Gitiles
Code Review Sign In
git01.mediatek.com / openwrt / feeds / mtk-openwrt-feeds / b5ea1304ccb2c23fd565d081239188f2652763e5 / . / feed / switch / src / switch_753x.c
blob: 2637ed5324ffda9bbdd036525a8ad6b10d3f02e4 [file] [log] [blame]
/*
* switch_753x.c: set for 753x switch
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#include <linux/if.h>
#include "switch_netlink.h"
#include "switch_ioctl.h"
#include "switch_fun.h"
struct mt753x_attr *attres;
int chip_name;
bool nl_init_flag;
static void usage(char *cmd)
{
printf("==================Usage===============================================================================================================================\n");
/* 1. basic operations */
printf("1) mt753x switch Basic operations=================================================================================================================>>>>\n");
printf(" 1.1) %s devs - list switch device id and model name \n", cmd);
printf(" 1.2) %s sysctl - show the ways to access kenerl driver: netlink or ioctl \n", cmd);
printf(" 1.3) %s reset - sw reset switch fsm and registers\n", cmd);
printf(" 1.4) %s reg r [offset] - read the reg with default switch \n", cmd);
printf(" 1.5) %s reg w [offset] [value] - write the reg with default switch \n", cmd);
printf(" 1.6) %s reg d [offset] - dump the reg with default switch\n", cmd);
printf(" 1.7) %s dev [devid] reg r [addr] - read the reg with the switch devid \n", cmd);
printf(" 1.8) %s dev [devid] reg w [addr] [value] - write the regs with the switch devid \n", cmd);
printf(" 1.9) %s dev [devid] reg d [addr] - dump the regs with the switch devid \n", cmd);
printf(" \n");
/* 2. phy operations */
printf("2) mt753x switch PHY operations===================================================================================================================>>>>\n");
printf(" 2.1) %s phy - dump all phy registers (clause 22)\n", cmd);
printf(" 2.2) %s phy [phy_addr] - dump phy register of specific port (clause 22)\n", cmd);
printf(" 2.3) %s phy cl22 r [port_num] [phy_reg] - read specific phy register of specific port by clause 22\n", cmd);
printf(" 2.4) %s phy cl22 w [port_num] [phy_reg] [value] - write specific phy register of specific port by clause 22\n", cmd);
printf(" 2.5) %s phy cl45 r [port_num] [dev_num] [phy_reg] - read specific phy register of specific port by clause 45\n", cmd);
printf(" 2.6) %s phy cl45 w [port_num] [dev_num] [phy_reg] [value] - write specific phy register of specific port by clause 45\n", cmd);
printf(" 2.7) %s phy fc [port_num] [enable 0|1] - set switch phy flow control, port is 0~4, enable is 1, disable is 0 \n", cmd);
printf(" 2.8) %s phy an [port_num] [enable 0|1] - set switch phy auto-negotiation, port is 0~4, enable is 1, disable is 0 \n", cmd);
printf(" 2.9) %s trreg r [port_num] [ch_addr] [node_addr] [data_addr] - read phy token-ring of specific port\n", cmd);
printf(" 2.10) %s trreg w [port_num] [ch_addr] [node_addr] [data_addr] - write phy token-ring of specific port\n", cmd);
printf(" [high_value] [low_value] \n");
printf(" 2.11) %s crossover [port_num] [mode auto|mdi|mdix] - switch auto or force mdi/mdix mode for crossover cable\n", cmd);
printf(" \n");
/* 3. mac operations */
printf("3) mt753x switch MAC operations====================================================================================================================>>>>\n");
printf(" 3.1) %s dump - dump switch mac table\n", cmd);
