| // SPDX-License-Identifier: (GPL-2.0+) |
| /* |
| * Copyright (C) 2015-2019 DH electronics GmbH |
| * Copyright (C) 2018 Marek Vasut <marex@denx.de> |
| */ |
| |
| #include "imx6qdl-dhcom.dtsi" |
| |
| / { |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| clk_ext_audio_codec: clock-codec { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <24000000>; |
| }; |
| |
| sound { |
| compatible = "fsl,imx-audio-sgtl5000"; |
| model = "imx-sgtl5000"; |
| ssi-controller = <&ssi1>; |
| audio-codec = <&sgtl5000>; |
| audio-routing = |
| "MIC_IN", "Mic Jack", |
| "Mic Jack", "Mic Bias", |
| "LINE_IN", "Line In Jack", |
| "Headphone Jack", "HP_OUT"; |
| mux-int-port = <1>; |
| mux-ext-port = <3>; |
| }; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux_ext>; |
| status = "okay"; |
| }; |
| |
| /* 1G ethernet */ |
| /delete-node/ ðphy0; |
| &fec { |
| phy-mode = "rgmii"; |
| phy-handle = <ðphy7>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet_1G>; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy7: ethernet-phy@7 { /* KSZ 9021 */ |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| interrupt-parent = <&gpio1>; |
| interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| pinctrl-0 = <&pinctrl_ethphy7>; |
| pinctrl-names = "default"; |
| reg = <7>; |
| reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; |
| reset-assert-us = <1000>; |
| reset-deassert-us = <1000>; |
| rxc-skew-ps = <3000>; |
| rxd0-skew-ps = <0>; |
| rxd1-skew-ps = <0>; |
| rxd2-skew-ps = <0>; |
| rxd3-skew-ps = <0>; |
| txc-skew-ps = <3000>; |
| txd0-skew-ps = <0>; |
| txd1-skew-ps = <0>; |
| txd2-skew-ps = <0>; |
| txd3-skew-ps = <0>; |
| rxdv-skew-ps = <0>; |
| txen-skew-ps = <0>; |
| }; |
| }; |
| }; |
| |
| &hdmi { |
| ddc-i2c-bus = <&i2c2>; |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| sgtl5000: codec@a { |
| compatible = "fsl,sgtl5000"; |
| reg = <0x0a>; |
| #sound-dai-cells = <0>; |
| clocks = <&clk_ext_audio_codec>; |
| VDDA-supply = <®_3p3v>; |
| VDDIO-supply = <®_3p3v>; |
| }; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog_base &pinctrl_hog>; |
| |
| pinctrl_hog: hog-grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x400120b0 |
| MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x400120b0 |
| MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x400120b0 |
| MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x400120b0 |
| MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x120b0 |
| MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x400120b0 |
| MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0 |
| MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x120b0 |
| MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x400120b0 |
| MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x400120b0 |
| MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x400120b0 |
| MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x400120b0 |
| MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x400120b0 |
| MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x400120b0 |
| MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x400120b0 |
| MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x400120b0 |
| MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x400120b0 |
| MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x400120b0 |
| MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x400120b0 |
| MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x400120b0 |
| MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x400120b0 |
| MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x400120b0 |
| MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x400120b0 |
| MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x400120b0 |
| >; |
| }; |
| |
| pinctrl_audmux_ext: audmux-ext-grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 |
| MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 |
| MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 |
| MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 |
| >; |
| }; |
| |
| pinctrl_enet_1G: enet-1G-grp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 |
| MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 |
| MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 |
| MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 |
| MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 |
| MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 |
| MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 |
| MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 |
| MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 |
| MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 |
| MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 |
| MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 |
| MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 |
| MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 |
| MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_ethphy7: ethphy7-grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D29__GPIO3_IO29 0xb0 /* Reset */ |
| MX6QDL_PAD_GPIO_0__GPIO1_IO00 0xb1 /* Int */ |
| MX6QDL_PAD_EIM_D26__GPIO3_IO26 0xb1 /* WOL */ |
| >; |
| }; |
| |
| pinctrl_pcie: pcie-grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1 |
| >; |
| }; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie>; |
| reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &ssi1 { |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| status = "okay"; |
| }; |