ };
+
+ davinci_mdio_pins_sleep: davinci-mdio-sleep-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15)
+ >;
+ };
+
+ ads7846_pins: ads7846-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */
+ >;
+ };
+
+ mcasp3_pins_default: mcasp3-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
+ DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
+ DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
+ >;
+ };
+
+ mcasp3_pins_sleep: mcasp3-sleep-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
+ >;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_default>;
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins_default>;
+ clock-frequency = <400000>;
+};
+
+&i2c4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_default>;
+ clock-frequency = <400000>;
+
+ tps659038: tps659038@58 {
+ compatible = "ti,tps659038";
+ reg = <0x58>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps659038_pins_default>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ tps659038_pmic {
+ compatible = "ti,tps659038-pmic";
+
+ regulators {
+ smps12_reg: smps12 {
+ /* VDD_MPU */
+ regulator-name = "smps12";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps3_reg: smps3 {
+ /* VDD_DDR */
+ regulator-name = "smps3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_DSPEVE */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_GPU */
+ regulator-name = "smps6";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps7_reg: smps7 {
+ /* VDD_CORE */
+ regulator-name = "smps7";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ /* VDD_IVA */
+ regulator-name = "smps8";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps9_reg: smps9 {
+ /* PMIC_3V3 */
+ regulator-name = "smps9";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+
+ ldo1_reg: ldo1 {
+ /* VDD_SD / VDDSHV8 */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VDD_1V8 */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDA_1V8_PHYA - supplies VDDA_SATA, VDDA_USB1/2/3 */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ /* VDDA_1V8_PHYB - supplies VDDA_HDMI, VDDA_PCIE/0/1 */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ /* VDD_RTC */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* regen1 not used */
+ };
+ };
+
+ tps659038_pwr_button: tps659038_pwr_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps659038>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ ti,palmas-long-press-seconds = <12>;
+ };
+
+ tps659038_gpio: tps659038_gpio {
+ compatible = "ti,palmas-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ rtc0: rtc@56 {
+ compatible = "emmicro,em3027";
+ reg = <0x56>;
+ };
+
+ eeprom_module: atmel@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ wm8731: wm8731@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8731";
+ reg = <0x1a>;
+ status = "okay";
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&smps12_reg>;
+ voltage-tolerance = <1>;
+};
+
+&sata {
+ status = "okay";
+};
+
+&mailbox5 {
+ status = "okay";
+ mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
+ status = "okay";
+ };
+ mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
+ status = "okay";
+ };
+};
+
+&mailbox6 {
+ status = "okay";
+ mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
+ status = "okay";
+ };
+ mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
+ status = "okay";
+ };
+};
+
+&mmc2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_default>;
+
+ vmmc-supply = <&vdd_3v3>;
+ bus-width = <8>;
+ ti,non-removable;
+ cap-mmc-dual-data-rate;
+};
+
+&qspi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi1_pins>;
+
+ spi-max-frequency = <48000000>;
+
+ spi_flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80", "jedec,spi-nor";
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <48000000>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0xc0000>;
+ };
+
+ partition@c0000 {
+ label = "uboot environment";
+ reg = <0xc0000 0x40000>;
+ };
+
+ partition@100000 {
+ label = "reserved";
+ reg = <0x100000 0x0>;
+ };
+ };
+
+ /* touch controller */
+ touchscreen@1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ads7846_pins>;
+
+ compatible = "ti,ads7846";
+ vcc-supply = <&ads7846reg>;
+
+ reg = <1>; /* CS1 */
+ spi-max-frequency = <1500000>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <31 0>;
+ pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
+
+
+ ti,x-min = /bits/ 16 <0x0>;
+ ti,x-max = /bits/ 16 <0x0fff>;
+ ti,y-min = /bits/ 16 <0x0>;
+ ti,y-max = /bits/ 16 <0x0fff>;
+
+ ti,x-plate-ohms = /bits/ 16 <180>;
+ ti,pressure-max = /bits/ 16 <255>;
+
+ ti,debounce-max = /bits/ 16 <30>;
+ ti,debounce-tol = /bits/ 16 <10>;
+ ti,debounce-rep = /bits/ 16 <1>;
+
+ wakeup-source;
+ };
+};
+
+&mac_sw {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_pins_default>;
+ pinctrl-1 = <&cpsw_pins_sleep>;
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-txid";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii-txid";
+ ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_pins_default>;
+ pinctrl-1 = <&davinci_mdio_pins_sleep>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&usb2 {
+ dr_mode = "host";
+};
+
+&mcasp3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp3_pins_default>;
+ pinctrl-1 = <&mcasp3_pins_sleep>;
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializers */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+};
+
+&gpio3_target {
+ ti,no-reset-on-init;
+};
+
+&gpio2_target {
+ status = "okay";
+ ti,no-reset-on-init;
+};
+
+&pruss1_mdio {
+ status = "disabled";
+};
+
+&pruss2_mdio {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/am57xx-commercial-grade.dtsi b/src/arm/ti/omap/am57xx-commercial-grade.dtsi
new file mode 100644
index 0000000..3eed6e0
--- /dev/null
+++ b/src/arm/ti/omap/am57xx-commercial-grade.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+&cpu_alert0 {
+ temperature = <80000>; /* milliCelsius */
+};
+
+&cpu_crit {
+ temperature = <90000>; /* milliCelsius */
+};
+
+&gpu_crit {
+ temperature = <90000>; /* milliCelsius */
+};
+
+&core_crit {
+ temperature = <90000>; /* milliCelsius */
+};
+
+&dspeve_crit {
+ temperature = <90000>; /* milliCelsius */
+};
+
+&iva_crit {
+ temperature = <90000>; /* milliCelsius */
+};
diff --git a/src/arm/ti/omap/am57xx-evm.dtso b/src/arm/ti/omap/am57xx-evm.dtso
new file mode 100644
index 0000000..12385a3
--- /dev/null
+++ b/src/arm/ti/omap/am57xx-evm.dtso
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DT overlay for AM57xx GP EVM boards
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+&{/} {
+ compatible = "ti,am5728-evm", "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+ model = "TI AM5728 EVM";
+
+ aliases {
+ display0 = "/display";
+ display1 = "/connector"; // Fixme: &lcd0 and &hdmi0 could be
+ // resolved here correcly based on
+ // information in the base dtb symbol
+ // table with a fix in dtc
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-user1 {
+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ label = "USER1";
+ linux,code = <BTN_1>;
+ };
+
+ button-user2 {
+ gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+ label = "USER2";
+ linux,code = <BTN_2>;
+ };
+
+ button-user3 {
+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ label = "USER3";
+ linux,code = <BTN_3>;
+ };
+
+ button-user4 {
+ gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ label = "USER4";
+ linux,code = <BTN_4>;
+ };
+
+ button-user5 {
+ gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+ label = "USER5";
+ linux,code = <BTN_5>;
+ };
+ };
+
+ lcd0: display {
+ compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
+ backlight = <&lcd_bl>;
+ enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ label = "lcd";
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
+ lcd_bl: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 243 245 247 249 251 252 253 255>;
+ default-brightness-level = <8>;
+ pwms = <&ehrpwm1 0 50000 0>;
+ };
+};
+
+&ehrpwm1 {
+ status = "okay";
+};
+
+&epwmss1 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@5c {
+ compatible = "pixcir,pixcir_tangoc";
+ attb-gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x5c>;
+ reset-gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ touchscreen-size-x = <1024>;
+ touchscreen-size-y = <600>;
+ };
+};
+
+&uart8 {
+ status = "okay";
+};
+
+&dss {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dpi_out: endpoint {
+ data-lines = <24>;
+ remote-endpoint = <&lcd_in>;
+ };
+ };
+ };
+};
diff --git a/src/arm/ti/omap/am57xx-idk-common.dtsi b/src/arm/ti/omap/am57xx-idk-common.dtsi
new file mode 100644
index 0000000..43e3623
--- /dev/null
+++ b/src/arm/ti/omap/am57xx-idk-common.dtsi
@@ -0,0 +1,608 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "am57xx-industrial-grade.dtsi"
+
+/ {
+ aliases {
+ rtc0 = &tps659038_rtc;
+ rtc1 = &rtc;
+ display0 = &hdmi0;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ vmain: fixedregulator-vmain {
+ compatible = "regulator-fixed";
+ regulator-name = "VMAIN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ v3_3d: fixedregulator-v3_3d {
+ compatible = "regulator-fixed";
+ regulator-name = "V3_3D";
+ vin-supply = <&smps9_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ v1_2d: fixedregulator-v1_2d {
+ compatible = "regulator-fixed";
+ regulator-name = "V1_2D";
+ vin-supply = <&vmain>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vtt_fixed: fixedregulator-vtt {
+ /* TPS51200 */
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_fixed";
+ vin-supply = <&v3_3d>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ leds-iio {
+ status = "disabled";
+ compatible = "gpio-leds";
+ led-out0 {
+ label = "out0";
+ gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out1 {
+ label = "out1";
+ gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out2 {
+ label = "out2";
+ gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out3 {
+ label = "out3";
+ gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out4 {
+ label = "out4";
+ gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out5 {
+ label = "out5";
+ gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out6 {
+ label = "out6";
+ gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out7 {
+ label = "out7";
+ gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ hdmi0: connector@0 {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+
+ tpd12s015: encoder@0 {
+ compatible = "ti,tpd12s016", "ti,tpd12s015";
+
+ gpios = <0>, /* optional CT_CP_HPD */
+ <0>, /* optional LS_OE */
+ <&gpio7 12 GPIO_ACTIVE_HIGH>; /* HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint@0 {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint@0 {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ src_clk_x1: src_clk_x1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <20000000>;
+ };
+};
+
+&dra7_pmx_core {
+ dcan1_pins_default: dcan1-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+ DRA7XX_CORE_IOPAD(0x37d4, PIN_INPUT_PULLUP | MUX_MODE0) /* dcan1_rx */
+ >;
+ };
+
+ dcan1_pins_sleep: dcan1-sleep-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
+ DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP) /* dcan1_rx.off */
+ >;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps659038: tps659038@58 {
+ compatible = "ti,tps659038";
+ reg = <0x58>;
+ interrupts-extended = <&gpio6 16 IRQ_TYPE_LEVEL_HIGH
+ &dra7_pmx_core 0x418>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ ti,system-power-controller;
+ ti,palmas-override-powerhold;
+
+ tps659038_pmic {
+ compatible = "ti,tps659038-pmic";
+
+ smps12-in-supply = <&vmain>;
+ smps3-in-supply = <&vmain>;
+ smps45-in-supply = <&vmain>;
+ smps6-in-supply = <&vmain>;
+ smps7-in-supply = <&vmain>;
+ smps8-in-supply = <&vmain>;
+ smps9-in-supply = <&vmain>;
+ ldo1-in-supply = <&vmain>;
+ ldo2-in-supply = <&vmain>;
+ ldo3-in-supply = <&vmain>;
+ ldo4-in-supply = <&vmain>;
+ ldo9-in-supply = <&vmain>;
+ ldoln-in-supply = <&vmain>;
+ ldousb-in-supply = <&vmain>;
+ ldortc-in-supply = <&vmain>;
+
+ regulators {
+ smps12_reg: smps12 {
+ /* VDD_MPU */
+ regulator-name = "smps12";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps3_reg: smps3 {
+ /* VDD_DDR EMIF1 EMIF2 */
+ regulator-name = "smps3";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_DSPEVE on AM572 */
+ /* VDD_IVA + VDD_DSP on AM571 */
+ regulator-name = "smps45";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_GPU */
+ regulator-name = "smps6";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps7_reg: smps7 {
+ /* VDD_CORE */
+ regulator-name = "smps7";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ /* 5728 - VDD_IVAHD */
+ /* 5718 - N.C. test point */
+ regulator-name = "smps8";
+ };
+
+ smps9_reg: smps9 {
+ /* VDD_3_3D */
+ regulator-name = "smps9";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo1_reg: ldo1 {
+ /* VDDSHV8 - VSDMMC */
+ /* NOTE: on rev 1.3a, data supply */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VDDSH18V */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ /* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* LDO5-8 unused */
+
+ ldo9_reg: ldo9 {
+ /* VDD_RTC */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <840000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldortc_reg: ldortc {
+ /* VDDA_RTC */
+ regulator-name = "ldortc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ regen1: regen1 {
+ /* VDD_3V3_ON */
+ regulator-name = "regen1";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ regen2: regen2 {
+ /* Needed for PMIC internal resource */
+ regulator-name = "regen2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ tps659038_rtc: tps659038_rtc {
+ compatible = "ti,palmas-rtc";
+ interrupt-parent = <&tps659038>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ };
+
+ tps659038_pwr_button: tps659038_pwr_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps659038>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ ti,palmas-long-press-seconds = <12>;
+ };
+
+ tps659038_gpio: tps659038_gpio {
+ compatible = "ti,palmas-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ extcon_usb2: tps659038_usb {
+ compatible = "ti,palmas-usb-vid";
+ ti,enable-vbus-detection;
+ ti,enable-id-detection;
+ /* ID & VBUS GPIOs provided in board dts */
+ };
+ };
+
+ tpic2810: tpic2810@60 {
+ compatible = "ti,tpic2810";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ dsi_bridge: tc358778@e {
+ compatible = "toshiba,tc358778", "toshiba,tc358768";
+ reg = <0xe>;
+ status = "disabled";
+
+ clocks = <&src_clk_x1>;
+ clock-names = "refclk";
+
+ vddc-supply = <&v1_2d>;
+ vddmipi-supply = <&v1_2d>;
+ vddio-supply = <&v3_3d>;
+
+ dsi_bridge_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ rgb_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ data-lines = <24>;
+ };
+ };
+ };
+ };
+};
+
+&mcspi3 {
+ status = "okay";
+ ti,pindir-d0-out-d1-in;
+
+ sn65hvs882: sn65hvs882@0 {
+ compatible = "pisosr-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpol;
+ };
+};
+
+&uart3 {
+ status = "okay";
+ interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH
+ &dra7_pmx_core 0x248>;
+};
+
+&rtc {
+ status = "okay";
+ ext-clk-src;
+};
+
+&mac_sw {
+ status = "okay";
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-rxid";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii-rxid";
+ ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&omap_dwc3_2 {
+ extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+ extcon = <&extcon_usb2>;
+ dr_mode = "otg";
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&v3_3d>;
+ vqmmc-supply = <&ldo1_reg>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+ no-1-8-v;
+};
+
+&mmc2 {
+ status = "okay";
+ vmmc-supply = <&v3_3d>;
+ vqmmc-supply = <&v3_3d>;
+ bus-width = <8>;
+ non-removable;
+ max-frequency = <96000000>;
+ no-1-8-v;
+};
+
+&dcan1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep", "active";
+ pinctrl-0 = <&dcan1_pins_sleep>;
+ pinctrl-1 = <&dcan1_pins_sleep>;
+ pinctrl-2 = <&dcan1_pins_default>;
+};
+
+&qspi {
+ status = "okay";
+
+ spi-max-frequency = <76800000>;
+ flash@0 {
+ compatible = "s25fl256s1", "jedec,spi-nor";
+ spi-max-frequency = <76800000>;
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* MTD partition table.
+ * The ROM checks the first four physical blocks
+ * for a valid file to boot and the flash here is
+ * 64KiB block size.
+ */
+ partition@0 {
+ label = "QSPI.SPL";
+ reg = <0x00000000 0x00040000>;
+ };
+ partition@1 {
+ label = "QSPI.u-boot";
+ reg = <0x00040000 0x00100000>;
+ };
+ partition@2 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x00140000 0x00080000>;
+ };
+ partition@3 {
+ label = "QSPI.u-boot-env";
+ reg = <0x001c0000 0x00010000>;
+ };
+ partition@4 {
+ label = "QSPI.u-boot-env.backup1";
+ reg = <0x001d0000 0x0010000>;
+ };
+ partition@5 {
+ label = "QSPI.kernel";
+ reg = <0x001e0000 0x0800000>;
+ };
+ partition@6 {
+ label = "QSPI.file-system";
+ reg = <0x009e0000 0x01620000>;
+ };
+ };
+};
+
+&cpu0 {
+ vdd-supply = <&smps12_reg>;
+};
+
+&hdmi {
+ status = "okay";
+
+ vdda-supply = <&ldo4_reg>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
+
+&dss {
+ status = "okay";
+
+ vdda_video-supply = <&ldoln_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&rgb_in>;
+ data-lines = <24>;
+ };
+ };
+ };
+};
diff --git a/src/arm/ti/omap/am57xx-idk-lcd-osd101t2045.dtso b/src/arm/ti/omap/am57xx-idk-lcd-osd101t2045.dtso
new file mode 100644
index 0000000..25d74e9
--- /dev/null
+++ b/src/arm/ti/omap/am57xx-idk-lcd-osd101t2045.dtso
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ aliases {
+ display0 = "/display";
+ display1 = "/connector";
+ };
+
+ lcd_bl: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 1>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
+};
+
+&dsi_bridge {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lcd: display {
+ compatible = "osddisplays,osd101t2045-53ts";
+ reg = <0>;
+
+ label = "lcd";
+
+ backlight = <&lcd_bl>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
+
+&dsi_bridge_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ };
+ };
+};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&ecap0 {
+ status = "okay";
+};
diff --git a/src/arm/ti/omap/am57xx-idk-lcd-osd101t2587.dtso b/src/arm/ti/omap/am57xx-idk-lcd-osd101t2587.dtso
new file mode 100644
index 0000000..8cea7ba
--- /dev/null
+++ b/src/arm/ti/omap/am57xx-idk-lcd-osd101t2587.dtso
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&{/} {
+ aliases {
+ display0 = "/display";
+ display1 = "/connector";
+ };
+
+ lcd_bl: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 1>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
+};
+
+&dsi_bridge {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lcd: display {
+ compatible = "osddisplays,osd101t2587-53ts";
+ reg = <0>;
+
+ label = "lcd";
+
+ backlight = <&lcd_bl>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
+
+&dsi_bridge_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ };
+ };
+};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&ecap0 {
+ status = "okay";
+};
diff --git a/src/arm/ti/omap/am57xx-industrial-grade.dtsi b/src/arm/ti/omap/am57xx-industrial-grade.dtsi
new file mode 100644
index 0000000..422f953
--- /dev/null
+++ b/src/arm/ti/omap/am57xx-industrial-grade.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+&cpu_alert0 {
+ temperature = <90000>; /* milliCelsius */
+};
+
+&cpu_crit {
+ temperature = <105000>; /* milliCelsius */
+};
+
+&gpu_crit {
+ temperature = <105000>; /* milliCelsius */
+};
+
+&core_crit {
+ temperature = <105000>; /* milliCelsius */
+};
+
+&dspeve_crit {
+ temperature = <105000>; /* milliCelsius */
+};
+
+&iva_crit {
+ temperature = <105000>; /* milliCelsius */
+};
diff --git a/src/arm/ti/omap/am57xx-sbc-am57x.dts b/src/arm/ti/omap/am57xx-sbc-am57x.dts
new file mode 100644
index 0000000..363115a
--- /dev/null
+++ b/src/arm/ti/omap/am57xx-sbc-am57x.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for CompuLab SBC-AM57x single board computer
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ */
+
+#include "am57xx-cl-som-am57x.dts"
+#include "compulab-sb-som.dtsi"
+
+/ {
+ model = "CompuLab CL-SOM-AM57x on SB-SOM-AM57x";
+ compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+ aliases {
+ display0 = &lcd0;
+ display1 = &hdmi;
+ };
+};
+
+&dra7_pmx_core {
+ uart3_pins_default: uart3-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
+ DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
+ >;
+ };
+
+ mmc1_pins_default: mmc1-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1_sdcd.gpio6_27 */
+ DRA7XX_CORE_IOPAD(0x377c, PIN_INPUT | MUX_MODE14) /* mmc1_sdwp.gpio6_28 */
+ >;
+ };
+
+ usb1_pins: usb1-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+ >;
+ };
+
+ i2c5_pins_default: i2c5-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+ DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+ >;
+ };
+
+ lcd_pins_default: lcd-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3564, PIN_OUTPUT | MUX_MODE14) /* vin2a_vsync0.gpio4_0 */
+ >;
+ };
+
+ hdmi_pins: hdmi-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
+ DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
+ >;
+ };
+
+ hdmi_conn_pins: hdmi-conn-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT | MUX_MODE14) /* spi1_cs2.gpio7_12 */
+ >;
+ };
+};
+
+&uart3 {
+ status = "okay";
+ interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <&dra7_pmx_core 0x3f8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_default>;
+};
+
+&mmc1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+
+ vmmc-supply = <&ldo1_reg>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+};
+
+&i2c5 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins_default>;
+ clock-frequency = <400000>;
+
+ eeprom_base: atmel@54 {
+ compatible = "atmel,24c08";
+ reg = <0x54>;
+ pagesize = <16>;
+ };
+
+ pca9555: pca9555@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&dss {
+ status = "okay";
+
+ vdda_video-supply = <&ldoln_reg>;
+
+ port {
+ dpi_lcd_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&lcd0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins_default>;
+
+ enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
+ &gpio4 0 GPIO_ACTIVE_HIGH>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_lcd_out>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&hdmi {
+ status = "okay";
+ vdda-supply = <&ldo4_reg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ lanes = <1 0 3 2 5 4 7 6>;
+ };
+ };
+};
+
+&hdmi_conn {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_conn_pins>;
+
+ hpd-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/compulab-sb-som.dtsi b/src/arm/ti/omap/compulab-sb-som.dtsi
new file mode 100644
index 0000000..f5e6216
--- /dev/null
+++ b/src/arm/ti/omap/compulab-sb-som.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ */
+
+/ {
+ model = "CompuLab SB-SOM";
+ compatible = "compulab,sb-som";
+
+ vsb_3v3: fixedregulator-v3_3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vsb_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ enable-active-high;
+ };
+
+ lcd0: display {
+ compatible = "startek,startek-kd050c", "panel-dpi";
+ label = "lcd";
+
+ panel-timing {
+ clock-frequency = <33000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <43>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ vsync-len = <3>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+ hdmi_conn: connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+ };
+};
diff --git a/src/arm/ti/omap/dm3725.dtsi b/src/arm/ti/omap/dm3725.dtsi
new file mode 100644
index 0000000..d24e906
--- /dev/null
+++ b/src/arm/ti/omap/dm3725.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&sgx_module {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/dm8148-evm.dts b/src/arm/ti/omap/dm8148-evm.dts
new file mode 100644
index 0000000..ae8d9fa
--- /dev/null
+++ b/src/arm/ti/omap/dm8148-evm.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "dm814x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "DM8148 EVM";
+ compatible = "ti,dm8148-evm", "ti,dm8148", "ti,dm814";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ /* MIC94060YC6 controlled by SD1_POW pin */
+ vmmcsd_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&cpsw_emac0 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-id";
+};
+
+&cpsw_emac1 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii-id";
+};
+
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ linux,mtd-name = "micron,mt29f2g16aadwp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ti,nand-ecc-opt = "bch8";
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ partition@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+ partition@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1c0000>;
+ };
+ partition@1c0000 {
+ label = "Environment";
+ reg = <0x240000 0x40000>;
+ };
+ partition@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x500000>;
+ };
+ partition@780000 {
+ label = "Filesystem";
+ reg = <0x780000 0xf880000>;
+ };
+ };
+};
+
+&mmc1 {
+ status = "disabled";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_pins>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&pincntl {
+ sd1_pins: sd1-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */
+ DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */
+ DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[0] */
+ DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[1] */
+ DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[2] */
+ DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[3] */
+ DM814X_IOPAD(0x0924, PIN_OUTPUT | 0x40) /* SD1_POW */
+ DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP | 0x80) /* GP1[6] */
+ >;
+ };
+
+ usb0_pins: usb0-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */
+ >;
+ };
+
+ usb1_pins: usb1-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */
+ >;
+ };
+};
+
+&usb0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
+ dr_mode = "host";
+};
+
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+ dr_mode = "host";
+};
diff --git a/src/arm/ti/omap/dm8148-t410.dts b/src/arm/ti/omap/dm8148-t410.dts
new file mode 100644
index 0000000..f3e2ecf
--- /dev/null
+++ b/src/arm/ti/omap/dm8148-t410.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "dm814x.dtsi"
+
+/ {
+ model = "HP t410 Smart Zero Client";
+ compatible = "hp,t410", "ti,dm8148", "ti,dm814";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ /* gpio9 seems to control USB VBUS regulator and/or hub power */
+ usb_power: regulator@9 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ vmmcsd_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&cpsw_emac0 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-id";
+};
+
+&cpsw_emac1 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii-id";
+};
+
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&mmc1 {
+ status = "disabled";
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_pins>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ dmas = <&edma_xbar 8 0 1 /* use SDTXEVT1 instead of MCASP0TX */
+ &edma_xbar 9 0 2>; /* use SDRXEVT1 instead of MCASP0RX */
+ dma-names = "tx", "rx";
+ non-removable;
+};
+
+&pincntl {
+ sd2_pins: sd2-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x09c0, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[7] */
+ DM814X_IOPAD(0x09c4, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[6] */
+ DM814X_IOPAD(0x09c8, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[5] */
+ DM814X_IOPAD(0x09cc, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[4] */
+ DM814X_IOPAD(0x09d0, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[3] */
+ DM814X_IOPAD(0x09d4, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[2] */
+ DM814X_IOPAD(0x09d8, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[1] */
+ DM814X_IOPAD(0x09dc, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[0] */
+ DM814X_IOPAD(0x09e0, PIN_INPUT | 0x1) /* SD2_CLK */
+ DM814X_IOPAD(0x09f4, PIN_INPUT_PULLUP | 0x2) /* SD2_CMD */
+ DM814X_IOPAD(0x0920, PIN_INPUT | 0x40) /* SD2_SDCD */
+ >;
+ };
+
+ usb0_pins: usb0-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */
+ >;
+ };
+
+ usb1_pins: usb1-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */
+ >;
+ };
+};
+
+&usb0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
+ dr_mode = "host";
+};
+
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+ dr_mode = "host";
+};
diff --git a/src/arm/ti/omap/dm814x-clocks.dtsi b/src/arm/ti/omap/dm814x-clocks.dtsi
new file mode 100644
index 0000000..f7939f4
--- /dev/null
+++ b/src/arm/ti/omap/dm814x-clocks.dtsi
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+&pllss {
+ /*
+ * See TRM "2.6.10 Connected outputso DPLLS" and
+ * "2.6.11 Connected Outputs of DPLLJ". Only clkout is
+ * connected except for hdmi and usb.
+ */
+ adpll_mpu_ck: adpll@40 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-s-clock";
+ reg = <0x40 0x40>;
+ clocks = <&devosc_ck &devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow", "clkinphif";
+ clock-output-names = "481c5040.adpll.dcoclkldo",
+ "481c5040.adpll.clkout",
+ "481c5040.adpll.clkoutx2",
+ "481c5040.adpll.clkouthif";
+ };
+
+ adpll_dsp_ck: adpll@80 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x80 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5080.adpll.dcoclkldo",
+ "481c5080.adpll.clkout",
+ "481c5080.adpll.clkoutldo";
+ };
+
+ adpll_sgx_ck: adpll@b0 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0xb0 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c50b0.adpll.dcoclkldo",
+ "481c50b0.adpll.clkout",
+ "481c50b0.adpll.clkoutldo";
+ };
+
+ adpll_hdvic_ck: adpll@e0 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0xe0 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c50e0.adpll.dcoclkldo",
+ "481c50e0.adpll.clkout",
+ "481c50e0.adpll.clkoutldo";
+ };
+
+ adpll_l3_ck: adpll@110 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x110 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5110.adpll.dcoclkldo",
+ "481c5110.adpll.clkout",
+ "481c5110.adpll.clkoutldo";
+ };
+
+ adpll_isp_ck: adpll@140 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x140 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5140.adpll.dcoclkldo",
+ "481c5140.adpll.clkout",
+ "481c5140.adpll.clkoutldo";
+ };
+
+ adpll_dss_ck: adpll@170 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x170 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5170.adpll.dcoclkldo",
+ "481c5170.adpll.clkout",
+ "481c5170.adpll.clkoutldo";
+ };
+
+ adpll_video0_ck: adpll@1a0 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x1a0 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c51a0.adpll.dcoclkldo",
+ "481c51a0.adpll.clkout",
+ "481c51a0.adpll.clkoutldo";
+ };
+
+ adpll_video1_ck: adpll@1d0 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x1d0 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c51d0.adpll.dcoclkldo",
+ "481c51d0.adpll.clkout",
+ "481c51d0.adpll.clkoutldo";
+ };
+
+ adpll_hdmi_ck: adpll@200 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x200 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5200.adpll.dcoclkldo",
+ "481c5200.adpll.clkout",
+ "481c5200.adpll.clkoutldo";
+ };
+
+ adpll_audio_ck: adpll@230 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x230 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5230.adpll.dcoclkldo",
+ "481c5230.adpll.clkout",
+ "481c5230.adpll.clkoutldo";
+ };
+
+ adpll_usb_ck: adpll@260 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x260 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5260.adpll.dcoclkldo",
+ "481c5260.adpll.clkout",
+ "481c5260.adpll.clkoutldo";
+ };
+
+ adpll_ddr_ck: adpll@290 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x290 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5290.adpll.dcoclkldo",
+ "481c5290.adpll.clkout",
+ "481c5290.adpll.clkoutldo";
+ };
+};
+
+&pllss_clocks {
+ timer1_fck: timer1_fck@2e0 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+ &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+ ti,bit-shift = <3>;
+ reg = <0x2e0>;
+ };
+
+ timer2_fck: timer2_fck@2e0 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+ &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+ ti,bit-shift = <6>;
+ reg = <0x2e0>;
+ };
+
+ /* CPTS_RFT_CLK in RMII_REFCLK_SRC, usually sourced from auiod */
+ cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&adpll_video0_ck 1
+ &adpll_video1_ck 1
+ &adpll_audio_ck 1>;
+ ti,bit-shift = <1>;
+ reg = <0x2e8>;
+ };
+
+ /* REVISIT: Set up with a proper mux using RMII_REFCLK_SRC */
+ cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ };
+
+ sysclk18_ck: sysclk18_ck@2f0 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&rtcosc_ck>, <&rtcdivider_ck>;
+ ti,bit-shift = <0>;
+ reg = <0x02f0>;
+ };
+};
+
+&scm_clocks {
+ devosc_ck: devosc_ck@40 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&virt_20000000_ck>, <&virt_19200000_ck>;
+ ti,bit-shift = <21>;
+ reg = <0x0040>;
+ };
+
+ /* Optional auxosc, 20 - 30 MHz range, assume 22.5729 MHz by default */
+ auxosc_ck: auxosc_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <22572900>;
+ };
+
+ /* Optional 32768Hz crystal or clock on RTCOSC pins */
+ rtcosc_ck: rtcosc_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ /* Optional external clock on TCLKIN pin, set rate in baord dts file */
+ tclkin_ck: tclkin_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ virt_20000000_ck: virt_20000000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <20000000>;
+ };
+
+ virt_19200000_ck: virt_19200000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <19200000>;
+ };
+
+ mpu_ck: mpu_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <1000000000>;
+ };
+};
+
+&prcm_clocks {
+ osc_src_ck: osc_src_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&devosc_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ mpu_clksrc_ck: mpu_clksrc_ck@40 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&devosc_ck>, <&rtcdivider_ck>;
+ ti,bit-shift = <0>;
+ reg = <0x0040>;
+ };
+
+ /* Fixed divider clock 0.0016384 * devosc */
+ rtcdivider_ck: rtcdivider_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&devosc_ck>;
+ clock-mult = <128>;
+ clock-div = <78125>;
+ };
+
+ /* L4_HS 220 MHz*/
+ sysclk4_ck: sysclk4_ck {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&adpll_l3_ck 1>;
+ ti,clock-mult = <1>;
+ ti,clock-div = <1>;
+ };
+
+ /* L4_FWCFG */
+ sysclk5_ck: sysclk5_ck {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&adpll_l3_ck 1>;
+ ti,clock-mult = <1>;
+ ti,clock-div = <2>;
+ };
+
+ /* L4_LS 110 MHz */
+ sysclk6_ck: sysclk6_ck {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&adpll_l3_ck 1>;
+ ti,clock-mult = <1>;
+ ti,clock-div = <2>;
+ };
+
+ sysclk8_ck: sysclk8_ck {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&adpll_usb_ck 1>;
+ ti,clock-mult = <1>;
+ ti,clock-div = <1>;
+ };
+
+ sysclk10_ck: sysclk10_ck {
+ compatible = "ti,divider-clock";
+ reg = <0x324>;
+ ti,max-div = <7>;
+ #clock-cells = <0>;
+ clocks = <&adpll_usb_ck 1>;
+ };
+
+ aud_clkin0_ck: aud_clkin0_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <20000000>;
+ };
+
+ aud_clkin1_ck: aud_clkin1_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <20000000>;
+ };
+
+ aud_clkin2_ck: aud_clkin2_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <20000000>;
+ };
+};
+
+&prcm {
+ default_cm: default_cm@500 {
+ compatible = "ti,omap4-cm";
+ reg = <0x500 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x500 0x100>;
+
+ default_clkctrl: clk@0 {
+ compatible = "ti,clkctrl";
+ reg = <0x0 0x5c>;
+ #clock-cells = <2>;
+ };
+ };
+
+ alwon_cm: alwon_cm@1400 {
+ compatible = "ti,omap4-cm";
+ reg = <0x1400 0x300>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1400 0x300>;
+
+ alwon_clkctrl: clk@0 {
+ compatible = "ti,clkctrl";
+ reg = <0x0 0x228>;
+ #clock-cells = <2>;
+ };
+ };
+
+ alwon_ethernet_cm: alwon_ethernet_cm@15d4 {
+ compatible = "ti,omap4-cm";
+ reg = <0x15d4 0x4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x15d4 0x4>;
+
+ alwon_ethernet_clkctrl: clk@0 {
+ compatible = "ti,clkctrl";
+ reg = <0 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/dm814x.dtsi b/src/arm/ti/omap/dm814x.dtsi
new file mode 100644
index 0000000..a8cd724
--- /dev/null
+++ b/src/arm/ti/omap/dm814x.dtsi
@@ -0,0 +1,788 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/dm814.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/dm814x.h>
+
+/ {
+ compatible = "ti,dm814";
+ interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+
+ aliases {
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ ethernet0 = &cpsw_emac0;
+ ethernet1 = &cpsw_emac1;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ phy0 = &usb0_phy;
+ phy1 = &usb1_phy;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a8-pmu";
+ interrupts = <3>;
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is used for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+ };
+ };
+
+ ocp {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main";
+
+ usb: usb@47400000 {
+ compatible = "ti,am33xx-usb";
+ reg = <0x47400000 0x1000>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ti,hwmods = "usb_otg_hs";
+
+ usb0_phy: usb-phy@47401300 {
+ compatible = "ti,am335x-usb-phy";
+ reg = <0x47401300 0x100>;
+ reg-names = "phy";
+ ti,ctrl_mod = <&usb_ctrl_mod>;
+ #phy-cells = <0>;
+ };
+
+ usb0: usb@47401000 {
+ compatible = "ti,musb-am33xx";
+ reg = <0x47401400 0x400
+ 0x47401000 0x200>;
+ reg-names = "mc", "control";
+
+ interrupts = <18>;
+ interrupt-names = "mc";
+ dr_mode = "otg";
+ mentor,multipoint = <1>;
+ mentor,num-eps = <16>;
+ mentor,ram-bits = <12>;
+ mentor,power = <500>;
+ phys = <&usb0_phy>;
+
+ dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+ &cppi41dma 2 0 &cppi41dma 3 0
+ &cppi41dma 4 0 &cppi41dma 5 0
+ &cppi41dma 6 0 &cppi41dma 7 0
+ &cppi41dma 8 0 &cppi41dma 9 0
+ &cppi41dma 10 0 &cppi41dma 11 0
+ &cppi41dma 12 0 &cppi41dma 13 0
+ &cppi41dma 14 0 &cppi41dma 0 1
+ &cppi41dma 1 1 &cppi41dma 2 1
+ &cppi41dma 3 1 &cppi41dma 4 1
+ &cppi41dma 5 1 &cppi41dma 6 1
+ &cppi41dma 7 1 &cppi41dma 8 1
+ &cppi41dma 9 1 &cppi41dma 10 1
+ &cppi41dma 11 1 &cppi41dma 12 1
+ &cppi41dma 13 1 &cppi41dma 14 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+ "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+ "rx14", "rx15",
+ "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+ "tx14", "tx15";
+ };
+
+ usb1: usb@47401800 {
+ compatible = "ti,musb-am33xx";
+ reg = <0x47401c00 0x400
+ 0x47401800 0x200>;
+ reg-names = "mc", "control";
+ interrupts = <19>;
+ interrupt-names = "mc";
+ dr_mode = "otg";
+ mentor,multipoint = <1>;
+ mentor,num-eps = <16>;
+ mentor,ram-bits = <12>;
+ mentor,power = <500>;
+ phys = <&usb1_phy>;
+
+ dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+ &cppi41dma 17 0 &cppi41dma 18 0
+ &cppi41dma 19 0 &cppi41dma 20 0
+ &cppi41dma 21 0 &cppi41dma 22 0
+ &cppi41dma 23 0 &cppi41dma 24 0
+ &cppi41dma 25 0 &cppi41dma 26 0
+ &cppi41dma 27 0 &cppi41dma 28 0
+ &cppi41dma 29 0 &cppi41dma 15 1
+ &cppi41dma 16 1 &cppi41dma 17 1
+ &cppi41dma 18 1 &cppi41dma 19 1
+ &cppi41dma 20 1 &cppi41dma 21 1
+ &cppi41dma 22 1 &cppi41dma 23 1
+ &cppi41dma 24 1 &cppi41dma 25 1
+ &cppi41dma 26 1 &cppi41dma 27 1
+ &cppi41dma 28 1 &cppi41dma 29 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+ "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+ "rx14", "rx15",
+ "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+ "tx14", "tx15";
+ };
+
+ cppi41dma: dma-controller@47402000 {
+ compatible = "ti,am3359-cppi41";
+ reg = <0x47400000 0x1000
+ 0x47402000 0x1000
+ 0x47403000 0x1000
+ 0x47404000 0x4000>;
+ reg-names = "glue", "controller", "scheduler", "queuemgr";
+ interrupts = <17>;
+ interrupt-names = "glue";
+ #dma-cells = <2>;
+ /* For backwards compatibility: */
+ #dma-channels = <30>;
+ dma-channels = <30>;
+ #dma-requests = <256>;
+ dma-requests = <256>;
+ };
+ };
+
+ /*
+ * See TRM "Table 1-317. L4LS Instance Summary" for hints.
+ * It shows the module target agent registers though, so the
+ * actual device is typically 0x1000 before the target agent
+ * except in cases where the module is larger than 0x1000.
+ */
+ l4ls: l4ls@48000000 {
+ compatible = "ti,dm814-l4ls", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48000000 0x2000000>;
+
+ i2c1: i2c@28000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ reg = <0x28000 0x1000>;
+ interrupts = <70>;
+ };
+
+ elm: elm@80000 {
+ compatible = "ti,814-elm";
+ ti,hwmods = "elm";
+ reg = <0x80000 0x2000>;
+ interrupts = <4>;
+ };
+
+ gpio1: gpio@32000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio1";
+ ti,gpio-always-on;
+ reg = <0x32000 0x2000>;
+ interrupts = <96>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@4c000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio2";
+ ti,gpio-always-on;
+ reg = <0x4c000 0x2000>;
+ interrupts = <98>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@1ac000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio3";
+ ti,gpio-always-on;
+ reg = <0x1ac000 0x2000>;
+ interrupts = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@1ae000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio4";
+ ti,gpio-always-on;
+ reg = <0x1ae000 0x2000>;
+ interrupts = <62>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2c2: i2c@2a000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c2";
+ reg = <0x2a000 0x1000>;
+ interrupts = <71>;
+ };
+
+ mcspi1: spi@30000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x30000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <65>;
+ ti,spi-num-cs = <4>;
+ ti,hwmods = "mcspi1";
+ dmas = <&edma 16 0 &edma 17 0
+ &edma 18 0 &edma 19 0
+ &edma 20 0 &edma 21 0
+ &edma 22 0 &edma 23 0>;
+
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
+ };
+
+ mcspi2: spi@1a0000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x1a0000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <125>;
+ ti,spi-num-cs = <4>;
+ ti,hwmods = "mcspi2";
+ dmas = <&edma 42 0 &edma 43 0
+ &edma 44 0 &edma 45 0>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
+
+ /* Board must configure dmas with edma_xbar for EDMA */
+ mcspi3: spi@1a2000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x1a2000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <126>;
+ ti,spi-num-cs = <4>;
+ ti,hwmods = "mcspi3";
+ };
+
+ mcspi4: spi@1a4000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x1a4000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <127>;
+ ti,spi-num-cs = <4>;
+ ti,hwmods = "mcspi4";
+ };
+
+ timer1_target: target-module@2e000 {
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x2e000 0x4>,
+ <0x2e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ clocks = <&timer1_fck>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2e000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,am335x-timer-1ms";
+ reg = <0x0 0x400>;
+ interrupts = <67>;
+ ti,timer-alwon;
+ clocks = <&timer1_fck>;
+ clock-names = "fck";
+ };
+ };
+
+ uart1: serial@20000 {
+ compatible = "ti,am3352-uart", "ti,omap3-uart";
+ ti,hwmods = "uart1";
+ reg = <0x20000 0x2000>;
+ clock-frequency = <48000000>;
+ interrupts = <72>;
+ dmas = <&edma 26 0 &edma 27 0>;
+ dma-names = "tx", "rx";
+ };
+
+ uart2: serial@22000 {
+ compatible = "ti,am3352-uart", "ti,omap3-uart";
+ ti,hwmods = "uart2";
+ reg = <0x22000 0x2000>;
+ clock-frequency = <48000000>;
+ interrupts = <73>;
+ dmas = <&edma 28 0 &edma 29 0>;
+ dma-names = "tx", "rx";
+ };
+
+ uart3: serial@24000 {
+ compatible = "ti,am3352-uart", "ti,omap3-uart";
+ ti,hwmods = "uart3";
+ reg = <0x24000 0x2000>;
+ clock-frequency = <48000000>;
+ interrupts = <74>;
+ dmas = <&edma 30 0 &edma 31 0>;
+ dma-names = "tx", "rx";
+ };
+
+ timer2_target: target-module@40000 {
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x40000 0x4>,
+ <0x40010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ clocks = <&timer2_fck>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x40000 0x1000>;
+
+ timer2: timer@0 {
+ compatible = "ti,dm814-timer";
+ reg = <0 0x1000>;
+ interrupts = <68>;
+ clocks = <&timer2_fck>;
+ clock-names = "fck";
+ };
+ };
+
+ timer3: timer@42000 {
+ compatible = "ti,dm814-timer";
+ reg = <0x42000 0x2000>;
+ interrupts = <69>;
+ ti,hwmods = "timer3";
+ };
+
+ mmc1: mmc@60000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc1";
+ dmas = <&edma 24 0
+ &edma 25 0>;
+ dma-names = "tx", "rx";
+ interrupts = <64>;
+ interrupt-parent = <&intc>;
+ reg = <0x60000 0x1000>;
+ };
+
+ rtc: rtc@c0000 {
+ compatible = "ti,am3352-rtc", "ti,da830-rtc";
+ reg = <0xc0000 0x1000>;
+ interrupts = <75 76>;
+ ti,hwmods = "rtc";
+ };
+
+ mmc2: mmc@1d8000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc2";
+ dmas = <&edma 2 0
+ &edma 3 0>;
+ dma-names = "tx", "rx";
+ interrupts = <28>;
+ interrupt-parent = <&intc>;
+ reg = <0x1d8000 0x1000>;
+ };
+
+ control: control@140000 {
+ compatible = "ti,dm814-scm", "simple-bus";
+ reg = <0x140000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x140000 0x20000>;
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon", "simple-bus";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x800>;
+
+ phy_gmii_sel: phy-gmii-sel {
+ compatible = "ti,dm814-phy-gmii-sel";
+ reg = <0x650 0x4>;
+ #phy-cells = <1>;
+ };
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ scm_clockdomains: clockdomains {
+ };
+ };
+
+ usb_ctrl_mod: control@620 {
+ compatible = "ti,am335x-usb-ctrl-module";
+ reg = <0x620 0x10
+ 0x648 0x4>;
+ reg-names = "phy_ctrl", "wakeup";
+ };
+
+ edma_xbar: dma-router@f90 {
+ compatible = "ti,am335x-edma-crossbar";
+ reg = <0xf90 0x40>;
+ #dma-cells = <3>;
+ dma-requests = <32>;
+ dma-masters = <&edma>;
+ };
+
+ /*
+ * Note that silicon revision 2.1 and older
+ * require input enabled (bit 18 set) for all
+ * 3.3V I/Os to avoid cumulative hardware damage.
+ * For more info, see errata advisory 2.1.87.
+ * We leave bit 18 out of function-mask and rely
+ * on the bootloader for it.
+ */
+ pincntl: pinmux@800 {
+ compatible = "pinctrl-single";
+ reg = <0x800 0x438>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x307ff>;
+ };
+
+ usb1_phy: usb-phy@1b00 {
+ compatible = "ti,am335x-usb-phy";
+ reg = <0x1b00 0x100>;
+ reg-names = "phy";
+ ti,ctrl_mod = <&usb_ctrl_mod>;
+ #phy-cells = <0>;
+ };
+ };
+
+ prcm: prcm@180000 {
+ compatible = "ti,dm814-prcm", "simple-bus";
+ reg = <0x180000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x180000 0x2000>;
+
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prcm_clockdomains: clockdomains {
+ };
+ };
+
+ /* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */
+ pllss: pllss@1c5000 {
+ compatible = "ti,dm814-pllss", "simple-bus";
+ reg = <0x1c5000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1c5000 0x1000>;
+
+ pllss_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pllss_clockdomains: clockdomains {
+ };
+ };
+
+ wdt1: wdt@1c7000 {
+ compatible = "ti,omap3-wdt";
+ ti,hwmods = "wd_timer";
+ reg = <0x1c7000 0x1000>;
+ interrupts = <91>;
+ };
+ };
+
+ intc: interrupt-controller@48200000 {
+ compatible = "ti,dm814-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x48200000 0x1000>;
+ };
+
+ /* Board must configure evtmux with edma_xbar for EDMA */
+ mmc3: mmc@47810000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc3";
+ interrupts = <29>;
+ interrupt-parent = <&intc>;
+ reg = <0x47810000 0x1000>;
+ };
+
+ target-module@49000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49000000 0x4>;
+ reg-names = "rev";
+ clocks = <&alwon_clkctrl DM814_TPCC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49000000 0x10000>;
+
+ edma: dma@0 {
+ compatible = "ti,edma3-tpcc";
+ reg = <0 0x10000>;
+ reg-names = "edma3_cc";
+ interrupts = <12 13 14>;
+ interrupt-names = "edma3_ccint", "edma3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+ <&edma_tptc2 3>, <&edma_tptc3 0>;
+
+ ti,edma-memcpy-channels = <20 21>;
+ };
+ };
+
+ target-module@49800000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49800000 0x4>,
+ <0x49800010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&alwon_clkctrl DM814_TPTC0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49800000 0x100000>;
+
+ edma_tptc0: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <112>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@49900000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49900000 0x4>,
+ <0x49900010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&alwon_clkctrl DM814_TPTC1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49900000 0x100000>;
+
+ edma_tptc1: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <113>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@49a00000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49a00000 0x4>,
+ <0x49a00010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&alwon_clkctrl DM814_TPTC2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49a00000 0x100000>;
+
+ edma_tptc2: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <114>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@49b00000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49b00000 0x4>,
+ <0x49b00010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&alwon_clkctrl DM814_TPTC3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49b00000 0x100000>;
+
+ edma_tptc3: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <115>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ /* See TRM "Table 1-318. L4HS Instance Summary" */
+ l4hs: l4hs@4a000000 {
+ compatible = "ti,dm814-l4hs", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4a000000 0x1b4040>;
+
+ target-module@100000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x100900 0x4>,
+ <0x100908 0x4>,
+ <0x100904 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <0>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ ti,syss-mask = <1>;
+ clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x100000 0x8000>;
+
+ mac: ethernet@0 {
+ compatible = "ti,cpsw";
+ clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+ clock-names = "fck", "cpts";
+ cpdma_channels = <8>;
+ ale_entries = <1024>;
+ bd_ram_size = <0x2000>;
+ mac_control = <0x20>;
+ slaves = <2>;
+ active_slave = <0>;
+ cpts_clock_mult = <0x80000000>;
+ cpts_clock_shift = <29>;
+ reg = <0 0x800>,
+ <0x900 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * c0_rx_thresh_pend
+ * c0_rx_pend
+ * c0_tx_pend
+ * c0_misc_pend
+ */
+ interrupts = <40 41 42 43>;
+ ranges = <0 0 0x8000>;
+ syscon = <&scm_conf>;
+
+ davinci_mdio: mdio@800 {
+ compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
+ clocks = <&cpsw_125mhz_gclk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus_freq = <1000000>;
+ reg = <0x800 0x100>;
+ };
+
+ cpsw_emac0: slave@200 {
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1>;
+ };
+
+ cpsw_emac1: slave@300 {
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2>;
+ };
+ };
+ };
+ };
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ ti,hwmods = "gpmc";
+ ti,no-idle-on-init;
+ reg = <0x50000000 0x2000>;
+ interrupts = <100>;
+ gpmc,num-cs = <7>;
+ gpmc,num-waitpins = <2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+};
+
+#include "dm814x-clocks.dtsi"
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&timer1_fck>;
+ assigned-clock-parents = <&devosc_ck>;
+ };
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&timer2_fck>;
+ assigned-clock-parents = <&devosc_ck>;
+ };
+};
diff --git a/src/arm/ti/omap/dm8168-evm.dts b/src/arm/ti/omap/dm8168-evm.dts
new file mode 100644
index 0000000..1d80288
--- /dev/null
+++ b/src/arm/ti/omap/dm8168-evm.dts
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "dm816x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "DM8168 EVM";
+ compatible = "ti,dm8168-evm", "ti,dm8168", "ti,dm816";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000 /* 1 GB */
+ 0xc0000000 0x40000000>; /* 1 GB */
+ };
+
+ /* FDC6331L controlled by SD_POW pin */
+ vmmcsd_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ sata_refclk: fixedclock0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+};
+
+&dm816x_pinmux {
+ mcspi1_pins: mcspi1-pins {
+ pinctrl-single,pins = <
+ DM816X_IOPAD(0x0a94, MUX_MODE0) /* SPI_SCLK */
+ DM816X_IOPAD(0x0a98, MUX_MODE0) /* SPI_SCS0 */
+ DM816X_IOPAD(0x0aa8, MUX_MODE0) /* SPI_D0 */
+ DM816X_IOPAD(0x0aac, MUX_MODE0) /* SPI_D1 */
+ >;
+ };
+
+ mmc_pins: mmc-pins {
+ pinctrl-single,pins = <
+ DM816X_IOPAD(0x0a70, MUX_MODE0) /* SD_POW */
+ DM816X_IOPAD(0x0a74, MUX_MODE0) /* SD_CLK */
+ DM816X_IOPAD(0x0a78, MUX_MODE0) /* SD_CMD */
+ DM816X_IOPAD(0x0a7C, MUX_MODE0) /* SD_DAT0 */
+ DM816X_IOPAD(0x0a80, MUX_MODE0) /* SD_DAT1 */
+ DM816X_IOPAD(0x0a84, MUX_MODE0) /* SD_DAT2 */
+ DM816X_IOPAD(0x0a88, MUX_MODE0) /* SD_DAT2 */
+ DM816X_IOPAD(0x0a8c, MUX_MODE2) /* GP1[7] */
+ DM816X_IOPAD(0x0a90, MUX_MODE2) /* GP1[8] */
+ >;
+ };
+
+ usb0_pins: usb0-pins {
+ pinctrl-single,pins = <
+ DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB0_DRVVBUS */
+ >;
+ };
+
+ usb1_pins: usb1-pins {
+ pinctrl-single,pins = <
+ DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */
+ >;
+ };
+
+ nandflash_pins: nandflash-pins {
+ pinctrl-single,pins = <
+ DM816X_IOPAD(0x0b38, PULL_UP | MUX_MODE0) /* PINCTRL207 GPMC_CS0*/
+ DM816X_IOPAD(0x0b60, PULL_ENA | MUX_MODE0) /* PINCTRL217 GPMC_ADV_ALE */
+ DM816X_IOPAD(0x0b54, PULL_UP | PULL_ENA | MUX_MODE0) /* PINCTRL214 GPMC_OE_RE */
+ DM816X_IOPAD(0x0b58, PULL_ENA | MUX_MODE0) /* PINCTRL215 GPMC_BE0_CLE */
+ DM816X_IOPAD(0x0b50, PULL_UP | MUX_MODE0) /* PINCTRL213 GPMC_WE */
+ DM816X_IOPAD(0x0b6c, MUX_MODE0) /* PINCTRL220 GPMC_WAIT */
+ DM816X_IOPAD(0x0be4, PULL_ENA | MUX_MODE0) /* PINCTRL250 GPMC_CLK */
+ DM816X_IOPAD(0x0ba4, MUX_MODE0) /* PINCTRL234 GPMC_D0 */
+ DM816X_IOPAD(0x0ba8, MUX_MODE0) /* PINCTRL234 GPMC_D1 */
+ DM816X_IOPAD(0x0bac, MUX_MODE0) /* PINCTRL234 GPMC_D2 */
+ DM816X_IOPAD(0x0bb0, MUX_MODE0) /* PINCTRL234 GPMC_D3 */
+ DM816X_IOPAD(0x0bb4, MUX_MODE0) /* PINCTRL234 GPMC_D4 */
+ DM816X_IOPAD(0x0bb8, MUX_MODE0) /* PINCTRL234 GPMC_D5 */
+ DM816X_IOPAD(0x0bbc, MUX_MODE0) /* PINCTRL234 GPMC_D6 */
+ DM816X_IOPAD(0x0bc0, MUX_MODE0) /* PINCTRL234 GPMC_D7 */
+ DM816X_IOPAD(0x0bc4, MUX_MODE0) /* PINCTRL234 GPMC_D8 */
+ DM816X_IOPAD(0x0bc8, MUX_MODE0) /* PINCTRL234 GPMC_D9 */
+ DM816X_IOPAD(0x0bcc, MUX_MODE0) /* PINCTRL234 GPMC_D10 */
+ DM816X_IOPAD(0x0bd0, MUX_MODE0) /* PINCTRL234 GPMC_D11 */
+ DM816X_IOPAD(0x0bd4, MUX_MODE0) /* PINCTRL234 GPMC_D12 */
+ DM816X_IOPAD(0x0bd8, MUX_MODE0) /* PINCTRL234 GPMC_D13 */
+ DM816X_IOPAD(0x0bdc, MUX_MODE0) /* PINCTRL234 GPMC_D14 */
+ DM816X_IOPAD(0x0be0, MUX_MODE0) /* PINCTRL234 GPMC_D15 */
+ >;
+ };
+};
+
+&i2c1 {
+ extgpio0: pcf8575@20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&i2c2 {
+ extgpio1: pcf8575@20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins>;
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ linux,mtd-name = "micron,mt29f2g16aadwp";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ partition@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+ partition@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1c0000>;
+ };
+ partition@1c0000 {
+ label = "Environment";
+ reg = <0x240000 0x40000>;
+ };
+ partition@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x500000>;
+ };
+ partition@780000 {
+ label = "Filesystem";
+ reg = <0x780000 0xf880000>;
+ };
+ };
+};
+
+&mcspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi1_pins>;
+
+ flash@0 {
+ compatible = "w25x32";
+ spi-max-frequency = <48000000>;
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc_pins>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+};
+
+/* At least dm8168-evm rev c won't support multipoint, later may */
+&usb0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
+ mentor,multipoint = <0>;
+};
+
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+ mentor,multipoint = <0>;
+};
+
+&sata {
+ clocks = <&sysclk5_ck>, <&sata_refclk>;
+};
diff --git a/src/arm/ti/omap/dm816x-clocks.dtsi b/src/arm/ti/omap/dm816x-clocks.dtsi
new file mode 100644
index 0000000..338449b
--- /dev/null
+++ b/src/arm/ti/omap/dm816x-clocks.dtsi
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+&scrm {
+ main_fapll: main_fapll {
+ #clock-cells = <1>;
+ compatible = "ti,dm816-fapll-clock";
+ reg = <0x400 0x40>;
+ clocks = <&sys_clkin_ck &sys_clkin_ck>;
+ clock-indices = <1>, <2>, <3>, <4>, <5>,
+ <6>, <7>;
+ clock-output-names = "main_pll_clk1",
+ "main_pll_clk2",
+ "main_pll_clk3",
+ "main_pll_clk4",
+ "main_pll_clk5",
+ "main_pll_clk6",
+ "main_pll_clk7";
+ };
+
+ ddr_fapll: ddr_fapll {
+ #clock-cells = <1>;
+ compatible = "ti,dm816-fapll-clock";
+ reg = <0x440 0x30>;
+ clocks = <&sys_clkin_ck &sys_clkin_ck>;
+ clock-indices = <1>, <2>, <3>, <4>;
+ clock-output-names = "ddr_pll_clk1",
+ "ddr_pll_clk2",
+ "ddr_pll_clk3",
+ "ddr_pll_clk4";
+ };
+
+ video_fapll: video_fapll {
+ #clock-cells = <1>;
+ compatible = "ti,dm816-fapll-clock";
+ reg = <0x470 0x30>;
+ clocks = <&sys_clkin_ck &sys_clkin_ck>;
+ clock-indices = <1>, <2>, <3>;
+ clock-output-names = "video_pll_clk1",
+ "video_pll_clk2",
+ "video_pll_clk3";
+ };
+
+ audio_fapll: audio_fapll {
+ #clock-cells = <1>;
+ compatible = "ti,dm816-fapll-clock";
+ reg = <0x4a0 0x30>;
+ clocks = <&main_fapll 7>, < &sys_clkin_ck>;
+ clock-indices = <1>, <2>, <3>, <4>, <5>;
+ clock-output-names = "audio_pll_clk1",
+ "audio_pll_clk2",
+ "audio_pll_clk3",
+ "audio_pll_clk4",
+ "audio_pll_clk5";
+ };
+};
+
+&scrm_clocks {
+ secure_32k_ck: secure_32k_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ sys_32k_ck: sys_32k_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ tclkin_ck: tclkin_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ sys_clkin_ck: sys_clkin_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ };
+};
+
+/* 0x48180000 */
+&prcm_clocks {
+ clkout_pre_ck: clkout_pre_ck@100 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1
+ &audio_fapll 1>;
+ reg = <0x100>;
+ };
+
+ clkout_div_ck: clkout_div_ck@100 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&clkout_pre_ck>;
+ ti,bit-shift = <3>;
+ ti,max-div = <8>;
+ reg = <0x100>;
+ };
+
+ clkout_ck: clkout_ck@100 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&clkout_div_ck>;
+ ti,bit-shift = <7>;
+ reg = <0x100>;
+ };
+
+ /* CM_DPLL clocks p1795 */
+ sysclk1_ck: sysclk1_ck@300 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&main_fapll 1>;
+ ti,max-div = <7>;
+ reg = <0x0300>;
+ };
+
+ sysclk2_ck: sysclk2_ck@304 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&main_fapll 2>;
+ ti,max-div = <7>;
+ reg = <0x0304>;
+ };
+
+ sysclk3_ck: sysclk3_ck@308 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&main_fapll 3>;
+ ti,max-div = <7>;
+ reg = <0x0308>;
+ };
+
+ sysclk4_ck: sysclk4_ck@30c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&main_fapll 4>;
+ ti,max-div = <1>;
+ reg = <0x030c>;
+ };
+
+ sysclk5_ck: sysclk5_ck@310 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&sysclk4_ck>;
+ ti,max-div = <1>;
+ reg = <0x0310>;
+ };
+
+ sysclk6_ck: sysclk6_ck@314 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&main_fapll 4>;
+ ti,dividers = <2>, <4>;
+ reg = <0x0314>;
+ };
+
+ sysclk10_ck: sysclk10_ck@324 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&ddr_fapll 2>;
+ ti,max-div = <7>;
+ reg = <0x0324>;
+ };
+
+ sysclk24_ck: sysclk24_ck@3b4 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&main_fapll 5>;
+ ti,max-div = <7>;
+ reg = <0x03b4>;
+ };
+
+ mpu_ck: mpu_ck@15dc {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&sysclk2_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x15dc>;
+ };
+
+ audio_pll_a_ck: audio_pll_a_ck@35c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&audio_fapll 1>;
+ ti,max-div = <7>;
+ reg = <0x035c>;
+ };
+
+ sysclk18_ck: sysclk18_ck@378 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&sys_32k_ck>, <&audio_pll_a_ck>;
+ reg = <0x0378>;
+ };
+
+ timer1_fck: timer1_fck@390 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+ reg = <0x0390>;
+ };
+
+ timer2_fck: timer2_fck@394 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+ reg = <0x0394>;
+ };
+
+ timer3_fck: timer3_fck@398 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+ reg = <0x0398>;
+ };
+
+ timer4_fck: timer4_fck@39c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+ reg = <0x039c>;
+ };
+
+ timer5_fck: timer5_fck@3a0 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+ reg = <0x03a0>;
+ };
+
+ timer6_fck: timer6_fck@3a4 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+ reg = <0x03a4>;
+ };
+
+ timer7_fck: timer7_fck@3a8 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+ reg = <0x03a8>;
+ };
+};
+
+&prcm {
+ default_cm: default_cm@500 {
+ compatible = "ti,omap4-cm";
+ reg = <0x500 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x500 0x100>;
+
+ default_clkctrl: clk@0 {
+ compatible = "ti,clkctrl";
+ reg = <0x0 0x5c>;
+ #clock-cells = <2>;
+ };
+ };
+
+ alwon_cm: alwon_cm@1400 {
+ compatible = "ti,omap4-cm";
+ reg = <0x1400 0x300>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1400 0x300>;
+
+ alwon_clkctrl: clk@0 {
+ compatible = "ti,clkctrl";
+ reg = <0x0 0x208>;
+ #clock-cells = <2>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/dm816x.dtsi b/src/arm/ti/omap/dm816x.dtsi
new file mode 100644
index 0000000..b68686f
--- /dev/null
+++ b/src/arm/ti/omap/dm816x.dtsi
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/dm816.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+/ {
+ compatible = "ti,dm816";
+ interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+
+ aliases {
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ ethernet0 = ð0;
+ ethernet1 = ð1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a8-pmu";
+ interrupts = <3>;
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is used for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the dm816x interconnect.
+ * The real dm816x interconnect network is quite complex. Since
+ * it will not bring real advantage to represent that in DT
+ * for the moment, just use a fake OCP bus entry to represent
+ * the whole bus hierarchy.
+ */
+ ocp {
+ compatible = "simple-bus";
+ reg = <0x44000000 0x10000>;
+ interrupts = <9 10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ prcm: prcm@48180000 {
+ compatible = "ti,dm816-prcm", "simple-bus";
+ reg = <0x48180000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48180000 0x4000>;
+
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prcm_clockdomains: clockdomains {
+ };
+ };
+
+ scrm: scrm@48140000 {
+ compatible = "ti,dm816-scrm", "simple-bus";
+ reg = <0x48140000 0x21000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #pinctrl-cells = <1>;
+ ranges = <0 0x48140000 0x21000>;
+
+ dm816x_pinmux: pinmux@800 {
+ compatible = "pinctrl-single";
+ reg = <0x800 0x50a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xf>;
+ };
+
+ /* Device Configuration Registers */
+ scm_conf: syscon@600 {
+ compatible = "syscon", "simple-bus";
+ reg = <0x600 0x110>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x600 0x110>;
+
+ usb_phy0: usb-phy@20 {
+ compatible = "ti,dm8168-usb-phy";
+ reg = <0x20 0x8>;
+ reg-names = "phy";
+ clocks = <&main_fapll 6>;
+ clock-names = "refclk";
+ #phy-cells = <0>;
+ syscon = <&scm_conf>;
+ };
+
+ usb_phy1: usb-phy@28 {
+ compatible = "ti,dm8168-usb-phy";
+ reg = <0x28 0x8>;
+ reg-names = "phy";
+ clocks = <&main_fapll 6>;
+ clock-names = "refclk";
+ #phy-cells = <0>;
+ syscon = <&scm_conf>;
+ };
+ };
+
+ scrm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ scrm_clockdomains: clockdomains {
+ };
+ };
+
+ target-module@49000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49000000 0x4>;
+ reg-names = "rev";
+ clocks = <&alwon_clkctrl DM816_TPCC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49000000 0x10000>;
+
+ edma: dma@0 {
+ compatible = "ti,edma3-tpcc";
+ reg = <0 0x10000>;
+ reg-names = "edma3_cc";
+ interrupts = <12 13 14>;
+ interrupt-names = "edma3_ccint", "edma3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+ <&edma_tptc2 3>, <&edma_tptc3 0>;
+
+ ti,edma-memcpy-channels = <20 21>;
+ };
+ };
+
+ target-module@49800000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49800000 0x4>,
+ <0x49800010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&alwon_clkctrl DM816_TPTC0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49800000 0x100000>;
+
+ edma_tptc0: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <112>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@49900000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49900000 0x4>,
+ <0x49900010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&alwon_clkctrl DM816_TPTC1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49900000 0x100000>;
+
+ edma_tptc1: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <113>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@49a00000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49a00000 0x4>,
+ <0x49a00010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&alwon_clkctrl DM816_TPTC2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49a00000 0x100000>;
+
+ edma_tptc2: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <114>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@49b00000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49b00000 0x4>,
+ <0x49b00010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&alwon_clkctrl DM816_TPTC3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49b00000 0x100000>;
+
+ edma_tptc3: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <115>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ elm: elm@48080000 {
+ compatible = "ti,am3352-elm";
+ ti,hwmods = "elm";
+ reg = <0x48080000 0x2000>;
+ interrupts = <4>;
+ };
+
+ gpio1: gpio@48032000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio1";
+ ti,gpio-always-on;
+ reg = <0x48032000 0x1000>;
+ interrupts = <96>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@4804c000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio2";
+ ti,gpio-always-on;
+ reg = <0x4804c000 0x1000>;
+ interrupts = <98>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ ti,hwmods = "gpmc";
+ reg = <0x50000000 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupts = <100>;
+ dmas = <&edma 52 0>;
+ dma-names = "rxtx";
+ gpmc,num-cs = <6>;
+ gpmc,num-waitpins = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ i2c1: i2c@48028000 {
+ compatible = "ti,omap4-i2c";
+ ti,hwmods = "i2c1";
+ reg = <0x48028000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <70>;
+ };
+
+ i2c2: i2c@4802a000 {
+ compatible = "ti,omap4-i2c";
+ ti,hwmods = "i2c2";
+ reg = <0x4802a000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <71>;
+ };
+
+ intc: interrupt-controller@48200000 {
+ compatible = "ti,dm816-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x48200000 0x1000>;
+ };
+
+ rtc: rtc@480c0000 {
+ compatible = "ti,am3352-rtc", "ti,da830-rtc";
+ reg = <0x480c0000 0x1000>;
+ interrupts = <75 76>;
+ ti,hwmods = "rtc";
+ };
+
+ mailbox: mailbox@480c8000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x480c8000 0x2000>;
+ interrupts = <77>;
+ ti,hwmods = "mailbox";
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ mbox_dsp: mbox-dsp {
+ ti,mbox-tx = <3 0 0>;
+ ti,mbox-rx = <0 0 0>;
+ };
+ };
+
+ spinbox: spinbox@480ca000 {
+ compatible = "ti,omap4-hwspinlock";
+ reg = <0x480ca000 0x2000>;
+ ti,hwmods = "spinbox";
+ #hwlock-cells = <1>;
+ };
+
+ mdio: mdio@4a100800 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4a100800 0x100>;
+ ti,hwmods = "davinci_mdio";
+ bus_freq = <1000000>;
+ phy0: ethernet-phy@0 {
+ reg = <1>;
+ };
+ phy1: ethernet-phy@1 {
+ reg = <2>;
+ };
+ };
+
+ eth0: ethernet@4a100000 {
+ compatible = "ti,dm816-emac";
+ ti,hwmods = "emac0";
+ reg = <0x4a100000 0x800
+ 0x4a100900 0x3700>;
+ clocks = <&sysclk24_ck>;
+ syscon = <&scm_conf>;
+ ti,davinci-ctrl-reg-offset = <0>;
+ ti,davinci-ctrl-mod-reg-offset = <0x900>;
+ ti,davinci-ctrl-ram-offset = <0x2000>;
+ ti,davinci-ctrl-ram-size = <0x2000>;
+ interrupts = <40 41 42 43>;
+ phy-handle = <&phy0>;
+ };
+
+ eth1: ethernet@4a120000 {
+ compatible = "ti,dm816-emac";
+ ti,hwmods = "emac1";
+ reg = <0x4a120000 0x4000>;
+ clocks = <&sysclk24_ck>;
+ syscon = <&scm_conf>;
+ ti,davinci-ctrl-reg-offset = <0>;
+ ti,davinci-ctrl-mod-reg-offset = <0x900>;
+ ti,davinci-ctrl-ram-offset = <0x2000>;
+ ti,davinci-ctrl-ram-size = <0x2000>;
+ interrupts = <44 45 46 47>;
+ phy-handle = <&phy1>;
+ };
+
+ sata: sata@4a140000 {
+ compatible = "ti,dm816-ahci";
+ reg = <0x4a140000 0x10000>;
+ interrupts = <16>;
+ ti,hwmods = "sata";
+ };
+
+ mcspi1: spi@48030000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x48030000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <65>;
+ ti,spi-num-cs = <4>;
+ ti,hwmods = "mcspi1";
+ dmas = <&edma 16 0 &edma 17 0
+ &edma 18 0 &edma 19 0
+ &edma 20 0 &edma 21 0
+ &edma 22 0 &edma 23 0>;
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
+ };
+
+ mmc1: mmc@48060000 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x48060000 0x11000>;
+ ti,hwmods = "mmc1";
+ interrupts = <64>;
+ dmas = <&edma 24 0 &edma 25 0>;
+ dma-names = "tx", "rx";
+ };
+
+ timer1_target: target-module@4802e000 {
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x4802e000 0x4>,
+ <0x4802e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4802e000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,dm816-timer";
+ reg = <0 0x1000>;
+ interrupts = <67>;
+ ti,timer-alwon;
+ clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
+ clock-names = "fck";
+ };
+ };
+
+ timer2_target: target-module@48040000 {
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x48040000 0x4>,
+ <0x48040010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x48040000 0x1000>;
+
+ timer2: timer@0 {
+ compatible = "ti,dm816-timer";
+ reg = <0 0x1000>;
+ interrupts = <68>;
+ clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ };
+ };
+
+ timer3: timer@48042000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x48042000 0x2000>;
+ interrupts = <69>;
+ ti,hwmods = "timer3";
+ };
+
+ timer4: timer@48044000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x48044000 0x2000>;
+ interrupts = <92>;
+ ti,hwmods = "timer4";
+ ti,timer-pwm;
+ };
+
+ timer5: timer@48046000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x48046000 0x2000>;
+ interrupts = <93>;
+ ti,hwmods = "timer5";
+ ti,timer-pwm;
+ };
+
+ timer6: timer@48048000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x48048000 0x2000>;
+ interrupts = <94>;
+ ti,hwmods = "timer6";
+ ti,timer-pwm;
+ };
+
+ timer7: timer@4804a000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x4804a000 0x2000>;
+ interrupts = <95>;
+ ti,hwmods = "timer7";
+ ti,timer-pwm;
+ };
+
+ uart1: serial@48020000 {
+ compatible = "ti,am3352-uart", "ti,omap3-uart";
+ ti,hwmods = "uart1";
+ reg = <0x48020000 0x2000>;
+ clock-frequency = <48000000>;
+ interrupts = <72>;
+ dmas = <&edma 26 0 &edma 27 0>;
+ dma-names = "tx", "rx";
+ };
+
+ uart2: serial@48022000 {
+ compatible = "ti,am3352-uart", "ti,omap3-uart";
+ ti,hwmods = "uart2";
+ reg = <0x48022000 0x2000>;
+ clock-frequency = <48000000>;
+ interrupts = <73>;
+ dmas = <&edma 28 0 &edma 29 0>;
+ dma-names = "tx", "rx";
+ };
+
+ uart3: serial@48024000 {
+ compatible = "ti,am3352-uart", "ti,omap3-uart";
+ ti,hwmods = "uart3";
+ reg = <0x48024000 0x2000>;
+ clock-frequency = <48000000>;
+ interrupts = <74>;
+ dmas = <&edma 30 0 &edma 31 0>;
+ dma-names = "tx", "rx";
+ };
+
+ /* NOTE: USB needs a transceiver driver for phys to work */
+ usb: usb_otg_hs@47401000 {
+ compatible = "ti,am33xx-usb";
+ reg = <0x47401000 0x400000>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ti,hwmods = "usb_otg_hs";
+
+ usb0: usb@47401000 {
+ compatible = "ti,musb-dm816";
+ reg = <0x47401400 0x400
+ 0x47401000 0x200>;
+ reg-names = "mc", "control";
+ interrupts = <18>;
+ interrupt-names = "mc";
+ dr_mode = "host";
+ interface-type = <0>;
+ phys = <&usb_phy0>;
+ phy-names = "usb2-phy";
+ mentor,multipoint = <1>;
+ mentor,num-eps = <16>;
+ mentor,ram-bits = <12>;
+ mentor,power = <500>;
+
+ dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+ &cppi41dma 2 0 &cppi41dma 3 0
+ &cppi41dma 4 0 &cppi41dma 5 0
+ &cppi41dma 6 0 &cppi41dma 7 0
+ &cppi41dma 8 0 &cppi41dma 9 0
+ &cppi41dma 10 0 &cppi41dma 11 0
+ &cppi41dma 12 0 &cppi41dma 13 0
+ &cppi41dma 14 0 &cppi41dma 0 1
+ &cppi41dma 1 1 &cppi41dma 2 1
+ &cppi41dma 3 1 &cppi41dma 4 1
+ &cppi41dma 5 1 &cppi41dma 6 1
+ &cppi41dma 7 1 &cppi41dma 8 1
+ &cppi41dma 9 1 &cppi41dma 10 1
+ &cppi41dma 11 1 &cppi41dma 12 1
+ &cppi41dma 13 1 &cppi41dma 14 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+ "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+ "rx14", "rx15",
+ "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+ "tx14", "tx15";
+ };
+
+ usb1: usb@47401800 {
+ compatible = "ti,musb-dm816";
+ reg = <0x47401c00 0x400
+ 0x47401800 0x200>;
+ reg-names = "mc", "control";
+ interrupts = <19>;
+ interrupt-names = "mc";
+ dr_mode = "host";
+ interface-type = <0>;
+ phys = <&usb_phy1>;
+ phy-names = "usb2-phy";
+ mentor,multipoint = <1>;
+ mentor,num-eps = <16>;
+ mentor,ram-bits = <12>;
+ mentor,power = <500>;
+
+ dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+ &cppi41dma 17 0 &cppi41dma 18 0
+ &cppi41dma 19 0 &cppi41dma 20 0
+ &cppi41dma 21 0 &cppi41dma 22 0
+ &cppi41dma 23 0 &cppi41dma 24 0
+ &cppi41dma 25 0 &cppi41dma 26 0
+ &cppi41dma 27 0 &cppi41dma 28 0
+ &cppi41dma 29 0 &cppi41dma 15 1
+ &cppi41dma 16 1 &cppi41dma 17 1
+ &cppi41dma 18 1 &cppi41dma 19 1
+ &cppi41dma 20 1 &cppi41dma 21 1
+ &cppi41dma 22 1 &cppi41dma 23 1
+ &cppi41dma 24 1 &cppi41dma 25 1
+ &cppi41dma 26 1 &cppi41dma 27 1
+ &cppi41dma 28 1 &cppi41dma 29 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+ "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+ "rx14", "rx15",
+ "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+ "tx14", "tx15";
+ };
+
+ cppi41dma: dma-controller@47402000 {
+ compatible = "ti,am3359-cppi41";
+ reg = <0x47400000 0x1000
+ 0x47402000 0x1000
+ 0x47403000 0x1000
+ 0x47404000 0x4000>;
+ reg-names = "glue", "controller", "scheduler", "queuemgr";
+ interrupts = <17>;
+ interrupt-names = "glue";
+ #dma-cells = <2>;
+ /* For backwards compatibility: */
+ #dma-channels = <30>;
+ dma-channels = <30>;
+ #dma-requests = <256>;
+ dma-requests = <256>;
+ };
+ };
+
+ wd_timer2: wd_timer@480c2000 {
+ compatible = "ti,omap3-wdt";
+ ti,hwmods = "wd_timer";
+ reg = <0x480c2000 0x1000>;
+ interrupts = <0>;
+ };
+ };
+};
+
+#include "dm816x-clocks.dtsi"
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&timer1_fck>;
+ assigned-clock-parents = <&sys_clkin_ck>;
+ };
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&timer2_fck>;
+ assigned-clock-parents = <&sys_clkin_ck>;
+ };
+};
diff --git a/src/arm/ti/omap/dra62x-clocks.dtsi b/src/arm/ti/omap/dra62x-clocks.dtsi
new file mode 100644
index 0000000..11d1241
--- /dev/null
+++ b/src/arm/ti/omap/dra62x-clocks.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "dm814x-clocks.dtsi"
+
+/* Compared to dm814x, dra62x does not have hdic, l3 or dss PLLs */
+&adpll_hdvic_ck {
+ status = "disabled";
+};
+
+&adpll_l3_ck {
+ status = "disabled";
+};
+
+&adpll_dss_ck {
+ status = "disabled";
+};
+
+/* Compared to dm814x, dra62x has interconnect clocks on isp PLL */
+&sysclk4_ck {
+ clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk5_ck {
+ clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk6_ck {
+ clocks = <&adpll_isp_ck 1>;
+};
+
+/*
+ * Compared to dm814x, dra62x has different shifts and more mux options.
+ * Please add the extra options for ysclk_14 and 16 if really needed.
+ */
+&timer1_fck {
+ clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+ &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+ ti,bit-shift = <4>;
+};
+
+&timer2_fck {
+ clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+ &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+ ti,bit-shift = <8>;
+};
diff --git a/src/arm/ti/omap/dra62x-j5eco-evm.dts b/src/arm/ti/omap/dra62x-j5eco-evm.dts
new file mode 100644
index 0000000..2f6ac26
--- /dev/null
+++ b/src/arm/ti/omap/dra62x-j5eco-evm.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "dra62x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "DRA62x J5 Eco EVM";
+ compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148", "ti,dm814";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ /* MIC94060YC6 controlled by SD1_POW pin */
+ vmmcsd_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&cpsw_emac0 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-id";
+};
+
+&cpsw_emac1 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii-id";
+};
+
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ linux,mtd-name = "micron,mt29f2g16aadwp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ti,nand-ecc-opt = "bch8";
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ partition@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+ partition@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1c0000>;
+ };
+ partition@1c0000 {
+ label = "Environment";
+ reg = <0x240000 0x40000>;
+ };
+ partition@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x500000>;
+ };
+ partition@780000 {
+ label = "Filesystem";
+ reg = <0x780000 0xf880000>;
+ };
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_pins>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+};
+
+&pincntl {
+ sd1_pins: sd1-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */
+ DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */
+ DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[0] */
+ DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[1] */
+ DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[2] */
+ DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[3] */
+ DM814X_IOPAD(0x0924, PIN_OUTPUT | 0x40) /* SD1_POW */
+ DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP | 0x80) /* GP1[6] */
+ >;
+ };
+
+ usb0_pins: usb0-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */
+ >;
+ };
+};
+
+/* USB0_ID pin state: SW10[1] = 0 cable detection, SW10[1] = 1 ID grounded */
+&usb0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
+ dr_mode = "otg";
+};
+
+&usb1_phy {
+ status = "disabled";
+};
+
+&usb1 {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/dra62x.dtsi b/src/arm/ti/omap/dra62x.dtsi
new file mode 100644
index 0000000..cfefa67
--- /dev/null
+++ b/src/arm/ti/omap/dra62x.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "dm814x.dtsi"
+
+/ {
+ compatible = "ti,dra62x";
+};
+
+/* Compared to dm814x, dra62x has different offsets for Ethernet */
+&mac {
+ reg = <0 0x800>,
+ <0x1200 0x100>;
+};
+
+&davinci_mdio {
+ reg = <0x1000 0x100>;
+};
+
+#include "dra62x-clocks.dtsi"
diff --git a/src/arm/ti/omap/dra7-dspeve-thermal.dtsi b/src/arm/ti/omap/dra7-dspeve-thermal.dtsi
new file mode 100644
index 0000000..747ff0d
--- /dev/null
+++ b/src/arm/ti/omap/dra7-dspeve-thermal.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for DRA7x SoC DSPEVE thermal
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+dspeve_thermal: dspeve_thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <500>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&bandgap 3>;
+
+ trips {
+ dspeve_crit: dspeve_crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+};
diff --git a/src/arm/ti/omap/dra7-evm-common.dtsi b/src/arm/ti/omap/dra7-evm-common.dtsi
new file mode 100644
index 0000000..4cdffd6
--- /dev/null
+++ b/src/arm/ti/omap/dra7-evm-common.dtsi
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra74-ipu-dsp-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ti-dra7-atl.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ extcon_usb1: extcon_usb1 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ extcon_usb2: extcon_usb2 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ sound0: sound0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "DRA7xx-EVM";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line Out",
+ "Microphone", "Mic Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "MIC3L", "Mic Jack",
+ "MIC3R", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound0_master>;
+ simple-audio-card,frame-master = <&sound0_master>;
+ simple-audio-card,bitclock-inversion;
+
+ sound0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp3>;
+ system-clock-frequency = <5644800>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ clocks = <&atl_clkin2_ck>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led0 {
+ label = "dra7:usr1";
+ gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led1 {
+ label = "dra7:usr2";
+ gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "dra7:usr3";
+ gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "dra7:usr4";
+ gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ USER1 {
+ label = "btnUser1";
+ linux,code = <BTN_0>;
+ gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
+ };
+
+ USER2 {
+ label = "btnUser2";
+ linux,code = <BTN_1>;
+ gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&mcspi1 {
+ status = "okay";
+};
+
+&mcspi2 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+ interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <&dra7_pmx_core 0x3e0>;
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+
+ spi-max-frequency = <76800000>;
+ flash@0 {
+ compatible = "s25fl256s1";
+ spi-max-frequency = <76800000>;
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* MTD partition table.
+ * The ROM checks the first four physical blocks
+ * for a valid file to boot and the flash here is
+ * 64KiB block size.
+ */
+ partition@0 {
+ label = "QSPI.SPL";
+ reg = <0x00000000 0x00010000>;
+ };
+ partition@1 {
+ label = "QSPI.SPL.backup1";
+ reg = <0x00010000 0x00010000>;
+ };
+ partition@2 {
+ label = "QSPI.SPL.backup2";
+ reg = <0x00020000 0x00010000>;
+ };
+ partition@3 {
+ label = "QSPI.SPL.backup3";
+ reg = <0x00030000 0x00010000>;
+ };
+ partition@4 {
+ label = "QSPI.u-boot";
+ reg = <0x00040000 0x00100000>;
+ };
+ partition@5 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x00140000 0x00080000>;
+ };
+ partition@6 {
+ label = "QSPI.u-boot-env";
+ reg = <0x001c0000 0x00010000>;
+ };
+ partition@7 {
+ label = "QSPI.u-boot-env.backup1";
+ reg = <0x001d0000 0x0010000>;
+ };
+ partition@8 {
+ label = "QSPI.kernel";
+ reg = <0x001e0000 0x0800000>;
+ };
+ partition@9 {
+ label = "QSPI.file-system";
+ reg = <0x009e0000 0x01620000>;
+ };
+ };
+};
+
+&omap_dwc3_1 {
+ extcon = <&extcon_usb1>;
+};
+
+&usb1 {
+ dr_mode = "otg";
+ extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+ extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+ dr_mode = "host";
+ extcon = <&extcon_usb2>;
+};
+
+&atl {
+ assigned-clocks = <&abe_dpll_sys_clk_mux>,
+ <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>,
+ <&dpll_abe_ck>,
+ <&dpll_abe_m2x2_ck>,
+ <&atl_clkin2_ck>;
+ assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+ assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+ status = "okay";
+
+ atl2 {
+ bws = <DRA7_ATL_WS_MCASP2_FSX>;
+ aws = <DRA7_ATL_WS_MCASP3_FSX>;
+ };
+};
+
+&mcasp3 {
+ #sound-dai-cells = <0>;
+
+ assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+ assigned-clock-parents = <&atl_clkin2_ck>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializer */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+&pcie1_rc {
+ status = "okay";
+};
+
+&mmc4 {
+ bus-width = <4>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ non-removable;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wifi@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ };
+};
diff --git a/src/arm/ti/omap/dra7-evm.dts b/src/arm/ti/omap/dra7-evm.dts
new file mode 100644
index 0000000..46efbaa
--- /dev/null
+++ b/src/arm/ti/omap/dra7-evm.dts
@@ -0,0 +1,592 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include "dra7-evm-common.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+
+/ {
+ model = "TI DRA742";
+ compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
+ };
+
+ evm_12v0: fixedregulator-evm_12v0 {
+ /* main supply */
+ compatible = "regulator-fixed";
+ regulator-name = "evm_12v0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ vin-supply = <&smps9_reg>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ipu2_memory_region: ipu2-memory@95800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x95800000 0x0 0x3800000>;
+ reusable;
+ status = "okay";
+ };
+
+ dsp1_memory_region: dsp1-memory@99000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x99000000 0x0 0x4000000>;
+ reusable;
+ status = "okay";
+ };
+
+ ipu1_memory_region: ipu1-memory@9d000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x9d000000 0x0 0x2000000>;
+ reusable;
+ status = "okay";
+ };
+
+ dsp2_memory_region: dsp2-memory@9f000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x9f000000 0x0 0x800000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
+ evm_3v3_sd: fixedregulator-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ evm_3v3_sw: fixedregulator-evm_3v3_sw {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v3_sw";
+ vin-supply = <&sysen1>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aic_dvdd: fixedregulator-aic_dvdd {
+ /* TPS77018DBVT */
+ compatible = "regulator-fixed";
+ regulator-name = "aic_dvdd";
+ vin-supply = <&evm_3v3_sw>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vsys_3v3: fixedregulator-vsys3v3 {
+ /* Output of Cntlr A of TPS43351-Q1 on dra7-evm */
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&evm_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ evm_5v0: fixedregulator-evm_5v0 {
+ /* Output of Cntlr B of TPS43351-Q1 on dra7-evm */
+ compatible = "regulator-fixed";
+ regulator-name = "evm_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&evm_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ evm_3v6: fixedregulator-evm_3v6 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v6";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+ vin-supply = <&evm_5v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vmmcwl_fixed: fixedregulator-mmcwl {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcwl_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio5 8 0>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ vtt_fixed: fixedregulator-vtt {
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_fixed";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ vin-supply = <&sysen2>;
+ gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ };
+
+};
+
+&dra7_pmx_core {
+ dcan1_pins_default: dcan1-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+ DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
+ >;
+ };
+
+ dcan1_pins_sleep: dcan1-sleep-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
+ DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
+ >;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps659038: tps659038@58 {
+ compatible = "ti,tps659038";
+ reg = <0x58>;
+ ti,palmas-override-powerhold;
+ ti,system-power-controller;
+
+ tps659038_pmic {
+ compatible = "ti,tps659038-pmic";
+
+ regulators {
+ smps123_reg: smps123 {
+ /* VDD_MPU */
+ regulator-name = "smps123";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_DSPEVE */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_GPU - over VDD_SMPS6 */
+ regulator-name = "smps6";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps7_reg: smps7 {
+ /* CORE_VDD */
+ regulator-name = "smps7";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ /* VDD_IVAHD */
+ regulator-name = "smps8";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps9_reg: smps9 {
+ /* VDDS1V8 */
+ regulator-name = "smps9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo1_reg: ldo1 {
+ /* LDO1_OUT --> SDIO */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VDD_RTCIO */
+ /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDA_1V8_PHY */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ /* VDD_RTC */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-allow-bypass;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ /* REGEN1 is unused */
+
+ regen2: regen2 {
+ /* Needed for PMIC internal resources */
+ regulator-name = "regen2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* REGEN3 is unused */
+
+ sysen1: sysen1 {
+ /* PMIC_REGEN_3V3 */
+ regulator-name = "sysen1";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sysen2: sysen2 {
+ /* PMIC_REGEN_DDR */
+ regulator-name = "sysen2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ pcf_lcd: gpio@20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcf_gpio_21: gpio@21 {
+ compatible = "nxp,pcf8575";
+ reg = <0x21>;
+ lines-initial-states = <0x1408>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ tlv320aic3106: tlv320aic3106@19 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x19>;
+ adc-settle-ms = <40>;
+ ai3x-micbias-vg = <1>; /* 2.0V */
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&evm_3v3_sw>;
+ IOVDD-supply = <&evm_3v3_sw>;
+ DRVDD-supply = <&evm_3v3_sw>;
+ DVDD-supply = <&aic_dvdd>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pcf_hdmi: gpio@26 {
+ compatible = "nxp,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ hdmi-audio-hog {
+ /* vin6_sel_s0: high: VIN6, low: audio */
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "vin6_sel_s0";
+ };
+ };
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&evm_3v3_sd>;
+ vqmmc-supply = <&ldo1_reg>;
+ bus-width = <4>;
+ /*
+ * SDCD signal is not being used here - using the fact that GPIO mode
+ * is always hardwired.
+ */
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
+ pinctrl-7 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
+ pinctrl-8 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+};
+
+&mmc2 {
+ status = "okay";
+ vmmc-supply = <&evm_1v8_sw>;
+ vqmmc-supply = <&evm_1v8_sw>;
+ bus-width = <8>;
+ non-removable;
+ pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_1_8v_rev11 &mmc2_iodelay_ddr_1_8v_rev11_conf>;
+ pinctrl-3 = <&mmc2_pins_ddr_rev20>;
+ pinctrl-4 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev11_conf>;
+ pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+};
+
+&mmc4 {
+ status = "okay";
+ vmmc-supply = <&evm_3v6>;
+ vqmmc-supply = <&vmmcwl_fixed>;
+ pinctrl-names = "default-rev11", "default", "hs-rev11", "hs", "sdr12-rev11", "sdr12", "sdr25-rev11", "sdr25";
+ pinctrl-0 = <&mmc4_pins_default &mmc4_iodelay_ds_rev11_conf>;
+ pinctrl-1 = <&mmc4_pins_default &mmc4_iodelay_ds_rev20_conf>;
+ pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
+ pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
+ pinctrl-4 = <&mmc4_pins_sdr12 &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
+ pinctrl-5 = <&mmc4_pins_sdr12 &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
+ pinctrl-6 = <&mmc4_pins_sdr25 &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
+ pinctrl-7 = <&mmc4_pins_sdr25 &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
+};
+
+&cpu0 {
+ vdd-supply = <&smps123_reg>;
+};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ /*
+ * For the existing IOdelay configuration via U-Boot we don't
+ * support NAND on dra7-evm. Keep it disabled. Enabling it
+ * requires a different configuration by U-Boot.
