| # This GNU Makefile supports different OS and CPU combinations. |
| # |
| # You should use it this way : |
| # [g]make TARGET=os [ARCH=arch] [CPU=cpu] USE_xxx=1 ... |
| # |
| # When in doubt, invoke help, possibly with a known target : |
| # [g]make help |
| # [g]make help TARGET=linux-glibc |
| # |
| # By default the detailed commands are hidden for a cleaner output, but you may |
| # see them by appending "V=1" to the make command. |
| # |
| # Valid USE_* options are enumerated in the "use_opts" variable and are listed |
| # below. Most of them are automatically set by the TARGET, others have to be |
| # explicitly specified : |
| # USE_EPOLL : enable epoll() on Linux 2.6. Automatic. |
| # USE_KQUEUE : enable kqueue() on BSD. Automatic. |
| # USE_EVPORTS : enable event ports on SunOS systems. Automatic. |
| # USE_NETFILTER : enable netfilter on Linux. Automatic. |
| # USE_PCRE : enable use of libpcre for regex. Recommended. |
| # USE_PCRE_JIT : enable JIT for faster regex on libpcre >= 8.32 |
| # USE_PCRE2 : enable use of libpcre2 for regex. |
| # USE_PCRE2_JIT : enable JIT for faster regex on libpcre2 |
| # USE_POLL : enable poll(). Automatic. |
| # USE_THREAD : enable threads support. |
| # USE_STATIC_PCRE : enable static libpcre. Recommended. |
| # USE_STATIC_PCRE2 : enable static libpcre2. |
| # USE_TPROXY : enable transparent proxy. Automatic. |
| # USE_LINUX_TPROXY : enable full transparent proxy. Automatic. |
| # USE_LINUX_SPLICE : enable kernel 2.6 splicing. Automatic. |
| # USE_LIBCRYPT : enable encrypted passwords using -lcrypt |
| # USE_CRYPT_H : set it if your system requires including crypt.h |
| # USE_GETADDRINFO : use getaddrinfo() to resolve IPv6 host names. |
| # USE_OPENSSL : enable use of OpenSSL. Recommended, but see below. |
| # USE_OPENSSL_WOLFSSL : enable use of wolfSSL with the OpenSSL API |
| # USE_ENGINE : enable use of OpenSSL Engine. |
| # USE_LUA : enable Lua support. |
| # USE_ACCEPT4 : enable use of accept4() on linux. Automatic. |
| # USE_CLOSEFROM : enable use of closefrom() on *bsd, solaris. Automatic. |
| # USE_PRCTL : enable use of prctl(). Automatic. |
| # USE_PROCCTL : enable use of procctl(). Automatic. |
| # USE_ZLIB : enable zlib library support and disable SLZ |
| # USE_SLZ : enable slz library instead of zlib (default=enabled) |
| # USE_CPU_AFFINITY : enable pinning processes to CPU on Linux. Automatic. |
| # USE_TFO : enable TCP fast open. Supported on Linux >= 3.7. |
| # USE_NS : enable network namespace support. Supported on Linux >= 2.6.24. |
| # USE_DL : enable it if your system requires -ldl. Automatic on Linux. |
| # USE_MATH : enable use of -lm. Automatic. |
| # USE_RT : enable it if your system requires -lrt. Automatic on Linux. |
| # USE_BACKTRACE : enable backtrace(). Automatic on Linux. |
| # USE_PROMEX : enable the Prometheus exporter |
| # USE_DEVICEATLAS : enable DeviceAtlas api. |
| # USE_51DEGREES : enable third party device detection library from 51Degrees |
| # USE_51DEGREES_V4 : enable use of 51Degrees V4 engine with Hash algorithm |
| # USE_WURFL : enable WURFL detection library from Scientiamobile |
| # USE_SYSTEMD : enable sd_notify() support. |
| # USE_OBSOLETE_LINKER : use when the linker fails to emit __start_init/__stop_init |
| # USE_THREAD_DUMP : use the more advanced thread state dump system. Automatic. |
| # USE_OT : enable the OpenTracing filter |
| # USE_MEMORY_PROFILING : enable the memory profiler. Linux-glibc only. |
| # USE_LIBATOMIC : force to link with/without libatomic. Automatic. |
| # USE_PTHREAD_EMULATION: replace pthread's rwlocks with ours |
| # USE_SHM_OPEN : use shm_open() for the startup-logs |
| # |
| # Options can be forced by specifying "USE_xxx=1" or can be disabled by using |
| # "USE_xxx=" (empty string). The list of enabled and disabled options for a |
| # given TARGET is enumerated at the end of "make help". |
| # |
| # Variables useful for packagers : |
| # CC is set to "cc" by default and is used for compilation only. |
| # LD is set to "cc" by default and is used for linking only. |
| # ARCH may be useful to force build of 32-bit binary on 64-bit systems |
| # CFLAGS is automatically set for the specified CPU and may be overridden. |
| # LDFLAGS is automatically set to -g and may be overridden. |
| # DEP may be cleared to ignore changes to include files during development |
| # SMALL_OPTS may be used to specify some options to shrink memory usage. |
| # DEBUG may be used to set some internal debugging options. |
| # ERR may be set to non-empty to pass -Werror to the compiler |
| # ADDINC may be used to complete the include path in the form -Ipath. |
| # ADDLIB may be used to complete the library list in the form -Lpath -llib. |
| # DEFINE may be used to specify any additional define, which will be reported |
| # by "haproxy -vv" in CFLAGS. |
| # SILENT_DEFINE may be used to specify other defines which will not be |
| # reported by "haproxy -vv". |
| # EXTRA is used to force building or not building some extra tools. |
| # DESTDIR is not set by default and is used for installation only. |
| # It might be useful to set DESTDIR if you want to install haproxy |
| # in a sandbox. |
| # INSTALL is set to "install" by default and is used to provide the name of |
| # the install binary used by the install targets and any additional |
| # flags. |
| # PREFIX is set to "/usr/local" by default and is used for installation only. |
| # SBINDIR is set to "$(PREFIX)/sbin" by default and is used for installation |
| # only. |
| # MANDIR is set to "$(PREFIX)/share/man" by default and is used for |
| # installation only. |
| # DOCDIR is set to "$(PREFIX)/doc/haproxy" by default and is used for |
| # installation only. |
| # HLUA_PREPEND_PATH may be used to prepend a folder to Lua's default package.path. |
| # HLUA_PREPEND_CPATH may be used to prepend a folder to Lua's default package.cpath. |
| # |
| # Other variables : |
| # PCRE_CONFIG : force the binary path to get pcre config (by default |
| # pcre-config) |
| # PCREDIR : force the path to libpcre. |
| # PCRE_LIB : force the lib path to libpcre (defaults to $PCREDIR/lib). |
