| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ |
| */ |
| |
| /* |
| * VScom OnRISC |
| * http://www.vscom.de |
| */ |
| |
| /dts-v1/; |
| |
| #include "am335x-baltos.dtsi" |
| #include "am335x-baltos-leds.dtsi" |
| |
| / { |
| model = "NetCAN"; |
| |
| leds { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&user_leds_s0>; |
| |
| compatible = "gpio-leds"; |
| |
| led@1 { |
| label = "can_data"; |
| linux,default-trigger = "netdev"; |
| gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; |
| default-state = "off"; |
| }; |
| led@2 { |
| label = "can_error"; |
| gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; |
| default-state = "off"; |
| }; |
| }; |
| }; |
| |
| &am33xx_pinmux { |
| user_leds_s0: user-leds-s0-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* CAN Data LED */ |
| AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* CAN Error LED */ |
| >; |
| }; |
| |
| dcan1_pins: dcan1-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* CAN TX */ |
| AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* CAN RX */ |
| >; |
| }; |
| }; |
| |
| &usb0_phy { |
| status = "okay"; |
| }; |
| |
| &usb0 { |
| status = "okay"; |
| dr_mode = "host"; |
| }; |
| |
| &davinci_mdio_sw { |
| phy0: ethernet-phy@0 { |
| reg = <1>; |
| }; |
| }; |
| |
| &cpsw_port1 { |
| phy-mode = "rmii"; |
| ti,dual-emac-pvid = <1>; |
| phy-handle = <&phy0>; |
| }; |
| |
| &cpsw_port2 { |
| phy-mode = "rgmii-id"; |
| ti,dual-emac-pvid = <2>; |
| phy-handle = <&phy1>; |
| }; |
| |
| &dcan1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&dcan1_pins>; |
| |
| status = "okay"; |
| }; |
| |
| &gpio0 { |
| gpio-line-names = |
| "MDIO", |
| "MDC", |
| "NC", |
| "NC", |
| "I2C1_SDA", |
| "I2C1_SCL", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "can_data", |
| "can_error", |
| "onrisc:blue:wlan", |
| "onrisc:green:app", |
| "USB0_DRVVBUS", |
| "ETH2_INT", |
| "NC", |
| "NC", |
| "MMC1_DAT0", |
| "MMC1_DAT1", |
| "NC", |
| "NC", |
| "MMC1_DAT2", |
| "MMC1_DAT3", |
| "NC", |
| "NC", |
| "GPMC_WAIT0", |
| "GPMC_WP_N"; |
| }; |
| |
| &gpio1 { |
| gpio-line-names = |
| "GPMC_AD0", |
| "GPMC_AD1", |
| "GPMC_AD2", |
| "GPMC_AD3", |
| "GPMC_AD4", |
| "GPMC_AD5", |
| "GPMC_AD6", |
| "GPMC_AD7", |
| "DCAN1_TX", |
| "DCAN1_RX", |
| "CONSOLE_RX", |
| "CONSOLE_TX", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "RGMII2_TCTL", |
| "RGMII2_RCTL", |
| "RGMII2_TD3", |
| "RGMII2_TD2", |
| "RGMII2_TD1", |
| "RGMII2_TD0", |
| "RGMII2_TCLK", |
| "RGMII2_RCLK", |
| "RGMII2_RD3", |
| "RGMII2_RD2", |
| "RGMII2_RD1", |
| "RGMII2_RD0", |
| "PMIC_INT1", |
| "GPMC_CSN0_Flash", |
| "MMC1_CLK", |
| "MMC1_CMD"; |
| }; |
| |
| &gpio2 { |
| gpio-line-names = |
| "GPMC_CSN3_BUS", |
| "GPMC_CLK", |
| "GPMC_ADVN_ALE", |
| "GPMC_OEN_RE_N", |
| "GPMC_WE_N", |
| "GPMC_BEN0_CLE", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "SW2_0", |
| "SW2_1", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "MMC0_DAT3", |
| "MMC0_DAT2", |
| "MMC0_DAT1", |
| "MMC0_DAT0", |
| "MMC0_CLK", |
| "MMC0_CMD"; |
| }; |
| |
| &gpio3 { |
| gpio-line-names = |
| "onrisc:red:power", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "WLAN_IRQ", |
| "WLAN_EN", |
| "SW2_2", |
| "SW2_3", |
| "NC", |
| "NC", |
| "NC", |
| "ModeA0", |
| "ModeA1", |
| "ModeA2", |
| "ModeA3", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC"; |
| }; |