| /* |
| * HTTP/3 protocol processing |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation, version 2.1 |
| * exclusively. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <haproxy/buf.h> |
| #include <haproxy/connection.h> |
| #include <haproxy/dynbuf.h> |
| #include <haproxy/h3.h> |
| #include <haproxy/h3_stats.h> |
| #include <haproxy/http.h> |
| #include <haproxy/htx.h> |
| #include <haproxy/intops.h> |
| #include <haproxy/istbuf.h> |
| #include <haproxy/mux_quic.h> |
| #include <haproxy/pool.h> |
| #include <haproxy/qpack-dec.h> |
| #include <haproxy/qpack-enc.h> |
| #include <haproxy/quic_enc.h> |
| #include <haproxy/stconn.h> |
| #include <haproxy/tools.h> |
| #include <haproxy/trace.h> |
| #include <haproxy/xprt_quic.h> |
| |
| /* trace source and events */ |
| static void h3_trace(enum trace_level level, uint64_t mask, |
| const struct trace_source *src, |
| const struct ist where, const struct ist func, |
| const void *a1, const void *a2, const void *a3, const void *a4); |
| |
| static const struct trace_event h3_trace_events[] = { |
| #define H3_EV_RX_FRAME (1ULL << 0) |
| { .mask = H3_EV_RX_FRAME, .name = "rx_frame", .desc = "receipt of any H3 frame" }, |
| #define H3_EV_RX_DATA (1ULL << 1) |
| { .mask = H3_EV_RX_DATA, .name = "rx_data", .desc = "receipt of H3 DATA frame" }, |
| #define H3_EV_RX_HDR (1ULL << 2) |
| { .mask = H3_EV_RX_HDR, .name = "rx_hdr", .desc = "receipt of H3 HEADERS frame" }, |
| #define H3_EV_RX_SETTINGS (1ULL << 3) |
| { .mask = H3_EV_RX_SETTINGS, .name = "rx_settings", .desc = "receipt of H3 SETTINGS frame" }, |
| #define H3_EV_TX_DATA (1ULL << 4) |
| { .mask = H3_EV_TX_DATA, .name = "tx_data", .desc = "transmission of H3 DATA frame" }, |
| #define H3_EV_TX_HDR (1ULL << 5) |
| { .mask = H3_EV_TX_HDR, .name = "tx_hdr", .desc = "transmission of H3 HEADERS frame" }, |
| #define H3_EV_TX_SETTINGS (1ULL << 6) |
| { .mask = H3_EV_TX_SETTINGS, .name = "tx_settings", .desc = "transmission of H3 SETTINGS frame" }, |
| #define H3_EV_H3S_NEW (1ULL << 7) |
| { .mask = H3_EV_H3S_NEW, .name = "h3s_new", .desc = "new H3 stream" }, |
| #define H3_EV_H3S_END (1ULL << 8) |
| { .mask = H3_EV_H3S_END, .name = "h3s_end", .desc = "H3 stream terminated" }, |
| { } |
| }; |
| |
| static const struct name_desc h3_trace_lockon_args[4] = { |
| /* arg1 */ { /* already used by the connection */ }, |
| /* arg2 */ { .name="qcs", .desc="QUIC stream" }, |
| /* arg3 */ { }, |
| /* arg4 */ { } |
| }; |
| |
| static const struct name_desc h3_trace_decoding[] = { |
| #define H3_VERB_CLEAN 1 |
| { .name="clean", .desc="only user-friendly stuff, generally suitable for level \"user\"" }, |
| #define H3_VERB_MINIMAL 2 |
| { .name="minimal", .desc="report only qcc/qcs state and flags, no real decoding" }, |
| { /* end */ } |
| }; |
| |
| struct trace_source trace_h3 = { |
| .name = IST("h3"), |
| .desc = "HTTP/3 transcoder", |
| .arg_def = TRC_ARG1_CONN, /* TRACE()'s first argument is always a connection */ |
| .default_cb = h3_trace, |
| .known_events = h3_trace_events, |
| .lockon_args = h3_trace_lockon_args, |
| .decoding = h3_trace_decoding, |
| .report_events = ~0, /* report everything by default */ |
| }; |
| |
| #define TRACE_SOURCE &trace_h3 |
| INITCALL1(STG_REGISTER, trace_register_source, TRACE_SOURCE); |
| |
| #if defined(DEBUG_H3) |
| #define h3_debug_printf fprintf |
| #define h3_debug_hexdump debug_hexdump |
| #else |
| #define h3_debug_printf(...) do { } while (0) |
| #define h3_debug_hexdump(...) do { } while (0) |
| #endif |
| |
| #define H3_CF_SETTINGS_SENT 0x00000001 /* SETTINGS frame already sent on local control stream */ |
| #define H3_CF_SETTINGS_RECV 0x00000002 /* SETTINGS frame already received on remote control stream */ |
| #define H3_CF_UNI_CTRL_SET 0x00000004 /* Remote H3 Control stream opened */ |
| #define H3_CF_UNI_QPACK_DEC_SET 0x00000008 /* Remote QPACK decoder stream opened */ |
| #define H3_CF_UNI_QPACK_ENC_SET 0x00000010 /* Remote QPACK encoder stream opened */ |
| |
| /* Default settings */ |
| static uint64_t h3_settings_qpack_max_table_capacity = 0; |
| static uint64_t h3_settings_qpack_blocked_streams = 4096; |
| static uint64_t h3_settings_max_field_section_size = QUIC_VARINT_8_BYTE_MAX; /* Unlimited */ |
| |
| struct h3c { |
| struct qcc *qcc; |
| struct qcs *ctrl_strm; /* Control stream */ |
| enum h3_err err; |
| uint32_t flags; |
| |
| /* Settings */ |
| uint64_t qpack_max_table_capacity; |
| uint64_t qpack_blocked_streams; |
