blob: e82ab5656a82e0c648bb4233cf9c0bbd32f1b5ab [file] [log] [blame]
/*
* HA-Proxy : High Availability-enabled HTTP/TCP proxy
* Copyright 2000-2010 Willy Tarreau <w@1wt.eu>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Please refer to RFC2068 or RFC2616 for informations about HTTP protocol, and
* RFC2965 for informations about cookies usage. More generally, the IETF HTTP
* Working Group's web site should be consulted for protocol related changes :
*
* http://ftp.ics.uci.edu/pub/ietf/http/
*
* Pending bugs (may be not fixed because never reproduced) :
* - solaris only : sometimes, an HTTP proxy with only a dispatch address causes
* the proxy to terminate (no core) if the client breaks the connection during
* the response. Seen on 1.1.8pre4, but never reproduced. May not be related to
* the snprintf() bug since requests were simple (GET / HTTP/1.0), but may be
* related to missing setsid() (fixed in 1.1.15)
* - a proxy with an invalid config will prevent the startup even if disabled.
*
* ChangeLog has moved to the CHANGELOG file.
*
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <ctype.h>
#include <sys/time.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/tcp.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <netdb.h>
#include <fcntl.h>
#include <errno.h>
#include <signal.h>
#include <stdarg.h>
#include <sys/resource.h>
#include <time.h>
#include <syslog.h>
#ifdef DEBUG_FULL
#include <assert.h>
#endif
#include <common/appsession.h>
#include <common/base64.h>
#include <common/cfgparse.h>
#include <common/compat.h>
#include <common/config.h>
#include <common/defaults.h>
#include <common/errors.h>
#include <common/memory.h>
#include <common/mini-clist.h>
#include <common/regex.h>
#include <common/standard.h>
#include <common/time.h>
#include <common/uri_auth.h>
#include <common/version.h>
#include <types/capture.h>
#include <types/global.h>
#include <proto/auth.h>
#include <proto/acl.h>
#include <proto/backend.h>
#include <proto/buffers.h>
#include <proto/checks.h>
#include <proto/client.h>
#include <proto/fd.h>
#include <proto/log.h>
#include <proto/protocols.h>
#include <proto/proto_http.h>
#include <proto/proxy.h>
#include <proto/queue.h>
#include <proto/server.h>
#include <proto/session.h>
#include <proto/signal.h>
#include <proto/stream_sock.h>
#include <proto/task.h>
#ifdef CONFIG_HAP_CTTPROXY
#include <proto/cttproxy.h>
#endif
/*********************************************************************/
/*********************************************************************/
/* list of config files */
static struct list cfg_cfgfiles = LIST_HEAD_INIT(cfg_cfgfiles);
char *progname = NULL; /* program name */
int pid; /* current process id */
int relative_pid = 1; /* process id starting at 1 */
/* global options */
struct global global = {
logfac1 : -1,
logfac2 : -1,
loglev1 : 7, /* max syslog level : debug */
loglev2 : 7,
.stats_sock = {
.maxconn = 10, /* 10 concurrent stats connections */
.perm = {
.ux = {
.uid = -1,
.gid = -1,
.mode = 0,
}
}
},
.tune = {
.bufsize = BUFSIZE,
.maxrewrite = MAXREWRITE,
},
/* others NULL OK */
};
/*********************************************************************/
int stopping; /* non zero means stopping in progress */
/* Here we store informations about the pids of the processes we may pause
* or kill. We will send them a signal every 10 ms until we can bind to all
* our ports. With 200 retries, that's about 2 seconds.
*/
#define MAX_START_RETRIES 200
static int nb_oldpids = 0;
static int *oldpids = NULL;
static int oldpids_sig; /* use USR1 or TERM */
/* this is used to drain data, and as a temporary buffer for sprintf()... */
char trash[BUFSIZE];
/* this buffer is always the same size as standard buffers and is used for
* swapping data inside a buffer.
