| /* |
| * Bandwidth limitation filter. |
| * |
| * Copyright 2022 HAProxy Technologies, Christopher Faulet <cfaulet@haproxy.com> |
| * |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| |
| #include <ctype.h> |
| |
| #include <haproxy/api.h> |
| #include <haproxy/channel-t.h> |
| #include <haproxy/filters.h> |
| #include <haproxy/global.h> |
| #include <haproxy/http_ana-t.h> |
| #include <haproxy/http_rules.h> |
| #include <haproxy/proxy.h> |
| #include <haproxy/sample.h> |
| #include <haproxy/stream.h> |
| #include <haproxy/tcp_rules.h> |
| #include <haproxy/time.h> |
| #include <haproxy/tools.h> |
| |
| const char *bwlim_flt_id = "bandwidth limitation filter"; |
| |
| struct flt_ops bwlim_ops; |
| |
| #define BWLIM_FL_NONE 0x00000000 /* For init purposr */ |
| #define BWLIM_FL_IN 0x00000001 /* Limit clients uploads */ |
| #define BWLIM_FL_OUT 0x00000002 /* Limit clients downloads */ |
| #define BWLIM_FL_SHARED 0x00000004 /* Limit shared between clients (using stick-tables) */ |
| |
| #define BWLIM_ACT_LIMIT_EXPR 0x00000001 |
| #define BWLIM_ACT_LIMIT_CONST 0x00000002 |
| #define BWLIM_ACT_PERIOD_EXPR 0x00000004 |
| #define BWLIM_ACT_PERIOD_CONST 0x00000008 |
| |
| struct bwlim_config { |
| struct proxy *proxy; |
| char *name; |
| unsigned int flags; |
| struct sample_expr *expr; |
| union { |
| char *n; |
| struct stktable *t; |
| } table; |
| unsigned int period; |
| unsigned int limit; |
| unsigned int min_size; |
| }; |
| |
| struct bwlim_state { |
| struct freq_ctr bytes_rate; |
| struct stksess *ts; |
| struct act_rule *rule; |
| unsigned int limit; |
| unsigned int period; |
| unsigned int exp; |
| }; |
| |
| |
| /* Pools used to allocate comp_state structs */ |
| DECLARE_STATIC_POOL(pool_head_bwlim_state, "bwlim_state", sizeof(struct bwlim_state)); |
| |
| |
| /* Apply the bandwidth limitation of the filter <filter>. <len> is the maximum |
| * amount of data that the filter can forward. This function applies the |
| * limitation and returns what the stream is authorized to forward. Several |
| * limitation can be stacked. |
| */ |
| static int bwlim_apply_limit(struct filter *filter, struct channel *chn, unsigned int len) |
| { |
| struct bwlim_config *conf = FLT_CONF(filter); |
| struct bwlim_state *st = filter->ctx; |
| struct freq_ctr *bytes_rate; |
| unsigned int period, limit, remain, tokens, users; |
| unsigned int wait = 0; |
| int overshoot, ret = 0; |
| |
| /* Don't forward anything if there is nothing to forward or the waiting |
| * time is not expired |
| */ |
| if (!len || (tick_isset(st->exp) && !tick_is_expired(st->exp, now_ms))) |
| goto end; |
| |
| st->exp = TICK_ETERNITY; |
| ret = len; |
| if (conf->flags & BWLIM_FL_SHARED) { |
| void *ptr; |
| unsigned int type = ((conf->flags & BWLIM_FL_IN) ? STKTABLE_DT_BYTES_IN_RATE : STKTABLE_DT_BYTES_OUT_RATE); |
| |
| /* In shared mode, get a pointer on the stick table entry. it |
| * will be used to get the freq-counter. It is also used to get |
| * The number of users. |
| */ |
| ptr = stktable_data_ptr(conf->table.t, st->ts, type); |
| if (!ptr) |
| goto end; |
| |
| HA_RWLOCK_WRLOCK(STK_SESS_LOCK, &st->ts->lock); |
| bytes_rate = &stktable_data_cast(ptr, std_t_frqp); |
| period = conf->table.t->data_arg[type].u; |
| limit = conf->limit; |
| users = st->ts->ref_cnt; |
| } |
| else { |
| /* On per-stream mode, the freq-counter is private to the |
| * stream. Get it from the filter state. Rely on the custom |
| * limit/period if defined or use the default ones. In this mode, |
| * there is only one user. |
| */ |
| bytes_rate = &st->bytes_rate; |
| period = (st->period ? st->period : conf->period); |
| limit = (st->limit ? st->limit : conf->limit); |
| users = 1; |
| } |
| |
| /* Be sure the current rate does not exceed the limit over the current |
| * period. In this case, nothing is forwarded and the waiting time is |
| * computed to be sure to not retry too early. |
