Soby Mathew | e063d3c | 2015-10-07 09:45:27 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved. |
| 3 | * |
dp-arm | fa3cf0b | 2017-05-03 09:38:09 +0100 | [diff] [blame] | 4 | * SPDX-License-Identifier: BSD-3-Clause |
Soby Mathew | e063d3c | 2015-10-07 09:45:27 +0100 | [diff] [blame] | 5 | */ |
| 6 | |
| 7 | #ifndef __GICV2_H__ |
| 8 | #define __GICV2_H__ |
| 9 | |
| 10 | /******************************************************************************* |
| 11 | * GICv2 miscellaneous definitions |
| 12 | ******************************************************************************/ |
| 13 | /* Interrupt IDs reported by the HPPIR and IAR registers */ |
| 14 | #define PENDING_G1_INTID 1022 |
| 15 | |
| 16 | /******************************************************************************* |
| 17 | * GICv2 specific Distributor interface register offsets and constants. |
| 18 | ******************************************************************************/ |
| 19 | #define GICD_ITARGETSR 0x800 |
| 20 | #define GICD_SGIR 0xF00 |
| 21 | #define GICD_CPENDSGIR 0xF10 |
| 22 | #define GICD_SPENDSGIR 0xF20 |
| 23 | #define GICD_PIDR2_GICV2 0xFE8 |
| 24 | |
| 25 | #define ITARGETSR_SHIFT 2 |
| 26 | #define GIC_TARGET_CPU_MASK 0xff |
| 27 | |
| 28 | #define CPENDSGIR_SHIFT 2 |
| 29 | #define SPENDSGIR_SHIFT CPENDSGIR_SHIFT |
| 30 | |
| 31 | /******************************************************************************* |
| 32 | * GICv2 specific CPU interface register offsets and constants. |
| 33 | ******************************************************************************/ |
| 34 | /* Physical CPU Interface registers */ |
| 35 | #define GICC_CTLR 0x0 |
| 36 | #define GICC_PMR 0x4 |
| 37 | #define GICC_BPR 0x8 |
| 38 | #define GICC_IAR 0xC |
| 39 | #define GICC_EOIR 0x10 |
| 40 | #define GICC_RPR 0x14 |
| 41 | #define GICC_HPPIR 0x18 |
| 42 | #define GICC_AHPPIR 0x28 |
| 43 | #define GICC_IIDR 0xFC |
| 44 | #define GICC_DIR 0x1000 |
| 45 | #define GICC_PRIODROP GICC_EOIR |
| 46 | |
| 47 | /* GICC_CTLR bit definitions */ |
| 48 | #define EOI_MODE_NS (1 << 10) |
| 49 | #define EOI_MODE_S (1 << 9) |
| 50 | #define IRQ_BYP_DIS_GRP1 (1 << 8) |
| 51 | #define FIQ_BYP_DIS_GRP1 (1 << 7) |
| 52 | #define IRQ_BYP_DIS_GRP0 (1 << 6) |
| 53 | #define FIQ_BYP_DIS_GRP0 (1 << 5) |
| 54 | #define CBPR (1 << 4) |
| 55 | #define FIQ_EN_SHIFT 3 |
| 56 | #define FIQ_EN_BIT (1 << FIQ_EN_SHIFT) |
| 57 | #define ACK_CTL (1 << 2) |
| 58 | |
| 59 | /* GICC_IIDR bit masks and shifts */ |
| 60 | #define GICC_IIDR_PID_SHIFT 20 |
| 61 | #define GICC_IIDR_ARCH_SHIFT 16 |
| 62 | #define GICC_IIDR_REV_SHIFT 12 |
| 63 | #define GICC_IIDR_IMP_SHIFT 0 |
| 64 | |
| 65 | #define GICC_IIDR_PID_MASK 0xfff |
| 66 | #define GICC_IIDR_ARCH_MASK 0xf |
| 67 | #define GICC_IIDR_REV_MASK 0xf |
| 68 | #define GICC_IIDR_IMP_MASK 0xfff |
| 69 | |
| 70 | /* HYP view virtual CPU Interface registers */ |
| 71 | #define GICH_CTL 0x0 |
| 72 | #define GICH_VTR 0x4 |
| 73 | #define GICH_ELRSR0 0x30 |