*/
char *swap_buffer = NULL;
const int zero = 0;
const int one = 1;
const struct linger nolinger = { .l_onoff = 1, .l_linger = 0 };
char hostname[MAX_HOSTNAME_LEN] = "";
/*********************************************************************/
/* general purpose functions ***************************************/
/*********************************************************************/
void display_version()
{
printf("HA-Proxy version " HAPROXY_VERSION " " HAPROXY_DATE"\n");
printf("Copyright 2000-2010 Willy Tarreau <w@1wt.eu>\n\n");
}
void display_build_opts()
{
printf("Build options :"
#ifdef BUILD_TARGET
"\n TARGET = " BUILD_TARGET
#endif
#ifdef BUILD_CPU
"\n CPU = " BUILD_CPU
#endif
#ifdef BUILD_CC
"\n CC = " BUILD_CC
#endif
#ifdef BUILD_CFLAGS
"\n CFLAGS = " BUILD_CFLAGS
#endif
#ifdef BUILD_OPTIONS
"\n OPTIONS = " BUILD_OPTIONS
#endif
"\n\nDefault settings :"
"\n maxconn = %d, bufsize = %d, maxrewrite = %d, maxpollevents = %d"
"\n\n",
DEFAULT_MAXCONN, BUFSIZE, MAXREWRITE, MAX_POLL_EVENTS);
printf("Encrypted password support via crypt(3): "
#ifdef CONFIG_HAP_CRYPT
"yes"
#else
"no"
#endif
"\n");
putchar('\n');
list_pollers(stdout);
putchar('\n');
}
/*
* This function prints the command line usage and exits
*/
void usage(char *name)
{
display_version();
fprintf(stderr,
"Usage : %s [-f <cfgfile>]* [ -vdV"
"D ] [ -n <maxconn> ] [ -N <maxpconn> ]\n"
" [ -p <pidfile> ] [ -m <max megs> ]\n"
" -v displays version ; -vv shows known build options.\n"
" -d enters debug mode ; -db only disables background mode.\n"
" -V enters verbose mode (disables quiet mode)\n"
" -D goes daemon\n"
" -q quiet mode : don't display messages\n"
" -c check mode : only check config files and exit\n"
" -n sets the maximum total # of connections (%d)\n"
" -m limits the usable amount of memory (in MB)\n"
" -N sets the default, per-proxy maximum # of connections (%d)\n"
" -p writes pids of all children to this file\n"
#if defined(ENABLE_EPOLL)
" -de disables epoll() usage even when available\n"
#endif
#if defined(ENABLE_SEPOLL)
" -ds disables speculative epoll() usage even when available\n"
#endif
#if defined(ENABLE_KQUEUE)
" -dk disables kqueue() usage even when available\n"
#endif
#if defined(ENABLE_POLL)
" -dp disables poll() usage even when available\n"
#endif
#if defined(CONFIG_HAP_LINUX_SPLICE)
" -dS disables splice usage (broken on old kernels)\n"
#endif
" -sf/-st [pid ]* finishes/terminates old pids. Must be last arguments.\n"
"\n",
name, DEFAULT_MAXCONN, cfg_maxpconn);
exit(1);
}
/*********************************************************************/
/* more specific functions ***************************************/
/*********************************************************************/
/*
* upon SIGUSR1, let's have a soft stop.
*/
void sig_soft_stop(int sig)
{
soft_stop();
pool_gc2();
signal_register(sig, SIG_IGN);
}
/*
* upon SIGTTOU, we pause everything
*/
void sig_pause(int sig)
{
pause_proxies();
pool_gc2();
}
/*
* upon SIGTTIN, let's have a soft stop.
*/
void sig_listen(int sig)
{
listen_proxies();
}
/*
* this function dumps every server's state when the process receives SIGHUP.
*/
void sig_dump_state(int sig)
{
struct proxy *p = proxy;
Warning("SIGHUP received, dumping servers states.\n");
while (p) {
struct server *s = p->srv;
send_log(p, LOG_NOTICE, "SIGHUP received, dumping servers states for proxy %s.\n", p->id);
while (s) {
snprintf(trash, sizeof(trash),
"SIGHUP: Server %s/%s is %s. Conn: %d act, %d pend, %lld tot.",
p->id, s->id,
(s->state & SRV_RUNNING) ? "UP" : "DOWN",
s->cur_sess, s->nbpend, s->counters.cum_sess);
Warning("%s\n", trash);
send_log(p, LOG_NOTICE, "%s\n", trash);
s = s->next;
}
/* FIXME: those info are a bit outdated. We should be able to distinguish between FE and BE. */
if (!p->srv) {
snprintf(trash, sizeof(trash),
"SIGHUP: Proxy %s has no servers. Conn: act(FE+BE): %d+%d, %d pend (%d unass), tot(FE+BE): %lld+%lld.",
p->id,
p->feconn, p->beconn, p->totpend, p->nbpend, p->counters.cum_feconn, p->counters.cum_beconn);
} else if (p->srv_act == 0) {
snprintf(trash, sizeof(trash),
"SIGHUP: Proxy %s %s ! Conn: act(FE+BE): %d+%d, %d pend (%d unass), tot(FE+BE): %lld+%lld.",
p->id,
(p->srv_bck) ? "is running on backup servers" : "has no server available",
p->feconn, p->beconn, p->totpend, p->nbpend, p->counters.cum_feconn, p->counters.cum_beconn);
} else {
snprintf(trash, sizeof(trash),
"SIGHUP: Proxy %s has %d active servers and %d backup servers available."
