target/linux/mediatek/patches-5.4/999-2611-phy-phy-mtk-tphy-add-support-efuse-setting.patch

From 004157ce74543694981c461e95ac0cc1fa8721d7 Mon Sep 17 00:00:00 2001
From: Sam Shih <sam.shih@mediatek.com>
Date: Fri, 2 Jun 2023 13:06:25 +0800
Subject: [PATCH] 
 [high-speed-io][999-2611-phy-phy-mtk-tphy-add-support-efuse-setting.patch]

---
 drivers/phy/mediatek/phy-mtk-tphy.c | 195 ++++++++++++++++++++++++++++
 1 file changed, 195 insertions(+)

diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index c6e073401..fcf8c845f 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -12,6 +12,7 @@
 #include <linux/iopoll.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
+#include <linux/nvmem-consumer.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/phy/phy.h>
@@ -41,11 +42,16 @@
 #define SSUSB_SIFSLV_V2_U3PHYD		0x200
 #define SSUSB_SIFSLV_V2_U3PHYA		0x400
 
+#define U3P_MISC_REG1		0x04
+#define MR1_EFUSE_AUTO_LOAD_DIS		BIT(6)
+
 #define U3P_USBPHYACR0		0x000
 #define PA0_RG_U2PLL_FORCE_ON		BIT(15)
 #define PA0_RG_USB20_INTR_EN		BIT(5)
 
 #define U3P_USBPHYACR1		0x004
+#define PA1_RG_INTR_CAL		GENMASK(23, 19)
+#define PA1_RG_INTR_CAL_VAL(x)	((0x1f & (x)) << 19)
 #define PA1_RG_VRT_SEL			GENMASK(14, 12)
 #define PA1_RG_VRT_SEL_VAL(x)	((0x7 & (x)) << 12)
 #define PA1_RG_TERM_SEL		GENMASK(10, 8)
@@ -117,6 +123,8 @@
 #define P3C_RG_SWRST_U3_PHYD_FORCE_EN	BIT(24)
 
 #define U3P_U3_PHYA_REG0	0x000
+#define P3A_RG_IEXT_INTR		GENMASK(15, 10)
+#define P3A_RG_IEXT_INTR_VAL(x)		((0x3f & (x)) << 10)
 #define P3A_RG_CLKDRV_OFF		GENMASK(3, 2)
 #define P3A_RG_CLKDRV_OFF_VAL(x)	((0x3 & (x)) << 2)
 
@@ -171,6 +179,25 @@
 #define P3D_RG_FWAKE_TH		GENMASK(21, 16)
 #define P3D_RG_FWAKE_TH_VAL(x)	((0x3f & (x)) << 16)
 
+#define U3P_U3_PHYD_IMPCAL0		0x010
+#define P3D_RG_FORCE_TX_IMPEL		BIT(31)
+#define P3D_RG_TX_IMPEL			GENMASK(28, 24)
+#define P3D_RG_TX_IMPEL_VAL(x)		((0x1f & (x)) << 24)
+
+#define U3P_U3_PHYD_IMPCAL1		0x014
+#define P3D_RG_FORCE_RX_IMPEL		BIT(31)
+#define P3D_RG_RX_IMPEL			GENMASK(28, 24)
+#define P3D_RG_RX_IMPEL_VAL(x)		((0x1f & (x)) << 24)
+
+#define U3P_U3_PHYD_RX0			0x02c
+
+#define U3P_U3_PHYD_T2RLB		0x030
+
+#define U3P_U3_PHYD_PIPE0		0x040
+
+#define U3P_U3_PHYD_RSV			0x054
+#define P3D_RG_EFUSE_AUTO_LOAD_DIS	BIT(12)
+
 #define U3P_U3_PHYD_CDR1		0x05c
 #define P3D_RG_CDR_BIR_LTD1		GENMASK(28, 24)
 #define P3D_RG_CDR_BIR_LTD1_VAL(x)	((0x1f & (x)) << 24)
@@ -280,11 +307,23 @@
 enum mtk_phy_version {
 	MTK_PHY_V1 = 1,
 	MTK_PHY_V2,
+	MTK_PHY_V3,
 };
 
 struct mtk_phy_pdata {
 	/* avoid RX sensitivity level degradation only for mt8173 */
 	bool avoid_rx_sen_degradation;
+	/*
+	 * u2phy should use integer mode instead of fractional mode of
+	 * 48M PLL, fix it by switching PLL to 26M from default 48M
+	 * for mt8195
+	 */
+	bool sx_pll_48m_to_26m;
+	/*
+	 * Some SoCs (e.g. mt8195) drop a bit when use auto load efuse,
+	 * support sw way, also support it for v2/v3 optionally.
+	 */
+	bool sw_efuse_supported;
 	enum mtk_phy_version version;
 };
 
