blob: d5d28a548d84d31d48b496a36e2851fd37c1bf18 [file] [log] [blame]
Yatharth Kochar51f76f62016-09-12 16:10:33 +01001/*
2 * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
3 *
dp-armfa3cf0b2017-05-03 09:38:09 +01004 * SPDX-License-Identifier: BSD-3-Clause
Yatharth Kochar51f76f62016-09-12 16:10:33 +01005 */
6
7#include <arch.h>
8#include <arch_helpers.h>
9#include <assert.h>
10#include <auth_mod.h>
11#include <bl_common.h>
12#include <debug.h>
13#include <errno.h>
14#include <platform.h>
15#include <platform_def.h>
16#include <stdint.h>
17
18/*
19 * Check for platforms that use obsolete image terminology
20 */
21#ifdef BL30_BASE
22# error "BL30_BASE platform define no longer used - please use SCP_BL2_BASE"
23#endif
24
25/*******************************************************************************
26 * Load the SCP_BL2 image if there's one.
27 * If a platform does not want to attempt to load SCP_BL2 image it must leave
28 * SCP_BL2_BASE undefined.
29 * Return 0 on success or if there's no SCP_BL2 image to load, a negative error
30 * code otherwise.
31 ******************************************************************************/
32static int load_scp_bl2(void)
33{
34 int e = 0;
35#ifdef SCP_BL2_BASE
36 meminfo_t scp_bl2_mem_info;
37 image_info_t scp_bl2_image_info;
38
39 /*
40 * It is up to the platform to specify where SCP_BL2 should be loaded if
41 * it exists. It could create space in the secure sram or point to a
42 * completely different memory.
43 *
44 * The entry point information is not relevant in this case as the AP
45 * won't execute the SCP_BL2 image.
46 */
47 INFO("BL2: Loading SCP_BL2\n");
48 bl2_plat_get_scp_bl2_meminfo(&scp_bl2_mem_info);
49 scp_bl2_image_info.h.version = VERSION_1;
50 e = load_auth_image(&scp_bl2_mem_info,
51 SCP_BL2_IMAGE_ID,
52 SCP_BL2_BASE,
53 &scp_bl2_image_info,
54 NULL);
55
56 if (e == 0) {
57 /* The subsequent handling of SCP_BL2 is platform specific */
58 e = bl2_plat_handle_scp_bl2(&scp_bl2_image_info);
59 if (e) {
60 ERROR("Failure in platform-specific handling of SCP_BL2 image.\n");
61 }
62 }
63#endif /* SCP_BL2_BASE */
64
65 return e;
66}
67
68#ifndef EL3_PAYLOAD_BASE
69/*******************************************************************************
70 * Load the BL31 image.
71 * The bl2_to_bl31_params and bl31_ep_info params will be updated with the
72 * relevant BL31 information.
73 * Return 0 on success, a negative error code otherwise.
74 ******************************************************************************/
75static int load_bl31(bl31_params_t *bl2_to_bl31_params,
76 entry_point_info_t *bl31_ep_info)
77{
78 meminfo_t *bl2_tzram_layout;
79 int e;
80
81 INFO("BL2: Loading BL31\n");
82 assert(bl2_to_bl31_params != NULL);
83 assert(bl31_ep_info != NULL);
84
85 /* Find out how much free trusted ram remains after BL2 load */
86 bl2_tzram_layout = bl2_plat_sec_mem_layout();
87
88 /* Set the X0 parameter to BL31 */
89 bl31_ep_info->args.arg0 = (unsigned long)bl2_to_bl31_params;
90
91 /* Load the BL31 image */
92 e = load_auth_image(bl2_tzram_layout,
93 BL31_IMAGE_ID,
94 BL31_BASE,
95 bl2_to_bl31_params->bl31_image_info,
96 bl31_ep_info);
97
98 if (e == 0) {
99 bl2_plat_set_bl31_ep_info(bl2_to_bl31_params->bl31_image_info,
100 bl31_ep_info);
101 }
102
103 return e;
104}
105
106/*******************************************************************************
107 * Load the BL32 image if there's one.
108 * The bl2_to_bl31_params param will be updated with the relevant BL32
109 * information.
110 * If a platform does not want to attempt to load BL32 image it must leave
111 * BL32_BASE undefined.
112 * Return 0 on success or if there's no BL32 image to load, a negative error
113 * code otherwise.
114 ******************************************************************************/
115static int load_bl32(bl31_params_t *bl2_to_bl31_params)
116{
117 int e = 0;
118#ifdef BL32_BASE
119 meminfo_t bl32_mem_info;
120
121 INFO("BL2: Loading BL32\n");
122 assert(bl2_to_bl31_params != NULL);
123
124 /*
125 * It is up to the platform to specify where BL32 should be loaded if
126 * it exists. It could create space in the secure sram or point to a
127 * completely different memory.
