| diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile |
| index 17e0d945..c73238a2 100644 |
| --- a/package/kernel/mac80211/Makefile |
| +++ b/package/kernel/mac80211/Makefile |
| @@ -20,6 +20,7 @@ PKG_SOURCE:=backports-$(PKG_VERSION).tar.xz |
| PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/backports-$(PKG_VERSION) |
| PKG_BUILD_PARALLEL:=1 |
| |
| +SOURCE_PATH:=./src |
| PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name> |
| |
| PKG_DRIVERS = \ |
| @@ -72,6 +73,10 @@ config-y:= \ |
| WLAN_VENDOR_ST \ |
| WLAN_VENDOR_TI \ |
| WLAN_VENDOR_ZYDAS \ |
| + MAC80211_DEBUG_MENU \ |
| + MAC80211_MLME_DEBUG \ |
| + MAC80211_STA_DEBUG \ |
| + MAC80211_HT_DEBUG \ |
| |
| config-$(call config_package,cfg80211) += CFG80211 |
| config-$(CONFIG_PACKAGE_CFG80211_TESTMODE) += NL80211_TESTMODE |
| @@ -297,6 +302,7 @@ define Build/Prepare |
| mkdir -p $(PKG_BUILD_DIR) |
| $(PKG_UNPACK) |
| $(Build/Patch) |
| + $(CP) $(SOURCE_PATH)/* $(PKG_BUILD_DIR) 2>/dev/null || : |
| rm -rf \ |
| $(PKG_BUILD_DIR)/include/linux/ssb \ |
| $(PKG_BUILD_DIR)/include/linux/bcma \ |
| diff --git a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh |
| index 6572999f..5e44e663 100644 |
| --- a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh |
| +++ b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh |
| @@ -29,10 +29,12 @@ drv_mac80211_init_device_config() { |
| config_add_string path phy 'macaddr:macaddr' |
| config_add_string tx_burst |
| config_add_string distance |
| + config_add_int mbssid mu_onoff sr_enable sr_enhanced rnr obss_interval |
| config_add_int beacon_int chanbw frag rts |
| config_add_int rxantenna txantenna txpower min_tx_power |
| config_add_int num_global_macaddr multiple_bssid |
| config_add_boolean noscan ht_coex acs_exclude_dfs background_radar |
| + config_add_boolean noscan ht_coex acs_exclude_dfs background_radar background_cert_mode |
| config_add_array ht_capab |
| config_add_array channels |
| config_add_array scan_list |
| @@ -55,7 +57,10 @@ drv_mac80211_init_device_config() { |
| he_spr_sr_control \ |
| he_spr_psr_enabled \ |
| he_bss_color_enabled \ |
| - he_twt_required |
| + he_twt_required \ |
| + he_twt_responder \ |
| + etxbfen \ |
| + itxbfen |
| config_add_int \ |
| beamformer_antennas \ |
| beamformee_antennas \ |
| @@ -142,13 +147,11 @@ mac80211_hostapd_setup_base() { |
| [ -n "$acs_exclude_dfs" ] && [ "$acs_exclude_dfs" -gt 0 ] && |
| append base_cfg "acs_exclude_dfs=1" "$N" |
| |
| - json_get_vars noscan ht_coex min_tx_power:0 tx_burst |
| + json_get_vars noscan ht_coex min_tx_power:0 tx_burst mbssid mu_onoff rnr obss_interval |
| + json_get_vars etxbfen:1 itxbfen:0 |
| json_get_values ht_capab_list ht_capab |
| json_get_values channel_list channels |
| |
| - [ "$auto_channel" = 0 ] && [ -z "$channel_list" ] && \ |
| - channel_list="$channel" |
| - |
| [ "$min_tx_power" -gt 0 ] && append base_cfg "min_tx_power=$min_tx_power" "$N" |
| |
| set_default noscan 0 |
| @@ -162,21 +165,42 @@ mac80211_hostapd_setup_base() { |
| ieee80211n=1 |
| ht_capab= |
| case "$htmode" in |
| - VHT20|HT20|HE20) ;; |
| - HT40*|VHT40|VHT80|VHT160|HE40|HE80|HE160) |
| + VHT20|HT20|HE20|EHT20) ;; |
| + HT40*|VHT40|VHT80|VHT160|HE40*|HE80|HE160|EHT40*|EHT80|EHT160|EHT320*) |
| case "$hwmode" in |
| a) |
| case "$(( (($channel / 4) + $chan_ofs) % 2 ))" in |
| 1) ht_capab="[HT40+]";; |
| 0) ht_capab="[HT40-]";; |
| esac |
| + case "$htmode" in |
| + HT40-|HE40-|EHT40-) |
| + if [ "$auto_channel" -gt 0 ]; then |
| + ht_capab="[HT40-]" |
| + fi |
| + ;; |
| + esac |
| ;; |
| *) |
| case "$htmode" in |
| - HT40+) ht_capab="[HT40+]";; |
| - HT40-) ht_capab="[HT40-]";; |
| + HT40+|HE40+|EHT40+) |
| + if [ "$channel" -gt 9 ]; then |
| + echo "Could not set the center freq with this HT mode setting" |
| + return 1 |
| + else |
| + ht_capab="[HT40+]" |
| + fi |
| + ;; |
| + HT40-|HE40-|EHT40-) |
| + if [ "$channel" -lt 5 -a "$auto_channel" -eq 0 ]; then |
| + echo "Could not set the center freq with this HT mode setting" |
| + return 1 |
| + else |
| + ht_capab="[HT40-]" |
| + fi |
| + ;; |
| *) |
| - if [ "$channel" -lt 7 ]; then |
| + if [ "$channel" -lt 7 -o "$auto_channel" -gt 0 ]; then |
| ht_capab="[HT40+]" |
| else |
| ht_capab="[HT40-]" |
| @@ -185,7 +209,6 @@ mac80211_hostapd_setup_base() { |
| esac |
| ;; |
| esac |
| - [ "$auto_channel" -gt 0 ] && ht_capab="[HT40+]" |
| ;; |
| *) ieee80211n= ;; |
| esac |
| @@ -196,6 +219,11 @@ mac80211_hostapd_setup_base() { |
| set_default ht_coex 0 |
