blob: 7c1cf4c535708931344875ef88060f84509dd177 [file] [log] [blame]
/*
* FD polling functions for Speculative I/O combined with Linux epoll()
*
* Copyright 2000-2011 Willy Tarreau <w@1wt.eu>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*
* This code implements "speculative I/O" under Linux. The principle is to
* try to perform expected I/O before registering the events in the poller.
* Each time this succeeds, it saves an expensive epoll_ctl(). It generally
* succeeds for all reads after an accept(), and for writes after a connect().
* It also improves performance for streaming connections because even if only
* one side is polled, the other one may react accordingly depending on the
* level of the buffer.
*
* It has a presents drawbacks though. If too many events are set for spec I/O,
* those ones can starve the polled events. Experiments show that when polled
* events starve, they quickly turn into spec I/O, making the situation even
* worse. While we can reduce the number of polled events processed at once,
* we cannot do this on speculative events because most of them are new ones
* (avg 2/3 new - 1/3 old from experiments).
*
* The solution against this problem relies on those two factors :
* 1) one FD registered as a spec event cannot be polled at the same time
* 2) even during very high loads, we will almost never be interested in
* simultaneous read and write streaming on the same FD.
*
* The first point implies that during starvation, we will not have more than
* half of our FDs in the poll list, otherwise it means there is less than that
* in the spec list, implying there is no starvation.
*
* The second point implies that we're statically only interested in half of
* the maximum number of file descriptors at once, because we will unlikely
* have simultaneous read and writes for a same buffer during long periods.
*
* So, if we make it possible to drain maxsock/2/2 during peak loads, then we
* can ensure that there will be no starvation effect. This means that we must
* always allocate maxsock/4 events for the poller.
*
*
*/
#include <unistd.h>
#include <sys/time.h>
#include <sys/types.h>
#include <common/compat.h>
#include <common/config.h>
#include <common/debug.h>
#include <common/epoll.h>
#include <common/standard.h>
#include <common/ticks.h>
#include <common/time.h>
#include <common/tools.h>
#include <types/global.h>
#include <proto/fd.h>
#include <proto/signal.h>
#include <proto/task.h>
/*
* We define 4 states for each direction of a file descriptor, which we store
* as 2 bits :
*
* 00 = IDLE : we're not interested in this event
* 01 = SPEC : perform speculative I/O on this FD
* 10 = WAIT : really wait for an availability event on this FD (poll)
* 11 = STOP : was marked WAIT, but disabled. It can switch back to WAIT if
* the application changes its mind, otherwise disable FD polling
* and switch back to IDLE.
*
* Since we do not want to scan all the FD list to find speculative I/O events,
* we store them in a list consisting in a linear array holding only the FD
* indexes right now. Note that a closed FD cannot exist in the spec list,
* because it is closed by fd_delete() which in turn calls __fd_clo() which
* always removes it from the list.
*
* The STOP state requires the event to be present in the spec list so that
* it can be detected and flushed upon next scan without having to scan the
* whole FD list.
*
* This translates like this :
*
* EVENT_IN_SPEC_LIST = 01
* EVENT_IN_POLL_LIST = 10
*
* IDLE = 0
* SPEC = (EVENT_IN_SPEC_LIST)
* WAIT = (EVENT_IN_POLL_LIST)
* STOP = (EVENT_IN_SPEC_LIST|EVENT_IN_POLL_LIST)
*
* fd_is_set() just consists in checking that the status is 01 or 10.
*
* For efficiency reasons, we will store the Read and Write bits interlaced to
* form a 4-bit field, so that we can simply shift the value right by 0/1 and
* get what we want :
* 3 2 1 0
* Wp Rp Ws Rs
*
* The FD array has to hold a back reference to the speculative list. This
* reference is only valid if at least one of the directions is marked SPEC.
*
* We store the FD state in the 4 lower bits of fdtab[fd].spec.e, and save the
* previous state upon changes in the 4 higher bits, so that changes are easy
* to spot.
