developer | beab2d7 | 2020-10-14 20:14:37 +0800 | [diff] [blame] | 1 | /* |
developer | fe14b9f | 2022-09-05 11:18:04 +0800 | [diff] [blame] | 2 | * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved. |
developer | beab2d7 | 2020-10-14 20:14:37 +0800 | [diff] [blame] | 3 | * |
| 4 | * SPDX-License-Identifier: BSD-3-Clause |
| 5 | */ |
| 6 | |
| 7 | #include <common/debug.h> |
| 8 | #include <drivers/delay_timer.h> |
| 9 | #include <rtc.h> |
| 10 | |
| 11 | |
| 12 | static void RTC_Config_Interface(uint32_t addr, uint16_t data, |
| 13 | uint16_t mask, uint16_t shift) |
| 14 | { |
| 15 | uint16_t pmic_reg; |
| 16 | |
| 17 | pmic_reg = RTC_Read(addr); |
| 18 | |
| 19 | pmic_reg &= ~(mask << shift); |
| 20 | pmic_reg |= (data << shift); |
| 21 | |
| 22 | RTC_Write(addr, pmic_reg); |
| 23 | } |
| 24 | |
| 25 | static int32_t rtc_disable_2sec_reboot(void) |
| 26 | { |
| 27 | uint16_t reboot; |
| 28 | |
| 29 | reboot = (RTC_Read(RTC_AL_SEC) & ~RTC_BBPU_2SEC_EN) & |
| 30 | ~RTC_BBPU_AUTO_PDN_SEL; |
| 31 | RTC_Write(RTC_AL_SEC, reboot); |
| 32 | |
| 33 | return RTC_Write_Trigger(); |
| 34 | } |
| 35 | |
| 36 | static int32_t rtc_enable_k_eosc(void) |
| 37 | { |
| 38 | uint16_t alm_dow, alm_sec; |
| 39 | int16_t ret; |
| 40 | |
| 41 | /* Turning on eosc cali mode clock */ |
| 42 | RTC_Config_Interface(PMIC_RG_SCK_TOP_CKPDN_CON0_CLR, 1, |
| 43 | PMIC_RG_RTC_EOSC32_CK_PDN_MASK, |
| 44 | PMIC_RG_RTC_EOSC32_CK_PDN_SHIFT); |
| 45 | |
| 46 | alm_sec = RTC_Read(RTC_AL_SEC) & (~RTC_LPD_OPT_MASK); |
| 47 | RTC_Write(RTC_AL_SEC, alm_sec); |
| 48 | ret = RTC_Write_Trigger(); |
| 49 | if (ret == 0) { |
| 50 | return 0; |
| 51 | } |
| 52 | |
| 53 | RTC_Write(RTC_CON, RTC_LPD_EN); |
| 54 | ret = RTC_Write_Trigger(); |
| 55 | if (ret == 0) { |
| 56 | return 0; |
| 57 | } |
| 58 | |
| 59 | RTC_Write(RTC_CON, RTC_LPD_RST); |
| 60 | ret = RTC_Write_Trigger(); |
| 61 | if (ret == 0) { |
| 62 | return 0; |
| 63 | } |
| 64 | |
| 65 | RTC_Write(RTC_CON, RTC_LPD_EN); |
| 66 | ret = RTC_Write_Trigger(); |
| 67 | if (ret == 0) { |
| 68 | return 0; |
| 69 | } |
| 70 | |
| 71 | RTC_Write(RTC_POWERKEY1, RTC_POWERKEY1_KEY); |
| 72 | RTC_Write(RTC_POWERKEY2, RTC_POWERKEY2_KEY); |
| 73 | ret = RTC_Write_Trigger(); |
| 74 | if (ret == 0) { |
| 75 | return 0; |
| 76 | } |
| 77 | |
| 78 | /* set RTC EOSC calibration period = 8sec */ |
| 79 | alm_dow = (RTC_Read(RTC_AL_DOW) & (~RTC_RG_EOSC_CALI_TD_MASK)) | |
| 80 | RTC_RG_EOSC_CALI_TD_8SEC; |
| 81 | RTC_Write(RTC_AL_DOW, alm_dow); |
| 82 | ret = RTC_Write_Trigger(); |
| 83 | if (ret == 0) { |
| 84 | return 0; |
| 85 | } |
| 86 | |
| 87 | RTC_Write(RTC_BBPU, |
| 88 | RTC_Read(RTC_BBPU) | RTC_BBPU_KEY | RTC_BBPU_RELOAD); |
| 89 | ret = RTC_Write_Trigger(); |
| 90 | if (ret == 0) { |
| 91 | return 0; |
| 92 | } |
| 93 | |
| 94 | /* Enable K EOSC mode :use solution1 of eosc cali to fix mt6359p 32K*/ |
| 95 | RTC_Write(RTC_AL_YEA, (((RTC_Read(RTC_AL_YEA) | RTC_K_EOSC_RSV_0) |
| 96 | & (~RTC_K_EOSC_RSV_1)) | (RTC_K_EOSC_RSV_2))); |
| 97 | ret = RTC_Write_Trigger(); |
| 98 | if (ret == 0) { |
| 99 | return 0; |
| 100 | } |
| 101 | |
| 102 | INFO("[RTC] RTC_enable_k_eosc\n"); |
| 103 | |
| 104 | return 1; |
| 105 | } |
| 106 | |
| 107 | void rtc_power_off_sequence(void) |
| 108 | { |
| 109 | uint16_t bbpu; |
| 110 | int16_t ret; |
| 111 | |
| 112 | ret = rtc_disable_2sec_reboot(); |
| 113 | if (ret == 0) { |
| 114 | return; |
| 115 | } |
| 116 | |
| 117 | ret = rtc_enable_k_eosc(); |
| 118 | if (ret == 0) { |
| 119 | return; |
| 120 | } |
| 121 | |
| 122 | bbpu = RTC_BBPU_KEY | RTC_BBPU_PWREN; |
| 123 | |
| 124 | if (Writeif_unlock() != 0) { |
| 125 | RTC_Write(RTC_BBPU, |
| 126 | bbpu | RTC_BBPU_RESET_ALARM | RTC_BBPU_RESET_SPAR); |
| 127 | RTC_Write(RTC_AL_MASK, RTC_AL_MASK_DOW); |
| 128 | ret = RTC_Write_Trigger(); |
| 129 | if (ret == 0) { |
| 130 | return; |
| 131 | } |
| 132 | mdelay(1); |
| 133 | |
| 134 | bbpu = RTC_Read(RTC_BBPU); |
| 135 | |
| 136 | if (((bbpu & RTC_BBPU_RESET_ALARM) > 0) || |
| 137 | ((bbpu & RTC_BBPU_RESET_SPAR) > 0)) { |
| 138 | INFO("[RTC] timeout\n"); |
| 139 | } |
| 140 | |
| 141 | bbpu = RTC_Read(RTC_BBPU) | RTC_BBPU_KEY | RTC_BBPU_RELOAD; |
| 142 | RTC_Write(RTC_BBPU, bbpu); |
| 143 | ret = RTC_Write_Trigger(); |
| 144 | if (ret == 0) { |
| 145 | return; |
| 146 | } |
| 147 | } |
| 148 | } |