" Conn: act(FE+BE): %d+%d, %d pend (%d unass), tot(FE+BE): %lld+%lld.",
p->id, p->srv_act, p->srv_bck,
p->feconn, p->beconn, p->totpend, p->nbpend, p->counters.cum_feconn, p->counters.cum_beconn);
}
Warning("%s\n", trash);
send_log(p, LOG_NOTICE, "%s\n", trash);
p = p->next;
}
}
void dump(int sig)
{
#if 0
struct task *t;
struct session *s;
struct rb_node *node;
for(node = rb_first(&wait_queue[0]);
node != NULL; node = rb_next(node)) {
t = rb_entry(node, struct task, rb_node);
s = t->context;
qfprintf(stderr,"[dump] wq: task %p, still %ld ms, "
"cli=%d, srv=%d, req=%d, rep=%d\n",
s, tv_ms_remain(&now, &t->expire),
s->si[0].state,
s->si[1].state,
s->req->l, s->rep?s->rep->l:0);
}
#endif
/* dump memory usage then free everything possible */
dump_pools();
pool_gc2();
}
#ifdef DEBUG_MEMORY
static void fast_stop(void)
{
struct proxy *p;
p = proxy;
while (p) {
p->grace = 0;
p = p->next;
}
soft_stop();
}
void sig_int(int sig)
{
/* This would normally be a hard stop,
but we want to be sure about deallocation,
and so on, so we do a soft stop with
0 GRACE time
*/
fast_stop();
pool_gc2();
/* If we are killed twice, we decide to die */
signal_register(sig, SIG_DFL);
}
void sig_term(int sig)
{
/* This would normally be a hard stop,
but we want to be sure about deallocation,
and so on, so we do a soft stop with
0 GRACE time
*/
fast_stop();
pool_gc2();
/* If we are killed twice, we decide to die */
signal_register(sig, SIG_DFL);
}
#endif
/*
* This function initializes all the necessary variables. It only returns
* if everything is OK. If something fails, it exits.
*/
void init(int argc, char **argv)
{
int i;
int arg_mode = 0; /* MODE_DEBUG, ... */
char *old_argv = *argv;
char *tmp;
char *cfg_pidfile = NULL;
int err_code = 0;
struct wordlist *wl;
/*
* Initialize the previously static variables.
*/
totalconn = actconn = maxfd = listeners = stopping = 0;
#ifdef HAPROXY_MEMMAX
global.rlimit_memmax = HAPROXY_MEMMAX;
#endif
tv_update_date(-1,-1);
start_date = now;
signal_init();
init_task();
init_session();
/* warning, we init buffers later */
init_pendconn();
init_proto_http();
global.tune.options |= GTUNE_USE_SELECT; /* select() is always available */
#if defined(ENABLE_POLL)
global.tune.options |= GTUNE_USE_POLL;
#endif
#if defined(ENABLE_EPOLL)
global.tune.options |= GTUNE_USE_EPOLL;
#endif
#if defined(ENABLE_SEPOLL)
global.tune.options |= GTUNE_USE_SEPOLL;
#endif
#if defined(ENABLE_KQUEUE)
global.tune.options |= GTUNE_USE_KQUEUE;
#endif
#if defined(CONFIG_HAP_LINUX_SPLICE)
global.tune.options |= GTUNE_USE_SPLICE;
#endif
pid = getpid();
progname = *argv;
while ((tmp = strchr(progname, '/')) != NULL)
progname = tmp + 1;
argc--; argv++;
while (argc > 0) {
char *flag;
if (**argv == '-') {
flag = *argv+1;
/* 1 arg */
if (*flag == 'v') {
display_version();
if (flag[1] == 'v') /* -vv */
display_build_opts();
exit(0);
}
#if defined(ENABLE_EPOLL)
else if (*flag == 'd' && flag[1] == 'e')
global.tune.options &= ~GTUNE_USE_EPOLL;
#endif
#if defined(ENABLE_SEPOLL)
else if (*flag == 'd' && flag[1] == 's')
global.tune.options &= ~GTUNE_USE_SEPOLL;
#endif
#if defined(ENABLE_POLL)