| uint64_t max_field_section_size; |
| |
| uint64_t id_goaway; /* stream ID used for a GOAWAY frame */ |
| |
| struct buffer_wait buf_wait; /* wait list for buffer allocations */ |
| /* Stats counters */ |
| struct h3_counters *prx_counters; |
| }; |
| |
| DECLARE_STATIC_POOL(pool_head_h3c, "h3c", sizeof(struct h3c)); |
| |
| #define H3_SF_UNI_INIT 0x00000001 /* stream type not parsed for unidirectional stream */ |
| #define H3_SF_UNI_NO_H3 0x00000002 /* unidirectional stream does not carry H3 frames */ |
| |
| struct h3s { |
| struct h3c *h3c; |
| |
| enum h3s_t type; |
| enum h3s_st_req st_req; /* only used for request streams */ |
| int demux_frame_len; |
| int demux_frame_type; |
| |
| int flags; |
| }; |
| |
| DECLARE_STATIC_POOL(pool_head_h3s, "h3s", sizeof(struct h3s)); |
| |
| /* Initialize an uni-stream <qcs> by reading its type from <b>. |
| * |
| * Returns the count of consumed bytes or a negative error code. |
| */ |
| static ssize_t h3_init_uni_stream(struct h3c *h3c, struct qcs *qcs, |
| struct buffer *b) |
| { |
| /* decode unidirectional stream type */ |
| struct h3s *h3s = qcs->ctx; |
| uint64_t type; |
| size_t len = 0, ret; |
| |
| TRACE_ENTER(H3_EV_H3S_NEW, qcs->qcc->conn, qcs); |
| |
| BUG_ON_HOT(!quic_stream_is_uni(qcs->id) || |
| h3s->flags & H3_SF_UNI_INIT); |
| |
| ret = b_quic_dec_int(&type, b, &len); |
| if (!ret) { |
| ABORT_NOW(); |
| } |
| |
| switch (type) { |
| case H3_UNI_S_T_CTRL: |
| if (h3c->flags & H3_CF_UNI_CTRL_SET) { |
| qcc_emit_cc_app(qcs->qcc, H3_STREAM_CREATION_ERROR, 1); |
| return -1; |
| } |
| h3c->flags |= H3_CF_UNI_CTRL_SET; |
| h3s->type = H3S_T_CTRL; |
| break; |
| |
| case H3_UNI_S_T_PUSH: |
| /* TODO not supported for the moment */ |
| h3s->type = H3S_T_PUSH; |
| break; |
| |
| case H3_UNI_S_T_QPACK_DEC: |
| if (h3c->flags & H3_CF_UNI_QPACK_DEC_SET) { |
| qcc_emit_cc_app(qcs->qcc, H3_STREAM_CREATION_ERROR, 1); |
| return -1; |
| } |
| h3c->flags |= H3_CF_UNI_QPACK_DEC_SET; |
| h3s->type = H3S_T_QPACK_DEC; |
| h3s->flags |= H3_SF_UNI_NO_H3; |
| break; |
| |
| case H3_UNI_S_T_QPACK_ENC: |
| if (h3c->flags & H3_CF_UNI_QPACK_ENC_SET) { |
| qcc_emit_cc_app(qcs->qcc, H3_STREAM_CREATION_ERROR, 1); |
| return -1; |
| } |
| h3c->flags |= H3_CF_UNI_QPACK_ENC_SET; |
| h3s->type = H3S_T_QPACK_ENC; |
| h3s->flags |= H3_SF_UNI_NO_H3; |
| break; |
| |
| default: |
| /* draft-ietf-quic-http34 9. Extensions to HTTP/3 |
| * |
| * Implementations MUST [...] abort reading on unidirectional |
| * streams that have unknown or unsupported types. |
| */ |
| qcs->flags |= QC_SF_READ_ABORTED; |
| return -1; |
| }; |
| |
| h3s->flags |= H3_SF_UNI_INIT; |
| |
| TRACE_LEAVE(H3_EV_H3S_NEW, qcs->qcc->conn, qcs); |
| return len; |
| } |
| |
| /* Parse a buffer <b> for a <qcs> uni-stream which does not contains H3 frames. |
| * This may be used for QPACK encoder/decoder streams for example. <fin> is set |
| * if this is the last frame of the stream. |
| * |
| * Returns the number of consumed bytes or a negative error code. |
| */ |
| static ssize_t h3_parse_uni_stream_no_h3(struct qcs *qcs, struct buffer *b, int fin) |
| { |
| struct h3s *h3s = qcs->ctx; |
| |
| BUG_ON_HOT(!quic_stream_is_uni(qcs->id) || |
| !(h3s->flags & H3_SF_UNI_NO_H3)); |
| |
| switch (h3s->type) { |
| case H3S_T_QPACK_DEC: |
| if (qpack_decode_dec(b, fin, qcs)) |
| return -1; |
| break; |
| case H3S_T_QPACK_ENC: |
| if (qpack_decode_enc(b, fin, qcs)) |
| return -1; |
| break; |
| case H3S_T_UNKNOWN: |
| default: |
| /* Unknown stream should be flagged with QC_SF_READ_ABORTED. */ |
| ABORT_NOW(); |
| } |
| |
| /* TODO adjust return code */ |
| return 0; |
| } |
| |
| /* Decode a H3 frame header from <rxbuf> buffer. The frame type is stored in |
| * <ftype> and length in <flen>. |
| * |
| * Returns the size of the H3 frame header. Note that the input buffer is not |
| * consumed. |
| */ |
| static inline size_t h3_decode_frm_header(uint64_t *ftype, uint64_t *flen, |
| struct buffer *b) |
| { |
| size_t hlen; |
| |
| hlen = 0; |
| if (!b_quic_dec_int(ftype, b, &hlen) || |
| !b_quic_dec_int(flen, b, &hlen)) { |
| return 0; |
| } |
| |
| return hlen; |
| } |
| |
| /* Check if H3 frame of type <ftype> is valid when received on stream <qcs>. |
| * |
| * Returns a boolean. If false, a connection error H3_FRAME_UNEXPECTED should |
| * be reported. |
| */ |
| static int h3_is_frame_valid(struct h3c *h3c, struct qcs *qcs, uint64_t ftype) |
| { |
| struct h3s *h3s = qcs->ctx; |
