| #define _GNU_SOURCE |
| #include <fcntl.h> |
| #include <sys/mman.h> |
| #include <sys/stat.h> |
| #include <sys/wait.h> |
| |
| #include "atenl.h" |
| |
| #define EEPROM_PART_SIZE 0xFF000 |
| char *eeprom_file; |
| |
| static int |
| atenl_create_file(struct atenl *an, bool flash_mode) |
| { |
| char fname[64], buf[1024]; |
| ssize_t w, len, max_len, total_len = 0; |
| int fd_ori, fd, ret; |
| |
| /* reserve space for pre-cal data in flash mode */ |
| if (flash_mode) { |
| atenl_dbg("%s: init eeprom with flash / binfile mode\n", __func__); |
| max_len = EEPROM_PART_SIZE; |
| } else { |
| atenl_dbg("%s: init eeprom with efuse / default bin mode\n", __func__); |
| max_len = 0x1e00; |
| } |
| |
| snprintf(fname, sizeof(fname), |
| "/sys/kernel/debug/ieee80211/phy%d/mt76/eeprom", |
| get_band_val(an, 0, phy_idx)); |
| fd_ori = open(fname, O_RDONLY); |
| if (fd_ori < 0) |
| return -1; |
| |
| fd = open(eeprom_file, O_RDWR | O_CREAT | O_EXCL, 00644); |
| if (fd < 0) |
| goto out; |
| |
| while ((len = read(fd_ori, buf, sizeof(buf))) > 0) { |
| retry: |
| w = write(fd, buf, len); |
| if (w > 0) { |
| total_len += len; |
| continue; |
| } |
| |
| if (errno == EINTR) |
| goto retry; |
| |
| perror("write"); |
| unlink(eeprom_file); |
| close(fd); |
| fd = -1; |
| goto out; |
| } |
| |
| /* reserve space for pre-cal data in flash mode */ |
| len = sizeof(buf); |
| memset(buf, 0, len); |
| while (total_len < max_len) { |
| w = write(fd, buf, len); |
| |
| if (w > 0) { |
| total_len += len; |
| continue; |
| } |
| |
| if (errno != EINTR) { |
| perror("write"); |
| unlink(eeprom_file); |
| close(fd); |
| fd = -1; |
| goto out; |
| } |
| } |
| |
| |
| ret = lseek(fd, 0, SEEK_SET); |
| if (ret) { |
| close(fd_ori); |
| close(fd); |
| return ret; |
| } |
| |
| out: |
| close(fd_ori); |
| return fd; |
| } |
| |
| static bool |
| atenl_eeprom_file_exists(void) |
| { |
| struct stat st; |
| |
| return stat(eeprom_file, &st) == 0; |
| } |
| |
| static int |
| atenl_eeprom_init_file(struct atenl *an, bool flash_mode) |
| { |
| int fd; |
| |
| if (!atenl_eeprom_file_exists()) |
| return atenl_create_file(an, flash_mode); |
| |
| fd = open(eeprom_file, O_RDWR); |
| if (fd < 0) |
| perror("open"); |
| |
| return fd; |
| } |
| |
| static void |
| atenl_eeprom_init_chip_id(struct atenl *an) |
| { |
| an->chip_id = *(u16 *)an->eeprom_data; |
| |
| if (is_mt7915(an)) { |
| an->adie_id = 0x7975; |
| } else if (is_mt7916(an) || is_mt7981(an)) { |
| an->adie_id = 0x7976; |
| } else if (is_mt7986(an)) { |
| bool is_7975 = false; |
| u32 val; |
| u8 sub_id; |
| |
| atenl_reg_read(an, 0x18050000, &val); |
| |
| switch (val & 0xf) { |
| case MT7975_ONE_ADIE_SINGLE_BAND: |
| is_7975 = true; |
| /* fallthrough */ |
| case MT7976_ONE_ADIE_SINGLE_BAND: |
| sub_id = 0xa; |
| break; |
| case MT7976_ONE_ADIE_DBDC: |
| sub_id = 0x7; |