printf(" 3.2) %s clear - clear switch mac table\n", cmd);
printf(" 3.3) %s add [mac] [portmap] - add an entry (with portmap) to switch mac table\n", cmd);
printf(" 3.4) %s add [mac] [portmap] [vlan id] - add an entry (with portmap, vlan id) to switch mac table\n", cmd);
printf(" 3.5) %s add [mac] [portmap] [vlan id] [age] - add an entry (with portmap, vlan id, age out time) to switch mac table\n", cmd);
printf(" 3.6) %s del mac [mac] vid [vid] - delete an entry from switch mac table\n", cmd);
printf(" 3.7) %s del mac [mac] fid [fid] - delete an entry from switch mac table\n", cmd);
printf(" 3.8) %s search mac [mac] vid [vid] - search an entry with specific mac and vid\n", cmd);
printf(" 3.9) %s search mac [mac] fid [fid] - search an entry with specific mac and fid\n", cmd);
printf(" 3.10) %s filt [mac] - add a SA filtering entry (with portmap 1111111) to switch mac table\n", cmd);
printf(" 3.11) %s filt [mac] [portmap] - add a SA filtering entry (with portmap)to switch mac table\n", cmd);
printf(" 3.12) %s filt [mac] [portmap] [vlan id - add a SA filtering entry (with portmap, vlan id)to switch mac table\n", cmd);
printf(" 3.13) %s filt [mac] [portmap] [vlan id] [age] - add a SA filtering entry (with portmap, vlan id, age out time) to switch table\n", cmd);
printf(" 3.14) %s arl aging [active:0|1] [time:1~65536] - set switch arl aging timeout value \n", cmd);
printf(" 3.15) %s macctl fc [enable|disable] - set switch mac global flow control,enable is 1, disable is 0 \n", cmd);
printf(" \n");
/* 4. mib counter operations */
printf("4) mt753x switch mib counter operations============================================================================================================>>>>\n");
printf(" 4.1) %s esw_cnt get -get switch mib counters \n", cmd);
printf(" 4.2) %s esw_cnt clear -clear switch mib counters \n", cmd);
printf(" 4.3) %s output_queue_cnt get -get switch output queue counters \n", cmd);
printf(" 4.4) %s free_page get -get switch system free page counters \n", cmd);
printf(" \n");
/* 5. acl function operations */
printf("5) mt753x switch acl function operations============================================================================================================>>>>\n");
printf(" 5.1) %s acl enable [port] [port_enable:0|1] - set switch acl function enabled, port is 0~6,enable is 1, disable is 0 \n", cmd);
printf(" 5.2) %s acl etype add [ethtype] [portmap] - drop L2 ethertype packets \n", cmd);
printf(" 5.3) %s acl dmac add [mac] [portmap] - drop L2 dest-Mac packets \n", cmd);
printf(" 5.4) %s acl dip add [dip] [portmap] - drop dip packets \n", cmd);
printf(" 5.5) %s acl port add [sport] [portmap] - drop L4 UDP/TCP source port packets\n", cmd);
printf(" 5.6) %s acl L4 add [2byes] [portmap] - drop L4 packets with 2bytes payload\n", cmd);
printf(" 5.7) %s acl acltbl-add [tbl_idx:0~63/255] [vawd1] [vawd2] - set switch acl table new entry, max index-7530:63,7531:255 \n", cmd);
printf(" 5.8) %s acl masktbl-add [tbl_idx:0~31/127] [vawd1] [vawd2] - set switch acl mask table new entry, max index-7530:31,7531:127 \n", cmd);
printf(" 5.9) %s acl ruletbl-add [tbl_idx:0~31/127] [vawd1] [vawd2] - set switch acl rule table new entry, max index-7530:31,7531:127 \n", cmd);
printf(" 5.10) %s acl ratetbl-add [tbl_idx:0~31] [vawd1] [vawd2] - set switch acl rate table new entry \n", cmd);
printf(" 5.11) %s acl dip meter [dip] [portmap][meter:kbps] - rate limit dip packets \n", cmd);
