blob: bd62614549640c47e098dbf1f4227676c573922d [file] [log] [blame]
#
# Copyright (c) 2018-2022, Arm Limited. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
N1SDP_BASE := plat/arm/board/n1sdp
INTERCONNECT_SOURCES := ${N1SDP_BASE}/n1sdp_interconnect.c
PLAT_INCLUDES := -I${N1SDP_BASE}/include
N1SDP_CPU_SOURCES := lib/cpus/aarch64/neoverse_n1.S
# GIC-600 configuration
GICV3_SUPPORT_GIC600 := 1
GICV3_IMPL_GIC600_MULTICHIP := 1
# Include GICv3 driver files
include drivers/arm/gic/v3/gicv3.mk
N1SDP_GIC_SOURCES := ${GICV3_SOURCES} \
plat/common/plat_gicv3.c \
plat/arm/common/arm_gicv3.c \
PLAT_BL_COMMON_SOURCES := ${N1SDP_BASE}/n1sdp_plat.c \
${N1SDP_BASE}/aarch64/n1sdp_helper.S
BL1_SOURCES := ${N1SDP_CPU_SOURCES} \
${INTERCONNECT_SOURCES} \
${N1SDP_BASE}/n1sdp_err.c \
${N1SDP_BASE}/n1sdp_trusted_boot.c \
${N1SDP_BASE}/n1sdp_bl1_setup.c \
drivers/arm/sbsa/sbsa.c
BL2_SOURCES := ${N1SDP_BASE}/n1sdp_security.c \
${N1SDP_BASE}/n1sdp_err.c \
${N1SDP_BASE}/n1sdp_trusted_boot.c \
lib/utils/mem_region.c \
${N1SDP_BASE}/n1sdp_bl2_setup.c \
${N1SDP_BASE}/n1sdp_image_load.c \
drivers/arm/css/sds/sds.c
BL31_SOURCES := ${N1SDP_CPU_SOURCES} \
${INTERCONNECT_SOURCES} \
${N1SDP_GIC_SOURCES} \
${N1SDP_BASE}/n1sdp_bl31_setup.c \
${N1SDP_BASE}/n1sdp_pm.c \
${N1SDP_BASE}/n1sdp_topology.c \
${N1SDP_BASE}/n1sdp_security.c \
drivers/arm/css/sds/sds.c
FDT_SOURCES += fdts/${PLAT}-single-chip.dts \
fdts/${PLAT}-multi-chip.dts \
${N1SDP_BASE}/fdts/n1sdp_fw_config.dts \
${N1SDP_BASE}/fdts/n1sdp_tb_fw_config.dts \
${N1SDP_BASE}/fdts/n1sdp_nt_fw_config.dts
FW_CONFIG := ${BUILD_PLAT}/fdts/n1sdp_fw_config.dtb
TB_FW_CONFIG := ${BUILD_PLAT}/fdts/n1sdp_tb_fw_config.dtb
NT_FW_CONFIG := ${BUILD_PLAT}/fdts/n1sdp_nt_fw_config.dtb
# Add the FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config,${FW_CONFIG}))
# Add the TB_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config,${TB_FW_CONFIG}))
# Add the NT_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${NT_FW_CONFIG},--nt-fw-config,${NT_FW_CONFIG}))
N1SDP_SPMC_MANIFEST_DTS := ${N1SDP_BASE}/fdts/${PLAT}_optee_spmc_manifest.dts
FDT_SOURCES += ${N1SDP_SPMC_MANIFEST_DTS}
N1SDP_TOS_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_optee_spmc_manifest.dtb
# Add the TOS_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${N1SDP_TOS_FW_CONFIG},--tos-fw-config,${N1SDP_TOS_FW_CONFIG}))
# Setting to 0 as no NVCTR in N1SDP
N1SDP_FW_NVCTR_VAL := 0
TFW_NVCTR_VAL := ${N1SDP_FW_NVCTR_VAL}
NTFW_NVCTR_VAL := ${N1SDP_FW_NVCTR_VAL}
# Add N1SDP_FW_NVCTR_VAL
$(eval $(call add_define,N1SDP_FW_NVCTR_VAL))
# TF-A not required to load the SCP Images
override CSS_LOAD_SCP_IMAGES := 0
override NEED_BL2U := no
# 32 bit mode not supported
override CTX_INCLUDE_AARCH32_REGS := 0
override ARM_PLAT_MT := 1
# Select SCMI/SDS drivers instead of SCPI/BOM driver for communicating with the
# SCP during power management operations and for SCP RAM Firmware transfer.
CSS_USE_SCMI_SDS_DRIVER := 1
# System coherency is managed in hardware
HW_ASSISTED_COHERENCY := 1
# When building for systems with hardware-assisted coherency, there's no need to
# use USE_COHERENT_MEM. Require that USE_COHERENT_MEM must be set to 0 too.
USE_COHERENT_MEM := 0
# Enable the flag since N1SDP has a system level cache
NEOVERSE_Nx_EXTERNAL_LLC := 1
include plat/arm/common/arm_common.mk
include plat/arm/css/common/css_common.mk
include plat/arm/board/common/board_common.mk