Pankaj Gupta | c518de4 | 2020-12-09 14:02:39 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2021 NXP |
| 3 | * |
| 4 | * SPDX-License-Identifier: BSD-3-Clause |
| 5 | */ |
| 6 | |
| 7 | #include <errno.h> |
Scott Branden | e5dcf98 | 2020-08-25 13:49:32 -0700 | [diff] [blame] | 8 | #include <inttypes.h> |
Pankaj Gupta | c518de4 | 2020-12-09 14:02:39 +0530 | [diff] [blame] | 9 | #include <stdint.h> |
| 10 | #include <stdio.h> |
| 11 | #include <stdlib.h> |
| 12 | #include <string.h> |
| 13 | |
| 14 | #include <common/debug.h> |
| 15 | #include <ddr.h> |
| 16 | #ifndef CONFIG_DDR_NODIMM |
| 17 | #include <i2c.h> |
| 18 | #endif |
| 19 | #include <nxp_timer.h> |
| 20 | |
| 21 | struct dynamic_odt { |
| 22 | unsigned int odt_rd_cfg; |
| 23 | unsigned int odt_wr_cfg; |
| 24 | unsigned int odt_rtt_norm; |
| 25 | unsigned int odt_rtt_wr; |
| 26 | }; |
| 27 | |
| 28 | #ifndef CONFIG_STATIC_DDR |
| 29 | #if defined(PHY_GEN2_FW_IMAGE_BUFFER) && !defined(NXP_DDR_PHY_GEN2) |
| 30 | #error Missing NXP_DDR_PHY_GEN2 |
| 31 | #endif |
| 32 | #ifdef NXP_DDR_PHY_GEN2 |
| 33 | static const struct dynamic_odt single_D[4] = { |
| 34 | { /* cs0 */ |
| 35 | DDR_ODT_NEVER, |
| 36 | DDR_ODT_ALL, |
| 37 | DDR4_RTT_80_OHM, |
| 38 | DDR4_RTT_WR_OFF |
| 39 | }, |
| 40 | { /* cs1 */ |
| 41 | DDR_ODT_NEVER, |
| 42 | DDR_ODT_NEVER, |
| 43 | DDR4_RTT_OFF, |
| 44 | DDR4_RTT_WR_OFF |
| 45 | }, |
| 46 | {}, |
| 47 | {} |
| 48 | }; |
| 49 | |
| 50 | static const struct dynamic_odt single_S[4] = { |
| 51 | { /* cs0 */ |
| 52 | DDR_ODT_NEVER, |
| 53 | DDR_ODT_ALL, |
| 54 | DDR4_RTT_80_OHM, |
| 55 | DDR4_RTT_WR_OFF |
| 56 | }, |
| 57 | {}, |
| 58 | {}, |
| 59 | {}, |
| 60 | }; |
| 61 | |
| 62 | static const struct dynamic_odt dual_DD[4] = { |
| 63 | { /* cs0 */ |
| 64 | DDR_ODT_OTHER_DIMM, |
| 65 | DDR_ODT_ALL, |
| 66 | DDR4_RTT_60_OHM, |
| 67 | DDR4_RTT_WR_240_OHM |
| 68 | }, |
| 69 | { /* cs1 */ |
| 70 | DDR_ODT_OTHER_DIMM, |
| 71 | DDR_ODT_ALL, |
| 72 | DDR4_RTT_60_OHM, |
| 73 | DDR4_RTT_WR_240_OHM |
| 74 | }, |
| 75 | { /* cs2 */ |
| 76 | DDR_ODT_OTHER_DIMM, |
| 77 | DDR_ODT_ALL, |
| 78 | DDR4_RTT_60_OHM, |
| 79 | DDR4_RTT_WR_240_OHM |
| 80 | }, |
| 81 | { /* cs3 */ |
| 82 | DDR_ODT_OTHER_DIMM, |
| 83 | DDR_ODT_ALL, |
| 84 | DDR4_RTT_60_OHM, |
| 85 | DDR4_RTT_WR_240_OHM |
| 86 | } |
| 87 | }; |
| 88 | |
| 89 | static const struct dynamic_odt dual_SS[4] = { |
| 90 | { /* cs0 */ |
| 91 | DDR_ODT_NEVER, |
| 92 | DDR_ODT_ALL, |
| 93 | DDR4_RTT_80_OHM, |
| 94 | DDR4_RTT_WR_OFF |
| 95 | }, |
| 96 | {}, |
| 97 | { /* cs2 */ |
| 98 | DDR_ODT_NEVER, |
| 99 | DDR_ODT_ALL, |
| 100 | DDR4_RTT_80_OHM, |
| 101 | DDR4_RTT_WR_OFF |
| 102 | }, |
| 103 | {} |
| 104 | }; |
| 105 | |
| 106 | static const struct dynamic_odt dual_D0[4] = { |
| 107 | { /* cs0 */ |
| 108 | DDR_ODT_NEVER, |
| 109 | DDR_ODT_SAME_DIMM, |
| 110 | DDR4_RTT_80_OHM, |
| 111 | DDR4_RTT_WR_OFF |
| 112 | }, |
| 113 | { /* cs1 */ |
| 114 | DDR_ODT_NEVER, |
| 115 | DDR_ODT_NEVER, |
| 116 | DDR4_RTT_80_OHM, |
| 117 | DDR4_RTT_WR_OFF |
| 118 | }, |
| 119 | {}, |
| 120 | {} |
| 121 | }; |
| 122 | |
| 123 | static const struct dynamic_odt dual_S0[4] = { |
| 124 | { /* cs0 */ |
| 125 | DDR_ODT_NEVER, |
| 126 | DDR_ODT_CS, |
| 127 | DDR4_RTT_80_OHM, |
| 128 | DDR4_RTT_WR_OFF |
| 129 | }, |
| 130 | {}, |
| 131 | {}, |
| 132 | {} |
| 133 | }; |
| 134 | #else |
| 135 | static const struct dynamic_odt single_D[4] = { |
| 136 | { /* cs0 */ |
| 137 | DDR_ODT_NEVER, |
| 138 | DDR_ODT_ALL, |
| 139 | DDR4_RTT_40_OHM, |
| 140 | DDR4_RTT_WR_OFF |
| 141 | }, |
| 142 | { /* cs1 */ |
| 143 | DDR_ODT_NEVER, |
| 144 | DDR_ODT_NEVER, |
| 145 | DDR4_RTT_OFF, |
| 146 | DDR4_RTT_WR_OFF |
| 147 | }, |
| 148 | {}, |
| 149 | {} |
| 150 | }; |
| 151 | |