printf(" 5.12) %s acl dip trtcm [dip] [portmap][CIR:kbps][CBS][PIR][PBS]- TrTCM dip packets \n", cmd);
printf(" 5.13) %s acl dip modup [dip] [portmap][usr_pri] - modify usr priority from ACL \n", cmd);
printf(" 5.14) %s acl dip pppoe [dip] [portmap] - pppoe header removal \n", cmd);
printf(" \n");
/* 6. dip table operations */
printf("6) mt753x switch dip table operations=================================================================================================================>>>>\n");
printf(" 6.1) %s dip dump - dump switch dip table\n", cmd);
printf(" 6.2) %s dip clear - clear switch dip table\n", cmd);
printf(" 6.3) %s dip add [dip] [portmap] - add a dip entry to switch table\n", cmd);
printf(" 6.4) %s dip del [dip] - del a dip entry to switch table\n", cmd);
printf(" \n");
/* 7. sip table operations */
printf("7) mt753x switch sip table operations=================================================================================================================>>>>\n");
printf(" 7.1) %s sip dump - dump switch sip table\n", cmd);
printf(" 7.2) %s sip clear - clear switch sip table\n", cmd);
printf(" 7.3) %s sip add [sip] [dip] [portmap] - add a sip entry to switch table\n", cmd);
printf(" 7.4) %s sip del [sip] [dip] - del a sip entry to switch table\n", cmd);
printf(" \n");
/* 8. vlan table operations */
printf("8) mt753x switch sip table operations====================================================================================================================>>>>\n");
printf(" 8.1) %s vlan dump (egtag) - dump switch vlan table (with per port eg_tag setting)\n", cmd);
printf(" 8.2) %s vlan set [fid:0~7] [vid] [portmap] - set vlan id and associated member at switch vlan table\n", cmd);
printf(" ([stag:0~4095] [eg_con:0|1] [egtagPortMap 0:untagged 2:tagged]) \n");
printf(" Full Example: %s vlan set 0 3 10000100 0 0 20000200\n", cmd);
printf(" 8.3) %s vlan vid [vlan idx] [active:0|1] [vid] [portMap] - set switch vlan vid elements \n", cmd);
printf(" [egtagPortMap] [ivl_en] [fid] [stag] \n");
printf(" 8.4) %s vlan pvid [port] [pvid] - set switch vlan pvid \n", cmd);
printf(" 8.5) %s vlan acc-frm [port] [acceptable_frame_type:0~3] - set switch vlan acceptable_frame type : admit all frames: 0, \n", cmd);
printf(" admit only vlan-taged frames: 1,admit only untagged or priority-tagged frames: 2, reserved:3 \n");
printf(" 8.6) %s vlan port-attr [port] [attr:0~3] - set switch vlan port attribute: user port: 0, statck port: 1, \n", cmd);
printf(" translation port: 2, transparent port:3 \n");
printf(" 8.7) %s vlan port-mode [port] [mode:0~3] - set switch vlan port mode : port matrix mode: 0, fallback mode: 1, \n", cmd);
printf(" check mode: 2, security mode:3 \n");
printf(" 8.8) %s vlan eg-tag-pvc [port] [eg_tag:0~7] - set switch vlan eg tag pvc : disable: 0, consistent: 1, reserved: 2, \n", cmd);
printf(" reserved:3,untagged:4,swap:5,tagged:6, stack:7 \n");
printf(" 8.9) %s vlan eg-tag-pcr [port] [eg_tag:0~3] - set switch vlan eg tag pcr : untagged: 0, swap: 1, tagged: 2, stack:3 \n", cmd);
printf(" \n");
/* 9. rate limit operations */
printf("9) mt753x switch rate limit operations=================================================================================================================>>>>\n");
printf(" 9.1) %s ratectl [in_ex_gress:0|1] [port] [rate] - set switch port ingress(1) or egress(0) rate \n", cmd);
