| /* |
| * Copyright 2024 NXP |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| #include <errno.h> |
| |
| #include <s32cc-clk-regs.h> |
| |
| #include <common/debug.h> |
| #include <drivers/clk.h> |
| #include <lib/mmio.h> |
| #include <s32cc-clk-ids.h> |
| #include <s32cc-clk-modules.h> |
| #include <s32cc-clk-utils.h> |
| |
| #define MAX_STACK_DEPTH (15U) |
| |
| /* This is used for floating-point precision calculations. */ |
| #define FP_PRECISION (100000000UL) |
| |
| struct s32cc_clk_drv { |
| uintptr_t fxosc_base; |
| uintptr_t armpll_base; |
| uintptr_t cgm1_base; |
| }; |
| |
| static int update_stack_depth(unsigned int *depth) |
| { |
| if (*depth == 0U) { |
| return -ENOMEM; |
| } |
| |
| (*depth)--; |
| return 0; |
| } |
| |
| static struct s32cc_clk_drv *get_drv(void) |
| { |
| static struct s32cc_clk_drv driver = { |
| .fxosc_base = FXOSC_BASE_ADDR, |
| .armpll_base = ARMPLL_BASE_ADDR, |
| .cgm1_base = CGM1_BASE_ADDR, |
| }; |
| |
| return &driver; |
| } |
| |
| static int enable_module(const struct s32cc_clk_obj *module, unsigned int *depth); |
| |
| static int enable_clk_module(const struct s32cc_clk_obj *module, |
| const struct s32cc_clk_drv *drv, |
| unsigned int *depth) |
| { |
| const struct s32cc_clk *clk = s32cc_obj2clk(module); |
| int ret; |
| |
| ret = update_stack_depth(depth); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if (clk == NULL) { |
| return -EINVAL; |
| } |
| |
| if (clk->module != NULL) { |
| return enable_module(clk->module, depth); |
| } |
| |
| if (clk->pclock != NULL) { |
| return enable_clk_module(&clk->pclock->desc, drv, depth); |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int get_base_addr(enum s32cc_clk_source id, const struct s32cc_clk_drv *drv, |
| uintptr_t *base) |
| { |
| int ret = 0; |
| |
| switch (id) { |
| case S32CC_FXOSC: |
| *base = drv->fxosc_base; |
| break; |
| case S32CC_ARM_PLL: |
| *base = drv->armpll_base; |
| break; |
| case S32CC_CGM1: |
| *base = drv->cgm1_base; |
| break; |
| case S32CC_FIRC: |
| break; |
| case S32CC_SIRC: |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| if (ret != 0) { |
| ERROR("Unknown clock source id: %u\n", id); |
| } |
| |
| return ret; |
| } |
| |
| static void enable_fxosc(const struct s32cc_clk_drv *drv) |
| { |
| uintptr_t fxosc_base = drv->fxosc_base; |
| uint32_t ctrl; |
| |
| ctrl = mmio_read_32(FXOSC_CTRL(fxosc_base)); |
| if ((ctrl & FXOSC_CTRL_OSCON) != U(0)) { |
| return; |
| } |
| |
| ctrl = FXOSC_CTRL_COMP_EN; |
| ctrl &= ~FXOSC_CTRL_OSC_BYP; |
| ctrl |= FXOSC_CTRL_EOCV(0x1); |
| ctrl |= FXOSC_CTRL_GM_SEL(0x7); |
| mmio_write_32(FXOSC_CTRL(fxosc_base), ctrl); |
| |
| /* Switch ON the crystal oscillator. */ |
| mmio_setbits_32(FXOSC_CTRL(fxosc_base), FXOSC_CTRL_OSCON); |
| |
| /* Wait until the clock is stable. */ |
| while ((mmio_read_32(FXOSC_STAT(fxosc_base)) & FXOSC_STAT_OSC_STAT) == U(0)) { |
| } |
| } |
| |
| static int enable_osc(const struct s32cc_clk_obj *module, |
| const struct s32cc_clk_drv *drv, |
| unsigned int *depth) |
| { |
| const struct s32cc_osc *osc = s32cc_obj2osc(module); |
| int ret = 0; |
| |