+ */
+ status = "disabled";
+ ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* device IO registers */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+ ti,nand-xfer-type = "prefetch-dma";
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <80>;
+ gpmc,cs-wr-off-ns = <80>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <60>;
+ gpmc,adv-wr-off-ns = <60>;
+ gpmc,we-on-ns = <10>;
+ gpmc,we-off-ns = <50>;
+ gpmc,oe-on-ns = <4>;
+ gpmc,oe-off-ns = <40>;
+ gpmc,access-ns = <40>;
+ gpmc,wr-access-ns = <80>;
+ gpmc,rd-cycle-ns = <80>;
+ gpmc,wr-cycle-ns = <80>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ /* MTD partition table */
+ /* All SPL-* partitions are sized to minimal length
+ * which can be independently programmable. For
+ * NAND flash this is equal to size of erase-block */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "NAND.SPL";
+ reg = <0x00000000 0x00020000>;
+ };
+ partition@1 {
+ label = "NAND.SPL.backup1";
+ reg = <0x00020000 0x00020000>;
+ };
+ partition@2 {
+ label = "NAND.SPL.backup2";
+ reg = <0x00040000 0x00020000>;
+ };
+ partition@3 {
+ label = "NAND.SPL.backup3";
+ reg = <0x00060000 0x00020000>;
+ };
+ partition@4 {
+ label = "NAND.u-boot-spl-os";
+ reg = <0x00080000 0x00040000>;
+ };
+ partition@5 {
+ label = "NAND.u-boot";
+ reg = <0x000c0000 0x00100000>;
+ };
+ partition@6 {
+ label = "NAND.u-boot-env";
+ reg = <0x001c0000 0x00020000>;
+ };
+ partition@7 {
+ label = "NAND.u-boot-env.backup1";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@8 {
+ label = "NAND.kernel";
+ reg = <0x00200000 0x00800000>;
+ };
+ partition@9 {
+ label = "NAND.file-system";
+ reg = <0x00a00000 0x0f600000>;
+ };
+ };
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&gpio7_target {
+ ti,no-reset-on-init;
+ ti,no-idle-on-init;
+};
+
+&mac_sw {
+ status = "okay";
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii";
+ ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+ ethphy0: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy1: ethernet-phy@3 {
+ reg = <3>;
+ };
+};
+
+&dcan1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep", "active";
+ pinctrl-0 = <&dcan1_pins_sleep>;
+ pinctrl-1 = <&dcan1_pins_sleep>;
+ pinctrl-2 = <&dcan1_pins_default>;
+};
+
+&ipu2 {
+ status = "okay";
+ memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+ status = "okay";
+ memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+ status = "okay";
+ memory-region = <&dsp1_memory_region>;
+};
+
+&dsp2 {
+ status = "okay";
+ memory-region = <&dsp2_memory_region>;
+};
diff --git a/src/arm/ti/omap/dra7-ipu-dsp-common.dtsi b/src/arm/ti/omap/dra7-ipu-dsp-common.dtsi
new file mode 100644
index 0000000..a5bdc64
--- /dev/null
+++ b/src/arm/ti/omap/dra7-ipu-dsp-common.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common IPU and DSP data for TI DRA7xx/AM57xx platforms
+ */
+
+&mailbox5 {
+ status = "okay";
+ mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
+ status = "okay";
+ };
+ mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
+ status = "okay";
+ };
+};
+
+&mailbox6 {
+ status = "okay";
+ mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
+ status = "okay";
+ };
+};
+
+&ipu2 {
+ mboxes = <&mailbox6 &mbox_ipu2_ipc3x>;
+ ti,timers = <&timer3>;
+ ti,watchdog-timers = <&timer4>, <&timer9>;
+};
+
+&ipu1 {
+ mboxes = <&mailbox5 &mbox_ipu1_ipc3x>;
+ ti,timers = <&timer11>;
+ ti,watchdog-timers = <&timer7>, <&timer8>;
+};
+
+&dsp1 {
+ mboxes = <&mailbox5 &mbox_dsp1_ipc3x>;
+ ti,timers = <&timer5>;
+ ti,watchdog-timers = <&timer10>;
+};
diff --git a/src/arm/ti/omap/dra7-iva-thermal.dtsi b/src/arm/ti/omap/dra7-iva-thermal.dtsi
new file mode 100644
index 0000000..0a31313
--- /dev/null
+++ b/src/arm/ti/omap/dra7-iva-thermal.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for DRA7x SoC IVA thermal
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+iva_thermal: iva_thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <500>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&bandgap 4>;
+
+ trips {
+ iva_crit: iva_crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+};
diff --git a/src/arm/ti/omap/dra7-l4.dtsi b/src/arm/ti/omap/dra7-l4.dtsi
new file mode 100644
index 0000000..5733e3a
--- /dev/null
+++ b/src/arm/ti/omap/dra7-l4.dtsi
@@ -0,0 +1,4606 @@
+&l4_cfg { /* 0x4a000000 */
+ compatible = "ti,dra7-l4-cfg", "simple-pm-bus";
+ power-domains = <&prm_coreaon>;
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_L4_CFG_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x4a000000 0x800>,
+ <0x4a000800 0x800>,
+ <0x4a001000 0x1000>;
+ reg-names = "ap", "la", "ia0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4a000000 0x100000>, /* segment 0 */
+ <0x00100000 0x4a100000 0x100000>, /* segment 1 */
+ <0x00200000 0x4a200000 0x100000>; /* segment 2 */
+
+ segment@0 { /* 0x4a000000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00000800 0x00000800 0x000800>, /* ap 1 */
+ <0x00001000 0x00001000 0x001000>, /* ap 2 */
+ <0x00002000 0x00002000 0x002000>, /* ap 3 */
+ <0x00004000 0x00004000 0x001000>, /* ap 4 */
+ <0x00005000 0x00005000 0x001000>, /* ap 5 */
+ <0x00006000 0x00006000 0x001000>, /* ap 6 */
+ <0x00008000 0x00008000 0x002000>, /* ap 7 */
+ <0x0000a000 0x0000a000 0x001000>, /* ap 8 */
+ <0x00056000 0x00056000 0x001000>, /* ap 9 */
+ <0x00057000 0x00057000 0x001000>, /* ap 10 */
+ <0x0005e000 0x0005e000 0x002000>, /* ap 11 */
+ <0x00060000 0x00060000 0x001000>, /* ap 12 */
+ <0x00080000 0x00080000 0x008000>, /* ap 13 */
+ <0x00088000 0x00088000 0x001000>, /* ap 14 */
+ <0x000a0000 0x000a0000 0x008000>, /* ap 15 */
+ <0x000a8000 0x000a8000 0x001000>, /* ap 16 */
+ <0x000d9000 0x000d9000 0x001000>, /* ap 17 */
+ <0x000da000 0x000da000 0x001000>, /* ap 18 */
+ <0x000dd000 0x000dd000 0x001000>, /* ap 19 */
+ <0x000de000 0x000de000 0x001000>, /* ap 20 */
+ <0x000e0000 0x000e0000 0x001000>, /* ap 21 */
+ <0x000e1000 0x000e1000 0x001000>, /* ap 22 */
+ <0x000f4000 0x000f4000 0x001000>, /* ap 23 */
+ <0x000f5000 0x000f5000 0x001000>, /* ap 24 */
+ <0x000f6000 0x000f6000 0x001000>, /* ap 25 */
+ <0x000f7000 0x000f7000 0x001000>, /* ap 26 */
+ <0x00090000 0x00090000 0x008000>, /* ap 59 */
+ <0x00098000 0x00098000 0x001000>; /* ap 60 */
+
+ target-module@2000 { /* 0x4a002000, ap 3 08.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x2000 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2000 0x2000>;
+
+ scm: scm@0 {
+ compatible = "ti,dra7-scm-core", "simple-bus";
+ reg = <0 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x2000>;
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon", "simple-bus";
+ reg = <0x0 0x1400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x1400>;
+
+ pbias_regulator: pbias_regulator@e00 {
+ compatible = "ti,pbias-dra7", "ti,pbias-omap";
+ reg = <0xe00 0x4>;
+ syscon = <&scm_conf>;
+ pbias_mmc_reg: pbias_mmc_omap5 {
+ regulator-name = "pbias_mmc_omap5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+
+ phy_gmii_sel: phy-gmii-sel {
+ compatible = "ti,dra7xx-phy-gmii-sel";
+ reg = <0x554 0x4>;
+ #phy-cells = <1>;
+ };
+
+ scm_conf_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ dra7_pmx_core: pinmux@1400 {
+ compatible = "ti,dra7-padconf",
+ "pinctrl-single";
+ reg = <0x1400 0x0468>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x3fffffff>;
+ };
+
+ scm_conf1: scm_conf@1c04 {
+ compatible = "syscon";
+ reg = <0x1c04 0x0020>;
+ #syscon-cells = <2>;
+ };
+
+ scm_conf_pcie: scm_conf@1c24 {
+ compatible = "syscon";
+ reg = <0x1c24 0x0024>;
+ };
+
+ sdma_xbar: dma-router@b78 {
+ compatible = "ti,dra7-dma-crossbar";
+ reg = <0xb78 0xfc>;
+ #dma-cells = <1>;
+ dma-requests = <205>;
+ ti,dma-safe-map = <0>;
+ dma-masters = <&sdma>;
+ };
+
+ edma_xbar: dma-router@c78 {
+ compatible = "ti,dra7-dma-crossbar";
+ reg = <0xc78 0x7c>;
+ #dma-cells = <2>;
+ dma-requests = <204>;
+ ti,dma-safe-map = <0>;
+ dma-masters = <&edma>;
+ };
+ };
+ };
+
+ target-module@5000 { /* 0x4a005000, ap 5 10.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x5000 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5000 0x1000>;
+
+ cm_core_aon: cm_core_aon@0 {
+ compatible = "ti,dra7-cm-core-aon",
+ "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0x2000>;
+ ranges = <0 0 0x2000>;
+
+ cm_core_aon_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_core_aon_clockdomains: clockdomains {
+ };
+ };
+ };
+
+ target-module@8000 { /* 0x4a008000, ap 7 0e.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x8000 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8000 0x2000>;
+
+ cm_core: cm_core@0 {
+ compatible = "ti,dra7-cm-core", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0x3000>;
+ ranges = <0 0 0x3000>;
+
+ cm_core_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_core_clockdomains: clockdomains {
+ };
+ };
+ };
+
+ target-module@56000 { /* 0x4a056000, ap 9 02.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x56000 0x4>,
+ <0x5602c 0x4>,
+ <0x56028 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): core_pwrdm, dma_clkdm */
+ clocks = <&dma_clkctrl DRA7_DMA_DMA_SYSTEM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x56000 0x1000>;
+
+ sdma: dma-controller@0 {
+ compatible = "ti,omap4430-sdma", "ti,omap-sdma";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <32>;
+ dma-requests = <127>;
+ };
+ };
+
+ target-module@5e000 { /* 0x4a05e000, ap 11 1a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5e000 0x2000>;
+ };
+
+ target-module@80000 { /* 0x4a080000, ap 13 20.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x80000 0x4>,
+ <0x80010 0x4>,
+ <0x80014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+ clocks = <&l3init_clkctrl DRA7_L3INIT_OCP2SCP1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000 0x8000>;
+
+ ocp2scp@0 {
+ compatible = "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x8000>;
+ reg = <0x0 0x20>;
+
+ usb2_phy1: phy@4000 {
+ compatible = "ti,dra7x-usb2", "ti,omap-usb2";
+ reg = <0x4000 0x400>;
+ syscon-phy-power = <&scm_conf 0x300>;
+ clocks = <&usb_phy1_always_on_clk32k>,
+ <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
+ clock-names = "wkupclk",
+ "refclk";
+ #phy-cells = <0>;
+ };
+
+ usb2_phy2: phy@5000 {
+ compatible = "ti,dra7x-usb2-phy2",
+ "ti,omap-usb2";
+ reg = <0x5000 0x400>;
+ syscon-phy-power = <&scm_conf 0xe74>;
+ clocks = <&usb_phy2_always_on_clk32k>,
+ <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 8>;
+ clock-names = "wkupclk",
+ "refclk";
+ #phy-cells = <0>;
+ };
+
+ usb3_phy1: phy@4400 {
+ compatible = "ti,omap-usb3";
+ reg = <0x4400 0x80>,
+ <0x4800 0x64>,
+ <0x4c00 0x40>;
+ reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+ syscon-phy-power = <&scm_conf 0x370>;
+ clocks = <&usb_phy3_always_on_clk32k>,
+ <&sys_clkin1>,
+ <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
+ clock-names = "wkupclk",
+ "sysclk",
+ "refclk";
+ #phy-cells = <0>;
+ };
+ };
+ };
+
+ target-module@90000 { /* 0x4a090000, ap 59 42.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x90000 0x4>,
+ <0x90010 0x4>,
+ <0x90014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+ clocks = <&l3init_clkctrl DRA7_L3INIT_OCP2SCP3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x90000 0x8000>;
+
+ ocp2scp@0 {
+ compatible = "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x8000>;
+ reg = <0x0 0x20>;
+
+ pcie1_phy: pciephy@4000 {
+ compatible = "ti,phy-pipe3-pcie";
+ reg = <0x4000 0x80>, /* phy_rx */
+ <0x4400 0x64>; /* phy_tx */
+ reg-names = "phy_rx", "phy_tx";
+ syscon-phy-power = <&scm_conf_pcie 0x1c>;
+ syscon-pcs = <&scm_conf_pcie 0x10>;
+ clocks = <&dpll_pcie_ref_ck>,
+ <&dpll_pcie_ref_m2ldo_ck>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 8>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>,
+ <&optfclk_pciephy_div>,
+ <&sys_clkin1>;
+ clock-names = "dpll_ref", "dpll_ref_m2",
+ "wkupclk", "refclk",
+ "div-clk", "phy-div", "sysclk";
+ #phy-cells = <0>;
+ };
+
+ pcie2_phy: pciephy@5000 {
+ compatible = "ti,phy-pipe3-pcie";
+ reg = <0x5000 0x80>, /* phy_rx */
+ <0x5400 0x64>; /* phy_tx */
+ reg-names = "phy_rx", "phy_tx";
+ syscon-phy-power = <&scm_conf_pcie 0x20>;
+ syscon-pcs = <&scm_conf_pcie 0x10>;
+ clocks = <&dpll_pcie_ref_ck>,
+ <&dpll_pcie_ref_m2ldo_ck>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 8>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>,
+ <&optfclk_pciephy_div>,
+ <&sys_clkin1>;
+ clock-names = "dpll_ref", "dpll_ref_m2",
+ "wkupclk", "refclk",
+ "div-clk", "phy-div", "sysclk";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ sata_phy: phy@6000 {
+ compatible = "ti,phy-pipe3-sata";
+ reg = <0x6000 0x80>, /* phy_rx */
+ <0x6400 0x64>, /* phy_tx */
+ <0x6800 0x40>; /* pll_ctrl */
+ reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+ syscon-phy-power = <&scm_conf 0x374>;
+ clocks = <&sys_clkin1>,
+ <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
+ clock-names = "sysclk", "refclk";
+ syscon-pllreset = <&scm_conf 0x3fc>;
+ #phy-cells = <0>;
+ };
+ };
+ };
+
+ target-module@a0000 { /* 0x4a0a0000, ap 15 40.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa0000 0x8000>;
+ };
+
+ target-module@d9000 { /* 0x4a0d9000, ap 17 72.0 */
+ compatible = "ti,sysc-omap4-sr", "ti,sysc";
+ reg = <0xd9038 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): coreaon_pwrdm, coreaon_clkdm */
+ clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_MPU_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd9000 0x1000>;
+
+ /* SmartReflex child device marked reserved in TRM */
+ };
+
+ target-module@dd000 { /* 0x4a0dd000, ap 19 18.0 */
+ compatible = "ti,sysc-omap4-sr", "ti,sysc";
+ reg = <0xdd038 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): coreaon_pwrdm, coreaon_clkdm */
+ clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_CORE_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xdd000 0x1000>;
+
+ /* SmartReflex child device marked reserved in TRM */
+ };
+
+ target-module@e0000 { /* 0x4a0e0000, ap 21 28.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe0000 0x1000>;
+ };
+
+ target-module@f4000 { /* 0x4a0f4000, ap 23 04.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xf4000 0x4>,
+ <0xf4010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf4000 0x1000>;
+
+ mailbox1: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <3>;
+ ti,mbox-num-fifos = <8>;
+ status = "disabled";
+ };
+ };
+
+ target-module@f6000 { /* 0x4a0f6000, ap 25 78.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xf6000 0x4>,
+ <0xf6010 0x4>,
+ <0xf6014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_SPINLOCK_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf6000 0x1000>;
+
+ hwspinlock: spinlock@0 {
+ compatible = "ti,omap4-hwspinlock";
+ reg = <0x0 0x1000>;
+ #hwlock-cells = <1>;
+ };
+ };
+ };
+
+ segment@100000 { /* 0x4a100000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00002000 0x00102000 0x001000>, /* ap 27 */
+ <0x00003000 0x00103000 0x001000>, /* ap 28 */
+ <0x00008000 0x00108000 0x001000>, /* ap 29 */
+ <0x00009000 0x00109000 0x001000>, /* ap 30 */
+ <0x00040000 0x00140000 0x010000>, /* ap 31 */
+ <0x00050000 0x00150000 0x001000>, /* ap 32 */
+ <0x00051000 0x00151000 0x001000>, /* ap 33 */
+ <0x00052000 0x00152000 0x001000>, /* ap 34 */
+ <0x00053000 0x00153000 0x001000>, /* ap 35 */
+ <0x00054000 0x00154000 0x001000>, /* ap 36 */
+ <0x00055000 0x00155000 0x001000>, /* ap 37 */
+ <0x00056000 0x00156000 0x001000>, /* ap 38 */
+ <0x00057000 0x00157000 0x001000>, /* ap 39 */
+ <0x00058000 0x00158000 0x001000>, /* ap 40 */
+ <0x0005b000 0x0015b000 0x001000>, /* ap 41 */
+ <0x0005c000 0x0015c000 0x001000>, /* ap 42 */
+ <0x0005d000 0x0015d000 0x001000>, /* ap 45 */
+ <0x0005e000 0x0015e000 0x001000>, /* ap 46 */
+ <0x0005f000 0x0015f000 0x001000>, /* ap 47 */
+ <0x00060000 0x00160000 0x001000>, /* ap 48 */
+ <0x00061000 0x00161000 0x001000>, /* ap 49 */
+ <0x00062000 0x00162000 0x001000>, /* ap 50 */
+ <0x00063000 0x00163000 0x001000>, /* ap 51 */
+ <0x00064000 0x00164000 0x001000>, /* ap 52 */
+ <0x00065000 0x00165000 0x001000>, /* ap 53 */
+ <0x00066000 0x00166000 0x001000>, /* ap 54 */
+ <0x00067000 0x00167000 0x001000>, /* ap 55 */
+ <0x00068000 0x00168000 0x001000>, /* ap 56 */
+ <0x0006d000 0x0016d000 0x001000>, /* ap 57 */
+ <0x0006e000 0x0016e000 0x001000>, /* ap 58 */
+ <0x00071000 0x00171000 0x001000>, /* ap 61 */
+ <0x00072000 0x00172000 0x001000>, /* ap 62 */
+ <0x00073000 0x00173000 0x001000>, /* ap 63 */
+ <0x00074000 0x00174000 0x001000>, /* ap 64 */
+ <0x00075000 0x00175000 0x001000>, /* ap 65 */
+ <0x00076000 0x00176000 0x001000>, /* ap 66 */
+ <0x00077000 0x00177000 0x001000>, /* ap 67 */
+ <0x00078000 0x00178000 0x001000>, /* ap 68 */
+ <0x00081000 0x00181000 0x001000>, /* ap 69 */
+ <0x00082000 0x00182000 0x001000>, /* ap 70 */
+ <0x00083000 0x00183000 0x001000>, /* ap 71 */
+ <0x00084000 0x00184000 0x001000>, /* ap 72 */
+ <0x00085000 0x00185000 0x001000>, /* ap 73 */
+ <0x00086000 0x00186000 0x001000>, /* ap 74 */
+ <0x00087000 0x00187000 0x001000>, /* ap 75 */
+ <0x00088000 0x00188000 0x001000>, /* ap 76 */
+ <0x00069000 0x00169000 0x001000>, /* ap 103 */
+ <0x0006a000 0x0016a000 0x001000>, /* ap 104 */
+ <0x00079000 0x00179000 0x001000>, /* ap 105 */
+ <0x0007a000 0x0017a000 0x001000>, /* ap 106 */
+ <0x0006b000 0x0016b000 0x001000>, /* ap 107 */
+ <0x0006c000 0x0016c000 0x001000>, /* ap 108 */
+ <0x0007b000 0x0017b000 0x001000>, /* ap 121 */
+ <0x0007c000 0x0017c000 0x001000>, /* ap 122 */
+ <0x0007d000 0x0017d000 0x001000>, /* ap 123 */
+ <0x0007e000 0x0017e000 0x001000>, /* ap 124 */
+ <0x00059000 0x00159000 0x001000>, /* ap 125 */
+ <0x0005a000 0x0015a000 0x001000>; /* ap 126 */
+
+ target-module@2000 { /* 0x4a102000, ap 27 3c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2000 0x1000>;
+ };
+
+ target-module@8000 { /* 0x4a108000, ap 29 1e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8000 0x1000>;
+ };
+
+ target-module@40000 { /* 0x4a140000, ap 31 06.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x400fc 4>,
+ <0x41100 4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ power-domains = <&prm_l3init>;
+ clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 0>;
+ clock-names = "fck";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0x0 0x40000 0x10000>;
+
+ sata: sata@0 {
+ compatible = "snps,dwc-ahci";
+ reg = <0 0x1100>, <0x1100 0x8>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+ clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
+ ports-implemented = <0x1>;
+ };
+ };
+
+ target-module@51000 { /* 0x4a151000, ap 33 50.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x51000 0x1000>;
+ };
+
+ target-module@53000 { /* 0x4a153000, ap 35 54.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x53000 0x1000>;
+ };
+
+ target-module@55000 { /* 0x4a155000, ap 37 46.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x55000 0x1000>;
+ };
+
+ target-module@57000 { /* 0x4a157000, ap 39 58.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x57000 0x1000>;
+ };
+
+ target-module@59000 { /* 0x4a159000, ap 125 6a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x59000 0x1000>;
+ };
+
+ target-module@5b000 { /* 0x4a15b000, ap 41 60.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5b000 0x1000>;
+ };
+
+ target-module@5d000 { /* 0x4a15d000, ap 45 3a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5d000 0x1000>;
+ };
+
+ target-module@5f000 { /* 0x4a15f000, ap 47 56.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5f000 0x1000>;
+ };
+
+ target-module@61000 { /* 0x4a161000, ap 49 32.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x61000 0x1000>;
+ };
+
+ target-module@63000 { /* 0x4a163000, ap 51 5c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x63000 0x1000>;
+ };
+
+ target-module@65000 { /* 0x4a165000, ap 53 4e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x65000 0x1000>;
+ };
+
+ target-module@67000 { /* 0x4a167000, ap 55 5e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x67000 0x1000>;
+ };
+
+ target-module@69000 { /* 0x4a169000, ap 103 4a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x69000 0x1000>;
+ };
+
+ target-module@6b000 { /* 0x4a16b000, ap 107 52.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6b000 0x1000>;
+ };
+
+ target-module@6d000 { /* 0x4a16d000, ap 57 68.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6d000 0x1000>;
+ };
+
+ target-module@71000 { /* 0x4a171000, ap 61 48.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x71000 0x1000>;
+ };
+
+ target-module@73000 { /* 0x4a173000, ap 63 2a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x73000 0x1000>;
+ };
+
+ target-module@75000 { /* 0x4a175000, ap 65 64.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x75000 0x1000>;
+ };
+
+ target-module@77000 { /* 0x4a177000, ap 67 66.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x77000 0x1000>;
+ };
+
+ target-module@79000 { /* 0x4a179000, ap 105 34.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x79000 0x1000>;
+ };
+
+ target-module@7b000 { /* 0x4a17b000, ap 121 7c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7b000 0x1000>;
+ };
+
+ target-module@7d000 { /* 0x4a17d000, ap 123 7e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7d000 0x1000>;
+ };
+
+ target-module@81000 { /* 0x4a181000, ap 69 26.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x81000 0x1000>;
+ };
+
+ target-module@83000 { /* 0x4a183000, ap 71 2e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x83000 0x1000>;
+ };
+
+ target-module@85000 { /* 0x4a185000, ap 73 36.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x85000 0x1000>;
+ };
+
+ target-module@87000 { /* 0x4a187000, ap 75 74.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x87000 0x1000>;
+ };
+ };
+
+ segment@200000 { /* 0x4a200000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00018000 0x00218000 0x001000>, /* ap 43 */
+ <0x00019000 0x00219000 0x001000>, /* ap 44 */
+ <0x00000000 0x00200000 0x001000>, /* ap 77 */
+ <0x00001000 0x00201000 0x001000>, /* ap 78 */
+ <0x0000a000 0x0020a000 0x001000>, /* ap 79 */
+ <0x0000b000 0x0020b000 0x001000>, /* ap 80 */
+ <0x0000c000 0x0020c000 0x001000>, /* ap 81 */
+ <0x0000d000 0x0020d000 0x001000>, /* ap 82 */
+ <0x0000e000 0x0020e000 0x001000>, /* ap 83 */
+ <0x0000f000 0x0020f000 0x001000>, /* ap 84 */
+ <0x00010000 0x00210000 0x001000>, /* ap 85 */
+ <0x00011000 0x00211000 0x001000>, /* ap 86 */
+ <0x00012000 0x00212000 0x001000>, /* ap 87 */
+ <0x00013000 0x00213000 0x001000>, /* ap 88 */
+ <0x00014000 0x00214000 0x001000>, /* ap 89 */
+ <0x00015000 0x00215000 0x001000>, /* ap 90 */
+ <0x0002a000 0x0022a000 0x001000>, /* ap 91 */
+ <0x0002b000 0x0022b000 0x001000>, /* ap 92 */
+ <0x0001c000 0x0021c000 0x001000>, /* ap 93 */
+ <0x0001d000 0x0021d000 0x001000>, /* ap 94 */
+ <0x0001e000 0x0021e000 0x001000>, /* ap 95 */
+ <0x0001f000 0x0021f000 0x001000>, /* ap 96 */
+ <0x00020000 0x00220000 0x001000>, /* ap 97 */
+ <0x00021000 0x00221000 0x001000>, /* ap 98 */
+ <0x00024000 0x00224000 0x001000>, /* ap 99 */
+ <0x00025000 0x00225000 0x001000>, /* ap 100 */
+ <0x00026000 0x00226000 0x001000>, /* ap 101 */
+ <0x00027000 0x00227000 0x001000>, /* ap 102 */
+ <0x0002c000 0x0022c000 0x001000>, /* ap 109 */
+ <0x0002d000 0x0022d000 0x001000>, /* ap 110 */
+ <0x0002e000 0x0022e000 0x001000>, /* ap 111 */
+ <0x0002f000 0x0022f000 0x001000>, /* ap 112 */
+ <0x00030000 0x00230000 0x001000>, /* ap 113 */
+ <0x00031000 0x00231000 0x001000>, /* ap 114 */
+ <0x00032000 0x00232000 0x001000>, /* ap 115 */
+ <0x00033000 0x00233000 0x001000>, /* ap 116 */
+ <0x00034000 0x00234000 0x001000>, /* ap 117 */
+ <0x00035000 0x00235000 0x001000>, /* ap 118 */
+ <0x00036000 0x00236000 0x001000>, /* ap 119 */
+ <0x00037000 0x00237000 0x001000>, /* ap 120 */
+ <0x0001a000 0x0021a000 0x001000>, /* ap 127 */
+ <0x0001b000 0x0021b000 0x001000>; /* ap 128 */
+
+ target-module@0 { /* 0x4a200000, ap 77 3e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+ };
+
+ target-module@a000 { /* 0x4a20a000, ap 79 30.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa000 0x1000>;
+ };
+
+ target-module@c000 { /* 0x4a20c000, ap 81 0c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc000 0x1000>;
+ };
+
+ target-module@e000 { /* 0x4a20e000, ap 83 22.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe000 0x1000>;
+ };
+
+ target-module@10000 { /* 0x4a210000, ap 85 14.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000 0x1000>;
+ };
+
+ target-module@12000 { /* 0x4a212000, ap 87 16.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x12000 0x1000>;
+ };
+
+ target-module@14000 { /* 0x4a214000, ap 89 1c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x14000 0x1000>;
+ };
+
+ target-module@18000 { /* 0x4a218000, ap 43 12.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x18000 0x1000>;
+ };
+
+ target-module@1a000 { /* 0x4a21a000, ap 127 7a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1a000 0x1000>;
+ };
+
+ target-module@1c000 { /* 0x4a21c000, ap 93 38.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1c000 0x1000>;
+ };
+
+ target-module@1e000 { /* 0x4a21e000, ap 95 0a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e000 0x1000>;
+ };
+
+ target-module@20000 { /* 0x4a220000, ap 97 24.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x20000 0x1000>;
+ };
+
+ target-module@24000 { /* 0x4a224000, ap 99 44.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x24000 0x1000>;
+ };
+
+ target-module@26000 { /* 0x4a226000, ap 101 2c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x1000>;
+ };
+
+ target-module@2a000 { /* 0x4a22a000, ap 91 4c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2a000 0x1000>;
+ };
+
+ target-module@2c000 { /* 0x4a22c000, ap 109 6c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2c000 0x1000>;
+ };
+
+ target-module@2e000 { /* 0x4a22e000, ap 111 6e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2e000 0x1000>;
+ };
+
+ target-module@30000 { /* 0x4a230000, ap 113 70.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x30000 0x1000>;
+ };
+
+ target-module@32000 { /* 0x4a232000, ap 115 5a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x32000 0x1000>;
+ };
+
+ target-module@34000 { /* 0x4a234000, ap 117 76.1 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x34000 0x1000>;
+ };
+
+ target-module@36000 { /* 0x4a236000, ap 119 62.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x36000 0x1000>;
+ };
+ };
+};
+
+&l4_per1 { /* 0x48000000 */
+ compatible = "ti,dra7-l4-per1", "simple-pm-bus";
+ power-domains = <&prm_l4per>;
+ clocks = <&l4per_clkctrl DRA7_L4PER_L4_PER1_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x48000000 0x800>,
+ <0x48000800 0x800>,
+ <0x48001000 0x400>,
+ <0x48001400 0x400>,
+ <0x48001800 0x400>,
+ <0x48001c00 0x400>;
+ reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */
+ <0x00200000 0x48200000 0x200000>; /* segment 1 */
+
+ segment@0 { /* 0x48000000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00001000 0x00001000 0x000400>, /* ap 1 */
+ <0x00000800 0x00000800 0x000800>, /* ap 2 */
+ <0x00020000 0x00020000 0x001000>, /* ap 3 */
+ <0x00021000 0x00021000 0x001000>, /* ap 4 */
+ <0x00032000 0x00032000 0x001000>, /* ap 5 */
+ <0x00033000 0x00033000 0x001000>, /* ap 6 */
+ <0x00034000 0x00034000 0x001000>, /* ap 7 */
+ <0x00035000 0x00035000 0x001000>, /* ap 8 */
+ <0x00036000 0x00036000 0x001000>, /* ap 9 */
+ <0x00037000 0x00037000 0x001000>, /* ap 10 */
+ <0x0003e000 0x0003e000 0x001000>, /* ap 11 */
+ <0x0003f000 0x0003f000 0x001000>, /* ap 12 */
+ <0x00055000 0x00055000 0x001000>, /* ap 13 */
+ <0x00056000 0x00056000 0x001000>, /* ap 14 */
+ <0x00057000 0x00057000 0x001000>, /* ap 15 */
+ <0x00058000 0x00058000 0x001000>, /* ap 16 */
+ <0x00059000 0x00059000 0x001000>, /* ap 17 */
+ <0x0005a000 0x0005a000 0x001000>, /* ap 18 */
+ <0x0005b000 0x0005b000 0x001000>, /* ap 19 */
+ <0x0005c000 0x0005c000 0x001000>, /* ap 20 */
+ <0x0005d000 0x0005d000 0x001000>, /* ap 21 */
+ <0x0005e000 0x0005e000 0x001000>, /* ap 22 */
+ <0x00060000 0x00060000 0x001000>, /* ap 23 */
+ <0x0006a000 0x0006a000 0x001000>, /* ap 24 */
+ <0x0006b000 0x0006b000 0x001000>, /* ap 25 */
+ <0x0006c000 0x0006c000 0x001000>, /* ap 26 */
+ <0x0006d000 0x0006d000 0x001000>, /* ap 27 */
+ <0x0006e000 0x0006e000 0x001000>, /* ap 28 */
+ <0x0006f000 0x0006f000 0x001000>, /* ap 29 */
+ <0x00070000 0x00070000 0x001000>, /* ap 30 */
+ <0x00071000 0x00071000 0x001000>, /* ap 31 */
+ <0x00072000 0x00072000 0x001000>, /* ap 32 */
+ <0x00073000 0x00073000 0x001000>, /* ap 33 */
+ <0x00061000 0x00061000 0x001000>, /* ap 34 */
+ <0x00053000 0x00053000 0x001000>, /* ap 35 */
+ <0x00054000 0x00054000 0x001000>, /* ap 36 */
+ <0x000b2000 0x000b2000 0x001000>, /* ap 37 */
+ <0x000b3000 0x000b3000 0x001000>, /* ap 38 */
+ <0x00078000 0x00078000 0x001000>, /* ap 39 */
+ <0x00079000 0x00079000 0x001000>, /* ap 40 */
+ <0x00086000 0x00086000 0x001000>, /* ap 41 */
+ <0x00087000 0x00087000 0x001000>, /* ap 42 */
+ <0x00088000 0x00088000 0x001000>, /* ap 43 */
+ <0x00089000 0x00089000 0x001000>, /* ap 44 */
+ <0x00051000 0x00051000 0x001000>, /* ap 45 */
+ <0x00052000 0x00052000 0x001000>, /* ap 46 */
+ <0x00098000 0x00098000 0x001000>, /* ap 47 */
+ <0x00099000 0x00099000 0x001000>, /* ap 48 */
+ <0x0009a000 0x0009a000 0x001000>, /* ap 49 */
+ <0x0009b000 0x0009b000 0x001000>, /* ap 50 */
+ <0x0009c000 0x0009c000 0x001000>, /* ap 51 */
+ <0x0009d000 0x0009d000 0x001000>, /* ap 52 */
+ <0x00068000 0x00068000 0x001000>, /* ap 53 */
+ <0x00069000 0x00069000 0x001000>, /* ap 54 */
+ <0x00090000 0x00090000 0x002000>, /* ap 55 */
+ <0x00092000 0x00092000 0x001000>, /* ap 56 */
+ <0x000a4000 0x000a4000 0x001000>, /* ap 57 */
+ <0x000a6000 0x000a6000 0x001000>, /* ap 58 */
+ <0x000a8000 0x000a8000 0x004000>, /* ap 59 */
+ <0x000ac000 0x000ac000 0x001000>, /* ap 60 */
+ <0x000ad000 0x000ad000 0x001000>, /* ap 61 */
+ <0x000ae000 0x000ae000 0x001000>, /* ap 62 */
+ <0x00066000 0x00066000 0x001000>, /* ap 63 */
+ <0x00067000 0x00067000 0x001000>, /* ap 64 */
+ <0x000b4000 0x000b4000 0x001000>, /* ap 65 */
+ <0x000b5000 0x000b5000 0x001000>, /* ap 66 */
+ <0x000b8000 0x000b8000 0x001000>, /* ap 67 */
+ <0x000b9000 0x000b9000 0x001000>, /* ap 68 */
+ <0x000ba000 0x000ba000 0x001000>, /* ap 69 */
+ <0x000bb000 0x000bb000 0x001000>, /* ap 70 */
+ <0x000d1000 0x000d1000 0x001000>, /* ap 71 */
+ <0x000d2000 0x000d2000 0x001000>, /* ap 72 */
+ <0x000d5000 0x000d5000 0x001000>, /* ap 73 */
+ <0x000d6000 0x000d6000 0x001000>, /* ap 74 */
+ <0x000a2000 0x000a2000 0x001000>, /* ap 75 */
+ <0x000a3000 0x000a3000 0x001000>, /* ap 76 */
+ <0x00001400 0x00001400 0x000400>, /* ap 77 */
+ <0x00001800 0x00001800 0x000400>, /* ap 78 */
+ <0x00001c00 0x00001c00 0x000400>, /* ap 79 */
+ <0x000a5000 0x000a5000 0x001000>, /* ap 80 */
+ <0x0007a000 0x0007a000 0x001000>, /* ap 81 */
+ <0x0007b000 0x0007b000 0x001000>, /* ap 82 */
+ <0x0007c000 0x0007c000 0x001000>, /* ap 83 */
+ <0x0007d000 0x0007d000 0x001000>; /* ap 84 */
+
+ target-module@20000 { /* 0x48020000, ap 3 04.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x20050 0x4>,
+ <0x20054 0x4>,
+ <0x20058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_UART3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x20000 0x1000>;
+
+ uart3: serial@0 {
+ compatible = "ti,dra742-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ status = "disabled";
+ dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@32000 { /* 0x48032000, ap 5 3e.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x32000 0x4>,
+ <0x32010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x32000 0x1000>;
+
+ timer2: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ timer3_target: target-module@34000 { /* 0x48034000, ap 7 46.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x34000 0x4>,
+ <0x34010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x34000 0x1000>;
+
+ timer3: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ timer4_target: target-module@36000 { /* 0x48036000, ap 9 4e.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x36000 0x4>,
+ <0x36010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x36000 0x1000>;
+
+ timer4: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@3e000 { /* 0x4803e000, ap 11 56.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x3e000 0x4>,
+ <0x3e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3e000 0x1000>;
+
+ timer9: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio7_target: target-module@51000 { /* 0x48051000, ap 45 2e.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x51000 0x4>,
+ <0x51010 0x4>,
+ <0x51114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_GPIO7_CLKCTRL 0>,
+ <&l4per_clkctrl DRA7_L4PER_GPIO7_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x51000 0x1000>;
+
+ gpio7: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@53000 { /* 0x48053000, ap 35 36.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x53000 0x4>,
+ <0x53010 0x4>,
+ <0x53114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_GPIO8_CLKCTRL 0>,
+ <&l4per_clkctrl DRA7_L4PER_GPIO8_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x53000 0x1000>;
+
+ gpio8: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ gpio2_target: target-module@55000 { /* 0x48055000, ap 13 0e.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55000 0x4>,
+ <0x55010 0x4>,
+ <0x55114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_GPIO2_CLKCTRL 0>,
+ <&l4per_clkctrl DRA7_L4PER_GPIO2_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x55000 0x1000>;
+
+ gpio2: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ gpio3_target: target-module@57000 { /* 0x48057000, ap 15 06.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x57000 0x4>,
+ <0x57010 0x4>,
+ <0x57114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_GPIO3_CLKCTRL 0>,
+ <&l4per_clkctrl DRA7_L4PER_GPIO3_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x57000 0x1000>;
+
+ gpio3: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@59000 { /* 0x48059000, ap 17 16.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x59000 0x4>,
+ <0x59010 0x4>,
+ <0x59114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_GPIO4_CLKCTRL 0>,
+ <&l4per_clkctrl DRA7_L4PER_GPIO4_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x59000 0x1000>;
+
+ gpio4: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@5b000 { /* 0x4805b000, ap 19 1e.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x5b000 0x4>,
+ <0x5b010 0x4>,
+ <0x5b114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_GPIO5_CLKCTRL 0>,
+ <&l4per_clkctrl DRA7_L4PER_GPIO5_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5b000 0x1000>;
+
+ gpio5: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@5d000 { /* 0x4805d000, ap 21 26.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x5d000 0x4>,
+ <0x5d010 0x4>,
+ <0x5d114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_GPIO6_CLKCTRL 0>,
+ <&l4per_clkctrl DRA7_L4PER_GPIO6_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5d000 0x1000>;
+
+ gpio6: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@60000 { /* 0x48060000, ap 23 32.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x60000 0x8>,
+ <0x60010 0x8>,
+ <0x60090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_I2C3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x60000 0x1000>;
+
+ i2c3: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ target-module@66000 { /* 0x48066000, ap 63 14.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x66050 0x4>,
+ <0x66054 0x4>,
+ <0x66058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_UART5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x66000 0x1000>;
+
+ uart5: serial@0 {
+ compatible = "ti,dra742-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ status = "disabled";
+ dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@68000 { /* 0x48068000, ap 53 1c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x68050 0x4>,
+ <0x68054 0x4>,
+ <0x68058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+ clocks = <&ipu_clkctrl DRA7_IPU_UART6_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x68000 0x1000>;
+
+ uart6: serial@0 {
+ compatible = "ti,dra742-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ status = "disabled";
+ dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@6a000 { /* 0x4806a000, ap 24 24.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x6a050 0x4>,
+ <0x6a054 0x4>,
+ <0x6a058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_UART1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6a000 0x1000>;
+
+ uart1: serial@0 {
+ compatible = "ti,dra742-uart";
+ reg = <0x0 0x100>;
+ interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ status = "disabled";
+ dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@6c000 { /* 0x4806c000, ap 26 2c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x6c050 0x4>,
+ <0x6c054 0x4>,
+ <0x6c058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_UART2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6c000 0x1000>;
+
+ uart2: serial@0 {
+ compatible = "ti,dra742-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ status = "disabled";
+ dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@6e000 { /* 0x4806e000, ap 28 0c.1 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x6e050 0x4>,
+ <0x6e054 0x4>,
+ <0x6e058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_UART4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6e000 0x1000>;
+
+ uart4: serial@0 {
+ compatible = "ti,dra742-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ status = "disabled";
+ dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@70000 { /* 0x48070000, ap 30 22.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x70000 0x8>,
+ <0x70010 0x8>,
+ <0x70090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_I2C1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x70000 0x1000>;
+
+ i2c1: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ target-module@72000 { /* 0x48072000, ap 32 2a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x72000 0x8>,
+ <0x72010 0x8>,
+ <0x72090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_I2C2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x72000 0x1000>;
+
+ i2c2: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ target-module@78000 { /* 0x48078000, ap 39 0a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x78000 0x4>,
+ <0x78010 0x4>,
+ <0x78014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_ELM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x78000 0x1000>;
+
+ elm: elm@0 {
+ compatible = "ti,am3352-elm";
+ reg = <0x0 0xfc0>; /* device IO registers */
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@7a000 { /* 0x4807a000, ap 81 3a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x7a000 0x8>,
+ <0x7a010 0x8>,
+ <0x7a090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_I2C4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7a000 0x1000>;
+
+ i2c4: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ target-module@7c000 { /* 0x4807c000, ap 83 4a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x7c000 0x8>,
+ <0x7c010 0x8>,
+ <0x7c090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+ clocks = <&ipu_clkctrl DRA7_IPU_I2C5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7c000 0x1000>;
+
+ i2c5: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ target-module@86000 { /* 0x48086000, ap 41 5e.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x86000 0x4>,
+ <0x86010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x86000 0x1000>;
+
+ timer10: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@88000 { /* 0x48088000, ap 43 66.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x88000 0x4>,
+ <0x88010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x88000 0x1000>;
+
+ timer11: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@90000 { /* 0x48090000, ap 55 12.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x91fe0 0x4>,
+ <0x91fe4 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl DRA7_L4SEC_RNG_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x90000 0x2000>;
+
+ rng: rng@0 {
+ compatible = "ti,omap4-rng";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+ };
+
+ target-module@98000 { /* 0x48098000, ap 47 08.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x98000 0x4>,
+ <0x98010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x98000 0x1000>;
+
+ mcspi1: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,spi-num-cs = <4>;
+ dmas = <&sdma_xbar 35>,
+ <&sdma_xbar 36>,
+ <&sdma_xbar 37>,
+ <&sdma_xbar 38>,
+ <&sdma_xbar 39>,
+ <&sdma_xbar 40>,
+ <&sdma_xbar 41>,
+ <&sdma_xbar 42>;
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
+ status = "disabled";
+ };
+ };
+
+ target-module@9a000 { /* 0x4809a000, ap 49 10.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x9a000 0x4>,
+ <0x9a010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x9a000 0x1000>;
+
+ mcspi2: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,spi-num-cs = <2>;
+ dmas = <&sdma_xbar 43>,
+ <&sdma_xbar 44>,
+ <&sdma_xbar 45>,
+ <&sdma_xbar 46>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ status = "disabled";
+ };
+ };
+
+ target-module@9c000 { /* 0x4809c000, ap 51 38.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x9c000 0x4>,
+ <0x9c010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+ clocks = <&l3init_clkctrl DRA7_L3INIT_MMC1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x9c000 0x1000>;
+
+ mmc1: mmc@0 {
+ compatible = "ti,dra7-sdhci";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ pbias-supply = <&pbias_mmc_reg>;
+ max-frequency = <192000000>;
+ mmc-ddr-1_8v;
+ mmc-ddr-3_3v;
+ };
+ };
+
+ target-module@a2000 { /* 0x480a2000, ap 75 02.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa2000 0x1000>;
+ };
+
+ target-module@a4000 { /* 0x480a4000, ap 57 42.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x000a4000 0x00001000>,
+ <0x00001000 0x000a5000 0x00001000>;
+ };
+
+ des_target: target-module@a5000 { /* 0x480a5000 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xa5030 0x4>,
+ <0xa5034 0x4>,
+ <0xa5038 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl DRA7_L4SEC_DES_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xa5000 0x00001000>;
+
+ des: des@0 {
+ compatible = "ti,omap4-des";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+ };
+
+ target-module@a8000 { /* 0x480a8000, ap 59 1a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa8000 0x4000>;
+ };
+
+ target-module@ad000 { /* 0x480ad000, ap 61 20.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xad000 0x4>,
+ <0xad010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_MMC3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xad000 0x1000>;
+
+ mmc3: mmc@0 {
+ compatible = "ti,dra7-sdhci";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ /* Errata i887 limits max-frequency of MMC3 to 64 MHz */
+ max-frequency = <64000000>;
+ /* SDMA is not supported */
+ sdhci-caps-mask = <0x0 0x400000>;
+ };
+ };
+
+ target-module@b2000 { /* 0x480b2000, ap 37 52.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xb2000 0x4>,
+ <0xb2014 0x4>,
+ <0xb2018 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ ti,no-reset-on-init;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_HDQ1W_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb2000 0x1000>;
+
+ hdqw1w: 1w@0 {
+ compatible = "ti,omap3-1w";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@b4000 { /* 0x480b4000, ap 65 40.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xb4000 0x4>,
+ <0xb4010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+ clocks = <&l3init_clkctrl DRA7_L3INIT_MMC2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb4000 0x1000>;
+
+ mmc2: mmc@0 {
+ compatible = "ti,dra7-sdhci";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ max-frequency = <192000000>;
+ /* SDR104/DDR50/SDR50 bits in CAPA2 is not supported */
+ sdhci-caps-mask = <0x7 0x0>;
+ mmc-hs200-1_8v;
+ mmc-ddr-1_8v;
+ mmc-ddr-3_3v;
+ };
+ };
+
+ target-module@b8000 { /* 0x480b8000, ap 67 48.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xb8000 0x4>,
+ <0xb8010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb8000 0x1000>;
+
+ mcspi3: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,spi-num-cs = <2>;
+ dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
+ dma-names = "tx0", "rx0";
+ status = "disabled";
+ };
+ };
+
+ target-module@ba000 { /* 0x480ba000, ap 69 18.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xba000 0x4>,
+ <0xba010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xba000 0x1000>;
+
+ mcspi4: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,spi-num-cs = <1>;
+ dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
+ dma-names = "tx0", "rx0";
+ status = "disabled";
+ };
+ };
+
+ target-module@d1000 { /* 0x480d1000, ap 71 28.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xd1000 0x4>,
+ <0xd1010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl DRA7_L4PER_MMC4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd1000 0x1000>;
+
+ mmc4: mmc@0 {
+ compatible = "ti,dra7-sdhci";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ max-frequency = <192000000>;
+ /* SDMA is not supported */
+ sdhci-caps-mask = <0x0 0x400000>;
+ };
+ };
+
+ target-module@d5000 { /* 0x480d5000, ap 73 30.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd5000 0x1000>;
+ };
+ };
+
+ segment@200000 { /* 0x48200000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&l4_per2 { /* 0x48400000 */
+ compatible = "ti,dra7-l4-per2", "simple-pm-bus";
+ power-domains = <&prm_l4per>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_L4_PER2_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x48400000 0x800>,
+ <0x48400800 0x800>,
+ <0x48401000 0x400>,
+ <0x48401400 0x400>,
+ <0x48401800 0x400>;
+ reg-names = "ap", "la", "ia0", "ia1", "ia2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x48400000 0x400000>, /* segment 0 */
+ <0x45800000 0x45800000 0x400000>, /* L3 data port */
+ <0x45c00000 0x45c00000 0x400000>, /* L3 data port */
+ <0x46000000 0x46000000 0x400000>, /* L3 data port */
+ <0x48436000 0x48436000 0x400000>, /* L3 data port */
+ <0x4843a000 0x4843a000 0x400000>, /* L3 data port */
+ <0x4844c000 0x4844c000 0x400000>, /* L3 data port */
+ <0x48450000 0x48450000 0x400000>, /* L3 data port */
+ <0x48454000 0x48454000 0x400000>; /* L3 data port */
+
+ segment@0 { /* 0x48400000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00001000 0x00001000 0x000400>, /* ap 1 */
+ <0x00000800 0x00000800 0x000800>, /* ap 2 */
+ <0x00084000 0x00084000 0x004000>, /* ap 3 */
+ <0x00001400 0x00001400 0x000400>, /* ap 4 */
+ <0x00001800 0x00001800 0x000400>, /* ap 5 */
+ <0x00088000 0x00088000 0x001000>, /* ap 6 */
+ <0x0002c000 0x0002c000 0x001000>, /* ap 7 */
+ <0x0002d000 0x0002d000 0x001000>, /* ap 8 */
+ <0x00060000 0x00060000 0x002000>, /* ap 9 */
+ <0x00062000 0x00062000 0x001000>, /* ap 10 */
+ <0x00064000 0x00064000 0x002000>, /* ap 11 */
+ <0x00066000 0x00066000 0x001000>, /* ap 12 */
+ <0x00068000 0x00068000 0x002000>, /* ap 13 */
+ <0x0006a000 0x0006a000 0x001000>, /* ap 14 */
+ <0x0006c000 0x0006c000 0x002000>, /* ap 15 */
+ <0x0006e000 0x0006e000 0x001000>, /* ap 16 */
+ <0x00036000 0x00036000 0x001000>, /* ap 17 */
+ <0x00037000 0x00037000 0x001000>, /* ap 18 */
+ <0x00070000 0x00070000 0x002000>, /* ap 19 */
+ <0x00072000 0x00072000 0x001000>, /* ap 20 */
+ <0x0003a000 0x0003a000 0x001000>, /* ap 21 */
+ <0x0003b000 0x0003b000 0x001000>, /* ap 22 */
+ <0x0003c000 0x0003c000 0x001000>, /* ap 23 */
+ <0x0003d000 0x0003d000 0x001000>, /* ap 24 */
+ <0x0003e000 0x0003e000 0x001000>, /* ap 25 */
+ <0x0003f000 0x0003f000 0x001000>, /* ap 26 */
+ <0x00040000 0x00040000 0x001000>, /* ap 27 */
+ <0x00041000 0x00041000 0x001000>, /* ap 28 */
+ <0x00042000 0x00042000 0x001000>, /* ap 29 */
+ <0x00043000 0x00043000 0x001000>, /* ap 30 */
+ <0x00080000 0x00080000 0x002000>, /* ap 31 */
+ <0x00082000 0x00082000 0x001000>, /* ap 32 */
+ <0x0004a000 0x0004a000 0x001000>, /* ap 33 */
+ <0x0004b000 0x0004b000 0x001000>, /* ap 34 */
+ <0x00074000 0x00074000 0x002000>, /* ap 35 */
+ <0x00076000 0x00076000 0x001000>, /* ap 36 */
+ <0x00050000 0x00050000 0x001000>, /* ap 37 */
+ <0x00051000 0x00051000 0x001000>, /* ap 38 */
+ <0x00078000 0x00078000 0x002000>, /* ap 39 */
+ <0x0007a000 0x0007a000 0x001000>, /* ap 40 */
+ <0x00054000 0x00054000 0x001000>, /* ap 41 */
+ <0x00055000 0x00055000 0x001000>, /* ap 42 */
+ <0x0007c000 0x0007c000 0x002000>, /* ap 43 */
+ <0x0007e000 0x0007e000 0x001000>, /* ap 44 */
+ <0x0004c000 0x0004c000 0x001000>, /* ap 45 */
+ <0x0004d000 0x0004d000 0x001000>, /* ap 46 */
+ <0x00020000 0x00020000 0x001000>, /* ap 47 */
+ <0x00021000 0x00021000 0x001000>, /* ap 48 */
+ <0x00022000 0x00022000 0x001000>, /* ap 49 */
+ <0x00023000 0x00023000 0x001000>, /* ap 50 */
+ <0x00024000 0x00024000 0x001000>, /* ap 51 */
+ <0x00025000 0x00025000 0x001000>, /* ap 52 */
+ <0x00046000 0x00046000 0x001000>, /* ap 53 */
+ <0x00047000 0x00047000 0x001000>, /* ap 54 */
+ <0x00048000 0x00048000 0x001000>, /* ap 55 */
+ <0x00049000 0x00049000 0x001000>, /* ap 56 */
+ <0x00058000 0x00058000 0x002000>, /* ap 57 */
+ <0x0005a000 0x0005a000 0x001000>, /* ap 58 */
+ <0x0005b000 0x0005b000 0x001000>, /* ap 59 */
+ <0x0005c000 0x0005c000 0x001000>, /* ap 60 */
+ <0x0005d000 0x0005d000 0x001000>, /* ap 61 */
+ <0x0005e000 0x0005e000 0x001000>, /* ap 62 */
+ <0x45800000 0x45800000 0x400000>, /* L3 data port */
+ <0x45c00000 0x45c00000 0x400000>, /* L3 data port */
+ <0x46000000 0x46000000 0x400000>, /* L3 data port */
+ <0x48436000 0x48436000 0x400000>, /* L3 data port */
+ <0x4843a000 0x4843a000 0x400000>, /* L3 data port */
+ <0x4844c000 0x4844c000 0x400000>, /* L3 data port */
+ <0x48450000 0x48450000 0x400000>, /* L3 data port */
+ <0x48454000 0x48454000 0x400000>; /* L3 data port */
+
+ target-module@20000 { /* 0x48420000, ap 47 02.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x20050 0x4>,
+ <0x20054 0x4>,
+ <0x20058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_UART7_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x20000 0x1000>;
+
+ uart7: serial@0 {
+ compatible = "ti,dra742-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ status = "disabled";
+ };
+ };
+
+ target-module@22000 { /* 0x48422000, ap 49 0a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x22050 0x4>,
+ <0x22054 0x4>,
+ <0x22058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_UART8_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x22000 0x1000>;
+
+ uart8: serial@0 {
+ compatible = "ti,dra742-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ status = "disabled";
+ };
+ };
+
+ target-module@24000 { /* 0x48424000, ap 51 12.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x24050 0x4>,
+ <0x24054 0x4>,
+ <0x24058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_UART9_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x24000 0x1000>;
+
+ uart9: serial@0 {
+ compatible = "ti,dra742-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ status = "disabled";
+ };
+ };
+
+ target-module@2c000 { /* 0x4842c000, ap 7 18.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2c000 0x1000>;
+ };
+
+ target-module@36000 { /* 0x48436000, ap 17 06.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x36000 0x1000>;
+ };
+
+ target-module@3a000 { /* 0x4843a000, ap 21 3e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3a000 0x1000>;
+ };
+
+ atl_tm: target-module@3c000 { /* 0x4843c000, ap 23 08.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x3c000 0x4>;
+ reg-names = "rev";
+ clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3c000 0x1000>;
+
+ atl: atl@0 {
+ compatible = "ti,dra7-atl";
+ reg = <0x0 0x3ff>;
+ ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
+ <&atl_clkin2_ck>, <&atl_clkin3_ck>;
+ clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ target-module@3e000 { /* 0x4843e000, ap 25 30.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x3e000 0x4>,
+ <0x3e004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3e000 0x1000>;
+
+ epwmss0: epwmss@0 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x0 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges = <0 0 0x1000>;
+
+ ecap0: pwm@100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ ehrpwm0: pwm@200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x200 0x80>;
+ clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+ };
+ };
+
+ target-module@40000 { /* 0x48440000, ap 27 38.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x40000 0x4>,
+ <0x40004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x40000 0x1000>;
+
+ epwmss1: epwmss@0 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x0 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges = <0 0 0x1000>;
+
+ ecap1: pwm@100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ ehrpwm1: pwm@200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x200 0x80>;
+ clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+ };
+ };
+
+ target-module@42000 { /* 0x48442000, ap 29 20.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x42000 0x4>,
+ <0x42004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x42000 0x1000>;
+
+ epwmss2: epwmss@0 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x0 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges = <0 0 0x1000>;
+
+ ecap2: pwm@100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ ehrpwm2: pwm@200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x200 0x80>;
+ clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+ };
+ };
+
+ target-module@46000 { /* 0x48446000, ap 53 40.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x46000 0x1000>;
+ };
+
+ target-module@48000 { /* 0x48448000, ap 55 48.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x48000 0x1000>;
+ };
+
+ target-module@4a000 { /* 0x4844a000, ap 33 1a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4a000 0x1000>;
+ };
+
+ target-module@4c000 { /* 0x4844c000, ap 45 1c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4c000 0x1000>;
+ };
+
+ target-module@50000 { /* 0x48450000, ap 37 24.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x50000 0x1000>;
+ };
+
+ target-module@54000 { /* 0x48454000, ap 41 2c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x54000 0x1000>;
+ };
+
+ target-module@58000 { /* 0x48458000, ap 57 28.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x58000 0x2000>;
+ };
+
+ target-module@5b000 { /* 0x4845b000, ap 59 46.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5b000 0x1000>;
+ };
+
+ target-module@5d000 { /* 0x4845d000, ap 61 22.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5d000 0x1000>;
+ };
+
+ target-module@60000 { /* 0x48460000, ap 9 0e.0 */
+ compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+ reg = <0x60000 0x4>,
+ <0x60004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+ clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>,
+ <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
+ <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>;
+ clock-names = "fck", "ahclkx", "ahclkr";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x60000 0x2000>,
+ <0x45800000 0x45800000 0x400000>;
+
+ mcasp1: mcasp@0 {
+ compatible = "ti,dra7-mcasp-audio";
+ reg = <0x0 0x2000>,
+ <0x45800000 0x1000>; /* L3 data port */
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
+ dma-names = "tx", "rx";
+ clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>,
+ <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
+ <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>;
+ clock-names = "fck", "ahclkx", "ahclkr";
+ status = "disabled";
+ };
+ };
+
+ target-module@64000 { /* 0x48464000, ap 11 1e.0 */
+ compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+ reg = <0x64000 0x4>,
+ <0x64004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>;
+ clock-names = "fck", "ahclkx", "ahclkr";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x64000 0x2000>,
+ <0x45c00000 0x45c00000 0x400000>;
+
+ mcasp2: mcasp@0 {
+ compatible = "ti,dra7-mcasp-audio";
+ reg = <0x0 0x2000>,
+ <0x45c00000 0x1000>; /* L3 data port */
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
+ dma-names = "tx", "rx";
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>,
+ <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>;
+ clock-names = "fck", "ahclkx", "ahclkr";
+ status = "disabled";
+ };
+ };
+
+ target-module@68000 { /* 0x48468000, ap 13 26.0 */
+ compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+ reg = <0x68000 0x4>,
+ <0x68004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x68000 0x2000>,
+ <0x46000000 0x46000000 0x400000>;
+
+ mcasp3: mcasp@0 {
+ compatible = "ti,dra7-mcasp-audio";
+ reg = <0x0 0x2000>,
+ <0x46000000 0x1000>; /* L3 data port */
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
+ dma-names = "tx", "rx";
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+ };
+
+ target-module@6c000 { /* 0x4846c000, ap 15 2e.0 */
+ compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+ reg = <0x6c000 0x4>,
+ <0x6c004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6c000 0x2000>,
+ <0x48436000 0x48436000 0x400000>;
+
+ mcasp4: mcasp@0 {
+ compatible = "ti,dra7-mcasp-audio";
+ reg = <0x0 0x2000>,
+ <0x48436000 0x1000>; /* L3 data port */
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
+ dma-names = "tx", "rx";
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+ };
+
+ target-module@70000 { /* 0x48470000, ap 19 36.0 */
+ compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+ reg = <0x70000 0x4>,
+ <0x70004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x70000 0x2000>,
+ <0x4843a000 0x4843a000 0x400000>;
+
+ mcasp5: mcasp@0 {
+ compatible = "ti,dra7-mcasp-audio";
+ reg = <0x0 0x2000>,
+ <0x4843a000 0x1000>; /* L3 data port */
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
+ dma-names = "tx", "rx";
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+ };
+
+ target-module@74000 { /* 0x48474000, ap 35 14.0 */
+ compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+ reg = <0x74000 0x4>,
+ <0x74004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x74000 0x2000>,
+ <0x4844c000 0x4844c000 0x400000>;
+
+ mcasp6: mcasp@0 {
+ compatible = "ti,dra7-mcasp-audio";
+ reg = <0x0 0x2000>,
+ <0x4844c000 0x1000>; /* L3 data port */
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
+ dma-names = "tx", "rx";
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+ };
+
+ target-module@78000 { /* 0x48478000, ap 39 0c.0 */
+ compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+ reg = <0x78000 0x4>,
+ <0x78004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x78000 0x2000>,
+ <0x48450000 0x48450000 0x400000>;
+
+ mcasp7: mcasp@0 {
+ compatible = "ti,dra7-mcasp-audio";
+ reg = <0x0 0x2000>,
+ <0x48450000 0x1000>; /* L3 data port */
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
+ dma-names = "tx", "rx";
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+ };
+
+ target-module@7c000 { /* 0x4847c000, ap 43 04.0 */
+ compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+ reg = <0x7c000 0x4>,
+ <0x7c004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7c000 0x2000>,
+ <0x48454000 0x48454000 0x400000>;
+
+ mcasp8: mcasp@0 {
+ compatible = "ti,dra7-mcasp-audio";
+ reg = <0x0 0x2000>,
+ <0x48454000 0x1000>; /* L3 data port */
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
+ dma-names = "tx", "rx";
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+ };
+
+ target-module@80000 { /* 0x48480000, ap 31 16.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x80020 0x4>;
+ reg-names = "rev";
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_DCAN2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000 0x2000>;
+
+ dcan2: can@0 {
+ compatible = "ti,dra7-d_can";
+ reg = <0x0 0x2000>;
+ syscon-raminit = <&scm_conf 0x558 1>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_clkin1>;
+ status = "disabled";
+ };
+ };
+
+ target-module@84000 { /* 0x48484000, ap 3 10.0 */
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x85200 0x4>,
+ <0x85208 0x4>,
+ <0x85204 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <0>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ ti,syss-mask = <1>;
+ clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x84000 0x4000>;
+ /*
+ * Do not allow gating of cpsw clock as workaround
+ * for errata i877. Keeping internal clock disabled
+ * causes the device switching characteristics
+ * to degrade over time and eventually fail to meet
+ * the data manual delay time/skew specs.
+ */
+ ti,no-idle;
+
+ mac_sw: switch@0 {
+ compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch";
+ reg = <0x0 0x4000>;
+ ranges = <0 0 0x4000>;
+ clocks = <&gmac_main_clk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ syscon = <&scm_conf>;
+ status = "disabled";
+
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpsw_port1: port@1 {
+ reg = <1>;
+ label = "port1";
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1>;
+ };
+
+ cpsw_port2: port@2 {
+ reg = <2>;
+ label = "port2";
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2>;
+ };
+ };
+
+ davinci_mdio_sw: mdio@1000 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ clocks = <&gmac_main_clk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus_freq = <1000000>;
+ reg = <0x1000 0x100>;
+ };
+
+ cpts {
+ clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
+ clock-names = "cpts";
+ };
+ };
+ };
+ };
+};
+
+&l4_per3 { /* 0x48800000 */
+ compatible = "ti,dra7-l4-per3", "simple-pm-bus";
+ power-domains = <&prm_l4per>;
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_L4_PER3_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x48800000 0x800>,
+ <0x48800800 0x800>,
+ <0x48801000 0x400>,
+ <0x48801400 0x400>,
+ <0x48801800 0x400>;
+ reg-names = "ap", "la", "ia0", "ia1", "ia2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x48800000 0x200000>; /* segment 0 */
+
+ segment@0 { /* 0x48800000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00000800 0x00000800 0x000800>, /* ap 1 */
+ <0x00001000 0x00001000 0x000400>, /* ap 2 */
+ <0x00001400 0x00001400 0x000400>, /* ap 3 */
+ <0x00001800 0x00001800 0x000400>, /* ap 4 */
+ <0x00020000 0x00020000 0x001000>, /* ap 5 */
+ <0x00021000 0x00021000 0x001000>, /* ap 6 */
+ <0x00022000 0x00022000 0x001000>, /* ap 7 */
+ <0x00023000 0x00023000 0x001000>, /* ap 8 */
+ <0x00024000 0x00024000 0x001000>, /* ap 9 */
+ <0x00025000 0x00025000 0x001000>, /* ap 10 */
+ <0x00026000 0x00026000 0x001000>, /* ap 11 */
+ <0x00027000 0x00027000 0x001000>, /* ap 12 */
+ <0x00028000 0x00028000 0x001000>, /* ap 13 */
+ <0x00029000 0x00029000 0x001000>, /* ap 14 */
+ <0x0002a000 0x0002a000 0x001000>, /* ap 15 */
+ <0x0002b000 0x0002b000 0x001000>, /* ap 16 */
+ <0x0002c000 0x0002c000 0x001000>, /* ap 17 */
+ <0x0002d000 0x0002d000 0x001000>, /* ap 18 */
+ <0x0002e000 0x0002e000 0x001000>, /* ap 19 */
+ <0x0002f000 0x0002f000 0x001000>, /* ap 20 */
+ <0x00170000 0x00170000 0x010000>, /* ap 21 */
+ <0x00180000 0x00180000 0x001000>, /* ap 22 */
+ <0x00190000 0x00190000 0x010000>, /* ap 23 */
+ <0x001a0000 0x001a0000 0x001000>, /* ap 24 */
+ <0x001b0000 0x001b0000 0x010000>, /* ap 25 */
+ <0x001c0000 0x001c0000 0x001000>, /* ap 26 */
+ <0x001d0000 0x001d0000 0x010000>, /* ap 27 */
+ <0x001e0000 0x001e0000 0x001000>, /* ap 28 */
+ <0x00038000 0x00038000 0x001000>, /* ap 29 */
+ <0x00039000 0x00039000 0x001000>, /* ap 30 */
+ <0x0005c000 0x0005c000 0x001000>, /* ap 31 */
+ <0x0005d000 0x0005d000 0x001000>, /* ap 32 */
+ <0x0003a000 0x0003a000 0x001000>, /* ap 33 */
+ <0x0003b000 0x0003b000 0x001000>, /* ap 34 */
+ <0x0003c000 0x0003c000 0x001000>, /* ap 35 */
+ <0x0003d000 0x0003d000 0x001000>, /* ap 36 */
+ <0x0003e000 0x0003e000 0x001000>, /* ap 37 */
+ <0x0003f000 0x0003f000 0x001000>, /* ap 38 */
+ <0x00040000 0x00040000 0x001000>, /* ap 39 */
+ <0x00041000 0x00041000 0x001000>, /* ap 40 */
+ <0x00042000 0x00042000 0x001000>, /* ap 41 */
+ <0x00043000 0x00043000 0x001000>, /* ap 42 */
+ <0x00044000 0x00044000 0x001000>, /* ap 43 */
+ <0x00045000 0x00045000 0x001000>, /* ap 44 */
+ <0x00046000 0x00046000 0x001000>, /* ap 45 */
+ <0x00047000 0x00047000 0x001000>, /* ap 46 */
+ <0x00048000 0x00048000 0x001000>, /* ap 47 */
+ <0x00049000 0x00049000 0x001000>, /* ap 48 */
+ <0x0004a000 0x0004a000 0x001000>, /* ap 49 */
+ <0x0004b000 0x0004b000 0x001000>, /* ap 50 */
+ <0x0004c000 0x0004c000 0x001000>, /* ap 51 */
+ <0x0004d000 0x0004d000 0x001000>, /* ap 52 */
+ <0x0004e000 0x0004e000 0x001000>, /* ap 53 */
+ <0x0004f000 0x0004f000 0x001000>, /* ap 54 */
+ <0x00050000 0x00050000 0x001000>, /* ap 55 */
+ <0x00051000 0x00051000 0x001000>, /* ap 56 */
+ <0x00052000 0x00052000 0x001000>, /* ap 57 */
+ <0x00053000 0x00053000 0x001000>, /* ap 58 */
+ <0x00054000 0x00054000 0x001000>, /* ap 59 */
+ <0x00055000 0x00055000 0x001000>, /* ap 60 */
+ <0x00056000 0x00056000 0x001000>, /* ap 61 */
+ <0x00057000 0x00057000 0x001000>, /* ap 62 */
+ <0x00058000 0x00058000 0x001000>, /* ap 63 */
+ <0x00059000 0x00059000 0x001000>, /* ap 64 */
+ <0x0005a000 0x0005a000 0x001000>, /* ap 65 */
+ <0x0005b000 0x0005b000 0x001000>, /* ap 66 */
+ <0x00064000 0x00064000 0x001000>, /* ap 67 */
+ <0x00065000 0x00065000 0x001000>, /* ap 68 */
+ <0x0005e000 0x0005e000 0x001000>, /* ap 69 */
+ <0x0005f000 0x0005f000 0x001000>, /* ap 70 */
+ <0x00060000 0x00060000 0x001000>, /* ap 71 */
+ <0x00061000 0x00061000 0x001000>, /* ap 72 */
+ <0x00062000 0x00062000 0x001000>, /* ap 73 */
+ <0x00063000 0x00063000 0x001000>, /* ap 74 */
+ <0x00140000 0x00140000 0x020000>, /* ap 75 */
+ <0x00160000 0x00160000 0x001000>, /* ap 76 */
+ <0x00016000 0x00016000 0x001000>, /* ap 77 */
+ <0x00017000 0x00017000 0x001000>, /* ap 78 */
+ <0x000c0000 0x000c0000 0x020000>, /* ap 79 */
+ <0x000e0000 0x000e0000 0x001000>, /* ap 80 */
+ <0x00004000 0x00004000 0x001000>, /* ap 81 */
+ <0x00005000 0x00005000 0x001000>, /* ap 82 */
+ <0x00080000 0x00080000 0x020000>, /* ap 83 */
+ <0x000a0000 0x000a0000 0x001000>, /* ap 84 */
+ <0x00100000 0x00100000 0x020000>, /* ap 85 */
+ <0x00120000 0x00120000 0x001000>, /* ap 86 */
+ <0x00010000 0x00010000 0x001000>, /* ap 87 */
+ <0x00011000 0x00011000 0x001000>, /* ap 88 */
+ <0x0000a000 0x0000a000 0x001000>, /* ap 89 */
+ <0x0000b000 0x0000b000 0x001000>, /* ap 90 */
+ <0x0001c000 0x0001c000 0x001000>, /* ap 91 */
+ <0x0001d000 0x0001d000 0x001000>, /* ap 92 */
+ <0x0001e000 0x0001e000 0x001000>, /* ap 93 */
+ <0x0001f000 0x0001f000 0x001000>, /* ap 94 */
+ <0x00002000 0x00002000 0x001000>, /* ap 95 */
+ <0x00003000 0x00003000 0x001000>; /* ap 96 */
+
+ target-module@2000 { /* 0x48802000, ap 95 7c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x2000 0x4>,
+ <0x2010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX13_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2000 0x1000>;
+
+ mailbox13: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+ };
+
+ target-module@4000 { /* 0x48804000, ap 81 20.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+ };
+
+ target-module@a000 { /* 0x4880a000, ap 89 18.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa000 0x1000>;
+ };
+
+ target-module@10000 { /* 0x48810000, ap 87 28.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000 0x1000>;
+ };
+
+ target-module@16000 { /* 0x48816000, ap 77 1e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x16000 0x1000>;
+ };
+
+ target-module@1c000 { /* 0x4881c000, ap 91 1c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1c000 0x1000>;
+ };
+
+ target-module@1e000 { /* 0x4881e000, ap 93 2c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e000 0x1000>;
+ };
+
+ target-module@20000 { /* 0x48820000, ap 5 08.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x20000 0x4>,
+ <0x20010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+ clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x20000 0x1000>;
+
+ timer5: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@22000 { /* 0x48822000, ap 7 24.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x22000 0x4>,
+ <0x22010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+ clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x22000 0x1000>;
+
+ timer6: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@24000 { /* 0x48824000, ap 9 26.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x24000 0x4>,
+ <0x24010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+ clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x24000 0x1000>;
+
+ timer7: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@26000 { /* 0x48826000, ap 11 0c.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x26000 0x4>,
+ <0x26010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+ clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x1000>;
+
+ timer8: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@28000 { /* 0x48828000, ap 13 16.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x28000 0x4>,
+ <0x28010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l4per_pwrdm, l4per3_clkdm */
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x28000 0x1000>;
+
+ timer13: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ };
+ };
+
+ target-module@2a000 { /* 0x4882a000, ap 15 10.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x2a000 0x4>,
+ <0x2a010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l4per_pwrdm, l4per3_clkdm */
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2a000 0x1000>;
+
+ timer14: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ };
+ };
+ timer15_target: target-module@2c000 { /* 0x4882c000, ap 17 02.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x2c000 0x4>,
+ <0x2c010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l4per_pwrdm, l4per3_clkdm */
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2c000 0x1000>;
+
+ timer15: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ };
+ };
+
+ timer16_target: target-module@2e000 { /* 0x4882e000, ap 19 14.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x2e000 0x4>,
+ <0x2e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l4per_pwrdm, l4per3_clkdm */
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2e000 0x1000>;
+
+ timer16: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ };
+ };
+
+ rtctarget: target-module@38000 { /* 0x48838000, ap 29 12.0 */
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x38074 0x4>,
+ <0x38078 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): rtc_pwrdm, rtc_clkdm */
+ clocks = <&rtc_clkctrl DRA7_RTC_RTCSS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x38000 0x1000>;
+
+ rtc: rtc@0 {
+ compatible = "ti,am3352-rtc";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_32k_ck>;
+ };
+ };
+
+ target-module@3a000 { /* 0x4883a000, ap 33 3e.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x3a000 0x4>,
+ <0x3a010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3a000 0x1000>;
+
+ mailbox2: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+ };
+
+ target-module@3c000 { /* 0x4883c000, ap 35 3a.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x3c000 0x4>,
+ <0x3c010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3c000 0x1000>;
+
+ mailbox3: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+ };
+
+ target-module@3e000 { /* 0x4883e000, ap 37 46.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x3e000 0x4>,
+ <0x3e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3e000 0x1000>;
+
+ mailbox4: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+ };
+
+ target-module@40000 { /* 0x48840000, ap 39 64.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x40000 0x4>,
+ <0x40010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x40000 0x1000>;
+
+ mailbox5: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+ };
+
+ target-module@42000 { /* 0x48842000, ap 41 4e.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x42000 0x4>,
+ <0x42010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX6_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x42000 0x1000>;
+
+ mailbox6: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+ };
+
+ target-module@44000 { /* 0x48844000, ap 43 42.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x44000 0x4>,
+ <0x44010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX7_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x44000 0x1000>;
+
+ mailbox7: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+ };
+
+ target-module@46000 { /* 0x48846000, ap 45 48.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x46000 0x4>,
+ <0x46010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX8_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x46000 0x1000>;
+
+ mailbox8: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+ };
+
+ target-module@48000 { /* 0x48848000, ap 47 36.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x48000 0x1000>;
+ };
+
+ target-module@4a000 { /* 0x4884a000, ap 49 38.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4a000 0x1000>;
+ };
+
+ target-module@4c000 { /* 0x4884c000, ap 51 44.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4c000 0x1000>;
+ };
+
+ target-module@4e000 { /* 0x4884e000, ap 53 4c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4e000 0x1000>;
+ };
+
+ target-module@50000 { /* 0x48850000, ap 55 40.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x50000 0x1000>;
+ };
+
+ target-module@52000 { /* 0x48852000, ap 57 54.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x52000 0x1000>;
+ };
+
+ target-module@54000 { /* 0x48854000, ap 59 1a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x54000 0x1000>;
+ };
+
+ target-module@56000 { /* 0x48856000, ap 61 22.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x56000 0x1000>;
+ };
+
+ target-module@58000 { /* 0x48858000, ap 63 2a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x58000 0x1000>;
+ };
+
+ target-module@5a000 { /* 0x4885a000, ap 65 5c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5a000 0x1000>;
+ };
+
+ target-module@5c000 { /* 0x4885c000, ap 31 32.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5c000 0x1000>;
+ };
+
+ target-module@5e000 { /* 0x4885e000, ap 69 6c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x5e000 0x4>,
+ <0x5e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX9_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5e000 0x1000>;
+
+ mailbox9: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+ };
+
+ target-module@60000 { /* 0x48860000, ap 71 4a.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x60000 0x4>,
+ <0x60010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX10_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x60000 0x1000>;
+
+ mailbox10: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+ };
+
+ target-module@62000 { /* 0x48862000, ap 73 74.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x62000 0x4>,
+ <0x62010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX11_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x62000 0x1000>;
+
+ mailbox11: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+ };
+
+ target-module@64000 { /* 0x48864000, ap 67 52.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x64000 0x4>,
+ <0x64010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX12_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x64000 0x1000>;
+
+ mailbox12: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+ };
+
+ target-module@80000 { /* 0x48880000, ap 83 0e.1 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x80000 0x4>,
+ <0x80010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+ clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000 0x20000>;
+
+ omap_dwc3_1: omap_dwc3_1@0 {
+ compatible = "ti,dwc3";
+ reg = <0x0 0x10000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges = <0 0 0x20000>;
+
+ usb1: usb@10000 {
+ compatible = "snps,dwc3";
+ reg = <0x10000 0x17000>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
+ phys = <&usb2_phy1>, <&usb3_phy1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ maximum-speed = "super-speed";
+ dr_mode = "otg";
+ snps,dis_u3_susphy_quirk;
+ snps,dis_u2_susphy_quirk;
+ };
+ };
+ };
+
+ target-module@c0000 { /* 0x488c0000, ap 79 06.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xc0000 0x4>,
+ <0xc0010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+ clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc0000 0x20000>;
+
+ omap_dwc3_2: omap_dwc3_2@0 {
+ compatible = "ti,dwc3";
+ reg = <0x0 0x10000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges = <0 0 0x20000>;
+
+ usb2: usb@10000 {
+ compatible = "snps,dwc3";
+ reg = <0x10000 0x17000>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
+ phys = <&usb2_phy2>;
+ phy-names = "usb2-phy";
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ snps,dis_u3_susphy_quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_metastability_quirk;
+ };
+ };
+ };
+
+ usb3_tm: target-module@100000 { /* 0x48900000, ap 85 04.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x100000 0x4>,
+ <0x100010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+ clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x100000 0x20000>;
+
+ omap_dwc3_3: omap_dwc3_3@0 {
+ compatible = "ti,dwc3";
+ reg = <0x0 0x10000>;
+ interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges = <0 0 0x20000>;
+ status = "disabled";
+
+ usb3: usb@10000 {
+ compatible = "snps,dwc3";
+ reg = <0x10000 0x17000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ snps,dis_u3_susphy_quirk;
+ snps,dis_u2_susphy_quirk;
+ };
+ };
+ };
+
+ target-module@170000 { /* 0x48970000, ap 21 0a.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x170010 0x4>;
+ reg-names = "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x170000 0x10000>;
+ status = "disabled";
+ };
+
+ target-module@190000 { /* 0x48990000, ap 23 2e.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x190010 0x4>;
+ reg-names = "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x190000 0x10000>;
+ status = "disabled";
+ };
+
+ target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x1b0000 0x4>,
+ <0x1b0010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1b0000 0x10000>;
+ status = "disabled";
+ };
+
+ target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x1d0010 0x4>;
+ reg-names = "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ power-domains = <&prm_vpe>;
+ clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1d0000 0x10000>;
+
+ vpe: vpe@0 {
+ compatible = "ti,dra7-vpe";
+ reg = <0x0000 0x120>,
+ <0x0700 0x80>,
+ <0x5700 0x18>,
+ <0xd000 0x400>;
+ reg-names = "vpe_top",
+ "sc",
+ "csc",
+ "vpdma";
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+};
+
+&l4_wkup { /* 0x4ae00000 */
+ compatible = "ti,dra7-l4-wkup", "simple-pm-bus";
+ power-domains = <&prm_wkupaon>;
+ clocks = <&wkupaon_clkctrl DRA7_WKUPAON_L4_WKUP_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x4ae00000 0x800>,
+ <0x4ae00800 0x800>,
+ <0x4ae01000 0x1000>;
+ reg-names = "ap", "la", "ia0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4ae00000 0x010000>, /* segment 0 */
+ <0x00010000 0x4ae10000 0x010000>, /* segment 1 */
+ <0x00020000 0x4ae20000 0x010000>, /* segment 2 */
+ <0x00030000 0x4ae30000 0x010000>; /* segment 3 */
+
+ segment@0 { /* 0x4ae00000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00001000 0x00001000 0x001000>, /* ap 1 */
+ <0x00000800 0x00000800 0x000800>, /* ap 2 */
+ <0x00006000 0x00006000 0x002000>, /* ap 3 */
+ <0x00008000 0x00008000 0x001000>, /* ap 4 */
+ <0x00004000 0x00004000 0x001000>, /* ap 15 */
+ <0x00005000 0x00005000 0x001000>, /* ap 16 */
+ <0x0000c000 0x0000c000 0x001000>, /* ap 17 */
+ <0x0000d000 0x0000d000 0x001000>; /* ap 18 */
+
+ target-module@4000 { /* 0x4ae04000, ap 15 40.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4000 0x4>,
+ <0x4010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+ clocks = <&wkupaon_clkctrl DRA7_WKUPAON_COUNTER_32K_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+
+ counter32k: counter@0 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x0 0x40>;
+ };
+ };
+
+ target-module@6000 { /* 0x4ae06000, ap 3 10.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x6000 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6000 0x2000>;
+
+ prm: prm@0 {
+ compatible = "ti,dra7-prm", "simple-bus";
+ reg = <0 0x3000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x3000>;
+
+ prm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prm_clockdomains: clockdomains {
+ };
+ };
+ };
+
+ target-module@c000 { /* 0x4ae0c000, ap 17 50.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xc000 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc000 0x1000>;
+
+ scm_wkup: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0 0x1000>;
+ };
+ };
+ };
+
+ segment@10000 { /* 0x4ae10000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */
+ <0x00001000 0x00011000 0x001000>, /* ap 6 */
+ <0x00004000 0x00014000 0x001000>, /* ap 7 */
+ <0x00005000 0x00015000 0x001000>, /* ap 8 */
+ <0x00008000 0x00018000 0x001000>, /* ap 9 */
+ <0x00009000 0x00019000 0x001000>, /* ap 10 */
+ <0x0000c000 0x0001c000 0x001000>, /* ap 11 */
+ <0x0000d000 0x0001d000 0x001000>; /* ap 12 */
+
+ target-module@0 { /* 0x4ae10000, ap 5 20.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x0 0x4>,
+ <0x10 0x4>,
+ <0x114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+ clocks = <&wkupaon_clkctrl DRA7_WKUPAON_GPIO1_CLKCTRL 0>,
+ <&wkupaon_clkctrl DRA7_WKUPAON_GPIO1_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+
+ gpio1: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@4000 { /* 0x4ae14000, ap 7 28.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4000 0x4>,
+ <0x4010 0x4>,
+ <0x4014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+ clocks = <&wkupaon_clkctrl DRA7_WKUPAON_WD_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+
+ wdt2: wdt@0 {
+ compatible = "ti,omap3-wdt";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ timer1_target: target-module@8000 { /* 0x4ae18000, ap 9 30.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x8000 0x4>,
+ <0x8010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+ clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-alwon;
+ };
+ };
+
+ target-module@c000 { /* 0x4ae1c000, ap 11 38.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc000 0x1000>;
+ };
+ };
+
+ segment@20000 { /* 0x4ae20000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */
+ <0x0000a000 0x0002a000 0x001000>, /* ap 14 */
+ <0x00000000 0x00020000 0x001000>, /* ap 19 */
+ <0x00001000 0x00021000 0x001000>, /* ap 20 */
+ <0x00002000 0x00022000 0x001000>, /* ap 21 */
+ <0x00003000 0x00023000 0x001000>, /* ap 22 */
+ <0x00007000 0x00027000 0x000400>, /* ap 23 */
+ <0x00008000 0x00028000 0x000800>, /* ap 24 */
+ <0x00009000 0x00029000 0x000100>, /* ap 25 */
+ <0x00008800 0x00028800 0x000200>, /* ap 26 */
+ <0x00008a00 0x00028a00 0x000100>, /* ap 27 */
+ <0x0000b000 0x0002b000 0x001000>, /* ap 28 */
+ <0x0000c000 0x0002c000 0x001000>, /* ap 29 */
+ <0x0000f000 0x0002f000 0x001000>; /* ap 32 */
+
+ target-module@0 { /* 0x4ae20000, ap 19 08.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x0 0x4>,
+ <0x10 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+ clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER12_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+
+ timer12: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-alwon;
+ ti,timer-secure;
+ };
+ };
+
+ target-module@2000 { /* 0x4ae22000, ap 21 18.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2000 0x1000>;
+ };
+
+ target-module@6000 { /* 0x4ae26000, ap 13 48.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00006000 0x00001000>,
+ <0x00001000 0x00007000 0x00000400>,
+ <0x00002000 0x00008000 0x00000800>,
+ <0x00002800 0x00008800 0x00000200>,
+ <0x00002a00 0x00008a00 0x00000100>,
+ <0x00003000 0x00009000 0x00000100>;
+ };
+
+ target-module@b000 { /* 0x4ae2b000, ap 28 02.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xb050 0x4>,
+ <0xb054 0x4>,
+ <0xb058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+ clocks = <&wkupaon_clkctrl DRA7_WKUPAON_UART10_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb000 0x1000>;
+
+ uart10: serial@0 {
+ compatible = "ti,dra742-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ status = "disabled";
+ };
+ };
+
+ target-module@f000 { /* 0x4ae2f000, ap 32 58.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf000 0x1000>;
+ };
+ };
+
+ segment@30000 { /* 0x4ae30000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0000c000 0x0003c000 0x002000>, /* ap 30 */
+ <0x0000e000 0x0003e000 0x001000>, /* ap 31 */
+ <0x00000000 0x00030000 0x001000>, /* ap 33 */
+ <0x00001000 0x00031000 0x001000>, /* ap 34 */
+ <0x00002000 0x00032000 0x001000>, /* ap 35 */
+ <0x00003000 0x00033000 0x001000>, /* ap 36 */
+ <0x00004000 0x00034000 0x001000>, /* ap 37 */
+ <0x00005000 0x00035000 0x001000>, /* ap 38 */
+ <0x00006000 0x00036000 0x001000>, /* ap 39 */
+ <0x00007000 0x00037000 0x001000>, /* ap 40 */
+ <0x00008000 0x00038000 0x001000>, /* ap 41 */
+ <0x00009000 0x00039000 0x001000>, /* ap 42 */
+ <0x0000a000 0x0003a000 0x001000>; /* ap 43 */
+
+ target-module@1000 { /* 0x4ae31000, ap 34 60.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1000 0x1000>;
+ };
+
+ target-module@3000 { /* 0x4ae33000, ap 36 0a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3000 0x1000>;
+ };
+
+ target-module@5000 { /* 0x4ae35000, ap 38 0c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5000 0x1000>;
+ };
+
+ target-module@7000 { /* 0x4ae37000, ap 40 68.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7000 0x1000>;
+ };
+
+ target-module@9000 { /* 0x4ae39000, ap 42 70.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x9000 0x1000>;
+ };
+
+ target-module@c000 { /* 0x4ae3c000, ap 30 04.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xc020 0x4>;
+ reg-names = "rev";
+ clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc000 0x2000>;
+
+ dcan1: can@0 {
+ compatible = "ti,dra7-d_can";
+ reg = <0x0 0x2000>;
+ syscon-raminit = <&scm_conf 0x558 0>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 24>;
+ status = "disabled";
+ };
+ };
+ };
+};
+
diff --git a/src/arm/ti/omap/dra7-mmc-iodelay.dtsi b/src/arm/ti/omap/dra7-mmc-iodelay.dtsi
new file mode 100644
index 0000000..cb1a682
--- /dev/null
+++ b/src/arm/ti/omap/dra7-mmc-iodelay.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MMC IOdelay values for TI's DRA7xx SoCs.
+ * Copyright (C) 2018 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+
+&dra7_pmx_core {
+ mmc1_pins_default_no_clk_pu: mmc1-default-no-clk-pu-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/dra7.dtsi b/src/arm/ti/omap/dra7.dtsi
new file mode 100644
index 0000000..6509c74
--- /dev/null
+++ b/src/arm/ti/omap/dra7.dtsi
@@ -0,0 +1,1361 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Based on "omap4.dtsi"
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/dra7.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/dra.h>
+#include <dt-bindings/clock/dra7.h>
+
+#define MAX_SOURCES 400
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ compatible = "ti,dra7xx";
+ interrupt-parent = <&crossbar_mpu>;
+ chosen { };
+
+ aliases {
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ i2c3 = &i2c4;
+ i2c4 = &i2c5;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ serial6 = &uart7;
+ serial7 = &uart8;
+ serial8 = &uart9;
+ serial9 = &uart10;
+ ethernet0 = &cpsw_port1;
+ ethernet1 = &cpsw_port2;
+ d_can0 = &dcan1;
+ d_can1 = &dcan2;
+ spi0 = &qspi;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ status = "disabled"; /* See ARM architected timer wrap erratum i940 */
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&gic>;
+ };
+
+ gic: interrupt-controller@48211000 {
+ compatible = "arm,cortex-a15-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0 0x48211000 0x0 0x1000>,
+ <0x0 0x48212000 0x0 0x2000>,
+ <0x0 0x48214000 0x0 0x2000>,
+ <0x0 0x48216000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-parent = <&gic>;
+ };
+
+ wakeupgen: interrupt-controller@48281000 {
+ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0 0x48281000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+
+ operating-points-v2 = <&cpu0_opp_table>;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+
+ /* cooling options */
+ #cooling-cells = <2>; /* min followed by max */
+
+ vbb-supply = <&abb_mpu>;
+ };
+ };
+
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ syscon = <&scm_wkup>;
+
+ opp-1000000000 {
+ /* OPP NOM */
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1060000 850000 1150000>,
+ <1060000 850000 1150000>;
+ opp-supported-hw = <0xFF 0x01>;
+ opp-suspend;
+ };
+
+ opp-1176000000 {
+ /* OPP OD */
+ opp-hz = /bits/ 64 <1176000000>;
+ opp-microvolt = <1160000 885000 1160000>,
+ <1160000 885000 1160000>;
+
+ opp-supported-hw = <0xFF 0x02>;
+ };
+
+ opp-1500000000 {
+ /* OPP High */
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1210000 950000 1250000>,
+ <1210000 950000 1250000>;
+ opp-supported-hw = <0xFF 0x04>;
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the SOC interconnect.
+ * The real OMAP interconnect network is quite complex.
+ * Since it will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp: ocp {
+ compatible = "simple-pm-bus";
+ power-domains = <&prm_core>;
+ clocks = <&l3main1_clkctrl DRA7_L3MAIN1_L3_MAIN_1_CLKCTRL 0>,
+ <&l3instr_clkctrl DRA7_L3INSTR_L3_MAIN_2_CLKCTRL 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0xc0000000>;
+ dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
+
+ l3-noc@44000000 {
+ compatible = "ti,dra7-l3-noc";
+ reg = <0x44000000 0x1000000>,
+ <0x45000000 0x1000>;
+ interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ l4_cfg: interconnect@4a000000 {
+ };
+ l4_wkup: interconnect@4ae00000 {
+ };
+ l4_per1: interconnect@48000000 {
+ };
+
+ target-module@48210000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ power-domains = <&prm_mpu>;
+ clocks = <&mpu_clkctrl DRA7_MPU_MPU_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48210000 0x1f0000>;
+
+ mpu {
+ compatible = "ti,omap5-mpu";
+ };
+ };
+
+ l4_per2: interconnect@48400000 {
+ };
+ l4_per3: interconnect@48800000 {
+ };
+
+ /*
+ * Register access seems to have complex dependencies and also
+ * seems to need an enabled phy. See the TRM chapter for "Table
+ * 26-678. Main Sequence PCIe Controller Global Initialization"
+ * and also dra7xx_pcie_probe().
+ */
+ axi0: target-module@51000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ power-domains = <&prm_l3init>;
+ resets = <&prm_l3init 0>;
+ reset-names = "rstctrl";
+ clocks = <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 0>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>;
+ clock-names = "fck", "phy-clk", "phy-clk-div";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0x51000000 0x51000000 0x3000>,
+ <0x20000000 0x20000000 0x10000000>;
+ dma-ranges;
+ /**
+ * To enable PCI endpoint mode, disable the pcie1_rc
+ * node and enable pcie1_ep mode.
+ */
+ pcie1_rc: pcie@51000000 {
+ reg = <0x51000000 0x2000>,
+ <0x51002000 0x14c>,
+ <0x20001000 0x2000>;
+ reg-names = "rc_dbics", "ti_conf", "config";
+ interrupts = <0 232 0x4>, <0 233 0x4>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0x00000000 0x20003000 0 0x00010000>,
+ <0x82000000 0 0x20013000 0x20013000 0 0x0ffed000>;
+ bus-range = <0x00 0xff>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ linux,pci-domain = <0>;
+ phys = <&pcie1_phy>;
+ phy-names = "pcie-phy0";
+ ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie1_intc 1>,
+ <0 0 0 2 &pcie1_intc 2>,
+ <0 0 0 3 &pcie1_intc 3>,
+ <0 0 0 4 &pcie1_intc 4>;
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
+ status = "disabled";
+ pcie1_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie1_ep: pcie_ep@51000000 {
+ reg = <0x51000000 0x28>,
+ <0x51002000 0x14c>,
+ <0x51001000 0x28>,
+ <0x20001000 0x10000000>;
+ reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
+ interrupts = <0 232 0x4>;
+ num-lanes = <1>;
+ num-ib-windows = <4>;
+ num-ob-windows = <16>;
+ phys = <&pcie1_phy>;
+ phy-names = "pcie-phy0";
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
+ ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
+ status = "disabled";
+ };
+ };
+
+ /*
+ * Register access seems to have complex dependencies and also
+ * seems to need an enabled phy. See the TRM chapter for "Table
+ * 26-678. Main Sequence PCIe Controller Global Initialization"
+ * and also dra7xx_pcie_probe().
+ */
+ axi1: target-module@51800000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ clocks = <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 0>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>;
+ clock-names = "fck", "phy-clk", "phy-clk-div";
+ power-domains = <&prm_l3init>;
+ resets = <&prm_l3init 1>;
+ reset-names = "rstctrl";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0x51800000 0x51800000 0x3000>,
+ <0x30000000 0x30000000 0x10000000>;
+ dma-ranges;
+ status = "disabled";
+ pcie2_rc: pcie@51800000 {
+ reg = <0x51800000 0x2000>,
+ <0x51802000 0x14c>,
+ <0x30001000 0x2000>;
+ reg-names = "rc_dbics", "ti_conf", "config";
+ interrupts = <0 355 0x4>, <0 356 0x4>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>,
+ <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>;
+ bus-range = <0x00 0xff>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ linux,pci-domain = <1>;
+ phys = <&pcie2_phy>;
+ phy-names = "pcie-phy0";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie2_intc 1>,
+ <0 0 0 2 &pcie2_intc 2>,
+ <0 0 0 3 &pcie2_intc 3>,
+ <0 0 0 4 &pcie2_intc 4>;
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
+ pcie2_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+ ocmcram1: ocmcram@40300000 {
+ compatible = "mmio-sram";
+ reg = <0x40300000 0x80000>;
+ ranges = <0x0 0x40300000 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * This is a placeholder for an optional reserved
+ * region for use by secure software. The size
+ * of this region is not known until runtime so it
+ * is set as zero to either be updated to reserve
+ * space or left unchanged to leave all SRAM for use.
+ * On HS parts that that require the reserved region
+ * either the bootloader can update the size to
+ * the required amount or the node can be overridden
+ * from the board dts file for the secure platform.
+ */
+ sram-hs@0 {
+ compatible = "ti,secure-ram";
+ reg = <0x0 0x0>;
+ };
+ };
+
+ /*
+ * NOTE: ocmcram2 and ocmcram3 are not available on all
+ * DRA7xx and AM57xx variants. Confirm availability in
+ * the data manual for the exact part number in use
+ * before enabling these nodes in the board dts file.
+ */
+ ocmcram2: ocmcram@40400000 {
+ status = "disabled";
+ compatible = "mmio-sram";
+ reg = <0x40400000 0x100000>;
+ ranges = <0x0 0x40400000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ ocmcram3: ocmcram@40500000 {
+ status = "disabled";
+ compatible = "mmio-sram";
+ reg = <0x40500000 0x100000>;
+ ranges = <0x0 0x40500000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ bandgap: bandgap@4a0021e0 {
+ reg = <0x4a0021e0 0xc
+ 0x4a00232c 0xc
+ 0x4a002380 0x2c
+ 0x4a0023C0 0x3c
+ 0x4a002564 0x8
+ 0x4a002574 0x50>;
+ compatible = "ti,dra752-bandgap";
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ dsp1_system: dsp_system@40d00000 {
+ compatible = "syscon";
+ reg = <0x40d00000 0x100>;
+ };
+
+ dra7_iodelay_core: padconf@4844a000 {
+ compatible = "ti,dra7-iodelay";
+ reg = <0x4844a000 0x0d1c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <2>;
+ };
+
+ target-module@43300000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x43300000 0x4>,
+ <0x43300010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x43300000 0x100000>;
+
+ edma: dma@0 {
+ compatible = "ti,edma3-tpcc";
+ reg = <0 0x100000>;
+ reg-names = "edma3_cc";
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_ccint", "edma3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
+
+ /*
+ * memcpy is disabled, can be enabled with:
+ * ti,edma-memcpy-channels = <20 21>;
+ * for example. Note that these channels need to be
+ * masked in the xbar as well.
+ */
+ };
+ };
+
+ target-module@43400000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x43400000 0x4>,
+ <0x43400010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x43400000 0x100000>;
+
+ edma_tptc0: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@43500000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x43500000 0x4>,
+ <0x43500010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x43500000 0x100000>;
+
+ edma_tptc1: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@4e000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4e000000 0x4>,
+ <0x4e000010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ranges = <0x0 0x4e000000 0x2000000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ dmm@0 {
+ compatible = "ti,omap5-dmm";
+ reg = <0 0x800>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ ipu1: ipu@58820000 {
+ compatible = "ti,dra7-ipu";
+ reg = <0x58820000 0x10000>;
+ reg-names = "l2ram";
+ iommus = <&mmu_ipu1>;
+ status = "disabled";
+ resets = <&prm_ipu 0>, <&prm_ipu 1>;
+ clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
+ firmware-name = "dra7-ipu1-fw.xem4";
+ };
+
+ ipu2: ipu@55020000 {
+ compatible = "ti,dra7-ipu";
+ reg = <0x55020000 0x10000>;
+ reg-names = "l2ram";
+ iommus = <&mmu_ipu2>;
+ status = "disabled";
+ resets = <&prm_core 0>, <&prm_core 1>;
+ clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
+ firmware-name = "dra7-ipu2-fw.xem4";
+ };
+
+ dsp1: dsp@40800000 {
+ compatible = "ti,dra7-dsp";
+ reg = <0x40800000 0x48000>,
+ <0x40e00000 0x8000>,
+ <0x40f00000 0x8000>;
+ reg-names = "l2ram", "l1pram", "l1dram";
+ ti,bootreg = <&scm_conf 0x55c 10>;
+ iommus = <&mmu0_dsp1>, <&mmu1_dsp1>;
+ status = "disabled";
+ resets = <&prm_dsp1 0>;
+ clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+ firmware-name = "dra7-dsp1-fw.xe66";
+ };
+
+ target-module@40d01000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x40d01000 0x4>,
+ <0x40d01010 0x4>,
+ <0x40d01014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp1 1>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x40d01000 0x1000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu0_dsp1: mmu@0 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+ };
+ };
+
+ target-module@40d02000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x40d02000 0x4>,
+ <0x40d02010 0x4>,
+ <0x40d02014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp1 1>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x40d02000 0x1000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu1_dsp1: mmu@0 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+ };
+ };
+
+ target-module@58882000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x58882000 0x4>,
+ <0x58882010 0x4>,
+ <0x58882014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_ipu 2>;
+ reset-names = "rstctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x58882000 0x100>;
+
+ mmu_ipu1: mmu@0 {
+ compatible = "ti,dra7-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
+ };
+
+ target-module@55082000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55082000 0x4>,
+ <0x55082010 0x4>,
+ <0x55082014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_core 2>;
+ reset-names = "rstctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x55082000 0x100>;
+
+ mmu_ipu2: mmu@0 {
+ compatible = "ti,dra7-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
+ };
+
+ abb_mpu: regulator-abb-mpu {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_mpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
+ <0x4ae06014 0x4>, <0x4a003b20 0xc>,
+ <0x4ae0c158 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x80>;
+ /* LDOVBBMPU_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBMPU_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1060000 0 0x0 0 0x02000000 0x01F00000
+ 1160000 0 0x4 0 0x02000000 0x01F00000
+ 1210000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_ivahd: regulator-abb-ivahd {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_ivahd";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
+ <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
+ <0x4a002470 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x40000000>;
+ /* LDOVBBIVA_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBIVA_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1055000 0 0x0 0 0x02000000 0x01F00000
+ 1150000 0 0x4 0 0x02000000 0x01F00000
+ 1250000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_dspeve: regulator-abb-dspeve {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_dspeve";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
+ <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
+ <0x4a00246c 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x20000000>;
+ /* LDOVBBDSPEVE_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBDSPEVE_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1055000 0 0x0 0 0x02000000 0x01F00000
+ 1150000 0 0x4 0 0x02000000 0x01F00000
+ 1250000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_gpu: regulator-abb-gpu {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_gpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
+ <0x4ae06010 0x4>, <0x4a003b08 0xc>,
+ <0x4ae0c154 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x10000000>;
+ /* LDOVBBGPU_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBGPU_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1090000 0 0x0 0 0x02000000 0x01F00000
+ 1210000 0 0x4 0 0x02000000 0x01F00000
+ 1280000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ target-module@4b300000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x4b300000 0x4>,
+ <0x4b300010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b300000 0x1000>,
+ <0x5c000000 0x5c000000 0x4000000>;
+
+ qspi: spi@0 {
+ compatible = "ti,dra7xxx-qspi";
+ reg = <0 0x100>,
+ <0x5c000000 0x4000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ syscon-chipselects = <&scm_conf 0x558>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
+ clock-names = "fck";
+ num-cs = <4>;
+ interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ /* OCP2SCP1 */
+ /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
+
+ target-module@50000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x50000000 4>,
+ <0x50000010 4>,
+ <0x50000014 4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&l3main1_clkctrl DRA7_L3MAIN1_GPMC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
+ <0x00000000 0x00000000 0x40000000>; /* data */
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ reg = <0x50000000 0x37c>; /* device IO registers */
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 4 0>;
+ dma-names = "rxtx";
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+ };
+
+ target-module@56000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x5600fe00 0x4>,
+ <0x5600fe10 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x56000000 0x2000000>;
+ };
+
+ crossbar_mpu: crossbar@4a002a48 {
+ compatible = "ti,irq-crossbar";
+ reg = <0x4a002a48 0x130>;
+ interrupt-controller;
+ interrupt-parent = <&wakeupgen>;
+ #interrupt-cells = <3>;
+ ti,max-irqs = <160>;
+ ti,max-crossbar-sources = <MAX_SOURCES>;
+ ti,reg-size = <2>;
+ ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
+ ti,irqs-skip = <10 133 139 140>;
+ ti,irqs-safe-map = <0>;
+ };
+
+ target-module@58000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x58000000 4>,
+ <0x58000014 4>;
+ reg-names = "rev", "syss";
+ ti,syss-mask = <1>;
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 0>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 11>;
+ clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x58000000 0x800000>;
+
+ dss: dss@0 {
+ compatible = "ti,dra7-dss";
+ /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
+ /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
+ status = "disabled";
+ /* CTRL_CORE_DSS_PLL_CONTROL */
+ syscon-pll-ctrl = <&scm_conf 0x538>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x800000>;
+
+ target-module@1000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x1000 0x4>,
+ <0x1010 0x4>,
+ <0x1014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1000 0x1000>;
+
+ dispc@0 {
+ compatible = "ti,dra7-dispc";
+ reg = <0 0x1000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ /* CTRL_CORE_SMA_SW_1 */
+ syscon-pol = <&scm_conf 0x534>;
+ };
+ };
+
+ target-module@40000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x40000 0x4>,
+ <0x40010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck", "dss_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x40000 0x40000>;
+
+ hdmi: encoder@0 {
+ compatible = "ti,dra7-hdmi";
+ reg = <0 0x200>,
+ <0x200 0x80>,
+ <0x300 0x80>,
+ <0x20000 0x19000>;
+ reg-names = "wp", "pll", "phy", "core";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
+ clock-names = "fck", "sys_clk";
+ dmas = <&sdma_xbar 76>;
+ dma-names = "audio_tx";
+ };
+ };
+ };
+ };
+
+ target-module@59000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x59000020 0x4>;
+ reg-names = "rev";
+ clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x59000000 0x1000>;
+
+ bb2d: gpu@0 {
+ compatible = "vivante,gc";
+ reg = <0x0 0x700>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
+ clock-names = "core";
+ };
+ };
+
+ aes1_target: target-module@4b500000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4b500080 0x4>,
+ <0x4b500084 0x4>,
+ <0x4b500088 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl DRA7_L4SEC_AES1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b500000 0x1000>;
+
+ aes1: aes@0 {
+ compatible = "ti,omap4-aes";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+ };
+
+ aes2_target: target-module@4b700000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4b700080 0x4>,
+ <0x4b700084 0x4>,
+ <0x4b700088 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl DRA7_L4SEC_AES2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b700000 0x1000>;
+
+ aes2: aes@0 {
+ compatible = "ti,omap4-aes";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+ };
+
+ sham1_target: target-module@4b101000 {
+ compatible = "ti,sysc-omap3-sham", "ti,sysc";
+ reg = <0x4b101100 0x4>,
+ <0x4b101110 0x4>,
+ <0x4b101114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b101000 0x1000>;
+
+ sham1: sham@0 {
+ compatible = "ti,omap5-sham";
+ reg = <0 0x300>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 119 0>;
+ dma-names = "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+ };
+
+ sham2_target: target-module@42701000 {
+ compatible = "ti,sysc-omap3-sham", "ti,sysc";
+ reg = <0x42701100 0x4>,
+ <0x42701110 0x4>,
+ <0x42701114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x42701000 0x1000>;
+
+ sham2: sham@0 {
+ compatible = "ti,omap5-sham";
+ reg = <0 0x300>;
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 165 0>;
+ dma-names = "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+ };
+
+ iva_hd_target: target-module@5a000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x5a05a400 0x4>,
+ <0x5a05a410 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ power-domains = <&prm_iva>;
+ resets = <&prm_iva 2>;
+ reset-names = "rstctrl";
+ clocks = <&iva_clkctrl DRA7_IVA_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5a000000 0x5a000000 0x1000000>,
+ <0x5b000000 0x5b000000 0x1000000>;
+
+ iva {
+ compatible = "ti,ivahd";
+ };
+ };
+
+ opp_supply_mpu: opp-supply@4a003b20 {
+ compatible = "ti,omap5-opp-supply";
+ reg = <0x4a003b20 0xc>;
+ ti,efuse-settings = <
+ /* uV offset */
+ 1060000 0x0
+ 1160000 0x4
+ 1210000 0x8
+ >;
+ ti,absolute-max-voltage-uv = <1500000>;
+ };
+
+ };
+
+ thermal_zones: thermal-zones {
+ #include "omap4-cpu-thermal.dtsi"
+ #include "omap5-gpu-thermal.dtsi"
+ #include "omap5-core-thermal.dtsi"
+ #include "dra7-dspeve-thermal.dtsi"
+ #include "dra7-iva-thermal.dtsi"
+ };
+
+};
+
+&cpu_thermal {
+ polling-delay = <500>; /* milliseconds */
+ coefficients = <0 2000>;
+};
+
+&gpu_thermal {
+ coefficients = <0 2000>;
+};
+
+&core_thermal {
+ coefficients = <0 2000>;
+};
+
+&dspeve_thermal {
+ coefficients = <0 2000>;
+};
+
+&iva_thermal {
+ coefficients = <0 2000>;
+};
+
+&cpu_crit {
+ temperature = <120000>; /* milli Celsius */
+};
+
+&core_crit {
+ temperature = <120000>; /* milli Celsius */
+};
+
+&gpu_crit {
+ temperature = <120000>; /* milli Celsius */
+};
+
+&dspeve_crit {
+ temperature = <120000>; /* milli Celsius */
+};
+
+&iva_crit {
+ temperature = <120000>; /* milli Celsius */
+};
+
+#include "dra7-l4.dtsi"
+#include "dra7xx-clocks.dtsi"
+
+&prm {
+ prm_mpu: prm@300 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x300 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_dsp1: prm@400 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x400 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_ipu: prm@500 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x500 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_coreaon: prm@628 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x628 0xd8>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_core: prm@700 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x700 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_iva: prm@f00 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0xf00 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_cam: prm@1000 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1000 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_dss: prm@1100 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1100 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_gpu: prm@1200 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1200 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_l3init: prm@1300 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1300 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_l4per: prm@1400 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1400 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_custefuse: prm@1600 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1600 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_wkupaon: prm@1724 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1724 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_dsp2: prm@1b00 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1b00 0x40>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_eve1: prm@1b40 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1b40 0x40>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_eve2: prm@1b80 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1b80 0x40>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_eve3: prm@1bc0 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1bc0 0x40>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_eve4: prm@1c00 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1c00 0x60>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_rtc: prm@1c60 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1c60 0x20>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_vpe: prm@1c80 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1c80 0x80>;
+ #power-domain-cells = <0>;
+ };
+};
+
+/* Preferred always-on timer for clockevent */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_32k_ck>;
+ };
+};
+
+/* Local timers, see ARM architected timer wrap erratum i940 */
+&timer15_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
+ assigned-clock-parents = <&timer_sys_clk_div>;
+ };
+};
+
+&timer16_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
+ assigned-clock-parents = <&timer_sys_clk_div>;
+ };
+};
diff --git a/src/arm/ti/omap/dra71-evm.dts b/src/arm/ti/omap/dra71-evm.dts
new file mode 100644
index 0000000..a643644
--- /dev/null
+++ b/src/arm/ti/omap/dra71-evm.dts
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra71x.dtsi"
+#include "dra7-mmc-iodelay.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+ compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7";
+ model = "TI DRA718 EVM";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ipu2_memory_region: ipu2-memory@95800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x95800000 0x0 0x3800000>;
+ reusable;
+ status = "okay";
+ };
+
+ dsp1_memory_region: dsp1-memory@99000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x99000000 0x0 0x4000000>;
+ reusable;
+ status = "okay";
+ };
+
+ ipu1_memory_region: ipu1-memory@9d000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x9d000000 0x0 0x2000000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
+ vpo_sd_1v8_3v3: gpio-regulator-TPS74801 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "vddshv8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ vin-supply = <&evm_5v0>;
+
+ gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0
+ 3300000 0x1>;
+ };
+
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&lp8732_buck0_reg>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ poweroff: gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
+ input;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ lp8733: lp8733@60 {
+ compatible = "ti,lp8733";
+ reg = <0x60>;
+
+ buck0-in-supply =<&vsys_3v3>;
+ buck1-in-supply =<&vsys_3v3>;
+ ldo0-in-supply =<&evm_5v0>;
+ ldo1-in-supply =<&evm_5v0>;
+
+ lp8733_regulators: regulators {
+ lp8733_buck0_reg: buck0 {
+ /* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */
+ regulator-name = "lp8733-buck0";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ lp8733_buck1_reg: buck1 {
+ /* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */
+ regulator-name = "lp8733-buck1";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ lp8733_ldo0_reg: ldo0 {
+ /* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */
+ regulator-name = "lp8733-ldo0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ lp8733_ldo1_reg: ldo1 {
+ /* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */
+ regulator-name = "lp8733-ldo1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+
+ lp8732: lp8732@61 {
+ compatible = "ti,lp8732";
+ reg = <0x61>;
+
+ buck0-in-supply =<&vsys_3v3>;
+ buck1-in-supply =<&vsys_3v3>;
+ ldo0-in-supply =<&vsys_3v3>;
+ ldo1-in-supply =<&vsys_3v3>;
+
+ lp8732_regulators: regulators {
+ lp8732_buck0_reg: buck0 {
+ /* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */
+ regulator-name = "lp8732-buck0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ lp8732_buck1_reg: buck1 {
+ /* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */
+ regulator-name = "lp8732-buck1";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ lp8732_ldo0_reg: ldo0 {
+ /* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */
+ regulator-name = "lp8732-ldo0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ lp8732_ldo1_reg: ldo1 {
+ /* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */
+ regulator-name = "lp8732-ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&pcf_lcd {
+ interrupt-parent = <&gpio7>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pcf_gpio_21 {
+ interrupt-parent = <&gpio7>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pcf_hdmi {
+ hdmi-i2c-disable-hog {
+ /*
+ * PM_OEn to High: Disable routing I2C3 to PM_I2C
+ * With this PM_SEL(p3) should not matter
+ */
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "pm_oe_n";
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+ vqmmc-supply = <&vpo_sd_1v8_3v3>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+ vmmc-supply = <&evm_1v8_sw>;
+ vqmmc-supply = <&evm_1v8_sw>;
+};
+
+&mac_sw {
+ mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
+ <&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */
+ <&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */
+ status = "okay";
+};
+
+&cpsw_port1 {
+ phy-handle = <&dp83867_0>;
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <&dp83867_1>;
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+ dp83867_0: ethernet-phy@2 {
+ reg = <2>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ ti,min-output-impedance;
+ ti,dp83867-rxctrl-strap-quirk;
+ };
+
+ dp83867_1: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ ti,min-output-impedance;
+ ti,dp83867-rxctrl-strap-quirk;
+ };
+};
+
+/* No Sata on this device */
+&sata_phy {
+ status = "disabled";
+};
+
+&sata {
+ status = "disabled";
+};
+
+/* No RTC on this device */
+&rtc {
+ status = "disabled";
+};
+
+&usb2_phy1 {
+ phy-supply = <&lp8733_ldo1_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&lp8733_ldo1_reg>;
+};
+
+&dss {
+ /* Supplied by VDA_1V8_PLL */
+ vdda_video-supply = <&lp8732_ldo0_reg>;
+};
+
+&hdmi {
+ /* Supplied by VDA_1V8_PHY */
+ vdda_video-supply = <&lp8732_ldo1_reg>;
+};
+
+&extcon_usb1 {
+ vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+};
+
+&extcon_usb2 {
+ vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+};
+
+&ipu2 {
+ status = "okay";
+ memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+ status = "okay";
+ memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+ status = "okay";
+ memory-region = <&dsp1_memory_region>;
+};
diff --git a/src/arm/ti/omap/dra71x.dtsi b/src/arm/ti/omap/dra71x.dtsi
new file mode 100644
index 0000000..9c270d8
--- /dev/null
+++ b/src/arm/ti/omap/dra71x.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dra72-evm-common.dtsi"
+
+&rtctarget {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/dra72-evm-common.dtsi b/src/arm/ti/omap/dra72-evm-common.dtsi
new file mode 100644
index 0000000..31ab0c6
--- /dev/null
+++ b/src/arm/ti/omap/dra72-evm-common.dtsi
@@ -0,0 +1,593 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "dra72x.dtsi"
+#include "dra7-ipu-dsp-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ti-dra7-atl.h>
+
+/ {
+ compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
+
+ aliases {
+ display0 = &hdmi0;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ evm_12v0: fixedregulator-evm12v0 {
+ /* main supply */
+ compatible = "regulator-fixed";
+ regulator-name = "evm_12v0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ evm_5v0: fixedregulator-evm5v0 {
+ /* Output 1 of TPS43351QDAPRQ1 on dra72-evm */
+ /* Output 1 of LM5140QRWGTQ1 on dra71-evm */
+ compatible = "regulator-fixed";
+ regulator-name = "evm_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&evm_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ evm_3v6: fixedregulator-evm_3v6 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v6";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+ vin-supply = <&evm_5v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vsys_3v3: fixedregulator-vsys3v3 {
+ /* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
+ /* Output 2 of LM5140QRWGTQ1 on dra71-evm */
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&evm_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ evm_3v3_sw: fixedregulator-evm_3v3 {
+ /* TPS22965DSG */
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vsys_3v3>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ aic_dvdd: fixedregulator-aic_dvdd {
+ /* TPS77018DBVT */
+ compatible = "regulator-fixed";
+ regulator-name = "aic_dvdd";
+ vin-supply = <&evm_3v3_sw>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ evm_3v3_sd: fixedregulator-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&evm_3v3_sw>;
+ enable-active-high;
+ gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ extcon_usb1: extcon_usb1 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ extcon_usb2: extcon_usb2 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ hdmi0: connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+
+ tpd12s015: encoder {
+ compatible = "ti,tpd12s015";
+
+ gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */
+ <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */
+ <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ sound0: sound0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "DRA7xx-EVM";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line Out",
+ "Microphone", "Mic Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "MIC3L", "Mic Jack",
+ "MIC3R", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound0_master>;
+ simple-audio-card,frame-master = <&sound0_master>;
+ simple-audio-card,bitclock-inversion;
+
+ sound0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp3>;
+ system-clock-frequency = <5644800>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ clocks = <&atl_clkin2_ck>;
+ };
+ };
+
+ vmmcwl_fixed: fixedregulator-mmcwl {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcwl_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ clk_ov5640_fixed: clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+};
+
+&dra7_pmx_core {
+ dcan1_pins_default: dcan1-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+ DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
+ >;
+ };
+
+ dcan1_pins_sleep: dcan1-sleep-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
+ DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
+ >;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pcf_lcd: gpio@20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcf_gpio_21: gpio@21 {
+ compatible = "nxp,pcf8575";
+ reg = <0x21>;
+ lines-initial-states = <0x1408>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ tlv320aic3106: tlv320aic3106@19 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x19>;
+ adc-settle-ms = <40>;
+ ai3x-micbias-vg = <1>; /* 2.0V */
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&evm_3v3_sw>;
+ IOVDD-supply = <&evm_3v3_sw>;
+ DRVDD-supply = <&evm_3v3_sw>;
+ DVDD-supply = <&aic_dvdd>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pcf_hdmi: pcf8575@26 {
+ compatible = "nxp,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /*
+ * initial state is used here to keep the mdio interface
+ * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
+ * VIN2_S0 driven high otherwise Ethernet stops working
+ * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
+ */
+ lines-initial-states = <0x0f2b>;
+
+ hdmi-audio-hog {
+ /* vin6_sel_s0: high: VIN6, low: audio */
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "vin6_sel_s0";
+ };
+ };
+
+ ov5640@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+
+ clocks = <&clk_ov5640_fixed>;
+ clock-names = "xclk";
+
+ port {
+ csi2_cam0: endpoint {
+ remote-endpoint = <&csi2_phy0>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+
+};
+
+&uart1 {
+ status = "okay";
+ interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <&dra7_pmx_core 0x3e0>;
+};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ /*
+ * For the existing IOdelay configuration via U-Boot we don't
+ * support NAND on dra72-evm. Keep it disabled. Enabling it
+ * requires a different configuration by U-Boot.
+ */
+ status = "disabled";
+ ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
+ nand@0,0 {
+ /* To use NAND, DIP switch SW5 must be set like so:
+ * SW5.1 (NAND_SELn) = ON (LOW)
+ * SW5.9 (GPMC_WPN) = OFF (HIGH)
+ */
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* device IO registers */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+ ti,nand-xfer-type = "prefetch-dma";
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <80>;
+ gpmc,cs-wr-off-ns = <80>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <60>;
+ gpmc,adv-wr-off-ns = <60>;
+ gpmc,we-on-ns = <10>;
+ gpmc,we-off-ns = <50>;
+ gpmc,oe-on-ns = <4>;
+ gpmc,oe-off-ns = <40>;
+ gpmc,access-ns = <40>;
+ gpmc,wr-access-ns = <80>;
+ gpmc,rd-cycle-ns = <80>;
+ gpmc,wr-cycle-ns = <80>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ /* MTD partition table */
+ /* All SPL-* partitions are sized to minimal length
+ * which can be independently programmable. For
+ * NAND flash this is equal to size of erase-block */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "NAND.SPL";
+ reg = <0x00000000 0x00020000>;
+ };
+ partition@1 {
+ label = "NAND.SPL.backup1";
+ reg = <0x00020000 0x00020000>;
+ };
+ partition@2 {
+ label = "NAND.SPL.backup2";
+ reg = <0x00040000 0x00020000>;
+ };
+ partition@3 {
+ label = "NAND.SPL.backup3";
+ reg = <0x00060000 0x00020000>;
+ };
+ partition@4 {
+ label = "NAND.u-boot-spl-os";
+ reg = <0x00080000 0x00040000>;
+ };
+ partition@5 {
+ label = "NAND.u-boot";
+ reg = <0x000c0000 0x00100000>;
+ };
+ partition@6 {
+ label = "NAND.u-boot-env";
+ reg = <0x001c0000 0x00020000>;
+ };
+ partition@7 {
+ label = "NAND.u-boot-env.backup1";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@8 {
+ label = "NAND.kernel";
+ reg = <0x00200000 0x00800000>;
+ };
+ partition@9 {
+ label = "NAND.file-system";
+ reg = <0x00a00000 0x0f600000>;
+ };
+ };
+};
+
+&omap_dwc3_1 {
+ extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+ extcon = <&extcon_usb2>;
+};
+
+&usb1 {
+ dr_mode = "otg";
+ extcon = <&extcon_usb1>;
+};
+
+&usb2 {
+ dr_mode = "host";
+ extcon = <&extcon_usb2>;
+};
+
+&mmc1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+ vmmc-supply = <&evm_3v3_sd>;
+ bus-width = <4>;
+ /*
+ * SDCD signal is not being used here - using the fact that GPIO mode
+ * is a viable alternative
+ */
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+ max-frequency = <192000000>;
+};
+
+&mmc2 {
+ /* SW5-3 in ON position */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_default>;
+ bus-width = <8>;
+ non-removable;
+ max-frequency = <192000000>;
+};
+
+&mmc4 {
+ status = "okay";
+ vmmc-supply = <&evm_3v6>;
+ vqmmc-supply = <&vmmcwl_fixed>;
+ bus-width = <4>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ non-removable;
+ pinctrl-names = "default", "hs", "sdr12", "sdr25";
+ pinctrl-0 = <&mmc4_pins_default>;
+ pinctrl-1 = <&mmc4_pins_default>;
+ pinctrl-2 = <&mmc4_pins_default>;
+ pinctrl-3 = <&mmc4_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wifi@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&dcan1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep", "active";
+ pinctrl-0 = <&dcan1_pins_sleep>;
+ pinctrl-1 = <&dcan1_pins_sleep>;
+ pinctrl-2 = <&dcan1_pins_default>;
+};
+
+&qspi {
+ status = "okay";
+
+ spi-max-frequency = <76800000>;
+ flash@0 {
+ compatible = "s25fl256s1";
+ spi-max-frequency = <76800000>;
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* MTD partition table.
+ * The ROM checks the first four physical blocks
+ * for a valid file to boot and the flash here is
+ * 64KiB block size.
+ */
+ partition@0 {
+ label = "QSPI.SPL";
+ reg = <0x00000000 0x00010000>;
+ };
+ partition@1 {
+ label = "QSPI.SPL.backup1";
+ reg = <0x00010000 0x00010000>;
+ };
+ partition@2 {
+ label = "QSPI.SPL.backup2";
+ reg = <0x00020000 0x00010000>;
+ };
+ partition@3 {
+ label = "QSPI.SPL.backup3";
+ reg = <0x00030000 0x00010000>;
+ };
+ partition@4 {
+ label = "QSPI.u-boot";
+ reg = <0x00040000 0x00100000>;
+ };
+ partition@5 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x00140000 0x00080000>;
+ };
+ partition@6 {
+ label = "QSPI.u-boot-env";
+ reg = <0x001c0000 0x00010000>;
+ };
+ partition@7 {
+ label = "QSPI.u-boot-env.backup1";
+ reg = <0x001d0000 0x0010000>;
+ };
+ partition@8 {
+ label = "QSPI.kernel";
+ reg = <0x001e0000 0x0800000>;
+ };
+ partition@9 {
+ label = "QSPI.file-system";
+ reg = <0x009e0000 0x01620000>;
+ };
+ };
+};
+
+&dss {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
+
+&atl {
+ assigned-clocks = <&abe_dpll_sys_clk_mux>,
+ <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>,
+ <&dpll_abe_ck>,
+ <&dpll_abe_m2x2_ck>,
+ <&atl_clkin2_ck>;
+ assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+ assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+ status = "okay";
+
+ atl2 {
+ bws = <DRA7_ATL_WS_MCASP2_FSX>;
+ aws = <DRA7_ATL_WS_MCASP3_FSX>;
+ };
+};
+
+&mcasp3 {
+ #sound-dai-cells = <0>;
+
+ assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+ assigned-clock-parents = <&atl_clkin2_ck>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializer */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+&pcie1_rc {
+ status = "okay";
+};
+
+&csi2_0 {
+ csi2_phy0: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+};
diff --git a/src/arm/ti/omap/dra72-evm-revc.dts b/src/arm/ti/omap/dra72-evm-revc.dts
new file mode 100644
index 0000000..f242b93
--- /dev/null
+++ b/src/arm/ti/omap/dra72-evm-revc.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+ model = "TI DRA722 Rev C EVM";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ipu2_cma_pool: ipu2_cma@95800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x95800000 0x0 0x3800000>;
+ reusable;
+ status = "okay";
+ };
+
+ dsp1_cma_pool: dsp1_cma@99000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x99000000 0x0 0x4000000>;
+ reusable;
+ status = "okay";
+ };
+
+ ipu1_cma_pool: ipu1_cma@9d000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x9d000000 0x0 0x2000000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&smps4_reg>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&i2c1 {
+ tps65917: tps65917@58 {
+ reg = <0x58>;
+
+ interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
+ };
+};
+
+#include "dra72-evm-tps65917.dtsi"
+
+&ldo2_reg {
+ /* LDO2_OUT --> VDDA_1V8_PHY2 */
+ regulator-always-on;
+ regulator-boot-on;
+};
+
+&hdmi {
+ vdda-supply = <&ldo2_reg>;
+};
+
+&pcf_gpio_21 {
+ interrupt-parent = <&gpio3>;
+ interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&mac_sw {
+ mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
+ <&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */
+ <&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */
+ status = "okay";
+};
+
+&cpsw_port1 {
+ phy-handle = <&dp83867_0>;
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <&dp83867_1>;
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+ dp83867_0: ethernet-phy@2 {
+ reg = <2>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ ti,min-output-impedance;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ ti,dp83867-rxctrl-strap-quirk;
+ };
+
+ dp83867_1: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ ti,min-output-impedance;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ ti,dp83867-rxctrl-strap-quirk;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+ vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+ vmmc-supply = <&evm_1v8_sw>;
+};
+
+&ipu2 {
+ status = "okay";
+ memory-region = <&ipu2_cma_pool>;
+};
+
+&ipu1 {
+ status = "okay";
+ memory-region = <&ipu1_cma_pool>;
+};
+
+&dsp1 {
+ status = "okay";
+ memory-region = <&dsp1_cma_pool>;
+};
diff --git a/src/arm/ti/omap/dra72-evm-tps65917.dtsi b/src/arm/ti/omap/dra72-evm-tps65917.dtsi
new file mode 100644
index 0000000..7b433f5
--- /dev/null
+++ b/src/arm/ti/omap/dra72-evm-tps65917.dtsi
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * Integrated Power Management Chip
+ * https://www.ti.com/lit/ds/symlink/tps65917-q1.pdf
+ */
+
+&tps65917 {
+ compatible = "ti,tps65917";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ti,system-power-controller;
+
+ tps65917_pmic {
+ compatible = "ti,tps65917-pmic";
+
+ smps1-in-supply = <&vsys_3v3>;
+ smps2-in-supply = <&vsys_3v3>;
+ smps3-in-supply = <&vsys_3v3>;
+ smps4-in-supply = <&vsys_3v3>;
+ smps5-in-supply = <&vsys_3v3>;
+ ldo1-in-supply = <&vsys_3v3>;
+ ldo2-in-supply = <&vsys_3v3>;
+ ldo3-in-supply = <&vsys_3v3>;
+ ldo4-in-supply = <&evm_5v0>;
+ ldo5-in-supply = <&vsys_3v3>;
+
+ tps65917_regulators: regulators {
+ smps1_reg: smps1 {
+ /* VDD_MPU */
+ regulator-name = "smps1";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps2_reg: smps2 {
+ /* VDD_CORE */
+ regulator-name = "smps2";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ smps3_reg: smps3 {
+ /* VDD_GPU IVA DSPEVE */
+ regulator-name = "smps3";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ smps4_reg: smps4 {
+ /* VDDS1V8 */
+ regulator-name = "smps4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps5_reg: smps5 {
+ /* VDD_DDR */
+ regulator-name = "smps5";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ /* LDO1_OUT --> SDIO */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-allow-bypass;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-bypass;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDA_1V8_PHY */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+ };
+ };
+
+ tps65917_power_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps65917>;
+ interrupts = <1 IRQ_TYPE_NONE>;
+ wakeup-source;
+ ti,palmas-long-press-seconds = <6>;
+ };
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldo4_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldo4_reg>;
+};
+
+&dss {
+ vdda_video-supply = <&ldo5_reg>;
+};
+
+&mmc1 {
+ vqmmc-supply = <&ldo1_reg>;
+};
+
+&cpu0 {
+ vdd-supply = <&smps1_reg>;
+};
diff --git a/src/arm/ti/omap/dra72-evm.dts b/src/arm/ti/omap/dra72-evm.dts
new file mode 100644
index 0000000..5f62f92
--- /dev/null
+++ b/src/arm/ti/omap/dra72-evm.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
+/ {
+ model = "TI DRA722";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ipu2_memory_region: ipu2-memory@95800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x95800000 0x0 0x3800000>;
+ reusable;
+ status = "okay";
+ };
+
+ dsp1_memory_region: dsp1-memory@99000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x99000000 0x0 0x4000000>;
+ reusable;
+ status = "okay";
+ };
+
+ ipu1_memory_region: ipu1-memory@9d000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x9d000000 0x0 0x2000000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&smps4_reg>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&i2c1 {
+ tps65917: tps65917@58 {
+ reg = <0x58>;
+
+ interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
+ };
+};
+
+#include "dra72-evm-tps65917.dtsi"
+
+&hdmi {
+ vdda-supply = <&ldo3_reg>;
+};
+
+&pcf_gpio_21 {
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&mac_sw {
+ mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&davinci_mdio_sw {
+ ethphy0: ethernet-phy@3 {
+ reg = <3>;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev10>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev10_conf>;
+ vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev10>;
+ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>;
+ vmmc-supply = <&evm_1v8_sw>;
+};
+
+&ipu2 {
+ status = "okay";
+ memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+ status = "okay";
+ memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+ status = "okay";
+ memory-region = <&dsp1_memory_region>;
+};
diff --git a/src/arm/ti/omap/dra72x-mmc-iodelay.dtsi b/src/arm/ti/omap/dra72x-mmc-iodelay.dtsi
new file mode 100644
index 0000000..d006f1d
--- /dev/null
+++ b/src/arm/ti/omap/dra72x-mmc-iodelay.dtsi
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MMC IOdelay values for TI's DRA72x, DRA71x and AM571x SoCs.
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ * Datamanual revision that was used should be updated in comment below.
+ * If there is no update to datamanual, do not update the values. If you
+ * need to use values different from that recommended by the datamanual
+ * for your design, then you should consider adding values to the device-
+ * -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ * if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ * we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ * a revision tag to both the new and old entry. Use 'rev10' for PG 1.0,
+ * 'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ * to curb naming creativity and achieve consistency.
+ * e) If in future, DRA71x and DRA72x values differ, then add 'dra71_' and
+ * 'dra72_' tag to entries. Both the new and old entries should gain a tag.
+ *
+ * Datamanual Revisions:
+ *
+ * AM571x Silicon Revision 2.0: SPRS957D, Revised January 2017
+ * AM571x Silicon Revision 1.0: SPRS919M, Revised November 2017
+ * DRA71x : SPRS960B, Revised February 2017
+ */
+
+&dra7_pmx_core {
+ mmc1_pins_default: mmc1-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr12: mmc1-sdr12-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_hs: mmc1-hs-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr25: mmc1-sdr25-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr50: mmc1-sdr50-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_ddr50_rev10: mmc1-ddr50-rev10-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_clk.mmc1_clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
+ DRA7XX_CORE_IOPAD(0x375C, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
+ >;
+ };
+
+ mmc1_pins_ddr50_rev20: mmc1-ddr50-rev20-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr104: mmc1-sdr104-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs: mmc2-hs-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_ddr_rev10: mmc2-ddr-rev10-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ >;
+ };
+
+ mmc2_pins_ddr_rev20: mmc2-ddr-rev20-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs200: mmc2-hs200-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc4_pins_default: mmc4-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+};
+
+&dra7_iodelay_core {
+
+ /* Corresponds to MMC1_MANUAL1 in datamanual */
+ mmc1_iodelay_ddr50_conf: mmc1_iodelay_ddr50_conf {
+ pinctrl-pin-array = <
+ 0x618 A_DELAY_PS(588) G_DELAY_PS(0) /* CFG_MMC1_CLK_IN */
+ 0x624 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_CMD_IN */
+ 0x630 A_DELAY_PS(1375) G_DELAY_PS(0) /* CFG_MMC1_DAT0_IN */
+ 0x63C A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT1_IN */
+ 0x648 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT2_IN */
+ 0x654 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */
+ 0x620 A_DELAY_PS(1230) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */
+ 0x62C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x638 A_DELAY_PS(56) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x644 A_DELAY_PS(76) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x650 A_DELAY_PS(91) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x65C A_DELAY_PS(99) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x64C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC1_MANUAL2 in datamanual */
+ mmc1_iodelay_sdr104_rev10_conf: mmc1_iodelay_sdr104_rev10_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(560) G_DELAY_PS(365) /* CFG_MMC1_CLK_OUT */
+ 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x638 A_DELAY_PS(29) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x650 A_DELAY_PS(47) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x65c A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ 0x628 A_DELAY_PS(125) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x634 A_DELAY_PS(43) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x640 A_DELAY_PS(433) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x64c A_DELAY_PS(287) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x658 A_DELAY_PS(351) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC1_MANUAL2 in datamanual */
+ mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(520) G_DELAY_PS(320) /* CFG_MMC1_CLK_OUT */
+ 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x638 A_DELAY_PS(40) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x644 A_DELAY_PS(83) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x650 A_DELAY_PS(98) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x65c A_DELAY_PS(106) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ 0x628 A_DELAY_PS(51) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x640 A_DELAY_PS(363) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x64c A_DELAY_PS(199) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x658 A_DELAY_PS(273) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC2_MANUAL1 in datamanual */
+ mmc2_iodelay_ddr_conf: mmc2_iodelay_ddr_conf {
+ pinctrl-pin-array = <
+ 0x18c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_IN */
+ 0x1a4 A_DELAY_PS(119) G_DELAY_PS(0) /* CFG_GPMC_A20_IN */
+ 0x1b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_IN */
+ 0x1bc A_DELAY_PS(18) G_DELAY_PS(0) /* CFG_GPMC_A22_IN */
+ 0x1c8 A_DELAY_PS(894) G_DELAY_PS(0) /* CFG_GPMC_A23_IN */
+ 0x1d4 A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_GPMC_A24_IN */
+ 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */
+ 0x1ec A_DELAY_PS(23) G_DELAY_PS(0) /* CFG_GPMC_A26_IN */
+ 0x1f8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_IN */
+ 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */
+ 0x194 A_DELAY_PS(152) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1ac A_DELAY_PS(206) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b8 A_DELAY_PS(78) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c4 A_DELAY_PS(2) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(266) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f4 A_DELAY_PS(43) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x368 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC2_MANUAL3 in datamanual */
+ mmc2_iodelay_hs200_rev10_conf: mmc2_iodelay_hs200_rev10_conf {
+ pinctrl-pin-array = <
+ 0x194 A_DELAY_PS(150) G_DELAY_PS(95) /* CFG_GPMC_A19_OUT */
+ 0x1ac A_DELAY_PS(250) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b8 A_DELAY_PS(125) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c4 A_DELAY_PS(100) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(870) G_DELAY_PS(415) /* CFG_GPMC_A23_OUT */
+ 0x1dc A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e8 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f4 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x368 A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ 0x190 A_DELAY_PS(695) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x1a8 A_DELAY_PS(924) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1b4 A_DELAY_PS(719) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1c0 A_DELAY_PS(824) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1d8 A_DELAY_PS(877) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1e4 A_DELAY_PS(446) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1f0 A_DELAY_PS(847) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1fc A_DELAY_PS(586) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x364 A_DELAY_PS(1039) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC2_MANUAL3 in datamanual */
+ mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf {
+ pinctrl-pin-array = <
+ 0x194 A_DELAY_PS(285) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1ac A_DELAY_PS(189) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b8 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_OUT */
+ 0x1c4 A_DELAY_PS(0) G_DELAY_PS(70) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(730) G_DELAY_PS(360) /* CFG_GPMC_A23_OUT */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f4 A_DELAY_PS(70) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x368 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_CS1_OUT */
+ 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x1a8 A_DELAY_PS(231) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1b4 A_DELAY_PS(39) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1c0 A_DELAY_PS(91) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1d8 A_DELAY_PS(176) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1f0 A_DELAY_PS(101) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x364 A_DELAY_PS(360) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/dra72x.dtsi b/src/arm/ti/omap/dra72x.dtsi
new file mode 100644
index 0000000..9061726
--- /dev/null
+++ b/src/arm/ti/omap/dra72x.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Based on "omap4.dtsi"
+ */
+
+#include "dra7.dtsi"
+
+/ {
+ compatible = "ti,dra722", "ti,dra72", "ti,dra7";
+
+ aliases {
+ rproc0 = &ipu1;
+ rproc1 = &ipu2;
+ rproc2 = &dsp1;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupt-parent = <&wakeupgen>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&l4_per2 {
+ target-module@5b000 { /* 0x4845b000, ap 59 46.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x5b000 0x4>,
+ <0x5b010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5b000 0x1000>;
+
+ cal: cal@0 {
+ compatible = "ti,dra72-cal";
+ reg = <0x0000 0x400>,
+ <0x0800 0x40>,
+ <0x0900 0x40>;
+ reg-names = "cal_top",
+ "cal_rx_core0",
+ "cal_rx_core1";
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ ti,camerrx-control = <&scm_conf 0xE94>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi2_0: port@0 {
+ reg = <0>;
+ };
+ csi2_1: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+ };
+};
+
+&dss {
+ reg = <0 0x80>,
+ <0x4054 0x4>,
+ <0x4300 0x20>;
+ reg-names = "dss", "pll1_clkctrl", "pll1";
+
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>;
+ clock-names = "fck", "video1_clk";
+};
+
+&mailbox5 {
+ mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
+ ti,mbox-tx = <6 2 2>;
+ ti,mbox-rx = <4 2 2>;
+ status = "disabled";
+ };
+ mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
+ ti,mbox-tx = <5 2 2>;
+ ti,mbox-rx = <1 2 2>;
+ status = "disabled";
+ };
+};
+
+&mailbox6 {
+ mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
+ ti,mbox-tx = <6 2 2>;
+ ti,mbox-rx = <4 2 2>;
+ status = "disabled";
+ };
+};
+
+&pcie1_rc {
+ compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
+};
+
+&pcie1_ep {
+ compatible = "ti,dra726-pcie-ep", "ti,dra7-pcie-ep";
+};
+
+&pcie2_rc {
+ compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
+};
diff --git a/src/arm/ti/omap/dra74-ipu-dsp-common.dtsi b/src/arm/ti/omap/dra74-ipu-dsp-common.dtsi
new file mode 100644
index 0000000..3256631
--- /dev/null
+++ b/src/arm/ti/omap/dra74-ipu-dsp-common.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common IPU and DSP data for TI DRA74x/DRA76x/AM572x/AM574x platforms
+ */
+
+#include "dra7-ipu-dsp-common.dtsi"
+
+&mailbox6 {
+ mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
+ status = "okay";
+ };
+};
+
+&dsp2 {
+ mboxes = <&mailbox6 &mbox_dsp2_ipc3x>;
+ ti,timers = <&timer6>;
+ ti,watchdog-timers = <&timer13>;
+};
diff --git a/src/arm/ti/omap/dra74x-mmc-iodelay.dtsi b/src/arm/ti/omap/dra74x-mmc-iodelay.dtsi
new file mode 100644
index 0000000..e2fdb07
--- /dev/null
+++ b/src/arm/ti/omap/dra74x-mmc-iodelay.dtsi
@@ -0,0 +1,639 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MMC IOdelay values for TI's DRA74x, DRA75x and AM572x SoCs.
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ * Datamanual revision that was used should be updated in comment below.
+ * If there is no update to datamanual, do not update the values. If you
+ * need to use values different from that recommended by the datamanual
+ * for your design, then you should consider adding values to the device-
+ * -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ * if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ * we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ * a revision tag to both the new and old entry. Use 'rev11' for PG 1.1,
+ * 'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ * to curb naming creativity and achieve consistency.
+ *
+ * Datamanual Revisions:
+ *
+ * AM572x Silicon Revision 2.0: SPRS953F, Revised May 2019
+ * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016
+ *
+ */
+
+&dra7_pmx_core {
+ mmc1_pins_default: mmc1-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr12: mmc1-sdr12-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_hs: mmc1-hs-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr25: mmc1-sdr25-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr50: mmc1-sdr50-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_ddr50: mmc1-ddr50-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr104: mmc1-sdr104-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs: mmc2-hs-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_ddr_3_3v_rev11: mmc2-ddr-3-3v-rev11-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_ddr_1_8v_rev11: mmc2-ddr-1-8v-rev11-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_ddr_rev20: mmc2-ddr-rev20-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs200: mmc2-hs200-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc4_pins_default: mmc4-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+
+ mmc4_pins_hs: mmc4-hs-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+
+ mmc3_pins_default: mmc3-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc3_pins_hs: mmc3-hs-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc3_pins_sdr12: mmc3-sdr12-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc3_pins_sdr25: mmc3-sdr25-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc3_pins_sdr50: mmc3-sdr50-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc4_pins_sdr12: mmc4-sdr12-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+
+ mmc4_pins_sdr25: mmc4-sdr25-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+};
+
+&dra7_iodelay_core {
+
+ /* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+ mmc1_iodelay_ddr_rev11_conf: mmc1_iodelay_ddr_rev11_conf {
+ pinctrl-pin-array = <
+ 0x618 A_DELAY_PS(572) G_DELAY_PS(540) /* CFG_MMC1_CLK_IN */
+ 0x620 A_DELAY_PS(1525) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */
+ 0x624 A_DELAY_PS(0) G_DELAY_PS(600) /* CFG_MMC1_CMD_IN */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62c A_DELAY_PS(55) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x630 A_DELAY_PS(403) G_DELAY_PS(120) /* CFG_MMC1_DAT0_IN */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x63c A_DELAY_PS(23) G_DELAY_PS(60) /* CFG_MMC1_DAT1_IN */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x648 A_DELAY_PS(25) G_DELAY_PS(60) /* CFG_MMC1_DAT2_IN */
+ 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x654 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+ mmc1_iodelay_ddr_rev20_conf: mmc1_iodelay_ddr50_rev20_conf {
+ pinctrl-pin-array = <
+ 0x618 A_DELAY_PS(1076) G_DELAY_PS(330) /* CFG_MMC1_CLK_IN */
+ 0x620 A_DELAY_PS(1271) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */
+ 0x624 A_DELAY_PS(722) G_DELAY_PS(0) /* CFG_MMC1_CMD_IN */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x630 A_DELAY_PS(751) G_DELAY_PS(0) /* CFG_MMC1_DAT0_IN */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(20) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x63C A_DELAY_PS(256) G_DELAY_PS(0) /* CFG_MMC1_DAT1_IN */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x648 A_DELAY_PS(263) G_DELAY_PS(0) /* CFG_MMC1_DAT2_IN */
+ 0x64C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x654 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+ mmc1_iodelay_sdr104_rev11_conf: mmc1_iodelay_sdr104_rev11_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(1063) G_DELAY_PS(17) /* CFG_MMC1_CLK_OUT */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62c A_DELAY_PS(23) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(2) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+ mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(600) G_DELAY_PS(400) /* CFG_MMC1_CLK_OUT */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+ mmc2_iodelay_hs200_rev11_conf: mmc2_iodelay_hs200_rev11_conf {
+ pinctrl-pin-array = <
+ 0x190 A_DELAY_PS(621) G_DELAY_PS(600) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(300) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1a8 A_DELAY_PS(739) G_DELAY_PS(600) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b4 A_DELAY_PS(812) G_DELAY_PS(600) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c0 A_DELAY_PS(954) G_DELAY_PS(600) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(60) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(1340) G_DELAY_PS(420) /* CFG_GPMC_A23_OUT */
+ 0x1d8 A_DELAY_PS(935) G_DELAY_PS(600) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e4 A_DELAY_PS(525) G_DELAY_PS(600) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f0 A_DELAY_PS(767) G_DELAY_PS(600) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(225) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1fc A_DELAY_PS(565) G_DELAY_PS(600) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(60) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x364 A_DELAY_PS(969) G_DELAY_PS(600) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(180) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+ mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf {
+ pinctrl-pin-array = <
+ 0x190 A_DELAY_PS(274) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(162) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1a8 A_DELAY_PS(401) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(73) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b4 A_DELAY_PS(465) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(115) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c0 A_DELAY_PS(633) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(47) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(935) G_DELAY_PS(280) /* CFG_GPMC_A23_OUT */
+ 0x1d8 A_DELAY_PS(621) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e4 A_DELAY_PS(183) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f0 A_DELAY_PS(467) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1fc A_DELAY_PS(262) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(46) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x364 A_DELAY_PS(684) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(76) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Correspnds to MMC2_DDR_3V3_MANUAL1 in datamanual */
+ mmc2_iodelay_ddr_3_3v_rev11_conf: mmc2_iodelay_ddr_3_3v_rev11_conf {
+ pinctrl-pin-array = <
+ 0x18c A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A19_IN */
+ 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(174) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1a4 A_DELAY_PS(265) G_DELAY_PS(360) /* CFG_GPMC_A20_IN */
+ 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(168) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b0 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_IN */
+ 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(136) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1bc A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A22_IN */
+ 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1c8 A_DELAY_PS(287) G_DELAY_PS(420) /* CFG_GPMC_A23_IN */
+ 0x1d0 A_DELAY_PS(879) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */
+ 0x1d4 A_DELAY_PS(144) G_DELAY_PS(240) /* CFG_GPMC_A24_IN */
+ 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */
+ 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(34) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1ec A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A26_IN */
+ 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1f8 A_DELAY_PS(120) G_DELAY_PS(180) /* CFG_GPMC_A27_IN */
+ 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */
+ 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(11) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC2_DDR_1V8_MANUAL1 in datamanual */
+ mmc2_iodelay_ddr_1_8v_rev11_conf: mmc2_iodelay_ddr_1_8v_rev11_conf {
+ pinctrl-pin-array = <
+ 0x18c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_IN */
+ 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(174) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1a4 A_DELAY_PS(274) G_DELAY_PS(240) /* CFG_GPMC_A20_IN */
+ 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(168) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b0 A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A21_IN */
+ 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(136) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1bc A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A22_IN */
+ 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1c8 A_DELAY_PS(514) G_DELAY_PS(360) /* CFG_GPMC_A23_IN */
+ 0x1d0 A_DELAY_PS(879) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */
+ 0x1d4 A_DELAY_PS(187) G_DELAY_PS(120) /* CFG_GPMC_A24_IN */
+ 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */
+ 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(34) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1ec A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A26_IN */
+ 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1f8 A_DELAY_PS(121) G_DELAY_PS(60) /* CFG_GPMC_A27_IN */
+ 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */
+ 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(11) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC3_MANUAL1 in datamanual */
+ mmc3_iodelay_manual1_rev20_conf: mmc3_iodelay_manual1_conf {
+ pinctrl-pin-array = <
+ 0x678 A_DELAY_PS(0) G_DELAY_PS(386) /* CFG_MMC3_CLK_IN */
+ 0x680 A_DELAY_PS(605) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */
+ 0x684 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */
+ 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */
+ 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */
+ 0x690 A_DELAY_PS(171) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */
+ 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */
+ 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */
+ 0x69c A_DELAY_PS(221) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */
+ 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */
+ 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */
+ 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */
+ 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */
+ 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */
+ 0x6b4 A_DELAY_PS(474) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */
+ 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */
+ 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC3_MANUAL1 in datamanual */
+ mmc3_iodelay_manual1_rev11_conf: mmc3_iodelay_manual1_conf {
+ pinctrl-pin-array = <
+ 0x678 A_DELAY_PS(406) G_DELAY_PS(0) /* CFG_MMC3_CLK_IN */
+ 0x680 A_DELAY_PS(659) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */
+ 0x684 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */
+ 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */
+ 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */
+ 0x690 A_DELAY_PS(130) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */
+ 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */
+ 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */
+ 0x69c A_DELAY_PS(169) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */
+ 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */
+ 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */
+ 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */
+ 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */
+ 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */
+ 0x6b4 A_DELAY_PS(457) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */
+ 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */
+ 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+ mmc4_iodelay_ds_rev11_conf: mmc4_iodelay_ds_rev11_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(96) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(582) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(391) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(561) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(588) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+ mmc4_iodelay_ds_rev20_conf: mmc4_iodelay_ds_rev20_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(307) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(785) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(613) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(683) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(835) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_MANUAL1 in datamanual */
+ mmc4_iodelay_sdr12_hs_sdr25_rev11_conf: mmc4_iodelay_sdr12_hs_sdr25_rev11_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(2651) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(1572) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(1913) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(1721) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(1891) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(1919) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_MANUAL1 in datamanual */
+ mmc4_iodelay_sdr12_hs_sdr25_rev20_conf: mmc4_iodelay_sdr12_hs_sdr25_rev20_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(1147) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(1834) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(2165) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(1929) G_DELAY_PS(64) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(1935) G_DELAY_PS(128) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(2172) G_DELAY_PS(44) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/dra74x-p.dtsi b/src/arm/ti/omap/dra74x-p.dtsi
new file mode 100644
index 0000000..006189d
--- /dev/null
+++ b/src/arm/ti/omap/dra74x-p.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dra74x.dtsi"
+
+/ {
+ compatible = "ti,dra762", "ti,dra7";
+
+ ocp {
+ emif1: emif@4c000000 {
+ compatible = "ti,emif-dra7xx";
+ reg = <0x4c000000 0x200>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+};
+
+/* MCAN interrupts are hard-wired to irqs 67, 68 */
+&crossbar_mpu {
+ ti,irqs-skip = <10 67 68 133 139 140>;
+};
diff --git a/src/arm/ti/omap/dra74x.dtsi b/src/arm/ti/omap/dra74x.dtsi
new file mode 100644
index 0000000..cfb39dd
--- /dev/null
+++ b/src/arm/ti/omap/dra74x.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Based on "omap4.dtsi"
+ */
+
+#include "dra7.dtsi"
+
+/ {
+ compatible = "ti,dra742", "ti,dra74", "ti,dra7";
+
+ cpus {
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ operating-points-v2 = <&cpu0_opp_table>;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+
+ /* cooling options */
+ #cooling-cells = <2>; /* min followed by max */
+
+ vbb-supply = <&abb_mpu>;
+ };
+ };
+
+ aliases {
+ rproc0 = &ipu1;
+ rproc1 = &ipu2;
+ rproc2 = &dsp1;
+ rproc3 = &dsp2;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupt-parent = <&wakeupgen>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ocp {
+ dsp2_system: dsp_system@41500000 {
+ compatible = "syscon";
+ reg = <0x41500000 0x100>;
+ };
+
+
+ target-module@41501000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x41501000 0x4>,
+ <0x41501010 0x4>,
+ <0x41501014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp2 1>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x41501000 0x1000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu0_dsp2: mmu@0 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+ };
+ };
+
+ target-module@41502000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x41502000 0x4>,
+ <0x41502010 0x4>,
+ <0x41502014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+
+ clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp2 1>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x41502000 0x1000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu1_dsp2: mmu@0 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+ };
+ };
+
+ dsp2: dsp@41000000 {
+ compatible = "ti,dra7-dsp";
+ reg = <0x41000000 0x48000>,
+ <0x41600000 0x8000>,
+ <0x41700000 0x8000>;
+ reg-names = "l2ram", "l1pram", "l1dram";
+ ti,bootreg = <&scm_conf 0x560 10>;
+ iommus = <&mmu0_dsp2>, <&mmu1_dsp2>;
+ status = "disabled";
+ resets = <&prm_dsp2 0>;
+ clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+ firmware-name = "dra7-dsp2-fw.xe66";
+ };
+ };
+};
+
+&cpu0_opp_table {
+ opp-shared;
+};
+
+&dss {
+ reg = <0 0x80>,
+ <0x4054 0x4>,
+ <0x4300 0x20>,
+ <0x9054 0x4>,
+ <0x9300 0x20>;
+ reg-names = "dss", "pll1_clkctrl", "pll1",
+ "pll2_clkctrl", "pll2";
+
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 13>;
+ clock-names = "fck", "video1_clk", "video2_clk";
+};
+
+&mailbox5 {
+ mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
+ ti,mbox-tx = <6 2 2>;
+ ti,mbox-rx = <4 2 2>;
+ status = "disabled";
+ };
+ mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
+ ti,mbox-tx = <5 2 2>;
+ ti,mbox-rx = <1 2 2>;
+ status = "disabled";
+ };
+};
+
+&mailbox6 {
+ mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
+ ti,mbox-tx = <6 2 2>;
+ ti,mbox-rx = <4 2 2>;
+ status = "disabled";
+ };
+ mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
+ ti,mbox-tx = <5 2 2>;
+ ti,mbox-rx = <1 2 2>;
+ status = "disabled";
+ };
+};
+
+&pcie1_rc {
+ compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
+};
+
+&pcie1_ep {
+ compatible = "ti,dra746-pcie-ep", "ti,dra7-pcie-ep";
+};
+
+&pcie2_rc {
+ compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
+};
+
+&l4_per3 {
+ segment@0 {
+ usb4_tm: target-module@140000 { /* 0x48940000, ap 75 3c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x140000 0x4>,
+ <0x140010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+ clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x140000 0x20000>;
+
+ omap_dwc3_4: omap_dwc3_4@0 {
+ compatible = "ti,dwc3";
+ reg = <0 0x10000>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges;
+ status = "disabled";
+ usb4: usb@10000 {
+ compatible = "snps,dwc3";
+ reg = <0x10000 0x17000>;
+ interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ };
+ };
+ };
+ };
+};
diff --git a/src/arm/ti/omap/dra76-evm.dts b/src/arm/ti/omap/dra76-evm.dts
new file mode 100644
index 0000000..57868ac
--- /dev/null
+++ b/src/arm/ti/omap/dra76-evm.dts
@@ -0,0 +1,567 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "dra76x.dtsi"
+#include "dra7-evm-common.dtsi"
+#include "dra76x-mmc-iodelay.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+ model = "TI DRA762 EVM";
+ compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7";
+
+ aliases {
+ display0 = &hdmi0;
+
+ sound0 = &sound0;
+ sound1 = &hdmi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ipu2_cma_pool: ipu2_cma@95800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x95800000 0x0 0x3800000>;
+ reusable;
+ status = "okay";
+ };
+
+ dsp1_cma_pool: dsp1_cma@99000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x99000000 0x0 0x4000000>;
+ reusable;
+ status = "okay";
+ };
+
+ ipu1_cma_pool: ipu1_cma@9d000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x9d000000 0x0 0x2000000>;
+ reusable;
+ status = "okay";
+ };
+
+ dsp2_cma_pool: dsp2_cma@9f000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x9f000000 0x0 0x800000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
+ vsys_12v0: fixedregulator-vsys12v0 {
+ /* main supply */
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_12v0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vsys_5v0: fixedregulator-vsys5v0 {
+ /* Output of Cntlr B of TPS43351-Q1 on dra76-evm */
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vsys_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vio_3v6: fixedregulator-vio_3v6 {
+ compatible = "regulator-fixed";
+ regulator-name = "vio_3v6";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+ vin-supply = <&vsys_5v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vsys_3v3: fixedregulator-vsys3v3 {
+ /* Output of Cntlr A of TPS43351-Q1 on dra76-evm */
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vsys_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vio_3v3: fixedregulator-vio_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vio_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vsys_3v3>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vio_3v3_sd: fixedregulator-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "vio_3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vio_3v3>;
+ enable-active-high;
+ gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ vio_1v8: fixedregulator-vio_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&smps5_reg>;
+ };
+
+ vmmcwl_fixed: fixedregulator-mmcwl {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcwl_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio5 8 0>; /* gpio5_8 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ vtt_fixed: fixedregulator-vtt {
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_fixed";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ vin-supply = <&vsys_3v3>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ aic_dvdd: fixedregulator-aic_dvdd {
+ /* TPS77018DBVT */
+ compatible = "regulator-fixed";
+ regulator-name = "aic_dvdd";
+ vin-supply = <&vio_3v3>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ hdmi0: connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+
+ tpd12s015: encoder {
+ compatible = "ti,tpd12s015";
+
+ gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>, /* gpio7_30, CT CP HPD */
+ <&gpio7 31 GPIO_ACTIVE_HIGH>, /* gpio7_31, LS OE */
+ <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps65917: tps65917@58 {
+ compatible = "ti,tps65917";
+ reg = <0x58>;
+ ti,system-power-controller;
+ ti,palmas-override-powerhold;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ tps65917_pmic {
+ compatible = "ti,tps65917-pmic";
+
+ smps12-in-supply = <&vsys_3v3>;
+ smps3-in-supply = <&vsys_3v3>;
+ smps4-in-supply = <&vsys_3v3>;
+ smps5-in-supply = <&vsys_3v3>;
+ ldo1-in-supply = <&vsys_3v3>;
+ ldo2-in-supply = <&vsys_3v3>;
+ ldo3-in-supply = <&vsys_5v0>;
+ ldo4-in-supply = <&vsys_5v0>;
+ ldo5-in-supply = <&vsys_3v3>;
+
+ tps65917_regulators: regulators {
+ smps12_reg: smps12 {
+ /* VDD_DSPEVE */
+ regulator-name = "smps12";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps3_reg: smps3 {
+ /* VDD_CORE */
+ regulator-name = "smps3";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ smps4_reg: smps4 {
+ /* VDD_IVA */
+ regulator-name = "smps4";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps5_reg: smps5 {
+ /* VDDS1V8 */
+ regulator-name = "smps5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ /* LDO1_OUT --> VDA_PHY1_1V8 */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-allow-bypass;
+ };
+
+ ldo2_reg: ldo2 {
+ /* LDO2_OUT --> VDA_PHY2_1V8 */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-bypass;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDA_USB_3V3 */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ /* VDD_SDIO_DV */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ tps65917_power_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps65917>;
+ interrupts = <1 IRQ_TYPE_NONE>;
+ wakeup-source;
+ ti,palmas-long-press-seconds = <6>;
+ };
+ };
+
+ lp87565: lp87565@60 {
+ compatible = "ti,lp87565-q1";
+ reg = <0x60>;
+
+ buck10-in-supply =<&vsys_3v3>;
+ buck23-in-supply =<&vsys_3v3>;
+
+ regulators: regulators {
+ buck10_reg: buck10 {
+ /*VDD_MPU*/
+ regulator-name = "buck10";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck23_reg: buck23 {
+ /* VDD_GPU*/
+ regulator-name = "buck23";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ pcf_lcd: pcf8757@20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ pcf_gpio_21: pcf8757@21 {
+ compatible = "nxp,pcf8575";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcf_hdmi: pcf8575@26 {
+ compatible = "nxp,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ hdmi-audio-hog {
+ /* vin6_sel_s0: high: VIN6, low: audio */
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "vin6_sel_s0";
+ };
+ };
+
+ tlv320aic3106: tlv320aic3106@19 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x19>;
+ adc-settle-ms = <40>;
+ ai3x-micbias-vg = <1>; /* 2.0V */
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&vio_3v3>;
+ IOVDD-supply = <&vio_3v3>;
+ DRVDD-supply = <&vio_3v3>;
+ DVDD-supply = <&aic_dvdd>;
+ };
+};
+
+&cpu0 {
+ vdd-supply = <&buck10_reg>;
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vio_3v3_sd>;
+ vqmmc-supply = <&ldo4_reg>;
+ bus-width = <4>;
+ /*
+ * SDCD signal is not being used here - using the fact that GPIO mode
+ * is always hardwired.