| 74 | #define GICH_ELRSR1 0x34 |
| 75 | #define GICH_APR0 0xF0 |
| 76 | #define GICH_LR_BASE 0x100 |
| 77 | |
| 78 | /* Virtual CPU Interface registers */ |
| 79 | #define GICV_CTL 0x0 |
| 80 | #define GICV_PRIMASK 0x4 |
| 81 | #define GICV_BP 0x8 |
| 82 | #define GICV_INTACK 0xC |
| 83 | #define GICV_EOI 0x10 |
| 84 | #define GICV_RUNNINGPRI 0x14 |
| 85 | #define GICV_HIGHESTPEND 0x18 |
| 86 | #define GICV_DEACTIVATE 0x1000 |
| 87 | |
| 88 | /* GICD_CTLR bit definitions */ |
| 89 | #define CTLR_ENABLE_G1_SHIFT 1 |
| 90 | #define CTLR_ENABLE_G1_MASK 0x1 |
| 91 | #define CTLR_ENABLE_G1_BIT (1 << CTLR_ENABLE_G1_SHIFT) |
| 92 | |
| 93 | /* Interrupt ID mask for HPPIR, AHPPIR, IAR and AIAR CPU Interface registers */ |
| 94 | #define INT_ID_MASK 0x3ff |
| 95 | |
| 96 | #ifndef __ASSEMBLY__ |
| 97 | |
| 98 | #include <stdint.h> |
| 99 | |
| 100 | /******************************************************************************* |
| 101 | * This structure describes some of the implementation defined attributes of |
| 102 | * the GICv2 IP. It is used by the platform port to specify these attributes |
| 103 | * in order to initialize the GICv2 driver. The attributes are described |
| 104 | * below. |
| 105 | * |
| 106 | * 1. The 'gicd_base' field contains the base address of the Distributor |
| 107 | * interface programmer's view. |
| 108 | * |
| 109 | * 2. The 'gicc_base' field contains the base address of the CPU Interface |
| 110 | * programmer's view. |
| 111 | * |
| 112 | * 3. The 'g0_interrupt_array' field is a pointer to an array in which each |
| 113 | * entry corresponds to an ID of a Group 0 interrupt. |
| 114 | * |
| 115 | * 4. The 'g0_interrupt_num' field contains the number of entries in the |
| 116 | * 'g0_interrupt_array'. |
| 117 | ******************************************************************************/ |
| 118 | typedef struct gicv2_driver_data { |
| 119 | uintptr_t gicd_base; |
| 120 | uintptr_t gicc_base; |
| 121 | unsigned int g0_interrupt_num; |
| 122 | const unsigned int *g0_interrupt_array; |
| 123 | } gicv2_driver_data_t; |
| 124 | |
| 125 | /******************************************************************************* |
| 126 | * Function prototypes |
| 127 | ******************************************************************************/ |
| 128 | void gicv2_driver_init(const gicv2_driver_data_t *plat_driver_data); |
| 129 | void gicv2_distif_init(void); |
| 130 | void gicv2_pcpu_distif_init(void); |
| 131 | void gicv2_cpuif_enable(void); |
| 132 | void gicv2_cpuif_disable(void); |
| 133 | unsigned int gicv2_is_fiq_enabled(void); |
| 134 | unsigned int gicv2_get_pending_interrupt_type(void); |
| 135 | unsigned int gicv2_get_pending_interrupt_id(void); |
| 136 | unsigned int gicv2_acknowledge_interrupt(void); |
| 137 | void gicv2_end_of_interrupt(unsigned int id); |
| 138 | unsigned int gicv2_get_interrupt_group(unsigned int id); |
| 139 | |
| 140 | #endif /* __ASSEMBLY__ */ |
| 141 | #endif /* __GICV2_H__ */ |