| break; |
| case MT7975_DUAL_ADIE_DBDC: |
| is_7975 = true; |
| /* fallthrough */ |
| case MT7976_DUAL_ADIE_DBDC: |
| default: |
| sub_id = 0xf; |
| break; |
| } |
| |
| an->sub_chip_id = sub_id; |
| an->adie_id = is_7975 ? 0x7975 : 0x7976; |
| } else if (is_mt7996(an)) { |
| /* TODO: parse info if required */ |
| } else if (is_mt7992(an)) { |
| /* TODO: parse info if required */ |
| } |
| } |
| |
| static void |
| atenl_eeprom_init_max_size(struct atenl *an) |
| { |
| switch (an->chip_id) { |
| case 0x7915: |
| an->eeprom_size = 3584; |
| an->eeprom_prek_offs = 0x62; |
| break; |
| case 0x7906: |
| case 0x7916: |
| case 0x7981: |
| case 0x7986: |
| an->eeprom_size = 4096; |
| an->eeprom_prek_offs = 0x19a; |
| break; |
| case 0x7990: |
| case 0x7992: |
| an->eeprom_size = 7680; |
| an->eeprom_prek_offs = 0x1a5; |
| default: |
| break; |
| } |
| } |
| |
| static void |
| atenl_eeprom_init_band_cap(struct atenl *an) |
| { |
| #define EAGLE_BAND_SEL(index) MT_EE_WIFI_EAGLE_CONF##index##_BAND_SEL |
| u8 *eeprom = an->eeprom_data; |
| |
| if (is_mt7915(an)) { |
| u8 val = eeprom[MT_EE_WIFI_CONF]; |
| u8 band_sel = FIELD_GET(MT_EE_WIFI_CONF0_BAND_SEL, val); |
| struct atenl_band *anb = &an->anb[0]; |
| |
| /* MT7915A */ |
| if (band_sel == MT_EE_BAND_SEL_DEFAULT) { |
| anb->valid = true; |
| anb->cap = BAND_TYPE_2G_5G; |
| return; |
| } |
| |
| /* MT7915D */ |
| if (band_sel == MT_EE_BAND_SEL_2GHZ) { |
| anb->valid = true; |
| anb->cap = BAND_TYPE_2G; |
| } |
| |
| val = eeprom[MT_EE_WIFI_CONF + 1]; |
| band_sel = FIELD_GET(MT_EE_WIFI_CONF0_BAND_SEL, val); |
| anb++; |
| |
| if (band_sel == MT_EE_BAND_SEL_5GHZ) { |
| anb->valid = true; |
| anb->cap = BAND_TYPE_5G; |
| } |
| } else if (is_mt7916(an) || is_mt7981(an) || is_mt7986(an)) { |
| struct atenl_band *anb; |
| u8 val, band_sel; |
| int i; |
| |
| for (i = 0; i < 2; i++) { |
| val = eeprom[MT_EE_WIFI_CONF + i]; |
| band_sel = FIELD_GET(MT_EE_WIFI_CONF0_BAND_SEL, val); |
| anb = &an->anb[i]; |
| |
| anb->valid = true; |
| switch (band_sel) { |
| case MT_EE_BAND_SEL_2G: |
| anb->cap = BAND_TYPE_2G; |
| break; |
| case MT_EE_BAND_SEL_5G: |
| anb->cap = BAND_TYPE_5G; |
| break; |
| case MT_EE_BAND_SEL_6G: |
| anb->cap = BAND_TYPE_6G; |
| break; |
| case MT_EE_BAND_SEL_5G_6G: |
| anb->cap = BAND_TYPE_5G_6G; |
| break; |
| default: |
| break; |
| } |
| } |
| } else if (is_mt7996(an)) { |
| struct atenl_band *anb; |
| u8 val, band_sel; |
| u8 band_sel_mask[3] = {EAGLE_BAND_SEL(0), EAGLE_BAND_SEL(1), |
| EAGLE_BAND_SEL(2)}; |
| int i; |
| |
| for (i = 0; i < 3; i++) { |
| val = eeprom[MT_EE_WIFI_CONF + i]; |
| band_sel = FIELD_GET(band_sel_mask[i], val); |
| anb = &an->anb[i]; |
| |
| anb->valid = true; |
| switch (band_sel) { |
| case MT_EE_EAGLE_BAND_SEL_2GHZ: |
| anb->cap = BAND_TYPE_2G; |
| break; |
| case MT_EE_EAGLE_BAND_SEL_5GHZ: |
