blob: 4f04a6f03c402d079e4f1b251d9611f92ffb9df2 [file] [log] [blame]
/*
* Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <errno.h>
#include <string.h>
#include <arch_helpers.h>
#include <common/bl_common.h>
#include <common/debug.h>
#include <common/desc_image_load.h>
#include <drivers/generic_delay_timer.h>
#include <drivers/mmc.h>
#include <drivers/st/bsec.h>
#include <drivers/st/regulator_fixed.h>
#include <drivers/st/stm32_iwdg.h>
#include <drivers/st/stm32_rng.h>
#include <drivers/st/stm32_uart.h>
#include <drivers/st/stm32mp1_clk.h>
#include <drivers/st/stm32mp1_pwr.h>
#include <drivers/st/stm32mp1_ram.h>
#include <drivers/st/stm32mp_pmic.h>
#include <lib/fconf/fconf.h>
#include <lib/fconf/fconf_dyn_cfg_getter.h>
#include <lib/mmio.h>
#include <lib/optee_utils.h>
#include <lib/xlat_tables/xlat_tables_v2.h>
#include <plat/common/platform.h>
#include <platform_def.h>
#include <stm32mp_common.h>
#include <stm32mp1_dbgmcu.h>
#if DEBUG
static const char debug_msg[] = {
"***************************************************\n"
"** DEBUG ACCESS PORT IS OPEN! **\n"
"** This boot image is only for debugging purpose **\n"
"** and is unsafe for production use. **\n"
"** **\n"
"** If you see this message and you are not **\n"
"** debugging report this immediately to your **\n"
"** vendor! **\n"
"***************************************************\n"
};
#endif
static void print_reset_reason(void)
{
uint32_t rstsr = mmio_read_32(stm32mp_rcc_base() + RCC_MP_RSTSCLRR);
if (rstsr == 0U) {
WARN("Reset reason unknown\n");
return;
}
INFO("Reset reason (0x%x):\n", rstsr);
if ((rstsr & RCC_MP_RSTSCLRR_PADRSTF) == 0U) {
if ((rstsr & RCC_MP_RSTSCLRR_STDBYRSTF) != 0U) {
INFO("System exits from STANDBY\n");
return;
}
if ((rstsr & RCC_MP_RSTSCLRR_CSTDBYRSTF) != 0U) {
INFO("MPU exits from CSTANDBY\n");
return;
}
}
if ((rstsr & RCC_MP_RSTSCLRR_PORRSTF) != 0U) {
INFO(" Power-on Reset (rst_por)\n");
return;
}
if ((rstsr & RCC_MP_RSTSCLRR_BORRSTF) != 0U) {
INFO(" Brownout Reset (rst_bor)\n");
return;
}
#if STM32MP15
if ((rstsr & RCC_MP_RSTSCLRR_MCSYSRSTF) != 0U) {
if ((rstsr & RCC_MP_RSTSCLRR_PADRSTF) != 0U) {
INFO(" System reset generated by MCU (MCSYSRST)\n");
} else {
INFO(" Local reset generated by MCU (MCSYSRST)\n");
}
return;
}
#endif
if ((rstsr & RCC_MP_RSTSCLRR_MPSYSRSTF) != 0U) {
INFO(" System reset generated by MPU (MPSYSRST)\n");
return;
}
if ((rstsr & RCC_MP_RSTSCLRR_HCSSRSTF) != 0U) {
INFO(" Reset due to a clock failure on HSE\n");
return;
}
if ((rstsr & RCC_MP_RSTSCLRR_IWDG1RSTF) != 0U) {
INFO(" IWDG1 Reset (rst_iwdg1)\n");
return;
}
if ((rstsr & RCC_MP_RSTSCLRR_IWDG2RSTF) != 0U) {
INFO(" IWDG2 Reset (rst_iwdg2)\n");
return;
}
if ((rstsr & RCC_MP_RSTSCLRR_MPUP0RSTF) != 0U) {
INFO(" MPU Processor 0 Reset\n");
return;
}
#if STM32MP15
if ((rstsr & RCC_MP_RSTSCLRR_MPUP1RSTF) != 0U) {
INFO(" MPU Processor 1 Reset\n");
return;
}
#endif
