| /* |
| * HTTP/2 mux-demux for connections |
| * |
| * Copyright 2017 Willy Tarreau <w@1wt.eu> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| |
| #include <common/cfgparse.h> |
| #include <common/config.h> |
| #include <common/h2.h> |
| #include <common/hpack-tbl.h> |
| #include <common/net_helper.h> |
| #include <proto/applet.h> |
| #include <proto/connection.h> |
| #include <proto/h1.h> |
| #include <proto/stream.h> |
| #include <eb32tree.h> |
| |
| |
| /* dummy streams returned for idle and closed states */ |
| static const struct h2s *h2_closed_stream; |
| static const struct h2s *h2_idle_stream; |
| |
| /* the h2c connection pool */ |
| static struct pool_head *pool2_h2c; |
| /* the h2s stream pool */ |
| static struct pool_head *pool2_h2s; |
| |
| /* Connection flags (32 bit), in h2c->flags */ |
| #define H2_CF_NONE 0x00000000 |
| |
| /* Flags indicating why writing to the mux is blocked. */ |
| #define H2_CF_MUX_MALLOC 0x00000001 // mux blocked on lack of connection's mux buffer |
| #define H2_CF_MUX_MFULL 0x00000002 // mux blocked on connection's mux buffer full |
| #define H2_CF_MUX_BLOCK_ANY 0x00000003 // aggregate of the mux flags above |
| |
| /* Flags indicating why writing to the demux is blocked. */ |
| #define H2_CF_DEM_DALLOC 0x00000004 // demux blocked on lack of connection's demux buffer |
| #define H2_CF_DEM_DFULL 0x00000008 // demux blocked on connection's demux buffer full |
| #define H2_CF_DEM_MBUSY 0x00000010 // demux blocked on connection's mux side busy |
| #define H2_CF_DEM_MROOM 0x00000020 // demux blocked on lack of room in mux buffer |
| #define H2_CF_DEM_SALLOC 0x00000040 // demux blocked on lack of stream's request buffer |
| #define H2_CF_DEM_SFULL 0x00000080 // demux blocked on stream request buffer full |
| #define H2_CF_DEM_BLOCK_ANY 0x000000FC // aggregate of the demux flags above |
| |
| /* other flags */ |
| #define H2_CF_GOAWAY_SENT 0x00000100 // a GOAWAY frame was successfully sent |
| #define H2_CF_GOAWAY_FAILED 0x00000200 // a GOAWAY frame failed to be sent |
| |
| |
| /* H2 connection state, in h2c->st0 */ |
| enum h2_cs { |
| H2_CS_PREFACE, // init done, waiting for connection preface |
| H2_CS_SETTINGS1, // preface OK, waiting for first settings frame |
| H2_CS_FRAME_H, // first settings frame ok, waiting for frame header |
| H2_CS_FRAME_P, // frame header OK, waiting for frame payload |
| H2_CS_FRAME_A, // frame payload OK, trying to send ACK/RST frame |
| H2_CS_ERROR, // send GOAWAY(errcode) and close the connection ASAP |
| H2_CS_ERROR2, // GOAWAY(errcode) sent, close the connection ASAP |
| H2_CS_ENTRIES // must be last |
| } __attribute__((packed)); |
| |
| /* H2 connection descriptor */ |
| struct h2c { |
| struct connection *conn; |
| |
| enum h2_cs st0; /* mux state */ |
| enum h2_err errcode; /* H2 err code (H2_ERR_*) */ |
| |
| /* 16 bit hole here */ |
| uint32_t flags; /* connection flags: H2_CF_* */ |
| int32_t max_id; /* highest ID known on this connection, <0 before preface */ |
| uint32_t rcvd_c; /* newly received data to ACK for the connection */ |
| uint32_t rcvd_s; /* newly received data to ACK for the current stream (dsi) */ |
| |
| /* states for the demux direction */ |
| struct hpack_dht *ddht; /* demux dynamic header table */ |
| struct buffer *dbuf; /* demux buffer */ |
| |
| int32_t dsi; /* demux stream ID (<0 = idle) */ |
| int32_t dfl; /* demux frame length (if dsi >= 0) */ |
| int8_t dft; /* demux frame type (if dsi >= 0) */ |
| int8_t dff; /* demux frame flags (if dsi >= 0) */ |
| /* 16 bit hole here */ |
| int32_t last_sid; /* last processed stream ID for GOAWAY, <0 before preface */ |
| |
| /* states for the mux direction */ |
| struct buffer *mbuf; /* mux buffer */ |
| int32_t msi; /* mux stream ID (<0 = idle) */ |
| int32_t mfl; /* mux frame length (if dsi >= 0) */ |
| int8_t mft; /* mux frame type (if dsi >= 0) */ |
| int8_t mff; /* mux frame flags (if dsi >= 0) */ |
| /* 16 bit hole here */ |
| int32_t miw; /* mux initial window size for all new streams */ |
| int32_t mws; /* mux window size. Can be negative. */ |
| int32_t mfs; /* mux's max frame size */ |
| |
| struct eb_root streams_by_id; /* all active streams by their ID */ |
| struct list send_list; /* list of blocked streams requesting to send */ |
| struct list fctl_list; /* list of streams blocked by connection's fctl */ |
| struct buffer_wait dbuf_wait; /* wait list for demux buffer allocation */ |
| struct buffer_wait mbuf_wait; /* wait list for mux buffer allocation */ |
| }; |
| |
| /* H2 stream state, in h2s->st */ |
| enum h2_ss { |
| H2_SS_IDLE = 0, // idle |
| H2_SS_RLOC, // reserved(local) |
| H2_SS_RREM, // reserved(remote) |
| H2_SS_OPEN, // open |
| H2_SS_HREM, // half-closed(remote) |
| H2_SS_HLOC, // half-closed(local) |
| H2_SS_ERROR, // an error needs to be sent using RST_STREAM |
| H2_SS_RESET, // closed after sending RST_STREAM |
| H2_SS_CLOSED, // closed |
| H2_SS_ENTRIES // must be last |
| } __attribute__((packed)); |
| |
| /* HTTP/2 stream flags (32 bit), in h2s->flags */ |
| #define H2_SF_NONE 0x00000000 |
| #define H2_SF_ES_RCVD 0x00000001 |
| #define H2_SF_ES_SENT 0x00000002 |
| |
| #define H2_SF_RST_RCVD 0x00000004 // received RST_STREAM |
| #define H2_SF_RST_SENT 0x00000008 // sent RST_STREAM |
| |
| /* stream flags indicating the reason the stream is blocked */ |
| #define H2_SF_BLK_MBUSY 0x00000010 // blocked waiting for mux access (transient) |