| anb->cap = BAND_TYPE_5G; |
| break; |
| case MT_EE_EAGLE_BAND_SEL_6GHZ: |
| anb->cap = BAND_TYPE_6G; |
| break; |
| case MT_EE_EAGLE_BAND_SEL_5GHZ_6GHZ: |
| anb->cap = BAND_TYPE_5G_6G; |
| break; |
| default: |
| break; |
| } |
| } |
| } else if (is_mt7992(an)) { |
| struct atenl_band *anb; |
| u8 val, band_sel; |
| u8 band_sel_mask[2] = {EAGLE_BAND_SEL(0), EAGLE_BAND_SEL(1)}; |
| int i; |
| |
| for (i = 0; i < 2; i++) { |
| val = eeprom[MT_EE_WIFI_CONF + i]; |
| band_sel = FIELD_GET(band_sel_mask[i], val); |
| anb = &an->anb[i]; |
| |
| anb->valid = true; |
| switch (band_sel) { |
| case MT_EE_EAGLE_BAND_SEL_2GHZ: |
| anb->cap = BAND_TYPE_2G; |
| break; |
| case MT_EE_EAGLE_BAND_SEL_5GHZ: |
| anb->cap = BAND_TYPE_5G; |
| break; |
| case MT_EE_EAGLE_BAND_SEL_6GHZ: |
| anb->cap = BAND_TYPE_6G; |
| break; |
| case MT_EE_EAGLE_BAND_SEL_5GHZ_6GHZ: |
| anb->cap = BAND_TYPE_5G_6G; |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| } |
| |
| static void |
| atenl_eeprom_init_antenna_cap(struct atenl *an) |
| { |
| switch (an->chip_id) { |
| case 0x7915: |
| if (an->anb[0].cap == BAND_TYPE_2G_5G) |
| an->anb[0].chainmask = 0xf; |
| else { |
| an->anb[0].chainmask = 0x3; |
| an->anb[1].chainmask = 0xc; |
| } |
| break; |
| case 0x7906: |
| case 0x7916: |
| an->anb[0].chainmask = 0x3; |
| an->anb[1].chainmask = 0x3; |
| break; |
| case 0x7981: |
| an->anb[0].chainmask = 0x3; |
| an->anb[1].chainmask = 0x7; |
| break; |
| case 0x7986: |
| an->anb[0].chainmask = 0xf; |
| an->anb[1].chainmask = 0xf; |
| break; |
| case 0x7990: |
| an->anb[0].chainmask = 0xf; |
| an->anb[1].chainmask = 0xf; |
| an->anb[2].chainmask = 0xf; |
| break; |
| case 0x7992: |
| an->anb[0].chainmask = 0xf; |
| an->anb[1].chainmask = 0xf; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| int atenl_eeprom_init(struct atenl *an, u8 phy_idx) |
| { |
| bool flash_mode; |
| int eeprom_fd; |
| char buf[30]; |
| u8 main_phy_idx = phy_idx; |
| |
| set_band_val(an, 0, phy_idx, phy_idx); |
| atenl_nl_check_mtd(an); |
| flash_mode = an->mtd_part != NULL; |
| |
| // Get the first main phy index for this chip |
| if (flash_mode) |
| main_phy_idx -= an->band_idx; |
| |
| snprintf(buf, sizeof(buf), "/tmp/atenl-eeprom-phy%u", main_phy_idx); |
| eeprom_file = strdup(buf); |
| |
| eeprom_fd = atenl_eeprom_init_file(an, flash_mode); |
| if (eeprom_fd < 0) |
| return -1; |
| |
| an->eeprom_data = mmap(NULL, EEPROM_PART_SIZE, PROT_READ | PROT_WRITE, |
| MAP_SHARED, eeprom_fd, 0); |
| if (!an->eeprom_data) { |
| perror("mmap"); |
| close(eeprom_fd); |
| return -1; |
| } |
| |
| an->eeprom_fd = eeprom_fd; |
| atenl_eeprom_init_chip_id(an); |
| atenl_eeprom_init_max_size(an); |
| atenl_eeprom_init_band_cap(an); |
| atenl_eeprom_init_antenna_cap(an); |
| |
| if (get_band_val(an, 1, valid)) |
| set_band_val(an, 1, phy_idx, phy_idx + 1); |
| |
