| /* |
| * switch_753x.c: set for 753x switch |
| */ |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <unistd.h> |
| #include <string.h> |
| #include <sys/ioctl.h> |
| #include <sys/socket.h> |
| #include <linux/if.h> |
| |
| #include "switch_netlink.h" |
| #include "switch_ioctl.h" |
| #include "switch_fun.h" |
| |
| struct mt753x_attr *attres; |
| int chip_name; |
| bool nl_init_flag; |
| |
| static void usage(char *cmd) |
| { |
| printf("==================Usage===============================================================================================================================\n"); |
| |
| /* 1. basic operations */ |
| printf("1) mt753x switch Basic operations=================================================================================================================>>>>\n"); |
| printf(" 1.1) %s devs - list switch device id and model name \n", cmd); |
| printf(" 1.2) %s sysctl - show the ways to access kenerl driver: netlink or ioctl \n", cmd); |
| printf(" 1.3) %s reset - sw reset switch fsm and registers\n", cmd); |
| printf(" 1.4) %s reg r [offset] - read the reg with default switch \n", cmd); |
| printf(" 1.5) %s reg w [offset] [value] - write the reg with default switch \n", cmd); |
| printf(" 1.6) %s reg d [offset] - dump the reg with default switch\n", cmd); |
| printf(" 1.7) %s dev [devid] reg r [addr] - read the reg with the switch devid \n", cmd); |
| printf(" 1.8) %s dev [devid] reg w [addr] [value] - write the regs with the switch devid \n", cmd); |
| printf(" 1.9) %s dev [devid] reg d [addr] - dump the regs with the switch devid \n", cmd); |
| printf(" \n"); |
| |
| /* 2. phy operations */ |
| printf("2) mt753x switch PHY operations===================================================================================================================>>>>\n"); |
| printf(" 2.1) %s phy - dump all phy registers (clause 22)\n", cmd); |
| printf(" 2.2) %s phy [phy_addr] - dump phy register of specific port (clause 22)\n", cmd); |
| printf(" 2.3) %s phy cl22 r [port_num] [phy_reg] - read specific phy register of specific port by clause 22\n", cmd); |
| printf(" 2.4) %s phy cl22 w [port_num] [phy_reg] [value] - write specific phy register of specific port by clause 22\n", cmd); |
| printf(" 2.5) %s phy cl45 r [port_num] [dev_num] [phy_reg] - read specific phy register of specific port by clause 45\n", cmd); |
| printf(" 2.6) %s phy cl45 w [port_num] [dev_num] [phy_reg] [value] - write specific phy register of specific port by clause 45\n", cmd); |
| printf(" 2.7) %s phy fc [port_num] [enable 0|1] - set switch phy flow control, port is 0~4, enable is 1, disable is 0 \n", cmd); |
| printf(" 2.8) %s phy an [port_num] [enable 0|1] - set switch phy auto-negotiation, port is 0~4, enable is 1, disable is 0 \n", cmd); |
| printf(" 2.9) %s trreg r [port_num] [ch_addr] [node_addr] [data_addr] - read phy token-ring of specific port\n", cmd); |
| printf(" 2.10) %s trreg w [port_num] [ch_addr] [node_addr] [data_addr] - write phy token-ring of specific port\n", cmd); |
| printf(" [high_value] [low_value] \n"); |
| printf(" 2.11) %s crossover [port_num] [mode auto|mdi|mdix] - switch auto or force mdi/mdix mode for crossover cable\n", cmd); |
| printf(" \n"); |
| |
| /* 3. mac operations */ |
| printf("3) mt753x switch MAC operations====================================================================================================================>>>>\n"); |
| printf(" 3.1) %s dump - dump switch mac table\n", cmd); |
| printf(" 3.2) %s clear - clear switch mac table\n", cmd); |
| printf(" 3.3) %s add [mac] [portmap] - add an entry (with portmap) to switch mac table\n", cmd); |
| printf(" 3.4) %s add [mac] [portmap] [vlan id] - add an entry (with portmap, vlan id) to switch mac table\n", cmd); |
