| /* |
| * HTT/1 mux-demux for connections |
| * |
| * Copyright 2018 Christopher Faulet <cfaulet@haproxy.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| #include <haproxy/api.h> |
| #include <haproxy/istbuf.h> |
| #include <common/cfgparse.h> |
| #include <haproxy/connection.h> |
| #include <haproxy/h1.h> |
| #include <haproxy/h1_htx.h> |
| #include <haproxy/h2.h> |
| #include <haproxy/htx.h> |
| |
| #include <import/ebistree.h> |
| |
| #include <haproxy/pipe-t.h> |
| #include <types/proxy.h> |
| |
| #include <haproxy/http_htx.h> |
| #include <proto/log.h> |
| #include <haproxy/session-t.h> |
| #include <proto/stream.h> |
| #include <proto/stream_interface.h> |
| #include <haproxy/trace.h> |
| |
| /* |
| * H1 Connection flags (32 bits) |
| */ |
| #define H1C_F_NONE 0x00000000 |
| |
| /* Flags indicating why writing output data are blocked */ |
| #define H1C_F_OUT_ALLOC 0x00000001 /* mux is blocked on lack of output buffer */ |
| #define H1C_F_OUT_FULL 0x00000002 /* mux is blocked on output buffer full */ |
| /* 0x00000004 - 0x00000008 unused */ |
| |
| /* Flags indicating why reading input data are blocked. */ |
| #define H1C_F_IN_ALLOC 0x00000010 /* mux is blocked on lack of input buffer */ |
| #define H1C_F_IN_FULL 0x00000020 /* mux is blocked on input buffer full */ |
| #define H1C_F_IN_BUSY 0x00000040 /* mux is blocked on input waiting the other side */ |
| /* 0x00000040 - 0x00000800 unused */ |
| |
| /* Flags indicating the connection state */ |
| #define H1C_F_CS_ERROR 0x00001000 /* connection must be closed ASAP because an error occurred */ |
| #define H1C_F_CS_SHUTW_NOW 0x00002000 /* connection must be shut down for writes ASAP */ |
| #define H1C_F_CS_SHUTDOWN 0x00004000 /* connection is shut down */ |
| #define H1C_F_CS_IDLE 0x00008000 /* connection is idle and may be reused |
| * (exclusive to all H1C_F_CS flags and never set when an h1s is attached) */ |
| |
| #define H1C_F_WAIT_NEXT_REQ 0x00010000 /* waiting for the next request to start, use keep-alive timeout */ |
| #define H1C_F_UPG_H2C 0x00020000 /* set if an upgrade to h2 should be done */ |
| |
| #define H1C_F_CO_MSG_MORE 0x00040000 /* set if CO_SFL_MSG_MORE must be set when calling xprt->snd_buf() */ |
| #define H1C_F_CO_STREAMER 0x00080000 /* set if CO_SFL_STREAMER must be set when calling xprt->snd_buf() */ |
| |
| /* |
| * H1 Stream flags (32 bits) |
| */ |
| #define H1S_F_NONE 0x00000000 |
| #define H1S_F_ERROR 0x00000001 /* An error occurred on the H1 stream */ |
| #define H1S_F_REQ_ERROR 0x00000002 /* An error occurred during the request parsing/xfer */ |
| #define H1S_F_RES_ERROR 0x00000004 /* An error occurred during the response parsing/xfer */ |
| #define H1S_F_REOS 0x00000008 /* End of input stream seen even if not delivered yet */ |
| #define H1S_F_WANT_KAL 0x00000010 |
| #define H1S_F_WANT_TUN 0x00000020 |
| #define H1S_F_WANT_CLO 0x00000040 |
| #define H1S_F_WANT_MSK 0x00000070 |
| #define H1S_F_NOT_FIRST 0x00000080 /* The H1 stream is not the first one */ |
| #define H1S_F_BUF_FLUSH 0x00000100 /* Flush input buffer and don't read more data */ |
| #define H1S_F_SPLICED_DATA 0x00000200 /* Set when the kernel splicing is in used */ |
| #define H1S_F_PARSING_DONE 0x00000400 /* Set when incoming message parsing is finished (EOM added) */ |
| /* 0x00000800 .. 0x00001000 unused */ |
| #define H1S_F_HAVE_SRV_NAME 0x00002000 /* Set during output process if the server name header was added to the request */ |
| #define H1S_F_HAVE_O_CONN 0x00004000 /* Set during output process to know connection mode was processed */ |
| |
| /* H1 connection descriptor */ |
| struct h1c { |
| struct connection *conn; |
| struct proxy *px; |
| uint32_t flags; /* Connection flags: H1C_F_* */ |
| |
| struct buffer ibuf; /* Input buffer to store data before parsing */ |
| struct buffer obuf; /* Output buffer to store data after reformatting */ |
| |
| struct buffer_wait buf_wait; /* Wait list for buffer allocation */ |
| struct wait_event wait_event; /* To be used if we're waiting for I/Os */ |
| |
| struct h1s *h1s; /* H1 stream descriptor */ |
| struct task *task; /* timeout management task */ |