| append base_cfg "ht_coex=$ht_coex" "$N" |
| |
| + [ "$ht_coex" -eq 1 ] && { |
| + set_default obss_interval 300 |
| + append base_cfg "obss_interval=$obss_interval" "$N" |
| + } |
| + |
| json_get_vars \ |
| ldpc:1 \ |
| greenfield:0 \ |
| @@ -207,7 +235,7 @@ mac80211_hostapd_setup_base() { |
| dsss_cck_40:1 |
| |
| ht_cap_mask=0 |
| - for cap in $(iw phy "$phy" info | grep 'Capabilities:' | cut -d: -f2); do |
| + for cap in $(iw phy "$phy" info | grep 'Capabilities: 0x' | cut -d: -f2); do |
| ht_cap_mask="$(($ht_cap_mask | $cap))" |
| done |
| |
| @@ -238,8 +266,8 @@ mac80211_hostapd_setup_base() { |
| |
| idx="$channel" |
| case "$htmode" in |
| - VHT20|HE20) enable_ac=1;; |
| - VHT40|HE40) |
| + VHT20|HE20|EHT20) enable_ac=1;; |
| + VHT40|HE40|EHT40) |
| case "$(( (($channel / 4) + $chan_ofs) % 2 ))" in |
| 1) idx=$(($channel + 2));; |
| 0) idx=$(($channel - 2));; |
| @@ -247,7 +275,7 @@ mac80211_hostapd_setup_base() { |
| enable_ac=1 |
| vht_center_seg0=$idx |
| ;; |
| - VHT80|HE80) |
| + VHT80|HE80|EHT80) |
| case "$(( (($channel / 4) + $chan_ofs) % 4 ))" in |
| 1) idx=$(($channel + 6));; |
| 2) idx=$(($channel + 2));; |
| @@ -258,7 +286,7 @@ mac80211_hostapd_setup_base() { |
| vht_oper_chwidth=1 |
| vht_center_seg0=$idx |
| ;; |
| - VHT160|HE160) |
| + VHT160|HE160|EHT160) |
| if [ "$band" = "6g" ]; then |
| case "$channel" in |
| 1|5|9|13|17|21|25|29) idx=15;; |
| @@ -273,23 +301,64 @@ mac80211_hostapd_setup_base() { |
| case "$channel" in |
| 36|40|44|48|52|56|60|64) idx=50;; |
| 100|104|108|112|116|120|124|128) idx=114;; |
| + 149|153|157|161|165|169|173|177) idx=163;; |
| esac |
| fi |
| enable_ac=1 |
| vht_oper_chwidth=2 |
| vht_center_seg0=$idx |
| ;; |
| + EHT320*) |
| + case "$channel" in |
| + 1|5|9|13|17|21|25|29) idx=31;; |
| + 33|37|41|45|49|53|57|61| \ |
| + 65|69|73|77|81|85|89|93) idx=63;; |
| + 97|101|105|109|113|117|121|125| \ |
| + 129|133|137|141|145|149|153|157) idx=127;; |
| + 161|165|169|173|177|181|185|189| \ |
| + 193|197|201|205|209|213|217|221) idx=191;; |
| + esac |
| + if [[ "$htmode" = "EHT320-1" && "$channel" -ge "193" ]] || |
| + [[ "$htmode" = "EHT320-2" && "$channel" -le "29" ]]; then |
| + echo "Could not set the center freq with this EHT setting" |
| + return 1 |
| + elif [[ "$htmode" = "EHT320-1" && "$channel" -ge "33" ]]; then |
| + if [ "$channel" -gt $idx ]; then |
| + idx=$(($idx + 32)) |
| + else |
| + idx=$(($idx - 32)) |
| + fi |
| + fi |
| + vht_oper_chwidth=2 |
| + if [ "$channel" -gt $idx ]; then |
| + vht_center_seg0=$(($idx + 16)) |
| + else |
| + vht_center_seg0=$(($idx - 16)) |
| + fi |
| + eht_oper_chwidth=9 |
| + eht_oper_centr_freq_seg0_idx=$idx |
| + |
| + case $htmode in |
| + EHT320-1) eht_bw320_offset=1;; |
| + EHT320-2) eht_bw320_offset=2;; |
| + EHT320) eht_bw320_offset=0;; |
| + esac |
| + ;; |
| esac |
| [ "$band" = "5g" ] && { |
| - json_get_vars background_radar:0 |
| + json_get_vars \ |
| + background_radar:0 \ |
| + background_cert_mode:0 \ |
| |
| [ "$background_radar" -eq 1 ] && append base_cfg "enable_background_radar=1" "$N" |
| + [ "$background_cert_mode" -eq 1 ] && append base_cfg "background_radar_mode=1" "$N" |
| } |
| [ "$band" = "6g" ] && { |
| op_class= |
| case "$htmode" in |
| - HE20) op_class=131;; |
| - HE*) op_class=$((132 + $vht_oper_chwidth)) |
| + HE20|EHT20) op_class=131;; |
| + EHT320*) op_class=137;; |
| + HE*|EHT*) op_class=$((132 + $vht_oper_chwidth)) |
| esac |
| [ -n "$op_class" ] && append base_cfg "op_class=$op_class" "$N" |
| } |
| @@ -317,7 +386,6 @@ mac80211_hostapd_setup_base() { |
| vht_link_adapt:3 \ |
| vht160:2 |
| |
| - set_default tx_burst 2.0 |
| append base_cfg "ieee80211ac=1" "$N" |
| vht_cap=0 |
| for cap in $(iw phy "$phy" info | awk -F "[()]" '/VHT Capabilities/ { print $2 }'); do |
| @@ -336,6 +404,12 @@ mac80211_hostapd_setup_base() { |
| short_gi_160=0 |
| } |
| |
| + [ "$etxbfen" -eq 0 ] && { |
| + su_beamformer=0 |
| + su_beamformee=0 |
| + mu_beamformer=0 |
| + } |
| + |
| mac80211_add_capabilities vht_capab $vht_cap \ |
| RXLDPC:0x10::$rxldpc \ |
| SHORT-GI-80:0x20::$short_gi_80 \ |
| @@ -417,7 +491,7 @@ mac80211_hostapd_setup_base() { |
| # 802.11ax |
| enable_ax=0 |
| case "$htmode" in |
| - HE*) enable_ax=1 ;; |
| + HE*|EHT*) enable_ax=1 ;; |
| esac |
| |
| if [ "$enable_ax" != "0" ]; then |
| @@ -426,10 +500,11 @@ mac80211_hostapd_setup_base() { |
| he_su_beamformee:1 \ |
| he_mu_beamformer:1 \ |
| he_twt_required:0 \ |
| + he_twt_responder \ |
| he_spr_sr_control:3 \ |
| he_spr_psr_enabled:0 \ |