| #define H2_SF_BLK_MROOM 0x00000020 // blocked waiting for room in the mux |
| #define H2_SF_BLK_MFCTL 0x00000040 // blocked due to mux fctl |
| #define H2_SF_BLK_SFCTL 0x00000080 // blocked due to stream fctl |
| #define H2_SF_BLK_ANY 0x000000F0 // any of the reasons above |
| |
| /* H2 stream descriptor, describing the stream as it appears in the H2C, and as |
| * it is being processed in the internal HTTP representation (H1 for now). |
| */ |
| struct h2s { |
| struct conn_stream *cs; |
| struct h2c *h2c; |
| struct h1m req, res; /* request and response parser state for H1 */ |
| struct eb32_node by_id; /* place in h2c's streams_by_id */ |
| struct list list; /* position in active/blocked lists if blocked>0 */ |
| int32_t id; /* stream ID */ |
| uint32_t flags; /* H2_SF_* */ |
| int mws; /* mux window size for this stream */ |
| enum h2_err errcode; /* H2 err code (H2_ERR_*) */ |
| enum h2_ss st; |
| }; |
| |
| /* descriptor for an h2 frame header */ |
| struct h2_fh { |
| uint32_t len; /* length, host order, 24 bits */ |
| uint32_t sid; /* stream id, host order, 31 bits */ |
| uint8_t ft; /* frame type */ |
| uint8_t ff; /* frame flags */ |
| }; |
| |
| /* a few settings from the global section */ |
| static int h2_settings_header_table_size = 4096; /* initial value */ |
| static int h2_settings_initial_window_size = 65535; /* initial value */ |
| static int h2_settings_max_concurrent_streams = 100; |
| |
| /* a dmumy closed stream */ |
| static const struct h2s *h2_closed_stream = &(const struct h2s){ |
| .cs = NULL, |
| .h2c = NULL, |
| .st = H2_SS_CLOSED, |
| .id = 0, |
| }; |
| |
| /* and a dummy idle stream for use with any unannounced stream */ |
| static const struct h2s *h2_idle_stream = &(const struct h2s){ |
| .cs = NULL, |
| .h2c = NULL, |
| .st = H2_SS_IDLE, |
| .id = 0, |
| }; |
| |
| |
| /*****************************************************/ |
| /* functions below are for dynamic buffer management */ |
| /*****************************************************/ |
| |
| /* re-enables receiving on mux <target> after a buffer was allocated. It returns |
| * 1 if the allocation succeeds, in which case the connection is woken up, or 0 |
| * if it's impossible to wake up and we prefer to be woken up later. |
| */ |
| static int h2_dbuf_available(void *target) |
| { |
| struct h2c *h2c = target; |
| |
| /* take the buffer now as we'll get scheduled waiting for ->wake() */ |
| if (b_alloc_margin(&h2c->dbuf, 0)) { |
| h2c->flags &= ~H2_CF_DEM_DALLOC; |
| if (!(h2c->flags & H2_CF_DEM_BLOCK_ANY)) |
| conn_xprt_want_recv(h2c->conn); |
| return 1; |
| } |
| return 0; |
| } |
| |
| static inline struct buffer *h2_get_dbuf(struct h2c *h2c) |
| { |
| struct buffer *buf = NULL; |
| |
| if (likely(LIST_ISEMPTY(&h2c->dbuf_wait.list)) && |
| unlikely((buf = b_alloc_margin(&h2c->dbuf, 0)) == NULL)) { |
| h2c->dbuf_wait.target = h2c->conn; |
| h2c->dbuf_wait.wakeup_cb = h2_dbuf_available; |
| SPIN_LOCK(BUF_WQ_LOCK, &buffer_wq_lock); |
| LIST_ADDQ(&buffer_wq, &h2c->dbuf_wait.list); |
| SPIN_UNLOCK(BUF_WQ_LOCK, &buffer_wq_lock); |
| __conn_xprt_stop_recv(h2c->conn); |
| } |
| return buf; |
| } |
| |
| static inline void h2_release_dbuf(struct h2c *h2c) |
| { |
| if (h2c->dbuf->size) { |
| b_free(&h2c->dbuf); |
| offer_buffers(h2c->dbuf_wait.target, |
| tasks_run_queue + applets_active_queue); |
| } |
| } |
| |
| /* re-enables sending on mux <target> after a buffer was allocated. It returns |
| * 1 if the allocation succeeds, in which case the connection is woken up, or 0 |
| * if it's impossible to wake up and we prefer to be woken up later. |
| */ |
| static int h2_mbuf_available(void *target) |
| { |
| struct h2c *h2c = target; |
| |
| /* take the buffer now as we'll get scheduled waiting for ->wake(). */ |
| if (b_alloc_margin(&h2c->mbuf, 0)) { |
| if (h2c->flags & H2_CF_MUX_MALLOC) { |
| h2c->flags &= ~H2_CF_MUX_MALLOC; |
| if (!(h2c->flags & H2_CF_MUX_BLOCK_ANY)) |
| conn_xprt_want_send(h2c->conn); |
| } |
| |
| if (h2c->flags & H2_CF_DEM_MROOM) { |
| h2c->flags &= ~H2_CF_DEM_MROOM; |
| if (!(h2c->flags & H2_CF_DEM_BLOCK_ANY)) |
| conn_xprt_want_recv(h2c->conn); |
| } |
| |
| /* FIXME: we should in fact call something like h2_update_poll() |
| * now to recompte the polling. For now it will be enough like |
| * this. |
| */ |
| return 1; |
| } |
| return 0; |
| } |
| |
| static inline struct buffer *h2_get_mbuf(struct h2c *h2c) |
| { |
| struct buffer *buf = NULL; |
| |
| if (likely(LIST_ISEMPTY(&h2c->mbuf_wait.list)) && |
| unlikely((buf = b_alloc_margin(&h2c->mbuf, 0)) == NULL)) { |
| h2c->mbuf_wait.target = h2c; |
| h2c->mbuf_wait.wakeup_cb = h2_mbuf_available; |
| SPIN_LOCK(BUF_WQ_LOCK, &buffer_wq_lock); |
| LIST_ADDQ(&buffer_wq, &h2c->mbuf_wait.list); |
| SPIN_UNLOCK(BUF_WQ_LOCK, &buffer_wq_lock); |
| |
| /* FIXME: we should in fact only block the direction being |
| * currently used. For now it will be enough like this. |
| */ |
| __conn_xprt_stop_send(h2c->conn); |
| __conn_xprt_stop_recv(h2c->conn); |
| } |
| return buf; |
| } |
| |
| static inline void h2_release_mbuf(struct h2c *h2c) |
| { |
| if (h2c->mbuf->size) { |
| b_free(&h2c->mbuf); |
| offer_buffers(h2c->mbuf_wait.target, |
| tasks_run_queue + applets_active_queue); |
| } |
| } |
| |
| |
| /*****************************************************************/ |
| /* functions below are dedicated to the mux setup and management */ |
| /*****************************************************************/ |
| |