| const uint64_t id = qcs->id; |
| |
| BUG_ON_HOT(h3s->type == H3S_T_UNKNOWN); |
| |
| switch (ftype) { |
| case H3_FT_DATA: |
| return h3s->type != H3S_T_CTRL && (h3s->st_req == H3S_ST_REQ_HEADERS || |
| h3s->st_req == H3S_ST_REQ_DATA); |
| |
| case H3_FT_HEADERS: |
| return h3s->type != H3S_T_CTRL && h3s->st_req != H3S_ST_REQ_TRAILERS; |
| |
| case H3_FT_CANCEL_PUSH: |
| case H3_FT_GOAWAY: |
| case H3_FT_MAX_PUSH_ID: |
| /* Only allowed for control stream. First frame of control |
| * stream MUST be SETTINGS. |
| */ |
| return h3s->type == H3S_T_CTRL && |
| (h3c->flags & H3_CF_SETTINGS_RECV); |
| |
| case H3_FT_SETTINGS: |
| /* draft-ietf-quic-http34 7.2.4. SETTINGS |
| * |
| * If an endpoint receives a second SETTINGS frame on the control |
| * stream, the endpoint MUST respond with a connection error of type |
| * H3_FRAME_UNEXPECTED. |
| */ |
| return h3s->type == H3S_T_CTRL && |
| !(h3c->flags & H3_CF_SETTINGS_RECV); |
| |
| case H3_FT_PUSH_PROMISE: |
| return h3s->type != H3S_T_CTRL && |
| (id & QCS_ID_SRV_INTIATOR_BIT); |
| |
| default: |
| /* draft-ietf-quic-http34 9. Extensions to HTTP/3 |
| * |
| * Implementations MUST discard frames [...] that have unknown |
| * or unsupported types. |
| */ |
| return h3s->type != H3S_T_CTRL || (h3c->flags & H3_CF_SETTINGS_RECV); |
| } |
| } |
| |
| /* Parse from buffer <buf> a H3 HEADERS frame of length <len>. Data are copied |
| * in a local HTX buffer and transfer to the stream connector layer. <fin> must be |
| * set if this is the last data to transfer from this stream. |
| * |
| * Returns the number of consumed bytes or a negative error code. |
| */ |
| static ssize_t h3_headers_to_htx(struct qcs *qcs, const struct buffer *buf, |
| uint64_t len, char fin) |
| { |
| struct h3s *h3s = qcs->ctx; |
| struct h3c *h3c = h3s->h3c; |
| struct buffer htx_buf = BUF_NULL; |
| struct buffer *tmp = get_trash_chunk(); |
| struct htx *htx = NULL; |
| struct htx_sl *sl; |
| struct http_hdr list[global.tune.max_http_hdr]; |
| unsigned int flags = HTX_SL_F_NONE; |
| struct ist meth = IST_NULL, path = IST_NULL; |
| //struct ist scheme = IST_NULL, authority = IST_NULL; |
| struct ist authority = IST_NULL; |
| int hdr_idx, ret; |
| |
| TRACE_ENTER(H3_EV_RX_FRAME|H3_EV_RX_HDR, qcs->qcc->conn, qcs); |
| |
| /* TODO support trailer parsing in this function */ |
| |
| /* TODO support buffer wrapping */ |
| BUG_ON(b_head(buf) + len >= b_wrap(buf)); |
| ret = qpack_decode_fs((const unsigned char *)b_head(buf), len, tmp, |
| list, sizeof(list) / sizeof(list[0])); |
| if (ret < 0) { |
| TRACE_ERROR("QPACK decoding error", H3_EV_RX_FRAME|H3_EV_RX_HDR, qcs->qcc->conn, qcs); |
| h3c->err = -ret; |
| return -1; |
| } |
| |
| qc_get_buf(qcs, &htx_buf); |
| BUG_ON(!b_size(&htx_buf)); |
| htx = htx_from_buf(&htx_buf); |
| |
| /* first treat pseudo-header to build the start line */ |
| hdr_idx = 0; |
| while (1) { |
| if (isteq(list[hdr_idx].n, ist(""))) |
| break; |
| |
| if (istmatch(list[hdr_idx].n, ist(":"))) { |
| /* pseudo-header */ |
| if (isteq(list[hdr_idx].n, ist(":method"))) |
| meth = list[hdr_idx].v; |
| else if (isteq(list[hdr_idx].n, ist(":path"))) |
| path = list[hdr_idx].v; |
| //else if (isteq(list[hdr_idx].n, ist(":scheme"))) |
| // scheme = list[hdr_idx].v; |
| else if (isteq(list[hdr_idx].n, ist(":authority"))) |
| authority = list[hdr_idx].v; |
| } |
| |
| ++hdr_idx; |
| } |
| |
| flags |= HTX_SL_F_VER_11; |
| flags |= HTX_SL_F_XFER_LEN; |
| |
| sl = htx_add_stline(htx, HTX_BLK_REQ_SL, flags, meth, path, ist("HTTP/3.0")); |
| if (!sl) { |
| h3c->err = H3_INTERNAL_ERROR; |
| return -1; |
| } |
| |
| if (fin) |
| sl->flags |= HTX_SL_F_BODYLESS; |
| |
| sl->info.req.meth = find_http_meth(meth.ptr, meth.len); |
| |
| if (isttest(authority)) |
| htx_add_header(htx, ist("host"), authority); |
| |
| /* now treat standard headers */ |
| hdr_idx = 0; |
| while (1) { |
| if (isteq(list[hdr_idx].n, ist(""))) |
| break; |
| |
| if (!istmatch(list[hdr_idx].n, ist(":"))) |
| htx_add_header(htx, list[hdr_idx].n, list[hdr_idx].v); |
| |
| ++hdr_idx; |
| } |
| |
| htx_add_endof(htx, HTX_BLK_EOH); |
| htx_to_buf(htx, &htx_buf); |
| |
| if (fin) |
| htx->flags |= HTX_FL_EOM; |
| |
| if (!qc_attach_sc(qcs, &htx_buf)) { |
| h3c->err = H3_INTERNAL_ERROR; |
| return -1; |
| } |
| |
| /* RFC 9114 5.2. Connection Shutdown |
| * |
| * The GOAWAY frame contains an identifier that |
| * indicates to the receiver the range of requests or pushes that were |