| # PCRE_INC : force the include path to libpcre ($PCREDIR/inc) |
| # PCRE2_CONFIG : force the binary path to get pcre2 config (by default |
| # pcre2-config) |
| # SSL_LIB : force the lib path to libssl/libcrypto |
| # SSL_INC : force the include path to libssl/libcrypto |
| # WOLFSSL_INC : force the include path to wolfSSL |
| # WOLFSSL_LIB : force the lib path to wolfSSL |
| # LUA_LIB : force the lib path to lua |
| # LUA_INC : force the include path to lua |
| # LUA_LIB_NAME : force the lib name (or automatically evaluated, by order of |
| # priority : lua5.4, lua54, lua5.3, lua53, lua). |
| # OT_DEBUG : compile the OpenTracing filter in debug mode |
| # OT_INC : force the include path to libopentracing-c-wrapper |
| # OT_LIB : force the lib path to libopentracing-c-wrapper |
| # OT_RUNPATH : add RUNPATH for libopentracing-c-wrapper to haproxy executable |
| # OT_USE_VARS : allows the use of variables for the OpenTracing context |
| # IGNOREGIT : ignore GIT commit versions if set. |
| # VERSION : force haproxy version reporting. |
| # SUBVERS : add a sub-version (eg: platform, model, ...). |
| # EXTRAVERSION : local version string to append (e.g. build number etc) |
| # VERDATE : force haproxy's release date. |
| # VTEST_PROGRAM : location of the vtest program to run reg-tests. |
| # DEBUG_USE_ABORT: use abort() for program termination, see include/haproxy/bug.h for details |
| |
| include include/make/verbose.mk |
| include include/make/compiler.mk |
| include include/make/options.mk |
| |
| #### Installation options. |
| DESTDIR = |
| INSTALL = install |
| PREFIX = /usr/local |
| SBINDIR = $(PREFIX)/sbin |
| MANDIR = $(PREFIX)/share/man |
| DOCDIR = $(PREFIX)/doc/haproxy |
| |
| #### TARGET system |
| # Use TARGET=<target_name> to optimize for a specific target OS among the |
| # following list (use the default "generic" if uncertain) : |
| # linux-glibc, linux-glibc-legacy, linux-musl, solaris, freebsd, freebsd-glibc, |
| # dragonfly, openbsd, netbsd, cygwin, haiku, aix51, aix52, aix72-gcc, osx, generic, |
| # custom |
| TARGET = |
| |
| #### TARGET CPU |
| # Use CPU=<cpu_name> to optimize for a particular CPU, among the following |
| # list : |
| # generic, native, i586, i686, ultrasparc, power8, power9, custom, |
| # a53, a72, armv81, armv8-auto |
| CPU = generic |
| |
| #### Architecture, used when not building for native architecture |
| # Use ARCH=<arch_name> to force build for a specific architecture. Known |
| # architectures will lead to "-m32" or "-m64" being added to CFLAGS and |
| # LDFLAGS. This can be required to build 32-bit binaries on 64-bit targets. |
| # Currently, only 32, 64, x86_64, i386, i486, i586 and i686 are understood. |
| ARCH = |
| |
| #### Toolchain options. |
| CC = cc |
| LD = $(CC) |
| |
| #### Debug flags (typically "-g"). |
| # Those flags only feed CFLAGS so it is not mandatory to use this form. |
| DEBUG_CFLAGS = -g |
| |
| #### Add -Werror when set to non-empty |
| ERR = |
| |
| #### May be used to force running a specific set of reg-tests |
| REG_TEST_FILES = |
| REG_TEST_SCRIPT=./scripts/run-regtests.sh |
| |
| #### Compiler-specific flags that may be used to disable some negative over- |
| # optimization or to silence some warnings. |
| # We rely on signed integer wraparound on overflow, however clang think it |
| # can do whatever it wants since it's an undefined behavior, so use -fwrapv |
| # to be sure we get the intended behavior. |
| WARN_CFLAGS := -Wtype-limits -Wshift-negative-value -Wshift-overflow=2 \ |
| -Wduplicated-cond -Wnull-dereference |
| SPEC_CFLAGS := -Wall -Wextra -Wundef -Wdeclaration-after-statement -Wfatal-errors |
| SPEC_CFLAGS += $(call cc-all-fast,$(WARN_CFLAGS)) |
| |
| SPEC_CFLAGS += $(call cc-opt-alt,-fwrapv,-fno-strict-overflow) |
| SPEC_CFLAGS += $(cc-wnouwo) |
| SPEC_CFLAGS += $(call cc-nowarn,address-of-packed-member) |
| SPEC_CFLAGS += $(call cc-nowarn,unused-label) |
| SPEC_CFLAGS += $(call cc-nowarn,sign-compare) |
| SPEC_CFLAGS += $(call cc-nowarn,unused-parameter) |
| SPEC_CFLAGS += $(call cc-nowarn,clobbered) |
| SPEC_CFLAGS += $(call cc-nowarn,missing-field-initializers) |
| SPEC_CFLAGS += $(call cc-nowarn,cast-function-type) |
| SPEC_CFLAGS += $(call cc-nowarn,string-plus-int) |
| SPEC_CFLAGS += $(call cc-nowarn,atomic-alignment) |
| |
| ifneq ($(ERR),) |
| SPEC_CFLAGS += -Werror |
| endif |
| |
| #### Memory usage tuning |
| # If small memory footprint is required, you can reduce the buffer size. There |
| # are 2 buffers per concurrent session, so 16 kB buffers will eat 32 MB memory |
| # with 1000 concurrent sessions. Putting it slightly lower than a page size |
| # will prevent the additional parameters to go beyond a page. 8030 bytes is |
| # exactly 5.5 TCP segments of 1460 bytes and is generally good. Useful tuning |
| # macros include : |
| # SYSTEM_MAXCONN, BUFSIZE, MAXREWRITE, REQURI_LEN, CAPTURE_LEN. |
| # Example: SMALL_OPTS = -DBUFSIZE=8030 -DMAXREWRITE=1030 -DSYSTEM_MAXCONN=1024 |
| SMALL_OPTS = |
| |
| #### Debug settings |
| # You can enable debugging on specific code parts by setting DEBUG=-DDEBUG_xxx. |
| # Use quotes and spaces if multiple options are needed (the DEBUG variables is |
| # passed as-is to CFLAGS). Please check sources for their exact meaning or do |
| # not use them at all. Some even more obscure ones might also be available |
| # without appearing here. Currently defined DEBUG macros include DEBUG_FULL, |
| # DEBUG_MEM_STATS, DEBUG_DONT_SHARE_POOLS, DEBUG_FD, DEBUG_POOL_INTEGRITY, |
| # DEBUG_NO_POOLS, DEBUG_FAIL_ALLOC, DEBUG_STRICT_ACTION=[0-3], DEBUG_HPACK, |
| # DEBUG_AUTH, DEBUG_SPOE, DEBUG_UAF, DEBUG_THREAD, DEBUG_STRICT, DEBUG_DEV, |
| # DEBUG_TASK, DEBUG_MEMORY_POOLS, DEBUG_POOL_TRACING, DEBUG_QPACK. |
| DEBUG = -DDEBUG_STRICT -DDEBUG_MEMORY_POOLS |
| |
| #### Trace options |
| # Use TRACE=1 to trace function calls to file "trace.out" or to stderr if not |
| # possible. |
| TRACE = |
| |
| #### Additional include and library dirs |
| # Redefine this if you want to add some special PATH to include/libs |
| ADDINC = |
| ADDLIB = |
| |
| #### Specific macro definitions |
| # Use DEFINE=-Dxxx to set any tunable macro. Anything declared here will appear |