| /* tries to initialize the inbound h2c mux. Returns < 0 in case of failure. */ |
| static int h2c_frt_init(struct connection *conn) |
| { |
| struct h2c *h2c; |
| |
| h2c = pool_alloc2(pool2_h2c); |
| if (!h2c) |
| goto fail; |
| |
| h2c->ddht = hpack_dht_alloc(h2_settings_header_table_size); |
| if (!h2c->ddht) |
| goto fail; |
| |
| /* Initialise the context. */ |
| h2c->st0 = H2_CS_PREFACE; |
| h2c->conn = conn; |
| h2c->max_id = -1; |
| h2c->errcode = H2_ERR_NO_ERROR; |
| h2c->flags = H2_CF_NONE; |
| h2c->rcvd_c = 0; |
| h2c->rcvd_s = 0; |
| |
| h2c->dbuf = &buf_empty; |
| h2c->dsi = -1; |
| h2c->msi = -1; |
| h2c->last_sid = -1; |
| |
| h2c->mbuf = &buf_empty; |
| h2c->miw = 65535; /* mux initial window size */ |
| h2c->mws = 65535; /* mux window size */ |
| h2c->mfs = 16384; /* initial max frame size */ |
| h2c->streams_by_id = EB_ROOT_UNIQUE; |
| LIST_INIT(&h2c->send_list); |
| LIST_INIT(&h2c->fctl_list); |
| LIST_INIT(&h2c->dbuf_wait.list); |
| LIST_INIT(&h2c->mbuf_wait.list); |
| conn->mux_ctx = h2c; |
| |
| conn_xprt_want_recv(conn); |
| /* mux->wake will be called soon to complete the operation */ |
| return 0; |
| fail: |
| pool_free2(pool2_h2c, h2c); |
| return -1; |
| } |
| |
| /* Initialize the mux once it's attached. For outgoing connections, the context |
| * is already initialized before installing the mux, so we detect incoming |
| * connections from the fact that the context is still NULL. Returns < 0 on |
| * error. |
| */ |
| static int h2_init(struct connection *conn) |
| { |
| if (conn->mux_ctx) { |
| /* we don't support outgoing connections for now */ |
| return -1; |
| } |
| |
| return h2c_frt_init(conn); |
| } |
| |
| /* returns the stream associated with id <id> or NULL if not found */ |
| static inline struct h2s *h2c_st_by_id(struct h2c *h2c, int id) |
| { |
| struct eb32_node *node; |
| |
| if (id > h2c->max_id) |
| return (struct h2s *)h2_idle_stream; |
| |
| node = eb32_lookup(&h2c->streams_by_id, id); |
| if (!node) |
| return (struct h2s *)h2_closed_stream; |
| |
| return container_of(node, struct h2s, by_id); |
| } |
| |
| /* release function for a connection. This one should be called to free all |
| * resources allocated to the mux. |
| */ |
| static void h2_release(struct connection *conn) |
| { |
| struct h2c *h2c = conn->mux_ctx; |
| |
| LIST_DEL(&conn->list); |
| |
| if (h2c) { |
| hpack_dht_free(h2c->ddht); |
| h2_release_dbuf(h2c); |
| SPIN_LOCK(BUF_WQ_LOCK, &buffer_wq_lock); |
| LIST_DEL(&h2c->dbuf_wait.list); |
| SPIN_UNLOCK(BUF_WQ_LOCK, &buffer_wq_lock); |
| |
| h2_release_mbuf(h2c); |
| SPIN_LOCK(BUF_WQ_LOCK, &buffer_wq_lock); |
| LIST_DEL(&h2c->mbuf_wait.list); |
| SPIN_UNLOCK(BUF_WQ_LOCK, &buffer_wq_lock); |
| |
| pool_free2(pool2_h2c, h2c); |
| } |
| |
| conn->mux = NULL; |
| conn->mux_ctx = NULL; |
| |
| conn_stop_tracking(conn); |
| conn_full_close(conn); |
| if (conn->destroy_cb) |
| conn->destroy_cb(conn); |
| conn_free(conn); |
| } |
| |
| |
| /******************************************************/ |
| /* functions below are for the H2 protocol processing */ |
| /******************************************************/ |
| |
| /* returns the stream if of stream <h2s> or 0 if <h2s> is NULL */ |
| static inline int h2s_id(const struct h2s *h2s) |
| { |
| return h2s ? h2s->id : 0; |
| } |
| |
| /* returns true of the mux is currently busy as seen from stream <h2s> */ |
| static inline int h2c_mux_busy(const struct h2c *h2c, const struct h2s *h2s) |
| { |
| if (h2c->msi < 0) |
| return 0; |
| |
| if (h2c->msi == h2s_id(h2s)) |
| return 0; |
| |
| return 1; |
| } |
| |
| /* marks an error on the connection */ |
| static inline void h2c_error(struct h2c *h2c, enum h2_err err) |
| { |
| h2c->errcode = err; |
| h2c->st0 = H2_CS_ERROR; |
| } |
| |
| /* marks an error on the stream */ |
| static inline void h2s_error(struct h2s *h2s, enum h2_err err) |
| { |
| if (h2s->st > H2_SS_IDLE && h2s->st < H2_SS_ERROR) { |
| h2s->errcode = err; |
| h2s->st = H2_SS_ERROR; |
| if (h2s->cs) |
| h2s->cs->flags |= CS_FL_ERROR; |
| } |
| } |
| |
| /* writes the 24-bit frame size <len> at address <frame> */ |
| static inline void h2_set_frame_size(void *frame, uint32_t len) |
| { |
| uint8_t *out = frame; |
| |
| *out = len >> 16; |
| write_n16(out + 1, len); |
| } |
| |
| /* reads <bytes> bytes from buffer <b> starting at relative offset <o> from the |
| * current pointer, dealing with wrapping, and stores the result in <dst>. It's |
| * the caller's responsibility to verify that there are at least <bytes> bytes |
| * available in the buffer's input prior to calling this function. |
| */ |
| static inline void h2_get_buf_bytes(void *dst, size_t bytes, |
| const struct buffer *b, int o) |
| { |
| readv_bytes(dst, bytes, b_ptr(b, o), b_end(b) - b_ptr(b, o), b->data); |
| } |
| |
| static inline uint16_t h2_get_n16(const struct buffer *b, int o) |
| { |
| return readv_n16(b_ptr(b, o), b_end(b) - b_ptr(b, o), b->data); |
| } |
| |
| static inline uint32_t h2_get_n32(const struct buffer *b, int o) |
| { |
| return readv_n32(b_ptr(b, o), b_end(b) - b_ptr(b, o), b->data); |
| } |
| |
| static inline uint64_t h2_get_n64(const struct buffer *b, int o) |
| { |
| return readv_n64(b_ptr(b, o), b_end(b) - b_ptr(b, o), b->data); |
| } |
| |
| |
| /* Peeks an H2 frame header from buffer <b> into descriptor <h>. The algorithm |
| * is not obvious. It turns out that H2 headers are neither aligned nor do they |
| * use regular sizes. And to add to the trouble, the buffer may wrap so each |