| * or might be processed in this connection. The server sends a client- |
| * initiated bidirectional stream ID; the client sends a push ID. |
| * Requests or pushes with the indicated identifier or greater are |
| * rejected (Section 4.1.1) by the sender of the GOAWAY. This |
| * identifier MAY be zero if no requests or pushes were processed. |
| */ |
| if (qcs->id >= h3c->id_goaway) |
| h3c->id_goaway = qcs->id + 4; |
| |
| /* buffer is transferred to the stream connector and set to NULL |
| * except on stream creation error. |
| */ |
| b_free(&htx_buf); |
| offer_buffers(NULL, 1); |
| |
| TRACE_LEAVE(H3_EV_RX_FRAME|H3_EV_RX_HDR, qcs->qcc->conn, qcs); |
| return len; |
| } |
| |
| /* Copy from buffer <buf> a H3 DATA frame of length <len> in QUIC stream <qcs> |
| * HTX buffer. <fin> must be set if this is the last data to transfer from this |
| * stream. |
| * |
| * Returns the number of consumed bytes or a negative error code. |
| */ |
| static ssize_t h3_data_to_htx(struct qcs *qcs, const struct buffer *buf, |
| uint64_t len, char fin) |
| { |
| struct buffer *appbuf; |
| struct htx *htx = NULL; |
| size_t htx_sent = 0; |
| int htx_space; |
| char *head; |
| |
| TRACE_ENTER(H3_EV_RX_FRAME|H3_EV_RX_DATA, qcs->qcc->conn, qcs); |
| |
| appbuf = qc_get_buf(qcs, &qcs->rx.app_buf); |
| BUG_ON(!appbuf); |
| htx = htx_from_buf(appbuf); |
| |
| if (len > b_data(buf)) { |
| len = b_data(buf); |
| fin = 0; |
| } |
| |
| head = b_head(buf); |
| retry: |
| htx_space = htx_free_data_space(htx); |
| if (!htx_space) { |
| qcs->flags |= QC_SF_DEM_FULL; |
| goto out; |
| } |
| |
| if (len > htx_space) { |
| len = htx_space; |
| fin = 0; |
| } |
| |
| if (head + len > b_wrap(buf)) { |
| size_t contig = b_wrap(buf) - head; |
| htx_sent = htx_add_data(htx, ist2(b_head(buf), contig)); |
| if (htx_sent < contig) { |
| qcs->flags |= QC_SF_DEM_FULL; |
| goto out; |
| } |
| |
| len -= contig; |
| head = b_orig(buf); |
| goto retry; |
| } |
| |
| htx_sent += htx_add_data(htx, ist2(head, len)); |
| if (htx_sent < len) { |
| qcs->flags |= QC_SF_DEM_FULL; |
| goto out; |
| } |
| |
| if (fin && len == htx_sent) |
| htx->flags |= HTX_FL_EOM; |
| |
| out: |
| htx_to_buf(htx, appbuf); |
| |
| TRACE_LEAVE(H3_EV_RX_FRAME|H3_EV_RX_DATA, qcs->qcc->conn, qcs); |
| return htx_sent; |
| } |
| |
| /* Parse a SETTINGS frame of length <len> of payload <buf>. |
| * |
| * Returns the number of consumed bytes or a negative error code. |
| */ |
| static ssize_t h3_parse_settings_frm(struct h3c *h3c, const struct buffer *buf, |
| size_t len) |
| { |
| struct buffer b; |
| uint64_t id, value; |
| size_t ret = 0; |
| long mask = 0; /* used to detect duplicated settings identifier */ |
| |
| TRACE_ENTER(H3_EV_RX_FRAME|H3_EV_RX_SETTINGS, h3c->qcc->conn); |
| |
| /* Work on a copy of <buf>. */ |
| b = b_make(b_orig(buf), b_size(buf), b_head_ofs(buf), len); |
| |
| while (b_data(&b)) { |
| if (!b_quic_dec_int(&id, &b, &ret) || !b_quic_dec_int(&value, &b, &ret)) { |
| h3c->err = H3_FRAME_ERROR; |
| return -1; |
| } |
| |
| h3_debug_printf(stderr, "%s id: %llu value: %llu\n", |
| __func__, (unsigned long long)id, (unsigned long long)value); |
| |
| /* draft-ietf-quic-http34 7.2.4. SETTINGS |
| * |
| * The same setting identifier MUST NOT occur more than once in the |
| * SETTINGS frame. A receiver MAY treat the presence of duplicate |
| * setting identifiers as a connection error of type H3_SETTINGS_ERROR. |
| */ |
| |
| /* Ignore duplicate check for ID too big used for GREASE. */ |
| if (id < sizeof(mask)) { |
| if (ha_bit_test(id, &mask)) { |
| h3c->err = H3_SETTINGS_ERROR; |
| return -1; |
| } |
| ha_bit_set(id, &mask); |
| } |
| |
| switch (id) { |
| case H3_SETTINGS_QPACK_MAX_TABLE_CAPACITY: |
| h3c->qpack_max_table_capacity = value; |
| break; |
| case H3_SETTINGS_MAX_FIELD_SECTION_SIZE: |
| h3c->max_field_section_size = value; |
| break; |
| case H3_SETTINGS_QPACK_BLOCKED_STREAMS: |
| h3c->qpack_blocked_streams = value; |
| break; |
| |
| case H3_SETTINGS_RESERVED_0: |
| case H3_SETTINGS_RESERVED_2: |
| case H3_SETTINGS_RESERVED_3: |
| case H3_SETTINGS_RESERVED_4: |
| case H3_SETTINGS_RESERVED_5: |
| /* draft-ietf-quic-http34 7.2.4.1. Defined SETTINGS Parameters |
| * |
| * Setting identifiers which were defined in [HTTP2] where there is no |
| * corresponding HTTP/3 setting have also been reserved |
| * (Section 11.2.2). These reserved settings MUST NOT be sent, and |
| * their receipt MUST be treated as a connection error of type |