+ */
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "hs";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+};
+
+&mmc2 {
+ status = "okay";
+ vmmc-supply = <&vio_1v8>;
+ vqmmc-supply = <&vio_1v8>;
+ bus-width = <8>;
+ non-removable;
+ pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_default>;
+ pinctrl-2 = <&mmc2_pins_default>;
+ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_conf>;
+};
+
+&mmc4 {
+ status = "okay";
+ vmmc-supply = <&vio_3v6>;
+ vqmmc-supply = <&vmmcwl_fixed>;
+ pinctrl-names = "default", "hs", "sdr12", "sdr25";
+ pinctrl-0 = <&mmc4_pins_hs &mmc4_iodelay_default_conf>;
+ pinctrl-1 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+ pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+ pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+};
+
+/* No RTC on this device */
+&rtc {
+ status = "disabled";
+};
+
+&mac_sw {
+ status = "okay";
+};
+
+&cpsw_port1 {
+ phy-handle = <&dp83867_0>;
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <&dp83867_1>;
+ phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+ dp83867_0: ethernet-phy@2 {
+ reg = <2>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ ti,min-output-impedance;
+ ti,dp83867-rxctrl-strap-quirk;
+ };
+
+ dp83867_1: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ ti,min-output-impedance;
+ ti,dp83867-rxctrl-strap-quirk;
+ };
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldo3_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldo3_reg>;
+};
+
+&dss {
+ status = "okay";
+ vdda_video-supply = <&ldo5_reg>;
+};
+
+&hdmi {
+ status = "okay";
+
+ vdda-supply = <&ldo1_reg>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
+
+&qspi {
+ spi-max-frequency = <96000000>;
+ flash@0 {
+ spi-max-frequency = <96000000>;
+ };
+};
+
+&pcie2_phy {
+ status = "okay";
+};
+
+&pcie1_rc {
+ num-lanes = <2>;
+ phys = <&pcie1_phy>, <&pcie2_phy>;
+ phy-names = "pcie-phy0", "pcie-phy1";
+};
+
+&pcie1_ep {
+ num-lanes = <2>;
+ phys = <&pcie1_phy>, <&pcie2_phy>;
+ phy-names = "pcie-phy0", "pcie-phy1";
+};
+
+&extcon_usb1 {
+ vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+};
+
+&extcon_usb2 {
+ vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+};
+
+&m_can0 {
+ can-transceiver {
+ max-bitrate = <5000000>;
+ };
+};
+
+&ipu2 {
+ status = "okay";
+ memory-region = <&ipu2_cma_pool>;
+};
+
+&ipu1 {
+ status = "okay";
+ memory-region = <&ipu1_cma_pool>;
+};
+
+&dsp1 {
+ status = "okay";
+ memory-region = <&dsp1_cma_pool>;
+};
+
+&dsp2 {
+ status = "okay";
+ memory-region = <&dsp2_cma_pool>;
+};
diff --git a/src/arm/ti/omap/dra76x-mmc-iodelay.dtsi b/src/arm/ti/omap/dra76x-mmc-iodelay.dtsi
new file mode 100644
index 0000000..4690554
--- /dev/null
+++ b/src/arm/ti/omap/dra76x-mmc-iodelay.dtsi
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Texas Instruments
+// MMC IOdelay values for TI's DRA76x and AM576x SoCs.
+// Author: Sekhar Nori <nsekhar@ti.com>
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ * Datamanual revision that was used should be updated in comment below.
+ * If there is no update to datamanual, do not update the values. If you
+ * need to use values different from that recommended by the datamanual
+ * for your design, then you should consider adding values to the device-
+ * -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ * if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ * we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ * a revision tag to both the new and old entry. Use 'rev11' for PG 1.1,
+ * 'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ * to curb naming creativity and achieve consistency.
+ *
+ * Datamanual Revisions:
+ *
+ * DRA76x Silicon Revision 1.0: SPRS993E, Revised December 2018
+ *
+ */
+
+&dra7_pmx_core {
+ mmc1_pins_default: mmc1-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_hs: mmc1-hs-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr50: mmc1-sdr50-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_ddr50: mmc1-ddr50-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs200: mmc2-hs200-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc3_pins_default: mmc3-default-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc4_pins_hs: mmc4-hs-pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+};
+
+&dra7_iodelay_core {
+
+ /* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+ mmc1_iodelay_ddr_conf: mmc1_iodelay_ddr_conf {
+ pinctrl-pin-array = <
+ 0x618 A_DELAY_PS(489) G_DELAY_PS(0) /* CFG_MMC1_CLK_IN */
+ 0x624 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_IN */
+ 0x630 A_DELAY_PS(374) G_DELAY_PS(0) /* CFG_MMC1_DAT0_IN */
+ 0x63c A_DELAY_PS(31) G_DELAY_PS(0) /* CFG_MMC1_DAT1_IN */
+ 0x648 A_DELAY_PS(56) G_DELAY_PS(0) /* CFG_MMC1_DAT2_IN */
+ 0x654 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */
+ 0x620 A_DELAY_PS(1355) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(0) G_DELAY_PS(4) /* CFG_MMC1_DAT0_OUT */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+ mmc1_iodelay_sdr104_conf: mmc1_iodelay_sdr104_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(892) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+ mmc2_iodelay_hs200_conf: mmc2_iodelay_hs200_conf {
+ pinctrl-pin-array = <
+ 0x190 A_DELAY_PS(384) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(350) G_DELAY_PS(174) /* CFG_GPMC_A19_OUT */
+ 0x1a8 A_DELAY_PS(410) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(335) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b4 A_DELAY_PS(468) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(339) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c0 A_DELAY_PS(676) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(219) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154) /* CFG_GPMC_A23_OUT */
+ 0x1d8 A_DELAY_PS(640) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(150) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e4 A_DELAY_PS(356) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(150) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f0 A_DELAY_PS(579) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1fc A_DELAY_PS(435) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(236) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x364 A_DELAY_PS(759) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(372) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC3_MANUAL1 in datamanual */
+ mmc3_iodelay_manual1_conf: mmc3_iodelay_manual1_conf {
+ pinctrl-pin-array = <
+ 0x678 A_DELAY_PS(0) G_DELAY_PS(386) /* CFG_MMC3_CLK_IN */
+ 0x680 A_DELAY_PS(605) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */
+ 0x684 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */
+ 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */
+ 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */
+ 0x690 A_DELAY_PS(171) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */
+ 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */
+ 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */
+ 0x69c A_DELAY_PS(221) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */
+ 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */
+ 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */
+ 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */
+ 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */
+ 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */
+ 0x6b4 A_DELAY_PS(474) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */
+ 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */
+ 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC3_MANUAL2 in datamanual */
+ mmc3_iodelay_sdr50_conf: mmc3_iodelay_sdr50_conf {
+ pinctrl-pin-array = <
+ 0x678 A_DELAY_PS(852) G_DELAY_PS(0) /* CFG_MMC3_CLK_IN */
+ 0x680 A_DELAY_PS(94) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */
+ 0x684 A_DELAY_PS(122) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */
+ 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */
+ 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */
+ 0x690 A_DELAY_PS(91) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */
+ 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */
+ 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */
+ 0x69c A_DELAY_PS(57) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */
+ 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */
+ 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */
+ 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */
+ 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */
+ 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */
+ 0x6b4 A_DELAY_PS(375) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */
+ 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */
+ 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_MANUAL1 in datamanual */
+ mmc4_iodelay_manual1_conf: mmc4_iodelay_manual1_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(1147) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(1834) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(2165) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(1929) G_DELAY_PS(64) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(1935) G_DELAY_PS(128) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(2172) G_DELAY_PS(44) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+ mmc4_iodelay_default_conf: mmc4_iodelay_default_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(307) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(785) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(613) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(683) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(835) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/dra76x.dtsi b/src/arm/ti/omap/dra76x.dtsi
new file mode 100644
index 0000000..1045eb2
--- /dev/null
+++ b/src/arm/ti/omap/dra76x.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra74x.dtsi"
+
+/ {
+ compatible = "ti,dra762", "ti,dra7";
+
+ ocp {
+ target-module@42c01900 {
+ compatible = "ti,sysc-dra7-mcan", "ti,sysc";
+ ranges = <0x0 0x42c00000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x42c01900 0x4>,
+ <0x42c01904 0x4>,
+ <0x42c01908 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET |
+ SYSC_DRA7_MCAN_ENAWAKEUP)>;
+ ti,syss-mask = <1>;
+ clocks = <&wkupaon_clkctrl DRA7_WKUPAON_ADC_CLKCTRL 0>;
+ clock-names = "fck";
+
+ m_can0: mcan@1a00 {
+ compatible = "bosch,m_can";
+ reg = <0x1a00 0x4000>, <0x0 0x18FC>;
+ reg-names = "m_can", "message_ram";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&l3_iclk_div>, <&mcan_clk>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+ };
+ };
+ };
+
+};
+
+&l4_per3 {
+ target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x1b0000 0x4>,
+ <0x1b0010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1b0000 0x10000>;
+
+ cal: cal@0 {
+ compatible = "ti,dra76-cal";
+ reg = <0x0000 0x400>,
+ <0x0800 0x40>,
+ <0x0900 0x40>;
+ reg-names = "cal_top",
+ "cal_rx_core0",
+ "cal_rx_core1";
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ ti,camerrx-control = <&scm_conf 0x6dc>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi2_0: port@0 {
+ reg = <0>;
+ };
+ csi2_1: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+ };
+};
+
+&scm_conf_clocks {
+ dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&dpll_gmac_x2_ck>;
+ ti,max-div = <63>;
+ reg = <0x03fc>;
+ ti,bit-shift = <20>;
+ ti,latch-bit = <26>;
+ assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
+ assigned-clock-rates = <80000000>;
+ };
+
+ dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
+ reg = <0x3fc>;
+ ti,bit-shift = <29>;
+ ti,latch-bit = <26>;
+ assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+ assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
+ };
+
+ mcan_clk: mcan_clk@3fc {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+ ti,bit-shift = <27>;
+ reg = <0x3fc>;
+ };
+};
+
+&rtctarget {
+ status = "disabled";
+};
+
+&usb4_tm {
+ status = "disabled";
+};
+
+&mmc3 {
+ /* dra76x is not affected by i887 */
+ max-frequency = <96000000>;
+};
+
+&cpu0_opp_table {
+ opp-1800000000 {
+ /* OPP Plus */
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1250000 950000 1250000>,
+ <1250000 950000 1250000>;
+ opp-supported-hw = <0xFF 0x08>;
+ };
+};
+
+&opp_supply_mpu {
+ ti,efuse-settings = <
+ /* uV offset */
+ 1060000 0x0
+ 1160000 0x4
+ 1210000 0x8
+ 1250000 0xC
+ >;
+};
+
+&abb_mpu {
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1060000 0 0x0 0 0x02000000 0x01F00000
+ 1160000 0 0x4 0 0x02000000 0x01F00000
+ 1210000 0 0x8 0 0x02000000 0x01F00000
+ 1250000 0 0xC 0 0x02000000 0x01F00000
+ >;
+};
diff --git a/src/arm/ti/omap/dra7xx-clocks.dtsi b/src/arm/ti/omap/dra7xx-clocks.dtsi
new file mode 100644
index 0000000..04a7a6d
--- /dev/null
+++ b/src/arm/ti/omap/dra7xx-clocks.dtsi
@@ -0,0 +1,2094 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for DRA7xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&cm_core_aon_clocks {
+ atl_clkin0_ck: clock-atl-clkin0 {
+ #clock-cells = <0>;
+ compatible = "ti,dra7-atl-clock";
+ clock-output-names = "atl_clkin0_ck";
+ clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
+ };
+
+ atl_clkin1_ck: clock-atl-clkin1 {
+ #clock-cells = <0>;
+ compatible = "ti,dra7-atl-clock";
+ clock-output-names = "atl_clkin1_ck";
+ clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
+ };
+
+ atl_clkin2_ck: clock-atl-clkin2 {
+ #clock-cells = <0>;
+ compatible = "ti,dra7-atl-clock";
+ clock-output-names = "atl_clkin2_ck";
+ clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
+ };
+
+ atl_clkin3_ck: clock-atl-clkin3 {
+ #clock-cells = <0>;
+ compatible = "ti,dra7-atl-clock";
+ clock-output-names = "atl_clkin3_ck";
+ clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
+ };
+
+ hdmi_clkin_ck: clock-hdmi-clkin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "hdmi_clkin_ck";
+ clock-frequency = <0>;
+ };
+
+ mlb_clkin_ck: clock-mlb-clkin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "mlb_clkin_ck";
+ clock-frequency = <0>;
+ };
+
+ mlbp_clkin_ck: clock-mlbp-clkin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "mlbp_clkin_ck";
+ clock-frequency = <0>;
+ };
+
+ pciesref_acs_clk_ck: clock-pciesref-acs {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "pciesref_acs_clk_ck";
+ clock-frequency = <100000000>;
+ };
+
+ ref_clkin0_ck: clock-ref-clkin0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "ref_clkin0_ck";
+ clock-frequency = <0>;
+ };
+
+ ref_clkin1_ck: clock-ref-clkin1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "ref_clkin1_ck";
+ clock-frequency = <0>;
+ };
+
+ ref_clkin2_ck: clock-ref-clkin2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "ref_clkin2_ck";
+ clock-frequency = <0>;
+ };
+
+ ref_clkin3_ck: clock-ref-clkin3 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "ref_clkin3_ck";
+ clock-frequency = <0>;
+ };
+
+ rmii_clk_ck: clock-rmii {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "rmii_clk_ck";
+ clock-frequency = <0>;
+ };
+
+ sdvenc_clkin_ck: clock-sdvenc-clkin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "sdvenc_clkin_ck";
+ clock-frequency = <0>;
+ };
+
+ secure_32k_clk_src_ck: clock-secure-32k-clk-src {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "secure_32k_clk_src_ck";
+ clock-frequency = <32768>;
+ };
+
+ sys_clk32_crystal_ck: clock-sys-clk32-crystal {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "sys_clk32_crystal_ck";
+ clock-frequency = <32768>;
+ };
+
+ sys_clk32_pseudo_ck: clock-sys-clk32-pseudo {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "sys_clk32_pseudo_ck";
+ clocks = <&sys_clkin1>;
+ clock-mult = <1>;
+ clock-div = <610>;
+ };
+
+ virt_12000000_ck: clock-virt-12000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_12000000_ck";
+ clock-frequency = <12000000>;
+ };
+
+ virt_13000000_ck: clock-virt-13000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_13000000_ck";
+ clock-frequency = <13000000>;
+ };
+
+ virt_16800000_ck: clock-virt-16800000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_16800000_ck";
+ clock-frequency = <16800000>;
+ };
+
+ virt_19200000_ck: clock-virt-19200000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_19200000_ck";
+ clock-frequency = <19200000>;
+ };
+
+ virt_20000000_ck: clock-virt-20000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_20000000_ck";
+ clock-frequency = <20000000>;
+ };
+
+ virt_26000000_ck: clock-virt-26000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_26000000_ck";
+ clock-frequency = <26000000>;
+ };
+
+ virt_27000000_ck: clock-virt-27000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_27000000_ck";
+ clock-frequency = <27000000>;
+ };
+
+ virt_38400000_ck: clock-virt-38400000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_38400000_ck";
+ clock-frequency = <38400000>;
+ };
+
+ sys_clkin2: clock-sys-clkin2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "sys_clkin2";
+ clock-frequency = <22579200>;
+ };
+
+ usb_otg_clkin_ck: clock-usb-otg-clkin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "usb_otg_clkin_ck";
+ clock-frequency = <0>;
+ };
+
+ video1_clkin_ck: clock-video1-clkin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "video1_clkin_ck";
+ clock-frequency = <0>;
+ };
+
+ video1_m2_clkin_ck: clock-video1-m2-clkin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "video1_m2_clkin_ck";
+ clock-frequency = <0>;
+ };
+
+ video2_clkin_ck: clock-video2-clkin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "video2_clkin_ck";
+ clock-frequency = <0>;
+ };
+
+ video2_m2_clkin_ck: clock-video2-m2-clkin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "video2_m2_clkin_ck";
+ clock-frequency = <0>;
+ };
+
+ dpll_abe_ck: clock@1e0 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-m4xen-clock";
+ clock-output-names = "dpll_abe_ck";
+ clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
+ reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+ };
+
+ dpll_abe_x2_ck: clock-dpll-abe-x2 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_abe_x2_ck";
+ clocks = <&dpll_abe_ck>;
+ };
+
+ dpll_abe_m2x2_ck: clock-dpll-abe-m2x2-8@1f0 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_abe_m2x2_ck";
+ clocks = <&dpll_abe_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x01f0>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ abe_clk: clock-abe@108 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "abe_clk";
+ clocks = <&dpll_abe_m2x2_ck>;
+ ti,max-div = <4>;
+ reg = <0x0108>;
+ ti,index-power-of-two;
+ };
+
+ dpll_abe_m2_ck: clock-dpll-abe-m2-8@1f0 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_abe_m2_ck";
+ clocks = <&dpll_abe_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x01f0>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_abe_m3x2_ck: clock-dpll-abe-m3x2-8@1f4 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_abe_m3x2_ck";
+ clocks = <&dpll_abe_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x01f4>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_core_byp_mux: clock-dpll-core-byp-mux-23@12c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_core_byp_mux";
+ clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+ ti,bit-shift = <23>;
+ reg = <0x012c>;
+ };
+
+ dpll_core_ck: clock@120 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-core-clock";
+ clock-output-names = "dpll_core_ck";
+ clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
+ reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+ };
+
+ dpll_core_x2_ck: clock-dpll-core-x2 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_core_x2_ck";
+ clocks = <&dpll_core_ck>;
+ };
+
+ dpll_core_h12x2_ck: clock-dpll-core-h12x2-8@13c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h12x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <63>;
+ ti,autoidle-shift = <8>;
+ reg = <0x013c>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ mpu_dpll_hs_clk_div: clock-mpu-dpll-hs-clk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "mpu_dpll_hs_clk_div";
+ clocks = <&dpll_core_h12x2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll_mpu_ck: clock@160 {
+ #clock-cells = <0>;
+ compatible = "ti,omap5-mpu-dpll-clock";
+ clock-output-names = "dpll_mpu_ck";
+ clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
+ reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+ };
+
+ dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@170 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_mpu_m2_ck";
+ clocks = <&dpll_mpu_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0170>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ mpu_dclk_div: clock-mpu-dclk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "mpu_dclk_div";
+ clocks = <&dpll_mpu_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dsp_dpll_hs_clk_div: clock-dsp-dpll-hs-clk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dsp_dpll_hs_clk_div";
+ clocks = <&dpll_core_h12x2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll_dsp_byp_mux: clock-dpll-dsp-byp-mux-23@240 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_dsp_byp_mux";
+ clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+ ti,bit-shift = <23>;
+ reg = <0x0240>;
+ };
+
+ dpll_dsp_ck: clock@234 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_dsp_ck";
+ clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
+ reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
+ assigned-clocks = <&dpll_dsp_ck>;
+ assigned-clock-rates = <600000000>;
+ };
+
+ dpll_dsp_m2_ck: clock-dpll-dsp-m2-8@244 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_dsp_m2_ck";
+ clocks = <&dpll_dsp_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0244>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ assigned-clocks = <&dpll_dsp_m2_ck>;
+ assigned-clock-rates = <600000000>;
+ };
+
+ iva_dpll_hs_clk_div: clock-iva-dpll-hs-clk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "iva_dpll_hs_clk_div";
+ clocks = <&dpll_core_h12x2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll_iva_byp_mux: clock-dpll-iva-byp-mux-23@1ac {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_iva_byp_mux";
+ clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+ ti,bit-shift = <23>;
+ reg = <0x01ac>;
+ };
+
+ dpll_iva_ck: clock@1a0 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_iva_ck";
+ clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
+ reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+ assigned-clocks = <&dpll_iva_ck>;
+ assigned-clock-rates = <1165000000>;
+ };
+
+ dpll_iva_m2_ck: clock-dpll-iva-m2-8@1b0 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_iva_m2_ck";
+ clocks = <&dpll_iva_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x01b0>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ assigned-clocks = <&dpll_iva_m2_ck>;
+ assigned-clock-rates = <388333334>;
+ };
+
+ iva_dclk: clock-iva-dclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "iva_dclk";
+ clocks = <&dpll_iva_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll_gpu_byp_mux: clock-dpll-gpu-byp-mux-23@2e4 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_gpu_byp_mux";
+ clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+ ti,bit-shift = <23>;
+ reg = <0x02e4>;
+ };
+
+ dpll_gpu_ck: clock@2d8 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_gpu_ck";
+ clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
+ reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
+ assigned-clocks = <&dpll_gpu_ck>;
+ assigned-clock-rates = <1277000000>;
+ };
+
+ dpll_gpu_m2_ck: clock-dpll-gpu-m2-8@2e8 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_gpu_m2_ck";
+ clocks = <&dpll_gpu_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x02e8>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ assigned-clocks = <&dpll_gpu_m2_ck>;
+ assigned-clock-rates = <425666667>;
+ };
+
+ dpll_core_m2_ck: clock-dpll-core-m2-8@130 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m2_ck";
+ clocks = <&dpll_core_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0130>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ core_dpll_out_dclk_div: clock-core-dpll-out-dclk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "core_dpll_out_dclk_div";
+ clocks = <&dpll_core_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll_ddr_byp_mux: clock-dpll-ddr-byp-mux-23@21c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_ddr_byp_mux";
+ clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+ ti,bit-shift = <23>;
+ reg = <0x021c>;
+ };
+
+ dpll_ddr_ck: clock@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_ddr_ck";
+ clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
+ reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
+ };
+
+ dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@220 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_ddr_m2_ck";
+ clocks = <&dpll_ddr_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0220>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_gmac_byp_mux: clock-dpll-gmac-byp-mux-23@2b4 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_gmac_byp_mux";
+ clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+ ti,bit-shift = <23>;
+ reg = <0x02b4>;
+ };
+
+ dpll_gmac_ck: clock@2a8 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_gmac_ck";
+ clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
+ reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
+ };
+
+ dpll_gmac_m2_ck: clock-dpll-gmac-m2-8@2b8 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_gmac_m2_ck";
+ clocks = <&dpll_gmac_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x02b8>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ video2_dclk_div: clock-video2-dclk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "video2_dclk_div";
+ clocks = <&video2_m2_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ video1_dclk_div: clock-video1-dclk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "video1_dclk_div";
+ clocks = <&video1_m2_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ hdmi_dclk_div: clock-hdmi-dclk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "hdmi_dclk_div";
+ clocks = <&hdmi_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ per_dpll_hs_clk_div: clock-per-dpll-hs-clk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "per_dpll_hs_clk_div";
+ clocks = <&dpll_abe_m3x2_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ usb_dpll_hs_clk_div: clock-usb-dpll-hs-clk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "usb_dpll_hs_clk_div";
+ clocks = <&dpll_abe_m3x2_ck>;
+ clock-mult = <1>;
+ clock-div = <3>;
+ };
+
+ eve_dpll_hs_clk_div: clock-eve-dpll-hs-clk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "eve_dpll_hs_clk_div";
+ clocks = <&dpll_core_h12x2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll_eve_byp_mux: clock-dpll-eve-byp-mux-23@290 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_eve_byp_mux";
+ clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+ ti,bit-shift = <23>;
+ reg = <0x0290>;
+ };
+
+ dpll_eve_ck: clock@284 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_eve_ck";
+ clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
+ reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
+ };
+
+ dpll_eve_m2_ck: clock-dpll-eve-m2-8@294 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_eve_m2_ck";
+ clocks = <&dpll_eve_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0294>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ eve_dclk_div: clock-eve-dclk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "eve_dclk_div";
+ clocks = <&dpll_eve_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll_core_h13x2_ck: clock-dpll-core-h13x2-8@140 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h13x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <63>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0140>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_core_h14x2_ck: clock-dpll-core-h14x2-8@144 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h14x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <63>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0144>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_core_h22x2_ck: clock-dpll-core-h22x2-8@154 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h22x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <63>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0154>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_core_h23x2_ck: clock-dpll-core-h23x2-8@158 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h23x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <63>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0158>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_core_h24x2_ck: clock-dpll-core-h24x2-8@15c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h24x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <63>;
+ ti,autoidle-shift = <8>;
+ reg = <0x015c>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_ddr_x2_ck: clock-dpll-ddr-x2 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_ddr_x2_ck";
+ clocks = <&dpll_ddr_ck>;
+ };
+
+ dpll_ddr_h11x2_ck: clock-dpll-ddr-h11x2-8@228 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_ddr_h11x2_ck";
+ clocks = <&dpll_ddr_x2_ck>;
+ ti,max-div = <63>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0228>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_dsp_x2_ck: clock-dpll-dsp-x2 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_dsp_x2_ck";
+ clocks = <&dpll_dsp_ck>;
+ };
+
+ dpll_dsp_m3x2_ck: clock-dpll-dsp-m3x2-8@248 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_dsp_m3x2_ck";
+ clocks = <&dpll_dsp_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0248>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ assigned-clocks = <&dpll_dsp_m3x2_ck>;
+ assigned-clock-rates = <400000000>;
+ };
+
+ dpll_gmac_x2_ck: clock-dpll-gmac-x2 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_gmac_x2_ck";
+ clocks = <&dpll_gmac_ck>;
+ };
+
+ dpll_gmac_h11x2_ck: clock-dpll-gmac-h11x2-8@2c0 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_gmac_h11x2_ck";
+ clocks = <&dpll_gmac_x2_ck>;
+ ti,max-div = <63>;
+ ti,autoidle-shift = <8>;
+ reg = <0x02c0>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_gmac_h12x2_ck: clock-dpll-gmac-h12x2-8@2c4 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_gmac_h12x2_ck";
+ clocks = <&dpll_gmac_x2_ck>;
+ ti,max-div = <63>;
+ ti,autoidle-shift = <8>;
+ reg = <0x02c4>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_gmac_h13x2_ck: clock-dpll-gmac-h13x2-8@2c8 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_gmac_h13x2_ck";
+ clocks = <&dpll_gmac_x2_ck>;
+ ti,max-div = <63>;
+ ti,autoidle-shift = <8>;
+ reg = <0x02c8>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_gmac_m3x2_ck: clock-dpll-gmac-m3x2-8@2bc {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_gmac_m3x2_ck";
+ clocks = <&dpll_gmac_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x02bc>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ gmii_m_clk_div: clock-gmii-m-clk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "gmii_m_clk_div";
+ clocks = <&dpll_gmac_h11x2_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ hdmi_clk2_div: clock-hdmi-clk2-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "hdmi_clk2_div";
+ clocks = <&hdmi_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ hdmi_div_clk: clock-hdmi-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "hdmi_div_clk";
+ clocks = <&hdmi_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ l3_iclk_div: clock-l3-iclk-div-4@100 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "l3_iclk_div";
+ ti,max-div = <2>;
+ ti,bit-shift = <4>;
+ reg = <0x0100>;
+ clocks = <&dpll_core_h12x2_ck>;
+ ti,index-power-of-two;
+ };
+
+ l4_root_clk_div: clock-l4-root-clk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "l4_root_clk_div";
+ clocks = <&l3_iclk_div>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ video1_clk2_div: clock-video1-clk2-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "video1_clk2_div";
+ clocks = <&video1_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ video1_div_clk: clock-video1-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "video1_div_clk";
+ clocks = <&video1_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ video2_clk2_div: clock-video2-clk2-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "video2_clk2_div";
+ clocks = <&video2_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ video2_div_clk: clock-video2-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "video2_div_clk";
+ clocks = <&video2_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dummy_ck: clock-dummy {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "dummy_ck";
+ clock-frequency = <0>;
+ };
+};
+&prm_clocks {
+ sys_clkin1: clock-sys-clkin1@110 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "sys_clkin1";
+ clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+ reg = <0x0110>;
+ ti,index-starts-at-one;
+ };
+
+ abe_dpll_sys_clk_mux: clock-abe-dpll-sys-clk-mux@118 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "abe_dpll_sys_clk_mux";
+ clocks = <&sys_clkin1>, <&sys_clkin2>;
+ reg = <0x0118>;
+ };
+
+ abe_dpll_bypass_clk_mux: clock-abe-dpll-bypass-clk-mux@114 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "abe_dpll_bypass_clk_mux";
+ clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
+ reg = <0x0114>;
+ };
+
+ abe_dpll_clk_mux: clock-abe-dpll-clk-mux@10c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "abe_dpll_clk_mux";
+ clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
+ reg = <0x010c>;
+ };
+
+ abe_24m_fclk: clock-abe-24m@11c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "abe_24m_fclk";
+ clocks = <&dpll_abe_m2x2_ck>;
+ reg = <0x011c>;
+ ti,dividers = <8>, <16>;
+ };
+
+ aess_fclk: clock-aess@178 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "aess_fclk";
+ clocks = <&abe_clk>;
+ reg = <0x0178>;
+ ti,max-div = <2>;
+ };
+
+ abe_giclk_div: clock-abe-giclk-div@174 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "abe_giclk_div";
+ clocks = <&aess_fclk>;
+ reg = <0x0174>;
+ ti,max-div = <2>;
+ };
+
+ abe_lp_clk_div: clock-abe-lp-clk-div@1d8 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "abe_lp_clk_div";
+ clocks = <&dpll_abe_m2x2_ck>;
+ reg = <0x01d8>;
+ ti,dividers = <16>, <32>;
+ };
+
+ abe_sys_clk_div: clock-abe-sys-clk-div@120 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "abe_sys_clk_div";
+ clocks = <&sys_clkin1>;
+ reg = <0x0120>;
+ ti,max-div = <2>;
+ };
+
+ adc_gfclk_mux: clock-adc-gfclk-mux@1dc {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "adc_gfclk_mux";
+ clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
+ reg = <0x01dc>;
+ };
+
+ sys_clk1_dclk_div: clock-sys-clk1-dclk-div@1c8 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "sys_clk1_dclk_div";
+ clocks = <&sys_clkin1>;
+ ti,max-div = <64>;
+ reg = <0x01c8>;
+ ti,index-power-of-two;
+ };
+
+ sys_clk2_dclk_div: clock-sys-clk2-dclk-div@1cc {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "sys_clk2_dclk_div";
+ clocks = <&sys_clkin2>;
+ ti,max-div = <64>;
+ reg = <0x01cc>;
+ ti,index-power-of-two;
+ };
+
+ per_abe_x1_dclk_div: clock-per-abe-x1-dclk-div@1bc {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "per_abe_x1_dclk_div";
+ clocks = <&dpll_abe_m2_ck>;
+ ti,max-div = <64>;
+ reg = <0x01bc>;
+ ti,index-power-of-two;
+ };
+
+ dsp_gclk_div: clock-dsp-gclk-div@18c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dsp_gclk_div";
+ clocks = <&dpll_dsp_m2_ck>;
+ ti,max-div = <64>;
+ reg = <0x018c>;
+ ti,index-power-of-two;
+ };
+
+ gpu_dclk: clock-gpu-dclk@1a0 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "gpu_dclk";
+ clocks = <&dpll_gpu_m2_ck>;
+ ti,max-div = <64>;
+ reg = <0x01a0>;
+ ti,index-power-of-two;
+ };
+
+ emif_phy_dclk_div: clock-emif-phy-dclk-div@190 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "emif_phy_dclk_div";
+ clocks = <&dpll_ddr_m2_ck>;
+ ti,max-div = <64>;
+ reg = <0x0190>;
+ ti,index-power-of-two;
+ };
+
+ gmac_250m_dclk_div: clock-gmac-250m-dclk-div@19c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "gmac_250m_dclk_div";
+ clocks = <&dpll_gmac_m2_ck>;
+ ti,max-div = <64>;
+ reg = <0x019c>;
+ ti,index-power-of-two;
+ };
+
+ gmac_main_clk: clock-gmac-main {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "gmac_main_clk";
+ clocks = <&gmac_250m_dclk_div>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ l3init_480m_dclk_div: clock-l3init-480m-dclk-div@1ac {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "l3init_480m_dclk_div";
+ clocks = <&dpll_usb_m2_ck>;
+ ti,max-div = <64>;
+ reg = <0x01ac>;
+ ti,index-power-of-two;
+ };
+
+ usb_otg_dclk_div: clock-usb-otg-dclk-div@184 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "usb_otg_dclk_div";
+ clocks = <&usb_otg_clkin_ck>;
+ ti,max-div = <64>;
+ reg = <0x0184>;
+ ti,index-power-of-two;
+ };
+
+ sata_dclk_div: clock-sata-dclk-div@1c0 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "sata_dclk_div";
+ clocks = <&sys_clkin1>;
+ ti,max-div = <64>;
+ reg = <0x01c0>;
+ ti,index-power-of-two;
+ };
+
+ pcie2_dclk_div: clock-pcie2-dclk-div@1b8 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "pcie2_dclk_div";
+ clocks = <&dpll_pcie_ref_m2_ck>;
+ ti,max-div = <64>;
+ reg = <0x01b8>;
+ ti,index-power-of-two;
+ };
+
+ pcie_dclk_div: clock-pcie-dclk-div@1b4 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "pcie_dclk_div";
+ clocks = <&apll_pcie_m2_ck>;
+ ti,max-div = <64>;
+ reg = <0x01b4>;
+ ti,index-power-of-two;
+ };
+
+ emu_dclk_div: clock-emu-dclk-div@194 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "emu_dclk_div";
+ clocks = <&sys_clkin1>;
+ ti,max-div = <64>;
+ reg = <0x0194>;
+ ti,index-power-of-two;
+ };
+
+ secure_32k_dclk_div: clock-secure-32k-dclk-div@1c4 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "secure_32k_dclk_div";
+ clocks = <&secure_32k_clk_src_ck>;
+ ti,max-div = <64>;
+ reg = <0x01c4>;
+ ti,index-power-of-two;
+ };
+
+ clkoutmux0_clk_mux: clock-clkoutmux0-clk-mux@158 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "clkoutmux0_clk_mux";
+ clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+ reg = <0x0158>;
+ };
+
+ clkoutmux1_clk_mux: clock-clkoutmux1-clk-mux@15c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "clkoutmux1_clk_mux";
+ clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+ reg = <0x015c>;
+ };
+
+ clkoutmux2_clk_mux: clock-clkoutmux2-clk-mux@160 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "clkoutmux2_clk_mux";
+ clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+ reg = <0x0160>;
+ };
+
+ custefuse_sys_gfclk_div: clock-custefuse-sys-gfclk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "custefuse_sys_gfclk_div";
+ clocks = <&sys_clkin1>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ eve_clk: clock-eve@180 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "eve_clk";
+ clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
+ reg = <0x0180>;
+ };
+
+ hdmi_dpll_clk_mux: clock-hdmi-dpll-clk-mux@164 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "hdmi_dpll_clk_mux";
+ clocks = <&sys_clkin1>, <&sys_clkin2>;
+ reg = <0x0164>;
+ };
+
+ mlb_clk: clock-mlb@134 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "mlb_clk";
+ clocks = <&mlb_clkin_ck>;
+ ti,max-div = <64>;
+ reg = <0x0134>;
+ ti,index-power-of-two;
+ };
+
+ mlbp_clk: clock-mlbp@130 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "mlbp_clk";
+ clocks = <&mlbp_clkin_ck>;
+ ti,max-div = <64>;
+ reg = <0x0130>;
+ ti,index-power-of-two;
+ };
+
+ per_abe_x1_gfclk2_div: clock-per-abe-x1-gfclk2-div@138 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "per_abe_x1_gfclk2_div";
+ clocks = <&dpll_abe_m2_ck>;
+ ti,max-div = <64>;
+ reg = <0x0138>;
+ ti,index-power-of-two;
+ };
+
+ timer_sys_clk_div: clock-timer-sys-clk-div@144 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "timer_sys_clk_div";
+ clocks = <&sys_clkin1>;
+ reg = <0x0144>;
+ ti,max-div = <2>;
+ };
+
+ video1_dpll_clk_mux: clock-video1-dpll-clk-mux@168 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "video1_dpll_clk_mux";
+ clocks = <&sys_clkin1>, <&sys_clkin2>;
+ reg = <0x0168>;
+ };
+
+ video2_dpll_clk_mux: clock-video2-dpll-clk-mux@16c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "video2_dpll_clk_mux";
+ clocks = <&sys_clkin1>, <&sys_clkin2>;
+ reg = <0x016c>;
+ };
+
+ wkupaon_iclk_mux: clock-wkupaon-iclk-mux@108 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "wkupaon_iclk_mux";
+ clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
+ reg = <0x0108>;
+ };
+};
+
+&cm_core_clocks {
+ dpll_pcie_ref_ck: clock@200 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_pcie_ref_ck";
+ clocks = <&sys_clkin1>, <&sys_clkin1>;
+ reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+ };
+
+ dpll_pcie_ref_m2ldo_ck: clock-dpll-pcie-ref-m2ldo-8@210 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_pcie_ref_m2ldo_ck";
+ clocks = <&dpll_pcie_ref_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0210>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ apll_pcie_in_clk_mux: clock-apll-pcie-in-clk-mux-7@4ae06118 {
+ compatible = "ti,mux-clock";
+ clock-output-names = "apll_pcie_in_clk_mux";
+ clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>;
+ #clock-cells = <0>;
+ reg = <0x021c 0x4>;
+ ti,bit-shift = <7>;
+ };
+
+ apll_pcie_ck: clock@21c {
+ #clock-cells = <0>;
+ compatible = "ti,dra7-apll-clock";
+ clock-output-names = "apll_pcie_ck";
+ clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
+ reg = <0x021c>, <0x0220>;
+ };
+
+ optfclk_pciephy_div: clock-optfclk-pciephy-div-8@4a00821c {
+ compatible = "ti,divider-clock";
+ clock-output-names = "optfclk_pciephy_div";
+ clocks = <&apll_pcie_ck>;
+ #clock-cells = <0>;
+ reg = <0x021c>;
+ ti,dividers = <2>, <1>;
+ ti,bit-shift = <8>;
+ ti,max-div = <2>;
+ };
+
+ apll_pcie_clkvcoldo: clock-apll-pcie-clkvcoldo {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "apll_pcie_clkvcoldo";
+ clocks = <&apll_pcie_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ apll_pcie_clkvcoldo_div: clock-apll-pcie-clkvcoldo-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "apll_pcie_clkvcoldo_div";
+ clocks = <&apll_pcie_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ apll_pcie_m2_ck: clock-apll-pcie-m2 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "apll_pcie_m2_ck";
+ clocks = <&apll_pcie_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll_per_byp_mux: clock-dpll-per-byp-mux-23@14c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_per_byp_mux";
+ clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+ ti,bit-shift = <23>;
+ reg = <0x014c>;
+ };
+
+ dpll_per_ck: clock@140 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_per_ck";
+ clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
+ reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+ };
+
+ dpll_per_m2_ck: clock-dpll-per-m2-8@150 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m2_ck";
+ clocks = <&dpll_per_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0150>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ func_96m_aon_dclk_div: clock-func-96m-aon-dclk-div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "func_96m_aon_dclk_div";
+ clocks = <&dpll_per_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll_usb_byp_mux: clock-dpll-usb-byp-mux-23@18c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_usb_byp_mux";
+ clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+ ti,bit-shift = <23>;
+ reg = <0x018c>;
+ };
+
+ dpll_usb_ck: clock@180 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-j-type-clock";
+ clock-output-names = "dpll_usb_ck";
+ clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
+ reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+ };
+
+ dpll_usb_m2_ck: clock-dpll-usb-m2-8@190 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_usb_m2_ck";
+ clocks = <&dpll_usb_ck>;
+ ti,max-div = <127>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0190>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_pcie_ref_m2_ck: clock-dpll-pcie-ref-m2-8@210 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_pcie_ref_m2_ck";
+ clocks = <&dpll_pcie_ref_ck>;
+ ti,max-div = <127>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0210>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_per_x2_ck: clock-dpll-per-x2 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_per_x2_ck";
+ clocks = <&dpll_per_ck>;
+ };
+
+ dpll_per_h11x2_ck: clock-dpll-per-h11x2-8@158 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_h11x2_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,max-div = <63>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0158>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_per_h12x2_ck: clock-dpll-per-h12x2-8@15c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_h12x2_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,max-div = <63>;
+ ti,autoidle-shift = <8>;
+ reg = <0x015c>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_per_h13x2_ck: clock-dpll-per-h13x2-8@160 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_h13x2_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,max-div = <63>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0160>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_per_h14x2_ck: clock-dpll-per-h14x2-8@164 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_h14x2_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,max-div = <63>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0164>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_per_m2x2_ck: clock-dpll-per-m2x2-8@150 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m2x2_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0150>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_usb_clkdcoldo: clock-dpll-usb-clkdcoldo {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_usb_clkdcoldo";
+ clocks = <&dpll_usb_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ func_128m_clk: clock-func-128m {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "func_128m_clk";
+ clocks = <&dpll_per_h11x2_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ func_12m_fclk: clock-func-12m-fclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "func_12m_fclk";
+ clocks = <&dpll_per_m2x2_ck>;
+ clock-mult = <1>;
+ clock-div = <16>;
+ };
+
+ func_24m_clk: clock-func-24m {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "func_24m_clk";
+ clocks = <&dpll_per_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ func_48m_fclk: clock-func-48m-fclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "func_48m_fclk";
+ clocks = <&dpll_per_m2x2_ck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ func_96m_fclk: clock-func-96m-fclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "func_96m_fclk";
+ clocks = <&dpll_per_m2x2_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ l3init_60m_fclk: clock-l3init-60m@104 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "l3init_60m_fclk";
+ clocks = <&dpll_usb_m2_ck>;
+ reg = <0x0104>;
+ ti,dividers = <1>, <8>;
+ };
+
+ clkout2_clk: clock-clkout2-8@6b0 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "clkout2_clk";
+ clocks = <&clkoutmux2_clk_mux>;
+ ti,bit-shift = <8>;
+ reg = <0x06b0>;
+ };
+
+ l3init_960m_gfclk: clock-l3init-960m-gfclk-8@6c0 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "l3init_960m_gfclk";
+ clocks = <&dpll_usb_clkdcoldo>;
+ ti,bit-shift = <8>;
+ reg = <0x06c0>;
+ };
+
+ usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@640 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "usb_phy1_always_on_clk32k";
+ clocks = <&sys_32k_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0640>;
+ };
+
+ usb_phy2_always_on_clk32k: clock-usb-phy2-always-on-clk32k-8@688 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "usb_phy2_always_on_clk32k";
+ clocks = <&sys_32k_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0688>;
+ };
+
+ usb_phy3_always_on_clk32k: clock-usb-phy3-always-on-clk32k-8@698 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "usb_phy3_always_on_clk32k";
+ clocks = <&sys_32k_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0698>;
+ };
+
+ gpu_core_gclk_mux: clock-gpu-core-gclk-mux-24@1220 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "gpu_core_gclk_mux";
+ clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
+ ti,bit-shift = <24>;
+ reg = <0x1220>;
+ assigned-clocks = <&gpu_core_gclk_mux>;
+ assigned-clock-parents = <&dpll_gpu_m2_ck>;
+ };
+
+ gpu_hyd_gclk_mux: clock-gpu-hyd-gclk-mux-26@1220 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "gpu_hyd_gclk_mux";
+ clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
+ ti,bit-shift = <26>;
+ reg = <0x1220>;
+ assigned-clocks = <&gpu_hyd_gclk_mux>;
+ assigned-clock-parents = <&dpll_gpu_m2_ck>;
+ };
+
+ l3instr_ts_gclk_div: clock-l3instr-ts-gclk-div-24@e50 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "l3instr_ts_gclk_div";
+ clocks = <&wkupaon_iclk_mux>;
+ ti,bit-shift = <24>;
+ reg = <0x0e50>;
+ ti,dividers = <8>, <16>, <32>;
+ };
+
+ vip1_gclk_mux: clock-vip1-gclk-mux-24@1020 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "vip1_gclk_mux";
+ clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+ ti,bit-shift = <24>;
+ reg = <0x1020>;
+ };
+
+ vip2_gclk_mux: clock-vip2-gclk-mux-24@1028 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "vip2_gclk_mux";
+ clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+ ti,bit-shift = <24>;
+ reg = <0x1028>;
+ };
+
+ vip3_gclk_mux: clock-vip3-gclk-mux-24@1030 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "vip3_gclk_mux";
+ clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+ ti,bit-shift = <24>;
+ reg = <0x1030>;
+ };
+};
+
+&cm_core_clockdomains {
+ coreaon_clkdm: clock-coreaon-clkdm {
+ compatible = "ti,clockdomain";
+ clock-output-names = "coreaon_clkdm";
+ clocks = <&dpll_usb_ck>;
+ };
+};
+
+&scm_conf_clocks {
+ dss_deshdcp_clk: clock-dss-deshdcp-0@558 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "dss_deshdcp_clk";
+ clocks = <&l3_iclk_div>;
+ ti,bit-shift = <0>;
+ reg = <0x558>;
+ };
+
+ ehrpwm0_tbclk: clock-ehrpwm0-tbclk-20@558 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm0_tbclk";
+ clocks = <&l4_root_clk_div>;
+ ti,bit-shift = <20>;
+ reg = <0x0558>;
+ };
+
+ ehrpwm1_tbclk: clock-ehrpwm1-tbclk-21@558 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm1_tbclk";
+ clocks = <&l4_root_clk_div>;
+ ti,bit-shift = <21>;
+ reg = <0x0558>;
+ };
+
+ ehrpwm2_tbclk: clock-ehrpwm2-tbclk-22@558 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm2_tbclk";
+ clocks = <&l4_root_clk_div>;
+ ti,bit-shift = <22>;
+ reg = <0x0558>;
+ };
+
+ sys_32k_ck: clock-sys-32k {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "sys_32k_ck";
+ clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x6c4>;
+ };
+};
+
+&cm_core_aon {
+ mpu_cm: clock@300 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "mpu_cm";
+ reg = <0x300 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x300 0x100>;
+
+ mpu_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "mpu_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+
+ };
+
+ dsp1_cm: clock@400 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "dsp1_cm";
+ reg = <0x400 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x400 0x100>;
+
+ dsp1_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "dsp1_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+
+ };
+
+ ipu_cm: clock@500 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "ipu_cm";
+ reg = <0x500 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x500 0x100>;
+
+ ipu1_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "ipu1_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>;
+ assigned-clock-parents = <&dpll_core_h22x2_ck>;
+ };
+
+ ipu_clkctrl: clock@50 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "ipu_clkctrl";
+ reg = <0x50 0x34>;
+ #clock-cells = <2>;
+ };
+
+ };
+
+ dsp2_cm: clock@600 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "dsp2_cm";
+ reg = <0x600 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x600 0x100>;
+
+ dsp2_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "dsp2_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+
+ };
+
+ rtc_cm: clock@700 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "rtc_cm";
+ reg = <0x700 0x60>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x700 0x60>;
+
+ rtc_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "rtc_clkctrl";
+ reg = <0x20 0x28>;
+ #clock-cells = <2>;
+ };
+ };
+
+ vpe_cm: clock@760 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "vpe_cm";
+ reg = <0x760 0xc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x760 0xc>;
+
+ vpe_clkctrl: clock@0 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "vpe_clkctrl";
+ reg = <0x0 0xc>;
+ #clock-cells = <2>;
+ };
+ };
+
+};
+
+&cm_core {
+ coreaon_cm: clock@600 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "coreaon_cm";
+ reg = <0x600 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x600 0x100>;
+
+ coreaon_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "coreaon_clkctrl";
+ reg = <0x20 0x1c>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l3main1_cm: clock@700 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l3main1_cm";
+ reg = <0x700 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x700 0x100>;
+
+ l3main1_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3main1_clkctrl";
+ reg = <0x20 0x74>;
+ #clock-cells = <2>;
+ };
+
+ };
+
+ ipu2_cm: clock@900 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "ipu2_cm";
+ reg = <0x900 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x900 0x100>;
+
+ ipu2_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "ipu2_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+
+ };
+
+ dma_cm: clock@a00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "dma_cm";
+ reg = <0xa00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xa00 0x100>;
+
+ dma_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "dma_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ emif_cm: clock@b00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "emif_cm";
+ reg = <0xb00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xb00 0x100>;
+
+ emif_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "emif_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ atl_cm: clock@c00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "atl_cm";
+ reg = <0xc00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xc00 0x100>;
+
+ atl_clkctrl: clock@0 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "atl_clkctrl";
+ reg = <0x0 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l4cfg_cm: clock@d00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l4cfg_cm";
+ reg = <0xd00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xd00 0x100>;
+
+ l4cfg_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4cfg_clkctrl";
+ reg = <0x20 0x84>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l3instr_cm: clock@e00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l3instr_cm";
+ reg = <0xe00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xe00 0x100>;
+
+ l3instr_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3instr_clkctrl";
+ reg = <0x20 0xc>;
+ #clock-cells = <2>;
+ };
+ };
+
+ iva_cm: clock@f00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "iva_cm";
+ reg = <0xf00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xf00 0x100>;
+
+ iva_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "iva_clkctrl";
+ reg = <0x20 0xc>;
+ #clock-cells = <2>;
+ };
+ };
+
+ cam_cm: clock@1000 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "cam_cm";
+ reg = <0x1000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1000 0x100>;
+
+ cam_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "cam_clkctrl";
+ reg = <0x20 0x2c>;
+ #clock-cells = <2>;
+ };
+ };
+
+ dss_cm: clock@1100 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "dss_cm";
+ reg = <0x1100 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1100 0x100>;
+
+ dss_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "dss_clkctrl";
+ reg = <0x20 0x14>;
+ #clock-cells = <2>;
+ };
+ };
+
+ gpu_cm: clock@1200 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "gpu_cm";
+ reg = <0x1200 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1200 0x100>;
+
+ gpu_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "gpu_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l3init_cm: clock@1300 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l3init_cm";
+ reg = <0x1300 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1300 0x100>;
+
+ l3init_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3init_clkctrl";
+ reg = <0x20 0x6c>, <0xe0 0x14>;
+ #clock-cells = <2>;
+ };
+
+ pcie_clkctrl: clock@b0 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "pcie_clkctrl";
+ reg = <0xb0 0xc>;
+ #clock-cells = <2>;
+ };
+
+ gmac_clkctrl: clock@d0 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "gmac_clkctrl";
+ reg = <0xd0 0x4>;
+ #clock-cells = <2>;
+ };
+
+ };
+
+ l4per_cm: clock@1700 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l4per_cm";
+ reg = <0x1700 0x300>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1700 0x300>;
+
+ l4per_clkctrl: clock@28 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4per_clkctrl";
+ reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>;
+ #clock-cells = <2>;
+
+ assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+ assigned-clock-parents = <&abe_24m_fclk>;
+ };
+
+ l4sec_clkctrl: clock@1a0 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4sec_clkctrl";
+ reg = <0x1a0 0x2c>;
+ #clock-cells = <2>;
+ };
+
+ l4per2_clkctrl: clock@c {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4per2_clkctrl";
+ reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>;
+ #clock-cells = <2>;
+ };
+
+ l4per3_clkctrl: clock@14 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4per3_clkctrl";
+ reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+};
+
+&prm {
+ wkupaon_cm: clock@1800 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "wkupaon_cm";
+ reg = <0x1800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1800 0x100>;
+
+ wkupaon_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "wkupaon_clkctrl";
+ reg = <0x20 0x6c>;
+ #clock-cells = <2>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/elpida_ecb240abacn.dtsi b/src/arm/ti/omap/elpida_ecb240abacn.dtsi
new file mode 100644
index 0000000..9698801
--- /dev/null
+++ b/src/arm/ti/omap/elpida_ecb240abacn.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common devices used in different OMAP boards
+ */
+
+/ {
+ elpida_ECB240ABACN: lpddr2 {
+ compatible = "elpida,ECB240ABACN","jedec,lpddr2-s4";
+ density = <2048>;
+ io-width = <32>;
+
+ tRPab-min-tck = <3>;
+ tRCD-min-tck = <3>;
+ tWR-min-tck = <3>;
+ tRASmin-min-tck = <3>;
+ tRRD-min-tck = <2>;
+ tWTR-min-tck = <2>;
+ tXP-min-tck = <2>;
+ tRTP-min-tck = <2>;
+ tCKE-min-tck = <3>;
+ tCKESR-min-tck = <3>;
+ tFAW-min-tck = <8>;
+
+ timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ tDQSCK-max-derated = <6000>;
+ };
+
+ timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <200000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <10000>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ tDQSCK-max-derated = <6000>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/logicpd-som-lv-35xx-devkit.dts b/src/arm/ti/omap/logicpd-som-lv-35xx-devkit.dts
new file mode 100644
index 0000000..c1705f6
--- /dev/null
+++ b/src/arm/ti/omap/logicpd-som-lv-35xx-devkit.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "logicpd-som-lv.dtsi"
+#include "logicpd-som-lv-baseboard.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+ model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
+ compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb2_2_pins>;
+ hsusb2_2_pins: hsusb2-2-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/logicpd-som-lv-37xx-devkit.dts b/src/arm/ti/omap/logicpd-som-lv-37xx-devkit.dts
new file mode 100644
index 0000000..9dbbcc7
--- /dev/null
+++ b/src/arm/ti/omap/logicpd-som-lv-37xx-devkit.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "logicpd-som-lv.dtsi"
+#include "logicpd-som-lv-baseboard.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+ model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
+ compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb2_2_pins>;
+ hsusb2_2_pins: hsusb2-2-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/logicpd-som-lv-baseboard.dtsi b/src/arm/ti/omap/logicpd-som-lv-baseboard.dtsi
new file mode 100644
index 0000000..690f2ad
--- /dev/null
+++ b/src/arm/ti/omap/logicpd-som-lv-baseboard.dtsi
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/ {
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_key_pins>;
+
+ sysboot2 {
+ label = "gpio3";
+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* gpio_111 / uP_GPIO_3 */
+ linux,code = <BTN_0>;
+ wakeup-source;
+ };
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "omap3logic";
+ ti,mcbsp = <&mcbsp2>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins &led_pins_wkup>;
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* gpio133 */
+ linux,default-trigger = "cpu0";
+ };
+
+ led2 {
+ label = "led2";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* gpio11 */
+ linux,default-trigger = "none";
+ };
+ };
+};
+
+&vaux1 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&mcbsp2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&charger {
+ ti,bb-uvolt = <3200000>;
+ ti,bb-uamp = <150>;
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
+ 1 0 0x2c000000 0x1000000 /* CS1: 16MB for LAN9221 */
+ 2 0 0x10000000 0x2000000>; /* CS2: 32MB for NOR */
+
+ ethernet@gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lan9221_pins>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>; /* gpio_152 */
+ reg = <1 0 0xff>;
+ };
+};
+
+&vpll2 {
+ regulator-always-on;
+};
+
+&dss {
+ status = "okay";
+ vdds_dsi-supply = <&vpll2>;
+ vdda_video-supply = <&video_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins1>;
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <16>;
+ };
+ };
+};
+
+/ {
+ aliases {
+ display0 = &lcd0;
+ };
+
+ video_reg: video_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ lcd0: display {
+ /* This isn't the exact LCD, but the timings meet spec */
+ compatible = "logicpd,type28";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_enable_pin>;
+ backlight = <&bl>;
+ enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
+ bl: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+ pwms = <&twl_pwm 0 5000000>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <7>;
+ enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* gpio_8 */
+ };
+};
+
+&mmc1 {
+ interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
+ cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* gpio_110 */
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+ cap-power-off-card;
+};
+
+&omap3_pmx_core {
+ gpio_key_pins: gpio-key-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_xclkb.gpio_111 / uP_GPIO_3*/
+ >;
+ };
+
+ led_pins: led-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x215e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* sdmmc2_dat1.gpio_133 / uP_GPIO_0 */
+ >;
+ };
+
+ lan9221_pins: lan9221-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 */
+ OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */
+ >;
+ };
+
+ lcd_enable_pin: lcd-enable-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */
+ >;
+ };
+
+ dss_dpi_pins1: dss-dpi1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */
+
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */
+ >;
+ };
+};
+
+&omap3_pmx_wkup {
+ led_pins_wkup: led-wkup-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 / uP_GPIO_1 */
+ >;
+ };
+
+ backlight_pins: backlight-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* sys_boot6.gpio_8 */
+ >;
+ };
+};
+
+
+&uart1 {
+ interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
+&usb_otg_hs {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb_otg_pins>;
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
diff --git a/src/arm/ti/omap/logicpd-som-lv.dtsi b/src/arm/ti/omap/logicpd-som-lv.dtsi
new file mode 100644
index 0000000..c0e6b73
--- /dev/null
+++ b/src/arm/ti/omap/logicpd-som-lv.dtsi
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0>;
+ };
+
+ wl12xx_vmmc: wl12xx_vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 3 0>; /* gpio_3 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ vin-supply = <&vaux3>;
+ };
+
+ /* HS USB Host PHY on PORT 1 */
+ hsusb2_phy: hsusb2_phy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb2_reset_pin>;
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
+ #phy-cells = <0>;
+ };
+
+ /* fixed 26MHz oscillator */
+ hfclk_26m: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ linux,mtd-name = "micron,mt29f4g16abbda3w";
+ nand-bus-width = <16>;
+ ti,nand-ecc-opt = "bch8";
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ clocks = <&hfclk_26m>;
+ clock-names = "fck";
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ ti,hs_extmute_gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ clock-frequency = <400000>;
+
+ touchscreen: tsc2004@48 {
+ compatible = "ti,tsc2004";
+ reg = <0x48>;
+ vio-supply = <&vaux1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsc2004_pins>;
+ interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
+
+ touchscreen-fuzz-x = <4>;
+ touchscreen-fuzz-y = <7>;
+ touchscreen-fuzz-pressure = <2>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ touchscreen-max-pressure = <2048>;
+
+ ti,x-plate-ohms = <280>;
+ ti,esd-recovery-timeout-ms = <8000>;
+ };
+};
+
+&mmc3 {
+ interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
+ pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
+ pinctrl-names = "default";
+ vmmc-supply = <&wl12xx_vmmc>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1273";
+ reg = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 2 */
+ ref-clock-frequency = <26000000>;
+ };
+};
+
+&usbhshost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb2_pins>;
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy>;
+};
+
+&omap3_pmx_core {
+
+ mmc3_pins: mm3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */
+ OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
+ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs2.sdmmc_clk */
+ >;
+ };
+ mcbsp2_pins: mcbsp2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */
+ >;
+ };
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */
+ >;
+ };
+ mcspi1_pins: mcspi1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
+ OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
+ OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+ OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
+ >;
+ };
+
+ hsusb2_pins: hsusb2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
+ OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
+ >;
+ };
+
+ hsusb_otg_pins: hsusb-otg-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
+ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
+ OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
+ OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
+ OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
+ OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
+ OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
+ OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
+ OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
+ OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
+ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
+ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ tsc2004_pins: tsc2004-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */
+ >;
+ };
+};
+
+&omap3_pmx_wkup {
+
+ hsusb2_reset_pin: hsusb1-reset-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */
+ >;
+ };
+ wl127x_gpio: wl127x-gpio-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */
+ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
+ >;
+ };
+};
+
+&uart2 {
+ interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&mcspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi1_pins>;
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&vaux3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
+&twl {
+ twl_power: power {
+ compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
+ ti,use_poweroff;
+ };
+};
+
+&twl_gpio {
+ ti,use-leds;
+};
diff --git a/src/arm/ti/omap/logicpd-torpedo-35xx-devkit.dts b/src/arm/ti/omap/logicpd-torpedo-35xx-devkit.dts
new file mode 100644
index 0000000..eaa583f
--- /dev/null
+++ b/src/arm/ti/omap/logicpd-torpedo-35xx-devkit.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "logicpd-torpedo-som.dtsi"
+#include "logicpd-torpedo-baseboard.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+ model = "LogicPD Zoom OMAP35xx Torpedo Development Kit";
+ compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core {
+ isp1763_pins: isp1763-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat6.gpio_128 */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/logicpd-torpedo-37xx-devkit-28.dts b/src/arm/ti/omap/logicpd-torpedo-37xx-devkit-28.dts
new file mode 100644
index 0000000..b553613
--- /dev/null
+++ b/src/arm/ti/omap/logicpd-torpedo-37xx-devkit-28.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+/*
+ * There are two types of 4.3" LCD, Type 15 and Type 28.
+ * By default, type 15 was used. This device tree file
+ * uses the timing for the type 28 LCD
+ */
+
+#include "logicpd-torpedo-37xx-devkit.dts"
+
+&lcd0 {
+ compatible = "logicpd,type28";
+};
diff --git a/src/arm/ti/omap/logicpd-torpedo-37xx-devkit.dts b/src/arm/ti/omap/logicpd-torpedo-37xx-devkit.dts
new file mode 100644
index 0000000..533ce7c
--- /dev/null
+++ b/src/arm/ti/omap/logicpd-torpedo-37xx-devkit.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "logicpd-torpedo-som.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+#include "logicpd-torpedo-baseboard.dtsi"
+
+/ {
+ model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit";
+ compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
+
+ wl12xx_vmmc: wl12xx_vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio5 29 0>; /* gpio157 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ vin-supply = <&vmmc2>;
+ };
+};
+
+/*
+ * Only found on the wireless SOM. For the SOM without wireless, the pins for
+ * MMC3 can be routed with jumpers to the second MMC slot on the devkit and
+ * gpio157 is not connected. So this should be OK to keep common for now,
+ * probably device tree overlays is the way to go with the various SOM and
+ * jumpering combinations for the long run.
+ */
+&mmc3 {
+ interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
+ pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
+ pinctrl-names = "default";
+ vmmc-supply = <&wl12xx_vmmc>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1283";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <24 IRQ_TYPE_EDGE_RISING>; /* gpio 152 */
+ ref-clock-frequency = <26000000>;
+ tcxo-clock-frequency = <26000000>;
+ };
+};
+
+&uart2 {
+ /delete-property/dma-names;
+ bluetooth {
+ compatible = "ti,wl1283-st";
+ enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio 162 */
+ max-speed = <3000000>;
+ };
+};
+
+/* The DM3730 has a faster L3 than OMAP35, so increase pixel clock */
+&mt9p031_out {
+ pixel-clock-frequency = <90000000>;
+};
+
+&omap3_pmx_core {
+ mmc3_pins: mm3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */
+ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ mmc3_core2_pins: mmc3-core2-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
+ OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
+ >;
+ };
+};
+
+/* The gpio muxing between omap3530 and dm3730 is different for GPIO_128 */
+&omap3_pmx_wkup {
+ isp1763_pins: isp1763-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a58, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_128 */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/logicpd-torpedo-baseboard.dtsi b/src/arm/ti/omap/logicpd-torpedo-baseboard.dtsi
new file mode 100644
index 0000000..e0caed5
--- /dev/null
+++ b/src/arm/ti/omap/logicpd-torpedo-baseboard.dtsi
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/ {
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
+
+ sysboot2 {
+ label = "sysboot2";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */
+ linux,code = <BTN_0>;
+ wakeup-source;
+ };
+
+ sysboot5 {
+ label = "sysboot5";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */
+ linux,code = <BTN_1>;
+ wakeup-source;
+ };
+
+ gpio1 {
+ label = "gpio1";
+ gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */
+ linux,code = <BTN_2>;
+ wakeup-source;
+ };
+
+ gpio2 {
+ label = "gpio2";
+ gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */
+ linux,code = <BTN_3>;
+ wakeup-source;
+ };
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "omap3logic";
+ ti,mcbsp = <&mcbsp2>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */
+ linux,default-trigger = "cpu0";
+ };
+
+ led2 {
+ label = "led2";
+ gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */
+ linux,default-trigger = "none";
+ };
+ };
+
+ pwm10: pwm-10 {
+ compatible = "ti,omap-dmtimer-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ ti,timers = <&timer10>;
+ #pwm-cells = <3>;
+ ti,clock-source = <0x01>;
+ };
+
+};
+
+&vaux1 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&mcbsp2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+ status = "okay";
+};
+
+&charger {
+ ti,bb-uvolt = <3200000>;
+ ti,bb-uamp = <150>;
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
+ 1 0 0x2c000000 0x1000000 /* CS1: 16MB for LAN9221 */
+ 6 0 0x28000000 0x1000000>; /* CS6: 16MB for ISP1763 */
+
+ ethernet@gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lan9221_pins>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */
+ reg = <1 0 0xff>;
+ };
+
+ usb@6,0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&isp1763_pins>;
+ compatible = "nxp,usb-isp1763";
+ reg = <0x6 0x0 0xff>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "host";
+ bus-width = <16>;
+ dr_mode = "host";
+ gpmc,mux-add-data = <0>;
+ gpmc,device-width = <2>;
+ gpmc,wait-pin = <0>;
+ gpmc,burst-length = <4>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <45>;
+ gpmc,cs-wr-off-ns = <45>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <0>;
+ gpmc,adv-wr-off-ns = <0>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <45>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <25>;
+ gpmc,rd-cycle-ns = <60>;
+ gpmc,wr-cycle-ns = <45>;
+ gpmc,access-ns = <35>;
+ gpmc,page-burst-access-ns = <0>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <60>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <5>;
+ gpmc,wr-access-ns = <20>;
+ };
+};
+
+&hdqw1w {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdq_pins>;
+};
+
+
+&vpll2 {
+ regulator-always-on;
+};
+
+&dss {
+ status = "okay";
+ vdds_dsi-supply = <&vpll2>;
+ vdda_video-supply = <&vpll2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins1>;
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <16>;
+ };
+ };
+};
+
+/ {
+ aliases {
+ display0 = &lcd0;
+ };
+
+ lcd0: display {
+ /* This isn't the exact LCD, but the timings meet spec */
+ compatible = "newhaven,nhd-4.3-480272ef-atxl";
+ label = "15";
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_pwr_pins>;
+ backlight = <&bl>;
+ enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
+ bl: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+ pwms = <&pwm10 0 5000000 0>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <7>;
+ enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
+ };
+};
+
+&mmc1 {
+ interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+ cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio127 */
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+ cap-power-off-card;
+};
+
+&omap3_pmx_core {
+ gpio_key_pins: gpio-key-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */
+ >;
+ };
+
+ hdq_pins: hdq-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* hdq_sio */
+ >;
+ };
+
+ pwm_pins: pwm-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */
+ >;
+ };
+
+ led_pins: led-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ tsc2004_pins: tsc2004-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */
+ >;
+ };
+
+ backlight_pins: backlight-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */
+ >;
+ };
+
+ isp_pins: isp-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */
+ OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */
+ OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */
+ OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */
+
+ OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */
+ OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */
+ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */
+ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */
+ >;
+ };
+
+ panel_pwr_pins: panel-pwr-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */
+ >;
+ };
+
+ dss_dpi_pins1: dss-dpi1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */
+
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */
+
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */
+ >;
+ };
+};
+
+&omap3_pmx_wkup {
+ gpio_key_pins_wkup: gpio-key-wkup-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */
+ >;
+ };
+
+ lan9221_pins: lan9221-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
+ >;
+ };
+
+ mmc1_cd: mmc1-cd-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */
+ >;
+ };
+};
+
+&i2c2 {
+ mt9p031@48 {
+ compatible = "aptina,mt9p031";
+ reg = <0x48>;
+ clocks = <&isp 0>;
+ vaa-supply = <&vaux4>;
+ vdd-supply = <&vaux4>;
+ vdd_io-supply = <&vaux4>;
+ port {
+ mt9p031_out: endpoint {
+ input-clock-frequency = <24000000>;
+ pixel-clock-frequency = <72000000>;
+ remote-endpoint = <&ccdc_ep>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ touchscreen: tsc2004@48 {
+ compatible = "ti,tsc2004";
+ reg = <0x48>;
+ vio-supply = <&vaux1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsc2004_pins>;
+ interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
+
+ touchscreen-fuzz-x = <4>;
+ touchscreen-fuzz-y = <7>;
+ touchscreen-fuzz-pressure = <2>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ touchscreen-max-pressure = <2048>;
+
+ ti,x-plate-ohms = <280>;
+ ti,esd-recovery-timeout-ms = <8000>;
+ };
+};
+
+&mcspi1 {
+ at25@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ spi-cpha;
+ spi-cpol;
+
+ pagesize = <64>;
+ size = <32768>;
+ address-width = <16>;
+ };
+};
+
+&isp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&isp_pins>;
+ ports {
+ port@0 {
+ reg = <0>;
+ ccdc_ep: endpoint {
+ remote-endpoint = <&mt9p031_out>;
+ bus-width = <8>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ pclk-sample = <0>;
+ };
+ };
+ };
+};
+
+&uart1 {
+ interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
+&usb_otg_hs {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb_otg_pins>;
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
diff --git a/src/arm/ti/omap/logicpd-torpedo-som.dtsi b/src/arm/ti/omap/logicpd-torpedo-som.dtsi
new file mode 100644
index 0000000..2276998
--- /dev/null
+++ b/src/arm/ti/omap/logicpd-torpedo-som.dtsi
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-user0 {
+ label = "user0";
+ gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
+ linux,default-trigger = "none";
+ };
+ };
+
+ /* fixed 26MHz oscillator */
+ hfclk_26m: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+};
+
+/* The Torpedo doesn't route the USB host pins */
+&usbhshost {
+ status = "disabled";
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ linux,mtd-name = "micron,mt29f4g16abbda3w";
+ nand-bus-width = <16>;
+ ti,nand-ecc-opt = "bch8";
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ clocks = <&hfclk_26m>;
+ clock-names = "fck";
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ clock-frequency = <400000>;
+ at24@50 {
+ compatible = "atmel,24c64";
+ readonly;
+ reg = <0x50>;
+ };
+};
+
+&omap3_pmx_core {
+ mcbsp2_pins: mcbsp2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */
+ >;
+ };
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */
+ >;
+ };
+ mcspi1_pins: mcspi1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
+ OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
+ OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+ OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
+ >;
+ };
+ hsusb_otg_pins: hsusb-otg-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
+ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
+ OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
+ OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
+
+ OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
+ OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
+ OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
+ OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
+ OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
+ OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
+ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
+ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
+ >;
+ };
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+ i2c3_pins: i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+};
+
+&uart2 {
+ interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&mcspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi1_pins>;
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl {
+ twl_power: power {
+ compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
+ ti,use_poweroff;
+ };
+};
+
+&twl_gpio {
+ ti,use-leds;
+};
+
+&twl_keypad {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/motorola-cpcap-mapphone.dtsi b/src/arm/ti/omap/motorola-cpcap-mapphone.dtsi
new file mode 100644
index 0000000..ea02fd4
--- /dev/null
+++ b/src/arm/ti/omap/motorola-cpcap-mapphone.dtsi
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Common CPCAP configuration used on Motorola phones
+ */
+
+&mcspi1 {
+ cpcap: pmic@0 {
+ compatible = "motorola,cpcap", "st,6556002";
+ reg = <0>; /* cs0 */
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <9600000>;
+ spi-cs-high;
+ spi-cpol;
+ spi-cpha;
+
+ cpcap_adc: adc {
+ compatible = "motorola,mapphone-cpcap-adc";
+ interrupts-extended = <&cpcap 8 0>;
+ interrupt-names = "adcdone";
+ #io-channel-cells = <1>;
+ };
+
+ cpcap_battery: battery {
+ compatible = "motorola,cpcap-battery";
+ interrupts-extended =
+ <&cpcap 6 0>, <&cpcap 5 0>, <&cpcap 3 0>,
+ <&cpcap 20 0>, <&cpcap 54 0>, <&cpcap 57 0>;
+ interrupt-names =
+ "eol", "lowbph", "lowbpl",
+ "chrgcurr1", "battdetb", "cccal";
+ io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+ <&cpcap_adc 5>, <&cpcap_adc 6>;
+ io-channel-names = "battdetb", "battp",
+ "chg_isense", "batti";
+ power-supplies = <&cpcap_charger>;
+ };
+
+ cpcap_charger: charger {
+ compatible = "motorola,mapphone-cpcap-charger";
+ interrupts-extended =
+ <&cpcap 13 0>, <&cpcap 12 0>, <&cpcap 29 0>,
+ <&cpcap 28 0>, <&cpcap 22 0>, <&cpcap 21 0>,
+ <&cpcap 20 0>, <&cpcap 19 0>, <&cpcap 54 0>;
+ interrupt-names =
+ "chrg_det", "rvrs_chrg", "chrg_se1b",
+ "se0conn", "rvrs_mode", "chrgcurr2",
+ "chrgcurr1", "vbusvld", "battdetb";
+ mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>,
+ <&gpio3 23 GPIO_ACTIVE_LOW>;
+ io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+ <&cpcap_adc 2>, <&cpcap_adc 5>,
+ <&cpcap_adc 6>;
+ io-channel-names = "battdetb", "battp",
+ "vbus", "chg_isense",
+ "batti";
+ };
+
+ cpcap_regulator: regulator {
+ compatible = "motorola,mapphone-cpcap-regulator";
+
+ cpcap_regulators: regulators {
+ };
+ };
+
+ cpcap_audio: audio-codec {
+ #sound-dai-cells = <1>;
+
+ port@0 {
+ cpcap_audio_codec0: endpoint {
+ };
+ };
+ port@1 {
+ cpcap_audio_codec1: endpoint {
+ };
+ };
+ };
+
+ cpcap_rtc: rtc {
+ compatible = "motorola,cpcap-rtc";
+
+ interrupt-parent = <&cpcap>;
+ interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>;
+ };
+
+ power_button: button {
+ compatible = "motorola,cpcap-pwrbutton";
+
+ interrupts = <23 IRQ_TYPE_NONE>;
+ };
+
+ cpcap_usb2_phy: phy {
+ compatible = "motorola,mapphone-cpcap-usb-phy";
+ pinctrl-0 = <&usb_gpio_mux_sel1>, <&usb_gpio_mux_sel2>;
+ pinctrl-1 = <&usb_ulpi_pins>;
+ pinctrl-2 = <&usb_utmi_pins>;
+ pinctrl-3 = <&uart3_pins>;
+ pinctrl-names = "default", "ulpi", "utmi", "uart";
+ #phy-cells = <0>;
+ interrupts-extended =
+ <&cpcap 15 0>, <&cpcap 14 0>, <&cpcap 28 0>,
+ <&cpcap 19 0>, <&cpcap 18 0>, <&cpcap 17 0>,
+ <&cpcap 16 0>, <&cpcap 49 0>, <&cpcap 48 0>;
+ interrupt-names =
+ "id_ground", "id_float", "se0conn",
+ "vbusvld", "sessvld", "sessend",
+ "se1", "dm", "dp";
+ mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,
+ <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
+ io-channel-names = "vbus", "id";
+ vusb-supply = <&vusb>;
+ };
+
+ led_red: led-red {
+ compatible = "motorola,cpcap-led-red";
+ vdd-supply = <&sw5>;
+ label = "status-led:red";
+ };
+
+ led_green: led-green {
+ compatible = "motorola,cpcap-led-green";
+ vdd-supply = <&sw5>;
+ label = "status-led:green";
+ };
+
+ led_blue: led-blue {
+ compatible = "motorola,cpcap-led-blue";
+ vdd-supply = <&sw5>;
+ label = "status-led:blue";
+ };
+
+ led_adl: led-adl {
+ compatible = "motorola,cpcap-led-adl";
+ vdd-supply = <&sw5>;
+ label = "button-backlight";
+ };
+
+ led_cp: led-cp {
+ compatible = "motorola,cpcap-led-cp";
+ vdd-supply = <&sw5>;
+ label = "shift-key-light";
+ };
+ };
+};
+
+&cpcap_regulators {
+ sw5: SW5 {
+ regulator-min-microvolt = <5050000>;
+ regulator-max-microvolt = <5050000>;
+ regulator-enable-ramp-delay = <50000>;
+ regulator-boot-on;
+ };
+
+ vcam: VCAM {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ /* Used by DSS and is the "zerov_regulator" trigger for SoC off mode */
+ vcsi: VCSI {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-always-on;
+ };
+
+ vdac: VDAC {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vdig: VDIG {
+ regulator-min-microvolt = <1875000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vfuse: VFUSE {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vhvio: VHVIO {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-always-on;
+ };
+
+ /* Used by eMMC at mmc2 */
+ vsdio: VSDIO {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vpll: VPLL {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <100>;
+ };
+
+ vrf1: VRF1 {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vrf2: VRF2 {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vrfref: VRFREF {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-enable-ramp-delay = <100>;
+ };
+
+ vwlan1: VWLAN1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ /* Used by micro-SDIO at mmc1 */
+ vwlan2: VWLAN2 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vsim: VSIM {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vsimcard: VSIMCARD {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vvib: VVIB {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <500>;
+ };
+
+ vusb: VUSB {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vaudio: VAUDIO {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-initial-mode = <0x00>; /* NORMAL */
+ };
+};
diff --git a/src/arm/ti/omap/motorola-mapphone-common.dtsi b/src/arm/ti/omap/motorola-mapphone-common.dtsi
new file mode 100644
index 0000000..a2bb360
--- /dev/null
+++ b/src/arm/ti/omap/motorola-mapphone-common.dtsi
@@ -0,0 +1,756 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "omap443x.dtsi"
+#include "motorola-cpcap-mapphone.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ display0 = &lcd0;
+ display1 = &hdmi0;
+ };
+
+ /*
+ * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
+ * then 1023 - 1024 seems to contain mbm.
+ */
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x3fd00000>; /* 1021 MB */
+ };
+
+ /* Poweroff GPIO probably connected to CPCAP */
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&poweroff_gpio>;
+ pinctrl-names = "default";
+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; /* gpio50 */
+ };
+
+ hdmi0: connector {
+ compatible = "hdmi-connector";
+ pinctrl-0 = <&hdmi_hpd_gpio>;
+ pinctrl-names = "default";
+ label = "hdmi";
+ type = "d";
+
+ hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio63 */
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+ };
+
+ /*
+ * HDMI 5V regulator probably sourced from battery. Let's keep
+ * keep this as always enabled for HDMI to work until we've
+ * figured what the encoder chip is.
+ */
+ hdmi_regulator: regulator-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "hdmi";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ /* FS USB Host PHY on port 1 for mdm6600 */
+ fsusb1_phy: usb-phy@1 {
+ compatible = "motorola,mapphone-mdm6600";
+ pinctrl-0 = <&usb_mdm6600_pins>;
+ pinctrl-1 = <&usb_mdm6600_sleep_pins>;
+ pinctrl-names = "default", "sleep";
+ enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */
+ power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */
+ reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */
+ /* mode: gpio_148 gpio_149 */
+ motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+ <&gpio5 21 GPIO_ACTIVE_HIGH>;
+ /* cmd: gpio_103 gpio_104 gpio_142 */
+ motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+ <&gpio4 8 GPIO_ACTIVE_HIGH>,
+ <&gpio5 14 GPIO_ACTIVE_HIGH>;
+ /* status: gpio_52 gpio_53 gpio_55 */
+ motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+ <&gpio2 21 GPIO_ACTIVE_HIGH>,
+ <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ #phy-cells = <0>;
+ };
+
+ /* HS USB host TLL nop-phy on port 2 for w3glte */
+ hsusb2_phy: usb-phy@2 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
+ /* LCD regulator from sw5 source */
+ lcd_regulator: regulator-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd";
+ regulator-min-microvolt = <5050000>;
+ regulator-max-microvolt = <5050000>;
+ gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */
+ enable-active-high;
+ vin-supply = <&sw5>;
+ };
+
+ /* This is probably coming straight from the battery.. */
+ wl12xx_vmmc: regulator-wl12xx {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1650000>;
+ gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ soundcard {
+ compatible = "audio-graph-card";
+ label = "Mapphone Audio";
+
+ widgets =
+ "Speaker", "Earpiece",
+ "Speaker", "Loudspeaker",
+ "Headphone", "Headphone Jack",
+ "Microphone", "Internal Mic";
+
+ routing =
+ "Earpiece", "EP",
+ "Loudspeaker", "SPKR",
+ "Headphone Jack", "HSL",
+ "Headphone Jack", "HSR",
+ "MICR", "Internal Mic";
+
+ dais = <&mcbsp2_port>, <&mcbsp3_port>;
+ };
+
+ pwm8: pwm-8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_direction_pin>;
+
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer8>;
+ ti,clock-source = <0x01>;
+ };
+
+ pwm9: pwm-9 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_enable_pin>;
+
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer9>;
+ ti,clock-source = <0x01>;
+ };
+
+ vibrator {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+ pwm-names = "enable", "direction";
+ direction-duty-cycle-ns = <10000000>;
+ };
+
+ backlight: backlight {
+ compatible = "led-backlight";
+
+ leds = <&backlight_led>;
+ brightness-levels = <31 63 95 127 159 191 223 255>;
+ default-brightness-level = <6>;
+ };
+};
+
+&cpu_thermal {
+ polling-delay = <10000>; /* milliseconds */
+};
+
+&cpu_alert0 {
+ temperature = <80000>; /* millicelsius */
+};
+
+&cpu0 {
+ /*
+ * Note that the 1.2GiHz mode is enabled for all SoC variants for
+ * the Motorola Android Linux v3.0.8 based kernel.
+ */
+ operating-points = <
+ /* kHz uV */
+ 300000 1025000
+ 600000 1200000
+ 800000 1313000
+ 1008000 1375000
+ 1200000 1375000
+ >;
+};
+
+&dss {
+ status = "okay";
+};
+
+&dsi1 {
+ status = "okay";
+ vdd-supply = <&vcsi>;
+
+ port {
+ dsi1_out_ep: endpoint {
+ remote-endpoint = <&lcd0_in>;
+ lanes = <0 1 2 3 4 5>;
+ };
+ };
+
+ lcd0: panel@0 {
+ compatible = "motorola,droid4-panel", "panel-dsi-cm";
+ reg = <0>;
+ label = "lcd0";
+ vddi-supply = <&lcd_regulator>;
+ reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
+
+ backlight = <&backlight>;
+
+ width-mm = <50>;
+ height-mm = <89>;
+ rotation = <90>;
+
+ panel-timing {
+ clock-frequency = <0>; /* Calculated by dsi */
+
+ hback-porch = <2>;
+ hactive = <540>;
+ hfront-porch = <0>;
+ hsync-len = <2>;
+
+ vback-porch = <1>;
+ vactive = <960>;
+ vfront-porch = <0>;
+ vsync-len = <1>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ lcd0_in: endpoint {
+ remote-endpoint = <&dsi1_out_ep>;
+ };
+ };
+ };
+};
+
+&hdmi {
+ status = "okay";
+ pinctrl-0 = <&dss_hdmi_pins>;
+ pinctrl-names = "default";
+ vdda-supply = <&vdac>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ lanes = <1 0 3 2 5 4 7 6>;
+ };
+ };
+};
+
+/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
+&hdqw1w {
+ pinctrl-0 = <&hdq_pins>;
+ pinctrl-names = "default";
+ ti,mode = "1w";
+};
+
+&i2c1 {
+ tmp105@48 {
+ compatible = "ti,tmp105";
+ reg = <0x48>;
+ pinctrl-0 = <&tmp105_irq>;
+ pinctrl-names = "default";
+ /* kpd_row0.gpio_178 */
+ interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
+ &omap4_pmx_core 0x14e>;
+ interrupt-names = "irq", "wakeup";
+ wakeup-source;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vwlan2>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */
+};
+
+&mmc2 {
+ vmmc-supply = <&vsdio>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+ vmmc-supply = <&wl12xx_vmmc>;
+ /* uart2_tx.sdmmc3_dat1 pad as wakeirq */
+ interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core 0xde>;
+ interrupt-names = "irq", "wakeup";
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1285";
+ reg = <2>;
+ /* gpio_100 with gpmc_wait2 pad as wakeirq */
+ interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>,
+ <&omap4_pmx_core 0x4e>;
+ interrupt-names = "irq", "wakeup";
+ ref-clock-frequency = <26000000>;
+ tcxo-clock-frequency = <26000000>;
+ };
+};
+
+&i2c2 {
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+
+ reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
+
+ /* gpio_183 with sys_nirq2 pad as wakeup */
+ interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
+ <&omap4_pmx_core 0x160>;
+ interrupt-names = "irq", "wakeup";
+ wakeup-source;
+ };
+
+ isl29030@44 {
+ compatible = "isil,isl29030";
+ reg = <0x44>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&als_proximity_pins>;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
+ };
+};
+
+&omap4_pmx_core {
+
+ /* hdmi_hpd.gpio_63 */
+ hdmi_hpd_gpio: hdmi-hpd-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
+ >;
+ };
+
+ hdq_pins: hdq-pins {
+ pinctrl-single,pins = <
+ /* 0x4a100120 hdq_sio.hdq_sio aa27 */
+ OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
+ >;
+ };
+
+ /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
+ dss_hdmi_pins: dss-hdmi-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)
+ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
+ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
+ >;
+ };
+
+ /*
+ * Android uses PIN_OFF_INPUT_PULLDOWN | PIN_INPUT_PULLUP | MUX_MODE3
+ * for gpio_100, but the internal pull makes wlan flakey on some
+ * devices. Off mode value should be tested if we have off mode working
+ * later on.
+ */
+ mmc3_pins: mmc3-pins {
+ pinctrl-single,pins = <
+ /* 0x4a10008e gpmc_wait2.gpio_100 d23 */
+ OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3)
+
+ /* 0x4a100102 abe_mcbsp1_dx.sdmmc3_dat2 ab25 */
+ OMAP4_IOPAD(0x102, PIN_INPUT_PULLUP | MUX_MODE1)
+
+ /* 0x4a100104 abe_mcbsp1_fsx.sdmmc3_dat3 ac27 */
+ OMAP4_IOPAD(0x104, PIN_INPUT_PULLUP | MUX_MODE1)
+
+ /* 0x4a100118 uart2_cts.sdmmc3_clk ab26 */
+ OMAP4_IOPAD(0x118, PIN_INPUT | MUX_MODE1)
+
+ /* 0x4a10011a uart2_rts.sdmmc3_cmd ab27 */
+ OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE1)
+
+ /* 0x4a10011c uart2_rx.sdmmc3_dat0 aa25 */
+ OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE1)
+
+ /* 0x4a10011e uart2_tx.sdmmc3_dat1 aa26 */
+ OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE1)
+ >;
+ };
+
+ /* gpmc_ncs0.gpio_50 */
+ poweroff_gpio: poweroff-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ /* kpd_row0.gpio_178 */
+ tmp105_irq: tmp105-irq-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ usb_gpio_mux_sel1: usb-gpio-mux-sel1-pins {
+ /* gpio_60 */
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
+ >;
+ };
+
+ touchscreen_pins: touchscreen-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ als_proximity_pins: als-proximity-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ usb_mdm6600_pins: usb-mdm6600-pins {
+ pinctrl-single,pins = <
+ /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
+ OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+
+ /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
+ OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+
+ /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
+ OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
+
+ /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
+ OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+
+ /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
+ OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+
+ /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
+ OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+
+ /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+
+ /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
+ OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+
+ /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
+ OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+
+ /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
+ OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+
+ /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
+ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+ >;
+ };
+
+ /* Modem sleep pins to keep gpio_49 high with internal pull */
+ usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
+ OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+ >;
+ };
+
+ usb_ulpi_pins: usb-ulpi-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x196, MUX_MODE7)
+ OMAP4_IOPAD(0x198, MUX_MODE7)
+ OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ /* usb0_otg_dp and usb0_otg_dm */
+ usb_utmi_pins: usb-utmi-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
+ OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
+ OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
+ /*
+ * Note that the v3.0.8 stock userspace dynamically remuxes uart1
+ * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7
+ * when not used. If needed, we can add rts pin remux later based
+ * on power measurements.
+ */
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */
+ OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)
+
+ /* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */
+ OMAP4_IOPAD(0x13e, MUX_MODE1)
+
+ /* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */
+ OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1)
+
+ /* 0x4a1001ca dpm_emu14.uart1_rx aa3 */
+ OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2)
+ >;
+ };
+
+ /* uart3_tx_irtx and uart3_rx_irrx */
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x196, MUX_MODE7)
+ OMAP4_IOPAD(0x198, MUX_MODE7)
+ OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1ba, MUX_MODE2)
+ OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
+ OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
+ uart4_pins: uart4-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx */
+ OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx */
+ OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5) /* uart4_cts */
+ OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5) /* uart4_rts */
+ >;
+ };
+
+ mcbsp2_pins: mcbsp2-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */
+ OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */
+ OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0) /* abe_mcbsp2_dx */
+ OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx */
+ >;
+ };
+
+ mcbsp3_pins: mcbsp3-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_dr */
+ OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1) /* abe_mcbsp3_dx */
+ OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_clkx */
+ OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */
+ >;
+ };
+
+ vibrator_direction_pin: vibrator-direction-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
+ >;
+ };
+
+ vibrator_enable_pin: vibrator-enable-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
+ >;
+ };
+};
+
+&omap4_pmx_wkup {
+ usb_gpio_mux_sel2: usb-gpio-mux-sel2-pins {
+ /* gpio_wk0 */
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+ >;
+ };
+};
+
+/* RNG is used by secure mode and not accessible */
+&rng_target {
+ status = "disabled";
+};
+
+/* Configure pwm clock source for timers 8 & 9 */
+&timer8 {
+ assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&timer9 {
+ assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_32k_ck>;
+};
+
+/*
+ * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
+ * for wake-up events for both the USB PHY and the UART. We can use gpio_149
+ * pad as the shared wakeirq for the UART rather than the RX or CTS pad as we
+ * have gpio_149 trigger before the UART transfer starts.
+ */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core 0x110>;
+ uart-has-rtscts;
+ current-speed = <115200>;
+};
+
+&uart3 {
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core 0x17c>;
+ overrun-throttle-ms = <500>;
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+
+ bluetooth {
+ compatible = "ti,wl1285-st";
+ enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */
+ max-speed = <3686400>;
+ };
+};
+
+&usbhsohci {
+ phys = <&fsusb1_phy>;
+ phy-names = "usb";
+};
+
+&usbhsehci {
+ phys = <&hsusb2_phy>;
+};
+
+&usbhshost {
+ port1-mode = "ohci-phy-4pin-dpdm";
+ port2-mode = "ehci-tll";
+};
+
+/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
+&usb_otg_hs {
+ interface-type = <1>;
+ mode = <3>;
+
+ /*
+ * Max 300 mA steps based on similar PMIC MC13783UG.pdf "Table 10-4.
+ * VBUS Regulator Main Characteristics". Binding uses 2 mA units.
+ */
+ power = <150>;
+};
+
+&i2c4 {
+ ak8975: magnetometer@c {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0c>;
+
+ vdd-supply = <&vhvio>;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
+
+ rotation-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
+
+ };
+};
+
+&mcbsp2 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+ status = "okay";
+
+ mcbsp2_port: port {
+ cpu_dai2: endpoint {
+ dai-format = "i2s";
+ remote-endpoint = <&cpcap_audio_codec0>;
+ frame-master = <&cpcap_audio_codec0>;
+ bitclock-master = <&cpcap_audio_codec0>;
+ };
+ };
+};
+
+&mcbsp3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp3_pins>;
+ status = "okay";
+
+ mcbsp3_port: port {
+ cpu_dai3: endpoint {
+ dai-format = "dsp_a";
+ frame-master = <&cpcap_audio_codec1>;
+ bitclock-master = <&cpcap_audio_codec1>;
+ remote-endpoint = <&cpcap_audio_codec1>;
+ };
+ };
+};
+
+&cpcap_audio_codec0 {
+ remote-endpoint = <&cpu_dai2>;
+};
+
+&cpcap_audio_codec1 {
+ remote-endpoint = <&cpu_dai3>;
+};
diff --git a/src/arm/ti/omap/omap-gpmc-smsc911x.dtsi b/src/arm/ti/omap/omap-gpmc-smsc911x.dtsi
new file mode 100644
index 0000000..3046ec5
--- /dev/null
+++ b/src/arm/ti/omap/omap-gpmc-smsc911x.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common file for GPMC connected smsc911x on omaps
+ *
+ * Note that the board specifc DTS file needs to specify
+ * ranges, pinctrl, reg, interrupt parent and interrupts.
+ */
+
+/ {
+ vddvario: regulator-vddvario {
+ compatible = "regulator-fixed";
+ regulator-name = "vddvario";
+ regulator-always-on;
+ };
+
+ vdd33a: regulator-vdd33a {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd33a";
+ regulator-always-on;
+ };
+};
+
+&gpmc {
+ ethernet@gpmc {
+ compatible = "smsc,lan9221", "smsc,lan9115";
+ bank-width = <2>;
+ gpmc,device-width = <1>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+ gpmc,cs-on-ns = <5>;
+ gpmc,cs-rd-off-ns = <150>;
+ gpmc,cs-wr-off-ns = <150>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <15>;
+ gpmc,adv-wr-off-ns = <40>;
+ gpmc,oe-on-ns = <45>;
+ gpmc,oe-off-ns = <140>;
+ gpmc,we-on-ns = <45>;
+ gpmc,we-off-ns = <140>;
+ gpmc,rd-cycle-ns = <155>;
+ gpmc,wr-cycle-ns = <155>;
+ gpmc,access-ns = <120>;
+ gpmc,page-burst-access-ns = <20>;
+ gpmc,bus-turnaround-ns = <75>;
+ gpmc,cycle2cycle-delay-ns = <75>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,wr-access-ns = <0>;
+ vddvario-supply = <&vddvario>;
+ vdd33a-supply = <&vdd33a>;
+ reg-io-width = <4>;
+ smsc,save-mac-address;
+ };
+};
diff --git a/src/arm/ti/omap/omap-gpmc-smsc9221.dtsi b/src/arm/ti/omap/omap-gpmc-smsc9221.dtsi
new file mode 100644
index 0000000..bc8961f
--- /dev/null
+++ b/src/arm/ti/omap/omap-gpmc-smsc9221.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common file for GPMC connected smsc9221 on omaps
+ *
+ * Compared to smsc911x, smsc9221 (and others like smsc9217
+ * or smsc 9218) has faster timings, leading to higher
+ * bandwidth.
+ *
+ * Note that the board specifc DTS file needs to specify
+ * ranges, pinctrl, reg, interrupt parent and interrupts.
