[][dts: mt7986: add snfi dts for 2.5Gphy board]

[Description]
Add snfi dts for 2.5Gphy board.

[Release-log]
N/A

Change-Id: Ic26db8a05d819722dbbabe5f60b9c98421451e3f
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/5064130
diff --git a/target/linux/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7986b-2500wan-snfi-nand-rfb.dts b/target/linux/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7986b-2500wan-snfi-nand-rfb.dts
new file mode 100644
index 0000000..ab72f6c
--- /dev/null
+++ b/target/linux/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7986b-2500wan-snfi-nand-rfb.dts
@@ -0,0 +1,209 @@
+/dts-v1/;
+#include "mt7986b.dtsi"
+#include "mt7986b-pinctrl.dtsi"
+#include "mt7986-snfi-nand-partition.dtsi"
+/ {
+	model = "MediaTek MT7986b RFB";
+	compatible = "mediatek,mt7986b-snfi-snand-rfb";
+	chosen {
+		bootargs = "console=ttyS0,115200n1 loglevel=8  \
+				earlycon=uart8250,mmio32,0x11002000";
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x10000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/* Warning: pins shared with &snand */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+/* Warning: pins shared with &spi1 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy5: phy@5 {
+			compatible = "ethernet-phy-id67c9.de0a";
+			reg = <5>;
+			reset-gpios = <&pio 6 1>;
+			reset-deassert-us = <20000>;
+			phy-mode = "2500base-x";
+		};
+
+		phy6: phy@6 {
+			compatible = "ethernet-phy-id67c9.de0a";
+			reg = <6>;
+			phy-mode = "2500base-x";
+		};
+
+		switch@0 {
+			compatible = "mediatek,mt7531";
+			reg = <31>;
+			reset-gpios = <&pio 5 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan0";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "lan4";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "lan5";
+					phy-mode = "2500base-x";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+						pause;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "2500base-x";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+};
+
+&hnat {
+	mtketh-wan = "eth1";
+	mtketh-lan = "lan";
+	mtketh-max-gmac = <2>;
+	status = "okay";
+};
+
+/* Warning: pins shared with &uart1 */
+&snand {
+	pinctrl-names = "default";
+	pinctrl-0 = <&snfi_pins>;
+	mediatek,quad-spi;
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+/* Warning: pins shared with &uart2 */
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	status = "okay";
+};
+
+&wbsys {
+	mediatek,mtd-eeprom = <&factory 0x0000>;
+	status = "okay";
+};
+
+&pio {
+	snfi_pins: snfi-pins-23-to-28 {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+		conf-clk {
+			pins = "SPI0_CLK";
+			drive-strength = <MTK_DRIVE_8mA>;
+			mediatek,pull-down-adv = <0>;	/* bias-disable */
+		};
+		conf-pu {
+			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+			drive-strength = <MTK_DRIVE_6mA>;
+			mediatek,pull-up-adv = <0>;	/* bias-disable */
+		};
+		conf-pd {
+			pins = "SPI0_MOSI", "SPI0_MISO";
+			drive-strength = <MTK_DRIVE_6mA>;
+			mediatek,pull-down-adv = <0>;	/* bias-disable */
+		};
+	};
+};
diff --git a/target/linux/mediatek/image/mt7986.mk b/target/linux/mediatek/image/mt7986.mk
index 32f9050..86d7bc4 100644
--- a/target/linux/mediatek/image/mt7986.mk
+++ b/target/linux/mediatek/image/mt7986.mk
@@ -206,6 +206,23 @@
 endef
 TARGET_DEVICES += mt7986b-ax6000-2500wan-spim-nand-rfb
 
+define Device/mt7986b-ax6000-2500wan-snfi-nand-rfb
+  DEVICE_VENDOR := MediaTek
+  DEVICE_MODEL := mt7986b-ax6000-2500wan-snfi-nand-rfb (SPI-NAND,UBI)
+  DEVICE_DTS := mt7986b-2500wan-snfi-nand-rfb
+  DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
+  SUPPORTED_DEVICES := mediatek,mt7986b-2500wan-snfi-nand-rfb
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  IMAGE_SIZE := 65536k
+  KERNEL_IN_UBI := 1
+  IMAGES += factory.bin
+  IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += mt7986b-ax6000-2500wan-snfi-nand-rfb
+
 define Device/mediatek_mt7986-fpga
   DEVICE_VENDOR := MediaTek
   DEVICE_MODEL := MTK7986 FPGA