| he_spr_non_srg_obss_pd_max_offset:0 \ |
| - he_bss_color:128 \ |
| + he_bss_color \ |
| he_bss_color_enabled:1 |
| |
| he_phy_cap=$(iw phy "$phy" info | sed -n '/HE Iftypes: AP/,$p' | awk -F "[()]" '/HE PHY Capabilities/ { print $2 }' | head -1) |
| @@ -443,6 +518,11 @@ mac80211_hostapd_setup_base() { |
| append base_cfg "he_oper_centr_freq_seg0_idx=$vht_center_seg0" "$N" |
| } |
| |
| + [ "$etxbfen" -eq 0 ] && { |
| + he_su_beamformer=0 |
| + he_mu_beamformer=0 |
| + } |
| + |
| mac80211_add_he_capabilities \ |
| he_su_beamformer:${he_phy_cap:6:2}:0x80:$he_su_beamformer \ |
| he_su_beamformee:${he_phy_cap:8:2}:0x1:$he_su_beamformee \ |
| @@ -450,7 +530,14 @@ mac80211_hostapd_setup_base() { |
| he_spr_psr_enabled:${he_phy_cap:14:2}:0x1:$he_spr_psr_enabled \ |
| he_twt_required:${he_mac_cap:0:2}:0x6:$he_twt_required |
| |
| + if [ -n "$he_twt_responder" ]; then |
| + append base_cfg "he_twt_responder=$he_twt_responder" "$N" |
| + fi |
| if [ "$he_bss_color_enabled" -gt 0 ]; then |
| + if !([ "$he_bss_color" -gt 0 ] && [ "$he_bss_color" -le 64 ]); then |
| + rand=$(head -n 1 /dev/urandom | tr -dc 0-9 | head -c 2) |
| + he_bss_color=$((rand % 63 + 1)) |
| + fi |
| append base_cfg "he_bss_color=$he_bss_color" "$N" |
| [ "$he_spr_non_srg_obss_pd_max_offset" -gt 0 ] && { \ |
| append base_cfg "he_spr_non_srg_obss_pd_max_offset=$he_spr_non_srg_obss_pd_max_offset" "$N" |
| @@ -469,26 +556,58 @@ mac80211_hostapd_setup_base() { |
| append base_cfg "he_mu_edca_qos_info_q_ack=0" "$N" |
| append base_cfg "he_mu_edca_qos_info_queue_request=0" "$N" |
| append base_cfg "he_mu_edca_qos_info_txop_request=0" "$N" |
| - append base_cfg "he_mu_edca_ac_be_aifsn=8" "$N" |
| + append base_cfg "he_mu_edca_ac_be_aifsn=0" "$N" |
| append base_cfg "he_mu_edca_ac_be_aci=0" "$N" |
| append base_cfg "he_mu_edca_ac_be_ecwmin=9" "$N" |
| append base_cfg "he_mu_edca_ac_be_ecwmax=10" "$N" |
| - append base_cfg "he_mu_edca_ac_be_timer=255" "$N" |
| - append base_cfg "he_mu_edca_ac_bk_aifsn=15" "$N" |
| + append base_cfg "he_mu_edca_ac_be_timer=3" "$N" |
| + append base_cfg "he_mu_edca_ac_bk_aifsn=0" "$N" |
| append base_cfg "he_mu_edca_ac_bk_aci=1" "$N" |
| append base_cfg "he_mu_edca_ac_bk_ecwmin=9" "$N" |
| append base_cfg "he_mu_edca_ac_bk_ecwmax=10" "$N" |
| - append base_cfg "he_mu_edca_ac_bk_timer=255" "$N" |
| + append base_cfg "he_mu_edca_ac_bk_timer=3" "$N" |
| append base_cfg "he_mu_edca_ac_vi_ecwmin=5" "$N" |
| append base_cfg "he_mu_edca_ac_vi_ecwmax=7" "$N" |
| - append base_cfg "he_mu_edca_ac_vi_aifsn=5" "$N" |
| + append base_cfg "he_mu_edca_ac_vi_aifsn=0" "$N" |
| append base_cfg "he_mu_edca_ac_vi_aci=2" "$N" |
| - append base_cfg "he_mu_edca_ac_vi_timer=255" "$N" |
| - append base_cfg "he_mu_edca_ac_vo_aifsn=5" "$N" |
| + append base_cfg "he_mu_edca_ac_vi_timer=3" "$N" |
| + append base_cfg "he_mu_edca_ac_vo_aifsn=0" "$N" |
| append base_cfg "he_mu_edca_ac_vo_aci=3" "$N" |
| append base_cfg "he_mu_edca_ac_vo_ecwmin=5" "$N" |
| append base_cfg "he_mu_edca_ac_vo_ecwmax=7" "$N" |
| - append base_cfg "he_mu_edca_ac_vo_timer=255" "$N" |
| + append base_cfg "he_mu_edca_ac_vo_timer=3" "$N" |
| + fi |
| + |
| + set_default tx_burst 2 |
| + |
| + # 802.11be |
| + enable_be=0 |
| + case "$htmode" in |
| + EHT*) enable_be=1 ;; |
| + esac |
| + |
| + if [ "$enable_be" != "0" ]; then |
| + append base_cfg "ieee80211be=1" "$N" |
| + if [ "$etxbfen" -eq 0 ]; then |
| + append base_cfg "eht_su_beamformee=1" "$N" |
| + else |
| + append base_cfg "eht_su_beamformer=1" "$N" |
| + append base_cfg "eht_su_beamformee=1" "$N" |
| + append base_cfg "eht_mu_beamformer=1" "$N" |
| + fi |
| + [ "$hwmode" = "a" ] && { |
| + case $htmode in |
| + EHT320*) |
| + append base_cfg "eht_oper_chwidth=$eht_oper_chwidth" "$N" |
| + append base_cfg "eht_oper_centr_freq_seg0_idx=$eht_oper_centr_freq_seg0_idx" "$N" |
| + append base_cfg "eht_bw320_offset=$eht_bw320_offset" "$N" |
| + ;; |
| + *) |
| + append base_cfg "eht_oper_chwidth=$vht_oper_chwidth" "$N" |
| + append base_cfg "eht_oper_centr_freq_seg0_idx=$vht_center_seg0" "$N" |
| + ;; |
| + esac |
| + } |
| fi |
| |
| hostapd_prepare_device_config "$hostapd_conf_file" nl80211 |
| @@ -497,6 +616,10 @@ ${channel:+channel=$channel} |
| ${channel_list:+chanlist=$channel_list} |
| ${hostapd_noscan:+noscan=1} |
| ${tx_burst:+tx_queue_data2_burst=$tx_burst} |
| +${mbssid:+mbssid=$mbssid} |
| +${mu_onoff:+mu_onoff=$mu_onoff} |
| +${itxbfen:+ibf_enable=$itxbfen} |
| +${rnr:+rnr=$rnr} |