+ */
+
+/ {
+ vddvario: regulator-vddvario {
+ compatible = "regulator-fixed";
+ regulator-name = "vddvario";
+ regulator-always-on;
+ };
+
+ vdd33a: regulator-vdd33a {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd33a";
+ regulator-always-on;
+ };
+};
+
+&gpmc {
+ ethernet@gpmc {
+ compatible = "smsc,lan9221","smsc,lan9115";
+ bank-width = <2>;
+
+ gpmc,mux-add-data = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <42>;
+ gpmc,cs-wr-off-ns = <36>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <12>;
+ gpmc,adv-wr-off-ns = <12>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <42>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <36>;
+ gpmc,rd-cycle-ns = <60>;
+ gpmc,wr-cycle-ns = <54>;
+ gpmc,access-ns = <36>;
+ gpmc,page-burst-access-ns = <0>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <18>;
+ gpmc,wr-access-ns = <42>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+
+ vddvario-supply = <&vddvario>;
+ vdd33a-supply = <&vdd33a>;
+ reg-io-width = <4>;
+ smsc,save-mac-address;
+ };
+};
diff --git a/src/arm/ti/omap/omap-zoom-common.dtsi b/src/arm/ti/omap/omap-zoom-common.dtsi
new file mode 100644
index 0000000..8adc0ef
--- /dev/null
+++ b/src/arm/ti/omap/omap-zoom-common.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common features on the Zoom debug board
+ */
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+ ranges = <3 0 0x10000000 0x1000000>, /* CS3: 16MB for UART */
+ <7 0 0x2c000000 0x01000000>;
+
+ /*
+ * Four port TL16CP754C serial port on GPMC,
+ * they probably share the same GPIO IRQ
+ * REVISIT: Add timing support from slls644g.pdf
+ */
+ serial@3,0 {
+ compatible = "ns16550a";
+ reg = <3 0 8>; /* CS3, offset 0, IO size 8 */
+ bank-width = <2>;
+ reg-shift = <1>;
+ reg-io-width = <1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ gpmc,mux-add-data = <0>;
+ gpmc,device-width = <1>;
+ gpmc,wait-pin = <1>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+ gpmc,cs-on-ns = <5>;
+ gpmc,cs-rd-off-ns = <155>;
+ gpmc,cs-wr-off-ns = <155>;
+ gpmc,adv-on-ns = <15>;
+ gpmc,adv-rd-off-ns = <40>;
+ gpmc,adv-wr-off-ns = <40>;
+ gpmc,oe-on-ns = <45>;
+ gpmc,oe-off-ns = <145>;
+ gpmc,we-on-ns = <45>;
+ gpmc,we-off-ns = <145>;
+ gpmc,rd-cycle-ns = <155>;
+ gpmc,wr-cycle-ns = <155>;
+ gpmc,access-ns = <145>;
+ gpmc,page-burst-access-ns = <20>;
+ gpmc,bus-turnaround-ns = <20>;
+ gpmc,cycle2cycle-delay-ns = <20>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <45>;
+ gpmc,wr-access-ns = <145>;
+ };
+ serial@3,1 {
+ compatible = "ns16550a";
+ reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */
+ bank-width = <2>;
+ reg-shift = <1>;
+ reg-io-width = <1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ };
+ serial@3,2 {
+ compatible = "ns16550a";
+ reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */
+ bank-width = <2>;
+ reg-shift = <1>;
+ reg-io-width = <1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ };
+ serial@3,3 {
+ compatible = "ns16550a";
+ reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */
+ bank-width = <2>;
+ reg-shift = <1>;
+ reg-io-width = <1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ };
+
+ ethernet@gpmc {
+ reg = <7 0 0xff>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>; /* gpio158 */
+ };
+};
diff --git a/src/arm/ti/omap/omap2.dtsi b/src/arm/ti/omap/omap2.dtsi
new file mode 100644
index 0000000..afabb36
--- /dev/null
+++ b/src/arm/ti/omap/omap2.dtsi
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP2 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+/ {
+ compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
+ interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm1136jf-s";
+ device_type = "cpu";
+ };
+ };
+
+ pmu {
+ compatible = "arm,arm1136-pmu";
+ interrupts = <3>;
+ };
+
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap2-mpu";
+ ti,hwmods = "mpu";
+ };
+ };
+
+ ocp {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main";
+
+ aes: aes@480a6000 {
+ compatible = "ti,omap2-aes";
+ ti,hwmods = "aes";
+ reg = <0x480a6000 0x50>;
+ dmas = <&sdma 9 &sdma 10>;
+ dma-names = "tx", "rx";
+ };
+
+ hdq1w: 1w@480b2000 {
+ compatible = "ti,omap2420-1w";
+ ti,hwmods = "hdq1w";
+ reg = <0x480b2000 0x1000>;
+ interrupts = <58>;
+ };
+
+ intc: interrupt-controller@1 {
+ compatible = "ti,omap2-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x480FE000 0x1000>;
+ };
+
+ target-module@48056000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x48056000 0x4>,
+ <0x4805602c 0x4>,
+ <0x48056028 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&core_l3_ck>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48056000 0x1000>;
+
+ sdma: dma-controller@0 {
+ compatible = "ti,omap2420-sdma", "ti,omap-sdma";
+ reg = <0 0x1000>;
+ interrupts = <12>,
+ <13>,
+ <14>,
+ <15>;
+ #dma-cells = <1>;
+ dma-channels = <32>;
+ dma-requests = <64>;
+ };
+ };
+
+ i2c1: i2c@48070000 {
+ compatible = "ti,omap2-i2c";
+ ti,hwmods = "i2c1";
+ reg = <0x48070000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <56>;
+ };
+
+ i2c2: i2c@48072000 {
+ compatible = "ti,omap2-i2c";
+ ti,hwmods = "i2c2";
+ reg = <0x48072000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <57>;
+ };
+
+ mcspi1: spi@48098000 {
+ compatible = "ti,omap2-mcspi";
+ ti,hwmods = "mcspi1";
+ reg = <0x48098000 0x100>;
+ interrupts = <65>;
+ dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
+ &sdma 39 &sdma 40 &sdma 41 &sdma 42>;
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
+ };
+
+ mcspi2: spi@4809a000 {
+ compatible = "ti,omap2-mcspi";
+ ti,hwmods = "mcspi2";
+ reg = <0x4809a000 0x100>;
+ interrupts = <66>;
+ dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
+
+ rng: rng@480a0000 {
+ compatible = "ti,omap2-rng";
+ ti,hwmods = "rng";
+ reg = <0x480a0000 0x50>;
+ interrupts = <52>;
+ };
+
+ sham: sham@480a4000 {
+ compatible = "ti,omap2-sham";
+ ti,hwmods = "sham";
+ reg = <0x480a4000 0x64>;
+ interrupts = <51>;
+ dmas = <&sdma 13>;
+ dma-names = "rx";
+ };
+
+ uart1: serial@4806a000 {
+ compatible = "ti,omap2-uart";
+ ti,hwmods = "uart1";
+ reg = <0x4806a000 0x2000>;
+ interrupts = <72>;
+ dmas = <&sdma 49 &sdma 50>;
+ dma-names = "tx", "rx";
+ clock-frequency = <48000000>;
+ };
+
+ uart2: serial@4806c000 {
+ compatible = "ti,omap2-uart";
+ ti,hwmods = "uart2";
+ reg = <0x4806c000 0x400>;
+ interrupts = <73>;
+ dmas = <&sdma 51 &sdma 52>;
+ dma-names = "tx", "rx";
+ clock-frequency = <48000000>;
+ };
+
+ uart3: serial@4806e000 {
+ compatible = "ti,omap2-uart";
+ ti,hwmods = "uart3";
+ reg = <0x4806e000 0x400>;
+ interrupts = <74>;
+ dmas = <&sdma 53 &sdma 54>;
+ dma-names = "tx", "rx";
+ clock-frequency = <48000000>;
+ };
+
+ timer2_target: target-module@4802a000 {
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x4802a000 0x4>,
+ <0x4802a010 0x4>,
+ <0x4802a014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&gpt2_fck>, <&gpt2_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4802a000 0x1000>;
+
+ timer2: timer@0 {
+ compatible = "ti,omap2420-timer";
+ reg = <0 0x400>;
+ interrupts = <38>;
+ };
+ };
+
+ timer3: timer@48078000 {
+ compatible = "ti,omap2420-timer";
+ reg = <0x48078000 0x400>;
+ interrupts = <39>;
+ ti,hwmods = "timer3";
+ };
+
+ timer4: timer@4807a000 {
+ compatible = "ti,omap2420-timer";
+ reg = <0x4807a000 0x400>;
+ interrupts = <40>;
+ ti,hwmods = "timer4";
+ };
+
+ timer5: timer@4807c000 {
+ compatible = "ti,omap2420-timer";
+ reg = <0x4807c000 0x400>;
+ interrupts = <41>;
+ ti,hwmods = "timer5";
+ ti,timer-dsp;
+ };
+
+ timer6: timer@4807e000 {
+ compatible = "ti,omap2420-timer";
+ reg = <0x4807e000 0x400>;
+ interrupts = <42>;
+ ti,hwmods = "timer6";
+ ti,timer-dsp;
+ };
+
+ timer7: timer@48080000 {
+ compatible = "ti,omap2420-timer";
+ reg = <0x48080000 0x400>;
+ interrupts = <43>;
+ ti,hwmods = "timer7";
+ ti,timer-dsp;
+ };
+
+ timer8: timer@48082000 {
+ compatible = "ti,omap2420-timer";
+ reg = <0x48082000 0x400>;
+ interrupts = <44>;
+ ti,hwmods = "timer8";
+ ti,timer-dsp;
+ };
+
+ timer9: timer@48084000 {
+ compatible = "ti,omap2420-timer";
+ reg = <0x48084000 0x400>;
+ interrupts = <45>;
+ ti,hwmods = "timer9";
+ ti,timer-pwm;
+ };
+
+ timer10: timer@48086000 {
+ compatible = "ti,omap2420-timer";
+ reg = <0x48086000 0x400>;
+ interrupts = <46>;
+ ti,hwmods = "timer10";
+ ti,timer-pwm;
+ };
+
+ timer11: timer@48088000 {
+ compatible = "ti,omap2420-timer";
+ reg = <0x48088000 0x400>;
+ interrupts = <47>;
+ ti,hwmods = "timer11";
+ ti,timer-pwm;
+ };
+
+ timer12: timer@4808a000 {
+ compatible = "ti,omap2420-timer";
+ reg = <0x4808a000 0x400>;
+ interrupts = <48>;
+ ti,hwmods = "timer12";
+ ti,timer-pwm;
+ };
+
+ dss: dss@48050000 {
+ compatible = "ti,omap2-dss";
+ reg = <0x48050000 0x400>;
+ status = "disabled";
+ ti,hwmods = "dss_core";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dispc@48050400 {
+ compatible = "ti,omap2-dispc";
+ reg = <0x48050400 0x400>;
+ interrupts = <25>;
+ ti,hwmods = "dss_dispc";
+ };
+
+ rfbi: encoder@48050800 {
+ compatible = "ti,omap2-rfbi";
+ reg = <0x48050800 0x400>;
+ status = "disabled";
+ ti,hwmods = "dss_rfbi";
+ };
+
+ venc: encoder@48050c00 {
+ compatible = "ti,omap2-venc";
+ reg = <0x48050c00 0x400>;
+ status = "disabled";
+ ti,hwmods = "dss_venc";
+ };
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap2420-clocks.dtsi b/src/arm/ti/omap/omap2420-clocks.dtsi
new file mode 100644
index 0000000..00a7a19
--- /dev/null
+++ b/src/arm/ti/omap/omap2420-clocks.dtsi
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP2420 clock data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ */
+
+&prcm_clocks {
+ sys_clkout2_src_gate: sys_clkout2_src_gate@70 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clocks = <&core_ck>;
+ ti,bit-shift = <15>;
+ reg = <0x0070>;
+ };
+
+ sys_clkout2_src_mux: sys_clkout2_src_mux@70 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0070>;
+ };
+
+ sys_clkout2_src: sys_clkout2_src {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&sys_clkout2_src_gate>, <&sys_clkout2_src_mux>;
+ };
+
+ sys_clkout2: sys_clkout2@70 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&sys_clkout2_src>;
+ ti,bit-shift = <11>;
+ ti,max-div = <64>;
+ reg = <0x0070>;
+ ti,index-power-of-two;
+ };
+
+ dsp_gate_ick: dsp_gate_ick@810 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-interface-clock";
+ clocks = <&dsp_fck>;
+ ti,bit-shift = <1>;
+ reg = <0x0810>;
+ };
+
+ dsp_div_ick: dsp_div_ick@840 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clocks = <&dsp_fck>;
+ ti,bit-shift = <5>;
+ ti,max-div = <3>;
+ reg = <0x0840>;
+ ti,index-starts-at-one;
+ };
+
+ dsp_ick: dsp_ick {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&dsp_gate_ick>, <&dsp_div_ick>;
+ };
+
+ iva1_gate_ifck: iva1_gate_ifck@800 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&core_ck>;
+ ti,bit-shift = <10>;
+ reg = <0x0800>;
+ };
+
+ iva1_div_ifck: iva1_div_ifck@840 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clocks = <&core_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0840>;
+ ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
+ };
+
+ iva1_ifck: iva1_ifck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&iva1_gate_ifck>, <&iva1_div_ifck>;
+ };
+
+ iva1_ifck_div: iva1_ifck_div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&iva1_ifck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ iva1_mpu_int_ifck: iva1_mpu_int_ifck@800 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&iva1_ifck_div>;
+ ti,bit-shift = <8>;
+ reg = <0x0800>;
+ };
+
+ wdt3_ick: wdt3_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <28>;
+ reg = <0x0210>;
+ };
+
+ wdt3_fck: wdt3_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <28>;
+ reg = <0x0200>;
+ };
+
+ mmc_ick: mmc_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <26>;
+ reg = <0x0210>;
+ };
+
+ mmc_fck: mmc_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_96m_ck>;
+ ti,bit-shift = <26>;
+ reg = <0x0200>;
+ };
+
+ eac_ick: eac_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <24>;
+ reg = <0x0210>;
+ };
+
+ eac_fck: eac_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_96m_ck>;
+ ti,bit-shift = <24>;
+ reg = <0x0200>;
+ };
+
+ i2c1_fck: i2c1_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_12m_ck>;
+ ti,bit-shift = <19>;
+ reg = <0x0200>;
+ };
+
+ i2c2_fck: i2c2_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_12m_ck>;
+ ti,bit-shift = <20>;
+ reg = <0x0200>;
+ };
+
+ vlynq_ick: vlynq_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&core_l3_ck>;
+ ti,bit-shift = <3>;
+ reg = <0x0210>;
+ };
+
+ vlynq_gate_fck: vlynq_gate_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&core_ck>;
+ ti,bit-shift = <3>;
+ reg = <0x0200>;
+ };
+
+ core_d18_ck: core_d18_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&core_ck>;
+ clock-mult = <1>;
+ clock-div = <18>;
+ };
+
+ vlynq_mux_fck: vlynq_mux_fck@240 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_96m_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&dummy_ck>, <&core_d6_ck>, <&dummy_ck>, <&core_d8_ck>, <&core_d9_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d12_ck>, <&dummy_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d16_ck>, <&dummy_ck>, <&core_d18_ck>;
+ ti,bit-shift = <15>;
+ reg = <0x0240>;
+ };
+
+ vlynq_fck: vlynq_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&vlynq_gate_fck>, <&vlynq_mux_fck>;
+ };
+};
+
+&prcm_clockdomains {
+ gfx_clkdm: gfx_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&gfx_ick>;
+ };
+
+ core_l3_clkdm: core_l3_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&cam_fck>, <&vlynq_ick>, <&usb_fck>;
+ };
+
+ wkup_clkdm: wkup_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
+ <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
+ <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>;
+ };
+
+ iva1_clkdm: iva1_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&iva1_mpu_int_ifck>;
+ };
+
+ dss_clkdm: dss_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&dss_ick>, <&dss_54m_fck>;
+ };
+
+ core_l4_clkdm: core_l4_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
+ <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
+ <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
+ <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcspi1_ick>,
+ <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
+ <&uart1_ick>, <&uart1_fck>, <&uart2_ick>, <&uart2_fck>,
+ <&uart3_ick>, <&uart3_fck>, <&cam_ick>,
+ <&mailboxes_ick>, <&wdt4_ick>, <&wdt4_fck>,
+ <&wdt3_ick>, <&wdt3_fck>, <&mspro_ick>, <&mspro_fck>,
+ <&mmc_ick>, <&mmc_fck>, <&fac_ick>, <&fac_fck>,
+ <&eac_ick>, <&eac_fck>, <&hdq_ick>, <&hdq_fck>,
+ <&i2c1_ick>, <&i2c1_fck>, <&i2c2_ick>, <&i2c2_fck>,
+ <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
+ <&pka_ick>;
+ };
+};
+
+&func_96m_ck {
+ compatible = "fixed-factor-clock";
+ clocks = <&apll96_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+};
+
+&dsp_div_fck {
+ ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
+};
+
+&ssi_ssr_sst_div_fck {
+ ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+};
diff --git a/src/arm/ti/omap/omap2420-h4.dts b/src/arm/ti/omap/omap2420-h4.dts
new file mode 100644
index 0000000..5acf5dd
--- /dev/null
+++ b/src/arm/ti/omap/omap2420-h4.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap2420.dtsi"
+
+/ {
+ model = "TI OMAP2420 H4 board";
+ compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x4000000>; /* 64 MB */
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x08000000 0x04000000>;
+
+ nor@0,0 {
+ compatible = "cfi-flash";
+ linux,mtd-name = "intel,ge28f256l18b85";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0 0x04000000>;
+ bank-width = <2>;
+
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <10>;
+ gpmc,cs-rd-off-ns = <160>;
+ gpmc,cs-wr-off-ns = <160>;
+ gpmc,adv-on-ns = <20>;
+ gpmc,adv-rd-off-ns = <50>;
+ gpmc,adv-wr-off-ns = <50>;
+ gpmc,oe-on-ns = <60>;
+ gpmc,oe-off-ns = <120>;
+ gpmc,we-on-ns = <60>;
+ gpmc,we-off-ns = <120>;
+ gpmc,rd-cycle-ns = <170>;
+ gpmc,wr-cycle-ns = <170>;
+ gpmc,access-ns = <150>;
+ gpmc,page-burst-access-ns = <10>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0 0x20000>;
+ };
+ partition@20000 {
+ label = "params";
+ reg = <0x20000 0x20000>;
+ };
+ partition@40000 {
+ label = "kernel";
+ reg = <0x40000 0x200000>;
+ };
+ partition@240000 {
+ label = "file-system";
+ reg = <0x240000 0x3dc0000>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap2420-n800.dts b/src/arm/ti/omap/omap2420-n800.dts
new file mode 100644
index 0000000..f06d767
--- /dev/null
+++ b/src/arm/ti/omap/omap2420-n800.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "omap2420-n8x0-common.dtsi"
+
+/ {
+ model = "Nokia N800";
+ compatible = "nokia,n800", "nokia,n8x0", "ti,omap2420", "ti,omap2";
+};
diff --git a/src/arm/ti/omap/omap2420-n810-wimax.dts b/src/arm/ti/omap/omap2420-n810-wimax.dts
new file mode 100644
index 0000000..ac9acbd
--- /dev/null
+++ b/src/arm/ti/omap/omap2420-n810-wimax.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "omap2420-n8x0-common.dtsi"
+
+/ {
+ model = "Nokia N810 WiMax";
+ compatible = "nokia,n810-wimax", "nokia,n8x0", "ti,omap2420", "ti,omap2";
+};
diff --git a/src/arm/ti/omap/omap2420-n810.dts b/src/arm/ti/omap/omap2420-n810.dts
new file mode 100644
index 0000000..3bf8175
--- /dev/null
+++ b/src/arm/ti/omap/omap2420-n810.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "omap2420-n8x0-common.dtsi"
+
+/ {
+ model = "Nokia N810";
+ compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2";
+
+ vio_ape: vio_ape {
+ compatible = "regulator-fixed";
+ regulator-name = "vio_ape";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ v28_aic: v28_aic {
+ compatible = "regulator-fixed";
+ regulator-name = "v28_aic";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+};
+
+&omap2420_pmx {
+ mcbsp2_pins: mcbsp2-pins {
+ pinctrl-single,pins = <
+ OMAP2420_CORE_IOPAD(0x0124, PIN_INPUT | MUX_MODE1) /* eac_ac_sclk.mcbsp2_clkx */
+ OMAP2420_CORE_IOPAD(0x0125, PIN_INPUT | MUX_MODE1) /* eac_ac_fs.mcbsp2_fsx */
+ OMAP2420_CORE_IOPAD(0x0126, PIN_INPUT | MUX_MODE1) /* eac_ac_din.mcbsp2_dr */
+ OMAP2420_CORE_IOPAD(0x0127, PIN_OUTPUT | MUX_MODE1) /* eac_ac_dout.mcbsp2_dx */
+ >;
+ };
+
+ aic33_pins: aic33-pins {
+ pinctrl-single,pins = <
+ OMAP2420_CORE_IOPAD(0x0129, PIN_OUTPUT | MUX_MODE3) /* eac_ac_rst.gpio118 */
+ OMAP2420_CORE_IOPAD(0x00e8, PIN_OUTPUT | MUX_MODE2) /* vlynq_tx1.sys_clkout2 */
+ >;
+ };
+};
+
+&i2c2 {
+ aic33@18 {
+ compatible = "ti,tlv320aic33";
+ reg = <0x18>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&aic33_pins>;
+
+ reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */
+
+ ai3x-gpio-func = <
+ 10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */
+ 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
+ >;
+ ai3x-micbias-vg = <1>; /* 2V */
+
+ AVDD-supply = <&v28_aic>;
+ DRVDD-supply = <&v28_aic>;
+ IOVDD-supply = <&vio_ape>;
+ DVDD-supply = <&vio_ape>;
+
+ assigned-clocks = <&sys_clkout2_src>, <&sys_clkout2>;
+ assigned-clock-parents = <&func_96m_ck>;
+ assigned-clock-rates = <0>, <12000000>;
+ };
+};
+
+&mcbsp2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+
+ status = "okay";
+};
diff --git a/src/arm/ti/omap/omap2420-n8x0-common.dtsi b/src/arm/ti/omap/omap2420-n8x0-common.dtsi
new file mode 100644
index 0000000..63b0b49
--- /dev/null
+++ b/src/arm/ti/omap/omap2420-n8x0-common.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "omap2420.dtsi"
+
+/ {
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>; /* 128 MB */
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ ocp {
+ i2c0 {
+ compatible = "i2c-cbus-gpio";
+ gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */
+ &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */
+ &gpio3 0 GPIO_ACTIVE_HIGH /* gpio64 sel */
+ >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ retu: retu@1 {
+ compatible = "nokia,retu";
+ interrupt-parent = <&gpio4>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+ reg = <0x1>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+
+ pmic@72 {
+ compatible = "menelaus";
+ reg = <0x72>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&gpmc {
+ ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
+
+ /* gpio-irq for dma: 26 */
+
+ onenand@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ti,omap2-onenand";
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
+
+ gpmc,sync-read;
+ gpmc,burst-length = <16>;
+ gpmc,burst-read;
+ gpmc,burst-wrap;
+ gpmc,device-width = <2>;
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <127>;
+ gpmc,cs-wr-off-ns = <109>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <18>;
+ gpmc,adv-wr-off-ns = <18>;
+ gpmc,oe-on-ns = <27>;
+ gpmc,oe-off-ns = <127>;
+ gpmc,we-on-ns = <27>;
+ gpmc,we-off-ns = <72>;
+ gpmc,rd-cycle-ns = <145>;
+ gpmc,wr-cycle-ns = <136>;
+ gpmc,access-ns = <118>;
+ gpmc,page-burst-access-ns = <27>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <9>;
+ gpmc,sync-clk-ps = <27000>;
+
+ /* MTD partition table corresponding to old board-n8x0 file. */
+ partition@0 {
+ label = "bootloader";
+ reg = <0x00000000 0x00020000>;
+ read-only;
+ };
+ partition@1 {
+ label = "config";
+ reg = <0x00020000 0x00060000>;
+ };
+ partition@2 {
+ label = "kernel";
+ reg = <0x00080000 0x00200000>;
+ };
+ partition@3 {
+ label = "initfs";
+ reg = <0x00280000 0x00400000>;
+ };
+ partition@4 {
+ label = "rootfs";
+ reg = <0x00680000 0x0f980000>;
+ };
+ partition@5 {
+ label = "omap2-onenand";
+ reg = <0x00000000 0x10000000>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap2420.dtsi b/src/arm/ti/omap/omap2420.dtsi
new file mode 100644
index 0000000..821da51
--- /dev/null
+++ b/src/arm/ti/omap/omap2420.dtsi
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP2420 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "omap2.dtsi"
+
+/ {
+ compatible = "ti,omap2420", "ti,omap2";
+
+ ocp {
+ l4: l4@48000000 {
+ compatible = "ti,omap2-l4", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48000000 0x100000>;
+
+ prcm: prcm@8000 {
+ compatible = "ti,omap2-prcm";
+ reg = <0x8000 0x1000>;
+
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prcm_clockdomains: clockdomains {
+ };
+ };
+
+ scm: scm@0 {
+ compatible = "ti,omap2-scm", "simple-bus";
+ reg = <0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #pinctrl-cells = <1>;
+ ranges = <0 0x0 0x1000>;
+
+ omap2420_pmx: pinmux@30 {
+ compatible = "ti,omap2420-padconf",
+ "pinctrl-single";
+ reg = <0x30 0x0113>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <8>;
+ pinctrl-single,function-mask = <0x3f>;
+ };
+
+ scm_conf: scm_conf@270 {
+ compatible = "syscon";
+ reg = <0x270 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ scm_clockdomains: clockdomains {
+ };
+ };
+
+ target-module@4000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4000 0x4>,
+ <0x4004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ clocks = <&func_32k_ck>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+
+ counter32k: counter@0 {
+ compatible = "ti,omap-counter32k";
+ reg = <0 0x20>;
+ };
+ };
+ };
+
+ gpio1: gpio@48018000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x48018000 0x200>;
+ interrupts = <29>;
+ ti,hwmods = "gpio1";
+ ti,gpio-always-on;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio@4801a000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x4801a000 0x200>;
+ interrupts = <30>;
+ ti,hwmods = "gpio2";
+ ti,gpio-always-on;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio3: gpio@4801c000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x4801c000 0x200>;
+ interrupts = <31>;
+ ti,hwmods = "gpio3";
+ ti,gpio-always-on;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio4: gpio@4801e000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x4801e000 0x200>;
+ interrupts = <32>;
+ ti,hwmods = "gpio4";
+ ti,gpio-always-on;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpmc: gpmc@6800a000 {
+ compatible = "ti,omap2420-gpmc";
+ reg = <0x6800a000 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupts = <20>;
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ ti,hwmods = "gpmc";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ mcbsp1: mcbsp@48074000 {
+ compatible = "ti,omap2420-mcbsp";
+ reg = <0x48074000 0xff>;
+ reg-names = "mpu";
+ interrupts = <59>, /* TX interrupt */
+ <60>; /* RX interrupt */
+ interrupt-names = "tx", "rx";
+ ti,hwmods = "mcbsp1";
+ dmas = <&sdma 31>,
+ <&sdma 32>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ mcbsp2: mcbsp@48076000 {
+ compatible = "ti,omap2420-mcbsp";
+ reg = <0x48076000 0xff>;
+ reg-names = "mpu";
+ interrupts = <62>, /* TX interrupt */
+ <63>; /* RX interrupt */
+ interrupt-names = "tx", "rx";
+ ti,hwmods = "mcbsp2";
+ dmas = <&sdma 33>,
+ <&sdma 34>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ msdi1: mmc@4809c000 {
+ compatible = "ti,omap2420-mmc";
+ ti,hwmods = "msdi1";
+ reg = <0x4809c000 0x80>;
+ interrupts = <83>;
+ dmas = <&sdma 61 &sdma 62>;
+ dma-names = "tx", "rx";
+ };
+
+ mailbox: mailbox@48094000 {
+ compatible = "ti,omap2-mailbox";
+ reg = <0x48094000 0x200>;
+ interrupts = <26>, <34>;
+ ti,hwmods = "mailbox";
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <6>;
+ mbox_dsp: mbox-dsp {
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <1 0 0>;
+ };
+ mbox_iva: mbox-iva {
+ ti,mbox-tx = <2 1 3>;
+ ti,mbox-rx = <3 1 3>;
+ };
+ };
+
+ timer1_target: target-module@48028000 {
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x48028000 0x4>,
+ <0x48028010 0x4>,
+ <0x48028014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&gpt1_fck>, <&gpt1_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x48028000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,omap2420-timer";
+ reg = <0 0x400>;
+ interrupts = <37>;
+ ti,timer-alwon;
+ };
+ };
+
+ wd_timer2: wdt@48022000 {
+ compatible = "ti,omap2-wdt";
+ ti,hwmods = "wd_timer2";
+ reg = <0x48022000 0x80>;
+ };
+ };
+};
+
+&i2c1 {
+ compatible = "ti,omap2420-i2c";
+};
+
+&i2c2 {
+ compatible = "ti,omap2420-i2c";
+};
+
+#include "omap24xx-clocks.dtsi"
+#include "omap2420-clocks.dtsi"
+
+/* Preferred always-on timer for clockevent */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&gpt1_fck>;
+ assigned-clock-parents = <&func_32k_ck>;
+ };
+};
diff --git a/src/arm/ti/omap/omap2430-clocks.dtsi b/src/arm/ti/omap/omap2430-clocks.dtsi
new file mode 100644
index 0000000..4e5ab51
--- /dev/null
+++ b/src/arm/ti/omap/omap2430-clocks.dtsi
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP2430 clock data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ */
+
+&scm_clocks {
+ mcbsp3_mux_fck: mcbsp3_mux_fck@78 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_96m_ck>, <&mcbsp_clks>;
+ reg = <0x78>;
+ };
+
+ mcbsp3_fck: mcbsp3_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
+ };
+
+ mcbsp4_mux_fck: mcbsp4_mux_fck@78 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_96m_ck>, <&mcbsp_clks>;
+ ti,bit-shift = <2>;
+ reg = <0x78>;
+ };
+
+ mcbsp4_fck: mcbsp4_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
+ };
+
+ mcbsp5_mux_fck: mcbsp5_mux_fck@78 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_96m_ck>, <&mcbsp_clks>;
+ ti,bit-shift = <4>;
+ reg = <0x78>;
+ };
+
+ mcbsp5_fck: mcbsp5_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
+ };
+};
+
+&prcm_clocks {
+ iva2_1_gate_ick: iva2_1_gate_ick@800 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&dsp_fck>;
+ ti,bit-shift = <0>;
+ reg = <0x0800>;
+ };
+
+ iva2_1_div_ick: iva2_1_div_ick@840 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clocks = <&dsp_fck>;
+ ti,bit-shift = <5>;
+ ti,max-div = <3>;
+ reg = <0x0840>;
+ ti,index-starts-at-one;
+ };
+
+ iva2_1_ick: iva2_1_ick {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&iva2_1_gate_ick>, <&iva2_1_div_ick>;
+ };
+
+ mdm_gate_ick: mdm_gate_ick@c10 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-interface-clock";
+ clocks = <&core_ck>;
+ ti,bit-shift = <0>;
+ reg = <0x0c10>;
+ };
+
+ mdm_div_ick: mdm_div_ick@c40 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clocks = <&core_ck>;
+ reg = <0x0c40>;
+ ti,dividers = <0>, <1>, <0>, <0>, <4>, <0>, <6>, <0>, <0>, <9>;
+ };
+
+ mdm_ick: mdm_ick {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&mdm_gate_ick>, <&mdm_div_ick>;
+ };
+
+ mdm_osc_ck: mdm_osc_ck@c00 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&osc_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0c00>;
+ };
+
+ mcbsp3_ick: mcbsp3_ick@214 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <3>;
+ reg = <0x0214>;
+ };
+
+ mcbsp3_gate_fck: mcbsp3_gate_fck@204 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&mcbsp_clks>;
+ ti,bit-shift = <3>;
+ reg = <0x0204>;
+ };
+
+ mcbsp4_ick: mcbsp4_ick@214 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <4>;
+ reg = <0x0214>;
+ };
+
+ mcbsp4_gate_fck: mcbsp4_gate_fck@204 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&mcbsp_clks>;
+ ti,bit-shift = <4>;
+ reg = <0x0204>;
+ };
+
+ mcbsp5_ick: mcbsp5_ick@214 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <5>;
+ reg = <0x0214>;
+ };
+
+ mcbsp5_gate_fck: mcbsp5_gate_fck@204 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&mcbsp_clks>;
+ ti,bit-shift = <5>;
+ reg = <0x0204>;
+ };
+
+ mcspi3_ick: mcspi3_ick@214 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <9>;
+ reg = <0x0214>;
+ };
+
+ mcspi3_fck: mcspi3_fck@204 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_48m_ck>;
+ ti,bit-shift = <9>;
+ reg = <0x0204>;
+ };
+
+ icr_ick: icr_ick@410 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <6>;
+ reg = <0x0410>;
+ };
+
+ i2chs1_fck: i2chs1_fck@204 {
+ #clock-cells = <0>;
+ compatible = "ti,omap2430-interface-clock";
+ clocks = <&func_96m_ck>;
+ ti,bit-shift = <19>;
+ reg = <0x0204>;
+ };
+
+ i2chs2_fck: i2chs2_fck@204 {
+ #clock-cells = <0>;
+ compatible = "ti,omap2430-interface-clock";
+ clocks = <&func_96m_ck>;
+ ti,bit-shift = <20>;
+ reg = <0x0204>;
+ };
+
+ usbhs_ick: usbhs_ick@214 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&core_l3_ck>;
+ ti,bit-shift = <6>;
+ reg = <0x0214>;
+ };
+
+ mmchs1_ick: mmchs1_ick@214 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <7>;
+ reg = <0x0214>;
+ };
+
+ mmchs1_fck: mmchs1_fck@204 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_96m_ck>;
+ ti,bit-shift = <7>;
+ reg = <0x0204>;
+ };
+
+ mmchs2_ick: mmchs2_ick@214 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0214>;
+ };
+
+ mmchs2_fck: mmchs2_fck@204 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_96m_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0204>;
+ };
+
+ gpio5_ick: gpio5_ick@214 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <10>;
+ reg = <0x0214>;
+ };
+
+ gpio5_fck: gpio5_fck@204 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <10>;
+ reg = <0x0204>;
+ };
+
+ mdm_intc_ick: mdm_intc_ick@214 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <11>;
+ reg = <0x0214>;
+ };
+
+ mmchsdb1_fck: mmchsdb1_fck@204 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <16>;
+ reg = <0x0204>;
+ };
+
+ mmchsdb2_fck: mmchsdb2_fck@204 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <17>;
+ reg = <0x0204>;
+ };
+};
+
+&prcm_clockdomains {
+ gfx_clkdm: gfx_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&gfx_ick>;
+ };
+
+ core_l3_clkdm: core_l3_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&cam_fck>, <&usb_fck>, <&usbhs_ick>;
+ };
+
+ wkup_clkdm: wkup_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
+ <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
+ <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>,
+ <&icr_ick>;
+ };
+
+ dss_clkdm: dss_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&dss_ick>, <&dss_54m_fck>;
+ };
+
+ core_l4_clkdm: core_l4_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
+ <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
+ <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
+ <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+ <&mcbsp4_ick>, <&mcbsp5_ick>, <&mcspi1_ick>,
+ <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
+ <&mcspi3_ick>, <&mcspi3_fck>, <&uart1_ick>,
+ <&uart1_fck>, <&uart2_ick>, <&uart2_fck>, <&uart3_ick>,
+ <&uart3_fck>, <&cam_ick>, <&mailboxes_ick>,
+ <&wdt4_ick>, <&wdt4_fck>, <&mspro_ick>, <&mspro_fck>,
+ <&fac_ick>, <&fac_fck>, <&hdq_ick>, <&hdq_fck>,
+ <&i2c1_ick>, <&i2chs1_fck>, <&i2c2_ick>, <&i2chs2_fck>,
+ <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
+ <&pka_ick>, <&mmchs1_ick>, <&mmchs1_fck>,
+ <&mmchs2_ick>, <&mmchs2_fck>, <&gpio5_ick>,
+ <&gpio5_fck>, <&mdm_intc_ick>, <&mmchsdb1_fck>,
+ <&mmchsdb2_fck>;
+ };
+
+ mdm_clkdm: mdm_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&mdm_osc_ck>;
+ };
+};
+
+&func_96m_ck {
+ compatible = "ti,mux-clock";
+ clocks = <&apll96_ck>, <&alt_ck>;
+ ti,bit-shift = <4>;
+ reg = <0x0540>;
+};
+
+&dsp_div_fck {
+ ti,max-div = <4>;
+ ti,index-starts-at-one;
+};
+
+&ssi_ssr_sst_div_fck {
+ ti,max-div = <5>;
+ ti,index-starts-at-one;
+};
diff --git a/src/arm/ti/omap/omap2430-sdp.dts b/src/arm/ti/omap/omap2430-sdp.dts
new file mode 100644
index 0000000..2070706
--- /dev/null
+++ b/src/arm/ti/omap/omap2430-sdp.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap2430.dtsi"
+
+/ {
+ model = "TI OMAP2430 SDP";
+ compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>; /* 128 MB */
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ };
+};
+
+#include "twl4030.dtsi"
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+};
+
+&gpmc {
+ ranges = <5 0 0x08000000 0x01000000>;
+ ethernet@gpmc {
+ compatible = "smsc,lan91c94";
+ interrupt-parent = <&gpio5>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>; /* gpio149 */
+ reg = <5 0x300 0xf>;
+ bank-width = <2>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,mux-add-data = <2>;
+ gpmc,device-width = <1>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+ gpmc,cs-on-ns = <6>;
+ gpmc,cs-rd-off-ns = <187>;
+ gpmc,cs-wr-off-ns = <187>;
+ gpmc,adv-on-ns = <18>;
+ gpmc,adv-rd-off-ns = <48>;
+ gpmc,adv-wr-off-ns = <48>;
+ gpmc,oe-on-ns = <60>;
+ gpmc,oe-off-ns = <169>;
+ gpmc,we-on-ns = <66>;
+ gpmc,we-off-ns = <169>;
+ gpmc,rd-cycle-ns = <187>;
+ gpmc,wr-cycle-ns = <187>;
+ gpmc,access-ns = <187>;
+ gpmc,page-burst-access-ns = <24>;
+ gpmc,bus-turnaround-ns = <24>;
+ gpmc,cycle2cycle-delay-ns = <24>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,wr-access-ns = <0>;
+ };
+};
+
diff --git a/src/arm/ti/omap/omap2430.dtsi b/src/arm/ti/omap/omap2430.dtsi
new file mode 100644
index 0000000..b9a9e6e
--- /dev/null
+++ b/src/arm/ti/omap/omap2430.dtsi
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP243x SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "omap2.dtsi"
+
+/ {
+ compatible = "ti,omap2430", "ti,omap2";
+
+ ocp {
+ l4_wkup: l4_wkup@49000000 {
+ compatible = "ti,omap2-l4-wkup", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x49000000 0x31000>;
+
+ prcm: prcm@6000 {
+ compatible = "ti,omap2-prcm";
+ reg = <0x6000 0x1000>;
+
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prcm_clockdomains: clockdomains {
+ };
+ };
+
+ scm: scm@2000 {
+ compatible = "ti,omap2-scm", "simple-bus";
+ reg = <0x2000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #pinctrl-cells = <1>;
+ ranges = <0 0x2000 0x1000>;
+
+ omap2430_pmx: pinmux@30 {
+ compatible = "ti,omap2430-padconf",
+ "pinctrl-single";
+ reg = <0x30 0x0154>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <8>;
+ pinctrl-single,function-mask = <0x3f>;
+ };
+
+ scm_conf: scm_conf@270 {
+ compatible = "syscon",
+ "simple-bus";
+ reg = <0x270 0x240>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x270 0x240>;
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pbias_regulator: pbias_regulator@230 {
+ compatible = "ti,pbias-omap2", "ti,pbias-omap";
+ reg = <0x230 0x4>;
+ syscon = <&scm_conf>;
+ pbias_mmc_reg: pbias_mmc_omap2430 {
+ regulator-name = "pbias_mmc_omap2430";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+
+ scm_clockdomains: clockdomains {
+ };
+ };
+
+ target-module@20000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x20000 0x4>,
+ <0x20004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ clocks = <&func_32k_ck>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x20000 0x1000>;
+
+ counter32k: counter@0 {
+ compatible = "ti,omap-counter32k";
+ reg = <0 0x20>;
+ };
+ };
+ };
+
+ gpio1: gpio@4900c000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x4900c000 0x200>;
+ interrupts = <29>;
+ ti,hwmods = "gpio1";
+ ti,gpio-always-on;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio@4900e000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x4900e000 0x200>;
+ interrupts = <30>;
+ ti,hwmods = "gpio2";
+ ti,gpio-always-on;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio3: gpio@49010000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x49010000 0x200>;
+ interrupts = <31>;
+ ti,hwmods = "gpio3";
+ ti,gpio-always-on;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio4: gpio@49012000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x49012000 0x200>;
+ interrupts = <32>;
+ ti,hwmods = "gpio4";
+ ti,gpio-always-on;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio5: gpio@480b6000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x480b6000 0x200>;
+ interrupts = <33>;
+ ti,hwmods = "gpio5";
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpmc: gpmc@6e000000 {
+ compatible = "ti,omap2430-gpmc";
+ reg = <0x6e000000 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupts = <20>;
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ ti,hwmods = "gpmc";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ mcbsp1: mcbsp@48074000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x48074000 0xff>;
+ reg-names = "mpu";
+ interrupts = <64>, /* OCP compliant interrupt */
+ <59>, /* TX interrupt */
+ <60>, /* RX interrupt */
+ <61>; /* RX overflow interrupt */
+ interrupt-names = "common", "tx", "rx", "rx_overflow";
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp1";
+ dmas = <&sdma 31>,
+ <&sdma 32>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ mcbsp2: mcbsp@48076000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x48076000 0xff>;
+ reg-names = "mpu";
+ interrupts = <16>, /* OCP compliant interrupt */
+ <62>, /* TX interrupt */
+ <63>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp2";
+ dmas = <&sdma 33>,
+ <&sdma 34>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ mcbsp3: mcbsp@4808c000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x4808c000 0xff>;
+ reg-names = "mpu";
+ interrupts = <17>, /* OCP compliant interrupt */
+ <89>, /* TX interrupt */
+ <90>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp3";
+ dmas = <&sdma 17>,
+ <&sdma 18>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ mcbsp4: mcbsp@4808e000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x4808e000 0xff>;
+ reg-names = "mpu";
+ interrupts = <18>, /* OCP compliant interrupt */
+ <54>, /* TX interrupt */
+ <55>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp4";
+ dmas = <&sdma 19>,
+ <&sdma 20>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ mcbsp5: mcbsp@48096000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x48096000 0xff>;
+ reg-names = "mpu";
+ interrupts = <19>, /* OCP compliant interrupt */
+ <81>, /* TX interrupt */
+ <82>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp5";
+ dmas = <&sdma 21>,
+ <&sdma 22>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ mmc1: mmc@4809c000 {
+ compatible = "ti,omap2-hsmmc";
+ reg = <0x4809c000 0x200>;
+ interrupts = <83>;
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ dmas = <&sdma 61>, <&sdma 62>;
+ dma-names = "tx", "rx";
+ pbias-supply = <&pbias_mmc_reg>;
+ };
+
+ mmc2: mmc@480b4000 {
+ compatible = "ti,omap2-hsmmc";
+ reg = <0x480b4000 0x200>;
+ interrupts = <86>;
+ ti,hwmods = "mmc2";
+ dmas = <&sdma 47>, <&sdma 48>;
+ dma-names = "tx", "rx";
+ };
+
+ mailbox: mailbox@48094000 {
+ compatible = "ti,omap2-mailbox";
+ reg = <0x48094000 0x200>;
+ interrupts = <26>;
+ ti,hwmods = "mailbox";
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <6>;
+ mbox_dsp: mbox-dsp {
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <1 0 0>;
+ };
+ };
+
+ timer1_target: target-module@49018000 {
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x49018000 0x4>,
+ <0x49018010 0x4>,
+ <0x49018014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&gpt1_fck>, <&gpt1_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49018000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,omap2420-timer";
+ reg = <0 0x400>;
+ interrupts = <37>;
+ ti,timer-alwon;
+ };
+ };
+
+ mcspi3: spi@480b8000 {
+ compatible = "ti,omap2-mcspi";
+ ti,hwmods = "mcspi3";
+ reg = <0x480b8000 0x100>;
+ interrupts = <91>;
+ dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
+
+ usb_otg_hs: usb_otg_hs@480ac000 {
+ compatible = "ti,omap2-musb";
+ ti,hwmods = "usb_otg_hs";
+ reg = <0x480ac000 0x1000>;
+ interrupts = <93>;
+ };
+
+ wd_timer2: wdt@49016000 {
+ compatible = "ti,omap2-wdt";
+ ti,hwmods = "wd_timer2";
+ reg = <0x49016000 0x80>;
+ };
+ };
+};
+
+&sdma {
+ compatible = "ti,omap2430-sdma", "ti,omap-sdma";
+};
+
+&i2c1 {
+ compatible = "ti,omap2430-i2c";
+};
+
+&i2c2 {
+ compatible = "ti,omap2430-i2c";
+};
+
+#include "omap24xx-clocks.dtsi"
+#include "omap2430-clocks.dtsi"
+
+/* Preferred always-on timer for clockevent */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&gpt1_fck>;
+ assigned-clock-parents = <&func_32k_ck>;
+ };
+};
diff --git a/src/arm/ti/omap/omap24xx-clocks.dtsi b/src/arm/ti/omap/omap24xx-clocks.dtsi
new file mode 100644
index 0000000..07af87e
--- /dev/null
+++ b/src/arm/ti/omap/omap24xx-clocks.dtsi
@@ -0,0 +1,1241 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP24xx clock data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ */
+&scm_clocks {
+ mcbsp1_mux_fck: mcbsp1_mux_fck@4 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_96m_ck>, <&mcbsp_clks>;
+ ti,bit-shift = <2>;
+ reg = <0x4>;
+ };
+
+ mcbsp1_fck: mcbsp1_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
+ };
+
+ mcbsp2_mux_fck: mcbsp2_mux_fck@4 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_96m_ck>, <&mcbsp_clks>;
+ ti,bit-shift = <6>;
+ reg = <0x4>;
+ };
+
+ mcbsp2_fck: mcbsp2_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
+ };
+};
+
+&prcm_clocks {
+ func_32k_ck: func_32k_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ secure_32k_ck: secure_32k_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ virt_12m_ck: virt_12m_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+
+ virt_13m_ck: virt_13m_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ };
+
+ virt_19200000_ck: virt_19200000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <19200000>;
+ };
+
+ virt_26m_ck: virt_26m_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+
+ aplls_clkin_ck: aplls_clkin_ck@540 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&virt_19200000_ck>, <&virt_26m_ck>, <&virt_13m_ck>, <&virt_12m_ck>;
+ ti,bit-shift = <23>;
+ reg = <0x0540>;
+ };
+
+ aplls_clkin_x2_ck: aplls_clkin_x2_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&aplls_clkin_ck>;
+ clock-mult = <2>;
+ clock-div = <1>;
+ };
+
+ osc_ck: osc_ck@60 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&aplls_clkin_ck>, <&aplls_clkin_x2_ck>;
+ ti,bit-shift = <6>;
+ reg = <0x0060>;
+ ti,index-starts-at-one;
+ };
+
+ sys_ck: sys_ck@60 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&osc_ck>;
+ ti,bit-shift = <6>;
+ ti,max-div = <3>;
+ reg = <0x0060>;
+ ti,index-starts-at-one;
+ };
+
+ alt_ck: alt_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <54000000>;
+ };
+
+ mcbsp_clks: mcbsp_clks {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0x0>;
+ };
+
+ dpll_ck: dpll_ck@500 {
+ #clock-cells = <0>;
+ compatible = "ti,omap2-dpll-core-clock";
+ clocks = <&sys_ck>, <&sys_ck>;
+ reg = <0x0500>, <0x0540>;
+ };
+
+ apll96_ck: apll96_ck@500 {
+ #clock-cells = <0>;
+ compatible = "ti,omap2-apll-clock";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <2>;
+ ti,idlest-shift = <8>;
+ ti,clock-frequency = <96000000>;
+ reg = <0x0500>, <0x0530>, <0x0520>;
+ };
+
+ apll54_ck: apll54_ck@500 {
+ #clock-cells = <0>;
+ compatible = "ti,omap2-apll-clock";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <6>;
+ ti,idlest-shift = <9>;
+ ti,clock-frequency = <54000000>;
+ reg = <0x0500>, <0x0530>, <0x0520>;
+ };
+
+ func_54m_ck: func_54m_ck@540 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&apll54_ck>, <&alt_ck>;
+ ti,bit-shift = <5>;
+ reg = <0x0540>;
+ };
+
+ core_ck: core_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ func_96m_ck: func_96m_ck@540 {
+ #clock-cells = <0>;
+ };
+
+ apll96_d2_ck: apll96_d2_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&apll96_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ func_48m_ck: func_48m_ck@540 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&apll96_d2_ck>, <&alt_ck>;
+ ti,bit-shift = <3>;
+ reg = <0x0540>;
+ };
+
+ func_12m_ck: func_12m_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&func_48m_ck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ sys_clkout_src_gate: sys_clkout_src_gate@70 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clocks = <&core_ck>;
+ ti,bit-shift = <7>;
+ reg = <0x0070>;
+ };
+
+ sys_clkout_src_mux: sys_clkout_src_mux@70 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
+ reg = <0x0070>;
+ };
+
+ sys_clkout_src: sys_clkout_src {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&sys_clkout_src_gate>, <&sys_clkout_src_mux>;
+ };
+
+ sys_clkout: sys_clkout@70 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&sys_clkout_src>;
+ ti,bit-shift = <3>;
+ ti,max-div = <64>;
+ reg = <0x0070>;
+ ti,index-power-of-two;
+ };
+
+ emul_ck: emul_ck@78 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&func_54m_ck>;
+ ti,bit-shift = <0>;
+ reg = <0x0078>;
+ };
+
+ mpu_ck: mpu_ck@140 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&core_ck>;
+ ti,max-div = <31>;
+ reg = <0x0140>;
+ ti,index-starts-at-one;
+ };
+
+ dsp_gate_fck: dsp_gate_fck@800 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&core_ck>;
+ ti,bit-shift = <0>;
+ reg = <0x0800>;
+ };
+
+ dsp_div_fck: dsp_div_fck@840 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clocks = <&core_ck>;
+ reg = <0x0840>;
+ };
+
+ dsp_fck: dsp_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&dsp_gate_fck>, <&dsp_div_fck>;
+ };
+
+ core_l3_ck: core_l3_ck@240 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&core_ck>;
+ ti,max-div = <31>;
+ reg = <0x0240>;
+ ti,index-starts-at-one;
+ };
+
+ gfx_3d_gate_fck: gfx_3d_gate_fck@300 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&core_l3_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x0300>;
+ };
+
+ gfx_3d_div_fck: gfx_3d_div_fck@340 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clocks = <&core_l3_ck>;
+ ti,max-div = <4>;
+ reg = <0x0340>;
+ ti,index-starts-at-one;
+ };
+
+ gfx_3d_fck: gfx_3d_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gfx_3d_gate_fck>, <&gfx_3d_div_fck>;
+ };
+
+ gfx_2d_gate_fck: gfx_2d_gate_fck@300 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&core_l3_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0300>;
+ };
+
+ gfx_2d_div_fck: gfx_2d_div_fck@340 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clocks = <&core_l3_ck>;
+ ti,max-div = <4>;
+ reg = <0x0340>;
+ ti,index-starts-at-one;
+ };
+
+ gfx_2d_fck: gfx_2d_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gfx_2d_gate_fck>, <&gfx_2d_div_fck>;
+ };
+
+ gfx_ick: gfx_ick@310 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&core_l3_ck>;
+ ti,bit-shift = <0>;
+ reg = <0x0310>;
+ };
+
+ l4_ck: l4_ck@240 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&core_l3_ck>;
+ ti,bit-shift = <5>;
+ ti,max-div = <3>;
+ reg = <0x0240>;
+ ti,index-starts-at-one;
+ };
+
+ dss_ick: dss_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-no-wait-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <0>;
+ reg = <0x0210>;
+ };
+
+ dss1_gate_fck: dss1_gate_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clocks = <&core_ck>;
+ ti,bit-shift = <0>;
+ reg = <0x0200>;
+ };
+
+ core_d2_ck: core_d2_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&core_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ core_d3_ck: core_d3_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&core_ck>;
+ clock-mult = <1>;
+ clock-div = <3>;
+ };
+
+ core_d4_ck: core_d4_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&core_ck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ core_d5_ck: core_d5_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&core_ck>;
+ clock-mult = <1>;
+ clock-div = <5>;
+ };
+
+ core_d6_ck: core_d6_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&core_ck>;
+ clock-mult = <1>;
+ clock-div = <6>;
+ };
+
+ dummy_ck: dummy_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ core_d8_ck: core_d8_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&core_ck>;
+ clock-mult = <1>;
+ clock-div = <8>;
+ };
+
+ core_d9_ck: core_d9_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&core_ck>;
+ clock-mult = <1>;
+ clock-div = <9>;
+ };
+
+ core_d12_ck: core_d12_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&core_ck>;
+ clock-mult = <1>;
+ clock-div = <12>;
+ };
+
+ core_d16_ck: core_d16_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&core_ck>;
+ clock-mult = <1>;
+ clock-div = <16>;
+ };
+
+ dss1_mux_fck: dss1_mux_fck@240 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&sys_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&core_d5_ck>, <&core_d6_ck>, <&core_d8_ck>, <&core_d9_ck>, <&core_d12_ck>, <&core_d16_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0240>;
+ };
+
+ dss1_fck: dss1_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&dss1_gate_fck>, <&dss1_mux_fck>;
+ };
+
+ dss2_gate_fck: dss2_gate_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clocks = <&func_48m_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0200>;
+ };
+
+ dss2_mux_fck: dss2_mux_fck@240 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&sys_ck>, <&func_48m_ck>;
+ ti,bit-shift = <13>;
+ reg = <0x0240>;
+ };
+
+ dss2_fck: dss2_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&dss2_gate_fck>, <&dss2_mux_fck>;
+ };
+
+ dss_54m_fck: dss_54m_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_54m_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x0200>;
+ };
+
+ ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck@204 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&core_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0204>;
+ };
+
+ ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck@240 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clocks = <&core_ck>;
+ ti,bit-shift = <20>;
+ reg = <0x0240>;
+ };
+
+ ssi_ssr_sst_fck: ssi_ssr_sst_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&ssi_ssr_sst_gate_fck>, <&ssi_ssr_sst_div_fck>;
+ };
+
+ usb_l4_gate_ick: usb_l4_gate_ick@214 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-interface-clock";
+ clocks = <&core_l3_ck>;
+ ti,bit-shift = <0>;
+ reg = <0x0214>;
+ };
+
+ usb_l4_div_ick: usb_l4_div_ick@240 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clocks = <&core_l3_ck>;
+ ti,bit-shift = <25>;
+ reg = <0x0240>;
+ ti,dividers = <0>, <1>, <2>, <0>, <4>;
+ };
+
+ usb_l4_ick: usb_l4_ick {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+ };
+
+ ssi_l4_ick: ssi_l4_ick@214 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0214>;
+ };
+
+ gpt1_ick: gpt1_ick@410 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <0>;
+ reg = <0x0410>;
+ };
+
+ gpt1_gate_fck: gpt1_gate_fck@400 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <0>;
+ reg = <0x0400>;
+ };
+
+ gpt1_mux_fck: gpt1_mux_fck@440 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+ reg = <0x0440>;
+ };
+
+ gpt1_fck: gpt1_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
+ };
+
+ gpt2_ick: gpt2_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <4>;
+ reg = <0x0210>;
+ };
+
+ gpt2_gate_fck: gpt2_gate_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <4>;
+ reg = <0x0200>;
+ };
+
+ gpt2_mux_fck: gpt2_mux_fck@244 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x0244>;
+ };
+
+ gpt2_fck: gpt2_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
+ };
+
+ gpt3_ick: gpt3_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <5>;
+ reg = <0x0210>;
+ };
+
+ gpt3_gate_fck: gpt3_gate_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <5>;
+ reg = <0x0200>;
+ };
+
+ gpt3_mux_fck: gpt3_mux_fck@244 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+ ti,bit-shift = <4>;
+ reg = <0x0244>;
+ };
+
+ gpt3_fck: gpt3_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
+ };
+
+ gpt4_ick: gpt4_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <6>;
+ reg = <0x0210>;
+ };
+
+ gpt4_gate_fck: gpt4_gate_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <6>;
+ reg = <0x0200>;
+ };
+
+ gpt4_mux_fck: gpt4_mux_fck@244 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+ ti,bit-shift = <6>;
+ reg = <0x0244>;
+ };
+
+ gpt4_fck: gpt4_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
+ };
+
+ gpt5_ick: gpt5_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <7>;
+ reg = <0x0210>;
+ };
+
+ gpt5_gate_fck: gpt5_gate_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <7>;
+ reg = <0x0200>;
+ };
+
+ gpt5_mux_fck: gpt5_mux_fck@244 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0244>;
+ };
+
+ gpt5_fck: gpt5_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
+ };
+
+ gpt6_ick: gpt6_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0210>;
+ };
+
+ gpt6_gate_fck: gpt6_gate_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0200>;
+ };
+
+ gpt6_mux_fck: gpt6_mux_fck@244 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+ ti,bit-shift = <10>;
+ reg = <0x0244>;
+ };
+
+ gpt6_fck: gpt6_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
+ };
+
+ gpt7_ick: gpt7_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <9>;
+ reg = <0x0210>;
+ };
+
+ gpt7_gate_fck: gpt7_gate_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <9>;
+ reg = <0x0200>;
+ };
+
+ gpt7_mux_fck: gpt7_mux_fck@244 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+ ti,bit-shift = <12>;
+ reg = <0x0244>;
+ };
+
+ gpt7_fck: gpt7_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
+ };
+
+ gpt8_ick: gpt8_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <10>;
+ reg = <0x0210>;
+ };
+
+ gpt8_gate_fck: gpt8_gate_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <10>;
+ reg = <0x0200>;
+ };
+
+ gpt8_mux_fck: gpt8_mux_fck@244 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+ ti,bit-shift = <14>;
+ reg = <0x0244>;
+ };
+
+ gpt8_fck: gpt8_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
+ };
+
+ gpt9_ick: gpt9_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <11>;
+ reg = <0x0210>;
+ };
+
+ gpt9_gate_fck: gpt9_gate_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <11>;
+ reg = <0x0200>;
+ };
+
+ gpt9_mux_fck: gpt9_mux_fck@244 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+ ti,bit-shift = <16>;
+ reg = <0x0244>;
+ };
+
+ gpt9_fck: gpt9_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
+ };
+
+ gpt10_ick: gpt10_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <12>;
+ reg = <0x0210>;
+ };
+
+ gpt10_gate_fck: gpt10_gate_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <12>;
+ reg = <0x0200>;
+ };
+
+ gpt10_mux_fck: gpt10_mux_fck@244 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+ ti,bit-shift = <18>;
+ reg = <0x0244>;
+ };
+
+ gpt10_fck: gpt10_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
+ };
+
+ gpt11_ick: gpt11_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <13>;
+ reg = <0x0210>;
+ };
+
+ gpt11_gate_fck: gpt11_gate_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <13>;
+ reg = <0x0200>;
+ };
+
+ gpt11_mux_fck: gpt11_mux_fck@244 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+ ti,bit-shift = <20>;
+ reg = <0x0244>;
+ };
+
+ gpt11_fck: gpt11_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
+ };
+
+ gpt12_ick: gpt12_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <14>;
+ reg = <0x0210>;
+ };
+
+ gpt12_gate_fck: gpt12_gate_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <14>;
+ reg = <0x0200>;
+ };
+
+ gpt12_mux_fck: gpt12_mux_fck@244 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+ ti,bit-shift = <22>;
+ reg = <0x0244>;
+ };
+
+ gpt12_fck: gpt12_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt12_gate_fck>, <&gpt12_mux_fck>;
+ };
+
+ mcbsp1_ick: mcbsp1_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <15>;
+ reg = <0x0210>;
+ };
+
+ mcbsp1_gate_fck: mcbsp1_gate_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&mcbsp_clks>;
+ ti,bit-shift = <15>;
+ reg = <0x0200>;
+ };
+
+ mcbsp2_ick: mcbsp2_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <16>;
+ reg = <0x0210>;
+ };
+
+ mcbsp2_gate_fck: mcbsp2_gate_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&mcbsp_clks>;
+ ti,bit-shift = <16>;
+ reg = <0x0200>;
+ };
+
+ mcspi1_ick: mcspi1_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <17>;
+ reg = <0x0210>;
+ };
+
+ mcspi1_fck: mcspi1_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_48m_ck>;
+ ti,bit-shift = <17>;
+ reg = <0x0200>;
+ };
+
+ mcspi2_ick: mcspi2_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <18>;
+ reg = <0x0210>;
+ };
+
+ mcspi2_fck: mcspi2_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_48m_ck>;
+ ti,bit-shift = <18>;
+ reg = <0x0200>;
+ };
+
+ uart1_ick: uart1_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <21>;
+ reg = <0x0210>;
+ };
+
+ uart1_fck: uart1_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_48m_ck>;
+ ti,bit-shift = <21>;
+ reg = <0x0200>;
+ };
+
+ uart2_ick: uart2_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <22>;
+ reg = <0x0210>;
+ };
+
+ uart2_fck: uart2_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_48m_ck>;
+ ti,bit-shift = <22>;
+ reg = <0x0200>;
+ };
+
+ uart3_ick: uart3_ick@214 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x0214>;
+ };
+
+ uart3_fck: uart3_fck@204 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_48m_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x0204>;
+ };
+
+ gpios_ick: gpios_ick@410 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x0410>;
+ };
+
+ gpios_fck: gpios_fck@400 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x0400>;
+ };
+
+ mpu_wdt_ick: mpu_wdt_ick@410 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <3>;
+ reg = <0x0410>;
+ };
+
+ mpu_wdt_fck: mpu_wdt_fck@400 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <3>;
+ reg = <0x0400>;
+ };
+
+ sync_32k_ick: sync_32k_ick@410 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0410>;
+ };
+
+ wdt1_ick: wdt1_ick@410 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <4>;
+ reg = <0x0410>;
+ };
+
+ omapctrl_ick: omapctrl_ick@410 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <5>;
+ reg = <0x0410>;
+ };
+
+ cam_fck: cam_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&func_96m_ck>;
+ ti,bit-shift = <31>;
+ reg = <0x0200>;
+ };
+
+ cam_ick: cam_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-no-wait-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <31>;
+ reg = <0x0210>;
+ };
+
+ mailboxes_ick: mailboxes_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <30>;
+ reg = <0x0210>;
+ };
+
+ wdt4_ick: wdt4_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <29>;
+ reg = <0x0210>;
+ };
+
+ wdt4_fck: wdt4_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_32k_ck>;
+ ti,bit-shift = <29>;
+ reg = <0x0200>;
+ };
+
+ mspro_ick: mspro_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <27>;
+ reg = <0x0210>;
+ };
+
+ mspro_fck: mspro_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_96m_ck>;
+ ti,bit-shift = <27>;
+ reg = <0x0200>;
+ };
+
+ fac_ick: fac_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <25>;
+ reg = <0x0210>;
+ };
+
+ fac_fck: fac_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_12m_ck>;
+ ti,bit-shift = <25>;
+ reg = <0x0200>;
+ };
+
+ hdq_ick: hdq_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <23>;
+ reg = <0x0210>;
+ };
+
+ hdq_fck: hdq_fck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_12m_ck>;
+ ti,bit-shift = <23>;
+ reg = <0x0200>;
+ };
+
+ i2c1_ick: i2c1_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <19>;
+ reg = <0x0210>;
+ };
+
+ i2c2_ick: i2c2_ick@210 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <20>;
+ reg = <0x0210>;
+ };
+
+ gpmc_fck: gpmc_fck@238 {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&core_l3_ck>;
+ ti,clock-div = <1>;
+ ti,autoidle-shift = <1>;
+ reg = <0x0238>;
+ ti,clock-mult = <1>;
+ };
+
+ sdma_fck: sdma_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&core_l3_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ sdma_ick: sdma_ick@238 {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&core_l3_ck>;
+ ti,clock-div = <1>;
+ ti,autoidle-shift = <0>;
+ reg = <0x0238>;
+ ti,clock-mult = <1>;
+ };
+
+ sdrc_ick: sdrc_ick@238 {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&core_l3_ck>;
+ ti,clock-div = <1>;
+ ti,autoidle-shift = <2>;
+ reg = <0x0238>;
+ ti,clock-mult = <1>;
+ };
+
+ des_ick: des_ick@21c {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <0>;
+ reg = <0x021c>;
+ };
+
+ sha_ick: sha_ick@21c {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x021c>;
+ };
+
+ rng_ick: rng_ick@21c {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x021c>;
+ };
+
+ aes_ick: aes_ick@21c {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <3>;
+ reg = <0x021c>;
+ };
+
+ pka_ick: pka_ick@21c {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&l4_ck>;
+ ti,bit-shift = <4>;
+ reg = <0x021c>;
+ };
+
+ usb_fck: usb_fck@204 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&func_48m_ck>;
+ ti,bit-shift = <0>;
+ reg = <0x0204>;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-beagle-ab4.dts b/src/arm/ti/omap/omap3-beagle-ab4.dts
new file mode 100644
index 0000000..990ff2d
--- /dev/null
+++ b/src/arm/ti/omap/omap3-beagle-ab4.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "omap3-beagle.dts"
+
+/ {
+ model = "TI OMAP3 BeagleBoard A to B4";
+ compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
+};
+
+/*
+ * Workaround for capacitor C70 issue, see "Boards revision A and < B5"
+ * section at https://elinux.org/BeagleBoard_Community
+ */
+
+/* Unusable as clocksource because of unreliable oscillator */
+&counter32k {
+ status = "disabled";
+};
+
+/* Unusable as clockevent because of unreliable oscillator, allow to idle */
+&timer1_target {
+ /delete-property/ti,no-reset-on-init;
+ /delete-property/ti,no-idle;
+ timer@0 {
+ /delete-property/ti,timer-alwon;
+ };
+};
+
+/* Preferred always-on timer for clocksource */
+&timer12_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ /* Always clocked by secure_32k_fck */
+ };
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&gpt2_fck>;
+ assigned-clock-parents = <&sys_ck>;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-beagle-xm-ab.dts b/src/arm/ti/omap/omap3-beagle-xm-ab.dts
new file mode 100644
index 0000000..cb6968a
--- /dev/null
+++ b/src/arm/ti/omap/omap3-beagle-xm-ab.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "omap3-beagle-xm.dts"
+
+/ {
+ /* HS USB Port 2 Power enable was inverted with the xM C */
+ hsusb2_power: hsusb2_power_reg {
+ enable-active-high;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-beagle-xm.dts b/src/arm/ti/omap/omap3-beagle-xm.dts
new file mode 100644
index 0000000..08ee0f8
--- /dev/null
+++ b/src/arm/ti/omap/omap3-beagle-xm.dts
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+
+/ {
+ model = "TI OMAP3 BeagleBoard xM";
+ compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap3";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ aliases {
+ display0 = &dvi0;
+ display1 = &tv0;
+ ethernet = ðernet;
+ };
+
+ /* fixed 26MHz oscillator */
+ hfclk_26m: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+
+ led-controller-1 {
+ compatible = "gpio-leds";
+
+ led-1 {
+ label = "beagleboard::usr0";
+ gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-2 {
+ label = "beagleboard::usr1";
+ gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ led-controller-2 {
+ compatible = "pwm-leds";
+
+ led-3 {
+ label = "beagleboard::pmu_stat";
+ pwms = <&twl_pwmled 1 7812500>;
+ max-brightness = <127>;
+ };
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "omap3beagle";
+
+ ti,mcbsp = <&mcbsp2>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ user {
+ label = "user";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x114>;
+ wakeup-source;
+ };
+
+ };
+
+ /* HS USB Port 2 Power */
+ hsusb2_power: hsusb2_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
+ startup-delay-us = <70000>;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2-phy-pins {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
+ vcc-supply = <&hsusb2_power>;
+ #phy-cells = <0>;
+ };
+
+ tfp410: encoder0 {
+ compatible = "ti,tfp410";
+ powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+
+ /* XXX pinctrl from twl */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ digital;
+
+ ddc-i2c-bus = <&i2c3>;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
+ tv0: connector1 {
+ compatible = "svideo-connector";
+ label = "tv";
+
+ port {
+ tv_connector_in: endpoint {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+ };
+
+ etb@5401b000 {
+ compatible = "arm,coresight-etb10", "arm,primecell";
+ reg = <0x5401b000 0x1000>;
+
+ clocks = <&emu_src_ck>;
+ clock-names = "apb_pclk";
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
+ };
+ };
+ };
+
+ etm@54010000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x54010000 0x1000>;
+
+ clocks = <&emu_src_ck>;
+ clock-names = "apb_pclk";
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
+ };
+ };
+ };
+};
+
+&omap3_pmx_wkup {
+ gpio1_pins: gpio1-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
+ >;
+ };
+
+ dss_dpi_pins2: dss-dpi1-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
+ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
+ OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
+ OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
+ OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
+ >;
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_pins
+ >;
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+ >;
+ };
+
+ hsusb2_pins: hsusb2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
+ OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
+ >;
+ };
+
+ dss_dpi_pins1: dss-dpi2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_2_pins
+ >;
+
+ hsusb2_2_pins: hsusb2-2-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ clocks = <&hfclk_26m>;
+ clock-names = "fck";
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+
+ twl_power: power {
+ compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
+ ti,use_poweroff;
+ };
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ vqmmc-supply = <&vsim>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&twl_gpio {
+ ti,use-leds;
+ /* pullups: BIT(1) */
+ ti,pullups = <0x000002>;
+ /*
+ * pulldowns:
+ * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <0x03a1c4>;
+};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
+
+&uart3 {
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_pins>;
+};
+
+&usbhshost {
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub@2 {
+ compatible = "usb424,9514";
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet: ethernet@1 {
+ compatible = "usb424,ec00";
+ reg = <1>;
+ };
+ };
+};
+
+&vaux2 {
+ regulator-name = "usb_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
+
+&mcbsp2 {
+ status = "okay";
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_dpi_pins1
+ &dss_dpi_pins2
+ >;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&venc {
+ status = "okay";
+
+ vdda-supply = <&vdac>;
+
+ port {
+ venc_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ ti,channels = <2>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap3-beagle.dts b/src/arm/ti/omap/omap3-beagle.dts
new file mode 100644
index 0000000..4d9a8ea
--- /dev/null
+++ b/src/arm/ti/omap/omap3-beagle.dts
@@ -0,0 +1,436 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+
+/ {
+ model = "TI OMAP3 BeagleBoard";
+ compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ aliases {
+ display0 = &dvi0;
+ display1 = &tv0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-pmu-stat {
+ label = "beagleboard::pmu_stat";
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+ };
+
+ led-heartbeat {
+ label = "beagleboard::usr0";
+ gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-mmc {
+ label = "beagleboard::usr1";
+ gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ /* HS USB Port 2 Power */
+ hsusb2_power: hsusb2_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
+ startup-delay-us = <70000>;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2-phy-pins {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
+ vcc-supply = <&hsusb2_power>;
+ #phy-cells = <0>;
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "omap3beagle";
+
+ ti,mcbsp = <&mcbsp2>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ user {
+ label = "user";
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x114>;
+ wakeup-source;
+ };
+
+ };
+
+ tfp410: encoder0 {
+ compatible = "ti,tfp410";
+ powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tfp410_pins>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ digital;
+
+ ddc-i2c-bus = <&i2c3>;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
+ tv0: connector1 {
+ compatible = "svideo-connector";
+ label = "tv";
+
+ port {
+ tv_connector_in: endpoint {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+ };
+
+ etb@540000000 {
+ compatible = "arm,coresight-etb10", "arm,primecell";
+ reg = <0x5401b000 0x1000>;
+
+ clocks = <&emu_src_ck>;
+ clock-names = "apb_pclk";
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
+ };
+ };
+ };
+
+ etm@54010000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x54010000 0x1000>;
+
+ clocks = <&emu_src_ck>;
+ clock-names = "apb_pclk";
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
+ };
+ };
+ };
+};
+
+&omap3_pmx_wkup {
+ gpio1_pins: gpio1-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
+ >;
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_pins
+ >;
+
+ hsusb2_pins: hsusb2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
+ OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ tfp410_pins: tfp410-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
+ >;
+ };
+
+ dss_dpi_pins: dss-dpi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_2_pins
+ >;
+
+ hsusb2_2_pins: hsusb2-2-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c3 {
+ clock-frequency = <100000>;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ vqmmc-supply = <&vsim>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&usbhshost {
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy>;
+};
+
+&twl_gpio {
+ ti,use-leds;
+ /* pullups: BIT(1) */
+ ti,pullups = <0x000002>;
+ /*
+ * pulldowns:
+ * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <0x03a1c4>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_pins>;
+};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
+
+&vaux2 {
+ regulator-name = "vdd_ehci";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
+
+&mcbsp2 {
+ status = "okay";
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+ regulator-always-on;
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&venc {
+ status = "okay";
+
+ vdda-supply = <&vdac>;
+
+ port {
+ venc_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ ti,channels = <2>;
+ };
+ };
+};
+
+&gpmc {
+ status = "okay";
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0 space, 16MB */
+
+ /* Chip select 0 */
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* NAND I/O window, 4 bytes */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ ti,nand-ecc-opt = "ham1";
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ nand-bus-width = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gpmc,device-width = <2>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <36>;
+ gpmc,cs-wr-off-ns = <36>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <24>;
+ gpmc,adv-wr-off-ns = <36>;
+ gpmc,oe-on-ns = <6>;
+ gpmc,oe-off-ns = <48>;
+ gpmc,we-on-ns = <6>;
+ gpmc,we-off-ns = <30>;
+ gpmc,rd-cycle-ns = <72>;
+ gpmc,wr-cycle-ns = <72>;
+ gpmc,access-ns = <54>;
+ gpmc,wr-access-ns = <30>;
+
+ partition@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+ partition@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1e0000>;
+ };
+ partition@1c0000 {
+ label = "U-Boot Env";
+ reg = <0x260000 0x20000>;
+ };
+ partition@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x400000>;
+ };
+ partition@780000 {
+ label = "Filesystem";
+ reg = <0x680000 0xf980000>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap3-cm-t3517.dts b/src/arm/ti/omap/omap3-cm-t3517.dts
new file mode 100644
index 0000000..f776e05
--- /dev/null
+++ b/src/arm/ti/omap/omap3-cm-t3517.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for CompuLab CM-T3517
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+#include "omap3-cm-t3x.dtsi"
+
+/ {
+ model = "CompuLab CM-T3517";
+ compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+
+ vmmc: regulator-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ wl12xx_vmmc2: wl12xx_vmmc2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vw1271";
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &wl12xx_wkup_pins
+ &wl12xx_core_pins
+ >;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 6 GPIO_ACTIVE_HIGH >; /* gpio6 */
+ startup-delay-us = <20000>;
+ enable-active-high;
+ };
+
+ wl12xx_vaux2: wl12xx_vaux2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271_vaux2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+&omap3_pmx_wkup {
+
+ wl12xx_wkup_pins: wl12xx-wkup-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */
+ OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE4) /* sys_boot4.gpio_6 */
+ >;
+ };
+};
+
+&omap3_pmx_core {
+
+ phy1_reset_pins: hsusb1-phy-reset-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE4) /* uart2_tx.gpio_146 */
+ >;
+ };
+
+ phy2_reset_pins: hsusb2-phy-reset-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x217a, PIN_OUTPUT | MUX_MODE4) /* uart2_rx.gpio_147 */
+ >;
+ };
+
+ otg_drv_vbus: otg-drv-vbus-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50MHz_clk.usb0_drvvbus */
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ >;
+ };
+
+ wl12xx_core_pins: wl12xx-core-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs5.gpio_56 */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_rts.gpio_145 */
+ >;
+ };
+
+ usb_hub_pins: usb-hub-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2184, PIN_OUTPUT | MUX_MODE4) /* mcbsp4_clkx.gpio_152 - USB HUB RST */
+ >;
+ };
+};
+
+&hsusb1_phy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&phy1_reset_pins>;
+ reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
+};
+
+&hsusb2_phy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&phy2_reset_pins>;
+ reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;
+};
+
+&davinci_emac {
+ status = "okay";
+};
+
+&davinci_mdio {
+ status = "okay";
+};
+
+&am35x_otg_hs {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_drv_vbus>;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc>;
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&wl12xx_vmmc2>;
+ vqmmc-supply = <&wl12xx_vaux2>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 145 */
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_dpi_pins_common
+ &dss_dpi_pins_cm_t35x
+ >;
+};
+
diff --git a/src/arm/ti/omap/omap3-cm-t3530.dts b/src/arm/ti/omap/omap3-cm-t3530.dts
new file mode 100644
index 0000000..0c6f149
--- /dev/null
+++ b/src/arm/ti/omap/omap3-cm-t3530.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for CompuLab CM-T3530
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-cm-t3x30.dtsi"
+
+/ {
+ model = "CompuLab CM-T3530";
+ compatible = "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
+
+ /* Regulator to trigger the reset signal of the Wifi module */
+ mmc2_sdio_reset: regulator-mmc2-sdio-reset {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-mmc2-sdio-reset";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&omap3_pmx_core {
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dir_dat0 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dir_dat1 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dir_cmd */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */
+ >;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&mmc2_sdio_reset>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_dpi_pins_common
+ &dss_dpi_pins_cm_t35x
+ >;
+};
+
diff --git a/src/arm/ti/omap/omap3-cm-t3730.dts b/src/arm/ti/omap/omap3-cm-t3730.dts
new file mode 100644
index 0000000..f1a8f0f
--- /dev/null
+++ b/src/arm/ti/omap/omap3-cm-t3730.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for CompuLab CM-T3730
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-cm-t3x30.dtsi"
+
+/ {
+ model = "CompuLab CM-T3730";
+ compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3";
+
+ wl12xx_vmmc2: wl12xx_vmmc2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vw1271";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_gpio>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; /* gpio73 */
+ startup-delay-us = <20000>;
+ enable-active-high;
+ };
+
+ wl12xx_vaux2: wl12xx_vaux2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271_vaux2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vaux2>;
+ };
+};
+
+&omap3_pmx_wkup {
+ dss_dpi_pins_cm_t3730: dss-dpi-cm-t3730-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
+ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
+ OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
+ OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
+ OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
+ >;
+ };
+};
+
+&omap3_pmx_core {
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ >;
+ };
+
+ wl12xx_gpio: wl12xx-gpio-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* dss_data3.gpio_73 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 */
+ >;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&wl12xx_vmmc2>;
+ vqmmc-supply = <&wl12xx_vaux2>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_dpi_pins_common
+ &dss_dpi_pins_cm_t3730
+ >;
+};
+
diff --git a/src/arm/ti/omap/omap3-cm-t3x.dtsi b/src/arm/ti/omap/omap3-cm-t3x.dtsi
new file mode 100644
index 0000000..950a29f
--- /dev/null
+++ b/src/arm/ti/omap/omap3-cm-t3x.dtsi
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common support for CompuLab CM-T3x CoMs
+ */
+
+/ {
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&green_led_pins>;
+ ledb {
+ label = "cm-t3x:green";
+ gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* gpio186 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ /* HS USB Port 1 Power */
+ hsusb1_power: hsusb1_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <70000>;
+ };
+
+ /* HS USB Port 2 Power */
+ hsusb2_power: hsusb2_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <70000>;
+ };
+
+ /* HS USB Host PHY on PORT 1 */
+ hsusb1_phy: hsusb1_phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&hsusb1_power>;
+ #phy-cells = <0>;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2-phy-pins {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&hsusb2_power>;
+ #phy-cells = <0>;
+ };
+
+ ads7846reg: ads7846-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "ads7846-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ tv0: svideo-connector {
+ compatible = "svideo-connector";
+ label = "tv";
+
+ port {
+ tv_connector_in: endpoint {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+ };
+};
+
+&omap3_pmx_core {
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ green_led_pins: green-led-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4) /* sys_clkout2.gpio_186 */
+ >;
+ };
+
+ dss_dpi_pins_common: dss-dpi-common-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ dss_dpi_pins_cm_t35x: dss-dpi-cm-t35x-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ >;
+ };
+
+ ads7846_pins: ads7846-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20ba, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
+ >;
+ };
+
+ mcspi1_pins: mcspi1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk */
+ OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo */
+ OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi */
+ OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0 */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ mcbsp2_pins: mcbsp2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */
+ >;
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ bus-width = <4>;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <400000>;
+
+ at24@50 {
+ compatible = "atmel,24c02";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+};
+
+&usbhshost {
+ port1-mode = "ehci-phy";
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy &hsusb2_phy>;
+};
+
+&mcspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi1_pins>;
+
+ /* touch controller */
+ ads7846@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ads7846_pins>;
+
+ compatible = "ti,ads7846";
+ vcc-supply = <&ads7846reg>;
+
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <1500000>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <25 0>; /* gpio_57 */
+ pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+ ti,x-min = /bits/ 16 <0x0>;
+ ti,x-max = /bits/ 16 <0x0fff>;
+ ti,y-min = /bits/ 16 <0x0>;
+ ti,y-max = /bits/ 16 <0x0fff>;
+
+ ti,x-plate-ohms = /bits/ 16 <180>;
+ ti,pressure-max = /bits/ 16 <255>;
+
+ ti,debounce-max = /bits/ 16 <30>;
+ ti,debounce-tol = /bits/ 16 <10>;
+ ti,debounce-rep = /bits/ 16 <1>;
+
+ wakeup-source;
+ };
+};
+
+&venc {
+ status = "okay";
+
+ port {
+ venc_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ ti,channels = <2>;
+ };
+ };
+};
+
+&mcbsp2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ ti,nand-ecc-opt = "sw";
+
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <120>;
+ gpmc,cs-wr-off-ns = <120>;
+
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <120>;
+ gpmc,adv-wr-off-ns = <120>;
+
+ gpmc,we-on-ns = <6>;
+ gpmc,we-off-ns = <90>;
+
+ gpmc,oe-on-ns = <6>;
+ gpmc,oe-off-ns = <90>;
+
+ gpmc,page-burst-access-ns = <6>;
+ gpmc,access-ns = <72>;
+ gpmc,cycle2cycle-delay-ns = <60>;
+
+ gpmc,rd-cycle-ns = <120>;
+ gpmc,wr-cycle-ns = <120>;
+ gpmc,wr-access-ns = <186>;
+ gpmc,wr-data-mux-bus-ns = <90>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "xloader";
+ reg = <0 0x80000>;
+ };
+ partition@80000 {
+ label = "uboot";
+ reg = <0x80000 0x1e0000>;
+ };
+ partition@260000 {
+ label = "uboot environment";
+ reg = <0x260000 0x40000>;
+ };
+ partition@2a0000 {
+ label = "linux";
+ reg = <0x2a0000 0x400000>;
+ };
+ partition@6a0000 {
+ label = "rootfs";
+ reg = <0x6a0000 0x1f880000>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap3-cm-t3x30.dtsi b/src/arm/ti/omap/omap3-cm-t3x30.dtsi
new file mode 100644
index 0000000..0e94251
--- /dev/null
+++ b/src/arm/ti/omap/omap3-cm-t3x30.dtsi
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common support for CompuLab CM-T3x30 CoMs
+ */
+
+#include "omap3-cm-t3x.dtsi"
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "cm-t35";
+
+ ti,mcbsp = <&mcbsp2>;
+ };
+};
+
+&omap3_pmx_core {
+
+ smsc1_pins: smsc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */
+ OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
+ >;
+ };
+
+ hsusb0_pins: hsusb0-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
+ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
+ OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
+ OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
+ OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */
+ OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
+ OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
+ OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */
+ OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */
+ OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */
+ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */
+ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
+ >;
+ };
+};
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+ ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
+ <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
+
+ smsc1: ethernet@gpmc {
+ compatible = "smsc,lan9221", "smsc,lan9115";
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc1_pins>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ reg = <5 0 0xff>;
+ };
+};
+
+&i2c1 {
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+#include <dt-bindings/input/input.h>
+
+&venc {
+ vdda-supply = <&vdac>;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+};
+
+&twl_gpio {
+ ti,use-leds;
+ /* pullups: BIT(0) */
+ ti,pullups = <0x000001>;
+};
+
+&twl_keypad {
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x01, KEY_A)
+ MATRIX_KEY(0x00, 0x02, KEY_B)
+ MATRIX_KEY(0x00, 0x03, KEY_LEFT)
+
+ MATRIX_KEY(0x01, 0x01, KEY_UP)
+ MATRIX_KEY(0x01, 0x02, KEY_ENTER)
+ MATRIX_KEY(0x01, 0x03, KEY_DOWN)
+
+ MATRIX_KEY(0x02, 0x01, KEY_RIGHT)
+ MATRIX_KEY(0x02, 0x02, KEY_C)
+ MATRIX_KEY(0x02, 0x03, KEY_D)
+ >;
+};
+
+&hsusb1_phy {
+ reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
+};
+
+&hsusb2_phy {
+ reset-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
+};
+
+&usb_otg_hs {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb0_pins>;
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
diff --git a/src/arm/ti/omap/omap3-cpu-thermal.dtsi b/src/arm/ti/omap/omap3-cpu-thermal.dtsi
new file mode 100644
index 0000000..7dd2340
--- /dev/null
+++ b/src/arm/ti/omap/omap3-cpu-thermal.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP3 SoC CPU thermal
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+cpu_thermal: cpu-thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+ coefficients = <0 20000>;
+
+ thermal-sensors = <&bandgap>;
+
+ cpu_trips: trips {
+ cpu_alert0: cpu_alert {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_crit: cpu_crit {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cpu_cooling_maps: cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&cpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap3-devkit8000-common.dtsi b/src/arm/ti/omap/omap3-devkit8000-common.dtsi
new file mode 100644
index 0000000..07d5894
--- /dev/null
+++ b/src/arm/ti/omap/omap3-devkit8000-common.dtsi
@@ -0,0 +1,392 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Author: Anil Kumar <anilk4.v@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+
+#include "omap34xx.dtsi"
+/ {
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-heartbeat {
+ label = "devkit8000::led1";
+ gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-mmc {
+ label = "devkit8000::led2";
+ gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */
+ default-state = "on";
+ linux,default-trigger = "none";
+ };
+
+ led-usr {
+ label = "devkit8000::led3";
+ gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */
+ default-state = "on";
+ linux,default-trigger = "usr";
+ };
+
+ led-pmu-stat {
+ label = "devkit8000::pmu_stat";
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+ };
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "devkit8000";
+
+ ti,mcbsp = <&mcbsp2>;
+ ti,audio-routing =
+ "Ext Spk", "PREDRIVEL",
+ "Ext Spk", "PREDRIVER",
+ "MAINMIC", "Main Mic",
+ "Main Mic", "Mic Bias 1";
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ user {
+ label = "user";
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ linux,code = <BTN_EXTRA>;
+ wakeup-source;
+ };
+ };
+
+ tfp410: encoder0 {
+ compatible = "ti,tfp410";
+ powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint {
+ remote-endpoint = <&dpi_dvi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ digital;
+
+ ddc-i2c-bus = <&i2c2>;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
+ tv0: connector1 {
+ compatible = "svideo-connector";
+ label = "tv";
+
+ port {
+ tv_connector_in: endpoint {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ status = "disabled";
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ vqmmc-supply = <&vsim>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+/* Unusable as clockevent because if unreliable oscillator, allow to idle */
+&timer1_target {
+ /delete-property/ti,no-reset-on-init;
+ /delete-property/ti,no-idle;
+ timer@0 {
+ /delete-property/ti,timer-alwon;
+ };
+};
+
+/* Preferred timer for clockevent */
+&timer12_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ /* Always clocked by secure_32k_fck */
+ };
+};
+
+&twl_gpio {
+ ti,use-leds;
+ /*
+ * pulldowns:
+ * BIT(1), BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <0x03a1c6>;
+};
+
+&twl_keypad {
+ linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
+ MATRIX_KEY(1, 0, KEY_2)
+ MATRIX_KEY(2, 0, KEY_3)
+ MATRIX_KEY(0, 1, KEY_4)
+ MATRIX_KEY(1, 1, KEY_5)
+ MATRIX_KEY(2, 1, KEY_6)
+ MATRIX_KEY(3, 1, KEY_F5)
+ MATRIX_KEY(0, 2, KEY_7)
+ MATRIX_KEY(1, 2, KEY_8)
+ MATRIX_KEY(2, 2, KEY_9)
+ MATRIX_KEY(3, 2, KEY_F6)
+ MATRIX_KEY(0, 3, KEY_F7)
+ MATRIX_KEY(1, 3, KEY_0)
+ MATRIX_KEY(2, 3, KEY_F8)
+ MATRIX_KEY(4, 5, KEY_RESERVED)
+ MATRIX_KEY(4, 4, KEY_VOLUMEUP)
+ MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)
+ >;
+};
+
+&wdt2 {
+ status = "disabled";
+};
+
+&mcbsp2 {
+ status = "okay";
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
+ 6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ ti,nand-ecc-opt = "sw";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ x-loader@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+
+ bootloaders@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1e0000>;
+ };
+
+ bootloaders_env@260000 {
+ label = "U-Boot Env";
+ reg = <0x260000 0x20000>;
+ };
+
+ kernel@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x400000>;
+ };
+
+ filesystem@680000 {
+ label = "File System";
+ reg = <0x680000 0xf980000>;
+ };
+ };
+
+ ethernet@6,0 {
+ compatible = "davicom,dm9000";
+ reg = <6 0x000 2>,
+ <6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
+ bank-width = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+ davicom,no-eeprom;
+
+ gpmc,mux-add-data = <0>;
+ gpmc,device-width = <1>;
+ gpmc,wait-pin = <0>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+
+ gpmc,cs-on-ns = <6>;
+ gpmc,cs-rd-off-ns = <180>;
+ gpmc,cs-wr-off-ns = <180>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <18>;
+ gpmc,adv-wr-off-ns = <48>;
+ gpmc,oe-on-ns = <54>;
+ gpmc,oe-off-ns = <168>;
+ gpmc,we-on-ns = <54>;
+ gpmc,we-off-ns = <168>;
+ gpmc,rd-cycle-ns = <186>;
+ gpmc,wr-cycle-ns = <186>;
+ gpmc,access-ns = <144>;
+ gpmc,page-burst-access-ns = <24>;
+ gpmc,bus-turnaround-ns = <90>;
+ gpmc,cycle2cycle-delay-ns = <90>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,wr-access-ns = <0>;
+ };
+};
+
+&omap3_pmx_core {
+ dss_dpi_pins: dss-dpi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+};
+
+&vpll1 {
+ /* Needed for DSS */
+ regulator-name = "vdds_dsi";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ vdds_dsi-supply = <&vpll1>;
+ vdda_dac-supply = <&vdac>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dpi_dvi_out: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+
+ endpoint@1 {
+ reg = <1>;
+ };
+ };
+};
+
+&venc {
+ status = "okay";
+
+ vdda-supply = <&vdac>;
+
+ port {
+ venc_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ ti,channels = <2>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap3-devkit8000-lcd-common.dtsi b/src/arm/ti/omap/omap3-devkit8000-lcd-common.dtsi
new file mode 100644
index 0000000..a7f99ae
--- /dev/null
+++ b/src/arm/ti/omap/omap3-devkit8000-lcd-common.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
+ */
+
+#include "omap3-devkit8000-common.dtsi"
+/ {
+ aliases {
+ display0 = &lcd0;
+ display1 = &dvi0;
+ display2 = &tv0;
+ };
+
+ lcd0: display {
+ compatible = "panel-dpi";
+ label = "lcd";
+
+ enable-gpios = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_lcd_out>;
+ };
+ };
+ };
+};
+
+&dss {
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dpi_lcd_out: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&vio {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&mcspi2 {
+
+ /* touch controller */
+ ads7846@0 {
+ compatible = "ti,ads7846";
+ vcc-supply = <&vio>;
+
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <1500000>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <27 0>; /* gpio_27 */
+ pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+
+ ti,x-min = /bits/ 16 <0x0>;
+ ti,x-max = /bits/ 16 <0x0fff>;
+ ti,y-min = /bits/ 16 <0x0>;
+ ti,y-max = /bits/ 16 <0x0fff>;
+ ti,x-plate-ohms = /bits/ 16 <180>;
+ ti,pressure-max = /bits/ 16 <255>;
+ ti,debounce-max = /bits/ 16 <10>;
+ ti,debounce-tol = /bits/ 16 <5>;
+ ti,debounce-rep = /bits/ 16 <1>;
+ ti,keep-vref-on = <1>;
+ ti,settle-delay-usec = /bits/ 16 <150>;
+
+ wakeup-source;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-devkit8000-lcd43.dts b/src/arm/ti/omap/omap3-devkit8000-lcd43.dts
new file mode 100644
index 0000000..afed850
--- /dev/null
+++ b/src/arm/ti/omap/omap3-devkit8000-lcd43.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
+ */
+/dts-v1/;
+
+/*
+ * 4.3'' LCD panel sold with devkit8000 board
+ */
+
+#include "omap3-devkit8000-lcd-common.dtsi"
+/ {
+ model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel";
+ compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3";
+
+ lcd0: display {
+ panel-timing {
+ clock-frequency = <10164705>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <2>;
+ hback-porch = <2>;
+ hsync-len = <41>;
+ vback-porch = <2>;
+ vfront-porch = <2>;
+ vsync-len = <10>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap3-devkit8000-lcd70.dts b/src/arm/ti/omap/omap3-devkit8000-lcd70.dts
new file mode 100644
index 0000000..07c51a1
--- /dev/null
+++ b/src/arm/ti/omap/omap3-devkit8000-lcd70.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
+ */
+/dts-v1/;
+
+/*
+ * 7.0'' LCD panel sold with some devkit8000 board
+ */
+
+#include "omap3-devkit8000-lcd-common.dtsi"
+/ {
+ model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel";
+ compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3";
+
+ lcd0: display {
+ panel-timing {
+ clock-frequency = <40000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <1>;
+ hback-porch = <1>;
+ hsync-len = <48>;
+ vback-porch = <25>;
+ vfront-porch = <12>;
+ vsync-len = <3>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap3-devkit8000.dts b/src/arm/ti/omap/omap3-devkit8000.dts
new file mode 100644
index 0000000..162d072
--- /dev/null
+++ b/src/arm/ti/omap/omap3-devkit8000.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
+ */
+/dts-v1/;
+
+#include "omap3-devkit8000-common.dtsi"
+/ {
+ model = "TimLL OMAP3 Devkit8000";
+ compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3";
+
+ aliases {
+ display1 = &dvi0;
+ display2 = &tv0;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-echo.dts b/src/arm/ti/omap/omap3-echo.dts
new file mode 100644
index 0000000..96011c9
--- /dev/null
+++ b/src/arm/ti/omap/omap3-echo.dts
@@ -0,0 +1,724 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 André Hentschel <nerv@dawncrow.de>
+ */
+/dts-v1/;
+
+#include "dm3725.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Amazon Echo (first generation)";
+ compatible = "amazon,omap3-echo", "ti,omap3630", "ti,omap3";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0xc600000>; /* 198 MB */
+ };
+
+ vcc5v: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc3v3: fixedregulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc1v8: fixedregulator2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <40>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+
+ mute-button {
+ label = "mute";
+ linux,code = <KEY_MUTE>;
+ gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; /* GPIO_70 */
+ wakeup-source;
+ };
+
+ help-button {
+ label = "help";
+ linux,code = <KEY_HELP>;
+ gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; /* GPIO_72 */
+ wakeup-source;
+ };
+ };
+
+ rotary: rotary-encoder {
+ compatible = "rotary-encoder";
+ gpios = <
+ &gpio3 5 GPIO_ACTIVE_HIGH /* GPIO_69 */
+ &gpio3 12 GPIO_ACTIVE_HIGH /* GPIO_76 */
+ >;
+ linux,axis = <REL_X>;
+ rotary-encoder,relative-axis;
+ };
+
+ speaker_amp: speaker-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* gpio_129 */
+ sound-name-prefix = "Speaker Amp";
+ VCC-supply = <&vcc1v8>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Misto Speaker";
+ simple-audio-card,widgets =
+ "Speaker", "Speaker";
+ simple-audio-card,routing =
+ "Speaker Amp INL", "HPL",
+ "Speaker Amp INR", "HPR",
+ "Speaker", "Speaker Amp OUTL",
+ "Speaker", "Speaker Amp OUTR";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_master>;
+ simple-audio-card,frame-master = <&sound_master>;
+ simple-audio-card,aux-devs = <&speaker_amp>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcbsp2>;
+ };
+
+ sound_master: simple-audio-card,codec {
+ sound-dai = <&codec0>;
+ system-clock-frequency = <19200000>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+ };
+};
+
+&mcbsp2 {
+ status = "okay";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+
+ lp5523A: lp5523A@32 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "national,lp5523";
+ label = "q1";
+ reg = <0x32>;
+ clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+ enable-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
+
+ multi-led@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RGB>;
+
+ led@0 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x0>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@1 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@6 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x6>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+ multi-led@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_RGB>;
+
+ led@2 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@3 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x3>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@7 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x7>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ color = <LED_COLOR_ID_RGB>;
+
+ led@4 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x4>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@5 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x5>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@8 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x8>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+ };
+
+ lp5523B: lp5523B@33 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "national,lp5523";
+ label = "q3";
+ reg = <0x33>;
+ clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+ multi-led@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RGB>;
+
+ led@0 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x0>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@1 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@6 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x6>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+ multi-led@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_RGB>;
+
+ led@2 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@3 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x3>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@7 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x7>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ color = <LED_COLOR_ID_RGB>;
+
+ led@4 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x4>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@5 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x5>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@8 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x8>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+ };
+
+ lp5523C: lp5523C@34 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "national,lp5523";
+ label = "q4";
+ reg = <0x34>;
+ clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+ multi-led@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RGB>;
+
+ led@0 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x0>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@1 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@6 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x6>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+ multi-led@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_RGB>;
+
+ led@2 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@3 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x3>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@7 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x7>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ color = <LED_COLOR_ID_RGB>;
+
+ led@4 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x4>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@5 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x5>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@8 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x8>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+ };
+
+ lp5523D: lp552D@35 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "national,lp5523";
+ label = "q2";
+ reg = <0x35>;
+ clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+ multi-led@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RGB>;
+
+ led@0 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x0>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@1 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@6 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x6>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+ multi-led@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_RGB>;
+
+ led@2 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@3 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x3>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@7 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x7>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ color = <LED_COLOR_ID_RGB>;
+
+ led@4 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x4>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@5 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x5>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@8 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ reg = <0x8>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ codec0: codec@18 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic32x4";
+ reg = <0x18>;
+ clocks = <&sys_clkout1>;
+ clock-names = "mclk";
+ ldoin-supply = <&vcc1v8>;
+ iov-supply = <&vcc1v8>;
+ reset-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; /* gpio_74 */
+ };
+};
+
+
+#include "../../tps65910.dtsi"
+
+&omap3_pmx_core {
+ tps_pins: tps-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_INPUT_PULLUP | PIN_OFF_OUTPUT_LOW | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+ >;
+ };
+
+ button_pins: button-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4) /* dss_data0.gpio_70 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* dss_data2.gpio_72 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* dss_data4.gpio_74 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* dss_data15.gpio_85 */
+ OMAP3_CORE1_IOPAD(0x2a1a, PIN_OUTPUT | MUX_MODE0) /* sys_clkout1.sys_clkout1 */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4.sdmmc2_dat4 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5.sdmmc2_dat5 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6.sdmmc2_dat6 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */
+ >;
+ };
+
+ mcbsp2_pins: mcbsp2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ mmc3_pins: mmc3-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
+ OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
+ OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
+ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
+ OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+ OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
+ >;
+ };
+};
+
+&mmc1 {
+ status = "okay";
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc_reg>;
+};
+
+&mmc2 {
+ status = "okay";
+ bus-width = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vmmc_reg>;
+};
+
+&mmc3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+ non-removable;
+ disable-wp;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ vmmc-supply = <&vcc3v3>;
+ vqmmc-supply = <&vcc1v8>;
+ atheros@0 {
+ compatible = "atheros,ath6kl";
+ reg = <0>;
+ bus-width = <4>;
+ };
+};
+
+&tps {
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps_pins>;
+
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ ti,en-ck32k-xtal;
+ ti,system-power-controller;
+
+ vcc1-supply = <&vcc5v>;
+ vcc2-supply = <&vcc5v>;
+ vcc3-supply = <&vcc5v>;
+ vcc4-supply = <&vcc5v>;
+ vcc5-supply = <&vcc5v>;
+ vcc6-supply = <&vcc5v>;
+ vcc7-supply = <&vcc5v>;
+ vccio-supply = <&vcc5v>;
+
+ regulators {
+
+ vio_reg: regulator@1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ regulator-name = "vdd_dsp";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap3-evm-37xx.dts b/src/arm/ti/omap/omap3-evm-37xx.dts
new file mode 100644
index 0000000..e0346bf
--- /dev/null
+++ b/src/arm/ti/omap/omap3-evm-37xx.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-evm-common.dtsi"
+#include "omap3-evm-processor-common.dtsi"
+
+/ {
+ model = "TI OMAP37XX EVM (TMDSEVM3730)";
+ compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb2_2_pins>;
+
+ ehci_phy_pins: ehci-phy-pins {
+ pinctrl-single,pins = <
+
+ /* EHCI PHY reset GPIO etk_d7.gpio_21 */
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)
+
+ /* EHCI VBUS etk_d8.gpio_22 */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)
+ >;
+ };
+
+ /* Used by OHCI and EHCI. OHCI won't work without external phy */
+ hsusb2_2_pins: hsusb2-2-pins {
+ pinctrl-single,pins = <
+
+ /* etk_d10.hsusb2_clk */
+ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
+
+ /* etk_d11.hsusb2_stp */
+ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
+
+ /* etk_d12.hsusb2_dir */
+ OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* etk_d13.hsusb2_nxt */
+ OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* etk_d14.hsusb2_data0 */
+ OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* etk_d15.hsusb2_data1 */
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)
+ >;
+ };
+};
+
+&gpmc {
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ linux,mtd-name = "hynix,h8kds0un0mer-4em";
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ ti,nand-ecc-opt = "bch8";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+ partition@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1c0000>;
+ };
+ partition@1c0000 {
+ label = "Environment";
+ reg = <0x240000 0x40000>;
+ };
+ partition@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x500000>;
+ };
+ partition@780000 {
+ label = "Filesystem";
+ reg = <0x780000 0x1f880000>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap3-evm-common.dtsi b/src/arm/ti/omap/omap3-evm-common.dtsi
new file mode 100644
index 0000000..1b6023c
--- /dev/null
+++ b/src/arm/ti/omap/omap3-evm-common.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common support for omap3 EVM boards
+ */
+
+#include <dt-bindings/input/input.h>
+#include "omap-gpmc-smsc911x.dtsi"
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ /* HS USB Port 2 Power */
+ hsusb2_power: hsusb2_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2-phy-pins {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
+ vcc-supply = <&hsusb2_power>;
+ #phy-cells = <0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ ledb {
+ label = "omap3evm::ledb";
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ wl12xx_vmmc: wl12xx_vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio150 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ vin-supply = <&vmmc2>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+#include "omap3-panel-sharp-ls037v7dw01.dtsi"
+
+&backlight0 {
+ gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
+};
+
+&twl {
+ twl_power: power {
+ compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
+ ti,use_poweroff;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ /*
+ * TVP5146 Video decoder-in for analog input support.
+ */
+ tvp5146@5c {
+ compatible = "ti,tvp5146m2";
+ reg = <0x5c>;
+ };
+};
+
+&lcd_3v3 {
+ gpio = <&gpio5 25 GPIO_ACTIVE_LOW>; /* gpio153 */
+};
+
+&lcd0 {
+ enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */
+ reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */
+ mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */
+ &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */
+ &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */
+};
+
+&mcspi1 {
+ tsc2046@0 {
+ interrupt-parent = <&gpio6>;
+ interrupts = <15 0>; /* gpio175 */
+ pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&mmc1 {
+ interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+ vmmc-supply = <&vmmc1>;
+ vqmmc-supply = <&vsim>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>;
+ vmmc-supply = <&wl12xx_vmmc>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ /* gpio_149 with uart1_rts pad as wakeirq */
+ interrupts-extended = <&gpio5 21 IRQ_TYPE_EDGE_RISING>,
+ <&omap3_pmx_core 0x14e>;
+ interrupt-names = "irq", "wakeup";
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&twl_gpio {
+ ti,use-leds;
+};
+
+&twl_keypad {
+ linux,keymap = <
+ MATRIX_KEY(2, 2, KEY_1)
+ MATRIX_KEY(1, 1, KEY_2)
+ MATRIX_KEY(0, 0, KEY_3)
+ MATRIX_KEY(3, 2, KEY_4)
+ MATRIX_KEY(2, 1, KEY_5)
+ MATRIX_KEY(1, 0, KEY_6)
+ MATRIX_KEY(1, 3, KEY_7)
+ MATRIX_KEY(3, 1, KEY_8)
+ MATRIX_KEY(2, 0, KEY_9)
+ MATRIX_KEY(2, 3, KEY_KPASTERISK)
+ MATRIX_KEY(0, 2, KEY_0)
+ MATRIX_KEY(3, 0, KEY_KPDOT)
+ /* s4 not wired */
+ MATRIX_KEY(1, 2, KEY_BACKSPACE)
+ MATRIX_KEY(0, 1, KEY_ENTER)
+ >;
+};
+
+&usbhshost {
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy>;
+};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
+
+&gpmc {
+ ethernet@gpmc {
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 8>;
+ reg = <5 0 0xff>;
+ };
+};
+
+&vaux2 {
+ regulator-name = "usb_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
diff --git a/src/arm/ti/omap/omap3-evm-processor-common.dtsi b/src/arm/ti/omap/omap3-evm-processor-common.dtsi
new file mode 100644
index 0000000..e278370
--- /dev/null
+++ b/src/arm/ti/omap/omap3-evm-processor-common.dtsi
@@ -0,0 +1,224 @@
+/*
+ * Common support for omap3 EVM 35xx/37xx processor modules
+ */
+
+/ {
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ wl12xx_vmmc: wl12xx_vmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_gpio>;
+ };
+};
+
+&dss {
+ vdds_dsi-supply = <&vpll2>;
+ vdda_video-supply = <&lcd_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_dpi_pins1
+ &dss_dpi_pins2
+ >;
+};
+
+&hsusb2_phy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ehci_phy_pins>;
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>;
+
+ dss_dpi_pins1: dss-dpi2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
+ OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
+ OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
+ OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
+ >;
+ };
+
+ /* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dir_dat0 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dir_dat1 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dir_cmd */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ /* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */
+ on_board_gpio_61: ehci-port-select-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4)
+ >;
+ };
+
+ /* Used by OHCI and EHCI. OHCI won't work without external phy */
+ hsusb2_pins: hsusb2-pins {
+ pinctrl-single,pins = <
+
+ /* mcspi1_cs3.hsusb2_data2 */
+ OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* mcspi2_clk.hsusb2_data7 */
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* mcspi2_simo.hsusb2_data4 */
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* mcspi2_somi.hsusb2_data5 */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* mcspi2_cs0.hsusb2_data6 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* mcspi2_cs1.hsusb2_data3 */
+ OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)
+ >;
+ };
+
+ /*
+ * Note that gpio_150 pulled high with internal pull to prevent wlcore
+ * reset on return from off mode in idle.
+ */
+ wl12xx_gpio: wl12xx-gpio-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_cts.gpio_150 */
+ OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */
+ >;
+ };
+
+ smsc911x_pins: smsc911x-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
+ >;
+ };
+};
+
+&omap3_pmx_wkup {
+ dss_dpi_pins2: dss-dpi1-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
+ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
+ OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
+ OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
+ OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
+ >;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&uart1 {
+ interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+&uart2 {
+ interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+};
+
+&uart3 {
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+/*
+ * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface
+ * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
+ */
+&gpio2 {
+ en-usb2-port-hog {
+ gpio-hog;
+ gpios = <29 GPIO_ACTIVE_HIGH>; /* gpio_61 */
+ output-low;
+ line-name = "enable usb2 port";
+ };
+};
+
+/* T2_GPIO_2 low to route GPIO_61 to on-board devices */
+&twl_gpio {
+ en_on_board_gpio_61 {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "en_hsusb2_clk";
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */
+ <5 0 0x2c000000 0x01000000>; /* CS5: 16MB for LAN9220 */
+
+ ethernet@gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc911x_pins>;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-evm.dts b/src/arm/ti/omap/omap3-evm.dts
new file mode 100644
index 0000000..a2a1613
--- /dev/null
+++ b/src/arm/ti/omap/omap3-evm.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-evm-common.dtsi"
+#include "omap3-evm-processor-common.dtsi"
+
+/ {
+ model = "TI OMAP35XX EVM (TMDSEVM3530)";
+ compatible = "ti,omap3-evm", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb2_2_pins>;
+
+ ehci_phy_pins: ehci-phy-pins {
+ pinctrl-single,pins = <
+
+ /* EHCI PHY reset GPIO etk_d7.gpio_21 */
+ OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)
+
+ /* EHCI VBUS etk_d8.gpio_22 */
+ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)
+ >;
+ };
+
+ /* Used by OHCI and EHCI. OHCI won't work without external phy */
+ hsusb2_2_pins: hsusb2-2-pins {
+ pinctrl-single,pins = <
+
+ /* etk_d10.hsusb2_clk */
+ OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
+
+ /* etk_d11.hsusb2_stp */
+ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
+
+ /* etk_d12.hsusb2_dir */
+ OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* etk_d13.hsusb2_nxt */
+ OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* etk_d14.hsusb2_data0 */
+ OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* etk_d15.hsusb2_data1 */
+ OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)
+ >;
+ };
+};
+
+&gpmc {
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ linux,mtd-name = "micron,mt29f2g16abdhc";
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ ti,nand-ecc-opt = "bch8";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-gta04.dtsi b/src/arm/ti/omap/omap3-gta04.dtsi
new file mode 100644
index 0000000..3661340
--- /dev/null
+++ b/src/arm/ti/omap/omap3-gta04.dtsi
@@ -0,0 +1,893 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
+ *
+ * Based on omap3-beagle-xm.dts
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "OMAP3 GTA04";
+ compatible = "goldelico,gta04", "ti,omap3630", "ti,omap3";
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ display0 = &lcd;
+ display1 = &tv0;
+ /delete-property/ mmc2;
+ /delete-property/ mmc3;
+ };
+
+ ldo_3v3: fixedregulator {
+ compatible = "regulator-fixed";
+ regulator-name = "ldo_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* fixed 26MHz oscillator */
+ hfclk_26m: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ aux-button {
+ label = "aux";
+ linux,code = <KEY_PHONE>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
+ };
+ };
+
+ antenna-detect {
+ compatible = "gpio-keys";
+
+ gps_antenna_button: gps-antenna-button {
+ label = "GPS_EXT_ANT";
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LINEIN_INSERT>;
+ gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */
+ interrupt-parent = <&gpio5>;
+ interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "gta04";
+
+ ti,mcbsp = <&mcbsp2>;
+ };
+
+ /* GSM audio */
+ sound_telephony {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "GTA04 voice";
+ simple-audio-card,bitclock-master = <&telephony_link_master>;
+ simple-audio-card,frame-master = <&telephony_link_master>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-inversion;
+ simple-audio-card,frame-inversion;
+ simple-audio-card,cpu {
+ sound-dai = <&mcbsp4>;
+ };
+
+ telephony_link_master: simple-audio-card,codec {
+ sound-dai = <>m601_codec>;
+ };
+ };
+
+ gtm601_codec: gsm_codec {
+ compatible = "option,gtm601";
+ #sound-dai-cells = <0>;
+ };
+
+ spi_lcd: spi {
+ compatible = "spi-gpio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_gpio_pins>;
+
+ sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ /* lcd panel */
+ lcd: td028ttec1@0 {
+ compatible = "tpo,td028ttec1";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ backlight = <&backlight>;
+ label = "lcd";
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm11 0 12000000 0>;
+ pwm-names = "backlight";
+ brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <9>; /* => 90 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+ };
+
+ pwm11: pwm-11 {
+ compatible = "ti,omap-dmtimer-pwm";
+ ti,timers = <&timer11>;
+ #pwm-cells = <3>;
+ ti,clock-source = <0x01>;
+ };
+
+ hsusb2_phy: hsusb2-phy-pins {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+ #phy-cells = <0>;
+ };
+
+ tv0: connector {
+ compatible = "composite-video-connector";
+ label = "tv";
+
+ port {
+ tv_connector_in: endpoint {
+ remote-endpoint = <&opa_out>;
+ };
+ };
+ };
+
+ tv_amp: opa362 {
+ compatible = "ti,opa362";
+ enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; /* GPIO_23 to enable video out amplifier */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ opa_in: endpoint {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ opa_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ };
+ };
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */
+ };
+
+ /* devconf0 setup for mcbsp1 clock pins */
+ pinmux@48002274 {
+ compatible = "pinctrl-single";
+ reg = <0x48002274 4>; /* CONTROL_DEVCONF0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x7>; /* MCBSP1 CLK pinmux */
+ #pinctrl-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_devconf0_pins>;
+ mcbsp1_devconf0_pins: mcbsp1-devconf0-pins {
+ /* offset bits mask */
+ pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */
+ };
+ };
+
+ /* devconf1 setup for tvout pins */
+ pinmux@480022d8 {
+ compatible = "pinctrl-single";
+ reg = <0x480022d8 4>; /* CONTROL_DEVCONF1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x81>; /* TV out pin control */
+ #pinctrl-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tv_acbias_devconf1_pins>;
+ tv_acbias_devconf1_pins: tv-acbias-devconf1-pins {
+ /* offset bits mask */
+ pinctrl-single,bits = <0x00 0x40800 0x40800>; /* set TVOUTBYPASS and TVOUTACEN */
+ };
+ };
+};
+
+&omap3_pmx_wkup {
+ gpio1_pins: gpio1-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
+ OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_clkout.gpio_10 */
+ >;
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_pins
+ >;
+
+ hsusb2_pins: hsusb2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
+ OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
+ >;
+ };
+
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ backlight_pins: backlight-pinmux-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */
+ >;
+ };
+
+ dss_dpi_pins: dss-dpi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ gps_pins: gps-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */
+ >;
+ };
+
+ hdq_pins: hdq-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
+ >;
+ };
+
+ bmp085_pins: bmp085-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */
+ >;
+ };
+
+ bma180_pins: bma180-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
+ >;
+ };
+
+ itg3200_pins: itg3200-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */
+ >;
+ };
+
+ hmc5843_pins: hmc5843-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
+ >;
+ };
+
+ penirq_pins: penirq-pins {
+ pinctrl-single,pins = <
+ /* here we could enable to wakeup the cpu from suspend by a pen touch */
+ OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
+ >;
+ };
+
+ camera_pins: camera-pins {
+ pinctrl-single,pins = <
+ /* set up parallel camera interface */
+ OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */
+ OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */
+ OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
+ OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */
+ OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */
+ OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */
+ OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */
+ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */
+ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */
+ OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */
+ OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */
+ OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+ OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+ OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */
+ OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */
+ OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */
+ >;
+ };
+
+ mcbsp1_pins: mcbsp1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4) /* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_clkr.mcbsp1_fsr */
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */
+ /* mcbsp_clks is used as PENIRQ */
+ /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) mcbsp_clks.mcbsp_clks */
+ OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */
+ OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */
+ >;
+ };
+
+ mcbsp2_pins: mcbsp2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dx */
+ >;
+ };
+
+ mcbsp3_pins: mcbsp3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dx */
+ OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dr */
+ OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_clkx */
+ OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_fsx */
+ >;
+ };
+
+ mcbsp4_pins: mcbsp4-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_clkx */
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_dr */
+ OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_dx.mcbsp4_fsx */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_2_pins
+ >;
+
+ hsusb2_2_pins: hsusb2-2-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+
+ spi_gpio_pins: spi-gpio-pinmux-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
+ OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */
+ OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */
+ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */
+ >;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ clocks = <&hfclk_26m>;
+ clock-names = "fck";
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ ti,enable-vibra = <1>;
+ codec {
+ ti,ramp_delay_value = <3>;
+ };
+ };
+
+ twl_power: power {
+ compatible = "ti,twl4030-power-idle";
+ ti,system-power-controller;
+ };
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+
+ /* pressure sensor */
+ bmp085@77 {
+ compatible = "bosch,bmp085";
+ reg = <0x77>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bmp085_pins>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
+ vdda-supply = <&vio>;
+ vddd-supply = <&vio>;
+ };
+
+ /* accelerometer */
+ bma180@41 {
+ compatible = "bosch,bma180";
+ reg = <0x41>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bma180_pins>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
+ };
+
+ /* gyroscope */
+ itg3200@68 {
+ compatible = "invensense,itg3200";
+ reg = <0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&itg3200_pins>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */
+ };
+
+ /* leds + gpios */
+ tca6507: tca6507@45 {
+ compatible = "ti,tca6507";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x45>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gta04_led0: led@0 {
+ label = "gta04:red:aux";
+ reg = <0x0>;
+ };
+
+ gta04_led1: led@1 {
+ label = "gta04:green:aux";
+ reg = <0x1>;
+ };
+
+ gta04_led3: led@3 {
+ label = "gta04:red:power";
+ reg = <0x3>;
+ linux,default-trigger = "default-on";
+ };
+
+ gta04_led4: led@4 {
+ label = "gta04:green:power";
+ reg = <0x4>;
+ };
+
+ wifi_reset: led@6 {
+ /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
+ reg = <0x6>;
+ compatible = "gpio";
+ };
+ };
+
+ /* compass aka magnetometer */
+ hmc5843@1e {
+ compatible = "honeywell,hmc5883l";
+ reg = <0x1e>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hmc5843_pins>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>; /* gpio112 */
+ };
+
+ /* touchscreen */
+ tsc2007@48 {
+ compatible = "ti,tsc2007";
+ reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&penirq_pins>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
+ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* GPIO_160 */
+ ti,x-plate-ohms = <600>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <640>;
+ touchscreen-max-pressure = <1000>;
+ touchscreen-fuzz-x = <3>;
+ touchscreen-fuzz-y = <8>;
+ touchscreen-fuzz-pressure = <10>;
+ touchscreen-inverted-y;
+ };
+
+ /* RFID EEPROM */
+ m24lr64@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+};
+
+&mcspi1 {
+ status = "disabled";
+};
+
+&mcspi2 {
+ status = "disabled";
+};
+
+&mcspi3 {
+ status = "disabled";
+};
+
+&mcspi4 {
+ status = "disabled";
+};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
+
+&usbhshost {
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy>;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+ ti,non-removable;
+ broken-cd; /* hardware has no CD */
+};
+
+&mmc2 {
+ vmmc-supply = <&vaux4>;
+ bus-width = <4>;
+ ti,non-removable;
+ cap-power-off-card;
+ mmc-pwrseq = <&wifi_pwrseq>;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+#define BIT(x) (1 << (x))
+&twl_gpio {
+ /* pullups: BIT(2) */
+ ti,pullups = <BIT(2)>;
+ /*
+ * pulldowns:
+ * BIT(0), BIT(1), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) |
+ BIT(13) | BIT(15) | BIT(16) | BIT(17))>;
+};
+
+&twl_keypad {
+ status = "disabled";
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_pins>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ gnss: gnss {
+ compatible = "wi2wi,w2sg0004";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gps_pins>;
+ sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ lna-supply = <&vsim>;
+ vcc-supply = <&ldo_3v3>;
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&charger {
+ ti,bb-uvolt = <3200000>;
+ ti,bb-uamp = <150>;
+};
+
+/* spare */
+&vaux1 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+};
+
+/* sensors */
+&vaux2 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on; /* we should never switch off while vio is on! */
+};
+
+/* camera */
+&vaux3 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+};
+
+/* WLAN/BT */
+&vaux4 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3150000>;
+};
+
+/* GPS LNA */
+&vsim {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3150000>;
+};
+
+/* Needed to power the DPI pins */
+
+&vpll2 {
+ regulator-always-on;
+};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = < &dss_dpi_pins >;
+
+ status = "okay";
+ vdds_dsi-supply = <&vpll2>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&venc {
+ status = "okay";
+
+ vdda-supply = <&vdac>;
+
+ port {
+ venc_out: endpoint {
+ remote-endpoint = <&opa_in>;
+ ti,channels = <1>;
+ ti,invert-polarity;
+ };
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ ti,nand-ecc-opt = "ham1";
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ nand-bus-width = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gpmc,device-width = <2>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,we-off-ns = <40>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,sync-clk-ps = <0>;
+
+ x-loader@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+
+ bootloaders@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1c0000>;
+ };
+
+ bootloaders_env@240000 {
+ label = "U-Boot Env";
+ reg = <0x240000 0x40000>;
+ };
+
+ kernel@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x600000>;
+ };
+
+ filesystem@880000 {
+ label = "File System";
+ reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */
+ };
+ };
+};
+
+&mcbsp1 { /* FM Transceiver PCM */
+ status = "okay";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 { /* TPS65950 I2S */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&mcbsp3 { /* Bluetooth PCM */
+ status = "okay";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp3_pins>;
+};
+
+&mcbsp4 { /* GSM voice PCM */
+ status = "okay";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp4_pins>;
+};
+
+&hdqw1w {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdq_pins>;
+};
+
+/* image signal processor within OMAP3 SoC */
+&isp {
+ ports {
+ port@0 {
+ reg = <0>;
+ parallel_ep: endpoint {
+ ti,isp-clock-divisor = <1>;
+ ti,strobe-mode;
+ bus-width = <8>;/* Used data lines */
+ data-shift = <2>; /* Lines 9:2 are used */
+ hsync-active = <0>; /* Active low */
+ vsync-active = <1>; /* Active high */
+ data-active = <1>;/* Active high */
+ pclk-sample = <1>;/* Falling */
+ };
+ };
+ /* port@1 and port@2 are not used by GTA04 */
+ };
+};
diff --git a/src/arm/ti/omap/omap3-gta04a3.dts b/src/arm/ti/omap/omap3-gta04a3.dts
new file mode 100644
index 0000000..bfae1a9
--- /dev/null
+++ b/src/arm/ti/omap/omap3-gta04a3.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com>
+ */
+
+#include "omap3-gta04.dtsi"
+
+/ {
+ model = "Goldelico GTA04A3/Letux 2804";
+};
+
+&i2c2 {
+
+ /* alternate accelerometer that might be installed on some GTA04A3 boards */
+ lis302@1d {
+ compatible = "st,lis331dlh", "st,lis3lv02d";
+ reg = <0x1d>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+ Vdd-supply = <&vaux2>;
+ Vdd_IO-supply = <&vaux2>;
+
+ st,click-single-x;
+ st,click-single-y;
+ st,click-single-z;
+ st,click-thresh-x = <8>;
+ st,click-thresh-y = <8>;
+ st,click-thresh-z = <10>;
+ st,click-click-time-limit = <9>;
+ st,click-latency = <50>;
+ st,irq1-click;
+ st,wakeup-x-lo;
+ st,wakeup-x-hi;
+ st,wakeup-y-lo;
+ st,wakeup-y-hi;
+ st,wakeup-z-lo;
+ st,wakeup-z-hi;
+ st,min-limit-x = <32>;
+ st,min-limit-y = <3>;
+ st,min-limit-z = <3>;
+ st,max-limit-x = <3>;
+ st,max-limit-y = <32>;
+ st,max-limit-z = <32>;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-gta04a4.dts b/src/arm/ti/omap/omap3-gta04a4.dts
new file mode 100644
index 0000000..f1cf24d
--- /dev/null
+++ b/src/arm/ti/omap/omap3-gta04a4.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Marek Belisko <marek@goldelico.com>
+ */
+
+#include "omap3-gta04.dtsi"
+
+/ {
+ model = "Goldelico GTA04A4/Letux 2804";
+};
diff --git a/src/arm/ti/omap/omap3-gta04a5.dts b/src/arm/ti/omap/omap3-gta04a5.dts
new file mode 100644
index 0000000..8bd6b4b
--- /dev/null
+++ b/src/arm/ti/omap/omap3-gta04a5.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
+ */
+
+#include "omap3-gta04.dtsi"
+
+/ {
+ model = "Goldelico GTA04A5/Letux 2804";
+
+ sound {
+ ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */
+ };
+
+ wlan_en: wlan_en_regulator {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_pins>;
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* GPIO_138 */
+
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pps_pins>;
+
+ gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
+ };
+
+};
+
+&gpio5 {
+ irda-en-hog {
+ gpio-hog;
+ gpios = <(175-160) GPIO_ACTIVE_HIGH>;
+ output-high; /* activate gpio_175 to disable IrDA receiver */
+ };
+};
+
+&omap3_pmx_core {
+ bt_pins: bt-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat5 = mmc3_dat1 = gpio137 */
+ >;
+ };
+
+ wlan_pins: wlan-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat6 = mmc3_dat2 = gpio138 */
+ >;
+ };
+
+ wlan_irq_pin: wlan-irq-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4) /* mmc2_dat7 = mmc3_dat3 = gpio139 */
+ >;
+ };
+
+ irda_pins: irda-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4) /* mcspi1_cs1 = gpio175 */
+ >;
+ };
+
+ pps_pins: pps-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
+ >;
+ };
+
+ bno050_pins: pinmux-bno050-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT | MUX_MODE4) /* gpin113 */
+ >;
+ };
+};
+
+/*
+ * for WL183x module see
+ * Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
+ */
+
+&wifi_pwrseq {
+ /delete-property/ reset-gpios;
+};
+
+&mmc2 {
+ vmmc-supply = <&wlan_en>;
+ bus-width = <4>;
+ cap-power-off-card;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_irq_pin>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /delete-property/ mmc-pwrseq;
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_139 */
+ ref-clock-frequency = <26000000>;
+ };
+};
+
+&i2c2 {
+ /delete-node/ bmp085@77;
+ /delete-node/ bma180@41;
+ /delete-node/ itg3200@68;
+ /delete-node/ hmc5843@1e;
+
+ gyrometer@69 {
+ compatible = "bosch,bmg160";
+ reg = <0x69>;
+ };
+
+ accelerometer@10 {
+ compatible = "bosch,bmc150_accel";
+ reg = <0x10>;
+ };
+
+ magnetometer@12 {
+ compatible = "bosch,bmc150_magn";
+ reg = <0x12>;
+ };
+
+ bme280@76 {
+ compatible = "bosch,bme280";
+ reg = <0x76>;
+ vdda-supply = <&vio>;
+ vddd-supply = <&vio>;
+ };
+
+ imu@29 {
+ compatible = "bosch,bno055";
+ reg = <0x29>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bno050_pins>;
+ /* interrupt at &gpio4 17 */
+ };
+};
diff --git a/src/arm/ti/omap/omap3-gta04a5one.dts b/src/arm/ti/omap/omap3-gta04a5one.dts
new file mode 100644
index 0000000..1e5703d
--- /dev/null
+++ b/src/arm/ti/omap/omap3-gta04a5one.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
+ */
+
+#include "omap3-gta04a5.dts"
+
+/ {
+ model = "Goldelico GTA04A5/Letux 2804 with OneNAND";
+};
+
+&omap3_pmx_core {
+ gpmc_pins: gpmc-pins {
+ pinctrl-single,pins = <
+
+ /* address lines */
+ OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */
+ OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */
+ OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */
+
+ /* data lines, gpmc_d0..d7 not muxable according to TRM */
+ OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */
+ OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */
+ OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */
+ OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */
+ OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */
+ OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */
+ OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */
+ OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */
+
+ /*
+ * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
+ * according to TRM. OneNAND seems to require PIN_INPUT on clock.
+ */
+ OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */
+ OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
+ >;
+ };
+};
+
+&gpmc {
+ /* switch inherited setup to OneNAND */
+
+ ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmc_pins>;
+
+ /delete-node/ nand@0,0;
+
+ onenand@0,0 {
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ti,omap2-onenand";
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
+
+ gpmc,sync-read;
+ gpmc,sync-write;
+ gpmc,burst-length = <16>;
+ gpmc,burst-read;
+ gpmc,burst-wrap;
+ gpmc,burst-write;
+ gpmc,device-width = <2>;
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <87>;
+ gpmc,cs-wr-off-ns = <87>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <10>;
+ gpmc,adv-wr-off-ns = <10>;
+ gpmc,oe-on-ns = <15>;
+ gpmc,oe-off-ns = <87>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <87>;
+ gpmc,rd-cycle-ns = <112>;
+ gpmc,wr-cycle-ns = <112>;
+ gpmc,access-ns = <81>;
+ gpmc,page-burst-access-ns = <15>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <5>;
+ gpmc,wr-data-mux-bus-ns = <30>;
+ gpmc,wr-access-ns = <81>;
+ gpmc,sync-clk-ps = <15000>;
+
+ x-loader@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+
+ bootloaders@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1c0000>;
+ };
+
+ bootloaders_env@240000 {
+ label = "U-Boot Env";
+ reg = <0x240000 0x40000>;
+ };
+
+ kernel@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x600000>;
+ };
+
+ filesystem@880000 {
+ label = "File System";
+ reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */
+ };
+
+ };
+};
diff --git a/src/arm/ti/omap/omap3-ha-common.dtsi b/src/arm/ti/omap/omap3-ha-common.dtsi
new file mode 100644
index 0000000..3a258a6
--- /dev/null
+++ b/src/arm/ti/omap/omap3-ha-common.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ */
+
+#include "omap3-tao3530.dtsi"
+
+/ {
+ gpio_poweroff {
+ pinctrl-names = "default";
+ pinctrl-0 = <&poweroff_pins>;
+
+ compatible = "gpio-poweroff";
+ gpios = <&gpio6 8 GPIO_ACTIVE_LOW>; /* GPIO 168 */
+ };
+};
+
+&omap3_pmx_core {
+ sound2_pins: sound2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x209e, PIN_OUTPUT | MUX_MODE4) /* gpmc_d8 gpio_44 */
+ >;
+ };
+
+ led_blue_pins: led-blue-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE4) /* cam_xclka gpio_96, LED blue */
+ >;
+ };
+
+ led_green_pins: led-green-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2126, PIN_OUTPUT | MUX_MODE4) /* cam_d8 gpio_107, LED green */
+ >;
+ };
+
+ led_red_pins: led-red-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* cam_xclkb gpio_111, LED red */
+ >;
+ };
+
+ poweroff_pins: poweroff-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT_PULLUP | MUX_MODE4) /* i2c2_scl gpio_168 */
+ >;
+ };
+
+ powerdown_input_pins: powerdown-input-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE4) /* i2c2_sda gpio_183 */
+ >;
+ };
+
+ fpga_boot0_pins: fpga-boot0-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2 gpio_101 */
+ OMAP3_CORE1_IOPAD(0x211c, PIN_OUTPUT | MUX_MODE4) /* cam_d3 gpio_102 */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE4) /* cam_d4 gpio_103 */
+ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d5 gpio_104 */
+ >;
+ };
+
+ fpga_boot1_pins: fpga-boot1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE4) /* gpmc_d10 gpio_46 */
+ OMAP3_CORE1_IOPAD(0x20a4, PIN_OUTPUT | MUX_MODE4) /* gpmc_d11 gpio_47 */
+ OMAP3_CORE1_IOPAD(0x20a6, PIN_OUTPUT | MUX_MODE4) /* gpmc_d12 gpio_48 */
+ OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_d13 gpio_49 */
+ >;
+ };
+};
+
+/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+};
diff --git a/src/arm/ti/omap/omap3-ha-lcd.dts b/src/arm/ti/omap/omap3-ha-lcd.dts
new file mode 100644
index 0000000..94f6b79
--- /dev/null
+++ b/src/arm/ti/omap/omap3-ha-lcd.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ */
+
+#include "omap3-ha-common.dtsi"
+
+/ {
+ model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM";
+ compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusbb2_pins
+ &powerdown_input_pins
+ &fpga_boot0_pins
+ &fpga_boot1_pins
+ &led_blue_pins
+ &led_green_pins
+ &led_red_pins
+ &touchscreen_wake_pins
+ >;
+
+ touchscreen_irq_pins: touchscreen-irq-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio_136, Touchscreen IRQ */
+ >;
+ };
+
+ touchscreen_wake_pins: touchscreen-wake-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x212c, PIN_OUTPUT_PULLUP | MUX_MODE4) /* gpio_110, Touchscreen Wake */
+ >;
+ };
+
+ dss_dpi_pins: dss-dpi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ lte430_pins: lte430-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */
+ >;
+ };
+
+ backlight_pins: backlight-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */
+ >;
+ };
+};
+
+/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+ regulator-always-on;
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+/ {
+ aliases {
+ display0 = &lcd0;
+ };
+
+ lcd0: display {
+ compatible = "panel-dpi";
+ label = "lcd";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <<e430_pins>;
+ enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <31250000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <86>;
+ hsync-len = <1>;
+ vback-porch = <30>;
+ vfront-porch = <13>;
+ vsync-len = <3>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+ backlight {
+ compatible = "gpio-backlight";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+ gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 */
+
+ default-on;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-ha.dts b/src/arm/ti/omap/omap3-ha.dts
new file mode 100644
index 0000000..19e471e
--- /dev/null
+++ b/src/arm/ti/omap/omap3-ha.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ */
+
+#include "omap3-ha-common.dtsi"
+
+/ {
+ model = "TI OMAP3 HEAD acoustics baseboard with TAO3530 SOM";
+ compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusbb2_pins
+ &powerdown_input_pins
+ &fpga_boot0_pins
+ &fpga_boot1_pins
+ &led_blue_pins
+ &led_green_pins
+ &led_red_pins
+ >;
+};
diff --git a/src/arm/ti/omap/omap3-igep.dtsi b/src/arm/ti/omap/omap3-igep.dtsi
new file mode 100644
index 0000000..e068ecf
--- /dev/null
+++ b/src/arm/ti/omap/omap3-igep.dtsi
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Common device tree for IGEP boards based on AM/DM37x
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+
+/ {
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "igep2";
+ ti,mcbsp = <&mcbsp2>;
+ };
+
+ vdd33: regulator-vdd33 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd33";
+ regulator-always-on;
+ };
+
+};
+
+&omap3_pmx_core {
+ gpmc_pins: gpmc-pins {
+ pinctrl-single,pins = <
+ /* OneNAND seems to require PIN_INPUT on clock. */
+ OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
+ >;
+ };
+
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
+ >;
+ };
+
+ mcbsp2_pins: mcbsp2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
+ >;
+ };
+};
+
+&gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmc_pins>;
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ linux,mtd-name = "micron,mt29c4g96maz";
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ ti,nand-ecc-opt = "bch8";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ status = "okay";
+ };
+
+ onenand@0,0 {
+ compatible = "ti,omap2-onenand";
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
+
+ gpmc,sync-read;
+ gpmc,sync-write;
+ gpmc,burst-length = <16>;
+ gpmc,burst-wrap;
+ gpmc,burst-read;
+ gpmc,burst-write;
+ gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
+ gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <96>;
+ gpmc,cs-wr-off-ns = <96>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <12>;
+ gpmc,adv-wr-off-ns = <12>;
+ gpmc,oe-on-ns = <18>;
+ gpmc,oe-off-ns = <96>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <96>;
+ gpmc,rd-cycle-ns = <114>;
+ gpmc,wr-cycle-ns = <114>;
+ gpmc,access-ns = <90>;
+ gpmc,page-burst-access-ns = <12>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <6>;
+ gpmc,wr-data-mux-bus-ns = <30>;
+ gpmc,wr-access-ns = <90>;
+ gpmc,sync-clk-ps = <12000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ status = "disabled";
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+};
+
+&mcbsp2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc1>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <4>;
+ cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&twl_gpio {
+ ti,use-leds;
+};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
diff --git a/src/arm/ti/omap/omap3-igep0020-common.dtsi b/src/arm/ti/omap/omap3-igep0020-common.dtsi
new file mode 100644
index 0000000..13f4346
--- /dev/null
+++ b/src/arm/ti/omap/omap3-igep0020-common.dtsi
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Common Device Tree Source for IGEPv2
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ */
+
+#include "omap3-igep.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins>;
+ compatible = "gpio-leds";
+
+ boot {
+ label = "omap3:green:boot";
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ user0 {
+ label = "omap3:red:user0";
+ gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ user1 {
+ label = "omap3:red:user1";
+ gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ user2 {
+ label = "omap3:green:user1";
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ /* HS USB Port 1 Power */
+ hsusb1_power: hsusb1_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */
+ startup-delay-us = <70000>;
+ };
+
+ /* HS USB Host PHY on PORT 1 */
+ hsusb1_phy: hsusb1_phy {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
+ vcc-supply = <&hsusb1_power>;
+ #phy-cells = <0>;
+ };
+
+ tfp410: encoder {
+ compatible = "ti,tfp410";
+ powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ digital;
+
+ ddc-i2c-bus = <&i2c3>;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &tfp410_pins
+ &dss_dpi_pins
+ >;
+
+ tfp410_pins: tfp410-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
+ >;
+ };
+
+ dss_dpi_pins: dss-dpi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ >;
+ };
+
+ smsc9221_pins: smsc9221-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusbb1_pins
+ >;
+
+ hsusbb1_pins: hsusbb1-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
+ OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
+ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
+ OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
+ OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
+ OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
+ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
+ OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
+ OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
+ >;
+ };
+
+ leds_pins: leds-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
+ OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
+ OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
+ >;
+ };
+
+ mmc1_wp_pins: mmc1-cd-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4) /* etk_d15.gpio_29 */
+ >;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ /*
+ * Display monitor features are burnt in the EEPROM
+ * as EDID data.