| ret = update_stack_depth(depth); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| switch (osc->source) { |
| case S32CC_FXOSC: |
| enable_fxosc(drv); |
| break; |
| /* FIRC and SIRC oscillators are enabled by default */ |
| case S32CC_FIRC: |
| break; |
| case S32CC_SIRC: |
| break; |
| default: |
| ERROR("Invalid oscillator %d\n", osc->source); |
| ret = -EINVAL; |
| break; |
| }; |
| |
| return ret; |
| } |
| |
| static int get_pll_mfi_mfn(unsigned long pll_vco, unsigned long ref_freq, |
| uint32_t *mfi, uint32_t *mfn) |
| |
| { |
| unsigned long vco; |
| unsigned long mfn64; |
| |
| /* FRAC-N mode */ |
| *mfi = (uint32_t)(pll_vco / ref_freq); |
| |
| /* MFN formula : (double)(pll_vco % ref_freq) / ref_freq * 18432.0 */ |
| mfn64 = pll_vco % ref_freq; |
| mfn64 *= FP_PRECISION; |
| mfn64 /= ref_freq; |
| mfn64 *= 18432UL; |
| mfn64 /= FP_PRECISION; |
| |
| if (mfn64 > UINT32_MAX) { |
| return -EINVAL; |
| } |
| |
| *mfn = (uint32_t)mfn64; |
| |
| vco = ((unsigned long)*mfn * FP_PRECISION) / 18432UL; |
| vco += (unsigned long)*mfi * FP_PRECISION; |
| vco *= ref_freq; |
| vco /= FP_PRECISION; |
| |
| if (vco != pll_vco) { |
| ERROR("Failed to find MFI and MFN settings for PLL freq %lu. Nearest freq = %lu\n", |
| pll_vco, vco); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static struct s32cc_clkmux *get_pll_mux(const struct s32cc_pll *pll) |
| { |
| const struct s32cc_clk_obj *source = pll->source; |
| const struct s32cc_clk *clk; |
| |
| if (source == NULL) { |
| ERROR("Failed to identify PLL's parent\n"); |
| return NULL; |
| } |
| |
| if (source->type != s32cc_clk_t) { |
| ERROR("The parent of the PLL isn't a clock\n"); |
| return NULL; |
| } |
| |
| clk = s32cc_obj2clk(source); |
| |
| if (clk->module == NULL) { |
| ERROR("The clock isn't connected to a module\n"); |
| return NULL; |
| } |
| |
| source = clk->module; |
| |
| if ((source->type != s32cc_clkmux_t) && |
| (source->type != s32cc_shared_clkmux_t)) { |
| ERROR("The parent of the PLL isn't a MUX\n"); |
| return NULL; |
| } |
| |
| return s32cc_obj2clkmux(source); |
| } |
| |
| static void disable_odiv(uintptr_t pll_addr, uint32_t div_index) |
| { |
| mmio_clrbits_32(PLLDIG_PLLODIV(pll_addr, div_index), PLLDIG_PLLODIV_DE); |
| } |
| |
| static void enable_odiv(uintptr_t pll_addr, uint32_t div_index) |
| { |
| mmio_setbits_32(PLLDIG_PLLODIV(pll_addr, div_index), PLLDIG_PLLODIV_DE); |
| } |
| |
| static void disable_odivs(uintptr_t pll_addr, uint32_t ndivs) |
| { |
| uint32_t i; |
| |
| for (i = 0; i < ndivs; i++) { |
| disable_odiv(pll_addr, i); |
| } |
| } |
| |
| static void enable_pll_hw(uintptr_t pll_addr) |
| { |
| /* Enable the PLL. */ |
| mmio_write_32(PLLDIG_PLLCR(pll_addr), 0x0); |
| |
| /* Poll until PLL acquires lock. */ |
| while ((mmio_read_32(PLLDIG_PLLSR(pll_addr)) & PLLDIG_PLLSR_LOCK) == 0U) { |
| } |
| } |
| |
| static void disable_pll_hw(uintptr_t pll_addr) |
| { |
| mmio_write_32(PLLDIG_PLLCR(pll_addr), PLLDIG_PLLCR_PLLPD); |
| } |
| |
| static int program_pll(const struct s32cc_pll *pll, uintptr_t pll_addr, |
| const struct s32cc_clk_drv *drv, uint32_t sclk_id, |
| unsigned long sclk_freq) |
| { |
| uint32_t rdiv = 1, mfi, mfn; |