else if (*flag == 'd' && flag[1] == 'p')
global.tune.options &= ~GTUNE_USE_POLL;
#endif
#if defined(ENABLE_KQUEUE)
else if (*flag == 'd' && flag[1] == 'k')
global.tune.options &= ~GTUNE_USE_KQUEUE;
#endif
#if defined(CONFIG_HAP_LINUX_SPLICE)
else if (*flag == 'd' && flag[1] == 'S')
global.tune.options &= ~GTUNE_USE_SPLICE;
#endif
else if (*flag == 'V')
arg_mode |= MODE_VERBOSE;
else if (*flag == 'd' && flag[1] == 'b')
arg_mode |= MODE_FOREGROUND;
else if (*flag == 'd')
arg_mode |= MODE_DEBUG;
else if (*flag == 'c')
arg_mode |= MODE_CHECK;
else if (*flag == 'D')
arg_mode |= MODE_DAEMON;
else if (*flag == 'q')
arg_mode |= MODE_QUIET;
else if (*flag == 's' && (flag[1] == 'f' || flag[1] == 't')) {
/* list of pids to finish ('f') or terminate ('t') */
if (flag[1] == 'f')
oldpids_sig = SIGUSR1; /* finish then exit */
else
oldpids_sig = SIGTERM; /* terminate immediately */
argv++; argc--;
if (argc > 0) {
oldpids = calloc(argc, sizeof(int));
while (argc > 0) {
oldpids[nb_oldpids] = atol(*argv);
if (oldpids[nb_oldpids] <= 0)
usage(old_argv);
argc--; argv++;
nb_oldpids++;
}
}
}
else { /* >=2 args */
argv++; argc--;
if (argc == 0)
usage(old_argv);
switch (*flag) {
case 'n' : cfg_maxconn = atol(*argv); break;
case 'm' : global.rlimit_memmax = atol(*argv); break;
case 'N' : cfg_maxpconn = atol(*argv); break;
case 'f' :
wl = (struct wordlist *)calloc(1, sizeof(*wl));
if (!wl) {
Alert("Cannot load configuration file %s : out of memory.\n", *argv);
exit(1);
}
wl->s = *argv;
LIST_ADDQ(&cfg_cfgfiles, &wl->list);
break;
case 'p' : cfg_pidfile = *argv; break;
default: usage(old_argv);
}
}
}
else
usage(old_argv);
argv++; argc--;
}
global.mode = MODE_STARTING | /* during startup, we want most of the alerts */
(arg_mode & (MODE_DAEMON | MODE_FOREGROUND | MODE_VERBOSE
| MODE_QUIET | MODE_CHECK | MODE_DEBUG));
if (LIST_ISEMPTY(&cfg_cfgfiles))
usage(old_argv);
gethostname(hostname, MAX_HOSTNAME_LEN);
have_appsession = 0;
global.maxsock = 10; /* reserve 10 fds ; will be incremented by socket eaters */
init_default_instance();
list_for_each_entry(wl, &cfg_cfgfiles, list) {
int ret;
ret = readcfgfile(wl->s);
if (ret == -1) {
Alert("Could not open configuration file %s : %s\n",
wl->s, strerror(errno));
exit(1);
}
if (ret & (ERR_ABORT|ERR_FATAL))
Alert("Error(s) found in configuration file : %s\n", wl->s);
err_code |= ret;
if (err_code & ERR_ABORT)
exit(1);
}
err_code |= check_config_validity();
if (err_code & (ERR_ABORT|ERR_FATAL)) {
Alert("Fatal errors found in configuration.\n");
exit(1);
}
if (global.mode & MODE_CHECK) {
qfprintf(stdout, "Configuration file is valid\n");
exit(0);
}
/* now we know the buffer size, we can initialize the buffers */
init_buffer();
if (have_appsession)
appsession_init();
if (start_checks() < 0)
exit(1);
if (cfg_maxconn > 0)
global.maxconn = cfg_maxconn;
if (cfg_pidfile) {
free(global.pidfile);
global.pidfile = strdup(cfg_pidfile);
}
if (global.maxconn == 0)
global.maxconn = DEFAULT_MAXCONN;
if (!global.maxpipes) {
/* maxpipes not specified. Count how many frontends and backends
* may be using splicing, and bound that to maxconn.