| printf(" 3.5) %s add [mac] [portmap] [vlan id] [age] - add an entry (with portmap, vlan id, age out time) to switch mac table\n", cmd); |
| printf(" 3.6) %s del mac [mac] vid [vid] - delete an entry from switch mac table\n", cmd); |
| printf(" 3.7) %s del mac [mac] fid [fid] - delete an entry from switch mac table\n", cmd); |
| printf(" 3.8) %s search mac [mac] vid [vid] - search an entry with specific mac and vid\n", cmd); |
| printf(" 3.9) %s search mac [mac] fid [fid] - search an entry with specific mac and fid\n", cmd); |
| printf(" 3.10) %s filt [mac] - add a SA filtering entry (with portmap 1111111) to switch mac table\n", cmd); |
| printf(" 3.11) %s filt [mac] [portmap] - add a SA filtering entry (with portmap)to switch mac table\n", cmd); |
| printf(" 3.12) %s filt [mac] [portmap] [vlan id - add a SA filtering entry (with portmap, vlan id)to switch mac table\n", cmd); |
| printf(" 3.13) %s filt [mac] [portmap] [vlan id] [age] - add a SA filtering entry (with portmap, vlan id, age out time) to switch table\n", cmd); |
| printf(" 3.14) %s arl aging [active:0|1] [time:1~65536] - set switch arl aging timeout value \n", cmd); |
| printf(" 3.15) %s macctl fc [enable|disable] - set switch mac global flow control,enable is 1, disable is 0 \n", cmd); |
| printf(" \n"); |
| |
| /* 4. mib counter operations */ |
| printf("4) mt753x switch mib counter operations============================================================================================================>>>>\n"); |
| printf(" 4.1) %s esw_cnt get -get switch mib counters \n", cmd); |
| printf(" 4.2) %s esw_cnt clear -clear switch mib counters \n", cmd); |
| printf(" 4.3) %s output_queue_cnt get -get switch output queue counters \n", cmd); |
| printf(" 4.4) %s free_page get -get switch system free page counters \n", cmd); |
| printf(" \n"); |
| |
| /* 5. acl function operations */ |
| printf("5) mt753x switch acl function operations============================================================================================================>>>>\n"); |
| printf(" 5.1) %s acl enable [port] [port_enable:0|1] - set switch acl function enabled, port is 0~6,enable is 1, disable is 0 \n", cmd); |
| printf(" 5.2) %s acl etype add [ethtype] [portmap] - drop L2 ethertype packets \n", cmd); |
| printf(" 5.3) %s acl dmac add [mac] [portmap] - drop L2 dest-Mac packets \n", cmd); |
| printf(" 5.4) %s acl dip add [dip] [portmap] - drop dip packets \n", cmd); |
| printf(" 5.5) %s acl port add [sport] [portmap] - drop L4 UDP/TCP source port packets\n", cmd); |
| printf(" 5.6) %s acl L4 add [2byes] [portmap] - drop L4 packets with 2bytes payload\n", cmd); |
| printf(" 5.7) %s acl acltbl-add [tbl_idx:0~63/255] [vawd1] [vawd2] - set switch acl table new entry, max index-7530:63,7531:255 \n", cmd); |
| printf(" 5.8) %s acl masktbl-add [tbl_idx:0~31/127] [vawd1] [vawd2] - set switch acl mask table new entry, max index-7530:31,7531:127 \n", cmd); |
| printf(" 5.9) %s acl ruletbl-add [tbl_idx:0~31/127] [vawd1] [vawd2] - set switch acl rule table new entry, max index-7530:31,7531:127 \n", cmd); |
| printf(" 5.10) %s acl ratetbl-add [tbl_idx:0~31] [vawd1] [vawd2] - set switch acl rate table new entry \n", cmd); |
| printf(" 5.11) %s acl dip meter [dip] [portmap][meter:kbps] - rate limit dip packets \n", cmd); |
| printf(" 5.12) %s acl dip trtcm [dip] [portmap][CIR:kbps][CBS][PIR][PBS]- TrTCM dip packets \n", cmd); |
| printf(" 5.13) %s acl dip modup [dip] [portmap][usr_pri] - modify usr priority from ACL \n", cmd); |
| printf(" 5.14) %s acl dip pppoe [dip] [portmap] - pppoe header removal \n", cmd); |
| printf(" \n"); |
| |
| /* 6. dip table operations */ |