| * H3_SETTINGS_ERROR. |
| */ |
| h3c->err = H3_SETTINGS_ERROR; |
| return -1; |
| default: |
| /* MUST be ignored */ |
| break; |
| } |
| } |
| |
| TRACE_LEAVE(H3_EV_RX_FRAME|H3_EV_RX_SETTINGS); |
| return ret; |
| } |
| |
| /* Decode <qcs> remotely initiated bidi-stream. <fin> must be set to indicate |
| * that we received the last data of the stream. |
| * |
| * Returns 0 on success else non-zero. |
| */ |
| static ssize_t h3_decode_qcs(struct qcs *qcs, struct buffer *b, int fin) |
| { |
| struct h3s *h3s = qcs->ctx; |
| struct h3c *h3c = h3s->h3c; |
| ssize_t total = 0, ret; |
| |
| h3_debug_printf(stderr, "%s: STREAM ID: %lu\n", __func__, qcs->id); |
| if (!b_data(b)) |
| return 0; |
| |
| if (quic_stream_is_uni(qcs->id) && !(h3s->flags & H3_SF_UNI_INIT)) { |
| if ((ret = h3_init_uni_stream(h3c, qcs, b)) < 0) |
| return -1; |
| |
| total += ret; |
| } |
| |
| if (quic_stream_is_uni(qcs->id) && (h3s->flags & H3_SF_UNI_NO_H3)) { |
| /* For non-h3 STREAM, parse it and return immediately. */ |
| if ((ret = h3_parse_uni_stream_no_h3(qcs, b, fin)) < 0) |
| return -1; |
| |
| total += ret; |
| return total; |
| } |
| |
| /* RFC 9114 6.2.1. Control Streams |
| * |
| * The sender MUST NOT close the control stream, and the receiver MUST NOT |
| * request that the sender close the control stream. If either control |
| * stream is closed at any point, this MUST be treated as a connection |
| * error of type H3_CLOSED_CRITICAL_STREAM. |
| */ |
| if (h3s->type == H3S_T_CTRL && fin) { |
| qcc_emit_cc_app(qcs->qcc, H3_CLOSED_CRITICAL_STREAM, 1); |
| return -1; |
| } |
| |
| while (b_data(b) && !(qcs->flags & QC_SF_DEM_FULL)) { |
| uint64_t ftype, flen; |
| char last_stream_frame = 0; |
| |
| /* Work on a copy of <rxbuf> */ |
| if (!h3s->demux_frame_len) { |
| size_t hlen = h3_decode_frm_header(&ftype, &flen, b); |
| if (!hlen) |
| break; |
| |
| h3_debug_printf(stderr, "%s: ftype: %lu, flen: %lu\n", |
| __func__, ftype, flen); |
| |
| h3s->demux_frame_type = ftype; |
| h3s->demux_frame_len = flen; |
| total += hlen; |
| |
| if (!h3_is_frame_valid(h3c, qcs, ftype)) { |
| qcc_emit_cc_app(qcs->qcc, H3_FRAME_UNEXPECTED, 1); |
| return -1; |
| } |
| |
| if (!b_data(b)) |
| break; |
| } |
| |
| flen = h3s->demux_frame_len; |
| ftype = h3s->demux_frame_type; |
| |
| /* Do not demux incomplete frames except H3 DATA which can be |
| * fragmented in multiple HTX blocks. |
| */ |
| if (flen > b_data(b) && ftype != H3_FT_DATA) { |
| /* Reject frames bigger than bufsize. |
| * |
| * TODO HEADERS should in complement be limited with H3 |
| * SETTINGS_MAX_FIELD_SECTION_SIZE parameter to prevent |
| * excessive decompressed size. |
| */ |
| if (flen > QC_S_RX_BUF_SZ) { |
| qcc_emit_cc_app(qcs->qcc, H3_EXCESSIVE_LOAD, 1); |
| return -1; |
| } |
| break; |
| } |
| |
| last_stream_frame = (fin && flen == b_data(b)); |
| |
| h3_inc_frame_type_cnt(h3c->prx_counters, ftype); |
| switch (ftype) { |
| case H3_FT_DATA: |
| ret = h3_data_to_htx(qcs, b, flen, last_stream_frame); |
| /* TODO handle error reporting. Stream closure required. */ |
| if (ret < 0) { ABORT_NOW(); } |
| h3s->st_req = H3S_ST_REQ_DATA; |
| break; |
| case H3_FT_HEADERS: |
| ret = h3_headers_to_htx(qcs, b, flen, last_stream_frame); |
| if (ret < 0) { |
| /* TODO for some error, it may be preferable to |
| * only close the stream once RESET_STREAM is |
| * supported. |
| */ |
| qcc_emit_cc_app(qcs->qcc, h3c->err, 1); |
| return -1; |
| } |
| h3s->st_req = (h3s->st_req == H3S_ST_REQ_BEFORE) ? |
| H3S_ST_REQ_HEADERS : H3S_ST_REQ_TRAILERS; |
| break; |
| case H3_FT_CANCEL_PUSH: |
| case H3_FT_PUSH_PROMISE: |
| case H3_FT_MAX_PUSH_ID: |
| case H3_FT_GOAWAY: |
| /* Not supported */ |
| ret = flen; |
| break; |
| case H3_FT_SETTINGS: |
| ret = h3_parse_settings_frm(qcs->qcc->ctx, b, flen); |
| if (ret < 0) { |
| qcc_emit_cc_app(qcs->qcc, h3c->err, 1); |
| return -1; |
| } |
| h3c->flags |= H3_CF_SETTINGS_RECV; |
| break; |
| default: |
| /* draft-ietf-quic-http34 9. Extensions to HTTP/3 |
| * |
| * Implementations MUST discard frames [...] that have unknown |
| * or unsupported types. |
| */ |
| h3_debug_printf(stderr, "ignore unknown frame type 0x%lx\n", ftype); |
| ret = flen; |
| break; |
| } |
| |
| if (ret) { |
| BUG_ON(h3s->demux_frame_len < ret); |
| h3s->demux_frame_len -= ret; |
| b_del(b, ret); |
| total += ret; |
| } |
| } |
| |
| /* TODO may be useful to wakeup the MUX if blocked due to full buffer. |
