| ChangeLog : |
| =========== |
| |
| 2003/10/27 : 1.1.27 |
| - the configurable HTTP health check introduced in 1.1.23 revealed a shameful |
| bug : the code still assumed that HTTP requests were the same size as the |
| original ones (22 bytes), and failed if they were not. |
| - added support for pidfiles. |
| |
| 2003/10/22 : 1.1.26 |
| - the fix introduced in 1.1.25 for client timeouts while waiting for servers |
| broke almost all compatibility with POST requests, because the proxy |
| stopped to read anything from the client as soon as it got all of its |
| headers. |
| |
| 2003/10/15 : 1.1.25 |
| - added the 'tcplog' option, which provides enhanced, HTTP-like logs for |
| generic TCP proxies, or lighter logs for HTTP proxies. |
| - fixed a time-out condition wrongly reported as client time-out in data |
| phase if the client timeout was lower than the connect timeout times the |
| number of retries. |
| |
| 2003/09/21 : 1.1.24 |
| - if a client sent a full request then shut its write connection down, then |
| the request was aborted. This case was detected only when using haproxy |
| both as health-check client and as a server. |
| - if 'option httpchk' is used in a 'health' mode server, then responses will |
| change from 'OK' to 'HTTP/1.0 200 OK'. |
| - fixed a Linux-only bug in case of HTTP server health-checks, where a single |
| server response followed by a close could be ignored, and the server seen |
| as failed. |
| |
| 2003/09/19 : 1.1.23 |
| - fixed a stupid bug introduced in 1.1.22 which caused second and subsequent |
| 'default' sections to keep previous parameters, and not initialize logs |
| correctly. |
| - fixed a second stupid bug introduced in 1.1.22 which caused configurations |
| relying on 'dispatch' mode to segfault at the first connection. |
| - 'option httpchk' now supports method, HTTP version and a few headers. |
| - now, 'option httpchk', 'cookie' and 'capture' can be specified in |
| 'defaults' section |
| |
| 2003/09/10 : 1.1.22 |
| - 'listen' now supports optionnal address:port-range lists |
| - 'bind' introduced to add new listen addresses |
| - fixed a bug which caused a session to be kept established on a server till |
| it timed out if the client closed during the DATA phase. |
| - the port part of each server address can now be empty to make the proxy |
| connect to the server on the same port it was connected to, be an absolute |
| unsigned number to reflect a single port (as in older versions), or an |
| explicitly signed number (+N/-N) to indicate that this offset must be |
| applied to the port the proxy was connected to, when connecting to the |
| server. |
| - the 'port' server option allows the user to specify a different |
| health-check port than the service one. It is mandatory when only relative |
| ports have been specified and check is required. By default, the checks are |
| sent to the service port. |
| - new 'defaults' section which is rather similar to 'listen' except that all |
| values are only used as default values for future 'listen' sections, until |
| a new 'defaults' resets them. At the moment, server options, regexes, |
| cookie names and captures cannot be set in the 'defaults' section. |
| |
| 2003/05/06 : 1.1.21 |
| - changed the debug output format so that it now includes the session unique |
| ID followed by the instance name at the beginning of each line. |
| - in debug mode, accept now shows the client's IP and port. |
| - added one 3 small debugging scripts to search and pretty print debug output |
| - changed the default health check request to "OPTIONS /" instead of |
| "OPTIONS *" since not all servers implement the later one. |
| - "option httpchk" now accepts an optional parameter allowing the user to |
| specify and URI other than '/' during health-checks. |
| |
| 2003/04/21 : 1.1.20 |
| - fixed two problems with time-outs, one where a server would be logged as |
| timed out during transfer that take longer to complete than the fixed |
| time-out, and one where clients were logged as timed-out during the data |
| phase because they didn't have anything to send. This sometimes caused |
| slow client connections to close too early while in fact there was no |