| 152 | static const struct dynamic_odt single_S[4] = { |
| 153 | { /* cs0 */ |
| 154 | DDR_ODT_NEVER, |
| 155 | DDR_ODT_ALL, |
| 156 | DDR4_RTT_40_OHM, |
| 157 | DDR4_RTT_WR_OFF |
| 158 | }, |
| 159 | {}, |
| 160 | {}, |
| 161 | {}, |
| 162 | }; |
| 163 | |
| 164 | static const struct dynamic_odt dual_DD[4] = { |
| 165 | { /* cs0 */ |
| 166 | DDR_ODT_NEVER, |
| 167 | DDR_ODT_SAME_DIMM, |
| 168 | DDR4_RTT_120_OHM, |
| 169 | DDR4_RTT_WR_OFF |
| 170 | }, |
| 171 | { /* cs1 */ |
| 172 | DDR_ODT_OTHER_DIMM, |
| 173 | DDR_ODT_OTHER_DIMM, |
| 174 | DDR4_RTT_34_OHM, |
| 175 | DDR4_RTT_WR_OFF |
| 176 | }, |
| 177 | { /* cs2 */ |
| 178 | DDR_ODT_NEVER, |
| 179 | DDR_ODT_SAME_DIMM, |
| 180 | DDR4_RTT_120_OHM, |
| 181 | DDR4_RTT_WR_OFF |
| 182 | }, |
| 183 | { /* cs3 */ |
| 184 | DDR_ODT_OTHER_DIMM, |
| 185 | DDR_ODT_OTHER_DIMM, |
| 186 | DDR4_RTT_34_OHM, |
| 187 | DDR4_RTT_WR_OFF |
| 188 | } |
| 189 | }; |
| 190 | |
| 191 | static const struct dynamic_odt dual_SS[4] = { |
| 192 | { /* cs0 */ |
| 193 | DDR_ODT_OTHER_DIMM, |
| 194 | DDR_ODT_ALL, |
| 195 | DDR4_RTT_34_OHM, |
| 196 | DDR4_RTT_WR_120_OHM |
| 197 | }, |
| 198 | {}, |
| 199 | { /* cs2 */ |
| 200 | DDR_ODT_OTHER_DIMM, |
| 201 | DDR_ODT_ALL, |
| 202 | DDR4_RTT_34_OHM, |
| 203 | DDR4_RTT_WR_120_OHM |
| 204 | }, |
| 205 | {} |
| 206 | }; |
| 207 | |
| 208 | static const struct dynamic_odt dual_D0[4] = { |
| 209 | { /* cs0 */ |
| 210 | DDR_ODT_NEVER, |
| 211 | DDR_ODT_SAME_DIMM, |
| 212 | DDR4_RTT_40_OHM, |
| 213 | DDR4_RTT_WR_OFF |
| 214 | }, |
| 215 | { /* cs1 */ |
| 216 | DDR_ODT_NEVER, |
| 217 | DDR_ODT_NEVER, |
| 218 | DDR4_RTT_OFF, |
| 219 | DDR4_RTT_WR_OFF |
| 220 | }, |
| 221 | {}, |
| 222 | {} |
| 223 | }; |
| 224 | |
| 225 | static const struct dynamic_odt dual_S0[4] = { |
| 226 | { /* cs0 */ |
| 227 | DDR_ODT_NEVER, |
| 228 | DDR_ODT_CS, |
| 229 | DDR4_RTT_40_OHM, |
| 230 | DDR4_RTT_WR_OFF |
| 231 | }, |
| 232 | {}, |
| 233 | {}, |
| 234 | {} |
| 235 | }; |
| 236 | #endif /* NXP_DDR_PHY_GEN2 */ |
| 237 | |
| 238 | /* |
| 239 | * Automatically select bank interleaving mode based on DIMMs |
| 240 | * in this order: cs0_cs1_cs2_cs3, cs0_cs1, null. |
| 241 | * This function only deal with one or two slots per controller. |
| 242 | */ |
| 243 | static inline unsigned int auto_bank_intlv(const int cs_in_use, |
| 244 | const struct dimm_params *pdimm) |
| 245 | { |
| 246 | switch (cs_in_use) { |
| 247 | case 0xf: |
| 248 | return DDR_BA_INTLV_CS0123; |
| 249 | case 0x3: |
| 250 | return DDR_BA_INTLV_CS01; |
| 251 | case 0x1: |
| 252 | return DDR_BA_NONE; |
| 253 | case 0x5: |
| 254 | return DDR_BA_NONE; |
| 255 | default: |
| 256 | break; |
| 257 | } |
| 258 | |
| 259 | return 0U; |
| 260 | } |
| 261 | |
| 262 | static int cal_odt(const unsigned int clk, |
| 263 | struct memctl_opt *popts, |
| 264 | struct ddr_conf *conf, |
| 265 | struct dimm_params *pdimm, |
| 266 | const int dimm_slot_per_ctrl) |
| 267 | |
| 268 | { |
| 269 | unsigned int i; |
| 270 | const struct dynamic_odt *pdodt = NULL; |
| 271 | |
Boyan Karatotev | 05e9d4d | 2022-11-22 14:31:41 +0000 | [diff] [blame] | 272 | static const struct dynamic_odt *table[2][5] = { |
Pankaj Gupta | c518de4 | 2020-12-09 14:02:39 +0530 | [diff] [blame] | 273 | {single_S, single_D, NULL, NULL}, |
| 274 | {dual_SS, dual_DD, NULL, NULL}, |
| 275 | }; |
| 276 | |
| 277 | if (dimm_slot_per_ctrl != 1 && dimm_slot_per_ctrl != 2) { |
| 278 | ERROR("Unsupported number of DIMMs\n"); |
| 279 | return -EINVAL; |
| 280 | } |
| 281 | |
| 282 | pdodt = table[dimm_slot_per_ctrl - 1][pdimm->n_ranks - 1]; |
| 283 | if (pdodt == dual_SS) { |
| 284 | pdodt = (conf->cs_in_use == 0x5) ? dual_SS : |
| 285 | ((conf->cs_in_use == 0x1) ? dual_S0 : NULL); |
