plat/rockchip/rk3399/rk3399_def.h - filogic/atf - Gitiles

 /*
  * Copyright (c) 2014-2016, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * Redistributions of source code must retain the above copyright notice, this
  * list of conditions and the following disclaimer.
  *
  * Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * Neither the name of ARM nor the names of its contributors may be used
  * to endorse or promote products derived from this software without specific
  * prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */

 #ifndef __PLAT_DEF_H__
 #define __PLAT_DEF_H__

 #define RK3399_PRIMARY_CPU	0x0

 /* Special value used to verify platform parameters from BL2 to BL3-1 */
 #define RK_BL31_PLAT_PARAM_VAL	0x0f1e2d3c4b5a6978ULL

 #define SIZE_K(n)	((n) * 1024)
 #define SIZE_M(n)	((n) * 1024 * 1024)

 /* Register base address and size */
 #define MMIO_BASE		0xfe000000

 #define GIC500_BASE		(MMIO_BASE + 0xe00000)
 #define GIC500_SIZE		SIZE_M(2)

 #define PMU_BASE		(MMIO_BASE + 0x1310000)
 #define PMU_SIZE		SIZE_K(64)

 #define PMUGRF_BASE		(MMIO_BASE + 0x1320000)
 #define PMUGRF_SIZE		SIZE_K(64)

 #define SGRF_BASE		(MMIO_BASE + 0x1330000)
 #define SGRF_SIZE		SIZE_K(64)

 #define PMUSRAM_BASE		(MMIO_BASE + 0x13b0000)
 #define PMUSRAM_SIZE		SIZE_K(64)
 #define PMUSRAM_RSIZE		SIZE_K(8)

 #define PWM_BASE		(MMIO_BASE + 0x1420000)
 #define PWM_SIZE		SIZE_K(64)

 #define GPIO0_BASE		(MMIO_BASE + 0x1720000)
 #define GPIO0_SIZE		SIZE_K(64)

 #define GPIO1_BASE		(MMIO_BASE + 0x1730000)
 #define GPIO1_SIZE		SIZE_K(64)

 #define CRUS_BASE		(MMIO_BASE + 0x1750000)
 #define CRUS_SIZE		SIZE_K(128)

 #define GRF_BASE		(MMIO_BASE + 0x1770000)
 #define GRF_SIZE		SIZE_K(64)

 #define GPIO2_BASE		(MMIO_BASE + 0x1780000)
 #define GPIO2_SIZE		SIZE_K(32)

 #define GPIO3_BASE		(MMIO_BASE + 0x1788000)
 #define GPIO3_SIZE		SIZE_K(32)

 #define GPIO4_BASE		(MMIO_BASE + 0x1790000)
 #define GPIO4_SIZE		SIZE_K(32)

 #define STIME_BASE		(MMIO_BASE + 0x1860000)
 #define STIME_SIZE		SIZE_K(64)

 #define SERVICE_NOC_0_BASE	(MMIO_BASE + 0x1a50000)
 #define NOC_0_SIZE		SIZE_K(192)

 #define SERVICE_NOC_1_BASE	(MMIO_BASE + 0x1a84000)
 #define NOC_1_SIZE		SIZE_K(16)

 #define SERVICE_NOC_2_BASE	(MMIO_BASE + 0x1a8c000)
 #define NOC_2_SIZE		SIZE_K(16)

 #define SERVICE_NOC_3_BASE	(MMIO_BASE + 0x1a90000)
 #define NOC_3_SIZE		SIZE_K(448)

 #define CCI500_BASE		(MMIO_BASE + 0x1b00000)
 #define CCI500_SIZE		SIZE_M(1)

 /* Aggregate of all devices in the first GB */
 #define RK3399_DEV_RNG0_BASE	MMIO_BASE
 #define RK3399_DEV_RNG0_SIZE	0x1d00000

 /*
  * include i2c pmu/audio, pwm0-3 rkpwm0-3 uart_dbg,mailbox scr
  * 0xff650000 -0xff6c0000
  */
 #define PD_BUS0_BASE		(MMIO_BASE + 0x1650000)
 #define PD_BUS0_SIZE		SIZE_K(448)

 #define PMUCRU_BASE		(MMIO_BASE + 0x1750000)
 #define CRU_BASE		(MMIO_BASE + 0x1760000)

 #define COLD_BOOT_BASE		(MMIO_BASE + 0x1ff0000)

 /**************************************************************************
  * UART related constants
  **************************************************************************/
 #define RK3399_UART2_BASE	(0xff1a0000)
 #define RK3399_UART2_SIZE	SIZE_K(64)