*/
#define FD_EV_IN_SL 1U
#define FD_EV_IN_PL 4U
#define FD_EV_IDLE 0
#define FD_EV_SPEC (FD_EV_IN_SL)
#define FD_EV_WAIT (FD_EV_IN_PL)
#define FD_EV_STOP (FD_EV_IN_SL|FD_EV_IN_PL)
/* Those match any of R or W for Spec list or Poll list */
#define FD_EV_RW_SL (FD_EV_IN_SL | (FD_EV_IN_SL << 1))
#define FD_EV_RW_PL (FD_EV_IN_PL | (FD_EV_IN_PL << 1))
#define FD_EV_MASK_DIR (FD_EV_IN_SL|FD_EV_IN_PL)
#define FD_EV_IDLE_R 0
#define FD_EV_SPEC_R (FD_EV_IN_SL)
#define FD_EV_WAIT_R (FD_EV_IN_PL)
#define FD_EV_STOP_R (FD_EV_IN_SL|FD_EV_IN_PL)
#define FD_EV_MASK_R (FD_EV_IN_SL|FD_EV_IN_PL)
#define FD_EV_IDLE_W (FD_EV_IDLE_R << 1)
#define FD_EV_SPEC_W (FD_EV_SPEC_R << 1)
#define FD_EV_WAIT_W (FD_EV_WAIT_R << 1)
#define FD_EV_STOP_W (FD_EV_STOP_R << 1)
#define FD_EV_MASK_W (FD_EV_MASK_R << 1)
#define FD_EV_MASK (FD_EV_MASK_W | FD_EV_MASK_R)
#define FD_EV_MASK_OLD (FD_EV_MASK << 4)
/* This is the minimum number of events successfully processed in speculative
* mode above which we agree to return without checking epoll() (1/2 times).
*/
#define MIN_RETURN_EVENTS 25
static int nbspec = 0; // current size of the spec list
static int absmaxevents = 0; // absolute maximum amounts of polled events
static unsigned int *spec_list = NULL; // speculative I/O list
/* private data */
static struct epoll_event *epoll_events;
static int epoll_fd;
/* This structure may be used for any purpose. Warning! do not use it in
* recursive functions !
*/
static struct epoll_event ev;
REGPRM1 static inline void alloc_spec_entry(const int fd)
{
if (fdtab[fd].spec.s1)
/* sometimes the entry already exists for the other direction */
return;
fdtab[fd].spec.s1 = nbspec + 1;
spec_list[nbspec] = fd;
nbspec++;
}
/* Removes entry used by fd <fd> from the spec list and replaces it with the
* last one. The fdtab.spec is adjusted to match the back reference if needed.
* If the fd has no entry assigned, return immediately.
*/
REGPRM1 static void release_spec_entry(int fd)
{
unsigned int pos;
pos = fdtab[fd].spec.s1;
if (!pos)
return;
fdtab[fd].spec.s1 = 0;
pos--;
/* we have spec_list[pos]==fd */
nbspec--;
if (pos == nbspec)
return;
/* we replace current FD by the highest one, which may sometimes be the same */
fd = spec_list[nbspec];
spec_list[pos] = fd;
fdtab[fd].spec.s1 = pos + 1;
}
/*
* Returns non-zero if <fd> is already monitored for events in direction <dir>.
*/
REGPRM2 static int __fd_is_set(const int fd, int dir)
{
int ret;
#if DEBUG_DEV
if (!fdtab[fd].owner) {
fprintf(stderr, "sepoll.fd_isset called on closed fd #%d.\n", fd);
ABORT_NOW();
}
#endif
ret = ((unsigned)fdtab[fd].spec.e >> dir) & FD_EV_MASK_DIR;
return (ret == FD_EV_SPEC || ret == FD_EV_WAIT);
}
/*
* Don't worry about the strange constructs in __fd_set/__fd_clr, they are
* designed like this in order to reduce the number of jumps (verified).