+ */
+ eeprom@50 {
+ compatible = "ti,eeprom";
+ reg = <0x50>;
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x01000000>, /* CS0: 16MB for NAND */
+ <5 0 0x2c000000 0x01000000>; /* CS5: 16MB for ethernet */
+
+ ethernet@gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc9221_pins>;
+ reg = <5 0 0xff>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&usbhshost {
+ port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy>;
+};
+
+&vpll2 {
+ /* Needed for DSS */
+ regulator-name = "vdds_dsi";
+};
+
+&dss {
+ status = "okay";
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&mmc1 {
+ pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>;
+ wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; /* gpio_29 */
+};
diff --git a/src/arm/ti/omap/omap3-igep0020-rev-f.dts b/src/arm/ti/omap/omap3-igep0020-rev-f.dts
new file mode 100644
index 0000000..316e8e6
--- /dev/null
+++ b/src/arm/ti/omap/omap3-igep0020-rev-f.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) Javier Martinez Canillas <javier@dowhile0.org>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ */
+
+#include "omap3-igep0020-common.dtsi"
+
+/ {
+ model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)";
+ compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap3";
+
+ /* Regulator to trigger the WL_EN signal of the Wifi module */
+ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbep5clwmc-wlen";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */
+ enable-active-high;
+ };
+};
+
+&omap3_pmx_core {
+ lbep5clwmc_pins: lbep5clwmc-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT | MUX_MODE4) /* mcspi1_cs3.gpio_177 - W_IRQ */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - BT_EN */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - WL_EN */
+ >;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
+ vmmc-supply = <&lbep5clwmc_wlen>;
+ bus-width = <4>;
+ non-removable;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 177 */
+ };
+};
+
+&uart2 {
+ bluetooth {
+ compatible = "ti,wl1835-st";
+ enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
+ max-speed = <300000>;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-igep0020.dts b/src/arm/ti/omap/omap3-igep0020.dts
new file mode 100644
index 0000000..232cf91
--- /dev/null
+++ b/src/arm/ti/omap/omap3-igep0020.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ */
+
+#include "omap3-igep0020-common.dtsi"
+
+/ {
+ model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
+ compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap3";
+
+ vmmcsdio_fixed: fixedregulator-mmcsdio {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsdio_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ mmc2_pwrseq: mmc2_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>, /* gpio_139 - RESET_N_W */
+ <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 - WIFI_PDN */
+ };
+};
+
+&omap3_pmx_core {
+ lbee1usjyc_pins: lbee1usjyc-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 - WIFI_PDN */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */
+ >;
+ };
+};
+
+/* On board Wifi module */
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
+ vmmc-supply = <&vmmcsdio_fixed>;
+ mmc-pwrseq = <&mmc2_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+};
diff --git a/src/arm/ti/omap/omap3-igep0030-common.dtsi b/src/arm/ti/omap/omap3-igep0030-common.dtsi
new file mode 100644
index 0000000..d434f75
--- /dev/null
+++ b/src/arm/ti/omap/omap3-igep0030-common.dtsi
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Common Device Tree Source for IGEP COM MODULE
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ */
+
+#include "omap3-igep.dtsi"
+
+/ {
+ leds: gpio_leds {
+ compatible = "gpio-leds";
+
+ user0 {
+ label = "omap3:red:user0";
+ gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
+ default-state = "off";
+ };
+
+ user1 {
+ label = "omap3:green:user1";
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */
+ default-state = "off";
+ };
+
+ user2 {
+ label = "omap3:red:user1";
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* gpio_16 */
+ default-state = "off";
+ };
+ };
+
+ hsusb2_phy: hsusb2-phy-pins {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */
+ #phy-cells = <0>;
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb2_pins>;
+
+ hsusb2_pins: hsusb2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
+ OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_dr.uart2_rts */
+ OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clk.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb2_core2_pins>;
+
+ hsusb2_core2_pins: hsusb2-core2-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+
+ leds_core2_pins: leds-core2-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
+ >;
+ };
+};
+
+&usbhshost {
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */
+};
diff --git a/src/arm/ti/omap/omap3-igep0030-rev-g.dts b/src/arm/ti/omap/omap3-igep0030-rev-g.dts
new file mode 100644
index 0000000..fddd7c8
--- /dev/null
+++ b/src/arm/ti/omap/omap3-igep0030-rev-g.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ */
+
+#include "omap3-igep0030-common.dtsi"
+
+/ {
+ model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
+ compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap3";
+
+ /* Regulator to trigger the WL_EN signal of the Wifi module */
+ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbep5clwmc-wlen";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */
+ enable-active-high;
+ };
+};
+
+&omap3_pmx_core {
+ lbep5clwmc_pins: lbep5clwmc-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 - W_IRQ */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - BT_EN */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - WL_EN */
+ >;
+ };
+
+ leds_pins: leds-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4) /* i2c2_scl.gpio_168 */
+ >;
+ };
+
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins &leds_core2_pins>;
+
+ boot {
+ label = "omap3:green:boot";
+ gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
+ vmmc-supply = <&lbep5clwmc_wlen>;
+ bus-width = <4>;
+ non-removable;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
+ };
+};
+
+&uart2 {
+ bluetooth {
+ compatible = "ti,wl1835-st";
+ enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
+ max-speed = <300000>;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-igep0030.dts b/src/arm/ti/omap/omap3-igep0030.dts
new file mode 100644
index 0000000..e3f99db
--- /dev/null
+++ b/src/arm/ti/omap/omap3-igep0030.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ */
+
+#include "omap3-igep0030-common.dtsi"
+
+/ {
+ model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
+ compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap3";
+
+ vmmcsdio_fixed: fixedregulator-mmcsdio {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsdio_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ mmc2_pwrseq: mmc2_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>, /* gpio_139 - RESET_N_W */
+ <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 - WIFI_PDN */
+ };
+};
+
+&omap3_pmx_core {
+ lbee1usjyc_pins: lbee1usjyc-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 - WIFI_PDN */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */
+ >;
+ };
+};
+
+&leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_core2_pins>;
+
+ boot {
+ label = "omap3:green:boot";
+ gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>; /* LEDSYNC */
+ default-state = "on";
+ };
+};
+
+/* On board Wifi module */
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
+ vmmc-supply = <&vmmcsdio_fixed>;
+ mmc-pwrseq = <&mmc2_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+};
+
diff --git a/src/arm/ti/omap/omap3-ldp.dts b/src/arm/ti/omap/omap3-ldp.dts
new file mode 100644
index 0000000..bb6fab9
--- /dev/null
+++ b/src/arm/ti/omap/omap3-ldp.dts
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "omap34xx.dtsi"
+#include "omap-gpmc-smsc911x.dtsi"
+
+/ {
+ model = "TI OMAP3430 LDP (Zoom1 Labrador)";
+ compatible = "ti,omap3-ldp", "ti,omap3430", "ti,omap3";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>; /* 128 MB */
+ };
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_key_pins>;
+
+ key_enter {
+ label = "enter";
+ gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
+ linux,code = <KEY_ENTER>;
+ wakeup-source;
+ };
+
+ key_f1 {
+ label = "f1";
+ gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
+ linux,code = <KEY_F1>;
+ wakeup-source;
+ };
+
+ key_f2 {
+ label = "f2";
+ gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
+ linux,code = <KEY_F2>;
+ wakeup-source;
+ };
+
+ key_f3 {
+ label = "f3";
+ gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
+ linux,code = <KEY_F3>;
+ wakeup-source;
+ };
+
+ key_f4 {
+ label = "f4";
+ gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
+ linux,code = <KEY_F4>;
+ wakeup-source;
+ };
+
+ key_left {
+ label = "left";
+ gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
+ linux,code = <KEY_LEFT>;
+ wakeup-source;
+ };
+
+ key_right {
+ label = "right";
+ gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
+ linux,code = <KEY_RIGHT>;
+ wakeup-source;
+ };
+
+ key_up {
+ label = "up";
+ gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
+ linux,code = <KEY_UP>;
+ wakeup-source;
+ };
+
+ key_down {
+ label = "down";
+ gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
+ linux,code = <KEY_DOWN>;
+ wakeup-source;
+ };
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>, /* CS0 space, 16MB */
+ <1 0 0x08000000 0x1000000>; /* CS1 space, 16MB */
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ linux,mtd-name = "micron,nand";
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ ti,nand-ecc-opt = "bch8";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+ partition@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x140000>;
+ };
+ partition@1c0000 {
+ label = "Environment";
+ reg = <0x1c0000 0x40000>;
+ };
+ partition@200000 {
+ label = "Kernel";
+ reg = <0x200000 0x1e00000>;
+ };
+ partition@2000000 {
+ label = "Filesystem";
+ reg = <0x2000000 0x6000000>;
+ };
+ };
+
+ ethernet@gpmc {
+ interrupt-parent = <&gpio5>;
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+ reg = <1 0 0xff>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_power: power {
+ compatible = "ti,twl4030-power-idle";
+ ti,use_poweroff;
+ };
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+#include "omap3-panel-sharp-ls037v7dw01.dtsi"
+
+&backlight0 {
+ gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+};
+
+/* tps61130rsa enabled by twl4030 regen */
+&lcd_3v3 {
+ regulator-always-on;
+};
+
+&lcd0 {
+ enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>; /* lcd INI */
+ reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; /* gpio55, lcd RESB */
+ mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio56, lcd MO */
+};
+
+&mcspi1 {
+ tsc2046@0 {
+ interrupt-parent = <&gpio2>;
+ interrupts = <22 0>; /* gpio54 */
+ pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&mmc1 {
+ /* See 35xx errata 2.1.1.128 in SPRZ278F */
+ compatible = "ti,omap3-pre-es3-hsmmc";
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&omap3_pmx_core {
+ gpio_key_pins: gpio-key-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */
+ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */
+ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */
+ OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */
+ OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */
+ OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */
+ >;
+ };
+
+ musb_pins: musb-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
+ OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
+ OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
+ OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
+ OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
+ OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
+ OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
+ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
+ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
+ OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
+ OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
+ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.mmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
+ >;
+ };
+};
+
+&twl_keypad {
+ linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
+ MATRIX_KEY(0, 1, KEY_2)
+ MATRIX_KEY(0, 2, KEY_3)
+ MATRIX_KEY(1, 0, KEY_4)
+ MATRIX_KEY(1, 1, KEY_5)
+ MATRIX_KEY(1, 2, KEY_6)
+ MATRIX_KEY(1, 3, KEY_F5)
+ MATRIX_KEY(2, 0, KEY_7)
+ MATRIX_KEY(2, 1, KEY_8)
+ MATRIX_KEY(2, 2, KEY_9)
+ MATRIX_KEY(2, 3, KEY_F6)
+ MATRIX_KEY(3, 0, KEY_F7)
+ MATRIX_KEY(3, 1, KEY_0)
+ MATRIX_KEY(3, 2, KEY_F8)
+ MATRIX_KEY(5, 4, KEY_RESERVED)
+ MATRIX_KEY(4, 4, KEY_VOLUMEUP)
+ MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)>;
+};
+
+&uart3 {
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&usb_otg_hs {
+ pinctrl-names = "default";
+ pinctrl-0 = <&musb_pins>;
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ mode = <3>;
+ power = <50>;
+};
+
+&vaux1 {
+ /* Needed for ads7846 */
+ regulator-name = "vcc";
+};
diff --git a/src/arm/ti/omap/omap3-lilly-a83x.dtsi b/src/arm/ti/omap/omap3-lilly-a83x.dtsi
new file mode 100644
index 0000000..565a6c0
--- /dev/null
+++ b/src/arm/ti/omap/omap3-lilly-a83x.dtsi
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
+ */
+
+#include "omap36xx.dtsi"
+
+/ {
+ model = "INCOstartec LILLY-A83X module (DM3730)";
+ compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+
+ chosen {
+ bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>; /* 128 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "lilly-a83x::led1";
+ gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "lilly-a83x";
+
+ ti,mcbsp = <&mcbsp2>;
+ };
+
+ reg_vcc3: vcc3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ hsusb1_phy: hsusb1_phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <®_vcc3>;
+ #phy-cells = <0>;
+ };
+};
+
+&omap3_pmx_wkup {
+ pinctrl-names = "default";
+
+ lan9221_pins: lan9221-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
+ >;
+ };
+
+ tsc2048_pins: tsc2048-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot6.gpio_8 */
+ >;
+ };
+
+ mmc1cd_pins: mmc1cd-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 */
+ >;
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
+ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */
+ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clkx.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
+ >;
+ };
+
+ hsusb1_pins: hsusb1-pins {
+ pinctrl-single,pins = <
+
+ /* GPIO 182 controls USB-Hub reset. But USB-Phy its
+ * reset can't be controlled. So we clamp this GPIO to
+ * high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub.
+ */
+
+ OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4) /* mcspi2_cs1.gpio_182 */
+ >;
+ };
+
+ hsusb_otg_pins: hsusb-otg-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
+ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
+ OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
+ OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
+ OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
+ OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
+ OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
+ OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
+ OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
+ OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
+ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
+ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ spi2_pins: spi2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_clk.mcspi2_clk */
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_simo.mcspi2_simo */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_somi.mcspi2_somi */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0.mcspi2_cs0 */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+
+ hsusb1_2_pins: hsusb1-2-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
+ OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
+ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */
+ OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */
+ OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */
+ OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */
+ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */
+ OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */
+ OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */
+ OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */
+ >;
+ };
+
+ gpio1_pins: gpio1-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d15.gpio_29 */
+ >;
+ };
+
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_pins>;
+};
+
+&gpio6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb1_pins>;
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl {
+ vmmc1: regulator-vmmc1 {
+ regulator-always-on;
+ };
+
+ vdd1: regulator-vdd1 {
+ regulator-always-on;
+ };
+
+ vdd2: regulator-vdd2 {
+ regulator-always-on;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <2600000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+};
+
+&i2c3 {
+ clock-frequency = <2600000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ gpiom1: gpio@20 {
+ compatible = "microchip,mcp23017";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+ status = "disabled";
+};
+
+&mmc1 {
+ cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
+ cd-inverted;
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins &mmc1cd_pins>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&mcspi2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins>;
+
+ tsc2046@0 {
+ reg = <0>; /* CS0 */
+ compatible = "ti,tsc2046";
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 0>; /* boot6 / gpio_8 */
+ spi-max-frequency = <1000000>;
+ pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ vcc-supply = <®_vcc3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsc2048_pins>;
+
+ ti,x-min = /bits/ 16 <300>;
+ ti,x-max = /bits/ 16 <3000>;
+ ti,y-min = /bits/ 16 <600>;
+ ti,y-max = /bits/ 16 <3600>;
+ ti,x-plate-ohms = /bits/ 16 <80>;
+ ti,pressure-max = /bits/ 16 <255>;
+ ti,swap-xy;
+
+ wakeup-source;
+ };
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy>;
+};
+
+&usbhshost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb1_2_pins>;
+ num-ports = <2>;
+ port1-mode = "ehci-phy";
+};
+
+&usb_otg_hs {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb_otg_pins>;
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
+
+&mcbsp2 {
+ status = "okay";
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>,
+ <7 0 0x15000000 0x01000000>;
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ nand-bus-width = <16>;
+ ti,nand-ecc-opt = "bch8";
+ /* no elm on omap3 */
+
+ gpmc,mux-add-data = <0>;
+ gpmc,device-width = <2>;
+ gpmc,wait-pin = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,burst-length = <4>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <100>;
+ gpmc,cs-wr-off-ns = <100>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <100>;
+ gpmc,adv-wr-off-ns = <100>;
+ gpmc,oe-on-ns = <5>;
+ gpmc,oe-off-ns = <75>;
+ gpmc,we-on-ns = <5>;
+ gpmc,we-off-ns = <75>;
+ gpmc,rd-cycle-ns = <100>;
+ gpmc,wr-cycle-ns = <100>;
+ gpmc,access-ns = <60>;
+ gpmc,page-burst-access-ns = <5>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-delay-ns = <50>;
+ gpmc,wr-data-mux-bus-ns = <75>;
+ gpmc,wr-access-ns = <155>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "MLO";
+ reg = <0 0x80000>;
+ };
+
+ partition@80000 {
+ label = "u-boot";
+ reg = <0x80000 0x1e0000>;
+ };
+
+ partition@260000 {
+ label = "u-boot-environment";
+ reg = <0x260000 0x20000>;
+ };
+
+ partition@280000 {
+ label = "kernel";
+ reg = <0x280000 0x500000>;
+ };
+
+ partition@780000 {
+ label = "filesystem";
+ reg = <0x780000 0xf880000>;
+ };
+ };
+
+ ethernet@7,0 {
+ compatible = "smsc,lan9221", "smsc,lan9115";
+ bank-width = <2>;
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <10>;
+ gpmc,cs-rd-off-ns = <60>;
+ gpmc,cs-wr-off-ns = <60>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <10>;
+ gpmc,adv-wr-off-ns = <10>;
+ gpmc,oe-on-ns = <10>;
+ gpmc,oe-off-ns = <60>;
+ gpmc,we-on-ns = <10>;
+ gpmc,we-off-ns = <60>;
+ gpmc,rd-cycle-ns = <100>;
+ gpmc,wr-cycle-ns = <100>;
+ gpmc,access-ns = <50>;
+ gpmc,page-burst-access-ns = <5>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <75>;
+ gpmc,wr-data-mux-bus-ns = <15>;
+ gpmc,wr-access-ns = <75>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+ vddvario-supply = <®_vcc3>;
+ vdd33a-supply = <®_vcc3>;
+ reg-io-width = <4>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 0x2>;
+ reg = <7 0 0xff>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lan9221_pins>;
+ phy-mode = "mii";
+ };
+};
diff --git a/src/arm/ti/omap/omap3-lilly-dbb056.dts b/src/arm/ti/omap/omap3-lilly-dbb056.dts
new file mode 100644
index 0000000..0891c66
--- /dev/null
+++ b/src/arm/ti/omap/omap3-lilly-dbb056.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
+ */
+/dts-v1/;
+
+#include "omap3-lilly-a83x.dtsi"
+
+/ {
+ model = "INCOstartec LILLY-DBB056 (DM3730)";
+ compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap3";
+};
+
+&twl {
+ vaux2: regulator-vaux2 {
+ compatible = "ti,twl4030-vaux2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ lan9117_pins: lan9117-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4) /* cam_fld.gpio_98 */
+ >;
+ };
+
+ gpio4_pins: gpio4-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4) /* cam_xclkb.gpio_111 -> sja1000 IRQ */
+ >;
+ };
+
+ gpio5_pins: gpio5-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x218c, PIN_OUTPUT | PIN_OFF_OUTPUT_HIGH | MUX_MODE4) /* mcbsp1_clk.gpio_156 -> enable DSS */
+ >;
+ };
+
+ lcd_pins: lcd-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dir_dat0 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dir_dat1 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dir_cmd */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */
+ OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 -> wp */
+ OMAP3_CORE1_IOPAD(0x219c, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_rts_sd.gpio_164 -> cd */
+ >;
+ };
+
+ spi1_pins: spi1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
+ OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
+ OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+ OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
+ >;
+ };
+};
+
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio4_pins>;
+};
+
+&gpio5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio5_pins>;
+};
+
+&mmc2 {
+ status = "okay";
+ bus-width = <4>;
+ vmmc-supply = <&vmmc1>;
+ cd-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio_164 */
+ wp-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* gpio_163 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ ti,dual-volt;
+};
+
+&mcspi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>, /* nand assigned by COM a83x */
+ <4 0 0x20000000 0x01000000>,
+ <7 0 0x15000000 0x01000000>; /* eth assigend by COM a83x */
+
+ ethernet@4,0 {
+ compatible = "smsc,lan9117", "smsc,lan9115";
+ bank-width = <2>;
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <10>;
+ gpmc,cs-rd-off-ns = <65>;
+ gpmc,cs-wr-off-ns = <65>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <10>;
+ gpmc,adv-wr-off-ns = <10>;
+ gpmc,oe-on-ns = <10>;
+ gpmc,oe-off-ns = <65>;
+ gpmc,we-on-ns = <10>;
+ gpmc,we-off-ns = <65>;
+ gpmc,rd-cycle-ns = <100>;
+ gpmc,wr-cycle-ns = <100>;
+ gpmc,access-ns = <60>;
+ gpmc,page-burst-access-ns = <5>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <75>;
+ gpmc,wr-data-mux-bus-ns = <15>;
+ gpmc,wr-access-ns = <75>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+ vddvario-supply = <®_vcc3>;
+ vdd33a-supply = <®_vcc3>;
+ reg-io-width = <4>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <2 0x2>;
+ reg = <4 0 0xff>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lan9117_pins>;
+ phy-mode = "mii";
+ smsc,force-internal-phy;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-n9.dts b/src/arm/ti/omap/omap3-n9.dts
new file mode 100644
index 0000000..a3cf3f4
--- /dev/null
+++ b/src/arm/ti/omap/omap3-n9.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * omap3-n9.dts - Device Tree file for Nokia N9
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+/dts-v1/;
+
+#include "omap3-n950-n9.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Nokia N9";
+ compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap3";
+};
+
+&i2c2 {
+ smia_1: camera@10 {
+ compatible = "nokia,smia";
+ reg = <0x10>;
+ /* No reset gpio */
+ vana-supply = <&vaux3>;
+ clocks = <&isp 0>;
+ clock-frequency = <9600000>;
+ flash-leds = <&as3645a_flash &as3645a_indicator>;
+ port {
+ smia_1_1: endpoint {
+ link-frequencies = /bits/ 64 <199200000 210000000 499200000>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi2a_ep>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ ak8975@f {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0f>;
+ };
+};
+
+&isp {
+ vdd-csiphy1-supply = <&vaux2>;
+ vdd-csiphy2-supply = <&vaux2>;
+ ports {
+ port@2 {
+ reg = <2>;
+ csi2a_ep: endpoint {
+ remote-endpoint = <&smia_1_1>;
+ clock-lanes = <2>;
+ data-lanes = <1 3>;
+ crc = <1>;
+ lane-polarities = <1 1 1>;
+ };
+ };
+ };
+};
+
+&modem {
+ compatible = "nokia,n9-modem";
+};
+
+&lis302 {
+ st,axis-x = <1>; /* LIS3_DEV_X */
+ st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
+ st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
+
+ st,min-limit-x = <(-46)>;
+ st,min-limit-y = <3>;
+ st,min-limit-z = <3>;
+
+ st,max-limit-x = <(-3)>;
+ st,max-limit-y = <46>;
+ st,max-limit-z = <46>;
+};
+
+&twl_keypad {
+ linux,keymap = < MATRIX_KEY(6, 8, KEY_VOLUMEUP)
+ MATRIX_KEY(7, 8, KEY_VOLUMEDOWN)
+ >;
+};
diff --git a/src/arm/ti/omap/omap3-n900.dts b/src/arm/ti/omap/omap3-n900.dts
new file mode 100644
index 0000000..d334853
--- /dev/null
+++ b/src/arm/ti/omap/omap3-n900.dts
@@ -0,0 +1,1159 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
+ * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+/*
+ * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
+ * for omap AES HW crypto support. When linux kernel try to access memory of AES
+ * blocks then kernel receive "Unhandled fault: external abort on non-linefetch"
+ * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no
+ * crash anymore) omap AES support will be disabled for all Nokia N900 devices.
+ * There is "unofficial" version of bootloader which enables AES in L3 firewall
+ * but it is not widely used and to prevent kernel crash rather AES is disabled.
+ * There is also no runtime detection code if AES is disabled in L3 firewall...
+ */
+&aes1_target {
+ status = "disabled";
+};
+
+&aes2_target {
+ status = "disabled";
+};
+
+/ {
+ model = "Nokia N900";
+ compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
+
+ aliases {
+ i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ display0 = &lcd;
+ display1 = &tv;
+ };
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-heartbeat {
+ label = "debug::sleep";
+ gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* 162 */
+ linux,default-trigger = "default-on";
+ pinctrl-names = "default";
+ pinctrl-0 = <&debug_leds>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ camera_lens_cover {
+ label = "Camera Lens Cover";
+ gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_CAMERA_LENS_COVER>;
+ linux,can-disable;
+ };
+
+ camera_focus {
+ label = "Camera Focus";
+ gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
+ linux,code = <KEY_CAMERA_FOCUS>;
+ linux,can-disable;
+ };
+
+ camera_capture {
+ label = "Camera Capture";
+ gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
+ linux,code = <KEY_CAMERA>;
+ linux,can-disable;
+ };
+
+ lock_button {
+ label = "Lock Button";
+ gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
+ linux,code = <KEY_SCREENLOCK>;
+ linux,can-disable;
+ };
+
+ keypad_slide {
+ label = "Keypad Slide";
+ gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_KEYPAD_SLIDE>;
+ linux,can-disable;
+ };
+
+ proximity_sensor {
+ label = "Proximity Sensor";
+ gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_FRONT_PROXIMITY>;
+ linux,can-disable;
+ };
+
+ machine_cover {
+ label = "Machine Cover";
+ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_MACHINE_COVER>;
+ linux,can-disable;
+ };
+ };
+
+ isp1707: isp1707 {
+ compatible = "nxp,isp1707";
+ nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+ usb-phy = <&usb2_phy>;
+ };
+
+ tv: connector {
+ compatible = "composite-video-connector";
+ label = "tv";
+
+ port {
+ tv_connector_in: endpoint {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+ };
+
+ sound: n900-audio {
+ compatible = "nokia,n900-audio";
+
+ nokia,cpu-dai = <&mcbsp2>;
+ nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
+ nokia,headphone-amplifier = <&tpa6130a2>;
+
+ tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
+ jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
+ eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
+ speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ battery: n900-battery {
+ compatible = "nokia,n900-battery";
+ io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
+ io-channel-names = "temp", "bsi", "vbat";
+ };
+
+ pwm9: pwm-9 {
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer9>;
+ ti,clock-source = <0x00>; /* timer_sys_ck */
+ };
+
+ ir: n900-ir {
+ compatible = "nokia,n900-ir";
+ pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
+ };
+
+ rom_rng: rng {
+ compatible = "nokia,n900-rom-rng";
+ clocks = <&rng_ick>;
+ clock-names = "ick";
+ };
+
+ /* controlled (enabled/disabled) directly by bcm2048 and wl1251 */
+ vctcxo: vctcxo {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ };
+};
+
+&isp {
+ vdds_csib-supply = <&vaux2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&camera_pins>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ csi_isp: endpoint {
+ remote-endpoint = <&csi_cam1>;
+ bus-type = <MEDIA_BUS_TYPE_CCP2>;
+ clock-lanes = <1>;
+ data-lanes = <0>;
+ lane-polarity = <0 0>;
+ /* Select strobe = <1> for back camera, <0> for front camera */
+ strobe = <1>;
+ };
+ };
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */
+ >;
+ };
+
+ ethernet_pins: ethernet-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4) /* dss_data16.gpio_86 */
+ OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */
+ >;
+ };
+
+ gpmc_pins: gpmc-pins {
+ pinctrl-single,pins = <
+
+ /* address lines */
+ OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */
+ OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */
+ OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */
+
+ /* data lines, gpmc_d0..d7 not muxable according to TRM */
+ OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */
+ OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */
+ OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */
+ OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */
+ OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */
+ OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */
+ OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */
+ OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */
+
+ /*
+ * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
+ * according to TRM. OneNAND seems to require PIN_INPUT on clock.
+ */
+ OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */
+ OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ debug_leds: debug-led-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */
+ >;
+ };
+
+ mcspi4_pins: mcspi4-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
+ OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
+ >;
+ };
+
+ acx565akm_pins: acx565akm-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
+ >;
+ };
+
+ dss_sdi_pins: dss-sdi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */
+
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */
+ >;
+ };
+
+ wl1251_pins: wl1251-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */
+ OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */
+ >;
+ };
+
+ ssi_pins: ssi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
+ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
+ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
+ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
+ OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
+ >;
+ };
+
+ modem_pins: modem-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */
+ >;
+ };
+
+ camera_pins: camera-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7) /* cam_hs */
+ OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7) /* cam_vs */
+ OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE7) /* cam_d4 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7 */
+ OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE0) /* cam_d8 */
+ OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE0) /* cam_d9 */
+ OMAP3_CORE1_IOPAD(0x212a, PIN_OUTPUT | MUX_MODE7) /* cam_d10 */
+ OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE7) /* cam_xclkb */
+ OMAP3_CORE1_IOPAD(0x2132, PIN_OUTPUT | MUX_MODE0) /* cam_strobe */
+ >;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <2200000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&vaux1 {
+ regulator-name = "V28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+ regulator-always-on; /* due to battery cover sensor */
+};
+
+&vaux2 {
+ regulator-name = "VCSI";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+};
+
+&vaux3 {
+ regulator-name = "VMMC2_30";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+};
+
+&vaux4 {
+ regulator-name = "VCAM_ANA_28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+};
+
+&vmmc1 {
+ regulator-name = "VMMC1";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+};
+
+&vmmc2 {
+ regulator-name = "V28_A";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+ regulator-always-on; /* due VIO leak to AIC34 VDDs */
+};
+
+&vpll1 {
+ regulator-name = "VPLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+ regulator-always-on;
+};
+
+&vpll2 {
+ regulator-name = "VSDI_CSI";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+ regulator-always-on;
+};
+
+&vsim {
+ regulator-name = "VMMC2_IO_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+};
+
+&vio {
+ regulator-name = "VIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&vintana1 {
+ regulator-name = "VINTANA1";
+ /* fixed to 1500000 */
+ regulator-always-on;
+};
+
+&vintana2 {
+ regulator-name = "VINTANA2";
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ regulator-always-on;
+};
+
+&vintdig {
+ regulator-name = "VINTDIG";
+ /* fixed to 1500000 */
+ regulator-always-on;
+};
+
+/* First two dma channels are reserved on secure omap3 */
+&sdma {
+ dma-channel-mask = <0xfffffffc>;
+};
+
+&twl {
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ ti,enable-vibra = <1>;
+ };
+
+ twl_power: power {
+ compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
+ ti,use_poweroff;
+ };
+};
+
+&twl_keypad {
+ linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
+ MATRIX_KEY(0x00, 0x01, KEY_O)
+ MATRIX_KEY(0x00, 0x02, KEY_P)
+ MATRIX_KEY(0x00, 0x03, KEY_COMMA)
+ MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
+ MATRIX_KEY(0x00, 0x06, KEY_A)
+ MATRIX_KEY(0x00, 0x07, KEY_S)
+
+ MATRIX_KEY(0x01, 0x00, KEY_W)
+ MATRIX_KEY(0x01, 0x01, KEY_D)
+ MATRIX_KEY(0x01, 0x02, KEY_F)
+ MATRIX_KEY(0x01, 0x03, KEY_G)
+ MATRIX_KEY(0x01, 0x04, KEY_H)
+ MATRIX_KEY(0x01, 0x05, KEY_J)
+ MATRIX_KEY(0x01, 0x06, KEY_K)
+ MATRIX_KEY(0x01, 0x07, KEY_L)
+
+ MATRIX_KEY(0x02, 0x00, KEY_E)
+ MATRIX_KEY(0x02, 0x01, KEY_DOT)
+ MATRIX_KEY(0x02, 0x02, KEY_UP)
+ MATRIX_KEY(0x02, 0x03, KEY_ENTER)
+ MATRIX_KEY(0x02, 0x05, KEY_Z)
+ MATRIX_KEY(0x02, 0x06, KEY_X)
+ MATRIX_KEY(0x02, 0x07, KEY_C)
+ MATRIX_KEY(0x02, 0x08, KEY_F9)
+
+ MATRIX_KEY(0x03, 0x00, KEY_R)
+ MATRIX_KEY(0x03, 0x01, KEY_V)
+ MATRIX_KEY(0x03, 0x02, KEY_B)
+ MATRIX_KEY(0x03, 0x03, KEY_N)
+ MATRIX_KEY(0x03, 0x04, KEY_M)
+ MATRIX_KEY(0x03, 0x05, KEY_SPACE)
+ MATRIX_KEY(0x03, 0x06, KEY_SPACE)
+ MATRIX_KEY(0x03, 0x07, KEY_LEFT)
+
+ MATRIX_KEY(0x04, 0x00, KEY_T)
+ MATRIX_KEY(0x04, 0x01, KEY_DOWN)
+ MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
+ MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
+ MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
+ MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
+ MATRIX_KEY(0x04, 0x08, KEY_F10)
+
+ MATRIX_KEY(0x05, 0x00, KEY_Y)
+ MATRIX_KEY(0x05, 0x08, KEY_F11)
+
+ MATRIX_KEY(0x06, 0x00, KEY_U)
+
+ MATRIX_KEY(0x07, 0x00, KEY_I)
+ MATRIX_KEY(0x07, 0x01, KEY_F7)
+ MATRIX_KEY(0x07, 0x02, KEY_F8)
+ >;
+};
+
+&twl_gpio {
+ ti,pullups = <0x0>;
+ ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <100000>;
+
+ tlv320aic3x: tlv320aic3x@18 {
+ compatible = "ti,tlv320aic3x";
+ reg = <0x18>;
+ reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
+ ai3x-gpio-func = <
+ 0 /* AIC3X_GPIO1_FUNC_DISABLED */
+ 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
+ >;
+
+ AVDD-supply = <&vmmc2>;
+ DRVDD-supply = <&vmmc2>;
+ IOVDD-supply = <&vio>;
+ DVDD-supply = <&vio>;
+
+ ai3x-micbias-vg = <1>;
+ };
+
+ tlv320aic3x_aux: tlv320aic3x@19 {
+ compatible = "ti,tlv320aic3x";
+ reg = <0x19>;
+ reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
+
+ AVDD-supply = <&vmmc2>;
+ DRVDD-supply = <&vmmc2>;
+ IOVDD-supply = <&vio>;
+ DVDD-supply = <&vio>;
+
+ ai3x-micbias-vg = <2>;
+ };
+
+ tsl2563: tsl2563@29 {
+ compatible = "amstaos,tsl2563";
+ reg = <0x29>;
+
+ amstaos,cover-comp-gain = <16>;
+ };
+
+ adp1653: led-controller@30 {
+ compatible = "adi,adp1653";
+ reg = <0x30>;
+ enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
+
+ flash {
+ flash-timeout-us = <500000>;
+ flash-max-microamp = <320000>;
+ led-max-microamp = <50000>;
+ };
+ indicator {
+ led-max-microamp = <17500>;
+ };
+ };
+
+ lp5523: lp5523@32 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "national,lp5523";
+ reg = <0x32>;
+ clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+ enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+
+ led@0 {
+ reg = <0>;
+ chan-name = "lp5523:kb1";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ };
+
+ led@1 {
+ reg = <1>;
+ chan-name = "lp5523:kb2";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ };
+
+ led@2 {
+ reg = <2>;
+ chan-name = "lp5523:kb3";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ };
+
+ led@3 {
+ reg = <3>;
+ chan-name = "lp5523:kb4";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ };
+
+ led@4 {
+ reg = <4>;
+ chan-name = "lp5523:b";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led@5 {
+ reg = <5>;
+ chan-name = "lp5523:g";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led@6 {
+ reg = <6>;
+ chan-name = "lp5523:r";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led@7 {
+ reg = <7>;
+ chan-name = "lp5523:kb5";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ };
+
+ led@8 {
+ reg = <8>;
+ chan-name = "lp5523:kb6";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ };
+ };
+
+ bq27200: bq27200@55 {
+ compatible = "ti,bq27200";
+ reg = <0x55>;
+ power-supplies = <&bq24150a>;
+ };
+
+ /* Stereo headphone amplifier */
+ tpa6130a2: tpa6130a2@60 {
+ compatible = "ti,tpa6130a2";
+ reg = <0x60>;
+
+ Vdd-supply = <&vmmc2>;
+
+ power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
+ };
+
+ si4713: si4713@63 {
+ compatible = "silabs,si4713";
+ reg = <0x63>;
+
+ interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
+ reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
+ vio-supply = <&vio>;
+ vdd-supply = <&vaux1>;
+ };
+
+ bq24150a: bq24150a@6b {
+ compatible = "ti,bq24150a";
+ reg = <0x6b>;
+
+ ti,current-limit = <100>;
+ ti,weak-battery-voltage = <3400>;
+ ti,battery-regulation-voltage = <4200>;
+ ti,charge-current = <650>;
+ ti,termination-current = <100>;
+ ti,resistor-sense = <68>;
+
+ ti,usb-charger-detection = <&isp1707>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <400000>;
+
+ accelerometer@1d {
+ compatible = "st,lis302dl";
+ reg = <0x1d>;
+
+ vdd-supply = <&vaux1>;
+ vddio-supply = <&vio>;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>,
+ <20 IRQ_TYPE_EDGE_RISING>; /* 181 and 180 */
+
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
+ };
+
+ cam1: camera@3e {
+ compatible = "toshiba,et8ek8";
+ reg = <0x3e>;
+
+ vana-supply = <&vaux4>;
+
+ clocks = <&isp 0>;
+ clock-names = "extclk";
+ clock-frequency = <9600000>;
+
+ reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
+
+ lens-focus = <&ad5820>;
+
+ port {
+ csi_cam1: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CCP2>;
+ strobe = <1>;
+ clock-inv = <0>;
+ crc = <1>;
+
+ remote-endpoint = <&csi_isp>;
+ };
+ };
+ };
+
+ /* D/A converter for auto-focus */
+ ad5820: dac@c {
+ compatible = "adi,ad5820";
+ reg = <0x0c>;
+
+ VANA-supply = <&vaux4>;
+
+ #io-channel-cells = <0>;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+};
+
+/* most boards use vaux3, only some old versions use vmmc2 instead */
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vaux3>;
+ vqmmc-supply = <&vsim>;
+ bus-width = <8>;
+ non-removable;
+ no-sdio;
+ no-sd;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&gpmc {
+ ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */
+ <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmc_pins>;
+
+ /* sys_ndmareq1 could be used by the driver, not as gpio65 though */
+ onenand@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ti,omap2-onenand";
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
+
+ /*
+ * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
+ * bootloader set values when booted with v5.1
+ * (OneNAND Manufacturer: Samsung):
+ *
+ * cs0 GPMC_CS_CONFIG1: 0xfb001202
+ * cs0 GPMC_CS_CONFIG2: 0x00111100
+ * cs0 GPMC_CS_CONFIG3: 0x00020200
+ * cs0 GPMC_CS_CONFIG4: 0x11001102
+ * cs0 GPMC_CS_CONFIG5: 0x03101616
+ * cs0 GPMC_CS_CONFIG6: 0x90060000
+ */
+ gpmc,sync-read;
+ gpmc,sync-write;
+ gpmc,burst-length = <16>;
+ gpmc,burst-read;
+ gpmc,burst-wrap;
+ gpmc,burst-write;
+ gpmc,device-width = <2>;
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <102>;
+ gpmc,cs-wr-off-ns = <102>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <12>;
+ gpmc,adv-wr-off-ns = <12>;
+ gpmc,oe-on-ns = <12>;
+ gpmc,oe-off-ns = <102>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <102>;
+ gpmc,rd-cycle-ns = <132>;
+ gpmc,wr-cycle-ns = <132>;
+ gpmc,access-ns = <96>;
+ gpmc,page-burst-access-ns = <18>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <6>;
+ gpmc,wr-data-mux-bus-ns = <36>;
+ gpmc,wr-access-ns = <96>;
+ gpmc,sync-clk-ps = <15000>;
+
+ /*
+ * MTD partition table corresponding to Nokia's
+ * Maemo 5 (Fremantle) release.
+ */
+ partition@0 {
+ label = "bootloader";
+ reg = <0x00000000 0x00020000>;
+ read-only;
+ };
+ partition@1 {
+ label = "config";
+ reg = <0x00020000 0x00060000>;
+ };
+ partition@2 {
+ label = "log";
+ reg = <0x00080000 0x00040000>;
+ };
+ partition@3 {
+ label = "kernel";
+ reg = <0x000c0000 0x00200000>;
+ };
+ partition@4 {
+ label = "initfs";
+ reg = <0x002c0000 0x00200000>;
+ };
+ partition@5 {
+ label = "rootfs";
+ reg = <0x004c0000 0x0fb40000>;
+ };
+ };
+
+ /* Ethernet is on some early development boards and qemu */
+ ethernet@gpmc {
+ compatible = "smsc,lan91c94";
+ interrupt-parent = <&gpio2>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
+ reg = <1 0 0xf>; /* 16 byte IO range */
+ bank-width = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <ðernet_pins>;
+ power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */
+ reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */
+ gpmc,device-width = <2>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <48>;
+ gpmc,cs-wr-off-ns = <24>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <0>;
+ gpmc,adv-wr-off-ns = <0>;
+ gpmc,we-on-ns = <12>;
+ gpmc,we-off-ns = <18>;
+ gpmc,oe-on-ns = <12>;
+ gpmc,oe-off-ns = <48>;
+ gpmc,page-burst-access-ns = <0>;
+ gpmc,access-ns = <42>;
+ gpmc,rd-cycle-ns = <180>;
+ gpmc,wr-cycle-ns = <180>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <12>;
+ };
+};
+
+&mcspi1 {
+ /*
+ * For some reason, touchscreen is necessary for screen to work at
+ * all on real hw. It works well without it on emulator.
+ *
+ * Also... order in the device tree actually matters here.
+ */
+ tsc2005@0 {
+ compatible = "ti,tsc2005";
+ spi-max-frequency = <6000000>;
+ reg = <0>;
+
+ vio-supply = <&vio>;
+
+ reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+ interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
+
+ touchscreen-fuzz-x = <4>;
+ touchscreen-fuzz-y = <7>;
+ touchscreen-fuzz-pressure = <2>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ touchscreen-max-pressure = <2048>;
+
+ ti,x-plate-ohms = <280>;
+ ti,esd-recovery-timeout-ms = <8000>;
+ };
+
+ lcd: acx565akm@2 {
+ compatible = "sony,acx565akm";
+ spi-max-frequency = <6000000>;
+ reg = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&acx565akm_pins>;
+
+ label = "lcd";
+ reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&sdi_out>;
+ };
+ };
+ };
+};
+
+&mcspi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi4_pins>;
+
+ wl1251@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl1251_pins>;
+
+ vio-supply = <&vio>;
+
+ compatible = "ti,wl1251";
+ reg = <0>;
+ spi-max-frequency = <48000000>;
+
+ spi-cpol;
+ spi-cpha;
+
+ ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
+
+ clocks = <&vctcxo>;
+ };
+};
+
+/* RNG not directly accessible on n900, see omap3-rom-rng instead */
+&rng_target {
+ status = "disabled";
+};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <2>;
+ power = <50>;
+};
+
+&uart1 {
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+
+ bcm2048: bluetooth {
+ compatible = "brcm,bcm2048-nokia", "nokia,h4p-bluetooth";
+ reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; /* 91 */
+ host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
+ bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
+ clocks = <&vctcxo>;
+ clock-names = "sysclk";
+ };
+};
+
+&uart3 {
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_sdi_pins>;
+
+ vdds_sdi-supply = <&vaux1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ sdi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ datapairs = <2>;
+ };
+ };
+ };
+};
+
+&venc {
+ status = "okay";
+
+ vdda-supply = <&vdac>;
+
+ port {
+ venc_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ ti,channels = <1>;
+ };
+ };
+};
+
+&mcbsp2 {
+ status = "okay";
+};
+
+&ssi_port1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssi_pins>;
+
+ ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+
+ modem: hsi-client {
+ compatible = "nokia,n900-modem";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&modem_pins>;
+
+ hsi-channel-ids = <0>, <1>, <2>, <3>;
+ hsi-channel-names = "mcsaab-control",
+ "speech-control",
+ "speech-data",
+ "mcsaab-data";
+ hsi-speed-kbps = <55000>;
+ hsi-mode = "frame";
+ hsi-flow = "synchronized";
+ hsi-arb-mode = "round-robin";
+
+ interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
+
+ gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */
+ <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */
+ <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
+ <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
+ <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
+ gpio-names = "cmt_apeslpx",
+ "cmt_rst_rq",
+ "cmt_en",
+ "cmt_rst",
+ "cmt_bsi";
+ };
+};
+
+&ssi_port2 {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/omap3-n950-n9.dtsi b/src/arm/ti/omap/omap3-n950-n9.dtsi
new file mode 100644
index 0000000..aa4fcdb
--- /dev/null
+++ b/src/arm/ti/omap/omap3-n950-n9.dtsi
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+#include "omap36xx.dtsi"
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ vemmc: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VEMMC";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */
+ startup-delay-us = <150>;
+ enable-active-high;
+ };
+
+ vwlan_fixed: fixedregulator2 {
+ compatible = "regulator-fixed";
+ regulator-name = "VWLAN";
+ gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
+ enable-active-high;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ label = "debug::sleep";
+ gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; /* gpio92 */
+ linux,default-trigger = "default-on";
+ pinctrl-names = "default";
+ pinctrl-0 = <&debug_leds>;
+ };
+ };
+
+ /* controlled (enabled/disabled) directly by wl1271 */
+ vctcxo: vctcxo {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ };
+};
+
+&omap3_pmx_core {
+ accelerator_pins: accelerator-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4) /* mcspi2_somi.gpio_180 -> LIS302 INT1 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4) /* mcspi2_cs0.gpio_181 -> LIS302 INT2 */
+ >;
+ };
+
+ debug_leds: debug-led-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4) /* dss_data22.gpio_92 */
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+ >;
+ };
+
+ wlan_pins: wlan-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */
+ OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */
+ >;
+ };
+
+ ssi_pins: ssi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
+ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
+ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
+ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
+ OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
+ >;
+ };
+
+ ssi_pins_idle: ssi-idle-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */
+ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */
+ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */
+ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */
+ OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE7) /* ssi1_wake */
+ >;
+ };
+
+ modem_pins1: modem-core1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4) /* gpio_34 (ape_rst_rq) */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ modem_pins2: modem-core2-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* gpio_23 (cmt_en) */
+ >;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2900000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+/include/ "twl4030.dtsi"
+
+&twl {
+ compatible = "ti,twl5031";
+
+ twl_power: power {
+ compatible = "ti,twl4030-power";
+ ti,use_poweroff;
+ };
+};
+
+&twl_gpio {
+ ti,pullups = <0x000001>; /* BIT(0) */
+ ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
+};
+
+&vdac {
+ regulator-name = "vdac";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&vpll1 {
+ regulator-name = "vpll1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&vpll2 {
+ regulator-name = "vpll2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&vaux1 {
+ regulator-name = "vaux1";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
+/* CSI-2 receiver */
+&vaux2 {
+ regulator-name = "vaux2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+/* Cameras */
+&vaux3 {
+ regulator-name = "vaux3";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
+&vaux4 {
+ regulator-name = "vaux4";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
+&vmmc1 {
+ regulator-name = "vmmc1";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <3150000>;
+};
+
+&vmmc2 {
+ regulator-name = "vmmc2";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+};
+
+&vintana1 {
+ regulator-name = "vintana1";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+};
+
+&vintana2 {
+ regulator-name = "vintana2";
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+};
+
+&vintdig {
+ regulator-name = "vintdig";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+};
+
+&vsim {
+ regulator-name = "vsim";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&vio {
+ regulator-name = "vio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+
+ as3645a@30 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30>;
+ compatible = "ams,as3645a";
+ as3645a_flash: flash@0 {
+ reg = <0x0>;
+ flash-timeout-us = <150000>;
+ flash-max-microamp = <320000>;
+ led-max-microamp = <60000>;
+ ams,input-max-microamp = <1750000>;
+ };
+ as3645a_indicator: indicator@1 {
+ reg = <0x1>;
+ led-max-microamp = <10000>;
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ lis302: lis302@1d {
+ compatible = "st,lis3lv02d";
+ reg = <0x1d>;
+
+ Vdd-supply = <&vaux1>;
+ Vdd_IO-supply = <&vio>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&accelerator_pins>;
+
+ interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */
+
+ /* click flags */
+ st,click-single-x;
+ st,click-single-y;
+ st,click-single-z;
+
+ /* Limits are 0.5g * value */
+ st,click-threshold-x = <8>;
+ st,click-threshold-y = <8>;
+ st,click-threshold-z = <10>;
+
+ /* Click must be longer than time limit */
+ st,click-time-limit = <9>;
+
+ /* Kind of debounce filter */
+ st,click-latency = <50>;
+
+ st,wakeup-x-hi;
+ st,wakeup-y-hi;
+ st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
+
+ st,wakeup2-z-hi;
+ st,wakeup2-threshold = <(1000/18)>; /* millig-value / 18 to get HW values */
+
+ st,highpass-cutoff-hz = <2>;
+
+ /* Interrupt line 1 for thresholds */
+ st,irq1-ff-wu-1;
+ st,irq1-ff-wu-2;
+ /* Interrupt line 2 for click detection */
+ st,irq2-click;
+
+ st,wu-duration-1 = <8>;
+ st,wu-duration-2 = <8>;
+ };
+};
+
+&mmc1 {
+ status = "disabled";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vemmc>;
+ bus-width = <4>;
+ ti,non-removable;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+/* RNG not directly accessible on N950/N9. */
+&rng_target {
+ status = "disabled";
+};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
+
+&gpmc {
+ ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
+
+ onenand@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ti,omap2-onenand";
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
+
+ /*
+ * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
+ * bootloader set values when booted with v4.19 using both N950
+ * and N9 devices (OneNAND Manufacturer: Samsung):
+ *
+ * gpmc cs0 before gpmc_cs_program_settings:
+ * cs0 GPMC_CS_CONFIG1: 0xfd001202
+ * cs0 GPMC_CS_CONFIG2: 0x00181800
+ * cs0 GPMC_CS_CONFIG3: 0x00030300
+ * cs0 GPMC_CS_CONFIG4: 0x18001804
+ * cs0 GPMC_CS_CONFIG5: 0x03171d1d
+ * cs0 GPMC_CS_CONFIG6: 0x97080000
+ */
+ gpmc,sync-read;
+ gpmc,sync-write;
+ gpmc,burst-length = <16>;
+ gpmc,burst-read;
+ gpmc,burst-wrap;
+ gpmc,burst-write;
+ gpmc,device-width = <2>;
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <122>;
+ gpmc,cs-wr-off-ns = <122>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <15>;
+ gpmc,adv-wr-off-ns = <15>;
+ gpmc,oe-on-ns = <20>;
+ gpmc,oe-off-ns = <122>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <122>;
+ gpmc,rd-cycle-ns = <148>;
+ gpmc,wr-cycle-ns = <148>;
+ gpmc,access-ns = <117>;
+ gpmc,page-burst-access-ns = <15>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <10>;
+ gpmc,wr-data-mux-bus-ns = <40>;
+ gpmc,wr-access-ns = <117>;
+
+ gpmc,sync-clk-ps = <15000>; /* TBC; Where this value came? */
+
+ /*
+ * MTD partition table corresponding to Nokia's MeeGo 1.2
+ * Harmattan release.
+ */
+ partition@0 {
+ label = "bootloader";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@1 {
+ label = "config";
+ reg = <0x00100000 0x002c0000>;
+ };
+ partition@2 {
+ label = "kernel";
+ reg = <0x003c0000 0x01000000>;
+ };
+ partition@3 {
+ label = "log";
+ reg = <0x013c0000 0x00200000>;
+ };
+ partition@4 {
+ label = "var";
+ reg = <0x015c0000 0x1ca40000>;
+ };
+ partition@5 {
+ label = "moslo";
+ reg = <0x1e000000 0x02000000>;
+ };
+ partition@6 {
+ label = "omap2-onenand";
+ reg = <0x00000000 0x20000000>;
+ };
+ };
+};
+
+&ssi_port1 {
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&ssi_pins>;
+ pinctrl-1 = <&ssi_pins_idle>;
+
+ ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+
+ modem: hsi-client {
+ pinctrl-names = "default";
+ pinctrl-0 = <&modem_pins1 &modem_pins2>;
+
+ hsi-channel-ids = <0>, <1>, <2>, <3>;
+ hsi-channel-names = "mcsaab-control",
+ "speech-control",
+ "speech-data",
+ "mcsaab-data";
+ hsi-speed-kbps = <96000>;
+ hsi-mode = "frame";
+ hsi-flow = "synchronized";
+ hsi-arb-mode = "round-robin";
+
+ interrupts-extended = <&gpio2 2 IRQ_TYPE_EDGE_RISING>; /* gpio 34 */
+
+ gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>, /* gpio 93 */
+ <&gpio3 24 GPIO_ACTIVE_HIGH>, /* gpio 88 */
+ <&gpio1 23 GPIO_ACTIVE_HIGH>; /* gpio 23 */
+ gpio-names = "cmt_apeslpx",
+ "cmt_rst_rq",
+ "cmt_en";
+ };
+};
+
+&ssi_port2 {
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+
+ bluetooth {
+ compatible = "ti,wl1271-bluetooth-nokia", "nokia,h4p-bluetooth";
+
+ reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; /* 26 */
+ host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
+ bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
+
+ clocks = <&vctcxo>;
+ clock-names = "sysclk";
+ };
+};
+
+&aes1_target {
+ status = "disabled";
+};
+
+&aes2_target {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/omap3-n950.dts b/src/arm/ti/omap/omap3-n950.dts
new file mode 100644
index 0000000..b99f978
--- /dev/null
+++ b/src/arm/ti/omap/omap3-n950.dts
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * omap3-n950.dts - Device Tree file for Nokia N950
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+/dts-v1/;
+
+#include "omap3-n950-n9.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Nokia N950";
+ compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap3";
+
+ keys {
+ compatible = "gpio-keys";
+
+ keypad_slide {
+ label = "Keypad Slide";
+ gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* 109 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_KEYPAD_SLIDE>;
+ wakeup-source;
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_slide_pins>;
+ };
+ };
+};
+
+&omap3_pmx_core {
+ keypad_slide_pins: debug-led-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */
+ >;
+ };
+};
+
+&omap3_pmx_core {
+ spi4_pins: spi4-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
+ OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
+ >;
+ };
+};
+
+&omap3_pmx_core {
+ dsi_pins: dsi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE1) /* dsi_dx0 - data0+ */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE1) /* dsi_dy0 - data0- */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE1) /* dsi_dx1 - clk+ */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE1) /* dsi_dy1 - clk- */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE1) /* dsi_dx2 - data1+ */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE1) /* dsi_dy2 - data1- */
+ >;
+ };
+
+ display_pins: display-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20ca, PIN_INPUT | MUX_MODE4) /* gpio 62 - display te */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 - display reset */
+ >;
+ };
+};
+
+&i2c2 {
+ smia_1: camera@10 {
+ compatible = "nokia,smia";
+ reg = <0x10>;
+ /* No reset gpio */
+ vana-supply = <&vaux3>;
+ clocks = <&isp 0>;
+ clock-frequency = <9600000>;
+ flash-leds = <&as3645a_flash &as3645a_indicator>;
+ port {
+ smia_1_1: endpoint {
+ link-frequencies = /bits/ 64 <210000000 333600000 398400000>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi2a_ep>;
+ };
+ };
+ };
+};
+
+&isp {
+ vdd-csiphy1-supply = <&vaux2>;
+ vdd-csiphy2-supply = <&vaux2>;
+ ports {
+ port@2 {
+ reg = <2>;
+ csi2a_ep: endpoint {
+ remote-endpoint = <&smia_1_1>;
+ clock-lanes = <2>;
+ data-lanes = <3 1>;
+ crc = <1>;
+ lane-polarities = <1 1 1>;
+ };
+ };
+ };
+};
+
+&mcspi4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi4_pins>;
+
+ wlcore: wlcore@0 {
+ compatible = "ti,wl1271";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_pins>;
+ reg = <0>;
+ spi-max-frequency = <48000000>;
+ clock-xtal;
+ ref-clock-frequency = <38400000>;
+ interrupts-extended = <&gpio2 10 IRQ_TYPE_LEVEL_HIGH>; /* gpio 42 */
+ vwlan-supply = <&vwlan_fixed>;
+ };
+};
+
+&modem {
+ compatible = "nokia,n950-modem";
+};
+
+&twl {
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ ti,enable-vibra = <1>;
+ };
+};
+
+&twl_keypad {
+ linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_BACKSLASH)
+ MATRIX_KEY(0x01, 0x00, KEY_LEFTSHIFT)
+ MATRIX_KEY(0x02, 0x00, KEY_COMPOSE)
+ MATRIX_KEY(0x03, 0x00, KEY_LEFTMETA)
+ MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
+ MATRIX_KEY(0x05, 0x00, KEY_BACKSPACE)
+ MATRIX_KEY(0x06, 0x00, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x07, 0x00, KEY_VOLUMEUP)
+
+ MATRIX_KEY(0x03, 0x01, KEY_Z)
+ MATRIX_KEY(0x04, 0x01, KEY_A)
+ MATRIX_KEY(0x05, 0x01, KEY_Q)
+ MATRIX_KEY(0x06, 0x01, KEY_W)
+ MATRIX_KEY(0x07, 0x01, KEY_E)
+
+ MATRIX_KEY(0x03, 0x02, KEY_X)
+ MATRIX_KEY(0x04, 0x02, KEY_S)
+ MATRIX_KEY(0x05, 0x02, KEY_D)
+ MATRIX_KEY(0x06, 0x02, KEY_C)
+ MATRIX_KEY(0x07, 0x02, KEY_V)
+
+ MATRIX_KEY(0x03, 0x03, KEY_O)
+ MATRIX_KEY(0x04, 0x03, KEY_I)
+ MATRIX_KEY(0x05, 0x03, KEY_U)
+ MATRIX_KEY(0x06, 0x03, KEY_L)
+ MATRIX_KEY(0x07, 0x03, KEY_APOSTROPHE)
+
+ MATRIX_KEY(0x03, 0x04, KEY_Y)
+ MATRIX_KEY(0x04, 0x04, KEY_K)
+ MATRIX_KEY(0x05, 0x04, KEY_J)
+ MATRIX_KEY(0x06, 0x04, KEY_H)
+ MATRIX_KEY(0x07, 0x04, KEY_G)
+
+ MATRIX_KEY(0x03, 0x05, KEY_B)
+ MATRIX_KEY(0x04, 0x05, KEY_COMMA)
+ MATRIX_KEY(0x05, 0x05, KEY_M)
+ MATRIX_KEY(0x06, 0x05, KEY_N)
+ MATRIX_KEY(0x07, 0x05, KEY_DOT)
+
+ MATRIX_KEY(0x00, 0x06, KEY_SPACE)
+ MATRIX_KEY(0x03, 0x06, KEY_T)
+ MATRIX_KEY(0x04, 0x06, KEY_UP)
+ MATRIX_KEY(0x05, 0x06, KEY_LEFT)
+ MATRIX_KEY(0x06, 0x06, KEY_RIGHT)
+ MATRIX_KEY(0x07, 0x06, KEY_DOWN)
+
+ MATRIX_KEY(0x03, 0x07, KEY_P)
+ MATRIX_KEY(0x04, 0x07, KEY_ENTER)
+ MATRIX_KEY(0x05, 0x07, KEY_SLASH)
+ MATRIX_KEY(0x06, 0x07, KEY_F)
+ MATRIX_KEY(0x07, 0x07, KEY_R)
+ >;
+};
+
+&lis302 {
+ st,axis-x = <(-2)>; /* LIS3_INV_DEV_Y */
+ st,axis-y = <(-1)>; /* LIS3_INV_DEV_X */
+ st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
+
+ st,min-limit-x = <(-32)>;
+ st,min-limit-y = <3>;
+ st,min-limit-z = <3>;
+
+ st,max-limit-x = <(-3)>;
+ st,max-limit-y = <32>;
+ st,max-limit-z = <32>;
+};
+
+&dss {
+ status = "okay";
+
+ vdda_video-supply = <&vdac>;
+};
+
+&dsi {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dsi_pins>;
+
+ vdd-supply = <&vpll2>;
+
+ port {
+ dsi_out_ep: endpoint {
+ remote-endpoint = <&lcd0_in>;
+ lanes = <2 3 0 1 4 5>;
+ };
+ };
+
+ lcd0: panel@0 {
+ compatible = "nokia,himalaya", "panel-dsi-cm";
+ reg = <0>;
+ label = "lcd0";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&display_pins>;
+
+ vpnl-supply = <&vmmc2>;
+ vddi-supply = <&vio>;
+
+ reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
+ te-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; /* 62 */
+
+ width-mm = <49>; /* 48.960 mm */
+ height-mm = <88>; /* 88.128 mm */
+
+ /* TODO:
+ * - panel is upside-down
+ * - top + bottom 5px are not visible
+ */
+ panel-timing {
+ clock-frequency = <0>; /* Calculated by dsi */
+
+ hback-porch = <2>;
+ hactive = <480>;
+ hfront-porch = <0>;
+ hsync-len = <2>;
+
+ vback-porch = <1>;
+ vactive = <864>;
+ vfront-porch = <0>;
+ vsync-len = <1>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ lcd0_in: endpoint {
+ remote-endpoint = <&dsi_out_ep>;
+ };
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap3-overo-alto35-common.dtsi b/src/arm/ti/omap/omap3-overo-alto35-common.dtsi
new file mode 100644
index 0000000..7f1671b
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-alto35-common.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd35.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+ led-gpio148 {
+ label = "overo:red:gpio148";
+ gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>; /* gpio 148 */
+ };
+ led-gpio150 {
+ label = "overo:yellow:gpio150";
+ gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio 150 */
+ };
+ led-gpio151 {
+ label = "overo:blue:gpio151";
+ gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* gpio 151 */
+ };
+ led-gpio170 {
+ label = "overo:green:gpio170";
+ gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* gpio 170 */
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+ button0 {
+ label = "button0";
+ linux,code = <BTN_0>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio_10 */
+ wakeup-source;
+ };
+ };
+};
+
+&omap3_pmx_core {
+ led_pins: led-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE4) /* uart1_tx.gpio_148 */
+ OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_OUTPUT | MUX_MODE4) /* uart1_rx.gpio_151 */
+ OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
+ >;
+ };
+};
+
+&omap3_pmx_wkup {
+ button_pins: button-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a18, PIN_INPUT | MUX_MODE4) /* sys_clkout1.gpio_10 */
+ >;
+ };
+};
+
+&usbhshost {
+ status = "disabled";
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-alto35.dts b/src/arm/ti/omap/omap3-overo-alto35.dts
new file mode 100644
index 0000000..37c64dd
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-alto35.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-alto35-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Alto35";
+ compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-base.dtsi b/src/arm/ti/omap/omap3-overo-base.dtsi
new file mode 100644
index 0000000..cc57626
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-base.dtsi
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * The Gumstix Overo must be combined with an expansion board.
+ */
+
+/ {
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0>;
+ };
+
+ led-controller {
+ compatible = "pwm-leds";
+
+ led-1 {
+ label = "overo:blue:COM";
+ pwms = <&twl_pwmled 1 7812500>;
+ max-brightness = <127>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "overo";
+
+ ti,mcbsp = <&mcbsp2>;
+ };
+
+ /* HS USB Port 2 Power */
+ hsusb2_power: hsusb2_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>; /* gpio_168: vbus enable */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2-phy-pins {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; /* gpio_183 */
+ vcc-supply = <&hsusb2_power>;
+ #phy-cells = <0>;
+ };
+
+ /* Regulator to trigger the nPoweron signal of the Wifi module */
+ w3cbw003c_npoweron: regulator-w3cbw003c-npoweron {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-w3cbw003c-npoweron";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54: nPoweron */
+ enable-active-high;
+ };
+
+ /* Regulator to trigger the nReset signal of the Wifi module */
+ w3cbw003c_wifi_nreset: regulator-w3cbw003c-wifi-nreset {
+ pinctrl-names = "default";
+ pinctrl-0 = <&w3cbw003c_pins &w3cbw003c_2_pins>;
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-w3cbw003c-wifi-nreset";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* gpio_16: WiFi nReset */
+ startup-delay-us = <10000>;
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_pins
+ >;
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_dr.uart2_rts */
+ OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clk.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ >;
+ };
+
+ /* WiFi/BT combo */
+ w3cbw003c_pins: w3cbw003c-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
+ OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */
+ >;
+ };
+
+ hsusb2_pins: hsusb2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
+ OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
+ OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4) /* i2c2_scl.gpio_168 */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_OUTPUT | MUX_MODE4) /* i2c2_sda.gpio_183 */
+ >;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+/* i2c2 pins are used for gpio */
+&i2c2 {
+ status = "disabled";
+};
+
+/* on board microSD slot */
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+};
+
+/* optional on board WiFi */
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&w3cbw003c_npoweron>;
+ vqmmc-supply = <&w3cbw003c_wifi_nreset>;
+ bus-width = <4>;
+ cap-sdio-irq;
+ non-removable;
+};
+
+&twl_gpio {
+ ti,use-leds;
+};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
+
+&usbhshost {
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&mcbsp2 {
+ status = "okay";
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>, /* CS0 */
+ <4 0 0x2b000000 0x1000000>, /* CS4 */
+ <5 0 0x2c000000 0x1000000>; /* CS5 */
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ linux,mtd-name = "micron,mt29c4g96maz";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ ti,nand-ecc-opt = "bch8";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SPL";
+ reg = <0 0x80000>; /* 512KiB */
+ };
+ partition@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1C0000>; /* 1792KiB */
+ };
+ partition@1c0000 {
+ label = "Environment";
+ reg = <0x240000 0x40000>; /* 256KiB */
+ };
+ partition@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x800000>; /* 8192KiB */
+ };
+ partition@780000 {
+ label = "Filesystem";
+ reg = <0xA80000 0>;
+ /* HACK: MTDPART_SIZ_FULL=0 so fill to end */
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap3-overo-chestnut43-common.dtsi b/src/arm/ti/omap/omap3-overo-chestnut43-common.dtsi
new file mode 100644
index 0000000..0d0e62c
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-chestnut43-common.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+ led-heartbeat {
+ label = "overo:red:gpio21";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
+ linux,default-trigger = "heartbeat";
+ };
+ led-gpio22 {
+ label = "overo:blue:gpio22";
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button0 {
+ label = "button0";
+ linux,code = <BTN_0>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
+ wakeup-source;
+ };
+ button1 {
+ label = "button1";
+ linux,code = <BTN_1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
+ wakeup-source;
+ };
+ };
+};
+
+#include "omap-gpmc-smsc9221.dtsi"
+
+&gpmc {
+ ethernet@gpmc {
+ reg = <5 0 0xff>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */
+ };
+};
+
+&lis33de {
+ status = "disabled";
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-chestnut43.dts b/src/arm/ti/omap/omap3-overo-chestnut43.dts
new file mode 100644
index 0000000..bb53c76
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-chestnut43.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-chestnut43-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Chestnut43";
+ compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: led-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
+ >;
+ };
+
+ button_pins: button-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
+ OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
+ >;
+ };
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-common-dvi.dtsi b/src/arm/ti/omap/omap3-overo-common-dvi.dtsi
new file mode 100644
index 0000000..b1a800f
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-common-dvi.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * DVI output for some Gumstix Overo boards (Tobi and Summit)
+ */
+
+&omap3_pmx_core {
+ dss_dpi_pins: dss-dpi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+ regulator-always-on;
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+/ {
+ aliases {
+ display0 = &dvi0;
+ };
+
+ tfp410: encoder {
+ compatible = "ti,tfp410";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ digital;
+ ddc-i2c-bus = <&i2c3>;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-common-lcd35.dtsi b/src/arm/ti/omap/omap3-overo-common-lcd35.dtsi
new file mode 100644
index 0000000..0da561a
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-common-lcd35.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
+ */
+
+&omap3_pmx_core {
+ dss_dpi_pins: dss-dpi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ lb035_pins: lb035-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4) /* uart2_cts.gpio_144 */
+ >;
+ };
+
+ backlight_pins: backlight-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4) /* uart2_rts.gpio_145 */
+ >;
+ };
+
+ mcspi1_pins: mcspi1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
+ OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
+ OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+ OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
+ OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT | MUX_MODE0) /* mcspi1_cs1.mcspi1_cs1 */
+ >;
+ };
+
+ ads7846_pins: ads7846-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4) /* csi2_dx1.gpio_114 */
+ >;
+ };
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+ regulator-always-on;
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+/ {
+ aliases {
+ display0 = &lcd0;
+ };
+
+ ads7846reg: ads7846-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "ads7846-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ backlight {
+ compatible = "gpio-backlight";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+ gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; /* gpio_145 */
+
+ default-on;
+ };
+};
+
+&mcspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi1_pins>;
+
+ lcd0: display@1 {
+ compatible = "lgphilips,lb035q02";
+ label = "lcd35";
+
+ reg = <1>; /* CS1 */
+ spi-max-frequency = <500000>;
+ spi-cpol;
+ spi-cpha;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lb035_pins>;
+ enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
+ /* touch controller */
+ ads7846@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ads7846_pins>;
+
+ compatible = "ti,ads7846";
+ vcc-supply = <&ads7846reg>;
+
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <1500000>;
+
+ interrupt-parent = <&gpio4>;
+ interrupts = <18 0>; /* gpio_114 */
+ pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
+
+ ti,x-min = /bits/ 16 <0x0>;
+ ti,x-max = /bits/ 16 <0x0fff>;
+ ti,y-min = /bits/ 16 <0x0>;
+ ti,y-max = /bits/ 16 <0x0fff>;
+ ti,x-plate-ohms = /bits/ 16 <180>;
+ ti,pressure-max = /bits/ 16 <255>;
+
+ wakeup-source;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-overo-common-lcd43.dtsi b/src/arm/ti/omap/omap3-overo-common-lcd43.dtsi
new file mode 100644
index 0000000..981f02f
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-common-lcd43.dtsi
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
+ */
+
+&omap3_pmx_core {
+ dss_dpi_pins: dss-dpi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ lte430_pins: lte430-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4) /* uart2_cts.gpio_144 */
+ >;
+ };
+
+ backlight_pins: backlight-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4) /* uart2_rts.gpio_145 */
+ >;
+ };
+
+ mcspi1_pins: mcspi1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
+ OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
+ OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+ OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
+ >;
+ };
+
+ ads7846_pins: ads7846-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4) /* csi2_dx1.gpio_114 */
+ >;
+ };
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+ regulator-always-on;
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+/ {
+ aliases {
+ display0 = &lcd0;
+ };
+
+ lcd0: display {
+ compatible = "samsung,lte430wq-f0c", "panel-dpi";
+ label = "lcd43";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <<e430_pins>;
+ enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <9200000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <8>;
+ hback-porch = <4>;
+ hsync-len = <41>;
+ vback-porch = <2>;
+ vfront-porch = <4>;
+ vsync-len = <10>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+ ads7846reg: ads7846-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "ads7846-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ backlight {
+ compatible = "gpio-backlight";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+ gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; /* gpio_145 */
+
+ default-on;
+ };
+};
+
+&mcspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi1_pins>;
+
+ /* touch controller */
+ ads7846@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ads7846_pins>;
+
+ compatible = "ti,ads7846";
+ vcc-supply = <&ads7846reg>;
+
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <1500000>;
+
+ interrupt-parent = <&gpio4>;
+ interrupts = <18 0>; /* gpio_114 */
+ pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
+
+ ti,x-min = /bits/ 16 <0x0>;
+ ti,x-max = /bits/ 16 <0x0fff>;
+ ti,y-min = /bits/ 16 <0x0>;
+ ti,y-max = /bits/ 16 <0x0fff>;
+ ti,x-plate-ohms = /bits/ 16 <180>;
+ ti,pressure-max = /bits/ 16 <255>;
+
+ wakeup-source;
+ };
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-common-peripherals.dtsi b/src/arm/ti/omap/omap3-overo-common-peripherals.dtsi
new file mode 100644
index 0000000..00369f6
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-common-peripherals.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Peripherals common to all Gumstix Overo boards (Tobi, Summit, Palo43,...)
+ */
+
+/ {
+ lis33_3v3: lis33-3v3-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "lis33-3v3-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ lis33_1v8: lis33-1v8-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "lis33-1v8-reg";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+&omap3_pmx_core {
+ i2c3_pins: i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ clock-frequency = <100000>;
+
+ /* optional 1K EEPROM with revision information */
+ eeprom@51 {
+ compatible = "atmel,24c01";
+ reg = <0x51>;
+ pagesize = <8>;
+ };
+
+ lis33de: lis33de@1d {
+ compatible = "st,lis33de", "st,lis3lv02d";
+ reg = <0x1d>;
+ Vdd-supply = <&lis33_1v8>;
+ Vdd_IO-supply = <&lis33_3v3>;
+
+ st,click-single-x;
+ st,click-single-y;
+ st,click-single-z;
+ st,click-thresh-x = <10>;
+ st,click-thresh-y = <10>;
+ st,click-thresh-z = <10>;
+ st,irq1-click;
+ st,irq2-click;
+ st,wakeup-x-lo;
+ st,wakeup-x-hi;
+ st,wakeup-y-lo;
+ st,wakeup-y-hi;
+ st,wakeup-z-lo;
+ st,wakeup-z-hi;
+ st,min-limit-x = <120>;
+ st,min-limit-y = <120>;
+ st,min-limit-z = <140>;
+ st,max-limit-x = <550>;
+ st,max-limit-y = <550>;
+ st,max-limit-z = <750>;
+ };
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&uart3 {
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-gallop43-common.dtsi b/src/arm/ti/omap/omap3-overo-gallop43-common.dtsi
new file mode 100644
index 0000000..5f67213
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-gallop43-common.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+ led-heartbeat {
+ label = "overo:red:gpio21";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
+ linux,default-trigger = "heartbeat";
+ };
+ led-gpio22 {
+ label = "overo:blue:gpio22";
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button0 {
+ label = "button0";
+ linux,code = <BTN_0>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
+ wakeup-source;
+ };
+ button1 {
+ label = "button1";
+ linux,code = <BTN_1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
+ wakeup-source;
+ };
+ };
+};
+
+&usbhshost {
+ status = "disabled";
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-gallop43.dts b/src/arm/ti/omap/omap3-overo-gallop43.dts
new file mode 100644
index 0000000..d882a58
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-gallop43.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-gallop43-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Gallop43";
+ compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: led-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
+ >;
+ };
+
+ button_pins: button-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
+ OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
+ >;
+ };
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-palo35-common.dtsi b/src/arm/ti/omap/omap3-overo-palo35-common.dtsi
new file mode 100644
index 0000000..4b66f62
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-palo35-common.dtsi
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix Inc.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd35.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+ led-heartbeat {
+ label = "overo:red:gpio21";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
+ linux,default-trigger = "heartbeat";
+ };
+ led-gpio22 {
+ label = "overo:blue:gpio22";
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button0 {
+ label = "button0";
+ linux,code = <BTN_0>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
+ wakeup-source;
+ };
+ button1 {
+ label = "button1";
+ linux,code = <BTN_1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
+ wakeup-source;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap3-overo-palo35.dts b/src/arm/ti/omap/omap3-overo-palo35.dts
new file mode 100644
index 0000000..39c8e9c
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-palo35.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix Inc.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-palo35-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Palo35";
+ compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: led-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
+ >;
+ };
+
+ button_pins: button-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
+ OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-overo-palo43-common.dtsi b/src/arm/ti/omap/omap3-overo-palo43-common.dtsi
new file mode 100644
index 0000000..a8f163a8
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-palo43-common.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+ led-heartbeat {
+ label = "overo:red:gpio21";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
+ linux,default-trigger = "heartbeat";
+ };
+ led-gpio22 {
+ label = "overo:blue:gpio22";
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button0 {
+ label = "button0";
+ linux,code = <BTN_0>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
+ wakeup-source;
+ };
+ button1 {
+ label = "button1";
+ linux,code = <BTN_1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
+ wakeup-source;
+ };
+ };
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-palo43.dts b/src/arm/ti/omap/omap3-overo-palo43.dts
new file mode 100644
index 0000000..2c0f755
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-palo43.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-palo43-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Palo43";
+ compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: led-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
+ >;
+ };
+
+ button_pins: button-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
+ OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
+ >;
+ };
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-storm-alto35.dts b/src/arm/ti/omap/omap3-overo-storm-alto35.dts
new file mode 100644
index 0000000..3eb935d
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-storm-alto35.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-alto35-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35";
+ compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
+};
diff --git a/src/arm/ti/omap/omap3-overo-storm-chestnut43.dts b/src/arm/ti/omap/omap3-overo-storm-chestnut43.dts
new file mode 100644
index 0000000..25e82ef
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-storm-chestnut43.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-chestnut43-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43";
+ compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: led-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
+ >;
+ };
+
+ button_pins: button-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
+ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
+ >;
+ };
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-storm-gallop43.dts b/src/arm/ti/omap/omap3-overo-storm-gallop43.dts
new file mode 100644
index 0000000..0c93ea3
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-storm-gallop43.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-gallop43-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43";
+ compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: led-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
+ >;
+ };
+
+ button_pins: button-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
+ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
+ >;
+ };
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-storm-palo35.dts b/src/arm/ti/omap/omap3-overo-storm-palo35.dts
new file mode 100644
index 0000000..9468ef9
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-storm-palo35.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-palo35-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35";
+ compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: led-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
+ >;
+ };
+
+ button_pins: button-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
+ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-overo-storm-palo43.dts b/src/arm/ti/omap/omap3-overo-storm-palo43.dts
new file mode 100644
index 0000000..9feead5
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-storm-palo43.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-palo43-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43";
+ compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: led-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
+ >;
+ };
+
+ button_pins: button-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
+ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
+ >;
+ };
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-storm-summit.dts b/src/arm/ti/omap/omap3-overo-storm-summit.dts
new file mode 100644
index 0000000..92f56b9
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-storm-summit.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-summit-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit";
+ compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: led-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ >;
+ };
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-storm-tobi.dts b/src/arm/ti/omap/omap3-overo-storm-tobi.dts
new file mode 100644
index 0000000..6d14466
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-storm-tobi.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
+ compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-storm-tobiduo.dts b/src/arm/ti/omap/omap3-overo-storm-tobiduo.dts
new file mode 100644
index 0000000..bcf20ff
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-storm-tobiduo.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-tobiduo-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo";
+ compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
+};
diff --git a/src/arm/ti/omap/omap3-overo-storm.dtsi b/src/arm/ti/omap/omap3-overo-storm.dtsi
new file mode 100644
index 0000000..da583b4
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-storm.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+#include "omap36xx.dtsi"
+#include "omap3-overo-base.dtsi"
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_2_pins
+ >;
+
+ hsusb2_2_pins: hsusb2-2-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+
+ w3cbw003c_2_pins: w3cbw003c-2-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
+ >;
+ };
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-summit-common.dtsi b/src/arm/ti/omap/omap3-overo-summit-common.dtsi
new file mode 100644
index 0000000..ec03ca1
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-summit-common.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-dvi.dtsi"
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+ led-heartbeat {
+ label = "overo:red:gpio21";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&lis33de {
+ status = "disabled";
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-summit.dts b/src/arm/ti/omap/omap3-overo-summit.dts
new file mode 100644
index 0000000..da5ca80
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-summit.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-summit-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Summit";
+ compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: led-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ >;
+ };
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-tobi-common.dtsi b/src/arm/ti/omap/omap3-overo-tobi-common.dtsi
new file mode 100644
index 0000000..5432e4e
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-tobi-common.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-dvi.dtsi"
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ led-heartbeat {
+ label = "overo:red:gpio21";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+#include "omap-gpmc-smsc9221.dtsi"
+
+&gpmc {
+ ethernet@gpmc {
+ reg = <5 0 0xff>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */
+ };
+};
+
+&lis33de {
+ status = "disabled";
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-tobi.dts b/src/arm/ti/omap/omap3-overo-tobi.dts
new file mode 100644
index 0000000..ce3f240
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-tobi.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Tobi";
+ compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
diff --git a/src/arm/ti/omap/omap3-overo-tobiduo-common.dtsi b/src/arm/ti/omap/omap3-overo-tobiduo-common.dtsi
new file mode 100644
index 0000000..218a10c
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-tobiduo-common.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+
+#include "omap-gpmc-smsc9221.dtsi"
+
+&gpmc {
+ smsc1: ethernet@gpmc {
+ reg = <5 0 0xff>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */
+ };
+
+ smsc2: ethernet@4,0 {
+ compatible = "smsc,lan9221","smsc,lan9115";
+ bank-width = <2>;
+
+ gpmc,mux-add-data = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <42>;
+ gpmc,cs-wr-off-ns = <36>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <12>;
+ gpmc,adv-wr-off-ns = <12>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <42>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <36>;
+ gpmc,rd-cycle-ns = <60>;
+ gpmc,wr-cycle-ns = <54>;
+ gpmc,access-ns = <36>;
+ gpmc,page-burst-access-ns = <0>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <18>;
+ gpmc,wr-access-ns = <42>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+ vddvario-supply = <&vddvario>;
+ vdd33a-supply = <&vdd33a>;
+ reg-io-width = <4>;
+ smsc,save-mac-address;
+
+ reg = <4 0 0xff>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* GPIO 65 */
+ };
+};
+
+&lis33de {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/omap3-overo-tobiduo.dts b/src/arm/ti/omap/omap3-overo-tobiduo.dts
new file mode 100644
index 0000000..fc6163e
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo-tobiduo.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-tobiduo-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on TobiDuo";
+ compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
diff --git a/src/arm/ti/omap/omap3-overo.dtsi b/src/arm/ti/omap/omap3-overo.dtsi
new file mode 100644
index 0000000..7dc044e
--- /dev/null
+++ b/src/arm/ti/omap/omap3-overo.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+#include "omap34xx.dtsi"
+#include "omap3-overo-base.dtsi"
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_2_pins
+ >;
+
+ hsusb2_2_pins: hsusb2-2-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+
+ w3cbw003c_2_pins: w3cbw003c-2-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-pandora-1ghz.dts b/src/arm/ti/omap/omap3-pandora-1ghz.dts
new file mode 100644
index 0000000..8d8c908
--- /dev/null
+++ b/src/arm/ti/omap/omap3-pandora-1ghz.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015
+ * Nikolaus Schaller <hns@goldelico.com>
+ */
+
+/*
+ * device tree for OpenPandora 1GHz with DM3730
+ */
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-pandora-common.dtsi"
+
+/ {
+ model = "Pandora Handheld Console 1GHz";
+
+ compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_2_pins
+ &control_pins
+ >;
+
+ hsusb2_2_pins: hsusb2-2-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+
+ mmc3_pins: mmc3-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
+ OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
+ OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
+ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
+ OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+ OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
+ >;
+ };
+
+ control_pins: control-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* etk_d0.gpio_14 = HP_SHUTDOWN */
+ OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4) /* etk_d1.gpio_15 = BT_SHUTDOWN */
+ OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 = RESET_USB_HOST */
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE4) /* etk_d7.gpio_21 = WIFI IRQ */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 = MSECURE */
+ OMAP3630_CORE2_IOPAD(0x25ee, PIN_OUTPUT | MUX_MODE4) /* etk_d9.gpio_23 = WIFI_POWER */
+ OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT | MUX_MODE4) /* reserved.gpio_127 = MMC2_WP */
+ OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 = MMC1_WP */
+ OMAP3_WKUP_IOPAD(0x2a58, PIN_OUTPUT | MUX_MODE4) /* reserved.gpio_128 = LED_MMC1 */
+ OMAP3_WKUP_IOPAD(0x2a5a, PIN_OUTPUT | MUX_MODE4) /* reserved.gpio_129 = LED_MMC2 */
+
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-pandora-600mhz.dts b/src/arm/ti/omap/omap3-pandora-600mhz.dts
new file mode 100644
index 0000000..2d5eac3
--- /dev/null
+++ b/src/arm/ti/omap/omap3-pandora-600mhz.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015
+ * Nikolaus Schaller <hns@goldelico.com>
+ */
+
+/*
+ * device tree for OpenPandora with OMAP3530
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-pandora-common.dtsi"
+
+/ {
+ model = "Pandora Handheld Console";
+
+ compatible = "openpandora,omap3-pandora-600mhz", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_2_pins
+ &control_pins
+ >;
+
+ hsusb2_2_pins: hsusb2-2-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+
+ mmc3_pins: mmc3-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
+ OMAP3430_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
+ OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
+ OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
+ OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+ OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
+ >;
+ };
+
+ control_pins: control-pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* etk_d0.gpio_14 = HP_SHUTDOWN */
+ OMAP3430_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4) /* etk_d1.gpio_15 = BT_SHUTDOWN */
+ OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 = RESET_USB_HOST */
+ OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE4) /* etk_d7.gpio_21 = WIFI IRQ */
+ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 = MSECURE */
+ OMAP3430_CORE2_IOPAD(0x25ee, PIN_OUTPUT | MUX_MODE4) /* etk_d9.gpio_23 = WIFI_POWER */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-pandora-common.dtsi b/src/arm/ti/omap/omap3-pandora-common.dtsi
new file mode 100644
index 0000000..06c5b23
--- /dev/null
+++ b/src/arm/ti/omap/omap3-pandora-common.dtsi
@@ -0,0 +1,730 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015
+ * Nikolaus Schaller <hns@goldelico.com>
+ *
+ * Common device tree include for OpenPandora devices.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ aliases {
+ display0 = &lcd;
+ };
+
+ /* fixed 26MHz oscillator */
+ hfclk_26m: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+
+ tv: connector {
+ compatible = "connector-analog-tv";
+ label = "tv";
+
+ port {
+ tv_connector_in: endpoint {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+ };
+
+ gpio-leds {
+
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led1 {
+ label = "pandora::sd1";
+ gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led2 {
+ label = "pandora::sd2";
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ led3 {
+ label = "pandora::bluetooth";
+ gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led4 {
+ label = "pandora::wifi";
+ gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */
+ linux,default-trigger = "mmc2";
+ default-state = "off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+
+ up-button {
+ label = "up";
+ linux,code = <KEY_UP>;
+ gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* GPIO_110 */
+ wakeup-source;
+ };
+
+ down-button {
+ label = "down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* GPIO_103 */
+ wakeup-source;
+ };
+
+ left-button {
+ label = "left";
+ linux,code = <KEY_LEFT>;
+ gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; /* GPIO_96 */
+ wakeup-source;
+ };
+
+ right-button {
+ label = "right";
+ linux,code = <KEY_RIGHT>;
+ gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; /* GPIO_98 */
+ wakeup-source;
+ };
+
+ pageup-button {
+ label = "game 1";
+ linux,code = <KEY_PAGEUP>;
+ gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* GPIO_109 */
+ wakeup-source;
+ };
+
+ pagedown-button {
+ label = "game 3";
+ linux,code = <KEY_PAGEDOWN>;
+ gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* GPIO_106 */
+ wakeup-source;
+ };
+
+ home-button {
+ label = "game 4";
+ linux,code = <KEY_HOME>;
+ gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* GPIO_101 */
+ wakeup-source;
+ };
+
+ end-button {
+ label = "game 2";
+ linux,code = <KEY_END>;
+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* GPIO_111 */
+ wakeup-source;
+ };
+
+ right-shift {
+ label = "l";
+ linux,code = <KEY_RIGHTSHIFT>;
+ gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* GPIO_102 */
+ wakeup-source;
+ };
+
+ kp-plus {
+ label = "l2";
+ linux,code = <KEY_KPPLUS>;
+ gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* GPIO_97 */
+ wakeup-source;
+ };
+
+ right-ctrl {
+ label = "r";
+ linux,code = <KEY_RIGHTCTRL>;
+ gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* GPIO_105 */
+ wakeup-source;
+ };
+
+ kp-minus {
+ label = "r2";
+ linux,code = <KEY_KPMINUS>;
+ gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* GPIO_107 */
+ wakeup-source;
+ };
+
+ left-ctrl {
+ label = "ctrl";
+ linux,code = <KEY_LEFTCTRL>;
+ gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* GPIO_104 */
+ wakeup-source;
+ };
+
+ menu {
+ label = "menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; /* GPIO_99 */
+ wakeup-source;
+ };
+
+ hold {
+ label = "hold";
+ linux,code = <KEY_COFFEE>;
+ gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* GPIO_176 */
+ wakeup-source;
+ };
+
+ left-alt {
+ label = "alt";
+ linux,code = <KEY_LEFTALT>;
+ gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */
+ wakeup-source;
+ };
+
+ lid {
+ label = "lid";
+ linux,code = <0x00>; /* SW_LID lid shut */
+ linux,input-type = <0x05>; /* EV_SW */
+ gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; /* GPIO_108 */
+ };
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2-phy-pins {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */
+ vcc-supply = <&vaux2>;
+ #phy-cells = <0>;
+ };
+
+ /* HS USB Host VBUS supply
+ * disabling this regulator causes current leakage, and LCD flicker
+ * on earlier (CC) board revisions, so keep it always on */
+ usb_host_5v: fixed-regulator-usb_host_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_host_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */
+ };
+
+ /* wl1251 wifi+bt module */
+ wlan_en: fixed-regulator-wg7210_en {
+ compatible = "regulator-fixed";
+ regulator-name = "vwlan";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <50000>;
+ enable-active-high;
+ gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* wg7210 (wifi+bt module) 32k clock buffer */
+ wg7210_32k: fixed-regulator-wg7210_32k {
+ compatible = "regulator-fixed";
+ regulator-name = "wg7210_32k";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ enable-active-high;
+ gpio = <&twl_gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&omap3_pmx_core {
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dirdat0 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dirdat1 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dircmd */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */
+ >;
+ };
+
+ dss_dpi_pins: dss-dpi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* GPIO_157 = lcd reset */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ led_pins: leds-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4) /* GPIO_128 */
+ OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* GPIO_129 */
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4) /* GPIO_158 */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4) /* GPIO_159 */
+ >;
+ };
+
+ button_pins: button-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4) /* GPIO_96 */
+ OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4) /* GPIO_97 */
+ OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4) /* GPIO_98 */
+ OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE4) /* GPIO_99 */
+ OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE4) /* GPIO_100 */
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* GPIO_101 */
+ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* GPIO_102 */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* GPIO_103 */
+ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* GPIO_104 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* GPIO_105 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* GPIO_106 */
+ OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* GPIO_107 */
+ OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* GPIO_108 */
+ OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* GPIO_109 */
+ OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT | MUX_MODE4) /* GPIO_110 */
+ OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4) /* GPIO_111 */
+ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* GPIO_176 */
+ >;
+ };
+
+ penirq_pins: penirq-pins {
+ pinctrl-single,pins = <
+ /* here we could enable to wakeup the cpu from suspend by a pen touch */
+ OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4) /* GPIO_94 */
+ >;
+ };
+
+};
+
+&omap3_pmx_core2 {
+ /* define in CPU specific file that includes this one
+ * use either OMAP3430_CORE2_IOPAD() or OMAP3630_CORE2_IOPAD()
+ */
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ clocks = <&hfclk_26m>;
+ clock-names = "fck";
+
+ twl_power: power {
+ compatible = "ti,twl4030-power-reset";
+ ti,use_poweroff;
+ };
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+
+ codec {
+ ti,ramp_delay_value = <3>;
+ };
+ };
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl_keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <6>;
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_9)
+ MATRIX_KEY(0, 1, KEY_8)
+ MATRIX_KEY(0, 2, KEY_I)
+ MATRIX_KEY(0, 3, KEY_J)
+ MATRIX_KEY(0, 4, KEY_N)
+ MATRIX_KEY(0, 5, KEY_M)
+ MATRIX_KEY(1, 0, KEY_0)
+ MATRIX_KEY(1, 1, KEY_7)
+ MATRIX_KEY(1, 2, KEY_U)
+ MATRIX_KEY(1, 3, KEY_H)
+ MATRIX_KEY(1, 4, KEY_B)
+ MATRIX_KEY(1, 5, KEY_SPACE)
+ MATRIX_KEY(2, 0, KEY_BACKSPACE)
+ MATRIX_KEY(2, 1, KEY_6)
+ MATRIX_KEY(2, 2, KEY_Y)
+ MATRIX_KEY(2, 3, KEY_G)
+ MATRIX_KEY(2, 4, KEY_V)
+ MATRIX_KEY(2, 5, KEY_FN)
+ MATRIX_KEY(3, 0, KEY_O)
+ MATRIX_KEY(3, 1, KEY_5)
+ MATRIX_KEY(3, 2, KEY_T)
+ MATRIX_KEY(3, 3, KEY_F)
+ MATRIX_KEY(3, 4, KEY_C)
+ MATRIX_KEY(4, 0, KEY_P)
+ MATRIX_KEY(4, 1, KEY_4)
+ MATRIX_KEY(4, 2, KEY_R)
+ MATRIX_KEY(4, 3, KEY_D)
+ MATRIX_KEY(4, 4, KEY_X)
+ MATRIX_KEY(5, 0, KEY_K)
+ MATRIX_KEY(5, 1, KEY_3)
+ MATRIX_KEY(5, 2, KEY_E)
+ MATRIX_KEY(5, 3, KEY_S)
+ MATRIX_KEY(5, 4, KEY_Z)
+ MATRIX_KEY(6, 0, KEY_L)
+ MATRIX_KEY(6, 1, KEY_2)
+ MATRIX_KEY(6, 2, KEY_W)
+ MATRIX_KEY(6, 3, KEY_A)
+ MATRIX_KEY(6, 4, KEY_RIGHTBRACE)
+ MATRIX_KEY(7, 0, KEY_ENTER)
+ MATRIX_KEY(7, 1, KEY_1)
+ MATRIX_KEY(7, 2, KEY_Q)
+ MATRIX_KEY(7, 3, KEY_LEFTSHIFT)
+ MATRIX_KEY(7, 4, KEY_LEFTBRACE )
+ >;
+};
+
+/* backup battery charger */
+&charger {
+ ti,bb-uvolt = <3200000>;
+ ti,bb-uamp = <150>;
+};
+
+/* MMC2 */
+&vmmc2 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <3150000>;
+};
+
+/* LCD */
+&vaux1 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+};
+
+/* USB Host PHY */
+&vaux2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+/* available on expansion connector */
+&vaux3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
+/* ADS7846 and nubs */
+&vaux4 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
+/* power audio DAC and LID sensor */
+&vsim {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ /* no clients so we should disable clock */
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ bq27500@55 {
+ compatible = "ti,bq27500";
+ reg = <0x55>;
+ };
+
+};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
+
+/*
+ * Many pandora boards have been produced with defective write-protect switches
+ * on either slot, so it was decided not to use this feature. If you know
+ * your board has good switches, feel free to uncomment wp-gpios below.
+ */
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+ cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
+ /*wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;*/ /* GPIO_126 */
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vmmc2>;
+ bus-width = <4>;
+ cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
+ /*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/ /* GPIO_127 */
+};
+
+&mmc3 {
+ vmmc-supply = <&wlan_en>;
+
+ bus-width = <4>;
+ non-removable;
+ ti,non-removable;
+ cap-power-off-card;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wlan: wifi@1 {
+ compatible = "ti,wl1251";
+
+ reg = <1>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */
+
+ ti,wl1251-has-eeprom;
+ };
+};
+
+/* bluetooth*/
+&uart1 {
+};
+
+/* spare (expansion connector) */
+&uart2 {
+};
+
+/* console (expansion connector) */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&usbhshost {
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy>;
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ nand-bus-width = <16>;
+ ti,nand-ecc-opt = "sw";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,device-width = <2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* u-boot uses mtdparts=nand:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs) */
+
+ x-loader@0 {
+ label = "xloader";
+ reg = <0 0x80000>;
+ };
+
+ bootloaders@80000 {
+ label = "uboot";
+ reg = <0x80000 0x1e0000>;
+ };
+
+ bootloaders_env@260000 {
+ label = "uboot-env";
+ reg = <0x260000 0x20000>;
+ };
+
+ kernel@280000 {
+ label = "boot";
+ reg = <0x280000 0xa00000>;
+ };
+
+ filesystem@c80000 {
+ label = "rootfs";
+ reg = <0xc80000 0>; /* 0 = MTDPART_SIZ_FULL */
+ };
+ };
+};
+
+&mcspi1 {
+ tsc2046@0 {
+ reg = <0>; /* CS0 */
+ compatible = "ti,tsc2046";
+ spi-max-frequency = <1000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&penirq_pins>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <30 IRQ_TYPE_NONE>; /* GPIO_94 */
+ pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vaux4>;
+
+ ti,x-min = /bits/ 16 <0>;
+ ti,x-max = /bits/ 16 <8000>;
+ ti,y-min = /bits/ 16 <0>;
+ ti,y-max = /bits/ 16 <4800>;
+ ti,x-plate-ohms = /bits/ 16 <40>;
+ ti,pressure-max = /bits/ 16 <255>;
+
+ wakeup-source;
+ };
+
+ lcd: lcd@1 {
+ reg = <1>; /* CS1 */
+ compatible = "tpo,td043mtea1";
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+ reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; /* GPIO_157 */
+ vcc-supply = <&vaux1>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
+
+};
+
+/* n/a - used as GPIOs */
+&mcbsp1 {
+};
+
+/* audio DAC */
+&mcbsp2 {
+};
+
+/* bluetooth */
+&mcbsp3 {
+};
+
+/* to twl4030*/
+&mcbsp4 {
+};
+
+&venc {
+ status = "okay";
+
+ vdda-supply = <&vdac>;
+
+ port {
+ venc_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ ti,channels = <2>;
+ };
+ };
+};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = < &dss_dpi_pins >;
+
+ status = "okay";
+ vdds_dsi-supply = <&vpll2>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap3-panel-sharp-ls037v7dw01.dtsi b/src/arm/ti/omap/omap3-panel-sharp-ls037v7dw01.dtsi
new file mode 100644
index 0000000..2dbb687
--- /dev/null
+++ b/src/arm/ti/omap/omap3-panel-sharp-ls037v7dw01.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common file for omap dpi panels with QVGA and reset pins
+ *
+ * Note that the board specifc DTS file needs to specify
+ * at minimum the GPIO enable-gpios for display, and
+ * gpios for gpio-backlight.
+ */
+
+/ {
+ aliases {
+ display0 = &lcd0;
+ };
+
+ backlight0: backlight {
+ compatible = "gpio-backlight";
+ default-on;
+ };
+
+ /* 3.3V GPIO controlled regulator for LCD_ENVDD */
+ lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <70000>;
+ };
+
+ lcd0: display {
+ compatible = "sharp,ls037v7dw01";
+ label = "lcd";
+ power-supply = <&lcd_3v3>;
+ envdd-supply = <&lcd_3v3>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+ regulator-always-on;
+};
+
+&dss {
+ status = "okay";
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <18>;
+ };
+ };
+};
+
+&mcspi1 {
+ tsc2046@0 {
+ reg = <0>; /* CS0 */
+ compatible = "ti,tsc2046";
+ spi-max-frequency = <1000000>;
+ vcc-supply = <&lcd_3v3>;
+ ti,x-min = /bits/ 16 <0>;
+ ti,x-max = /bits/ 16 <8000>;
+ ti,y-min = /bits/ 16 <0>;
+ ti,y-max = /bits/ 16 <4800>;
+ ti,x-plate-ohms = /bits/ 16 <40>;
+ ti,pressure-max = /bits/ 16 <255>;
+ ti,swap-xy;
+ wakeup-source;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-sb-t35.dtsi b/src/arm/ti/omap/omap3-sb-t35.dtsi
new file mode 100644
index 0000000..6730c74
--- /dev/null
+++ b/src/arm/ti/omap/omap3-sb-t35.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
+ */
+
+/ {
+ tfp410: encoder {
+ compatible = "ti,tfp410";
+
+ powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tfp410_pins>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: dvi-connector {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
+ audio_amp: audio_amp {
+ compatible = "regulator-fixed";
+ regulator-name = "audio_amp";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sb_t35_audio_amp>;
+ gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; /* gpio_61 */
+ regulator-always-on;
+ };
+};
+
+&omap3_pmx_core {
+ smsc2_pins: smsc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs4.gpmc_ncs4 */
+ OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */
+ >;
+ };
+
+ tfp410_pins: tfp410-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
+ >;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ sb_t35_audio_amp: sb-t35-audio-amp-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) /* gpmc_nbe1.gpio_61 */
+ >;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <400000>;
+
+ at24@50 {
+ compatible = "atmel,24c02";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+};
+
+&gpmc {
+ ranges = <4 0 0x2d000000 0x01000000>;
+
+ smsc2: ethernet@4,0 {
+ compatible = "smsc,lan9221", "smsc,lan9115";
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc2_pins>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ reg = <4 0 0xff>;
+ bank-width = <2>;
+ gpmc,device-width = <1>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+ gpmc,cs-on-ns = <5>;
+ gpmc,cs-rd-off-ns = <150>;
+ gpmc,cs-wr-off-ns = <150>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <15>;
+ gpmc,adv-wr-off-ns = <40>;
+ gpmc,oe-on-ns = <45>;
+ gpmc,oe-off-ns = <140>;
+ gpmc,we-on-ns = <45>;
+ gpmc,we-off-ns = <140>;
+ gpmc,rd-cycle-ns = <155>;
+ gpmc,wr-cycle-ns = <155>;
+ gpmc,access-ns = <120>;
+ gpmc,page-burst-access-ns = <20>;
+ gpmc,bus-turnaround-ns = <75>;
+ gpmc,cycle2cycle-delay-ns = <75>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,wr-access-ns = <0>;
+ vddvario-supply = <&vddvario>;
+ vdd33a-supply = <&vdd33a>;
+ reg-io-width = <4>;
+ smsc,save-mac-address;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-sbc-t3517.dts b/src/arm/ti/omap/omap3-sbc-t3517.dts
new file mode 100644
index 0000000..07bec48
--- /dev/null
+++ b/src/arm/ti/omap/omap3-sbc-t3517.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Suppport for CompuLab SBC-T3517 with CM-T3517
+ */
+
+#include "omap3-cm-t3517.dts"
+#include "omap3-sb-t35.dtsi"
+
+/ {
+ model = "CompuLab SBC-T3517 with CM-T3517";
+ compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+
+ aliases {
+ display0 = &dvi0;
+ display1 = &tv0;
+ };
+
+ /* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
+ vddvario: regulator-vddvario-sb-t35 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddvario";
+ regulator-always-on;
+ };
+
+ vdd33a: regulator-vdd33a-sb-t35 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd33a";
+ regulator-always-on;
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &sb_t35_usb_hub_pins
+ &usb_hub_pins
+ >;
+
+ mmc1_aux_pins: mmc1-aux-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59 */
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */
+ >;
+ };
+
+ sb_t35_usb_hub_pins: sb-t35-usb-hub-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */
+ >;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &mmc1_pins
+ &mmc1_aux_pins
+ >;
+
+ wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */
+ cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
+};
+
+&dss {
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&gpmc {
+ ranges = <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */
+ <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
+};
diff --git a/src/arm/ti/omap/omap3-sbc-t3530.dts b/src/arm/ti/omap/omap3-sbc-t3530.dts
new file mode 100644
index 0000000..1beefc3
--- /dev/null
+++ b/src/arm/ti/omap/omap3-sbc-t3530.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Suppport for CompuLab SBC-T3530 with CM-T3530
+ */
+
+#include "omap3-cm-t3530.dts"
+#include "omap3-sb-t35.dtsi"
+
+/ {
+ model = "CompuLab SBC-T3530 with CM-T3530";
+ compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
+
+ aliases {
+ display0 = &dvi0;
+ display1 = &tv0;
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sb_t35_usb_hub_pins>;
+
+ sb_t35_usb_hub_pins: sb-t35-usb-hub-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
+ >;
+ };
+};
+
+&gpmc {
+ ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
+ <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */
+ <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
+};
+
+&mmc1 {
+ cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+&dss {
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
diff --git a/src/arm/ti/omap/omap3-sbc-t3730.dts b/src/arm/ti/omap/omap3-sbc-t3730.dts
new file mode 100644
index 0000000..aefc118
--- /dev/null
+++ b/src/arm/ti/omap/omap3-sbc-t3730.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Suppport for CompuLab SBC-T3730 with CM-T3730
+ */
+
+#include "omap3-cm-t3730.dts"
+#include "omap3-sb-t35.dtsi"
+
+/ {
+ model = "CompuLab SBC-T3730 with CM-T3730";
+ compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3";
+
+ aliases {
+ display0 = &dvi0;
+ display1 = &tv0;
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sb_t35_usb_hub_pins>;
+
+ sb_t35_usb_hub_pins: sb-t35-usb-hub-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
+ >;
+ };
+};
+
+&gpmc {
+ ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
+ <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */
+ <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
+};
+
+&dss {
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
diff --git a/src/arm/ti/omap/omap3-sniper.dts b/src/arm/ti/omap/omap3-sniper.dts
new file mode 100644
index 0000000..79e0040
--- /dev/null
+++ b/src/arm/ti/omap/omap3-sniper.dts
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015-2016 Paul Kocialkowski <contact@paulk.fr>
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "LG Optimus Black";
+ compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap3";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */
+ >;
+ };
+
+ dp3t_sel_pins: dp3t-sel-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE4) /* gpio_161 */
+ OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* gpio_162 */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ lp8720_en_pin: lp8720-en-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2080, PIN_OUTPUT | MUX_MODE4) /* gpio_37 */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT | MUX_MODE0) /* sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3 */
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT | MUX_MODE0) /* sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT | MUX_MODE0) /* sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat4 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat5 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat6 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat7 */
+ >;
+ };
+
+ usb_otg_hs_pins: usb-otg-hs-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk */
+ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp */
+ OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir */
+ OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt */
+ OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0 */
+ OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1 */
+ OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2 */
+ OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3 */
+ OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4 */
+ OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5 */
+ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6 */
+ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7 */
+ >;
+ };
+};
+
+&omap3_pmx_wkup {
+ pinctrl-names = "default";
+
+ mmc1_cd_pin: mmc1-cd-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | MUX_MODE4) /* gpio_10 */
+ >;
+ };
+};
+
+&gpio2 {
+ ti,no-reset-on-init;
+};
+
+&gpio5 {
+ ti,no-reset-on-init;
+};
+
+&gpio6 {
+ ti,no-reset-on-init;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins &dp3t_sel_pins>;
+
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ power {
+ compatible = "ti,twl4030-power";
+ ti,use_poweroff;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <400000>;
+
+ lp8720@7d {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lp8720_en_pin>;
+
+ compatible = "ti,lp8720";
+ reg = <0x7d>;
+
+ enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio_37 */
+
+ lp8720_ldo1: ldo1 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins &mmc1_cd_pin>;
+
+ vmmc-supply = <&lp8720_ldo1>;
+ cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio 10 */
+ bus-width = <4>;
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+
+ vmmc-supply = <&vmmc2>;
+ ti,non-removable;
+ bus-width = <8>;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&usb_otg_hs {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_otg_hs_pins>;
+
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl_keypad {
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x00, KEY_VOLUMEUP)
+ MATRIX_KEY(0x01, 0x00, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x02, 0x00, KEY_SELECT)
+ >;
+};
+
+/*
+ * The TWL4030 VAUX2 and VDAC regulators power sensors that are slaves on I2C3.
+ * When not powered, these sensors cause the I2C3 clock to stay low at all times,
+ * making it impossible to reach other devices on I2C3.
+ */
+
+&vaux2 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+};
+
+&vdac {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
diff --git a/src/arm/ti/omap/omap3-tao3530.dtsi b/src/arm/ti/omap/omap3-tao3530.dtsi
new file mode 100644
index 0000000..92a5846
--- /dev/null
+++ b/src/arm/ti/omap/omap3-tao3530.dtsi
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes1_target {
+ status = "disabled";
+};
+
+&aes2_target {
+ status = "disabled";
+};
+
+&sham {
+ status = "disabled";
+};
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ /* HS USB Port 2 Power */
+ hsusb2_power: hsusb2_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
+ startup-delay-us = <70000>;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2-phy-pins {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */
+ vcc-supply = <&hsusb2_power>;
+ #phy-cells = <0>;
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "omap3beagle";
+
+ /* McBSP2 is used for onboard sound, same as on beagle */
+ ti,mcbsp = <&mcbsp2>;
+ };
+
+ /* Regulator to enable/switch the vcc of the Wifi module */
+ mmc2_sdio_poweron: regulator-mmc2-sdio-poweron {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-mmc2-sdio-poweron";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+ gpio = <&gpio5 29 GPIO_ACTIVE_LOW>; /* gpio_157 */
+ startup-delay-us = <10000>;
+ };
+};
+
+&omap3_pmx_core {
+ hsusbb2_pins: hsusbb2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3_CORE1_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3_CORE1_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3_CORE1_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3_CORE1_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3_CORE1_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
+ OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
+ OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
+ OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
+ OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ >;
+ };
+
+ /* wlan GPIO output for WLAN_EN */
+ wlan_gpio: wlan-gpio-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr gpio_157 */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl.i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.i2c3_sda */
+ >;
+ };
+
+ mcspi1_pins: mcspi1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
+ OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
+ OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+ OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
+ >;
+ };
+
+ mcspi3_pins: mcspi3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x25dc, PIN_OUTPUT | MUX_MODE1) /* etk_d0.mcspi3_simo gpio14 INPUT | MODE1 */
+ OMAP3_CORE1_IOPAD(0x25de, PIN_INPUT_PULLUP | MUX_MODE1) /* etk_d1.mcspi3_somi gpio15 INPUT | MODE1 */
+ OMAP3_CORE1_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE1) /* etk_d2.mcspi3_cs0 gpio16 INPUT | MODE1 */
+ OMAP3_CORE1_IOPAD(0x25e2, PIN_INPUT | MUX_MODE1) /* etk_d3.mcspi3_clk gpio17 INPUT | MODE1 */
+ >;
+ };
+
+ mcbsp3_pins: mcbsp3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dr.uart2_rts */
+ OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clk.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_fsx.uart2_rx */
+ >;
+ };
+};
+
+/* McBSP1: mux'ed with GPIO158 as clock for HA-DSP */
+&mcbsp1 {
+ status = "disabled";
+};
+
+&mcbsp2 {
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+};
+
+&mcspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi1_pins>;
+};
+
+&mcspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi3_pins>;
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc1>;
+ vqmmc-supply = <&vsim>;
+ cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
+ bus-width = <8>;
+};
+
+// WiFi (Marvell 88W8686) on MMC2/SDIO
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&mmc2_sdio_poweron>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&usbhshost {
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy>;
+};
+
+&twl_gpio {
+ ti,use-leds;
+ /* pullups: BIT(1) */
+ ti,pullups = <0x000002>;
+ /*
+ * pulldowns:
+ * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <0x03a1c4>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&mcbsp3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp3_pins>;
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
+ ti,nand-ecc-opt = "sw";
+
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <36>;
+ gpmc,cs-wr-off-ns = <36>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <24>;
+ gpmc,adv-wr-off-ns = <36>;
+ gpmc,oe-on-ns = <6>;
+ gpmc,oe-off-ns = <48>;
+ gpmc,we-on-ns = <6>;
+ gpmc,we-off-ns = <30>;
+ gpmc,rd-cycle-ns = <72>;
+ gpmc,wr-cycle-ns = <72>;
+ gpmc,access-ns = <54>;
+ gpmc,wr-access-ns = <30>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ x-loader@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+
+ bootloaders@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1e0000>;
+ };
+
+ bootloaders_env@260000 {
+ label = "U-Boot Env";
+ reg = <0x260000 0x20000>;
+ };
+
+ kernel@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x400000>;
+ };
+
+ filesystem@680000 {
+ label = "File System";
+ reg = <0x680000 0xf980000>;
+ };
+ };
+};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
+
+&vaux2 {
+ regulator-name = "vdd_ehci";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
diff --git a/src/arm/ti/omap/omap3-thunder.dts b/src/arm/ti/omap/omap3-thunder.dts
new file mode 100644
index 0000000..c87956c
--- /dev/null
+++ b/src/arm/ti/omap/omap3-thunder.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ */
+
+#include "omap3-tao3530.dtsi"
+
+/ {
+ model = "TI OMAP3 Thunder baseboard with TAO3530 SOM";
+ compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
+};
+
+&omap3_pmx_core {
+ dss_dpi_pins: dss-dpi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ lte430_pins: lte430-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */
+ >;
+ };
+
+ backlight_pins: backlight-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */
+ >;
+ };
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+ regulator-always-on;
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+/ {
+ aliases {
+ display0 = &lcd0;
+ };
+
+ lcd0: display {
+ compatible = "samsung,lte430wq-f0c", "panel-dpi";
+ label = "lcd";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <<e430_pins>;
+ enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <3>;
+ hback-porch = <2>;
+ hsync-len = <42>;
+ vback-porch = <2>;
+ vfront-porch = <3>;
+ vsync-len = <11>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+ backlight {
+ compatible = "gpio-backlight";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+ gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 */
+
+ default-on;
+ };
+};
diff --git a/src/arm/ti/omap/omap3-zoom3.dts b/src/arm/ti/omap/omap3-zoom3.dts
new file mode 100644
index 0000000..9f1e125
--- /dev/null
+++ b/src/arm/ti/omap/omap3-zoom3.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap-zoom-common.dtsi"
+
+/ {
+ model = "TI Zoom3";
+ compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap3";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ vddvario: regulator-vddvario {
+ compatible = "regulator-fixed";
+ regulator-name = "vddvario";
+ regulator-always-on;
+ };
+
+ vdd33a: regulator-vdd33a {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd33a";
+ regulator-always-on;
+ };
+
+ wl12xx_vmmc: wl12xx_vmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_gpio>;
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+};
+
+&omap3_pmx_core {
+ /* REVISIT: twl gpio0 is mmc0_cd */
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat4.sdmmc2_dat4 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat5.sdmmc2_dat5 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat6.sdmmc2_dat6 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */
+ >;
+ };
+
+ mmc3_pins: mmc3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 WLAN IRQ */
+ OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
+ >;
+ };
+
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */
+ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */
+ OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
+ OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ /* wl12xx GPIO output for WLAN_EN */
+ wl12xx_gpio: wl12xx-gpio-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x211a, PIN_OUTPUT| MUX_MODE4) /* cam_d2.gpio_101 */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ mmc3_2_pins: mmc3-2-pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
+ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
+ OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+ OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
+ OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
+ >;
+ };
+};
+
+&omap3_pmx_wkup {
+ wlan_host_wkup: wlan-host-wkup-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
+ >;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+#include "twl4030.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ /*
+ * TVP5146 Video decoder-in for analog input support.
+ */
+ tvp5146@5c {
+ compatible = "ti,tvp5146m2";
+ reg = <0x5c>;
+ };
+};
+
+&twl_gpio {
+ ti,use-leds;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ vqmmc-supply = <&vsim>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+};
+/*
+&mmc2 {
+ vmmc-supply = <&vmmc2>;
+ ti,non-removable;
+ bus-width = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+};
+*/
+&mmc3 {
+ vmmc-supply = <&wl12xx_vmmc>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins &mmc3_2_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 162 */
+ ref-clock-frequency = <26000000>;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+ status = "disabled";
+};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ mode = <3>;
+ power = <50>;
+};
diff --git a/src/arm/ti/omap/omap3.dtsi b/src/arm/ti/omap/omap3.dtsi
new file mode 100644
index 0000000..92cd4c9
--- /dev/null
+++ b/src/arm/ti/omap/omap3.dtsi
@@ -0,0 +1,1039 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+/ {
+ compatible = "ti,omap3430", "ti,omap3";
+ interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+
+ aliases {
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ mmc0 = &mmc1;
+ mmc1 = &mmc2;
+ mmc2 = &mmc3;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ device_type = "cpu";
+ reg = <0x0>;
+
+ clocks = <&dpll1_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+ };
+ };
+
+ pmu@54000000 {
+ compatible = "arm,cortex-a8-pmu";
+ reg = <0x54000000 0x800000>;
+ interrupts = <3>;
+ ti,hwmods = "debugss";
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is used for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+ };
+
+ iva: iva {
+ compatible = "ti,iva2.2";
+ ti,hwmods = "iva";
+
+ dsp {
+ compatible = "ti,omap3-c64";
+ };
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the OMAP3 interconnect.
+ * The real OMAP interconnect network is quite complex.