| 286 | } else if (pdodt == dual_DD) { |
| 287 | pdodt = (conf->cs_in_use == 0xf) ? dual_DD : |
| 288 | ((conf->cs_in_use == 0x3) ? dual_D0 : NULL); |
| 289 | } |
| 290 | if (pdodt == dual_DD && pdimm->package_3ds) { |
| 291 | ERROR("Too many 3DS DIMMs.\n"); |
| 292 | return -EINVAL; |
| 293 | } |
| 294 | |
| 295 | if (pdodt == NULL) { |
Elyes Haouas | 2be03c0 | 2023-02-13 09:14:48 +0100 | [diff] [blame] | 296 | ERROR("Error determining ODT.\n"); |
Pankaj Gupta | c518de4 | 2020-12-09 14:02:39 +0530 | [diff] [blame] | 297 | return -EINVAL; |
| 298 | } |
| 299 | |
| 300 | /* Pick chip-select local options. */ |
| 301 | for (i = 0U; i < DDRC_NUM_CS; i++) { |
| 302 | debug("cs %d\n", i); |
| 303 | popts->cs_odt[i].odt_rd_cfg = pdodt[i].odt_rd_cfg; |
| 304 | debug(" odt_rd_cfg 0x%x\n", |
| 305 | popts->cs_odt[i].odt_rd_cfg); |
| 306 | popts->cs_odt[i].odt_wr_cfg = pdodt[i].odt_wr_cfg; |
| 307 | debug(" odt_wr_cfg 0x%x\n", |
| 308 | popts->cs_odt[i].odt_wr_cfg); |
| 309 | popts->cs_odt[i].odt_rtt_norm = pdodt[i].odt_rtt_norm; |
| 310 | debug(" odt_rtt_norm 0x%x\n", |
| 311 | popts->cs_odt[i].odt_rtt_norm); |
| 312 | popts->cs_odt[i].odt_rtt_wr = pdodt[i].odt_rtt_wr; |
| 313 | debug(" odt_rtt_wr 0x%x\n", |
| 314 | popts->cs_odt[i].odt_rtt_wr); |
| 315 | popts->cs_odt[i].auto_precharge = 0; |
| 316 | debug(" auto_precharge %d\n", |
| 317 | popts->cs_odt[i].auto_precharge); |
| 318 | } |
| 319 | |
| 320 | return 0; |
| 321 | } |
| 322 | |
| 323 | static int cal_opts(const unsigned int clk, |
| 324 | struct memctl_opt *popts, |
| 325 | struct ddr_conf *conf, |
| 326 | struct dimm_params *pdimm, |
| 327 | const int dimm_slot_per_ctrl, |
| 328 | const unsigned int ip_rev) |
| 329 | { |
| 330 | popts->rdimm = pdimm->rdimm; |
| 331 | popts->mirrored_dimm = pdimm->mirrored_dimm; |
| 332 | #ifdef CONFIG_DDR_ECC_EN |
| 333 | popts->ecc_mode = pdimm->edc_config == 0x02 ? 1 : 0; |
| 334 | #endif |
| 335 | popts->ctlr_init_ecc = popts->ecc_mode; |
| 336 | debug("ctlr_init_ecc %d\n", popts->ctlr_init_ecc); |
| 337 | popts->self_refresh_in_sleep = 1; |
| 338 | popts->dynamic_power = 0; |
| 339 | |
| 340 | /* |
| 341 | * check sdram width, allow platform override |
| 342 | * 0 = 64-bit, 1 = 32-bit, 2 = 16-bit |
| 343 | */ |
| 344 | if (pdimm->primary_sdram_width == 64) { |
| 345 | popts->data_bus_dimm = DDR_DBUS_64; |
| 346 | popts->otf_burst_chop_en = 1; |
| 347 | } else if (pdimm->primary_sdram_width == 32) { |
| 348 | popts->data_bus_dimm = DDR_DBUS_32; |
| 349 | popts->otf_burst_chop_en = 0; |
| 350 | } else if (pdimm->primary_sdram_width == 16) { |
| 351 | popts->data_bus_dimm = DDR_DBUS_16; |
| 352 | popts->otf_burst_chop_en = 0; |
| 353 | } else { |
| 354 | ERROR("primary sdram width invalid!\n"); |
| 355 | return -EINVAL; |
| 356 | } |
| 357 | popts->data_bus_used = popts->data_bus_dimm; |
| 358 | popts->x4_en = (pdimm->device_width == 4) ? 1 : 0; |
| 359 | debug("x4_en %d\n", popts->x4_en); |
| 360 | |
| 361 | /* for RDIMM and DDR4 UDIMM/discrete memory, address parity enable */ |
| 362 | if (popts->rdimm != 0) { |
| 363 | popts->ap_en = 1; /* 0 = disable, 1 = enable */ |
| 364 | } else { |
| 365 | popts->ap_en = 0; /* disabled for DDR4 UDIMM/discrete default */ |
| 366 | } |
| 367 | |
| 368 | if (ip_rev == 0x50500) { |
| 369 | popts->ap_en = 0; |
| 370 | } |
| 371 | |
| 372 | debug("ap_en %d\n", popts->ap_en); |
| 373 | |
| 374 | /* BSTTOPRE precharge interval uses 1/4 of refint value. */ |
| 375 | popts->bstopre = picos_to_mclk(clk, pdimm->refresh_rate_ps) >> 2; |
| 376 | popts->tfaw_ps = pdimm->tfaw_ps; |
| 377 | |
| 378 | return 0; |
| 379 | } |
| 380 | |
| 381 | static void cal_intlv(const int num_ctlrs, |
| 382 | struct memctl_opt *popts, |
| 383 | struct ddr_conf *conf, |