| # in the build options reported by "haproxy -vv". Use SILENT_DEFINE if you do |
| # not want to pollute the report with complex defines. |
| # The following settings might be of interest when SSL is enabled : |
| # LISTEN_DEFAULT_CIPHERS is a cipher suite string used to set the default SSL |
| # ciphers on "bind" lines instead of using OpenSSL's defaults. |
| # CONNECT_DEFAULT_CIPHERS is a cipher suite string used to set the default |
| # SSL ciphers on "server" lines instead of using OpenSSL's defaults. |
| DEFINE = |
| SILENT_DEFINE = |
| |
| #### extra programs to build |
| # Force this to enable building extra programs or to disable them. |
| # It's automatically appended depending on the targets. |
| EXTRA = |
| |
| #### CPU dependent optimizations |
| # Some CFLAGS are set by default depending on the target CPU. Those flags only |
| # feed CPU_CFLAGS, which in turn feed CFLAGS, so it is not mandatory to use |
| # them. You should not have to change these options. Better use CPU_CFLAGS or |
| # even CFLAGS instead. |
| CPU_CFLAGS.generic = -O2 |
| CPU_CFLAGS.native = -O2 -march=native |
| CPU_CFLAGS.i586 = -O2 -march=i586 |
| CPU_CFLAGS.i686 = -O2 -march=i686 |
| CPU_CFLAGS.ultrasparc = -O6 -mcpu=v9 -mtune=ultrasparc |
| CPU_CFLAGS.power8 = -O2 -mcpu=power8 -mtune=power8 |
| CPU_CFLAGS.power9 = -O2 -mcpu=power9 -mtune=power9 |
| CPU_CFLAGS.a53 = -O2 -mcpu=cortex-a53 |
| CPU_CFLAGS.a72 = -O2 -mcpu=cortex-a72 |
| CPU_CFLAGS.armv81 = -O2 -march=armv8.1-a |
| CPU_CFLAGS.armv8-auto = -O2 -march=armv8-a+crc -moutline-atomics |
| CPU_CFLAGS = $(CPU_CFLAGS.$(CPU)) |
| |
| #### ARCH dependent flags, may be overridden by CPU flags |
| ARCH_FLAGS.32 = -m32 |
| ARCH_FLAGS.64 = -m64 |
| ARCH_FLAGS.i386 = -m32 -march=i386 |
| ARCH_FLAGS.i486 = -m32 -march=i486 |
| ARCH_FLAGS.i586 = -m32 -march=i586 |
| ARCH_FLAGS.i686 = -m32 -march=i686 |
| ARCH_FLAGS.x86_64 = -m64 -march=x86-64 |
| ARCH_FLAGS = $(ARCH_FLAGS.$(ARCH)) |
| |
| #### Common CFLAGS |
| # These CFLAGS contain general optimization options, CPU-specific optimizations |
| # and debug flags. They may be overridden by some distributions which prefer to |
| # set all of them at once instead of playing with the CPU and DEBUG variables. |
| CFLAGS = $(ARCH_FLAGS) $(CPU_CFLAGS) $(DEBUG_CFLAGS) $(SPEC_CFLAGS) |
| |
| #### Common LDFLAGS |
| # These LDFLAGS are used as the first "ld" options, regardless of any library |
| # path or any other option. They may be changed to add any linker-specific |
| # option at the beginning of the ld command line. |
| LDFLAGS = $(ARCH_FLAGS) -g |
| |
| #### list of all "USE_*" options. These ones must be updated if new options are |
| # added, so that the relevant options are properly added to the CFLAGS and to |
| # the reported build options. |
| use_opts = USE_EPOLL USE_KQUEUE USE_NETFILTER \ |
| USE_PCRE USE_PCRE_JIT USE_PCRE2 USE_PCRE2_JIT USE_POLL \ |
| USE_THREAD USE_PTHREAD_EMULATION USE_BACKTRACE \ |
| USE_STATIC_PCRE USE_STATIC_PCRE2 USE_TPROXY USE_LINUX_TPROXY \ |
| USE_LINUX_SPLICE USE_LIBCRYPT USE_CRYPT_H USE_ENGINE \ |
| USE_GETADDRINFO USE_OPENSSL USE_OPENSSL_WOLFSSL USE_LUA \ |
| USE_ACCEPT4 USE_CLOSEFROM USE_ZLIB USE_SLZ USE_CPU_AFFINITY \ |
| USE_TFO USE_NS USE_DL USE_RT USE_LIBATOMIC USE_MATH \ |
| USE_DEVICEATLAS USE_51DEGREES USE_51DEGREES_V4 \ |
| USE_WURFL USE_SYSTEMD USE_OBSOLETE_LINKER USE_PRCTL USE_PROCCTL \ |
| USE_THREAD_DUMP USE_EVPORTS USE_OT USE_QUIC USE_PROMEX \ |
| USE_MEMORY_PROFILING USE_SHM_OPEN |
| |
| # preset all variables for all supported build options among use_opts |
| $(reset_opts_vars) |
| |
| #### Target system options |
| |
| # poll() is always supported, unless explicitly disabled by passing USE_POLL="" |
| # on the make command line. |
| USE_POLL = default |
| |
| # SLZ is always supported unless explicitly disabled by passing USE_SLZ="" |
| # or disabled by enabling ZLIB using USE_ZLIB=1 |
| ifeq ($(USE_ZLIB),) |
| USE_SLZ = default |
| endif |
| |
| # generic system target has nothing specific |
| ifeq ($(TARGET),generic) |
| set_target_defaults = $(call default_opts,USE_POLL USE_TPROXY) |
| endif |
| |
| # Haiku |
| ifeq ($(TARGET),haiku) |
| TARGET_LDFLAGS = -lnetwork |
| set_target_defaults = $(call default_opts,USE_POLL USE_TPROXY USE_OBSOLETE_LINKER) |
| endif |
| |
| # For linux >= 2.6.28 and glibc |
| ifeq ($(TARGET),linux-glibc) |
| set_target_defaults = $(call default_opts, \ |
| USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \ |
| USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY \ |
| USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_NS USE_TFO \ |
| USE_GETADDRINFO USE_BACKTRACE USE_SHM_OPEN) |
| INSTALL = install -v |
| endif |
| |
| # For linux >= 2.6.28, glibc without new features |
| ifeq ($(TARGET),linux-glibc-legacy) |
| set_target_defaults = $(call default_opts, \ |
| USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \ |
| USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY \ |
| USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_GETADDRINFO) |
| INSTALL = install -v |
| endif |
| |
| # For linux >= 2.6.28 and musl |
| ifeq ($(TARGET),linux-musl) |
| set_target_defaults = $(call default_opts, \ |
| USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \ |
| USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY \ |
| USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_NS USE_TFO \ |
| USE_GETADDRINFO USE_SHM_OPEN) |
| INSTALL = install -v |
| endif |
| |
| # Solaris 10 and above |
| ifeq ($(TARGET),solaris) |
| set_target_defaults = $(call default_opts, \ |
| USE_POLL USE_TPROXY USE_LIBCRYPT USE_CRYPT_H USE_GETADDRINFO USE_THREAD \ |
| USE_RT USE_OBSOLETE_LINKER USE_EVPORTS USE_CLOSEFROM) |
| TARGET_CFLAGS = -DFD_SETSIZE=65536 -D_REENTRANT -D_XOPEN_SOURCE=600 -D__EXTENSIONS__ |
| TARGET_LDFLAGS = -lnsl -lsocket |
| endif |
| |
| # FreeBSD 10 and above |
| ifeq ($(TARGET),freebsd) |
| set_target_defaults = $(call default_opts, \ |
| USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \ |
| USE_ACCEPT4 USE_CLOSEFROM USE_GETADDRINFO USE_PROCCTL USE_SHM_OPEN) |
| endif |
| |
| # kFreeBSD glibc |
| ifeq ($(TARGET),freebsd-glibc) |