| ${multiple_bssid:+mbssid=$multiple_bssid} |
| #num_global_macaddr=$num_global_macaddr |
| $base_cfg |
| @@ -524,7 +647,7 @@ mac80211_hostapd_setup_bss() { |
| append hostapd_cfg "wds_sta=1" "$N" |
| [ -n "$wds_bridge" ] && append hostapd_cfg "wds_bridge=$wds_bridge" "$N" |
| } |
| - [ "$staidx" -gt 0 -o "$start_disabled" -eq 1 ] && append hostapd_cfg "start_disabled=1" "$N" |
| + [ "$start_disabled" -eq 1 ] && append hostapd_cfg "start_disabled=1" "$N" |
| |
| cat >> /var/run/hostapd-$phy.conf <<EOF |
| $hostapd_cfg |
| @@ -535,6 +658,31 @@ ${max_listen_int:+max_listen_interval=$max_listen_int} |
| EOF |
| } |
| |
| +mac80211_generate_mbssid_mac() { |
| + local phy="$1" |
| + local transmitted_bssid="$2" |
| + local id="${mbssidx:-0}" |
| + |
| + local ref="$(cat /sys/class/ieee80211/${phy}/macaddress)" |
| + |
| + if [ -z "$transmitted_bssid" ]; then |
| + transmitted_bssid=$ref |
| + fi |
| + |
| + if [ $id -eq 0 ]; then |
| + echo "$transmitted_bssid" |
| + return |
| + fi |
| + |
| + local oIFS="$IFS"; IFS=":"; set -- $transmitted_bssid; IFS="$oIFS" |
| + |
| + # Calculate nontransmitted bssid |
| + b6="0x$6" |
| + ref_b6=$(($b6 % $max_mbssid)) |
| + b6=$(($b6 - $ref_b6 + ($ref_b6 + $id) % $max_mbssid)) |
| + printf "%s:%s:%s:%s:%s:%02x" $1 $2 $3 $4 $5 $b6 |
| +} |
| + |
| mac80211_get_addr() { |
| local phy="$1" |
| local idx="$(($2 + 1))" |
| @@ -658,7 +806,19 @@ mac80211_prepare_vif() { |
| json_add_string _ifname "$ifname" |
| |
| default_macaddr= |
| - if [ -z "$macaddr" ]; then |
| + if [ "$mbssid" -gt 0 ] && [ "$mode" == "ap" ]; then |
| + [ "$mbssidx" -eq 0 ] && { |
| + if [ -z $macaddr ]; then |
| + transmitted_bssid="$(mac80211_generate_mac $phy)" |
| + else |
| + # uci set mac address |
| + transmitted_bssid=$macaddr |
| + fi |
| + macidx="$(($macidx + 1))" |
| + } |
| + macaddr="$(mac80211_generate_mbssid_mac $phy $transmitted_bssid)" |
| + mbssidx="$(($mbssidx + 1))" |
| + elif [ -z "$macaddr" ]; then |
| macaddr="$(mac80211_generate_mac $phy)" |
| macidx="$(($macidx + 1))" |
| default_macaddr=1 |
| @@ -916,12 +1076,28 @@ wpa_supplicant_set_config() { |
| } |
| |
| hostapd_set_config() { |
| + |
| + if [ "$inconsistent_country" -eq 1 ]; then |
| + echo "ERROR: Please use the same country for all the radios." |
| + wireless_setup_failed HOSTAPD_START_FAILED |
| + drv_mac80211_teardown |
| + return |
| + fi |
| + |
| [ -n "$hostapd_ctrl" ] || { |
| ubus_call hostapd config_set '{ "phy": "'"$phy"'", "config": "", "prev_config": "'"${hostapd_conf_file}.prev"'" }' > /dev/null |
| return 0; |
| } |
| |
| ubus wait_for hostapd |
| + |
| + # each phy sleeps different times to prevent for ubus race condition. |
| + if [ "$phy" = "phy1" ]; then |
| + sleep 3; |
| + elif [ "$phy" = "phy2" ]; then |
| + sleep 6; |
| + fi |
| + |
| local hostapd_res="$(ubus_call hostapd config_set "{ \"phy\": \"$phy\", \"config\":\"${hostapd_conf_file}\", \"prev_config\": \"${hostapd_conf_file}.prev\"}")" |
| ret="$?" |
| [ "$ret" != 0 -o -z "$hostapd_res" ] && { |
| @@ -999,6 +1175,9 @@ mac80211_setup_vif() { |
| |
| json_select .. |
| [ -n "$failed" ] || wireless_add_vif "$name" "$ifname" |
| + |
| + echo "Setup SMP Affinity" |
| + /sbin/smp-mt76.sh |
| } |
| |
| get_freq() { |
| @@ -1050,6 +1229,25 @@ mac80211_reset_config() { |
| wdev_tool "$phy" set_config '{}' |
| } |
| |
| +mac80211_count_ap() { |
| + total_num_ap=$(($total_num_ap + 1)) |
| +} |
| + |
| +country_consistent_check() { |
| + local i |
| + inconsistent_country=0 |
| + country_list="$(cat /etc/config/wireless | grep country | cut -d ' ' -f3 | tr -s "'\n" ' ')" |
| + for i in $country_list |
| + do |
| + ret="$(echo $country_list | awk '{print ($2 == "" || $1 == $2)}')" |
| + [ $ret = '0' ] && { |
| + inconsistent_country=1 |
| + return |
| + } |
| + country_list="$(echo $country_list | sed -r 's/[A-Z]{2}( )*//')" |
| + done |
| +} |
| + |
| drv_mac80211_setup() { |
| json_select config |
| json_get_vars \ |
| @@ -1058,7 +1256,8 @@ drv_mac80211_setup() { |
| txpower \ |
| rxantenna txantenna \ |
| frag rts beacon_int:100 htmode \ |
| - num_global_macaddr:1 multiple_bssid |
| + num_global_macaddr:1 multiple_bssid \ |
| + sr_enable sr_enhanced |
| json_get_values basic_rate_list basic_rate |
| json_get_values scan_list scan_list |
| json_select .. |
| @@ -1093,6 +1292,7 @@ drv_mac80211_setup() { |
| |
| macidx=0 |
| staidx=0 |
| + mbssidx=0 |
| |
| [ -n "$chanbw" ] && { |
| for file in /sys/kernel/debug/ieee80211/$phy/ath9k*/chanbw /sys/kernel/debug/ieee80211/$phy/ath5k/bwmode; do |
