blob: 9aacb9b7a45fc1fe1cf7d2491c523e752eabbd35 [file] [log] [blame]
/*
* Copyright (C) 2013-2015 Willy Tarreau <w@1wt.eu>
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <inttypes.h>
#include <stdio.h>
#include <string.h>
#include <import/slz.h>
#include <import/slz-tables.h>
/* First, RFC1951-specific declarations and extracts from the RFC.
*
* RFC1951 - deflate stream format
* Data elements are packed into bytes in order of
increasing bit number within the byte, i.e., starting
with the least-significant bit of the byte.
* Data elements other than Huffman codes are packed
starting with the least-significant bit of the data
element.
* Huffman codes are packed starting with the most-
significant bit of the code.
3.2.3. Details of block format
Each block of compressed data begins with 3 header bits
containing the following data:
first bit BFINAL
next 2 bits BTYPE
Note that the header bits do not necessarily begin on a byte
boundary, since a block does not necessarily occupy an integral
number of bytes.
BFINAL is set if and only if this is the last block of the data
set.
BTYPE specifies how the data are compressed, as follows:
00 - no compression
01 - compressed with fixed Huffman codes
10 - compressed with dynamic Huffman codes
11 - reserved (error)
3.2.4. Non-compressed blocks (BTYPE=00)
Any bits of input up to the next byte boundary are ignored.
The rest of the block consists of the following information:
0 1 2 3 4...
+---+---+---+---+================================+
| LEN | NLEN |... LEN bytes of literal data...|
+---+---+---+---+================================+
LEN is the number of data bytes in the block. NLEN is the
one's complement of LEN.
3.2.5. Compressed blocks (length and distance codes)
As noted above, encoded data blocks in the "deflate" format
consist of sequences of symbols drawn from three conceptually
distinct alphabets: either literal bytes, from the alphabet of
byte values (0..255), or <length, backward distance> pairs,
where the length is drawn from (3..258) and the distance is
drawn from (1..32,768). In fact, the literal and length
alphabets are merged into a single alphabet (0..285), where
values 0..255 represent literal bytes, the value 256 indicates
end-of-block, and values 257..285 represent length codes
(possibly in conjunction with extra bits following the symbol
code) as follows:
Length encoding :
Extra Extra Extra
Code Bits Length(s) Code Bits Lengths Code Bits Length(s)
---- ---- ------ ---- ---- ------- ---- ---- -------
257 0 3 267 1 15,16 277 4 67-82
258 0 4 268 1 17,18 278 4 83-98
259 0 5 269 2 19-22 279 4 99-114
260 0 6 270 2 23-26 280 4 115-130
261 0 7 271 2 27-30 281 5 131-162
262 0 8 272 2 31-34 282 5 163-194
263 0 9 273 3 35-42 283 5 195-226
264 0 10 274 3 43-50 284 5 227-257
265 1 11,12 275 3 51-58 285 0 258
266 1 13,14 276 3 59-66
Distance encoding :
Extra Extra Extra
Code Bits Dist Code Bits Dist Code Bits Distance
---- ---- ---- ---- ---- ------ ---- ---- --------
0 0 1 10 4 33-48 20 9 1025-1536
1 0 2 11 4 49-64 21 9 1537-2048
2 0 3 12 5 65-96 22 10 2049-3072
3 0 4 13 5 97-128 23 10 3073-4096
4 1 5,6 14 6 129-192 24 11 4097-6144
5 1 7,8 15 6 193-256 25 11 6145-8192
6 2 9-12 16 7 257-384 26 12 8193-12288
7 2 13-16 17 7 385-512 27 12 12289-16384
8 3 17-24 18 8 513-768 28 13 16385-24576
9 3 25-32 19 8 769-1024 29 13 24577-32768
3.2.6. Compression with fixed Huffman codes (BTYPE=01)
The Huffman codes for the two alphabets are fixed, and are not
represented explicitly in the data. The Huffman code lengths
for the literal/length alphabet are:
Lit Value Bits Codes
--------- ---- -----
0 - 143 8 00110000 through
10111111
144 - 255 9 110010000 through
111111111
256 - 279 7 0000000 through
0010111
280 - 287 8 11000000 through
11000111
The code lengths are sufficient to generate the actual codes,
as described above; we show the codes in the table for added
clarity. Literal/length values 286-287 will never actually
occur in the compressed data, but participate in the code
construction.
Distance codes 0-31 are represented by (fixed-length) 5-bit
codes, with possible additional bits as shown in the table
shown in Paragraph 3.2.5, above. Note that distance codes 30-
31 will never actually occur in the compressed data.
*/
/* back references, built in a way that is optimal for 32/64 bits */
union ref {
struct {
uint32_t pos;
uint32_t word;
} by32;
uint64_t by64;
};
#if defined(USE_64BIT_QUEUE) && defined(UNALIGNED_LE_OK)
/* enqueue code x of <xbits> bits (LSB aligned, at most 24) and copy complete
* 32-bit words into output buffer. X must not contain non-zero bits above
* xbits.