| set_target_defaults = $(call default_opts, \ |
| USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \ |
| USE_ACCEPT4 USE_GETADDRINFO USE_CRYPT_H USE_DL) |
| endif |
| |
| # DragonFlyBSD 4.3 and above |
| ifeq ($(TARGET),dragonfly) |
| set_target_defaults = $(call default_opts, \ |
| USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \ |
| USE_ACCEPT4 USE_CLOSEFROM USE_GETADDRINFO) |
| endif |
| |
| # Mac OS/X |
| ifeq ($(TARGET),osx) |
| set_target_defaults = $(call default_opts, \ |
| USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \ |
| USE_GETADDRINFO) |
| EXPORT_SYMBOL = -export_dynamic |
| endif |
| |
| # OpenBSD 6.3 and above |
| ifeq ($(TARGET),openbsd) |
| set_target_defaults = $(call default_opts, \ |
| USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_KQUEUE USE_ACCEPT4 \ |
| USE_CLOSEFROM USE_GETADDRINFO) |
| endif |
| |
| # NetBSD 8 and above |
| ifeq ($(TARGET),netbsd) |
| set_target_defaults = $(call default_opts, \ |
| USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_KQUEUE USE_ACCEPT4 \ |
| USE_CLOSEFROM USE_GETADDRINFO) |
| endif |
| |
| # AIX 5.1 only |
| ifeq ($(TARGET),aix51) |
| set_target_defaults = $(call default_opts, \ |
| USE_POLL USE_LIBCRYPT USE_OBSOLETE_LINKER) |
| TARGET_CFLAGS = -Dss_family=__ss_family -Dip6_hdr=ip6hdr -DSTEVENS_API -D_LINUX_SOURCE_COMPAT -Dunsetenv=my_unsetenv |
| DEBUG_CFLAGS = |
| endif |
| |
| # AIX 5.2 |
| ifeq ($(TARGET),aix52) |
| set_target_defaults = $(call default_opts, \ |
| USE_POLL USE_LIBCRYPT USE_OBSOLETE_LINKER) |
| TARGET_CFLAGS = -D_MSGQSUPPORT |
| DEBUG_CFLAGS = |
| endif |
| |
| # AIX 7.2 and above |
| ifeq ($(TARGET),aix72-gcc) |
| set_target_defaults = $(call default_opts, \ |
| USE_POLL USE_THREAD USE_LIBCRYPT USE_OBSOLETE_LINKER USE_GETADDRINFO) |
| TARGET_CFLAGS = -D_H_XMEM -D_H_VAR |
| USE_LIBATOMIC = implicit |
| endif |
| |
| # Cygwin |
| ifeq ($(TARGET),cygwin) |
| set_target_defaults = $(call default_opts, \ |
| USE_POLL USE_TPROXY USE_OBSOLETE_LINKER) |
| # Cygwin adds IPv6 support only in version 1.7 (in beta right now). |
| TARGET_CFLAGS = $(if $(filter 1.5.%, $(shell uname -r)), -DUSE_IPV6 -DAF_INET6=23 -DINET6_ADDRSTRLEN=46, ) |
| endif |
| |
| # set the default settings according to the target above |
| $(set_target_defaults) |
| |
| # Some architectures require to link with libatomic for atomics of certain |
| # sizes. These ones are reported as value 1 in the *_LOCK_FREE macros. Value |
| # 2 indicates that the builtin is native thus doesn't require libatomic. Hence |
| # any occurrence of 1 indicates libatomic is necessary. It's better to avoid |
| # linking with it by default as it's not always available nor deployed |
| # (especially on archs which do not need it). |
| ifneq ($(USE_THREAD),) |
| ifneq ($(shell $(CC) $(CFLAGS) -dM -E -xc - </dev/null 2>/dev/null | grep -c 'LOCK_FREE.*1'),0) |
| USE_LIBATOMIC = implicit |
| endif |
| endif |
| |
| #### Determine version, sub-version and release date. |
| # If GIT is found, and IGNOREGIT is not set, VERSION, SUBVERS and VERDATE are |
| # extracted from the last commit. Otherwise, use the contents of the files |
| # holding the same names in the current directory. |
| |
| ifeq ($(IGNOREGIT),) |
| VERSION := $(shell [ -d .git/. ] && (git describe --tags --match 'v*' --abbrev=0 | cut -c 2-) 2>/dev/null) |
| ifneq ($(VERSION),) |
| # OK git is there and works. |
| SUBVERS := $(shell comms=`git log --format=oneline --no-merges v$(VERSION).. 2>/dev/null | wc -l | tr -d '[:space:]'`; commit=`(git log -1 --pretty=%h --abbrev=6) 2>/dev/null`; [ $$comms -gt 0 ] && echo "-$$commit-$$comms") |
| VERDATE := $(shell git log -1 --pretty=format:%ci | cut -f1 -d' ' | tr '-' '/') |
| endif |
| endif |
| |
| # Last commit version not found, take it from the files. |
| ifeq ($(VERSION),) |
| VERSION := $(shell cat VERSION 2>/dev/null || touch VERSION) |
| endif |
| ifeq ($(SUBVERS),) |
| SUBVERS := $(shell (grep -v '\$$Format' SUBVERS 2>/dev/null || touch SUBVERS) | head -n 1) |
| endif |
| ifeq ($(VERDATE),) |
| VERDATE := $(shell (grep -v '^\$$Format' VERDATE 2>/dev/null || touch VERDATE) | head -n 1 | cut -f1 -d' ' | tr '-' '/') |
| endif |
| |
| # this one is always empty by default and appended verbatim |
| EXTRAVERSION = |
| |
| #### Build options |
| # Do not change these ones, enable USE_* variables instead. |
| OPTIONS_CFLAGS = |
| OPTIONS_LDFLAGS = |
| OPTIONS_OBJS = |
| |
| #### Extra objects to be built and integrated (used only for development) |
| EXTRA_OBJS = |
| |
| # This variable collects all USE_* values except those set to "implicit". This |
| # is used to report a list of all flags which were used to build this version. |
| # Do not assign anything to it. |
| BUILD_OPTIONS := $(call build_options) |
| |
| # All USE_* options have their equivalent macro defined in the code (some might |
| # possibly be unused though) |
| OPTIONS_CFLAGS += $(call opts_as_defines) |
| |
| ifneq ($(USE_LIBCRYPT),) |
| ifneq ($(TARGET),openbsd) |
| ifneq ($(TARGET),osx) |
| OPTIONS_LDFLAGS += -lcrypt |
| endif |
| endif |
| endif |
| |
| ifneq ($(USE_ZLIB),) |
| # Use ZLIB_INC and ZLIB_LIB to force path to zlib.h and libz.{a,so} if needed. |
| OPTIONS_CFLAGS += $(if $(ZLIB_INC),-I$(ZLIB_INC)) |
| OPTIONS_LDFLAGS += $(if $(ZLIB_LIB),-L$(ZLIB_LIB)) -lz |
| endif |
| |
| ifneq ($(USE_SLZ),) |
| OPTIONS_OBJS += src/slz.o |
| endif |
| |
| ifneq ($(USE_POLL),) |
| OPTIONS_OBJS += src/ev_poll.o |
| endif |
| |
| ifneq ($(USE_EPOLL),) |
| OPTIONS_OBJS += src/ev_epoll.o |
| endif |
| |
| ifneq ($(USE_KQUEUE),) |
| OPTIONS_OBJS += src/ev_kqueue.o |
| endif |
| |
| ifneq ($(USE_EVPORTS),) |
| OPTIONS_OBJS += src/ev_evports.o |
| endif |
| |
| ifneq ($(USE_RT),) |
| OPTIONS_LDFLAGS += -lrt |
| endif |
| |
| ifneq ($(USE_THREAD),) |
| OPTIONS_LDFLAGS += -lpthread |
| endif |
| |
| ifneq ($(USE_BACKTRACE),) |
| OPTIONS_LDFLAGS += -Wl,$(if $(EXPORT_SYMBOL),$(EXPORT_SYMBOL),--export-dynamic) |
| endif |
| |
| ifneq ($(USE_CPU_AFFINITY),) |
| OPTIONS_OBJS += src/cpuset.o |
| endif |
| |
| ifneq ($(USE_OPENSSL),) |
| # OpenSSL is packaged in various forms and with various dependencies. |