| int ret; |
| |
| ret = get_pll_mfi_mfn(pll->vco_freq, sclk_freq, &mfi, &mfn); |
| if (ret != 0) { |
| return -EINVAL; |
| } |
| |
| /* Disable ODIVs*/ |
| disable_odivs(pll_addr, pll->ndividers); |
| |
| /* Disable PLL */ |
| disable_pll_hw(pll_addr); |
| |
| /* Program PLLCLKMUX */ |
| mmio_write_32(PLLDIG_PLLCLKMUX(pll_addr), sclk_id); |
| |
| /* Program VCO */ |
| mmio_clrsetbits_32(PLLDIG_PLLDV(pll_addr), |
| PLLDIG_PLLDV_RDIV_MASK | PLLDIG_PLLDV_MFI_MASK, |
| PLLDIG_PLLDV_RDIV_SET(rdiv) | PLLDIG_PLLDV_MFI(mfi)); |
| |
| mmio_write_32(PLLDIG_PLLFD(pll_addr), |
| PLLDIG_PLLFD_MFN_SET(mfn) | PLLDIG_PLLFD_SMDEN); |
| |
| enable_pll_hw(pll_addr); |
| |
| return ret; |
| } |
| |
| static int enable_pll(const struct s32cc_clk_obj *module, |
| const struct s32cc_clk_drv *drv, |
| unsigned int *depth) |
| { |
| const struct s32cc_pll *pll = s32cc_obj2pll(module); |
| const struct s32cc_clkmux *mux; |
| uintptr_t pll_addr = UL(0x0); |
| unsigned long sclk_freq; |
| uint32_t sclk_id; |
| int ret; |
| |
| ret = update_stack_depth(depth); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| mux = get_pll_mux(pll); |
| if (mux == NULL) { |
| return -EINVAL; |
| } |
| |
| if (pll->instance != mux->module) { |
| ERROR("MUX type is not in sync with PLL ID\n"); |
| return -EINVAL; |
| } |
| |
| ret = get_base_addr(pll->instance, drv, &pll_addr); |
| if (ret != 0) { |
| ERROR("Failed to detect PLL instance\n"); |
| return ret; |
| } |
| |
| switch (mux->source_id) { |
| case S32CC_CLK_FIRC: |
| sclk_freq = 48U * MHZ; |
| sclk_id = 0; |
| break; |
| case S32CC_CLK_FXOSC: |
| sclk_freq = 40U * MHZ; |
| sclk_id = 1; |
| break; |
| default: |
| ERROR("Invalid source selection for PLL 0x%lx\n", |
| pll_addr); |
| return -EINVAL; |
| }; |
| |
| return program_pll(pll, pll_addr, drv, sclk_id, sclk_freq); |
| } |
| |
| static inline struct s32cc_pll *get_div_pll(const struct s32cc_pll_out_div *pdiv) |
| { |
| const struct s32cc_clk_obj *parent; |
| |
| parent = pdiv->parent; |
| if (parent == NULL) { |
| ERROR("Failed to identify PLL divider's parent\n"); |
| return NULL; |
| } |
| |
| if (parent->type != s32cc_pll_t) { |
| ERROR("The parent of the divider is not a PLL instance\n"); |
| return NULL; |
| } |
| |
| return s32cc_obj2pll(parent); |
| } |
| |
| static void config_pll_out_div(uintptr_t pll_addr, uint32_t div_index, uint32_t dc) |
| { |
| uint32_t pllodiv; |
| uint32_t pdiv; |
| |
| pllodiv = mmio_read_32(PLLDIG_PLLODIV(pll_addr, div_index)); |
| pdiv = PLLDIG_PLLODIV_DIV(pllodiv); |
| |
| if (((pdiv + 1U) == dc) && ((pllodiv & PLLDIG_PLLODIV_DE) != 0U)) { |
| return; |
| } |
| |
| if ((pllodiv & PLLDIG_PLLODIV_DE) != 0U) { |
| disable_odiv(pll_addr, div_index); |
| } |
| |
| pllodiv = PLLDIG_PLLODIV_DIV_SET(dc - 1U); |
| mmio_write_32(PLLDIG_PLLODIV(pll_addr, div_index), pllodiv); |
| |
| enable_odiv(pll_addr, div_index); |
| } |
| |
| static int enable_pll_div(const struct s32cc_clk_obj *module, |
| const struct s32cc_clk_drv *drv, |
| unsigned int *depth) |
| { |
| const struct s32cc_pll_out_div *pdiv = s32cc_obj2plldiv(module); |
| uintptr_t pll_addr = 0x0ULL; |
| const struct s32cc_pll *pll; |
