| /* |
| * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| * |
| * Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * Neither the name of ARM nor the names of its contributors may be used |
| * to endorse or promote products derived from this software without specific |
| * prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <m0_param.h> |
| #include "rk3399_mcu.h" |
| |
| /* PMU */ |
| #define PMU_PWRDN_ST 0x18 |
| #define PMU_BUS_IDLE_REQ 0x60 |
| #define PMU_BUS_IDLE_ST 0x64 |
| #define PMU_NOC_AUTO_ENA 0xd8 |
| |
| /* PMU_BUS_IDLE_REQ */ |
| #define IDLE_REQ_MSCH1 (1 << 19) |
| #define IDLE_REQ_MSCH0 (1 << 18) |
| |
| /* #define PMU_BUS_IDLE_ST */ |
| #define IDLE_MSCH1 (1 << 19) |
| #define IDLE_MSCH0 (1 << 18) |
| |
| /* CRU */ |
| #define CRU_DPLL_CON0 0x40 |
| #define CRU_DPLL_CON1 0x44 |
| #define CRU_DPLL_CON2 0x48 |
| #define CRU_DPLL_CON3 0x4c |
| #define CRU_DPLL_CON4 0x50 |
| #define CRU_DPLL_CON5 0x54 |
| |
| #define CRU_DPLL_CON2 0x48 |
| #define CRU_DPLL_CON3 0x4c |
| #define CRU_CLKGATE10_CON 0x328 |
| #define CRU_CLKGATE28_CON 0x370 |
| |
| /* CRU_PLL_CON3 */ |
| #define PLL_SLOW_MODE 0 |
| #define PLL_NORMAL_MODE 1 |
| #define PLL_MODE(n) ((0x3 << (8 + 16)) | ((n) << 8)) |
| #define PLL_POWER_DOWN(n) ((0x1 << (0 + 16)) | ((n) << 0)) |
| |
| /* PMU CRU */ |
| #define PMU_CRU_GATEDIS_CON0 0x130 |
| |
| /* CIC */ |
| #define CIC_CTRL0 0 |
| #define CIC_CTRL1 0x4 |
| #define CIC_STATUS0 0x10 |
| |
| uint32_t gatedis_con0; |
| |
| static void idle_port(void) |
| { |
| gatedis_con0 = mmio_read_32(PMU_CRU_BASE_ADDR + PMU_CRU_GATEDIS_CON0); |
| mmio_write_32(PMU_CRU_BASE_ADDR + PMU_CRU_GATEDIS_CON0, 0x3fffffff); |
| mmio_setbits_32(PMU_BASE + PMU_BUS_IDLE_REQ, |
| IDLE_REQ_MSCH0 | IDLE_REQ_MSCH1); |
| while ((mmio_read_32(PMU_BASE + PMU_BUS_IDLE_ST) & |
| (IDLE_MSCH1 | IDLE_MSCH0)) != (IDLE_MSCH1 | IDLE_MSCH0)) |
| continue; |
| } |
| |
| static void deidle_port(void) |
| { |
| mmio_clrbits_32(PMU_BASE + PMU_BUS_IDLE_REQ, |
| IDLE_REQ_MSCH0 | IDLE_REQ_MSCH1); |
| while (mmio_read_32(PMU_BASE + PMU_BUS_IDLE_ST) & |
| (IDLE_MSCH1 | IDLE_MSCH0)) |
| continue; |
| |
| /* document is wrong, PMU_CRU_GATEDIS_CON0 do not need set MASK BIT */ |
| mmio_write_32(PMU_CRU_BASE_ADDR + PMU_CRU_GATEDIS_CON0, gatedis_con0); |
| } |
| |
| static void ddr_set_pll(void) |
| { |
| mmio_write_32(CRU_BASE_ADDR + CRU_DPLL_CON3, PLL_MODE(PLL_SLOW_MODE)); |
| |
| mmio_write_32(CRU_BASE_ADDR + CRU_DPLL_CON3, PLL_POWER_DOWN(1)); |
| mmio_write_32(CRU_BASE_ADDR + CRU_DPLL_CON0, |
| mmio_read_32(PARAM_ADDR + PARAM_DPLL_CON0)); |
| mmio_write_32(CRU_BASE_ADDR + CRU_DPLL_CON1, |
| mmio_read_32(PARAM_ADDR + PARAM_DPLL_CON1)); |
| mmio_write_32(CRU_BASE_ADDR + CRU_DPLL_CON3, PLL_POWER_DOWN(0)); |
| |
| while ((mmio_read_32(CRU_BASE_ADDR + CRU_DPLL_CON2) & (1u << 31)) == 0) |
| continue; |
| |
| mmio_write_32(CRU_BASE_ADDR + CRU_DPLL_CON3, PLL_MODE(PLL_NORMAL_MODE)); |
| } |
| |
| void handle_dram(void) |
| { |
| idle_port(); |
| |
| mmio_write_32(CIC_BASE_ADDR + CIC_CTRL0, |
| (((0x3 << 4) | (1 << 2) | 1) << 16) | |
| (1 << 2) | 1 | |
| mmio_read_32(PARAM_ADDR + PARAM_FREQ_SELECT)); |
| while ((mmio_read_32(CIC_BASE_ADDR + CIC_STATUS0) & (1 << 2)) == 0) |
| continue; |
| |
| ddr_set_pll(); |
| mmio_write_32(CIC_BASE_ADDR + CIC_CTRL0, 0x20002); |
| while ((mmio_read_32(CIC_BASE_ADDR + CIC_STATUS0) & (1 << 0)) == 0) |
| continue; |
| |
| deidle_port(); |
| } |