printf(" 9.2) %s ingress-rate on [port] [Kbps] - set ingress rate limit on port n (n= 0~ switch max port) \n", cmd);
printf(" 9.3) %s egress-rate on [port] [Kbps] - set egress rate limit on port n (n= 0~ switch max port) \n", cmd);
printf(" 9.4) %s ingress-rate off [port] - disable ingress rate limit on port n (n= 0~ switch max port) \n", cmd);
printf(" 9.5) %s egress-rate off [port] - disable egress rate limit on port n (n= 0~ switch max port)\n", cmd);
printf(" \n");
/* 10. igmp operations */
printf("10) mt753x igmp operations===============================================================================================================================>>>>\n");
printf(" 10.1) %s igmpsnoop on [leaky_en] [wan_num] - turn on IGMP snoop and router port learning\n", cmd);
printf(" leaky_en: 1 or 0. default 0; wan_num: 0 or 4. default 4\n");
printf(" 10.2) %s igmpsnoop off - turn off IGMP snoop and router port learning\n", cmd);
printf(" 10.3) %s igmpsnoop enable [port#] - enable IGMP HW leave/join/Squery/Gquery\n", cmd);
printf(" 10.4) %s igmpsnoop disable [port#] - disable IGMP HW leave/join/Squery/Gquery\n", cmd);
printf(" \n");
/* 11. QoS operations */
printf("11) mt753x QoS operations================================================================================================================================>>>>\n");
printf(" 11.1) %s qos sch [port:0~6] [queue:0~7] [shaper:min|max] [type:rr:0|sp:1|wfq:2] - set switch qos sch type\n", cmd);
printf(" 11.2) %s qos base [port:0~6] [base] - set switch qos base(UPW); port-based:0, tag-based:1, \n", cmd);
printf(" dscp-based:2, acl-based:3, arl-based:4, stag-based:5 \n");
printf(" 11.3) %s qos port-weight [port:0~6] [q0] [q1][q2][q3] - set switch qos port queue weight; \n", cmd);
printf(" [q4][q5][q6][q7] [qn]: the weight of queue n, range: 1~16 \n");
printf(" 11.4) %s qos port-prio [port:0~6] [prio:0~7] - set switch port qos user priority; port is 0~6, priority is 0~7 \n", cmd);
printf(" 11.5) %s qos dscp-prio [dscp:0~63] [prio:0~7] - set switch qos dscp user priority; dscp is 0~63, priority is 0~7 \n", cmd);
printf(" 11.6) %s qos prio-qmap [port:0~6] [prio:0~7] [queue:0~7] - set switch qos priority queue map; priority is 0~7,queue is 0~7 \n", cmd);
printf(" \n");
/*12. port mirror operations*/
printf(" 12) mt753x port mirror operations========================================================================================================================>>>>\n");
printf(" 12.1) %s mirror monitor [port] - enable port mirror and indicate monitor port number\n", cmd);
printf(" 12.2) %s mirror target [port] - set port mirror target\n", cmd);
printf(" [direction| 0:off, 1:rx, 2:tx, 3:all] \n");
printf(" 12.3) %s mirror enable [mirror_en:0|1] [mirror_port: 0-6] - set switch mirror function enable(1) or disabled(0) for port 0~6 \n", cmd);
printf(" 12.4) %s mirror port-based [port] [port_tx_mir:0|1] - set switch mirror port: target tx/rx/acl/vlan/igmp\n", cmd);
printf(" [port_rx_mir:0|1] [acl_mir:0|1] \n");
printf(" [vlan_mis:0|1] [igmp_mir:0|1] \n");
printf(" \n");
/*13. stp function*/
printf(" 13) mt753x stp operations===============================================================================================================================>>>>\n");
printf(" 13.1) %s stp [port] [fid] [state] - set switch spanning tree state, port is 0~6, fid is 0~7, \n", cmd);
printf(" state is 0~3(Disable/Discarding:0,Blocking/Listening/Discarding:1,) \n");