| * byte read must be checked. The header is formed like this : |
| * |
| * b0 b1 b2 b3 b4 b5..b8 |
| * +----------+---------+--------+----+----+----------------------+ |
| * |len[23:16]|len[15:8]|len[7:0]|type|flag|sid[31:0] (big endian)| |
| * +----------+---------+--------+----+----+----------------------+ |
| * |
| * Here we read a big-endian 64 bit word from h[1]. This way in a single read |
| * we get the sid properly aligned and ordered, and 16 bits of len properly |
| * ordered as well. The type and flags can be extracted using bit shifts from |
| * the word, and only one extra read is needed to fetch len[16:23]. |
| * Returns zero if some bytes are missing, otherwise non-zero on success. |
| */ |
| static int h2_peek_frame_hdr(const struct buffer *b, struct h2_fh *h) |
| { |
| uint64_t w; |
| |
| if (b->i < 9) |
| return 0; |
| |
| w = readv_n64(b_ptr(b,1), b_end(b) - b_ptr(b,1), b->data); |
| h->len = *b->p << 16; |
| h->sid = w & 0x7FFFFFFF; /* RFC7540#4.1: R bit must be ignored */ |
| h->ff = w >> 32; |
| h->ft = w >> 40; |
| h->len += w >> 48; |
| return 1; |
| } |
| |
| /* skip the next 9 bytes corresponding to the frame header possibly parsed by |
| * h2_peek_frame_hdr() above. |
| */ |
| static inline void h2_skip_frame_hdr(struct buffer *b) |
| { |
| bi_del(b, 9); |
| } |
| |
| /* same as above, automatically advances the buffer on success */ |
| static inline int h2_get_frame_hdr(struct buffer *b, struct h2_fh *h) |
| { |
| int ret; |
| |
| ret = h2_peek_frame_hdr(b, h); |
| if (ret > 0) |
| h2_skip_frame_hdr(b); |
| return ret; |
| } |
| |
| /* creates a new stream <id> on the h2c connection and returns it, or NULL in |
| * case of memory allocation error. |
| */ |
| static struct h2s *h2c_stream_new(struct h2c *h2c, int id) |
| { |
| struct conn_stream *cs; |
| struct h2s *h2s; |
| |
| h2s = pool_alloc2(pool2_h2s); |
| if (!h2s) |
| goto out; |
| |
| h2s->h2c = h2c; |
| h2s->mws = h2c->miw; |
| h2s->flags = H2_SF_NONE; |
| h2s->errcode = H2_ERR_NO_ERROR; |
| h2s->st = H2_SS_IDLE; |
| h1m_init(&h2s->req); |
| h1m_init(&h2s->res); |
| h2s->by_id.key = h2s->id = id; |
| h2c->max_id = id; |
| LIST_INIT(&h2s->list); |
| |
| eb32_insert(&h2c->streams_by_id, &h2s->by_id); |
| |
| cs = cs_new(h2c->conn); |
| if (!cs) |
| goto out_close; |
| |
| h2s->cs = cs; |
| cs->ctx = h2s; |
| |
| if (stream_create_from_cs(cs) < 0) |
| goto out_free_cs; |
| |
| /* OK done, the stream lives its own life now */ |
| return h2s; |
| |
| out_free_cs: |
| cs_free(cs); |
| out_close: |
| eb32_delete(&h2s->by_id); |
| pool_free2(pool2_h2s, h2s); |
| h2s = NULL; |
| out: |
| return h2s; |
| } |
| |
| /* try to send a settings frame on the connection. Returns > 0 on success, 0 if |
| * it couldn't do anything. It may return an error in h2c. See RFC7540#11.3 for |
| * the various settings codes. |
| */ |
| static int h2c_snd_settings(struct h2c *h2c) |
| { |
| struct buffer *res; |
| char buf_data[100]; // enough for 15 settings |
| struct chunk buf; |
| int ret; |
| |
| if (h2c_mux_busy(h2c, NULL)) { |
| h2c->flags |= H2_CF_DEM_MBUSY; |
| return 0; |
| } |
| |
| res = h2_get_mbuf(h2c); |
| if (!res) { |
| h2c->flags |= H2_CF_MUX_MALLOC; |
| h2c->flags |= H2_CF_DEM_MROOM; |
| return 0; |
| } |
| |
| chunk_init(&buf, buf_data, sizeof(buf_data)); |
| chunk_memcpy(&buf, |
| "\x00\x00\x00" /* length : 0 for now */ |
| "\x04\x00" /* type : 4 (settings), flags : 0 */ |
| "\x00\x00\x00\x00", /* stream ID : 0 */ |
| 9); |
| |
| if (h2_settings_header_table_size != 4096) { |
| char str[6] = "\x00\x01"; /* header_table_size */ |
| |
| write_n32(str + 2, h2_settings_header_table_size); |
| chunk_memcat(&buf, str, 6); |
| } |
| |
| if (h2_settings_initial_window_size != 65535) { |
| char str[6] = "\x00\x04"; /* initial_window_size */ |
| |
| write_n32(str + 2, h2_settings_initial_window_size); |
| chunk_memcat(&buf, str, 6); |
| } |
| |
| if (h2_settings_max_concurrent_streams != 0) { |
| char str[6] = "\x00\x03"; /* max_concurrent_streams */ |
| |
| /* Note: 0 means "unlimited" for haproxy's config but not for |
| * the protocol, so never send this value! |
| */ |
| write_n32(str + 2, h2_settings_max_concurrent_streams); |
| chunk_memcat(&buf, str, 6); |
| } |
| |
| if (global.tune.bufsize != 16384) { |
| char str[6] = "\x00\x05"; /* max_frame_size */ |
| |
| /* note: similarly we could also emit MAX_HEADER_LIST_SIZE to |
| * match bufsize - rewrite size, but at the moment it seems |
| * that clients don't take care of it. |
| */ |
| write_n32(str + 2, global.tune.bufsize); |
| chunk_memcat(&buf, str, 6); |
| } |
| |
| h2_set_frame_size(buf.str, buf.len - 9); |
| ret = bo_istput(res, ist2(buf.str, buf.len)); |
| if (unlikely(ret <= 0)) { |
| if (!ret) { |
| h2c->flags |= H2_CF_MUX_MFULL; |
| h2c->flags |= H2_CF_DEM_MROOM; |
| return 0; |
| } |
| else { |
| h2c_error(h2c, H2_ERR_INTERNAL_ERROR); |
| return 0; |
| } |
| } |
| return ret; |
| } |
| |
| /* Try to receive a connection preface, then upon success try to send our |
| * preface which is a SETTINGS frame. Returns > 0 on success or zero on |
| * missing data. It may return an error in h2c. |
| */ |
| static int h2c_frt_recv_preface(struct h2c *h2c) |
| { |
| int ret1; |
| int ret2; |
| |
| ret1 = b_isteq(h2c->dbuf, 0, h2c->dbuf->i, ist(H2_CONN_PREFACE)); |
| |
| if (unlikely(ret1 <= 0)) { |
| if (ret1 < 0 || conn_xprt_read0_pending(h2c->conn)) |
| h2c_error(h2c, H2_ERR_PROTOCOL_ERROR); |