| # In general -lssl is enough, but on some platforms, -lcrypto may be needed, |
| # reason why it's added by default. Some even need -lz, then you'll need to |
| # pass it in the "ADDLIB" variable if needed. If your SSL libraries are not |
| # in the usual path, use SSL_INC=/path/to/inc and SSL_LIB=/path/to/lib. |
| ifeq ($(USE_OPENSSL_WOLFSSL),) |
| OPTIONS_CFLAGS += $(if $(SSL_INC),-I$(SSL_INC)) |
| OPTIONS_LDFLAGS += $(if $(SSL_LIB),-L$(SSL_LIB)) -lssl -lcrypto |
| endif |
| OPTIONS_OBJS += src/ssl_sock.o src/ssl_ckch.o src/ssl_sample.o src/ssl_crtlist.o src/cfgparse-ssl.o src/ssl_utils.o src/jwt.o src/ssl_ocsp.o |
| endif |
| |
| ifneq ($(USE_OPENSSL_WOLFSSL),) |
| OPTIONS_CFLAGS += $(if $(WOLFSSL_INC),-I$(WOLFSSL_INC) -I$(WOLFSSL_INC)/wolfssl) |
| OPTIONS_LDFLAGS += $(if $(WOLFSSL_LIB),-L$(WOLFSSL_LIB)) -lwolfssl |
| endif |
| |
| ifneq ($(USE_ENGINE),) |
| # OpenSSL 3.0 emits loud deprecation warnings by default when building with |
| # engine support, and this option is made to silence them. Better use it |
| # only when absolutely necessary, until there's a viable alternative to the |
| # engine API. |
| OPTIONS_CFLAGS += -DOPENSSL_SUPPRESS_DEPRECATED |
| endif |
| |
| ifneq ($(USE_QUIC),) |
| OPTIONS_OBJS += src/quic_conn.o src/mux_quic.o src/h3.o src/xprt_quic.o \ |
| src/quic_frame.o src/quic_tls.o src/quic_tp.o \ |
| src/quic_stats.o src/quic_sock.o src/proto_quic.o \ |
| src/qmux_trace.o src/quic_loss.o src/qpack-enc.o \ |
| src/quic_cc_newreno.o src/quic_cc_cubic.o src/qpack-tbl.o \ |
| src/qpack-dec.o src/hq_interop.o src/quic_stream.o \ |
| src/h3_stats.o src/qmux_http.o src/cfgparse-quic.o \ |
| src/cbuf.o src/quic_cc.o |
| endif |
| |
| ifneq ($(USE_LUA),) |
| check_lua_inc = $(shell if [ -d $(2)$(1) ]; then echo $(2)$(1); fi;) |
| LUA_INC := $(firstword $(foreach lib,lua5.4 lua54 lua5.3 lua53 lua,$(call check_lua_inc,$(lib),"/usr/include/"))) |
| OPTIONS_CFLAGS += $(if $(LUA_INC),-I$(LUA_INC)) |
| |
| check_lua_lib = $(shell echo "int main(){}" | $(CC) -o /dev/null -x c - $(2) -l$(1) 2>/dev/null && echo $(1)) |
| LUA_LIB = |
| LUA_LD_FLAGS := -Wl,$(if $(EXPORT_SYMBOL),$(EXPORT_SYMBOL),--export-dynamic) $(if $(LUA_LIB),-L$(LUA_LIB)) |
| |
| # Try to automatically detect the Lua library if not set |
| ifeq ($(LUA_LIB_NAME),) |
| LUA_LIB_NAME := $(firstword $(foreach lib,lua5.4 lua54 lua5.3 lua53 lua,$(call check_lua_lib,$(lib),$(LUA_LD_FLAGS)))) |
| endif |
| |
| # Lua lib name must be set now (forced/detected above) |
| ifeq ($(LUA_LIB_NAME),) |
| $(error unable to automatically detect the Lua library name, you can enforce its name with LUA_LIB_NAME=<name> (where <name> can be lua5.4, lua54, lua, ...)) |
| endif |
| |
| ifneq ($(HLUA_PREPEND_PATH),) |
| OPTIONS_CFLAGS += -DHLUA_PREPEND_PATH=$(HLUA_PREPEND_PATH) |
| BUILD_OPTIONS += HLUA_PREPEND_PATH=$(HLUA_PREPEND_PATH) |
| endif # HLUA_PREPEND_PATH |
| |
| ifneq ($(HLUA_PREPEND_CPATH),) |
| OPTIONS_CFLAGS += -DHLUA_PREPEND_CPATH=$(HLUA_PREPEND_CPATH) |
| BUILD_OPTIONS += HLUA_PREPEND_CPATH=$(HLUA_PREPEND_CPATH) |
| endif # HLUA_PREPEND_CPATH |
| |
| USE_MATH = implicit |
| OPTIONS_LDFLAGS += $(LUA_LD_FLAGS) -l$(LUA_LIB_NAME) |
| OPTIONS_OBJS += src/hlua.o src/hlua_fcn.o |
| endif # USE_LUA |
| |
| ifneq ($(USE_PROMEX),) |
| OPTIONS_OBJS += addons/promex/service-prometheus.o |
| endif |
| |
| ifneq ($(USE_DEVICEATLAS),) |
| # Use DEVICEATLAS_SRC and possibly DEVICEATLAS_INC and DEVICEATLAS_LIB to force path |
| # to DeviceAtlas headers and libraries if needed. |
| DEVICEATLAS_INC = $(DEVICEATLAS_SRC) |
| DEVICEATLAS_LIB = $(DEVICEATLAS_SRC) |
| ifeq ($(DEVICEATLAS_SRC),) |
| OPTIONS_LDFLAGS += -lda |
| else |
| ifeq ($(USE_PCRE),) |
| ifeq ($(USE_PCRE2),) |
| $(error the DeviceAtlas module needs the PCRE or the PCRE2 library in order to compile) |
| endif |
| endif |
| ifneq ($(USE_PCRE2),) |
| OPTIONS_CFLAGS += -DDA_REGEX_HDR=\"dac_pcre2.c\" -DDA_REGEX_TAG=2 |
| endif |
| OPTIONS_OBJS += $(DEVICEATLAS_LIB)/Os/daunix.o |
| OPTIONS_OBJS += $(DEVICEATLAS_LIB)/dadwcom.o |
| OPTIONS_OBJS += $(DEVICEATLAS_LIB)/dasch.o |
| OPTIONS_OBJS += $(DEVICEATLAS_LIB)/json.o |
| OPTIONS_OBJS += $(DEVICEATLAS_LIB)/dac.o |
| endif |
| OPTIONS_OBJS += addons/deviceatlas/da.o |
| OPTIONS_CFLAGS += $(if $(DEVICEATLAS_INC),-I$(DEVICEATLAS_INC)) |
| endif |
| |
| ifneq ($(USE_51DEGREES),) |
| ifneq ($(USE_51DEGREES_V4),) |
| $(error cannot compile both 51Degrees V3 and V4 engine support) |
| endif |
| endif |
| |
| ifneq ($(USE_51DEGREES)$(USE_51DEGREES_V4),) |
| # Use 51DEGREES_SRC and possibly 51DEGREES_INC and 51DEGREES_LIB to force path |
| # to 51degrees headers and libraries if needed. |
| 51DEGREES_INC = $(51DEGREES_SRC) |
| 51DEGREES_LIB = $(51DEGREES_SRC) |
| ifneq ($(USE_51DEGREES_V4),) |
| _51DEGREES_SRC = $(shell find $(51DEGREES_LIB) -maxdepth 2 -name '*.c') |
| OPTIONS_OBJS += $(_51DEGREES_SRC:%.c=%.o) |
| else |
| OPTIONS_OBJS += $(51DEGREES_LIB)/../cityhash/city.o |
| OPTIONS_OBJS += $(51DEGREES_LIB)/51Degrees.o |
| endif |
| OPTIONS_OBJS += addons/51degrees/51d.o |
| OPTIONS_CFLAGS += $(if $(51DEGREES_INC),-I$(51DEGREES_INC)) |
| ifneq ($(USE_51DEGREES_V4),) |
| OPTIONS_CFLAGS += -DUSE_51DEGREES_V4 |
| endif |
| ifeq ($(USE_THREAD),) |
| OPTIONS_CFLAGS += -DFIFTYONEDEGREES_NO_THREADING |
| ifneq ($(USE_51DEGREES_V4),) |
| OPTIONS_CFLAGS += -DFIFTYONE_DEGREES_NO_THREADING |
| endif |
| else |
| ifeq ($(USE_51DEGREES_V4),) |
| OPTIONS_OBJS += $(51DEGREES_LIB)/../threading.o |
| endif |
| endif |
| |
| OPTIONS_LDFLAGS += $(if $(51DEGREES_LIB),-L$(51DEGREES_LIB)) |
| USE_MATH = implicit |
| ifneq ($(USE_51DEGREES_V4),) |
| USE_LIBATOMIC = implicit |
| endif |
| endif |
| |
| ifneq ($(USE_WURFL),) |
| # Use WURFL_SRC and possibly WURFL_INC and WURFL_LIB to force path |
| # to WURFL headers and libraries if needed. |
| WURFL_INC = $(WURFL_SRC) |
| WURFL_LIB = $(WURFL_SRC) |
| OPTIONS_OBJS += addons/wurfl/wurfl.o |
| OPTIONS_CFLAGS += $(if $(WURFL_INC),-I$(WURFL_INC)) |
| ifneq ($(WURFL_DEBUG),) |
| OPTIONS_CFLAGS += -DWURFL_DEBUG |
| endif |
| ifneq ($(WURFL_HEADER_WITH_DETAILS),) |
| OPTIONS_CFLAGS += -DWURFL_HEADER_WITH_DETAILS |
| endif |
| OPTIONS_LDFLAGS += $(if $(WURFL_LIB),-L$(WURFL_LIB)) -lwurfl |