| uint32_t dc; |
| int ret; |
| |
| ret = update_stack_depth(depth); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| pll = get_div_pll(pdiv); |
| if (pll == NULL) { |
| ERROR("The parent of the PLL DIV is invalid\n"); |
| return 0; |
| } |
| |
| ret = get_base_addr(pll->instance, drv, &pll_addr); |
| if (ret != 0) { |
| ERROR("Failed to detect PLL instance\n"); |
| return -EINVAL; |
| } |
| |
| dc = (uint32_t)(pll->vco_freq / pdiv->freq); |
| |
| config_pll_out_div(pll_addr, pdiv->index, dc); |
| |
| return 0; |
| } |
| |
| static int cgm_mux_clk_config(uintptr_t cgm_addr, uint32_t mux, uint32_t source, |
| bool safe_clk) |
| { |
| uint32_t css, csc; |
| |
| css = mmio_read_32(CGM_MUXn_CSS(cgm_addr, mux)); |
| |
| /* Already configured */ |
| if ((MC_CGM_MUXn_CSS_SELSTAT(css) == source) && |
| (MC_CGM_MUXn_CSS_SWTRG(css) == MC_CGM_MUXn_CSS_SWTRG_SUCCESS) && |
| ((css & MC_CGM_MUXn_CSS_SWIP) == 0U) && !safe_clk) { |
| return 0; |
| } |
| |
| /* Ongoing clock switch? */ |
| while ((mmio_read_32(CGM_MUXn_CSS(cgm_addr, mux)) & |
| MC_CGM_MUXn_CSS_SWIP) != 0U) { |
| } |
| |
| csc = mmio_read_32(CGM_MUXn_CSC(cgm_addr, mux)); |
| |
| /* Clear previous source. */ |
| csc &= ~(MC_CGM_MUXn_CSC_SELCTL_MASK); |
| |
| if (!safe_clk) { |
| /* Select the clock source and trigger the clock switch. */ |
| csc |= MC_CGM_MUXn_CSC_SELCTL(source) | MC_CGM_MUXn_CSC_CLK_SW; |
| } else { |
| /* Switch to safe clock */ |
| csc |= MC_CGM_MUXn_CSC_SAFE_SW; |
| } |
| |
| mmio_write_32(CGM_MUXn_CSC(cgm_addr, mux), csc); |
| |
| /* Wait for configuration bit to auto-clear. */ |
| while ((mmio_read_32(CGM_MUXn_CSC(cgm_addr, mux)) & |
| MC_CGM_MUXn_CSC_CLK_SW) != 0U) { |
| } |
| |
| /* Is the clock switch completed? */ |
| while ((mmio_read_32(CGM_MUXn_CSS(cgm_addr, mux)) & |
| MC_CGM_MUXn_CSS_SWIP) != 0U) { |
| } |
| |
| /* |
| * Check if the switch succeeded. |
| * Check switch trigger cause and the source. |
| */ |
| css = mmio_read_32(CGM_MUXn_CSS(cgm_addr, mux)); |
| if (!safe_clk) { |
| if ((MC_CGM_MUXn_CSS_SWTRG(css) == MC_CGM_MUXn_CSS_SWTRG_SUCCESS) && |
| (MC_CGM_MUXn_CSS_SELSTAT(css) == source)) { |
| return 0; |
| } |
| |
| ERROR("Failed to change the source of mux %" PRIu32 " to %" PRIu32 " (CGM=%lu)\n", |
| mux, source, cgm_addr); |
| } else { |
| if (((MC_CGM_MUXn_CSS_SWTRG(css) == MC_CGM_MUXn_CSS_SWTRG_SAFE_CLK) || |
| (MC_CGM_MUXn_CSS_SWTRG(css) == MC_CGM_MUXn_CSS_SWTRG_SAFE_CLK_INACTIVE)) && |
| ((MC_CGM_MUXn_CSS_SAFE_SW & css) != 0U)) { |
| return 0; |
| } |
| |
| ERROR("The switch of mux %" PRIu32 " (CGM=%lu) to safe clock failed\n", |
| mux, cgm_addr); |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int enable_cgm_mux(const struct s32cc_clkmux *mux, |
| const struct s32cc_clk_drv *drv) |
| { |
| uintptr_t cgm_addr = UL(0x0); |
| uint32_t mux_hw_clk; |
| int ret; |
| |
| ret = get_base_addr(mux->module, drv, &cgm_addr); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| mux_hw_clk = (uint32_t)S32CC_CLK_ID(mux->source_id); |
| |
| return cgm_mux_clk_config(cgm_addr, mux->index, |
| mux_hw_clk, false); |
| } |
| |
| static int enable_mux(const struct s32cc_clk_obj *module, |