| return 0; |
| } |
| |
| ret2 = h2c_snd_settings(h2c); |
| if (ret2 > 0) |
| bi_del(h2c->dbuf, ret1); |
| |
| return ret2; |
| } |
| |
| /* try to send a GOAWAY frame on the connection to report an error or a graceful |
| * shutdown, with h2c->errcode as the error code. Returns > 0 on success or zero |
| * if nothing was done. It uses h2c->last_sid as the advertised ID, or copies it |
| * from h2c->max_id if it's not set yet (<0). In case of lack of room to write |
| * the message, it subscribes the requester (either <h2s> or <h2c>) to future |
| * notifications. It sets H2_CF_GOAWAY_SENT on success, and H2_CF_GOAWAY_FAILED |
| * on unrecoverable failure. It will not attempt to send one again in this last |
| * case so that it is safe to use h2c_error() to report such errors. |
| */ |
| static int h2c_send_goaway_error(struct h2c *h2c, struct h2s *h2s) |
| { |
| struct buffer *res; |
| char str[17]; |
| int ret; |
| |
| if (h2c->flags & H2_CF_GOAWAY_FAILED) |
| return 1; // claim that it worked |
| |
| if (h2c_mux_busy(h2c, h2s)) { |
| if (h2s) |
| h2s->flags |= H2_SF_BLK_MBUSY; |
| else |
| h2c->flags |= H2_CF_DEM_MBUSY; |
| return 0; |
| } |
| |
| res = h2_get_mbuf(h2c); |
| if (!res) { |
| h2c->flags |= H2_CF_MUX_MALLOC; |
| if (h2s) |
| h2s->flags |= H2_SF_BLK_MROOM; |
| else |
| h2c->flags |= H2_CF_DEM_MROOM; |
| return 0; |
| } |
| |
| /* len: 8, type: 7, flags: none, sid: 0 */ |
| memcpy(str, "\x00\x00\x08\x07\x00\x00\x00\x00\x00", 9); |
| |
| if (h2c->last_sid < 0) |
| h2c->last_sid = h2c->max_id; |
| |
| write_n32(str + 9, h2c->last_sid); |
| write_n32(str + 13, h2c->errcode); |
| ret = bo_istput(res, ist2(str, 17)); |
| if (unlikely(ret <= 0)) { |
| if (!ret) { |
| h2c->flags |= H2_CF_MUX_MFULL; |
| if (h2s) |
| h2s->flags |= H2_SF_BLK_MROOM; |
| else |
| h2c->flags |= H2_CF_DEM_MROOM; |
| return 0; |
| } |
| else { |
| /* we cannot report this error using GOAWAY, so we mark |
| * it and claim a success. |
| */ |
| h2c_error(h2c, H2_ERR_INTERNAL_ERROR); |
| h2c->flags |= H2_CF_GOAWAY_FAILED; |
| return 1; |
| } |
| } |
| h2c->flags |= H2_CF_GOAWAY_SENT; |
| return ret; |
| } |
| |
| /* processes a PING frame and schedules an ACK if needed. The caller must pass |
| * the pointer to the payload in <payload>. Returns > 0 on success or zero on |
| * missing data. It may return an error in h2c. |
| */ |
| static int h2c_handle_ping(struct h2c *h2c) |
| { |
| /* frame length must be exactly 8 */ |
| if (h2c->dfl != 8) { |
| h2c_error(h2c, H2_ERR_FRAME_SIZE_ERROR); |
| return 0; |
| } |
| |
| /* schedule a response */ |
| if (!(h2c->dft & H2_F_PING_ACK)) |
| h2c->st0 = H2_CS_FRAME_A; |
| return 1; |
| } |
| |
| /* try to send an ACK for a ping frame on the connection. Returns > 0 on |
| * success, 0 on missing data or one of the h2_status values. |
| */ |
| static int h2c_ack_ping(struct h2c *h2c) |
| { |
| struct buffer *res; |
| char str[17]; |
| int ret = -1; |
| |
| if (h2c->dbuf->i < 8) |
| return 0; |
| |
| if (h2c_mux_busy(h2c, NULL)) { |
| h2c->flags |= H2_CF_DEM_MBUSY; |
| return 0; |
| } |
| |
| res = h2_get_mbuf(h2c); |
| if (!res) { |
| h2c->flags |= H2_CF_MUX_MALLOC; |
| h2c->flags |= H2_CF_DEM_MROOM; |
| return 0; |
| } |
| |
| memcpy(str, |
| "\x00\x00\x08" /* length : 8 (same payload) */ |
| "\x06" "\x01" /* type : 6, flags : ACK */ |
| "\x00\x00\x00\x00" /* stream ID */, 9); |
| |
| /* copy the original payload */ |
| h2_get_buf_bytes(str + 9, 8, h2c->dbuf, 0); |
| |
| ret = bo_istput(res, ist2(str, 17)); |
| if (unlikely(ret <= 0)) { |
| if (!ret) { |
| h2c->flags |= H2_CF_MUX_MFULL; |
| h2c->flags |= H2_CF_DEM_MROOM; |
| return 0; |
| } |
| else { |
| h2c_error(h2c, H2_ERR_INTERNAL_ERROR); |
| return 0; |
| } |
| } |
| return ret; |
| } |
| |
| /* process Rx frames to be demultiplexed */ |
| static void h2_process_demux(struct h2c *h2c) |
| { |
| if (h2c->st0 >= H2_CS_ERROR) |
| return; |
| |
| if (unlikely(h2c->st0 < H2_CS_FRAME_H)) { |
| if (h2c->st0 == H2_CS_PREFACE) { |
| if (unlikely(h2c_frt_recv_preface(h2c) <= 0)) { |
| /* RFC7540#3.5: a GOAWAY frame MAY be omitted */ |
| if (h2c->st0 == H2_CS_ERROR) |
| h2c->st0 = H2_CS_ERROR2; |
| goto fail; |
| } |
| |
| h2c->max_id = 0; |
| h2c->st0 = H2_CS_SETTINGS1; |
| } |
| |
| if (h2c->st0 == H2_CS_SETTINGS1) { |
| struct h2_fh hdr; |
| |
| /* ensure that what is pending is a valid SETTINGS frame |
| * without an ACK. |
| */ |
| if (!h2_get_frame_hdr(h2c->dbuf, &hdr)) { |
| /* RFC7540#3.5: a GOAWAY frame MAY be omitted */ |
| if (h2c->st0 == H2_CS_ERROR) |
| h2c->st0 = H2_CS_ERROR2; |
| goto fail; |
| } |
| |
| if (hdr.sid || hdr.ft != H2_FT_SETTINGS || hdr.ff & H2_F_SETTINGS_ACK) { |
| /* RFC7540#3.5: a GOAWAY frame MAY be omitted */ |
| h2c_error(h2c, H2_ERR_PROTOCOL_ERROR); |
| h2c->st0 = H2_CS_ERROR2; |
| goto fail; |
| } |
| |
| if ((int)hdr.len < 0 || (int)hdr.len > h2c->mfs) { |
| /* RFC7540#3.5: a GOAWAY frame MAY be omitted */ |
| h2c_error(h2c, H2_ERR_FRAME_SIZE_ERROR); |
| h2c->st0 = H2_CS_ERROR2; |
| goto fail; |
| } |
| |
| /* that's OK, switch to FRAME_P to process it */ |
| h2c->dfl = hdr.len; |
| h2c->dsi = hdr.sid; |
| h2c->dft = hdr.ft; |
| h2c->dff = hdr.ff; |
| h2c->st0 = H2_CS_FRAME_P; |
| } |
| } |
| |
| /* process as many incoming frames as possible below */ |
| while (h2c->dbuf->i) { |
| int ret = 0; |
| |
| if (h2c->st0 >= H2_CS_ERROR) |
| break; |
| |
| if (h2c->st0 == H2_CS_FRAME_H) { |
| struct h2_fh hdr; |
| |
| if (!h2_peek_frame_hdr(h2c->dbuf, &hdr)) |