*/
static inline void enqueue24(struct slz_stream *strm, uint32_t x, uint32_t xbits)
{
uint64_t queue = strm->queue + ((uint64_t)x << strm->qbits);
uint32_t qbits = strm->qbits + xbits;
if (__builtin_expect(qbits >= 32, 1)) {
*(uint32_t *)strm->outbuf = queue;
queue >>= 32;
qbits -= 32;
strm->outbuf += 4;
}
strm->queue = queue;
strm->qbits = qbits;
}
#define enqueue8 enqueue24
/* flush the queue and align to next byte */
static inline void flush_bits(struct slz_stream *strm)
{
if (strm->qbits > 0)
*strm->outbuf++ = strm->queue;
if (strm->qbits > 8)
*strm->outbuf++ = strm->queue >> 8;
if (strm->qbits > 16)
*strm->outbuf++ = strm->queue >> 16;
if (strm->qbits > 24)
*strm->outbuf++ = strm->queue >> 24;
strm->queue = 0;
strm->qbits = 0;
}
#else /* non-64 bit or aligned or big endian */
/* enqueue code x of <xbits> bits (LSB aligned, at most 24) and copy complete
* bytes into out buf. X must not contain non-zero bits above xbits. Prefer
* enqueue8() when xbits is known for being 8 or less.
*/
static void enqueue24(struct slz_stream *strm, uint32_t x, uint32_t xbits)
{
uint32_t queue = strm->queue + (x << strm->qbits);
uint32_t qbits = strm->qbits + xbits;
if (qbits >= 16) {
#ifndef UNALIGNED_LE_OK
strm->outbuf[0] = queue;
strm->outbuf[1] = queue >> 8;
#else
*(uint16_t *)strm->outbuf = queue;
#endif
strm->outbuf += 2;
queue >>= 16;
qbits -= 16;
}
if (qbits >= 8) {
qbits -= 8;
*strm->outbuf++ = queue;
queue >>= 8;
}
strm->qbits = qbits;
strm->queue = queue;
return;
}
/* enqueue code x of <xbits> bits (at most 8) and copy complete bytes into
* out buf. X must not contain non-zero bits above xbits.
*/
static inline void enqueue8(struct slz_stream *strm, uint32_t x, uint32_t xbits)
{
uint32_t queue = strm->queue + (x << strm->qbits);
uint32_t qbits = strm->qbits + xbits;
if (__builtin_expect((signed)(qbits - 8) >= 0, 1)) {
qbits -= 8;
*strm->outbuf++ = queue;
queue >>= 8;
}
strm->qbits = qbits;
strm->queue = queue;
}
/* align to next byte */
static inline void flush_bits(struct slz_stream *strm)
{
if (strm->qbits > 0)
*strm->outbuf++ = strm->queue;
if (strm->qbits > 8)
*strm->outbuf++ = strm->queue >> 8;
strm->queue = 0;
strm->qbits = 0;
}
#endif
/* only valid if buffer is already aligned */
static inline void copy_8b(struct slz_stream *strm, uint32_t x)
{
*strm->outbuf++ = x;
}
/* only valid if buffer is already aligned */
static inline void copy_16b(struct slz_stream *strm, uint32_t x)
{
strm->outbuf[0] = x;
strm->outbuf[1] = x >> 8;
strm->outbuf += 2;
}
/* only valid if buffer is already aligned */
static inline void copy_32b(struct slz_stream *strm, uint32_t x)
{
strm->outbuf[0] = x;
strm->outbuf[1] = x >> 8;
strm->outbuf[2] = x >> 16;
strm->outbuf[3] = x >> 24;
strm->outbuf += 4;
}
static inline void send_huff(struct slz_stream *strm, uint32_t code)
{
uint32_t bits;
code = fixed_huff[code];
bits = code & 15;
code >>= 4;
enqueue24(strm, code, bits);
}
static inline void send_eob(struct slz_stream *strm)
{
enqueue8(strm, 0, 7); // direct encoding of 256 = EOB (cf RFC1951)
}
/* copies <len> literals from <buf>. <more> indicates that there are data past
* buf + <len>. <len> must not be null.
*/
static void copy_lit(struct slz_stream *strm, const void *buf, uint32_t len, int more)
{
uint32_t len2;
do {
len2 = len;
if (__builtin_expect(len2 > 65535, 0))
len2 = 65535;
len -= len2;
if (strm->state != SLZ_ST_EOB)
send_eob(strm);
strm->state = (more || len) ? SLZ_ST_EOB : SLZ_ST_DONE;
enqueue8(strm, !(more || len), 3); // BFINAL = !more ; BTYPE = 00
flush_bits(strm);
copy_16b(strm, len2); // len2
copy_16b(strm, ~len2); // nlen2
memcpy(strm->outbuf, buf, len2);
buf += len2;
strm->outbuf += len2;
} while (len);
}
/* copies <len> literals from <buf>. <more> indicates that there are data past
* buf + <len>. <len> must not be null.
*/
static void copy_lit_huff(struct slz_stream *strm, const unsigned char *buf, uint32_t len, int more)
{
uint32_t pos;
/* This ugly construct limits the mount of tests and optimizes for the
* most common case (more > 0).
*/
if (strm->state == SLZ_ST_EOB) {
eob:
strm->state = more ? SLZ_ST_FIXED : SLZ_ST_LAST;
enqueue8(strm, 2 + !more, 3); // BFINAL = !more ; BTYPE = 01
}
else if (!more) {
send_eob(strm);
goto eob;
}
pos = 0;
do {
send_huff(strm, buf[pos++]);
} while (pos < len);
}
/* format:
* bit0..31 = word
* bit32..63 = last position in buffer of similar content
*/
/* This hash provides good average results on HTML contents, and is among the
* few which provide almost optimal results on various different pages.