| * |
| * The test is used to avoid the initial burst. Otherwise, streams will |
| * consume the limit as fast as possible and will then be paused for |
| * long time. |
| */ |
| overshoot = freq_ctr_overshoot_period(bytes_rate, period, limit); |
| if (overshoot > 0) { |
| if (conf->flags & BWLIM_FL_SHARED) |
| HA_RWLOCK_WRUNLOCK(STK_SESS_LOCK, &st->ts->lock); |
| wait = div64_32((uint64_t)(conf->min_size + overshoot) * period * users, |
| limit); |
| st->exp = tick_add(now_ms, (wait ? wait : 1)); |
| ret = 0; |
| goto end; |
| } |
| |
| /* Get the allowed quota per user. */ |
| remain = freq_ctr_remain_period(bytes_rate, period, limit, 0); |
| tokens = div64_32((uint64_t)(remain + users - 1), users); |
| |
| if (tokens < len) { |
| /* The stream cannot forward all its data. But we will check if |
| * it can perform a small burst if the global quota is large |
| * enough. But, in this case, its waiting time will be |
| * increased accordingly. |
| */ |
| ret = tokens; |
| if (tokens < conf->min_size) { |
| ret = (chn_prod(chn)->flags & (SC_FL_EOI|SC_FL_EOS|SC_FL_ABRT_DONE)) |
| ? MIN(len, conf->min_size) |
| : conf->min_size; |
| |
| if (ret <= remain) |
| wait = div64_32((uint64_t)(ret - tokens) * period * users + limit - 1, limit); |
| else |
| ret = (limit < ret) ? remain : 0; |
| } |
| } |
| |
| /* At the end, update the freq-counter and compute the waiting time if |
| * the stream is limited |
| */ |
| update_freq_ctr_period(bytes_rate, period, ret); |
| if (ret < len) { |
| wait += next_event_delay_period(bytes_rate, period, limit, MIN(len - ret, conf->min_size * users)); |
| st->exp = tick_add(now_ms, (wait ? wait : 1)); |
| } |
| |
| if (conf->flags & BWLIM_FL_SHARED) |
| HA_RWLOCK_WRUNLOCK(STK_SESS_LOCK, &st->ts->lock); |
| |
| end: |
| chn->analyse_exp = tick_first((tick_is_expired(chn->analyse_exp, now_ms) ? TICK_ETERNITY : chn->analyse_exp), |
| st->exp); |
| return ret; |
| } |
| |
| /*************************************************************************** |
| * Hooks that manage the filter lifecycle (init/check/deinit) |
| **************************************************************************/ |
| /* Initialize the filter. Returns -1 on error, else 0. */ |
| static int bwlim_init(struct proxy *px, struct flt_conf *fconf) |
| { |
| fconf->flags |= FLT_CFG_FL_HTX; |
| return 0; |
| } |
| |
| /* Free resources allocated by the bwlim filter. */ |
| static void bwlim_deinit(struct proxy *px, struct flt_conf *fconf) |
| { |
| struct bwlim_config *conf = fconf->conf; |
| |
| if (conf) { |
| ha_free(&conf->name); |
| release_sample_expr(conf->expr); |
| conf->expr = NULL; |
| ha_free(&fconf->conf); |
| } |
| } |
| |
| /* Check configuration of a bwlim filter for a specified proxy. |
| * Return 1 on error, else 0. */ |
| static int bwlim_check(struct proxy *px, struct flt_conf *fconf) |
| { |
| struct bwlim_config *conf = fconf->conf; |
| struct stktable *target; |
| |
| if (!(conf->flags & BWLIM_FL_SHARED)) |
| return 0; |
| |
| if (conf->table.n) |
| target = stktable_find_by_name(conf->table.n); |
| else |
| target = px->table; |
| |
| if (!target) { |
| ha_alert("Proxy %s : unable to find table '%s' referenced by bwlim filter '%s'", |
| px->id, conf->table.n ? conf->table.n : px->id, conf->name); |
| return 1; |
| } |
| |
| if ((conf->flags & BWLIM_FL_IN) && !target->data_ofs[STKTABLE_DT_BYTES_IN_RATE]) { |
| ha_alert("Proxy %s : stick-table '%s' uses a data type incompatible with bwlim filter '%s'." |
| " It must be 'bytes_in_rate'", |
| px->id, conf->table.n ? conf->table.n : px->id, conf->name); |
| return 1; |
| } |
| else if ((conf->flags & BWLIM_FL_OUT) && !target->data_ofs[STKTABLE_DT_BYTES_OUT_RATE]) { |
| ha_alert("Proxy %s : stick-table '%s' uses a data type incompatible with bwlim filter '%s'." |
| " It must be 'bytes_out_rate'", |
| px->id, conf->table.n ? conf->table.n : px->id, conf->name); |