| problem. The proper fix would be to have a per-fd time-out with |
| conditions depending on the state of the HTTP FSM. |
| |
| 2003/04/16 : 1.1.19 |
| - haproxy was NOT RFC compliant because it was case-sensitive on HTTP |
| "Cookie:" and "Set-Cookie:" headers. This caused JVM 1.4 to fail on |
| cookie persistence because it uses "cookie:". Two memcmp() have been |
| replaced with strncasecmp(). |
| |
| 2003/04/02 : 1.1.18 |
| - Haproxy can be compiled with PCRE regex instead of libc regex, by setting |
| REGEX=pcre on the make command line. |
| - HTTP health-checks now use "OPTIONS *" instead of "OPTIONS /". |
| - when explicit source address binding is required, it is now also used for |
| health-checks. |
| - added 'reqpass' and 'reqipass' to allow certain headers but not the request |
| itself. |
| - factored several strings to reduce binary size by about 2 kB. |
| - replaced setreuid() and setregid() with more standard setuid() and setgid(). |
| - added 4 status flags to the log line indicating who ended the connection |
| first, the sessions state, the validity of the cookie, and action taken on |
| the set-cookie header. |
| |
| 2002/10/18 : 1.1.17 |
| - add the notion of "backup" servers, which are used only when all other |
| servers are down. |
| - make Set-Cookie return "" instead of "(null)" when the server has no |
| cookie assigned (useful for backup servers). |
| - "log" now supports an optionnal level name (info, notice, err ...) above |
| which nothing is sent. |
| - replaced some strncmp() with memcmp() for better efficiency. |
| - added "capture cookie" option which logs client and/or server cookies |
| - cleaned up/down messages and dump servers states upon SIGHUP |
| - added a redirection feature for errors : "errorloc <errnum> <url>" |
| - now we won't insist on connecting to a dead server, even with a cookie, |
| unless option "persist" is specified. |
| - added HTTP/408 response for client request time-out and HTTP/50[234] for |
| server reply time-out or errors. |
| |
| 2002/09/01 : 1.1.16 |
| - implement HTTP health checks when option "httpchk" is specified. |
| |
| 2002/08/07 : 1.1.15 |
| - replaced setpgid()/setpgrp() with setsid() for better portability, because |
| setpgrp() doesn't have the same meaning under Solaris, Linux, and OpenBSD. |
| |
| 2002/07/20 : 1.1.14 |
| - added "postonly" cookie mode |
| |
| 2002/07/15 : 1.1.13 |
| - tv_diff used inverted parameters which led to negative times ! |
| |
| 2002/07/13 : 1.1.12 |
| - fixed stats monitoring, and optimized some tv_* for most common cases. |
| - replaced temporary 'newhdr' with 'trash' to reduce stack size |
| - made HTTP errors more HTML-fiendly. |
| - renamed strlcpy() to strlcpy2() because of a slightly difference between |
| their behaviour (return value), to avoid confusion. |
| - restricted HTTP messages to HTTP proxies only |
| - added a 502 message when the connection has been refused by the server, |
| to prevent clients from believing this is a zero-byte HTTP 0.9 reply. |
| - changed 'Cache-control:' from 'no-cache="set-cookie"' to 'private' when |
| inserting a cookie, because some caches (apache) don't understand it. |
| - fixed processing of server headers when client is in SHUTR state |
| |
| 2002/07/04 : |
| - automatically close fd's 0,1 and 2 when going daemon ; setpgrp() after |
| setpgid() |
| |
| 2002/06/04 : 1.1.11 |
| - fixed multi-cookie handling in client request to allow clean deletion |
| in insert+indirect mode. Now, only the server cookie is deleted and not |
| all the header. Should now be compliant to RFC2965. |
| - added a "nocache" option to "cookie" to specify that we explicitly want |
| to add a "cache-control" header when we add a cookie. |
| It is also possible to add an "Expires: <old-date>" to keep compatibility |
| with old/broken caches. |
| |
| 2002/05/10 : 1.1.10 |
| - if a cookie is used in insert+indirect mode, it's desirable that the |
| the servers don't see it. It was not possible to remove it correctly |
| with regexps, so now it's removed automatically. |
| |
| 2002/04/19 : 1.1.9 |
| - don't use snprintf()'s return value as an end of message since it may |
| be larger. This caused bus errors and segfaults in internal libc's |