if ((rstsr & RCC_MP_RSTSCLRR_PADRSTF) != 0U) {
INFO(" Pad Reset from NRST\n");
return;
}
if ((rstsr & RCC_MP_RSTSCLRR_VCORERSTF) != 0U) {
INFO(" Reset due to a failure of VDD_CORE\n");
return;
}
ERROR(" Unidentified reset reason\n");
}
void bl2_el3_early_platform_setup(u_register_t arg0,
u_register_t arg1 __unused,
u_register_t arg2 __unused,
u_register_t arg3 __unused)
{
stm32mp_setup_early_console();
stm32mp_save_boot_ctx_address(arg0);
}
void bl2_platform_setup(void)
{
int ret;
ret = stm32mp1_ddr_probe();
if (ret < 0) {
ERROR("Invalid DDR init: error %d\n", ret);
panic();
}
/* Map DDR for binary load, now with cacheable attribute */
ret = mmap_add_dynamic_region(STM32MP_DDR_BASE, STM32MP_DDR_BASE,
STM32MP_DDR_MAX_SIZE, MT_MEMORY | MT_RW | MT_SECURE);
if (ret < 0) {
ERROR("DDR mapping: error %d\n", ret);
panic();
}
}
#if STM32MP15
static void update_monotonic_counter(void)
{
uint32_t version;
uint32_t otp;
CASSERT(STM32_TF_VERSION <= MAX_MONOTONIC_VALUE,
assert_stm32mp1_monotonic_counter_reach_max);
/* Check if monotonic counter needs to be incremented */
if (stm32_get_otp_index(MONOTONIC_OTP, &otp, NULL) != 0) {
panic();
}
if (stm32_get_otp_value_from_idx(otp, &version) != 0) {
panic();
}
if ((version + 1U) < BIT(STM32_TF_VERSION)) {
uint32_t result;
/* Need to increment the monotonic counter. */
version = BIT(STM32_TF_VERSION) - 1U;
result = bsec_program_otp(version, otp);
if (result != BSEC_OK) {
ERROR("BSEC: MONOTONIC_OTP program Error %u\n",
result);
panic();
}
INFO("Monotonic counter has been incremented (value 0x%x)\n",
version);
}
}
#endif
void bl2_el3_plat_arch_setup(void)
{
const char *board_model;
boot_api_context_t *boot_context =
(boot_api_context_t *)stm32mp_get_boot_ctx_address();
uintptr_t pwr_base;
uintptr_t rcc_base;
if (bsec_probe() != 0U) {
panic();
}
mmap_add_region(BL_CODE_BASE, BL_CODE_BASE,
BL_CODE_END - BL_CODE_BASE,
MT_CODE | MT_SECURE);
/* Prevent corruption of preloaded Device Tree */
mmap_add_region(DTB_BASE, DTB_BASE,
DTB_LIMIT - DTB_BASE,
MT_RO_DATA | MT_SECURE);
configure_mmu();
if (dt_open_and_check(STM32MP_DTB_BASE) < 0) {
panic();
}
pwr_base = stm32mp_pwr_base();
rcc_base = stm32mp_rcc_base();
/*
* Disable the backup domain write protection.
* The protection is enable at each reset by hardware
* and must be disabled by software.
*/
mmio_setbits_32(pwr_base + PWR_CR1, PWR_CR1_DBP);
while ((mmio_read_32(pwr_base + PWR_CR1) & PWR_CR1_DBP) == 0U) {
;
}
/* Reset backup domain on cold boot cases */
if ((mmio_read_32(rcc_base + RCC_BDCR) & RCC_BDCR_RTCSRC_MASK) == 0U) {
mmio_setbits_32(rcc_base + RCC_BDCR, RCC_BDCR_VSWRST);
while ((mmio_read_32(rcc_base + RCC_BDCR) & RCC_BDCR_VSWRST) ==
0U) {
;
}
mmio_clrbits_32(rcc_base + RCC_BDCR, RCC_BDCR_VSWRST);
}
#if STM32MP15
/* Disable MCKPROT */
mmio_clrbits_32(rcc_base + RCC_TZCR, RCC_TZCR_MCKPROT);
#endif
/*
* Set minimum reset pulse duration to 31ms for discrete power
* supplied boards.