printf(" Learning:2,Forwarding:3 \n");
printf(" \n");
/*14. collision pool operations*/
printf("14) mt753x collision pool operations========================================================================================================================>>>>\n");
printf(" 14.1) %s collision-pool enable [enable 0|1] - enable or disable collision pool\n", cmd);
printf(" 14.2) %s collision-pool mac dump - dump collision pool mac table\n", cmd);
printf(" 14.3) %s collision-pool dip dump - dump collision pool dip table\n", cmd);
printf(" 14.4) %s collision-pool sip dump - dump collision pool sip table\n", cmd);
printf(" \n");
/*15. pfc(priority flow control) operations*/
printf("15) mt753x pfc(priority flow control) operations==============================================================================================================>>>>\n");
printf(" 15.1) %s pfc enable [port] [enable 0|1] - enable or disable port's pfc \n", cmd);
printf(" 15.2) %s pfc rx_counter [port] - get port n pfc 8 up rx counter \n", cmd);
printf(" 15.3) %s pfc tx_counter [port] - get port n pfc 8 up rx counter \n", cmd);
printf(" \n");
/*15. pfc(priority flow control) operations*/
printf("16) mt753x EEE(802.3az) operations==============================================================================================================>>>>\n");
printf(" 16.1) %s eee enable [enable 0|1] ([portMap]) - enable or disable EEE (by portMap)\n", cmd);
printf(" 16.2) %s eee dump ([port]) - dump EEE capability (by port)\n", cmd);
printf(" \n");
exit_free();
exit(0);
}
static void parse_reg_cmd(int argc, char *argv[], int len)
{
unsigned int val;
unsigned int off;
int i, j;
if (!strncmp(argv[len - 3], "reg", 4)) {
if (argv[len - 2][0] == 'r') {
off = strtoul(argv[len - 1], NULL, 16);
reg_read(off, &val);
printf(" Read reg=%x, value=%x\n", off, val);
} else if (argv[len - 2][0] == 'w') {
off = strtoul(argv[len - 1], NULL, 16);
if (argc != len + 1)
usage(argv[0]);
val = strtoul(argv[len], NULL, 16);
reg_write(off, val);
printf(" Write reg=%x, value=%x\n", off, val);
} else if (argv[len - 2][0] == 'd') {
off = strtoul(argv[len - 1], NULL, 16);
for (i = 0; i < 16; i++) {
printf("0x%08x: ", off + 0x10 * i);
for (j = 0; j < 4; j++) {
reg_read(off + i * 0x10 + j * 0x4, &val);
printf(" 0x%08x", val);
}
printf("\n");
}
} else
usage(argv[0]);
} else
usage(argv[0]);
}
static int get_chip_name()
{
int temp;
FILE *fp = NULL;
char buff[255];
/*judge 7530*/
reg_read((0x7ffc), &temp);
temp = temp >> 16;
if (temp == 0x7530)
return temp;
/*judge 7531*/
reg_read(0x781c, &temp);
temp = temp >> 16;
if (temp == 0x7531)
return temp;
/*judge jaguar embedded switch*/
fp = fopen("/proc/device-tree/compatible", "r");
if (fp != NULL) {
temp = -1;
if (fgets(buff, 255, (FILE *)fp) && strstr(buff, "mt7988"))
temp = 0x7988;
fclose(fp);
return temp;
}
return -1;
}
static int phy_operate(int argc, char *argv[])
{
unsigned int port_num;
unsigned int dev_num;
unsigned int value;
unsigned int reg;
int ret = 0;
char op;
if (strncmp(argv[2], "cl22", 4) && strncmp(argv[2], "cl45", 4))
usage(argv[0]);
op = argv[3][0];
switch(op) {
case 'r':
reg = strtoul(argv[argc-1], NULL, 0);
if (argc == 6) {
port_num = strtoul(argv[argc-2], NULL, 0);
ret = mii_mgr_read(port_num, reg, &value);
if (ret < 0)
printf(" Phy read reg fail\n");
else
printf(" Phy read reg=0x%x, value=0x%x\n", reg, value);
} else if (argc == 7) {
dev_num = strtoul(argv[argc-2], NULL, 0);