| @@ -1141,14 +1341,29 @@ drv_mac80211_setup() { |
| |
| wpa_supplicant_init_config |
| |
| + total_num_ap=0 |
| + max_mbssid=1 |
| + for_each_interface "ap" mac80211_count_ap |
| + total_num_ap=$(($total_num_ap - 1)) |
| + while [ $total_num_ap -gt 0 ] |
| + do |
| + total_num_ap=$(($total_num_ap >> 1)) |
| + max_mbssid=$(($max_mbssid << 1)) |
| + done |
| + |
| mac80211_prepare_iw_htmode |
| active_ifnames= |
| for_each_interface "ap sta adhoc mesh monitor" mac80211_prepare_vif |
| for_each_interface "ap sta adhoc mesh monitor" mac80211_setup_vif |
| |
| + country_consistent_check |
| + |
| [ -x /usr/sbin/wpa_supplicant ] && wpa_supplicant_set_config "$phy" |
| [ -x /usr/sbin/hostapd ] && hostapd_set_config "$phy" |
| |
| + [ -n "$sr_enable" ] && echo "$sr_enable" > /sys/kernel/debug/ieee80211/$phy/mt76/sr_enable |
| + [ -n "$sr_enhanced" ] && echo "$sr_enhanced" > /sys/kernel/debug/ieee80211/$phy/mt76/sr_enhanced_enable |
| + |
| [ -x /usr/sbin/wpa_supplicant ] && wpa_supplicant_start "$phy" |
| |
| json_set_namespace wdev_uc prev |
| diff --git a/package/kernel/mac80211/files/lib/wifi/mac80211.sh b/package/kernel/mac80211/files/lib/wifi/mac80211.sh |
| index e24a2a63..58a0c9ff 100644 |
| --- a/package/kernel/mac80211/files/lib/wifi/mac80211.sh |
| +++ b/package/kernel/mac80211/files/lib/wifi/mac80211.sh |
| @@ -60,6 +60,9 @@ BEGIN { |
| if (vht && band != "1:") mode="VHT80" |
| if (he) mode="HE80" |
| if (he && band == "1:") mode="HE20" |
| + if (eht && band == "2:") mode="EHT160" |
| + if (eht && band == "4:") mode="EHT320" |
| + if (eht && band == "1:") mode="EHT20" |
| sub("\\[", "", channel) |
| sub("\\]", "", channel) |
| bands = bands band channel ":" mode " " |
| @@ -73,6 +76,7 @@ $1 == "Band" { |
| vht = "" |
| ht = "" |
| he = "" |
| + eht = "" |
| } |
| |
| $0 ~ "Capabilities:" { |
| @@ -87,6 +91,18 @@ $0 ~ "HE Iftypes" { |
| he=1 |
| } |
| |
| +$0 ~ "EHT Iftypes" { |
| + eht=1 |
| +} |
| + |
| +$0 ~ / *HE MAC Capabilities \(0x000000000000\)/ { |
| + he=0 |
| +} |
| + |
| +$0 ~ / *EHT MAC Capabilities \(0x0000\)/ { |
| + eht=0 |
| +} |
| + |
| $1 == "*" && $3 == "MHz" && $0 !~ /disabled/ && band && !channel { |
| channel = $4 |
| } |
| @@ -120,6 +136,26 @@ get_band_defaults() { |
| mode_band="$band" |
| channel="$chan" |
| htmode="$mode" |
| + if [ "$band" = "6g" ] |
| + then |
| + encryption=sae |
| + key=12345678 |
| + sae_pwe=2 |
| + ieee80211w=2 |
| + channel=37 |
| + mbssid=1 |
| + mbo=1 |
| + elif [ "$band" = "5g" ] |
| + then |
| + noscan=1 |
| + encryption=none |
| + rnr=1 |
| + background_radar=1 |
| + else |
| + noscan=1 |
| + encryption=none |
| + rnr=1 |
| + fi |
| done |
| } |
| |
| @@ -153,6 +189,10 @@ detect_mac80211() { |
| |
| json_load_file /etc/board.json |
| |
| + # generate random bytes for macaddr |
| + rand=$(hexdump -C /dev/urandom | head -n 1 &) |
| + killall hexdump |
| + |
| for _dev in /sys/class/ieee80211/*; do |
| [ -e "$_dev" ] || continue |
| |
| @@ -162,6 +202,14 @@ detect_mac80211() { |
| channel="" |
| htmode="" |
| ht_capab="" |
| + encryption="" |
| + noscan="" |
| + key="" |
| + sae_pwe="" |
| + ieee80211w="" |
| + mbssid="" |
| + rnr="" |
| + background_radar="" |
| |
| get_band_defaults "$dev" |
| |
| @@ -196,6 +244,19 @@ detect_mac80211() { |
| ;; |
| esac |
| |
| + macaddr="" |
| + if (dmesg | grep -q "eeprom load fail"); then |
| + for i in $(seq 2 3); do |
| + macaddr=${macaddr}:$(echo $rand | cut -d ' ' -f $i) |
| + done |
| + macaddr="00:0$(($devidx - 1)):55:66${macaddr}" |
| + fi |
| + |
| + tx_burst="" |
| + if (lspci | grep -q "7992"); then |
| + tx_burst=0.0 |
| + fi |
| + |
| uci -q batch <<-EOF |
| set wireless.${name}=wifi-device |
| set wireless.${name}.type=mac80211 |
| @@ -203,15 +264,49 @@ detect_mac80211() { |
| set wireless.${name}.channel=${channel} |
| set wireless.${name}.band=${mode_band} |
| set wireless.${name}.htmode=$htmode |
| - set wireless.${name}.disabled=1 |
| + set wireless.${name}.country='US' |
| + set wireless.${name}.noscan=${noscan} |
| + set wireless.${name}.disabled=0 |
| +EOF |
| + [ -n "$mbssid" ] && { |
| + uci -q set wireless.${name}.mbssid=${mbssid} |
| + } |
| + [ -n "$rnr" ] && { |
| + uci -q set wireless.${name}.rnr=${rnr} |
| + } |
| + [ -n "$background_radar" ] && { |
| + uci -q set wireless.${name}.background_radar=${background_radar} |
| + } |
| + [ -n "$tx_burst" ] && { |
| + uci -q set wireless.${name}.tx_burst=${tx_burst} |
| + } |
| |
| + uci -q batch <<-EOF |
| set wireless.default_${name}=wifi-iface |