| const struct s32cc_clk_drv *drv, |
| unsigned int *depth) |
| { |
| const struct s32cc_clkmux *mux = s32cc_obj2clkmux(module); |
| const struct s32cc_clk *clk; |
| int ret = 0; |
| |
| ret = update_stack_depth(depth); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if (mux == NULL) { |
| return -EINVAL; |
| } |
| |
| clk = s32cc_get_arch_clk(mux->source_id); |
| if (clk == NULL) { |
| ERROR("Invalid parent (%lu) for mux %" PRIu8 "\n", |
| mux->source_id, mux->index); |
| return -EINVAL; |
| } |
| |
| switch (mux->module) { |
| /* PLL mux will be enabled by PLL setup */ |
| case S32CC_ARM_PLL: |
| break; |
| case S32CC_CGM1: |
| ret = enable_cgm_mux(mux, drv); |
| break; |
| default: |
| ERROR("Unknown mux parent type: %d\n", mux->module); |
| ret = -EINVAL; |
| break; |
| }; |
| |
| return ret; |
| } |
| |
| static int enable_module(const struct s32cc_clk_obj *module, unsigned int *depth) |
| { |
| const struct s32cc_clk_drv *drv = get_drv(); |
| int ret = 0; |
| |
| ret = update_stack_depth(depth); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if (drv == NULL) { |
| return -EINVAL; |
| } |
| |
| switch (module->type) { |
| case s32cc_osc_t: |
| ret = enable_osc(module, drv, depth); |
| break; |
| case s32cc_clk_t: |
| ret = enable_clk_module(module, drv, depth); |
| break; |
| case s32cc_pll_t: |
| ret = enable_pll(module, drv, depth); |
| break; |
| case s32cc_pll_out_div_t: |
| ret = enable_pll_div(module, drv, depth); |
| break; |
| case s32cc_clkmux_t: |
| ret = enable_mux(module, drv, depth); |
| break; |
| case s32cc_shared_clkmux_t: |
| ret = enable_mux(module, drv, depth); |
| break; |
| case s32cc_fixed_div_t: |
| ret = -ENOTSUP; |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int s32cc_clk_enable(unsigned long id) |
| { |
| unsigned int depth = MAX_STACK_DEPTH; |
| const struct s32cc_clk *clk; |
| |
| clk = s32cc_get_arch_clk(id); |
| if (clk == NULL) { |
| return -EINVAL; |
| } |
| |
| return enable_module(&clk->desc, &depth); |
| } |
| |
| static void s32cc_clk_disable(unsigned long id) |
| { |
| } |
| |
| static bool s32cc_clk_is_enabled(unsigned long id) |
| { |
| return false; |
| } |
| |
| static unsigned long s32cc_clk_get_rate(unsigned long id) |
| { |
| return 0; |
| } |
| |
| static int set_module_rate(const struct s32cc_clk_obj *module, |
| unsigned long rate, unsigned long *orate, |
| unsigned int *depth); |
| |
| static int set_osc_freq(const struct s32cc_clk_obj *module, unsigned long rate, |
| unsigned long *orate, unsigned int *depth) |
| { |
| struct s32cc_osc *osc = s32cc_obj2osc(module); |
| int ret; |
| |
| ret = update_stack_depth(depth); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if ((osc->freq != 0UL) && (rate != osc->freq)) { |
| ERROR("Already initialized oscillator. freq = %lu\n", |
| osc->freq); |
| return -EINVAL; |
| } |
| |
| osc->freq = rate; |
| *orate = osc->freq; |
| |
| return 0; |
| } |
| |
| static int set_clk_freq(const struct s32cc_clk_obj *module, unsigned long rate, |
| unsigned long *orate, unsigned int *depth) |
| { |
| const struct s32cc_clk *clk = s32cc_obj2clk(module); |
| int ret; |
| |