| printf("6) mt753x switch dip table operations=================================================================================================================>>>>\n"); |
| printf(" 6.1) %s dip dump - dump switch dip table\n", cmd); |
| printf(" 6.2) %s dip clear - clear switch dip table\n", cmd); |
| printf(" 6.3) %s dip add [dip] [portmap] - add a dip entry to switch table\n", cmd); |
| printf(" 6.4) %s dip del [dip] - del a dip entry to switch table\n", cmd); |
| printf(" \n"); |
| |
| /* 7. sip table operations */ |
| printf("7) mt753x switch sip table operations=================================================================================================================>>>>\n"); |
| printf(" 7.1) %s sip dump - dump switch sip table\n", cmd); |
| printf(" 7.2) %s sip clear - clear switch sip table\n", cmd); |
| printf(" 7.3) %s sip add [sip] [dip] [portmap] - add a sip entry to switch table\n", cmd); |
| printf(" 7.4) %s sip del [sip] [dip] - del a sip entry to switch table\n", cmd); |
| printf(" \n"); |
| |
| /* 8. vlan table operations */ |
| printf("8) mt753x switch sip table operations====================================================================================================================>>>>\n"); |
| printf(" 8.1) %s vlan dump (egtag) - dump switch vlan table (with per port eg_tag setting)\n", cmd); |
| printf(" 8.2) %s vlan set [fid:0~7] [vid] [portmap] - set vlan id and associated member at switch vlan table\n", cmd); |
| printf(" ([stag:0~4095] [eg_con:0|1] [egtagPortMap 0:untagged 2:tagged]) \n"); |
| printf(" Full Example: %s vlan set 0 3 10000100 0 0 20000200\n", cmd); |
| printf(" 8.3) %s vlan vid [vlan idx] [active:0|1] [vid] [portMap] - set switch vlan vid elements \n", cmd); |
| printf(" [egtagPortMap] [ivl_en] [fid] [stag] \n"); |
| printf(" 8.4) %s vlan pvid [port] [pvid] - set switch vlan pvid \n", cmd); |
| printf(" 8.5) %s vlan acc-frm [port] [acceptable_frame_type:0~3] - set switch vlan acceptable_frame type : admit all frames: 0, \n", cmd); |
| printf(" admit only vlan-taged frames: 1,admit only untagged or priority-tagged frames: 2, reserved:3 \n"); |
| printf(" 8.6) %s vlan port-attr [port] [attr:0~3] - set switch vlan port attribute: user port: 0, statck port: 1, \n", cmd); |
| printf(" translation port: 2, transparent port:3 \n"); |
| printf(" 8.7) %s vlan port-mode [port] [mode:0~3] - set switch vlan port mode : port matrix mode: 0, fallback mode: 1, \n", cmd); |
| printf(" check mode: 2, security mode:3 \n"); |
| printf(" 8.8) %s vlan eg-tag-pvc [port] [eg_tag:0~7] - set switch vlan eg tag pvc : disable: 0, consistent: 1, reserved: 2, \n", cmd); |
| printf(" reserved:3,untagged:4,swap:5,tagged:6, stack:7 \n"); |
| printf(" 8.9) %s vlan eg-tag-pcr [port] [eg_tag:0~3] - set switch vlan eg tag pcr : untagged: 0, swap: 1, tagged: 2, stack:3 \n", cmd); |
| printf(" \n"); |
| |
| /* 9. rate limit operations */ |
| printf("9) mt753x switch rate limit operations=================================================================================================================>>>>\n"); |
| printf(" 9.1) %s ratectl [in_ex_gress:0|1] [port] [rate] - set switch port ingress(1) or egress(0) rate \n", cmd); |
| printf(" 9.2) %s ingress-rate on [port] [Kbps] - set ingress rate limit on port n (n= 0~ switch max port) \n", cmd); |
| printf(" 9.3) %s egress-rate on [port] [Kbps] - set egress rate limit on port n (n= 0~ switch max port) \n", cmd); |
| printf(" 9.4) %s ingress-rate off [port] - disable ingress rate limit on port n (n= 0~ switch max port) \n", cmd); |
| printf(" 9.5) %s egress-rate off [port] - disable egress rate limit on port n (n= 0~ switch max port)\n", cmd); |
| printf(" \n"); |
| |
| /* 10. igmp operations */ |
