blob: 359b9212d2a94ec6fdf7c660005080ed9fc73072 [file] [log] [blame]
/*
* Health-checks.
*
* Copyright 2008-2009 Krzysztof Piotr Oledzki <ole@ans.pl>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#ifndef _TYPES_CHECKS_H
#define _TYPES_CHECKS_H
#include <sys/time.h>
#include <common/config.h>
#include <common/mini-clist.h>
#include <common/regex.h>
#include <common/buffer.h>
#include <types/connection.h>
#include <types/obj_type.h>
#include <types/task.h>
/* enum used by check->result. Must remain in this order, as some code uses
* result >= CHK_RES_PASSED to declare success.
*/
enum chk_result {
CHK_RES_UNKNOWN = 0, /* initialized to this by default */
CHK_RES_NEUTRAL, /* valid check but no status information */
CHK_RES_FAILED, /* check failed */
CHK_RES_PASSED, /* check succeeded and server is fully up again */
CHK_RES_CONDPASS, /* check reports the server doesn't want new sessions */
};
/* flags used by check->state */
#define CHK_ST_INPROGRESS 0x0001 /* a check is currently running */
#define CHK_ST_CONFIGURED 0x0002 /* this check is configured and may be enabled */
#define CHK_ST_ENABLED 0x0004 /* this check is currently administratively enabled */
#define CHK_ST_PAUSED 0x0008 /* checks are paused because of maintenance (health only) */
#define CHK_ST_AGENT 0x0010 /* check is an agent check (otherwise it's a health check) */
#define CHK_ST_PORT_MISS 0x0020 /* check can't be send because no port is configured to run it */
/* check status */
enum {
HCHK_STATUS_UNKNOWN = 0, /* Unknown */
HCHK_STATUS_INI, /* Initializing */
HCHK_STATUS_START, /* Check started - SPECIAL STATUS */
/* Below we have finished checks */
HCHK_STATUS_CHECKED, /* DUMMY STATUS */
HCHK_STATUS_HANA, /* Health analyze detected enough consecutive errors */
HCHK_STATUS_SOCKERR, /* Socket error */
HCHK_STATUS_L4OK, /* L4 check passed, for example tcp connect */
HCHK_STATUS_L4TOUT, /* L4 timeout */
HCHK_STATUS_L4CON, /* L4 connection problem, for example: */
/* "Connection refused" (tcp rst) or "No route to host" (icmp) */
HCHK_STATUS_L6OK, /* L6 check passed */
HCHK_STATUS_L6TOUT, /* L6 (SSL) timeout */
HCHK_STATUS_L6RSP, /* L6 invalid response - protocol error */
HCHK_STATUS_L7TOUT, /* L7 (HTTP/SMTP) timeout */
HCHK_STATUS_L7RSP, /* L7 invalid response - protocol error */
/* Below we have layer 5-7 data available */
HCHK_STATUS_L57DATA, /* DUMMY STATUS */
HCHK_STATUS_L7OKD, /* L7 check passed */
HCHK_STATUS_L7OKCD, /* L7 check conditionally passed */
HCHK_STATUS_L7STS, /* L7 response error, for example HTTP 5xx */
HCHK_STATUS_PROCERR, /* External process check failure */
HCHK_STATUS_PROCTOUT, /* External process check timeout */
HCHK_STATUS_PROCOK, /* External process check passed */
HCHK_STATUS_SIZE
};
/* environment variables memory requirement for different types of data */
#define EXTCHK_SIZE_EVAL_INIT 0 /* size determined during the init phase,
* such environment variables are not updatable. */
#define EXTCHK_SIZE_ULONG 20 /* max string length for an unsigned long value */
/* external checks environment variables */
enum {
EXTCHK_PATH = 0,
/* Proxy specific environment variables */
EXTCHK_HAPROXY_PROXY_NAME, /* the backend name */
EXTCHK_HAPROXY_PROXY_ID, /* the backend id */
EXTCHK_HAPROXY_PROXY_ADDR, /* the first bind address if available (or empty) */
EXTCHK_HAPROXY_PROXY_PORT, /* the first bind port if available (or empty) */
/* Server specific environment variables */
EXTCHK_HAPROXY_SERVER_NAME, /* the server name */
EXTCHK_HAPROXY_SERVER_ID, /* the server id */
EXTCHK_HAPROXY_SERVER_ADDR, /* the server address */
EXTCHK_HAPROXY_SERVER_PORT, /* the server port if available (or empty) */
EXTCHK_HAPROXY_SERVER_MAXCONN, /* the server max connections */
EXTCHK_HAPROXY_SERVER_CURCONN, /* the current number of connections on the server */
EXTCHK_SIZE
};
/* health status for response tracking */
enum {
HANA_STATUS_UNKNOWN = 0,
HANA_STATUS_L4_OK, /* L4 successful connection */
HANA_STATUS_L4_ERR, /* L4 unsuccessful connection */
HANA_STATUS_HTTP_OK, /* Correct http response */
HANA_STATUS_HTTP_STS, /* Wrong http response, for example HTTP 5xx */
HANA_STATUS_HTTP_HDRRSP, /* Invalid http response (headers) */
HANA_STATUS_HTTP_RSP, /* Invalid http response */
HANA_STATUS_HTTP_READ_ERROR, /* Read error */