| * However, currently, io-cb of MUX does not handle Rx. |
| */ |
| |
| return total; |
| } |
| |
| /* Returns buffer for data sending. |
| * May be NULL if the allocation failed. |
| */ |
| static struct buffer *mux_get_buf(struct qcs *qcs) |
| { |
| if (!b_size(&qcs->tx.buf)) |
| b_alloc(&qcs->tx.buf); |
| |
| return &qcs->tx.buf; |
| } |
| |
| /* Function used to emit stream data from <qcs> control uni-stream */ |
| static int h3_control_send(struct qcs *qcs, void *ctx) |
| { |
| int ret; |
| struct h3c *h3c = ctx; |
| unsigned char data[(2 + 3) * 2 * QUIC_VARINT_MAX_SIZE]; /* enough for 3 settings */ |
| struct buffer pos, *res; |
| size_t frm_len; |
| |
| TRACE_ENTER(H3_EV_TX_SETTINGS, qcs->qcc->conn, qcs); |
| |
| BUG_ON_HOT(h3c->flags & H3_CF_SETTINGS_SENT); |
| |
| ret = 0; |
| pos = b_make((char *)data, sizeof(data), 0, 0); |
| |
| frm_len = quic_int_getsize(H3_SETTINGS_QPACK_MAX_TABLE_CAPACITY) + |
| quic_int_getsize(h3_settings_qpack_max_table_capacity) + |
| quic_int_getsize(H3_SETTINGS_QPACK_BLOCKED_STREAMS) + |
| quic_int_getsize(h3_settings_qpack_blocked_streams); |
| if (h3_settings_max_field_section_size) { |
| frm_len += quic_int_getsize(H3_SETTINGS_MAX_FIELD_SECTION_SIZE) + |
| quic_int_getsize(h3_settings_max_field_section_size); |
| } |
| |
| b_quic_enc_int(&pos, H3_UNI_S_T_CTRL); |
| /* Build a SETTINGS frame */ |
| b_quic_enc_int(&pos, H3_FT_SETTINGS); |
| b_quic_enc_int(&pos, frm_len); |
| b_quic_enc_int(&pos, H3_SETTINGS_QPACK_MAX_TABLE_CAPACITY); |
| b_quic_enc_int(&pos, h3_settings_qpack_max_table_capacity); |
| b_quic_enc_int(&pos, H3_SETTINGS_QPACK_BLOCKED_STREAMS); |
| b_quic_enc_int(&pos, h3_settings_qpack_blocked_streams); |
| if (h3_settings_max_field_section_size) { |
| b_quic_enc_int(&pos, H3_SETTINGS_MAX_FIELD_SECTION_SIZE); |
| b_quic_enc_int(&pos, h3_settings_max_field_section_size); |
| } |
| |
| res = mux_get_buf(qcs); |
| if (b_room(res) < b_data(&pos)) { |
| // TODO the mux should be put in blocked state, with |
| // the stream in state waiting for settings to be sent |
| ABORT_NOW(); |
| } |
| |
| ret = b_force_xfer(res, &pos, b_data(&pos)); |
| if (ret > 0) { |
| h3c->flags |= H3_CF_SETTINGS_SENT; |
| if (!(qcs->qcc->wait_event.events & SUB_RETRY_SEND)) |
| tasklet_wakeup(qcs->qcc->wait_event.tasklet); |
| } |
| |
| TRACE_LEAVE(H3_EV_TX_SETTINGS, qcs->qcc->conn, qcs); |
| return ret; |
| } |
| |
| static int h3_resp_headers_send(struct qcs *qcs, struct htx *htx) |
| { |
| struct buffer outbuf; |
| struct buffer headers_buf = BUF_NULL; |
| struct buffer *res; |
| struct http_hdr list[global.tune.max_http_hdr]; |
| struct htx_sl *sl; |
| struct htx_blk *blk; |
| enum htx_blk_type type; |
| int frame_length_size; /* size in bytes of frame length varint field */ |
| int ret = 0; |
| int hdr; |
| int status = 0; |
| |
| TRACE_ENTER(H3_EV_TX_HDR, qcs->qcc->conn, qcs); |
| |
| sl = NULL; |
| hdr = 0; |
| for (blk = htx_get_head_blk(htx); blk; blk = htx_get_next_blk(htx, blk)) { |
| type = htx_get_blk_type(blk); |
| |
| if (type == HTX_BLK_UNUSED) |
| continue; |
| |
| if (type == HTX_BLK_EOH) |
| break; |
| |
| if (type == HTX_BLK_RES_SL) { |
| /* start-line -> HEADERS h3 frame */ |
| BUG_ON(sl); |
| sl = htx_get_blk_ptr(htx, blk); |
| /* TODO should be on h3 layer */ |
| status = sl->info.res.status; |
| } |
| else if (type == HTX_BLK_HDR) { |
| if (unlikely(hdr >= sizeof(list) / sizeof(list[0]) - 1)) |
| goto err; |
| list[hdr].n = htx_get_blk_name(htx, blk); |
| list[hdr].v = htx_get_blk_value(htx, blk); |
| hdr++; |
| } |
| else { |
| ABORT_NOW(); |
| goto err; |
| } |
| } |
| |
| BUG_ON(!sl); |
| |
| list[hdr].n = ist(""); |
| |
| res = mux_get_buf(qcs); |
| |
| /* At least 5 bytes to store frame type + length as a varint max size */ |
| if (b_room(res) < 5) |
| ABORT_NOW(); |
| |
| b_reset(&outbuf); |
| outbuf = b_make(b_tail(res), b_contig_space(res), 0, 0); |
| /* Start the headers after frame type + length */ |
| headers_buf = b_make(b_head(res) + 5, b_size(res) - 5, 0, 0); |
| |
| if (qpack_encode_field_section_line(&headers_buf)) |
| ABORT_NOW(); |
| if (qpack_encode_int_status(&headers_buf, status)) |
| ABORT_NOW(); |
| |
| for (hdr = 0; hdr < sizeof(list) / sizeof(list[0]); ++hdr) { |
| if (isteq(list[hdr].n, ist(""))) |
| break; |
| |
| /* draft-ietf-quic-http34 4.1. HTTP Message Exchanges |
| * Transfer codings (see Section 6.1 of [HTTP11]) are not |
| * defined for HTTP/3; the Transfer-Encoding header field MUST |