| break; |
| |
| if ((int)hdr.len < 0 || (int)hdr.len > h2c->mfs) { |
| h2c_error(h2c, H2_ERR_FRAME_SIZE_ERROR); |
| h2c->st0 = H2_CS_ERROR; |
| break; |
| } |
| |
| h2c->dfl = hdr.len; |
| h2c->dsi = hdr.sid; |
| h2c->dft = hdr.ft; |
| h2c->dff = hdr.ff; |
| h2c->st0 = H2_CS_FRAME_P; |
| h2_skip_frame_hdr(h2c->dbuf); |
| } |
| |
| /* Only H2_CS_FRAME_P and H2_CS_FRAME_A here */ |
| |
| switch (h2c->dft) { |
| case H2_FT_PING: |
| if (h2c->st0 == H2_CS_FRAME_P) |
| ret = h2c_handle_ping(h2c); |
| |
| if (h2c->st0 == H2_CS_FRAME_A) |
| ret = h2c_ack_ping(h2c); |
| break; |
| |
| /* FIXME: implement all supported frame types here */ |
| default: |
| /* drop frames that we ignore. They may be larger than |
| * the buffer so we drain all of their contents until |
| * we reach the end. |
| */ |
| ret = MIN(h2c->dbuf->i, h2c->dfl); |
| bi_del(h2c->dbuf, ret); |
| h2c->dfl -= ret; |
| ret = h2c->dfl == 0; |
| } |
| |
| /* error or missing data condition met above ? */ |
| if (ret <= 0) |
| break; |
| |
| if (h2c->st0 != H2_CS_FRAME_H) { |
| bi_del(h2c->dbuf, h2c->dfl); |
| h2c->st0 = H2_CS_FRAME_H; |
| } |
| } |
| |
| fail: |
| /* we can go here on missing data, blocked response or error */ |
| return; |
| } |
| |
| /* process Tx frames from streams to be multiplexed. Returns > 0 if it reached |
| * the end. |
| */ |
| static int h2_process_mux(struct h2c *h2c) |
| { |
| struct h2s *h2s, *h2s_back; |
| |
| /* First we always process the flow control list because the streams |
| * waiting there were already elected for immediate emission but were |
| * blocked just on this. |
| */ |
| |
| list_for_each_entry_safe(h2s, h2s_back, &h2c->fctl_list, list) { |
| if (h2c->mws <= 0 || h2c->flags & H2_CF_MUX_BLOCK_ANY || |
| h2c->st0 >= H2_CS_ERROR) |
| break; |
| |
| /* In theory it's possible that h2s->cs == NULL here : |
| * - client sends crap that causes a parse error |
| * - RST_STREAM is produced and CS_FL_ERROR at the same time |
| * - RST_STREAM cannot be emitted because mux is busy/full |
| * - stream gets notified, detaches and quits |
| * - mux buffer gets ready and wakes pending streams up |
| * - bam! |
| */ |
| h2s->flags &= ~H2_SF_BLK_ANY; |
| |
| if (h2s->cs) { |
| h2s->cs->data_cb->send(h2s->cs); |
| h2s->cs->data_cb->wake(h2s->cs); |
| } |
| |
| /* depending on callee's blocking reasons, we may queue in send |
| * list or completely dequeue. |
| */ |
| if ((h2s->flags & H2_SF_BLK_MFCTL) == 0) { |
| if (h2s->flags & H2_SF_BLK_ANY) { |
| LIST_DEL(&h2s->list); |
| LIST_ADDQ(&h2c->send_list, &h2s->list); |
| } |
| else { |
| LIST_DEL(&h2s->list); |
| LIST_INIT(&h2s->list); |
| if (h2s->cs) |
| h2s->cs->flags &= ~CS_FL_DATA_WR_ENA; |
| } |
| } |
| } |
| |
| list_for_each_entry_safe(h2s, h2s_back, &h2c->send_list, list) { |
| if (h2c->st0 >= H2_CS_ERROR || h2c->flags & H2_CF_MUX_BLOCK_ANY) |
| break; |
| |
| /* In theory it's possible that h2s->cs == NULL here : |
| * - client sends crap that causes a parse error |
| * - RST_STREAM is produced and CS_FL_ERROR at the same time |
| * - RST_STREAM cannot be emitted because mux is busy/full |
| * - stream gets notified, detaches and quits |
| * - mux buffer gets ready and wakes pending streams up |
| * - bam! |
| */ |
| h2s->flags &= ~H2_SF_BLK_ANY; |
| |
| if (h2s->cs) { |
| h2s->cs->data_cb->send(h2s->cs); |
| h2s->cs->data_cb->wake(h2s->cs); |
| } |
| /* depending on callee's blocking reasons, we may queue in fctl |
| * list or completely dequeue. |
| */ |
| if (h2s->flags & H2_SF_BLK_MFCTL) { |
| /* stream hit the connection's flow control */ |
| LIST_DEL(&h2s->list); |
| LIST_ADDQ(&h2c->fctl_list, &h2s->list); |
| } |
| else if (!(h2s->flags & H2_SF_BLK_ANY)) { |
| LIST_DEL(&h2s->list); |
| LIST_INIT(&h2s->list); |
| if (h2s->cs) |
| h2s->cs->flags &= ~CS_FL_DATA_WR_ENA; |
| } |
| } |
| |
| if (unlikely(h2c->st0 > H2_CS_ERROR)) { |
| if (h2c->st0 == H2_CS_ERROR) { |
| if (h2c->max_id >= 0) { |
| h2c_send_goaway_error(h2c, NULL); |
| if (h2c->flags & H2_CF_MUX_BLOCK_ANY) |
| return 0; |
| } |
| |
| h2c->st0 = H2_CS_ERROR2; // sent (or failed hard) ! |
| } |
| return 1; |
| } |
| return (h2c->mws <= 0 || LIST_ISEMPTY(&h2c->fctl_list)) && LIST_ISEMPTY(&h2c->send_list); |
| } |
| |
| |
| /*********************************************************/ |
| /* functions below are I/O callbacks from the connection */ |
| /*********************************************************/ |
| |
| /* callback called on recv event by the connection handler */ |
| static void h2_recv(struct connection *conn) |
| { |
| struct h2c *h2c = conn->mux_ctx; |
| struct buffer *buf; |
| int max; |
| |
| if (conn->flags & CO_FL_ERROR) |
| return; |
| |
| if (h2c->flags & H2_CF_DEM_BLOCK_ANY) |
| return; |
| |
| buf = h2_get_dbuf(h2c); |
| if (!buf) { |
| h2c->flags |= H2_CF_DEM_DALLOC; |
| return; |
| } |
| |
| /* note: buf->o == 0 */ |
| max = buf->size - buf->i; |
| if (!max) { |
| h2c->flags |= H2_CF_DEM_DFULL; |
| return; |
| } |
| |
| conn->xprt->rcv_buf(conn, buf, max); |
| if (conn->flags & CO_FL_ERROR) |
| return; |
| |
| if (!buf->i) { |
| h2_release_dbuf(h2c); |
| return; |
| } |
| |
| if (buf->i == buf->size) |
| h2c->flags |= H2_CF_DEM_DFULL; |
| |
| h2_process_demux(h2c); |
| |
| /* after streams have been processed, we should have made some room */ |
| if (h2c->st0 >= H2_CS_ERROR) |
| buf->i = 0; |
| |
| if (buf->i != buf->size) |
| h2c->flags &= ~H2_CF_DEM_DFULL; |
| return; |
| } |
| |
| /* callback called on send event by the connection handler */ |