+ * Since it will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp@68000000 {
+ compatible = "ti,omap3-l3-smx", "simple-bus";
+ reg = <0x68000000 0x10000>;
+ interrupts = <9 10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main";
+
+ l4_core: l4@48000000 {
+ compatible = "ti,omap3-l4-core", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48000000 0x1000000>;
+
+ scm: scm@2000 {
+ compatible = "ti,omap3-scm", "simple-bus";
+ reg = <0x2000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x2000>;
+
+ omap3_pmx_core: pinmux@30 {
+ compatible = "ti,omap3-padconf",
+ "pinctrl-single";
+ reg = <0x30 0x238>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
+
+ scm_conf: scm_conf@270 {
+ compatible = "syscon", "simple-bus";
+ reg = <0x270 0x330>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x270 0x330>;
+
+ pbias_regulator: pbias_regulator@2b0 {
+ compatible = "ti,pbias-omap3", "ti,pbias-omap";
+ reg = <0x2b0 0x4>;
+ syscon = <&scm_conf>;
+ pbias_mmc_reg: pbias_mmc_omap2430 {
+ regulator-name = "pbias_mmc_omap2430";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ scm_clockdomains: clockdomains {
+ };
+
+ omap3_pmx_wkup: pinmux@a00 {
+ compatible = "ti,omap3-padconf",
+ "pinctrl-single";
+ reg = <0xa00 0x5c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
+ };
+ };
+
+ aes1_target: target-module@480a6000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x480a6044 0x4>,
+ <0x480a6048 0x4>,
+ <0x480a604c 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&aes1_ick>;
+ clock-names = "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x480a6000 0x2000>;
+
+ aes1: aes1@0 {
+ compatible = "ti,omap3-aes";
+ reg = <0 0x50>;
+ interrupts = <0>;
+ dmas = <&sdma 9 &sdma 10>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ aes2_target: target-module@480c5000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x480c5044 0x4>,
+ <0x480c5048 0x4>,
+ <0x480c504c 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&aes2_ick>;
+ clock-names = "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x480c5000 0x2000>;
+
+ aes2: aes2@0 {
+ compatible = "ti,omap3-aes";
+ reg = <0 0x50>;
+ interrupts = <0>;
+ dmas = <&sdma 65 &sdma 66>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ prm: prm@48306000 {
+ compatible = "ti,omap3-prm";
+ reg = <0x48306000 0x4000>;
+ interrupts = <11>;
+
+ prm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prm_clockdomains: clockdomains {
+ };
+ };
+
+ cm: cm@48004000 {
+ compatible = "ti,omap3-cm";
+ reg = <0x48004000 0x4000>;
+
+ cm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_clockdomains: clockdomains {
+ };
+ };
+
+ target-module@48320000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x48320000 0x4>,
+ <0x48320004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ clocks = <&wkup_32k_fck>, <&omap_32ksync_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x48320000 0x1000>;
+
+ counter32k: counter@0 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x0 0x20>;
+ };
+ };
+
+ intc: interrupt-controller@48200000 {
+ compatible = "ti,omap3-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x48200000 0x1000>;
+ };
+
+ target-module@48056000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x48056000 0x4>,
+ <0x4805602c 0x4>,
+ <0x48056028 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, core_l3_clkdm */
+ clocks = <&core_l3_ick>;
+ clock-names = "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48056000 0x1000>;
+
+ sdma: dma-controller@0 {
+ compatible = "ti,omap3430-sdma", "ti,omap-sdma";
+ reg = <0x0 0x1000>;
+ interrupts = <12>,
+ <13>,
+ <14>,
+ <15>;
+ #dma-cells = <1>;
+ dma-channels = <32>;
+ dma-requests = <96>;
+ };
+ };
+
+ gpio1: gpio@48310000 {
+ compatible = "ti,omap3-gpio";
+ reg = <0x48310000 0x200>;
+ interrupts = <29>;
+ ti,hwmods = "gpio1";
+ ti,gpio-always-on;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@49050000 {
+ compatible = "ti,omap3-gpio";
+ reg = <0x49050000 0x200>;
+ interrupts = <30>;
+ ti,hwmods = "gpio2";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@49052000 {
+ compatible = "ti,omap3-gpio";
+ reg = <0x49052000 0x200>;
+ interrupts = <31>;
+ ti,hwmods = "gpio3";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@49054000 {
+ compatible = "ti,omap3-gpio";
+ reg = <0x49054000 0x200>;
+ interrupts = <32>;
+ ti,hwmods = "gpio4";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio@49056000 {
+ compatible = "ti,omap3-gpio";
+ reg = <0x49056000 0x200>;
+ interrupts = <33>;
+ ti,hwmods = "gpio5";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio@49058000 {
+ compatible = "ti,omap3-gpio";
+ reg = <0x49058000 0x200>;
+ interrupts = <34>;
+ ti,hwmods = "gpio6";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ uart1: serial@4806a000 {
+ compatible = "ti,omap3-uart";
+ reg = <0x4806a000 0x2000>;
+ interrupts-extended = <&intc 72>;
+ dmas = <&sdma 49 &sdma 50>;
+ dma-names = "tx", "rx";
+ ti,hwmods = "uart1";
+ clock-frequency = <48000000>;
+ };
+
+ uart2: serial@4806c000 {
+ compatible = "ti,omap3-uart";
+ reg = <0x4806c000 0x400>;
+ interrupts-extended = <&intc 73>;
+ dmas = <&sdma 51 &sdma 52>;
+ dma-names = "tx", "rx";
+ ti,hwmods = "uart2";
+ clock-frequency = <48000000>;
+ };
+
+ uart3: serial@49020000 {
+ compatible = "ti,omap3-uart";
+ reg = <0x49020000 0x400>;
+ interrupts-extended = <&intc 74>;
+ dmas = <&sdma 53 &sdma 54>;
+ dma-names = "tx", "rx";
+ ti,hwmods = "uart3";
+ clock-frequency = <48000000>;
+ };
+
+ i2c1: i2c@48070000 {
+ compatible = "ti,omap3-i2c";
+ reg = <0x48070000 0x80>;
+ interrupts = <56>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ };
+
+ i2c2: i2c@48072000 {
+ compatible = "ti,omap3-i2c";
+ reg = <0x48072000 0x80>;
+ interrupts = <57>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c2";
+ };
+
+ i2c3: i2c@48060000 {
+ compatible = "ti,omap3-i2c";
+ reg = <0x48060000 0x80>;
+ interrupts = <61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c3";
+ };
+
+ mailbox: mailbox@48094000 {
+ compatible = "ti,omap3-mailbox";
+ ti,hwmods = "mailbox";
+ reg = <0x48094000 0x200>;
+ interrupts = <26>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <2>;
+ ti,mbox-num-fifos = <2>;
+ mbox_dsp: mbox-dsp {
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <1 0 0>;
+ };
+ };
+
+ mcspi1: spi@48098000 {
+ compatible = "ti,omap2-mcspi";
+ reg = <0x48098000 0x100>;
+ interrupts = <65>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi1";
+ ti,spi-num-cs = <4>;
+ dmas = <&sdma 35>,
+ <&sdma 36>,
+ <&sdma 37>,
+ <&sdma 38>,
+ <&sdma 39>,
+ <&sdma 40>,
+ <&sdma 41>,
+ <&sdma 42>;
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
+ };
+
+ mcspi2: spi@4809a000 {
+ compatible = "ti,omap2-mcspi";
+ reg = <0x4809a000 0x100>;
+ interrupts = <66>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi2";
+ ti,spi-num-cs = <2>;
+ dmas = <&sdma 43>,
+ <&sdma 44>,
+ <&sdma 45>,
+ <&sdma 46>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
+
+ mcspi3: spi@480b8000 {
+ compatible = "ti,omap2-mcspi";
+ reg = <0x480b8000 0x100>;
+ interrupts = <91>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi3";
+ ti,spi-num-cs = <2>;
+ dmas = <&sdma 15>,
+ <&sdma 16>,
+ <&sdma 23>,
+ <&sdma 24>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
+
+ mcspi4: spi@480ba000 {
+ compatible = "ti,omap2-mcspi";
+ reg = <0x480ba000 0x100>;
+ interrupts = <48>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi4";
+ ti,spi-num-cs = <1>;
+ dmas = <&sdma 70>, <&sdma 71>;
+ dma-names = "tx0", "rx0";
+ };
+
+ hdqw1w: 1w@480b2000 {
+ compatible = "ti,omap3-1w";
+ reg = <0x480b2000 0x1000>;
+ interrupts = <58>;
+ ti,hwmods = "hdq1w";
+ };
+
+ mmc1: mmc@4809c000 {
+ compatible = "ti,omap3-hsmmc";
+ reg = <0x4809c000 0x200>;
+ interrupts = <83>;
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ dmas = <&sdma 61>, <&sdma 62>;
+ dma-names = "tx", "rx";
+ pbias-supply = <&pbias_mmc_reg>;
+ };
+
+ mmc2: mmc@480b4000 {
+ compatible = "ti,omap3-hsmmc";
+ reg = <0x480b4000 0x200>;
+ interrupts = <86>;
+ ti,hwmods = "mmc2";
+ dmas = <&sdma 47>, <&sdma 48>;
+ dma-names = "tx", "rx";
+ };
+
+ mmc3: mmc@480ad000 {
+ compatible = "ti,omap3-hsmmc";
+ reg = <0x480ad000 0x200>;
+ interrupts = <94>;
+ ti,hwmods = "mmc3";
+ dmas = <&sdma 77>, <&sdma 78>;
+ dma-names = "tx", "rx";
+ };
+
+ mmu_isp: mmu@480bd400 {
+ #iommu-cells = <0>;
+ compatible = "ti,omap2-iommu";
+ reg = <0x480bd400 0x80>;
+ interrupts = <24>;
+ ti,hwmods = "mmu_isp";
+ ti,#tlb-entries = <8>;
+ };
+
+ mmu_iva: mmu@5d000000 {
+ #iommu-cells = <0>;
+ compatible = "ti,omap2-iommu";
+ reg = <0x5d000000 0x80>;
+ interrupts = <28>;
+ ti,hwmods = "mmu_iva";
+ status = "disabled";
+ };
+
+ wdt2: wdt@48314000 {
+ compatible = "ti,omap3-wdt";
+ reg = <0x48314000 0x80>;
+ ti,hwmods = "wd_timer2";
+ };
+
+ mcbsp1: mcbsp@48074000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x48074000 0xff>;
+ reg-names = "mpu";
+ interrupts = <16>, /* OCP compliant interrupt */
+ <59>, /* TX interrupt */
+ <60>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp1";
+ dmas = <&sdma 31>,
+ <&sdma 32>;
+ dma-names = "tx", "rx";
+ clocks = <&mcbsp1_fck>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ /* Likely needs to be tagged disabled on HS devices */
+ rng_target: target-module@480a0000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x480a003c 0x4>,
+ <0x480a0040 0x4>,
+ <0x480a0044 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ ti,syss-mask = <1>;
+ clocks = <&rng_ick>;
+ clock-names = "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x480a0000 0x2000>;
+
+ rng: rng@0 {
+ compatible = "ti,omap2-rng";
+ reg = <0x0 0x2000>;
+ interrupts = <52>;
+ };
+ };
+
+ mcbsp2: mcbsp@49022000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x49022000 0xff>,
+ <0x49028000 0xff>;
+ reg-names = "mpu", "sidetone";
+ interrupts = <17>, /* OCP compliant interrupt */
+ <62>, /* TX interrupt */
+ <63>, /* RX interrupt */
+ <4>; /* Sidetone */
+ interrupt-names = "common", "tx", "rx", "sidetone";
+ ti,buffer-size = <1280>;
+ ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
+ dmas = <&sdma 33>,
+ <&sdma 34>;
+ dma-names = "tx", "rx";
+ clocks = <&mcbsp2_fck>, <&mcbsp2_ick>;
+ clock-names = "fck", "ick";
+ status = "disabled";
+ };
+
+ mcbsp3: mcbsp@49024000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x49024000 0xff>,
+ <0x4902a000 0xff>;
+ reg-names = "mpu", "sidetone";
+ interrupts = <22>, /* OCP compliant interrupt */
+ <89>, /* TX interrupt */
+ <90>, /* RX interrupt */
+ <5>; /* Sidetone */
+ interrupt-names = "common", "tx", "rx", "sidetone";
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
+ dmas = <&sdma 17>,
+ <&sdma 18>;
+ dma-names = "tx", "rx";
+ clocks = <&mcbsp3_fck>, <&mcbsp3_ick>;
+ clock-names = "fck", "ick";
+ status = "disabled";
+ };
+
+ mcbsp4: mcbsp@49026000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x49026000 0xff>;
+ reg-names = "mpu";
+ interrupts = <23>, /* OCP compliant interrupt */
+ <54>, /* TX interrupt */
+ <55>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp4";
+ dmas = <&sdma 19>,
+ <&sdma 20>;
+ dma-names = "tx", "rx";
+ clocks = <&mcbsp4_fck>;
+ clock-names = "fck";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ mcbsp5: mcbsp@48096000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x48096000 0xff>;
+ reg-names = "mpu";
+ interrupts = <27>, /* OCP compliant interrupt */
+ <81>, /* TX interrupt */
+ <82>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp5";
+ dmas = <&sdma 21>,
+ <&sdma 22>;
+ dma-names = "tx", "rx";
+ clocks = <&mcbsp5_fck>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ sham: sham@480c3000 {
+ compatible = "ti,omap3-sham";
+ ti,hwmods = "sham";
+ reg = <0x480c3000 0x64>;
+ interrupts = <49>;
+ dmas = <&sdma 69>;
+ dma-names = "rx";
+ };
+
+ timer1_target: target-module@48318000 {
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x48318000 0x4>,
+ <0x48318010 0x4>,
+ <0x48318014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&gpt1_fck>, <&gpt1_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x48318000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&gpt1_fck>;
+ clock-names = "fck";
+ interrupts = <37>;
+ ti,timer-alwon;
+ };
+ };
+
+ timer2_target: target-module@49032000 {
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x49032000 0x4>,
+ <0x49032010 0x4>,
+ <0x49032014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&gpt2_fck>, <&gpt2_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49032000 0x1000>;
+
+ timer2: timer@0 {
+ compatible = "ti,omap3430-timer";
+ reg = <0 0x400>;
+ interrupts = <38>;
+ };
+ };
+
+ timer3: timer@49034000 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x49034000 0x400>;
+ interrupts = <39>;
+ ti,hwmods = "timer3";
+ };
+
+ timer4: timer@49036000 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x49036000 0x400>;
+ interrupts = <40>;
+ ti,hwmods = "timer4";
+ };
+
+ timer5: timer@49038000 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x49038000 0x400>;
+ interrupts = <41>;
+ ti,hwmods = "timer5";
+ ti,timer-dsp;
+ };
+
+ timer6: timer@4903a000 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x4903a000 0x400>;
+ interrupts = <42>;
+ ti,hwmods = "timer6";
+ ti,timer-dsp;
+ };
+
+ timer7: timer@4903c000 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x4903c000 0x400>;
+ interrupts = <43>;
+ ti,hwmods = "timer7";
+ ti,timer-dsp;
+ };
+
+ timer8: timer@4903e000 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x4903e000 0x400>;
+ interrupts = <44>;
+ ti,hwmods = "timer8";
+ ti,timer-pwm;
+ ti,timer-dsp;
+ };
+
+ timer9: timer@49040000 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x49040000 0x400>;
+ interrupts = <45>;
+ ti,hwmods = "timer9";
+ ti,timer-pwm;
+ };
+
+ timer10: timer@48086000 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x48086000 0x400>;
+ interrupts = <46>;
+ ti,hwmods = "timer10";
+ ti,timer-pwm;
+ };
+
+ timer11: timer@48088000 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x48088000 0x400>;
+ interrupts = <47>;
+ ti,hwmods = "timer11";
+ ti,timer-pwm;
+ };
+
+ timer12_target: target-module@48304000 {
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x48304000 0x4>,
+ <0x48304010 0x4>,
+ <0x48304014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&gpt12_fck>, <&gpt12_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x48304000 0x1000>;
+
+ timer12: timer@0 {
+ compatible = "ti,omap3430-timer";
+ reg = <0 0x400>;
+ interrupts = <95>;
+ ti,timer-alwon;
+ ti,timer-secure;
+ };
+ };
+
+ usbhstll: usbhstll@48062000 {
+ compatible = "ti,usbhs-tll";
+ reg = <0x48062000 0x1000>;
+ interrupts = <78>;
+ ti,hwmods = "usb_tll_hs";
+ };
+
+ usbhshost: usbhshost@48064000 {
+ compatible = "ti,usbhs-host";
+ reg = <0x48064000 0x400>;
+ ti,hwmods = "usb_host_hs";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbhsohci: ohci@48064400 {
+ compatible = "ti,ohci-omap3";
+ reg = <0x48064400 0x400>;
+ interrupts = <76>;
+ remote-wakeup-connected;
+ };
+
+ usbhsehci: ehci@48064800 {
+ compatible = "ti,ehci-omap";
+ reg = <0x48064800 0x400>;
+ interrupts = <77>;
+ };
+ };
+
+ gpmc: gpmc@6e000000 {
+ compatible = "ti,omap3430-gpmc";
+ ti,hwmods = "gpmc";
+ reg = <0x6e000000 0x02d0>;
+ interrupts = <20>;
+ dmas = <&sdma 4>;
+ dma-names = "rxtx";
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ usb_otg_target: target-module@480ab000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x480ab400 0x4>,
+ <0x480ab404 0x4>,
+ <0x480ab408 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Clock defined in the SoC specific dtsi file */
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x480ab000 0x1000>;
+
+ usb_otg_hs: usb@0 {
+ compatible = "ti,omap3-musb";
+ reg = <0 0x1000>;
+ interrupts = <92>, <93>;
+ interrupt-names = "mc", "dma";
+ multipoint = <1>;
+ num-eps = <16>;
+ ram-bits = <12>;
+ };
+ };
+
+ dss: dss@48050000 {
+ compatible = "ti,omap3-dss";
+ reg = <0x48050000 0x200>;
+ status = "disabled";
+ ti,hwmods = "dss_core";
+ clocks = <&dss1_alwon_fck>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dispc@48050400 {
+ compatible = "ti,omap3-dispc";
+ reg = <0x48050400 0x400>;
+ interrupts = <25>;
+ ti,hwmods = "dss_dispc";
+ clocks = <&dss1_alwon_fck>;
+ clock-names = "fck";
+ };
+
+ dsi: encoder@4804fc00 {
+ compatible = "ti,omap3-dsi";
+ reg = <0x4804fc00 0x200>,
+ <0x4804fe00 0x40>,
+ <0x4804ff00 0x20>;
+ reg-names = "proto", "phy", "pll";
+ interrupts = <25>;
+ status = "disabled";
+ ti,hwmods = "dss_dsi1";
+ clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>;
+ clock-names = "fck", "sys_clk";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ rfbi: encoder@48050800 {
+ compatible = "ti,omap3-rfbi";
+ reg = <0x48050800 0x100>;
+ status = "disabled";
+ ti,hwmods = "dss_rfbi";
+ clocks = <&dss1_alwon_fck>, <&dss_ick>;
+ clock-names = "fck", "ick";
+ };
+
+ venc: encoder@48050c00 {
+ compatible = "ti,omap3-venc";
+ reg = <0x48050c00 0x100>;
+ status = "disabled";
+ ti,hwmods = "dss_venc";
+ clocks = <&dss_tv_fck>;
+ clock-names = "fck";
+ };
+ };
+
+ ssi: ssi-controller@48058000 {
+ compatible = "ti,omap3-ssi";
+ ti,hwmods = "ssi";
+
+ status = "disabled";
+
+ reg = <0x48058000 0x1000>,
+ <0x48059000 0x1000>;
+ reg-names = "sys",
+ "gdd";
+
+ interrupts = <71>;
+ interrupt-names = "gdd_mpu";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ssi_port1: ssi-port@4805a000 {
+ compatible = "ti,omap3-ssi-port";
+
+ reg = <0x4805a000 0x800>,
+ <0x4805a800 0x800>;
+ reg-names = "tx",
+ "rx";
+
+ interrupts = <67>,
+ <68>;
+ };
+
+ ssi_port2: ssi-port@4805b000 {
+ compatible = "ti,omap3-ssi-port";
+
+ reg = <0x4805b000 0x800>,
+ <0x4805b800 0x800>;
+ reg-names = "tx",
+ "rx";
+
+ interrupts = <69>,
+ <70>;
+ };
+ };
+ };
+};
+
+#include "omap3xxx-clocks.dtsi"
+
+/* Preferred always-on timer for clockevent. Some boards must use dmtimer12 */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&gpt1_fck>;
+ assigned-clock-parents = <&omap_32k_fck>;
+ };
+};
diff --git a/src/arm/ti/omap/omap3430-sdp.dts b/src/arm/ti/omap/omap3430-sdp.dts
new file mode 100644
index 0000000..258ecd9
--- /dev/null
+++ b/src/arm/ti/omap/omap3430-sdp.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+
+/ {
+ model = "TI OMAP3430 SDP";
+ compatible = "ti,omap3430-sdp", "ti,omap3430", "ti,omap3";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ vqmmc-supply = <&vsim>;
+ /*
+ * S6-3 must be in ON position for 8 bit mode to function
+ * Else, use 4 bit mode
+ */
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&gpmc {
+ ranges = <0 0 0x10000000 0x08000000>,
+ <1 0 0x28000000 0x1000000>, /* CS1: 16MB for NAND */
+ <2 0 0x20000000 0x1000000>; /* CS2: 16MB for OneNAND */
+
+ nor@0,0 {
+ compatible = "cfi-flash";
+ linux,mtd-name = "intel,pf48f6000m0y1be";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0 0x08000000>;
+ bank-width = <2>;
+
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <186>;
+ gpmc,cs-wr-off-ns = <186>;
+ gpmc,adv-on-ns = <12>;
+ gpmc,adv-rd-off-ns = <48>;
+ gpmc,adv-wr-off-ns = <48>;
+ gpmc,oe-on-ns = <54>;
+ gpmc,oe-off-ns = <168>;
+ gpmc,we-on-ns = <54>;
+ gpmc,we-off-ns = <168>;
+ gpmc,rd-cycle-ns = <186>;
+ gpmc,wr-cycle-ns = <186>;
+ gpmc,access-ns = <114>;
+ gpmc,page-burst-access-ns = <6>;
+ gpmc,bus-turnaround-ns = <12>;
+ gpmc,cycle2cycle-delay-ns = <18>;
+ gpmc,wr-data-mux-bus-ns = <90>;
+ gpmc,wr-access-ns = <186>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+
+ partition@0 {
+ label = "bootloader-nor";
+ reg = <0 0x40000>;
+ };
+ partition@40000 {
+ label = "params-nor";
+ reg = <0x40000 0x40000>;
+ };
+ partition@80000 {
+ label = "kernel-nor";
+ reg = <0x80000 0x200000>;
+ };
+ partition@280000 {
+ label = "filesystem-nor";
+ reg = <0x240000 0x7d80000>;
+ };
+ };
+
+ nand@1,0 {
+ compatible = "ti,omap2-nand";
+ reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ linux,mtd-name = "micron,mt29f1g08abb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ti,nand-ecc-opt = "sw";
+ nand-bus-width = <8>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <36>;
+ gpmc,cs-wr-off-ns = <36>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <24>;
+ gpmc,adv-wr-off-ns = <36>;
+ gpmc,oe-on-ns = <6>;
+ gpmc,oe-off-ns = <48>;
+ gpmc,we-on-ns = <6>;
+ gpmc,we-off-ns = <30>;
+ gpmc,rd-cycle-ns = <72>;
+ gpmc,wr-cycle-ns = <72>;
+ gpmc,access-ns = <54>;
+ gpmc,wr-access-ns = <30>;
+
+ partition@0 {
+ label = "xloader-nand";
+ reg = <0 0x80000>;
+ };
+ partition@80000 {
+ label = "bootloader-nand";
+ reg = <0x80000 0x140000>;
+ };
+ partition@1c0000 {
+ label = "params-nand";
+ reg = <0x1c0000 0xc0000>;
+ };
+ partition@280000 {
+ label = "kernel-nand";
+ reg = <0x280000 0x500000>;
+ };
+ partition@780000 {
+ label = "filesystem-nand";
+ reg = <0x780000 0x7880000>;
+ };
+ };
+
+ onenand@2,0 {
+ linux,mtd-name = "samsung,kfm2g16q2m-deb8";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ti,omap2-onenand";
+ reg = <2 0 0x20000>; /* CS2, offset 0, IO size 4 */
+
+ gpmc,device-width = <2>;
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <84>;
+ gpmc,cs-wr-off-ns = <72>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <18>;
+ gpmc,adv-wr-off-ns = <18>;
+ gpmc,oe-on-ns = <30>;
+ gpmc,oe-off-ns = <84>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <42>;
+ gpmc,rd-cycle-ns = <108>;
+ gpmc,wr-cycle-ns = <96>;
+ gpmc,access-ns = <78>;
+ gpmc,wr-data-mux-bus-ns = <30>;
+
+ partition@0 {
+ label = "xloader-onenand";
+ reg = <0 0x80000>;
+ };
+ partition@80000 {
+ label = "bootloader-onenand";
+ reg = <0x80000 0x40000>;
+ };
+ partition@c0000 {
+ label = "params-onenand";
+ reg = <0xc0000 0x20000>;
+ };
+ partition@e0000 {
+ label = "kernel-onenand";
+ reg = <0xe0000 0x200000>;
+ };
+ partition@2e0000 {
+ label = "filesystem-onenand";
+ reg = <0x2e0000 0xfd20000>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap3430es1-clocks.dtsi b/src/arm/ti/omap/omap3430es1-clocks.dtsi
new file mode 100644
index 0000000..24adfac
--- /dev/null
+++ b/src/arm/ti/omap/omap3430es1-clocks.dtsi
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP3430 ES1 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&cm_clocks {
+ gfx_l3_ck: gfx_l3_ck@b10 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&l3_ick>;
+ reg = <0x0b10>;
+ ti,bit-shift = <0>;
+ };
+
+ gfx_l3_fck: gfx_l3_fck@b40 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&l3_ick>;
+ ti,max-div = <7>;
+ reg = <0x0b40>;
+ ti,index-starts-at-one;
+ };
+
+ gfx_l3_ick: gfx_l3_ick {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&gfx_l3_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ gfx_cg1_ck: gfx_cg1_ck@b00 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&gfx_l3_fck>;
+ reg = <0x0b00>;
+ ti,bit-shift = <1>;
+ };
+
+ gfx_cg2_ck: gfx_cg2_ck@b00 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&gfx_l3_fck>;
+ reg = <0x0b00>;
+ ti,bit-shift = <2>;
+ };
+
+ clock@a00 {
+ compatible = "ti,clksel";
+ reg = <0xa00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ d2d_26m_fck: clock-d2d-26m-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "d2d_26m_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <3>;
+ };
+
+ fshostusb_fck: clock-fshostusb-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "fshostusb_fck";
+ clocks = <&core_48m_fck>;
+ ti,bit-shift = <5>;
+ };
+
+ ssi_ssr_gate_fck_3430es1: clock-ssi-ssr-gate-fck-3430es1 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "ssi_ssr_gate_fck_3430es1";
+ clocks = <&corex2_fck>;
+ ti,bit-shift = <0>;
+ };
+ };
+
+ clock@a40 {
+ compatible = "ti,clksel";
+ reg = <0xa40>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ ssi_ssr_div_fck_3430es1: clock-ssi-ssr-div-fck-3430es1 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clock-output-names = "ssi_ssr_div_fck_3430es1";
+ clocks = <&corex2_fck>;
+ ti,bit-shift = <8>;
+ ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+ };
+
+ usb_l4_div_ick: clock-usb-l4-div-ick {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clock-output-names = "usb_l4_div_ick";
+ clocks = <&l4_ick>;
+ ti,bit-shift = <4>;
+ ti,max-div = <1>;
+ ti,index-starts-at-one;
+ };
+ };
+
+ ssi_ssr_fck: ssi_ssr_fck_3430es1 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&ssi_ssr_gate_fck_3430es1>, <&ssi_ssr_div_fck_3430es1>;
+ };
+
+ ssi_sst_fck: ssi_sst_fck_3430es1 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&ssi_ssr_fck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ clock@a10 {
+ compatible = "ti,clksel";
+ reg = <0xa10>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ hsotgusb_ick_3430es1: clock-hsotgusb-ick-3430es1 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-no-wait-interface-clock";
+ clock-output-names = "hsotgusb_ick_3430es1";
+ clocks = <&core_l3_ick>;
+ ti,bit-shift = <4>;
+ };
+
+ fac_ick: clock-fac-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "fac_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <8>;
+ };
+
+ ssi_ick: clock-ssi-ick-3430es1 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-no-wait-interface-clock";
+ clock-output-names = "ssi_ick_3430es1";
+ clocks = <&ssi_l4_ick>;
+ ti,bit-shift = <0>;
+ };
+
+ usb_l4_gate_ick: clock-usb-l4-gate-ick {
+ #clock-cells = <0>;
+ compatible = "ti,composite-interface-clock";
+ clock-output-names = "usb_l4_gate_ick";
+ clocks = <&l4_ick>;
+ ti,bit-shift = <5>;
+ };
+ };
+
+ ssi_l4_ick: ssi_l4_ick {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&l4_ick>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ usb_l4_ick: usb_l4_ick {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+ };
+
+ clock@e00 {
+ compatible = "ti,clksel";
+ reg = <0xe00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ dss1_alwon_fck: clock-dss1-alwon-fck-3430es1 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "dss1_alwon_fck_3430es1";
+ clocks = <&dpll4_m4x2_ck>;
+ ti,bit-shift = <0>;
+ ti,set-rate-parent;
+ };
+ };
+
+ dss_ick: dss_ick_3430es1@e10 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-no-wait-interface-clock";
+ clocks = <&l4_ick>;
+ reg = <0x0e10>;
+ ti,bit-shift = <0>;
+ };
+};
+
+&cm_clockdomains {
+ core_l3_clkdm: core_l3_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es1>;
+ };
+
+ gfx_3430es1_clkdm: gfx_3430es1_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&gfx_l3_ck>, <&gfx_cg1_ck>, <&gfx_cg2_ck>;
+ };
+
+ dss_clkdm: dss_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
+ <&dss1_alwon_fck>, <&dss_ick>;
+ };
+
+ d2d_clkdm: d2d_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&d2d_26m_fck>;
+ };
+
+ core_l4_clkdm: core_l4_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+ <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+ <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+ <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+ <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+ <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+ <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+ <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+ <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+ <&fshostusb_fck>, <&fac_ick>, <&ssi_ick>;
+ };
+};
diff --git a/src/arm/ti/omap/omap34xx-omap36xx-clocks.dtsi b/src/arm/ti/omap/omap34xx-omap36xx-clocks.dtsi
new file mode 100644
index 0000000..8374532
--- /dev/null
+++ b/src/arm/ti/omap/omap34xx-omap36xx-clocks.dtsi
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP34XX/OMAP36XX clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&cm_clocks {
+ security_l4_ick2: security_l4_ick2 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&l4_ick>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ clock@a14 {
+ compatible = "ti,clksel";
+ reg = <0xa14>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ aes1_ick: clock-aes1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "aes1_ick";
+ clocks = <&security_l4_ick2>;
+ ti,bit-shift = <3>;
+ };
+
+ rng_ick: clock-rng-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "rng_ick";
+ clocks = <&security_l4_ick2>;
+ ti,bit-shift = <2>;
+ };
+
+ sha11_ick: clock-sha11-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "sha11_ick";
+ clocks = <&security_l4_ick2>;
+ ti,bit-shift = <1>;
+ };
+
+ des1_ick: clock-des1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "des1_ick";
+ clocks = <&security_l4_ick2>;
+ ti,bit-shift = <0>;
+ };
+
+ pka_ick: clock-pka-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "pka_ick";
+ clocks = <&security_l3_ick>;
+ ti,bit-shift = <4>;
+ };
+ };
+
+ /* CM_FCLKEN_CAM */
+ clock@f00 {
+ compatible = "ti,clksel";
+ reg = <0xf00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ cam_mclk: clock-cam-mclk {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "cam_mclk";
+ clocks = <&dpll4_m5x2_ck>;
+ ti,bit-shift = <0>;
+ ti,set-rate-parent;
+ };
+
+ csi2_96m_fck: clock-csi2-96m-fck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "csi2_96m_fck";
+ clocks = <&core_96m_fck>;
+ ti,bit-shift = <1>;
+ };
+ };
+
+ cam_ick: cam_ick@f10 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-no-wait-interface-clock";
+ clocks = <&l4_ick>;
+ reg = <0x0f10>;
+ ti,bit-shift = <0>;
+ };
+
+ security_l3_ick: security_l3_ick {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&l3_ick>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ clock@a10 {
+ compatible = "ti,clksel";
+ reg = <0xa10>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ icr_ick: clock-icr-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "icr_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <29>;
+ };
+
+ des2_ick: clock-des2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "des2_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <26>;
+ };
+
+ mspro_ick: clock-mspro-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mspro_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <23>;
+ };
+
+ mailboxes_ick: clock-mailboxes-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mailboxes_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <7>;
+ };
+
+ sad2d_ick: clock-sad2d-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "sad2d_ick";
+ clocks = <&l3_ick>;
+ ti,bit-shift = <3>;
+ };
+ };
+
+ ssi_l4_ick: ssi_l4_ick {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&l4_ick>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ clock@c00 {
+ compatible = "ti,clksel";
+ reg = <0xc00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ sr1_fck: clock-sr1-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "sr1_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <6>;
+ };
+
+ sr2_fck: clock-sr2-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "sr2_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <7>;
+ };
+ };
+
+ sr_l4_ick: sr_l4_ick {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&l4_ick>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll2_fck: dpll2_fck@40 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&core_ck>;
+ ti,bit-shift = <19>;
+ ti,max-div = <7>;
+ reg = <0x0040>;
+ ti,index-starts-at-one;
+ };
+
+ dpll2_ck: dpll2_ck@4 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-dpll-clock";
+ clocks = <&sys_ck>, <&dpll2_fck>;
+ reg = <0x0004>, <0x0024>, <0x0040>, <0x0034>;
+ ti,low-power-stop;
+ ti,lock;
+ ti,low-power-bypass;
+ };
+
+ dpll2_m2_ck: dpll2_m2_ck@44 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&dpll2_ck>;
+ ti,max-div = <31>;
+ reg = <0x0044>;
+ ti,index-starts-at-one;
+ };
+
+ iva2_ck: iva2_ck@0 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&dpll2_m2_ck>;
+ reg = <0x0000>;
+ ti,bit-shift = <0>;
+ };
+
+ clock@a00 {
+ compatible = "ti,clksel";
+ reg = <0xa00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ modem_fck: clock-modem-fck {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "modem_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <31>;
+ };
+
+ mspro_fck: clock-mspro-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "mspro_fck";
+ clocks = <&core_96m_fck>;
+ ti,bit-shift = <23>;
+ };
+ };
+
+ /* CM_ICLKEN3_CORE */
+ clock@a18 {
+ compatible = "ti,clksel";
+ reg = <0xa18>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ mad2d_ick: clock-mad2d-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mad2d_ick";
+ clocks = <&l3_ick>;
+ ti,bit-shift = <3>;
+ };
+ };
+
+};
+
+&cm_clockdomains {
+ cam_clkdm: cam_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&cam_ick>, <&csi2_96m_fck>;
+ };
+
+ iva2_clkdm: iva2_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&iva2_ck>;
+ };
+
+ dpll2_clkdm: dpll2_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&dpll2_ck>;
+ };
+
+ wkup_clkdm: wkup_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+ <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+ <&gpt1_ick>, <&sr1_fck>, <&sr2_fck>;
+ };
+
+ d2d_clkdm: d2d_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&modem_fck>, <&sad2d_ick>, <&mad2d_ick>;
+ };
+
+ core_l4_clkdm: core_l4_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+ <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+ <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+ <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+ <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+ <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+ <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+ <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+ <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>, <&icr_ick>,
+ <&des2_ick>, <&mspro_ick>, <&mailboxes_ick>,
+ <&rng_ick>, <&mspro_fck>;
+ };
+};
diff --git a/src/arm/ti/omap/omap34xx.dtsi b/src/arm/ti/omap/omap34xx.dtsi
new file mode 100644
index 0000000..fc7233a
--- /dev/null
+++ b/src/arm/ti/omap/omap34xx.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP34xx/OMAP35xx SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/media/omap3-isp.h>
+
+#include "omap3.dtsi"
+
+/ {
+ cpus {
+ cpu: cpu@0 {
+ /* OMAP343x/OMAP35xx variants OPP1-6 */
+ operating-points-v2 = <&cpu0_opp_table>;
+
+ clock-latency = <300000>; /* From legacy driver */
+ #cooling-cells = <2>;
+ };
+ };
+
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ syscon = <&scm_conf>;
+
+ opp-125000000 {
+ opp-hz = /bits/ 64 <125000000>;
+ /*
+ * we currently only select the max voltage from table
+ * Table 3-3 of the omap3530 Data sheet (SPRS507F).
+ * Format is: <target min max>
+ */
+ opp-microvolt = <975000 975000 975000>;
+ /*
+ * first value is silicon revision bit mask
+ * second one 720MHz Device Identification bit mask
+ */
+ opp-supported-hw = <0xffffffff 3>;
+ };
+
+ opp-250000000 {
+ opp-hz = /bits/ 64 <250000000>;
+ opp-microvolt = <1075000 1075000 1075000>;
+ opp-supported-hw = <0xffffffff 3>;
+ opp-suspend;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <1200000 1200000 1200000>;
+ opp-supported-hw = <0xffffffff 3>;
+ };
+
+ opp-550000000 {
+ opp-hz = /bits/ 64 <550000000>;
+ opp-microvolt = <1275000 1275000 1275000>;
+ opp-supported-hw = <0xffffffff 3>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1350000 1350000 1350000>;
+ opp-supported-hw = <0xffffffff 3>;
+ };
+
+ opp-720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <1350000 1350000 1350000>;
+ /* only high-speed grade omap3530 devices */
+ opp-supported-hw = <0xffffffff 2>;
+ turbo-mode;
+ };
+ };
+
+ ocp@68000000 {
+ omap3_pmx_core2: pinmux@480025d8 {
+ compatible = "ti,omap3-padconf", "pinctrl-single";
+ reg = <0x480025d8 0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
+
+ isp: isp@480bc000 {
+ compatible = "ti,omap3-isp";
+ reg = <0x480bc000 0x12fc
+ 0x480bd800 0x017c>;
+ interrupts = <24>;
+ iommus = <&mmu_isp>;
+ syscon = <&scm_conf 0x6c>;
+ ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
+ #clock-cells = <1>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ bandgap: bandgap@48002524 {
+ reg = <0x48002524 0x4>;
+ compatible = "ti,omap34xx-bandgap";
+ #thermal-sensor-cells = <0>;
+ };
+
+ target-module@480cb000 {
+ compatible = "ti,sysc-omap3430-sr", "ti,sysc";
+ ti,hwmods = "smartreflex_core";
+ reg = <0x480cb024 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <SYSC_OMAP2_CLOCKACTIVITY>;
+ clocks = <&sr2_fck>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x480cb000 0x001000>;
+
+ smartreflex_core: smartreflex@0 {
+ compatible = "ti,omap3-smartreflex-core";
+ reg = <0 0x400>;
+ interrupts = <19>;
+ };
+ };
+
+ target-module@480c9000 {
+ compatible = "ti,sysc-omap3430-sr", "ti,sysc";
+ ti,hwmods = "smartreflex_mpu_iva";
+ reg = <0x480c9024 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <SYSC_OMAP2_CLOCKACTIVITY>;
+ clocks = <&sr1_fck>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x480c9000 0x001000>;
+
+ smartreflex_mpu_iva: smartreflex@480c9000 {
+ compatible = "ti,omap3-smartreflex-mpu-iva";
+ reg = <0 0x400>;
+ interrupts = <18>;
+ };
+ };
+
+ /*
+ * On omap34xx the OCP registers do not seem to be accessible
+ * at all unlike on 36xx. Maybe SGX is permanently set to
+ * "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is
+ * write-only at 0x50000e10. We detect SGX based on the SGX
+ * revision register instead of the unreadable OCP revision
+ * register. Also note that on early 34xx es1 revision there
+ * are also different clocks, but we do not have any dts users
+ * for it.
+ */
+ sgx_module: target-module@50000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x50000014 0x4>;
+ reg-names = "rev";
+ clocks = <&sgx_fck>, <&sgx_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x50000000 0x4000>;
+
+ /*
+ * Closed source PowerVR driver, no child device
+ * binding or driver in mainline
+ */
+ };
+ };
+
+ thermal_zones: thermal-zones {
+ #include "omap3-cpu-thermal.dtsi"
+ };
+};
+
+&ssi {
+ status = "okay";
+
+ clocks = <&ssi_ssr_fck>,
+ <&ssi_sst_fck>,
+ <&ssi_ick>;
+ clock-names = "ssi_ssr_fck",
+ "ssi_sst_fck",
+ "ssi_ick";
+};
+
+&usb_otg_target {
+ clocks = <&hsotgusb_ick_3430es2>;
+};
+
+/include/ "omap34xx-omap36xx-clocks.dtsi"
+/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/src/arm/ti/omap/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/src/arm/ti/omap/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
new file mode 100644
index 0000000..dcc5cfc
--- /dev/null
+++ b/src/arm/ti/omap/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP36xx/AM35xx/OMAP34xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&prm_clocks {
+ corex2_d3_fck: corex2_d3_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&corex2_fck>;
+ clock-mult = <1>;
+ clock-div = <3>;
+ };
+
+ corex2_d5_fck: corex2_d5_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&corex2_fck>;
+ clock-mult = <1>;
+ clock-div = <5>;
+ };
+};
+&cm_clocks {
+ dpll5_ck: dpll5_ck@d04 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-dpll-clock";
+ clocks = <&sys_ck>, <&sys_ck>;
+ reg = <0x0d04>, <0x0d24>, <0x0d4c>, <0x0d34>;
+ ti,low-power-stop;
+ ti,lock;
+ };
+
+ dpll5_m2_ck: dpll5_m2_ck@d50 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&dpll5_ck>;
+ ti,max-div = <31>;
+ reg = <0x0d50>;
+ ti,index-starts-at-one;
+ };
+
+ sgx_gate_fck: sgx_gate_fck@b00 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&core_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0b00>;
+ };
+
+ core_d3_ck: core_d3_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&core_ck>;
+ clock-mult = <1>;
+ clock-div = <3>;
+ };
+
+ core_d4_ck: core_d4_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&core_ck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ core_d6_ck: core_d6_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&core_ck>;
+ clock-mult = <1>;
+ clock-div = <6>;
+ };
+
+ omap_192m_alwon_fck: omap_192m_alwon_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll4_m2x2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ core_d2_ck: core_d2_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&core_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ sgx_mux_fck: sgx_mux_fck@b40 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&core_d3_ck>, <&core_d4_ck>, <&core_d6_ck>, <&cm_96m_fck>, <&omap_192m_alwon_fck>, <&core_d2_ck>, <&corex2_d3_fck>, <&corex2_d5_fck>;
+ reg = <0x0b40>;
+ };
+
+ sgx_fck: sgx_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&sgx_gate_fck>, <&sgx_mux_fck>;
+ };
+
+ sgx_ick: sgx_ick@b10 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&l3_ick>;
+ reg = <0x0b10>;
+ ti,bit-shift = <0>;
+ };
+
+ cpefuse_fck: cpefuse_fck@a08 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&sys_ck>;
+ reg = <0x0a08>;
+ ti,bit-shift = <0>;
+ };
+
+ ts_fck: ts_fck@a08 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&omap_32k_fck>;
+ reg = <0x0a08>;
+ ti,bit-shift = <1>;
+ };
+
+ usbtll_fck: usbtll_fck@a08 {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&dpll5_m2_ck>;
+ reg = <0x0a08>;
+ ti,bit-shift = <2>;
+ };
+
+ /* CM_ICLKEN3_CORE */
+ clock@a18 {
+ compatible = "ti,clksel";
+ reg = <0xa18>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ usbtll_ick: clock-usbtll-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "usbtll_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <2>;
+ };
+ };
+
+ clock@a10 {
+ compatible = "ti,clksel";
+ reg = <0xa10>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ mmchs3_ick: clock-mmchs3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mmchs3_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <30>;
+ };
+ };
+
+ clock@a00 {
+ compatible = "ti,clksel";
+ reg = <0xa00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ mmchs3_fck: clock-mmchs3-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "mmchs3_fck";
+ clocks = <&core_96m_fck>;
+ ti,bit-shift = <30>;
+ };
+ };
+
+ clock@e00 {
+ compatible = "ti,clksel";
+ reg = <0xe00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ dss1_alwon_fck: clock-dss1-alwon-fck-3430es2 {
+ #clock-cells = <0>;
+ compatible = "ti,dss-gate-clock";
+ clock-output-names = "dss1_alwon_fck_3430es2";
+ clocks = <&dpll4_m4x2_ck>;
+ ti,bit-shift = <0>;
+ ti,set-rate-parent;
+ };
+ };
+
+ dss_ick: dss_ick_3430es2@e10 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-dss-interface-clock";
+ clocks = <&l4_ick>;
+ reg = <0x0e10>;
+ ti,bit-shift = <0>;
+ };
+
+ usbhost_120m_fck: usbhost_120m_fck@1400 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&dpll5_m2_ck>;
+ reg = <0x1400>;
+ ti,bit-shift = <1>;
+ };
+
+ usbhost_48m_fck: usbhost_48m_fck@1400 {
+ #clock-cells = <0>;
+ compatible = "ti,dss-gate-clock";
+ clocks = <&omap_48m_fck>;
+ reg = <0x1400>;
+ ti,bit-shift = <0>;
+ };
+
+ usbhost_ick: usbhost_ick@1410 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-dss-interface-clock";
+ clocks = <&l4_ick>;
+ reg = <0x1410>;
+ ti,bit-shift = <0>;
+ };
+};
+
+&cm_clockdomains {
+ dpll5_clkdm: dpll5_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&dpll5_ck>;
+ };
+
+ sgx_clkdm: sgx_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&sgx_ick>;
+ };
+
+ dss_clkdm: dss_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
+ <&dss1_alwon_fck>, <&dss_ick>;
+ };
+
+ core_l4_clkdm: core_l4_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+ <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+ <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+ <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+ <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+ <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+ <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+ <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+ <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+ <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+ <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>;
+ };
+
+ usbhost_clkdm: usbhost_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&usbhost_120m_fck>, <&usbhost_48m_fck>,
+ <&usbhost_ick>;
+ };
+};
diff --git a/src/arm/ti/omap/omap36xx-clocks.dtsi b/src/arm/ti/omap/omap36xx-clocks.dtsi
new file mode 100644
index 0000000..c5fdb2b
--- /dev/null
+++ b/src/arm/ti/omap/omap36xx-clocks.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP36xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&cm_clocks {
+ dpll4_ck: dpll4_ck@d00 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-dpll-per-j-type-clock";
+ clocks = <&sys_ck>, <&sys_ck>;
+ reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
+ };
+
+ dpll4_m5x2_ck: dpll4_m5x2_ck@d00 {
+ #clock-cells = <0>;
+ compatible = "ti,hsdiv-gate-clock";
+ clocks = <&dpll4_m5x2_mul_ck>;
+ ti,bit-shift = <0x1e>;
+ reg = <0x0d00>;
+ ti,set-rate-parent;
+ ti,set-bit-to-disable;
+ };
+
+ dpll4_m2x2_ck: dpll4_m2x2_ck@d00 {
+ #clock-cells = <0>;
+ compatible = "ti,hsdiv-gate-clock";
+ clocks = <&dpll4_m2x2_mul_ck>;
+ ti,bit-shift = <0x1b>;
+ reg = <0x0d00>;
+ ti,set-bit-to-disable;
+ };
+
+ dpll3_m3x2_ck: dpll3_m3x2_ck@d00 {
+ #clock-cells = <0>;
+ compatible = "ti,hsdiv-gate-clock";
+ clocks = <&dpll3_m3x2_mul_ck>;
+ ti,bit-shift = <0xc>;
+ reg = <0x0d00>;
+ ti,set-bit-to-disable;
+ };
+
+ dpll4_m3x2_ck: dpll4_m3x2_ck@d00 {
+ #clock-cells = <0>;
+ compatible = "ti,hsdiv-gate-clock";
+ clocks = <&dpll4_m3x2_mul_ck>;
+ ti,bit-shift = <0x1c>;
+ reg = <0x0d00>;
+ ti,set-bit-to-disable;
+ };
+
+ dpll4_m6x2_ck: dpll4_m6x2_ck@d00 {
+ #clock-cells = <0>;
+ compatible = "ti,hsdiv-gate-clock";
+ clocks = <&dpll4_m6x2_mul_ck>;
+ ti,bit-shift = <0x1f>;
+ reg = <0x0d00>;
+ ti,set-bit-to-disable;
+ };
+
+ clock@1000 {
+ compatible = "ti,clksel";
+ reg = <0x1000>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ uart4_fck: clock-uart4-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "uart4_fck";
+ clocks = <&per_48m_fck>;
+ ti,bit-shift = <18>;
+ };
+ };
+};
+
+&dpll4_m2x2_mul_ck {
+ clock-mult = <1>;
+};
+
+&dpll4_m3x2_mul_ck {
+ clock-mult = <1>;
+};
+
+&dpll4_m4x2_mul_ck {
+ ti,clock-mult = <1>;
+};
+
+&dpll4_m5x2_mul_ck {
+ ti,clock-mult = <1>;
+};
+
+&dpll4_m6x2_mul_ck {
+ clock-mult = <1>;
+};
+
+&cm_clockdomains {
+ dpll4_clkdm: dpll4_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&dpll4_ck>;
+ };
+
+ per_clkdm: per_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
+ <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
+ <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
+ <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
+ <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
+ <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
+ <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+ <&mcbsp4_ick>, <&uart4_fck>;
+ };
+};
+
+&dpll4_m4_ck {
+ ti,max-div = <31>;
+};
diff --git a/src/arm/ti/omap/omap36xx-omap3430es2plus-clocks.dtsi b/src/arm/ti/omap/omap36xx-omap3430es2plus-clocks.dtsi
new file mode 100644
index 0000000..c94eb86
--- /dev/null
+++ b/src/arm/ti/omap/omap36xx-omap3430es2plus-clocks.dtsi
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP34xx/OMAP36xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&cm_clocks {
+ clock@a00 {
+ compatible = "ti,clksel";
+ reg = <0xa00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ ssi_ssr_gate_fck_3430es2: clock-ssi-ssr-gate-fck-3430es2 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "ssi_ssr_gate_fck_3430es2";
+ clocks = <&corex2_fck>;
+ ti,bit-shift = <0>;
+ };
+ };
+
+ clock@a40 {
+ compatible = "ti,clksel";
+ reg = <0xa40>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ ssi_ssr_div_fck_3430es2: clock-ssi-ssr-div-fck-3430es2 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clock-output-names = "ssi_ssr_div_fck_3430es2";
+ clocks = <&corex2_fck>;
+ ti,bit-shift = <8>;
+ ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+ };
+ };
+
+ ssi_ssr_fck: ssi_ssr_fck_3430es2 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&ssi_ssr_gate_fck_3430es2>, <&ssi_ssr_div_fck_3430es2>;
+ };
+
+ ssi_sst_fck: ssi_sst_fck_3430es2 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&ssi_ssr_fck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ clock@a10 {
+ compatible = "ti,clksel";
+ reg = <0xa10>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ hsotgusb_ick_3430es2: clock-hsotgusb-ick-3430es2 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-hsotgusb-interface-clock";
+ clock-output-names = "hsotgusb_ick_3430es2";
+ clocks = <&core_l3_ick>;
+ ti,bit-shift = <4>;
+ };
+
+ ssi_ick: clock-ssi-ick-3430es2 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-ssi-interface-clock";
+ clock-output-names = "ssi_ick_3430es2";
+ clocks = <&ssi_l4_ick>;
+ ti,bit-shift = <0>;
+ };
+ };
+
+ ssi_l4_ick: ssi_l4_ick {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&l4_ick>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ clock@c00 {
+ compatible = "ti,clksel";
+ reg = <0xc00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ usim_gate_fck: clock-usim-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "usim_gate_fck";
+ clocks = <&omap_96m_fck>;
+ ti,bit-shift = <9>;
+ };
+ };
+
+ sys_d2_ck: sys_d2_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&sys_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ omap_96m_d2_fck: omap_96m_d2_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&omap_96m_fck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ omap_96m_d4_fck: omap_96m_d4_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&omap_96m_fck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ omap_96m_d8_fck: omap_96m_d8_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&omap_96m_fck>;
+ clock-mult = <1>;
+ clock-div = <8>;
+ };
+
+ omap_96m_d10_fck: omap_96m_d10_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&omap_96m_fck>;
+ clock-mult = <1>;
+ clock-div = <10>;
+ };
+
+ dpll5_m2_d4_ck: dpll5_m2_d4_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll5_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ dpll5_m2_d8_ck: dpll5_m2_d8_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll5_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <8>;
+ };
+
+ dpll5_m2_d16_ck: dpll5_m2_d16_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll5_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <16>;
+ };
+
+ dpll5_m2_d20_ck: dpll5_m2_d20_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll5_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <20>;
+ };
+
+ clock@c40 {
+ compatible = "ti,clksel";
+ reg = <0xc40>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ usim_mux_fck: clock-usim-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "usim_mux_fck";
+ clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
+ ti,bit-shift = <3>;
+ ti,index-starts-at-one;
+ };
+ };
+
+ usim_fck: usim_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&usim_gate_fck>, <&usim_mux_fck>;
+ };
+
+ clock@c10 {
+ compatible = "ti,clksel";
+ reg = <0xc10>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ usim_ick: clock-usim-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "usim_ick";
+ clocks = <&wkup_l4_ick>;
+ ti,bit-shift = <9>;
+ };
+ };
+};
+
+&cm_clockdomains {
+ core_l3_clkdm: core_l3_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es2>;
+ };
+
+ wkup_clkdm: wkup_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+ <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+ <&gpt1_ick>, <&usim_ick>;
+ };
+
+ core_l4_clkdm: core_l4_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+ <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
+ <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+ <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+ <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+ <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+ <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+ <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+ <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+ <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+ <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+ <&ssi_ick>;
+ };
+};
diff --git a/src/arm/ti/omap/omap36xx.dtsi b/src/arm/ti/omap/omap36xx.dtsi
new file mode 100644
index 0000000..e6d8070
--- /dev/null
+++ b/src/arm/ti/omap/omap36xx.dtsi
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/media/omap3-isp.h>
+
+#include "omap3.dtsi"
+
+/ {
+ aliases {
+ serial3 = &uart4;
+ };
+
+ cpus {
+ /* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */
+ cpu: cpu@0 {
+ operating-points-v2 = <&cpu0_opp_table>;
+
+ vbb-supply = <&abb_mpu_iva>;
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+ #cooling-cells = <2>;
+ };
+ };
+
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ syscon = <&scm_conf>;
+
+ opp-50-300000000 {
+ /* OPP50 */
+ opp-hz = /bits/ 64 <300000000>;
+ /*
+ * we currently only select the max voltage from table
+ * Table 4-19 of the DM3730 Data sheet (SPRS685B)
+ * Format is: cpu0-supply: <target min max>
+ * vbb-supply: <target min max>
+ */
+ opp-microvolt = <1012500 1012500 1012500>,
+ <1012500 1012500 1012500>;
+ /*
+ * first value is silicon revision bit mask
+ * second one is "speed binned" bit mask
+ */
+ opp-supported-hw = <0xffffffff 3>;
+ opp-suspend;
+ };
+
+ opp-100-600000000 {
+ /* OPP100 */
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1200000 1200000 1200000>,
+ <1200000 1200000 1200000>;
+ opp-supported-hw = <0xffffffff 3>;
+ };
+
+ opp-130-800000000 {
+ /* OPP130 */
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1325000 1325000 1325000>,
+ <1325000 1325000 1325000>;
+ opp-supported-hw = <0xffffffff 3>;
+ };
+
+ opp-1000000000 {
+ /* OPP1G */
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1375000 1375000 1375000>,
+ <1375000 1375000 1375000>;
+ /* only on am/dm37x with speed-binned bit set */
+ opp-supported-hw = <0xffffffff 2>;
+ };
+ };
+
+ opp_supply_mpu_iva: opp-supply {
+ compatible = "ti,omap-opp-supply";
+ ti,absolute-max-voltage-uv = <1375000>;
+ };
+
+ ocp@68000000 {
+ uart4: serial@49042000 {
+ compatible = "ti,omap3-uart";
+ reg = <0x49042000 0x400>;
+ interrupts = <80>;
+ dmas = <&sdma 81 &sdma 82>;
+ dma-names = "tx", "rx";
+ ti,hwmods = "uart4";
+ clock-frequency = <48000000>;
+ };
+
+ abb_mpu_iva: regulator-abb-mpu {
+ compatible = "ti,abb-v1";
+ regulator-name = "abb_mpu_iva";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ reg = <0x483072f0 0x8>, <0x48306818 0x4>;
+ reg-names = "base-address", "int-address";
+ ti,tranxdone-status-mask = <0x4000000>;
+ clocks = <&sys_ck>;
+ ti,settling-time = <30>;
+ ti,clock-cycles = <8>;
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1012500 0 0 0 0 0
+ 1200000 0 0 0 0 0
+ 1325000 0 0 0 0 0
+ 1375000 1 0 0 0 0
+ >;
+ };
+
+ omap3_pmx_core2: pinmux@480025a0 {
+ compatible = "ti,omap3-padconf", "pinctrl-single";
+ reg = <0x480025a0 0x5c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
+
+ isp: isp@480bc000 {
+ compatible = "ti,omap3-isp";
+ reg = <0x480bc000 0x12fc
+ 0x480bd800 0x0600>;
+ interrupts = <24>;
+ iommus = <&mmu_isp>;
+ syscon = <&scm_conf 0x2f0>;
+ ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
+ #clock-cells = <1>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ bandgap: bandgap@48002524 {
+ reg = <0x48002524 0x4>;
+ compatible = "ti,omap36xx-bandgap";
+ #thermal-sensor-cells = <0>;
+ };
+
+ target-module@480cb000 {
+ compatible = "ti,sysc-omap3630-sr", "ti,sysc";
+ ti,hwmods = "smartreflex_core";
+ reg = <0x480cb038 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&sr2_fck>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x480cb000 0x001000>;
+
+ smartreflex_core: smartreflex@0 {
+ compatible = "ti,omap3-smartreflex-core";
+ reg = <0 0x400>;
+ interrupts = <19>;
+ };
+ };
+
+ target-module@480c9000 {
+ compatible = "ti,sysc-omap3630-sr", "ti,sysc";
+ ti,hwmods = "smartreflex_mpu_iva";
+ reg = <0x480c9038 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&sr1_fck>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x480c9000 0x001000>;
+
+
+ smartreflex_mpu_iva: smartreflex@480c9000 {
+ compatible = "ti,omap3-smartreflex-mpu-iva";
+ reg = <0 0x400>;
+ interrupts = <18>;
+ };
+ };
+
+ /*
+ * Note that the sysconfig register layout is a subset of the
+ * "ti,sysc-omap4" type register with just sidle and midle bits
+ * available while omap34xx has "ti,sysc-omap2" type sysconfig.
+ */
+ sgx_module: target-module@50000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x5000fe00 0x4>,
+ <0x5000fe10 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&sgx_fck>, <&sgx_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x50000000 0x2000000>;
+
+ /*
+ * Closed source PowerVR driver, no child device
+ * binding or driver in mainline
+ */
+ };
+ };
+
+ thermal_zones: thermal-zones {
+ #include "omap3-cpu-thermal.dtsi"
+ };
+};
+
+&sdma {
+ compatible = "ti,omap3630-sdma", "ti,omap-sdma";
+};
+
+/* OMAP3630 needs dss_96m_fck for VENC */
+&venc {
+ clocks = <&dss_tv_fck>, <&dss_96m_fck>;
+ clock-names = "fck", "tv_dac_clk";
+};
+
+&ssi {
+ status = "okay";
+
+ clocks = <&ssi_ssr_fck>,
+ <&ssi_sst_fck>,
+ <&ssi_ick>;
+ clock-names = "ssi_ssr_fck",
+ "ssi_sst_fck",
+ "ssi_ick";
+};
+
+&usb_otg_target {
+ clocks = <&hsotgusb_ick_3430es2>;
+};
+
+/include/ "omap34xx-omap36xx-clocks.dtsi"
+/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-clocks.dtsi"
diff --git a/src/arm/ti/omap/omap3xxx-clocks.dtsi b/src/arm/ti/omap/omap3xxx-clocks.dtsi
new file mode 100644
index 0000000..2e13ca1
--- /dev/null
+++ b/src/arm/ti/omap/omap3xxx-clocks.dtsi
@@ -0,0 +1,1790 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP3 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&prm_clocks {
+ virt_16_8m_ck: virt_16_8m_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <16800000>;
+ };
+
+ osc_sys_ck: osc_sys_ck@d40 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&virt_12m_ck>, <&virt_13m_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_38_4m_ck>, <&virt_16_8m_ck>;
+ reg = <0x0d40>;
+ };
+
+ sys_ck: sys_ck@1270 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&osc_sys_ck>;
+ ti,bit-shift = <6>;
+ ti,max-div = <3>;
+ reg = <0x1270>;
+ ti,index-starts-at-one;
+ };
+
+ sys_clkout1: sys_clkout1@d70 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&osc_sys_ck>;
+ reg = <0x0d70>;
+ ti,bit-shift = <7>;
+ };
+
+ dpll3_x2_ck: dpll3_x2_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll3_ck>;
+ clock-mult = <2>;
+ clock-div = <1>;
+ };
+
+ dpll3_m2x2_ck: dpll3_m2x2_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll3_m2_ck>;
+ clock-mult = <2>;
+ clock-div = <1>;
+ };
+
+ dpll4_x2_ck: dpll4_x2_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll4_ck>;
+ clock-mult = <2>;
+ clock-div = <1>;
+ };
+
+ corex2_fck: corex2_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll3_m2x2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ wkup_l4_ick: wkup_l4_ick {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&sys_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+};
+
+&scm_clocks {
+ /* CONTROL_DEVCONF1 */
+ clock@68 {
+ compatible = "ti,clksel";
+ reg = <0x68>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ mcbsp5_mux_fck: clock-mcbsp5-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "mcbsp5_mux_fck";
+ clocks = <&core_96m_fck>, <&mcbsp_clks>;
+ ti,bit-shift = <4>;
+ };
+
+ mcbsp3_mux_fck: clock-mcbsp3-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "mcbsp3_mux_fck";
+ clocks = <&per_96m_fck>, <&mcbsp_clks>;
+ };
+
+ mcbsp4_mux_fck: clock-mcbsp4-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "mcbsp4_mux_fck";
+ clocks = <&per_96m_fck>, <&mcbsp_clks>;
+ ti,bit-shift = <2>;
+ };
+ };
+
+ mcbsp5_fck: mcbsp5_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
+ };
+
+ /* CONTROL_DEVCONF0 */
+ clock@4 {
+ compatible = "ti,clksel";
+ reg = <0x4>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ mcbsp1_mux_fck: clock-mcbsp1-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "mcbsp1_mux_fck";
+ clocks = <&core_96m_fck>, <&mcbsp_clks>;
+ ti,bit-shift = <2>;
+ };
+
+ mcbsp2_mux_fck: clock-mcbsp2-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "mcbsp2_mux_fck";
+ clocks = <&per_96m_fck>, <&mcbsp_clks>;
+ ti,bit-shift = <6>;
+ };
+ };
+
+ mcbsp1_fck: mcbsp1_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
+ };
+
+ mcbsp2_fck: mcbsp2_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
+ };
+
+ mcbsp3_fck: mcbsp3_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
+ };
+
+ mcbsp4_fck: mcbsp4_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
+ };
+};
+&cm_clocks {
+ dummy_apb_pclk: dummy_apb_pclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0x0>;
+ };
+
+ omap_32k_fck: omap_32k_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ virt_12m_ck: virt_12m_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+
+ virt_13m_ck: virt_13m_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ };
+
+ virt_19200000_ck: virt_19200000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <19200000>;
+ };
+
+ virt_26000000_ck: virt_26000000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+
+ virt_38_4m_ck: virt_38_4m_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <38400000>;
+ };
+
+ dpll4_ck: dpll4_ck@d00 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-dpll-per-clock";
+ clocks = <&sys_ck>, <&sys_ck>;
+ reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
+ };
+
+ dpll4_m2_ck: dpll4_m2_ck@d48 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&dpll4_ck>;
+ ti,max-div = <63>;
+ reg = <0x0d48>;
+ ti,index-starts-at-one;
+ };
+
+ dpll4_m2x2_mul_ck: dpll4_m2x2_mul_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll4_m2_ck>;
+ clock-mult = <2>;
+ clock-div = <1>;
+ };
+
+ dpll4_m2x2_ck: dpll4_m2x2_ck@d00 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&dpll4_m2x2_mul_ck>;
+ ti,bit-shift = <0x1b>;
+ reg = <0x0d00>;
+ ti,set-bit-to-disable;
+ };
+
+ omap_96m_alwon_fck: omap_96m_alwon_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll4_m2x2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll3_ck: dpll3_ck@d00 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-dpll-core-clock";
+ clocks = <&sys_ck>, <&sys_ck>;
+ reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>;
+ };
+
+ /* CM_CLKSEL1_EMU */
+ clock@1140 {
+ compatible = "ti,clksel";
+ reg = <0x1140>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ dpll3_m3_ck: clock-dpll3-m3 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll3_m3_ck";
+ clocks = <&dpll3_ck>;
+ ti,bit-shift = <16>;
+ ti,max-div = <31>;
+ ti,index-starts-at-one;
+ };
+
+ dpll4_m6_ck: clock-dpll4-m6 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll4_m6_ck";
+ clocks = <&dpll4_ck>;
+ ti,bit-shift = <24>;
+ ti,max-div = <63>;
+ ti,index-starts-at-one;
+ };
+
+ emu_src_mux_ck: clock-emu-src-mux {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "emu_src_mux_ck";
+ clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+ };
+
+ pclk_fck: clock-pclk-fck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "pclk_fck";
+ clocks = <&emu_src_ck>;
+ ti,bit-shift = <8>;
+ ti,max-div = <7>;
+ ti,index-starts-at-one;
+ };
+
+ pclkx2_fck: clock-pclkx2-fck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "pclkx2_fck";
+ clocks = <&emu_src_ck>;
+ ti,bit-shift = <6>;
+ ti,max-div = <3>;
+ ti,index-starts-at-one;
+ };
+
+ atclk_fck: clock-atclk-fck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "atclk_fck";
+ clocks = <&emu_src_ck>;
+ ti,bit-shift = <4>;
+ ti,max-div = <3>;
+ ti,index-starts-at-one;
+ };
+
+ traceclk_src_fck: clock-traceclk-src-fck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "traceclk_src_fck";
+ clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+ ti,bit-shift = <2>;
+ };
+
+ traceclk_fck: clock-traceclk-fck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "traceclk_fck";
+ clocks = <&traceclk_src_fck>;
+ ti,bit-shift = <11>;
+ ti,max-div = <7>;
+ ti,index-starts-at-one;
+ };
+ };
+
+ dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll3_m3_ck>;
+ clock-mult = <2>;
+ clock-div = <1>;
+ };
+
+ dpll3_m3x2_ck: dpll3_m3x2_ck@d00 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&dpll3_m3x2_mul_ck>;
+ ti,bit-shift = <0xc>;
+ reg = <0x0d00>;
+ ti,set-bit-to-disable;
+ };
+
+ emu_core_alwon_ck: emu_core_alwon_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll3_m3x2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ sys_altclk: sys_altclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0x0>;
+ };
+
+ mcbsp_clks: mcbsp_clks {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0x0>;
+ };
+
+ core_ck: core_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll3_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll1_fck: dpll1_fck@940 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&core_ck>;
+ ti,bit-shift = <19>;
+ ti,max-div = <7>;
+ reg = <0x0940>;
+ ti,index-starts-at-one;
+ };
+
+ dpll1_ck: dpll1_ck@904 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-dpll-clock";
+ clocks = <&sys_ck>, <&dpll1_fck>;
+ reg = <0x0904>, <0x0924>, <0x0940>, <0x0934>;
+ };
+
+ dpll1_x2_ck: dpll1_x2_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll1_ck>;
+ clock-mult = <2>;
+ clock-div = <1>;
+ };
+
+ dpll1_x2m2_ck: dpll1_x2m2_ck@944 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&dpll1_x2_ck>;
+ ti,max-div = <31>;
+ reg = <0x0944>;
+ ti,index-starts-at-one;
+ };
+
+ cm_96m_fck: cm_96m_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&omap_96m_alwon_fck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ /* CM_CLKSEL1_PLL */
+ clock@d40 {
+ compatible = "ti,clksel";
+ reg = <0xd40>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ dpll3_m2_ck: clock-dpll3-m2 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll3_m2_ck";
+ clocks = <&dpll3_ck>;
+ ti,bit-shift = <27>;
+ ti,max-div = <31>;
+ ti,index-starts-at-one;
+ };
+
+ omap_96m_fck: clock-omap-96m-fck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "omap_96m_fck";
+ clocks = <&cm_96m_fck>, <&sys_ck>;
+ ti,bit-shift = <6>;
+ };
+
+ omap_54m_fck: clock-omap-54m-fck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "omap_54m_fck";
+ clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
+ ti,bit-shift = <5>;
+ };
+
+ omap_48m_fck: clock-omap-48m-fck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "omap_48m_fck";
+ clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
+ ti,bit-shift = <3>;
+ };
+ };
+
+ /* CM_CLKSEL_DSS */
+ clock@e40 {
+ compatible = "ti,clksel";
+ reg = <0xe40>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ dpll4_m3_ck: clock-dpll4-m3 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll4_m3_ck";
+ clocks = <&dpll4_ck>;
+ ti,bit-shift = <8>;
+ ti,max-div = <32>;
+ ti,index-starts-at-one;
+ };
+
+ dpll4_m4_ck: clock-dpll4-m4 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll4_m4_ck";
+ clocks = <&dpll4_ck>;
+ ti,max-div = <16>;
+ ti,index-starts-at-one;
+ };
+ };
+
+ dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll4_m3_ck>;
+ clock-mult = <2>;
+ clock-div = <1>;
+ };
+
+ dpll4_m3x2_ck: dpll4_m3x2_ck@d00 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&dpll4_m3x2_mul_ck>;
+ ti,bit-shift = <0x1c>;
+ reg = <0x0d00>;
+ ti,set-bit-to-disable;
+ };
+
+ cm_96m_d2_fck: cm_96m_d2_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&cm_96m_fck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ omap_12m_fck: omap_12m_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&omap_48m_fck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&dpll4_m4_ck>;
+ ti,clock-mult = <2>;
+ ti,clock-div = <1>;
+ ti,set-rate-parent;
+ };
+
+ dpll4_m4x2_ck: dpll4_m4x2_ck@d00 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&dpll4_m4x2_mul_ck>;
+ ti,bit-shift = <0x1d>;
+ reg = <0x0d00>;
+ ti,set-bit-to-disable;
+ ti,set-rate-parent;
+ };
+
+ dpll4_m5_ck: dpll4_m5_ck@f40 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&dpll4_ck>;
+ ti,max-div = <63>;
+ reg = <0x0f40>;
+ ti,index-starts-at-one;
+ };
+
+ dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&dpll4_m5_ck>;
+ ti,clock-mult = <2>;
+ ti,clock-div = <1>;
+ ti,set-rate-parent;
+ };
+
+ dpll4_m5x2_ck: dpll4_m5x2_ck@d00 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&dpll4_m5x2_mul_ck>;
+ ti,bit-shift = <0x1e>;
+ reg = <0x0d00>;
+ ti,set-bit-to-disable;
+ ti,set-rate-parent;
+ };
+
+ dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll4_m6_ck>;
+ clock-mult = <2>;
+ clock-div = <1>;
+ };
+
+ dpll4_m6x2_ck: dpll4_m6x2_ck@d00 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&dpll4_m6x2_mul_ck>;
+ ti,bit-shift = <0x1f>;
+ reg = <0x0d00>;
+ ti,set-bit-to-disable;
+ };
+
+ emu_per_alwon_ck: emu_per_alwon_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll4_m6x2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ /* CM_CLKOUT_CTRL */
+ clock@d70 {
+ compatible = "ti,clksel";
+ reg = <0xd70>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ clkout2_src_gate_ck: clock-clkout2-src-gate {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "clkout2_src_gate_ck";
+ clocks = <&core_ck>;
+ ti,bit-shift = <7>;
+ };
+
+ clkout2_src_mux_ck: clock-clkout2-src-mux {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "clkout2_src_mux_ck";
+ clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
+ };
+
+ sys_clkout2: clock-sys-clkout2 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "sys_clkout2";
+ clocks = <&clkout2_src_ck>;
+ ti,bit-shift = <3>;
+ ti,max-div = <64>;
+ ti,index-power-of-two;
+ };
+ };
+
+ clkout2_src_ck: clkout2_src_ck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>;
+ };
+
+ mpu_ck: mpu_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll1_x2m2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ arm_fck: arm_fck@924 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&mpu_ck>;
+ reg = <0x0924>;
+ ti,max-div = <2>;
+ };
+
+ emu_mpu_alwon_ck: emu_mpu_alwon_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&mpu_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ /* CM_CLKSEL_CORE */
+ clock@a40 {
+ compatible = "ti,clksel";
+ reg = <0xa40>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ l3_ick: clock-l3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "l3_ick";
+ clocks = <&core_ck>;
+ ti,max-div = <3>;
+ ti,index-starts-at-one;
+ };
+
+ l4_ick: clock-l4-ick {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "l4_ick";
+ clocks = <&l3_ick>;
+ ti,bit-shift = <2>;
+ ti,max-div = <3>;
+ ti,index-starts-at-one;
+ };
+
+ gpt10_mux_fck: clock-gpt10-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt10_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <6>;
+ };
+
+ gpt11_mux_fck: clock-gpt11-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt11_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <7>;
+ };
+ };
+
+ /* CM_CLKSEL_WKUP */
+ clock@c40 {
+ compatible = "ti,clksel";
+ reg = <0xc40>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ rm_ick: clock-rm-ick {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "rm_ick";
+ clocks = <&l4_ick>;
+ ti,bit-shift = <1>;
+ ti,max-div = <3>;
+ ti,index-starts-at-one;
+ };
+
+ gpt1_mux_fck: clock-gpt1-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt1_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ };
+ };
+
+ /* CM_FCLKEN1_CORE */
+ clock@a00 {
+ compatible = "ti,clksel";
+ reg = <0xa00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ gpt10_gate_fck: clock-gpt10-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt10_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <11>;
+ };
+
+ gpt11_gate_fck: clock-gpt11-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt11_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <12>;
+ };
+
+ mmchs2_fck: clock-mmchs2-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "mmchs2_fck";
+ clocks = <&core_96m_fck>;
+ ti,bit-shift = <25>;
+ };
+
+ mmchs1_fck: clock-mmchs1-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "mmchs1_fck";
+ clocks = <&core_96m_fck>;
+ ti,bit-shift = <24>;
+ };
+
+ i2c3_fck: clock-i2c3-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "i2c3_fck";
+ clocks = <&core_96m_fck>;
+ ti,bit-shift = <17>;
+ };
+
+ i2c2_fck: clock-i2c2-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "i2c2_fck";
+ clocks = <&core_96m_fck>;
+ ti,bit-shift = <16>;
+ };
+
+ i2c1_fck: clock-i2c1-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "i2c1_fck";
+ clocks = <&core_96m_fck>;
+ ti,bit-shift = <15>;
+ };
+
+ mcbsp5_gate_fck: clock-mcbsp5-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "mcbsp5_gate_fck";
+ clocks = <&mcbsp_clks>;
+ ti,bit-shift = <10>;
+ };
+
+ mcbsp1_gate_fck: clock-mcbsp1-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "mcbsp1_gate_fck";
+ clocks = <&mcbsp_clks>;
+ ti,bit-shift = <9>;
+ };
+
+ mcspi4_fck: clock-mcspi4-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "mcspi4_fck";
+ clocks = <&core_48m_fck>;
+ ti,bit-shift = <21>;
+ };
+
+ mcspi3_fck: clock-mcspi3-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "mcspi3_fck";
+ clocks = <&core_48m_fck>;
+ ti,bit-shift = <20>;
+ };
+
+ mcspi2_fck: clock-mcspi2-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "mcspi2_fck";
+ clocks = <&core_48m_fck>;
+ ti,bit-shift = <19>;
+ };
+
+ mcspi1_fck: clock-mcspi1-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "mcspi1_fck";
+ clocks = <&core_48m_fck>;
+ ti,bit-shift = <18>;
+ };
+
+ uart2_fck: clock-uart2-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "uart2_fck";
+ clocks = <&core_48m_fck>;
+ ti,bit-shift = <14>;
+ };
+
+ uart1_fck: clock-uart1-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "uart1_fck";
+ clocks = <&core_48m_fck>;
+ ti,bit-shift = <13>;
+ };
+
+ hdq_fck: clock-hdq-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "hdq_fck";
+ clocks = <&core_12m_fck>;
+ ti,bit-shift = <22>;
+ };
+ };
+
+ gpt10_fck: gpt10_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
+ };
+
+ gpt11_fck: gpt11_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
+ };
+
+ core_96m_fck: core_96m_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&omap_96m_fck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ core_48m_fck: core_48m_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&omap_48m_fck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ core_12m_fck: core_12m_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&omap_12m_fck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ core_l3_ick: core_l3_ick {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&l3_ick>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ /* CM_ICLKEN1_CORE */
+ clock@a10 {
+ compatible = "ti,clksel";
+ reg = <0xa10>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ sdrc_ick: clock-sdrc-ick {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "sdrc_ick";
+ clocks = <&core_l3_ick>;
+ ti,bit-shift = <1>;
+ };
+
+ mmchs2_ick: clock-mmchs2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mmchs2_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <25>;
+ };
+
+ mmchs1_ick: clock-mmchs1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mmchs1_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <24>;
+ };
+
+ hdq_ick: clock-hdq-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "hdq_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <22>;
+ };
+
+ mcspi4_ick: clock-mcspi4-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcspi4_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <21>;
+ };
+
+ mcspi3_ick: clock-mcspi3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcspi3_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <20>;
+ };
+
+ mcspi2_ick: clock-mcspi2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcspi2_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <19>;
+ };
+
+ mcspi1_ick: clock-mcspi1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcspi1_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <18>;
+ };
+
+ i2c3_ick: clock-i2c3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "i2c3_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <17>;
+ };
+
+ i2c2_ick: clock-i2c2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "i2c2_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <16>;
+ };
+
+ i2c1_ick: clock-i2c1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "i2c1_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <15>;
+ };
+
+ uart2_ick: clock-uart2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "uart2_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <14>;
+ };
+
+ uart1_ick: clock-uart1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "uart1_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <13>;
+ };
+
+ gpt11_ick: clock-gpt11-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt11_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <12>;
+ };
+
+ gpt10_ick: clock-gpt10-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt10_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <11>;
+ };
+
+ mcbsp5_ick: clock-mcbsp5-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcbsp5_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <10>;
+ };
+
+ mcbsp1_ick: clock-mcbsp1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcbsp1_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <9>;
+ };
+
+ omapctrl_ick: clock-omapctrl-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "omapctrl_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <6>;
+ };
+
+ aes2_ick: clock-aes2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "aes2_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <28>;
+ };
+
+ sha12_ick: clock-sha12-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "sha12_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <27>;
+ };
+ };
+
+ gpmc_fck: gpmc_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&core_l3_ick>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ core_l4_ick: core_l4_ick {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&l4_ick>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ /* CM_FCLKEN_DSS */
+ clock@e00 {
+ compatible = "ti,clksel";
+ reg = <0xe00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ dss_tv_fck: clock-dss-tv-fck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "dss_tv_fck";
+ clocks = <&omap_54m_fck>;
+ ti,bit-shift = <2>;
+ };
+
+ dss_96m_fck: clock-dss-96m-fck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "dss_96m_fck";
+ clocks = <&omap_96m_fck>;
+ ti,bit-shift = <2>;
+ };
+
+ dss2_alwon_fck: clock-dss2-alwon-fck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "dss2_alwon_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <1>;
+ };
+ };
+
+ dummy_ck: dummy_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ /* CM_FCLKEN_WKUP */
+ clock@c00 {
+ compatible = "ti,clksel";
+ reg = <0xc00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ gpt1_gate_fck: clock-gpt1-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt1_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <0>;
+ };
+
+ gpio1_dbck: clock-gpio1-dbck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "gpio1_dbck";
+ clocks = <&wkup_32k_fck>;
+ ti,bit-shift = <3>;
+ };
+
+ wdt2_fck: clock-wdt2-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "wdt2_fck";
+ clocks = <&wkup_32k_fck>;
+ ti,bit-shift = <5>;
+ };
+ };
+
+ gpt1_fck: gpt1_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
+ };
+
+ wkup_32k_fck: wkup_32k_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&omap_32k_fck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ /* CM_ICLKEN_WKUP */
+ clock@c10 {
+ compatible = "ti,clksel";
+ reg = <0xc10>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ wdt2_ick: clock-wdt2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "wdt2_ick";
+ clocks = <&wkup_l4_ick>;
+ ti,bit-shift = <5>;
+ };
+
+ wdt1_ick: clock-wdt1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "wdt1_ick";
+ clocks = <&wkup_l4_ick>;
+ ti,bit-shift = <4>;
+ };
+
+ gpio1_ick: clock-gpio1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpio1_ick";
+ clocks = <&wkup_l4_ick>;
+ ti,bit-shift = <3>;
+ };
+
+ omap_32ksync_ick: clock-omap-32ksync-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "omap_32ksync_ick";
+ clocks = <&wkup_l4_ick>;
+ ti,bit-shift = <2>;
+ };
+
+ gpt12_ick: clock-gpt12-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt12_ick";
+ clocks = <&wkup_l4_ick>;
+ ti,bit-shift = <1>;
+ };
+
+ gpt1_ick: clock-gpt1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt1_ick";
+ clocks = <&wkup_l4_ick>;
+ ti,bit-shift = <0>;
+ };
+ };
+
+ per_96m_fck: per_96m_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&omap_96m_alwon_fck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ per_48m_fck: per_48m_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&omap_48m_fck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ /* CM_FCLKEN_PER */
+ clock@1000 {
+ compatible = "ti,clksel";
+ reg = <0x1000>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ uart3_fck: clock-uart3-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "uart3_fck";
+ clocks = <&per_48m_fck>;
+ ti,bit-shift = <11>;
+ };
+
+ gpt2_gate_fck: clock-gpt2-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt2_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <3>;
+ };
+
+ gpt3_gate_fck: clock-gpt3-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt3_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <4>;
+ };
+
+ gpt4_gate_fck: clock-gpt4-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt4_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <5>;
+ };
+
+ gpt5_gate_fck: clock-gpt5-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt5_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <6>;
+ };
+
+ gpt6_gate_fck: clock-gpt6-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt6_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <7>;
+ };
+
+ gpt7_gate_fck: clock-gpt7-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt7_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <8>;
+ };
+
+ gpt8_gate_fck: clock-gpt8-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt8_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <9>;
+ };
+
+ gpt9_gate_fck: clock-gpt9-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt9_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <10>;
+ };
+
+ gpio6_dbck: clock-gpio6-dbck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "gpio6_dbck";
+ clocks = <&per_32k_alwon_fck>;
+ ti,bit-shift = <17>;
+ };
+
+ gpio5_dbck: clock-gpio5-dbck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "gpio5_dbck";
+ clocks = <&per_32k_alwon_fck>;
+ ti,bit-shift = <16>;
+ };
+
+ gpio4_dbck: clock-gpio4-dbck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "gpio4_dbck";
+ clocks = <&per_32k_alwon_fck>;
+ ti,bit-shift = <15>;
+ };
+
+ gpio3_dbck: clock-gpio3-dbck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "gpio3_dbck";
+ clocks = <&per_32k_alwon_fck>;
+ ti,bit-shift = <14>;
+ };
+
+ gpio2_dbck: clock-gpio2-dbck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "gpio2_dbck";
+ clocks = <&per_32k_alwon_fck>;
+ ti,bit-shift = <13>;
+ };
+
+ wdt3_fck: clock-wdt3-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "wdt3_fck";
+ clocks = <&per_32k_alwon_fck>;
+ ti,bit-shift = <12>;
+ };
+
+ mcbsp2_gate_fck: clock-mcbsp2-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "mcbsp2_gate_fck";
+ clocks = <&mcbsp_clks>;
+ ti,bit-shift = <0>;
+ };
+
+ mcbsp3_gate_fck: clock-mcbsp3-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "mcbsp3_gate_fck";
+ clocks = <&mcbsp_clks>;
+ ti,bit-shift = <1>;
+ };
+
+ mcbsp4_gate_fck: clock-mcbsp4-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "mcbsp4_gate_fck";
+ clocks = <&mcbsp_clks>;
+ ti,bit-shift = <2>;
+ };
+ };
+
+ /* CM_CLKSEL_PER */
+ clock@1040 {
+ compatible = "ti,clksel";
+ reg = <0x1040>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ gpt2_mux_fck: clock-gpt2-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt2_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ };
+
+ gpt3_mux_fck: clock-gpt3-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt3_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <1>;
+ };
+
+ gpt4_mux_fck: clock-gpt4-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt4_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <2>;
+ };
+
+ gpt5_mux_fck: clock-gpt5-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt5_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <3>;
+ };
+
+ gpt6_mux_fck: clock-gpt6-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt6_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <4>;
+ };
+
+ gpt7_mux_fck: clock-gpt7-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt7_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <5>;
+ };
+
+ gpt8_mux_fck: clock-gpt8-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt8_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <6>;
+ };
+
+ gpt9_mux_fck: clock-gpt9-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt9_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <7>;
+ };
+ };
+
+ gpt2_fck: gpt2_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
+ };
+
+ gpt3_fck: gpt3_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
+ };
+
+ gpt4_fck: gpt4_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
+ };
+
+ gpt5_fck: gpt5_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
+ };
+
+ gpt6_fck: gpt6_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
+ };
+
+ gpt7_fck: gpt7_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
+ };
+
+ gpt8_fck: gpt8_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
+ };
+
+ gpt9_fck: gpt9_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
+ };
+
+ per_32k_alwon_fck: per_32k_alwon_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&omap_32k_fck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ per_l4_ick: per_l4_ick {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&l4_ick>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ /* CM_ICLKEN_PER */
+ clock@1010 {
+ compatible = "ti,clksel";
+ reg = <0x1010>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ gpio6_ick: clock-gpio6-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpio6_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <17>;
+ };
+
+ gpio5_ick: clock-gpio5-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpio5_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <16>;
+ };
+
+ gpio4_ick: clock-gpio4-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpio4_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <15>;
+ };
+
+ gpio3_ick: clock-gpio3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpio3_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <14>;
+ };
+
+ gpio2_ick: clock-gpio2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpio2_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <13>;
+ };
+
+ wdt3_ick: clock-wdt3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "wdt3_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <12>;
+ };
+
+ uart3_ick: clock-uart3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "uart3_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <11>;
+ };
+
+ uart4_ick: clock-uart4-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "uart4_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <18>;
+ };
+
+ gpt9_ick: clock-gpt9-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt9_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <10>;
+ };
+
+ gpt8_ick: clock-gpt8-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt8_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <9>;
+ };
+
+ gpt7_ick: clock-gpt7-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt7_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <8>;
+ };
+
+ gpt6_ick: clock-gpt6-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt6_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <7>;
+ };
+
+ gpt5_ick: clock-gpt5-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt5_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <6>;
+ };
+
+ gpt4_ick: clock-gpt4-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt4_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <5>;
+ };
+
+ gpt3_ick: clock-gpt3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt3_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <4>;
+ };
+
+ gpt2_ick: clock-gpt2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt2_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <3>;
+ };
+
+ mcbsp2_ick: clock-mcbsp2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcbsp2_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <0>;
+ };
+
+ mcbsp3_ick: clock-mcbsp3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcbsp3_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <1>;
+ };
+
+ mcbsp4_ick: clock-mcbsp4-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcbsp4_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <2>;
+ };
+ };
+
+ emu_src_ck: emu_src_ck {
+ #clock-cells = <0>;
+ compatible = "ti,clkdm-gate-clock";
+ clocks = <&emu_src_mux_ck>;
+ };
+
+ secure_32k_fck: secure_32k_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ gpt12_fck: gpt12_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&secure_32k_fck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ wdt1_fck: wdt1_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&secure_32k_fck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+};
+
+&cm_clockdomains {
+ core_l3_clkdm: core_l3_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&sdrc_ick>;
+ };
+
+ dpll3_clkdm: dpll3_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&dpll3_ck>;
+ };
+
+ dpll1_clkdm: dpll1_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&dpll1_ck>;
+ };
+
+ per_clkdm: per_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
+ <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
+ <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
+ <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
+ <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
+ <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
+ <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+ <&mcbsp4_ick>;
+ };
+
+ emu_clkdm: emu_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&emu_src_ck>;
+ };
+
+ dpll4_clkdm: dpll4_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&dpll4_ck>;
+ };
+
+ wkup_clkdm: wkup_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+ <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+ <&gpt1_ick>;
+ };
+
+ dss_clkdm: dss_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>;
+ };
+
+ core_l4_clkdm: core_l4_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+ <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+ <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+ <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+ <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+ <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+ <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+ <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+ <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>;
+ };
+};
diff --git a/src/arm/ti/omap/omap4-cpu-thermal.dtsi b/src/arm/ti/omap/omap4-cpu-thermal.dtsi
new file mode 100644
index 0000000..d484ec1
--- /dev/null
+++ b/src/arm/ti/omap/omap4-cpu-thermal.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP4/5 SoC CPU thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+cpu_thermal: cpu_thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+
+ /*
+ * See 44xx files for single sensor addressing, omap5 and dra7 need
+ * also sensor ID for addressing.
+ */
+ thermal-sensors = <&bandgap 0>;
+
+ cpu_trips: trips {
+ cpu_alert0: cpu_alert {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_crit: cpu_crit {
+ temperature = <125000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cpu_cooling_maps: cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap4-droid-bionic-xt875.dts b/src/arm/ti/omap/omap4-droid-bionic-xt875.dts
new file mode 100644
index 0000000..ccf03a7
--- /dev/null
+++ b/src/arm/ti/omap/omap4-droid-bionic-xt875.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+/ {
+ model = "Motorola Droid Bionic XT875";
+ compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4";
+};
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <
+ MATRIX_KEY(5, 0, KEY_VOLUMEUP)
+ MATRIX_KEY(3, 0, KEY_VOLUMEDOWN)
+ >;
+};
+
+&i2c1 {
+ led-controller@38 {
+ compatible = "ti,lm3532";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x38>;
+
+ enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+ ramp-up-us = <1024>;
+ ramp-down-us = <8193>;
+
+ backlight_led: led@0 {
+ reg = <0>;
+ led-sources = <2>;
+ ti,led-mode = <0>;
+ label = ":backlight";
+ };
+ };
+};
+
+&i2c4 {
+ kxtf9: accelerometer@f {
+ compatible = "kionix,kxtf9";
+ reg = <0x0f>;
+
+ vdd-supply = <&vhvio>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+
+ rotation-matrix = "0", "-1", "0",
+ "1", "0", "0",
+ "0", "0", "1";
+ };
+};
diff --git a/src/arm/ti/omap/omap4-droid4-xt894.dts b/src/arm/ti/omap/omap4-droid4-xt894.dts
new file mode 100644
index 0000000..e833c21
--- /dev/null
+++ b/src/arm/ti/omap/omap4-droid4-xt894.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+/ {
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ volume_down {
+ label = "Volume Down";
+ gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */
+ linux,code = <KEY_VOLUMEDOWN>;
+ linux,can-disable;
+ /* Value above 7.95ms for no GPIO hardware debounce */
+ debounce-interval = <10>;
+ };
+
+ /*
+ * We use pad 0x4a100116 abe_dmic_din3.gpio_122 as the irq instead
+ * of the gpio interrupt to avoid lost events in deeper idle states.
+ */
+ slider {
+ label = "Keypad Slide";
+ interrupts-extended = <&omap4_pmx_core 0xd6>;
+ gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_KEYPAD_SLIDE>;
+ linux,can-disable;
+ /* Value above 7.95ms for no GPIO hardware debounce */
+ debounce-interval = <10>;
+ };
+ };
+};
+
+/ {
+ model = "Motorola Droid 4 XT894";
+ compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
+};
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <
+
+ /* Row 1 */
+ MATRIX_KEY(0, 2, KEY_1)
+ MATRIX_KEY(0, 6, KEY_2)
+ MATRIX_KEY(2, 3, KEY_3)
+ MATRIX_KEY(0, 7, KEY_4)
+ MATRIX_KEY(0, 4, KEY_5)
+ MATRIX_KEY(5, 5, KEY_6)
+ MATRIX_KEY(0, 1, KEY_7)
+ MATRIX_KEY(0, 5, KEY_8)
+ MATRIX_KEY(0, 0, KEY_9)
+ MATRIX_KEY(1, 6, KEY_0)
+
+ /* Row 2 */
+ MATRIX_KEY(3, 4, KEY_APOSTROPHE)
+ MATRIX_KEY(7, 6, KEY_Q)
+ MATRIX_KEY(7, 7, KEY_W)
+ MATRIX_KEY(7, 2, KEY_E)
+ MATRIX_KEY(1, 0, KEY_R)
+ MATRIX_KEY(4, 4, KEY_T)
+ MATRIX_KEY(1, 2, KEY_Y)
+ MATRIX_KEY(6, 7, KEY_U)
+ MATRIX_KEY(2, 2, KEY_I)
+ MATRIX_KEY(5, 6, KEY_O)
+ MATRIX_KEY(3, 7, KEY_P)
+ MATRIX_KEY(6, 5, KEY_BACKSPACE)
+
+ /* Row 3 */
+ MATRIX_KEY(5, 4, KEY_TAB)
+ MATRIX_KEY(5, 7, KEY_A)
+ MATRIX_KEY(2, 7, KEY_S)
+ MATRIX_KEY(7, 0, KEY_D)
+ MATRIX_KEY(2, 6, KEY_F)
+ MATRIX_KEY(6, 2, KEY_G)
+ MATRIX_KEY(6, 6, KEY_H)
+ MATRIX_KEY(1, 4, KEY_J)
+ MATRIX_KEY(3, 1, KEY_K)
+ MATRIX_KEY(2, 1, KEY_L)
+ MATRIX_KEY(4, 6, KEY_ENTER)
+
+ /* Row 4 */
+ MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */
+ MATRIX_KEY(6, 1, KEY_Z)
+ MATRIX_KEY(7, 4, KEY_X)
+ MATRIX_KEY(5, 1, KEY_C)
+ MATRIX_KEY(1, 7, KEY_V)
+ MATRIX_KEY(2, 4, KEY_B)
+ MATRIX_KEY(4, 1, KEY_N)
+ MATRIX_KEY(1, 1, KEY_M)
+ MATRIX_KEY(3, 5, KEY_COMMA)
+ MATRIX_KEY(5, 2, KEY_DOT)
+ MATRIX_KEY(6, 3, KEY_UP)
+ MATRIX_KEY(7, 3, KEY_OK)
+
+ /* Row 5 */
+ MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */
+ MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */
+ MATRIX_KEY(6, 0, KEY_MINUS)
+ MATRIX_KEY(4, 7, KEY_EQUAL)
+ MATRIX_KEY(1, 5, KEY_SPACE)
+ MATRIX_KEY(3, 2, KEY_SLASH)
+ MATRIX_KEY(4, 3, KEY_LEFT)
+ MATRIX_KEY(5, 3, KEY_DOWN)
+ MATRIX_KEY(3, 3, KEY_RIGHT)
+
+ /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */
+ MATRIX_KEY(5, 0, KEY_VOLUMEUP)
+ >;
+};
+
+&i2c1 {
+ led-controller@38 {
+ compatible = "ti,lm3532";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x38>;
+
+ enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+ ramp-up-us = <1024>;
+ ramp-down-us = <8193>;
+
+ backlight_led: led@0 {
+ reg = <0>;
+ led-sources = <2>;
+ ti,led-mode = <0>;
+ label = ":backlight";
+ };
+
+ led@1 {
+ reg = <1>;
+ led-sources = <1>;
+ ti,led-mode = <0>;
+ label = ":kbd_backlight";
+ };
+ };
+};
+
+&i2c4 {
+ lis3dh: accelerometer@18 {
+ compatible = "st,lis3dh-accel";
+ reg = <0x18>;
+
+ vdd-supply = <&vhvio>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */
+
+ rotation-matrix = "0", "-1", "0",
+ "1", "0", "0",
+ "0", "0", "1";
+ };
+};
diff --git a/src/arm/ti/omap/omap4-duovero-parlor.dts b/src/arm/ti/omap/omap4-duovero-parlor.dts
new file mode 100644
index 0000000..6d1beb4
--- /dev/null
+++ b/src/arm/ti/omap/omap4-duovero-parlor.dts
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+/dts-v1/;
+
+#include "omap4-duovero.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "OMAP4430 Gumstix Duovero on Parlor";
+ compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
+
+ aliases {
+ display0 = &hdmi0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led0 {
+ label = "duovero:blue:led0";
+ gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio_122 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button0 {
+ label = "button0";
+ linux,code = <BTN_0>;
+ gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */
+ /* Value above 7.95ms for no GPIO hardware debounce */
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
+ hdmi0: connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "d";
+
+ hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+ };
+};
+
+&omap4_pmx_core {
+ pinctrl-0 = <
+ &led_pins
+ &button_pins
+ &smsc_pins
+ >;
+
+ led_pins: led-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */
+ >;
+ };
+
+ button_pins: button-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* abe_dmic_din2.gpio_121 */
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ smsc_pins: smsc-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3) /* gpmc_a20.gpio_44: IRQ */
+ OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a21.gpio_45: nReset */
+ OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48: amdix enabled */
+ >;
+ };
+
+ dss_hdmi_pins: dss-hdmi-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) /* hdmi_hpd.gpio_63 */
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */
+ >;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <100000>;
+
+ /* optional 1K EEPROM with revision information */
+ eeprom@51 {
+ compatible = "atmel,24c01";
+ reg = <0x51>;
+ pagesize = <8>;
+ };
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+ ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
+
+ ethernet@gpmc {
+ reg = <5 0 0xff>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>; /* gpio_44 */
+
+ phy-mode = "mii";
+
+ gpmc,cs-on-ns = <10>;
+ gpmc,cs-rd-off-ns = <50>;
+ gpmc,cs-wr-off-ns = <50>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <10>;
+ gpmc,adv-wr-off-ns = <10>;
+ gpmc,oe-on-ns = <15>;
+ gpmc,oe-off-ns = <50>;
+ gpmc,we-on-ns = <15>;
+ gpmc,we-off-ns = <50>;
+ gpmc,rd-cycle-ns = <50>;
+ gpmc,wr-cycle-ns = <50>;
+ gpmc,access-ns = <50>;
+ gpmc,page-burst-access-ns = <0>;
+ gpmc,bus-turnaround-ns = <35>;
+ gpmc,cycle2cycle-delay-ns = <35>;
+ gpmc,wr-data-mux-bus-ns = <35>;
+ gpmc,wr-access-ns = <50>;
+
+ gpmc,mux-add-data = <2>;
+ gpmc,sync-read;
+ gpmc,sync-write;
+ gpmc,clk-activation-ns = <5>;
+ gpmc,sync-clk-ps = <20000>;
+ };
+};
+
+&dss {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+ vdda-supply = <&vdac>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_hdmi_pins>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+};
+
+&uart3 {
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART3_RX>;
+};
diff --git a/src/arm/ti/omap/omap4-duovero.dtsi b/src/arm/ti/omap/omap4-duovero.dtsi
new file mode 100644
index 0000000..b8af455
--- /dev/null
+++ b/src/arm/ti/omap/omap4-duovero.dtsi
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+#include "omap443x.dtsi"
+#include "omap4-mcpdm.dtsi"
+
+/ {
+ model = "Gumstix Duovero";
+ compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "DuoVero";
+
+ ti,mclk-freq = <38400000>;
+
+ ti,mcpdm = <&mcpdm>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias";
+ };
+
+ /* HS USB Host PHY on PORT 1 */
+ hsusb1_phy: hsusb1_phy {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
+ #phy-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb1phy_pins>;
+
+ clocks = <&auxclk3_ck>;
+ clock-names = "main_clk";
+ clock-frequency = <19200000>;
+ };
+
+ /* regulator for w2cbw0015 on sdio5 */
+ w2cbw0015_vmmc: w2cbw0015_vmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&w2cbw0015_pins>;
+ compatible = "regulator-fixed";
+ regulator-name = "w2cbw0015";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; /* gpio_43 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+};
+
+&omap4_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6040_pins
+ &hsusbb1_pins
+ >;
+
+ twl6040_pins: twl6040-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_nxt.gpio_160 */
+ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
+ >;
+ };
+
+ mcbsp1_pins: mcbsp1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+ OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
+ OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
+ OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+ >;
+ };
+
+ hsusbb1_pins: hsusbb1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+ OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+ OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+ OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+ OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+ OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+ OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+ OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+ OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+ OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+ OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+ OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+ >;
+ };
+
+ hsusb1phy_pins: hsusb1phy-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3) /* gpmc_wait1.gpio_62 */
+ >;
+ };
+
+ w2cbw0015_pins: w2cbw0015-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ i2c4_pins: i2c4-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
+ OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_cmd */
+ OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_dat0 */
+ OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
+ OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
+ OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
+ >;
+ };
+
+ mmc5_pins: mmc5-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk */
+ OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_cmd */
+ OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_dat0 */
+ OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1 */
+ OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2 */
+ OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3 */
+ >;
+ };
+};
+
+/* PMIC */
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <400000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+ };
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ #clock-cells = <0>;
+ reg = <0x4b>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+ ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* gpio_160 */
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+ };
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+/* on-board bluetooth / WiFi module */
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&mcbsp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+
+ vmmc-supply = <&vmmc>;
+ ti,bus-width = <4>;
+ ti,non-removable; /* FIXME: use PMIC_MMC detect */
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+/* mmc3 is available to the expansion board */
+
+&mmc4 {
+ status = "disabled";
+};
+
+/* on-board WiFi module */
+&mmc5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc5_pins>;
+
+ vmmc-supply = <&w2cbw0015_vmmc>;
+ ti,bus-width = <4>;
+ ti,non-removable;
+ cap-power-off-card;
+ keep-power-in-suspend;
+};
+
+&twl_usb_comparator {
+ usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+ interface-type = <1>;
+ mode = <3>;
+ power = <50>;
+};
+
+&usbhshost {
+ port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy>;
+};
+
diff --git a/src/arm/ti/omap/omap4-epson-embt2ws.dts b/src/arm/ti/omap/omap4-epson-embt2ws.dts
new file mode 100644
index 0000000..01d7838
--- /dev/null
+++ b/src/arm/ti/omap/omap4-epson-embt2ws.dts
@@ -0,0 +1,481 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 Andreas Kemnade
+ */
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include "omap4460.dtsi"
+
+/ {
+ model = "Epson Moverio BT-200";
+ compatible = "epson,embt2ws", "ti,omap4460", "ti,omap4";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1024M */
+ };
+
+ backlight-left {
+ compatible = "pwm-backlight";
+ pwms = <&twl_pwm 1 7812500>;
+ power-supply = <&unknown_supply>;
+ };
+
+ backlight-right {
+ compatible = "pwm-backlight";
+ pwms = <&twl_pwm 0 7812500>;
+ power-supply = <&unknown_supply>;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pins>;
+
+ key-lock {
+ label = "Lock";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <SW_ROTATE_LOCK>; /* SW_TOUCHPAD_LOCK */
+ linux,input-type = <EV_SW>;
+ };
+ };
+
+ unknown_supply: unknown-supply {
+ compatible = "regulator-fixed";
+ regulator-name = "unknown";
+ };
+
+ /* regulator for wl12xx on sdio2 */
+ wl12xx_vmmc: wl12xx-vmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_gpio>;
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <400000>;
+
+ twl: pmic@48 {
+ compatible = "ti,twl6032";
+ reg = <0x48>;
+ /* IRQ# = 7 */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ rtc {
+ compatible = "ti,twl4030-rtc";
+ interrupts = <11>;
+ };
+
+ ldo2: regulator-ldo2 {
+ compatible = "ti,twl6032-ldo2";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo4: regulator-ldo4 {
+ compatible = "ti,twl6032-ldo4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo3: regulator-ldo3 {
+ compatible = "ti,twl6032-ldo3";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo5: regulator-ldo5 {
+ compatible = "ti,twl6032-ldo5";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ ti,retain-on-reset;
+ };
+
+ ldo1: regulator-ldo1 {
+ compatible = "ti,twl6032-ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ ldo7: regulator-ldo7 {
+ compatible = "ti,twl6032-ldo7";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ ldoln: regulator-ldoln {
+ compatible = "ti,twl6032-ldoln";
+ regulator-always-on;
+ };
+
+ ldo6: regulator-ldo6 {
+ compatible = "ti,twl6032-ldo6";
+ regulator-always-on;
+ };
+
+ ldousb: regulator-ldousb {
+ compatible = "ti,twl6032-ldousb";
+ regulator-always-on;
+ };
+
+ vio: regulator-vio {
+ compatible = "ti,twl6032-vio";
+ regulator-always-on;
+ };
+
+ twl_usb_comparator: usb-comparator {
+ compatible = "ti,twl6030-usb";
+ interrupts = <4>, <10>;
+ };
+
+ twl_pwm: pwm {
+ /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
+ compatible = "ti,twl6030-pwm";
+ #pwm-cells = <2>;
+ };
+
+ twl_pwmled: pwmled {
+ /* provides one PWM (id 0 for Charging indicator LED) */
+ compatible = "ti,twl6030-pwmled";
+ #pwm-cells = <2>;
+ };
+
+ gpadc {
+ compatible = "ti,twl6032-gpadc";
+ interrupts = <3>;
+ #io-channel-cells = <1>;
+ };
+
+ };
+};
+
+#include "twl6030_omap4.dtsi"
+
+&twl_usb_comparator {
+ usb-supply = <&ldousb>;
+};
+
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <200000>;
+
+ /* at head/glasses */
+ mpu9150h: imu@68 {
+ compatible = "invensense,mpu9150";
+ reg = <0x68>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpu9150h_pins>;
+ interrupt-parent = <&gpio2>;
+ interrupt = <19 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <100000>;
+
+ led-controller@66 {
+ compatible = "rohm,bd2606mvv";
+ reg = <0x66>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led@4 {
+ reg = <4>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ };
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+
+ clock-frequency = <360000>;
+
+ /* TODO: KXTI9 at 0xf */
+
+ tlv320aic3x: codec@18 {
+ compatible = "ti,tlv320aic3x";
+ reg = <0x18>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tlv320aic3x_pins>;
+ #sound-dai-cells = <0>;
+
+ reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ };
+
+ mpu9150: imu@68 {
+ compatible = "invensense,mpu9150";
+ reg = <0x68>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpu9150_pins>;
+ interrupt-parent = <&gpio2>;
+ interrupt = <7 IRQ_TYPE_LEVEL_HIGH>;
+ invensense,level-shifter;
+ };
+};
+
+&keypad {
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_pins>;
+ keypad,num-rows = <2>;
+ keypad,num-columns = <3>;
+ linux,keymap = <MATRIX_KEY(0, 0, KEY_MENU)
+ MATRIX_KEY(0, 1, KEY_HOME)
+ MATRIX_KEY(0, 2, KEY_BACK)
+ MATRIX_KEY(1, 0, KEY_ESC)
+ MATRIX_KEY(1, 1, KEY_VOLUMEDOWN)
+ MATRIX_KEY(1, 2, KEY_VOLUMEUP)>;
+ linux,input-no-autorepeat;
+};
+
+&mcbsp2 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+ status = "okay";
+};
+
+
+&mmc1 {
+ /* sdcard */
+ vmmc-supply = <&ldo5>;
+ broken-cd;
+ bus-width = <4>;
+};
+
+&mmc2 {
+ /* emmc */
+ vmmc-supply = <&ldo2>;
+ bus-width = <8>;
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_pins>;
+ vmmc-supply = <&wl12xx_vmmc>;
+ interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core 0x12e>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1283";
+ reg = <2>;
+ interrupts-extended = <&gpio1 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "irq";
+ ref-clock-frequency = <26000000>;
+ tcxo-clock-frequency = <26000000>;
+ };
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ status = "disabled";
+};
+
+&omap4_pmx_core {
+ bt_pins: pinmux-bt-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE3) /* gpio25 */
+ >;
+ };
+
+ gpio_keys_pins: pinmux-gpio-key-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x56, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio35 */
+ >;
+ };
+
+ i2c1_pins: pinmux-i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ i2c2_pins: pinmux-i2c2-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x126, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+ OMAP4_IOPAD(0x128, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: pinmux-i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x12a, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+ OMAP4_IOPAD(0x12c, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ i2c4_pins: pinmux-i2c4-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x12e, PIN_INPUT | MUX_MODE0) /* i2c4_scl */
+ OMAP4_IOPAD(0x130, PIN_INPUT | MUX_MODE0) /* i2c4_sda */
+ >;
+ };
+
+ keypad_pins: pinmux-keypad-pins {
+ pinctrl-single,pins = <
+ /* kpd_row0 */
+ OMAP4_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE1)
+ /* kpd_row1 */
+ OMAP4_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE1)
+ /* kpd_row2 */
+ OMAP4_IOPAD(0x0054, PIN_INPUT_PULLUP | MUX_MODE1)
+ /* kpd_col0 */
+ OMAP4_IOPAD(0x0058, PIN_OUTPUT | MUX_MODE1)
+ /* kpd_col1 */
+ OMAP4_IOPAD(0x005a, PIN_OUTPUT | MUX_MODE1)
+ /* kpd_col2 */
+ OMAP4_IOPAD(0x005c, PIN_OUTPUT | MUX_MODE1)
+ >;
+ };
+
+ mcbsp2_pins: pinmux-mcbsp2-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */
+ OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */
+ OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0) /* abe_mcbsp2_dx */
+ OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx */
+ >;
+ };
+
+ mpu9150_pins: pinmux-mpu9150-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x5e, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ mpu9150h_pins: pinmux-mpu9150h-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x76, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ tlv320aic3x_pins: pinmux-tlv320aic3x-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x7e, PIN_OUTPUT | MUX_MODE3)
+ >;
+ };
+
+ uart2_pins: pinmux-uart2-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
+ OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ >;
+ };
+
+ uart3_pins: pinmux-uart3-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */
+ OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */
+ >;
+ };
+
+ usb_otg_hs_pins: pinmux-usb-otg-hs-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x194, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usba0_otg_ce */
+ OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) /* usba0_otg_dp */
+ OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) /* usba0_otg_dm */
+ >;
+ };
+
+ wl12xx_pins: pinmux-wl12xx-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x1c6, PIN_INPUT | MUX_MODE3) /* gpio_23 / IRQ */
+ OMAP4_IOPAD(0x16c, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_dat2 */
+ OMAP4_IOPAD(0x16e, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_dat1 */
+ OMAP4_IOPAD(0x170, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_dat0 */
+ OMAP4_IOPAD(0x172, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_dat3 */
+ OMAP4_IOPAD(0x174, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_cmd */
+ OMAP4_IOPAD(0x176, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_clk */
+ >;
+ };
+
+ wl12xx_gpio: pinmux-wl12xx-gpio-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE3) /* gpio_24 / WLAN_EN */
+ >;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins &bt_pins>;
+ interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART2_RX>;
+
+ /*
+ * BT + GPS in WL1283 in WG7500 requiring CLK32KAUDIO of pmic
+ * which does not have a driver
+ */
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART3_RX>;
+};
+
+&usb_otg_hs {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_otg_hs_pins>;
+
+ interface-type = <1>;
+ mode = <3>;
+ power = <50>;
+};
+
+&usbhshost {
+ status = "disabled";
+};
diff --git a/src/arm/ti/omap/omap4-kc1.dts b/src/arm/ti/omap/omap4-kc1.dts
new file mode 100644
index 0000000..c6b79ba
--- /dev/null
+++ b/src/arm/ti/omap/omap4-kc1.dts
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Paul Kocialkowski <contact@paulk.fr>
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+
+/ {
+ model = "Amazon Kindle Fire (first generation)";
+ compatible = "amazon,omap4-kc1", "ti,omap4430", "ti,omap4";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ led-controller {
+ compatible = "pwm-leds";
+
+ led-1 {
+ label = "green";
+ pwms = <&twl_pwm 0 7812500>;
+ max-brightness = <127>;
+ };
+
+ led-2 {
+ label = "orange";
+ pwms = <&twl_pwm 1 7812500>;
+ max-brightness = <127>;
+ };
+ };
+};
+
+&omap4_pmx_core {
+ pinctrl-names = "default";
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */
+ OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ i2c4_pins: i2c4-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat0 */
+ OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat1 */
+ OMAP4_IOPAD(0x044, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat2 */
+ OMAP4_IOPAD(0x046, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat3 */
+ OMAP4_IOPAD(0x048, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat4 */
+ OMAP4_IOPAD(0x04a, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat5 */
+ OMAP4_IOPAD(0x04c, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat6 */
+ OMAP4_IOPAD(0x04e, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat7 */
+ OMAP4_IOPAD(0x082, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_clk */
+ OMAP4_IOPAD(0x084, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_cmd */
+ >;
+ };
+
+ usb_otg_hs_pins: usb-otg-hs-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x194, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usba0_otg_ce */
+ OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) /* usba0_otg_dp */
+ OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) /* usba0_otg_dm */
+ >;
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART3_RX>;
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <400000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ /* IRQ# = 7 */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+
+ twl_power: power {
+ compatible = "ti,twl6030-power";
+ ti,system-power-controller;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&mmc1 {
+ status = "disabled";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+
+ vmmc-supply = <&vaux1>;
+ ti,non-removable;
+ bus-width = <8>;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&usb_otg_hs {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_otg_hs_pins>;
+
+ interface-type = <1>;
+ mode = <3>;
+ power = <50>;
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&twl_usb_comparator {
+ usb-supply = <&vusb>;
+};
diff --git a/src/arm/ti/omap/omap4-l4-abe.dtsi b/src/arm/ti/omap/omap4-l4-abe.dtsi
new file mode 100644
index 0000000..59f546a
--- /dev/null
+++ b/src/arm/ti/omap/omap4-l4-abe.dtsi
@@ -0,0 +1,503 @@
+&l4_abe { /* 0x40100000 */
+ compatible = "ti,omap4-l4-abe", "simple-pm-bus";
+ reg = <0x40100000 0x400>,
+ <0x40100400 0x400>;
+ reg-names = "la", "ap";
+ power-domains = <&prm_abe>;
+ /* OMAP4_L4_ABE_CLKCTRL is read-only */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */
+ <0x49000000 0x49000000 0x100000>;
+ segment@0 { /* 0x40100000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges =
+ /* CPU to L4 ABE mapping */
+ <0x00000000 0x00000000 0x000400>, /* ap 0 */
+ <0x00000400 0x00000400 0x000400>, /* ap 1 */
+ <0x00022000 0x00022000 0x001000>, /* ap 2 */
+ <0x00023000 0x00023000 0x001000>, /* ap 3 */
+ <0x00024000 0x00024000 0x001000>, /* ap 4 */
+ <0x00025000 0x00025000 0x001000>, /* ap 5 */
+ <0x00026000 0x00026000 0x001000>, /* ap 6 */
+ <0x00027000 0x00027000 0x001000>, /* ap 7 */
+ <0x00028000 0x00028000 0x001000>, /* ap 8 */
+ <0x00029000 0x00029000 0x001000>, /* ap 9 */
+ <0x0002a000 0x0002a000 0x001000>, /* ap 10 */
+ <0x0002b000 0x0002b000 0x001000>, /* ap 11 */
+ <0x0002e000 0x0002e000 0x001000>, /* ap 12 */
+ <0x0002f000 0x0002f000 0x001000>, /* ap 13 */
+ <0x00030000 0x00030000 0x001000>, /* ap 14 */
+ <0x00031000 0x00031000 0x001000>, /* ap 15 */
+ <0x00032000 0x00032000 0x001000>, /* ap 16 */
+ <0x00033000 0x00033000 0x001000>, /* ap 17 */
+ <0x00038000 0x00038000 0x001000>, /* ap 18 */
+ <0x00039000 0x00039000 0x001000>, /* ap 19 */
+ <0x0003a000 0x0003a000 0x001000>, /* ap 20 */
+ <0x0003b000 0x0003b000 0x001000>, /* ap 21 */
+ <0x0003c000 0x0003c000 0x001000>, /* ap 22 */
+ <0x0003d000 0x0003d000 0x001000>, /* ap 23 */
+ <0x0003e000 0x0003e000 0x001000>, /* ap 24 */
+ <0x0003f000 0x0003f000 0x001000>, /* ap 25 */
+ <0x00080000 0x00080000 0x010000>, /* ap 26 */
+ <0x00080000 0x00080000 0x001000>, /* ap 27 */
+ <0x000a0000 0x000a0000 0x010000>, /* ap 28 */
+ <0x000a0000 0x000a0000 0x001000>, /* ap 29 */
+ <0x000c0000 0x000c0000 0x010000>, /* ap 30 */
+ <0x000c0000 0x000c0000 0x001000>, /* ap 31 */
+ <0x000f1000 0x000f1000 0x001000>, /* ap 32 */
+ <0x000f2000 0x000f2000 0x001000>, /* ap 33 */
+
+ /* L3 to L4 ABE mapping */
+ <0x49000000 0x49000000 0x000400>, /* ap 0 */
+ <0x49000400 0x49000400 0x000400>, /* ap 1 */
+ <0x49022000 0x49022000 0x001000>, /* ap 2 */
+ <0x49023000 0x49023000 0x001000>, /* ap 3 */
+ <0x49024000 0x49024000 0x001000>, /* ap 4 */
+ <0x49025000 0x49025000 0x001000>, /* ap 5 */
+ <0x49026000 0x49026000 0x001000>, /* ap 6 */
+ <0x49027000 0x49027000 0x001000>, /* ap 7 */
+ <0x49028000 0x49028000 0x001000>, /* ap 8 */
+ <0x49029000 0x49029000 0x001000>, /* ap 9 */
+ <0x4902a000 0x4902a000 0x001000>, /* ap 10 */
+ <0x4902b000 0x4902b000 0x001000>, /* ap 11 */
+ <0x4902e000 0x4902e000 0x001000>, /* ap 12 */
+ <0x4902f000 0x4902f000 0x001000>, /* ap 13 */
+ <0x49030000 0x49030000 0x001000>, /* ap 14 */
+ <0x49031000 0x49031000 0x001000>, /* ap 15 */
+ <0x49032000 0x49032000 0x001000>, /* ap 16 */
+ <0x49033000 0x49033000 0x001000>, /* ap 17 */
+ <0x49038000 0x49038000 0x001000>, /* ap 18 */
+ <0x49039000 0x49039000 0x001000>, /* ap 19 */
+ <0x4903a000 0x4903a000 0x001000>, /* ap 20 */
+ <0x4903b000 0x4903b000 0x001000>, /* ap 21 */
+ <0x4903c000 0x4903c000 0x001000>, /* ap 22 */
+ <0x4903d000 0x4903d000 0x001000>, /* ap 23 */
+ <0x4903e000 0x4903e000 0x001000>, /* ap 24 */
+ <0x4903f000 0x4903f000 0x001000>, /* ap 25 */
+ <0x49080000 0x49080000 0x010000>, /* ap 26 */
+ <0x49080000 0x49080000 0x001000>, /* ap 27 */
+ <0x490a0000 0x490a0000 0x010000>, /* ap 28 */
+ <0x490a0000 0x490a0000 0x001000>, /* ap 29 */
+ <0x490c0000 0x490c0000 0x010000>, /* ap 30 */
+ <0x490c0000 0x490c0000 0x001000>, /* ap 31 */
+ <0x490f1000 0x490f1000 0x001000>, /* ap 32 */
+ <0x490f2000 0x490f2000 0x001000>; /* ap 33 */
+
+ target-module@22000 { /* 0x40122000, ap 2 02.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x2208c 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_MCBSP1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x22000 0x1000>,
+ <0x49022000 0x49022000 0x1000>;
+
+ mcbsp1: mcbsp@0 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x0 0xff>, /* MPU private access */
+ <0x49022000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ clocks = <&abe_clkctrl OMAP4_MCBSP1_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "common";
+ ti,buffer-size = <128>;
+ dmas = <&sdma 33>,
+ <&sdma 34>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ target-module@24000 { /* 0x40124000, ap 4 04.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x2408c 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_MCBSP2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x24000 0x1000>,
+ <0x49024000 0x49024000 0x1000>;
+
+ mcbsp2: mcbsp@0 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x0 0xff>, /* MPU private access */
+ <0x49024000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ clocks = <&abe_clkctrl OMAP4_MCBSP2_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "common";
+ ti,buffer-size = <128>;
+ dmas = <&sdma 17>,
+ <&sdma 18>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ target-module@26000 { /* 0x40126000, ap 6 06.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x2608c 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_MCBSP3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x1000>,
+ <0x49026000 0x49026000 0x1000>;
+
+ mcbsp3: mcbsp@0 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x0 0xff>, /* MPU private access */
+ <0x49026000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ clocks = <&abe_clkctrl OMAP4_MCBSP3_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "common";
+ ti,buffer-size = <128>;
+ dmas = <&sdma 19>,
+ <&sdma 20>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ target-module@28000 { /* 0x40128000, ap 8 08.0 */
+ /* 0x4012a000, ap 10 0a.0 */
+ compatible = "ti,sysc-mcasp", "ti,sysc";
+ reg = <0x28000 0x4>,
+ <0x28004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x28000 0x1000>,
+ <0x49028000 0x49028000 0x1000>,
+ <0x2000 0x2a000 0x1000>,
+ <0x4902a000 0x4902a000 0x1000>;
+
+ mcasp0: mcasp@0 {
+ compatible = "ti,omap4-mcasp-audio";
+ reg = <0x0 0x2000>,
+ <0x4902a000 0x1000>; /* L3 data port */
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx";
+ dmas = <&sdma 8>;
+ dma-names = "tx";
+ clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
+ clock-names = "fck";
+ op-mode = <1>; /* MCASP_DIT_MODE */
+ serial-dir = < 1 >; /* 1 TX serializers */
+ status = "disabled";
+ };
+ };
+
+ target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x2e000 0x4>,
+ <0x2e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_DMIC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2e000 0x1000>,
+ <0x4902e000 0x4902e000 0x1000>;
+
+ dmic: dmic@0 {
+ compatible = "ti,omap4-dmic";
+ reg = <0x0 0x7f>, /* MPU private access */
+ <0x4902e000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 67>;
+ dma-names = "up_link";
+ status = "disabled";
+ };
+ };
+
+ target-module@30000 { /* 0x40130000, ap 14 0e.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x30000 0x4>,
+ <0x30010 0x4>,
+ <0x30014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x30000 0x1000>,
+ <0x49030000 0x49030000 0x1000>;
+
+ wdt3: wdt@0 {
+ compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ mcpdm_module: target-module@32000 { /* 0x40132000, ap 16 10.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x32000 0x4>,
+ <0x32010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_MCPDM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x32000 0x1000>,
+ <0x49032000 0x49032000 0x1000>;
+
+ /* Must be only enabled for boards with pdmclk wired */
+ status = "disabled";
+
+ mcpdm: mcpdm@0 {
+ compatible = "ti,omap4-mcpdm";
+ reg = <0x0 0x7f>, /* MPU private access */
+ <0x49032000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 65>,
+ <&sdma 66>;
+ dma-names = "up_link", "dn_link";
+ };
+ };
+
+ target-module@38000 { /* 0x40138000, ap 18 12.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x38000 0x4>,
+ <0x38010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x38000 0x1000>,
+ <0x49038000 0x49038000 0x1000>;
+
+ timer5: timer@0 {
+ compatible = "ti,omap4430-timer";
+ reg = <0x00000000 0x80>,
+ <0x49038000 0x80>;
+ clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 24>,
+ <&syc_clk_div_ck>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-dsp;
+ };
+ };
+
+ target-module@3a000 { /* 0x4013a000, ap 20 14.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x3a000 0x4>,
+ <0x3a010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3a000 0x1000>,
+ <0x4903a000 0x4903a000 0x1000>;
+
+ timer6: timer@0 {
+ compatible = "ti,omap4430-timer";
+ reg = <0x00000000 0x80>,
+ <0x4903a000 0x80>;
+ clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 24>,
+ <&syc_clk_div_ck>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-dsp;
+ };
+ };
+
+ target-module@3c000 { /* 0x4013c000, ap 22 16.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x3c000 0x4>,
+ <0x3c010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3c000 0x1000>,
+ <0x4903c000 0x4903c000 0x1000>;
+
+ timer7: timer@0 {
+ compatible = "ti,omap4430-timer";
+ reg = <0x00000000 0x80>,
+ <0x4903c000 0x80>;
+ clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 24>,
+ <&syc_clk_div_ck>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-dsp;
+ };
+ };
+
+ target-module@3e000 { /* 0x4013e000, ap 24 18.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x3e000 0x4>,
+ <0x3e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3e000 0x1000>,
+ <0x4903e000 0x4903e000 0x1000>;
+
+ timer8: timer@0 {
+ compatible = "ti,omap4430-timer";
+ reg = <0x00000000 0x80>,
+ <0x4903e000 0x80>;
+ clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>,
+ <&syc_clk_div_ck>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ ti,timer-dsp;
+ };
+ };
+
+ target-module@80000 { /* 0x40180000, ap 26 1a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000 0x10000>,
+ <0x49080000 0x49080000 0x10000>;
+ };
+
+ target-module@a0000 { /* 0x401a0000, ap 28 1c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa0000 0x10000>,
+ <0x490a0000 0x490a0000 0x10000>;
+ };
+
+ target-module@c0000 { /* 0x401c0000, ap 30 1e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc0000 0x10000>,
+ <0x490c0000 0x490c0000 0x10000>;
+ };
+
+ target-module@f1000 { /* 0x401f1000, ap 32 20.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xf1000 0x4>,
+ <0xf1010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf1000 0x1000>,
+ <0x490f1000 0x490f1000 0x1000>;
+
+ /*
+ * No child device binding or driver in mainline.
+ * See Android tree and related upstreaming efforts
+ * for the old driver.