| if (get_band_val(an, 2, valid)) |
| set_band_val(an, 2, phy_idx, phy_idx + 2); |
| |
| return 0; |
| } |
| |
| void atenl_eeprom_close(struct atenl *an) |
| { |
| msync(an->eeprom_data, EEPROM_PART_SIZE, MS_SYNC); |
| munmap(an->eeprom_data, EEPROM_PART_SIZE); |
| close(an->eeprom_fd); |
| |
| if (!an->cmd_mode) { |
| if (remove(eeprom_file)) |
| perror("remove"); |
| } |
| |
| free(eeprom_file); |
| } |
| |
| int atenl_eeprom_update_precal(struct atenl *an, int write_offs, int size) |
| { |
| u32 offs = an->eeprom_prek_offs; |
| u8 cal_indicator, *eeprom, *pre_cal; |
| |
| if (!an->cal && !an->cal_info) |
| return 0; |
| |
| eeprom = an->eeprom_data; |
| pre_cal = eeprom + an->eeprom_size; |
| cal_indicator = an->cal_info[4]; |
| |
| memcpy(eeprom + offs, &cal_indicator, sizeof(u8)); |
| memcpy(pre_cal, an->cal_info, PRE_CAL_INFO); |
| pre_cal += (PRE_CAL_INFO + write_offs); |
| |
| if (an->cal) |
| memcpy(pre_cal, an->cal, size); |
| else |
| memset(pre_cal, 0, size); |
| |
| return 0; |
| } |
| |
| int atenl_eeprom_write_mtd(struct atenl *an) |
| { |
| #define TMP_FILE "/tmp/tmp_eeprom.bin" |
| pid_t pid; |
| u32 size = an->eeprom_size; |
| u32 *precal_info = an->eeprom_data + an->eeprom_size; |
| u32 precal_size = precal_info[0] + precal_info[1]; |
| char cmd[100]; |
| |
| if (an->mtd_part == NULL || !(~an->mtd_offset)) |
| return 0; |
| |
| if (precal_size) |
| size += PRE_CAL_INFO + precal_size; |
| |
| sprintf(cmd, "dd if=%s of=%s bs=1 count=%d", eeprom_file, TMP_FILE, size); |
| system(cmd); |
| |
| sprintf(cmd, "mtd -p %d write %s %s", an->mtd_offset, TMP_FILE, an->mtd_part); |
| system(cmd); |
| |
| sprintf(cmd, "rm %s", TMP_FILE); |
| system(cmd); |
| |
| return 0; |
| } |
| |
| /* Directly read values from driver's eeprom. |
| * It's usally used to get calibrated data from driver. |
| */ |
| int atenl_eeprom_read_from_driver(struct atenl *an, u32 offset, int len) |
| { |
| u8 *eeprom_data = an->eeprom_data + offset; |
| char fname[64], buf[1024]; |
| int fd_ori, ret; |
| ssize_t rd; |
| |
| snprintf(fname, sizeof(fname), |
| "/sys/kernel/debug/ieee80211/phy%d/mt76/eeprom", |
| get_band_val(an, 0, phy_idx)); |
| fd_ori = open(fname, O_RDONLY); |
| if (fd_ori < 0) |
| return -1; |
| |
| ret = lseek(fd_ori, offset, SEEK_SET); |
| if (ret < 0) |
| goto out; |
| |
| while ((rd = read(fd_ori, buf, sizeof(buf))) > 0 && len) { |
| if (len < rd) { |
| memcpy(eeprom_data, buf, len); |
| break; |
| } else { |
| memcpy(eeprom_data, buf, rd); |
| eeprom_data += rd; |
| len -= rd; |
| } |
| } |
| |
| ret = 0; |
| out: |
| close(fd_ori); |
| return ret; |
| } |
| |
| /* Update all eeprom values to driver before writing efuse */ |
| static void |
| atenl_eeprom_sync_to_driver(struct atenl *an) |
| { |
| int i; |
| |
| for (i = 0; i < an->eeprom_size; i += 16) |
| atenl_nl_write_eeprom(an, i, &an->eeprom_data[i], 16); |