| static void h2_send(struct connection *conn) |
| { |
| struct h2c *h2c = conn->mux_ctx; |
| int done; |
| |
| if (conn->flags & CO_FL_ERROR) |
| return; |
| |
| if (conn->flags & (CO_FL_HANDSHAKE|CO_FL_WAIT_L4_CONN|CO_FL_WAIT_L6_CONN)) { |
| /* a handshake was requested */ |
| return; |
| } |
| |
| /* This loop is quite simple : it tries to fill as much as it can from |
| * pending streams into the existing buffer until it's reportedly full |
| * or the end of send requests is reached. Then it tries to send this |
| * buffer's contents out, marks it not full if at least one byte could |
| * be sent, and tries again. |
| * |
| * The snd_buf() function normally takes a "flags" argument which may |
| * be made of a combination of CO_SFL_MSG_MORE to indicate that more |
| * data immediately comes and CO_SFL_STREAMER to indicate that the |
| * connection is streaming lots of data (used to increase TLS record |
| * size at the expense of latency). The former can be sent any time |
| * there's a buffer full flag, as it indicates at least one stream |
| * attempted to send and failed so there are pending data. An |
| * alternative would be to set it as long as there's an active stream |
| * but that would be problematic for ACKs until we have an absolute |
| * guarantee that all waiters have at least one byte to send. The |
| * latter should possibly not be set for now. |
| */ |
| |
| done = 0; |
| while (!done) { |
| unsigned int flags = 0; |
| |
| /* fill as much as we can into the current buffer */ |
| while (((h2c->flags & (H2_CF_MUX_MFULL|H2_CF_MUX_MALLOC)) == 0) && !done) |
| done = h2_process_mux(h2c); |
| |
| if (conn->flags & CO_FL_ERROR) |
| break; |
| |
| if (h2c->flags & (H2_CF_MUX_MFULL | H2_CF_DEM_MBUSY | H2_CF_DEM_MROOM)) |
| flags |= CO_SFL_MSG_MORE; |
| |
| if (conn->xprt->snd_buf(conn, h2c->mbuf, flags) <= 0) |
| break; |
| |
| /* wrote at least one byte, the buffer is not full anymore */ |
| h2c->flags &= ~(H2_CF_MUX_MFULL | H2_CF_DEM_MROOM); |
| } |
| |
| if (conn->flags & CO_FL_SOCK_WR_SH) { |
| /* output closed, nothing to send, clear the buffer to release it */ |
| h2c->mbuf->o = 0; |
| } |
| } |
| |
| /* call the wake up function of all streams attached to the connection */ |
| static void h2_wake_all_streams(struct h2c *h2c) |
| { |
| struct eb32_node *node; |
| struct h2s *h2s; |
| unsigned int flags = 0; |
| |
| if (h2c->st0 >= H2_CS_ERROR || h2c->conn->flags & CO_FL_ERROR) |
| flags |= CS_FL_ERROR; |
| |
| if (conn_xprt_read0_pending(h2c->conn)) |
| flags |= CS_FL_EOS; |
| |
| node = eb32_first(&h2c->streams_by_id); |
| while (node) { |
| h2s = container_of(node, struct h2s, by_id); |
| node = eb32_next(node); |
| if (h2s->cs) { |
| h2s->cs->flags |= flags; |
| /* recv is used to force to detect CS_FL_EOS that wake() |
| * doesn't handle in the stream int code. |
| */ |
| h2s->cs->data_cb->recv(h2s->cs); |
| h2s->cs->data_cb->wake(h2s->cs); |
| } |
| } |
| } |
| |
| /* callback called on any event by the connection handler. |
| * It applies changes and returns zero, or < 0 if it wants immediate |
| * destruction of the connection (which normally doesn not happen in h2). |
| */ |
| static int h2_wake(struct connection *conn) |
| { |
| struct h2c *h2c = conn->mux_ctx; |
| |
| if (conn->flags & CO_FL_ERROR || conn_xprt_read0_pending(conn) || |
| h2c->st0 == H2_CS_ERROR2 || h2c->flags & H2_CF_GOAWAY_FAILED || |
| (eb_is_empty(&h2c->streams_by_id) && h2c->last_sid >= 0 && |
| h2c->max_id >= h2c->last_sid)) { |
| h2_wake_all_streams(h2c); |
| |
| if (eb_is_empty(&h2c->streams_by_id)) { |
| /* no more stream, kill the connection now */ |
| h2_release(conn); |
| return -1; |
| } |
| else { |
| /* some streams still there, we need to signal them all and |
| * wait for their departure. |
| */ |
| __conn_xprt_stop_recv(conn); |
| __conn_xprt_stop_send(conn); |
| return 0; |
| } |
| } |
| |
| if (!h2c->dbuf->i) |
| h2_release_dbuf(h2c); |
| |
| /* stop being notified of incoming data if we can't process them */ |
| if (h2c->st0 >= H2_CS_ERROR || |
| (h2c->flags & H2_CF_DEM_BLOCK_ANY) || conn_xprt_read0_pending(conn)) { |
| /* FIXME: we should clear a read timeout here */ |
| __conn_xprt_stop_recv(conn); |
| } |
| else { |
| /* FIXME: we should (re-)arm a read timeout here */ |
| __conn_xprt_want_recv(conn); |
| } |
| |
| /* adjust output polling */ |
| if (!(conn->flags & CO_FL_SOCK_WR_SH) && |
| (h2c->st0 == H2_CS_ERROR || |
| h2c->mbuf->o || |
| (h2c->mws > 0 && !LIST_ISEMPTY(&h2c->fctl_list)) || |
| (!(h2c->flags & H2_CF_MUX_BLOCK_ANY) && !LIST_ISEMPTY(&h2c->send_list)))) { |
| /* FIXME: we should (re-)arm a send timeout here */ |
| __conn_xprt_want_send(conn); |
| } |
| else { |
| /* FIXME: we should clear a send timeout here */ |
| h2_release_mbuf(h2c); |
| __conn_xprt_stop_send(conn); |
| } |
| |
| return 0; |
| } |
| |
| /*******************************************/ |
| /* functions below are used by the streams */ |
| /*******************************************/ |
| |
| /* |
| * Attach a new stream to a connection |
| * (Used for outgoing connections) |
| */ |
| static struct conn_stream *h2_attach(struct connection *conn) |
| { |
| return NULL; |
| } |
| |
| /* callback used to update the mux's polling flags after changing a cs' status. |
| * The caller (cs_update_mux_polling) will take care of propagating any changes |
| * to the transport layer. |
| */ |
| static void h2_update_poll(struct conn_stream *cs) |