*/
static inline uint32_t slz_hash(uint32_t a)
{
#if defined(__ARM_FEATURE_CRC32)
__asm__ volatile("crc32w %w0,%w0,%w1" : "+r"(a) : "r"(0));
return a >> (32 - HASH_BITS);
#else
return ((a << 19) + (a << 6) - a) >> (32 - HASH_BITS);
#endif
}
/* This function compares buffers <a> and <b> and reads 32 or 64 bits at a time
* during the approach. It makes us of unaligned little endian memory accesses
* on capable architectures. <max> is the maximum number of bytes that can be
* read, so both <a> and <b> must have at least <max> bytes ahead. <max> may
* safely be null or negative if that simplifies computations in the caller.
*/
static inline long memmatch(const unsigned char *a, const unsigned char *b, long max)
{
long len = 0;
#ifdef UNALIGNED_LE_OK
unsigned long xor;
while (1) {
if ((long)(len + 2 * sizeof(long)) > max) {
while (len < max) {
if (a[len] != b[len])
break;
len++;
}
return len;
}
xor = *(long *)&a[len] ^ *(long *)&b[len];
if (xor)
break;
len += sizeof(long);
xor = *(long *)&a[len] ^ *(long *)&b[len];
if (xor)
break;
len += sizeof(long);
}
#if defined(__x86_64__) || defined(__i386__) || defined(__i486__) || defined(__i586__) || defined(__i686__)
/* x86 has bsf. We know that xor is non-null here */
asm("bsf %1,%0\n" : "=r"(xor) : "0" (xor));
return len + xor / 8;
#else
if (sizeof(long) > 4 && !(xor & 0xffffffff)) {
/* This code is optimized out on 32-bit archs, but we still
* need to shift in two passes to avoid a warning. It is
* properly optimized out as a single shift.
*/
xor >>= 16; xor >>= 16;
if (xor & 0xffff) {
if (xor & 0xff)
return len + 4;
return len + 5;
}
if (xor & 0xffffff)
return len + 6;
return len + 7;
}
if (xor & 0xffff) {
if (xor & 0xff)
return len;
return len + 1;
}
if (xor & 0xffffff)
return len + 2;
return len + 3;
#endif // x86
#else // UNALIGNED_LE_OK
/* This is the generic version for big endian or unaligned-incompatible
* architectures.
*/
while (len < max) {
if (a[len] != b[len])
break;
len++;
}
return len;
#endif
}
/* sets <count> BYTES to -32769 in <refs> so that any uninitialized entry will
* verify (pos-last-1 >= 32768) and be ignored. <count> must be a multiple of
* 128 bytes and <refs> must be at least one count in length. It's supposed to
* be applied to 64-bit aligned data exclusively, which makes it slightly
* faster than the regular memset() since no alignment check is performed.
*/
void reset_refs(union ref *refs, long count)
{
/* avoid a shift/mask by casting to void* */
union ref *end = (void *)refs + count;
do {
refs[ 0].by64 = -32769;
refs[ 1].by64 = -32769;
refs[ 2].by64 = -32769;
refs[ 3].by64 = -32769;
refs[ 4].by64 = -32769;
refs[ 5].by64 = -32769;
refs[ 6].by64 = -32769;
refs[ 7].by64 = -32769;
refs[ 8].by64 = -32769;
refs[ 9].by64 = -32769;
refs[10].by64 = -32769;
refs[11].by64 = -32769;
refs[12].by64 = -32769;
refs[13].by64 = -32769;
refs[14].by64 = -32769;
refs[15].by64 = -32769;
refs += 16;
} while (refs < end);
}
/* Compresses <ilen> bytes from <in> into <out> according to RFC1951. The
* output result may be up to 5 bytes larger than the input, to which 2 extra
* bytes may be added to send the last chunk due to BFINAL+EOB encoding (10
* bits) when <more> is not set. The caller is responsible for ensuring there
* is enough room in the output buffer for this. The amount of output bytes is
* returned, and no CRC is computed.
*/
long slz_rfc1951_encode(struct slz_stream *strm, unsigned char *out, const unsigned char *in, long ilen, int more)
{
long rem = ilen;
unsigned long pos = 0;
unsigned long last;
uint32_t word = 0;
long mlen;
uint32_t h;
uint64_t ent;
uint32_t plit = 0;
uint32_t bit9 = 0;
uint32_t dist, code;
union ref refs[1 << HASH_BITS];
if (!strm->level) {
/* force to send as literals (eg to preserve CPU) */
strm->outbuf = out;
plit = pos = ilen;
bit9 = 52; /* force literal dump */
goto final_lit_dump;
}
reset_refs(refs, sizeof(refs));
strm->outbuf = out;
#ifndef UNALIGNED_FASTER
word = ((unsigned char)in[pos] << 8) + ((unsigned char)in[pos + 1] << 16) + ((unsigned char)in[pos + 2] << 24);
#endif
while (rem >= 4) {
#ifndef UNALIGNED_FASTER
word = ((unsigned char)in[pos + 3] << 24) + (word >> 8);
#else
word = *(uint32_t *)&in[pos];
#endif
h = slz_hash(word);
asm volatile ("" ::); // prevent gcc from trying to be smart with the prefetch
if (sizeof(long) >= 8) {
ent = refs[h].by64;
last = (uint32_t)ent;
ent >>= 32;
refs[h].by64 = ((uint64_t)pos) + ((uint64_t)word << 32);
} else {
ent = refs[h].by32.word;
last = refs[h].by32.pos;
refs[h].by32.pos = pos;
refs[h].by32.word = word;
}
#ifdef FIND_OPTIMAL_MATCH
/* Experimental code to see what could be saved with an ideal
* longest match lookup algorithm. This one is very slow but
* scans the whole window. In short, here are the savings :
* file orig fast(ratio) optimal(ratio)
* README 5185 3419 (65.9%) 3165 (61.0%) -7.5%
* index.html 76799 35662 (46.4%) 29875 (38.9%) -16.3%
* rfc1952.c 29383 13442 (45.7%) 11793 (40.1%) -12.3%
*
* Thus the savings to expect for large files is at best 16%.