port_num = strtoul(argv[argc-3], NULL, 0);
ret = mii_mgr_c45_read(port_num, dev_num, reg, &value);
if (ret < 0)
printf(" Phy read reg fail\n");
else
printf(" Phy read reg=0x%x, value=0x%x\n", reg, value);
} else
ret = phy_dump(32);
break;
case 'w':
reg = strtoul(argv[argc-2], NULL, 0);
value = strtoul(argv[argc-1], NULL, 0);
if (argc == 7) {
port_num = strtoul(argv[argc-3], NULL, 0);
ret = mii_mgr_write(port_num, reg, value);
}
else if (argc == 8) {
dev_num = strtoul(argv[argc-3], NULL, 0);
port_num = strtoul(argv[argc-4], NULL, 0);
ret = mii_mgr_c45_write(port_num, dev_num, reg, value);
}
else
usage(argv[0]);
break;
default:
break;
}
return ret;
}
int main(int argc, char *argv[])
{
int err;
attres = (struct mt753x_attr *)malloc(sizeof(struct mt753x_attr));
attres->dev_id = -1;
attres->port_num = -1;
attres->phy_dev = -1;
nl_init_flag = true;
/* dsa netlink family might not be enabled. Try gsw netlink family. */
err = mt753x_netlink_init(MT753X_DSA_GENL_NAME);
if (!err)
chip_name = get_chip_name();
if (err < 0) {
err = mt753x_netlink_init(MT753X_GENL_NAME);
if (!err)
chip_name = get_chip_name();
}
if (err < 0) {
err = switch_ioctl_init();
if (!err) {
nl_init_flag = false;
chip_name = get_chip_name();
if (chip_name < 0) {
printf("no chip unsupport or chip id is invalid!\n");
exit_free();
exit(0);
}
}
}
if (argc < 2)
usage(argv[0]);
if (!strcmp(argv[1], "dev")) {
attres->dev_id = strtoul(argv[2], NULL, 0);
argv += 2;
argc -= 2;
if (argc < 2)
usage(argv[0]);
}
if (argc == 2) {
if (!strcmp(argv[1], "devs")) {
attres->type = MT753X_ATTR_TYPE_MESG;
mt753x_list_swdev(attres, MT753X_CMD_REQUEST);
} else if (!strncmp(argv[1], "dump", 5)) {
table_dump();
} else if (!strncmp(argv[1], "clear", 6)) {
table_clear();
printf("done.\n");
} else if (!strncmp(argv[1], "reset", 5)) {
switch_reset(argc, argv);
} else if (!strncmp(argv[1], "phy", 4)) {
phy_dump(32); //dump all phy register
} else if (!strncmp(argv[1], "sysctl", 7)) {
if (nl_init_flag)
printf("netlink(%s)\n",MT753X_GENL_NAME);
else
printf("ioctl(%s)\n",ETH_DEVNAME);
} else
usage(argv[0]);
} else if (!strncmp(argv[1], "arl", 4)) {
if (!strncmp(argv[2], "aging", 6))
doArlAging(argc, argv);
} else if (!strncmp(argv[1], "esw_cnt", 8)) {
if (!strncmp(argv[2], "get", 4))
read_mib_counters();
else if (!strncmp(argv[2], "clear", 6))
clear_mib_counters();
else
usage(argv[0]);
}else if (!strncmp(argv[1], "output_queue_cnt", 17)) {
if (!strncmp(argv[2], "get", 4))
read_output_queue_counters();
else
usage(argv[0]);
}else if (!strncmp(argv[1], "free_page", 10)) {
if (!strncmp(argv[2], "get", 4))
read_free_page_counters();
else
usage(argv[0]);
}
else if (!strncmp(argv[1], "ratectl", 8))
rate_control(argc, argv);
else if (!strncmp(argv[1], "add", 4))
table_add(argc, argv);
else if (!strncmp(argv[1], "filt", 5))
table_add(argc, argv);
else if (!strncmp(argv[1], "del", 4)) {
if (!strncmp(argv[4], "fid", 4))
table_del_fid(argc, argv);
else if (!strncmp(argv[4], "vid", 4))
table_del_vid(argc, argv);
else
usage(argv[0]);
} else if (!strncmp(argv[1], "search", 7)) {
if (!strncmp(argv[4], "fid", 4))
table_search_mac_fid(argc, argv);
else if (!strncmp(argv[4], "vid", 4))
table_search_mac_vid(argc, argv);
else
usage(argv[0]);
} else if (!strncmp(argv[1], "phy", 4)) {
if (argc == 3) {
int phy_addr = strtoul(argv[2], NULL, 0);
if (phy_addr < 0 || phy_addr > 31)
usage(argv[0]);
phy_dump(phy_addr);
} else if (argc == 5) {
