| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| /* |
| * Copyright (C) 2021 MediaTek Inc. |
| * Author: Sam.Shih <sam.shih@mediatek.com> |
| */ |
| |
| /dts-v1/; |
| #include "mt7988.dtsi" |
| |
| / { |
| model = "MediaTek MT7988D GSW 10G SFP SPIM-NAND RFB"; |
| compatible = "mediatek,mt7988d-gsw-10g-sfp-spim-snand", |
| /* Reserve this for DVFS if creating new dts */ |
| "mediatek,mt7988"; |
| |
| chosen { |
| bootargs = "console=ttyS0,115200n1 loglevel=8 \ |
| earlycon=uart8250,mmio32,0x11000000"; |
| }; |
| |
| cpus { |
| /delete-node/ cpu@3; |
| }; |
| |
| gsw: gsw@0 { |
| compatible = "mediatek,mt753x"; |
| mediatek,sysctrl = <ðwarp>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| memory { |
| reg = <0 0x40000000 0 0x10000000>; |
| }; |
| |
| nmbm_spim_nand { |
| compatible = "generic,nmbm"; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| lower-mtd-device = <&spi_nand>; |
| forced-create; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "BL2"; |
| reg = <0x00000 0x0100000>; |
| read-only; |
| }; |
| |
| partition@100000 { |
| label = "u-boot-env"; |
| reg = <0x0100000 0x0080000>; |
| }; |
| |
| factory: partition@180000 { |
| label = "Factory"; |
| reg = <0x180000 0x0400000>; |
| }; |
| |
| partition@580000 { |
| label = "FIP"; |
| reg = <0x580000 0x0200000>; |
| }; |
| |
| partition@780000 { |
| label = "ubi"; |
| reg = <0x780000 0x7080000>; |
| }; |
| }; |
| }; |
| |
| wsys_adie: wsys_adie@0 { |
| // fpga cases need to manual change adie_id / sku_type for dvt only |
| compatible = "mediatek,rebb-mt7988-adie"; |
| adie_id = <7976>; |
| sku_type = <3000>; |
| }; |
| |
| sfp_esp0: sfp@0 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c1>; |
| mod-def0-gpios = <&pio 0 1>; |
| los-gpios = <&pio 30 0>; |
| tx-disable-gpios = <&pio 29 0>; |
| }; |
| }; |
| |
| &fan { |
| pwms = <&pwm 0 50000 0>; |
| status = "okay"; |
| }; |
| |
| &i2c0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pins>; |
| status = "okay"; |
| |
| rt5190a_64: rt5190a@64 { |
| compatible = "richtek,rt5190a"; |
| reg = <0x64>; |
| /*interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;*/ |
| vin2-supply = <&rt5190_buck1>; |
| vin3-supply = <&rt5190_buck1>; |
| vin4-supply = <&rt5190_buck1>; |
| |
| regulators { |
| rt5190_buck1: buck1 { |
| regulator-name = "rt5190a-buck1"; |
| regulator-min-microvolt = <5090000>; |
| regulator-max-microvolt = <5090000>; |
| regulator-allowed-modes = |
| <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>; |
| regulator-boot-on; |
| }; |
| buck2 { |
| regulator-name = "vcore"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <1400000>; |
| regulator-boot-on; |
| }; |
| buck3 { |
| regulator-name = "proc"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <1400000>; |
| regulator-boot-on; |
| }; |
| buck4 { |
| regulator-name = "rt5190a-buck4"; |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <850000>; |
| regulator-allowed-modes = |
| <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>; |
| regulator-boot-on; |
| }; |
| ldo { |
| regulator-name = "rt5190a-ldo"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-boot-on; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pins>; |
| status = "okay"; |
| }; |
| |
| &pwm { |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| }; |
| |
| &spi0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_flash_pins>; |
| status = "okay"; |
| |
| spi_nand: spi_nand@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "spi-nand"; |
| spi-cal-enable; |
| spi-cal-mode = "read-data"; |
| spi-cal-datalen = <7>; |
| spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>; |
| spi-cal-addrlen = <5>; |
| spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; |
| reg = <0>; |
| spi-max-frequency = <52000000>; |
| spi-tx-bus-width = <4>; |
| spi-rx-bus-width = <4>; |
| }; |
| }; |
| |
| &spi1 { |
| pinctrl-names = "default"; |
| /* pin shared with snfi */ |
| pinctrl-0 = <&spic_pins>; |
| status = "disabled"; |
| }; |
| |
| &pcie0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pcie0_pins>; |
| status = "okay"; |
| }; |
| |
| &pcie1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pcie1_pins>; |
| status = "disabled"; |
| }; |
| |
| &pcie2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pcie2_pins>; |