*
* A non-colliding hash gives 33025 instead of 35662 (-7.4%),
* and keeping the last two entries gives 31724 (-11.0%).
*/
unsigned long scan;
int saved = 0;
int bestpos = 0;
int bestlen = 0;
int firstlen = 0;
int max_lookup = 2; // 0 = no limit
for (scan = pos - 1; scan < pos && (unsigned long)(pos - scan - 1) < 32768; scan--) {
if (*(uint32_t *)(in + scan) != word)
continue;
len = memmatch(in + pos, in + scan, rem);
if (!bestlen)
firstlen = len;
if (len > bestlen) {
bestlen = len;
bestpos = scan;
}
if (!--max_lookup)
break;
}
if (bestlen) {
//printf("pos=%d last=%d bestpos=%d word=%08x ent=%08x len=%d\n",
// (int)pos, (int)last, (int)bestpos, (int)word, (int)ent, bestlen);
last = bestpos;
ent = word;
saved += bestlen - firstlen;
}
//fprintf(stderr, "first=%d best=%d saved_total=%d\n", firstlen, bestlen, saved);
#endif
if ((uint32_t)ent != word) {
send_as_lit:
rem--;
plit++;
bit9 += ((unsigned char)word >= 144);
pos++;
continue;
}
/* We reject pos = last and pos > last+32768 */
if ((unsigned long)(pos - last - 1) >= 32768)
goto send_as_lit;
/* Note: cannot encode a length larger than 258 bytes */
mlen = memmatch(in + pos + 4, in + last + 4, (rem > 258 ? 258 : rem) - 4) + 4;
/* found a matching entry */
if (bit9 >= 52 && mlen < 6)
goto send_as_lit;
/* compute the output code, its size and the length's size in
* bits to know if the reference is cheaper than literals.
*/
code = len_fh[mlen];
/* direct mapping of dist->huffman code */
dist = fh_dist_table[pos - last - 1];
/* if encoding the dist+length is more expensive than sending
* the equivalent as bytes, lets keep the literals.
*/
if ((dist & 0x1f) + (code >> 16) + 8 >= 8 * mlen + bit9)
goto send_as_lit;
/* first, copy pending literals */
if (plit) {
/* Huffman encoding requires 9 bits for octets 144..255, so this
* is a waste of space for binary data. Switching between Huffman
* and no-comp then huffman consumes 52 bits (7 for EOB + 3 for
* block type + 7 for alignment + 32 for LEN+NLEN + 3 for next
* block. Only use plain literals if there are more than 52 bits
* to save then.
*/
if (bit9 >= 52)
copy_lit(strm, in + pos - plit, plit, 1);
else
copy_lit_huff(strm, in + pos - plit, plit, 1);
plit = 0;
}
/* use mode 01 - fixed huffman */
if (strm->state == SLZ_ST_EOB) {
strm->state = SLZ_ST_FIXED;
enqueue8(strm, 0x02, 3); // BTYPE = 01, BFINAL = 0
}
/* copy the length first */
enqueue24(strm, code & 0xFFFF, code >> 16);
/* in fixed huffman mode, dist is fixed 5 bits */
enqueue24(strm, dist >> 5, dist & 0x1f);
bit9 = 0;
rem -= mlen;
pos += mlen;
#ifndef UNALIGNED_FASTER
#ifdef UNALIGNED_LE_OK
word = *(uint32_t *)&in[pos - 1];
#else
word = ((unsigned char)in[pos] << 8) + ((unsigned char)in[pos + 1] << 16) + ((unsigned char)in[pos + 2] << 24);
#endif
#endif
}
if (__builtin_expect(rem, 0)) {
/* we're reading the 1..3 last bytes */
plit += rem;
do {
bit9 += ((unsigned char)in[pos++] >= 144);
} while (--rem);
}
final_lit_dump:
/* now copy remaining literals or mark the end */
if (plit) {
if (bit9 >= 52)
copy_lit(strm, in + pos - plit, plit, more);
else
copy_lit_huff(strm, in + pos - plit, plit, more);
plit = 0;
}
strm->ilen += ilen;
return strm->outbuf - out;
}
/* Initializes stream <strm> for use with raw deflate (rfc1951). The CRC is
* unused but set to zero. The compression level passed in <level> is set. This
* value can only be 0 (no compression) or 1 (compression) and other values
* will lead to unpredictable behaviour. The function always returns 0.
*/
int slz_rfc1951_init(struct slz_stream *strm, int level)
{
strm->state = SLZ_ST_EOB; // no header
strm->level = level;
strm->format = SLZ_FMT_DEFLATE;
strm->crc32 = 0;
strm->ilen = 0;
strm->qbits = 0;
strm->queue = 0;
return 0;
}
/* Flushes any pending for stream <strm> into buffer <buf>, then sends BTYPE=1
* and BFINAL=1 if needed. The stream ends in SLZ_ST_DONE. It returns the number
* of bytes emitted. The trailer consists in flushing the possibly pending bits
* from the queue (up to 7 bits), then possibly EOB (7 bits), then 3 bits, EOB,
* a rounding to the next byte, which amounts to a total of 4 bytes max, that
* the caller must ensure are available before calling the function.
