blob: 6b630b9805c37b00983df1c3ec4d30fca1e72923 [file] [log] [blame]
/*
* Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <platform_def.h>
#include <arch.h>
#include <bl1/bl1.h>
#include <common/bl_common.h>
#include <lib/fconf/fconf.h>
#include <lib/fconf/fconf_dyn_cfg_getter.h>
#include <lib/utils.h>
#include <lib/xlat_tables/xlat_tables_compat.h>
#include <plat/arm/common/plat_arm.h>
#include <plat/common/platform.h>
/* Weak definitions may be overridden in specific ARM standard platform */
#pragma weak bl1_early_platform_setup
#pragma weak bl1_plat_arch_setup
#pragma weak bl1_plat_sec_mem_layout
#pragma weak bl1_plat_prepare_exit
#pragma weak bl1_plat_get_next_image_id
#pragma weak plat_arm_bl1_fwu_needed
#define MAP_BL1_TOTAL MAP_REGION_FLAT( \
bl1_tzram_layout.total_base, \
bl1_tzram_layout.total_size, \
MT_MEMORY | MT_RW | MT_SECURE)
/*
* If SEPARATE_CODE_AND_RODATA=1 we define a region for each section
* otherwise one region is defined containing both
*/
#if SEPARATE_CODE_AND_RODATA
#define MAP_BL1_RO MAP_REGION_FLAT( \
BL_CODE_BASE, \
BL1_CODE_END - BL_CODE_BASE, \
MT_CODE | MT_SECURE), \
MAP_REGION_FLAT( \
BL1_RO_DATA_BASE, \
BL1_RO_DATA_END \
- BL_RO_DATA_BASE, \
MT_RO_DATA | MT_SECURE)
#else
#define MAP_BL1_RO MAP_REGION_FLAT( \
BL_CODE_BASE, \
BL1_CODE_END - BL_CODE_BASE, \
MT_CODE | MT_SECURE)
#endif
/* Data structure which holds the extents of the trusted SRAM for BL1*/
static meminfo_t bl1_tzram_layout;
struct meminfo *bl1_plat_sec_mem_layout(void)
{
return &bl1_tzram_layout;
}
/*******************************************************************************
* BL1 specific platform actions shared between ARM standard platforms.
******************************************************************************/
void arm_bl1_early_platform_setup(void)
{
#if !ARM_DISABLE_TRUSTED_WDOG
/* Enable watchdog */
plat_arm_secure_wdt_start();
#endif
/* Initialize the console to provide early debug support */
arm_console_boot_init();
/* Allow BL1 to see the whole Trusted RAM */
bl1_tzram_layout.total_base = ARM_BL_RAM_BASE;
bl1_tzram_layout.total_size = ARM_BL_RAM_SIZE;
}
void bl1_early_platform_setup(void)
{
arm_bl1_early_platform_setup();
/*
* Initialize Interconnect for this cluster during cold boot.
* No need for locks as no other CPU is active.
*/
plat_arm_interconnect_init();
/*
* Enable Interconnect coherency for the primary CPU's cluster.
*/
plat_arm_interconnect_enter_coherency();
}
/******************************************************************************
* Perform the very early platform specific architecture setup shared between
* ARM standard platforms. This only does basic initialization. Later
* architectural setup (bl1_arch_setup()) does not do anything platform
* specific.
*****************************************************************************/
void arm_bl1_plat_arch_setup(void)
{
#if USE_COHERENT_MEM && !ARM_CRYPTOCELL_INTEG
/*
* Ensure ARM platforms don't use coherent memory in BL1 unless
* cryptocell integration is enabled.
*/
assert((BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE) == 0U);
#endif
const mmap_region_t bl_regions[] = {
MAP_BL1_TOTAL,
MAP_BL1_RO,
#if USE_ROMLIB
ARM_MAP_ROMLIB_CODE,
ARM_MAP_ROMLIB_DATA,
#endif
#if ARM_CRYPTOCELL_INTEG
ARM_MAP_BL_COHERENT_RAM,
#endif
{0}
};
setup_page_tables(bl_regions, plat_arm_get_mmap());
#ifdef __aarch64__
enable_mmu_el3(0);
#else
enable_mmu_svc_mon(0);
#endif /* __aarch64__ */
arm_setup_romlib();
}
void bl1_plat_arch_setup(void)
{
arm_bl1_plat_arch_setup();
}
/*
* Perform the platform specific architecture setup shared between
* ARM standard platforms.