*/
REGPRM2 static void __fd_wai(const int fd, int dir)
{
unsigned int i;
#if DEBUG_DEV
if (!fdtab[fd].owner) {
fprintf(stderr, "sepoll.fd_wai called on closed fd #%d.\n", fd);
ABORT_NOW();
}
#endif
i = ((unsigned)fdtab[fd].spec.e >> dir) & FD_EV_MASK_DIR;
if (!(i & FD_EV_IN_SL)) {
if (i == FD_EV_WAIT)
return; /* already in desired state */
alloc_spec_entry(fd); /* need a spec entry */
}
fdtab[fd].spec.e ^= (i ^ (unsigned int)FD_EV_IN_PL) << dir;
}
REGPRM2 static void __fd_set(const int fd, int dir)
{
unsigned int i;
#if DEBUG_DEV
if (!fdtab[fd].owner) {
fprintf(stderr, "sepoll.fd_set called on closed fd #%d.\n", fd);
ABORT_NOW();
}
#endif
i = ((unsigned)fdtab[fd].spec.e >> dir) & FD_EV_MASK_DIR;
if (i != FD_EV_STOP) {
if (unlikely(i != FD_EV_IDLE))
return;
// switch to SPEC state and allocate a SPEC entry.
alloc_spec_entry(fd);
}
fdtab[fd].spec.e ^= (unsigned int)(FD_EV_IN_SL << dir);
}
REGPRM2 static void __fd_clr(const int fd, int dir)
{
unsigned int i;
#if DEBUG_DEV
if (!fdtab[fd].owner) {
fprintf(stderr, "sepoll.fd_clr called on closed fd #%d.\n", fd);
ABORT_NOW();
}
#endif
i = ((unsigned)fdtab[fd].spec.e >> dir) & FD_EV_MASK_DIR;
if (i != FD_EV_SPEC) {
if (unlikely(i != FD_EV_WAIT))
return;
// switch to STOP state
/* We will create a queue entry for this one because we want to
* process it later in order to merge it with other events on
* the same FD.
*/
alloc_spec_entry(fd);
}
fdtab[fd].spec.e ^= (unsigned int)(FD_EV_IN_SL << dir);
}
/* normally unused */
REGPRM1 static void __fd_rem(int fd)
{
__fd_clr(fd, DIR_RD);
__fd_clr(fd, DIR_WR);
}
/*
* On valid epoll() implementations, a call to close() automatically removes
* the fds. This means that the FD will appear as previously unset.
*/
REGPRM1 static void __fd_clo(int fd)
{
release_spec_entry(fd);
fdtab[fd].spec.e &= ~(FD_EV_MASK | FD_EV_MASK_OLD);
}
/*
* speculative epoll() poller
*/
REGPRM2 static void _do_poll(struct poller *p, int exp)
{
int status, eo, en;
int fd, opcode;
int count;
int spec_idx;
int wait_time;
/* first, update the poll list according to what changed in the spec list */
spec_idx = nbspec;
while (likely(spec_idx > 0)) {
spec_idx--;
fd = spec_list[spec_idx];
en = fdtab[fd].spec.e & 15; /* new events */
eo = fdtab[fd].spec.e >> 4; /* previous events */
/* If an fd with a poll bit is present here, it means that it
* has last requested a poll, or is leaving from a poll. Given
* that an FD is fully in the poll list or in the spec list but
* not in both at once, we'll first ensure that if it is
* already being polled in one direction and requests a spec
* access, then we'll turn that into a polled access in order
* to save a syscall which will likely return EAGAIN.