*/
int slz_rfc1951_finish(struct slz_stream *strm, unsigned char *buf)
{
strm->outbuf = buf;
if (strm->state == SLZ_ST_FIXED || strm->state == SLZ_ST_LAST) {
strm->state = (strm->state == SLZ_ST_LAST) ? SLZ_ST_DONE : SLZ_ST_EOB;
send_eob(strm);
}
if (strm->state != SLZ_ST_DONE) {
/* send BTYPE=1, BFINAL=1 */
enqueue8(strm, 3, 3);
send_eob(strm);
strm->state = SLZ_ST_DONE;
}
flush_bits(strm);
return strm->outbuf - buf;
}
/* Now RFC1952-specific declarations and extracts from RFC.
* From RFC1952 about the GZIP file format :
A gzip file consists of a series of "members" ...
2.3. Member format
Each member has the following structure:
+---+---+---+---+---+---+---+---+---+---+
|ID1|ID2|CM |FLG| MTIME |XFL|OS | (more-->)
+---+---+---+---+---+---+---+---+---+---+
(if FLG.FEXTRA set)
+---+---+=================================+
| XLEN |...XLEN bytes of "extra field"...| (more-->)
+---+---+=================================+
(if FLG.FNAME set)
+=========================================+
|...original file name, zero-terminated...| (more-->)
+=========================================+
(if FLG.FCOMMENT set)
+===================================+
|...file comment, zero-terminated...| (more-->)
+===================================+
(if FLG.FHCRC set)
+---+---+
| CRC16 |
+---+---+
+=======================+
|...compressed blocks...| (more-->)
+=======================+
0 1 2 3 4 5 6 7
+---+---+---+---+---+---+---+---+
| CRC32 | ISIZE |
+---+---+---+---+---+---+---+---+
2.3.1. Member header and trailer
ID1 (IDentification 1)
ID2 (IDentification 2)
These have the fixed values ID1 = 31 (0x1f, \037), ID2 = 139
(0x8b, \213), to identify the file as being in gzip format.
CM (Compression Method)
This identifies the compression method used in the file. CM
= 0-7 are reserved. CM = 8 denotes the "deflate"
compression method, which is the one customarily used by
gzip and which is documented elsewhere.
FLG (FLaGs)
This flag byte is divided into individual bits as follows:
bit 0 FTEXT
bit 1 FHCRC
bit 2 FEXTRA
bit 3 FNAME
bit 4 FCOMMENT
bit 5 reserved
bit 6 reserved
bit 7 reserved
Reserved FLG bits must be zero.
MTIME (Modification TIME)
This gives the most recent modification time of the original
file being compressed. The time is in Unix format, i.e.,
seconds since 00:00:00 GMT, Jan. 1, 1970. (Note that this
may cause problems for MS-DOS and other systems that use
local rather than Universal time.) If the compressed data
did not come from a file, MTIME is set to the time at which
compression started. MTIME = 0 means no time stamp is
available.
XFL (eXtra FLags)
These flags are available for use by specific compression
methods. The "deflate" method (CM = 8) sets these flags as
follows:
XFL = 2 - compressor used maximum compression,
slowest algorithm
XFL = 4 - compressor used fastest algorithm
OS (Operating System)
This identifies the type of file system on which compression
took place. This may be useful in determining end-of-line
convention for text files. The currently defined values are
as follows:
0 - FAT filesystem (MS-DOS, OS/2, NT/Win32)
1 - Amiga
2 - VMS (or OpenVMS)
3 - Unix
4 - VM/CMS
5 - Atari TOS
6 - HPFS filesystem (OS/2, NT)
7 - Macintosh
8 - Z-System
9 - CP/M
10 - TOPS-20
11 - NTFS filesystem (NT)
12 - QDOS
13 - Acorn RISCOS
255 - unknown
==> A file compressed using "gzip -1" on Unix-like systems can be :
1F 8B 08 00 00 00 00 00 04 03
<deflate-compressed stream>
crc32 size32
*/
static const unsigned char gzip_hdr[] = { 0x1F, 0x8B, // ID1, ID2
0x08, 0x00, // Deflate, flags (none)
0x00, 0x00, 0x00, 0x00, // mtime: none
0x04, 0x03 }; // fastest comp, OS=Unix
static inline uint32_t crc32_char(uint32_t crc, uint8_t x)
{
#if defined(__ARM_FEATURE_CRC32)
crc = ~crc;
__asm__ volatile("crc32b %w0,%w0,%w1" : "+r"(crc) : "r"(x));
crc = ~crc;
#else
crc = crc32_fast[0][(crc ^ x) & 0xff] ^ (crc >> 8);
#endif
return crc;
}
static inline uint32_t crc32_uint32(uint32_t data)
{
#if defined(__ARM_FEATURE_CRC32)
__asm__ volatile("crc32w %w0,%w0,%w1" : "+r"(data) : "r"(~0UL));
data = ~data;
#else
data = crc32_fast[3][(data >> 0) & 0xff] ^
crc32_fast[2][(data >> 8) & 0xff] ^
crc32_fast[1][(data >> 16) & 0xff] ^
crc32_fast[0][(data >> 24) & 0xff];
#endif
return data;
}
/* Modified version originally from RFC1952, working with non-inverting CRCs */
uint32_t slz_crc32_by1(uint32_t crc, const unsigned char *buf, int len)
{
int n;
for (n = 0; n < len; n++)
crc = crc32_char(crc, buf[n]);
return crc;
}
/* This version computes the crc32 of <buf> over <len> bytes, doing most of it
* in 32-bit chunks.
