[][mtd: spinand: winbond: add support for W25NxxKV series]
[Description]
Add support for W25NxxKV series.
[Release-log]
N/A
Change-Id: I022a67a2f122427e56839f3da8f4b2f9afd8820f
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/5761775
diff --git a/target/linux/mediatek/patches-5.4/0490-mtd-spinand-winbond-Support-for-W25MxxGV-W25NxxKV-series.patch b/target/linux/mediatek/patches-5.4/0490-mtd-spinand-winbond-Support-for-W25MxxGV-W25NxxKV-series.patch
new file mode 100644
index 0000000..9dd3659
--- /dev/null
+++ b/target/linux/mediatek/patches-5.4/0490-mtd-spinand-winbond-Support-for-W25MxxGV-W25NxxKV-series.patch
@@ -0,0 +1,201 @@
+--- a/drivers/mtd/nand/spi/winbond.c
++++ b/drivers/mtd/nand/spi/winbond.c
+@@ -15,6 +15,25 @@
+
+ #define WINBOND_CFG_BUF_READ BIT(3)
+
++#define W25N02_N04KV_STATUS_ECC_MASK (3 << 4)
++#define W25N02_N04KV_STATUS_ECC_NO_BITFLIPS (0 << 4)
++#define W25N02_N04KV_STATUS_ECC_1_4_BITFLIPS (1 << 4)
++#define W25N02_N04KV_STATUS_ECC_5_8_BITFLIPS (3 << 4)
++#define W25N02_N04KV_STATUS_ECC_UNCOR_ERROR (2 << 4)
++
++#define W25N01_M02GV_STATUS_ECC_MASK (3 << 4)
++#define W25N01_M02GV_STATUS_ECC_NO_BITFLIPS (0 << 4)
++#define W25N01_M02GV_STATUS_ECC_1_BITFLIPS (1 << 4)
++#define W25N01_M02GV_STATUS_ECC_UNCOR_ERROR (2 << 4)
++
++#if IS_ENABLED(CONFIG_MTD_SPI_NAND_W25N01KV)
++#define W25N01KV_STATUS_ECC_MASK (3 << 4)
++#define W25N01KV_STATUS_ECC_NO_BITFLIPS (0 << 4)
++#define W25N01KV_STATUS_ECC_1_3_BITFLIPS (1 << 4)
++#define W25N01KV_STATUS_ECC_4_BITFLIPS (3 << 4)
++#define W25N01KV_STATUS_ECC_UNCOR_ERROR (2 << 4)
++#endif
++
+ static SPINAND_OP_VARIANTS(read_cache_variants,
+ SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+@@ -31,6 +50,29 @@ static SPINAND_OP_VARIANTS(update_cache_
+ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
++static int w25n02kv_n04kv_ooblayout_ecc(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *region)
++{
++ return -ERANGE;
++}
++
++static int w25n02kv_n04kv_ooblayout_free(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *region)
++{
++ if (section > 3)
++ return -ERANGE;
++
++ region->offset = (16 * section) + 2;
++ region->length = 14;
++
++ return 0;
++}
++
++static const struct mtd_ooblayout_ops w25n02kv_n04kv_ooblayout = {
++ .ecc = w25n02kv_n04kv_ooblayout_ecc,
++ .free = w25n02kv_n04kv_ooblayout_free,
++};
++
+ static int w25m02gv_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+ {
+@@ -74,9 +116,63 @@ static int w25m02gv_select_target(struct
+ return spi_mem_exec_op(spinand->spimem, &op);
+ }
+
++#if IS_ENABLED(CONFIG_MTD_SPI_NAND_W25N01KV)
++static int w25n01kv_ecc_get_status(struct spinand_device *spinand,
++ u8 status)
++{
++ switch (status & W25N01KV_STATUS_ECC_MASK) {
++ case W25N01KV_STATUS_ECC_NO_BITFLIPS:
++ return 0;
++
++ case W25N01KV_STATUS_ECC_1_3_BITFLIPS:
++ return 3;
++
++ case W25N01KV_STATUS_ECC_4_BITFLIPS:
++ return 4;
++
++ case W25N01KV_STATUS_ECC_UNCOR_ERROR:
++ return -EBADMSG;
++
++ default:
++ break;
++ }
++
++ return -EINVAL;
++}
++#endif
++
++static int w25n02kv_n04kv_ecc_get_status(struct spinand_device *spinand,
++ u8 status)
++{
++ switch (status & W25N02_N04KV_STATUS_ECC_MASK) {
++ case W25N02_N04KV_STATUS_ECC_NO_BITFLIPS:
++ return 0;
++
++ case W25N02_N04KV_STATUS_ECC_1_4_BITFLIPS:
++ return 3;
++
++ case W25N02_N04KV_STATUS_ECC_5_8_BITFLIPS:
++ return 4;
++
++ /* W25N02_N04KV_use internal 8bit ECC algorithm.