*/
struct proxy *cur;
int nbfe = 0, nbbe = 0;
for (cur = proxy; cur; cur = cur->next) {
if (cur->options2 & (PR_O2_SPLIC_ANY)) {
if (cur->cap & PR_CAP_FE)
nbfe += cur->maxconn;
if (cur->cap & PR_CAP_BE)
nbbe += cur->fullconn ? cur->fullconn : global.maxconn;
}
}
global.maxpipes = MAX(nbfe, nbbe);
if (global.maxpipes > global.maxconn)
global.maxpipes = global.maxconn;
global.maxpipes /= 4;
}
global.maxsock += global.maxconn * 2; /* each connection needs two sockets */
global.maxsock += global.maxpipes * 2; /* each pipe needs two FDs */
if (global.tune.maxpollevents <= 0)
global.tune.maxpollevents = MAX_POLL_EVENTS;
if (global.tune.maxaccept == 0) {
if (global.nbproc > 1)
global.tune.maxaccept = 8; /* leave some conns to other processes */
else
global.tune.maxaccept = 100; /* accept many incoming conns at once */
}
if (global.tune.recv_enough == 0)
global.tune.recv_enough = MIN_RECV_AT_ONCE_ENOUGH;
if (global.tune.maxrewrite >= global.tune.bufsize / 2)
global.tune.maxrewrite = global.tune.bufsize / 2;
if (arg_mode & (MODE_DEBUG | MODE_FOREGROUND)) {
/* command line debug mode inhibits configuration mode */
global.mode &= ~(MODE_DAEMON | MODE_QUIET);
}
global.mode |= (arg_mode & (MODE_DAEMON | MODE_FOREGROUND | MODE_QUIET |
MODE_VERBOSE | MODE_DEBUG ));
if ((global.mode & MODE_DEBUG) && (global.mode & (MODE_DAEMON | MODE_QUIET))) {
Warning("<debug> mode incompatible with <quiet> and <daemon>. Keeping <debug> only.\n");
global.mode &= ~(MODE_DAEMON | MODE_QUIET);
}
if ((global.nbproc > 1) && !(global.mode & MODE_DAEMON)) {
if (!(global.mode & (MODE_FOREGROUND | MODE_DEBUG)))
Warning("<nbproc> is only meaningful in daemon mode. Setting limit to 1 process.\n");
global.nbproc = 1;
}
if (global.nbproc < 1)
global.nbproc = 1;
swap_buffer = (char *)calloc(1, global.tune.bufsize);
fdinfo = (struct fdinfo *)calloc(1,
sizeof(struct fdinfo) * (global.maxsock));
fdtab = (struct fdtab *)calloc(1,
sizeof(struct fdtab) * (global.maxsock));
for (i = 0; i < global.maxsock; i++) {
fdtab[i].state = FD_STCLOSE;
}
/*
* Note: we could register external pollers here.
* Built-in pollers have been registered before main().
*/
if (!(global.tune.options & GTUNE_USE_KQUEUE))
disable_poller("kqueue");
if (!(global.tune.options & GTUNE_USE_EPOLL))
disable_poller("epoll");
if (!(global.tune.options & GTUNE_USE_SEPOLL))
disable_poller("sepoll");
if (!(global.tune.options & GTUNE_USE_POLL))
disable_poller("poll");
if (!(global.tune.options & GTUNE_USE_SELECT))
disable_poller("select");
/* Note: we could disable any poller by name here */
if (global.mode & (MODE_VERBOSE|MODE_DEBUG))
list_pollers(stderr);
if (!init_pollers()) {
Alert("No polling mechanism available.\n");
exit(1);
}
if (global.mode & (MODE_VERBOSE|MODE_DEBUG)) {
printf("Using %s() as the polling mechanism.\n", cur_poller.name);
}
if (!global.node)
global.node = strdup(hostname);
}
void deinit(void)
{
struct proxy *p = proxy, *p0;
struct cap_hdr *h,*h_next;
struct server *s,*s_next;
struct listener *l,*l_next;
struct acl_cond *cond, *condb;
struct hdr_exp *exp, *expb;
struct acl *acl, *aclb;
struct switching_rule *rule, *ruleb;
struct redirect_rule *rdr, *rdrb;
struct wordlist *wl, *wlb;
struct cond_wordlist *cwl, *cwlb;
struct uri_auth *uap, *ua = NULL;
int i;
while (p) {
free(p->id);
free(p->check_req);
free(p->cookie_name);
free(p->cookie_domain);
free(p->url_param_name);
free(p->capture_name);
free(p->monitor_uri);
for (i = 0; i < HTTP_ERR_SIZE; i++)
chunk_destroy(&p->errmsg[i]);
list_for_each_entry_safe(cwl, cwlb, &p->req_add, list) {