| printf("10) mt753x igmp operations===============================================================================================================================>>>>\n"); |
| printf(" 10.1) %s igmpsnoop on [leaky_en] [wan_num] - turn on IGMP snoop and router port learning\n", cmd); |
| printf(" leaky_en: 1 or 0. default 0; wan_num: 0 or 4. default 4\n"); |
| printf(" 10.2) %s igmpsnoop off - turn off IGMP snoop and router port learning\n", cmd); |
| printf(" 10.3) %s igmpsnoop enable [port#] - enable IGMP HW leave/join/Squery/Gquery\n", cmd); |
| printf(" 10.4) %s igmpsnoop disable [port#] - disable IGMP HW leave/join/Squery/Gquery\n", cmd); |
| printf(" \n"); |
| |
| /* 11. QoS operations */ |
| printf("11) mt753x QoS operations================================================================================================================================>>>>\n"); |
| printf(" 11.1) %s qos sch [port:0~6] [queue:0~7] [shaper:min|max] [type:rr:0|sp:1|wfq:2] - set switch qos sch type\n", cmd); |
| printf(" 11.2) %s qos base [port:0~6] [base] - set switch qos base(UPW); port-based:0, tag-based:1, \n", cmd); |
| printf(" dscp-based:2, acl-based:3, arl-based:4, stag-based:5 \n"); |
| printf(" 11.3) %s qos port-weight [port:0~6] [q0] [q1][q2][q3] - set switch qos port queue weight; \n", cmd); |
| printf(" [q4][q5][q6][q7] [qn]: the weight of queue n, range: 1~16 \n"); |
| printf(" 11.4) %s qos port-prio [port:0~6] [prio:0~7] - set switch port qos user priority; port is 0~6, priority is 0~7 \n", cmd); |
| printf(" 11.5) %s qos dscp-prio [dscp:0~63] [prio:0~7] - set switch qos dscp user priority; dscp is 0~63, priority is 0~7 \n", cmd); |
| printf(" 11.6) %s qos prio-qmap [port:0~6] [prio:0~7] [queue:0~7] - set switch qos priority queue map; priority is 0~7,queue is 0~7 \n", cmd); |
| printf(" \n"); |
| |
| /*12. port mirror operations*/ |
| printf(" 12) mt753x port mirror operations========================================================================================================================>>>>\n"); |
| printf(" 12.1) %s mirror monitor [port] - enable port mirror and indicate monitor port number\n", cmd); |
| printf(" 12.2) %s mirror target [port] - set port mirror target\n", cmd); |
| printf(" [direction| 0:off, 1:rx, 2:tx, 3:all] \n"); |
| printf(" 12.3) %s mirror enable [mirror_en:0|1] [mirror_port: 0-6] - set switch mirror function enable(1) or disabled(0) for port 0~6 \n", cmd); |
| printf(" 12.4) %s mirror port-based [port] [port_tx_mir:0|1] - set switch mirror port: target tx/rx/acl/vlan/igmp\n", cmd); |
| printf(" [port_rx_mir:0|1] [acl_mir:0|1] \n"); |
| printf(" [vlan_mis:0|1] [igmp_mir:0|1] \n"); |
| printf(" \n"); |
| |
| /*13. stp function*/ |
| printf(" 13) mt753x stp operations===============================================================================================================================>>>>\n"); |
| printf(" 13.1) %s stp [port] [fid] [state] - set switch spanning tree state, port is 0~6, fid is 0~7, \n", cmd); |
| printf(" state is 0~3(Disable/Discarding:0,Blocking/Listening/Discarding:1,) \n"); |
| printf(" Learning:2,Forwarding:3 \n"); |
| printf(" \n"); |
| |
| /*14. collision pool operations*/ |
| printf("14) mt753x collision pool operations========================================================================================================================>>>>\n"); |
| printf(" 14.1) %s collision-pool enable [enable 0|1] - enable or disable collision pool\n", cmd); |
| printf(" 14.2) %s collision-pool mac dump - dump collision pool mac table\n", cmd); |
| printf(" 14.3) %s collision-pool dip dump - dump collision pool dip table\n", cmd); |
| printf(" 14.4) %s collision-pool sip dump - dump collision pool sip table\n", cmd); |
| printf(" \n"); |
| |
| /*15. pfc(priority flow control) operations*/ |