| return 1; |
| } |
| |
| if (!stktable_compatible_sample(conf->expr, target->type)) { |
| ha_alert("Proxy %s : stick-table '%s' uses a key type incompatible with bwlim filter '%s'", |
| px->id, conf->table.n ? conf->table.n : px->id, conf->name); |
| return 1; |
| } |
| else { |
| if (!in_proxies_list(target->proxies_list, px)) { |
| px->next_stkt_ref = target->proxies_list; |
| target->proxies_list = px; |
| } |
| ha_free(&conf->table.n); |
| conf->table.t = target; |
| } |
| |
| return 0; |
| } |
| |
| /************************************************************************** |
| * Hooks to handle start/stop of streams |
| *************************************************************************/ |
| /* Called when a filter instance is created and attach to a stream */ |
| static int bwlim_attach(struct stream *s, struct filter *filter) |
| { |
| struct bwlim_state *st; |
| |
| st = pool_zalloc(pool_head_bwlim_state); |
| if (!st) |
| return -1; |
| filter->ctx = st; |
| return 1; |
| } |
| |
| /* Called when a filter instance is detach from a stream, just before its |
| * destruction */ |
| static void bwlim_detach(struct stream *s, struct filter *filter) |
| { |
| struct bwlim_config *conf = FLT_CONF(filter); |
| struct bwlim_state *st = filter->ctx; |
| struct stktable *t = conf->table.t; |
| |
| if (!st) |
| return; |
| |
| if (st->ts) |
| stktable_touch_local(t, st->ts, 1); |
| |
| /* release any possible compression context */ |
| pool_free(pool_head_bwlim_state, st); |
| filter->ctx = NULL; |
| } |
| |
| /************************************************************************** |
| * Hooks to handle channels activity |
| *************************************************************************/ |
| |
| /* Called when analyze ends for a given channel */ |
| static int bwlim_chn_end_analyze(struct stream *s, struct filter *filter, struct channel *chn) |
| { |
| chn->analyse_exp = TICK_ETERNITY; |
| return 1; |
| } |
| |
| |
| /************************************************************************** |
| * Hooks to filter HTTP messages |
| *************************************************************************/ |
| static int bwlim_http_headers(struct stream *s, struct filter *filter, struct http_msg *msg) |
| { |
| msg->chn->analyse_exp = TICK_ETERNITY; |
| return 1; |
| } |
| |
| static int bwlim_http_payload(struct stream *s, struct filter *filter, struct http_msg *msg, |
| unsigned int offset, unsigned int len) |
| { |
| return bwlim_apply_limit(filter, msg->chn, len); |
| } |
| |
| /************************************************************************** |
| * Hooks to filter TCP data |
| *************************************************************************/ |
| static int bwlim_tcp_payload(struct stream *s, struct filter *filter, struct channel *chn, |
| unsigned int offset, unsigned int len) |
| { |
| return bwlim_apply_limit(filter, chn, len); |
| } |
| |
| /******************************************************************** |
| * Functions that manage the filter initialization |
| ********************************************************************/ |
| struct flt_ops bwlim_ops = { |
| /* Manage bwlim filter, called for each filter declaration */ |
| .init = bwlim_init, |
| .deinit = bwlim_deinit, |
| .check = bwlim_check, |
| |
| /* Handle start/stop of streams */ |
| .attach = bwlim_attach, |
| .detach = bwlim_detach, |
| |
| /* Handle channels activity */ |
| .channel_end_analyze = bwlim_chn_end_analyze, |
| |
| /* Filter HTTP requests and responses */ |
| .http_headers = bwlim_http_headers, |
| .http_payload = bwlim_http_payload, |
| |
| /* Filter TCP data */ |
| .tcp_payload = bwlim_tcp_payload, |
| }; |
| |
| /* Set a bandwidth limitation. It always return ACT_RET_CONT. On error, the rule |
| * is ignored. First of all, it looks for the corresponding filter. Then, for a |