| set wireless.default_${name}.device=${name} |
| set wireless.default_${name}.network=lan |
| set wireless.default_${name}.mode=ap |
| - set wireless.default_${name}.ssid=OpenWrt |
| - set wireless.default_${name}.encryption=none |
| + set wireless.default_${name}.ssid=OpenWrt-${mode_band} |
| + set wireless.default_${name}.encryption=${encryption} |
| EOF |
| + |
| + # calibrated board will use eeprom macaddress, not ramdom address |
| + [ -n "$macaddr" ] && { |
| + uci -q set wireless.default_${name}.macaddr=${macaddr} |
| + } |
| + |
| + [ -n "$key" ] && { |
| + uci -q set wireless.default_${name}.key=${key} |
| + } |
| + [ -n "$sae_pwe" ] && { |
| + uci -q set wireless.default_${name}.sae_pwe=${sae_pwe} |
| + } |
| + [ -n "$ieee80211w" ] && { |
| + uci -q set wireless.default_${name}.ieee80211w=${ieee80211w} |
| + } |
| + [ -n "$mbo" ] && { |
| + uci -q set wireless.default_${name}.mbo=${mbo} |
| + } |
| uci -q commit wireless |
| done |
| } |
| diff --git a/package/network/services/hostapd/files/hostapd.sh b/package/network/services/hostapd/files/hostapd.sh |
| index 271c1f7b..80b95116 100644 |
| --- a/package/network/services/hostapd/files/hostapd.sh |
| +++ b/package/network/services/hostapd/files/hostapd.sh |
| @@ -60,7 +60,14 @@ hostapd_append_wpa_key_mgmt() { |
| append wpa_key_mgmt "WPA-EAP-SHA256" |
| ;; |
| sae) |
| - append wpa_key_mgmt "SAE" |
| + case "$encryption" in |
| + *sae-ext*) |
| + append wpa_key_mgmt "SAE-EXT-KEY" |
| + ;; |
| + *) |
| + append wpa_key_mgmt "SAE" |
| + ;; |
| + esac |
| [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE" |
| ;; |
| psk-sae) |
| @@ -119,6 +126,7 @@ hostapd_common_add_device_config() { |
| config_add_int rts_threshold |
| config_add_int rssi_reject_assoc_rssi |
| config_add_int rssi_ignore_probe_request |
| + config_add_int rssi_reject_assoc_timeout |
| config_add_int maxassoc |
| |
| config_add_string acs_chan_bias |
| @@ -231,8 +239,10 @@ hostapd_prepare_device_config() { |
| hostapd_add_rate brlist "$br" |
| done |
| |
| + json_get_vars rssi_reject_assoc_timeout |
| [ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N" |
| [ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N" |
| + [ -n "$rssi_reject_assoc_timeout" ] && append base_cfg "rssi_reject_assoc_timeout=$rssi_reject_assoc_timeout" "$N" |
| [ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N" |
| [ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N" |
| [ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N" |
| @@ -383,6 +393,25 @@ hostapd_common_add_bss_config() { |
| config_add_string fils_dhcp |
| |
| config_add_int ocv |
| + |
| + config_add_int disable_eht |
| + config_add_int disable_he |
| + config_add_int disable_vht |
| + config_add_int disable_ht |
| + |
| + config_add_boolean beacon_prot interworking |
| + |
| + config_add_int unsol_bcast_probe_resp_interval |
| + config_add_int fils_discovery_min_interval |
| + config_add_int fils_discovery_max_interval |
| + config_add_boolean rnr |
| + |
| + config_add_array sae_groups |
| + config_add_array owe_groups |
| + config_add_array pairwise |
| + config_add_string group_cipher |
| + config_add_string group_mgmt_cipher |
| + |
| } |
| |
| hostapd_set_vlan_file() { |
| @@ -447,11 +476,11 @@ append_iw_nai_realm() { |
| } |
| |
| append_iw_venue_name() { |
| - append bss_conf "venue_name=$1" "$N" |
| + [ -n "$1" ] && append bss_conf "venue_name=$1" "$N" |
| } |
| |
| append_iw_venue_url() { |
| - append bss_conf "venue_url=$1" "$N" |
| + [ -n "$1" ] && append bss_conf "venue_url=$1" "$N" |
| } |
| |
| append_hs20_oper_friendly_name() { |
| @@ -569,7 +598,8 @@ hostapd_set_bss_options() { |
| ppsk airtime_bss_weight airtime_bss_limit airtime_sta_weight \ |
| multicast_to_unicast_all proxy_arp per_sta_vif \ |
| eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \ |
| - vendor_elements fils ocv |
| + vendor_elements fils ocv unsol_bcast_probe_resp_interval fils_discovery_min_interval \ |
| + fils_discovery_max_interval rnr group_cipher group_mgmt_cipher |
| |
| set_default fils 0 |
| set_default isolate 0 |
| @@ -796,6 +826,36 @@ hostapd_set_bss_options() { |
| local auth_algs="$((($auth_mode_shared << 1) | $auth_mode_open))" |
| append bss_conf "auth_algs=${auth_algs:-1}" "$N" |
| append bss_conf "wpa=$wpa" "$N" |
| + |
| + json_get_values pairwise pairwise |
| + json_get_vars group_cipher |
| + if [ -n "$pairwise" ]; then |
| + case "$pairwise" in |
| + *tkip+aes|*tkip+ccmp|*aes+tkip|*ccmp+tkip) |