*/
if (dt_pmic_status() <= 0) {
mmio_clrsetbits_32(rcc_base + RCC_RDLSICR,
RCC_RDLSICR_MRD_MASK,
31U << RCC_RDLSICR_MRD_SHIFT);
}
generic_delay_timer_init();
#if STM32MP_UART_PROGRAMMER
/* Disable programmer UART before changing clock tree */
if (boot_context->boot_interface_selected ==
BOOT_API_CTX_BOOT_INTERFACE_SEL_SERIAL_UART) {
uintptr_t uart_prog_addr =
get_uart_address(boot_context->boot_interface_instance);
stm32_uart_stop(uart_prog_addr);
}
#endif
if (stm32mp1_clk_probe() < 0) {
panic();
}
if (stm32mp1_clk_init() < 0) {
panic();
}
stm32_save_boot_interface(boot_context->boot_interface_selected,
boot_context->boot_interface_instance);
stm32_save_boot_auth(boot_context->auth_status,
boot_context->boot_partition_used_toboot);
#if STM32MP_USB_PROGRAMMER && STM32MP15
/* Deconfigure all UART RX pins configured by ROM code */
stm32mp1_deconfigure_uart_pins();
#endif
if (stm32mp_uart_console_setup() != 0) {
goto skip_console_init;
}
stm32mp_print_cpuinfo();
board_model = dt_get_board_model();
if (board_model != NULL) {
NOTICE("Model: %s\n", board_model);
}
stm32mp_print_boardinfo();
if (boot_context->auth_status != BOOT_API_CTX_AUTH_NO) {
NOTICE("Bootrom authentication %s\n",
(boot_context->auth_status == BOOT_API_CTX_AUTH_FAILED) ?
"failed" : "succeeded");
}
skip_console_init:
#if !TRUSTED_BOARD_BOOT
if (stm32mp_is_closed_device()) {
/* Closed chip mandates authentication */
ERROR("Secure chip: TRUSTED_BOARD_BOOT must be enabled\n");
panic();
}
#endif
if (fixed_regulator_register() != 0) {
panic();
}
if (dt_pmic_status() > 0) {
initialize_pmic();
if (pmic_voltages_init() != 0) {
ERROR("PMIC voltages init failed\n");
panic();
}
print_pmic_info_and_debug();
}
stm32mp1_syscfg_init();
if (stm32_iwdg_init() < 0) {
panic();
}
stm32_iwdg_refresh();
if (bsec_read_debug_conf() != 0U) {
if (stm32mp_is_closed_device()) {
#if DEBUG
WARN("\n%s", debug_msg);
#else
ERROR("***Debug opened on closed chip***\n");
#endif
}
}
#if STM32MP13
if (stm32_rng_init() != 0) {
panic();
}
#endif
stm32mp1_arch_security_setup();
print_reset_reason();
#if STM32MP15
update_monotonic_counter();
#endif
stm32mp1_syscfg_enable_io_compensation_finish();
fconf_populate("TB_FW", STM32MP_DTB_BASE);
stm32mp_io_setup();
}
/*******************************************************************************
* This function can be used by the platforms to update/use image
* information for given `image_id`.
******************************************************************************/
int bl2_plat_handle_post_image_load(unsigned int image_id)
{
int err = 0;
bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
bl_mem_params_node_t *bl32_mem_params;
bl_mem_params_node_t *pager_mem_params __unused;
bl_mem_params_node_t *paged_mem_params __unused;
const struct dyn_cfg_dtb_info_t *config_info;
bl_mem_params_node_t *tos_fw_mem_params;
unsigned int i;
unsigned int idx;
unsigned long long ddr_top __unused;
const unsigned int image_ids[] = {
BL32_IMAGE_ID,
BL33_IMAGE_ID,
HW_CONFIG_ID,
TOS_FW_CONFIG_ID,
};
assert(bl_mem_params != NULL);
switch (image_id) {
case FW_CONFIG_ID:
/* Set global DTB info for fixed fw_config information */
set_config_info(STM32MP_FW_CONFIG_BASE, ~0UL, STM32MP_FW_CONFIG_MAX_SIZE,
FW_CONFIG_ID);
fconf_populate("FW_CONFIG", STM32MP_FW_CONFIG_BASE);
idx = dyn_cfg_dtb_info_get_index(TOS_FW_CONFIG_ID);
/* Iterate through all the fw config IDs */
for (i = 0U; i < ARRAY_SIZE(image_ids); i++) {
if ((image_ids[i] == TOS_FW_CONFIG_ID) && (idx == FCONF_INVALID_IDX)) {
continue;
}
bl_mem_params = get_bl_mem_params_node(image_ids[i]);
assert(bl_mem_params != NULL);
config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, image_ids[i]);