| * shared limitation, the stick-table entry is retrieved. For a per-stream |
| * limitation, the custom limit and period are computed, if necessary. At the |
| * end, the filter is registered on the data filtering for the right channel |
| * (bwlim-in = request, bwlim-out = response). |
| */ |
| static enum act_return bwlim_set_limit(struct act_rule *rule, struct proxy *px, |
| struct session *sess, struct stream *s, int flags) |
| { |
| struct bwlim_config *conf = rule->arg.act.p[3]; |
| struct filter *filter; |
| struct bwlim_state *st = NULL; |
| struct stktable *t; |
| struct stktable_key *key; |
| struct stksess *ts; |
| int opt; |
| |
| list_for_each_entry(filter, &s->strm_flt.filters, list) { |
| if (FLT_ID(filter) == bwlim_flt_id && FLT_CONF(filter) == conf) { |
| st = filter->ctx; |
| break; |
| } |
| } |
| |
| if (!st) |
| goto end; |
| |
| switch (rule->from) { |
| case ACT_F_TCP_REQ_CNT: opt = SMP_OPT_DIR_REQ | SMP_OPT_FINAL; break; |
| case ACT_F_TCP_RES_CNT: opt = SMP_OPT_DIR_RES | SMP_OPT_FINAL; break; |
| case ACT_F_HTTP_REQ: opt = SMP_OPT_DIR_REQ | SMP_OPT_FINAL; break; |
| case ACT_F_HTTP_RES: opt = SMP_OPT_DIR_RES | SMP_OPT_FINAL; break; |
| default: |
| goto end; |
| } |
| |
| if (conf->flags & BWLIM_FL_SHARED) { |
| t = conf->table.t; |
| key = stktable_fetch_key(t, px, sess, s, opt, conf->expr, NULL); |
| if (!key) |
| goto end; |
| |
| ts = stktable_get_entry(t, key); |
| if (!ts) |
| goto end; |
| |
| st->ts = ts; |
| st->rule = rule; |
| } |
| else { |
| struct sample *smp; |
| |
| st->limit = 0; |
| st->period = 0; |
| if (rule->action & BWLIM_ACT_LIMIT_EXPR) { |
| smp = sample_fetch_as_type(px, sess, s, opt, rule->arg.act.p[1], SMP_T_SINT); |
| if (smp && smp->data.u.sint > 0) |
| st->limit = smp->data.u.sint; |
| } |
| else if (rule->action & BWLIM_ACT_LIMIT_CONST) |
| st->limit = (uintptr_t)rule->arg.act.p[1]; |
| |
| if (rule->action & BWLIM_ACT_PERIOD_EXPR) { |
| smp = sample_fetch_as_type(px, sess, s, opt, rule->arg.act.p[2], SMP_T_SINT); |
| if (smp && smp->data.u.sint > 0) |
| st->period = smp->data.u.sint; |
| } |
| else if (rule->action & BWLIM_ACT_PERIOD_CONST) |
| st->period = (uintptr_t)rule->arg.act.p[2]; |
| } |
| |
| st->exp = TICK_ETERNITY; |
| if (conf->flags & BWLIM_FL_IN) |
| register_data_filter(s, &s->req, filter); |
| else |
| register_data_filter(s, &s->res, filter); |
| |
| end: |
| return ACT_RET_CONT; |
| } |
| |
| /* Check function for "set-bandwidth-limit" aciton. It returns 1 on |
| * success. Otherwise, it returns 0 and <err> is filled. |
| */ |
| int check_bwlim_action(struct act_rule *rule, struct proxy *px, char **err) |
| { |
| struct flt_conf *fconf; |
| struct bwlim_config *conf = NULL; |
| unsigned int where; |
| |
| list_for_each_entry(fconf, &px->filter_configs, list) { |
| conf = NULL; |
| if (fconf->id == bwlim_flt_id) { |
| conf = fconf->conf; |
| if (strcmp(rule->arg.act.p[0], conf->name) == 0) |
| break; |
| } |
| } |
| if (!conf) { |
| memprintf(err, "unable to find bwlim filter '%s' referenced by set-bandwidth-limit rule", |
| (char *)rule->arg.act.p[0]); |
| return 0; |
| } |
| |
| if ((conf->flags & BWLIM_FL_SHARED) && rule->arg.act.p[1]) { |
| memprintf(err, "set-bandwidth-limit rule cannot define a limit for a shared bwlim filter"); |
| return 0; |
| } |
| |
| if ((conf->flags & BWLIM_FL_SHARED) && rule->arg.act.p[2]) { |
| memprintf(err, "set-bandwidth-limit rule cannot define a period for a shared bwlim filter"); |
| return 0; |
| } |
| |
| where = 0; |
| if (px->cap & PR_CAP_FE) { |
| if (rule->from == ACT_F_TCP_REQ_CNT) |
| where |= SMP_VAL_FE_REQ_CNT; |
| else if (rule->from == ACT_F_HTTP_REQ) |
| where |= SMP_VAL_FE_HRQ_HDR; |
| else if (rule->from == ACT_F_TCP_RES_CNT) |
| where |= SMP_VAL_FE_RES_CNT; |
| else if (rule->from == ACT_F_HTTP_RES) |
| where |= SMP_VAL_FE_HRS_HDR; |
| } |
| if (px->cap & PR_CAP_BE) { |
| if (rule->from == ACT_F_TCP_REQ_CNT) |
| where |= SMP_VAL_BE_REQ_CNT; |