| * NOT be used. |
| */ |
| if (isteq(list[hdr].n, ist("transfer-encoding"))) |
| continue; |
| |
| if (qpack_encode_header(&headers_buf, list[hdr].n, list[hdr].v)) |
| ABORT_NOW(); |
| } |
| |
| /* Now that all headers are encoded, we are certain that res buffer is |
| * big enough |
| */ |
| frame_length_size = quic_int_getsize(b_data(&headers_buf)); |
| res->head += 4 - frame_length_size; |
| b_putchr(res, 0x01); /* h3 HEADERS frame type */ |
| if (!b_quic_enc_int(res, b_data(&headers_buf))) |
| ABORT_NOW(); |
| b_add(res, b_data(&headers_buf)); |
| |
| ret = 0; |
| blk = htx_get_head_blk(htx); |
| while (blk) { |
| type = htx_get_blk_type(blk); |
| ret += htx_get_blksz(blk); |
| blk = htx_remove_blk(htx, blk); |
| if (type == HTX_BLK_EOH) |
| break; |
| } |
| |
| TRACE_LEAVE(H3_EV_TX_HDR, qcs->qcc->conn, qcs); |
| return ret; |
| |
| err: |
| TRACE_DEVEL("leaving on error", H3_EV_TX_HDR, qcs->qcc->conn, qcs); |
| return 0; |
| } |
| |
| /* Returns the total of bytes sent. */ |
| static int h3_resp_data_send(struct qcs *qcs, struct buffer *buf, size_t count) |
| { |
| struct buffer outbuf; |
| struct buffer *res; |
| size_t total = 0; |
| struct htx *htx; |
| int bsize, fsize, hsize; |
| struct htx_blk *blk; |
| enum htx_blk_type type; |
| |
| TRACE_ENTER(H3_EV_TX_DATA, qcs->qcc->conn, qcs); |
| |
| htx = htx_from_buf(buf); |
| |
| new_frame: |
| if (!count || htx_is_empty(htx)) |
| goto end; |
| |
| blk = htx_get_head_blk(htx); |
| type = htx_get_blk_type(blk); |
| fsize = bsize = htx_get_blksz(blk); |
| |
| if (type != HTX_BLK_DATA) |
| goto end; |
| |
| res = mux_get_buf(qcs); |
| |
| if (fsize > count) |
| fsize = count; |
| |
| /* h3 DATA headers : 1-byte frame type + varint frame length */ |
| hsize = 1 + QUIC_VARINT_MAX_SIZE; |
| |
| while (1) { |
| b_reset(&outbuf); |
| outbuf = b_make(b_tail(res), b_contig_space(res), 0, 0); |
| if (b_size(&outbuf) > hsize || !b_space_wraps(res)) |
| break; |
| b_slow_realign(res, trash.area, b_data(res)); |
| } |
| |
| /* Not enough room for headers and at least one data byte, block the |
| * stream. It is expected that the stream connector layer will subscribe |
| * on SEND. |
| */ |
| if (b_size(&outbuf) <= hsize) { |
| qcs->flags |= QC_SF_BLK_MROOM; |
| goto end; |
| } |
| |
| if (b_size(&outbuf) < hsize + fsize) |
| fsize = b_size(&outbuf) - hsize; |
| BUG_ON(fsize <= 0); |
| |
| b_putchr(&outbuf, 0x00); /* h3 frame type = DATA */ |
| b_quic_enc_int(&outbuf, fsize); /* h3 frame length */ |
| |
| b_putblk(&outbuf, htx_get_blk_ptr(htx, blk), fsize); |
| total += fsize; |
| count -= fsize; |
| |
| if (fsize == bsize) |
| htx_remove_blk(htx, blk); |
| else |
| htx_cut_data_blk(htx, blk, fsize); |
| |
| /* commit the buffer */ |
| b_add(res, b_data(&outbuf)); |
| goto new_frame; |
| |
| end: |
| TRACE_LEAVE(H3_EV_TX_DATA, qcs->qcc->conn, qcs); |
| return total; |
| } |
| |
| size_t h3_snd_buf(struct stconn *sc, struct buffer *buf, size_t count, int flags) |
| { |
| size_t total = 0; |
| struct qcs *qcs = __sc_mux_strm(sc); |
| struct htx *htx; |
| enum htx_blk_type btype; |
| struct htx_blk *blk; |
| uint32_t bsize; |
| int32_t idx; |
| int ret; |
| |
| h3_debug_printf(stderr, "%s\n", __func__); |
| |
| htx = htx_from_buf(buf); |
| |
| while (count && !htx_is_empty(htx) && !(qcs->flags & QC_SF_BLK_MROOM)) { |
| idx = htx_get_head(htx); |
| blk = htx_get_blk(htx, idx); |
| btype = htx_get_blk_type(blk); |
| bsize = htx_get_blksz(blk); |
| |
| /* Not implemented : QUIC on backend side */ |
| BUG_ON(btype == HTX_BLK_REQ_SL); |
| |
| switch (btype) { |
| case HTX_BLK_RES_SL: |
| /* start-line -> HEADERS h3 frame */ |
| ret = h3_resp_headers_send(qcs, htx); |
| if (ret > 0) { |
| total += ret; |
| count -= ret; |
| if (ret < bsize) |
| goto out; |
| } |
| break; |
| |
| case HTX_BLK_DATA: |
| ret = h3_resp_data_send(qcs, buf, count); |
| if (ret > 0) { |
| htx = htx_from_buf(buf); |
| total += ret; |
| count -= ret; |
| if (ret < bsize) |
| goto out; |
| } |
| break; |
| |
| case HTX_BLK_TLR: |
| case HTX_BLK_EOT: |
| /* TODO trailers */ |
| |
| default: |
| htx_remove_blk(htx, blk); |
| total += bsize; |
| count -= bsize; |
| break; |
| } |
| } |
| |
| if ((htx->flags & HTX_FL_EOM) && htx_is_empty(htx)) |
| qcs->flags |= QC_SF_FIN_STREAM; |
| |
| out: |
| if (total) { |
| if (!(qcs->qcc->wait_event.events & SUB_RETRY_SEND)) |
| tasklet_wakeup(qcs->qcc->wait_event.tasklet); |
| } |
| |
| return total; |
| } |
| |