| printf("15) mt753x pfc(priority flow control) operations==============================================================================================================>>>>\n"); |
| printf(" 15.1) %s pfc enable [port] [enable 0|1] - enable or disable port's pfc \n", cmd); |
| printf(" 15.2) %s pfc rx_counter [port] - get port n pfc 8 up rx counter \n", cmd); |
| printf(" 15.3) %s pfc tx_counter [port] - get port n pfc 8 up rx counter \n", cmd); |
| printf(" \n"); |
| |
| /*15. pfc(priority flow control) operations*/ |
| printf("16) mt753x EEE(802.3az) operations==============================================================================================================>>>>\n"); |
| printf(" 16.1) %s eee enable [enable 0|1] ([portMap]) - enable or disable EEE (by portMap)\n", cmd); |
| printf(" 16.2) %s eee dump ([port]) - dump EEE capability (by port)\n", cmd); |
| printf(" \n"); |
| |
| exit_free(); |
| exit(0); |
| } |
| |
| static void parse_reg_cmd(int argc, char *argv[], int len) |
| { |
| unsigned int val; |
| unsigned int off; |
| int i, j; |
| |
| if (!strncmp(argv[len - 3], "reg", 4)) { |
| if (argv[len - 2][0] == 'r') { |
| off = strtoul(argv[len - 1], NULL, 16); |
| reg_read(off, &val); |
| printf(" Read reg=%x, value=%x\n", off, val); |
| } else if (argv[len - 2][0] == 'w') { |
| off = strtoul(argv[len - 1], NULL, 16); |
| if (argc != len + 1) |
| usage(argv[0]); |
| val = strtoul(argv[len], NULL, 16); |
| reg_write(off, val); |
| printf(" Write reg=%x, value=%x\n", off, val); |
| } else if (argv[len - 2][0] == 'd') { |
| off = strtoul(argv[len - 1], NULL, 16); |
| for (i = 0; i < 16; i++) { |
| printf("0x%08x: ", off + 0x10 * i); |
| for (j = 0; j < 4; j++) { |
| reg_read(off + i * 0x10 + j * 0x4, &val); |
| printf(" 0x%08x", val); |
| } |
| printf("\n"); |
| } |
| } else |
| usage(argv[0]); |
| } else |
| usage(argv[0]); |
| } |
| |
| static int get_chip_name() |
| { |
| unsigned int temp; |
| FILE *fp = NULL; |
| char buff[255]; |
| |
| /*judge 7530*/ |
| reg_read((0x7ffc), &temp); |
| temp = temp >> 16; |
| if (temp == 0x7530) |
| return temp; |
| /*judge 7531*/ |
| reg_read(0x781c, &temp); |
| temp = temp >> 16; |
| if (temp == 0x7531) |
| return temp; |
| |
| /*judge jaguar embedded switch*/ |
| fp = fopen("/sys/bus/platform/devices/15020000.gsw/of_node/mediatek,model", "r"); |
| if (fp != NULL) { |
| fgets(buff, 255, (FILE *)fp); |
| fclose(fp); |
| if (!strcmp(buff, "mediatek,mt7988")) { |
| temp = 0x7988; |
| return temp; |
| } |
| } |
| |
| return -1; |
| } |
| |
| static int phy_operate(int argc, char *argv[]) |
| { |
| unsigned int port_num; |
| unsigned int dev_num; |
| unsigned int value; |
| unsigned int reg; |
| int ret = 0; |
| char op; |
| |
| if (strncmp(argv[2], "cl22", 4) && strncmp(argv[2], "cl45", 4)) |
| usage(argv[0]); |
| |
| op = argv[3][0]; |
| |
| switch(op) { |
| case 'r': |
| reg = strtoul(argv[argc-1], NULL, 0); |
| if (argc == 6) { |
| port_num = strtoul(argv[argc-2], NULL, 0); |
| ret = mii_mgr_read(port_num, reg, &value); |
| if (ret < 0) |
| printf(" Phy read reg fail\n"); |
| else |
| printf(" Phy read reg=0x%x, value=0x%x\n", reg, value); |
| } else if (argc == 7) { |
| dev_num = strtoul(argv[argc-2], NULL, 0); |
| port_num = strtoul(argv[argc-3], NULL, 0); |
| ret = mii_mgr_c45_read(port_num, dev_num, reg, &value); |
| if (ret < 0) |
| printf(" Phy read reg fail\n"); |
| else |
| printf(" Phy read reg=0x%x, value=0x%x\n", reg, value); |
| } else |
| ret = phy_dump(32); |
| break; |
| case 'w': |
| reg = strtoul(argv[argc-2], NULL, 0); |
| value = strtoul(argv[argc-1], NULL, 0); |
| if (argc == 7) { |
| port_num = strtoul(argv[argc-3], NULL, 0); |
| ret = mii_mgr_write(port_num, reg, value); |
| } |
| else if (argc == 8) { |