++ * But the ECC strength is 4 bit requried.
++ * Return 3 if the bit bit flip count less than 5.
++ * Return 4 if the bit bit flip count more than 5 to 8.
++ */
++
++ case W25N02_N04KV_STATUS_ECC_UNCOR_ERROR:
++ return -EBADMSG;
++
++ default:
++ break;
++ }
++
++ return -EINVAL;
++}
++
+ static const struct spinand_info winbond_spinand_table[] = {
+ SPINAND_INFO("W25M02GV",
+- SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab),
++ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab, 0x21),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 2),
+ NAND_ECCREQ(1, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+@@ -85,8 +181,20 @@ static const struct spinand_info winbond
+ 0,
+ SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
+ SPINAND_SELECT_TARGET(w25m02gv_select_target)),
++#if IS_ENABLED(CONFIG_MTD_SPI_NAND_W25N01KV)
++ SPINAND_INFO("W25N01KV",
++ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa, 0x21),
++ NAND_MEMORG(1, 2048, 96, 64, 1024, 20, 1, 1, 1),
++ NAND_ECCREQ(4, 512),
++ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++ &write_cache_variants,
++ &update_cache_variants),
++ 0,
++ SPINAND_ECCINFO(&w25n02kv_n04kv_ooblayout,
++ w25n01kv_ecc_get_status)),
++#else
+ SPINAND_INFO("W25N01GV",
+- SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa),
++ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa, 0x21),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(1, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+@@ -94,6 +202,30 @@ static const struct spinand_info winbond
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)),
++#endif
++ SPINAND_INFO("W25N02KV",
++ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa, 0x22),
++ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
++ NAND_ECCREQ(4, 512),
++ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++ &write_cache_variants,
++ &update_cache_variants),
++ 0,
++ SPINAND_ECCINFO(&w25n02kv_n04kv_ooblayout,
++ w25n02kv_n04kv_ecc_get_status)),
++ /* W25N04KV has 2-die(lun), however, it can select die automatically.
++ * Treat it as single die here and double block size.
++ */
++ SPINAND_INFO("W25N04KV",
++ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa, 0x23),
++ NAND_MEMORG(1, 2048, 128, 64, 4096, 40, 2, 1, 1),
++ NAND_ECCREQ(4, 512),
++ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++ &write_cache_variants,
++ &update_cache_variants),
++ 0,
++ SPINAND_ECCINFO(&w25n02kv_n04kv_ooblayout,
++ w25n02kv_n04kv_ecc_get_status)),
+ };
+
+ static int winbond_spinand_init(struct spinand_device *spinand)
+--- a/drivers/mtd/nand/spi/Kconfig
++++ b/drivers/mtd/nand/spi/Kconfig
+@@ -6,3 +6,11 @@ menuconfig MTD_SPI_NAND
+ select SPI_MEM
+ help
+ This is the framework for the SPI NAND device drivers.
++
++config MTD_SPI_NAND_W25N01KV
++ tristate "Winbond W25N01KV Support"
++ select MTD_SPI_NAND
++ help
++ Winbond W25N01KV share the same ID with W25N01GV. However, they have
++ different attributes.
++
+--- a/drivers/mtd/nmbm/nmbm-core.c
++++ b/drivers/mtd/nmbm/nmbm-core.c
+@@ -2189,7 +2189,7 @@ static bool nmbm_check_lower_members(str
+ return false;
+ }
+
+- if (!nld->oobsize || !is_power_of_2(nld->oobsize)) {
++ if (!nld->oobsize) {
+ nmbm_log_lower(nld, NMBM_LOG_ERR,
+ "Page spare size %u is not valid\n", nld->oobsize);
+ return false;