blob: e15bf0f93b23dd8d612a5ce54a52db77cc9d892c [file] [log] [blame]
/*
* Copyright (c) 2015-2023, Arm Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <string.h>
#include <platform_def.h>
#include <arch_features.h>
#include <arch_helpers.h>
#include <common/bl_common.h>
#include <common/debug.h>
#include <common/desc_image_load.h>
#include <drivers/generic_delay_timer.h>
#include <drivers/partition/partition.h>
#include <lib/fconf/fconf.h>
#include <lib/fconf/fconf_dyn_cfg_getter.h>
#include <lib/gpt_rme/gpt_rme.h>
#ifdef SPD_opteed
#include <lib/optee_utils.h>
#endif
#include <lib/utils.h>
#if ENABLE_RME
#include <plat/arm/common/arm_pas_def.h>
#endif
#include <plat/arm/common/plat_arm.h>
#include <plat/common/platform.h>
/* Data structure which holds the extents of the trusted SRAM for BL2 */
static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
/* Base address of fw_config received from BL1 */
static uintptr_t config_base;
/*
* Check that BL2_BASE is above ARM_FW_CONFIG_LIMIT. This reserved page is
* for `meminfo_t` data structure and fw_configs passed from BL1.
*/
CASSERT(BL2_BASE >= ARM_FW_CONFIG_LIMIT, assert_bl2_base_overflows);
/* Weak definitions may be overridden in specific ARM standard platform */
#pragma weak bl2_early_platform_setup2
#pragma weak bl2_platform_setup
#pragma weak bl2_plat_arch_setup
#pragma weak bl2_plat_sec_mem_layout
#if ENABLE_RME
#define MAP_BL2_TOTAL MAP_REGION_FLAT( \
bl2_tzram_layout.total_base, \
bl2_tzram_layout.total_size, \
MT_MEMORY | MT_RW | MT_ROOT)
#else
#define MAP_BL2_TOTAL MAP_REGION_FLAT( \
bl2_tzram_layout.total_base, \
bl2_tzram_layout.total_size, \
MT_MEMORY | MT_RW | MT_SECURE)
#endif /* ENABLE_RME */
#pragma weak arm_bl2_plat_handle_post_image_load
/*******************************************************************************
* BL1 has passed the extents of the trusted SRAM that should be visible to BL2
* in x0. This memory layout is sitting at the base of the free trusted SRAM.
* Copy it to a safe location before its reclaimed by later BL2 functionality.
******************************************************************************/
void arm_bl2_early_platform_setup(uintptr_t fw_config,
struct meminfo *mem_layout)
{
int __maybe_unused ret;
/* Initialize the console to provide early debug support */
arm_console_boot_init();
/* Setup the BL2 memory layout */
bl2_tzram_layout = *mem_layout;
config_base = fw_config;
/* Initialise the IO layer and register platform IO devices */
plat_arm_io_setup();
/* Load partition table */
#if ARM_GPT_SUPPORT
ret = gpt_partition_init();
if (ret != 0) {
ERROR("GPT partition initialisation failed!\n");
panic();
}
#endif /* ARM_GPT_SUPPORT */
}
void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3)
{
arm_bl2_early_platform_setup((uintptr_t)arg0, (meminfo_t *)arg1);
generic_delay_timer_init();
}
/*
* Perform BL2 preload setup. Currently we initialise the dynamic
* configuration here.
*/
void bl2_plat_preload_setup(void)
{
arm_bl2_dyn_cfg_init();
#if ARM_GPT_SUPPORT && !PSA_FWU_SUPPORT
/* Always use the FIP from bank 0 */
arm_set_fip_addr(0U);
#endif /* ARM_GPT_SUPPORT && !PSA_FWU_SUPPORT */
}
/*
* Perform ARM standard platform setup.
*/
void arm_bl2_platform_setup(void)
{
#if !ENABLE_RME
/* Initialize the secure environment */
plat_arm_security_setup();
#endif
#if defined(PLAT_ARM_MEM_PROT_ADDR)
arm_nor_psci_do_static_mem_protect();
#endif
}
void bl2_platform_setup(void)
{
arm_bl2_platform_setup();
}
#if ENABLE_RME
static void arm_bl2_plat_gpt_setup(void)
{
/*
* The GPT library might modify the gpt regions structure to optimize
* the layout, so the array cannot be constant.
