| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2013 Freescale Semiconductor, Inc. |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <env.h> |
| #include <fdt_support.h> |
| #include <hwconfig.h> |
| #include <image.h> |
| #include <init.h> |
| #include <log.h> |
| #include <netdev.h> |
| #include <linux/compiler.h> |
| #include <asm/mmu.h> |
| #include <asm/processor.h> |
| #include <asm/cache.h> |
| #include <asm/immap_85xx.h> |
| #include <asm/fsl_fdt.h> |
| #include <asm/fsl_law.h> |
| #include <asm/fsl_serdes.h> |
| #include <asm/fsl_liodn.h> |
| #include <fm_eth.h> |
| #include "../common/sleep.h" |
| #include "t104xrdb.h" |
| #include "cpld.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int checkboard(void) |
| { |
| struct cpu_type *cpu = gd->arch.cpu; |
| u8 sw; |
| |
| #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB) |
| printf("Board: %sD4RDB\n", cpu->name); |
| #else |
| printf("Board: %sRDB\n", cpu->name); |
| #endif |
| printf("Board rev: 0x%02x CPLD ver: 0x%02x, ", |
| CPLD_READ(hw_ver), CPLD_READ(sw_ver)); |
| |
| sw = CPLD_READ(flash_ctl_status); |
| sw = ((sw & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT); |
| |
| printf("vBank: %d\n", sw); |
| |
| return 0; |
| } |
| |
| int board_early_init_f(void) |
| { |
| #if defined(CONFIG_DEEP_SLEEP) |
| if (is_warm_boot()) |
| fsl_dp_disable_console(); |
| #endif |
| |
| return 0; |
| } |
| |
| int board_early_init_r(void) |
| { |
| #ifdef CONFIG_SYS_FLASH_BASE |
| const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; |
| int flash_esel = find_tlb_idx((void *)flashbase, 1); |
| |
| /* |
| * Remap Boot flash region to caching-inhibited |
| * so that flash can be erased properly. |
| */ |
| |
| /* Flush d-cache and invalidate i-cache of any FLASH data */ |
| flush_dcache(); |
| invalidate_icache(); |
| |
| if (flash_esel == -1) { |
| /* very unlikely unless something is messed up */ |
| puts("Error: Could not find TLB for FLASH BASE\n"); |
| flash_esel = 2; /* give our best effort to continue */ |
| } else { |
| /* invalidate existing TLB entry for flash */ |
| disable_tlb(flash_esel); |
| } |
| |
| set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, |
| MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, |
| 0, flash_esel, BOOKE_PAGESZ_256M, 1); |
| #endif |
| return 0; |
| } |
| |
| int misc_init_r(void) |
| { |
| ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| u32 srds_s1; |
| |
| srds_s1 = in_be32(&gur->rcwsr[4]) >> 24; |
| |
| printf("SERDES Reference : 0x%X\n", srds_s1); |
| |
| /* select SGMII*/ |
| if (srds_s1 == 0x86) |
| CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) | |
| MISC_CTL_SG_SEL); |
| |
| /* select SGMII and Aurora*/ |
| if (srds_s1 == 0x8E) |
| CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) | |
| MISC_CTL_SG_SEL | MISC_CTL_AURORA_SEL); |
| |
| #if defined(CONFIG_TARGET_T1040D4RDB) |
| if (hwconfig("qe-tdm")) { |
| CPLD_WRITE(sfp_ctl_status, CPLD_READ(sfp_ctl_status) | |
| MISC_MUX_QE_TDM); |
| printf("QECSR : 0x%02x, mux to qe-tdm\n", |
| CPLD_READ(sfp_ctl_status)); |
| } |
| /* Mask all CPLD interrupt sources, except QSGMII interrupts */ |
| if (CPLD_READ(sw_ver) < 0x03) { |
| debug("CPLD SW version 0x%02x doesn't support int_mask\n", |
| CPLD_READ(sw_ver)); |
| } else { |
| CPLD_WRITE(int_mask, CPLD_INT_MASK_ALL & |
| ~(CPLD_INT_MASK_QSGMII1 | CPLD_INT_MASK_QSGMII2)); |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| int ft_board_setup(void *blob, bd_t *bd) |
| { |
| phys_addr_t base; |
| phys_size_t size; |
| |
| ft_cpu_setup(blob, bd); |
| |
| base = env_get_bootm_low(); |
| size = env_get_bootm_size(); |
| |
| fdt_fixup_memory(blob, (u64)base, (u64)size); |
| |
| #ifdef CONFIG_PCI |
| pci_of_setup(blob, bd); |
| #endif |
| |
| fdt_fixup_liodn(blob); |
| |
| #ifdef CONFIG_HAS_FSL_DR_USB |
| fsl_fdt_fixup_dr_usb(blob, bd); |
| #endif |
| |
| #ifdef CONFIG_SYS_DPAA_FMAN |
| #ifndef CONFIG_DM_ETH |
| fdt_fixup_fman_ethernet(blob); |
| #endif |
| #endif |
| |
| if (hwconfig("qe-tdm")) |
| fdt_del_diu(blob); |
| return 0; |
| } |