if (!strncmp(argv[2], "fc", 2))
phy_set_fc(argc, argv);
else if (!strncmp(argv[2], "an", 2))
phy_set_an(argc, argv);
else
phy_dump(32);
} else
phy_operate(argc, argv);
} else if (!strncmp(argv[1], "trreg", 4)) {
if (rw_phy_token_ring(argc, argv) < 0)
usage(argv[0]);
} else if (!strncmp(argv[1], "macctl", 7)) {
if (argc < 3)
usage(argv[0]);
if (!strncmp(argv[2], "fc", 3))
global_set_mac_fc(argc, argv);
else if (!strncmp(argv[2], "pfc", 4))
set_mac_pfc(argc, argv);
else
usage(argv[0]);
} else if (!strncmp(argv[1], "qos", 4)) {
if (argc < 3)
usage(argv[0]);
if (!strncmp(argv[2], "sch", 4))
qos_sch_select(argc, argv);
else if (!strncmp(argv[2], "base", 5))
qos_set_base(argc, argv);
else if (!strncmp(argv[2], "port-weight", 12))
qos_wfq_set_weight(argc, argv);
else if (!strncmp(argv[2], "port-prio", 10))
qos_set_portpri(argc, argv);
else if (!strncmp(argv[2], "dscp-prio", 10))
qos_set_dscppri(argc, argv);
else if (!strncmp(argv[2], "prio-qmap", 10))
qos_pri_mapping_queue(argc, argv);
else
usage(argv[0]);
} else if (!strncmp(argv[1], "stp", 3)) {
if (argc < 3)
usage(argv[0]);
else
doStp(argc, argv);
} else if (!strncmp(argv[1], "sip", 5)) {
if (argc < 3)
usage(argv[0]);
if (!strncmp(argv[2], "dump", 5))
sip_dump();
else if (!strncmp(argv[2], "add", 4))
sip_add(argc, argv);
else if (!strncmp(argv[2], "del", 4))
sip_del(argc, argv);
else if (!strncmp(argv[2], "clear", 6))
sip_clear();
else
usage(argv[0]);
} else if (!strncmp(argv[1], "dip", 4)) {
if (argc < 3)
usage(argv[0]);
if (!strncmp(argv[2], "dump", 5))
dip_dump();
else if (!strncmp(argv[2], "add", 4))
dip_add(argc, argv);
else if (!strncmp(argv[2], "del", 4))
dip_del(argc, argv);
else if (!strncmp(argv[2], "clear", 6))
dip_clear();
else
usage(argv[0]);
} else if (!strncmp(argv[1], "mirror", 7)) {
if (argc < 3)
usage(argv[0]);
if (!strncmp(argv[2], "monitor", 8))
set_mirror_to(argc, argv);
else if (!strncmp(argv[2], "target", 7))
set_mirror_from(argc, argv);
else if (!strncmp(argv[2], "enable", 7))
doMirrorEn(argc, argv);
else if (!strncmp(argv[2], "port-based", 11))
doMirrorPortBased(argc, argv);
else
usage(argv[0]);
} else if (!strncmp(argv[1], "acl", 4)) {
if (argc < 3)
usage(argv[0]);
if (!strncmp(argv[2], "dip", 4)) {
if (!strncmp(argv[3], "add", 4))
acl_dip_add(argc, argv);
else if (!strncmp(argv[3], "modup", 6))
acl_dip_modify(argc, argv);
else if (!strncmp(argv[3], "pppoe", 6))
acl_dip_pppoe(argc, argv);
else if (!strncmp(argv[3], "trtcm", 4))
acl_dip_trtcm(argc, argv);
else if (!strncmp(argv[3], "meter", 6))
acl_dip_meter(argc, argv);
else
usage(argv[0]);
} else if (!strncmp(argv[2], "dmac", 6)) {
if (!strncmp(argv[3], "add", 4))
acl_mac_add(argc, argv);
else
usage(argv[0]);
} else if (!strncmp(argv[2], "etype", 6)) {
if (!strncmp(argv[3], "add", 4))
acl_ethertype(argc, argv);
else
usage(argv[0]);
} else if (!strncmp(argv[2], "port", 5)) {
if (!strncmp(argv[3], "add", 4))
acl_sp_add(argc, argv);
else
usage(argv[0]);
} else if (!strncmp(argv[2], "L4", 5)) {
if (!strncmp(argv[3], "add", 4))
acl_l4_add(argc, argv);
else
usage(argv[0]);
} else if (!strncmp(argv[2], "enable", 7))
acl_port_enable(argc, argv);
else if (!strncmp(argv[2], "acltbl-add", 11))
acl_table_add(argc, argv);
else if (!strncmp(argv[2], "masktbl-add", 12))
acl_mask_table_add(argc, argv);
else if (!strncmp(argv[2], "ruletbl-add", 12))
acl_rule_table_add(argc, argv);
else if (!strncmp(argv[2], "ratetbl-add", 12))
acl_rate_table_add(argc, argv);
else