| 384 | struct dimm_params *pdimm) |
| 385 | { |
| 386 | #ifdef NXP_DDR_INTLV_256B |
| 387 | if (num_ctlrs == 2) { |
| 388 | popts->ctlr_intlv = 1; |
| 389 | popts->ctlr_intlv_mode = DDR_256B_INTLV; |
| 390 | } |
| 391 | #endif |
| 392 | debug("ctlr_intlv %d\n", popts->ctlr_intlv); |
| 393 | debug("ctlr_intlv_mode %d\n", popts->ctlr_intlv_mode); |
| 394 | |
| 395 | popts->ba_intlv = auto_bank_intlv(conf->cs_in_use, pdimm); |
| 396 | debug("ba_intlv 0x%x\n", popts->ba_intlv); |
| 397 | } |
| 398 | |
| 399 | static int update_burst_length(struct memctl_opt *popts) |
| 400 | { |
| 401 | /* Choose burst length. */ |
| 402 | if ((popts->data_bus_used == DDR_DBUS_32) || |
| 403 | (popts->data_bus_used == DDR_DBUS_16)) { |
| 404 | /* 32-bit or 16-bit bus */ |
| 405 | popts->otf_burst_chop_en = 0; |
| 406 | popts->burst_length = DDR_BL8; |
| 407 | } else if (popts->otf_burst_chop_en != 0) { /* on-the-fly burst chop */ |
| 408 | popts->burst_length = DDR_OTF; /* on-the-fly BC4 and BL8 */ |
| 409 | } else { |
| 410 | popts->burst_length = DDR_BL8; |
| 411 | } |
| 412 | debug("data_bus_used %d\n", popts->data_bus_used); |
| 413 | debug("otf_burst_chop_en %d\n", popts->otf_burst_chop_en); |
| 414 | debug("burst_length 0x%x\n", popts->burst_length); |
| 415 | /* |
| 416 | * If a reduced data width is requested, but the SPD |
| 417 | * specifies a physically wider device, adjust the |
| 418 | * computed dimm capacities accordingly before |
| 419 | * assigning addresses. |
| 420 | * 0 = 64-bit, 1 = 32-bit, 2 = 16-bit |
| 421 | */ |
| 422 | if (popts->data_bus_dimm > popts->data_bus_used) { |
| 423 | ERROR("Data bus configuration error\n"); |
| 424 | return -EINVAL; |
| 425 | } |
| 426 | popts->dbw_cap_shift = popts->data_bus_used - popts->data_bus_dimm; |
| 427 | debug("dbw_cap_shift %d\n", popts->dbw_cap_shift); |
| 428 | |
| 429 | return 0; |
| 430 | } |
| 431 | |
| 432 | int cal_board_params(struct ddr_info *priv, |
| 433 | const struct board_timing *dimm, |
| 434 | int len) |
| 435 | { |
| 436 | const unsigned long speed = priv->clk / 1000000; |
| 437 | const struct dimm_params *pdimm = &priv->dimm; |
| 438 | struct memctl_opt *popts = &priv->opt; |
| 439 | struct rc_timing const *prt = NULL; |
| 440 | struct rc_timing const *chosen = NULL; |
| 441 | int i; |
| 442 | |
| 443 | for (i = 0; i < len; i++) { |
| 444 | if (pdimm->rc == dimm[i].rc) { |
| 445 | prt = dimm[i].p; |
| 446 | break; |
| 447 | } |
| 448 | } |
| 449 | if (prt == NULL) { |
| 450 | ERROR("Board parameters no match.\n"); |
| 451 | return -EINVAL; |
| 452 | } |
| 453 | while (prt->speed_bin != 0) { |
| 454 | if (speed <= prt->speed_bin) { |
| 455 | chosen = prt; |
| 456 | break; |
| 457 | } |
| 458 | prt++; |
| 459 | } |
| 460 | if (chosen == NULL) { |
| 461 | ERROR("timing no match for speed %lu\n", speed); |
| 462 | return -EINVAL; |
| 463 | } |
| 464 | popts->clk_adj = prt->clk_adj; |
| 465 | popts->wrlvl_start = prt->wrlvl; |
| 466 | popts->wrlvl_ctl_2 = (prt->wrlvl * 0x01010101 + dimm[i].add1) & |
| 467 | 0xFFFFFFFF; |
| 468 | popts->wrlvl_ctl_3 = (prt->wrlvl * 0x01010101 + dimm[i].add2) & |
| 469 | 0xFFFFFFFF; |
| 470 | |
| 471 | return 0; |
| 472 | } |
| 473 | |
| 474 | static int synthesize_ctlr(struct ddr_info *priv) |
| 475 | { |
| 476 | int ret; |
| 477 | |
| 478 | ret = cal_odt(priv->clk, |
| 479 | &priv->opt, |
| 480 | &priv->conf, |
| 481 | &priv->dimm, |
| 482 | priv->dimm_on_ctlr); |
| 483 | if (ret != 0) { |
| 484 | return ret; |
| 485 | } |
| 486 | |
| 487 | ret = cal_opts(priv->clk, |
| 488 | &priv->opt, |
| 489 | &priv->conf, |
| 490 | &priv->dimm, |
| 491 | priv->dimm_on_ctlr, |
| 492 | priv->ip_rev); |
| 493 | |
| 494 | if (ret != 0) { |
| 495 | return ret; |
