plat/rockchip/rk3399/drivers/m0/src/dram.c

/*
 * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * Redistributions of source code must retain the above copyright notice, this
 * list of conditions and the following disclaimer.
 *
 * Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * Neither the name of ARM nor the names of its contributors may be used
 * to endorse or promote products derived from this software without specific
 * prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#include <m0_param.h>
#include "rk3399_mcu.h"

/* PMU */
#define PMU_PWRDN_ST		0x18
#define PMU_BUS_IDLE_REQ	0x60
#define PMU_BUS_IDLE_ST		0x64
#define PMU_NOC_AUTO_ENA	0xd8

/* PMU_BUS_IDLE_REQ */
#define IDLE_REQ_MSCH1		(1 << 19)
#define IDLE_REQ_MSCH0		(1 << 18)

/* #define PMU_BUS_IDLE_ST */
#define IDLE_MSCH1		(1 << 19)
#define IDLE_MSCH0		(1 << 18)

/* CRU */
#define CRU_DPLL_CON0		0x40
#define CRU_DPLL_CON1		0x44
#define CRU_DPLL_CON2		0x48
#define CRU_DPLL_CON3		0x4c
#define CRU_DPLL_CON4		0x50
#define CRU_DPLL_CON5		0x54

#define CRU_DPLL_CON2		0x48
#define CRU_DPLL_CON3		0x4c
#define CRU_CLKGATE10_CON	0x328
#define CRU_CLKGATE28_CON	0x370

/* CRU_PLL_CON3 */
#define PLL_SLOW_MODE		0
#define PLL_NORMAL_MODE		1
#define PLL_MODE(n)		((0x3 << (8 + 16)) | ((n) << 8))
#define PLL_POWER_DOWN(n)	((0x1 << (0 + 16)) | ((n) << 0))

/* PMU CRU */
#define PMU_CRU_GATEDIS_CON0	0x130

/* CIC */
#define CIC_CTRL0		0
#define CIC_CTRL1		0x4
#define CIC_STATUS0		0x10

uint32_t gatedis_con0;

static void idle_port(void)
{
	gatedis_con0 = mmio_read_32(PMU_CRU_BASE_ADDR + PMU_CRU_GATEDIS_CON0);
	mmio_write_32(PMU_CRU_BASE_ADDR + PMU_CRU_GATEDIS_CON0, 0x3fffffff);
	mmio_setbits_32(PMU_BASE + PMU_BUS_IDLE_REQ,
			IDLE_REQ_MSCH0 | IDLE_REQ_MSCH1);
	while ((mmio_read_32(PMU_BASE + PMU_BUS_IDLE_ST) &
		(IDLE_MSCH1 | IDLE_MSCH0)) != (IDLE_MSCH1 | IDLE_MSCH0))
		continue;
}

static void deidle_port(void)
{
	mmio_clrbits_32(PMU_BASE + PMU_BUS_IDLE_REQ,
			IDLE_REQ_MSCH0 | IDLE_REQ_MSCH1);
	while (mmio_read_32(PMU_BASE + PMU_BUS_IDLE_ST) &
	       (IDLE_MSCH1 | IDLE_MSCH0))
		continue;

	/* document is wrong, PMU_CRU_GATEDIS_CON0 do not need set MASK BIT */
	mmio_write_32(PMU_CRU_BASE_ADDR + PMU_CRU_GATEDIS_CON0, gatedis_con0);
}

static void ddr_set_pll(void)
{
	mmio_write_32(CRU_BASE_ADDR + CRU_DPLL_CON3, PLL_MODE(PLL_SLOW_MODE));

	mmio_write_32(CRU_BASE_ADDR + CRU_DPLL_CON3, PLL_POWER_DOWN(1));
	mmio_write_32(CRU_BASE_ADDR + CRU_DPLL_CON0,
		      mmio_read_32(PARAM_ADDR + PARAM_DPLL_CON0));
	mmio_write_32(CRU_BASE_ADDR + CRU_DPLL_CON1,
		      mmio_read_32(PARAM_ADDR + PARAM_DPLL_CON1));
	mmio_write_32(CRU_BASE_ADDR + CRU_DPLL_CON3, PLL_POWER_DOWN(0));

	while ((mmio_read_32(CRU_BASE_ADDR + CRU_DPLL_CON2) & (1u << 31)) == 0)
		continue;

	mmio_write_32(CRU_BASE_ADDR + CRU_DPLL_CON3, PLL_MODE(PLL_NORMAL_MODE));
}

void handle_dram(void)
{
	idle_port();

	mmio_write_32(CIC_BASE_ADDR + CIC_CTRL0,
		      (((0x3 << 4) | (1 << 2) | 1) << 16) |
		      (1 << 2) | 1 |
		      mmio_read_32(PARAM_ADDR + PARAM_FREQ_SELECT));
	while ((mmio_read_32(CIC_BASE_ADDR + CIC_STATUS0) & (1 << 2)) == 0)
		continue;

	ddr_set_pll();
	mmio_write_32(CIC_BASE_ADDR + CIC_CTRL0, 0x20002);
	while ((mmio_read_32(CIC_BASE_ADDR + CIC_STATUS0) & (1 << 0)) == 0)
		continue;

	deidle_port();
}