| static int h3_attach(struct qcs *qcs, void *conn_ctx) |
| { |
| struct h3s *h3s; |
| |
| TRACE_ENTER(H3_EV_H3S_NEW, qcs->qcc->conn, qcs); |
| |
| h3s = pool_alloc(pool_head_h3s); |
| if (!h3s) |
| return 1; |
| |
| qcs->ctx = h3s; |
| h3s->h3c = conn_ctx; |
| |
| h3s->demux_frame_len = 0; |
| h3s->demux_frame_type = 0; |
| h3s->flags = 0; |
| |
| if (quic_stream_is_bidi(qcs->id)) { |
| h3s->type = H3S_T_REQ; |
| h3s->st_req = H3S_ST_REQ_BEFORE; |
| qcs_wait_http_req(qcs); |
| } |
| else { |
| /* stream type must be decoded for unidirectional streams */ |
| h3s->type = H3S_T_UNKNOWN; |
| } |
| |
| TRACE_LEAVE(H3_EV_H3S_NEW, qcs->qcc->conn, qcs); |
| return 0; |
| } |
| |
| static void h3_detach(struct qcs *qcs) |
| { |
| struct h3s *h3s = qcs->ctx; |
| |
| TRACE_ENTER(H3_EV_H3S_END, qcs->qcc->conn, qcs); |
| |
| pool_free(pool_head_h3s, h3s); |
| qcs->ctx = NULL; |
| |
| TRACE_LEAVE(H3_EV_H3S_END, qcs->qcc->conn, qcs); |
| } |
| |
| static int h3_finalize(void *ctx) |
| { |
| struct h3c *h3c = ctx; |
| struct qcs *qcs; |
| |
| qcs = qcc_init_stream_local(h3c->qcc, 0); |
| if (!qcs) |
| return 0; |
| |
| h3_control_send(qcs, h3c); |
| h3c->ctrl_strm = qcs; |
| |
| return 1; |
| } |
| |
| /* Generate a GOAWAY frame for <h3c> connection on the control stream. |
| * |
| * Returns 0 on success else non-zero. |
| */ |
| static int h3_send_goaway(struct h3c *h3c) |
| { |
| struct qcs *qcs = h3c->ctrl_strm; |
| struct buffer pos, *res; |
| unsigned char data[3 * QUIC_VARINT_MAX_SIZE]; |
| size_t frm_len = quic_int_getsize(h3c->id_goaway); |
| |
| if (!qcs) |
| return 1; |
| |
| pos = b_make((char *)data, sizeof(data), 0, 0); |
| |
| b_quic_enc_int(&pos, H3_FT_GOAWAY); |
| b_quic_enc_int(&pos, frm_len); |
| b_quic_enc_int(&pos, h3c->id_goaway); |
| |
| res = mux_get_buf(qcs); |
| if (!res || b_room(res) < b_data(&pos)) { |
| /* Do not try forcefully to emit GOAWAY if no space left. */ |
| return 1; |
| } |
| |
| b_force_xfer(res, &pos, b_data(&pos)); |
| |
| return 0; |
| } |
| |
| /* Initialize the HTTP/3 context for <qcc> mux. |
| * Return 1 if succeeded, 0 if not. |
| */ |
| static int h3_init(struct qcc *qcc) |
| { |
| struct h3c *h3c; |
| struct quic_conn *qc = qcc->conn->handle.qc; |
| |
| h3c = pool_alloc(pool_head_h3c); |
| if (!h3c) |
| goto fail_no_h3; |
| |
| h3c->qcc = qcc; |
| h3c->ctrl_strm = NULL; |
| h3c->err = H3_NO_ERROR; |
| h3c->flags = 0; |
| h3c->id_goaway = 0; |
| |
| qcc->ctx = h3c; |
| h3c->prx_counters = |
| EXTRA_COUNTERS_GET(qc->li->bind_conf->frontend->extra_counters_fe, |
| &h3_stats_module); |
| LIST_INIT(&h3c->buf_wait.list); |
| |
| return 1; |
| |
| fail_no_h3: |
| return 0; |
| } |
| |
| static void h3_release(void *ctx) |
| { |
| struct h3c *h3c = ctx; |
| |
| /* RFC 9114 5.2. Connection Shutdown |
| * |
| * Even when a connection is not idle, either endpoint can decide to |
| * stop using the connection and initiate a graceful connection close. |
| * Endpoints initiate the graceful shutdown of an HTTP/3 connection by |
| * sending a GOAWAY frame. |
| */ |
| h3_send_goaway(h3c); |
| |
| /* RFC 9114 5.2. Connection Shutdown |
| * |
| * An endpoint that completes a |
| * graceful shutdown SHOULD use the H3_NO_ERROR error code when closing |
| * the connection. |
| */ |
| qcc_emit_cc_app(h3c->qcc, H3_NO_ERROR, 0); |
| |
| pool_free(pool_head_h3c, h3c); |
| } |
| |
| /* Increment the h3 error code counters for <error_code> value */ |
| static void h3_stats_inc_err_cnt(void *ctx, int err_code) |
| { |
| struct h3c *h3c = ctx; |
| |
| h3_inc_err_cnt(h3c->prx_counters, err_code); |
| } |
| |
| /* h3 trace handler */ |
| static void h3_trace(enum trace_level level, uint64_t mask, |
| const struct trace_source *src, |
| const struct ist where, const struct ist func, |
| const void *a1, const void *a2, const void *a3, const void *a4) |
| { |
| const struct connection *conn = a1; |
| const struct qcc *qcc = conn ? conn->ctx : NULL; |
| const struct qcs *qcs = a2; |
| |
| if (src->verbosity > H3_VERB_CLEAN) { |
| chunk_appendf(&trace_buf, " : qcc=%p(F)", qcc); |
| |
| if (qcs) |
| chunk_appendf(&trace_buf, " qcs=%p(%llu)", qcs, (ull)qcs->id); |
| } |
| } |
| |
| /* HTTP/3 application layer operations */ |
| const struct qcc_app_ops h3_ops = { |
| .init = h3_init, |
| .attach = h3_attach, |
| .decode_qcs = h3_decode_qcs, |
| .snd_buf = h3_snd_buf, |
| .detach = h3_detach, |
| .finalize = h3_finalize, |
| .release = h3_release, |
| .inc_err_cnt = h3_stats_inc_err_cnt, |
| }; |