| else if (rule->from == ACT_F_HTTP_REQ) |
| where |= SMP_VAL_BE_HRQ_HDR; |
| else if (rule->from == ACT_F_TCP_RES_CNT) |
| where |= SMP_VAL_BE_RES_CNT; |
| else if (rule->from == ACT_F_HTTP_RES) |
| where |= SMP_VAL_BE_HRS_HDR; |
| } |
| |
| if ((rule->action & BWLIM_ACT_LIMIT_EXPR) && rule->arg.act.p[1]) { |
| struct sample_expr *expr = rule->arg.act.p[1]; |
| |
| if (!(expr->fetch->val & where)) { |
| memprintf(err, "set-bandwidth-limit rule uses a limit extracting information from '%s', none of which is available here", |
| sample_src_names(expr->fetch->use)); |
| return 0; |
| } |
| |
| if (rule->from == ACT_F_TCP_REQ_CNT && (px->cap & PR_CAP_FE)) { |
| if (!px->tcp_req.inspect_delay && !(expr->fetch->val & SMP_VAL_FE_SES_ACC)) { |
| ha_warning("%s '%s' : a 'tcp-request content set-bandwidth-limit*' rule explicitly depending on request" |
| " contents without any 'tcp-request inspect-delay' setting." |
| " This means that this rule will randomly find its contents. This can be fixed by" |
| " setting the tcp-request inspect-delay.\n", |
| proxy_type_str(px), px->id); |
| } |
| } |
| if (rule->from == ACT_F_TCP_RES_CNT && (px->cap & PR_CAP_BE)) { |
| if (!px->tcp_rep.inspect_delay && !(expr->fetch->val & SMP_VAL_BE_SRV_CON)) { |
| ha_warning("%s '%s' : a 'tcp-response content set-bandwidth-limit*' rule explicitly depending on response" |
| " contents without any 'tcp-response inspect-delay' setting." |
| " This means that this rule will randomly find its contents. This can be fixed by" |
| " setting the tcp-response inspect-delay.\n", |
| proxy_type_str(px), px->id); |
| } |
| } |
| } |
| |
| if ((rule->action & BWLIM_ACT_PERIOD_EXPR) && rule->arg.act.p[2]) { |
| struct sample_expr *expr = rule->arg.act.p[2]; |
| |
| if (!(expr->fetch->val & where)) { |
| memprintf(err, "set-bandwidth-limit rule uses a period extracting information from '%s', none of which is available here", |
| sample_src_names(expr->fetch->use)); |
| return 0; |
| } |
| |
| if (rule->from == ACT_F_TCP_REQ_CNT && (px->cap & PR_CAP_FE)) { |
| if (!px->tcp_req.inspect_delay && !(expr->fetch->val & SMP_VAL_FE_SES_ACC)) { |
| ha_warning("%s '%s' : a 'tcp-request content set-bandwidth-limit*' rule explicitly depending on request" |
| " contents without any 'tcp-request inspect-delay' setting." |
| " This means that this rule will randomly find its contents. This can be fixed by" |
| " setting the tcp-request inspect-delay.\n", |
| proxy_type_str(px), px->id); |
| } |
| } |
| if (rule->from == ACT_F_TCP_RES_CNT && (px->cap & PR_CAP_BE)) { |
| if (!px->tcp_rep.inspect_delay && !(expr->fetch->val & SMP_VAL_BE_SRV_CON)) { |
| ha_warning("%s '%s' : a 'tcp-response content set-bandwidth-limit*' rule explicitly depending on response" |
| " contents without any 'tcp-response inspect-delay' setting." |
| " This means that this rule will randomly find its contents. This can be fixed by" |
| " setting the tcp-response inspect-delay.\n", |
| proxy_type_str(px), px->id); |
| } |
| } |
| } |
| |
| if (conf->expr) { |
| if (!(conf->expr->fetch->val & where)) { |
| memprintf(err, "bwlim filter '%s uses a key extracting information from '%s', none of which is available here", |
| conf->name, sample_src_names(conf->expr->fetch->use)); |
| return 0; |
| } |
| |
| if (rule->from == ACT_F_TCP_REQ_CNT && (px->cap & PR_CAP_FE)) { |
| if (!px->tcp_req.inspect_delay && !(conf->expr->fetch->val & SMP_VAL_FE_SES_ACC)) { |
| ha_warning("%s '%s' : a 'tcp-request content set-bandwidth-limit*' rule explicitly depending on request" |
| " contents without any 'tcp-request inspect-delay' setting." |
| " This means that this rule will randomly find its contents. This can be fixed by" |
| " setting the tcp-request inspect-delay.\n", |
| proxy_type_str(px), px->id); |
| } |
| } |
| if (rule->from == ACT_F_TCP_RES_CNT && (px->cap & PR_CAP_BE)) { |
| if (!px->tcp_rep.inspect_delay && !(conf->expr->fetch->val & SMP_VAL_BE_SRV_CON)) { |