+ */
+ };
+ };
+};
+
diff --git a/src/arm/ti/omap/omap4-l4.dtsi b/src/arm/ti/omap/omap4-l4.dtsi
new file mode 100644
index 0000000..3fcef30
--- /dev/null
+++ b/src/arm/ti/omap/omap4-l4.dtsi
@@ -0,0 +1,2485 @@
+// SPDX-License-Identifier: GPL-2.0
+&l4_cfg { /* 0x4a000000 */
+ compatible = "ti,omap4-l4-cfg", "simple-pm-bus";
+ power-domains = <&prm_core>;
+ clocks = <&l4_cfg_clkctrl OMAP4_L4_CFG_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x4a000000 0x800>,
+ <0x4a000800 0x800>,
+ <0x4a001000 0x1000>;
+ reg-names = "ap", "la", "ia0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4a000000 0x080000>, /* segment 0 */
+ <0x00080000 0x4a080000 0x080000>, /* segment 1 */
+ <0x00100000 0x4a100000 0x080000>, /* segment 2 */
+ <0x00180000 0x4a180000 0x080000>, /* segment 3 */
+ <0x00200000 0x4a200000 0x080000>, /* segment 4 */
+ <0x00280000 0x4a280000 0x080000>, /* segment 5 */
+ <0x00300000 0x4a300000 0x080000>; /* segment 6 */
+
+ segment@0 { /* 0x4a000000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00001000 0x00001000 0x001000>, /* ap 1 */
+ <0x00000800 0x00000800 0x000800>, /* ap 2 */
+ <0x00002000 0x00002000 0x001000>, /* ap 3 */
+ <0x00003000 0x00003000 0x001000>, /* ap 4 */
+ <0x00004000 0x00004000 0x001000>, /* ap 5 */
+ <0x00005000 0x00005000 0x001000>, /* ap 6 */
+ <0x00056000 0x00056000 0x001000>, /* ap 7 */
+ <0x00057000 0x00057000 0x001000>, /* ap 8 */
+ <0x0005c000 0x0005c000 0x001000>, /* ap 9 */
+ <0x00058000 0x00058000 0x004000>, /* ap 10 */
+ <0x00062000 0x00062000 0x001000>, /* ap 11 */
+ <0x00063000 0x00063000 0x001000>, /* ap 12 */
+ <0x00008000 0x00008000 0x002000>, /* ap 23 */
+ <0x0000a000 0x0000a000 0x001000>, /* ap 24 */
+ <0x00066000 0x00066000 0x001000>, /* ap 25 */
+ <0x00067000 0x00067000 0x001000>, /* ap 26 */
+ <0x0005e000 0x0005e000 0x002000>, /* ap 80 */
+ <0x00060000 0x00060000 0x001000>, /* ap 81 */
+ <0x00064000 0x00064000 0x001000>, /* ap 86 */
+ <0x00065000 0x00065000 0x001000>; /* ap 87 */
+
+ target-module@2000 { /* 0x4a002000, ap 3 06.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x2000 0x4>,
+ <0x2010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2000 0x1000>;
+
+ omap4_scm_core: scm@0 {
+ compatible = "ti,omap4-scm-core", "simple-bus";
+ reg = <0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000>;
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ omap_control_usb2phy: control-phy@300 {
+ compatible = "ti,control-phy-usb2";
+ reg = <0x300 0x4>;
+ reg-names = "power";
+ };
+
+ omap_control_usbotg: control-phy@33c {
+ compatible = "ti,control-phy-otghs";
+ reg = <0x33c 0x4>;
+ reg-names = "otghs_control";
+ };
+ };
+ };
+
+ target-module@4000 { /* 0x4a004000, ap 5 02.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x4000 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+
+ cm1: cm1@0 {
+ compatible = "ti,omap4-cm1", "simple-bus";
+ reg = <0x0 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x2000>;
+
+ cm1_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm1_clockdomains: clockdomains {
+ };
+ };
+ };
+
+ target-module@8000 { /* 0x4a008000, ap 23 32.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x8000 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8000 0x2000>;
+
+ cm2: cm2@0 {
+ compatible = "ti,omap4-cm2", "simple-bus";
+ reg = <0x0 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x2000>;
+
+ cm2_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm2_clockdomains: clockdomains {
+ };
+ };
+ };
+
+ target-module@56000 { /* 0x4a056000, ap 7 0a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x56000 0x4>,
+ <0x5602c 0x4>,
+ <0x56028 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l3_dma_clkdm */
+ clocks = <&l3_dma_clkctrl OMAP4_DMA_SYSTEM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x56000 0x1000>;
+
+ sdma: dma-controller@0 {
+ compatible = "ti,omap4430-sdma", "ti,omap-sdma";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <32>;
+ dma-requests = <127>;
+ };
+ };
+
+ target-module@58000 { /* 0x4a058000, ap 10 0e.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x58000 0x4>,
+ <0x58010 0x4>,
+ <0x58014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+ clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x58000 0x5000>;
+
+ hsi: hsi@0 {
+ compatible = "ti,omap4-hsi";
+ reg = <0x0 0x4000>,
+ <0x5000 0x1000>;
+ reg-names = "sys", "gdd";
+
+ clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>;
+ clock-names = "hsi_fck";
+
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gdd_mpu";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x4000>;
+
+ hsi_port1: hsi-port@2000 {
+ compatible = "ti,omap4-hsi-port";
+ reg = <0x2000 0x800>,
+ <0x2800 0x800>;
+ reg-names = "tx", "rx";
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ hsi_port2: hsi-port@3000 {
+ compatible = "ti,omap4-hsi-port";
+ reg = <0x3000 0x800>,
+ <0x3800 0x800>;
+ reg-names = "tx", "rx";
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+
+ target-module@5e000 { /* 0x4a05e000, ap 80 68.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5e000 0x2000>;
+ };
+
+ target-module@62000 { /* 0x4a062000, ap 11 16.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x62000 0x4>,
+ <0x62010 0x4>,
+ <0x62014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+ clocks = <&l3_init_clkctrl OMAP4_USB_TLL_HS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x62000 0x1000>;
+
+ usbhstll: usbhstll@0 {
+ compatible = "ti,usbhs-tll";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@64000 { /* 0x4a064000, ap 86 1e.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x64000 0x4>,
+ <0x64010 0x4>,
+ <0x64014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+ clocks = <&l3_init_clkctrl OMAP4_USB_HOST_HS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x64000 0x1000>;
+
+ usbhshost: usbhshost@0 {
+ compatible = "ti,usbhs-host";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000>;
+ clocks = <&init_60m_fclk>,
+ <&xclk60mhsp1_ck>,
+ <&xclk60mhsp2_ck>;
+ clock-names = "refclk_60m_int",
+ "refclk_60m_ext_p1",
+ "refclk_60m_ext_p2";
+
+ usbhsohci: ohci@800 {
+ compatible = "ti,ohci-omap3";
+ reg = <0x800 0x400>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ remote-wakeup-connected;
+ };
+
+ usbhsehci: ehci@c00 {
+ compatible = "ti,ehci-omap";
+ reg = <0xc00 0x400>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+
+ target-module@66000 { /* 0x4a066000, ap 25 26.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x66000 0x4>,
+ <0x66010 0x4>,
+ <0x66014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */
+ clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
+ clock-names = "fck";
+ power-domains = <&prm_tesla>;
+ resets = <&prm_tesla 1>;
+ reset-names = "rstctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x66000 0x1000>;
+
+ mmu_dsp: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ };
+ };
+ };
+
+ segment@80000 { /* 0x4a080000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */
+ <0x0005a000 0x000da000 0x001000>, /* ap 14 */
+ <0x0005b000 0x000db000 0x001000>, /* ap 15 */
+ <0x0005c000 0x000dc000 0x001000>, /* ap 16 */
+ <0x0005d000 0x000dd000 0x001000>, /* ap 17 */
+ <0x0005e000 0x000de000 0x001000>, /* ap 18 */
+ <0x00060000 0x000e0000 0x001000>, /* ap 19 */
+ <0x00061000 0x000e1000 0x001000>, /* ap 20 */
+ <0x00074000 0x000f4000 0x001000>, /* ap 27 */
+ <0x00075000 0x000f5000 0x001000>, /* ap 28 */
+ <0x00076000 0x000f6000 0x001000>, /* ap 29 */
+ <0x00077000 0x000f7000 0x001000>, /* ap 30 */
+ <0x00036000 0x000b6000 0x001000>, /* ap 69 */
+ <0x00037000 0x000b7000 0x001000>, /* ap 70 */
+ <0x0004d000 0x000cd000 0x001000>, /* ap 78 */
+ <0x0004e000 0x000ce000 0x001000>, /* ap 79 */
+ <0x00029000 0x000a9000 0x001000>, /* ap 82 */
+ <0x0002a000 0x000aa000 0x001000>, /* ap 83 */
+ <0x0002b000 0x000ab000 0x001000>, /* ap 84 */
+ <0x0002c000 0x000ac000 0x001000>, /* ap 85 */
+ <0x0002d000 0x000ad000 0x001000>, /* ap 88 */
+ <0x0002e000 0x000ae000 0x001000>; /* ap 89 */
+
+ target-module@29000 { /* 0x4a0a9000, ap 82 04.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x29000 0x1000>;
+ };
+
+ target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x2b400 0x4>,
+ <0x2b404 0x4>,
+ <0x2b408 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+ clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2b000 0x1000>;
+
+ usb_otg_hs: usb_otg_hs@0 {
+ compatible = "ti,omap4-musb";
+ reg = <0x0 0x7ff>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc", "dma";
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ multipoint = <1>;
+ num-eps = <16>;
+ ram-bits = <12>;
+ ctrl-module = <&omap_control_usbotg>;
+ };
+ };
+
+ target-module@2d000 { /* 0x4a0ad000, ap 88 0c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x2d000 0x4>,
+ <0x2d010 0x4>,
+ <0x2d014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+ clocks = <&l3_init_clkctrl OMAP4_OCP2SCP_USB_PHY_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2d000 0x1000>;
+
+ ocp2scp@0 {
+ compatible = "ti,omap-ocp2scp";
+ reg = <0x0 0x1f>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000>;
+ usb2_phy: usb2phy@80 {
+ compatible = "ti,omap-usb2";
+ reg = <0x80 0x58>;
+ ctrl-module = <&omap_control_usb2phy>;
+ clocks = <&usb_phy_cm_clk32k>;
+ clock-names = "wkupclk";
+ #phy-cells = <0>;
+ };
+ };
+ };
+
+ /* d2d mdm */
+ target-module@36000 { /* 0x4a0b6000, ap 69 60.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x36000 0x4>,
+ <0x36010 0x4>,
+ <0x36014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */
+ clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x36000 0x1000>;
+ };
+
+ /* d2d mpu */
+ target-module@4d000 { /* 0x4a0cd000, ap 78 58.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4d000 0x4>,
+ <0x4d010 0x4>,
+ <0x4d014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */
+ clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4d000 0x1000>;
+ };
+
+ target-module@59000 { /* 0x4a0d9000, ap 13 1a.0 */
+ compatible = "ti,sysc-omap4-sr", "ti,sysc";
+ reg = <0x59038 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
+ clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x59000 0x1000>;
+
+ smartreflex_mpu: smartreflex@0 {
+ compatible = "ti,omap4-smartreflex-mpu";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@5b000 { /* 0x4a0db000, ap 15 08.0 */
+ compatible = "ti,sysc-omap4-sr", "ti,sysc";
+ reg = <0x5b038 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
+ clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5b000 0x1000>;
+
+ smartreflex_iva: smartreflex@0 {
+ compatible = "ti,omap4-smartreflex-iva";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@5d000 { /* 0x4a0dd000, ap 17 22.0 */
+ compatible = "ti,sysc-omap4-sr", "ti,sysc";
+ reg = <0x5d038 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
+ clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5d000 0x1000>;
+
+ smartreflex_core: smartreflex@0 {
+ compatible = "ti,omap4-smartreflex-core";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@60000 { /* 0x4a0e0000, ap 19 1c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x60000 0x1000>;
+ };
+
+ target-module@74000 { /* 0x4a0f4000, ap 27 24.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x74000 0x4>,
+ <0x74010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+ clocks = <&l4_cfg_clkctrl OMAP4_MAILBOX_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x74000 0x1000>;
+
+ mailbox: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <3>;
+ ti,mbox-num-fifos = <8>;
+ mbox_ipu: mbox-ipu {
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <1 0 0>;
+ };
+ mbox_dsp: mbox-dsp {
+ ti,mbox-tx = <3 0 0>;
+ ti,mbox-rx = <2 0 0>;
+ };
+ };
+ };
+
+ target-module@76000 { /* 0x4a0f6000, ap 29 3a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x76000 0x4>,
+ <0x76010 0x4>,
+ <0x76014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+ clocks = <&l4_cfg_clkctrl OMAP4_SPINLOCK_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x76000 0x1000>;
+
+ hwspinlock: spinlock@0 {
+ compatible = "ti,omap4-hwspinlock";
+ reg = <0x0 0x1000>;
+ #hwlock-cells = <1>;
+ };
+ };
+ };
+
+ segment@100000 { /* 0x4a100000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00100000 0x001000>, /* ap 21 */
+ <0x00001000 0x00101000 0x001000>, /* ap 22 */
+ <0x00002000 0x00102000 0x001000>, /* ap 61 */
+ <0x00003000 0x00103000 0x001000>, /* ap 62 */
+ <0x00008000 0x00108000 0x001000>, /* ap 63 */
+ <0x00009000 0x00109000 0x001000>, /* ap 64 */
+ <0x0000a000 0x0010a000 0x001000>, /* ap 65 */
+ <0x0000b000 0x0010b000 0x001000>; /* ap 66 */
+
+ target-module@0 { /* 0x4a100000, ap 21 2a.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x0 0x4>,
+ <0x10 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+
+ omap4_pmx_core: pinmux@40 {
+ compatible = "ti,omap4-padconf",
+ "pinctrl-single";
+ reg = <0x40 0x0196>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+
+ omap4_padconf_global: omap4_padconf_global@5a0 {
+ compatible = "syscon",
+ "simple-bus";
+ reg = <0x5a0 0x170>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5a0 0x170>;
+
+ pbias_regulator: pbias_regulator@60 {
+ compatible = "ti,pbias-omap4", "ti,pbias-omap";
+ reg = <0x60 0x4>;
+ syscon = <&omap4_padconf_global>;
+ pbias_mmc_reg: pbias_mmc_omap4 {
+ regulator-name = "pbias_mmc_omap4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+ };
+
+ target-module@2000 { /* 0x4a102000, ap 61 3c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2000 0x1000>;
+ };
+
+ target-module@8000 { /* 0x4a108000, ap 63 62.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8000 0x1000>;
+ };
+
+ target-module@a000 { /* 0x4a10a000, ap 65 50.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xa000 0x4>,
+ <0xa010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-delay-us = <2>;
+ /* Domains (V, P, C): core, cam_pwrdm, iss_clkdm */
+ clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa000 0x1000>;
+
+ /* No child device binding or driver in mainline */
+ };
+ };
+
+ segment@180000 { /* 0x4a180000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ segment@200000 { /* 0x4a200000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 31 */
+ <0x0001f000 0x0021f000 0x001000>, /* ap 32 */
+ <0x0000a000 0x0020a000 0x001000>, /* ap 33 */
+ <0x0000b000 0x0020b000 0x001000>, /* ap 34 */
+ <0x00004000 0x00204000 0x001000>, /* ap 35 */
+ <0x00005000 0x00205000 0x001000>, /* ap 36 */
+ <0x00006000 0x00206000 0x001000>, /* ap 37 */
+ <0x00007000 0x00207000 0x001000>, /* ap 38 */
+ <0x00012000 0x00212000 0x001000>, /* ap 39 */
+ <0x00013000 0x00213000 0x001000>, /* ap 40 */
+ <0x0000c000 0x0020c000 0x001000>, /* ap 41 */
+ <0x0000d000 0x0020d000 0x001000>, /* ap 42 */
+ <0x00010000 0x00210000 0x001000>, /* ap 43 */
+ <0x00011000 0x00211000 0x001000>, /* ap 44 */
+ <0x00016000 0x00216000 0x001000>, /* ap 45 */
+ <0x00017000 0x00217000 0x001000>, /* ap 46 */
+ <0x00014000 0x00214000 0x001000>, /* ap 47 */
+ <0x00015000 0x00215000 0x001000>, /* ap 48 */
+ <0x00018000 0x00218000 0x001000>, /* ap 49 */
+ <0x00019000 0x00219000 0x001000>, /* ap 50 */
+ <0x00020000 0x00220000 0x001000>, /* ap 51 */
+ <0x00021000 0x00221000 0x001000>, /* ap 52 */
+ <0x00026000 0x00226000 0x001000>, /* ap 53 */
+ <0x00027000 0x00227000 0x001000>, /* ap 54 */
+ <0x00028000 0x00228000 0x001000>, /* ap 55 */
+ <0x00029000 0x00229000 0x001000>, /* ap 56 */
+ <0x0002a000 0x0022a000 0x001000>, /* ap 57 */
+ <0x0002b000 0x0022b000 0x001000>, /* ap 58 */
+ <0x0001c000 0x0021c000 0x001000>, /* ap 59 */
+ <0x0001d000 0x0021d000 0x001000>; /* ap 60 */
+
+ target-module@4000 { /* 0x4a204000, ap 35 42.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+ };
+
+ target-module@6000 { /* 0x4a206000, ap 37 4a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6000 0x1000>;
+ };
+
+ target-module@a000 { /* 0x4a20a000, ap 33 2c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa000 0x1000>;
+ };
+
+ target-module@c000 { /* 0x4a20c000, ap 41 20.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc000 0x1000>;
+ };
+
+ target-module@10000 { /* 0x4a210000, ap 43 52.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000 0x1000>;
+ };
+
+ target-module@12000 { /* 0x4a212000, ap 39 18.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x12000 0x1000>;
+ };
+
+ target-module@14000 { /* 0x4a214000, ap 47 30.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x14000 0x1000>;
+ };
+
+ target-module@16000 { /* 0x4a216000, ap 45 28.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x16000 0x1000>;
+ };
+
+ target-module@18000 { /* 0x4a218000, ap 49 38.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x18000 0x1000>;
+ };
+
+ target-module@1c000 { /* 0x4a21c000, ap 59 5a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1c000 0x1000>;
+ };
+
+ target-module@1e000 { /* 0x4a21e000, ap 31 10.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e000 0x1000>;
+ };
+
+ target-module@20000 { /* 0x4a220000, ap 51 40.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x20000 0x1000>;
+ };
+
+ target-module@26000 { /* 0x4a226000, ap 53 34.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x1000>;
+ };
+
+ target-module@28000 { /* 0x4a228000, ap 55 2e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x28000 0x1000>;
+ };
+
+ target-module@2a000 { /* 0x4a22a000, ap 57 48.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2a000 0x1000>;
+ };
+ };
+
+ segment@280000 { /* 0x4a280000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ l4_cfg_segment_300000: segment@300000 { /* 0x4a300000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */
+ <0x00040000 0x00340000 0x001000>, /* ap 68 */
+ <0x00020000 0x00320000 0x004000>, /* ap 71 */
+ <0x00024000 0x00324000 0x002000>, /* ap 72 */
+ <0x00026000 0x00326000 0x001000>, /* ap 73 */
+ <0x00027000 0x00327000 0x001000>, /* ap 74 */
+ <0x00028000 0x00328000 0x001000>, /* ap 75 */
+ <0x00029000 0x00329000 0x001000>, /* ap 76 */
+ <0x00030000 0x00330000 0x010000>, /* ap 77 */
+ <0x0002a000 0x0032a000 0x002000>, /* ap 90 */
+ <0x0002c000 0x0032c000 0x004000>; /* ap 91 */
+
+ l4_cfg_target_0: target-module@0 { /* 0x4a300000, ap 67 14.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x00020000>,
+ <0x00020000 0x00020000 0x00004000>,
+ <0x00024000 0x00024000 0x00002000>,
+ <0x00026000 0x00026000 0x00001000>,
+ <0x00027000 0x00027000 0x00001000>,
+ <0x00028000 0x00028000 0x00001000>,
+ <0x00029000 0x00029000 0x00001000>,
+ <0x0002a000 0x0002a000 0x00002000>,
+ <0x0002c000 0x0002c000 0x00004000>,
+ <0x00030000 0x00030000 0x00010000>;
+ };
+ };
+};
+
+&l4_wkup { /* 0x4a300000 */
+ compatible = "ti,omap4-l4-wkup", "simple-pm-bus";
+ power-domains = <&prm_wkup>;
+ clocks = <&l4_wkup_clkctrl OMAP4_L4_WKUP_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x4a300000 0x800>,
+ <0x4a300800 0x800>,
+ <0x4a301000 0x1000>;
+ reg-names = "ap", "la", "ia0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4a300000 0x010000>, /* segment 0 */
+ <0x00010000 0x4a310000 0x010000>, /* segment 1 */
+ <0x00020000 0x4a320000 0x010000>; /* segment 2 */
+
+ segment@0 { /* 0x4a300000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00001000 0x00001000 0x001000>, /* ap 1 */
+ <0x00000800 0x00000800 0x000800>, /* ap 2 */
+ <0x00006000 0x00006000 0x002000>, /* ap 3 */
+ <0x00008000 0x00008000 0x001000>, /* ap 4 */
+ <0x0000a000 0x0000a000 0x001000>, /* ap 15 */
+ <0x0000b000 0x0000b000 0x001000>, /* ap 16 */
+ <0x00004000 0x00004000 0x001000>, /* ap 17 */
+ <0x00005000 0x00005000 0x001000>, /* ap 18 */
+ <0x0000c000 0x0000c000 0x001000>, /* ap 19 */
+ <0x0000d000 0x0000d000 0x001000>; /* ap 20 */
+
+ target-module@4000 { /* 0x4a304000, ap 17 24.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4000 0x4>,
+ <0x4004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl OMAP4_COUNTER_32K_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+
+ counter32k: counter@0 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x0 0x20>;
+ };
+ };
+
+ target-module@6000 { /* 0x4a306000, ap 3 08.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x6000 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6000 0x2000>;
+
+ prm: prm@0 {
+ compatible = "ti,omap4-prm", "simple-bus";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x2000>;
+
+ prm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prm_clockdomains: clockdomains {
+ };
+ };
+ };
+
+ target-module@a000 { /* 0x4a30a000, ap 15 34.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xa000 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa000 0x1000>;
+
+ scrm: scrm@0 {
+ compatible = "ti,omap4-scrm";
+ reg = <0x0 0x2000>;
+
+ scrm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ scrm_clockdomains: clockdomains {
+ };
+ };
+ };
+
+ target-module@c000 { /* 0x4a30c000, ap 19 2c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xc000 0x4>,
+ <0xc010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc000 0x1000>;
+
+ omap4_scm_wkup: scm@c000 {
+ compatible = "ti,omap4-scm-wkup";
+ reg = <0xc000 0x1000>;
+ };
+ };
+ };
+
+ segment@10000 { /* 0x4a310000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */
+ <0x00001000 0x00011000 0x001000>, /* ap 6 */
+ <0x00004000 0x00014000 0x001000>, /* ap 7 */
+ <0x00005000 0x00015000 0x001000>, /* ap 8 */
+ <0x00008000 0x00018000 0x001000>, /* ap 9 */
+ <0x00009000 0x00019000 0x001000>, /* ap 10 */
+ <0x0000c000 0x0001c000 0x001000>, /* ap 11 */
+ <0x0000d000 0x0001d000 0x001000>, /* ap 12 */
+ <0x0000e000 0x0001e000 0x001000>, /* ap 21 */
+ <0x0000f000 0x0001f000 0x001000>; /* ap 22 */
+
+ gpio1_target: target-module@0 { /* 0x4a310000, ap 5 14.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x0 0x4>,
+ <0x10 0x4>,
+ <0x114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 0>,
+ <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+
+ gpio1: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ ti,gpio-always-on;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@4000 { /* 0x4a314000, ap 7 18.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4000 0x4>,
+ <0x4010 0x4>,
+ <0x4014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl OMAP4_WD_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+
+ wdt2: wdt@0 {
+ compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ timer1_target: target-module@8000 { /* 0x4a318000, ap 9 1c.0 */
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x8000 0x4>,
+ <0x8010 0x4>,
+ <0x8014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>,
+ <&sys_clkin_ck>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-alwon;
+ };
+ };
+
+ target-module@c000 { /* 0x4a31c000, ap 11 20.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xc000 0x4>,
+ <0xc010 0x4>,
+ <0xc014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl OMAP4_KBD_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc000 0x1000>;
+
+ keypad: keypad@0 {
+ compatible = "ti,omap4-keypad";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ reg-names = "mpu";
+ };
+ };
+
+ target-module@e000 { /* 0x4a31e000, ap 21 30.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xe000 0x4>,
+ <0xe010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe000 0x1000>;
+
+ omap4_pmx_wkup: pinmux@40 {
+ compatible = "ti,omap4-padconf",
+ "pinctrl-single";
+ reg = <0x40 0x0038>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+ };
+ };
+
+ segment@20000 { /* 0x4a320000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */
+ <0x0000a000 0x0002a000 0x001000>, /* ap 14 */
+ <0x00000000 0x00020000 0x001000>, /* ap 23 */
+ <0x00001000 0x00021000 0x001000>, /* ap 24 */
+ <0x00002000 0x00022000 0x001000>, /* ap 25 */
+ <0x00003000 0x00023000 0x001000>, /* ap 26 */
+ <0x00004000 0x00024000 0x001000>, /* ap 27 */
+ <0x00005000 0x00025000 0x001000>, /* ap 28 */
+ <0x00007000 0x00027000 0x000400>, /* ap 29 */
+ <0x00008000 0x00028000 0x000800>, /* ap 30 */
+ <0x00009000 0x00029000 0x000400>; /* ap 31 */
+
+ target-module@0 { /* 0x4a320000, ap 23 04.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+ };
+
+ target-module@2000 { /* 0x4a322000, ap 25 0c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2000 0x1000>;
+ };
+
+ target-module@4000 { /* 0x4a324000, ap 27 10.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+ };
+
+ target-module@6000 { /* 0x4a326000, ap 13 28.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00006000 0x00001000>,
+ <0x00001000 0x00007000 0x00000400>,
+ <0x00002000 0x00008000 0x00000800>,
+ <0x00003000 0x00009000 0x00000400>;
+ };
+ };
+};
+
+&l4_per { /* 0x48000000 */
+ compatible = "ti,omap4-l4-per", "simple-pm-bus";
+ power-domains = <&prm_l4per>;
+ clocks = <&l4_per_clkctrl OMAP4_L4_PER_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x48000000 0x800>,
+ <0x48000800 0x800>,
+ <0x48001000 0x400>,
+ <0x48001400 0x400>,
+ <0x48001800 0x400>,
+ <0x48001c00 0x400>;
+ reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */
+ <0x00200000 0x48200000 0x200000>; /* segment 1 */
+
+ segment@0 { /* 0x48000000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00001000 0x00001000 0x000400>, /* ap 1 */
+ <0x00000800 0x00000800 0x000800>, /* ap 2 */
+ <0x00020000 0x00020000 0x001000>, /* ap 3 */
+ <0x00021000 0x00021000 0x001000>, /* ap 4 */
+ <0x00032000 0x00032000 0x001000>, /* ap 5 */
+ <0x00033000 0x00033000 0x001000>, /* ap 6 */
+ <0x00034000 0x00034000 0x001000>, /* ap 7 */
+ <0x00035000 0x00035000 0x001000>, /* ap 8 */
+ <0x00036000 0x00036000 0x001000>, /* ap 9 */
+ <0x00037000 0x00037000 0x001000>, /* ap 10 */
+ <0x0003e000 0x0003e000 0x001000>, /* ap 11 */
+ <0x0003f000 0x0003f000 0x001000>, /* ap 12 */
+ <0x00040000 0x00040000 0x010000>, /* ap 13 */
+ <0x00050000 0x00050000 0x001000>, /* ap 14 */
+ <0x00055000 0x00055000 0x001000>, /* ap 15 */
+ <0x00056000 0x00056000 0x001000>, /* ap 16 */
+ <0x00057000 0x00057000 0x001000>, /* ap 17 */
+ <0x00058000 0x00058000 0x001000>, /* ap 18 */
+ <0x00059000 0x00059000 0x001000>, /* ap 19 */
+ <0x0005a000 0x0005a000 0x001000>, /* ap 20 */
+ <0x0005b000 0x0005b000 0x001000>, /* ap 21 */
+ <0x0005c000 0x0005c000 0x001000>, /* ap 22 */
+ <0x0005d000 0x0005d000 0x001000>, /* ap 23 */
+ <0x0005e000 0x0005e000 0x001000>, /* ap 24 */
+ <0x00060000 0x00060000 0x001000>, /* ap 25 */
+ <0x0006a000 0x0006a000 0x001000>, /* ap 26 */
+ <0x0006b000 0x0006b000 0x001000>, /* ap 27 */
+ <0x0006c000 0x0006c000 0x001000>, /* ap 28 */
+ <0x0006d000 0x0006d000 0x001000>, /* ap 29 */
+ <0x0006e000 0x0006e000 0x001000>, /* ap 30 */
+ <0x0006f000 0x0006f000 0x001000>, /* ap 31 */
+ <0x00070000 0x00070000 0x001000>, /* ap 32 */
+ <0x00071000 0x00071000 0x001000>, /* ap 33 */
+ <0x00072000 0x00072000 0x001000>, /* ap 34 */
+ <0x00073000 0x00073000 0x001000>, /* ap 35 */
+ <0x00061000 0x00061000 0x001000>, /* ap 36 */
+ <0x00096000 0x00096000 0x001000>, /* ap 37 */
+ <0x00097000 0x00097000 0x001000>, /* ap 38 */
+ <0x00076000 0x00076000 0x001000>, /* ap 39 */
+ <0x00077000 0x00077000 0x001000>, /* ap 40 */
+ <0x00078000 0x00078000 0x001000>, /* ap 41 */
+ <0x00079000 0x00079000 0x001000>, /* ap 42 */
+ <0x00086000 0x00086000 0x001000>, /* ap 43 */
+ <0x00087000 0x00087000 0x001000>, /* ap 44 */
+ <0x00088000 0x00088000 0x001000>, /* ap 45 */
+ <0x00089000 0x00089000 0x001000>, /* ap 46 */
+ <0x000b0000 0x000b0000 0x001000>, /* ap 47 */
+ <0x000b1000 0x000b1000 0x001000>, /* ap 48 */
+ <0x00098000 0x00098000 0x001000>, /* ap 49 */
+ <0x00099000 0x00099000 0x001000>, /* ap 50 */
+ <0x0009a000 0x0009a000 0x001000>, /* ap 51 */
+ <0x0009b000 0x0009b000 0x001000>, /* ap 52 */
+ <0x0009c000 0x0009c000 0x001000>, /* ap 53 */
+ <0x0009d000 0x0009d000 0x001000>, /* ap 54 */
+ <0x0009e000 0x0009e000 0x001000>, /* ap 55 */
+ <0x0009f000 0x0009f000 0x001000>, /* ap 56 */
+ <0x00090000 0x00090000 0x002000>, /* ap 57 */
+ <0x00092000 0x00092000 0x001000>, /* ap 58 */
+ <0x000a4000 0x000a4000 0x001000>, /* ap 59 */
+ <0x000a6000 0x000a6000 0x001000>, /* ap 60 */
+ <0x000a8000 0x000a8000 0x004000>, /* ap 61 */
+ <0x000ac000 0x000ac000 0x001000>, /* ap 62 */
+ <0x000ad000 0x000ad000 0x001000>, /* ap 63 */
+ <0x000ae000 0x000ae000 0x001000>, /* ap 64 */
+ <0x000b2000 0x000b2000 0x001000>, /* ap 65 */
+ <0x000b3000 0x000b3000 0x001000>, /* ap 66 */
+ <0x000b4000 0x000b4000 0x001000>, /* ap 67 */
+ <0x000b5000 0x000b5000 0x001000>, /* ap 68 */
+ <0x000b8000 0x000b8000 0x001000>, /* ap 69 */
+ <0x000b9000 0x000b9000 0x001000>, /* ap 70 */
+ <0x000ba000 0x000ba000 0x001000>, /* ap 71 */
+ <0x000bb000 0x000bb000 0x001000>, /* ap 72 */
+ <0x000d1000 0x000d1000 0x001000>, /* ap 73 */
+ <0x000d2000 0x000d2000 0x001000>, /* ap 74 */
+ <0x000d5000 0x000d5000 0x001000>, /* ap 75 */
+ <0x000d6000 0x000d6000 0x001000>, /* ap 76 */
+ <0x000a2000 0x000a2000 0x001000>, /* ap 79 */
+ <0x000a3000 0x000a3000 0x001000>, /* ap 80 */
+ <0x00001400 0x00001400 0x000400>, /* ap 81 */
+ <0x00001800 0x00001800 0x000400>, /* ap 82 */
+ <0x00001c00 0x00001c00 0x000400>, /* ap 83 */
+ <0x000a5000 0x000a5000 0x001000>; /* ap 84 */
+
+ target-module@20000 { /* 0x48020000, ap 3 06.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x20050 0x4>,
+ <0x20054 0x4>,
+ <0x20058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_UART3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x20000 0x1000>;
+
+ uart3: serial@0 {
+ compatible = "ti,omap4-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ };
+ };
+
+ target-module@32000 { /* 0x48032000, ap 5 02.0 */
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x32000 0x4>,
+ <0x32010 0x4>,
+ <0x32014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x32000 0x1000>;
+
+ timer2: timer@0 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 24>,
+ <&sys_clkin_ck>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@34000 { /* 0x48034000, ap 7 04.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x34000 0x4>,
+ <0x34010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x34000 0x1000>;
+
+ timer3: timer@0 {
+ compatible = "ti,omap4430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 24>,
+ <&sys_clkin_ck>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@36000 { /* 0x48036000, ap 9 0e.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x36000 0x4>,
+ <0x36010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x36000 0x1000>;
+
+ timer4: timer@0 {
+ compatible = "ti,omap4430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 24>,
+ <&sys_clkin_ck>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@3e000 { /* 0x4803e000, ap 11 08.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x3e000 0x4>,
+ <0x3e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3e000 0x1000>;
+
+ timer9: timer@0 {
+ compatible = "ti,omap4430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>,
+ <&sys_clkin_ck>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ };
+ };
+
+ /* Unused DSS L4 access, see L3 instead */
+ target-module@40000 { /* 0x48040000, ap 13 0a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x40000 0x10000>;
+ };
+
+ target-module@55000 { /* 0x48055000, ap 15 0c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55000 0x4>,
+ <0x55010 0x4>,
+ <0x55114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 0>,
+ <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x55000 0x1000>;
+
+ gpio2: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@57000 { /* 0x48057000, ap 17 16.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x57000 0x4>,
+ <0x57010 0x4>,
+ <0x57114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 0>,
+ <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x57000 0x1000>;
+
+ gpio3: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@59000 { /* 0x48059000, ap 19 10.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x59000 0x4>,
+ <0x59010 0x4>,
+ <0x59114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 0>,
+ <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x59000 0x1000>;
+
+ gpio4: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@5b000 { /* 0x4805b000, ap 21 12.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x5b000 0x4>,
+ <0x5b010 0x4>,
+ <0x5b114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 0>,
+ <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5b000 0x1000>;
+
+ gpio5: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@5d000 { /* 0x4805d000, ap 23 14.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x5d000 0x4>,
+ <0x5d010 0x4>,
+ <0x5d114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 0>,
+ <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5d000 0x1000>;
+
+ gpio6: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@60000 { /* 0x48060000, ap 25 1e.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x60000 0x8>,
+ <0x60010 0x8>,
+ <0x60090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_I2C3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x60000 0x1000>;
+
+ i2c3: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ target-module@6a000 { /* 0x4806a000, ap 26 18.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x6a050 0x4>,
+ <0x6a054 0x4>,
+ <0x6a058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_UART1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6a000 0x1000>;
+
+ uart1: serial@0 {
+ compatible = "ti,omap4-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ };
+ };
+
+ target-module@6c000 { /* 0x4806c000, ap 28 20.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x6c050 0x4>,
+ <0x6c054 0x4>,
+ <0x6c058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_UART2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6c000 0x1000>;
+
+ uart2: serial@0 {
+ compatible = "ti,omap4-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ };
+ };
+
+ target-module@6e000 { /* 0x4806e000, ap 30 1c.1 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x6e050 0x4>,
+ <0x6e054 0x4>,
+ <0x6e058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_UART4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6e000 0x1000>;
+
+ uart4: serial@0 {
+ compatible = "ti,omap4-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ };
+ };
+
+ target-module@70000 { /* 0x48070000, ap 32 28.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x70000 0x8>,
+ <0x70010 0x8>,
+ <0x70090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_I2C1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x70000 0x1000>;
+
+ i2c1: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ target-module@72000 { /* 0x48072000, ap 34 30.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x72000 0x8>,
+ <0x72010 0x8>,
+ <0x72090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_I2C2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x72000 0x1000>;
+
+ i2c2: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ target-module@76000 { /* 0x48076000, ap 39 38.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x76000 0x4>,
+ <0x76010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x76000 0x1000>;
+
+ /* No child device binding or driver in mainline */
+ };
+
+ target-module@78000 { /* 0x48078000, ap 41 1a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x78000 0x4>,
+ <0x78010 0x4>,
+ <0x78014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_ELM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x78000 0x1000>;
+
+ elm: elm@0 {
+ compatible = "ti,am3352-elm";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ target-module@86000 { /* 0x48086000, ap 43 24.0 */
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x86000 0x4>,
+ <0x86010 0x4>,
+ <0x86014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x86000 0x1000>;
+
+ timer10: timer@0 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 24>,
+ <&sys_clkin_ck>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ };
+ };
+
+ target-module@88000 { /* 0x48088000, ap 45 2e.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x88000 0x4>,
+ <0x88010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x88000 0x1000>;
+
+ timer11: timer@0 {
+ compatible = "ti,omap4430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 24>,
+ <&sys_clkin_ck>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ };
+ };
+
+ rng_target: target-module@90000 { /* 0x48090000, ap 57 2a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x91fe0 0x4>,
+ <0x91fe4 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+ clocks = <&l4_secure_clkctrl OMAP4_RNG_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x90000 0x2000>;
+
+ rng: rng@0 {
+ compatible = "ti,omap4-rng";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@96000 { /* 0x48096000, ap 37 26.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x9608c 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_MCBSP4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x96000 0x1000>;
+
+ mcbsp4: mcbsp@0 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x0 0xff>; /* L4 Interconnect */
+ reg-names = "mpu";
+ clocks = <&l4_per_clkctrl OMAP4_MCBSP4_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "common";
+ ti,buffer-size = <128>;
+ dmas = <&sdma 31>,
+ <&sdma 32>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ target-module@98000 { /* 0x48098000, ap 49 22.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x98000 0x4>,
+ <0x98010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_MCSPI1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x98000 0x1000>;
+
+ mcspi1: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,spi-num-cs = <4>;
+ dmas = <&sdma 35>,
+ <&sdma 36>,
+ <&sdma 37>,
+ <&sdma 38>,
+ <&sdma 39>,
+ <&sdma 40>,
+ <&sdma 41>,
+ <&sdma 42>;
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
+ };
+ };
+
+ target-module@9a000 { /* 0x4809a000, ap 51 2c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x9a000 0x4>,
+ <0x9a010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_MCSPI2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x9a000 0x1000>;
+
+ mcspi2: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,spi-num-cs = <2>;
+ dmas = <&sdma 43>,
+ <&sdma 44>,
+ <&sdma 45>,
+ <&sdma 46>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
+ };
+
+ target-module@9c000 { /* 0x4809c000, ap 53 36.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x9c000 0x4>,
+ <0x9c010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+ clocks = <&l3_init_clkctrl OMAP4_MMC1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x9c000 0x1000>;
+
+ mmc1: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ ti,dual-volt;
+ ti,needs-special-reset;
+ dmas = <&sdma 61>, <&sdma 62>;
+ dma-names = "tx", "rx";
+ pbias-supply = <&pbias_mmc_reg>;
+ };
+ };
+
+ target-module@9e000 { /* 0x4809e000, ap 55 48.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x9e000 0x1000>;
+ };
+
+ target-module@a2000 { /* 0x480a2000, ap 79 3a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa2000 0x1000>;
+ };
+
+ target-module@a4000 { /* 0x480a4000, ap 59 34.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x000a4000 0x00001000>,
+ <0x00001000 0x000a5000 0x00001000>;
+ };
+
+ des_target: target-module@a5000 { /* 0x480a5000 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xa5030 0x4>,
+ <0xa5034 0x4>,
+ <0xa5038 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+ clocks = <&l4_secure_clkctrl OMAP4_DES3DES_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xa5000 0x00001000>;
+
+ des: des@0 {
+ compatible = "ti,omap4-des";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 117>, <&sdma 116>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@a8000 { /* 0x480a8000, ap 61 3e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa8000 0x4000>;
+ };
+
+ target-module@ad000 { /* 0x480ad000, ap 63 50.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xad000 0x4>,
+ <0xad010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_MMC3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xad000 0x1000>;
+
+ mmc3: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ ti,needs-special-reset;
+ dmas = <&sdma 77>, <&sdma 78>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@b0000 { /* 0x480b0000, ap 47 40.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb0000 0x1000>;
+ };
+
+ target-module@b2000 { /* 0x480b2000, ap 65 3c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xb2000 0x4>,
+ <0xb2014 0x4>,
+ <0xb2018 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ ti,no-reset-on-init;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_HDQ1W_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb2000 0x1000>;
+
+ hdqw1w: 1w@0 {
+ compatible = "ti,omap3-1w";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@b4000 { /* 0x480b4000, ap 67 46.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xb4000 0x4>,
+ <0xb4010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+ clocks = <&l3_init_clkctrl OMAP4_MMC2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb4000 0x1000>;
+
+ mmc2: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ ti,needs-special-reset;
+ dmas = <&sdma 47>, <&sdma 48>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@b8000 { /* 0x480b8000, ap 69 58.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xb8000 0x4>,
+ <0xb8010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_MCSPI3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb8000 0x1000>;
+
+ mcspi3: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,spi-num-cs = <2>;
+ dmas = <&sdma 15>, <&sdma 16>;
+ dma-names = "tx0", "rx0";
+ };
+ };
+
+ target-module@ba000 { /* 0x480ba000, ap 71 32.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xba000 0x4>,
+ <0xba010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_MCSPI4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xba000 0x1000>;
+
+ mcspi4: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,spi-num-cs = <1>;
+ dmas = <&sdma 70>, <&sdma 71>;
+ dma-names = "tx0", "rx0";
+ };
+ };
+
+ target-module@d1000 { /* 0x480d1000, ap 73 44.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xd1000 0x4>,
+ <0xd1010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_MMC4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd1000 0x1000>;
+
+ mmc4: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ ti,needs-special-reset;
+ dmas = <&sdma 57>, <&sdma 58>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@d5000 { /* 0x480d5000, ap 75 4e.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xd5000 0x4>,
+ <0xd5010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_MMC5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd5000 0x1000>;
+
+ mmc5: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ ti,needs-special-reset;
+ dmas = <&sdma 59>, <&sdma 60>;
+ dma-names = "tx", "rx";
+ };
+ };
+ };
+
+ segment@200000 { /* 0x48200000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00150000 0x00350000 0x001000>, /* ap 77 */
+ <0x00151000 0x00351000 0x001000>; /* ap 78 */
+
+ target-module@150000 { /* 0x48350000, ap 77 4c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x150000 0x8>,
+ <0x150010 0x8>,
+ <0x150090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_I2C4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x150000 0x1000>;
+
+ i2c4: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+};
+
diff --git a/src/arm/ti/omap/omap4-mcpdm.dtsi b/src/arm/ti/omap/omap4-mcpdm.dtsi
new file mode 100644
index 0000000..03ade47
--- /dev/null
+++ b/src/arm/ti/omap/omap4-mcpdm.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common omap4 mcpdm configuration
+ *
+ * Only include this file if your board has pdmclk wired from the
+ * pmic to ABE as mcpdm uses an external clock for the module.
+ */
+
+&omap4_pmx_core {
+ mcpdm_pins: mcpdm-pins {
+ pinctrl-single,pins = <
+ /* 0x4a100106 abe_pdm_ul_data.abe_pdm_ul_data ag25 */
+ OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)
+
+ /* 0x4a100108 abe_pdm_dl_data.abe_pdm_dl_data af25 */
+ OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)
+
+ /* 0x4a10010a abe_pdm_frame.abe_pdm_frame ae25 */
+ OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0)
+
+ /* 0x4a10010c abe_pdm_lb_clk.abe_pdm_lb_clk af26 */
+ OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)
+
+ /* 0x4a10010e abe_clks.abe_clks ah26 */
+ OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+};
+
+&mcpdm_module {
+ /*
+ * McPDM pads must be muxed at the interconnect target module
+ * level as the module on the SoC needs external clock from
+ * the PMIC
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcpdm_pins>;
+ status = "okay";
+};
+
+&mcpdm {
+ clocks = <&twl6040>;
+ clock-names = "pdmclk";
+};
diff --git a/src/arm/ti/omap/omap4-panda-a4.dts b/src/arm/ti/omap/omap4-panda-a4.dts
new file mode 100644
index 0000000..8fd076e
--- /dev/null
+++ b/src/arm/ti/omap/omap4-panda-a4.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+#include "omap4-panda-common.dtsi"
+
+/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
+&dss_hdmi_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ >;
+};
diff --git a/src/arm/ti/omap/omap4-panda-common.dtsi b/src/arm/ti/omap/omap4-panda-common.dtsi
new file mode 100644
index 0000000..f528511
--- /dev/null
+++ b/src/arm/ti/omap/omap4-panda-common.dtsi
@@ -0,0 +1,607 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011-2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include <dt-bindings/input/input.h>
+#include "elpida_ecb240abacn.dtsi"
+#include "omap4-mcpdm.dtsi"
+
+/ {
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dsp_memory_region: dsp-memory@98000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x98000000 0x800000>;
+ reusable;
+ status = "okay";
+ };
+
+ ipu_memory_region: ipu-memory@98800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x98800000 0x7000000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ display0 = &dvi0;
+ display1 = &hdmi0;
+ ethernet = ðernet;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &led_wkgpio_pins
+ >;
+
+ led-heartbeat {
+ label = "pandaboard::status1";
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-mmc {
+ label = "pandaboard::status2";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ gpio_keys: gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &button_pins
+ >;
+
+ buttonS2 {
+ label = "button S2";
+ gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */
+ linux,code = <BTN_0>;
+ wakeup-source;
+ };
+ };
+
+ sound: sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "PandaBoard";
+
+ ti,mclk-freq = <38400000>;
+
+ ti,mcpdm = <&mcpdm>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Ext Spk", "HFL",
+ "Ext Spk", "HFR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias",
+ "AFML", "Line In",
+ "AFMR", "Line In";
+ };
+
+ /* HS USB Port 1 Power */
+ hsusb1_power: hsusb1_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ /*
+ * boot-on is required along with always-on as the
+ * regulator framework doesn't enable the regulator
+ * if boot-on is not there.
+ */
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* HS USB Host PHY on PORT 1 */
+ hsusb1_phy: hsusb1_phy {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
+ #phy-cells = <0>;
+ vcc-supply = <&hsusb1_power>;
+ clocks = <&auxclk3_ck>;
+ clock-names = "main_clk";
+ clock-frequency = <19200000>;
+ };
+
+ /* regulator for wl12xx on sdio5 */
+ wl12xx_vmmc: wl12xx_vmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_gpio>;
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ tfp410: encoder0 {
+ compatible = "ti,tfp410";
+ powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ digital;
+
+ ddc-i2c-bus = <&i2c3>;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
+ tpd12s015: encoder1 {
+ compatible = "ti,tpd12s015";
+
+ gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
+ <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
+ <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ hdmi0: connector1 {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+};
+
+&omap4_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_dpi_pins
+ &tfp410_pins
+ &dss_hdmi_pins
+ &tpd12s015_pins
+ &hsusbb1_pins
+ >;
+
+ twl6040_pins: twl6040-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
+ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
+ >;
+ };
+
+ mcbsp1_pins: mcbsp1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+ OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
+ OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
+ OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+ >;
+ };
+
+ dss_dpi_pins: dss-dpi-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */
+ OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */
+ OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */
+ OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */
+ OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */
+ OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */
+ OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */
+ OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */
+ OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */
+ OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */
+ OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */
+
+ OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */
+ OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */
+ OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */
+ OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */
+ OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */
+ OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */
+ OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */
+ OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5) /* dispc2_de */
+ OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */
+ OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */
+ OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */
+ OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */
+ OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */
+ OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */
+
+ OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */
+ OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */
+ OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */
+ >;
+ };
+
+ tfp410_pins: tfp410-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3) /* gpio_0 */
+ >;
+ };
+
+ dss_hdmi_pins: dss-hdmi-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ >;
+ };
+
+ tpd12s015_pins: tpd12s015-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
+ OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
+ OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
+ >;
+ };
+
+ hsusbb1_pins: hsusbb1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+ OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+ OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+ OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+ OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+ OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+ OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+ OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+ OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+ OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+ OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+ OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ i2c4_pins: i2c4-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+ >;
+ };
+
+ /*
+ * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
+ * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
+ */
+ wl12xx_gpio: wl12xx-gpio-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */
+ OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */
+ OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */
+ OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */
+ >;
+ };
+
+ /* wl12xx GPIO inputs and SDIO pins */
+ wl12xx_pins: wl12xx-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
+ OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
+ OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
+ OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
+ OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
+ OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
+ >;
+ };
+
+ button_pins: button-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_121 */
+ >;
+ };
+};
+
+&omap4_pmx_wkup {
+ led_wkgpio_pins: leds-wkpins-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
+ OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
+ >;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <400000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ /* IRQ# = 7 */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+ };
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ #clock-cells = <0>;
+ reg = <0x4b>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&twl6040_pins>;
+
+ /* IRQ# = 119 */
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+ ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+ };
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <100000>;
+
+ /*
+ * Display monitor features are burnt in their EEPROM as EDID data.
+ * The EEPROM is connected as I2C slave device.
+ */
+ eeprom@50 {
+ compatible = "ti,eeprom";
+ reg = <0x50>;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_pins>;
+ vmmc-supply = <&wl12xx_vmmc>;
+ interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core 0x10e>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ /* gpio_53 with gpmc_ncs3 pad as wakeup */
+ interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>,
+ <&omap4_pmx_core 0x3a>;
+ interrupt-names = "irq", "wakeup";
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&emif1 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&mcbsp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+ status = "okay";
+};
+
+&twl_usb_comparator {
+ usb-supply = <&vusb>;
+};
+
+&uart2 {
+ interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART2_RX>;
+};
+
+&uart3 {
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART3_RX>;
+};
+
+&uart4 {
+ interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART4_RX>;
+};
+
+&usb_otg_hs {
+ interface-type = <1>;
+ mode = <3>;
+ power = <50>;
+};
+
+&usbhshost {
+ port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub@1 {
+ compatible = "usb424,9514";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet: ethernet@1 {
+ compatible = "usb424,ec00";
+ reg = <1>;
+ };
+ };
+};
+
+&dss {
+ status = "okay";
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&dsi2 {
+ status = "okay";
+ vdd-supply = <&vcxio>;
+};
+
+&hdmi {
+ status = "okay";
+ vdda-supply = <&vdac>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
+
+&dsp {
+ status = "okay";
+ memory-region = <&dsp_memory_region>;
+ ti,timers = <&timer5>;
+ ti,watchdog-timers = <&timer6>;
+};
+
+&ipu {
+ status = "okay";
+ memory-region = <&ipu_memory_region>;
+ ti,timers = <&timer3>;
+ ti,watchdog-timers = <&timer9>, <&timer11>;
+};
diff --git a/src/arm/ti/omap/omap4-panda-es.dts b/src/arm/ti/omap/omap4-panda-es.dts
new file mode 100644
index 0000000..fe7b156
--- /dev/null
+++ b/src/arm/ti/omap/omap4-panda-es.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap4460.dtsi"
+#include "omap4-panda-common.dtsi"
+
+/ {
+ model = "TI OMAP4 PandaBoard-ES";
+ compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4";
+};
+
+/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
+&sound {
+ ti,model = "PandaBoardES";
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Ext Spk", "HFL",
+ "Ext Spk", "HFR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "AFML", "Line In",
+ "AFMR", "Line In";
+};
+
+/* PandaboardES has external pullups on SCL & SDA */
+&dss_hdmi_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ >;
+};
+
+&omap4_pmx_core {
+ led_gpio_pins: gpio-led-pmx-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3) /* gpio_110 */
+ >;
+ };
+
+ button_pins: button-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
+ >;
+ };
+
+ bt_pins: bt-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 - BTEN */
+ OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 - BTWAKEUP */
+ >;
+ };
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts - HCI */
+ OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
+ OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ >;
+ };
+};
+
+&led_wkgpio_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
+ >;
+};
+
+&leds {
+ pinctrl-0 = <
+ &led_gpio_pins
+ &led_wkgpio_pins
+ >;
+
+ led-heartbeat {
+ gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+ };
+ led-mmc {
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&gpio_keys {
+ buttonS2 {
+ gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* gpio_113 */
+ };
+};
+
+&gpio1_target {
+ ti,no-reset-on-init;
+};
+
+&wl12xx_gpio {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */
+ OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */
+ >;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins &bt_pins>;
+ bluetooth: tiwi {
+ compatible = "ti,wl1271-st";
+ enable-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; /* GPIO_46 */
+ };
+};
diff --git a/src/arm/ti/omap/omap4-panda.dts b/src/arm/ti/omap/omap4-panda.dts
new file mode 100644
index 0000000..529d5bc
--- /dev/null
+++ b/src/arm/ti/omap/omap4-panda.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+#include "omap4-panda-common.dtsi"
+
+/ {
+ model = "TI OMAP4 PandaBoard";
+ compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+};
diff --git a/src/arm/ti/omap/omap4-sdp-es23plus.dts b/src/arm/ti/omap/omap4-sdp-es23plus.dts
new file mode 100644
index 0000000..869f627
--- /dev/null
+++ b/src/arm/ti/omap/omap4-sdp-es23plus.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include "omap4-sdp.dts"
+
+/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
+&dss_hdmi_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ >;
+};
diff --git a/src/arm/ti/omap/omap4-sdp.dts b/src/arm/ti/omap/omap4-sdp.dts
new file mode 100644
index 0000000..b2cb93e
--- /dev/null
+++ b/src/arm/ti/omap/omap4-sdp.dts
@@ -0,0 +1,717 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+#include "elpida_ecb240abacn.dtsi"
+#include "omap4-mcpdm.dtsi"
+
+/ {
+ model = "TI OMAP4 SDP board";
+ compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ aliases {
+ display0 = &lcd0;
+ display1 = &lcd1;
+ display2 = &hdmi0;
+ };
+
+ vdd_eth: fixedregulator-vdd-eth {
+ pinctrl-names = "default";
+ pinctrl-0 = <&enet_enable_gpio>;
+
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_ETH";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */
+ enable-active-high;
+ regulator-boot-on;
+ startup-delay-us = <25000>;
+ };
+
+ vbat: fixedregulator-vbat {
+ compatible = "regulator-fixed";
+ regulator-name = "VBAT";
+ regulator-min-microvolt = <3750000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-boot-on;
+ };
+
+ led-controller-1 {
+ compatible = "gpio-leds";
+
+ led-1 {
+ label = "omap4:green:debug0";
+ gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
+ };
+
+ led-2 {
+ label = "omap4:green:debug1";
+ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
+ };
+
+ led-3 {
+ label = "omap4:green:debug2";
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
+ };
+
+ led-4 {
+ label = "omap4:green:debug3";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
+ };
+
+ led-5 {
+ label = "omap4:green:debug4";
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
+ };
+
+ led-6 {
+ label = "omap4:blue:user";
+ gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
+ };
+
+ led-7 {
+ label = "omap4:red:user";
+ gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
+ };
+
+ led-8 {
+ label = "omap4:green:user";
+ gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
+ };
+ };
+
+ led-controller-2 {
+ compatible = "pwm-leds";
+
+ led-9 {
+ label = "omap4::keypad";
+ pwms = <&twl_pwm 0 7812500>;
+ max-brightness = <127>;
+ };
+
+ led-10 {
+ label = "omap4:green:chrg";
+ pwms = <&twl_pwmled 0 7812500>;
+ max-brightness = <255>;
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&twl_pwm 1 7812500>;
+ brightness-levels = <
+ 0 10 20 30 40
+ 50 60 70 80 90
+ 100 110 120 127
+ >;
+ default-brightness-level = <13>;
+ };
+
+ sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "SDP4430";
+
+ ti,jack-detection = <1>;
+ ti,mclk-freq = <38400000>;
+
+ ti,mcpdm = <&mcpdm>;
+ ti,dmic = <&dmic>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Earphone Spk", "EP",
+ "Ext Spk", "HFL",
+ "Ext Spk", "HFR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "Vibrator", "VIBRAL",
+ "Vibrator", "VIBRAR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias",
+ "MAINMIC", "Main Handset Mic",
+ "Main Handset Mic", "Main Mic Bias",
+ "SUBMIC", "Sub Handset Mic",
+ "Sub Handset Mic", "Main Mic Bias",
+ "AFML", "Line In",
+ "AFMR", "Line In",
+ "DMic", "Digital Mic",
+ "Digital Mic", "Digital Mic1 Bias";
+ };
+
+ /* regulator for wl12xx on sdio5 */
+ wl12xx_vmmc: wl12xx_vmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_gpio>;
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ tpd12s015: encoder {
+ compatible = "ti,tpd12s015";
+
+ gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
+ <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
+ <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ hdmi0: connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "c";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+};
+
+&omap4_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_hdmi_pins
+ &tpd12s015_pins
+ >;
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
+ OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
+ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
+ OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ uart4_pins: uart4-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
+ OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
+ >;
+ };
+
+ twl6040_pins: twl6040-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
+ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
+ >;
+ };
+
+ dmic_pins: dmic-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
+ OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
+ OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
+ OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
+ >;
+ };
+
+ mcbsp1_pins: mcbsp1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+ OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
+ OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
+ OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+ >;
+ };
+
+ mcbsp2_pins: mcbsp2-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
+ OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
+ OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
+ OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
+ >;
+ };
+
+ mcspi1_pins: mcspi1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
+ OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+ OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
+ OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
+ >;
+ };
+
+ dss_hdmi_pins: dss-hdmi-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ >;
+ };
+
+ tpd12s015_pins: tpd12s015-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
+ OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
+ OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ i2c4_pins: i2c4-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+ >;
+ };
+
+ /* wl12xx GPIO output for WLAN_EN */
+ wl12xx_gpio: wl12xx-gpio-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */
+ >;
+ };
+
+ /* wl12xx GPIO inputs and SDIO pins */
+ wl12xx_pins: wl12xx-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
+ OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
+ OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
+ OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
+ OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
+ OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
+ >;
+ };
+
+ /* gpio_48 for ENET_ENABLE */
+ enet_enable_gpio: enet-enable-gpio-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* gpmc_a24.gpio_48 */
+ >;
+ };
+
+ ks8851_pins: ks8851-pins {
+ pinctrl-single,pins = <
+ /* ENET_INT */
+ OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.gpio_34 */
+ /*
+ * Misterious pin which makes the ethernet working
+ * The legacy board file requested this pin on boot
+ * (ETH_KS8851_QUART) and set it to high, similarly to
+ * the ENET_ENABLE pin.
+ * We could use gpio-hog to keep it high, but let's use
+ * it as a reset GPIO for ks8851.
+ */
+ OMAP4_IOPAD(0x13a, PIN_OUTPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.gpio_138 */
+ >;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <400000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+ };
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ #clock-cells = <0>;
+ reg = <0x4b>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&twl6040_pins>;
+
+ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+ ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+
+ /* regulators for vibra motor */
+ vddvibl-supply = <&vbat>;
+ vddvibr-supply = <&vbat>;
+
+ vibra {
+ /* Vibra driver, motor resistance parameters */
+ ti,vibldrv-res = <8>;
+ ti,vibrdrv-res = <3>;
+ ti,viblmotor-res = <10>;
+ ti,vibrmotor-res = <10>;
+ };
+ };
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <400000>;
+
+ /*
+ * Temperature Sensor
+ * https://www.ti.com/lit/ds/symlink/tmp105.pdf
+ */
+ tmp105@48 {
+ compatible = "ti,tmp105";
+ reg = <0x48>;
+ };
+
+ /*
+ * Ambient Light Sensor
+ * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
+ */
+ bh1780@29 {
+ compatible = "rohm,bh1780";
+ reg = <0x29>;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+
+ clock-frequency = <400000>;
+
+ /*
+ * 3-Axis Digital Compass
+ * https://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
+ */
+ hmc5843@1e {
+ compatible = "honeywell,hmc5843";
+ reg = <0x1e>;
+ };
+};
+
+&mcspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi1_pins>;
+
+ eth@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ks8851_pins>;
+
+ compatible = "ks8851";
+ spi-max-frequency = <24000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
+ vdd-supply = <&vdd_eth>;
+ reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vaux1>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_pins>;
+ vmmc-supply = <&wl12xx_vmmc>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1281";
+ reg = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
+ ref-clock-frequency = <26000000>;
+ tcxo-clock-frequency = <26000000>;
+ };
+};
+
+&emif1 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <0x00000012 /* KEY_E */
+ 0x00010013 /* KEY_R */
+ 0x00020014 /* KEY_T */
+ 0x00030066 /* KEY_HOME */
+ 0x0004003f /* KEY_F5 */
+ 0x000500f0 /* KEY_UNKNOWN */
+ 0x00060017 /* KEY_I */
+ 0x0007002a /* KEY_LEFTSHIFT */
+ 0x01000020 /* KEY_D*/
+ 0x01010021 /* KEY_F */
+ 0x01020022 /* KEY_G */
+ 0x010300e7 /* KEY_SEND */
+ 0x01040040 /* KEY_F6 */
+ 0x010500f0 /* KEY_UNKNOWN */
+ 0x01060025 /* KEY_K */
+ 0x0107001c /* KEY_ENTER */
+ 0x0200002d /* KEY_X */
+ 0x0201002e /* KEY_C */
+ 0x0202002f /* KEY_V */
+ 0x0203006b /* KEY_END */
+ 0x02040041 /* KEY_F7 */
+ 0x020500f0 /* KEY_UNKNOWN */
+ 0x02060034 /* KEY_DOT */
+ 0x0207003a /* KEY_CAPSLOCK */
+ 0x0300002c /* KEY_Z */
+ 0x0301004e /* KEY_KPLUS */
+ 0x03020030 /* KEY_B */
+ 0x0303003b /* KEY_F1 */
+ 0x03040042 /* KEY_F8 */
+ 0x030500f0 /* KEY_UNKNOWN */
+ 0x03060018 /* KEY_O */
+ 0x03070039 /* KEY_SPACE */
+ 0x04000011 /* KEY_W */
+ 0x04010015 /* KEY_Y */
+ 0x04020016 /* KEY_U */
+ 0x0403003c /* KEY_F2 */
+ 0x04040073 /* KEY_VOLUMEUP */
+ 0x040500f0 /* KEY_UNKNOWN */
+ 0x04060026 /* KEY_L */
+ 0x04070069 /* KEY_LEFT */
+ 0x0500001f /* KEY_S */
+ 0x05010023 /* KEY_H */
+ 0x05020024 /* KEY_J */
+ 0x0503003d /* KEY_F3 */
+ 0x05040043 /* KEY_F9 */
+ 0x05050072 /* KEY_VOLUMEDOWN */
+ 0x05060032 /* KEY_M */
+ 0x0507006a /* KEY_RIGHT */
+ 0x06000010 /* KEY_Q */
+ 0x0601001e /* KEY_A */
+ 0x06020031 /* KEY_N */
+ 0x0603009e /* KEY_BACK */
+ 0x0604000e /* KEY_BACKSPACE */
+ 0x060500f0 /* KEY_UNKNOWN */
+ 0x06060019 /* KEY_P */
+ 0x06070067 /* KEY_UP */
+ 0x07000094 /* KEY_PROG1 */
+ 0x07010095 /* KEY_PROG2 */
+ 0x070200ca /* KEY_PROG3 */
+ 0x070300cb /* KEY_PROG4 */
+ 0x0704003e /* KEY_F4 */
+ 0x070500f0 /* KEY_UNKNOWN */
+ 0x07060160 /* KEY_OK */
+ 0x0707006c>; /* KEY_DOWN */
+ linux,input-no-autorepeat;
+};
+
+&uart2 {
+ interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART2_RX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART3_RX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+ interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART4_RX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+};
+
+&mcbsp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+ status = "okay";
+};
+
+&mcbsp2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+ status = "okay";
+};
+
+&dmic {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dmic_pins>;
+ status = "okay";
+};
+
+&twl_usb_comparator {
+ usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+ interface-type = <1>;
+ mode = <3>;
+ power = <50>;
+};
+
+&dss {
+ status = "okay";
+};
+
+&dsi1 {
+ status = "okay";
+ vdd-supply = <&vcxio>;
+
+ port {
+ dsi1_out_ep: endpoint {
+ remote-endpoint = <&lcd0_in>;
+ lanes = <0 1 2 3 4 5>;
+ };
+ };
+
+ lcd0: panel@0 {
+ compatible = "tpo,taal", "panel-dsi-cm";
+ reg = <0>;
+ label = "lcd0";
+
+ reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
+
+ port {
+ lcd0_in: endpoint {
+ remote-endpoint = <&dsi1_out_ep>;
+ };
+ };
+ };
+};
+
+&dsi2 {
+ status = "okay";
+ vdd-supply = <&vcxio>;
+
+ port {
+ dsi2_out_ep: endpoint {
+ remote-endpoint = <&lcd1_in>;
+ lanes = <0 1 2 3 4 5>;
+ };
+ };
+
+ lcd1: panel@0 {
+ compatible = "tpo,taal", "panel-dsi-cm";
+ reg = <0>;
+ label = "lcd1";
+
+ reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+
+ port {
+ lcd1_in: endpoint {
+ remote-endpoint = <&dsi2_out_ep>;
+ };
+ };
+ };
+};
+
+&hdmi {
+ status = "okay";
+ vdda-supply = <&vdac>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap4-var-dvk-om44.dts b/src/arm/ti/omap/omap4-var-dvk-om44.dts
new file mode 100644
index 0000000..84fd17f
--- /dev/null
+++ b/src/arm/ti/omap/omap4-var-dvk-om44.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ */
+/dts-v1/;
+
+#include "omap4-var-som-om44.dtsi"
+#include "omap4-var-som-om44-wlan.dtsi"
+#include "omap4-var-om44customboard.dtsi"
+
+/ {
+ model = "Variscite VAR-DVK-OM44";
+ compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+
+ aliases {
+ display0 = &lcd0;
+ display1 = &hdmi0;
+ };
+
+ lcd0: display {
+ compatible = "innolux,at070tn83", "panel-dpi";
+ label = "lcd";
+ panel-timing {
+ clock-frequency = <33333333>;
+
+ hback-porch = <40>;
+ hactive = <800>;
+ hfront-porch = <40>;
+ hsync-len = <48>;
+
+ vback-porch = <29>;
+ vactive = <480>;
+ vfront-porch = <13>;
+ vsync-len = <3>;
+ };
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
+ backlight {
+ compatible = "gpio-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+
+ gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio 122 */
+ };
+};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&dsi2 {
+ status = "okay";
+ vdd-supply = <&vcxio>;
+};
diff --git a/src/arm/ti/omap/omap4-var-om44customboard.dtsi b/src/arm/ti/omap/omap4-var-om44customboard.dtsi
new file mode 100644
index 0000000..cadc7e0
--- /dev/null
+++ b/src/arm/ti/omap/omap4-var-om44customboard.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ display0 = &hdmi0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_led_pins>;
+
+ led0 {
+ label = "var:green:led0";
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio 173 */
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1 {
+ label = "var:green:led1";
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; /* gpio 172 */
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_key_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-key@184 {
+ label = "user";
+ gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */
+ linux,code = <BTN_EXTRA>;
+ wakeup-source;
+ };
+ };
+
+ hdmi0: connector {
+ compatible = "hdmi-connector";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_pins>;
+ label = "hdmi";
+ type = "a";
+
+ hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+ };
+};
+
+&omap4_pmx_core {
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi1_cs2.uart1_cts */
+ OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1) /* mcspi1_cs3.uart1_rts */
+ OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE1) /* i2c2_scl.uart1_rx */
+ OMAP4_IOPAD(0x128, PIN_OUTPUT | MUX_MODE1) /* i2c2_sda.uart1_tx */
+ >;
+ };
+
+ mcspi1_pins: mcspi1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
+ OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+ OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
+ OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
+ >;
+ };
+
+ mcasp_pins: mcsasp-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2) /* mcbsp2_dr.abe_mcasp_axr */
+ >;
+ };
+
+ dss_dpi_pins: dss-dpi-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */
+ OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */
+ OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */
+ OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */
+ OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */
+ OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */
+ OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */
+ OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */
+ OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */
+ OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */
+ OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */
+ OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */
+ OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */
+ OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */
+ OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */
+ OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */
+ OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */
+ OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */
+ OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5) /* dispc2_de */
+ OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */
+ OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */
+ OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */
+ OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */
+ OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */
+ OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */
+ OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */
+ OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */
+ OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */
+ >;
+ };
+
+ dss_hdmi_pins: dss-hdmi-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ >;
+ };
+
+ i2c4_pins: i2c4-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+ >;
+ };
+
+ mmc5_pins: mmc5-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3) /* abe_mcbsp2_clkx.gpio_110 */
+ OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
+ OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
+ OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
+ OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
+ OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
+ >;
+ };
+
+ gpio_led_pins: gpio-led-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3) /* kpd_col4.gpio_172 */
+ OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) /* kpd_col5.gpio_173 */
+ >;
+ };
+
+ gpio_key_pins: gpio-key-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3) /* sys_boot0.gpio_184 */
+ >;
+ };
+
+ ks8851_irq_pins: ks8851-irq-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3) /* kpd_col3.gpio_171 */
+ >;
+ };
+
+ hdmi_hpd_pins: hdmi-hpd-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
+ >;
+ };
+
+ backlight_pins: backlight-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */
+ >;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+};
+
+&mcspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi1_pins>;
+ status = "okay";
+
+ eth@0 {
+ compatible = "ks8851";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ks8851_irq_pins>;
+ spi-max-frequency = <24000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio 171 */
+ };
+};
+
+&mmc5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc5_pins>;
+ vmmc-supply = <&vbat>;
+ bus-width = <4>;
+ cd-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio 110 */
+ status = "okay";
+};
+
+&dss {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_hdmi_pins>;
+ vdda-supply = <&vdac>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap4-var-som-om44-wlan.dtsi b/src/arm/ti/omap/omap4-var-som-om44-wlan.dtsi
new file mode 100644
index 0000000..de779d2
--- /dev/null
+++ b/src/arm/ti/omap/omap4-var-som-om44-wlan.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ */
+
+/ {
+ /* regulator for wl12xx on sdio4 */
+ wl12xx_vmmc: wl12xx_vmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_ctrl_pins>;
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* gpio 43 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+};
+
+&omap4_pmx_core {
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
+ OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ >;
+ };
+
+ wl12xx_ctrl_pins: wl12xx-ctrl-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a17.gpio_41 (WLAN_IRQ) */
+ OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3) /* gpmc_a18.gpio_42 (BT_EN) */
+ OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 (WLAN_EN) */
+ >;
+ };
+
+ mmc4_pins: mmc4-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_clk.sdmmc4_clk */
+ OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_simo.sdmmc4_cmd */
+ OMAP4_IOPAD(0x158, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_somi.sdmmc4_dat0 */
+ OMAP4_IOPAD(0x15e, PIN_INPUT_PULLUP | MUX_MODE1) /* uart4_tx.sdmmc4_dat1 */
+ OMAP4_IOPAD(0x15c, PIN_INPUT_PULLUP | MUX_MODE1) /* uart4_rx.sdmmc4_dat2 */
+ OMAP4_IOPAD(0x15a, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_cs0.sdmmc4_dat3 */
+ >;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&mmc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc4_pins>;
+ vmmc-supply = <&wl12xx_vmmc>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */
+ ref-clock-frequency = <38400000>;
+ };
+};
diff --git a/src/arm/ti/omap/omap4-var-som-om44.dtsi b/src/arm/ti/omap/omap4-var-som-om44.dtsi
new file mode 100644
index 0000000..37d56b3
--- /dev/null
+++ b/src/arm/ti/omap/omap4-var-som-om44.dtsi
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ * Copyright (C) 2012 Variscite Ltd. - https://www.variscite.com
+ */
+#include "omap4460.dtsi"
+#include "omap4-mcpdm.dtsi"
+
+/ {
+ model = "Variscite VAR-SOM-OM44";
+ compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ sound: sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "VAR-SOM-OM44";
+
+ ti,mclk-freq = <38400000>;
+ ti,mcpdm = <&mcpdm>;
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "AFML", "Line In",
+ "AFMR", "Line In";
+ };
+
+ /* HS USB Host PHY on PORT 1 */
+ hsusb1_phy: hsusb1_phy {
+ compatible = "usb-nop-xceiv";
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusbb1_phy_clk_pins
+ &hsusbb1_phy_rst_pins
+ >;
+
+ reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */
+ vcc-supply = <&vbat>;
+ #phy-cells = <0>;
+
+ clocks = <&auxclk3_ck>;
+ clock-names = "main_clk";
+ clock-frequency = <19200000>;
+ };
+
+ vbat: fixedregulator-vbat {
+ compatible = "regulator-fixed";
+ regulator-name = "VBAT";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&omap4_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusbb1_pins
+ >;
+
+ twl6040_pins: twl6040-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x19c, PIN_OUTPUT | MUX_MODE3) /* fref_clk2_out.gpio_182 */
+ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
+ >;
+ };
+
+ tsc2004_pins: tsc2004-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3) /* gpmc_ncs4.gpio_101 (irq) */
+ OMAP4_IOPAD(0x092, PIN_OUTPUT | MUX_MODE3) /* gpmc_ncs5.gpio_102 (rst) */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
+ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
+ OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ hsusbb1_pins: hsusbb1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+ OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+ OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+ OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+ OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+ OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+ OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+ OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+ OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+ OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+ OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+ OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+ >;
+ };
+
+ hsusbb1_phy_rst_pins: hsusbb1-phy-rst-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x18c, PIN_OUTPUT | MUX_MODE3) /* kpd_row2.gpio_177 */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+};
+
+&omap4_pmx_wkup {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusbb1_hub_rst_pins
+ &lan7500_rst_pins
+ >;
+
+ hsusbb1_phy_clk_pins: hsusbb1-phy-clk-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x058, PIN_OUTPUT | MUX_MODE0) /* fref_clk3_out */
+ >;
+ };
+
+ hsusbb1_hub_rst_pins: hsusbb1-hub-rst-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x042, PIN_OUTPUT | MUX_MODE3) /* gpio_wk1 */
+ >;
+ };
+
+ lan7500_rst_pins: lan7500-rst-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x040, PIN_OUTPUT | MUX_MODE3) /* gpio_wk0 */
+ >;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+ };
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ #clock-cells = <0>;
+ reg = <0x4b>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&twl6040_pins>;
+
+ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+ ti,audpwron-gpio = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio 182 */
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+ };
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&vusim {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ touchscreen: tsc2004@48 {
+ compatible = "ti,tsc2004";
+ reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsc2004_pins>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* gpio 101 */
+ status = "disabled";
+ };
+
+ tmp105@49 {
+ compatible = "ti,tmp105";
+ reg = <0x49>;
+ };
+
+ eeprom@50 {
+ compatible = "microchip,24c32", "atmel,24c32";
+ reg = <0x50>;
+ };
+};
+
+&i2c4 {
+ status = "disabled";
+};
+
+&gpmc {
+ status = "disabled";
+};
+
+&mcspi1 {
+ status = "disabled";
+};
+
+&mcspi2 {
+ status = "disabled";
+};
+
+&mcspi3 {
+ status = "disabled";
+};
+
+&mcspi4 {
+ status = "disabled";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc>;
+ bus-width = <4>;
+ ti,non-removable;
+ status = "okay";
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ status = "disabled";
+};
+
+&uart1 {
+ status = "disabled";
+};
+
+&uart2 {
+ status = "disabled";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "okay";
+};
+
+&uart4 {
+ status = "disabled";
+};
+
+&keypad {
+ status = "disabled";
+};
+
+&twl_usb_comparator {
+ usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+ interface-type = <1>;
+ mode = <3>;
+ power = <50>;
+};
+
+&usbhshost {
+ port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy>;
+};
diff --git a/src/arm/ti/omap/omap4-var-stk-om44.dts b/src/arm/ti/omap/omap4-var-stk-om44.dts
new file mode 100644
index 0000000..656fb29
--- /dev/null
+++ b/src/arm/ti/omap/omap4-var-stk-om44.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ */
+/dts-v1/;
+
+#include "omap4-var-som-om44.dtsi"
+#include "omap4-var-som-om44-wlan.dtsi"
+#include "omap4-var-om44customboard.dtsi"
+
+/ {
+ model = "Variscite VAR-STK-OM44";
+ compatible = "variscite,var-stk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+};
diff --git a/src/arm/ti/omap/omap4.dtsi b/src/arm/ti/omap/omap4.dtsi
new file mode 100644
index 0000000..2bbff90
--- /dev/null
+++ b/src/arm/ti/omap/omap4.dtsi
@@ -0,0 +1,868 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/omap4.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/omap.h>
+#include <dt-bindings/clock/omap4.h>
+
+/ {
+ compatible = "ti,omap4430", "ti,omap4";
+ interrupt-parent = <&wakeupgen>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+
+ aliases {
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ i2c3 = &i2c4;
+ mmc0 = &mmc1;
+ mmc1 = &mmc2;
+ mmc2 = &mmc3;
+ mmc3 = &mmc4;
+ mmc4 = &mmc5;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ rproc0 = &dsp;
+ rproc1 = &ipu;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ next-level-cache = <&L2>;
+ reg = <0x0>;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+ };
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ next-level-cache = <&L2>;
+ reg = <0x1>;
+ };
+ };
+
+ /*
+ * Needed early by omap4_sram_init() for barrier, do not move to l3
+ * interconnect as simple-pm-bus probes at module_init() time.
+ */
+ ocmcram: sram@40304000 {
+ compatible = "mmio-sram";
+ reg = <0x40304000 0xa000>; /* 40k */
+ };
+
+ gic: interrupt-controller@48241000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48241000 0x1000>,
+ <0x48240100 0x0100>;
+ interrupt-parent = <&gic>;
+ };
+
+ L2: cache-controller@48242000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x48242000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ local-timer@48240600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ clocks = <&mpu_periphclk>;
+ reg = <0x48240600 0x20>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>;
+ interrupt-parent = <&gic>;
+ };
+
+ wakeupgen: interrupt-controller@48281000 {
+ compatible = "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48281000 0x1000>;
+ interrupt-parent = <&gic>;
+ };
+
+ /*
+ * XXX: Use a flat representation of the OMAP4 interconnect.
+ * The real OMAP interconnect network is quite complex.
+ * Since it will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp {
+ compatible = "simple-pm-bus";
+ power-domains = <&prm_l4per>;
+ clocks = <&l3_1_clkctrl OMAP4_L3_MAIN_1_CLKCTRL 0>,
+ <&l3_2_clkctrl OMAP4_L3_MAIN_2_CLKCTRL 0>,
+ <&l3_instr_clkctrl OMAP4_L3_MAIN_3_CLKCTRL 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ l3-noc@44000000 {
+ compatible = "ti,omap4-l3-noc";
+ reg = <0x44000000 0x1000>,
+ <0x44800000 0x2000>,
+ <0x45000000 0x1000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ l4_wkup: interconnect@4a300000 {
+ };
+
+ l4_cfg: interconnect@4a000000 {
+ };
+
+ l4_per: interconnect@48000000 {
+ };
+
+ target-module@48210000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ power-domains = <&prm_mpu>;
+ clocks = <&mpuss_clkctrl OMAP4_MPU_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48210000 0x1f0000>;
+
+ mpu {
+ compatible = "ti,omap4-mpu";
+ sram = <&ocmcram>;
+ };
+ };
+
+ l4_abe: interconnect@40100000 {
+ };
+
+ target-module@50000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x50000000 4>,
+ <0x50000010 4>,
+ <0x50000014 4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ ti,no-idle-on-init;
+ clocks = <&l3_2_clkctrl OMAP4_GPMC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
+ <0x00000000 0x00000000 0x40000000>; /* data */
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,omap4430-gpmc";
+ reg = <0x50000000 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 4>;
+ dma-names = "rxtx";
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ clocks = <&l3_div_ck>;
+ clock-names = "fck";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ target-module@52000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x52000000 0x4>,
+ <0x52000010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-delay-us = <2>;
+ power-domains = <&prm_cam>;
+ clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x52000000 0x1000000>;
+
+ /* No child device binding, driver in staging */
+ };
+
+ /*
+ * Note that 4430 needs cross trigger interface (CTI) supported
+ * before we can configure the interrupts. This means sampling
+ * events are not supported for pmu. Note that 4460 does not use
+ * CTI, see also 4460.dtsi.
+ */
+ target-module@54000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ power-domains = <&prm_emu>;
+ clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x54000000 0x1000000>;
+
+ pmu: pmu {
+ compatible = "arm,cortex-a9-pmu";
+ };
+ };
+
+ target-module@55082000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55082000 0x4>,
+ <0x55082010 0x4>,
+ <0x55082014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_core 2>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x55082000 0x100>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu_ipu: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
+ };
+
+ target-module@4012c000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x4012c000 0x4>,
+ <0x4012c010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ clocks = <&abe_clkctrl OMAP4_SLIMBUS1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */
+ <0x4902c000 0x4902c000 0x1000>; /* L3 */
+
+ /* No child device binding or driver in mainline */
+ };
+
+ target-module@4e000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4e000000 0x4>,
+ <0x4e000010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ranges = <0x0 0x4e000000 0x2000000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ dmm@0 {
+ compatible = "ti,omap4-dmm";
+ reg = <0 0x800>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@4c000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x4c000000 0x4>;
+ reg-names = "rev";
+ clocks = <&l3_emif_clkctrl OMAP4_EMIF1_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4c000000 0x1000000>;
+
+ emif1: emif@0 {
+ compatible = "ti,emif-4d";
+ reg = <0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
+ };
+
+ target-module@4d000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x4d000000 0x4>;
+ reg-names = "rev";
+ clocks = <&l3_emif_clkctrl OMAP4_EMIF2_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4d000000 0x1000000>;
+
+ emif2: emif@0 {
+ compatible = "ti,emif-4d";
+ reg = <0 0x100>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
+ };
+
+ dsp: dsp {
+ compatible = "ti,omap4-dsp";
+ ti,bootreg = <&scm_conf 0x304 0>;
+ iommus = <&mmu_dsp>;
+ resets = <&prm_tesla 0>;
+ clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
+ firmware-name = "omap4-dsp-fw.xe64T";
+ mboxes = <&mailbox &mbox_dsp>;
+ status = "disabled";
+ };
+
+ ipu: ipu@55020000 {
+ compatible = "ti,omap4-ipu";
+ reg = <0x55020000 0x10000>;
+ reg-names = "l2ram";
+ iommus = <&mmu_ipu>;
+ resets = <&prm_core 0>, <&prm_core 1>;
+ clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>;
+ firmware-name = "omap4-ipu-fw.xem3";
+ mboxes = <&mailbox &mbox_ipu>;
+ status = "disabled";
+ };
+
+ aes1_target: target-module@4b501000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4b501080 0x4>,
+ <0x4b501084 0x4>,
+ <0x4b501088 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+ clocks = <&l4_secure_clkctrl OMAP4_AES1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b501000 0x1000>;
+
+ aes1: aes@0 {
+ compatible = "ti,omap4-aes";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 111>, <&sdma 110>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ aes2_target: target-module@4b701000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4b701080 0x4>,
+ <0x4b701084 0x4>,
+ <0x4b701088 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+ clocks = <&l4_secure_clkctrl OMAP4_AES2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b701000 0x1000>;
+
+ aes2: aes@0 {
+ compatible = "ti,omap4-aes";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 114>, <&sdma 113>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ sham_target: target-module@4b100000 {
+ compatible = "ti,sysc-omap3-sham", "ti,sysc";
+ reg = <0x4b100100 0x4>,
+ <0x4b100110 0x4>,
+ <0x4b100114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+ clocks = <&l4_secure_clkctrl OMAP4_SHA2MD5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b100000 0x1000>;
+
+ sham: sham@0 {
+ compatible = "ti,omap4-sham";
+ reg = <0 0x300>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 119>;
+ dma-names = "rx";
+ };
+ };
+
+ abb_mpu: regulator-abb-mpu {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_mpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ ti,tranxdone-status-mask = <0x80>;
+ clocks = <&sys_clkin_ck>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ status = "disabled";
+ };
+
+ abb_iva: regulator-abb-iva {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_iva";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ ti,tranxdone-status-mask = <0x80000000>;
+ clocks = <&sys_clkin_ck>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ status = "disabled";
+ };
+
+ sgx_module: target-module@56000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x5600fe00 0x4>,
+ <0x5600fe10 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ power-domains = <&prm_gfx>;
+ clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x56000000 0x2000000>;
+
+ /*
+ * Closed source PowerVR driver, no child device
+ * binding or driver in mainline
+ */
+ };
+
+ /*
+ * DSS is only using l3 mapping without l4 as noted in the TRM
+ * "10.1.3 DSS Register Manual" for omap4460.
+ */
+ target-module@58000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x58000000 4>,
+ <0x58000014 4>;
+ reg-names = "rev", "syss";
+ ti,syss-mask = <1>;
+ power-domains = <&prm_dss>;
+ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 0>,
+ <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
+ <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>,
+ <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
+ clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x58000000 0x1000000>;
+
+ dss: dss@0 {
+ compatible = "ti,omap4-dss";
+ reg = <0 0x80>;
+ status = "disabled";
+ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000000>;
+
+ target-module@1000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x1000 0x4>,
+ <0x1010 0x4>,
+ <0x1014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+ <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+ clock-names = "fck", "sys_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1000 0x1000>;
+
+ dispc@0 {
+ compatible = "ti,omap4-dispc";
+ reg = <0 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ };
+ };
+
+ target-module@2000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x2000 0x4>,
+ <0x2010 0x4>,
+ <0x2014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+ <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+ clock-names = "fck", "sys_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x1000>;
+
+ rfbi: encoder@0 {
+ reg = <0 0x1000>;
+ status = "disabled";
+ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>;
+ clock-names = "fck", "ick";
+ };
+ };
+
+ target-module@3000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x3000 0x4>;
+ reg-names = "rev";
+ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+ clock-names = "sys_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x3000 0x1000>;
+
+ venc: encoder@0 {
+ compatible = "ti,omap4-venc";
+ reg = <0 0x1000>;
+ status = "disabled";
+ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
+ clock-names = "fck";
+ };
+ };
+
+ target-module@4000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4000 0x4>,
+ <0x4010 0x4>,
+ <0x4014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4000 0x1000>;
+
+ dsi1: encoder@0 {
+ compatible = "ti,omap4-dsi";
+ reg = <0 0x200>,
+ <0x200 0x40>,
+ <0x300 0x20>;
+ reg-names = "proto", "phy", "pll";
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+ <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+ clock-names = "fck", "sys_clk";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ target-module@5000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x5000 0x4>,
+ <0x5010 0x4>,
+ <0x5014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5000 0x1000>;
+
+ dsi2: encoder@0 {
+ compatible = "ti,omap4-dsi";
+ reg = <0 0x200>,
+ <0x200 0x40>,
+ <0x300 0x20>;
+ reg-names = "proto", "phy", "pll";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+ <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+ clock-names = "fck", "sys_clk";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ target-module@6000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x6000 0x4>,
+ <0x6010 0x4>;
+ reg-names = "rev", "sysc";
+ /*
+ * Has SYSC_IDLE_SMART and SYSC_IDLE_SMART_WKUP
+ * but HDMI audio will fail with them.
+ */
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
+ <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck", "dss_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x6000 0x2000>;
+
+ hdmi: encoder@0 {
+ compatible = "ti,omap4-hdmi";
+ reg = <0 0x200>,
+ <0x200 0x100>,
+ <0x300 0x100>,
+ <0x400 0x1000>;
+ reg-names = "wp", "pll", "phy", "core";
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
+ <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+ clock-names = "fck", "sys_clk";
+ dmas = <&sdma 76>;
+ dma-names = "audio_tx";
+ };
+ };
+ };
+ };
+
+ iva_hd_target: target-module@5a000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x5a05a400 0x4>,
+ <0x5a05a410 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ power-domains = <&prm_ivahd>;
+ resets = <&prm_ivahd 2>;
+ reset-names = "rstctrl";
+ clocks = <&ivahd_clkctrl OMAP4_IVA_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5a000000 0x5a000000 0x1000000>,
+ <0x5b000000 0x5b000000 0x1000000>;
+
+ iva {
+ compatible = "ti,ivahd";
+ };
+ };
+ };
+};
+
+#include "omap4-l4.dtsi"
+#include "omap4-l4-abe.dtsi"
+#include "omap44xx-clocks.dtsi"
+
+&prm {
+ prm_mpu: prm@300 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x300 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_tesla: prm@400 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x400 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_abe: prm@500 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x500 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_always_on_core: prm@600 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x600 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_core: prm@700 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x700 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_ivahd: prm@f00 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0xf00 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_cam: prm@1000 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1000 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_dss: prm@1100 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1100 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_gfx: prm@1200 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1200 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_l3init: prm@1300 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1300 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_l4per: prm@1400 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1400 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_cefuse: prm@1600 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1600 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_wkup: prm@1700 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1700 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_emu: prm@1900 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1900 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_dss: prm@1100 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1100 0x40>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_device: prm@1b00 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1b00 0x40>;
+ #reset-cells = <1>;
+ };
+};
+
+/* Preferred always-on timer for clockevent */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_32k_ck>;
+ };
+};
diff --git a/src/arm/ti/omap/omap443x-clocks.dtsi b/src/arm/ti/omap/omap443x-clocks.dtsi
new file mode 100644
index 0000000..581e088
--- /dev/null
+++ b/src/arm/ti/omap/omap443x-clocks.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&prm_clocks {
+ bandgap_fclk: bandgap_fclk@1888 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "bandgap_fclk";
+ clocks = <&sys_32k_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x1888>;
+ };
+};
diff --git a/src/arm/ti/omap/omap443x.dtsi b/src/arm/ti/omap/omap443x.dtsi
new file mode 100644
index 0000000..2104170
--- /dev/null
+++ b/src/arm/ti/omap/omap443x.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP443x SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "omap4.dtsi"
+
+/ {
+ cpus {
+ cpu0: cpu@0 {
+ /* OMAP443x variants OPP50-OPPNT */
+ operating-points = <
+ /* kHz uV */
+ 300000 1025000
+ 600000 1200000
+ 800000 1313000
+ 1008000 1375000
+ >;
+ clock-latency = <300000>; /* From legacy driver */
+
+ /* cooling options */
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ };
+
+ thermal-zones {
+ #include "omap4-cpu-thermal.dtsi"
+ };
+
+ ocp {
+ /* 4430 has only gpio_86 tshut and no talert interrupt */
+ bandgap: bandgap@4a002260 {
+ reg = <0x4a002260 0x4
+ 0x4a00232C 0x4>;
+ compatible = "ti,omap4430-bandgap";
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+
+ #thermal-sensor-cells = <0>;
+ };
+ };
+
+ ocp {
+ abb_mpu: regulator-abb-mpu {
+ status = "okay";
+
+ reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>;
+ reg-names = "base-address", "int-address";
+
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1025000 0 0 0 0 0
+ 1200000 0 0 0 0 0
+ 1313000 0 0 0 0 0
+ 1375000 1 0 0 0 0
+ 1389000 1 0 0 0 0
+ >;
+ };
+
+ /* Default unused, just provide register info for record */
+ abb_iva: regulator-abb-iva {
+ reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>;
+ reg-names = "base-address", "int-address";
+ };
+
+ };
+
+};
+
+&cpu_thermal {
+ thermal-sensors = <&bandgap>;
+ coefficients = <0 20000>;
+};
+
+/include/ "omap443x-clocks.dtsi"
+
+/*
+ * Use dpll_per for sgx at 307.2MHz like droid4 stock v3.0.8 Android kernel
+ */
+&sgx_module {
+ assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>,
+ <&dpll_per_m7x2_ck>;
+ assigned-clock-rates = <0>, <307200000>;
+ assigned-clock-parents = <&dpll_per_m7x2_ck>;
+};
diff --git a/src/arm/ti/omap/omap4460.dtsi b/src/arm/ti/omap/omap4460.dtsi
new file mode 100644
index 0000000..a676475
--- /dev/null
+++ b/src/arm/ti/omap/omap4460.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP4460 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include "omap4.dtsi"
+
+/ {
+ cpus {
+ /* OMAP446x 'standard device' variants OPP50 to OPPTurbo */
+ cpu0: cpu@0 {
+ operating-points = <
+ /* kHz uV */
+ 350000 1025000
+ 700000 1200000
+ 920000 1313000
+ >;
+ clock-latency = <300000>; /* From legacy driver */
+
+ /* cooling options */
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ };
+
+ thermal-zones {
+ #include "omap4-cpu-thermal.dtsi"
+ };
+
+ ocp {
+ bandgap: bandgap@4a002260 {
+ reg = <0x4a002260 0x4
+ 0x4a00232C 0x4
+ 0x4a002378 0x18>;
+ compatible = "ti,omap4460-bandgap";
+ interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* tshut */
+
+ #thermal-sensor-cells = <0>;
+ };
+
+ abb_mpu: regulator-abb-mpu {
+ status = "okay";
+
+ reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>,
+ <0x4A002268 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address";
+
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1025000 0 0 0 0 0
+ 1200000 0 0 0 0 0
+ 1313000 0 0 0x100000 0x40000 0
+ 1375000 1 0 0 0 0
+ 1389000 1 0 0 0 0
+ >;
+ };
+
+ abb_iva: regulator-abb-iva {
+ status = "okay";
+
+ reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>,
+ <0x4A002268 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address";
+
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 950000 0 0 0 0 0
+ 1140000 0 0 0 0 0
+ 1291000 0 0 0x200000 0 0
+ 1375000 1 0 0 0 0
+ 1376000 1 0 0 0 0
+ >;
+ };
+ };
+
+};
+
+&cpu_thermal {
+ thermal-sensors = <&bandgap>;
+ coefficients = <348 (-9301)>;
+};
+
+/* Only some L4 CFG interconnect ranges are different on 4460 */
+&l4_cfg_segment_300000 {
+ ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */
+ <0x00040000 0x00340000 0x001000>, /* ap 68 */
+ <0x00020000 0x00320000 0x004000>, /* ap 71 */
+ <0x00024000 0x00324000 0x002000>, /* ap 72 */
+ <0x00026000 0x00326000 0x001000>, /* ap 73 */
+ <0x00027000 0x00327000 0x001000>, /* ap 74 */
+ <0x00028000 0x00328000 0x001000>, /* ap 75 */
+ <0x00029000 0x00329000 0x001000>, /* ap 76 */
+ <0x00030000 0x00330000 0x010000>, /* ap 77 */
+ <0x0002a000 0x0032a000 0x002000>, /* ap 90 */
+ <0x0002c000 0x0032c000 0x004000>, /* ap 91 */
+ <0x00010000 0x00310000 0x008000>, /* ap 92 */
+ <0x00018000 0x00318000 0x004000>, /* ap 93 */
+ <0x0001c000 0x0031c000 0x002000>, /* ap 94 */
+ <0x0001e000 0x0031e000 0x002000>; /* ap 95 */
+};
+
+&l4_cfg_target_0 {
+ ranges = <0x00000000 0x00000000 0x00010000>,
+ <0x00010000 0x00010000 0x00008000>,
+ <0x00018000 0x00018000 0x00004000>,
+ <0x0001c000 0x0001c000 0x00002000>,
+ <0x0001e000 0x0001e000 0x00002000>,
+ <0x00020000 0x00020000 0x00004000>,
+ <0x00024000 0x00024000 0x00002000>,
+ <0x00026000 0x00026000 0x00001000>,
+ <0x00027000 0x00027000 0x00001000>,
+ <0x00028000 0x00028000 0x00001000>,
+ <0x00029000 0x00029000 0x00001000>,
+ <0x0002a000 0x0002a000 0x00002000>,
+ <0x0002c000 0x0002c000 0x00004000>,
+ <0x00030000 0x00030000 0x00010000>;
+};
+
+&pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/include/ "omap446x-clocks.dtsi"
diff --git a/src/arm/ti/omap/omap446x-clocks.dtsi b/src/arm/ti/omap/omap446x-clocks.dtsi
new file mode 100644
index 0000000..d9362fe
--- /dev/null
+++ b/src/arm/ti/omap/omap446x-clocks.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&prm_clocks {
+ div_ts_ck: div_ts_ck@1888 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "div_ts_ck";
+ clocks = <&l4_wkup_clk_mux_ck>;
+ ti,bit-shift = <24>;
+ reg = <0x1888>;
+ ti,dividers = <8>, <16>, <32>;
+ };
+
+ bandgap_ts_fclk: bandgap_ts_fclk@1888 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "bandgap_ts_fclk";
+ clocks = <&div_ts_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x1888>;
+ };
+};
diff --git a/src/arm/ti/omap/omap44xx-clocks.dtsi b/src/arm/ti/omap/omap44xx-clocks.dtsi
new file mode 100644
index 0000000..8df73d2
--- /dev/null
+++ b/src/arm/ti/omap/omap44xx-clocks.dtsi
@@ -0,0 +1,1483 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&cm1_clocks {
+ extalt_clkin_ck: extalt_clkin_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "extalt_clkin_ck";
+ clock-frequency = <59000000>;
+ };
+
+ pad_clks_src_ck: pad_clks_src_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "pad_clks_src_ck";
+ clock-frequency = <12000000>;
+ };
+
+ pad_clks_ck: pad_clks_ck@108 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "pad_clks_ck";
+ clocks = <&pad_clks_src_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0108>;
+ };
+
+ pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "pad_slimbus_core_clks_ck";
+ clock-frequency = <12000000>;
+ };
+
+ secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "secure_32k_clk_src_ck";
+ clock-frequency = <32768>;
+ };
+
+ slimbus_src_clk: slimbus_src_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "slimbus_src_clk";
+ clock-frequency = <12000000>;
+ };
+
+ slimbus_clk: slimbus_clk@108 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "slimbus_clk";
+ clocks = <&slimbus_src_clk>;
+ ti,bit-shift = <10>;
+ reg = <0x0108>;
+ };
+
+ sys_32k_ck: sys_32k_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "sys_32k_ck";
+ clock-frequency = <32768>;
+ };
+
+ virt_12000000_ck: virt_12000000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_12000000_ck";
+ clock-frequency = <12000000>;
+ };
+
+ virt_13000000_ck: virt_13000000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_13000000_ck";
+ clock-frequency = <13000000>;
+ };
+
+ virt_16800000_ck: virt_16800000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_16800000_ck";
+ clock-frequency = <16800000>;
+ };
+
+ virt_19200000_ck: virt_19200000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_19200000_ck";
+ clock-frequency = <19200000>;
+ };
+
+ virt_26000000_ck: virt_26000000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_26000000_ck";
+ clock-frequency = <26000000>;
+ };
+
+ virt_27000000_ck: virt_27000000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_27000000_ck";
+ clock-frequency = <27000000>;
+ };
+
+ virt_38400000_ck: virt_38400000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_38400000_ck";
+ clock-frequency = <38400000>;
+ };
+
+ tie_low_clock_ck: tie_low_clock_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "tie_low_clock_ck";
+ clock-frequency = <0>;
+ };
+
+ utmi_phy_clkout_ck: utmi_phy_clkout_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "utmi_phy_clkout_ck";
+ clock-frequency = <60000000>;
+ };
+
+ xclk60mhsp1_ck: xclk60mhsp1_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "xclk60mhsp1_ck";
+ clock-frequency = <60000000>;
+ };
+
+ xclk60mhsp2_ck: xclk60mhsp2_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "xclk60mhsp2_ck";
+ clock-frequency = <60000000>;
+ };
+
+ xclk60motg_ck: xclk60motg_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "xclk60motg_ck";
+ clock-frequency = <60000000>;
+ };
+
+ dpll_abe_ck: dpll_abe_ck@1e0 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-m4xen-clock";
+ clock-output-names = "dpll_abe_ck";
+ clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>;
+ reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+ };
+
+ dpll_abe_x2_ck: dpll_abe_x2_ck@1f0 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_abe_x2_ck";
+ clocks = <&dpll_abe_ck>;
+ reg = <0x01f0>;
+ };
+
+ dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_abe_m2x2_ck";
+ clocks = <&dpll_abe_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x01f0>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ abe_24m_fclk: abe_24m_fclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "abe_24m_fclk";
+ clocks = <&dpll_abe_m2x2_ck>;
+ clock-mult = <1>;
+ clock-div = <8>;
+ };
+
+ abe_clk: abe_clk@108 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "abe_clk";
+ clocks = <&dpll_abe_m2x2_ck>;
+ ti,max-div = <4>;
+ reg = <0x0108>;
+ ti,index-power-of-two;
+ };
+
+
+ dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_abe_m3x2_ck";
+ clocks = <&dpll_abe_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x01f4>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@12c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "core_hsd_byp_clk_mux_ck";
+ clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>;
+ ti,bit-shift = <23>;
+ reg = <0x012c>;
+ };
+
+ dpll_core_ck: dpll_core_ck@120 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-core-clock";
+ clock-output-names = "dpll_core_ck";
+ clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>;
+ reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+ };
+
+ dpll_core_x2_ck: dpll_core_x2_ck {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_core_x2_ck";
+ clocks = <&dpll_core_ck>;
+ };
+
+ dpll_core_m6x2_ck: dpll_core_m6x2_ck@140 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m6x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0140>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_core_m2_ck: dpll_core_m2_ck@130 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m2_ck";
+ clocks = <&dpll_core_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0130>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ ddrphy_ck: ddrphy_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "ddrphy_ck";
+ clocks = <&dpll_core_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ dpll_core_m5x2_ck: dpll_core_m5x2_ck@13c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m5x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x013c>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ div_core_ck: div_core_ck@100 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "div_core_ck";
+ clocks = <&dpll_core_m5x2_ck>;
+ reg = <0x0100>;
+ ti,max-div = <2>;
+ };
+
+ div_iva_hs_clk: div_iva_hs_clk@1dc {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "div_iva_hs_clk";
+ clocks = <&dpll_core_m5x2_ck>;
+ ti,max-div = <4>;
+ reg = <0x01dc>;
+ ti,index-power-of-two;
+ };
+
+ div_mpu_hs_clk: div_mpu_hs_clk@19c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "div_mpu_hs_clk";
+ clocks = <&dpll_core_m5x2_ck>;
+ ti,max-div = <4>;
+ reg = <0x019c>;
+ ti,index-power-of-two;
+ };
+
+ dpll_core_m4x2_ck: dpll_core_m4x2_ck@138 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m4x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0138>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dll_clk_div_ck: dll_clk_div_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dll_clk_div_ck";
+ clocks = <&dpll_core_m4x2_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_abe_m2_ck";
+ clocks = <&dpll_abe_ck>;
+ ti,max-div = <31>;
+ reg = <0x01f0>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck@134 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "dpll_core_m3x2_gate_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0134>;
+ };
+
+ dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@134 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clock-output-names = "dpll_core_m3x2_div_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <31>;
+ reg = <0x0134>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_core_m3x2_ck: dpll_core_m3x2_ck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clock-output-names = "dpll_core_m3x2_ck";
+ clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>;
+ };
+
+ dpll_core_m7x2_ck: dpll_core_m7x2_ck@144 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m7x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0144>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@1ac {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "iva_hsd_byp_clk_mux_ck";
+ clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>;
+ ti,bit-shift = <23>;
+ reg = <0x01ac>;
+ };
+
+ dpll_iva_ck: dpll_iva_ck@1a0 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_iva_ck";
+ clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>;
+ reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+ assigned-clocks = <&dpll_iva_ck>;
+ assigned-clock-rates = <931200000>;
+ };
+
+ dpll_iva_x2_ck: dpll_iva_x2_ck {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_iva_x2_ck";
+ clocks = <&dpll_iva_ck>;
+ };
+
+ dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@1b8 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_iva_m4x2_ck";
+ clocks = <&dpll_iva_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x01b8>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ assigned-clocks = <&dpll_iva_m4x2_ck>;
+ assigned-clock-rates = <465600000>;
+ };
+
+ dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_iva_m5x2_ck";
+ clocks = <&dpll_iva_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x01bc>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ assigned-clocks = <&dpll_iva_m5x2_ck>;
+ assigned-clock-rates = <266100000>;
+ };
+
+ dpll_mpu_ck: dpll_mpu_ck@160 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_mpu_ck";
+ clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>;
+ reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+ };
+
+ dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_mpu_m2_ck";
+ clocks = <&dpll_mpu_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0170>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ per_hs_clk_div_ck: per_hs_clk_div_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "per_hs_clk_div_ck";
+ clocks = <&dpll_abe_m3x2_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ usb_hs_clk_div_ck: usb_hs_clk_div_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "usb_hs_clk_div_ck";
+ clocks = <&dpll_abe_m3x2_ck>;
+ clock-mult = <1>;
+ clock-div = <3>;
+ };
+
+ l3_div_ck: l3_div_ck@100 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "l3_div_ck";
+ clocks = <&div_core_ck>;
+ ti,bit-shift = <4>;
+ ti,max-div = <2>;
+ reg = <0x0100>;
+ };
+
+ l4_div_ck: l4_div_ck@100 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "l4_div_ck";
+ clocks = <&l3_div_ck>;
+ ti,bit-shift = <8>;
+ ti,max-div = <2>;
+ reg = <0x0100>;
+ };
+
+ lp_clk_div_ck: lp_clk_div_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "lp_clk_div_ck";
+ clocks = <&dpll_abe_m2x2_ck>;
+ clock-mult = <1>;
+ clock-div = <16>;
+ };
+
+ mpu_periphclk: mpu_periphclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "mpu_periphclk";
+ clocks = <&dpll_mpu_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ ocp_abe_iclk: ocp_abe_iclk@528 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "ocp_abe_iclk";
+ clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 24>;
+ ti,bit-shift = <24>;
+ reg = <0x0528>;
+ ti,dividers = <2>, <1>;
+ };
+
+ per_abe_24m_fclk: per_abe_24m_fclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "per_abe_24m_fclk";
+ clocks = <&dpll_abe_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ dummy_ck: dummy_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "dummy_ck";
+ clock-frequency = <0>;
+ };
+};
+
+&prm_clocks {
+ sys_clkin_ck: sys_clkin_ck@110 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "sys_clkin_ck";
+ clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+ reg = <0x0110>;
+ ti,index-starts-at-one;
+ };
+
+ abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@108 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "abe_dpll_bypass_clk_mux_ck";
+ clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+ ti,bit-shift = <24>;
+ reg = <0x0108>;
+ };
+
+ abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@10c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "abe_dpll_refclk_mux_ck";
+ clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+ reg = <0x010c>;
+ };
+
+ dbgclk_mux_ck: dbgclk_mux_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dbgclk_mux_ck";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@108 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "l4_wkup_clk_mux_ck";
+ clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>;
+ reg = <0x0108>;
+ };
+
+ syc_clk_div_ck: syc_clk_div_ck@100 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "syc_clk_div_ck";
+ clocks = <&sys_clkin_ck>;
+ reg = <0x0100>;
+ ti,max-div = <2>;
+ };
+
+ usim_ck: usim_ck@1858 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "usim_ck";
+ clocks = <&dpll_per_m4x2_ck>;
+ ti,bit-shift = <24>;
+ reg = <0x1858>;
+ ti,dividers = <14>, <18>;
+ };
+
+ usim_fclk: usim_fclk@1858 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "usim_fclk";
+ clocks = <&usim_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x1858>;
+ };
+
+ trace_clk_div_ck: trace_clk_div_ck {
+ #clock-cells = <0>;
+ compatible = "ti,clkdm-gate-clock";
+ clock-output-names = "trace_clk_div_ck";
+ clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 24>;
+ };
+};
+
+&prm_clockdomains {
+ emu_sys_clkdm: emu_sys_clkdm {
+ compatible = "ti,clockdomain";
+ clock-output-names = "emu_sys_clkdm";
+ clocks = <&trace_clk_div_ck>;
+ };
+};
+
+&cm2_clocks {
+ per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@14c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "per_hsd_byp_clk_mux_ck";
+ clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>;
+ ti,bit-shift = <23>;
+ reg = <0x014c>;
+ };
+
+ dpll_per_ck: dpll_per_ck@140 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_per_ck";
+ clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>;
+ reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+ };
+
+ dpll_per_m2_ck: dpll_per_m2_ck@150 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m2_ck";
+ clocks = <&dpll_per_ck>;
+ ti,max-div = <31>;
+ reg = <0x0150>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_per_x2_ck: dpll_per_x2_ck@150 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_per_x2_ck";
+ clocks = <&dpll_per_ck>;
+ reg = <0x0150>;
+ };
+
+ dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m2x2_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0150>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck@154 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "dpll_per_m3x2_gate_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0154>;
+ };
+
+ dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@154 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clock-output-names = "dpll_per_m3x2_div_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,max-div = <31>;
+ reg = <0x0154>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_per_m3x2_ck: dpll_per_m3x2_ck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clock-output-names = "dpll_per_m3x2_ck";
+ clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>;
+ };
+
+ dpll_per_m4x2_ck: dpll_per_m4x2_ck@158 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m4x2_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0158>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_per_m5x2_ck: dpll_per_m5x2_ck@15c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m5x2_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x015c>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_per_m6x2_ck: dpll_per_m6x2_ck@160 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m6x2_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0160>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_per_m7x2_ck: dpll_per_m7x2_ck@164 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m7x2_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0164>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_usb_ck: dpll_usb_ck@180 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-j-type-clock";
+ clock-output-names = "dpll_usb_ck";
+ clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>;
+ reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+ };
+
+ dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@1b4 {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clock-output-names = "dpll_usb_clkdcoldo_ck";
+ clocks = <&dpll_usb_ck>;
+ ti,clock-div = <1>;
+ ti,autoidle-shift = <8>;
+ reg = <0x01b4>;
+ ti,clock-mult = <1>;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_usb_m2_ck";
+ clocks = <&dpll_usb_ck>;
+ ti,max-div = <127>;
+ ti,autoidle-shift = <8>;
+ reg = <0x0190>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ ducati_clk_mux_ck: ducati_clk_mux_ck@100 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "ducati_clk_mux_ck";
+ clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>;
+ reg = <0x0100>;
+ };
+
+ func_12m_fclk: func_12m_fclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "func_12m_fclk";
+ clocks = <&dpll_per_m2x2_ck>;
+ clock-mult = <1>;
+ clock-div = <16>;
+ };
+
+ func_24m_clk: func_24m_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "func_24m_clk";
+ clocks = <&dpll_per_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ func_24mc_fclk: func_24mc_fclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "func_24mc_fclk";
+ clocks = <&dpll_per_m2x2_ck>;
+ clock-mult = <1>;
+ clock-div = <8>;
+ };
+
+ func_48m_fclk: func_48m_fclk@108 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "func_48m_fclk";
+ clocks = <&dpll_per_m2x2_ck>;
+ reg = <0x0108>;
+ ti,dividers = <4>, <8>;
+ };
+
+ func_48mc_fclk: func_48mc_fclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "func_48mc_fclk";
+ clocks = <&dpll_per_m2x2_ck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ func_64m_fclk: func_64m_fclk@108 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "func_64m_fclk";
+ clocks = <&dpll_per_m4x2_ck>;
+ reg = <0x0108>;
+ ti,dividers = <2>, <4>;
+ };
+
+ func_96m_fclk: func_96m_fclk@108 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "func_96m_fclk";
+ clocks = <&dpll_per_m2x2_ck>;
+ reg = <0x0108>;
+ ti,dividers = <2>, <4>;
+ };
+
+ init_60m_fclk: init_60m_fclk@104 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "init_60m_fclk";
+ clocks = <&dpll_usb_m2_ck>;
+ reg = <0x0104>;
+ ti,dividers = <1>, <8>;
+ };
+
+ per_abe_nc_fclk: per_abe_nc_fclk@108 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "per_abe_nc_fclk";
+ clocks = <&dpll_abe_m2_ck>;
+ reg = <0x0108>;
+ ti,max-div = <2>;
+ };
+
+ usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "usb_phy_cm_clk32k";
+ clocks = <&sys_32k_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0640>;
+ };
+};
+
+&cm2_clockdomains {
+ l3_init_clkdm: l3_init_clkdm {
+ compatible = "ti,clockdomain";
+ clock-output-names = "l3_init_clkdm";
+ clocks = <&dpll_usb_ck>;
+ };
+};
+
+&scrm_clocks {
+ auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk0_src_gate_ck";
+ clocks = <&dpll_core_m3x2_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0310>;
+ };
+
+ auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk0_src_mux_ck";
+ clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0310>;
+ };
+
+ auxclk0_src_ck: auxclk0_src_ck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clock-output-names = "auxclk0_src_ck";
+ clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
+ };
+
+ auxclk0_ck: auxclk0_ck@310 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "auxclk0_ck";
+ clocks = <&auxclk0_src_ck>;
+ ti,bit-shift = <16>;
+ ti,max-div = <16>;
+ reg = <0x0310>;
+ };
+
+ auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk1_src_gate_ck";
+ clocks = <&dpll_core_m3x2_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0314>;
+ };
+
+ auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk1_src_mux_ck";
+ clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0314>;
+ };
+
+ auxclk1_src_ck: auxclk1_src_ck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clock-output-names = "auxclk1_src_ck";
+ clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
+ };
+
+ auxclk1_ck: auxclk1_ck@314 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "auxclk1_ck";
+ clocks = <&auxclk1_src_ck>;
+ ti,bit-shift = <16>;
+ ti,max-div = <16>;
+ reg = <0x0314>;
+ };
+
+ auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk2_src_gate_ck";
+ clocks = <&dpll_core_m3x2_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0318>;
+ };
+
+ auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk2_src_mux_ck";
+ clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0318>;
+ };
+
+ auxclk2_src_ck: auxclk2_src_ck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clock-output-names = "auxclk2_src_ck";
+ clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
+ };
+
+ auxclk2_ck: auxclk2_ck@318 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "auxclk2_ck";
+ clocks = <&auxclk2_src_ck>;
+ ti,bit-shift = <16>;
+ ti,max-div = <16>;
+ reg = <0x0318>;
+ };
+
+ auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk3_src_gate_ck";
+ clocks = <&dpll_core_m3x2_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x031c>;
+ };
+
+ auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk3_src_mux_ck";
+ clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x031c>;
+ };
+
+ auxclk3_src_ck: auxclk3_src_ck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clock-output-names = "auxclk3_src_ck";
+ clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
+ };
+
+ auxclk3_ck: auxclk3_ck@31c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "auxclk3_ck";
+ clocks = <&auxclk3_src_ck>;
+ ti,bit-shift = <16>;
+ ti,max-div = <16>;
+ reg = <0x031c>;
+ };
+
+ auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk4_src_gate_ck";
+ clocks = <&dpll_core_m3x2_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0320>;
+ };
+
+ auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk4_src_mux_ck";
+ clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0320>;
+ };
+
+ auxclk4_src_ck: auxclk4_src_ck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clock-output-names = "auxclk4_src_ck";
+ clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
+ };
+
+ auxclk4_ck: auxclk4_ck@320 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "auxclk4_ck";
+ clocks = <&auxclk4_src_ck>;
+ ti,bit-shift = <16>;
+ ti,max-div = <16>;
+ reg = <0x0320>;
+ };
+
+ auxclk5_src_gate_ck: auxclk5_src_gate_ck@324 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk5_src_gate_ck";
+ clocks = <&dpll_core_m3x2_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0324>;
+ };
+
+ auxclk5_src_mux_ck: auxclk5_src_mux_ck@324 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk5_src_mux_ck";
+ clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0324>;
+ };
+
+ auxclk5_src_ck: auxclk5_src_ck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clock-output-names = "auxclk5_src_ck";
+ clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>;
+ };
+
+ auxclk5_ck: auxclk5_ck@324 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "auxclk5_ck";
+ clocks = <&auxclk5_src_ck>;
+ ti,bit-shift = <16>;
+ ti,max-div = <16>;
+ reg = <0x0324>;
+ };
+
+ auxclkreq0_ck: auxclkreq0_ck@210 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq0_ck";
+ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x0210>;
+ };
+
+ auxclkreq1_ck: auxclkreq1_ck@214 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq1_ck";
+ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x0214>;
+ };
+
+ auxclkreq2_ck: auxclkreq2_ck@218 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq2_ck";
+ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x0218>;
+ };
+
+ auxclkreq3_ck: auxclkreq3_ck@21c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq3_ck";
+ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x021c>;
+ };
+
+ auxclkreq4_ck: auxclkreq4_ck@220 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq4_ck";
+ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x0220>;
+ };
+
+ auxclkreq5_ck: auxclkreq5_ck@224 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq5_ck";
+ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x0224>;
+ };
+};
+
+&cm1 {
+ mpuss_cm: mpuss_cm@300 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "mpuss_cm";
+ reg = <0x300 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x300 0x100>;
+
+ mpuss_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "mpuss_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ tesla_cm: tesla_cm@400 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "tesla_cm";
+ reg = <0x400 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x400 0x100>;
+
+ tesla_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "tesla_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ abe_cm: abe_cm@500 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "abe_cm";
+ reg = <0x500 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x500 0x100>;
+
+ abe_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "abe_clkctrl";
+ reg = <0x20 0x6c>;
+ #clock-cells = <2>;
+ };
+ };
+
+};
+
+&cm2 {
+ l4_ao_cm: l4_ao_cm@600 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l4_ao_cm";
+ reg = <0x600 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x600 0x100>;
+
+ l4_ao_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4_ao_clkctrl";
+ reg = <0x20 0x1c>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l3_1_cm: l3_1_cm@700 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l3_1_cm";
+ reg = <0x700 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x700 0x100>;
+
+ l3_1_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3_1_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l3_2_cm: l3_2_cm@800 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l3_2_cm";
+ reg = <0x800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x800 0x100>;
+
+ l3_2_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3_2_clkctrl";
+ reg = <0x20 0x14>;
+ #clock-cells = <2>;
+ };
+ };
+
+ ducati_cm: ducati_cm@900 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "ducati_cm";
+ reg = <0x900 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x900 0x100>;
+
+ ducati_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "ducati_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l3_dma_cm: l3_dma_cm@a00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l3_dma_cm";
+ reg = <0xa00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xa00 0x100>;
+
+ l3_dma_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3_dma_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l3_emif_cm: l3_emif_cm@b00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l3_emif_cm";
+ reg = <0xb00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xb00 0x100>;
+
+ l3_emif_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3_emif_clkctrl";
+ reg = <0x20 0x1c>;
+ #clock-cells = <2>;
+ };
+ };
+
+ d2d_cm: d2d_cm@c00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "d2d_cm";
+ reg = <0xc00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xc00 0x100>;
+
+ d2d_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "d2d_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l4_cfg_cm: l4_cfg_cm@d00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l4_cfg_cm";
+ reg = <0xd00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xd00 0x100>;
+
+ l4_cfg_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4_cfg_clkctrl";
+ reg = <0x20 0x14>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l3_instr_cm: l3_instr_cm@e00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l3_instr_cm";
+ reg = <0xe00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xe00 0x100>;
+
+ l3_instr_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3_instr_clkctrl";
+ reg = <0x20 0x24>;
+ #clock-cells = <2>;
+ };
+ };
+
+ ivahd_cm: ivahd_cm@f00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "ivahd_cm";
+ reg = <0xf00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xf00 0x100>;
+
+ ivahd_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "ivahd_clkctrl";
+ reg = <0x20 0xc>;
+ #clock-cells = <2>;
+ };
+ };
+
+ iss_cm: iss_cm@1000 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "iss_cm";
+ reg = <0x1000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1000 0x100>;
+
+ iss_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "iss_clkctrl";
+ reg = <0x20 0xc>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l3_dss_cm: l3_dss_cm@1100 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l3_dss_cm";
+ reg = <0x1100 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1100 0x100>;
+
+ l3_dss_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3_dss_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l3_gfx_cm: l3_gfx_cm@1200 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l3_gfx_cm";
+ reg = <0x1200 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1200 0x100>;
+
+ l3_gfx_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3_gfx_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l3_init_cm: l3_init_cm@1300 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l3_init_cm";
+ reg = <0x1300 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1300 0x100>;
+
+ l3_init_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3_init_clkctrl";
+ reg = <0x20 0xc4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l4_per_cm: clock@1400 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l4_per_cm";
+ reg = <0x1400 0x200>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1400 0x200>;
+
+ l4_per_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4_per_clkctrl";
+ reg = <0x20 0x144>;
+ #clock-cells = <2>;
+ };
+
+ l4_secure_clkctrl: clock@1a0 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4_secure_clkctrl";
+ reg = <0x1a0 0x3c>;
+ #clock-cells = <2>;
+ };
+ };
+};
+
+&prm {
+ l4_wkup_cm: l4_wkup_cm@1800 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l4_wkup_cm";
+ reg = <0x1800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1800 0x100>;
+
+ l4_wkup_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4_wkup_clkctrl";
+ reg = <0x20 0x5c>;
+ #clock-cells = <2>;
+ };
+ };
+
+ emu_sys_cm: emu_sys_cm@1a00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "emu_sys_cm";
+ reg = <0x1a00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1a00 0x100>;
+
+ emu_sys_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "emu_sys_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap5-board-common.dtsi b/src/arm/ti/omap/omap5-board-common.dtsi
new file mode 100644
index 0000000..8946b55
--- /dev/null
+++ b/src/arm/ti/omap/omap5-board-common.dtsi
@@ -0,0 +1,755 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ aliases {
+ display0 = &hdmi0;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ vmain: fixedregulator-vmain {
+ compatible = "regulator-fixed";
+ regulator-name = "vmain";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vsys_cobra: fixedregulator-vsys_cobra {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_cobra";
+ vin-supply = <&vmain>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vmmcsd_fixed: fixedregulator-mmcsd {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ mmc3_pwrseq: sdhci0_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&clk32kgaudio>;
+ clock-names = "ext_clock";
+ };
+
+ vmmcsdio_fixed: fixedregulator-mmcsdio {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsdio_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>; /* gpio140 WLAN_EN */
+ enable-active-high;
+ startup-delay-us = <70000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_pins>;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2-phy-pins {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
+ clocks = <&auxclk1_ck>;
+ clock-names = "main_clk";
+ clock-frequency = <19200000>;