usage(argv[0]);
} else if (!strncmp(argv[1], "vlan", 5)) {
if (argc < 3)
usage(argv[0]);
if (!strncmp(argv[2], "dump", 5))
vlan_dump(argc, argv);
else if (!strncmp(argv[2], "set", 4))
vlan_set(argc, argv);
else if (!strncmp(argv[2], "clear", 6))
vlan_clear(argc, argv);
else if (!strncmp(argv[2], "vid", 4))
doVlanSetVid(argc, argv);
else if (!strncmp(argv[2], "pvid", 5))
doVlanSetPvid(argc, argv);
else if (!strncmp(argv[2], "acc-frm", 8))
doVlanSetAccFrm(argc, argv);
else if (!strncmp(argv[2], "port-attr", 10))
doVlanSetPortAttr(argc, argv);
else if (!strncmp(argv[2], "port-mode", 10))
doVlanSetPortMode(argc, argv);
else if (!strncmp(argv[2], "eg-tag-pcr", 11))
doVlanSetEgressTagPCR(argc, argv);
else if (!strncmp(argv[2], "eg-tag-pvc", 11))
doVlanSetEgressTagPVC(argc, argv);
else
usage(argv[0]);
} else if (!strncmp(argv[1], "reg", 4)) {
parse_reg_cmd(argc, argv, 4);
} else if (!strncmp(argv[1], "ingress-rate", 6)) {
int port = 0, bw = 0;
if (argv[2][1] == 'n') {
port = strtoul(argv[3], NULL, 0);
bw = strtoul(argv[4], NULL, 0);
if (ingress_rate_set(1, port, bw) == 0)
printf("switch port=%d, bw=%d\n", port, bw);
}
else if (argv[2][1] == 'f') {
if (argc != 4)
usage(argv[0]);
port = strtoul(argv[3], NULL, 0);
if (ingress_rate_set(0, port, bw) == 0)
printf("switch port=%d ingress rate limit off\n", port);
} else
usage(argv[0]);
} else if (!strncmp(argv[1], "egress-rate", 6)) {
int port = 0, bw = 0;
if (argv[2][1] == 'n') {
port = strtoul(argv[3], NULL, 0);
bw = strtoul(argv[4], NULL, 0);
if (egress_rate_set(1, port, bw) == 0)
printf("switch port=%d, bw=%d\n", port, bw);
} else if (argv[2][1] == 'f') {
if (argc != 4)
usage(argv[0]);
port = strtoul(argv[3], NULL, 0);
if (egress_rate_set(0, port, bw) == 0)
printf("switch port=%d egress rate limit off\n", port);
} else
usage(argv[0]);
} else if (!strncmp(argv[1], "igmpsnoop", 10)) {
if (argc < 3)
usage(argv[0]);
if (!strncmp(argv[2], "on", 3))
igmp_on(argc, argv);
else if (!strncmp(argv[2], "off", 4))
igmp_off();
else if (!strncmp(argv[2], "enable", 7))
igmp_enable(argc, argv);
else if (!strncmp(argv[2], "disable", 8))
igmp_disable(argc, argv);
else
usage(argv[0]);
} else if (!strncmp(argv[1], "collision-pool", 15)) {
if (argc < 3)
usage(argv[0]);
if (!strncmp(argv[2], "enable", 7))
collision_pool_enable(argc, argv);
else if (!strncmp(argv[2], "mac", 4)){
if (!strncmp(argv[3], "dump", 5))
collision_pool_mac_dump();
else
usage(argv[0]);
} else if (!strncmp(argv[2], "dip", 4)){
if (!strncmp(argv[3], "dump", 5))
collision_pool_dip_dump();
else
usage(argv[0]);
} else if (!strncmp(argv[2], "sip", 4)){
if (!strncmp(argv[3], "dump", 5))
collision_pool_sip_dump();
else
usage(argv[0]);
}
else
usage(argv[0]);
} else if (!strncmp(argv[1], "pfc", 15)) {
if (argc < 4 || argc > 5)
usage(argv[0]);
if (!strncmp(argv[2], "enable", 7))
set_mac_pfc(argc, argv);
else if (!strncmp(argv[2], "rx_counter", 11)){
pfc_get_rx_counter(argc, argv);
} else if (!strncmp(argv[2], "tx_counter", 11)){
pfc_get_tx_counter(argc, argv);
} else
usage(argv[0]);
} else if (!strncmp(argv[1], "crossover", 10)) {
if (argc < 4)
usage(argv[0]);
else
phy_crossover(argc, argv);
} else if (!strncmp(argv[1], "eee", 4)) {
if (argc < 3)
usage(argv[0]);
if (!strncmp(argv[2], "enable", 7) ||
!strncmp(argv[2], "disable", 8))
eee_enable(argc, argv);
else if (!strncmp(argv[2], "dump", 5))
eee_dump(argc, argv);
else
usage(argv[0]);
} else
usage(argv[0]);
exit_free();
return 0;
}