@@ -309,6 +348,10 @@ struct mtk_phy_instance {
 		struct u3phy_banks u3_banks;
 	};
 	struct clk *ref_clk;	/* reference clock of anolog phy */
+	u32 efuse_sw_en;
+	u32 efuse_intr;
+	u32 efuse_tx_imp;
+	u32 efuse_rx_imp;
 	u32 index;
 	u32 type;
 	struct regmap *type_sw;
@@ -970,6 +1013,139 @@ static int phy_type_set(struct mtk_phy_instance *instance)
 	return 0;
 }
 
+static int phy_efuse_get(struct mtk_tphy *tphy, struct mtk_phy_instance *instance)
+{
+	struct device *dev = &instance->phy->dev;
+	int ret = 0;
+
+	dev_err(dev, "try to get sw efuse\n");
+
+	/* tphy v1 doesn't support sw efuse, skip it */
+	if (!tphy->pdata->sw_efuse_supported) {
+		instance->efuse_sw_en = 0;
+		return 0;
+	}
+
+	/* software efuse is optional */
+	instance->efuse_sw_en = device_property_read_bool(dev, "nvmem-cells");
+	if (!instance->efuse_sw_en)
+		return 0;
+
+	dev_err(dev, "try to get sw efuse+\n");
+
+	switch (instance->type) {
+	case PHY_TYPE_USB2:
+		ret = nvmem_cell_read_variable_le_u32(dev, "intr", &instance->efuse_intr);
+		if (ret) {
+			dev_err(dev, "fail to get u2 intr efuse, %d\n", ret);
+			break;
+		}
+
+		/* no efuse, ignore it */
+		if (!instance->efuse_intr) {
+			dev_warn(dev, "no u2 intr efuse, but dts enable it\n");
+			instance->efuse_sw_en = 0;
+			break;
+		}
+
+		dev_info(dev, "u2 efuse - intr %x\n", instance->efuse_intr);
+		break;
+	case PHY_TYPE_USB3:
+	case PHY_TYPE_PCIE:
+		ret = nvmem_cell_read_variable_le_u32(dev, "intr", &instance->efuse_intr);
+		if (ret) {
+			dev_err(dev, "fail to get u3 intr efuse, %d\n", ret);
+			break;
+		}
+
+		ret = nvmem_cell_read_variable_le_u32(dev, "rx_imp", &instance->efuse_rx_imp);
+		if (ret) {
+			dev_err(dev, "fail to get u3 rx_imp efuse, %d\n", ret);
+			break;
+		}
+
+		ret = nvmem_cell_read_variable_le_u32(dev, "tx_imp", &instance->efuse_tx_imp);
+		if (ret) {
+			dev_err(dev, "fail to get u3 tx_imp efuse, %d\n", ret);
+			break;
+		}
+
+		/* no efuse, ignore it */
+		if (!instance->efuse_intr &&
+		    !instance->efuse_rx_imp &&
+		    !instance->efuse_tx_imp) {
+			dev_warn(dev, "no u3 intr efuse, but dts enable it\n");
+			instance->efuse_sw_en = 0;
+			break;
+		}
+
+		dev_info(dev, "u3 efuse - intr %x, rx_imp %x, tx_imp %x\n",
+			 instance->efuse_intr, instance->efuse_rx_imp,
+			 instance->efuse_tx_imp);
+		break;
+	default:
+		dev_err(dev, "no sw efuse for type %d\n", instance->type);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void phy_efuse_set(struct mtk_phy_instance *instance)
+{
+	struct device *dev = &instance->phy->dev;
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	struct u3phy_banks *u3_banks = &instance->u3_banks;
+	u32 tmp;
+
+	if (!instance->efuse_sw_en)
+		return;
+
+	switch (instance->type) {
+	case PHY_TYPE_USB2:
+		tmp = readl(u2_banks->misc + U3P_MISC_REG1);
+		tmp |= MR1_EFUSE_AUTO_LOAD_DIS;
+		writel(tmp, u2_banks->misc + U3P_MISC_REG1);
+
+		tmp = readl(u2_banks->com + U3P_USBPHYACR1);
+		tmp &= ~PA1_RG_INTR_CAL;
+		tmp |= PA1_RG_INTR_CAL_VAL(instance->efuse_intr);
+		writel(tmp, u2_banks->com + U3P_USBPHYACR1);
+		pr_err("%s set efuse intr %x\n", __func__, instance->efuse_intr);
+
+		break;
+	case PHY_TYPE_USB3:
+	case PHY_TYPE_PCIE:
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RSV);
+		tmp |= P3D_RG_EFUSE_AUTO_LOAD_DIS;
+		writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RSV);
+
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0);
+		tmp &= ~P3D_RG_TX_IMPEL;
+		tmp |= P3D_RG_TX_IMPEL_VAL(instance->efuse_tx_imp);
+		tmp |= P3D_RG_FORCE_TX_IMPEL;
+		writel(tmp, u3_banks->phyd + U3P_U3_PHYD_IMPCAL0);
+
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1);
+		tmp &= ~P3D_RG_RX_IMPEL;
+		tmp |= P3D_RG_RX_IMPEL_VAL(instance->efuse_rx_imp);
+		tmp |= P3D_RG_FORCE_RX_IMPEL;
+		writel(tmp, u3_banks->phyd + U3P_U3_PHYD_IMPCAL1);
+
+		tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
+		tmp &= ~P3A_RG_IEXT_INTR;
+		tmp |= P3A_RG_IEXT_INTR_VAL(instance->efuse_intr);
+		writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG0);
+		pr_err("%s set efuse, tx_imp %x, rx_imp %x intr %x\n",
+			__func__, instance->efuse_tx_imp,
+			instance->efuse_rx_imp, instance->efuse_intr);
+		break;
+	default:
+		dev_warn(dev, "no sw efuse for type %d\n", instance->type);
+	}
+}
+
+
 static int mtk_phy_init(struct phy *phy)
 {
 	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
@@ -988,6 +1164,8 @@ static int mtk_phy_init(struct phy *phy)
 		return ret;
 	}
 