| ret = update_stack_depth(depth); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if ((clk->min_freq != 0UL) && (clk->max_freq != 0UL) && |
| ((rate < clk->min_freq) || (rate > clk->max_freq))) { |
| ERROR("%lu frequency is out of the allowed range: [%lu:%lu]\n", |
| rate, clk->min_freq, clk->max_freq); |
| return -EINVAL; |
| } |
| |
| if (clk->module != NULL) { |
| return set_module_rate(clk->module, rate, orate, depth); |
| } |
| |
| if (clk->pclock != NULL) { |
| return set_clk_freq(&clk->pclock->desc, rate, orate, depth); |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int set_pll_freq(const struct s32cc_clk_obj *module, unsigned long rate, |
| unsigned long *orate, unsigned int *depth) |
| { |
| struct s32cc_pll *pll = s32cc_obj2pll(module); |
| int ret; |
| |
| ret = update_stack_depth(depth); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if ((pll->vco_freq != 0UL) && (pll->vco_freq != rate)) { |
| ERROR("PLL frequency was already set\n"); |
| return -EINVAL; |
| } |
| |
| pll->vco_freq = rate; |
| *orate = pll->vco_freq; |
| |
| return 0; |
| } |
| |
| static int set_pll_div_freq(const struct s32cc_clk_obj *module, unsigned long rate, |
| unsigned long *orate, unsigned int *depth) |
| { |
| struct s32cc_pll_out_div *pdiv = s32cc_obj2plldiv(module); |
| const struct s32cc_pll *pll; |
| unsigned long prate, dc; |
| int ret; |
| |
| ret = update_stack_depth(depth); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if (pdiv->parent == NULL) { |
| ERROR("Failed to identify PLL divider's parent\n"); |
| return -EINVAL; |
| } |
| |
| pll = s32cc_obj2pll(pdiv->parent); |
| if (pll == NULL) { |
| ERROR("The parent of the PLL DIV is invalid\n"); |
| return -EINVAL; |
| } |
| |
| prate = pll->vco_freq; |
| |
| /** |
| * The PLL is not initialized yet, so let's take a risk |
| * and accept the proposed rate. |
| */ |
| if (prate == 0UL) { |
| pdiv->freq = rate; |
| *orate = rate; |
| return 0; |
| } |
| |
| /* Decline in case the rate cannot fit PLL's requirements. */ |
| dc = prate / rate; |
| if ((prate / dc) != rate) { |
| return -EINVAL; |
| } |
| |
| pdiv->freq = rate; |
| *orate = pdiv->freq; |
| |
| return 0; |
| } |
| |
| static int set_fixed_div_freq(const struct s32cc_clk_obj *module, unsigned long rate, |
| unsigned long *orate, unsigned int *depth) |
| { |
| const struct s32cc_fixed_div *fdiv = s32cc_obj2fixeddiv(module); |
| int ret; |
| |
| ret = update_stack_depth(depth); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if (fdiv->parent == NULL) { |
| ERROR("The divider doesn't have a valid parent\b"); |
| return -EINVAL; |
| } |
| |
| ret = set_module_rate(fdiv->parent, rate * fdiv->rate_div, orate, depth); |
| |
| /* Update the output rate based on the parent's rate */ |
| *orate /= fdiv->rate_div; |
| |
| return ret; |
| } |
| |
| static int set_mux_freq(const struct s32cc_clk_obj *module, unsigned long rate, |
| unsigned long *orate, unsigned int *depth) |
| { |
| const struct s32cc_clkmux *mux = s32cc_obj2clkmux(module); |
| const struct s32cc_clk *clk = s32cc_get_arch_clk(mux->source_id); |
| int ret; |
| |
| ret = update_stack_depth(depth); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if (clk == NULL) { |