| endif |
| |
| ifneq ($(USE_SYSTEMD),) |
| OPTIONS_LDFLAGS += -lsystemd |
| endif |
| |
| ifneq ($(USE_PCRE)$(USE_STATIC_PCRE)$(USE_PCRE_JIT),) |
| ifneq ($(USE_PCRE2)$(USE_STATIC_PCRE2)$(USE_PCRE2_JIT),) |
| $(error cannot compile both PCRE and PCRE2 support) |
| endif |
| # PCREDIR is used to automatically construct the PCRE_INC and PCRE_LIB paths, |
| # by appending /include and /lib respectively. If your system does not use the |
| # same sub-directories, simply force these variables instead of PCREDIR. It is |
| # automatically detected but can be forced if required (for cross-compiling). |
| # Forcing PCREDIR to an empty string will let the compiler use the default |
| # locations. |
| |
| # in case only USE_STATIC_PCRE/USE_PCRE_JIT were set |
| USE_PCRE := $(if $(USE_PCRE),$(USE_PCRE),implicit) |
| PCRE_CONFIG := pcre-config |
| PCREDIR := $(shell $(PCRE_CONFIG) --prefix 2>/dev/null || echo /usr/local) |
| ifneq ($(PCREDIR),) |
| PCRE_INC := $(PCREDIR)/include |
| PCRE_LIB := $(PCREDIR)/lib |
| endif |
| |
| ifeq ($(USE_STATIC_PCRE),) |
| # dynamic PCRE |
| OPTIONS_CFLAGS += $(if $(PCRE_INC),-I$(PCRE_INC)) |
| OPTIONS_LDFLAGS += $(if $(PCRE_LIB),-L$(PCRE_LIB)) -lpcreposix -lpcre |
| else |
| # static PCRE |
| OPTIONS_CFLAGS += $(if $(PCRE_INC),-I$(PCRE_INC)) |
| OPTIONS_LDFLAGS += $(if $(PCRE_LIB),-L$(PCRE_LIB)) -Wl,-Bstatic -lpcreposix -lpcre -Wl,-Bdynamic |
| endif |
| endif # USE_PCRE |
| |
| ifneq ($(USE_PCRE2)$(USE_STATIC_PCRE2)$(USE_PCRE2_JIT),) |
| # in case only USE_STATIC_PCRE2/USE_PCRE2_JIT were set |
| USE_PCRE2 := $(if $(USE_PCRE2),$(USE_PCRE2),implicit) |
| PCRE2_CONFIG := pcre2-config |
| PCRE2DIR := $(shell $(PCRE2_CONFIG) --prefix 2>/dev/null || echo /usr/local) |
| ifneq ($(PCRE2DIR),) |
| PCRE2_INC := $(PCRE2DIR)/include |
| PCRE2_LIB := $(PCRE2DIR)/lib |
| |
| ifeq ($(PCRE2_WIDTH),) |
| PCRE2_WIDTH = 8 |
| endif |
| |
| ifneq ($(PCRE2_WIDTH),8) |
| ifneq ($(PCRE2_WIDTH),16) |
| ifneq ($(PCRE2_WIDTH),32) |
| $(error PCRE2_WIDTH needs to be set to either 8,16 or 32) |
| endif |
| endif |
| endif |
| |
| PCRE2_LDFLAGS := $(shell $(PCRE2_CONFIG) --libs$(PCRE2_WIDTH) 2>/dev/null || echo -L/usr/local/lib -lpcre2-$(PCRE2_WIDTH)) |
| |
| ifeq ($(PCRE2_LDFLAGS),) |
| $(error libpcre2-$(PCRE2_WIDTH) not found) |
| else |
| ifeq ($(PCRE2_WIDTH),8) |
| PCRE2_LDFLAGS += -lpcre2-posix |
| endif |
| endif |
| |
| OPTIONS_CFLAGS += -DPCRE2_CODE_UNIT_WIDTH=$(PCRE2_WIDTH) |
| OPTIONS_CFLAGS += $(if $(PCRE2_INC), -I$(PCRE2_INC)) |
| |
| ifneq ($(USE_STATIC_PCRE2),) |
| PCRE2_LDFLAGS := $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -Wl,-Bstatic -L$(PCRE2_LIB) $(PCRE2_LDFLAGS) -Wl,-Bdynamic |
| else |
| PCRE2_LDFLAGS := $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -L$(PCRE2_LIB) $(PCRE2_LDFLAGS) |
| endif |
| endif # PCRE2DIR |
| endif # USE_PCRE2 |
| |
| ifneq ($(USE_NS),) |
| OPTIONS_OBJS += src/namespace.o |
| endif |
| |
| ifneq ($(USE_OT),) |
| include addons/ot/Makefile |
| endif |
| |
| # better keep this one close to the end, as several libs above may need it |
| ifneq ($(USE_DL),) |
| DL_LDFLAGS = -ldl |
| endif |
| |
| ifneq ($(USE_MATH),) |
| MATH_LDFLAGS = -lm |
| endif |
| |
| ifneq ($(USE_LIBATOMIC),) |
| LIBATOMIC_LDFLAGS = -latomic |
| endif |
| |
| #### End of the USE_* options handling, any such option that would be added |
| #### below could be silently ignored. |
| |
| # appends all foo_{C,LD}FLAGS to OPTIONS_{C,LD}FLAGS |
| $(collect_opts_flags) |
| |
| #### Global compile options |
| VERBOSE_CFLAGS = $(CFLAGS) $(TARGET_CFLAGS) $(SMALL_OPTS) $(DEFINE) |
| COPTS = -Iinclude |
| |
| COPTS += $(CFLAGS) $(TARGET_CFLAGS) $(SMALL_OPTS) $(DEFINE) $(SILENT_DEFINE) |
| COPTS += $(DEBUG) $(OPTIONS_CFLAGS) $(ADDINC) |
| |
| ifneq ($(VERSION)$(SUBVERS)$(EXTRAVERSION),) |
| COPTS += -DCONFIG_HAPROXY_VERSION=\"$(VERSION)$(SUBVERS)$(EXTRAVERSION)\" |
| endif |
| |
| ifneq ($(VERDATE),) |
| COPTS += -DCONFIG_HAPROXY_DATE=\"$(VERDATE)\" |
| endif |
| |
| ifneq ($(TRACE),) |
| # if tracing is enabled, we want it to be as fast as possible |
| TRACE_COPTS := $(filter-out -O0 -O1 -O2 -pg -finstrument-functions,$(COPTS)) -O3 -fomit-frame-pointer |
| COPTS += -finstrument-functions |
| endif |
| |
| #### Global link options |
| # These options are added at the end of the "ld" command line. Use LDFLAGS to |
| # add options at the beginning of the "ld" command line if needed. |
| LDOPTS = $(TARGET_LDFLAGS) $(OPTIONS_LDFLAGS) $(ADDLIB) |
| |
| ifeq ($(TARGET),) |
| all: |
| @echo "Building HAProxy without specifying a TARGET is not supported." |
| @echo |
| @echo "Usage:" |
| @echo |
| @echo " $ make help # To print a full explanation." |
| @echo " $ make TARGET=xxx USE_<feature>=1 # To build HAProxy." |
| @echo |
| @echo "The most commonly used targets are:" |
| @echo |
| @echo " linux-glibc - Modern Linux with glibc" |
| @echo " linux-musl - Modern Linux with musl" |
| @echo " freebsd - FreeBSD" |
| @echo " openbsd - OpenBSD" |
| @echo " netbsd - NetBSD" |
| @echo " osx - macOS" |
| @echo " solaris - Solaris" |
| @echo |
| @echo "Choose the target which matches your OS the most in order to" |
| @echo "gain the maximum performance out of it." |
| @echo |
| @echo "Common features you might want to include in your build are:" |
| @echo |
| @echo " USE_OPENSSL=1 - Support for TLS encrypted connections" |
| @echo " USE_ZLIB=1 - Support for HTTP response compression" |
| @echo " USE_PCRE=1 - Support for PCRE regular expressions" |
| @echo " USE_LUA=1 - Support for dynamic processing using Lua" |
| @echo |
| @echo "Use 'make help' to print a full explanation of supported targets" |
| @echo "and features." |
| @echo |
| @exit 1 |
| else |
| ifneq ($(filter $(TARGET), linux linux22 linux24 linux24e linux26 linux2628),) |
| all: |
| @echo |
| @echo "Target '$(TARGET)' was removed from HAProxy 2.0 due to being irrelevant and" |
| @echo "often wrong. Please use 'linux-glibc' instead or define your custom target" |
| @echo "by checking available options using 'make help TARGET=<your-target>'." |
| @echo |
| @exit 1 |
| else |
| all: haproxy dev/flags/flags $(EXTRA) |
| endif # obsolete targets |
| endif # TARGET |