| dev_num = strtoul(argv[argc-3], NULL, 0); |
| port_num = strtoul(argv[argc-4], NULL, 0); |
| ret = mii_mgr_c45_write(port_num, dev_num, reg, value); |
| } |
| else |
| usage(argv[0]); |
| break; |
| default: |
| break; |
| } |
| |
| return ret; |
| } |
| |
| |
| int main(int argc, char *argv[]) |
| { |
| int err; |
| |
| attres = (struct mt753x_attr *)malloc(sizeof(struct mt753x_attr)); |
| attres->dev_id = -1; |
| attres->port_num = -1; |
| attres->phy_dev = -1; |
| nl_init_flag = true; |
| |
| /* dsa netlink family might not be enabled. Try gsw netlink family. */ |
| err = mt753x_netlink_init(MT753X_DSA_GENL_NAME); |
| if (!err) |
| chip_name = get_chip_name(); |
| |
| if (err < 0) { |
| err = mt753x_netlink_init(MT753X_GENL_NAME); |
| if (!err) |
| chip_name = get_chip_name(); |
| } |
| |
| if (err < 0) { |
| err = switch_ioctl_init(); |
| if (!err) { |
| nl_init_flag = false; |
| chip_name = get_chip_name(); |
| if (chip_name < 0) { |
| printf("no chip unsupport or chip id is invalid!\n"); |
| exit_free(); |
| exit(0); |
| } |
| } |
| } |
| |
| if (argc < 2) |
| usage(argv[0]); |
| |
| if (!strcmp(argv[1], "dev")) { |
| attres->dev_id = strtoul(argv[2], NULL, 0); |
| argv += 2; |
| argc -= 2; |
| if (argc < 2) |
| usage(argv[0]); |
| |
| } |
| |
| if (argc == 2) { |
| if (!strcmp(argv[1], "devs")) { |
| attres->type = MT753X_ATTR_TYPE_MESG; |
| mt753x_list_swdev(attres, MT753X_CMD_REQUEST); |
| } else if (!strncmp(argv[1], "dump", 5)) { |
| table_dump(); |
| } else if (!strncmp(argv[1], "clear", 6)) { |
| table_clear(); |
| printf("done.\n"); |
| } else if (!strncmp(argv[1], "reset", 5)) { |
| switch_reset(argc, argv); |
| } else if (!strncmp(argv[1], "phy", 4)) { |
| phy_dump(32); //dump all phy register |
| } else if (!strncmp(argv[1], "sysctl", 7)) { |
| if (nl_init_flag) |
| printf("netlink(%s)\n",MT753X_GENL_NAME); |
| else |
| printf("ioctl(%s)\n",ETH_DEVNAME); |
| } else |
| usage(argv[0]); |
| } else if (!strncmp(argv[1], "arl", 4)) { |
| if (!strncmp(argv[2], "aging", 6)) |
| doArlAging(argc, argv); |
| } else if (!strncmp(argv[1], "esw_cnt", 8)) { |
| if (!strncmp(argv[2], "get", 4)) |
| read_mib_counters(); |
| else if (!strncmp(argv[2], "clear", 6)) |
| clear_mib_counters(); |
| else |
| usage(argv[0]); |
| }else if (!strncmp(argv[1], "output_queue_cnt", 17)) { |
| if (!strncmp(argv[2], "get", 4)) |
| read_output_queue_counters(); |
| else |
| usage(argv[0]); |
| }else if (!strncmp(argv[1], "free_page", 10)) { |
| if (!strncmp(argv[2], "get", 4)) |
| read_free_page_counters(); |
| else |
| usage(argv[0]); |
| } |
| else if (!strncmp(argv[1], "ratectl", 8)) |
| rate_control(argc, argv); |
| else if (!strncmp(argv[1], "add", 4)) |
| table_add(argc, argv); |
| else if (!strncmp(argv[1], "filt", 5)) |
| table_add(argc, argv); |
| else if (!strncmp(argv[1], "del", 4)) { |
| if (!strncmp(argv[4], "fid", 4)) |
| table_del_fid(argc, argv); |
| else if (!strncmp(argv[4], "vid", 4)) |
| table_del_vid(argc, argv); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[1], "search", 7)) { |
| if (!strncmp(argv[4], "fid", 4)) |
| table_search_mac_fid(argc, argv); |
| else if (!strncmp(argv[4], "vid", 4)) |
| table_search_mac_vid(argc, argv); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[1], "phy", 4)) { |
| if (argc == 3) { |
| int phy_addr = strtoul(argv[2], NULL, 0); |
| if (phy_addr < 0 || phy_addr > 31) |
| usage(argv[0]); |
| phy_dump(phy_addr); |
| } else if (argc == 5) { |
| if (!strncmp(argv[2], "fc", 2)) |
| phy_set_fc(argc, argv); |
| else if (!strncmp(argv[2], "an", 2)) |
| phy_set_an(argc, argv); |
| else |
| phy_dump(32); |
| } else |
| phy_operate(argc, argv); |
| } else if (!strncmp(argv[1], "trreg", 4)) { |
| if (rw_phy_token_ring(argc, argv) < 0) |
| usage(argv[0]); |