*/
pas_region_t pas_regions[] = {
ARM_PAS_KERNEL,
ARM_PAS_SECURE,
ARM_PAS_REALM,
ARM_PAS_EL3_DRAM,
ARM_PAS_GPTS,
ARM_PAS_KERNEL_1
};
/* Initialize entire protected space to GPT_GPI_ANY. */
if (gpt_init_l0_tables(GPCCR_PPS_64GB, ARM_L0_GPT_ADDR_BASE,
ARM_L0_GPT_SIZE) < 0) {
ERROR("gpt_init_l0_tables() failed!\n");
panic();
}
/* Carve out defined PAS ranges. */
if (gpt_init_pas_l1_tables(GPCCR_PGS_4K,
ARM_L1_GPT_ADDR_BASE,
ARM_L1_GPT_SIZE,
pas_regions,
(unsigned int)(sizeof(pas_regions) /
sizeof(pas_region_t))) < 0) {
ERROR("gpt_init_pas_l1_tables() failed!\n");
panic();
}
INFO("Enabling Granule Protection Checks\n");
if (gpt_enable() < 0) {
ERROR("gpt_enable() failed!\n");
panic();
}
}
#endif /* ENABLE_RME */
/*******************************************************************************
* Perform the very early platform specific architectural setup here.
* When RME is enabled the secure environment is initialised before
* initialising and enabling Granule Protection.
* This function initialises the MMU in a quick and dirty way.
******************************************************************************/
void arm_bl2_plat_arch_setup(void)
{
#if USE_COHERENT_MEM && !ARM_CRYPTOCELL_INTEG
/*
* Ensure ARM platforms don't use coherent memory in BL2 unless
* cryptocell integration is enabled.
*/
assert((BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE) == 0U);
#endif
const mmap_region_t bl_regions[] = {
MAP_BL2_TOTAL,
ARM_MAP_BL_RO,
#if USE_ROMLIB
ARM_MAP_ROMLIB_CODE,
ARM_MAP_ROMLIB_DATA,
#endif
#if ARM_CRYPTOCELL_INTEG
ARM_MAP_BL_COHERENT_RAM,
#endif
ARM_MAP_BL_CONFIG_REGION,
#if ENABLE_RME
ARM_MAP_L0_GPT_REGION,
#endif
{0}
};
#if ENABLE_RME
/* Initialise the secure environment */
plat_arm_security_setup();
#endif
setup_page_tables(bl_regions, plat_arm_get_mmap());
#ifdef __aarch64__
#if ENABLE_RME
/* BL2 runs in EL3 when RME enabled. */
assert(get_armv9_2_feat_rme_support() != 0U);
enable_mmu_el3(0);
/* Initialise and enable granule protection after MMU. */
arm_bl2_plat_gpt_setup();
#else
enable_mmu_el1(0);
#endif
#else
enable_mmu_svc_mon(0);
#endif
arm_setup_romlib();
}
void bl2_plat_arch_setup(void)
{
const struct dyn_cfg_dtb_info_t *tb_fw_config_info;
arm_bl2_plat_arch_setup();
/* Fill the properties struct with the info from the config dtb */
fconf_populate("FW_CONFIG", config_base);
/* TB_FW_CONFIG was also loaded by BL1 */
tb_fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, TB_FW_CONFIG_ID);
assert(tb_fw_config_info != NULL);
fconf_populate("TB_FW", tb_fw_config_info->config_addr);
}
int arm_bl2_handle_post_image_load(unsigned int image_id)
{
int err = 0;
bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
#ifdef SPD_opteed
bl_mem_params_node_t *pager_mem_params = NULL;
bl_mem_params_node_t *paged_mem_params = NULL;
#endif
assert(bl_mem_params != NULL);
switch (image_id) {
#ifdef __aarch64__
case BL32_IMAGE_ID:
#ifdef SPD_opteed
pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
assert(pager_mem_params);
paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID);
assert(paged_mem_params);
err = parse_optee_header(&bl_mem_params->ep_info,
&pager_mem_params->image_info,
&paged_mem_params->image_info);
if (err != 0) {
WARN("OPTEE header parse error.\n");
}
#endif
bl_mem_params->ep_info.spsr = arm_get_spsr_for_bl32_entry();
break;
#endif
case BL33_IMAGE_ID:
/* BL33 expects to receive the primary CPU MPID (through r0) */
bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
bl_mem_params->ep_info.spsr = arm_get_spsr_for_bl33_entry();
break;
#ifdef SCP_BL2_BASE
case SCP_BL2_IMAGE_ID:
/* The subsequent handling of SCP_BL2 is platform specific */
err = plat_arm_bl2_handle_scp_bl2(&bl_mem_params->image_info);
if (err) {
WARN("Failure in platform-specific handling of SCP_BL2 image.\n");
}
break;
#endif
default:
/* Do nothing in default case */
break;
}
return err;
}
/*******************************************************************************
* This function can be used by the platforms to update/use image
* information for given `image_id`.
******************************************************************************/
int arm_bl2_plat_handle_post_image_load(unsigned int image_id)
{
#if defined(SPD_spmd) && BL2_ENABLE_SP_LOAD
/* For Secure Partitions we don't need post processing */
if ((image_id >= (MAX_NUMBER_IDS - MAX_SP_IDS)) &&
(image_id < MAX_NUMBER_IDS)) {
return 0;
}
#endif
return arm_bl2_handle_post_image_load(image_id);
}