| } |
| |
| void atenl_eeprom_cmd_handler(struct atenl *an, u8 phy_idx, char *cmd) |
| { |
| an->cmd_mode = true; |
| |
| atenl_eeprom_init(an, phy_idx); |
| |
| if (!strncmp(cmd, "sync eeprom all", 15)) { |
| atenl_eeprom_write_mtd(an); |
| } else if (!strncmp(cmd, "eeprom", 6)) { |
| char *s = strchr(cmd, ' '); |
| |
| if (!s) { |
| atenl_err("eeprom: please type a correct command\n"); |
| return; |
| } |
| |
| s++; |
| if (!strncmp(s, "reset", 5)) { |
| unlink(eeprom_file); |
| } else if (!strncmp(s, "file", 4)) { |
| atenl_info("%s\n", eeprom_file); |
| if (an->mtd_part != NULL) |
| atenl_info("%s mode\n", |
| ~an->mtd_offset == 0 ? "Binfile" : "Flash"); |
| else |
| atenl_info("Efuse / Default bin mode\n"); |
| } else if (!strncmp(s, "set", 3)) { |
| u32 offset, val; |
| |
| s = strchr(s, ' '); |
| if (!s) |
| return; |
| s++; |
| |
| if (!sscanf(s, "%x=%x", &offset, &val) || |
| offset > EEPROM_PART_SIZE) |
| return; |
| |
| an->eeprom_data[offset] = val; |
| atenl_info("set offset 0x%x to 0x%x\n", offset, val); |
| } else if (!strncmp(s, "update buffermode", 17)) { |
| atenl_eeprom_sync_to_driver(an); |
| atenl_nl_update_buffer_mode(an); |
| } else if (!strncmp(s, "write", 5)) { |
| s = strchr(s, ' '); |
| if (!s) |
| return; |
| s++; |
| |
| if (!strncmp(s, "flash", 5)) { |
| atenl_eeprom_write_mtd(an); |
| } else if (!strncmp(s, "to efuse", 8)) { |
| atenl_eeprom_sync_to_driver(an); |
| atenl_nl_write_efuse_all(an); |
| } |
| } else if (!strncmp(s, "read", 4)) { |
| u32 offset; |
| |
| s = strchr(s, ' '); |
| if (!s) |
| return; |
| s++; |
| |
| if (!sscanf(s, "%x", &offset) || |
| offset > EEPROM_PART_SIZE) |
| return; |
| |
| atenl_info("val = 0x%x (%u)\n", an->eeprom_data[offset], |
| an->eeprom_data[offset]); |
| } else if (!strncmp(s, "precal", 6)) { |
| s = strchr(s, ' '); |
| if (!s) |
| return; |
| s++; |
| |
| if (!strncmp(s, "sync group", 10)) { |
| atenl_nl_precal_sync_from_driver(an, PREK_SYNC_GROUP); |
| } else if (!strncmp(s, "sync dpd 2g", 11)) { |
| atenl_nl_precal_sync_from_driver(an, PREK_SYNC_DPD_2G); |
| } else if (!strncmp(s, "sync dpd 5g", 11)) { |
| atenl_nl_precal_sync_from_driver(an, PREK_SYNC_DPD_5G); |
| } else if (!strncmp(s, "sync dpd 6g", 11)) { |
| atenl_nl_precal_sync_from_driver(an, PREK_SYNC_DPD_6G); |
| } else if (!strncmp(s, "group clean", 11)) { |
| atenl_nl_precal_sync_from_driver(an, PREK_CLEAN_GROUP); |
| } else if (!strncmp(s, "dpd clean", 9)) { |
| atenl_nl_precal_sync_from_driver(an, PREK_CLEAN_DPD); |
| } else if (!strncmp(s, "sync", 4)) { |
| atenl_nl_precal_sync_from_driver(an, PREK_SYNC_ALL); |
| } |
| } else if (!strncmp(s, "ibf sync", 8)) { |
| atenl_get_ibf_cal_result(an); |
| } else { |
| atenl_err("Unknown eeprom command: %s\n", cmd); |
| } |
| } else { |
| atenl_err("Unknown command: %s\n", cmd); |
| } |
| } |