| + wpa_cipher="CCMP TKIP" |
| + ;; |
| + *ccmp256) |
| + wpa_cipher="CCMP-256" |
| + ;; |
| + *aes|*ccmp) |
| + wpa_cipher="CCMP" |
| + ;; |
| + *tkip) |
| + wpa_cipher="TKIP" |
| + ;; |
| + *gcmp256) |
| + wpa_cipher="GCMP-256" |
| + ;; |
| + *gcmp) |
| + wpa_cipher="GCMP" |
| + ;; |
| + *) |
| + wpa_cipher="" |
| + ;; |
| + esac |
| + fi |
| + [ -n "$wpa_cipher" ] && wpa_pairwise="$wpa_cipher" |
| + |
| [ -n "$wpa_pairwise" ] && append bss_conf "wpa_pairwise=$wpa_pairwise" "$N" |
| |
| set_default wps_pushbutton 0 |
| @@ -847,7 +907,7 @@ hostapd_set_bss_options() { |
| } |
| |
| append bss_conf "ssid=$ssid" "$N" |
| - [ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge${N}wds_bridge=" "$N" |
| + [ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge${N}wds_bridge=$network_bridge" "$N" |
| [ -n "$network_ifname" ] && append bss_conf "snoop_iface=$network_ifname" "$N" |
| [ -n "$iapp_interface" ] && { |
| local ifname |
| @@ -962,6 +1022,8 @@ hostapd_set_bss_options() { |
| fi |
| |
| if [ "$wpa" -ge "2" ]; then |
| + json_get_values sae_groups sae_groups |
| + json_get_values owe_groups owe_groups |
| if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then |
| set_default auth_cache 1 |
| append bss_conf "rsn_preauth=1" "$N" |
| @@ -980,17 +1042,52 @@ hostapd_set_bss_options() { |
| append bss_conf "okc=$auth_cache" "$N" |
| [ "$auth_cache" = 0 -a "$fils" = 0 ] && append bss_conf "disable_pmksa_caching=1" "$N" |
| |
| + [ -z "$group_cipher" ] && group_cipher="$wpa_cipher" |
| + |
| + if [ -n "$sae_groups" -o -n "$owe_groups" ]; then |
| + case "$auth_type" in |
| + sae*) |
| + append bss_conf "sae_groups=$sae_groups" "$N" |
| + append bss_conf "group_cipher=$group_cipher" "$N" |
| + ;; |
| + owe) |
| + append bss_conf "owe_groups=$owe_groups" "$N" |
| + append bss_conf "group_cipher=$group_cipher" "$N" |
| + ;; |
| + esac |
| + fi |
| + |
| # RSN -> allow management frame protection |
| case "$ieee80211w" in |
| [012]) |
| - json_get_vars ieee80211w_mgmt_cipher ieee80211w_max_timeout ieee80211w_retry_timeout |
| + json_get_vars ieee80211w_mgmt_cipher ieee80211w_max_timeout ieee80211w_retry_timeout beacon_prot |
| append bss_conf "ieee80211w=$ieee80211w" "$N" |
| [ "$ieee80211w" -gt "0" ] && { |
| + if [ -z "$group_mgmt_cipher" ]; then |
| + case "$group_cipher" in |
| + CCMP-256) |
| + ieee80211w_mgmt_cipher="BIP-CMAC-256" |
| + ;; |
| + CCMP) |
| + ieee80211w_mgmt_cipher="AES-128-CMAC" |
| + ;; |
| + GCMP-256) |
| + ieee80211w_mgmt_cipher="BIP-GMAC-256" |
| + ;; |
| + GCMP) |
| + ieee80211w_mgmt_cipher="BIP-GMAC-128" |
| + ;; |
| + esac |
| + else |
| + ieee80211w_mgmt_cipher="$group_mgmt_cipher" |
| + fi |
| if [ "$auth_type" = "eap192" ]; then |
| append bss_conf "group_mgmt_cipher=BIP-GMAC-256" "$N" |
| else |
| append bss_conf "group_mgmt_cipher=${ieee80211w_mgmt_cipher:-AES-128-CMAC}" "$N" |
| fi |
| + [ -n "$beacon_prot" ] && \ |
| + append bss_conf "beacon_prot=$beacon_prot" "$N" |
| [ -n "$ieee80211w_max_timeout" ] && \ |
| append bss_conf "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N" |
| [ -n "$ieee80211w_retry_timeout" ] && \ |
| @@ -1055,9 +1152,10 @@ hostapd_set_bss_options() { |
| json_get_vars iw_roaming_consortium iw_domain_name iw_anqp_3gpp_cell_net iw_nai_realm |
| json_get_vars iw_anqp_elem iw_qos_map_set iw_ipaddr_type_availability iw_gas_address3 |
| json_get_vars iw_venue_name iw_venue_url |
| + json_get_vars interworking |
| |
| set_default iw_enabled 0 |
| - if [ "$iw_enabled" = "1" ]; then |
| + if [ "$iw_enabled" = "1" ] || [ "$interworking" = "1" ]; then |
| append bss_conf "interworking=1" "$N" |
| set_default iw_internet 1 |
| set_default iw_asra 0 |
| @@ -1164,6 +1262,22 @@ hostapd_set_bss_options() { |
| append bss_conf "$val" "$N" |
| done |
| |
| + if [ "$unsol_bcast_probe_resp_interval" -gt 0 ]; then |
| + append bss_conf "unsol_bcast_probe_resp_interval=$unsol_bcast_probe_resp_interval" "$N" |
| + fi |
| + |
| + if [ -n "$fils_discovery_min_interval" ]; then |
| + append bss_conf "fils_discovery_min_interval=$fils_discovery_min_interval" "$N" |
| + fi |
| + |
| + if [ -n "$fils_discovery_max_interval" ]; then |
| + append bss_conf "fils_discovery_max_interval=$fils_discovery_max_interval" "$N" |
| + fi |
| + |
| + if [ -n "$rnr" ]; then |
| + append bss_conf "rnr=$rnr" "$N" |
| + fi |
| + |
| append "$var" "$bss_conf" "$N" |
| return 0 |
| } |
| @@ -1251,6 +1365,7 @@ wpa_supplicant_prepare_interface() { |
| country_str="country=$country" |
| } |