| status = "disabled"; |
| }; |
| |
| &pcie3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pcie3_pins>; |
| status = "okay"; |
| }; |
| |
| &pio { |
| gbe0_led0_pins: gbe0-pins { |
| mux { |
| function = "led"; |
| groups = "gbe0_led0"; |
| }; |
| }; |
| |
| gbe1_led0_pins: gbe1-pins { |
| mux { |
| function = "led"; |
| groups = "gbe1_led0"; |
| }; |
| }; |
| |
| gbe2_led0_pins: gbe2-pins { |
| mux { |
| function = "led"; |
| groups = "gbe2_led0"; |
| }; |
| }; |
| |
| gbe3_led0_pins: gbe3-pins { |
| mux { |
| function = "led"; |
| groups = "gbe3_led0"; |
| }; |
| }; |
| |
| i2p5gbe_led0_pins: 2p5gbe-pins { |
| mux { |
| function = "led"; |
| groups = "2p5gbe_led0"; |
| }; |
| }; |
| |
| i2c0_pins: i2c0-pins-g0 { |
| mux { |
| function = "i2c"; |
| groups = "i2c0_1"; |
| }; |
| }; |
| |
| i2c1_pins: i2c1-pins-g0 { |
| mux { |
| function = "i2c"; |
| groups = "i2c1_sfp"; |
| }; |
| }; |
| |
| pcie0_pins: pcie0-pins { |
| mux { |
| function = "pcie"; |
| groups = "pcie_2l_0_pereset", "pcie_clk_req_n0_0", |
| "pcie_wake_n0_0"; |
| }; |
| }; |
| |
| pcie1_pins: pcie1-pins { |
| mux { |
| function = "pcie"; |
| groups = "pcie_2l_1_pereset", "pcie_clk_req_n1", |
| "pcie_wake_n1_0"; |
| }; |
| }; |
| |
| pcie2_pins: pcie2-pins { |
| mux { |
| function = "pcie"; |
| groups = "pcie_1l_0_pereset", "pcie_clk_req_n2_0", |
| "pcie_wake_n2_0"; |
| }; |
| }; |
| |
| pcie3_pins: pcie3-pins { |
| mux { |
| function = "pcie"; |
| groups = "pcie_1l_1_pereset", "pcie_clk_req_n3", |
| "pcie_wake_n3_0"; |
| }; |
| }; |
| |
| spi0_flash_pins: spi0-pins { |
| mux { |
| function = "spi"; |
| groups = "spi0", "spi0_wp_hold"; |
| }; |
| }; |
| |
| spic_pins: spi1-pins { |
| mux { |
| function = "spi"; |
| groups = "spi1"; |
| }; |
| }; |
| }; |
| |
| &watchdog { |
| status = "disabled"; |
| }; |
| |
| ð { |
| status = "okay"; |
| |
| gmac0: mac@0 { |
| compatible = "mediatek,eth-mac"; |
| reg = <0>; |
| mac-type = "xgdm"; |
| phy-mode = "10gbase-kr"; |
| |
| fixed-link { |
| speed = <10000>; |
| full-duplex; |
| pause; |
| }; |
| }; |
| |
| gmac1: mac@1 { |
| compatible = "mediatek,eth-mac"; |
| reg = <1>; |
| mac-type = "xgdm"; |
| phy-mode = "xgmii"; |
| phy-handle = <&phy0>; |
| }; |
| |
| gmac2: mac@2 { |
| compatible = "mediatek,eth-mac"; |
| reg = <2>; |
| mac-type = "xgdm"; |
| phy-mode = "10gbase-kr"; |
| managed = "in-band-status"; |
| sfp = <&sfp_esp0>; |
| }; |
| |
| mdio: mdio-bus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| phy0: ethernet-phy@0 { |
| pinctrl-names = "i2p5gbe-led"; |
| pinctrl-0 = <&i2p5gbe_led0_pins>; |
| reg = <15>; |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| phy-mode = "xgmii"; |
| }; |
| |
| }; |
| }; |
| |
| &hnat { |
| mtketh-wan = "eth1"; |
| mtketh-lan = "eth0"; |
| mtketh-lan2 = "eth2"; |
| mtketh-max-gmac = <3>; |
| status = "okay"; |
| }; |
| |
| &gsw { |
| mediatek,mdio = <&mdio>; |
| mediatek,portmap = "llllw"; |
| mediatek,mdio_master_pinmux = <1>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; |
| status = "okay"; |
| |
| port6: port@6 { |
| compatible = "mediatek,mt753x-port"; |
| mediatek,ssc-on; |
| phy-mode = "10gbase-kr"; |
| reg = <6>; |
| fixed-link { |
| speed = <10000>; |
| full-duplex; |
| }; |
| }; |
| |
| mdio1: mdio-bus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| gsw_phy0: ethernet-phy@0 { |
| compatible = "ethernet-phy-id03a2.9481"; |
| reg = <0>; |
| pinctrl-names = "gbe-led"; |
| pinctrl-0 = <&gbe0_led0_pins>; |
| nvmem-cells = <&phy_calibration_p0>; |
| nvmem-cell-names = "phy-cal-data"; |
| }; |
| |
| gsw_phy1: ethernet-phy@1 { |
| compatible = "ethernet-phy-id03a2.9481"; |
| reg = <1>; |
| pinctrl-names = "gbe-led"; |
| pinctrl-0 = <&gbe1_led0_pins>; |
| nvmem-cells = <&phy_calibration_p1>; |
| nvmem-cell-names = "phy-cal-data"; |
| }; |
| |
| gsw_phy2: ethernet-phy@2 { |
| compatible = "ethernet-phy-id03a2.9481"; |
| reg = <2>; |
| pinctrl-names = "gbe-led"; |
| pinctrl-0 = <&gbe2_led0_pins>; |
| nvmem-cells = <&phy_calibration_p2>; |
| nvmem-cell-names = "phy-cal-data"; |
| }; |
| |
| gsw_phy3: ethernet-phy@3 { |
| compatible = "ethernet-phy-id03a2.9481"; |
| reg = <3>; |
| pinctrl-names = "gbe-led"; |
| pinctrl-0 = <&gbe3_led0_pins>; |
| nvmem-cells = <&phy_calibration_p3>; |
| nvmem-cell-names = "phy-cal-data"; |
| }; |
| }; |
| }; |