 #define RK3399_BAUDRATE		(115200)
 #define RK3399_UART_CLOCK	(24000000)

 /******************************************************************************
  * System counter frequency related constants
  ******************************************************************************/
 #define SYS_COUNTER_FREQ_IN_TICKS	24000000

 /* Base rockchip_platform compatible GIC memory map */
 #define BASE_GICD_BASE		(GIC500_BASE)
 #define BASE_GICR_BASE		(GIC500_BASE + SIZE_M(1))

 /*****************************************************************************
  * CCI-400 related constants
  ******************************************************************************/
 #define PLAT_RK_CCI_CLUSTER0_SL_IFACE_IX	0
 #define PLAT_RK_CCI_CLUSTER1_SL_IFACE_IX	1

 /******************************************************************************
  * sgi, ppi
  ******************************************************************************/
 #define ARM_IRQ_SEC_PHY_TIMER		29

 #define ARM_IRQ_SEC_SGI_0		8
 #define ARM_IRQ_SEC_SGI_1		9
 #define ARM_IRQ_SEC_SGI_2		10
 #define ARM_IRQ_SEC_SGI_3		11
 #define ARM_IRQ_SEC_SGI_4		12
 #define ARM_IRQ_SEC_SGI_5		13
 #define ARM_IRQ_SEC_SGI_6		14
 #define ARM_IRQ_SEC_SGI_7		15
 /*
  * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
  * terminology. On a GICv2 system or mode, the lists will be merged and treated
  * as Group 0 interrupts.
  */
 #define RK3399_G1S_IRQS			ARM_IRQ_SEC_PHY_TIMER
 #define RK3399_G0_IRQS			ARM_IRQ_SEC_SGI_6

 #define PWM0_IOMUX_PWM_EN		(1 << 0)
 #define PWM1_IOMUX_PWM_EN		(1 << 1)
 #define PWM2_IOMUX_PWM_EN		(1 << 2)
 #define PWM3_IOMUX_PWM_EN		(1 << 3)

 #define PWM_CNT(n)			0x0000 + 0x10 * n
 #define PWM_PERIOD_HPR(n)		0x0004 + 0x10 * n
 #define PWM_DUTY_LPR(n)			0x0008 + 0x10 * n
 #define PWM_CTRL(n)			0x000c + 0x10 * n

 #endif /* __PLAT_DEF_H__ */
	/*
	* Copyright (c) 2014-2016, ARM Limited and Contributors. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* Redistributions of source code must retain the above copyright notice, this
	* list of conditions and the following disclaimer.
	*
	* Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* Neither the name of ARM nor the names of its contributors may be used
	* to endorse or promote products derived from this software without specific
	* prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/

	#ifndef __PLAT_DEF_H__
	#define __PLAT_DEF_H__

	#define RK3399_PRIMARY_CPU 0x0

	/* Special value used to verify platform parameters from BL2 to BL3-1 */
	#define RK_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL

	#define SIZE_K(n) ((n) * 1024)
	#define SIZE_M(n) ((n) * 1024 * 1024)

	/* Register base address and size */
	#define MMIO_BASE 0xfe000000

	#define GIC500_BASE (MMIO_BASE + 0xe00000)
	#define GIC500_SIZE SIZE_M(2)

	#define PMU_BASE (MMIO_BASE + 0x1310000)
	#define PMU_SIZE SIZE_K(64)

	#define PMUGRF_BASE (MMIO_BASE + 0x1320000)
	#define PMUGRF_SIZE SIZE_K(64)

	#define SGRF_BASE (MMIO_BASE + 0x1330000)
	#define SGRF_SIZE SIZE_K(64)

	#define PMUSRAM_BASE (MMIO_BASE + 0x13b0000)
	#define PMUSRAM_SIZE SIZE_K(64)
	#define PMUSRAM_RSIZE SIZE_K(8)

	#define PWM_BASE (MMIO_BASE + 0x1420000)
	#define PWM_SIZE SIZE_K(64)

	#define GPIO0_BASE (MMIO_BASE + 0x1720000)
	#define GPIO0_SIZE SIZE_K(64)

	#define GPIO1_BASE (MMIO_BASE + 0x1730000)
	#define GPIO1_SIZE SIZE_K(64)

	#define CRUS_BASE (MMIO_BASE + 0x1750000)
	#define CRUS_SIZE SIZE_K(128)

	#define GRF_BASE (MMIO_BASE + 0x1770000)
	#define GRF_SIZE SIZE_K(64)