| } else if (!strncmp(argv[1], "macctl", 7)) { |
| if (argc < 3) |
| usage(argv[0]); |
| if (!strncmp(argv[2], "fc", 3)) |
| global_set_mac_fc(argc, argv); |
| else if (!strncmp(argv[2], "pfc", 4)) |
| set_mac_pfc(argc, argv); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[1], "qos", 4)) { |
| if (argc < 3) |
| usage(argv[0]); |
| if (!strncmp(argv[2], "sch", 4)) |
| qos_sch_select(argc, argv); |
| else if (!strncmp(argv[2], "base", 5)) |
| qos_set_base(argc, argv); |
| else if (!strncmp(argv[2], "port-weight", 12)) |
| qos_wfq_set_weight(argc, argv); |
| else if (!strncmp(argv[2], "port-prio", 10)) |
| qos_set_portpri(argc, argv); |
| else if (!strncmp(argv[2], "dscp-prio", 10)) |
| qos_set_dscppri(argc, argv); |
| else if (!strncmp(argv[2], "prio-qmap", 10)) |
| qos_pri_mapping_queue(argc, argv); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[1], "stp", 3)) { |
| if (argc < 3) |
| usage(argv[0]); |
| else |
| doStp(argc, argv); |
| } else if (!strncmp(argv[1], "sip", 5)) { |
| if (argc < 3) |
| usage(argv[0]); |
| if (!strncmp(argv[2], "dump", 5)) |
| sip_dump(); |
| else if (!strncmp(argv[2], "add", 4)) |
| sip_add(argc, argv); |
| else if (!strncmp(argv[2], "del", 4)) |
| sip_del(argc, argv); |
| else if (!strncmp(argv[2], "clear", 6)) |
| sip_clear(); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[1], "dip", 4)) { |
| if (argc < 3) |
| usage(argv[0]); |
| if (!strncmp(argv[2], "dump", 5)) |
| dip_dump(); |
| else if (!strncmp(argv[2], "add", 4)) |
| dip_add(argc, argv); |
| else if (!strncmp(argv[2], "del", 4)) |
| dip_del(argc, argv); |
| else if (!strncmp(argv[2], "clear", 6)) |
| dip_clear(); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[1], "mirror", 7)) { |
| if (argc < 3) |
| usage(argv[0]); |
| if (!strncmp(argv[2], "monitor", 8)) |
| set_mirror_to(argc, argv); |
| else if (!strncmp(argv[2], "target", 7)) |
| set_mirror_from(argc, argv); |
| else if (!strncmp(argv[2], "enable", 7)) |
| doMirrorEn(argc, argv); |
| else if (!strncmp(argv[2], "port-based", 11)) |
| doMirrorPortBased(argc, argv); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[1], "acl", 4)) { |
| if (argc < 3) |
| usage(argv[0]); |
| if (!strncmp(argv[2], "dip", 4)) { |
| if (!strncmp(argv[3], "add", 4)) |
| acl_dip_add(argc, argv); |
| else if (!strncmp(argv[3], "modup", 6)) |
| acl_dip_modify(argc, argv); |
| else if (!strncmp(argv[3], "pppoe", 6)) |
| acl_dip_pppoe(argc, argv); |
| else if (!strncmp(argv[3], "trtcm", 4)) |
| acl_dip_trtcm(argc, argv); |
| else if (!strncmp(argv[3], "meter", 6)) |
| acl_dip_meter(argc, argv); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[2], "dmac", 6)) { |
| if (!strncmp(argv[3], "add", 4)) |
| acl_mac_add(argc, argv); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[2], "etype", 6)) { |
| if (!strncmp(argv[3], "add", 4)) |
| acl_ethertype(argc, argv); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[2], "port", 5)) { |
| if (!strncmp(argv[3], "add", 4)) |
| acl_sp_add(argc, argv); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[2], "L4", 5)) { |
| if (!strncmp(argv[3], "add", 4)) |
| acl_l4_add(argc, argv); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[2], "enable", 7)) |
| acl_port_enable(argc, argv); |
| else if (!strncmp(argv[2], "acltbl-add", 11)) |
| acl_table_add(argc, argv); |
| else if (!strncmp(argv[2], "masktbl-add", 12)) |
| acl_mask_table_add(argc, argv); |
| else if (!strncmp(argv[2], "ruletbl-add", 12)) |
| acl_rule_table_add(argc, argv); |
| else if (!strncmp(argv[2], "ratetbl-add", 12)) |
| acl_rate_table_add(argc, argv); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[1], "vlan", 5)) { |
| if (argc < 3) |
| usage(argv[0]); |
| if (!strncmp(argv[2], "dump", 5)) |
| vlan_dump(argc, argv); |