*/
if ((en & FD_EV_RW_PL) && (en & FD_EV_RW_SL)) {
/* convert SPEC to WAIT if fd already being polled */
if ((en & FD_EV_MASK_R) == FD_EV_SPEC_R)
en = (en & ~FD_EV_MASK_R) | FD_EV_WAIT_R;
if ((en & FD_EV_MASK_W) == FD_EV_SPEC_W)
en = (en & ~FD_EV_MASK_W) | FD_EV_WAIT_W;
}
if ((en & FD_EV_MASK_R) == FD_EV_STOP_R) {
/* This FD was being polled and is now being removed. */
en &= ~FD_EV_MASK_R;
}
if ((en & FD_EV_MASK_W) == FD_EV_STOP_W) {
/* This FD was being polled and is now being removed. */
en &= ~FD_EV_MASK_W;
}
if ((eo ^ en) & FD_EV_RW_PL) {
/* poll status changed */
if ((en & FD_EV_RW_PL) == 0) {
/* fd removed from poll list */
opcode = EPOLL_CTL_DEL;
}
else if ((eo & FD_EV_RW_PL) == 0) {
/* new fd in the poll list */
opcode = EPOLL_CTL_ADD;
}
else {
/* fd status changed */
opcode = EPOLL_CTL_MOD;
}
/* construct the epoll events based on new state */
ev.events = 0;
if (en & FD_EV_WAIT_R)
ev.events |= EPOLLIN;
if (en & FD_EV_WAIT_W)
ev.events |= EPOLLOUT;
ev.data.fd = fd;
epoll_ctl(epoll_fd, opcode, fd, &ev);
}
fdtab[fd].spec.e = (en << 4) + en; /* save new events */
if (!(fdtab[fd].spec.e & FD_EV_RW_SL)) {
/* This fd switched to combinations of either WAIT or
* IDLE. It must be removed from the spec list.
*/
release_spec_entry(fd);
}
}
/* compute the epoll_wait() timeout */
if (nbspec || run_queue || signal_queue_len) {
/* Maybe we still have events in the spec list, or there are
* some tasks left pending in the run_queue, so we must not
* wait in epoll() otherwise we would delay their delivery by
* the next timeout.
*/
wait_time = 0;
}
else {
if (!exp)
wait_time = MAX_DELAY_MS;
else if (tick_is_expired(exp, now_ms))
wait_time = 0;
else {
wait_time = TICKS_TO_MS(tick_remain(now_ms, exp)) + 1;
if (wait_time > MAX_DELAY_MS)
wait_time = MAX_DELAY_MS;
}
}
/* now let's wait for real events */
fd = MIN(maxfd, global.tune.maxpollevents);
gettimeofday(&before_poll, NULL);
status = epoll_wait(epoll_fd, epoll_events, fd, wait_time);
tv_update_date(wait_time, status);
measure_idle();
/* process events */
for (count = 0; count < status; count++) {
int e = epoll_events[count].events;
fd = epoll_events[count].data.fd;
if (!fdtab[fd].owner)
continue;
/* it looks complicated but gcc can optimize it away when constants
* have same values.
*/
fdtab[fd].ev &= FD_POLL_STICKY;
fdtab[fd].ev |=
((e & EPOLLIN ) ? FD_POLL_IN : 0) |
((e & EPOLLPRI) ? FD_POLL_PRI : 0) |
((e & EPOLLOUT) ? FD_POLL_OUT : 0) |
((e & EPOLLERR) ? FD_POLL_ERR : 0) |
((e & EPOLLHUP) ? FD_POLL_HUP : 0);
if (fdtab[fd].iocb && fdtab[fd].owner && fdtab[fd].ev)
fdtab[fd].iocb(fd);
}
/* now process speculative events if any */
/* Here we have two options :
* - either walk the list forwards and hope to match more events
* - or walk it backwards to minimize the number of changes and
* to make better use of the cache.
* Tests have shown that walking backwards improves perf by 0.2%.
*/
spec_idx = nbspec;
while (likely(spec_idx > 0)) {
spec_idx--;
fd = spec_list[spec_idx];
eo = fdtab[fd].spec.e; /* save old events */
/*
* Process the speculative events.
*
* Principle: events which are marked FD_EV_SPEC are processed
* with their assigned function. If the function returns 0, it
* means there is nothing doable without polling first. We will
* then convert the event to a pollable one by assigning them
* the WAIT status.