| |
| + local tx_queue_data2_burst="tx_queue_data2_burst=0" |
| multiap_flag_file="${_config}.is_multiap" |
| if [ "$multi_ap" = "1" ]; then |
| touch "$multiap_flag_file" |
| @@ -1262,6 +1377,7 @@ wpa_supplicant_prepare_interface() { |
| ${scan_list:+freq_list=$scan_list} |
| $ap_scan |
| $country_str |
| +$tx_queue_data2_burst |
| EOF |
| return 0 |
| } |
| @@ -1533,12 +1649,39 @@ wpa_supplicant_add_network() { |
| ;; |
| esac |
| |
| - [ "$wpa_cipher" = GCMP ] && { |
| - append network_data "pairwise=GCMP" "$N$T" |
| - append network_data "group=GCMP" "$N$T" |
| - } |
| + json_get_values pairwise pairwise |
| + json_get_vars group_cipher group_mgmt_cipher |
| + if [ -n "$pairwise" ]; then |
| + case "$pairwise" in |
| + *tkip+aes|*tkip+ccmp|*aes+tkip|*ccmp+tkip) |
| + wpa_cipher="CCMP TKIP" |
| + ;; |
| + *ccmp256) |
| + wpa_cipher="CCMP-256" |
| + ;; |
| + *aes|*ccmp) |
| + wpa_cipher="CCMP" |
| + ;; |
| + *tkip) |
| + wpa_cipher="TKIP" |
| + ;; |
| + *gcmp256) |
| + wpa_cipher="GCMP-256" |
| + ;; |
| + *gcmp) |
| + wpa_cipher="GCMP" |
| + ;; |
| + *) |
| + wpa_cipher="" |
| + ;; |
| + esac |
| + fi |
| + [ -n "$wpa_cipher" ] && wpa_pairwise="$wpa_cipher" |
| |
| [ "$mode" = mesh ] || { |
| + json_get_values sae_groups sae_groups |
| + json_get_values owe_groups owe_groups |
| + |
| case "$wpa" in |
| 1) |
| append network_data "proto=WPA" "$N$T" |
| @@ -1548,12 +1691,58 @@ wpa_supplicant_add_network() { |
| ;; |
| esac |
| |
| + [ -n "$wpa_pairwise" ] && append network_data "pairwise=$wpa_pairwise" "$N$T" |
| + [ -z "$group_cipher" ] && group_cipher="$wpa_cipher" |
| + |
| + if [ -n "$sae_groups" -o -n "$owe_groups" ]; then |
| + case "$auth_type" in |
| + sae*) |
| + echo "sae_groups=$sae_groups" >> "$_config" |
| + append network_data "group=$group_cipher" "$N$T" |
| + ;; |
| + owe) |
| + append network_data "owe_group=$owe_groups" "$N$T" |
| + append network_data "group=$group_cipher" "$N$T" |
| + ;; |
| + esac |
| + fi |
| + |
| + # RSN -> allow management frame protection |
| case "$ieee80211w" in |
| [012]) |
| - [ "$wpa" -ge 2 ] && append network_data "ieee80211w=$ieee80211w" "$N$T" |
| + json_get_vars ieee80211w_mgmt_cipher ieee80211w_max_timeout ieee80211w_retry_timeout beacon_prot |
| + append network_data "ieee80211w=$ieee80211w" "$N$T" |
| + [ "$ieee80211w" -gt "0" ] && { |
| + if [ -z "$group_mgmt_cipher" ]; then |
| + case "$group_cipher" in |
| + CCMP-256) |
| + ieee80211w_mgmt_cipher="BIP-CMAC-256" |
| + ;; |
| + CCMP) |
| + ieee80211w_mgmt_cipher="AES-128-CMAC" |
| + ;; |
| + GCMP-256) |
| + ieee80211w_mgmt_cipher="BIP-GMAC-256" |
| + ;; |
| + GCMP) |
| + ieee80211w_mgmt_cipher="BIP-GMAC-128" |
| + ;; |
| + esac |
| + else |
| + ieee80211w_mgmt_cipher="$group_mgmt_cipher" |
| + fi |
| + if [ "$auth_type" = "eap192" ]; then |
| + append network_data "group_mgmt=BIP-GMAC-256" "$N$T" |
| + else |
| + append network_data "group_mgmt=${ieee80211w_mgmt_cipher:-AES-128-CMAC}" "$N$T" |
| + fi |
| + [ -n "$beacon_prot" ] && \ |
| + append network_data "beacon_prot=$beacon_prot" "$N$T" |
| + } |
| ;; |
| esac |
| } |
| + |
| [ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T" |
| [ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T" |
| |
| @@ -1564,6 +1753,20 @@ wpa_supplicant_add_network() { |
| [ -n "$bssid_blacklist" ] && append network_data "bssid_blacklist=$bssid_blacklist" "$N$T" |
| [ -n "$bssid_whitelist" ] && append network_data "bssid_whitelist=$bssid_whitelist" "$N$T" |
| |
| + local disable_eht |
| + local disable_he |
| + local disable_vht |
| + local disable_ht |
| + json_get_vars disable_eht |
| + json_get_vars disable_he |
| + json_get_vars disable_vht |
| + json_get_vars disable_ht |
| + |
| + [ -n "$disable_eht" ] && append network_data "disable_eht=$disable_eht" "$N$T" |
| + [ -n "$disable_he" ] && append network_data "disable_he=$disable_he" "$N$T" |
| + [ -n "$disable_vht" ] && append network_data "disable_vht=$disable_vht" "$N$T" |
| + [ -n "$disable_ht" ] && append network_data "disable_ht=$disable_ht" "$N$T" |
| + |
| [ -n "$basic_rate" ] && { |
| local br rate_list= |
| for br in $basic_rate; do |
| @@ -1578,6 +1781,11 @@ wpa_supplicant_add_network() { |
| append network_data "mcast_rate=$mc_rate" "$N$T" |
| } |
| |
| + if [ "$auth_type" = "sae" ]; then |
| + json_get_vars sae_pwe sae_pwe |
| + [ -n "$sae_pwe" ] && echo "sae_pwe=$sae_pwe" >> "$_config" |
| + fi |
| + |
| if [ "$key_mgmt" = "WPS" ]; then |
| echo "wps_cred_processing=1" >> "$_config" |
| else |