*/
uint32_t slz_crc32_by4(uint32_t crc, const unsigned char *buf, int len)
{
const unsigned char *end = buf + len;
while (buf <= end - 16) {
#ifdef UNALIGNED_LE_OK
#if defined(__ARM_FEATURE_CRC32)
crc = ~crc;
__asm__ volatile("crc32w %w0,%w0,%w1" : "+r"(crc) : "r"(*(uint32_t*)(buf)));
__asm__ volatile("crc32w %w0,%w0,%w1" : "+r"(crc) : "r"(*(uint32_t*)(buf + 4)));
__asm__ volatile("crc32w %w0,%w0,%w1" : "+r"(crc) : "r"(*(uint32_t*)(buf + 8)));
__asm__ volatile("crc32w %w0,%w0,%w1" : "+r"(crc) : "r"(*(uint32_t*)(buf + 12)));
crc = ~crc;
#else
crc ^= *(uint32_t *)buf;
crc = crc32_uint32(crc);
crc ^= *(uint32_t *)(buf + 4);
crc = crc32_uint32(crc);
crc ^= *(uint32_t *)(buf + 8);
crc = crc32_uint32(crc);
crc ^= *(uint32_t *)(buf + 12);
crc = crc32_uint32(crc);
#endif
#else
crc = crc32_fast[3][(buf[0] ^ (crc >> 0)) & 0xff] ^
crc32_fast[2][(buf[1] ^ (crc >> 8)) & 0xff] ^
crc32_fast[1][(buf[2] ^ (crc >> 16)) & 0xff] ^
crc32_fast[0][(buf[3] ^ (crc >> 24)) & 0xff];
crc = crc32_fast[3][(buf[4] ^ (crc >> 0)) & 0xff] ^
crc32_fast[2][(buf[5] ^ (crc >> 8)) & 0xff] ^
crc32_fast[1][(buf[6] ^ (crc >> 16)) & 0xff] ^
crc32_fast[0][(buf[7] ^ (crc >> 24)) & 0xff];
crc = crc32_fast[3][(buf[8] ^ (crc >> 0)) & 0xff] ^
crc32_fast[2][(buf[9] ^ (crc >> 8)) & 0xff] ^
crc32_fast[1][(buf[10] ^ (crc >> 16)) & 0xff] ^
crc32_fast[0][(buf[11] ^ (crc >> 24)) & 0xff];
crc = crc32_fast[3][(buf[12] ^ (crc >> 0)) & 0xff] ^
crc32_fast[2][(buf[13] ^ (crc >> 8)) & 0xff] ^
crc32_fast[1][(buf[14] ^ (crc >> 16)) & 0xff] ^
crc32_fast[0][(buf[15] ^ (crc >> 24)) & 0xff];
#endif
buf += 16;
}
while (buf <= end - 4) {
#ifdef UNALIGNED_LE_OK
crc ^= *(uint32_t *)buf;
crc = crc32_uint32(crc);
#else
crc = crc32_fast[3][(buf[0] ^ (crc >> 0)) & 0xff] ^
crc32_fast[2][(buf[1] ^ (crc >> 8)) & 0xff] ^
crc32_fast[1][(buf[2] ^ (crc >> 16)) & 0xff] ^
crc32_fast[0][(buf[3] ^ (crc >> 24)) & 0xff];
#endif
buf += 4;
}
while (buf < end)
crc = crc32_char(crc, *buf++);
return crc;
}
/* uses the most suitable crc32 function to update crc on <buf, len> */
static inline uint32_t update_crc(uint32_t crc, const void *buf, int len)
{
return slz_crc32_by4(crc, buf, len);
}
/* Sends the gzip header for stream <strm> into buffer <buf>. When it's done,
* the stream state is updated to SLZ_ST_EOB. It returns the number of bytes
* emitted which is always 10. The caller is responsible for ensuring there's
* always enough room in the buffer.
*/
int slz_rfc1952_send_header(struct slz_stream *strm, unsigned char *buf)
{
memcpy(buf, gzip_hdr, sizeof(gzip_hdr));
strm->state = SLZ_ST_EOB;
return sizeof(gzip_hdr);
}
/* Encodes the block according to rfc1952. This means that the CRC of the input
* block is computed according to the CRC32 algorithm. If the header was never
* sent, it may be sent first. The number of output bytes is returned.
*/
long slz_rfc1952_encode(struct slz_stream *strm, unsigned char *out, const unsigned char *in, long ilen, int more)
{
long ret = 0;
if (__builtin_expect(strm->state == SLZ_ST_INIT, 0))
ret += slz_rfc1952_send_header(strm, out);
strm->crc32 = update_crc(strm->crc32, in, ilen);
ret += slz_rfc1951_encode(strm, out + ret, in, ilen, more);
return ret;
}
/* Initializes stream <strm> for use with the gzip format (rfc1952). The
* compression level passed in <level> is set. This value can only be 0 (no
* compression) or 1 (compression) and other values will lead to unpredictable
* behaviour. The function always returns 0.