LIST_DEL(&cwl->list);
free(cwl->s);
free(cwl);
}
list_for_each_entry_safe(cwl, cwlb, &p->rsp_add, list) {
LIST_DEL(&cwl->list);
free(cwl->s);
free(cwl);
}
list_for_each_entry_safe(cond, condb, &p->block_cond, list) {
LIST_DEL(&cond->list);
prune_acl_cond(cond);
free(cond);
}
list_for_each_entry_safe(cond, condb, &p->mon_fail_cond, list) {
LIST_DEL(&cond->list);
prune_acl_cond(cond);
free(cond);
}
for (exp = p->req_exp; exp != NULL; ) {
if (exp->preg) {
regfree((regex_t *)exp->preg);
free((regex_t *)exp->preg);
}
if (exp->replace && exp->action != ACT_SETBE)
free((char *)exp->replace);
expb = exp;
exp = exp->next;
free(expb);
}
for (exp = p->rsp_exp; exp != NULL; ) {
if (exp->preg) {
regfree((regex_t *)exp->preg);
free((regex_t *)exp->preg);
}
if (exp->replace && exp->action != ACT_SETBE)
free((char *)exp->replace);
expb = exp;
exp = exp->next;
free(expb);
}
/* build a list of unique uri_auths */
if (!ua)
ua = p->uri_auth;
else {
/* check if p->uri_auth is unique */
for (uap = ua; uap; uap=uap->next)
if (uap == p->uri_auth)
break;
if (!uap && p->uri_auth) {
/* add it, if it is */
p->uri_auth->next = ua;
ua = p->uri_auth;
}
}
list_for_each_entry_safe(acl, aclb, &p->acl, list) {
LIST_DEL(&acl->list);
prune_acl(acl);
free(acl);
}
list_for_each_entry_safe(rule, ruleb, &p->switching_rules, list) {
LIST_DEL(&rule->list);
prune_acl_cond(rule->cond);
free(rule->cond);
free(rule);
}
list_for_each_entry_safe(rdr, rdrb, &p->redirect_rules, list) {
LIST_DEL(&rdr->list);
if (rdr->cond) {
prune_acl_cond(rdr->cond);
free(rdr->cond);
}
free(rdr->rdr_str);
free(rdr);
}
free(p->appsession_name);
h = p->req_cap;
while (h) {
h_next = h->next;
free(h->name);
pool_destroy2(h->pool);
free(h);
h = h_next;
}/* end while(h) */
h = p->rsp_cap;
while (h) {
h_next = h->next;
free(h->name);
pool_destroy2(h->pool);
free(h);
h = h_next;
}/* end while(h) */
s = p->srv;
while (s) {
s_next = s->next;
if (s->check) {
task_delete(s->check);
task_free(s->check);
}
free(s->id);
free(s->cookie);
free(s);
s = s_next;
}/* end while(s) */
l = p->listen;
while (l) {
l_next = l->next;
free(l->name);
free(l->counters);
free(l);
l = l_next;
}/* end while(l) */
free(p->desc);
free(p->fwdfor_hdr_name);
req_acl_free(&p->req_acl);
pool_destroy2(p->req_cap_pool);
pool_destroy2(p->rsp_cap_pool);
pool_destroy2(p->hdr_idx_pool);
p0 = p;
p = p->next;
free(p0);
}/* end while(p) */
while (ua) {
uap = ua;
ua = ua->next;
free(uap->uri_prefix);
free(uap->auth_realm);
free(uap->node);
free(uap->desc);
userlist_free(uap->userlist);
req_acl_free(&uap->req_acl);
free(uap);
}
userlist_free(userlist);
protocol_unbind_all();
free(global.chroot); global.chroot = NULL;
free(global.pidfile); global.pidfile = NULL;
free(global.node); global.node = NULL;
free(global.desc); global.desc = NULL;
free(fdtab); fdtab = NULL;
free(oldpids); oldpids = NULL;
list_for_each_entry_safe(wl, wlb, &cfg_cfgfiles, list) {
LIST_DEL(&wl->list);
free(wl);
}
pool_destroy2(pool2_session);
pool_destroy2(pool2_buffer);
pool_destroy2(pool2_requri);
pool_destroy2(pool2_task);
pool_destroy2(pool2_capture);
pool_destroy2(pool2_appsess);
pool_destroy2(pool2_pendconn);
if (have_appsession) {
pool_destroy2(apools.serverid);
pool_destroy2(apools.sessid);
}
deinit_pollers();
} /* end deinit() */
/* sends the signal <sig> to all pids found in <oldpids> */
static void tell_old_pids(int sig)
{
int p;
for (p = 0; p < nb_oldpids; p++)
kill(oldpids[p], sig);
}
/*
* Runs the polling loop
*
* FIXME:
* - we still use 'listeners' to check whether we want to stop or not.