+ #phy-cells = <0>;
+ };
+
+ /* HS USB Host PHY on PORT 3 */
+ hsusb3_phy: hsusb3_phy {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
+ #phy-cells = <0>;
+ };
+
+ tpd12s015: encoder {
+ compatible = "ti,tpd12s015";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpd12s015_pins>;
+
+ /* gpios defined in the board specific dts */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ hdmi0: connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "b";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+
+ sound: sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "omap5-uevm";
+
+ ti,jack-detection;
+ ti,mclk-freq = <19200000>;
+
+ ti,mcpdm = <&mcpdm>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias",
+ "AFML", "Line In",
+ "AFMR", "Line In";
+ };
+};
+
+&gpio8 {
+ /* TI trees use GPIO instead of msecure, see also muxing */
+ msecure-hog {
+ gpio-hog;
+ gpios = <10 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "gpio8_234/msecure";
+ };
+};
+
+&omap5_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &usbhost_pins
+ &led_gpio_pins
+ >;
+
+ twl6040_pins: twl6040-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
+ >;
+ };
+
+ mcpdm_pins: mcpdm-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
+ OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
+ OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
+ OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
+ OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
+ >;
+ };
+
+ mcbsp1_pins: mcbsp1-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
+ OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
+ OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
+ OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
+ >;
+ };
+
+ mcbsp2_pins: mcbsp2-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
+ OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
+ OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
+ OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ mcspi2_pins: mcspi2-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
+ OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
+ OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */
+ OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */
+ >;
+ };
+
+ mcspi3_pins: mcspi3-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1) /* mcspi3_somi */
+ OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */
+ OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1) /* mcspi3_simo */
+ OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1) /* mcspi3_clk */
+ >;
+ };
+
+ mmc3_pins: mmc3-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
+ OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
+ OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
+ OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
+ OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
+ OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
+ >;
+ };
+
+ wlan_pins: wlan-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */
+ >;
+ };
+
+ /* TI trees use GPIO mode; msecure mode does not work reliably? */
+ palmas_msecure_pins: palmas-msecure-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
+ >;
+ };
+
+ usbhost_pins: usbhost-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
+ OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
+
+ OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
+ OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
+
+ OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
+ OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
+ >;
+ };
+
+ led_gpio_pins: led-gpio-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
+ >;
+ };
+
+ uart1_pins: uart1-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
+ OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
+ OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
+ OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
+ OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
+ >;
+ };
+
+ uart5_pins: uart5-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
+ OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
+ OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
+ OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
+ >;
+ };
+
+ dss_hdmi_pins: dss-hdmi-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x13c, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */
+ OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */
+ >;
+ };
+
+ tpd12s015_pins: tpd12s015-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
+ >;
+ };
+};
+
+&omap5_pmx_wkup {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &usbhost_wkup_pins
+ >;
+
+ palmas_sys_nirq_pins: palmas-sys-nirq-pins {
+ pinctrl-single,pins = <
+ /* sys_nirq1 is pulled down as the SoC is inverting it for GIC */
+ OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ usbhost_wkup_pins: usbhost-wkup-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
+ >;
+ };
+
+ wlcore_irq_pin: wlcore-irq-pin-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */
+ >;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&ldo9_reg>;
+ bus-width = <4>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&mmc3 {
+ vmmc-supply = <&vmmcsdio_fixed>;
+ mmc-pwrseq = <&mmc3_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ cap-power-off-card;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+ interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+ &omap5_pmx_core 0x16a>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlcore_irq_pin>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */
+ ref-clock-frequency = <26000000>;
+ };
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ status = "disabled";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <400000>;
+
+ palmas: palmas@48 {
+ compatible = "ti,palmas";
+ /* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x48>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,system-power-controller;
+ ti,mux-pad1 = <0xa1>;
+ ti,mux-pad2 = <0x1b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
+
+ palmas_gpio: gpio {
+ compatible = "ti,palmas-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ extcon_usb3: palmas_usb {
+ compatible = "ti,palmas-usb-vid";
+ ti,enable-vbus-detection;
+ ti,enable-id-detection;
+ ti,wakeup;
+ id-gpios = <&palmas_gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ clk32kgaudio: palmas_clk32k@1 {
+ compatible = "ti,palmas-clk32kgaudio";
+ #clock-cells = <0>;
+ };
+
+ rtc {
+ compatible = "ti,palmas-rtc";
+ interrupt-parent = <&palmas>;
+ interrupts = <8 IRQ_TYPE_NONE>;
+ ti,backup-battery-chargeable;
+ ti,backup-battery-charge-high-current;
+ };
+
+ gpadc: gpadc {
+ compatible = "ti,palmas-gpadc";
+ interrupts = <18 0>,
+ <16 0>,
+ <17 0>;
+ #io-channel-cells = <1>;
+ ti,channel0-current-microamp = <5>;
+ ti,channel3-current-microamp = <10>;
+ };
+
+ palmas_pmic {
+ compatible = "ti,palmas-pmic";
+ interrupt-parent = <&palmas>;
+ interrupts = <14 IRQ_TYPE_NONE>;
+ interrupt-names = "short-irq";
+
+ ti,ldo6-vibrator;
+
+ smps123-in-supply = <&vsys_cobra>;
+ smps45-in-supply = <&vsys_cobra>;
+ smps6-in-supply = <&vsys_cobra>;
+ smps7-in-supply = <&vsys_cobra>;
+ smps8-in-supply = <&vsys_cobra>;
+ smps9-in-supply = <&vsys_cobra>;
+ smps10_out2-in-supply = <&vsys_cobra>;
+ smps10_out1-in-supply = <&vsys_cobra>;
+ ldo1-in-supply = <&vsys_cobra>;
+ ldo2-in-supply = <&vsys_cobra>;
+ ldo3-in-supply = <&vdds_1v8_main>;
+ ldo4-in-supply = <&vdds_1v8_main>;
+ ldo5-in-supply = <&vsys_cobra>;
+ ldo6-in-supply = <&vdds_1v8_main>;
+ ldo7-in-supply = <&vsys_cobra>;
+ ldo8-in-supply = <&vsys_cobra>;
+ ldo9-in-supply = <&vmmcsd_fixed>;
+ ldoln-in-supply = <&vsys_cobra>;
+ ldousb-in-supply = <&vsys_cobra>;
+
+ regulators {
+ smps123_reg: smps123 {
+ /* VDD_OPP_MPU */
+ regulator-name = "smps123";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_OPP_MM */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_DDR3 - over VDD_SMPS6 */
+ regulator-name = "smps6";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdds_1v8_main:
+ smps7_reg: smps7 {
+ /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
+ regulator-name = "smps7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ /* VDD_OPP_CORE */
+ regulator-name = "smps8";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps9_reg: smps9 {
+ /* VDDA_2v1_AUD over VDD_2v1 */
+ regulator-name = "smps9";
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2100000>;
+ ti,smps-range = <0x80>;
+ };
+
+ smps10_out2_reg: smps10_out2 {
+ /* VBUS_5V_OTG */
+ regulator-name = "smps10_out2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps10_out1_reg: smps10_out1 {
+ /* VBUS_5V_OTG */
+ regulator-name = "smps10_out1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ ldo1_reg: ldo1 {
+ /* VDDAPHY_CAM: vdda_csiport */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VCC_2V8_DISP: Does not go anywhere */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ /* Unused */
+ status = "disabled";
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDAPHY_MDM: vdda_lli */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ /* Only if Modem is used */
+ status = "disabled";
+ };
+
+ ldo4_reg: ldo4 {
+ /* VDDAPHY_DISP: vdda_dsiport/hdmi */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo5_reg: ldo5 {
+ /* VDDA_1V8_PHY: usb/sata/hdmi.. */
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo6_reg: ldo6 {
+ /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo7_reg: ldo7 {
+ /* VDD_VPP: vpp1 */
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ /* Only for efuse reprograming! */
+ status = "disabled";
+ };
+
+ ldo8_reg: ldo8 {
+ /* VDD_3v0: Does not go anywhere */
+ regulator-name = "ldo8";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ /* Unused */
+ status = "disabled";
+ };
+
+ ldo9_reg: ldo9 {
+ /* VCC_DV_SDIO: vdds_sdcard */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ regen3_reg: regen3 {
+ /* REGEN3 controls LDO9 supply to card */
+ regulator-name = "regen3";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+
+ palmas_power_button: palmas_power_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&palmas>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ };
+ };
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ #clock-cells = <0>;
+ reg = <0x4b>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&twl6040_pins>;
+
+ /* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_LOW>;
+
+ /* audpwron gpio defined in the board specific dts */
+
+ vio-supply = <&smps7_reg>;
+ v2v1-supply = <&smps9_reg>;
+ enable-active-high;
+
+ clocks = <&clk32kgaudio>, <&fref_xtal_ck>;
+ clock-names = "clk32k", "mclk";
+ };
+};
+
+&mcpdm_module {
+ /* Module on the SoC needs external clock from the PMIC */
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcpdm_pins>;
+ status = "okay";
+};
+
+&mcpdm {
+ clocks = <&twl6040>;
+ clock-names = "pdmclk";
+};
+
+&mcbsp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+ status = "okay";
+};
+
+&mcbsp2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+ status = "okay";
+};
+
+&usbhshost {
+ port2-mode = "ehci-hsic";
+ port3-mode = "ehci-hsic";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy &hsusb3_phy>;
+};
+
+&usb3 {
+ extcon = <&extcon_usb3>;
+ vbus-supply = <&smps10_out1_reg>;
+};
+
+&dwc3 {
+ extcon = <&extcon_usb3>;
+ dr_mode = "otg";
+};
+
+&mcspi1 {
+
+};
+
+&mcspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi2_pins>;
+};
+
+&mcspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi3_pins>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <&omap5_pmx_core 0x19c>;
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_pins>;
+};
+
+&cpu0 {
+ cpu0-supply = <&smps123_reg>;
+};
+
+&dss {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+
+ /* vdda-supply populated in board specific dts file */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_hdmi_pins>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap5-cm-t54.dts b/src/arm/ti/omap/omap5-cm-t54.dts
new file mode 100644
index 0000000..6767382
--- /dev/null
+++ b/src/arm/ti/omap/omap5-cm-t54.dts
@@ -0,0 +1,697 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for CompuLab CM-T54
+ */
+/dts-v1/;
+
+#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "CompuLab CM-T54";
+ compatible = "compulab,omap5-cm-t54", "ti,omap5";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x7f000000>; /* 2048 MB */
+ };
+
+ aliases {
+ display0 = &hdmi0;
+ display1 = &dvi0;
+ display2 = &lcd0;
+ };
+
+ vmmcsd_fixed: fixed-regulator-mmcsd {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vwlan_pdn_fixed: fixed-regulator-vwlan-pdn {
+ compatible = "regulator-fixed";
+ regulator-name = "vwlan_pdn_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&ldo2_reg>;
+ gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* gpio4_109 */
+ startup-delay-us = <1000>;
+ enable-active-high;
+ };
+
+ vwlan_fixed: fixed-regulator-vwlan {
+ compatible = "regulator-fixed";
+ regulator-name = "vwlan_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vwlan_pdn_fixed>;
+ gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio4_110 */
+ startup-delay-us = <1000>;
+ enable-active-high;
+ };
+
+ ads7846reg: ads7846-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "ads7846-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2-phy-pins {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */
+ #phy-cells = <0>;
+ };
+
+ /* HS USB Host PHY on PORT 3 */
+ hsusb3_phy: hsusb3_phy {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */
+ #phy-cells = <0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "Heartbeat";
+ gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+
+ lcd0: display {
+ compatible = "startek,startek-kd050c", "panel-dpi";
+ label = "lcd";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
+
+ panel-timing {
+ clock-frequency = <33000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <43>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ vsync-len = <3>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_lcd_out>;
+ };
+ };
+ };
+
+ hdmi0: connector0 {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_conn_pins>;
+
+ hpd-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+ };
+
+ tfp410: encoder0 {
+ compatible = "ti,tfp410";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint {
+ remote-endpoint = <&dpi_dvi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector1 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ digital;
+
+ ddc-i2c-bus = <&i2c2>;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+};
+
+&omap5_pmx_wkup {
+
+ ads7846_pins: ads7846-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x0042, PIN_INPUT_PULLDOWN | MUX_MODE6) /* llib_wakereqin.gpio1_wk15 */
+ >;
+ };
+
+ palmas_sys_nirq_pins: palmas-sys-nirq-pins {
+ pinctrl-single,pins = <
+ /* sys_nirq1 is pulled down as the SoC is inverting it for GIC */
+ OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+};
+
+&omap5_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &led_gpio_pins
+ &usbhost_pins
+ >;
+
+ led_gpio_pins: led-gpio-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x00b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x01f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */
+ OMAP5_IOPAD(0x01f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x01b8, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+ OMAP5_IOPAD(0x01ba, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */
+ OMAP5_IOPAD(0x01e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */
+ OMAP5_IOPAD(0x01e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data2 */
+ OMAP5_IOPAD(0x01e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data3 */
+ OMAP5_IOPAD(0x01ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data0 */
+ OMAP5_IOPAD(0x01ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data1 */
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x0040, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */
+ OMAP5_IOPAD(0x0042, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */
+ OMAP5_IOPAD(0x0044, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data0 */
+ OMAP5_IOPAD(0x0046, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data1 */
+ OMAP5_IOPAD(0x0048, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data2 */
+ OMAP5_IOPAD(0x004a, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data3 */
+ OMAP5_IOPAD(0x004c, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data4 */
+ OMAP5_IOPAD(0x004e, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data5 */
+ OMAP5_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data6 */
+ OMAP5_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data7 */
+ >;
+ };
+
+ mmc3_pins: mmc3-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
+ OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
+ OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
+ OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
+ OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
+ OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
+ >;
+ };
+
+ wlan_gpios_pins: wlan-gpios-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_ul_data.gpio4_109 */
+ OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_dl_data.gpio4_110 */
+ >;
+ };
+
+ usbhost_pins: usbhost-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x00c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
+ OMAP5_IOPAD(0x00c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
+
+ OMAP5_IOPAD(0x01dc, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
+ OMAP5_IOPAD(0x01de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
+
+ OMAP5_IOPAD(0x00a8, PIN_OUTPUT | MUX_MODE6) /* hsi2_caready.gpio3_76 */
+ OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */
+ >;
+ };
+
+ dss_hdmi_pins: dss-hdmi-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x013c, PIN_INPUT | MUX_MODE0) /* hdmi_cec */
+ OMAP5_IOPAD(0x0140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl */
+ OMAP5_IOPAD(0x0142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda */
+ >;
+ };
+
+ lcd_pins: lcd-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x0172, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* timer11_pwm_evt.gpio8_227 */
+ >;
+ };
+
+ hdmi_conn_pins: hdmi-conn-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x013e, PIN_INPUT | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
+ >;
+ };
+
+ dss_dpi_pins: dss-dpi-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x0104, PIN_OUTPUT | MUX_MODE3) /* rfbi_data15.dispc_data15 */
+ OMAP5_IOPAD(0x0106, PIN_OUTPUT | MUX_MODE3) /* rfbi_data14.dispc_data14 */
+ OMAP5_IOPAD(0x0108, PIN_OUTPUT | MUX_MODE3) /* rfbi_data13.dispc_data13 */
+ OMAP5_IOPAD(0x010a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data12.dispc_data12 */
+ OMAP5_IOPAD(0x010c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data11.dispc_data11 */
+ OMAP5_IOPAD(0x010e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data10.dispc_data10 */
+ OMAP5_IOPAD(0x0110, PIN_OUTPUT | MUX_MODE3) /* rfbi_data9.dispc_data9 */
+ OMAP5_IOPAD(0x0112, PIN_OUTPUT | MUX_MODE3) /* rfbi_data8.dispc_data8 */
+ OMAP5_IOPAD(0x0114, PIN_OUTPUT | MUX_MODE3) /* rfbi_data7.dispc_data7 */
+ OMAP5_IOPAD(0x0116, PIN_OUTPUT | MUX_MODE3) /* rfbi_data6.dispc_data6 */
+ OMAP5_IOPAD(0x0118, PIN_OUTPUT | MUX_MODE3) /* rfbi_data5.dispc_data5 */
+ OMAP5_IOPAD(0x011a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data4.dispc_data4 */
+ OMAP5_IOPAD(0x011c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data3.dispc_data3 */
+ OMAP5_IOPAD(0x011e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data2.dispc_data2 */
+ OMAP5_IOPAD(0x0120, PIN_OUTPUT | MUX_MODE3) /* rfbi_data1.dispc_data1 */
+ OMAP5_IOPAD(0x0122, PIN_OUTPUT | MUX_MODE3) /* rfbi_data0.dispc_data0 */
+ OMAP5_IOPAD(0x0124, PIN_OUTPUT | MUX_MODE3) /* rfbi_we.dispc_vsync */
+ OMAP5_IOPAD(0x0126, PIN_OUTPUT | MUX_MODE3) /* rfbi_cs0.dispc_hsync */
+ OMAP5_IOPAD(0x0128, PIN_OUTPUT | MUX_MODE3) /* rfbi_a0.dispc_de */
+ OMAP5_IOPAD(0x012a, PIN_OUTPUT | MUX_MODE3) /* rfbi_re.dispc_pclk */
+ OMAP5_IOPAD(0x012c, PIN_OUTPUT | MUX_MODE3) /* rfbi_hsync0.dispc_data17 */
+ OMAP5_IOPAD(0x012e, PIN_OUTPUT | MUX_MODE3) /* rfbi_te_vsync0.dispc_data16 */
+ OMAP5_IOPAD(0x0130, PIN_OUTPUT | MUX_MODE3) /* gpio6_182.dispc_data18 */
+ OMAP5_IOPAD(0x0132, PIN_OUTPUT | MUX_MODE3) /* gpio6_183.dispc_data19 */
+ OMAP5_IOPAD(0x0134, PIN_OUTPUT | MUX_MODE3) /* gpio6_184.dispc_data20 */
+ OMAP5_IOPAD(0x0136, PIN_OUTPUT | MUX_MODE3) /* gpio6_185.dispc_data21 */
+ OMAP5_IOPAD(0x0138, PIN_OUTPUT | MUX_MODE3) /* gpio6_186.dispc_data22 */
+ OMAP5_IOPAD(0x013a, PIN_OUTPUT | MUX_MODE3) /* gpio6_187.dispc_data23 */
+ >;
+ };
+
+ mcspi2_pins: mcspi1-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x00fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
+ OMAP5_IOPAD(0x00fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
+ OMAP5_IOPAD(0x0100, PIN_INPUT | MUX_MODE0) /* mcspi2_somi */
+ OMAP5_IOPAD(0x0102, PIN_INPUT | MUX_MODE0) /* mcspi2_cs0 */
+ >;
+ };
+};
+
+&mcspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi2_pins>;
+
+ /* touch controller */
+ ads7846@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ads7846_pins>;
+
+ compatible = "ti,ads7846";
+ vcc-supply = <&ads7846reg>;
+
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <1500000>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 0>; /* gpio1_wk15 */
+ pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+
+ ti,x-min = /bits/ 16 <0x0>;
+ ti,x-max = /bits/ 16 <0x0fff>;
+ ti,y-min = /bits/ 16 <0x0>;
+ ti,y-max = /bits/ 16 <0x0fff>;
+
+ ti,x-plate-ohms = /bits/ 16 <180>;
+ ti,pressure-max = /bits/ 16 <255>;
+
+ ti,debounce-max = /bits/ 16 <30>;
+ ti,debounce-tol = /bits/ 16 <10>;
+ ti,debounce-rep = /bits/ 16 <1>;
+
+ wakeup-source;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&ldo9_reg>;
+ bus-width = <4>;
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &mmc3_pins
+ &wlan_gpios_pins
+ >;
+ vmmc-supply = <&vwlan_fixed>;
+ bus-width = <4>;
+ ti,non-removable;
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ status = "disabled";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <400000>;
+
+ at24@50 {
+ compatible = "atmel,24c02";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+
+ palmas: palmas@48 {
+ compatible = "ti,palmas";
+ reg = <0x48>;
+ pinctrl-0 = <&palmas_sys_nirq_pins>;
+ pinctrl-names = "default";
+ /* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,system-power-controller;
+
+ extcon_usb3: palmas_usb {
+ compatible = "ti,palmas-usb-vid";
+ ti,enable-vbus-detection;
+ ti,enable-id-detection;
+ ti,wakeup;
+ };
+
+ rtc {
+ compatible = "ti,palmas-rtc";
+ interrupt-parent = <&palmas>;
+ interrupts = <8 IRQ_TYPE_NONE>;
+ };
+
+ palmas_pmic {
+ compatible = "ti,palmas-pmic";
+ interrupt-parent = <&palmas>;
+ interrupts = <14 IRQ_TYPE_NONE>;
+ interrupt-names = "short-irq";
+
+ ti,ldo6-vibrator;
+
+ regulators {
+ smps123_reg: smps123 {
+ /* VDD_OPP_MPU */
+ regulator-name = "smps123";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_OPP_MM */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_DDR3 - over VDD_SMPS6 */
+ regulator-name = "smps6";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps7_reg: smps7 {
+ /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
+ regulator-name = "smps7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ /* VDD_OPP_CORE */
+ regulator-name = "smps8";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps9_reg: smps9 {
+ /* VDDA_2v1_AUD over VDD_2v1 */
+ regulator-name = "smps9";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ ti,smps-range = <0x80>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps10_out2_reg: smps10_out2 {
+ /* VBUS_5V_OTG */
+ regulator-name = "smps10_out2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps10_out1_reg: smps10_out1 {
+ /* VBUS_5V_OTG */
+ regulator-name = "smps10_out1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ ldo1_reg: ldo1 {
+ /* VDDAPHY_CAM: vdda_csiport */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VDD_3V3_WLAN */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <1000>;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VCC_1V5_AUD */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ /* VDDAPHY_DISP: vdda_dsiport/hdmi */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo5_reg: ldo5 {
+ /* VDDA_1V8_PHY: usb/sata/hdmi.. */
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo6_reg: ldo6 {
+ /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo7_reg: ldo7 {
+ /* VDD_VPP: vpp1 */
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ /* Only for efuse reprograming! */
+ status = "disabled";
+ };
+
+ ldo8_reg: ldo8 {
+ /* VDD_3V_GP: act led/serial console */
+ regulator-name = "ldo8";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ /* VCC_DV_SDIO: vdds_sdcard */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ regen3_reg: regen3 {
+ /* REGEN3 controls LDO9 supply to card */
+ regulator-name = "regen3";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <100000>;
+};
+
+&usbhshost {
+ port2-mode = "ehci-hsic";
+ port3-mode = "ehci-hsic";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy &hsusb3_phy>;
+};
+
+&usb3 {
+ extcon = <&extcon_usb3>;
+ vbus-supply = <&smps10_out1_reg>;
+};
+
+&cpu0 {
+ cpu0-supply = <&smps123_reg>;
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpi_dvi_out: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+
+ dpi_lcd_out: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&dsi2 {
+ status = "okay";
+ vdd-supply = <&ldo4_reg>;
+};
+
+&hdmi {
+ status = "okay";
+ vdda-supply = <&ldo4_reg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_hdmi_pins>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ lanes = <1 0 3 2 5 4 7 6>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap5-core-thermal.dtsi b/src/arm/ti/omap/omap5-core-thermal.dtsi
new file mode 100644
index 0000000..e0d8e39
--- /dev/null
+++ b/src/arm/ti/omap/omap5-core-thermal.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP543x SoC CORE thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+core_thermal: core_thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <500>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&bandgap 2>;
+
+ trips {
+ core_crit: core_crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap5-gpu-thermal.dtsi b/src/arm/ti/omap/omap5-gpu-thermal.dtsi
new file mode 100644
index 0000000..1b4b7d9
--- /dev/null
+++ b/src/arm/ti/omap/omap5-gpu-thermal.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP543x SoC GPU thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+gpu_thermal: gpu_thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <500>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&bandgap 1>;
+
+ trips {
+ gpu_crit: gpu_crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap5-igep0050.dts b/src/arm/ti/omap/omap5-igep0050.dts
new file mode 100644
index 0000000..d4ca2e3
--- /dev/null
+++ b/src/arm/ti/omap/omap5-igep0050.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz/
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "omap5-board-common.dtsi"
+
+/ {
+ model = "IGEPv5";
+ compatible = "isee,omap5-igep0050", "ti,omap5";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0 0x7f000000>; /* 2032 MB */
+ };
+
+ aliases {
+ ethernet = ðernet;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&power_button_pin>;
+ pinctrl-names = "default";
+
+ power-button {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led@1 {
+ label = "board:green:usr0";
+ gpios = <&tca6416 1 0>;
+ default-state = "off";
+ };
+ led@2 {
+ label = "board:red:usr1";
+ gpios = <&tca6416 2 0>;
+ default-state = "off";
+ };
+ led@3 {
+ label = "board:blue:usr1";
+ gpios = <&tca6416 3 0>;
+ default-state = "off";
+ };
+ };
+};
+
+&hdmi {
+ vdda-supply = <&ldo7_reg>;
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+
+ tca6416: tca6416@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+/* LDO4 is VPP1 - ball AD9 */
+&ldo4_reg {
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+};
+
+/*
+ * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33,
+ * VDDA_HDMI - ball AN25
+ */
+&ldo7_reg {
+ status = "okay";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&omap5_pmx_core {
+ i2c4_pins: i2c4-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* i2c4_scl */
+ OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0) /* i2c4_sda */
+ >;
+ };
+
+ power_button_pin: power-button-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x086, PIN_INPUT | MUX_MODE6) /* gpio4_118 */
+ >;
+ };
+};
+
+&tpd12s015 {
+ gpios = <&tca6416 11 0>, /* TCA6416 P01, CT_CP_HDP */
+ <&tca6416 12 0>, /* TCA6416 P00, LS_OE*/
+ <&gpio7 1 0>, /* 193, HPD */
+ <&gpio7 2 0>, /* 194, SCL */
+ <&gpio7 3 0>; /* 195, SDA */
+};
+
+&twl6040 {
+ ti,audpwron-gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio line 144 */
+};
+
+&twl6040_pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_144 */
+ OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */
+ >;
+};
+
+&usbhsehci {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub@2 {
+ compatible = "usb424,3503";
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet: ethernet@3 {
+ compatible = "usb424,7500";
+ reg = <3>;
+ };
+ };
+};
diff --git a/src/arm/ti/omap/omap5-l4-abe.dtsi b/src/arm/ti/omap/omap5-l4-abe.dtsi
new file mode 100644
index 0000000..97b0c3b
--- /dev/null
+++ b/src/arm/ti/omap/omap5-l4-abe.dtsi
@@ -0,0 +1,462 @@
+&l4_abe { /* 0x40100000 */
+ compatible = "ti,omap5-l4-abe", "simple-pm-bus";
+ reg = <0x40100000 0x400>,
+ <0x40100400 0x400>;
+ reg-names = "la", "ap";
+ power-domains = <&prm_abe>;
+ /* OMAP5_L4_ABE_CLKCTRL is read-only */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */
+ <0x49000000 0x49000000 0x100000>;
+ segment@0 { /* 0x40100000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges =
+ /* CPU to L4 ABE mapping */
+ <0x00000000 0x00000000 0x000400>, /* ap 0 */
+ <0x00000400 0x00000400 0x000400>, /* ap 1 */
+ <0x00022000 0x00022000 0x001000>, /* ap 2 */
+ <0x00023000 0x00023000 0x001000>, /* ap 3 */
+ <0x00024000 0x00024000 0x001000>, /* ap 4 */
+ <0x00025000 0x00025000 0x001000>, /* ap 5 */
+ <0x00026000 0x00026000 0x001000>, /* ap 6 */
+ <0x00027000 0x00027000 0x001000>, /* ap 7 */
+ <0x00028000 0x00028000 0x001000>, /* ap 8 */
+ <0x00029000 0x00029000 0x001000>, /* ap 9 */
+ <0x0002a000 0x0002a000 0x001000>, /* ap 10 */
+ <0x0002b000 0x0002b000 0x001000>, /* ap 11 */
+ <0x0002e000 0x0002e000 0x001000>, /* ap 12 */
+ <0x0002f000 0x0002f000 0x001000>, /* ap 13 */
+ <0x00030000 0x00030000 0x001000>, /* ap 14 */
+ <0x00031000 0x00031000 0x001000>, /* ap 15 */
+ <0x00032000 0x00032000 0x001000>, /* ap 16 */
+ <0x00033000 0x00033000 0x001000>, /* ap 17 */
+ <0x00038000 0x00038000 0x001000>, /* ap 18 */
+ <0x00039000 0x00039000 0x001000>, /* ap 19 */
+ <0x0003a000 0x0003a000 0x001000>, /* ap 20 */
+ <0x0003b000 0x0003b000 0x001000>, /* ap 21 */
+ <0x0003c000 0x0003c000 0x001000>, /* ap 22 */
+ <0x0003d000 0x0003d000 0x001000>, /* ap 23 */
+ <0x0003e000 0x0003e000 0x001000>, /* ap 24 */
+ <0x0003f000 0x0003f000 0x001000>, /* ap 25 */
+ <0x00080000 0x00080000 0x010000>, /* ap 26 */
+ <0x00080000 0x00080000 0x001000>, /* ap 27 */
+ <0x000a0000 0x000a0000 0x010000>, /* ap 28 */
+ <0x000a0000 0x000a0000 0x001000>, /* ap 29 */
+ <0x000c0000 0x000c0000 0x010000>, /* ap 30 */
+ <0x000c0000 0x000c0000 0x001000>, /* ap 31 */
+ <0x000f1000 0x000f1000 0x001000>, /* ap 32 */
+ <0x000f2000 0x000f2000 0x001000>, /* ap 33 */
+
+ /* L3 to L4 ABE mapping */
+ <0x49000000 0x49000000 0x000400>, /* ap 0 */
+ <0x49000400 0x49000400 0x000400>, /* ap 1 */
+ <0x49022000 0x49022000 0x001000>, /* ap 2 */
+ <0x49023000 0x49023000 0x001000>, /* ap 3 */
+ <0x49024000 0x49024000 0x001000>, /* ap 4 */
+ <0x49025000 0x49025000 0x001000>, /* ap 5 */
+ <0x49026000 0x49026000 0x001000>, /* ap 6 */
+ <0x49027000 0x49027000 0x001000>, /* ap 7 */
+ <0x49028000 0x49028000 0x001000>, /* ap 8 */
+ <0x49029000 0x49029000 0x001000>, /* ap 9 */
+ <0x4902a000 0x4902a000 0x001000>, /* ap 10 */
+ <0x4902b000 0x4902b000 0x001000>, /* ap 11 */
+ <0x4902e000 0x4902e000 0x001000>, /* ap 12 */
+ <0x4902f000 0x4902f000 0x001000>, /* ap 13 */
+ <0x49030000 0x49030000 0x001000>, /* ap 14 */
+ <0x49031000 0x49031000 0x001000>, /* ap 15 */
+ <0x49032000 0x49032000 0x001000>, /* ap 16 */
+ <0x49033000 0x49033000 0x001000>, /* ap 17 */
+ <0x49038000 0x49038000 0x001000>, /* ap 18 */
+ <0x49039000 0x49039000 0x001000>, /* ap 19 */
+ <0x4903a000 0x4903a000 0x001000>, /* ap 20 */
+ <0x4903b000 0x4903b000 0x001000>, /* ap 21 */
+ <0x4903c000 0x4903c000 0x001000>, /* ap 22 */
+ <0x4903d000 0x4903d000 0x001000>, /* ap 23 */
+ <0x4903e000 0x4903e000 0x001000>, /* ap 24 */
+ <0x4903f000 0x4903f000 0x001000>, /* ap 25 */
+ <0x49080000 0x49080000 0x010000>, /* ap 26 */
+ <0x49080000 0x49080000 0x001000>, /* ap 27 */
+ <0x490a0000 0x490a0000 0x010000>, /* ap 28 */
+ <0x490a0000 0x490a0000 0x001000>, /* ap 29 */
+ <0x490c0000 0x490c0000 0x010000>, /* ap 30 */
+ <0x490c0000 0x490c0000 0x001000>, /* ap 31 */
+ <0x490f1000 0x490f1000 0x001000>, /* ap 32 */
+ <0x490f2000 0x490f2000 0x001000>; /* ap 33 */
+
+ target-module@22000 { /* 0x40122000, ap 2 02.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x2208c 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_MCBSP1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x22000 0x1000>,
+ <0x49022000 0x49022000 0x1000>;
+
+ mcbsp1: mcbsp@0 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x0 0xff>, /* MPU private access */
+ <0x49022000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ clocks = <&abe_clkctrl OMAP5_MCBSP1_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "common";
+ ti,buffer-size = <128>;
+ dmas = <&sdma 33>,
+ <&sdma 34>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ target-module@24000 { /* 0x40124000, ap 4 04.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x2408c 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_MCBSP2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x24000 0x1000>,
+ <0x49024000 0x49024000 0x1000>;
+
+ mcbsp2: mcbsp@0 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x0 0xff>, /* MPU private access */
+ <0x49024000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ clocks = <&abe_clkctrl OMAP5_MCBSP2_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "common";
+ ti,buffer-size = <128>;
+ dmas = <&sdma 17>,
+ <&sdma 18>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ target-module@26000 { /* 0x40126000, ap 6 06.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x2608c 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_MCBSP3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x1000>,
+ <0x49026000 0x49026000 0x1000>;
+
+ mcbsp3: mcbsp@0 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x0 0xff>, /* MPU private access */
+ <0x49026000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ clocks = <&abe_clkctrl OMAP5_MCBSP3_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "common";
+ ti,buffer-size = <128>;
+ dmas = <&sdma 19>,
+ <&sdma 20>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ target-module@28000 { /* 0x40128000, ap 8 08.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x28000 0x1000>,
+ <0x49028000 0x49028000 0x1000>;
+ };
+
+ target-module@2a000 { /* 0x4012a000, ap 10 0a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2a000 0x1000>,
+ <0x4902a000 0x4902a000 0x1000>;
+ };
+
+ target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x2e000 0x4>,
+ <0x2e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_DMIC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2e000 0x1000>,
+ <0x4902e000 0x4902e000 0x1000>;
+
+ dmic: dmic@0 {
+ compatible = "ti,omap4-dmic";
+ reg = <0x0 0x7f>, /* MPU private access */
+ <0x4902e000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 67>;
+ dma-names = "up_link";
+ status = "disabled";
+ };
+ };
+
+ target-module@30000 { /* 0x40130000, ap 14 0e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x30000 0x1000>,
+ <0x49030000 0x49030000 0x1000>;
+ };
+
+ mcpdm_module: target-module@32000 { /* 0x40132000, ap 16 10.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x32000 0x4>,
+ <0x32010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_MCPDM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x32000 0x1000>,
+ <0x49032000 0x49032000 0x1000>;
+
+ /* Must be only enabled for boards with pdmclk wired */
+ status = "disabled";
+
+ mcpdm: mcpdm@0 {
+ compatible = "ti,omap4-mcpdm";
+ reg = <0x0 0x7f>, /* MPU private access */
+ <0x49032000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 65>,
+ <&sdma 66>;
+ dma-names = "up_link", "dn_link";
+ };
+ };
+
+ target-module@38000 { /* 0x40138000, ap 18 12.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x38000 0x4>,
+ <0x38010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x38000 0x1000>,
+ <0x49038000 0x49038000 0x1000>;
+
+ timer5: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>,
+ <0x49038000 0x80>;
+ clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 24>,
+ <&dss_syc_gfclk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-dsp;
+ ti,timer-pwm;
+ };
+ };
+
+ target-module@3a000 { /* 0x4013a000, ap 20 14.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x3a000 0x4>,
+ <0x3a010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3a000 0x1000>,
+ <0x4903a000 0x4903a000 0x1000>;
+
+ timer6: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>,
+ <0x4903a000 0x80>;
+ clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 24>,
+ <&dss_syc_gfclk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-dsp;
+ ti,timer-pwm;
+ };
+ };
+
+ target-module@3c000 { /* 0x4013c000, ap 22 16.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x3c000 0x4>,
+ <0x3c010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3c000 0x1000>,
+ <0x4903c000 0x4903c000 0x1000>;
+
+ timer7: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>,
+ <0x4903c000 0x80>;
+ clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 24>,
+ <&dss_syc_gfclk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-dsp;
+ };
+ };
+
+ target-module@3e000 { /* 0x4013e000, ap 24 18.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x3e000 0x4>,
+ <0x3e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3e000 0x1000>,
+ <0x4903e000 0x4903e000 0x1000>;
+
+ timer8: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>,
+ <0x4903e000 0x80>;
+ clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 24>,
+ <&dss_syc_gfclk_div>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-dsp;
+ ti,timer-pwm;
+ };
+ };
+
+ target-module@80000 { /* 0x40180000, ap 26 1a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000 0x10000>,
+ <0x49080000 0x49080000 0x10000>;
+ };
+
+ target-module@a0000 { /* 0x401a0000, ap 28 1c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa0000 0x10000>,
+ <0x490a0000 0x490a0000 0x10000>;
+ };
+
+ target-module@c0000 { /* 0x401c0000, ap 30 1e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc0000 0x10000>,
+ <0x490c0000 0x490c0000 0x10000>;
+ };
+
+ target-module@f1000 { /* 0x401f1000, ap 32 20.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xf1000 0x4>,
+ <0xf1010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP5_AESS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf1000 0x1000>,
+ <0x490f1000 0x490f1000 0x1000>;
+ };
+ };
+};
+
diff --git a/src/arm/ti/omap/omap5-l4.dtsi b/src/arm/ti/omap/omap5-l4.dtsi
new file mode 100644
index 0000000..3b505fe
--- /dev/null
+++ b/src/arm/ti/omap/omap5-l4.dtsi
@@ -0,0 +1,2502 @@
+&l4_cfg { /* 0x4a000000 */
+ compatible = "ti,omap5-l4-cfg", "simple-pm-bus";
+ power-domains = <&prm_core>;
+ clocks = <&l4cfg_clkctrl OMAP5_L4_CFG_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x4a000000 0x800>,
+ <0x4a000800 0x800>,
+ <0x4a001000 0x1000>;
+ reg-names = "ap", "la", "ia0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4a000000 0x080000>, /* segment 0 */
+ <0x00080000 0x4a080000 0x080000>, /* segment 1 */
+ <0x00100000 0x4a100000 0x080000>, /* segment 2 */
+ <0x00180000 0x4a180000 0x080000>, /* segment 3 */
+ <0x00200000 0x4a200000 0x080000>, /* segment 4 */
+ <0x00280000 0x4a280000 0x080000>, /* segment 5 */
+ <0x00300000 0x4a300000 0x080000>; /* segment 6 */
+
+ segment@0 { /* 0x4a000000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00001000 0x00001000 0x001000>, /* ap 1 */
+ <0x00000800 0x00000800 0x000800>, /* ap 2 */
+ <0x00002000 0x00002000 0x001000>, /* ap 3 */
+ <0x00003000 0x00003000 0x001000>, /* ap 4 */
+ <0x00004000 0x00004000 0x001000>, /* ap 5 */
+ <0x00005000 0x00005000 0x001000>, /* ap 6 */
+ <0x00056000 0x00056000 0x001000>, /* ap 7 */
+ <0x00057000 0x00057000 0x001000>, /* ap 8 */
+ <0x0005c000 0x0005c000 0x001000>, /* ap 9 */
+ <0x00058000 0x00058000 0x001000>, /* ap 10 */
+ <0x00062000 0x00062000 0x001000>, /* ap 11 */
+ <0x00063000 0x00063000 0x001000>, /* ap 12 */
+ <0x00008000 0x00008000 0x002000>, /* ap 21 */
+ <0x0000a000 0x0000a000 0x001000>, /* ap 22 */
+ <0x00066000 0x00066000 0x001000>, /* ap 23 */
+ <0x00067000 0x00067000 0x001000>, /* ap 24 */
+ <0x0005e000 0x0005e000 0x002000>, /* ap 69 */
+ <0x00060000 0x00060000 0x001000>, /* ap 70 */
+ <0x00064000 0x00064000 0x001000>, /* ap 71 */
+ <0x00065000 0x00065000 0x001000>, /* ap 72 */
+ <0x0005a000 0x0005a000 0x001000>, /* ap 77 */
+ <0x0005b000 0x0005b000 0x001000>, /* ap 78 */
+ <0x00070000 0x00070000 0x004000>, /* ap 79 */
+ <0x00074000 0x00074000 0x001000>, /* ap 80 */
+ <0x00075000 0x00075000 0x001000>, /* ap 81 */
+ <0x00076000 0x00076000 0x001000>, /* ap 82 */
+ <0x00020000 0x00020000 0x020000>, /* ap 109 */
+ <0x00040000 0x00040000 0x001000>, /* ap 110 */
+ <0x00059000 0x00059000 0x001000>; /* ap 111 */
+
+ target-module@2000 { /* 0x4a002000, ap 3 44.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x2000 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2000 0x1000>;
+
+ scm_core: scm@0 {
+ compatible = "ti,omap5-scm-core", "simple-bus";
+ reg = <0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x800>;
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+
+ scm_padconf_core: scm@800 {
+ compatible = "ti,omap5-scm-padconf-core",
+ "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x800 0x800>;
+
+ omap5_pmx_core: pinmux@40 {
+ compatible = "ti,omap5-padconf",
+ "pinctrl-single";
+ reg = <0x40 0x01b6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+
+ omap5_padconf_global: omap5_padconf_global@5a0 {
+ compatible = "syscon",
+ "simple-bus";
+ reg = <0x5a0 0xec>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5a0 0xec>;
+
+ pbias_regulator: pbias_regulator@60 {
+ compatible = "ti,pbias-omap5", "ti,pbias-omap";
+ reg = <0x60 0x4>;
+ syscon = <&omap5_padconf_global>;
+ pbias_mmc_reg: pbias_mmc_omap5 {
+ regulator-name = "pbias_mmc_omap5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+ };
+ };
+
+ target-module@4000 { /* 0x4a004000, ap 5 5c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x4000 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+
+ cm_core_aon: cm_core_aon@0 {
+ compatible = "ti,omap5-cm-core-aon",
+ "simple-bus";
+ reg = <0x0 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000>;
+
+ cm_core_aon_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_core_aon_clockdomains: clockdomains {
+ };
+ };
+ };
+
+ target-module@8000 { /* 0x4a008000, ap 21 4c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x8000 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8000 0x2000>;
+
+ cm_core: cm_core@0 {
+ compatible = "ti,omap5-cm-core", "simple-bus";
+ reg = <0x0 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x2000>;
+
+ cm_core_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_core_clockdomains: clockdomains {
+ };
+ };
+ };
+
+ target-module@20000 { /* 0x4a020000, ap 109 08.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x20000 0x4>,
+ <0x20010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+ clocks = <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x20000 0x20000>;
+
+ usb3: omap_dwc3@0 {
+ compatible = "ti,dwc3";
+ reg = <0x0 0x10000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges = <0 0 0x20000>;
+ dwc3: usb@10000 {
+ compatible = "snps,dwc3";
+ reg = <0x10000 0x10000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
+ phys = <&usb2_phy>, <&usb3_phy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "peripheral";
+ };
+ };
+ };
+
+ target-module@56000 { /* 0x4a056000, ap 7 02.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x56000 0x4>,
+ <0x5602c 0x4>,
+ <0x56028 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, dma_clkdm */
+ clocks = <&dma_clkctrl OMAP5_DMA_SYSTEM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x56000 0x1000>;
+
+ sdma: dma-controller@0 {
+ compatible = "ti,omap4430-sdma", "ti,omap-sdma";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <32>;
+ dma-requests = <127>;
+ };
+ };
+
+ target-module@58000 { /* 0x4a058000, ap 10 06.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00058000 0x00001000>,
+ <0x00001000 0x00059000 0x00001000>,
+ <0x00002000 0x0005a000 0x00001000>,
+ <0x00003000 0x0005b000 0x00001000>;
+ };
+
+ target-module@5e000 { /* 0x4a05e000, ap 69 2a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5e000 0x2000>;
+ };
+
+ target-module@62000 { /* 0x4a062000, ap 11 0e.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x62000 0x4>,
+ <0x62010 0x4>,
+ <0x62014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+ clocks = <&l3init_clkctrl OMAP5_USB_TLL_HS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x62000 0x1000>;
+
+ usbhstll: usbhstll@0 {
+ compatible = "ti,usbhs-tll";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@64000 { /* 0x4a064000, ap 71 1e.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x64000 0x4>,
+ <0x64010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+ clocks = <&l3init_clkctrl OMAP5_USB_HOST_HS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x64000 0x1000>;
+
+ usbhshost: usbhshost@0 {
+ compatible = "ti,usbhs-host";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000>;
+ clocks = <&l3init_60m_fclk>,
+ <&xclk60mhsp1_ck>,
+ <&xclk60mhsp2_ck>;
+ clock-names = "refclk_60m_int",
+ "refclk_60m_ext_p1",
+ "refclk_60m_ext_p2";
+
+ usbhsohci: ohci@800 {
+ compatible = "ti,ohci-omap3";
+ reg = <0x800 0x400>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ remote-wakeup-connected;
+ };
+
+ usbhsehci: ehci@c00 {
+ compatible = "ti,ehci-omap";
+ reg = <0xc00 0x400>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+
+ target-module@66000 { /* 0x4a066000, ap 23 0a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x66000 0x4>,
+ <0x66010 0x4>,
+ <0x66014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */
+ clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp 1>;
+ reset-names = "rstctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x66000 0x1000>;
+
+ mmu_dsp: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ };
+ };
+
+ target-module@70000 { /* 0x4a070000, ap 79 2e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x70000 0x4000>;
+ };
+
+ target-module@75000 { /* 0x4a075000, ap 81 32.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x75000 0x1000>;
+ };
+ };
+
+ segment@80000 { /* 0x4a080000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */
+ <0x0005a000 0x000da000 0x001000>, /* ap 14 */
+ <0x0005b000 0x000db000 0x001000>, /* ap 15 */
+ <0x0005c000 0x000dc000 0x001000>, /* ap 16 */
+ <0x0005d000 0x000dd000 0x001000>, /* ap 17 */
+ <0x0005e000 0x000de000 0x001000>, /* ap 18 */
+ <0x00060000 0x000e0000 0x001000>, /* ap 19 */
+ <0x00061000 0x000e1000 0x001000>, /* ap 20 */
+ <0x00074000 0x000f4000 0x001000>, /* ap 25 */
+ <0x00075000 0x000f5000 0x001000>, /* ap 26 */
+ <0x00076000 0x000f6000 0x001000>, /* ap 27 */
+ <0x00077000 0x000f7000 0x001000>, /* ap 28 */
+ <0x00036000 0x000b6000 0x001000>, /* ap 65 */
+ <0x00037000 0x000b7000 0x001000>, /* ap 66 */
+ <0x0004d000 0x000cd000 0x001000>, /* ap 67 */
+ <0x0004e000 0x000ce000 0x001000>, /* ap 68 */
+ <0x00000000 0x00080000 0x004000>, /* ap 83 */
+ <0x00004000 0x00084000 0x001000>, /* ap 84 */
+ <0x00005000 0x00085000 0x001000>, /* ap 85 */
+ <0x00006000 0x00086000 0x001000>, /* ap 86 */
+ <0x00007000 0x00087000 0x001000>, /* ap 87 */
+ <0x00008000 0x00088000 0x001000>, /* ap 88 */
+ <0x00010000 0x00090000 0x004000>, /* ap 89 */
+ <0x00014000 0x00094000 0x001000>, /* ap 90 */
+ <0x00015000 0x00095000 0x001000>, /* ap 91 */
+ <0x00016000 0x00096000 0x001000>, /* ap 92 */
+ <0x00017000 0x00097000 0x001000>, /* ap 93 */
+ <0x00018000 0x00098000 0x001000>, /* ap 94 */
+ <0x00020000 0x000a0000 0x004000>, /* ap 95 */
+ <0x00024000 0x000a4000 0x001000>, /* ap 96 */
+ <0x00025000 0x000a5000 0x001000>, /* ap 97 */
+ <0x00026000 0x000a6000 0x001000>, /* ap 98 */
+ <0x00027000 0x000a7000 0x001000>, /* ap 99 */
+ <0x00028000 0x000a8000 0x001000>; /* ap 100 */
+
+ target-module@0 { /* 0x4a080000, ap 83 28.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x0 0x4>,
+ <0x10 0x4>,
+ <0x14 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+ clocks = <&l3init_clkctrl OMAP5_OCP2SCP1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x00004000>,
+ <0x00004000 0x00004000 0x00001000>,
+ <0x00005000 0x00005000 0x00001000>,
+ <0x00006000 0x00006000 0x00001000>,
+ <0x00007000 0x00007000 0x00001000>;
+
+ ocp2scp@0 {
+ compatible = "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0x20>;
+ };
+
+ usb2_phy: usb2phy@4000 {
+ compatible = "ti,omap-usb2";
+ reg = <0x4000 0x7c>;
+ syscon-phy-power = <&scm_conf 0x300>;
+ clocks = <&usb_phy_cm_clk32k>,
+ <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
+ clock-names = "wkupclk", "refclk";
+ #phy-cells = <0>;
+ };
+
+ usb3_phy: usb3phy@4400 {
+ compatible = "ti,omap-usb3";
+ reg = <0x4400 0x80>,
+ <0x4800 0x64>,
+ <0x4c00 0x40>;
+ reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+ syscon-phy-power = <&scm_conf 0x370>;
+ clocks = <&usb_phy_cm_clk32k>,
+ <&sys_clkin>,
+ <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
+ clock-names = "wkupclk",
+ "sysclk",
+ "refclk";
+ #phy-cells = <0>;
+ };
+ };
+
+ target-module@10000 { /* 0x4a090000, ap 89 36.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x10000 0x4>,
+ <0x10010 0x4>,
+ <0x10014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+ clocks = <&l3init_clkctrl OMAP5_OCP2SCP3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00010000 0x00004000>,
+ <0x00004000 0x00014000 0x00001000>,
+ <0x00005000 0x00015000 0x00001000>,
+ <0x00006000 0x00016000 0x00001000>,
+ <0x00007000 0x00017000 0x00001000>;
+
+ ocp2scp@0 {
+ compatible = "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0 0x20>;
+ };
+
+ sata_phy: phy@6000 {
+ compatible = "ti,phy-pipe3-sata";
+ reg = <0x6000 0x80>, /* phy_rx */
+ <0x6400 0x64>, /* phy_tx */
+ <0x6800 0x40>; /* pll_ctrl */
+ reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+ syscon-phy-power = <&scm_conf 0x374>;
+ clocks = <&sys_clkin>,
+ <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
+ clock-names = "sysclk", "refclk";
+ #phy-cells = <0>;
+ };
+ };
+
+ target-module@20000 { /* 0x4a0a0000, ap 95 50.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00020000 0x00004000>,
+ <0x00004000 0x00024000 0x00001000>,
+ <0x00005000 0x00025000 0x00001000>,
+ <0x00006000 0x00026000 0x00001000>,
+ <0x00007000 0x00027000 0x00001000>;
+ };
+
+ target-module@36000 { /* 0x4a0b6000, ap 65 6c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x36000 0x1000>;
+ };
+
+ target-module@4d000 { /* 0x4a0cd000, ap 67 64.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4d000 0x1000>;
+ };
+
+ target-module@59000 { /* 0x4a0d9000, ap 13 20.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x59000 0x1000>;
+ };
+
+ target-module@5b000 { /* 0x4a0db000, ap 15 10.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5b000 0x1000>;
+ };
+
+ target-module@5d000 { /* 0x4a0dd000, ap 17 18.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5d000 0x1000>;
+ };
+
+ target-module@60000 { /* 0x4a0e0000, ap 19 54.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x60000 0x1000>;
+ };
+
+ target-module@74000 { /* 0x4a0f4000, ap 25 04.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x74000 0x4>,
+ <0x74010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */
+ clocks = <&l4cfg_clkctrl OMAP5_MAILBOX_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x74000 0x1000>;
+
+ mailbox: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <3>;
+ ti,mbox-num-fifos = <8>;
+ mbox_ipu: mbox-ipu {
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <1 0 0>;
+ };
+ mbox_dsp: mbox-dsp {
+ ti,mbox-tx = <3 0 0>;
+ ti,mbox-rx = <2 0 0>;
+ };
+ };
+ };
+
+ target-module@76000 { /* 0x4a0f6000, ap 27 0c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x76000 0x4>,
+ <0x76010 0x4>,
+ <0x76014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */
+ clocks = <&l4cfg_clkctrl OMAP5_SPINLOCK_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x76000 0x1000>;
+
+ hwspinlock: spinlock@0 {
+ compatible = "ti,omap4-hwspinlock";
+ reg = <0x0 0x1000>;
+ #hwlock-cells = <1>;
+ };
+ };
+ };
+
+ segment@100000 { /* 0x4a100000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00002000 0x00102000 0x001000>, /* ap 59 */
+ <0x00003000 0x00103000 0x001000>, /* ap 60 */
+ <0x00008000 0x00108000 0x001000>, /* ap 61 */
+ <0x00009000 0x00109000 0x001000>, /* ap 62 */
+ <0x0000a000 0x0010a000 0x001000>, /* ap 63 */
+ <0x0000b000 0x0010b000 0x001000>, /* ap 64 */
+ <0x00040000 0x00140000 0x010000>, /* ap 101 */
+ <0x00050000 0x00150000 0x001000>; /* ap 102 */
+
+ target-module@2000 { /* 0x4a102000, ap 59 2c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2000 0x1000>;
+ };
+
+ target-module@8000 { /* 0x4a108000, ap 61 26.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8000 0x1000>;
+ };
+
+ target-module@a000 { /* 0x4a10a000, ap 63 22.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa000 0x1000>;
+ };
+
+ target-module@40000 { /* 0x4a140000, ap 101 16.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x400fc 4>,
+ <0x41100 4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ power-domains = <&prm_l3init>;
+ clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 0>;
+ clock-names = "fck";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0x0 0x40000 0x10000>;
+
+ sata: sata@0 {
+ compatible = "snps,dwc-ahci";
+ reg = <0 0x1100>, <0x1100 0x8>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+ clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
+ ports-implemented = <0x1>;
+ };
+ };
+ };
+
+ segment@180000 { /* 0x4a180000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ segment@200000 { /* 0x4a200000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 29 */
+ <0x0001f000 0x0021f000 0x001000>, /* ap 30 */
+ <0x0000a000 0x0020a000 0x001000>, /* ap 31 */
+ <0x0000b000 0x0020b000 0x001000>, /* ap 32 */
+ <0x00006000 0x00206000 0x001000>, /* ap 33 */
+ <0x00007000 0x00207000 0x001000>, /* ap 34 */
+ <0x00004000 0x00204000 0x001000>, /* ap 35 */
+ <0x00005000 0x00205000 0x001000>, /* ap 36 */
+ <0x00012000 0x00212000 0x001000>, /* ap 37 */
+ <0x00013000 0x00213000 0x001000>, /* ap 38 */
+ <0x0000c000 0x0020c000 0x001000>, /* ap 39 */
+ <0x0000d000 0x0020d000 0x001000>, /* ap 40 */
+ <0x00010000 0x00210000 0x001000>, /* ap 41 */
+ <0x00011000 0x00211000 0x001000>, /* ap 42 */
+ <0x00016000 0x00216000 0x001000>, /* ap 43 */
+ <0x00017000 0x00217000 0x001000>, /* ap 44 */
+ <0x00014000 0x00214000 0x001000>, /* ap 45 */
+ <0x00015000 0x00215000 0x001000>, /* ap 46 */
+ <0x00018000 0x00218000 0x001000>, /* ap 47 */
+ <0x00019000 0x00219000 0x001000>, /* ap 48 */
+ <0x00020000 0x00220000 0x001000>, /* ap 49 */
+ <0x00021000 0x00221000 0x001000>, /* ap 50 */
+ <0x00026000 0x00226000 0x001000>, /* ap 51 */
+ <0x00027000 0x00227000 0x001000>, /* ap 52 */
+ <0x00028000 0x00228000 0x001000>, /* ap 53 */
+ <0x00029000 0x00229000 0x001000>, /* ap 54 */
+ <0x0002a000 0x0022a000 0x001000>, /* ap 55 */
+ <0x0002b000 0x0022b000 0x001000>, /* ap 56 */
+ <0x0001c000 0x0021c000 0x001000>, /* ap 57 */
+ <0x0001d000 0x0021d000 0x001000>, /* ap 58 */
+ <0x0001a000 0x0021a000 0x001000>, /* ap 73 */
+ <0x0001b000 0x0021b000 0x001000>, /* ap 74 */
+ <0x00024000 0x00224000 0x001000>, /* ap 75 */
+ <0x00025000 0x00225000 0x001000>, /* ap 76 */
+ <0x00002000 0x00202000 0x001000>, /* ap 103 */
+ <0x00003000 0x00203000 0x001000>, /* ap 104 */
+ <0x00008000 0x00208000 0x001000>, /* ap 105 */
+ <0x00009000 0x00209000 0x001000>, /* ap 106 */
+ <0x00022000 0x00222000 0x001000>, /* ap 107 */
+ <0x00023000 0x00223000 0x001000>; /* ap 108 */
+
+ target-module@2000 { /* 0x4a202000, ap 103 3c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2000 0x1000>;
+ };
+
+ target-module@4000 { /* 0x4a204000, ap 35 46.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+ };
+
+ target-module@6000 { /* 0x4a206000, ap 33 4e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6000 0x1000>;
+ };
+
+ target-module@8000 { /* 0x4a208000, ap 105 34.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8000 0x1000>;
+ };
+
+ target-module@a000 { /* 0x4a20a000, ap 31 30.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa000 0x1000>;
+ };
+
+ target-module@c000 { /* 0x4a20c000, ap 39 14.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc000 0x1000>;
+ };
+
+ target-module@10000 { /* 0x4a210000, ap 41 56.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000 0x1000>;
+ };
+
+ target-module@12000 { /* 0x4a212000, ap 37 52.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x12000 0x1000>;
+ };
+
+ target-module@14000 { /* 0x4a214000, ap 45 1c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x14000 0x1000>;
+ };
+
+ target-module@16000 { /* 0x4a216000, ap 43 42.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x16000 0x1000>;
+ };
+
+ target-module@18000 { /* 0x4a218000, ap 47 1a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x18000 0x1000>;
+ };
+
+ target-module@1a000 { /* 0x4a21a000, ap 73 3e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1a000 0x1000>;
+ };
+
+ target-module@1c000 { /* 0x4a21c000, ap 57 40.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1c000 0x1000>;
+ };
+
+ target-module@1e000 { /* 0x4a21e000, ap 29 12.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e000 0x1000>;
+ };
+
+ target-module@20000 { /* 0x4a220000, ap 49 4a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x20000 0x1000>;
+ };
+
+ target-module@22000 { /* 0x4a222000, ap 107 3a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x22000 0x1000>;
+ };
+
+ target-module@24000 { /* 0x4a224000, ap 75 48.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x24000 0x1000>;
+ };
+
+ target-module@26000 { /* 0x4a226000, ap 51 24.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x1000>;
+ };
+
+ target-module@28000 { /* 0x4a228000, ap 53 38.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x28000 0x1000>;
+ };
+
+ target-module@2a000 { /* 0x4a22a000, ap 55 5a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2a000 0x1000>;
+ };
+ };
+
+ segment@280000 { /* 0x4a280000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ segment@300000 { /* 0x4a300000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&l4_per { /* 0x48000000 */
+ compatible = "ti,omap5-l4-per", "simple-pm-bus";
+ power-domains = <&prm_core>;
+ clocks = <&l4per_clkctrl OMAP5_L4_PER_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x48000000 0x800>,
+ <0x48000800 0x800>,
+ <0x48001000 0x400>,
+ <0x48001400 0x400>,
+ <0x48001800 0x400>,
+ <0x48001c00 0x400>;
+ reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */
+ <0x00200000 0x48200000 0x200000>; /* segment 1 */
+
+ segment@0 { /* 0x48000000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00001000 0x00001000 0x000400>, /* ap 1 */
+ <0x00000800 0x00000800 0x000800>, /* ap 2 */
+ <0x00020000 0x00020000 0x001000>, /* ap 3 */
+ <0x00021000 0x00021000 0x001000>, /* ap 4 */
+ <0x00032000 0x00032000 0x001000>, /* ap 5 */
+ <0x00033000 0x00033000 0x001000>, /* ap 6 */
+ <0x00034000 0x00034000 0x001000>, /* ap 7 */
+ <0x00035000 0x00035000 0x001000>, /* ap 8 */
+ <0x00036000 0x00036000 0x001000>, /* ap 9 */
+ <0x00037000 0x00037000 0x001000>, /* ap 10 */
+ <0x0003e000 0x0003e000 0x001000>, /* ap 11 */
+ <0x0003f000 0x0003f000 0x001000>, /* ap 12 */
+ <0x00055000 0x00055000 0x001000>, /* ap 13 */
+ <0x00056000 0x00056000 0x001000>, /* ap 14 */
+ <0x00057000 0x00057000 0x001000>, /* ap 15 */
+ <0x00058000 0x00058000 0x001000>, /* ap 16 */
+ <0x00059000 0x00059000 0x001000>, /* ap 17 */
+ <0x0005a000 0x0005a000 0x001000>, /* ap 18 */
+ <0x0005b000 0x0005b000 0x001000>, /* ap 19 */
+ <0x0005c000 0x0005c000 0x001000>, /* ap 20 */
+ <0x0005d000 0x0005d000 0x001000>, /* ap 21 */
+ <0x0005e000 0x0005e000 0x001000>, /* ap 22 */
+ <0x00060000 0x00060000 0x001000>, /* ap 23 */
+ <0x0006a000 0x0006a000 0x001000>, /* ap 24 */
+ <0x0006b000 0x0006b000 0x001000>, /* ap 25 */
+ <0x0006c000 0x0006c000 0x001000>, /* ap 26 */
+ <0x0006d000 0x0006d000 0x001000>, /* ap 27 */
+ <0x0006e000 0x0006e000 0x001000>, /* ap 28 */
+ <0x0006f000 0x0006f000 0x001000>, /* ap 29 */
+ <0x00070000 0x00070000 0x001000>, /* ap 30 */
+ <0x00071000 0x00071000 0x001000>, /* ap 31 */
+ <0x00072000 0x00072000 0x001000>, /* ap 32 */
+ <0x00073000 0x00073000 0x001000>, /* ap 33 */
+ <0x00061000 0x00061000 0x001000>, /* ap 34 */
+ <0x00053000 0x00053000 0x001000>, /* ap 35 */
+ <0x00054000 0x00054000 0x001000>, /* ap 36 */
+ <0x000b2000 0x000b2000 0x001000>, /* ap 37 */
+ <0x000b3000 0x000b3000 0x001000>, /* ap 38 */
+ <0x00078000 0x00078000 0x001000>, /* ap 39 */
+ <0x00079000 0x00079000 0x001000>, /* ap 40 */
+ <0x00086000 0x00086000 0x001000>, /* ap 41 */
+ <0x00087000 0x00087000 0x001000>, /* ap 42 */
+ <0x00088000 0x00088000 0x001000>, /* ap 43 */
+ <0x00089000 0x00089000 0x001000>, /* ap 44 */
+ <0x00051000 0x00051000 0x001000>, /* ap 45 */
+ <0x00052000 0x00052000 0x001000>, /* ap 46 */
+ <0x00098000 0x00098000 0x001000>, /* ap 47 */
+ <0x00099000 0x00099000 0x001000>, /* ap 48 */
+ <0x0009a000 0x0009a000 0x001000>, /* ap 49 */
+ <0x0009b000 0x0009b000 0x001000>, /* ap 50 */
+ <0x0009c000 0x0009c000 0x001000>, /* ap 51 */
+ <0x0009d000 0x0009d000 0x001000>, /* ap 52 */
+ <0x00068000 0x00068000 0x001000>, /* ap 53 */
+ <0x00069000 0x00069000 0x001000>, /* ap 54 */
+ <0x00090000 0x00090000 0x002000>, /* ap 55 */
+ <0x00092000 0x00092000 0x001000>, /* ap 56 */
+ <0x000a4000 0x000a4000 0x001000>, /* ap 57 */
+ <0x000a5000 0x000a5000 0x001000>,
+ <0x000a6000 0x000a6000 0x001000>, /* ap 58 */
+ <0x000a8000 0x000a8000 0x004000>, /* ap 59 */
+ <0x000ac000 0x000ac000 0x001000>, /* ap 60 */
+ <0x000ad000 0x000ad000 0x001000>, /* ap 61 */
+ <0x000ae000 0x000ae000 0x001000>, /* ap 62 */
+ <0x00066000 0x00066000 0x001000>, /* ap 63 */
+ <0x00067000 0x00067000 0x001000>, /* ap 64 */
+ <0x000b4000 0x000b4000 0x001000>, /* ap 65 */
+ <0x000b5000 0x000b5000 0x001000>, /* ap 66 */
+ <0x000b8000 0x000b8000 0x001000>, /* ap 67 */
+ <0x000b9000 0x000b9000 0x001000>, /* ap 68 */
+ <0x000ba000 0x000ba000 0x001000>, /* ap 69 */
+ <0x000bb000 0x000bb000 0x001000>, /* ap 70 */
+ <0x000d1000 0x000d1000 0x001000>, /* ap 71 */
+ <0x000d2000 0x000d2000 0x001000>, /* ap 72 */
+ <0x000d5000 0x000d5000 0x001000>, /* ap 73 */
+ <0x000d6000 0x000d6000 0x001000>, /* ap 74 */
+ <0x000a2000 0x000a2000 0x001000>, /* ap 75 */
+ <0x000a3000 0x000a3000 0x001000>, /* ap 76 */
+ <0x00001400 0x00001400 0x000400>, /* ap 77 */
+ <0x00001800 0x00001800 0x000400>, /* ap 78 */
+ <0x00001c00 0x00001c00 0x000400>, /* ap 79 */
+ <0x000a5000 0x000a5000 0x001000>, /* ap 80 */
+ <0x0007a000 0x0007a000 0x001000>, /* ap 81 */
+ <0x0007b000 0x0007b000 0x001000>, /* ap 82 */
+ <0x0007c000 0x0007c000 0x001000>, /* ap 83 */
+ <0x0007d000 0x0007d000 0x001000>; /* ap 84 */
+
+ target-module@20000 { /* 0x48020000, ap 3 04.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x20050 0x4>,
+ <0x20054 0x4>,
+ <0x20058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_UART3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x20000 0x1000>;
+
+ uart3: serial@0 {
+ compatible = "ti,omap4-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ };
+ };
+
+ target-module@32000 { /* 0x48032000, ap 5 3e.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x32000 0x4>,
+ <0x32010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x32000 0x1000>;
+
+ timer2: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 24>,
+ <&sys_clkin>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@34000 { /* 0x48034000, ap 7 46.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x34000 0x4>,
+ <0x34010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x34000 0x1000>;
+
+ timer3: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 24>,
+ <&sys_clkin>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@36000 { /* 0x48036000, ap 9 4e.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x36000 0x4>,
+ <0x36010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x36000 0x1000>;
+
+ timer4: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 24>,
+ <&sys_clkin>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@3e000 { /* 0x4803e000, ap 11 56.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x3e000 0x4>,
+ <0x3e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3e000 0x1000>;
+
+ timer9: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 24>,
+ <&sys_clkin>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ };
+ };
+
+ target-module@51000 { /* 0x48051000, ap 45 2e.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x51000 0x4>,
+ <0x51010 0x4>,
+ <0x51114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 0>,
+ <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x51000 0x1000>;
+
+ gpio7: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@53000 { /* 0x48053000, ap 35 36.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x53000 0x4>,
+ <0x53010 0x4>,
+ <0x53114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 0>,
+ <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x53000 0x1000>;
+
+ gpio8: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@55000 { /* 0x48055000, ap 13 0e.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55000 0x4>,
+ <0x55010 0x4>,
+ <0x55114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 0>,
+ <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x55000 0x1000>;
+
+ gpio2: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@57000 { /* 0x48057000, ap 15 06.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x57000 0x4>,
+ <0x57010 0x4>,
+ <0x57114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 0>,
+ <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x57000 0x1000>;
+
+ gpio3: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@59000 { /* 0x48059000, ap 17 16.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x59000 0x4>,
+ <0x59010 0x4>,
+ <0x59114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 0>,
+ <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x59000 0x1000>;
+
+ gpio4: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@5b000 { /* 0x4805b000, ap 19 1e.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x5b000 0x4>,
+ <0x5b010 0x4>,
+ <0x5b114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 0>,
+ <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5b000 0x1000>;
+
+ gpio5: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@5d000 { /* 0x4805d000, ap 21 26.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x5d000 0x4>,
+ <0x5d010 0x4>,
+ <0x5d114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 0>,
+ <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5d000 0x1000>;
+
+ gpio6: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@60000 { /* 0x48060000, ap 23 24.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x60000 0x8>,
+ <0x60010 0x8>,
+ <0x60090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_I2C3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x60000 0x1000>;
+
+ i2c3: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ target-module@66000 { /* 0x48066000, ap 63 4c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x66050 0x4>,
+ <0x66054 0x4>,
+ <0x66058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_UART5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x66000 0x1000>;
+
+ uart5: serial@0 {
+ compatible = "ti,omap4-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ };
+ };
+
+ target-module@68000 { /* 0x48068000, ap 53 54.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x68050 0x4>,
+ <0x68054 0x4>,
+ <0x68058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_UART6_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x68000 0x1000>;
+
+ uart6: serial@0 {
+ compatible = "ti,omap4-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ };
+ };
+
+ target-module@6a000 { /* 0x4806a000, ap 24 0a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x6a050 0x4>,
+ <0x6a054 0x4>,
+ <0x6a058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_UART1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6a000 0x1000>;
+
+ uart1: serial@0 {
+ compatible = "ti,omap4-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ };
+ };
+
+ target-module@6c000 { /* 0x4806c000, ap 26 22.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x6c050 0x4>,
+ <0x6c054 0x4>,
+ <0x6c058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_UART2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6c000 0x1000>;
+
+ uart2: serial@0 {
+ compatible = "ti,omap4-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ };
+ };
+
+ target-module@6e000 { /* 0x4806e000, ap 28 44.1 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x6e050 0x4>,
+ <0x6e054 0x4>,
+ <0x6e058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_UART4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6e000 0x1000>;
+
+ uart4: serial@0 {
+ compatible = "ti,omap4-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ };
+ };
+
+ target-module@70000 { /* 0x48070000, ap 30 14.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x70000 0x8>,
+ <0x70010 0x8>,
+ <0x70090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_I2C1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x70000 0x1000>;
+
+ i2c1: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ target-module@72000 { /* 0x48072000, ap 32 1c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x72000 0x8>,
+ <0x72010 0x8>,
+ <0x72090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_I2C2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x72000 0x1000>;
+
+ i2c2: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ target-module@78000 { /* 0x48078000, ap 39 12.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x78000 0x1000>;
+ };
+
+ target-module@7a000 { /* 0x4807a000, ap 81 2c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x7a000 0x8>,
+ <0x7a010 0x8>,
+ <0x7a090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_I2C4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7a000 0x1000>;
+
+ i2c4: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ target-module@7c000 { /* 0x4807c000, ap 83 34.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x7c000 0x8>,
+ <0x7c010 0x8>,
+ <0x7c090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_I2C5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7c000 0x1000>;
+
+ i2c5: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ target-module@86000 { /* 0x48086000, ap 41 5e.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x86000 0x4>,
+ <0x86010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x86000 0x1000>;
+
+ timer10: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 24>,
+ <&sys_clkin>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ };
+ };
+
+ target-module@88000 { /* 0x48088000, ap 43 66.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x88000 0x4>,
+ <0x88010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x88000 0x1000>;
+
+ timer11: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 24>,
+ <&sys_clkin>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ };
+ };
+
+ rng_target: target-module@90000 { /* 0x48090000, ap 55 1a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x91fe0 0x4>,
+ <0x91fe4 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl OMAP5_RNG_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x90000 0x2000>;
+
+ rng: rng@0 {
+ compatible = "ti,omap4-rng";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@98000 { /* 0x48098000, ap 47 08.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x98000 0x4>,
+ <0x98010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_MCSPI1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x98000 0x1000>;
+
+ mcspi1: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,spi-num-cs = <4>;
+ dmas = <&sdma 35>,
+ <&sdma 36>,
+ <&sdma 37>,
+ <&sdma 38>,
+ <&sdma 39>,
+ <&sdma 40>,
+ <&sdma 41>,
+ <&sdma 42>;
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
+ };
+ };
+
+ target-module@9a000 { /* 0x4809a000, ap 49 10.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x9a000 0x4>,
+ <0x9a010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_MCSPI2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x9a000 0x1000>;
+
+ mcspi2: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,spi-num-cs = <2>;
+ dmas = <&sdma 43>,
+ <&sdma 44>,
+ <&sdma 45>,
+ <&sdma 46>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
+ };
+
+ target-module@9c000 { /* 0x4809c000, ap 51 3a.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x9c000 0x4>,
+ <0x9c010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+ clocks = <&l3init_clkctrl OMAP5_MMC1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x9c000 0x1000>;
+
+ mmc1: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ ti,dual-volt;
+ ti,needs-special-reset;
+ dmas = <&sdma 61>, <&sdma 62>;
+ dma-names = "tx", "rx";
+ pbias-supply = <&pbias_mmc_reg>;
+ };
+ };
+
+ target-module@a2000 { /* 0x480a2000, ap 75 02.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa2000 0x1000>;
+ };
+
+ target-module@a4000 { /* 0x480a4000, ap 57 3c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x000a4000 0x00001000>,
+ <0x00001000 0x000a5000 0x00001000>;
+ };
+
+ des_target: target-module@a5000 { /* 0x480a5000 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xa5030 0x4>,
+ <0xa5034 0x4>,
+ <0xa5038 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl OMAP5_DES3DES_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xa5000 0x00001000>;
+ status = "disabled";
+
+ des: des@0 {
+ compatible = "ti,omap4-des";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 117>, <&sdma 116>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@a8000 { /* 0x480a8000, ap 59 2a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa8000 0x4000>;
+ };
+
+ target-module@ad000 { /* 0x480ad000, ap 61 20.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xad000 0x4>,
+ <0xad010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_MMC3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xad000 0x1000>;
+
+ mmc3: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ ti,needs-special-reset;
+ dmas = <&sdma 77>, <&sdma 78>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@b2000 { /* 0x480b2000, ap 37 0c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb2000 0x1000>;
+ };
+
+ target-module@b4000 { /* 0x480b4000, ap 65 42.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xb4000 0x4>,
+ <0xb4010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+ clocks = <&l3init_clkctrl OMAP5_MMC2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb4000 0x1000>;
+
+ mmc2: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ ti,needs-special-reset;
+ dmas = <&sdma 47>, <&sdma 48>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@b8000 { /* 0x480b8000, ap 67 32.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xb8000 0x4>,
+ <0xb8010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_MCSPI3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb8000 0x1000>;
+
+ mcspi3: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,spi-num-cs = <2>;
+ dmas = <&sdma 15>, <&sdma 16>;
+ dma-names = "tx0", "rx0";
+ };
+ };
+
+ target-module@ba000 { /* 0x480ba000, ap 69 18.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xba000 0x4>,
+ <0xba010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_MCSPI4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xba000 0x1000>;
+
+ mcspi4: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,spi-num-cs = <1>;
+ dmas = <&sdma 70>, <&sdma 71>;
+ dma-names = "tx0", "rx0";
+ };
+ };
+
+ target-module@d1000 { /* 0x480d1000, ap 71 28.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xd1000 0x4>,
+ <0xd1010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_MMC4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd1000 0x1000>;
+
+ mmc4: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ ti,needs-special-reset;
+ dmas = <&sdma 57>, <&sdma 58>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ target-module@d5000 { /* 0x480d5000, ap 73 30.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xd5000 0x4>,
+ <0xd5010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+ clocks = <&l4per_clkctrl OMAP5_MMC5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd5000 0x1000>;
+
+ mmc5: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ ti,needs-special-reset;
+ dmas = <&sdma 59>, <&sdma 60>;
+ dma-names = "tx", "rx";
+ };
+ };
+ };
+
+ segment@200000 { /* 0x48200000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&l4_wkup { /* 0x4ae00000 */
+ compatible = "ti,omap5-l4-wkup", "simple-pm-bus";
+ power-domains = <&prm_wkupaon>;
+ clocks = <&wkupaon_clkctrl OMAP5_L4_WKUP_CLKCTRL 0>;
+ clock-names = "fck";
+ reg = <0x4ae00000 0x800>,
+ <0x4ae00800 0x800>,
+ <0x4ae01000 0x1000>;
+ reg-names = "ap", "la", "ia0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4ae00000 0x010000>, /* segment 0 */
+ <0x00010000 0x4ae10000 0x010000>, /* segment 1 */
+ <0x00020000 0x4ae20000 0x010000>; /* segment 2 */
+
+ segment@0 { /* 0x4ae00000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00001000 0x00001000 0x001000>, /* ap 1 */
+ <0x00000800 0x00000800 0x000800>, /* ap 2 */
+ <0x00006000 0x00006000 0x002000>, /* ap 3 */
+ <0x00008000 0x00008000 0x001000>, /* ap 4 */
+ <0x0000a000 0x0000a000 0x001000>, /* ap 15 */
+ <0x0000b000 0x0000b000 0x001000>, /* ap 16 */
+ <0x00004000 0x00004000 0x001000>, /* ap 17 */
+ <0x00005000 0x00005000 0x001000>, /* ap 18 */
+ <0x0000c000 0x0000c000 0x001000>, /* ap 19 */
+ <0x0000d000 0x0000d000 0x001000>; /* ap 20 */
+
+ target-module@4000 { /* 0x4ae04000, ap 17 20.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4000 0x4>,
+ <0x4010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
+ clocks = <&wkupaon_clkctrl OMAP5_COUNTER_32K_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+
+ counter32k: counter@0 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x0 0x40>;
+ };
+ };
+
+ target-module@6000 { /* 0x4ae06000, ap 3 08.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x6000 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6000 0x2000>;
+
+ prm: prm@0 {
+ compatible = "ti,omap5-prm", "simple-bus";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x2000>;
+
+ prm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prm_clockdomains: clockdomains {
+ };
+ };
+ };
+
+ target-module@a000 { /* 0x4ae0a000, ap 15 2c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xa000 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa000 0x1000>;
+
+ scrm: scrm@0 {
+ compatible = "ti,omap5-scrm";
+ reg = <0x0 0x1000>;
+
+ scrm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ scrm_clockdomains: clockdomains {
+ };
+ };
+ };
+
+ target-module@c000 { /* 0x4ae0c000, ap 19 28.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xc000 0x4>;
+ reg-names = "rev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc000 0x1000>;
+
+ omap5_pmx_wkup: pinmux@840 {
+ compatible = "ti,omap5-padconf",
+ "pinctrl-single";
+ reg = <0x840 0x003c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+
+ omap5_scm_wkup_pad_conf: omap5_scm_wkup_pad_conf@da0 {
+ compatible = "ti,omap5-scm-wkup-pad-conf",
+ "simple-bus";
+ reg = <0xda0 0x60>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x60>;
+
+ scm_wkup_pad_conf: scm_conf@0 {
+ compatible = "syscon", "simple-bus";
+ reg = <0x0 0x60>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x60>;
+
+ scm_wkup_pad_conf_clocks: clocks@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+ };
+ };
+
+ segment@10000 { /* 0x4ae10000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */
+ <0x00001000 0x00011000 0x001000>, /* ap 6 */
+ <0x00004000 0x00014000 0x001000>, /* ap 7 */
+ <0x00005000 0x00015000 0x001000>, /* ap 8 */
+ <0x00008000 0x00018000 0x001000>, /* ap 9 */
+ <0x00009000 0x00019000 0x001000>, /* ap 10 */
+ <0x0000c000 0x0001c000 0x001000>, /* ap 11 */
+ <0x0000d000 0x0001d000 0x001000>; /* ap 12 */
+
+ target-module@0 { /* 0x4ae10000, ap 5 10.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x0 0x4>,
+ <0x10 0x4>,
+ <0x114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
+ clocks = <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 0>,
+ <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+
+ gpio1: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ ti,gpio-always-on;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ target-module@4000 { /* 0x4ae14000, ap 7 14.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4000 0x4>,
+ <0x4010 0x4>,
+ <0x4014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
+ clocks = <&wkupaon_clkctrl OMAP5_WD_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+
+ wdt2: wdt@0 {
+ compatible = "ti,omap5-wdt", "ti,omap3-wdt";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ timer1_target: target-module@8000 { /* 0x4ae18000, ap 9 18.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x8000 0x4>,
+ <0x8010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
+ clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>,
+ <&sys_clkin>;
+ clock-names = "fck", "timer_sys_ck";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-alwon;
+ };
+ };
+
+ target-module@c000 { /* 0x4ae1c000, ap 11 1c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xc000 0x4>,
+ <0xc010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
+ clocks = <&wkupaon_clkctrl OMAP5_KBD_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc000 0x1000>;
+
+ keypad: keypad@0 {
+ compatible = "ti,omap4-keypad";
+ reg = <0x0 0x400>;
+ };
+ };
+ };
+
+ segment@20000 { /* 0x4ae20000 */
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */
+ <0x0000a000 0x0002a000 0x001000>, /* ap 14 */
+ <0x00000000 0x00020000 0x001000>, /* ap 21 */
+ <0x00001000 0x00021000 0x001000>, /* ap 22 */
+ <0x00002000 0x00022000 0x001000>, /* ap 23 */
+ <0x00003000 0x00023000 0x001000>, /* ap 24 */
+ <0x00007000 0x00027000 0x000400>, /* ap 25 */
+ <0x00008000 0x00028000 0x000800>, /* ap 26 */
+ <0x00009000 0x00029000 0x000100>, /* ap 27 */
+ <0x00008800 0x00028800 0x000200>, /* ap 28 */
+ <0x00008a00 0x00028a00 0x000100>; /* ap 29 */
+
+ target-module@0 { /* 0x4ae20000, ap 21 04.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+ };
+
+ target-module@2000 { /* 0x4ae22000, ap 23 0c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2000 0x1000>;
+ };
+
+ target-module@6000 { /* 0x4ae26000, ap 13 24.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00006000 0x00001000>,
+ <0x00001000 0x00007000 0x00000400>,
+ <0x00002000 0x00008000 0x00000800>,
+ <0x00002800 0x00008800 0x00000200>,
+ <0x00002a00 0x00008a00 0x00000100>,
+ <0x00003000 0x00009000 0x00000100>;
+ };
+ };
+};
+
diff --git a/src/arm/ti/omap/omap5-sbc-t54.dts b/src/arm/ti/omap/omap5-sbc-t54.dts
new file mode 100644
index 0000000..02716fb
--- /dev/null
+++ b/src/arm/ti/omap/omap5-sbc-t54.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Suppport for CompuLab CM-T54 on SB-T54 baseboard
+ */
+
+#include "omap5-cm-t54.dts"
+
+/ {
+ model = "CompuLab CM-T54 on SB-T54";
+ compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5";
+};
+
+&omap5_pmx_core {
+ i2c4_pins: i2c4-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+ >;
+ };
+
+ mmc1_aux_pins: mmc1-aux-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* timer5_pwm_evt.gpio8_228 */
+ OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* timer6_pwm_evt.gpio8_229 */
+ >;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &mmc1_pins
+ &mmc1_aux_pins
+ >;
+ cd-inverted;
+ wp-inverted;
+ cd-gpios = <&gpio8 4 GPIO_ACTIVE_LOW>; /* gpio8_228 */
+ wp-gpios = <&gpio8 5 GPIO_ACTIVE_LOW>; /* gpio8_229 */
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+
+ clock-frequency = <400000>;
+
+ at24@50 {
+ compatible = "atmel,24c02";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+};
diff --git a/src/arm/ti/omap/omap5-uevm.dts b/src/arm/ti/omap/omap5-uevm.dts
new file mode 100644
index 0000000..933de05
--- /dev/null
+++ b/src/arm/ti/omap/omap5-uevm.dts
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap5-board-common.dtsi"
+
+/ {
+ model = "TI OMAP5 uEVM board";
+ compatible = "ti,omap5-uevm", "ti,omap5";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dsp_memory_region: dsp-memory@95000000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x95000000 0 0x800000>;
+ reusable;
+ status = "okay";
+ };
+
+ ipu_memory_region: ipu-memory@95800000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x95800000 0 0x3800000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
+ aliases {
+ ethernet = ðernet;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "omap5:blue:usr1";
+ gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+
+ evm_keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&evm_keys_pins>;
+
+ #address-cells = <7>;
+ #size-cells = <0>;
+
+ btn1 {
+ label = "BTN1";
+ linux,code = <169>;
+ gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 */
+ wakeup-source;
+ autorepeat;
+ debounce-interval = <50>;
+ };
+ };
+
+ evm_leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "omap5:red:led";
+ gpios = <&gpio9 17 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led2 {
+ label = "omap5:green:led";
+ gpios = <&gpio9 18 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ led3 {
+ label = "omap5:blue:led";
+ gpios = <&gpio9 19 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc2";
+ default-state = "off";
+ };
+
+ led4 {
+ label = "omap5:green:led1";
+ gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led5 {
+ label = "omap5:green:led2";
+ gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ default-state = "off";
+ };
+
+ led6 {
+ label = "omap5:green:led3";
+ gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led7 {
+ label = "omap5:green:led4";
+ gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ default-state = "off";
+ };
+
+ led8 {
+ label = "omap5:green:led5";
+ gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+};
+
+&hdmi {
+ vdda-supply = <&ldo4_reg>;
+};
+
+&i2c1 {
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+};
+
+&i2c5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins>;
+
+ clock-frequency = <400000>;
+
+ gpio9: gpio@22 {
+ compatible = "ti,tca6424";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+
+ cd-gpios = <&gpio5 24 GPIO_ACTIVE_LOW>; /* gpio5_152 */
+};
+
+&omap5_pmx_core {
+ evm_keys_pins: evm-keys-gpio-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6) /* gpio3_83 */
+ >;
+ };
+
+ i2c5_pins: i2c5-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0) /* i2c5_scl */
+ OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0) /* i2c5_sda */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x1d4, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio5_152 */
+ >;
+ };
+};
+
+&tpd12s015 {
+ gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */
+ <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */
+ <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
+};
+
+&twl6040 {
+ ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */
+};
+
+&twl6040_pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
+ >;
+};
+
+&usbhsehci {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub@2 {
+ compatible = "usb424,3503";
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ethernet: ethernet@3 {
+ compatible = "usb424,9730";
+ reg = <3>;
+ };
+};
+
+&wlcore {
+ compatible = "ti,wl1837";
+};
+
+&dsp {
+ status = "okay";
+ memory-region = <&dsp_memory_region>;
+ ti,timers = <&timer5>;
+ ti,watchdog-timers = <&timer6>;
+};
+
+&ipu {
+ status = "okay";
+ memory-region = <&ipu_memory_region>;
+ ti,timers = <&timer3>;
+ ti,watchdog-timers = <&timer9>, <&timer11>;
+};
diff --git a/src/arm/ti/omap/omap5.dtsi b/src/arm/ti/omap/omap5.dtsi
new file mode 100644
index 0000000..bac6fa8
--- /dev/null
+++ b/src/arm/ti/omap/omap5.dtsi
@@ -0,0 +1,831 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Based on "omap4.dtsi"
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/omap.h>
+#include <dt-bindings/clock/omap5.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ compatible = "ti,omap5";
+ interrupt-parent = <&wakeupgen>;
+ chosen { };
+
+ aliases {
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ i2c3 = &i2c4;
+ i2c4 = &i2c5;
+ mmc0 = &mmc1;
+ mmc1 = &mmc2;
+ mmc2 = &mmc3;
+ mmc3 = &mmc4;
+ mmc4 = &mmc5;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ rproc0 = &dsp;
+ rproc1 = &ipu;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x0>;
+
+ operating-points = <
+ /* kHz uV */
+ 1000000 1060000
+ 1500000 1250000
+ >;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+
+ /* cooling options */
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x1>;
+
+ operating-points = <
+ /* kHz uV */
+ 1000000 1060000
+ 1500000 1250000
+ >;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+
+ /* cooling options */
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ };
+
+ thermal-zones {
+ #include "omap4-cpu-thermal.dtsi"
+ #include "omap5-gpu-thermal.dtsi"
+ #include "omap5-core-thermal.dtsi"
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ /* PPI secure/nonsecure IRQ */
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&gic>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /*
+ * Needed early by omap4_sram_init() for barrier, do not move to l3
+ * interconnect as simple-pm-bus probes at module_init() time.
+ */
+ ocmcram: sram@40300000 {
+ compatible = "mmio-sram";
+ reg = <0 0x40300000 0 0x20000>; /* 128k */
+ };
+
+ gic: interrupt-controller@48211000 {
+ compatible = "arm,cortex-a15-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0 0x48211000 0 0x1000>,
+ <0 0x48212000 0 0x2000>,
+ <0 0x48214000 0 0x2000>,
+ <0 0x48216000 0 0x2000>;
+ interrupt-parent = <&gic>;
+ };
+
+ wakeupgen: interrupt-controller@48281000 {
+ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0 0x48281000 0 0x1000>;
+ interrupt-parent = <&gic>;
+ };
+
+ /*
+ * XXX: Use a flat representation of the OMAP3 interconnect.
+ * The real OMAP interconnect network is quite complex.
+ * Since it will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp {
+ compatible = "simple-pm-bus";
+ power-domains = <&prm_core>;
+ clocks = <&l3main1_clkctrl OMAP5_L3_MAIN_1_CLKCTRL 0>,
+ <&l3main2_clkctrl OMAP5_L3_MAIN_2_CLKCTRL 0>,
+ <&l3instr_clkctrl OMAP5_L3_MAIN_3_CLKCTRL 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xc0000000>;
+ dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
+
+ l3-noc@44000000 {
+ compatible = "ti,omap5-l3-noc";
+ reg = <0x44000000 0x2000>,
+ <0x44800000 0x3000>,
+ <0x45000000 0x4000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ l4_wkup: interconnect@4ae00000 {
+ };
+
+ l4_cfg: interconnect@4a000000 {
+ };
+
+ l4_per: interconnect@48000000 {
+ };
+
+ target-module@48210000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ power-domains = <&prm_mpu>;
+ clocks = <&mpu_clkctrl OMAP5_MPU_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48210000 0x1f0000>;
+
+ mpu {
+ compatible = "ti,omap4-mpu";
+ sram = <&ocmcram>;
+ };
+ };
+
+ l4_abe: interconnect@40100000 {
+ };
+
+ target-module@50000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x50000000 4>,
+ <0x50000010 4>,
+ <0x50000014 4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ ti,no-idle-on-init;
+ clocks = <&l3main2_clkctrl OMAP5_L3_MAIN_2_GPMC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
+ <0x00000000 0x00000000 0x40000000>; /* data */
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,omap4430-gpmc";
+ reg = <0x50000000 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 4>;
+ dma-names = "rxtx";
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ clock-names = "fck";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ target-module@55082000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55082000 0x4>,
+ <0x55082010 0x4>,
+ <0x55082014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_core 2>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x55082000 0x100>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu_ipu: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
+ };
+
+ dsp: dsp {
+ compatible = "ti,omap5-dsp";
+ ti,bootreg = <&scm_conf 0x304 0>;
+ iommus = <&mmu_dsp>;
+ resets = <&prm_dsp 0>;
+ clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
+ firmware-name = "omap5-dsp-fw.xe64T";
+ mboxes = <&mailbox &mbox_dsp>;
+ status = "disabled";
+ };
+
+ ipu: ipu@55020000 {
+ compatible = "ti,omap5-ipu";
+ reg = <0x55020000 0x10000>;
+ reg-names = "l2ram";
+ iommus = <&mmu_ipu>;
+ resets = <&prm_core 0>, <&prm_core 1>;
+ clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
+ firmware-name = "omap5-ipu-fw.xem4";
+ mboxes = <&mailbox &mbox_ipu>;
+ status = "disabled";
+ };
+
+ target-module@4e000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4e000000 0x4>,
+ <0x4e000010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ranges = <0x0 0x4e000000 0x2000000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ dmm@0 {
+ compatible = "ti,omap5-dmm";
+ reg = <0 0x800>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ target-module@4c000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x4c000000 0x4>;
+ reg-names = "rev";
+ clocks = <&emif_clkctrl OMAP5_EMIF1_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4c000000 0x1000000>;
+
+ emif1: emif@0 {
+ compatible = "ti,emif-4d5";
+ reg = <0 0x400>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ phy-type = <2>; /* DDR PHY type: Intelli PHY */
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
+ };
+
+ target-module@4d000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x4d000000 0x4>;
+ reg-names = "rev";
+ clocks = <&emif_clkctrl OMAP5_EMIF2_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4d000000 0x1000000>;
+
+ emif2: emif@0 {
+ compatible = "ti,emif-4d5";
+ reg = <0 0x400>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ phy-type = <2>; /* DDR PHY type: Intelli PHY */
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
+ };
+
+ aes1_target: target-module@4b501000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4b501080 0x4>,
+ <0x4b501084 0x4>,
+ <0x4b501088 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl OMAP5_AES1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b501000 0x1000>;
+
+ aes1: aes@0 {
+ compatible = "ti,omap4-aes";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 111>, <&sdma 110>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ aes2_target: target-module@4b701000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4b701080 0x4>,
+ <0x4b701084 0x4>,
+ <0x4b701088 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl OMAP5_AES2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b701000 0x1000>;
+
+ aes2: aes@0 {
+ compatible = "ti,omap4-aes";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 114>, <&sdma 113>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ sham_target: target-module@4b100000 {
+ compatible = "ti,sysc-omap3-sham", "ti,sysc";
+ reg = <0x4b100100 0x4>,
+ <0x4b100110 0x4>,
+ <0x4b100114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl OMAP5_SHA2MD5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b100000 0x1000>;
+
+ sham: sham@0 {
+ compatible = "ti,omap4-sham";
+ reg = <0 0x300>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 119>;
+ dma-names = "rx";
+ };
+ };
+
+ bandgap: bandgap@4a0021e0 {
+ reg = <0x4a0021e0 0xc
+ 0x4a00232c 0xc
+ 0x4a002380 0x2c
+ 0x4a0023C0 0x3c>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ compatible = "ti,omap5430-bandgap";
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ target-module@56000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x5600fe00 0x4>,
+ <0x5600fe10 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&gpu_clkctrl OMAP5_GPU_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x56000000 0x2000000>;
+
+ /*
+ * Closed source PowerVR driver, no child device
+ * binding or driver in mainline
+ */
+ };
+
+ target-module@58000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x58000000 4>,
+ <0x58000014 4>;
+ reg-names = "rev", "syss";
+ ti,syss-mask = <1>;
+ power-domains = <&prm_dss>;
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 0>,
+ <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>,
+ <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 11>;
+ clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x58000000 0x1000000>;
+
+ dss: dss@0 {
+ compatible = "ti,omap5-dss";
+ reg = <0 0x80>;
+ status = "disabled";
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000000>;
+
+ target-module@1000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x1000 0x4>,
+ <0x1010 0x4>,
+ <0x1014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1000 0x1000>;
+
+ dispc@0 {
+ compatible = "ti,omap5-dispc";
+ reg = <0 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ };
+ };
+
+ target-module@2000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x2000 0x4>,
+ <0x2010 0x4>,
+ <0x2014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x1000>;
+
+ rfbi: encoder@0 {
+ compatible = "ti,omap5-rfbi";
+ reg = <0 0x100>;
+ status = "disabled";
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>;
+ clock-names = "fck", "ick";
+ };
+ };
+
+ target-module@4000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4000 0x4>,
+ <0x4010 0x4>,
+ <0x4014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4000 0x1000>;
+
+ dsi1: encoder@0 {
+ compatible = "ti,omap5-dsi";
+ reg = <0 0x200>,
+ <0x200 0x40>,
+ <0x300 0x40>;
+ reg-names = "proto", "phy", "pll";
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
+ <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+ clock-names = "fck", "sys_clk";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ target-module@9000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x9000 0x4>,
+ <0x9010 0x4>,
+ <0x9014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x9000 0x1000>;
+
+ dsi2: encoder@0 {
+ compatible = "ti,omap5-dsi";
+ reg = <0 0x200>,
+ <0x200 0x40>,
+ <0x300 0x40>;
+ reg-names = "proto", "phy", "pll";
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
+ <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+ clock-names = "fck", "sys_clk";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ target-module@40000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x40000 0x4>,
+ <0x40010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck", "dss_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x40000 0x40000>;
+
+ hdmi: encoder@0 {
+ compatible = "ti,omap5-hdmi";
+ reg = <0 0x200>,
+ <0x200 0x80>,
+ <0x300 0x80>,
+ <0x20000 0x19000>;
+ reg-names = "wp", "pll", "phy", "core";
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+ clock-names = "fck", "sys_clk";
+ dmas = <&sdma 76>;
+ dma-names = "audio_tx";
+ };
+ };
+ };
+ };
+
+ abb_mpu: regulator-abb-mpu {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_mpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
+ <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address", "ldo-address";
+ ti,tranxdone-status-mask = <0x80>;
+ /* LDOVBBMPU_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBMPU_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1060000 0 0x0 0 0x02000000 0x01F00000
+ 1250000 0 0x4 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_mm: regulator-abb-mm {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_mm";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
+ <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address", "ldo-address";
+ ti,tranxdone-status-mask = <0x80000000>;
+ /* LDOVBBMM_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBMM_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1025000 0 0x0 0 0x02000000 0x01F00000
+ 1120000 0 0x4 0 0x02000000 0x01F00000
+ >;
+ };
+ };
+};
+
+&cpu_thermal {
+ polling-delay = <500>; /* milliseconds */
+ coefficients = <65 (-1791)>;
+};
+
+#include "omap5-l4.dtsi"
+#include "omap54xx-clocks.dtsi"
+
+&gpu_thermal {
+ coefficients = <117 (-2992)>;
+};
+
+&core_thermal {
+ coefficients = <0 2000>;
+};
+
+#include "omap5-l4-abe.dtsi"
+#include "omap54xx-clocks.dtsi"
+
+&prm {
+ prm_mpu: prm@300 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x300 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_dsp: prm@400 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x400 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_abe: prm@500 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x500 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_coreaon: prm@600 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x600 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_core: prm@700 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x700 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_iva: prm@1200 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1200 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_cam: prm@1300 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1300 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_dss: prm@1400 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1400 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_gpu: prm@1500 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1500 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_l3init: prm@1600 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1600 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_custefuse: prm@1700 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1700 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_wkupaon: prm@1800 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1800 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_emu: prm@1a00 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1a00 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_device: prm@1c00 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1c00 0x100>;
+ #reset-cells = <1>;
+ };
+};
+
+/* Preferred always-on timer for clockevent */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_32k_ck>;
+ };
+};
diff --git a/src/arm/ti/omap/omap54xx-clocks.dtsi b/src/arm/ti/omap/omap54xx-clocks.dtsi
new file mode 100644
index 0000000..5cf3b0e
--- /dev/null
+++ b/src/arm/ti/omap/omap54xx-clocks.dtsi
@@ -0,0 +1,1362 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP5 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&cm_core_aon_clocks {
+ pad_clks_src_ck: pad_clks_src_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "pad_clks_src_ck";
+ clock-frequency = <12000000>;
+ };
+
+ pad_clks_ck: pad_clks_ck@108 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "pad_clks_ck";
+ clocks = <&pad_clks_src_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0108>;
+ };
+
+ secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "secure_32k_clk_src_ck";
+ clock-frequency = <32768>;
+ };
+
+ slimbus_src_clk: slimbus_src_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "slimbus_src_clk";
+ clock-frequency = <12000000>;
+ };
+
+ slimbus_clk: slimbus_clk@108 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "slimbus_clk";
+ clocks = <&slimbus_src_clk>;
+ ti,bit-shift = <10>;
+ reg = <0x0108>;
+ };
+
+ sys_32k_ck: sys_32k_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "sys_32k_ck";
+ clock-frequency = <32768>;
+ };
+
+ virt_12000000_ck: virt_12000000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_12000000_ck";
+ clock-frequency = <12000000>;
+ };
+
+ virt_13000000_ck: virt_13000000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_13000000_ck";
+ clock-frequency = <13000000>;
+ };
+
+ virt_16800000_ck: virt_16800000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_16800000_ck";
+ clock-frequency = <16800000>;
+ };
+
+ virt_19200000_ck: virt_19200000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_19200000_ck";
+ clock-frequency = <19200000>;
+ };
+
+ virt_26000000_ck: virt_26000000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_26000000_ck";
+ clock-frequency = <26000000>;
+ };
+
+ virt_27000000_ck: virt_27000000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_27000000_ck";
+ clock-frequency = <27000000>;
+ };
+
+ virt_38400000_ck: virt_38400000_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "virt_38400000_ck";
+ clock-frequency = <38400000>;
+ };
+
+ xclk60mhsp1_ck: xclk60mhsp1_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "xclk60mhsp1_ck";
+ clock-frequency = <60000000>;
+ };
+
+ xclk60mhsp2_ck: xclk60mhsp2_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "xclk60mhsp2_ck";
+ clock-frequency = <60000000>;
+ };
+
+ dpll_abe_ck: dpll_abe_ck@1e0 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-m4xen-clock";
+ clock-output-names = "dpll_abe_ck";
+ clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
+ reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+ };
+
+ dpll_abe_x2_ck: dpll_abe_x2_ck {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_abe_x2_ck";
+ clocks = <&dpll_abe_ck>;
+ };
+
+ dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_abe_m2x2_ck";
+ clocks = <&dpll_abe_x2_ck>;
+ ti,max-div = <31>;
+ reg = <0x01f0>;
+ ti,index-starts-at-one;
+ };
+
+ abe_24m_fclk: abe_24m_fclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "abe_24m_fclk";
+ clocks = <&dpll_abe_m2x2_ck>;
+ clock-mult = <1>;
+ clock-div = <8>;
+ };
+
+ abe_clk: abe_clk@108 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "abe_clk";
+ clocks = <&dpll_abe_m2x2_ck>;
+ ti,max-div = <4>;
+ reg = <0x0108>;
+ ti,index-power-of-two;
+ };
+
+ abe_iclk: abe_iclk@528 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "abe_iclk";
+ clocks = <&aess_fclk>;
+ ti,bit-shift = <24>;
+ reg = <0x0528>;
+ ti,dividers = <2>, <1>;
+ };
+
+ abe_lp_clk_div: abe_lp_clk_div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "abe_lp_clk_div";
+ clocks = <&dpll_abe_m2x2_ck>;
+ clock-mult = <1>;
+ clock-div = <16>;
+ };
+
+ dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_abe_m3x2_ck";
+ clocks = <&dpll_abe_x2_ck>;
+ ti,max-div = <31>;
+ reg = <0x01f4>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_core_byp_mux: dpll_core_byp_mux@12c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_core_byp_mux";
+ clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
+ ti,bit-shift = <23>;
+ reg = <0x012c>;
+ };
+
+ dpll_core_ck: dpll_core_ck@120 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-core-clock";
+ clock-output-names = "dpll_core_ck";
+ clocks = <&sys_clkin>, <&dpll_core_byp_mux>;
+ reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+ };
+
+ dpll_core_x2_ck: dpll_core_x2_ck {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_core_x2_ck";
+ clocks = <&dpll_core_ck>;
+ };
+
+ dpll_core_h21x2_ck: dpll_core_h21x2_ck@150 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h21x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <63>;
+ reg = <0x0150>;
+ ti,index-starts-at-one;
+ };
+
+ c2c_fclk: c2c_fclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "c2c_fclk";
+ clocks = <&dpll_core_h21x2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ c2c_iclk: c2c_iclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "c2c_iclk";
+ clocks = <&c2c_fclk>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ dpll_core_h11x2_ck: dpll_core_h11x2_ck@138 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h11x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <63>;
+ reg = <0x0138>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h12x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <63>;
+ reg = <0x013c>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h13x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <63>;
+ reg = <0x0140>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h14x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <63>;
+ reg = <0x0144>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h22x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <63>;
+ reg = <0x0154>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h23x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <63>;
+ reg = <0x0158>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h24x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <63>;
+ reg = <0x015c>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_core_m2_ck: dpll_core_m2_ck@130 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m2_ck";
+ clocks = <&dpll_core_ck>;
+ ti,max-div = <31>;
+ reg = <0x0130>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_core_m3x2_ck: dpll_core_m3x2_ck@134 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m3x2_ck";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <31>;
+ reg = <0x0134>;
+ ti,index-starts-at-one;
+ };
+
+ iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "iva_dpll_hs_clk_div";
+ clocks = <&dpll_core_h12x2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_iva_byp_mux";
+ clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
+ ti,bit-shift = <23>;
+ reg = <0x01ac>;
+ };
+
+ dpll_iva_ck: dpll_iva_ck@1a0 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_iva_ck";
+ clocks = <&sys_clkin>, <&dpll_iva_byp_mux>;
+ reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+ assigned-clocks = <&dpll_iva_ck>;
+ assigned-clock-rates = <1165000000>;
+ };
+
+ dpll_iva_x2_ck: dpll_iva_x2_ck {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_iva_x2_ck";
+ clocks = <&dpll_iva_ck>;
+ };
+
+ dpll_iva_h11x2_ck: dpll_iva_h11x2_ck@1b8 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_iva_h11x2_ck";
+ clocks = <&dpll_iva_x2_ck>;
+ ti,max-div = <63>;
+ reg = <0x01b8>;
+ ti,index-starts-at-one;
+ assigned-clocks = <&dpll_iva_h11x2_ck>;
+ assigned-clock-rates = <465920000>;
+ };
+
+ dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@1bc {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_iva_h12x2_ck";
+ clocks = <&dpll_iva_x2_ck>;
+ ti,max-div = <63>;
+ reg = <0x01bc>;
+ ti,index-starts-at-one;
+ assigned-clocks = <&dpll_iva_h12x2_ck>;
+ assigned-clock-rates = <388300000>;
+ };
+
+ mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "mpu_dpll_hs_clk_div";
+ clocks = <&dpll_core_h12x2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll_mpu_ck: dpll_mpu_ck@160 {
+ #clock-cells = <0>;
+ compatible = "ti,omap5-mpu-dpll-clock";
+ clock-output-names = "dpll_mpu_ck";
+ clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>;
+ reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+ };
+
+ dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_mpu_m2_ck";
+ clocks = <&dpll_mpu_ck>;
+ ti,max-div = <31>;
+ reg = <0x0170>;
+ ti,index-starts-at-one;
+ };
+
+ per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "per_dpll_hs_clk_div";
+ clocks = <&dpll_abe_m3x2_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "usb_dpll_hs_clk_div";
+ clocks = <&dpll_abe_m3x2_ck>;
+ clock-mult = <1>;
+ clock-div = <3>;
+ };
+
+ l3_iclk_div: l3_iclk_div@100 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "l3_iclk_div";
+ ti,max-div = <2>;
+ ti,bit-shift = <4>;
+ reg = <0x100>;
+ clocks = <&dpll_core_h12x2_ck>;
+ ti,index-power-of-two;
+ };
+
+ gpu_l3_iclk: gpu_l3_iclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "gpu_l3_iclk";
+ clocks = <&l3_iclk_div>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ l4_root_clk_div: l4_root_clk_div@100 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "l4_root_clk_div";
+ ti,max-div = <2>;
+ ti,bit-shift = <8>;
+ reg = <0x100>;
+ clocks = <&l3_iclk_div>;
+ ti,index-power-of-two;
+ };
+
+ slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "slimbus1_slimbus_clk";
+ clocks = <&slimbus_clk>;
+ ti,bit-shift = <11>;
+ reg = <0x0560>;
+ };
+
+ aess_fclk: aess_fclk@528 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "aess_fclk";
+ clocks = <&abe_clk>;
+ ti,bit-shift = <24>;
+ ti,max-div = <2>;
+ reg = <0x0528>;
+ };
+
+ mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "mcasp_sync_mux_ck";
+ clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+ ti,bit-shift = <26>;
+ reg = <0x0540>;
+ };
+
+ mcasp_gfclk: mcasp_gfclk@540 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "mcasp_gfclk";
+ clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+ ti,bit-shift = <24>;
+ reg = <0x0540>;
+ };
+
+ dummy_ck: dummy_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "dummy_ck";
+ clock-frequency = <0>;
+ };
+};
+&prm_clocks {
+ sys_clkin: sys_clkin@110 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "sys_clkin";
+ clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+ reg = <0x0110>;
+ ti,index-starts-at-one;
+ };
+
+ abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@108 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "abe_dpll_bypass_clk_mux";
+ clocks = <&sys_clkin>, <&sys_32k_ck>;
+ reg = <0x0108>;
+ };
+
+ abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "abe_dpll_clk_mux";
+ clocks = <&sys_clkin>, <&sys_32k_ck>;
+ reg = <0x010c>;
+ };
+
+ custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "custefuse_sys_gfclk_div";
+ clocks = <&sys_clkin>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ dss_syc_gfclk_div: dss_syc_gfclk_div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dss_syc_gfclk_div";
+ clocks = <&sys_clkin>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "wkupaon_iclk_mux";
+ clocks = <&sys_clkin>, <&abe_lp_clk_div>;
+ reg = <0x0108>;
+ };
+
+ l3instr_ts_gclk_div: l3instr_ts_gclk_div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "l3instr_ts_gclk_div";
+ clocks = <&wkupaon_iclk_mux>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+};
+
+&cm_core_clocks {
+
+ dpll_per_byp_mux: dpll_per_byp_mux@14c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_per_byp_mux";
+ clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
+ ti,bit-shift = <23>;
+ reg = <0x014c>;
+ };
+
+ dpll_per_ck: dpll_per_ck@140 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_per_ck";
+ clocks = <&sys_clkin>, <&dpll_per_byp_mux>;
+ reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+ };
+
+ dpll_per_x2_ck: dpll_per_x2_ck {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_per_x2_ck";
+ clocks = <&dpll_per_ck>;
+ };
+
+ dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_h11x2_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,max-div = <63>;
+ reg = <0x0158>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_h12x2_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,max-div = <63>;
+ reg = <0x015c>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_h14x2_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,max-div = <63>;
+ reg = <0x0164>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_per_m2_ck: dpll_per_m2_ck@150 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m2_ck";
+ clocks = <&dpll_per_ck>;
+ ti,max-div = <31>;
+ reg = <0x0150>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m2x2_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,max-div = <31>;
+ reg = <0x0150>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_per_m3x2_ck: dpll_per_m3x2_ck@154 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m3x2_ck";
+ clocks = <&dpll_per_x2_ck>;
+ ti,max-div = <31>;
+ reg = <0x0154>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_unipro1_ck: dpll_unipro1_ck@200 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_unipro1_ck";
+ clocks = <&sys_clkin>, <&sys_clkin>;
+ reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+ };
+
+ dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_unipro1_clkdcoldo";
+ clocks = <&dpll_unipro1_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll_unipro1_m2_ck: dpll_unipro1_m2_ck@210 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_unipro1_m2_ck";
+ clocks = <&dpll_unipro1_ck>;
+ ti,max-div = <127>;
+ reg = <0x0210>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_unipro2_ck: dpll_unipro2_ck@1c0 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_unipro2_ck";
+ clocks = <&sys_clkin>, <&sys_clkin>;
+ reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>;
+ };
+
+ dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_unipro2_clkdcoldo";
+ clocks = <&dpll_unipro2_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll_unipro2_m2_ck: dpll_unipro2_m2_ck@1d0 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_unipro2_m2_ck";
+ clocks = <&dpll_unipro2_ck>;
+ ti,max-div = <127>;
+ reg = <0x01d0>;
+ ti,index-starts-at-one;
+ };
+
+ dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_usb_byp_mux";
+ clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
+ ti,bit-shift = <23>;
+ reg = <0x018c>;
+ };
+
+ dpll_usb_ck: dpll_usb_ck@180 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-j-type-clock";
+ clock-output-names = "dpll_usb_ck";
+ clocks = <&sys_clkin>, <&dpll_usb_byp_mux>;
+ reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+ };
+
+ dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_usb_clkdcoldo";
+ clocks = <&dpll_usb_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
+ dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll_usb_m2_ck";
+ clocks = <&dpll_usb_ck>;
+ ti,max-div = <127>;
+ reg = <0x0190>;
+ ti,index-starts-at-one;
+ };
+
+ func_128m_clk: func_128m_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "func_128m_clk";
+ clocks = <&dpll_per_h11x2_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ func_12m_fclk: func_12m_fclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "func_12m_fclk";
+ clocks = <&dpll_per_m2x2_ck>;
+ clock-mult = <1>;
+ clock-div = <16>;
+ };
+
+ func_24m_clk: func_24m_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "func_24m_clk";
+ clocks = <&dpll_per_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ func_48m_fclk: func_48m_fclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "func_48m_fclk";
+ clocks = <&dpll_per_m2x2_ck>;
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+
+ func_96m_fclk: func_96m_fclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-output-names = "func_96m_fclk";
+ clocks = <&dpll_per_m2x2_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ l3init_60m_fclk: l3init_60m_fclk@104 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "l3init_60m_fclk";
+ clocks = <&dpll_usb_m2_ck>;
+ reg = <0x0104>;
+ ti,dividers = <1>, <8>;
+ };
+
+ iss_ctrlclk: iss_ctrlclk@1320 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "iss_ctrlclk";
+ clocks = <&func_96m_fclk>;
+ ti,bit-shift = <8>;
+ reg = <0x1320>;
+ };
+
+ lli_txphy_clk: lli_txphy_clk@f20 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "lli_txphy_clk";
+ clocks = <&dpll_unipro1_clkdcoldo>;
+ ti,bit-shift = <8>;
+ reg = <0x0f20>;
+ };
+
+ lli_txphy_ls_clk: lli_txphy_ls_clk@f20 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "lli_txphy_ls_clk";
+ clocks = <&dpll_unipro1_m2_ck>;
+ ti,bit-shift = <9>;
+ reg = <0x0f20>;
+ };
+
+ usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "usb_phy_cm_clk32k";
+ clocks = <&sys_32k_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0640>;
+ };
+
+ fdif_fclk: fdif_fclk@1328 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "fdif_fclk";
+ clocks = <&dpll_per_h11x2_ck>;
+ ti,bit-shift = <24>;
+ ti,max-div = <2>;
+ reg = <0x1328>;
+ };
+
+ gpu_core_gclk_mux: gpu_core_gclk_mux@1520 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "gpu_core_gclk_mux";
+ clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
+ ti,bit-shift = <24>;
+ reg = <0x1520>;
+ };
+
+ gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1520 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "gpu_hyd_gclk_mux";
+ clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
+ ti,bit-shift = <25>;
+ reg = <0x1520>;
+ };
+
+ hsi_fclk: hsi_fclk@1638 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "hsi_fclk";
+ clocks = <&dpll_per_m2x2_ck>;
+ ti,bit-shift = <24>;
+ ti,max-div = <2>;
+ reg = <0x1638>;
+ };
+};
+
+&cm_core_clockdomains {
+ l3init_clkdm: l3init_clkdm {
+ compatible = "ti,clockdomain";
+ clock-output-names = "l3init_clkdm";
+ clocks = <&dpll_usb_ck>;
+ };
+};
+
+&scrm_clocks {
+ auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk0_src_gate_ck";
+ clocks = <&dpll_core_m3x2_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0310>;
+ };
+
+ auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk0_src_mux_ck";
+ clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0310>;
+ };
+
+ auxclk0_src_ck: auxclk0_src_ck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clock-output-names = "auxclk0_src_ck";
+ clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
+ };
+
+ auxclk0_ck: auxclk0_ck@310 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "auxclk0_ck";
+ clocks = <&auxclk0_src_ck>;
+ ti,bit-shift = <16>;
+ ti,max-div = <16>;
+ reg = <0x0310>;
+ };
+
+ auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk1_src_gate_ck";
+ clocks = <&dpll_core_m3x2_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0314>;
+ };
+
+ auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk1_src_mux_ck";
+ clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0314>;
+ };
+
+ auxclk1_src_ck: auxclk1_src_ck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clock-output-names = "auxclk1_src_ck";
+ clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
+ };
+
+ auxclk1_ck: auxclk1_ck@314 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "auxclk1_ck";
+ clocks = <&auxclk1_src_ck>;
+ ti,bit-shift = <16>;
+ ti,max-div = <16>;
+ reg = <0x0314>;
+ };
+
+ auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk2_src_gate_ck";
+ clocks = <&dpll_core_m3x2_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0318>;
+ };
+
+ auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk2_src_mux_ck";
+ clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0318>;
+ };
+
+ auxclk2_src_ck: auxclk2_src_ck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clock-output-names = "auxclk2_src_ck";
+ clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
+ };
+
+ auxclk2_ck: auxclk2_ck@318 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "auxclk2_ck";
+ clocks = <&auxclk2_src_ck>;
+ ti,bit-shift = <16>;
+ ti,max-div = <16>;
+ reg = <0x0318>;
+ };
+
+ auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk3_src_gate_ck";
+ clocks = <&dpll_core_m3x2_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x031c>;
+ };
+
+ auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk3_src_mux_ck";
+ clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x031c>;
+ };
+
+ auxclk3_src_ck: auxclk3_src_ck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clock-output-names = "auxclk3_src_ck";
+ clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
+ };
+
+ auxclk3_ck: auxclk3_ck@31c {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "auxclk3_ck";
+ clocks = <&auxclk3_src_ck>;
+ ti,bit-shift = <16>;
+ ti,max-div = <16>;
+ reg = <0x031c>;
+ };
+
+ auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk4_src_gate_ck";
+ clocks = <&dpll_core_m3x2_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x0320>;
+ };
+
+ auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk4_src_mux_ck";
+ clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x0320>;
+ };
+
+ auxclk4_src_ck: auxclk4_src_ck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clock-output-names = "auxclk4_src_ck";
+ clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
+ };
+
+ auxclk4_ck: auxclk4_ck@320 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "auxclk4_ck";
+ clocks = <&auxclk4_src_ck>;
+ ti,bit-shift = <16>;
+ ti,max-div = <16>;
+ reg = <0x0320>;
+ };
+
+ auxclkreq0_ck: auxclkreq0_ck@210 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq0_ck";
+ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x0210>;
+ };
+
+ auxclkreq1_ck: auxclkreq1_ck@214 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq1_ck";
+ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x0214>;
+ };
+
+ auxclkreq2_ck: auxclkreq2_ck@218 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq2_ck";
+ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x0218>;
+ };
+
+ auxclkreq3_ck: auxclkreq3_ck@21c {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq3_ck";
+ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+ ti,bit-shift = <2>;
+ reg = <0x021c>;
+ };
+};
+
+&cm_core_aon {
+ mpu_cm: mpu_cm@300 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "mpu_cm";
+ reg = <0x300 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x300 0x100>;
+
+ mpu_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "mpu_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ dsp_cm: dsp_cm@400 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "dsp_cm";
+ reg = <0x400 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x400 0x100>;
+
+ dsp_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "dsp_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ abe_cm: abe_cm@500 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "abe_cm";
+ reg = <0x500 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x500 0x100>;
+
+ abe_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "abe_clkctrl";
+ reg = <0x20 0x64>;
+ #clock-cells = <2>;
+ };
+ };
+
+};
+
+&cm_core {
+ l3main1_cm: l3main1_cm@700 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l3main1_cm";
+ reg = <0x700 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x700 0x100>;
+
+ l3main1_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3main1_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l3main2_cm: l3main2_cm@800 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l3main2_cm";
+ reg = <0x800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x800 0x100>;
+
+ l3main2_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3main2_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ ipu_cm: ipu_cm@900 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "ipu_cm";
+ reg = <0x900 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x900 0x100>;
+
+ ipu_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "ipu_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ dma_cm: dma_cm@a00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "dma_cm";
+ reg = <0xa00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xa00 0x100>;
+
+ dma_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "dma_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ emif_cm: emif_cm@b00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "emif_cm";
+ reg = <0xb00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xb00 0x100>;
+
+ emif_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "emif_clkctrl";
+ reg = <0x20 0x1c>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l4cfg_cm: l4cfg_cm@d00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l4cfg_cm";
+ reg = <0xd00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xd00 0x100>;
+
+ l4cfg_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4cfg_clkctrl";
+ reg = <0x20 0x14>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l3instr_cm: l3instr_cm@e00 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l3instr_cm";
+ reg = <0xe00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xe00 0x100>;
+
+ l3instr_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3instr_clkctrl";
+ reg = <0x20 0xc>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l4per_cm: clock@1000 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l4per_cm";
+ reg = <0x1000 0x200>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1000 0x200>;
+
+ l4per_clkctrl: clock@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4per_clkctrl";
+ reg = <0x20 0x15c>;
+ #clock-cells = <2>;
+ };
+
+ l4sec_clkctrl: clock@1a0 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4sec_clkctrl";
+ reg = <0x1a0 0x3c>;
+ #clock-cells = <2>;
+ };
+ };
+
+ dss_cm: dss_cm@1400 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "dss_cm";
+ reg = <0x1400 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1400 0x100>;
+
+ dss_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "dss_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ gpu_cm: gpu_cm@1500 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "gpu_cm";
+ reg = <0x1500 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1500 0x100>;
+
+ gpu_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "gpu_clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+ };
+
+ l3init_cm: l3init_cm@1600 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "l3init_cm";
+ reg = <0x1600 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1600 0x100>;
+
+ l3init_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "l3init_clkctrl";
+ reg = <0x20 0xd4>;
+ #clock-cells = <2>;
+ };
+ };
+};
+
+&prm {
+ wkupaon_cm: wkupaon_cm@1900 {
+ compatible = "ti,omap4-cm";
+ clock-output-names = "wkupaon_cm";
+ reg = <0x1900 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1900 0x100>;
+
+ wkupaon_clkctrl: clk@20 {
+ compatible = "ti,clkctrl";
+ clock-output-names = "wkupaon_clkctrl";
+ reg = <0x20 0x5c>;
+ #clock-cells = <2>;
+ };
+ };
+};
+
+&scm_wkup_pad_conf_clocks {
+ fref_xtal_ck: fref_xtal_ck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "fref_xtal_ck";
+ clocks = <&sys_clkin>;
+ ti,bit-shift = <28>;
+ reg = <0x14>;
+ };
+};
diff --git a/src/arm/ti/omap/twl4030.dtsi b/src/arm/ti/omap/twl4030.dtsi
new file mode 100644
index 0000000..93e07c1
--- /dev/null
+++ b/src/arm/ti/omap/twl4030.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/*
+ * Integrated Power Management Chip
+ */
+&twl {
+ compatible = "ti,twl4030";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ rtc {
+ compatible = "ti,twl4030-rtc";
+ interrupts = <11>;
+ };
+
+ charger: bci {
+ compatible = "ti,twl4030-bci";
+ interrupts = <9>, <2>;
+ bci3v1-supply = <&vusb3v1>;
+ io-channels = <&twl_madc 11>;
+ io-channel-names = "vac";
+ };
+
+ watchdog {
+ compatible = "ti,twl4030-wdt";
+ };
+
+ vaux1: regulator-vaux1 {
+ compatible = "ti,twl4030-vaux1";
+ };
+
+ vaux2: regulator-vaux2 {
+ compatible = "ti,twl4030-vaux2";
+ };
+
+ vaux3: regulator-vaux3 {
+ compatible = "ti,twl4030-vaux3";
+ };
+
+ vaux4: regulator-vaux4 {
+ compatible = "ti,twl4030-vaux4";
+ };
+
+ vcc: regulator-vdd1 {
+ compatible = "ti,twl4030-vdd1";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1450000>;
+ };
+
+ vdac: regulator-vdac {
+ compatible = "ti,twl4030-vdac";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vio: regulator-vio {
+ compatible = "ti,twl4030-vio";
+ };
+
+ vintana1: regulator-vintana1 {
+ compatible = "ti,twl4030-vintana1";
+ };
+
+ vintana2: regulator-vintana2 {
+ compatible = "ti,twl4030-vintana2";
+ };
+
+ vintdig: regulator-vintdig {
+ compatible = "ti,twl4030-vintdig";
+ };
+
+ vmmc1: regulator-vmmc1 {
+ compatible = "ti,twl4030-vmmc1";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ vmmc2: regulator-vmmc2 {
+ compatible = "ti,twl4030-vmmc2";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ vusb1v5: regulator-vusb1v5 {
+ compatible = "ti,twl4030-vusb1v5";
+ };
+
+ vusb1v8: regulator-vusb1v8 {
+ compatible = "ti,twl4030-vusb1v8";
+ };
+
+ vusb3v1: regulator-vusb3v1 {
+ compatible = "ti,twl4030-vusb3v1";
+ };
+
+ vpll1: regulator-vpll1 {
+ compatible = "ti,twl4030-vpll1";
+ };
+
+ vpll2: regulator-vpll2 {
+ compatible = "ti,twl4030-vpll2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vsim: regulator-vsim {
+ compatible = "ti,twl4030-vsim";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ twl_gpio: gpio {
+ compatible = "ti,twl4030-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ usb2_phy: twl4030-usb {
+ compatible = "ti,twl4030-usb";
+ interrupts = <10>, <4>;
+ usb1v5-supply = <&vusb1v5>;
+ usb1v8-supply = <&vusb1v8>;
+ usb3v1-supply = <&vusb3v1>;
+ usb_mode = <1>;
+ #phy-cells = <0>;
+ };
+
+ twl_pwm: pwm {
+ compatible = "ti,twl4030-pwm";
+ #pwm-cells = <2>;
+ };
+
+ twl_pwmled: pwmled {
+ compatible = "ti,twl4030-pwmled";
+ #pwm-cells = <2>;
+ };
+
+ twl_pwrbutton: pwrbutton {
+ compatible = "ti,twl4030-pwrbutton";
+ interrupts = <8>;
+ };
+
+ twl_keypad: keypad {
+ compatible = "ti,twl4030-keypad";
+ interrupts = <1>;
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ };
+
+ twl_madc: madc {
+ compatible = "ti,twl4030-madc";
+ interrupts = <3>;
+ #io-channel-cells = <1>;
+ };
+};
diff --git a/src/arm/ti/omap/twl4030_omap3.dtsi b/src/arm/ti/omap/twl4030_omap3.dtsi
new file mode 100644
index 0000000..89433f2
--- /dev/null
+++ b/src/arm/ti/omap/twl4030_omap3.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Linaro, Ltd.
+ */
+
+&twl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&twl4030_pins &twl4030_vpins>;
+};
+
+&omap3_pmx_core {
+ /*
+ * On most OMAP3 platforms, the twl4030 IRQ line is connected
+ * to the SYS_NIRQ line on OMAP. Therefore, configure the
+ * defaults for the SYS_NIRQ pin here.
+ */
+ twl4030_pins: twl4030-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+ >;
+ };
+};
+
+/*
+ * If your board is not using the I2C4 pins with twl4030, then don't include
+ * this file. For proper idle mode signaling with sys_clkreq and sys_off_mode
+ * pins we need to configure I2C4, or else use the legacy sys_nvmode1 and
+ * sys_nvmode2 signaling.
+ */
+&omap3_pmx_wkup {
+ twl4030_vpins: twl4030-vpins-pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0) /* i2c4_scl.i2c4_scl */
+ OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0) /* i2c4_sda.i2c4_sda */
+ OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0) /* sys_clkreq.sys_clkreq */
+ OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0) /* sys_off_mode.sys_off_mode */
+ >;
+ };
+};
diff --git a/src/arm/ti/omap/twl6030.dtsi b/src/arm/ti/omap/twl6030.dtsi
new file mode 100644
index 0000000..9d588cf
--- /dev/null
+++ b/src/arm/ti/omap/twl6030.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+&twl {
+ compatible = "ti,twl6030";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ rtc {
+ compatible = "ti,twl4030-rtc";
+ interrupts = <11>;
+ };
+
+ vaux1: regulator-vaux1 {
+ compatible = "ti,twl6030-vaux1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vaux2: regulator-vaux2 {
+ compatible = "ti,twl6030-vaux2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vaux3: regulator-vaux3 {
+ compatible = "ti,twl6030-vaux3";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vmmc: regulator-vmmc {
+ compatible = "ti,twl6030-vmmc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vpp: regulator-vpp {
+ compatible = "ti,twl6030-vpp";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ vusim: regulator-vusim {
+ compatible = "ti,twl6030-vusim";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ vdac: regulator-vdac {
+ compatible = "ti,twl6030-vdac";
+ };
+
+ vana: regulator-vana {
+ compatible = "ti,twl6030-vana";
+ };
+
+ vcxio: regulator-vcxio {
+ compatible = "ti,twl6030-vcxio";
+ regulator-always-on;
+ };
+
+ vusb: regulator-vusb {
+ compatible = "ti,twl6030-vusb";
+ };
+
+ v1v8: regulator-v1v8 {
+ compatible = "ti,twl6030-v1v8";
+ regulator-always-on;
+ };
+
+ v2v1: regulator-v2v1 {
+ compatible = "ti,twl6030-v2v1";
+ regulator-always-on;
+ };
+
+ twl_usb_comparator: usb-comparator {
+ compatible = "ti,twl6030-usb";
+ interrupts = <4>, <10>;
+ };
+
+ twl_pwm: pwm {
+ /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
+ compatible = "ti,twl6030-pwm";
+ #pwm-cells = <2>;
+ };
+
+ twl_pwmled: pwmled {
+ /* provides one PWM (id 0 for Charging indicator LED) */
+ compatible = "ti,twl6030-pwmled";
+ #pwm-cells = <2>;
+ };
+
+ gpadc {
+ compatible = "ti,twl6030-gpadc";
+ interrupts = <3>;
+ #io-channel-cells = <1>;
+ };
+};
diff --git a/src/arm/ti/omap/twl6030_omap4.dtsi b/src/arm/ti/omap/twl6030_omap4.dtsi
new file mode 100644
index 0000000..64e38c7
--- /dev/null
+++ b/src/arm/ti/omap/twl6030_omap4.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&twl {
+ /*
+ * On most OMAP4 platforms, the twl6030 IRQ line is connected
+ * to the SYS_NIRQ1 line on OMAP and the twl6030 MSECURE line is
+ * connected to the fref_clk0_out.sys_drm_msecure line.
+ * Therefore, configure the defaults for the SYS_NIRQ1 and
+ * fref_clk0_out.sys_drm_msecure pins here.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6030_pins
+ &twl6030_wkup_pins
+ >;
+};
+
+&omap4_pmx_wkup {
+ twl6030_wkup_pins: twl6030-wkup-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */
+ >;
+ };
+};
+
+&omap4_pmx_core {
+ twl6030_pins: twl6030-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */
+ >;
+ };
+};