| ERROR("Mux (id:%" PRIu8 ") without a valid source (%lu)\n", |
| mux->index, mux->source_id); |
| return -EINVAL; |
| } |
| |
| return set_module_rate(&clk->desc, rate, orate, depth); |
| } |
| |
| static int set_module_rate(const struct s32cc_clk_obj *module, |
| unsigned long rate, unsigned long *orate, |
| unsigned int *depth) |
| { |
| int ret = 0; |
| |
| ret = update_stack_depth(depth); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| switch (module->type) { |
| case s32cc_clk_t: |
| ret = set_clk_freq(module, rate, orate, depth); |
| break; |
| case s32cc_osc_t: |
| ret = set_osc_freq(module, rate, orate, depth); |
| break; |
| case s32cc_pll_t: |
| ret = set_pll_freq(module, rate, orate, depth); |
| break; |
| case s32cc_pll_out_div_t: |
| ret = set_pll_div_freq(module, rate, orate, depth); |
| break; |
| case s32cc_fixed_div_t: |
| ret = set_fixed_div_freq(module, rate, orate, depth); |
| break; |
| case s32cc_clkmux_t: |
| ret = set_mux_freq(module, rate, orate, depth); |
| break; |
| case s32cc_shared_clkmux_t: |
| ret = set_mux_freq(module, rate, orate, depth); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int s32cc_clk_set_rate(unsigned long id, unsigned long rate, |
| unsigned long *orate) |
| { |
| unsigned int depth = MAX_STACK_DEPTH; |
| const struct s32cc_clk *clk; |
| int ret; |
| |
| clk = s32cc_get_arch_clk(id); |
| if (clk == NULL) { |
| return -EINVAL; |
| } |
| |
| ret = set_module_rate(&clk->desc, rate, orate, &depth); |
| if (ret != 0) { |
| ERROR("Failed to set frequency (%lu MHz) for clock %lu\n", |
| rate, id); |
| } |
| |
| return ret; |
| } |
| |
| static int s32cc_clk_get_parent(unsigned long id) |
| { |
| return -ENOTSUP; |
| } |
| |
| static int s32cc_clk_set_parent(unsigned long id, unsigned long parent_id) |
| { |
| const struct s32cc_clk *parent; |
| const struct s32cc_clk *clk; |
| bool valid_source = false; |
| struct s32cc_clkmux *mux; |
| uint8_t i; |
| |
| clk = s32cc_get_arch_clk(id); |
| if (clk == NULL) { |
| return -EINVAL; |
| } |
| |
| parent = s32cc_get_arch_clk(parent_id); |
| if (parent == NULL) { |
| return -EINVAL; |
| } |
| |
| if (!is_s32cc_clk_mux(clk)) { |
| ERROR("Clock %lu is not a mux\n", id); |
| return -EINVAL; |
| } |
| |
| mux = s32cc_clk2mux(clk); |
| if (mux == NULL) { |
| ERROR("Failed to cast clock %lu to clock mux\n", id); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < mux->nclks; i++) { |
| if (mux->clkids[i] == parent_id) { |
| valid_source = true; |
| break; |
| } |
| } |
| |
| if (!valid_source) { |
| ERROR("Clock %lu is not a valid clock for mux %lu\n", |
| parent_id, id); |
| return -EINVAL; |
| } |
| |
| mux->source_id = parent_id; |
| |
| return 0; |
| } |
| |
| void s32cc_clk_register_drv(void) |
| { |
| static const struct clk_ops s32cc_clk_ops = { |
| .enable = s32cc_clk_enable, |
| .disable = s32cc_clk_disable, |
| .is_enabled = s32cc_clk_is_enabled, |
| .get_rate = s32cc_clk_get_rate, |
| .set_rate = s32cc_clk_set_rate, |
| .get_parent = s32cc_clk_get_parent, |
| .set_parent = s32cc_clk_set_parent, |
| }; |
| |
| clk_register(&s32cc_clk_ops); |
| } |
| |