*/
int slz_rfc1952_init(struct slz_stream *strm, int level)
{
strm->state = SLZ_ST_INIT;
strm->level = level;
strm->format = SLZ_FMT_GZIP;
strm->crc32 = 0;
strm->ilen = 0;
strm->qbits = 0;
strm->queue = 0;
return 0;
}
/* Flushes pending bits and sends the gzip trailer for stream <strm> into
* buffer <buf>. When it's done, the stream state is updated to SLZ_ST_END. It
* returns the number of bytes emitted. The trailer consists in flushing the
* possibly pending bits from the queue (up to 24 bits), rounding to the next
* byte, then 4 bytes for the CRC and another 4 bytes for the input length.
* That may about to 4+4+4 = 12 bytes, that the caller must ensure are
* available before calling the function. Note that if the initial header was
* never sent, it will be sent first as well (10 extra bytes).
*/
int slz_rfc1952_finish(struct slz_stream *strm, unsigned char *buf)
{
strm->outbuf = buf;
if (__builtin_expect(strm->state == SLZ_ST_INIT, 0))
strm->outbuf += slz_rfc1952_send_header(strm, strm->outbuf);
slz_rfc1951_finish(strm, strm->outbuf);
copy_32b(strm, strm->crc32);
copy_32b(strm, strm->ilen);
strm->state = SLZ_ST_END;
return strm->outbuf - buf;
}
/* RFC1950-specific stuff. This is for the Zlib stream format.
* From RFC1950 (zlib) :
*
2.2. Data format
A zlib stream has the following structure:
0 1
+---+---+
|CMF|FLG| (more-->)
+---+---+
(if FLG.FDICT set)
0 1 2 3
+---+---+---+---+
| DICTID | (more-->)
+---+---+---+---+
+=====================+---+---+---+---+
|...compressed data...| ADLER32 |
+=====================+---+---+---+---+
Any data which may appear after ADLER32 are not part of the zlib
stream.
CMF (Compression Method and flags)
This byte is divided into a 4-bit compression method and a 4-
bit information field depending on the compression method.
bits 0 to 3 CM Compression method
bits 4 to 7 CINFO Compression info
CM (Compression method)
This identifies the compression method used in the file. CM = 8
denotes the "deflate" compression method with a window size up
to 32K. This is the method used by gzip and PNG (see
references [1] and [2] in Chapter 3, below, for the reference
documents). CM = 15 is reserved. It might be used in a future
version of this specification to indicate the presence of an
extra field before the compressed data.
CINFO (Compression info)
For CM = 8, CINFO is the base-2 logarithm of the LZ77 window
size, minus eight (CINFO=7 indicates a 32K window size). Values
of CINFO above 7 are not allowed in this version of the
specification. CINFO is not defined in this specification for
CM not equal to 8.
FLG (FLaGs)
This flag byte is divided as follows:
bits 0 to 4 FCHECK (check bits for CMF and FLG)
bit 5 FDICT (preset dictionary)
bits 6 to 7 FLEVEL (compression level)
The FCHECK value must be such that CMF and FLG, when viewed as
a 16-bit unsigned integer stored in MSB order (CMF*256 + FLG),
is a multiple of 31.
FDICT (Preset dictionary)
If FDICT is set, a DICT dictionary identifier is present
immediately after the FLG byte. The dictionary is a sequence of
bytes which are initially fed to the compressor without
producing any compressed output. DICT is the Adler-32 checksum
of this sequence of bytes (see the definition of ADLER32
below). The decompressor can use this identifier to determine
which dictionary has been used by the compressor.
FLEVEL (Compression level)
These flags are available for use by specific compression
methods. The "deflate" method (CM = 8) sets these flags as
follows:
0 - compressor used fastest algorithm
1 - compressor used fast algorithm
2 - compressor used default algorithm
3 - compressor used maximum compression, slowest algorithm
The information in FLEVEL is not needed for decompression; it
is there to indicate if recompression might be worthwhile.
compressed data
For compression method 8, the compressed data is stored in the
deflate compressed data format as described in the document
"DEFLATE Compressed Data Format Specification" by L. Peter
Deutsch. (See reference [3] in Chapter 3, below)
Other compressed data formats are not specified in this version
of the zlib specification.
ADLER32 (Adler-32 checksum)
This contains a checksum value of the uncompressed data
(excluding any dictionary data) computed according to Adler-32
algorithm. This algorithm is a 32-bit extension and improvement
of the Fletcher algorithm, used in the ITU-T X.224 / ISO 8073
standard. See references [4] and [5] in Chapter 3, below)
Adler-32 is composed of two sums accumulated per byte: s1 is
the sum of all bytes, s2 is the sum of all s1 values. Both sums
are done modulo 65521. s1 is initialized to 1, s2 to zero. The
Adler-32 checksum is stored as s2*65536 + s1 in most-
significant-byte first (network) order.
==> The stream can start with only 2 bytes :
- CM = 0x78 : CMINFO=7 (32kB window), CM=8 (deflate)
- FLG = 0x01 : FLEVEL = 0 (fastest), FDICT=0 (no dict), FCHECK=1 so
that 0x7801 is a multiple of 31 (30721 = 991 * 31).
==> and it ends with only 4 bytes, the Adler-32 checksum in big-endian format.