| 496 | } |
| 497 | |
| 498 | cal_intlv(priv->num_ctlrs, &priv->opt, &priv->conf, &priv->dimm); |
| 499 | ret = ddr_board_options(priv); |
| 500 | if (ret != 0) { |
| 501 | ERROR("Failed matching board timing.\n"); |
| 502 | } |
| 503 | |
| 504 | ret = update_burst_length(&priv->opt); |
| 505 | |
| 506 | return ret; |
| 507 | } |
| 508 | |
| 509 | /* Return the bit mask of valid DIMMs found */ |
| 510 | static int parse_spd(struct ddr_info *priv) |
| 511 | { |
| 512 | struct ddr_conf *conf = &priv->conf; |
| 513 | struct dimm_params *dimm = &priv->dimm; |
| 514 | int j, valid_mask = 0; |
| 515 | |
| 516 | #ifdef CONFIG_DDR_NODIMM |
| 517 | valid_mask = ddr_get_ddr_params(dimm, conf); |
| 518 | if (valid_mask < 0) { |
| 519 | ERROR("DDR params error\n"); |
| 520 | return valid_mask; |
| 521 | } |
| 522 | #else |
| 523 | const int *spd_addr = priv->spd_addr; |
| 524 | const int num_ctlrs = priv->num_ctlrs; |
| 525 | const int num_dimm = priv->dimm_on_ctlr; |
| 526 | struct ddr4_spd spd[2]; |
| 527 | unsigned int spd_checksum[2]; |
| 528 | int addr_idx = 0; |
| 529 | int spd_idx = 0; |
| 530 | int ret, addr, i; |
| 531 | |
| 532 | /* Scan all DIMMs */ |
| 533 | for (i = 0; i < num_ctlrs; i++) { |
| 534 | debug("Controller %d\n", i); |
| 535 | for (j = 0; j < num_dimm; j++, addr_idx++) { |
| 536 | debug("DIMM %d\n", j); |
| 537 | addr = spd_addr[addr_idx]; |
| 538 | if (addr == 0) { |
| 539 | if (j == 0) { |
| 540 | ERROR("First SPD addr wrong.\n"); |
| 541 | return -EINVAL; |
| 542 | } |
| 543 | continue; |
| 544 | } |
| 545 | debug("addr 0x%x\n", addr); |
| 546 | ret = read_spd(addr, &spd[spd_idx], |
| 547 | sizeof(struct ddr4_spd)); |
| 548 | if (ret != 0) { /* invalid */ |
| 549 | debug("Invalid SPD at address 0x%x\n", addr); |
| 550 | continue; |
| 551 | } |
| 552 | |
| 553 | spd_checksum[spd_idx] = |
| 554 | (spd[spd_idx].crc[1] << 24) | |
| 555 | (spd[spd_idx].crc[0] << 16) | |
| 556 | (spd[spd_idx].mod_section.uc[127] << 8) | |
| 557 | (spd[spd_idx].mod_section.uc[126] << 0); |
| 558 | debug("checksum 0x%x\n", spd_checksum[spd_idx]); |
| 559 | if (spd_checksum[spd_idx] == 0) { |
| 560 | debug("Bad checksum, ignored.\n"); |
| 561 | continue; |
| 562 | } |
| 563 | if (spd_idx == 0) { |
| 564 | /* first valid SPD */ |
| 565 | ret = cal_dimm_params(&spd[0], dimm); |
| 566 | if (ret != 0) { |
| 567 | ERROR("SPD calculation error\n"); |
| 568 | return -EINVAL; |
| 569 | } |
| 570 | } |
| 571 | |
| 572 | if (spd_idx != 0 && spd_checksum[0] != |
| 573 | spd_checksum[spd_idx]) { |
| 574 | ERROR("Not identical DIMMs.\n"); |
| 575 | return -EINVAL; |
| 576 | } |
| 577 | conf->dimm_in_use[j] = 1; |
| 578 | valid_mask |= 1 << addr_idx; |
| 579 | spd_idx = 1; |
| 580 | } |
| 581 | debug("done with controller %d\n", i); |
| 582 | } |
| 583 | switch (num_ctlrs) { |
| 584 | case 1: |
| 585 | if ((valid_mask & 0x1) == 0) { |
| 586 | ERROR("First slot cannot be empty.\n"); |
| 587 | return -EINVAL; |
| 588 | } |
| 589 | break; |
| 590 | case 2: |
| 591 | switch (num_dimm) { |
| 592 | case 1: |
| 593 | if (valid_mask == 0) { |
| 594 | ERROR("Both slot empty\n"); |
| 595 | return -EINVAL; |
| 596 | } |
| 597 | break; |
| 598 | case 2: |
| 599 | if (valid_mask != 0x5 && |
| 600 | valid_mask != 0xf && |
| 601 | (valid_mask & 0x7) != 0x4 && |
| 602 | (valid_mask & 0xd) != 0x1) { |
| 603 | ERROR("Invalid DIMM combination.\n"); |
| 604 | return -EINVAL; |
| 605 | } |
| 606 | break; |
| 607 | default: |
| 608 | ERROR("Invalid number of DIMMs.\n"); |
| 609 | return -EINVAL; |
| 610 | } |
| 611 | break; |
| 612 | default: |
| 613 | ERROR("Invalid number of controllers.\n"); |
| 614 | return -EINVAL; |
| 615 | } |
| 616 | /* now we have valid and identical DIMMs on controllers */ |