| ha_warning("%s '%s' : a 'tcp-response content set-bandwidth-limit*' rule explicitly depending on response" |
| " contents without any 'tcp-response inspect-delay' setting." |
| " This means that this rule will randomly find its contents. This can be fixed by" |
| " setting the tcp-response inspect-delay.\n", |
| proxy_type_str(px), px->id); |
| } |
| } |
| } |
| |
| end: |
| rule->arg.act.p[3] = conf; |
| return 1; |
| } |
| |
| /* Release memory allocated by "set-bandwidth-limit" action. */ |
| static void release_bwlim_action(struct act_rule *rule) |
| { |
| ha_free(&rule->arg.act.p[0]); |
| if ((rule->action & BWLIM_ACT_LIMIT_EXPR) && rule->arg.act.p[1]) { |
| release_sample_expr(rule->arg.act.p[1]); |
| rule->arg.act.p[1] = NULL; |
| } |
| if ((rule->action & BWLIM_ACT_PERIOD_EXPR) && rule->arg.act.p[2]) { |
| release_sample_expr(rule->arg.act.p[2]); |
| rule->arg.act.p[2] = NULL; |
| } |
| rule->arg.act.p[3] = NULL; /* points on the filter's config */ |
| } |
| |
| /* Parse "set-bandwidth-limit" action. The filter name must be specified. For |
| * shared limitations, there is no other supported parameter. For per-stream |
| * limitations, a custom limit and period may be specified. In both case, it |
| * must be an expression. On success: |
| * |
| * arg.act.p[0] will be the filter name (mandatory) |
| * arg.act.p[1] will be an expression for the custom limit (optional, may be NULL) |
| * arg.act.p[2] will be an expression for the custom period (optional, may be NULL) |
| * |
| * It returns ACT_RET_PRS_OK on success, ACT_RET_PRS_ERR on error. |
| */ |
| static enum act_parse_ret parse_bandwidth_limit(const char **args, int *orig_arg, struct proxy *px, |
| struct act_rule *rule, char **err) |
| { |
| struct sample_expr *expr; |
| int cur_arg; |
| |
| cur_arg = *orig_arg; |
| |
| if (!*args[cur_arg]) { |
| memprintf(err, "missing bwlim filter name"); |
| return ACT_RET_PRS_ERR; |
| } |
| |
| rule->arg.act.p[0] = strdup(args[cur_arg]); |
| if (!rule->arg.act.p[0]) { |
| memprintf(err, "out of memory"); |
| return ACT_RET_PRS_ERR; |
| } |
| cur_arg++; |
| |
| while (1) { |
| if (strcmp(args[cur_arg], "limit") == 0) { |
| const char *res; |
| unsigned int limit; |
| |
| cur_arg++; |
| if (!args[cur_arg]) { |
| memprintf(err, "missing limit value or expression"); |
| goto error; |
| } |
| |
| res = parse_size_err(args[cur_arg], &limit); |
| if (!res) { |
| rule->action |= BWLIM_ACT_LIMIT_CONST; |
| rule->arg.act.p[1] = (void *)(uintptr_t)limit; |
| cur_arg++; |
| continue; |
| } |
| |
| expr = sample_parse_expr((char **)args, &cur_arg, px->conf.args.file, px->conf.args.line, NULL, &px->conf.args, NULL); |
| if (!expr) { |
| memprintf(err, "'%s': invalid size value or unknown fetch method '%s'", args[cur_arg-1], args[cur_arg]); |
| goto error; |
| } |
| rule->action |= BWLIM_ACT_LIMIT_EXPR; |
| rule->arg.act.p[1] = expr; |
| } |
| else if (strcmp(args[cur_arg], "period") == 0) { |
| const char *res; |
| unsigned int period; |
| |
| cur_arg++; |
| if (!args[cur_arg]) { |
| memprintf(err, "missing period value or expression"); |
| goto error; |
| } |
| |
| res = parse_time_err(args[cur_arg], &period, TIME_UNIT_MS); |
| if (!res) { |
| rule->action |= BWLIM_ACT_PERIOD_CONST; |
| rule->arg.act.p[2] = (void *)(uintptr_t)period; |
| cur_arg++; |
| continue; |
| } |
| |
| expr = sample_parse_expr((char **)args, &cur_arg, px->conf.args.file, px->conf.args.line, NULL, &px->conf.args, NULL); |
| if (!expr) { |
| memprintf(err, "'%s': invalid time value or unknown fetch method '%s'", args[cur_arg-1], args[cur_arg]); |
| goto error; |
| } |
| rule->action |= BWLIM_ACT_PERIOD_EXPR; |
| rule->arg.act.p[2] = expr; |
| } |
| else |
| break; |
| } |
| |
| rule->action_ptr = bwlim_set_limit; |
| rule->check_ptr = check_bwlim_action; |
| rule->release_ptr = release_bwlim_action; |
| |
| *orig_arg = cur_arg; |
| return ACT_RET_PRS_OK; |
