| /* |
| * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <common/debug.h> |
| #include <drivers/delay_timer.h> |
| #include <rtc.h> |
| |
| |
| static void RTC_Config_Interface(uint32_t addr, uint16_t data, |
| uint16_t mask, uint16_t shift) |
| { |
| uint16_t pmic_reg; |
| |
| pmic_reg = RTC_Read(addr); |
| |
| pmic_reg &= ~(mask << shift); |
| pmic_reg |= (data << shift); |
| |
| RTC_Write(addr, pmic_reg); |
| } |
| |
| static int32_t rtc_disable_2sec_reboot(void) |
| { |
| uint16_t reboot; |
| |
| reboot = (RTC_Read(RTC_AL_SEC) & ~RTC_BBPU_2SEC_EN) & |
| ~RTC_BBPU_AUTO_PDN_SEL; |
| RTC_Write(RTC_AL_SEC, reboot); |
| |
| return RTC_Write_Trigger(); |
| } |
| |
| static int32_t rtc_enable_k_eosc(void) |
| { |
| uint16_t alm_dow, alm_sec; |
| int16_t ret; |
| |
| /* Turning on eosc cali mode clock */ |
| RTC_Config_Interface(PMIC_RG_SCK_TOP_CKPDN_CON0_CLR, 1, |
| PMIC_RG_RTC_EOSC32_CK_PDN_MASK, |
| PMIC_RG_RTC_EOSC32_CK_PDN_SHIFT); |
| |
| alm_sec = RTC_Read(RTC_AL_SEC) & (~RTC_LPD_OPT_MASK); |
| RTC_Write(RTC_AL_SEC, alm_sec); |
| ret = RTC_Write_Trigger(); |
| if (ret == 0) { |
| return 0; |
| } |
| |
| RTC_Write(RTC_CON, RTC_LPD_EN); |
| ret = RTC_Write_Trigger(); |
| if (ret == 0) { |
| return 0; |
| } |
| |
| RTC_Write(RTC_CON, RTC_LPD_RST); |
| ret = RTC_Write_Trigger(); |
| if (ret == 0) { |
| return 0; |
| } |
| |
| RTC_Write(RTC_CON, RTC_LPD_EN); |
| ret = RTC_Write_Trigger(); |
| if (ret == 0) { |
| return 0; |
| } |
| |
| RTC_Write(RTC_POWERKEY1, RTC_POWERKEY1_KEY); |
| RTC_Write(RTC_POWERKEY2, RTC_POWERKEY2_KEY); |
| ret = RTC_Write_Trigger(); |
| if (ret == 0) { |
| return 0; |
| } |
| |
| /* set RTC EOSC calibration period = 8sec */ |
| alm_dow = (RTC_Read(RTC_AL_DOW) & (~RTC_RG_EOSC_CALI_TD_MASK)) | |
| RTC_RG_EOSC_CALI_TD_8SEC; |
| RTC_Write(RTC_AL_DOW, alm_dow); |
| ret = RTC_Write_Trigger(); |
| if (ret == 0) { |
| return 0; |
| } |
| |
| RTC_Write(RTC_BBPU, |
| RTC_Read(RTC_BBPU) | RTC_BBPU_KEY | RTC_BBPU_RELOAD); |
| ret = RTC_Write_Trigger(); |
| if (ret == 0) { |
| return 0; |
| } |
| |
| /* Enable K EOSC mode :use solution1 of eosc cali to fix mt6359p 32K*/ |
| RTC_Write(RTC_AL_YEA, (((RTC_Read(RTC_AL_YEA) | RTC_K_EOSC_RSV_0) |
| & (~RTC_K_EOSC_RSV_1)) | (RTC_K_EOSC_RSV_2))); |
| ret = RTC_Write_Trigger(); |
| if (ret == 0) { |
| return 0; |
| } |
| |
| INFO("[RTC] RTC_enable_k_eosc\n"); |
| |
| return 1; |
| } |
| |
| void rtc_power_off_sequence(void) |
| { |
| uint16_t bbpu; |
| int16_t ret; |
| |
| ret = rtc_disable_2sec_reboot(); |
| if (ret == 0) { |
| return; |
| } |
| |
| ret = rtc_enable_k_eosc(); |
| if (ret == 0) { |
| return; |
| } |
| |
| bbpu = RTC_BBPU_KEY | RTC_BBPU_PWREN; |
| |
| if (Writeif_unlock() != 0) { |
| RTC_Write(RTC_BBPU, |
| bbpu | RTC_BBPU_RESET_ALARM | RTC_BBPU_RESET_SPAR); |
| RTC_Write(RTC_AL_MASK, RTC_AL_MASK_DOW); |
| ret = RTC_Write_Trigger(); |
| if (ret == 0) { |
| return; |
| } |
| mdelay(1); |
| |
| bbpu = RTC_Read(RTC_BBPU); |
| |
| if (((bbpu & RTC_BBPU_RESET_ALARM) > 0) || |
| ((bbpu & RTC_BBPU_RESET_SPAR) > 0)) { |
| INFO("[RTC] timeout\n"); |
| } |
| |
| bbpu = RTC_Read(RTC_BBPU) | RTC_BBPU_KEY | RTC_BBPU_RELOAD; |
| RTC_Write(RTC_BBPU, bbpu); |
| ret = RTC_Write_Trigger(); |
| if (ret == 0) { |
| return; |
| } |
| } |
| } |