	#define GPIO2_BASE (MMIO_BASE + 0x1780000)
	#define GPIO2_SIZE SIZE_K(32)

	#define GPIO3_BASE (MMIO_BASE + 0x1788000)
	#define GPIO3_SIZE SIZE_K(32)

	#define GPIO4_BASE (MMIO_BASE + 0x1790000)
	#define GPIO4_SIZE SIZE_K(32)

	#define STIME_BASE (MMIO_BASE + 0x1860000)
	#define STIME_SIZE SIZE_K(64)

	#define SERVICE_NOC_0_BASE (MMIO_BASE + 0x1a50000)
	#define NOC_0_SIZE SIZE_K(192)

	#define SERVICE_NOC_1_BASE (MMIO_BASE + 0x1a84000)
	#define NOC_1_SIZE SIZE_K(16)

	#define SERVICE_NOC_2_BASE (MMIO_BASE + 0x1a8c000)
	#define NOC_2_SIZE SIZE_K(16)

	#define SERVICE_NOC_3_BASE (MMIO_BASE + 0x1a90000)
	#define NOC_3_SIZE SIZE_K(448)

	#define CCI500_BASE (MMIO_BASE + 0x1b00000)
	#define CCI500_SIZE SIZE_M(1)

	/* Aggregate of all devices in the first GB */
	#define RK3399_DEV_RNG0_BASE MMIO_BASE
	#define RK3399_DEV_RNG0_SIZE 0x1d00000

	/*
	* include i2c pmu/audio, pwm0-3 rkpwm0-3 uart_dbg,mailbox scr
	* 0xff650000 -0xff6c0000
	*/
	#define PD_BUS0_BASE (MMIO_BASE + 0x1650000)
	#define PD_BUS0_SIZE SIZE_K(448)

	#define PMUCRU_BASE (MMIO_BASE + 0x1750000)
	#define CRU_BASE (MMIO_BASE + 0x1760000)

	#define COLD_BOOT_BASE (MMIO_BASE + 0x1ff0000)

	/**************************************************************************
	* UART related constants
	**************************************************************************/
	#define RK3399_UART2_BASE (0xff1a0000)
	#define RK3399_UART2_SIZE SIZE_K(64)

	#define RK3399_BAUDRATE (115200)
	#define RK3399_UART_CLOCK (24000000)

	/******************************************************************************
	* System counter frequency related constants
	******************************************************************************/
	#define SYS_COUNTER_FREQ_IN_TICKS 24000000

	/* Base rockchip_platform compatible GIC memory map */
	#define BASE_GICD_BASE (GIC500_BASE)
	#define BASE_GICR_BASE (GIC500_BASE + SIZE_M(1))

	/*****************************************************************************
	* CCI-400 related constants
	******************************************************************************/
	#define PLAT_RK_CCI_CLUSTER0_SL_IFACE_IX 0
	#define PLAT_RK_CCI_CLUSTER1_SL_IFACE_IX 1

	/******************************************************************************
	* sgi, ppi
	******************************************************************************/
	#define ARM_IRQ_SEC_PHY_TIMER 29

	#define ARM_IRQ_SEC_SGI_0 8
	#define ARM_IRQ_SEC_SGI_1 9
	#define ARM_IRQ_SEC_SGI_2 10
	#define ARM_IRQ_SEC_SGI_3 11
	#define ARM_IRQ_SEC_SGI_4 12
	#define ARM_IRQ_SEC_SGI_5 13
	#define ARM_IRQ_SEC_SGI_6 14
	#define ARM_IRQ_SEC_SGI_7 15
	/*
	* Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
	* terminology. On a GICv2 system or mode, the lists will be merged and treated
	* as Group 0 interrupts.
	*/
	#define RK3399_G1S_IRQS ARM_IRQ_SEC_PHY_TIMER
	#define RK3399_G0_IRQS ARM_IRQ_SEC_SGI_6

	#define PWM0_IOMUX_PWM_EN (1 << 0)
	#define PWM1_IOMUX_PWM_EN (1 << 1)
	#define PWM2_IOMUX_PWM_EN (1 << 2)
	#define PWM3_IOMUX_PWM_EN (1 << 3)

	#define PWM_CNT(n) 0x0000 + 0x10 * n
	#define PWM_PERIOD_HPR(n) 0x0004 + 0x10 * n
	#define PWM_DUTY_LPR(n) 0x0008 + 0x10 * n
	#define PWM_CTRL(n) 0x000c + 0x10 * n

	#endif /* __PLAT_DEF_H__ */