| 617 | #endif /* CONFIG_DDR_NODIMM */ |
| 618 | |
| 619 | debug("cal cs\n"); |
| 620 | conf->cs_in_use = 0; |
| 621 | for (j = 0; j < DDRC_NUM_DIMM; j++) { |
| 622 | if (conf->dimm_in_use[j] == 0) { |
| 623 | continue; |
| 624 | } |
| 625 | switch (dimm->n_ranks) { |
| 626 | case 4: |
| 627 | ERROR("Quad-rank DIMM not supported\n"); |
| 628 | return -EINVAL; |
| 629 | case 2: |
| 630 | conf->cs_on_dimm[j] = 0x3 << (j * CONFIG_CS_PER_SLOT); |
| 631 | conf->cs_in_use |= conf->cs_on_dimm[j]; |
| 632 | break; |
| 633 | case 1: |
| 634 | conf->cs_on_dimm[j] = 0x1 << (j * CONFIG_CS_PER_SLOT); |
| 635 | conf->cs_in_use |= conf->cs_on_dimm[j]; |
| 636 | break; |
| 637 | default: |
| 638 | ERROR("SPD error with n_ranks\n"); |
| 639 | return -EINVAL; |
| 640 | } |
| 641 | debug("cs_in_use = %x\n", conf->cs_in_use); |
| 642 | debug("cs_on_dimm[%d] = %x\n", j, conf->cs_on_dimm[j]); |
| 643 | } |
| 644 | #ifndef CONFIG_DDR_NODIMM |
| 645 | if (priv->dimm.rdimm != 0) { |
| 646 | NOTICE("RDIMM %s\n", priv->dimm.mpart); |
| 647 | } else { |
| 648 | NOTICE("UDIMM %s\n", priv->dimm.mpart); |
| 649 | } |
| 650 | #else |
| 651 | NOTICE("%s\n", priv->dimm.mpart); |
| 652 | #endif |
| 653 | |
| 654 | return valid_mask; |
| 655 | } |
| 656 | |
| 657 | static unsigned long long assign_intlv_addr( |
| 658 | const struct dimm_params *pdimm, |
| 659 | const struct memctl_opt *opt, |
| 660 | struct ddr_conf *conf, |
| 661 | const unsigned long long current_mem_base) |
| 662 | { |
| 663 | int i; |
| 664 | int ctlr_density_mul = 0; |
| 665 | const unsigned long long rank_density = pdimm->rank_density >> |
| 666 | opt->dbw_cap_shift; |
| 667 | unsigned long long total_ctlr_mem; |
| 668 | |
| 669 | debug("rank density 0x%llx\n", rank_density); |
| 670 | switch (opt->ba_intlv & DDR_BA_INTLV_CS0123) { |
| 671 | case DDR_BA_INTLV_CS0123: |
| 672 | ctlr_density_mul = 4; |
| 673 | break; |
| 674 | case DDR_BA_INTLV_CS01: |
| 675 | ctlr_density_mul = 2; |
| 676 | break; |
| 677 | default: |
| 678 | ctlr_density_mul = 1; |
| 679 | break; |
| 680 | } |
| 681 | debug("ctlr density mul %d\n", ctlr_density_mul); |
| 682 | switch (opt->ctlr_intlv_mode) { |
| 683 | case DDR_256B_INTLV: |
| 684 | total_ctlr_mem = 2 * ctlr_density_mul * rank_density; |
| 685 | break; |
| 686 | default: |
| 687 | ERROR("Unknown interleaving mode"); |
| 688 | return 0; |
| 689 | } |
| 690 | conf->base_addr = current_mem_base; |
| 691 | conf->total_mem = total_ctlr_mem; |
| 692 | |
| 693 | /* overwrite cs_in_use bitmask with controller interleaving */ |
| 694 | conf->cs_in_use = (1 << ctlr_density_mul) - 1; |
| 695 | debug("Overwrite cs_in_use as %x\n", conf->cs_in_use); |
| 696 | |
| 697 | /* Fill addr with each cs in use */ |
| 698 | for (i = 0; i < ctlr_density_mul; i++) { |
| 699 | conf->cs_base_addr[i] = current_mem_base; |
| 700 | conf->cs_size[i] = total_ctlr_mem; |
| 701 | debug("CS %d\n", i); |
| 702 | debug(" base_addr 0x%llx\n", conf->cs_base_addr[i]); |
| 703 | debug(" size 0x%llx\n", conf->cs_size[i]); |
| 704 | } |
| 705 | |
| 706 | return total_ctlr_mem; |
| 707 | } |
| 708 | |
| 709 | static unsigned long long assign_non_intlv_addr( |
| 710 | const struct dimm_params *pdimm, |
| 711 | const struct memctl_opt *opt, |
| 712 | struct ddr_conf *conf, |
| 713 | unsigned long long current_mem_base) |
| 714 | { |
| 715 | int i; |
| 716 | const unsigned long long rank_density = pdimm->rank_density >> |
| 717 | opt->dbw_cap_shift; |
| 718 | unsigned long long total_ctlr_mem = 0ULL; |
| 719 | |
| 720 | debug("rank density 0x%llx\n", rank_density); |
| 721 | conf->base_addr = current_mem_base; |
| 722 | |
| 723 | /* assign each cs */ |
| 724 | switch (opt->ba_intlv & DDR_BA_INTLV_CS0123) { |