HANA_STATUS_HTTP_READ_TIMEOUT, /* Read timeout */
HANA_STATUS_HTTP_BROKEN_PIPE, /* Unexpected close from server */
HANA_STATUS_SIZE
};
enum {
HANA_ONERR_UNKNOWN = 0,
HANA_ONERR_FASTINTER, /* Force fastinter*/
HANA_ONERR_FAILCHK, /* Simulate a failed check */
HANA_ONERR_SUDDTH, /* Enters sudden death - one more failed check will mark this server down */
HANA_ONERR_MARKDWN, /* Mark this server down, now! */
};
enum {
HANA_ONMARKEDDOWN_NONE = 0,
HANA_ONMARKEDDOWN_SHUTDOWNSESSIONS, /* Shutdown peer sessions */
};
enum {
HANA_ONMARKEDUP_NONE = 0,
HANA_ONMARKEDUP_SHUTDOWNBACKUPSESSIONS, /* Shutdown peer sessions */
};
enum {
HANA_OBS_NONE = 0,
HANA_OBS_LAYER4, /* Observe L4 - for example tcp */
HANA_OBS_LAYER7, /* Observe L7 - for example http */
HANA_OBS_SIZE
};
struct check {
struct xprt_ops *xprt; /* transport layer operations for health checks */
struct conn_stream *cs; /* conn_stream state for health checks */
struct buffer bi, bo; /* input and output buffers to send/recv check */
struct task *task; /* the task associated to the health check processing, NULL if disabled */
struct timeval start; /* last health check start time */
long duration; /* time in ms took to finish last health check */
short status, code; /* check result, check code */
unsigned short port; /* the port to use for the health checks */
char desc[HCHK_DESC_LEN]; /* health check description */
int use_ssl; /* use SSL for health checks */
int send_proxy; /* send a PROXY protocol header with checks */
struct list *tcpcheck_rules; /* tcp-check send / expect rules */
struct tcpcheck_rule *current_step; /* current step when using tcpcheck */
struct tcpcheck_rule *last_started_step;/* pointer to latest tcpcheck rule started */
int inter, fastinter, downinter; /* checks: time in milliseconds */
enum chk_result result; /* health-check result : CHK_RES_* */
int state; /* state of the check : CHK_ST_* */
int health; /* 0 to rise-1 = bad;
* rise to rise+fall-1 = good */
int rise, fall; /* time in iterations */
int type; /* Check type, one of PR_O2_*_CHK */
int send_string_len; /* length of agent command string */
char *send_string; /* optionally send a string when connecting to the agent */
struct server *server; /* back-pointer to server */
char **argv; /* the arguments to use if running a process-based check */
char **envp; /* the environment to use if running a process-based check */
struct pid_list *curpid; /* entry in pid_list used for current process-based test, or -1 if not in test */
struct sockaddr_storage addr; /* the address to check */
char *sni; /* Server name */
};
struct check_status {
short result; /* one of SRV_CHK_* */
char *info; /* human readable short info */
char *desc; /* long description */
};
struct extcheck_env {
char *name; /* environment variable name */
int vmaxlen; /* value maximum length, used to determine the required memory allocation */
};
struct analyze_status {
char *desc; /* description */
unsigned char lr[HANA_OBS_SIZE]; /* result for l4/l7: 0 = ignore, 1 - error, 2 - OK */
};
/* possible actions for tcpcheck_rule->action */
enum {
TCPCHK_ACT_SEND = 0, /* send action, regular string format */
TCPCHK_ACT_EXPECT, /* expect action, either regular or binary string */
TCPCHK_ACT_CONNECT, /* connect action, to probe a new port */
TCPCHK_ACT_COMMENT, /* no action, simply a comment used for logs */
};
/* flags used by tcpcheck_rule->conn_opts */
#define TCPCHK_OPT_NONE 0x0000 /* no options specified, default */
#define TCPCHK_OPT_SEND_PROXY 0x0001 /* send proxy-protocol string */
#define TCPCHK_OPT_SSL 0x0002 /* SSL connection */
struct tcpcheck_rule {
struct list list; /* list linked to from the proxy */
int action; /* action: send or expect */
char *comment; /* comment to be used in the logs and on the stats socket */
/* match type uses NON-NULL pointer from either string or expect_regex below */
/* sent string is string */
char *string; /* sent or expected string */
int string_len; /* string lenght */
struct my_regex *expect_regex; /* expected */
int inverse; /* 0 = regular match, 1 = inverse match */
unsigned short port; /* port to connect to */
unsigned short conn_opts; /* options when setting up a new connection */
};
#endif /* _TYPES_CHECKS_H */