| getenv() during localtime() in send_log(). |
| - removed dead insecure send_syslog() function and all references to it. |
| - fixed warnings on Solaris due to buggy implementation of isXXXX(). |
| |
| 2002/04/18 : 1.1.8 |
| - option "dontlognull" |
| - fixed "double space" bug in config parser |
| - fixed an uninitialized server field in case of dispatch |
| with no existing server which could cause a segfault during |
| logging. |
| - the pid logged was always the father's, which was wrong for daemons. |
| - fixed wrong level "LOG_INFO" for message "proxy started". |
| |
| 2002/04/13 : |
| - http logging is now complete : |
| - ip:port, date, proxy, server |
| - req_time, conn_time, hdr_time, tot_time |
| - status, size, request |
| - source address |
| |
| 2002/04/12 : 1.1.7 |
| - added option forwardfor |
| - added reqirep, reqidel, reqiallow, reqideny, rspirep, rspidel |
| - added "log global" in "listen" section. |
| |
| 2002/04/09 : |
| - added a new "global" section : |
| - logs |
| - debug, quiet, daemon modes |
| - uid, gid, chroot, nbproc, maxconn |
| |
| 2002/04/08 : 1.1.6 |
| - regex are now chained and not limited anymore. |
| - unavailable server now returns HTTP/502. |
| - increased per-line args limit to 40 |
| - added reqallow/reqdeny to block some request on matches |
| - added HTTP 400/403 responses |
| |
| 2002/04/03 : 1.1.5 |
| - connection logging displayed incorrect source address. |
| - added proxy start/stop and server up/down log events. |
| - replaced log message short buffers with larger trash. |
| - enlarged buffer to 8 kB and replace buffer to 4 kB. |
| |
| 2002/03/25 : 1.1.4 |
| - made rise/fall/interval time configurable |
| |
| 2002/03/22 : 1.1.3 |
| - fixed a bug : cr_expire and cw_expire were inverted in CL_STSHUT[WR] |
| which could lead to loops. |
| |
| 2002/03/21 : 1.1.2 |
| - fixed a bug in buffer management where we could have a loop |
| between event_read() and process_{cli|srv} if R==BUFSIZE-MAXREWRITE. |
| => implemented an adjustable buffer limit. |
| - fixed a bug : expiration of tasks in wait queue timeout is used again, |
| and running tasks are skipped. |
| - added some debug lines for accept events. |
| - send warnings for servers up/down. |
| |
| 2002/03/12 : 1.1.1 |
| - fixed a bug in total failure handling |
| - fixed a bug in timestamp comparison within same second (tv_cmp_ms) |
| |
| 2002/03/10 : 1.1.0 |
| - fixed a few timeout bugs |
| - rearranged the task scheduler subsystem to improve performance, |
| add new tasks, and make it easier to later port to librt ; |
| - allow multiple accept() for one select() wake up ; |
| - implemented internal load balancing with basic health-check ; |
| - cookie insertion and header add/replace/delete, with better strings |
| support. |
| |
| 2002/03/08 |
| - reworked buffer handling to fix a few rewrite bugs, and |
| improve overall performance. |
| - implement the "purge" option to delete server cookies in direct mode. |
| |
| 2002/03/07 |
| - fixed some error cases where the maxfd was not decreased. |
| |
| 2002/02/26 |
| - now supports transparent proxying, at least on linux 2.4. |
| |
| 2002/02/12 |
| - soft stop works again (fixed select timeout computation). |
| - it seems that TCP proxies sometimes cannot timeout. |
| - added a "quiet" mode. |
| - enforce file descriptor limitation on socket() and accept(). |
| |
| 2001/12/30 : release of version 1.0.2 : fixed a bug in header processing |
| 2001/12/19 : release of version 1.0.1 : no MSG_NOSIGNAL on solaris |
| 2001/12/16 : release of version 1.0.0. |
| 2001/12/16 : added syslog capability for each accepted connection. |
| 2001/11/19 : corrected premature end of files and occasional SIGPIPE. |
| 2001/10/31 : added health-check type servers (mode health) which replies OK then closes. |
| 2001/10/30 : added the ability to support standard TCP proxies and HTTP proxies |
| with or without cookies (use keyword http for this). |
| 2001/09/01 : added client/server header replacing with regexps. |
| eg: |
| cliexp ^(Host:\ [^:]*).* Host:\ \1:80 |
| srvexp ^Server:\ .* Server:\ Apache |
| 2000/11/29 : first fully working release with complete FSMs and timeouts. |
| 2000/11/28 : major rewrite |
| 2000/11/26 : first write |