| |
| error: |
| release_bwlim_action(rule); |
| return ACT_RET_PRS_ERR; |
| } |
| |
| |
| static struct action_kw_list tcp_req_cont_actions = { |
| .kw = { |
| { "set-bandwidth-limit", parse_bandwidth_limit, 0 }, |
| { NULL, NULL } |
| } |
| }; |
| |
| static struct action_kw_list tcp_res_cont_actions = { |
| .kw = { |
| { "set-bandwidth-limit", parse_bandwidth_limit, 0 }, |
| { NULL, NULL } |
| } |
| }; |
| |
| static struct action_kw_list http_req_actions = { |
| .kw = { |
| { "set-bandwidth-limit", parse_bandwidth_limit, 0 }, |
| { NULL, NULL } |
| } |
| }; |
| |
| static struct action_kw_list http_res_actions = { |
| .kw = { |
| { "set-bandwidth-limit", parse_bandwidth_limit, 0 }, |
| { NULL, NULL } |
| } |
| }; |
| |
| INITCALL1(STG_REGISTER, tcp_req_cont_keywords_register, &tcp_req_cont_actions); |
| INITCALL1(STG_REGISTER, tcp_res_cont_keywords_register, &tcp_res_cont_actions); |
| INITCALL1(STG_REGISTER, http_req_keywords_register, &http_req_actions); |
| INITCALL1(STG_REGISTER, http_res_keywords_register, &http_res_actions); |
| |
| |
| /* Generic function to parse bandwidth limitation filter configurartion. It |
| * Returns -1 on error and 0 on success. It handles configuration for per-stream |
| * and shared limitations. |
| */ |
| static int parse_bwlim_flt(char **args, int *cur_arg, struct proxy *px, struct flt_conf *fconf, |
| char **err, void *private) |
| { |
| struct flt_conf *fc; |
| struct bwlim_config *conf; |
| int shared, per_stream; |
| int pos = *cur_arg + 1; |
| |
| conf = calloc(1, sizeof(*conf)); |
| if (!conf) { |
| memprintf(err, "%s: out of memory", args[*cur_arg]); |
| return -1; |
| } |
| conf->proxy = px; |
| |
| if (!*args[pos]) { |
| memprintf(err, "'%s' : a name is expected as first argument ", args[*cur_arg]); |
| goto error; |
| } |
| conf->flags = BWLIM_FL_NONE; |
| conf->name = strdup(args[pos]); |
| if (!conf->name) { |
| memprintf(err, "%s: out of memory", args[*cur_arg]); |
| goto error; |
| } |
| |
| list_for_each_entry(fc, &px->filter_configs, list) { |
| if (fc->id == bwlim_flt_id) { |
| struct bwlim_config *c = fc->conf; |
| |
| if (strcmp(conf->name, c->name) == 0) { |
| memprintf(err, "bwlim filter '%s' already declared for proxy '%s'\n", |
| conf->name, px->id); |
| goto error; |
| } |
| } |
| } |
| shared = per_stream = 0; |
| pos++; |
| while (*args[pos]) { |
| if (strcmp(args[pos], "key") == 0) { |
| if (per_stream) { |
| memprintf(err, "'%s' : cannot mix per-stream and shared parameter", |
| args[*cur_arg]); |
| goto error; |
| } |
| if (!*args[pos + 1]) { |
| memprintf(err, "'%s' : the sample expression is missing for '%s' option", |
| args[*cur_arg], args[pos]); |
| goto error; |
| } |
| shared = 1; |
| pos++; |
| conf->expr = sample_parse_expr((char **)args, &pos, px->conf.args.file, px->conf.args.line, |
| err, &px->conf.args, NULL); |
| if (!conf->expr) |
| goto error; |
| } |
| else if (strcmp(args[pos], "table") == 0) { |
| if (per_stream) { |
| memprintf(err, "'%s' : cannot mix per-stream and shared parameter", |
| args[*cur_arg]); |
| goto error; |
| } |
| if (!*args[pos + 1]) { |
| memprintf(err, "'%s' : the table name is missing for '%s' option", |
| args[*cur_arg], args[pos]); |
| goto error; |
| } |
| shared = 1; |
| conf->table.n = strdup(args[pos + 1]); |
| if (!conf->table.n) { |
| memprintf(err, "%s: out of memory", args[*cur_arg]); |
| goto error; |
| } |
| pos += 2; |
| } |
| else if (strcmp(args[pos], "default-period") == 0) { |
| const char *res; |
| |
| if (shared) { |
| memprintf(err, "'%s' : cannot mix per-stream and shared parameter", |
| args[*cur_arg]); |
| goto error; |
| } |
| if (!*args[pos + 1]) { |
| memprintf(err, "'%s' : the value is missing for '%s' option", |
| args[*cur_arg], args[pos]); |
| goto error; |
| } |
| per_stream = 1; |
| res = parse_time_err(args[pos + 1], &conf->period, TIME_UNIT_MS); |
| if (res) { |