if (config_info == NULL) {
continue;
}
bl_mem_params->image_info.image_base = config_info->config_addr;
bl_mem_params->image_info.image_max_size = config_info->config_max_size;
bl_mem_params->image_info.h.attr &= ~IMAGE_ATTRIB_SKIP_LOADING;
switch (image_ids[i]) {
case BL32_IMAGE_ID:
bl_mem_params->ep_info.pc = config_info->config_addr;
/* In case of OPTEE, initialize address space with tos_fw addr */
pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
assert(pager_mem_params != NULL);
pager_mem_params->image_info.image_base = config_info->config_addr;
pager_mem_params->image_info.image_max_size =
config_info->config_max_size;
/* Init base and size for pager if exist */
paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID);
if (paged_mem_params != NULL) {
paged_mem_params->image_info.image_base = STM32MP_DDR_BASE +
(dt_get_ddr_size() - STM32MP_DDR_S_SIZE -
STM32MP_DDR_SHMEM_SIZE);
paged_mem_params->image_info.image_max_size =
STM32MP_DDR_S_SIZE;
}
break;
case BL33_IMAGE_ID:
bl_mem_params->ep_info.pc = config_info->config_addr;
break;
case HW_CONFIG_ID:
case TOS_FW_CONFIG_ID:
break;
default:
return -EINVAL;
}
}
break;
case BL32_IMAGE_ID:
if (optee_header_is_valid(bl_mem_params->image_info.image_base)) {
image_info_t *paged_image_info = NULL;
/* BL32 is OP-TEE header */
bl_mem_params->ep_info.pc = bl_mem_params->image_info.image_base;
pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
assert(pager_mem_params != NULL);
paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID);
if (paged_mem_params != NULL) {
paged_image_info = &paged_mem_params->image_info;
}
err = parse_optee_header(&bl_mem_params->ep_info,
&pager_mem_params->image_info,
paged_image_info);
if (err != 0) {
ERROR("OPTEE header parse error.\n");
panic();
}
/* Set optee boot info from parsed header data */
if (paged_mem_params != NULL) {
bl_mem_params->ep_info.args.arg0 =
paged_mem_params->image_info.image_base;
} else {
bl_mem_params->ep_info.args.arg0 = 0U;
}
bl_mem_params->ep_info.args.arg1 = 0U; /* Unused */
bl_mem_params->ep_info.args.arg2 = 0U; /* No DT supported */
} else {
bl_mem_params->ep_info.pc = bl_mem_params->image_info.image_base;
tos_fw_mem_params = get_bl_mem_params_node(TOS_FW_CONFIG_ID);
assert(tos_fw_mem_params != NULL);
bl_mem_params->image_info.image_max_size +=
tos_fw_mem_params->image_info.image_max_size;
bl_mem_params->ep_info.args.arg0 = 0;
}
break;
case BL33_IMAGE_ID:
bl32_mem_params = get_bl_mem_params_node(BL32_IMAGE_ID);
assert(bl32_mem_params != NULL);
bl32_mem_params->ep_info.lr_svc = bl_mem_params->ep_info.pc;
#if PSA_FWU_SUPPORT
stm32mp1_fwu_set_boot_idx();
#endif /* PSA_FWU_SUPPORT */
break;
default:
/* Do nothing in default case */
break;
}
#if STM32MP_SDMMC || STM32MP_EMMC
/*
* Invalidate remaining data read from MMC but not flushed by load_image_flush().
* We take the worst case which is 2 MMC blocks.
*/
if ((image_id != FW_CONFIG_ID) &&
((bl_mem_params->image_info.h.attr & IMAGE_ATTRIB_SKIP_LOADING) == 0U)) {
inv_dcache_range(bl_mem_params->image_info.image_base +
bl_mem_params->image_info.image_size,
2U * MMC_BLOCK_SIZE);
}
#endif /* STM32MP_SDMMC || STM32MP_EMMC */
return err;
}
void bl2_el3_plat_prepare_exit(void)
{
uint16_t boot_itf = stm32mp_get_boot_itf_selected();
switch (boot_itf) {
#if STM32MP_UART_PROGRAMMER || STM32MP_USB_PROGRAMMER
case BOOT_API_CTX_BOOT_INTERFACE_SEL_SERIAL_UART:
case BOOT_API_CTX_BOOT_INTERFACE_SEL_SERIAL_USB:
/* Invalidate the downloaded buffer used with io_memmap */
inv_dcache_range(DWL_BUFFER_BASE, DWL_BUFFER_SIZE);
break;
#endif /* STM32MP_UART_PROGRAMMER || STM32MP_USB_PROGRAMMER */
default:
/* Do nothing in default case */
break;
}
stm32mp1_security_setup();
}