| |
| OBJS = |
| |
| ifneq ($(EXTRA_OBJS),) |
| OBJS += $(EXTRA_OBJS) |
| endif |
| |
| OBJS += src/mux_h2.o src/mux_fcgi.o src/mux_h1.o src/tcpcheck.o \ |
| src/stream.o src/stats.o src/http_ana.o src/server.o \ |
| src/stick_table.o src/sample.o src/flt_spoe.o src/tools.o \ |
| src/log.o src/cfgparse.o src/peers.o src/backend.o src/resolvers.o \ |
| src/cli.o src/connection.o src/proxy.o src/http_htx.o \ |
| src/cfgparse-listen.o src/pattern.o src/check.o src/haproxy.o \ |
| src/cache.o src/stconn.o src/http_act.o src/http_fetch.o \ |
| src/http_client.o src/listener.o src/dns.o src/vars.o src/debug.o \ |
| src/tcp_rules.o src/sink.o src/h1_htx.o src/task.o src/mjson.o \ |
| src/h2.o src/filters.o src/server_state.o src/payload.o \ |
| src/fcgi-app.o src/map.o src/htx.o src/h1.o src/pool.o \ |
| src/cfgparse-global.o src/trace.o src/tcp_sample.o \ |
| src/flt_http_comp.o src/mux_pt.o src/flt_trace.o src/mqtt.o \ |
| src/acl.o src/sock.o src/mworker.o src/tcp_act.o src/ring.o \ |
| src/session.o src/proto_tcp.o src/fd.o src/channel.o src/activity.o \ |
| src/queue.o src/lb_fas.o src/http_rules.o src/extcheck.o \ |
| src/flt_bwlim.o src/thread.o src/http.o src/lb_chash.o src/applet.o \ |
| src/compression.o src/raw_sock.o src/ncbuf.o src/frontend.o \ |
| src/errors.o src/uri_normalizer.o src/http_conv.o src/lb_fwrr.o \ |
| src/sha1.o src/proto_sockpair.o src/mailers.o src/lb_fwlc.o \ |
| src/ebmbtree.o src/cfgcond.o src/action.o src/xprt_handshake.o \ |
| src/protocol.o src/proto_uxst.o src/proto_udp.o src/lb_map.o \ |
| src/fix.o src/ev_select.o src/arg.o src/sock_inet.o src/event_hdl.o \ |
| src/mworker-prog.o src/hpack-dec.o src/cfgparse-tcp.o \ |
| src/sock_unix.o src/shctx.o src/proto_uxdg.o src/fcgi.o \ |
| src/eb64tree.o src/clock.o src/chunk.o src/cfgdiag.o src/signal.o \ |
| src/regex.o src/lru.o src/eb32tree.o src/eb32sctree.o \ |
| src/cfgparse-unix.o src/hpack-tbl.o src/ebsttree.o src/ebimtree.o \ |
| src/base64.o src/auth.o src/uri_auth.o src/time.o src/ebistree.o \ |
| src/dynbuf.o src/wdt.o src/pipe.o src/init.o src/http_acl.o \ |
| src/hpack-huff.o src/hpack-enc.o src/dict.o src/freq_ctr.o \ |
| src/ebtree.o src/hash.o src/dgram.o src/version.o |
| |
| ifneq ($(TRACE),) |
| OBJS += src/calltrace.o |
| endif |
| |
| # Used only for forced dependency checking. May be cleared during development. |
| INCLUDES = $(wildcard include/*/*.h) |
| DEP = $(INCLUDES) .build_opts |
| |
| help: |
| @sed -ne "/^[^#]*$$/q;s/^# \{0,1\}\(.*\)/\1/;p" Makefile |
| @echo; \ |
| if [ -n "$(TARGET)" ]; then \ |
| if [ -n "$(set_target_defaults)" ]; then \ |
| echo "Current TARGET: $(TARGET)"; \ |
| else \ |
| echo "Current TARGET: $(TARGET) (custom target)"; \ |
| fi; \ |
| else \ |
| echo "TARGET not set, you may pass 'TARGET=xxx' to set one among :";\ |
| echo " linux-glibc, linux-glibc-legacy, solaris, freebsd, dragonfly, netbsd,"; \ |
| echo " osx, openbsd, aix51, aix52, aix72-gcc, cygwin, haiku, generic,"; \ |
| echo " custom"; \ |
| fi |
| @echo;echo "Enabled features for TARGET '$(TARGET)' (disable with 'USE_xxx=') :" |
| @set -- $(enabled_opts); echo " $$*" | (fmt || cat) 2>/dev/null |
| @echo;echo "Disabled features for TARGET '$(TARGET)' (enable with 'USE_xxx=1') :" |
| @set -- $(disabled_opts); echo " $$*" | (fmt || cat) 2>/dev/null |
| |
| # Used only to force a rebuild if some build options change, but we don't do |
| # it for certain targets which take no build options |
| ifneq (reg-tests, $(firstword $(MAKECMDGOALS))) |
| build_opts = $(shell rm -f .build_opts.new; echo \'$(TARGET) $(BUILD_OPTIONS) $(VERBOSE_CFLAGS) $(DEBUG)\' > .build_opts.new; if cmp -s .build_opts .build_opts.new; then rm -f .build_opts.new; else mv -f .build_opts.new .build_opts; fi) |
| .build_opts: $(build_opts) |
| else |
| .build_opts: |
| endif # reg-tests |
| |
| haproxy: $(OPTIONS_OBJS) $(OBJS) |
| $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) |
| |
| objsize: haproxy |
| $(Q)objdump -t $^|grep ' g '|grep -F '.text'|awk '{print $$5 FS $$6}'|sort |
| |
| %.o: %.c $(DEP) |
| $(cmd_CC) $(COPTS) -c -o $@ $< |
| |
| admin/halog/halog: admin/halog/halog.o admin/halog/fgets2.o src/ebtree.o src/eb32tree.o src/eb64tree.o src/ebmbtree.o src/ebsttree.o src/ebistree.o src/ebimtree.o |
| $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) |
| |
| admin/dyncookie/dyncookie: admin/dyncookie/dyncookie.o |
| $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) |
| |
| dev/flags/flags: dev/flags/flags.o |
| $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) |
| |
| dev/haring/haring: dev/haring/haring.o |
| $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) |
| |
| dev/hpack/%: dev/hpack/%.o |
| $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) |
| |
| dev/poll/poll: |
| $(cmd_MAKE) -C dev/poll poll CC='$(CC)' OPTIMIZE='$(COPTS)' V='$(V)' |
| |
| dev/qpack/decode: dev/qpack/decode.o |
| $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) |
| |
| dev/tcploop/tcploop: |
| $(cmd_MAKE) -C dev/tcploop tcploop CC='$(CC)' OPTIMIZE='$(COPTS)' V='$(V)' |
| |
| dev/udp/udp-perturb: dev/udp/udp-perturb.o |
| $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) |
| |
| # rebuild it every time |
| .PHONY: src/version.c dev/poll/poll dev/tcploop/tcploop |
| |
| src/calltrace.o: src/calltrace.c $(DEP) |
| $(cmd_CC) $(TRACE_COPTS) -c -o $@ $< |
| |
| src/haproxy.o: src/haproxy.c $(DEP) |
| $(cmd_CC) $(COPTS) \ |
| -DBUILD_TARGET='"$(strip $(TARGET))"' \ |
| -DBUILD_ARCH='"$(strip $(ARCH))"' \ |
| -DBUILD_CPU='"$(strip $(CPU))"' \ |
| -DBUILD_CC='"$(strip $(CC))"' \ |
| -DBUILD_CFLAGS='"$(strip $(VERBOSE_CFLAGS))"' \ |
| -DBUILD_OPTIONS='"$(strip $(BUILD_OPTIONS))"' \ |
| -DBUILD_DEBUG='"$(strip $(DEBUG))"' \ |
| -DBUILD_FEATURES='"$(strip $(build_features))"' \ |
| -c -o $@ $< |
| |
| install-man: |
| $(Q)$(INSTALL) -d "$(DESTDIR)$(MANDIR)"/man1 |
| $(Q)$(INSTALL) -m 644 doc/haproxy.1 "$(DESTDIR)$(MANDIR)"/man1 |
| |
| EXCLUDE_DOCUMENTATION = lgpl gpl coding-style |
| DOCUMENTATION = $(filter-out $(EXCLUDE_DOCUMENTATION),$(patsubst doc/%.txt,%,$(wildcard doc/*.txt))) |
| |
| install-doc: |
| $(Q)$(INSTALL) -d "$(DESTDIR)$(DOCDIR)" |