| memprintf(err, "'%s' : invalid value for option '%s' (unexpected character '%c')", |
| args[*cur_arg], args[pos], *res); |
| goto error; |
| } |
| pos += 2; |
| } |
| else if (strcmp(args[pos], "limit") == 0) { |
| const char *res; |
| |
| if (per_stream) { |
| memprintf(err, "'%s' : cannot mix per-stream and shared parameter", |
| args[*cur_arg]); |
| goto error; |
| } |
| if (!*args[pos + 1]) { |
| memprintf(err, "'%s' : the value is missing for '%s' option", |
| args[*cur_arg], args[pos]); |
| goto error; |
| } |
| shared = 1; |
| res = parse_size_err(args[pos + 1], &conf->limit); |
| if (res) { |
| memprintf(err, "'%s' : invalid value for option '%s' (unexpected character '%c')", |
| args[*cur_arg], args[pos], *res); |
| goto error; |
| } |
| pos += 2; |
| } |
| else if (strcmp(args[pos], "default-limit") == 0) { |
| const char *res; |
| |
| if (shared) { |
| memprintf(err, "'%s' : cannot mix per-stream and shared parameter", |
| args[*cur_arg]); |
| goto error; |
| } |
| if (!*args[pos + 1]) { |
| memprintf(err, "'%s' : the value is missing for '%s' option", |
| args[*cur_arg], args[pos]); |
| goto error; |
| } |
| per_stream = 1; |
| res = parse_size_err(args[pos + 1], &conf->limit); |
| if (res) { |
| memprintf(err, "'%s' : invalid value for option '%s' (unexpected character '%c')", |
| args[*cur_arg], args[pos], *res); |
| goto error; |
| } |
| pos += 2; |
| } |
| else if (strcmp(args[pos], "min-size") == 0) { |
| const char *res; |
| |
| if (!*args[pos + 1]) { |
| memprintf(err, "'%s' : the value is missing for '%s' option", |
| args[*cur_arg], args[pos]); |
| goto error; |
| } |
| res = parse_size_err(args[pos + 1], &conf->min_size); |
| if (res) { |
| memprintf(err, "'%s' : invalid value for option '%s' (unexpected character '%c')", |
| args[*cur_arg], args[pos], *res); |
| goto error; |
| } |
| pos += 2; |
| } |
| else |
| break; |
| } |
| |
| if (shared) { |
| conf->flags |= BWLIM_FL_SHARED; |
| if (!conf->expr) { |
| memprintf(err, "'%s' : <key> option is missing", args[*cur_arg]); |
| goto error; |
| } |
| if (!conf->limit) { |
| memprintf(err, "'%s' : <limit> option is missing", args[*cur_arg]); |
| goto error; |
| } |
| } |
| else { |
| /* Per-stream: limit downloads only for now */ |
| conf->flags |= BWLIM_FL_OUT; |
| if (!conf->period) { |
| memprintf(err, "'%s' : <default-period> option is missing", args[*cur_arg]); |
| goto error; |
| } |
| if (!conf->limit) { |
| memprintf(err, "'%s' : <default-limit> option is missing", args[*cur_arg]); |
| goto error; |
| } |
| } |
| |
| *cur_arg = pos; |
| fconf->id = bwlim_flt_id; |
| fconf->ops = &bwlim_ops; |
| fconf->conf = conf; |
| return 0; |
| |
| error: |
| if (conf->name) |
| ha_free(&conf->name); |
| if (conf->expr) { |
| release_sample_expr(conf->expr); |
| conf->expr = NULL; |
| } |
| if (conf->table.n) |
| ha_free(&conf->table.n); |
| free(conf); |
| return -1; |
| } |
| |
| |
| static int parse_bwlim_in_flt(char **args, int *cur_arg, struct proxy *px, struct flt_conf *fconf, |
| char **err, void *private) |
| { |
| int ret; |
| |
| ret = parse_bwlim_flt(args, cur_arg, px, fconf, err, private); |
| if (!ret) { |
| struct bwlim_config *conf = fconf->conf; |
| |
| conf->flags |= BWLIM_FL_IN; |
| } |
| |
| return ret; |
| } |
| |
| static int parse_bwlim_out_flt(char **args, int *cur_arg, struct proxy *px, struct flt_conf *fconf, |
| char **err, void *private) |
| { |
| int ret; |
| |
| ret = parse_bwlim_flt(args, cur_arg, px, fconf, err, private); |
| if (!ret) { |
| struct bwlim_config *conf = fconf->conf; |
| |
| conf->flags |= BWLIM_FL_OUT; |
| } |
| return ret; |
| } |
| |
| /* Declare the filter parser for "trace" keyword */ |
| static struct flt_kw_list flt_kws = { "BWLIM", { }, { |
| { "bwlim-in", parse_bwlim_in_flt, NULL }, |
| { "bwlim-out", parse_bwlim_out_flt, NULL }, |
| { NULL, NULL, NULL }, |
| } |
| }; |
| |
| INITCALL1(STG_REGISTER, flt_register_keywords, &flt_kws); |