*
*/
void run_poll_loop()
{
int next;
tv_update_date(0,1);
while (1) {
/* check if we caught some signals and process them */
signal_process_queue();
/* Check if we can expire some tasks */
wake_expired_tasks(&next);
/* Process a few tasks */
process_runnable_tasks(&next);
/* maintain all proxies in a consistent state. This should quickly
* become a task because it becomes expensive when there are huge
* numbers of proxies. */
maintain_proxies(&next);
/* stop when there's no connection left and we don't allow them anymore */
if (!actconn && listeners == 0)
break;
/* The poller will ensure it returns around <next> */
cur_poller.poll(&cur_poller, next);
}
}
int main(int argc, char **argv)
{
int err, retry;
struct rlimit limit;
FILE *pidfile = NULL;
init(argc, argv);
signal_register(SIGQUIT, dump);
signal_register(SIGUSR1, sig_soft_stop);
signal_register(SIGHUP, sig_dump_state);
#ifdef DEBUG_MEMORY
signal_register(SIGINT, sig_int);
signal_register(SIGTERM, sig_term);
#endif
/* on very high loads, a sigpipe sometimes happen just between the
* getsockopt() which tells "it's OK to write", and the following write :-(
*/
#if !MSG_NOSIGNAL || defined(CONFIG_HAP_LINUX_SPLICE)
signal(SIGPIPE, SIG_IGN);
#endif
/* We will loop at most 100 times with 10 ms delay each time.
* That's at most 1 second. We only send a signal to old pids
* if we cannot grab at least one port.
*/
retry = MAX_START_RETRIES;
err = ERR_NONE;
while (retry >= 0) {
struct timeval w;
err = start_proxies(retry == 0 || nb_oldpids == 0);
/* exit the loop on no error or fatal error */
if ((err & (ERR_RETRYABLE|ERR_FATAL)) != ERR_RETRYABLE)
break;
if (nb_oldpids == 0)
break;
/* FIXME-20060514: Solaris and OpenBSD do not support shutdown() on
* listening sockets. So on those platforms, it would be wiser to
* simply send SIGUSR1, which will not be undoable.
*/
tell_old_pids(SIGTTOU);
/* give some time to old processes to stop listening */
w.tv_sec = 0;
w.tv_usec = 10*1000;
select(0, NULL, NULL, NULL, &w);
retry--;
}
/* Note: start_proxies() sends an alert when it fails. */
if ((err & ~ERR_WARN) != ERR_NONE) {
if (retry != MAX_START_RETRIES && nb_oldpids) {
protocol_unbind_all(); /* cleanup everything we can */
tell_old_pids(SIGTTIN);
}
exit(1);
}
if (listeners == 0) {
Alert("[%s.main()] No enabled listener found (check the <listen> keywords) ! Exiting.\n", argv[0]);
/* Note: we don't have to send anything to the old pids because we
* never stopped them. */
exit(1);
}
if ((protocol_bind_all() & ~ERR_WARN) != ERR_NONE) {
Alert("[%s.main()] Some protocols failed to start their listeners! Exiting.\n", argv[0]);
protocol_unbind_all(); /* cleanup everything we can */
if (nb_oldpids)
tell_old_pids(SIGTTIN);
exit(1);
}
/* prepare pause/play signals */
signal_register(SIGTTOU, sig_pause);
signal_register(SIGTTIN, sig_listen);
/* MODE_QUIET can inhibit alerts and warnings below this line */
global.mode &= ~MODE_STARTING;
if ((global.mode & MODE_QUIET) && !(global.mode & MODE_VERBOSE)) {
/* detach from the tty */
fclose(stdin); fclose(stdout); fclose(stderr);
}
/* open log & pid files before the chroot */
if (global.mode & MODE_DAEMON && global.pidfile != NULL) {
int pidfd;
unlink(global.pidfile);
pidfd = open(global.pidfile, O_CREAT | O_WRONLY | O_TRUNC, 0644);
if (pidfd < 0) {
Alert("[%s.main()] Cannot create pidfile %s\n", argv[0], global.pidfile);
if (nb_oldpids)
tell_old_pids(SIGTTIN);
protocol_unbind_all();
exit(1);
}
pidfile = fdopen(pidfd, "w");
}
/* ulimits */
if (!global.rlimit_nofile)
global.rlimit_nofile = global.maxsock;
if (global.rlimit_nofile) {
limit.rlim_cur = limit.rlim_max = global.rlimit_nofile;
if (setrlimit(RLIMIT_NOFILE, &limit) == -1) {
Warning("[%s.main()] Cannot raise FD limit to %d.\n", argv[0], global.rlimit_nofile);
}
}
if (global.rlimit_memmax) {
limit.rlim_cur = limit.rlim_max =
global.rlimit_memmax * 1048576 / global.nbproc;
#ifdef RLIMIT_AS
if (setrlimit(RLIMIT_AS, &limit) == -1) {
Warning("[%s.main()] Cannot fix MEM limit to %d megs.\n",
argv[0], global.rlimit_memmax);
}
#else
if (setrlimit(RLIMIT_DATA, &limit) == -1) {
Warning("[%s.main()] Cannot fix MEM limit to %d megs.\n",
argv[0], global.rlimit_memmax);
}
#endif
}
#ifdef CONFIG_HAP_CTTPROXY
if (global.last_checks & LSTCHK_CTTPROXY) {
int ret;
ret = check_cttproxy_version();
if (ret < 0) {
Alert("[%s.main()] Cannot enable cttproxy.\n%s",
argv[0],
(ret == -1) ? " Incorrect module version.\n"
: " Make sure you have enough permissions and that the module is loaded.\n");
protocol_unbind_all();
exit(1);
}
}
#endif
if ((global.last_checks & LSTCHK_NETADM) && global.uid) {
Alert("[%s.main()] Some configuration options require full privileges, so global.uid cannot be changed.\n"
"", argv[0]);
protocol_unbind_all();
exit(1);
}
/* If the user is not root, we'll still let him try the configuration
* but we inform him that unexpected behaviour may occur.