| { |
| struct h2s *h2s = cs->ctx; |
| |
| if (!h2s) |
| return; |
| |
| /* we may unblock a blocked read */ |
| |
| if (cs->flags & CS_FL_DATA_RD_ENA && |
| h2s->h2c->flags & H2_CF_DEM_SFULL && h2s->h2c->dsi == h2s->id) { |
| h2s->h2c->flags &= ~H2_CF_DEM_SFULL; |
| conn_xprt_want_recv(cs->conn); |
| } |
| |
| /* Note: the stream and stream-int code doesn't allow us to perform a |
| * synchronous send() here unfortunately, because this code is called |
| * as si_update() from the process_stream() context. This means that |
| * we have to queue the current cs and defer its processing after the |
| * connection's cs list is processed anyway. |
| */ |
| |
| if (cs->flags & CS_FL_DATA_WR_ENA) { |
| if (LIST_ISEMPTY(&h2s->list)) { |
| if (LIST_ISEMPTY(&h2s->h2c->send_list) && |
| !h2s->h2c->mbuf->o && // not yet subscribed |
| !(cs->conn->flags & CO_FL_SOCK_WR_SH)) |
| conn_xprt_want_send(cs->conn); |
| LIST_ADDQ(&h2s->h2c->send_list, &h2s->list); |
| } |
| } |
| else if (!LIST_ISEMPTY(&h2s->list)) { |
| LIST_DEL(&h2s->list); |
| LIST_INIT(&h2s->list); |
| h2s->flags &= ~(H2_SF_BLK_MBUSY | H2_SF_BLK_MROOM | H2_SF_BLK_MFCTL); |
| } |
| |
| /* this can happen from within si_chk_snd() */ |
| if (h2s->h2c->mbuf->o && !(cs->conn->flags & CO_FL_XPRT_WR_ENA)) |
| conn_xprt_want_send(cs->conn); |
| } |
| |
| /* |
| * Detach the stream from the connection and possibly release the connection. |
| */ |
| static void h2_detach(struct conn_stream *cs) |
| { |
| } |
| |
| static void h2_shutr(struct conn_stream *cs, enum cs_shr_mode mode) |
| { |
| } |
| |
| static void h2_shutw(struct conn_stream *cs, enum cs_shw_mode mode) |
| { |
| } |
| |
| /* |
| * Called from the upper layer, to get more data |
| */ |
| static int h2_rcv_buf(struct conn_stream *cs, struct buffer *buf, int count) |
| { |
| /* FIXME: not handled for now */ |
| cs->flags |= CS_FL_ERROR; |
| return 0; |
| } |
| |
| /* Called from the upper layer, to send data */ |
| static int h2_snd_buf(struct conn_stream *cs, struct buffer *buf, int flags) |
| { |
| /* FIXME: not handled for now */ |
| cs->flags |= CS_FL_ERROR; |
| return 0; |
| } |
| |
| |
| /*******************************************************/ |
| /* functions below are dedicated to the config parsers */ |
| /*******************************************************/ |
| |
| /* config parser for global "tune.h2.header-table-size" */ |
| static int h2_parse_header_table_size(char **args, int section_type, struct proxy *curpx, |
| struct proxy *defpx, const char *file, int line, |
| char **err) |
| { |
| if (too_many_args(1, args, err, NULL)) |
| return -1; |
| |
| h2_settings_header_table_size = atoi(args[1]); |
| if (h2_settings_header_table_size < 4096 || h2_settings_header_table_size > 65536) { |
| memprintf(err, "'%s' expects a numeric value between 4096 and 65536.", args[0]); |
| return -1; |
| } |
| return 0; |
| } |
| |
| /* config parser for global "tune.h2.initial-window-size" */ |
| static int h2_parse_initial_window_size(char **args, int section_type, struct proxy *curpx, |
| struct proxy *defpx, const char *file, int line, |
| char **err) |
| { |
| if (too_many_args(1, args, err, NULL)) |
| return -1; |
| |
| h2_settings_initial_window_size = atoi(args[1]); |
| if (h2_settings_initial_window_size < 0) { |
| memprintf(err, "'%s' expects a positive numeric value.", args[0]); |
| return -1; |
| } |
| return 0; |
| } |
| |
| /* config parser for global "tune.h2.max-concurrent-streams" */ |
| static int h2_parse_max_concurrent_streams(char **args, int section_type, struct proxy *curpx, |
| struct proxy *defpx, const char *file, int line, |
| char **err) |
| { |
| if (too_many_args(1, args, err, NULL)) |
| return -1; |
| |
| h2_settings_max_concurrent_streams = atoi(args[1]); |
| if (h2_settings_max_concurrent_streams < 0) { |
| memprintf(err, "'%s' expects a positive numeric value.", args[0]); |
| return -1; |
| } |
| return 0; |
| } |
| |
| |
| /****************************************/ |
| /* MUX initialization and instanciation */ |
| /***************************************/ |
| |
| /* The mux operations */ |
| const struct mux_ops h2_ops = { |
| .init = h2_init, |
| .recv = h2_recv, |
| .send = h2_send, |
| .wake = h2_wake, |
| .update_poll = h2_update_poll, |
| .rcv_buf = h2_rcv_buf, |
| .snd_buf = h2_snd_buf, |
| .attach = h2_attach, |
| .detach = h2_detach, |
| .shutr = h2_shutr, |
| .shutw = h2_shutw, |
| .release = h2_release, |
| .name = "H2", |
| }; |
| |
| /* ALPN selection : this mux registers ALPN tolen "h2" */ |
| static struct alpn_mux_list alpn_mux_h2 = |
| { .token = IST("h2"), .mode = ALPN_MODE_HTTP, .mux = &h2_ops }; |
| |
| /* config keyword parsers */ |
| static struct cfg_kw_list cfg_kws = {ILH, { |
| { CFG_GLOBAL, "tune.h2.header-table-size", h2_parse_header_table_size }, |
| { CFG_GLOBAL, "tune.h2.initial-window-size", h2_parse_initial_window_size }, |
| { CFG_GLOBAL, "tune.h2.max-concurrent-streams", h2_parse_max_concurrent_streams }, |
| { 0, NULL, NULL } |
| }}; |
| |
| static void __h2_deinit(void) |
| { |
| pool_destroy2(pool2_h2s); |
| pool_destroy2(pool2_h2c); |
| } |
| |
| __attribute__((constructor)) |
| static void __h2_init(void) |
| { |
| alpn_register_mux(&alpn_mux_h2); |
| cfg_register_keywords(&cfg_kws); |
| hap_register_post_deinit(__h2_deinit); |
| pool2_h2c = create_pool("h2c", sizeof(struct h2c), MEM_F_SHARED); |
| pool2_h2s = create_pool("h2s", sizeof(struct h2s), MEM_F_SHARED); |
| } |