*/
static const unsigned char zlib_hdr[] = { 0x78, 0x01 }; // 32k win, deflate, chk=1
/* Original version from RFC1950, verified and works OK */
uint32_t slz_adler32_by1(uint32_t crc, const unsigned char *buf, int len)
{
uint32_t s1 = crc & 0xffff;
uint32_t s2 = (crc >> 16) & 0xffff;
int n;
for (n = 0; n < len; n++) {
s1 = (s1 + buf[n]) % 65521;
s2 = (s2 + s1) % 65521;
}
return (s2 << 16) + s1;
}
/* Computes the adler32 sum on <buf> for <len> bytes. It avoids the expensive
* modulus by retrofitting the number of bytes missed between 65521 and 65536
* which is easy to count : For every sum above 65536, the modulus is offset
* by (65536-65521) = 15. So for any value, we can count the accumulated extra
* values by dividing the sum by 65536 and multiplying this value by
* (65536-65521). That's easier with a drawing with boxes and marbles. It gives
* this :
* x % 65521 = (x % 65536) + (x / 65536) * (65536 - 65521)
* = (x & 0xffff) + (x >> 16) * 15.
*/
uint32_t slz_adler32_block(uint32_t crc, const unsigned char *buf, long len)
{
long s1 = crc & 0xffff;
long s2 = (crc >> 16);
long blk;
long n;
do {
blk = len;
/* ensure we never overflow s2 (limit is about 2^((32-8)/2) */
if (blk > (1U << 12))
blk = 1U << 12;
len -= blk;
for (n = 0; n < blk; n++) {
s1 = (s1 + buf[n]);
s2 = (s2 + s1);
}
/* Largest value here is 2^12 * 255 = 1044480 < 2^20. We can
* still overflow once, but not twice because the right hand
* size is 225 max, so the total is 65761. However we also
* have to take care of the values between 65521 and 65536.
*/
s1 = (s1 & 0xffff) + 15 * (s1 >> 16);
if (s1 >= 65521)
s1 -= 65521;
/* For s2, the largest value is estimated to 2^32-1 for
* simplicity, so the right hand side is about 15*65535
* = 983025. We can overflow twice at most.
*/
s2 = (s2 & 0xffff) + 15 * (s2 >> 16);
s2 = (s2 & 0xffff) + 15 * (s2 >> 16);
if (s2 >= 65521)
s2 -= 65521;
buf += blk;
} while (len);
return (s2 << 16) + s1;
}
/* Sends the zlib header for stream <strm> into buffer <buf>. When it's done,
* the stream state is updated to SLZ_ST_EOB. It returns the number of bytes
* emitted which is always 2. The caller is responsible for ensuring there's
* always enough room in the buffer.
*/
int slz_rfc1950_send_header(struct slz_stream *strm, unsigned char *buf)
{
memcpy(buf, zlib_hdr, sizeof(zlib_hdr));
strm->state = SLZ_ST_EOB;
return sizeof(zlib_hdr);
}
/* Encodes the block according to rfc1950. This means that the CRC of the input
* block is computed according to the ADLER32 algorithm. If the header was never
* sent, it may be sent first. The number of output bytes is returned.
*/
long slz_rfc1950_encode(struct slz_stream *strm, unsigned char *out, const unsigned char *in, long ilen, int more)
{
long ret = 0;
if (__builtin_expect(strm->state == SLZ_ST_INIT, 0))
ret += slz_rfc1950_send_header(strm, out);
strm->crc32 = slz_adler32_block(strm->crc32, in, ilen);
ret += slz_rfc1951_encode(strm, out + ret, in, ilen, more);
return ret;
}
/* Initializes stream <strm> for use with the zlib format (rfc1952). The
* compression level passed in <level> is set. This value can only be 0 (no
* compression) or 1 (compression) and other values will lead to unpredictable
* behaviour. The function always returns 0.
*/
int slz_rfc1950_init(struct slz_stream *strm, int level)
{
strm->state = SLZ_ST_INIT;
strm->level = level;
strm->format = SLZ_FMT_ZLIB;
strm->crc32 = 1; // rfc1950/zlib starts with initial crc=1
strm->ilen = 0;
strm->qbits = 0;
strm->queue = 0;
return 0;
}
/* Flushes pending bits and sends the gzip trailer for stream <strm> into
* buffer <buf>. When it's done, the stream state is updated to SLZ_ST_END. It
* returns the number of bytes emitted. The trailer consists in flushing the
* possibly pending bits from the queue (up to 24 bits), rounding to the next
* byte, then 4 bytes for the CRC. That may about to 4+4 = 8 bytes, that the
* caller must ensure are available before calling the function. Note that if
* the initial header was never sent, it will be sent first as well (2 extra
* bytes).
*/
int slz_rfc1950_finish(struct slz_stream *strm, unsigned char *buf)
{
strm->outbuf = buf;
if (__builtin_expect(strm->state == SLZ_ST_INIT, 0))
strm->outbuf += slz_rfc1952_send_header(strm, strm->outbuf);
slz_rfc1951_finish(strm, strm->outbuf);
copy_8b(strm, (strm->crc32 >> 24) & 0xff);
copy_8b(strm, (strm->crc32 >> 16) & 0xff);
copy_8b(strm, (strm->crc32 >> 8) & 0xff);
copy_8b(strm, (strm->crc32 >> 0) & 0xff);
strm->state = SLZ_ST_END;
return strm->outbuf - buf;
}
__attribute__((constructor))
static void __slz_initialize(void)
{
#if !defined(__ARM_FEATURE_CRC32)
__slz_make_crc_table();
#endif
__slz_prepare_dist_table();
}