128 */
129 bl2_plat_get_bl32_meminfo(&bl32_mem_info);
130 e = load_auth_image(&bl32_mem_info,
131 BL32_IMAGE_ID,
132 BL32_BASE,
133 bl2_to_bl31_params->bl32_image_info,
134 bl2_to_bl31_params->bl32_ep_info);
135
136 if (e == 0) {
137 bl2_plat_set_bl32_ep_info(
138 bl2_to_bl31_params->bl32_image_info,
139 bl2_to_bl31_params->bl32_ep_info);
140 }
141#endif /* BL32_BASE */
142
143 return e;
144}
145
146#ifndef PRELOADED_BL33_BASE
147/*******************************************************************************
148 * Load the BL33 image.
149 * The bl2_to_bl31_params param will be updated with the relevant BL33
150 * information.
151 * Return 0 on success, a negative error code otherwise.
152 ******************************************************************************/
153static int load_bl33(bl31_params_t *bl2_to_bl31_params)
154{
155 meminfo_t bl33_mem_info;
156 int e;
157
158 INFO("BL2: Loading BL33\n");
159 assert(bl2_to_bl31_params != NULL);
160
161 bl2_plat_get_bl33_meminfo(&bl33_mem_info);
162
163 /* Load the BL33 image in non-secure memory provided by the platform */
164 e = load_auth_image(&bl33_mem_info,
165 BL33_IMAGE_ID,
166 plat_get_ns_image_entrypoint(),
167 bl2_to_bl31_params->bl33_image_info,
168 bl2_to_bl31_params->bl33_ep_info);
169
170 if (e == 0) {
171 bl2_plat_set_bl33_ep_info(bl2_to_bl31_params->bl33_image_info,
172 bl2_to_bl31_params->bl33_ep_info);
173 }
174
175 return e;
176}
177#endif /* PRELOADED_BL33_BASE */
178
179#endif /* EL3_PAYLOAD_BASE */
180
181/*******************************************************************************
182 * This function loads SCP_BL2/BL3x images and returns the ep_info for
183 * the next executable image.
184 ******************************************************************************/
185entry_point_info_t *bl2_load_images(void)
186{
187 bl31_params_t *bl2_to_bl31_params;
188 entry_point_info_t *bl31_ep_info;
189 int e;
190
191 e = load_scp_bl2();
192 if (e) {
193 ERROR("Failed to load SCP_BL2 (%i)\n", e);
194 plat_error_handler(e);
195 }
196
197 /* Perform platform setup in BL2 after loading SCP_BL2 */
198 bl2_platform_setup();
199
200 /*
201 * Get a pointer to the memory the platform has set aside to pass
202 * information to BL31.
203 */
204 bl2_to_bl31_params = bl2_plat_get_bl31_params();
205 bl31_ep_info = bl2_plat_get_bl31_ep_info();
206
207#ifdef EL3_PAYLOAD_BASE
208 /*
209 * In the case of an EL3 payload, we don't need to load any further
210 * images. Just update the BL31 entrypoint info structure to make BL1
211 * jump to the EL3 payload.
212 * The pointer to the memory the platform has set aside to pass
213 * information to BL31 in the normal boot flow is reused here, even
214 * though only a fraction of the information contained in the
215 * bl31_params_t structure makes sense in the context of EL3 payloads.
216 * This will be refined in the future.
217 */
218 INFO("BL2: Populating the entrypoint info for the EL3 payload\n");
219 bl31_ep_info->pc = EL3_PAYLOAD_BASE;
220 bl31_ep_info->args.arg0 = (unsigned long) bl2_to_bl31_params;
221 bl2_plat_set_bl31_ep_info(NULL, bl31_ep_info);
222#else
223 e = load_bl31(bl2_to_bl31_params, bl31_ep_info);
224 if (e) {
225 ERROR("Failed to load BL31 (%i)\n", e);
226 plat_error_handler(e);
227 }
228
229 e = load_bl32(bl2_to_bl31_params);
230 if (e) {
231 if (e == -EAUTH) {
232 ERROR("Failed to authenticate BL32\n");
233 plat_error_handler(e);
234 } else {
235 WARN("Failed to load BL32 (%i)\n", e);
236 }
237 }
238
239#ifdef PRELOADED_BL33_BASE
240 /*
241 * In this case, don't load the BL33 image as it's already loaded in
242 * memory. Update BL33 entrypoint information.
243 */
244 INFO("BL2: Populating the entrypoint info for the preloaded BL33\n");
245 bl2_to_bl31_params->bl33_ep_info->pc = PRELOADED_BL33_BASE;
246 bl2_plat_set_bl33_ep_info(NULL, bl2_to_bl31_params->bl33_ep_info);
247#else
248 e = load_bl33(bl2_to_bl31_params);
249 if (e) {
250 ERROR("Failed to load BL33 (%i)\n", e);
251 plat_error_handler(e);
252 }
253#endif /* PRELOADED_BL33_BASE */
254
255#endif /* EL3_PAYLOAD_BASE */
256
257 /* Flush the params to be passed to memory */
258 bl2_plat_flush_bl31_params();
259
260 return bl31_ep_info;
261}