*/
fdtab[fd].ev &= FD_POLL_STICKY;
if ((eo & FD_EV_MASK_R) == FD_EV_SPEC_R)
fdtab[fd].ev |= FD_POLL_IN;
if ((eo & FD_EV_MASK_W) == FD_EV_SPEC_W)
fdtab[fd].ev |= FD_POLL_OUT;
if (fdtab[fd].iocb && fdtab[fd].owner && fdtab[fd].ev)
fdtab[fd].iocb(fd);
/* one callback might already have closed the fd by itself */
if (!fdtab[fd].owner)
continue;
if (!(fdtab[fd].spec.e & (FD_EV_RW_SL|FD_EV_RW_PL))) {
/* This fd switched to IDLE, it can be removed from the spec list. */
release_spec_entry(fd);
continue;
}
}
/* in the end, we have processed status + spec_processed FDs */
}
/*
* Initialization of the speculative epoll() poller.
* Returns 0 in case of failure, non-zero in case of success. If it fails, it
* disables the poller by setting its pref to 0.
*/
REGPRM1 static int _do_init(struct poller *p)
{
__label__ fail_spec, fail_ee, fail_fd;
p->private = NULL;
epoll_fd = epoll_create(global.maxsock + 1);
if (epoll_fd < 0)
goto fail_fd;
/* See comments at the top of the file about this formula. */
absmaxevents = MAX(global.tune.maxpollevents, global.maxsock/4);
epoll_events = (struct epoll_event*)
calloc(1, sizeof(struct epoll_event) * absmaxevents);
if (epoll_events == NULL)
goto fail_ee;
if ((spec_list = (uint32_t *)calloc(1, sizeof(uint32_t) * global.maxsock)) == NULL)
goto fail_spec;
return 1;
fail_spec:
free(epoll_events);
fail_ee:
close(epoll_fd);
epoll_fd = -1;
fail_fd:
p->pref = 0;
return 0;
}
/*
* Termination of the speculative epoll() poller.
* Memory is released and the poller is marked as unselectable.
*/
REGPRM1 static void _do_term(struct poller *p)
{
free(spec_list);
free(epoll_events);
if (epoll_fd >= 0) {
close(epoll_fd);
epoll_fd = -1;
}
spec_list = NULL;
epoll_events = NULL;
p->private = NULL;
p->pref = 0;
}
/*
* Check that the poller works.
* Returns 1 if OK, otherwise 0.
*/
REGPRM1 static int _do_test(struct poller *p)
{
int fd;
fd = epoll_create(global.maxsock + 1);
if (fd < 0)
return 0;
close(fd);
return 1;
}
/*
* Recreate the epoll file descriptor after a fork(). Returns 1 if OK,
* otherwise 0. It will ensure that all processes will not share their
* epoll_fd. Some side effects were encountered because of this, such
* as epoll_wait() returning an FD which was previously deleted.
*/
REGPRM1 static int _do_fork(struct poller *p)
{
if (epoll_fd >= 0)
close(epoll_fd);
epoll_fd = epoll_create(global.maxsock + 1);
if (epoll_fd < 0)
return 0;
return 1;
}
/*
* It is a constructor, which means that it will automatically be called before
* main(). This is GCC-specific but it works at least since 2.95.
* Special care must be taken so that it does not need any uninitialized data.
*/
__attribute__((constructor))
static void _do_register(void)
{
struct poller *p;
if (nbpollers >= MAX_POLLERS)
return;
epoll_fd = -1;
p = &pollers[nbpollers++];
p->name = "sepoll";
p->pref = 400;
p->private = NULL;
p->test = _do_test;
p->init = _do_init;
p->term = _do_term;
p->poll = _do_poll;
p->fork = _do_fork;
p->is_set = __fd_is_set;
p->set = __fd_set;
p->wai = __fd_wai;
p->clr = __fd_clr;
p->rem = __fd_rem;
p->clo = __fd_clo;
}
/*
* Local variables:
* c-indent-level: 8
* c-basic-offset: 8
* End:
*/