*/
void arm_bl1_platform_setup(void)
{
const struct dyn_cfg_dtb_info_t *fw_config_info;
image_desc_t *desc;
uint32_t fw_config_max_size;
int err = -1;
/* Initialise the IO layer and register platform IO devices */
plat_arm_io_setup();
/* Check if we need FWU before further processing */
err = plat_arm_bl1_fwu_needed();
if (err) {
ERROR("Skip platform setup as FWU detected\n");
return;
}
/* Set global DTB info for fixed fw_config information */
fw_config_max_size = ARM_FW_CONFIG_LIMIT - ARM_FW_CONFIG_BASE;
set_fw_config_info(ARM_FW_CONFIG_BASE, fw_config_max_size);
/* Fill the device tree information struct with the info from the config dtb */
err = fconf_load_config(FW_CONFIG_ID);
if (err < 0) {
ERROR("Loading of FW_CONFIG failed %d\n", err);
plat_error_handler(err);
}
/*
* FW_CONFIG loaded successfully. If FW_CONFIG device tree parsing
* is successful then load TB_FW_CONFIG device tree.
*/
fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, FW_CONFIG_ID);
if (fw_config_info != NULL) {
err = fconf_populate_dtb_registry(fw_config_info->config_addr);
if (err < 0) {
ERROR("Parsing of FW_CONFIG failed %d\n", err);
plat_error_handler(err);
}
/* load TB_FW_CONFIG */
err = fconf_load_config(TB_FW_CONFIG_ID);
if (err < 0) {
ERROR("Loading of TB_FW_CONFIG failed %d\n", err);
plat_error_handler(err);
}
} else {
ERROR("Invalid FW_CONFIG address\n");
plat_error_handler(err);
}
/* The BL2 ep_info arg0 is modified to point to FW_CONFIG */
desc = bl1_plat_get_image_desc(BL2_IMAGE_ID);
assert(desc != NULL);
desc->ep_info.args.arg0 = fw_config_info->config_addr;
#if TRUSTED_BOARD_BOOT
/* Share the Mbed TLS heap info with other images */
arm_bl1_set_mbedtls_heap();
#endif /* TRUSTED_BOARD_BOOT */
/*
* Allow access to the System counter timer module and program
* counter frequency for non secure images during FWU
*/
#ifdef ARM_SYS_TIMCTL_BASE
arm_configure_sys_timer();
#endif
#if (ARM_ARCH_MAJOR > 7) || defined(ARMV7_SUPPORTS_GENERIC_TIMER)
write_cntfrq_el0(plat_get_syscnt_freq2());
#endif
}
void bl1_plat_prepare_exit(entry_point_info_t *ep_info)
{
#if !ARM_DISABLE_TRUSTED_WDOG
/* Disable watchdog before leaving BL1 */
plat_arm_secure_wdt_stop();
#endif
#ifdef EL3_PAYLOAD_BASE
/*
* Program the EL3 payload's entry point address into the CPUs mailbox
* in order to release secondary CPUs from their holding pen and make
* them jump there.
*/
plat_arm_program_trusted_mailbox(ep_info->pc);
dsbsy();
sev();
#endif
}
/*
* On Arm platforms, the FWU process is triggered when the FIP image has
* been tampered with.
*/
bool plat_arm_bl1_fwu_needed(void)
{
return !arm_io_is_toc_valid();
}
/*******************************************************************************
* The following function checks if Firmware update is needed,
* by checking if TOC in FIP image is valid or not.
******************************************************************************/
unsigned int bl1_plat_get_next_image_id(void)
{
return plat_arm_bl1_fwu_needed() ? NS_BL1U_IMAGE_ID : BL2_IMAGE_ID;
}