blob: c468427640d69821c775c9f5312ab394c0a6228e [file] [log] [blame]
developer4f4219d2023-05-17 18:09:47 +08001From 11737f3523ed3dff2a2ed35b658f562478022896 Mon Sep 17 00:00:00 2001
2From: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
3Date: Wed, 17 May 2023 17:34:55 +0800
4Subject: [PATCH] wifi: mt76: mt7915: fix DFS CAC tx emission issue after
5 interface down up
6
7FW's channel state is set during the first wifi interface setup. If the switch reason for
8setting the tx/rx path during second-time wifi interface setup is CH_SWITCH_NORMAL,
9then the FW would perform runtime dpd channel calibration during DFS CAC, which leads to
10tx emission. Therefore, in order to bypass tx calibration during DFS CAC, set the switch reason
11to CH_SWITCH_DFS whenever chandef is set to DFS channel.
12
13Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
14---
15 mt7915/mcu.c | 6 +++---
16 1 file changed, 3 insertions(+), 3 deletions(-)
17
18diff --git a/mt7915/mcu.c b/mt7915/mcu.c
19index a9f8a88..a759214 100644
20--- a/mt7915/mcu.c
21+++ b/mt7915/mcu.c
22@@ -2773,12 +2773,12 @@ int mt7915_mcu_set_chan_info(struct mt7915_phy *phy, int cmd)
23 if (mt76_connac_spe_idx(phy->mt76->antenna_mask))
24 req.tx_path_num = fls(phy->mt76->antenna_mask);
25
26- if (cmd == MCU_EXT_CMD(SET_RX_PATH) ||
27- dev->mt76.hw->conf.flags & IEEE80211_CONF_MONITOR)
28+ if (dev->mt76.hw->conf.flags & IEEE80211_CONF_MONITOR)
29 req.switch_reason = CH_SWITCH_NORMAL;
30 else if (phy->mt76->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
31 req.switch_reason = CH_SWITCH_SCAN_BYPASS_DPD;
32- else if (!cfg80211_reg_can_beacon(phy->mt76->hw->wiphy, chandef,
33+ else if (cfg80211_chandef_valid(chandef) &&
34+ !cfg80211_reg_can_beacon(phy->mt76->hw->wiphy, chandef,
35 NL80211_IFTYPE_AP))
36 req.switch_reason = CH_SWITCH_DFS;
37 else
38--
392.18.0
40