| else if (!strncmp(argv[2], "set", 4)) |
| vlan_set(argc, argv); |
| else if (!strncmp(argv[2], "clear", 6)) |
| vlan_clear(argc, argv); |
| else if (!strncmp(argv[2], "vid", 4)) |
| doVlanSetVid(argc, argv); |
| else if (!strncmp(argv[2], "pvid", 5)) |
| doVlanSetPvid(argc, argv); |
| else if (!strncmp(argv[2], "acc-frm", 8)) |
| doVlanSetAccFrm(argc, argv); |
| else if (!strncmp(argv[2], "port-attr", 10)) |
| doVlanSetPortAttr(argc, argv); |
| else if (!strncmp(argv[2], "port-mode", 10)) |
| doVlanSetPortMode(argc, argv); |
| else if (!strncmp(argv[2], "eg-tag-pcr", 11)) |
| doVlanSetEgressTagPCR(argc, argv); |
| else if (!strncmp(argv[2], "eg-tag-pvc", 11)) |
| doVlanSetEgressTagPVC(argc, argv); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[1], "reg", 4)) { |
| parse_reg_cmd(argc, argv, 4); |
| } else if (!strncmp(argv[1], "ingress-rate", 6)) { |
| int port = 0, bw = 0; |
| if (argv[2][1] == 'n') { |
| port = strtoul(argv[3], NULL, 0); |
| bw = strtoul(argv[4], NULL, 0); |
| if (ingress_rate_set(1, port, bw) == 0) |
| printf("switch port=%d, bw=%d\n", port, bw); |
| } |
| else if (argv[2][1] == 'f') { |
| if (argc != 4) |
| usage(argv[0]); |
| port = strtoul(argv[3], NULL, 0); |
| if (ingress_rate_set(0, port, bw) == 0) |
| printf("switch port=%d ingress rate limit off\n", port); |
| } else |
| usage(argv[0]); |
| } else if (!strncmp(argv[1], "egress-rate", 6)) { |
| int port = 0, bw = 0; |
| if (argv[2][1] == 'n') { |
| port = strtoul(argv[3], NULL, 0); |
| bw = strtoul(argv[4], NULL, 0); |
| if (egress_rate_set(1, port, bw) == 0) |
| printf("switch port=%d, bw=%d\n", port, bw); |
| } else if (argv[2][1] == 'f') { |
| if (argc != 4) |
| usage(argv[0]); |
| port = strtoul(argv[3], NULL, 0); |
| if (egress_rate_set(0, port, bw) == 0) |
| printf("switch port=%d egress rate limit off\n", port); |
| } else |
| usage(argv[0]); |
| } else if (!strncmp(argv[1], "igmpsnoop", 10)) { |
| if (argc < 3) |
| usage(argv[0]); |
| if (!strncmp(argv[2], "on", 3)) |
| igmp_on(argc, argv); |
| else if (!strncmp(argv[2], "off", 4)) |
| igmp_off(); |
| else if (!strncmp(argv[2], "enable", 7)) |
| igmp_enable(argc, argv); |
| else if (!strncmp(argv[2], "disable", 8)) |
| igmp_disable(argc, argv); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[1], "collision-pool", 15)) { |
| if (argc < 3) |
| usage(argv[0]); |
| if (!strncmp(argv[2], "enable", 7)) |
| collision_pool_enable(argc, argv); |
| else if (!strncmp(argv[2], "mac", 4)){ |
| if (!strncmp(argv[3], "dump", 5)) |
| collision_pool_mac_dump(); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[2], "dip", 4)){ |
| if (!strncmp(argv[3], "dump", 5)) |
| collision_pool_dip_dump(); |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[2], "sip", 4)){ |
| if (!strncmp(argv[3], "dump", 5)) |
| collision_pool_sip_dump(); |
| else |
| usage(argv[0]); |
| } |
| else |
| usage(argv[0]); |
| } else if (!strncmp(argv[1], "pfc", 15)) { |
| if (argc < 4 || argc > 5) |
| usage(argv[0]); |
| if (!strncmp(argv[2], "enable", 7)) |
| set_mac_pfc(argc, argv); |
| else if (!strncmp(argv[2], "rx_counter", 11)){ |
| pfc_get_rx_counter(argc, argv); |
| } else if (!strncmp(argv[2], "tx_counter", 11)){ |
| pfc_get_tx_counter(argc, argv); |
| } else |
| usage(argv[0]); |
| } else if (!strncmp(argv[1], "crossover", 10)) { |
| if (argc < 4) |
| usage(argv[0]); |
| else |
| phy_crossover(argc, argv); |
| } else if (!strncmp(argv[1], "eee", 4)) { |
| if (argc < 3) |
| usage(argv[0]); |
| if (!strncmp(argv[2], "enable", 7) || |
| !strncmp(argv[2], "disable", 8)) |
| eee_enable(argc, argv); |
| else if (!strncmp(argv[2], "dump", 5)) |
| eee_dump(argc, argv); |
| else |
| usage(argv[0]); |
| } else |
| usage(argv[0]); |
| |
| exit_free(); |
| return 0; |
| } |