| 725 | case DDR_BA_INTLV_CS0123: |
| 726 | for (i = 0; i < DDRC_NUM_CS; i++) { |
| 727 | conf->cs_base_addr[i] = current_mem_base; |
| 728 | conf->cs_size[i] = rank_density << 2; |
| 729 | total_ctlr_mem += rank_density; |
| 730 | } |
| 731 | break; |
| 732 | case DDR_BA_INTLV_CS01: |
| 733 | for (i = 0; ((conf->cs_in_use & (1 << i)) != 0) && i < 2; i++) { |
| 734 | conf->cs_base_addr[i] = current_mem_base; |
| 735 | conf->cs_size[i] = rank_density << 1; |
| 736 | total_ctlr_mem += rank_density; |
| 737 | } |
| 738 | current_mem_base += total_ctlr_mem; |
| 739 | for (; ((conf->cs_in_use & (1 << i)) != 0) && i < DDRC_NUM_CS; |
| 740 | i++) { |
| 741 | conf->cs_base_addr[i] = current_mem_base; |
| 742 | conf->cs_size[i] = rank_density; |
| 743 | total_ctlr_mem += rank_density; |
| 744 | current_mem_base += rank_density; |
| 745 | } |
| 746 | break; |
| 747 | case DDR_BA_NONE: |
| 748 | for (i = 0; ((conf->cs_in_use & (1 << i)) != 0) && |
| 749 | (i < DDRC_NUM_CS); i++) { |
| 750 | conf->cs_base_addr[i] = current_mem_base; |
| 751 | conf->cs_size[i] = rank_density; |
| 752 | current_mem_base += rank_density; |
| 753 | total_ctlr_mem += rank_density; |
| 754 | } |
| 755 | break; |
| 756 | default: |
| 757 | ERROR("Unsupported bank interleaving\n"); |
| 758 | return 0; |
| 759 | } |
| 760 | for (i = 0; ((conf->cs_in_use & (1 << i)) != 0) && |
| 761 | (i < DDRC_NUM_CS); i++) { |
| 762 | debug("CS %d\n", i); |
| 763 | debug(" base_addr 0x%llx\n", conf->cs_base_addr[i]); |
| 764 | debug(" size 0x%llx\n", conf->cs_size[i]); |
| 765 | } |
| 766 | |
| 767 | return total_ctlr_mem; |
| 768 | } |
| 769 | |
| 770 | unsigned long long assign_addresses(struct ddr_info *priv) |
| 771 | __attribute__ ((weak)); |
| 772 | |
| 773 | unsigned long long assign_addresses(struct ddr_info *priv) |
| 774 | { |
| 775 | struct memctl_opt *opt = &priv->opt; |
| 776 | const struct dimm_params *dimm = &priv->dimm; |
| 777 | struct ddr_conf *conf = &priv->conf; |
| 778 | unsigned long long current_mem_base = priv->mem_base; |
| 779 | unsigned long long total_mem; |
| 780 | |
| 781 | total_mem = 0ULL; |
| 782 | debug("ctlr_intlv %d\n", opt->ctlr_intlv); |
| 783 | if (opt->ctlr_intlv != 0) { |
| 784 | total_mem = assign_intlv_addr(dimm, opt, conf, |
| 785 | current_mem_base); |
| 786 | } else { |
| 787 | /* |
| 788 | * Simple linear assignment if memory controllers are not |
| 789 | * interleaved. This is only valid for SoCs with single DDRC. |
| 790 | */ |
| 791 | total_mem = assign_non_intlv_addr(dimm, opt, conf, |
| 792 | current_mem_base); |
| 793 | } |
| 794 | conf->total_mem = total_mem; |
| 795 | debug("base 0x%llx\n", current_mem_base); |
| 796 | debug("Total mem by assignment is 0x%llx\n", total_mem); |
| 797 | |
| 798 | return total_mem; |
| 799 | } |
| 800 | |
| 801 | static int cal_ddrc_regs(struct ddr_info *priv) |
| 802 | { |
| 803 | int ret; |
| 804 | |
| 805 | ret = compute_ddrc(priv->clk, |
| 806 | &priv->opt, |
| 807 | &priv->conf, |
| 808 | &priv->ddr_reg, |
| 809 | &priv->dimm, |
| 810 | priv->ip_rev); |
| 811 | if (ret != 0) { |
| 812 | ERROR("Calculating DDR registers failed\n"); |
| 813 | } |
| 814 | |
| 815 | return ret; |
| 816 | } |
| 817 | |
| 818 | #endif /* CONFIG_STATIC_DDR */ |
| 819 | |
| 820 | static int write_ddrc_regs(struct ddr_info *priv) |
| 821 | { |
| 822 | int i; |
| 823 | int ret; |
| 824 | |
| 825 | for (i = 0; i < priv->num_ctlrs; i++) { |
| 826 | ret = ddrc_set_regs(priv->clk, &priv->ddr_reg, priv->ddr[i], 0); |
| 827 | if (ret != 0) { |
| 828 | ERROR("Writing DDR register(s) failed\n"); |
| 829 | return ret; |
| 830 | } |
| 831 | } |
| 832 | |
| 833 | return 0; |
| 834 | } |
| 835 | |
| 836 | long long dram_init(struct ddr_info *priv |