| $(Q)for x in $(DOCUMENTATION); do \ |
| $(INSTALL) -m 644 doc/$$x.txt "$(DESTDIR)$(DOCDIR)" ; \ |
| done |
| |
| install-bin: |
| $(Q)for i in haproxy $(EXTRA); do \ |
| if ! [ -e "$$i" ]; then \ |
| echo "Please run 'make' before 'make install'."; \ |
| exit 1; \ |
| fi; \ |
| done |
| $(Q)$(INSTALL) -d "$(DESTDIR)$(SBINDIR)" |
| $(Q)$(INSTALL) haproxy $(EXTRA) "$(DESTDIR)$(SBINDIR)" |
| |
| install: install-bin install-man install-doc |
| |
| uninstall: |
| $(Q)rm -f "$(DESTDIR)$(MANDIR)"/man1/haproxy.1 |
| $(Q)for x in $(DOCUMENTATION); do \ |
| rm -f "$(DESTDIR)$(DOCDIR)"/$$x.txt ; \ |
| done |
| $(Q)-rmdir "$(DESTDIR)$(DOCDIR)" |
| $(Q)rm -f "$(DESTDIR)$(SBINDIR)"/haproxy |
| |
| clean: |
| $(Q)rm -f *.[oas] src/*.[oas] haproxy test .build_opts .build_opts.new |
| $(Q)for dir in . src dev/* admin/* addons/* include/* doc; do rm -f $$dir/*~ $$dir/*.rej $$dir/core; done |
| $(Q)rm -f haproxy-$(VERSION).tar.gz haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz |
| $(Q)rm -f haproxy-$(VERSION) haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION) nohup.out gmon.out |
| $(Q)rm -f addons/promex/*.[oas] |
| $(Q)rm -f addons/51degrees/*.[oas] addons/51degrees/dummy/*.[oas] addons/51degrees/dummy/*/*.[oas] |
| $(Q)rm -f addons/deviceatlas/*.[oas] addons/deviceatlas/dummy/*.[oas] addons/deviceatlas/dummy/*.o |
| $(Q)rm -f addons/deviceatlas/dummy/Os/*.o |
| $(Q)rm -f addons/ot/src/*.[oas] |
| $(Q)rm -f addons/wurfl/*.[oas] addons/wurfl/dummy/*.[oas] |
| $(Q)rm -f admin/*/*.[oas] admin/*/*/*.[oas] |
| $(Q)rm -f admin/iprange/iprange admin/iprange/ip6range admin/halog/halog |
| $(Q)rm -f admin/dyncookie/dyncookie |
| $(Q)rm -f dev/*/*.[oas] |
| $(Q)rm -f dev/flags/flags dev/haring/haring dev/poll/poll dev/tcploop/tcploop |
| $(Q)rm -f dev/hpack/decode dev/hpack/gen-enc dev/hpack/gen-rht |
| $(Q)rm -f dev/qpack/decode |
| |
| tags: |
| $(Q)find src include \( -name '*.c' -o -name '*.h' \) -print0 | \ |
| xargs -0 etags --declarations --members |
| |
| cscope: |
| $(Q)find src include -name "*.[ch]" -print | cscope -q -b -i - |
| |
| tar: clean |
| $(Q)ln -s . haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION) |
| $(Q)tar --exclude=haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/.git \ |
| --exclude=haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION) \ |
| --exclude=haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz \ |
| -cf - haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/* | gzip -c9 >haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz |
| $(Q)echo haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz |
| $(Q)rm -f haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION) |
| |
| git-tar: |
| $(Q)git archive --format=tar --prefix="haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/" HEAD | gzip -9 > haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz |
| $(Q)echo haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz |
| |
| version: |
| @echo "VERSION: $(VERSION)" |
| @echo "SUBVERS: $(SUBVERS)" |
| @echo "VERDATE: $(VERDATE)" |
| |
| # never use this one if you don't know what it is used for. |
| update-version: |
| @echo "Ready to update the following versions :" |
| @echo "VERSION: $(VERSION)" |
| @echo "SUBVERS: $(SUBVERS)" |
| @echo "VERDATE: $(VERDATE)" |
| @echo "Press [ENTER] to continue or Ctrl-C to abort now.";read |
| echo "$(VERSION)" > VERSION |
| echo "$(SUBVERS)" > SUBVERS |
| echo "$(VERDATE)" > VERDATE |
| |
| # just display the build options |
| opts: |
| @echo -n 'Using: ' |
| @echo -n 'TARGET="$(strip $(TARGET))" ' |
| @echo -n 'ARCH="$(strip $(ARCH))" ' |
| @echo -n 'CPU="$(strip $(CPU))" ' |
| @echo -n 'CC="$(strip $(CC))" ' |
| @echo -n 'ARCH_FLAGS="$(strip $(ARCH_FLAGS))" ' |
| @echo -n 'CPU_CFLAGS="$(strip $(CPU_CFLAGS))" ' |
| @echo -n 'DEBUG_CFLAGS="$(strip $(DEBUG_CFLAGS))" ' |
| @echo "$(strip $(BUILD_OPTIONS))" |
| @echo 'COPTS="$(strip $(COPTS))"' |
| @echo 'LDFLAGS="$(strip $(LDFLAGS))"' |
| @echo 'LDOPTS="$(strip $(LDOPTS))"' |
| @echo 'OPTIONS_OBJS="$(strip $(OPTIONS_OBJS))"' |
| @echo 'OBJS="$(strip $(OBJS))"' |
| |
| ifeq (reg-tests, $(firstword $(MAKECMDGOALS))) |
| REGTEST_ARGS := $(wordlist 2, $(words $(MAKECMDGOALS)), $(MAKECMDGOALS)) |
| $(eval $(REGTEST_ARGS):;@true) |
| endif |
| |
| # Target to run the regression testing script files. |
| reg-tests: |
| $(Q)$(REG_TEST_SCRIPT) --type "$(REGTESTS_TYPES)" $(REGTEST_ARGS) $(REG_TEST_FILES) |
| .PHONY: $(REGTEST_ARGS) |
| |
| reg-tests-help: |
| @echo |
| @echo "To launch the reg tests for haproxy, first export to your environment " |
| @echo "VTEST_PROGRAM variable to point to your vtest program:" |
| @echo " $$ export VTEST_PROGRAM=/opt/local/bin/vtest" |
| @echo "or" |
| @echo " $$ setenv VTEST_PROGRAM /opt/local/bin/vtest" |
| @echo |
| @echo "The same thing may be done to set your haproxy program with HAPROXY_PROGRAM " |
| @echo "but with ./haproxy as default value." |
| @echo |
| @echo "To run all the tests:" |
| @echo " $$ make reg-tests" |
| @echo |
| @echo "You can also set the programs to be used on the command line:" |
| @echo " $$ VTEST_PROGRAM=<...> HAPROXY_PROGRAM=<...> make reg-tests" |
| @echo |
| @echo "To run tests with specific types:" |
| @echo " $$ REGTESTS_TYPES=slow,default make reg-tests" |
| @echo |
| @echo "with 'default,bug,devel,slow' as default value for REGTESTS_TYPES variable." |
| @echo |
| @echo "About the reg test types:" |
| @echo " any : all the tests without distinction (this is the default" |
| @echo " value of REGTESTS_TYPES." |
| @echo " default : dedicated to pure haproxy compliance tests." |
| @echo " slow : scripts which take non negligible time to run." |
| @echo " bug : scripts in relation with bugs they help to reproduce." |
| @echo " broken : scripts triggering known broken behaviors for which" |
| @echo " there is still no fix." |
| @echo " experimental: for scripts which are experimental, typically used to" |
| @echo " develop new scripts." |
| @echo |
| @echo "Note that 'reg-tests' target run '"$(REG_TEST_SCRIPT)"' script" |
| @echo "(see --help option of this script for more information)." |
| |
| .PHONY: reg-tests reg-tests-help |