+	phy_efuse_set(instance);
+
 	switch (instance->type) {
 	case PHY_TYPE_USB2:
 		u2_phy_instance_init(tphy, instance);
@@ -1072,6 +1250,7 @@ static struct phy *mtk_phy_xlate(struct device *dev,
 	struct mtk_phy_instance *instance = NULL;
 	struct device_node *phy_np = args->np;
 	int index;
+	int ret;
 
 	if (args->args_count != 1) {
 		dev_err(dev, "invalid number of cells in 'phy' property\n");
@@ -1108,6 +1287,10 @@ static struct phy *mtk_phy_xlate(struct device *dev,
 		return ERR_PTR(-EINVAL);
 	}
 
+	ret = phy_efuse_get(tphy, instance);
+	if (ret)
+		return ERR_PTR(ret);
+
 	phy_parse_property(tphy, instance);
 	phy_type_set(instance);
 
@@ -1130,14 +1313,26 @@ static const struct mtk_phy_pdata tphy_v1_pdata = {
 
 static const struct mtk_phy_pdata tphy_v2_pdata = {
 	.avoid_rx_sen_degradation = false,
+	.sw_efuse_supported = true,
 	.version = MTK_PHY_V2,
 };
 
+static const struct mtk_phy_pdata tphy_v3_pdata = {
+	.sw_efuse_supported = true,
+	.version = MTK_PHY_V3,
+};
+
 static const struct mtk_phy_pdata mt8173_pdata = {
 	.avoid_rx_sen_degradation = true,
 	.version = MTK_PHY_V1,
 };
 
+static const struct mtk_phy_pdata mt8195_pdata = {
+	.sx_pll_48m_to_26m = true,
+	.sw_efuse_supported = true,
+	.version = MTK_PHY_V3,
+};
+
 static const struct of_device_id mtk_tphy_id_table[] = {
 	{ .compatible = "mediatek,mt2701-u3phy", .data = &tphy_v1_pdata },
 	{ .compatible = "mediatek,mt2712-u3phy", .data = &tphy_v2_pdata },
-- 
2.34.1