| 837 | #if defined(NXP_HAS_CCN504) || defined(NXP_HAS_CCN508) |
| 838 | , uintptr_t nxp_ccn_hn_f0_addr |
| 839 | #endif |
| 840 | ) |
| 841 | { |
| 842 | uint64_t time __unused; |
| 843 | long long dram_size; |
| 844 | int ret; |
| 845 | const uint64_t time_base = get_timer_val(0); |
| 846 | unsigned int ip_rev = get_ddrc_version(priv->ddr[0]); |
| 847 | |
| 848 | int valid_spd_mask __unused; |
| 849 | int scratch = 0x0; |
| 850 | |
| 851 | priv->ip_rev = ip_rev; |
| 852 | |
| 853 | #ifndef CONFIG_STATIC_DDR |
Scott Branden | e5dcf98 | 2020-08-25 13:49:32 -0700 | [diff] [blame] | 854 | INFO("time base %" PRIu64 " ms\n", time_base); |
Pankaj Gupta | c518de4 | 2020-12-09 14:02:39 +0530 | [diff] [blame] | 855 | debug("Parse DIMM SPD(s)\n"); |
| 856 | valid_spd_mask = parse_spd(priv); |
| 857 | |
| 858 | if (valid_spd_mask < 0) { |
| 859 | ERROR("Parsing DIMM Error\n"); |
| 860 | return valid_spd_mask; |
| 861 | } |
| 862 | |
| 863 | #if defined(NXP_HAS_CCN504) || defined(NXP_HAS_CCN508) |
| 864 | if (priv->num_ctlrs == 2 || priv->num_ctlrs == 1) { |
| 865 | ret = disable_unused_ddrc(priv, valid_spd_mask, |
| 866 | nxp_ccn_hn_f0_addr); |
| 867 | if (ret != 0) { |
| 868 | return ret; |
| 869 | } |
| 870 | } |
| 871 | #endif |
| 872 | |
| 873 | time = get_timer_val(time_base); |
Scott Branden | e5dcf98 | 2020-08-25 13:49:32 -0700 | [diff] [blame] | 874 | INFO("Time after parsing SPD %" PRIu64 " ms\n", time); |
Pankaj Gupta | c518de4 | 2020-12-09 14:02:39 +0530 | [diff] [blame] | 875 | debug("Synthesize configurations\n"); |
| 876 | ret = synthesize_ctlr(priv); |
| 877 | if (ret != 0) { |
| 878 | ERROR("Synthesize config error\n"); |
| 879 | return ret; |
| 880 | } |
| 881 | |
| 882 | debug("Assign binding addresses\n"); |
| 883 | dram_size = assign_addresses(priv); |
| 884 | if (dram_size == 0) { |
| 885 | ERROR("Assigning address error\n"); |
| 886 | return -EINVAL; |
| 887 | } |
| 888 | |
| 889 | debug("Calculate controller registers\n"); |
| 890 | ret = cal_ddrc_regs(priv); |
| 891 | if (ret != 0) { |
| 892 | ERROR("Calculate register error\n"); |
| 893 | return ret; |
| 894 | } |
| 895 | |
| 896 | ret = compute_ddr_phy(priv); |
| 897 | if (ret != 0) |
| 898 | ERROR("Calculating DDR PHY registers failed.\n"); |
| 899 | |
| 900 | #else |
| 901 | dram_size = board_static_ddr(priv); |
| 902 | if (dram_size == 0) { |
| 903 | ERROR("Error getting static DDR settings.\n"); |
| 904 | return -EINVAL; |
| 905 | } |
| 906 | #endif |
| 907 | |
| 908 | if (priv->warm_boot_flag == DDR_WARM_BOOT) { |
| 909 | scratch = (priv->ddr_reg).sdram_cfg[1]; |
| 910 | scratch = scratch & ~(SDRAM_CFG2_D_INIT); |
| 911 | priv->ddr_reg.sdram_cfg[1] = scratch; |
| 912 | } |
| 913 | |
| 914 | time = get_timer_val(time_base); |
Scott Branden | e5dcf98 | 2020-08-25 13:49:32 -0700 | [diff] [blame] | 915 | INFO("Time before programming controller %" PRIu64 " ms\n", time); |
Pankaj Gupta | c518de4 | 2020-12-09 14:02:39 +0530 | [diff] [blame] | 916 | debug("Program controller registers\n"); |
| 917 | ret = write_ddrc_regs(priv); |
| 918 | if (ret != 0) { |
Elyes Haouas | 2be03c0 | 2023-02-13 09:14:48 +0100 | [diff] [blame] | 919 | ERROR("Programming DDRC error\n"); |
Pankaj Gupta | c518de4 | 2020-12-09 14:02:39 +0530 | [diff] [blame] | 920 | return ret; |
| 921 | } |
| 922 | |
| 923 | puts(""); |
| 924 | NOTICE("%lld GB ", dram_size >> 30); |
| 925 | print_ddr_info(priv->ddr[0]); |
| 926 | |
| 927 | time = get_timer_val(time_base); |
Scott Branden | e5dcf98 | 2020-08-25 13:49:32 -0700 | [diff] [blame] | 928 | INFO("Time used by DDR driver %" PRIu64 " ms\n", time); |
Pankaj Gupta | c518de4 | 2020-12-09 14:02:39 +0530 | [diff] [blame] | 929 | |
| 930 | return dram_size; |
| 931 | } |