*/
if ((global.last_checks & LSTCHK_NETADM) && getuid())
Warning("[%s.main()] Some options which require full privileges"
" might not work well.\n"
"", argv[0]);
/* chroot if needed */
if (global.chroot != NULL) {
if (chroot(global.chroot) == -1) {
Alert("[%s.main()] Cannot chroot(%s).\n", argv[0], global.chroot);
if (nb_oldpids)
tell_old_pids(SIGTTIN);
protocol_unbind_all();
exit(1);
}
chdir("/");
}
if (nb_oldpids)
tell_old_pids(oldpids_sig);
/* Note that any error at this stage will be fatal because we will not
* be able to restart the old pids.
*/
/* setgid / setuid */
if (global.gid && setgid(global.gid) == -1) {
Alert("[%s.main()] Cannot set gid %d.\n", argv[0], global.gid);
protocol_unbind_all();
exit(1);
}
if (global.uid && setuid(global.uid) == -1) {
Alert("[%s.main()] Cannot set uid %d.\n", argv[0], global.uid);
protocol_unbind_all();
exit(1);
}
/* check ulimits */
limit.rlim_cur = limit.rlim_max = 0;
getrlimit(RLIMIT_NOFILE, &limit);
if (limit.rlim_cur < global.maxsock) {
Warning("[%s.main()] FD limit (%d) too low for maxconn=%d/maxsock=%d. Please raise 'ulimit-n' to %d or more to avoid any trouble.\n",
argv[0], (int)limit.rlim_cur, global.maxconn, global.maxsock, global.maxsock);
}
if (global.mode & MODE_DAEMON) {
struct proxy *px;
int ret = 0;
int proc;
/* the father launches the required number of processes */
for (proc = 0; proc < global.nbproc; proc++) {
ret = fork();
if (ret < 0) {
Alert("[%s.main()] Cannot fork.\n", argv[0]);
protocol_unbind_all();
exit(1); /* there has been an error */
}
else if (ret == 0) /* child breaks here */
break;
if (pidfile != NULL) {
fprintf(pidfile, "%d\n", ret);
fflush(pidfile);
}
relative_pid++; /* each child will get a different one */
}
/* close the pidfile both in children and father */
if (pidfile != NULL)
fclose(pidfile);
free(global.pidfile);
global.pidfile = NULL;
/* we might have to unbind some proxies from some processes */
px = proxy;
while (px != NULL) {
if (px->bind_proc && px->state != PR_STSTOPPED) {
if (!(px->bind_proc & (1 << proc)))
stop_proxy(px);
}
px = px->next;
}
if (proc == global.nbproc)
exit(0); /* parent must leave */
/* if we're NOT in QUIET mode, we should now close the 3 first FDs to ensure
* that we can detach from the TTY. We MUST NOT do it in other cases since
* it would have already be done, and 0-2 would have been affected to listening
* sockets
*/
if (!(global.mode & MODE_QUIET) || (global.mode & MODE_VERBOSE)) {
/* detach from the tty */
fclose(stdin); fclose(stdout); fclose(stderr);
global.mode &= ~MODE_VERBOSE;
global.mode |= MODE_QUIET; /* ensure that we won't say anything from now */
}
pid = getpid(); /* update child's pid */
setsid();
fork_poller();
}
protocol_enable_all();
/*
* That's it : the central polling loop. Run until we stop.
*/
run_poll_loop();
/* Free all Hash Keys and all Hash elements */
appsession_cleanup();
/* Do some cleanup */
deinit();
exit(0);
}
/*
* Local variables:
* c-indent-level: 8
* c-basic-offset: 8
* End:
*/