| int timeout; /* idle timeout duration in ticks */ |
| int shut_timeout; /* idle timeout duration in ticks after stream shutdown */ |
| }; |
| |
| /* H1 stream descriptor */ |
| struct h1s { |
| struct h1c *h1c; |
| struct conn_stream *cs; |
| struct cs_info csinfo; /* CS info, only used for client connections */ |
| uint32_t flags; /* Connection flags: H1S_F_* */ |
| |
| struct wait_event *subs; /* Address of the wait_event the conn_stream associated is waiting on */ |
| |
| struct session *sess; /* Associated session */ |
| struct h1m req; |
| struct h1m res; |
| |
| enum http_meth_t meth; /* HTTP resquest method */ |
| uint16_t status; /* HTTP response status */ |
| }; |
| |
| /* Map of headers used to convert outgoing headers */ |
| struct h1_hdrs_map { |
| char *name; |
| struct eb_root map; |
| }; |
| |
| /* An entry in a headers map */ |
| struct h1_hdr_entry { |
| struct ist name; |
| struct ebpt_node node; |
| }; |
| |
| /* Declare the headers map */ |
| static struct h1_hdrs_map hdrs_map = { .name = NULL, .map = EB_ROOT }; |
| |
| |
| /* trace source and events */ |
| static void h1_trace(enum trace_level level, uint64_t mask, |
| const struct trace_source *src, |
| const struct ist where, const struct ist func, |
| const void *a1, const void *a2, const void *a3, const void *a4); |
| |
| /* The event representation is split like this : |
| * h1c - internal H1 connection |
| * h1s - internal H1 stream |
| * strm - application layer |
| * rx - data receipt |
| * tx - data transmission |
| * |
| */ |
| static const struct trace_event h1_trace_events[] = { |
| #define H1_EV_H1C_NEW (1ULL << 0) |
| { .mask = H1_EV_H1C_NEW, .name = "h1c_new", .desc = "new H1 connection" }, |
| #define H1_EV_H1C_RECV (1ULL << 1) |
| { .mask = H1_EV_H1C_RECV, .name = "h1c_recv", .desc = "Rx on H1 connection" }, |
| #define H1_EV_H1C_SEND (1ULL << 2) |
| { .mask = H1_EV_H1C_SEND, .name = "h1c_send", .desc = "Tx on H1 connection" }, |
| #define H1_EV_H1C_BLK (1ULL << 3) |
| { .mask = H1_EV_H1C_BLK, .name = "h1c_blk", .desc = "H1 connection blocked" }, |
| #define H1_EV_H1C_WAKE (1ULL << 4) |
| { .mask = H1_EV_H1C_WAKE, .name = "h1c_wake", .desc = "H1 connection woken up" }, |
| #define H1_EV_H1C_END (1ULL << 5) |
| { .mask = H1_EV_H1C_END, .name = "h1c_end", .desc = "H1 connection terminated" }, |
| #define H1_EV_H1C_ERR (1ULL << 6) |
| { .mask = H1_EV_H1C_ERR, .name = "h1c_err", .desc = "error on H1 connection" }, |
| |
| #define H1_EV_RX_DATA (1ULL << 7) |
| { .mask = H1_EV_RX_DATA, .name = "rx_data", .desc = "receipt of any H1 data" }, |
| #define H1_EV_RX_EOI (1ULL << 8) |
| { .mask = H1_EV_RX_EOI, .name = "rx_eoi", .desc = "receipt of end of H1 input" }, |
| #define H1_EV_RX_HDRS (1ULL << 9) |
| { .mask = H1_EV_RX_HDRS, .name = "rx_headers", .desc = "receipt of H1 headers" }, |
| #define H1_EV_RX_BODY (1ULL << 10) |
| { .mask = H1_EV_RX_BODY, .name = "rx_body", .desc = "receipt of H1 body" }, |
| #define H1_EV_RX_TLRS (1ULL << 11) |
| { .mask = H1_EV_RX_TLRS, .name = "rx_trailerus", .desc = "receipt of H1 trailers" }, |
| |
| #define H1_EV_TX_DATA (1ULL << 12) |
| { .mask = H1_EV_TX_DATA, .name = "tx_data", .desc = "transmission of any H1 data" }, |
| #define H1_EV_TX_EOI (1ULL << 13) |
| { .mask = H1_EV_TX_EOI, .name = "tx_eoi", .desc = "transmission of end of H1 input" }, |
| #define H1_EV_TX_HDRS (1ULL << 14) |
| { .mask = H1_EV_TX_HDRS, .name = "tx_headers", .desc = "transmission of all headers" }, |
| #define H1_EV_TX_BODY (1ULL << 15) |
| { .mask = H1_EV_TX_BODY, .name = "tx_body", .desc = "transmission of H1 body" }, |
| #define H1_EV_TX_TLRS (1ULL << 16) |
| { .mask = H1_EV_TX_TLRS, .name = "tx_trailerus", .desc = "transmission of H1 trailers" }, |
| |
| #define H1_EV_H1S_NEW (1ULL << 17) |
| { .mask = H1_EV_H1S_NEW, .name = "h1s_new", .desc = "new H1 stream" }, |
| #define H1_EV_H1S_BLK (1ULL << 18) |
| { .mask = H1_EV_H1S_BLK, .name = "h1s_blk", .desc = "H1 stream blocked" }, |
| #define H1_EV_H1S_END (1ULL << 19) |
| { .mask = H1_EV_H1S_END, .name = "h1s_end", .desc = "H1 stream terminated" }, |
| #define H1_EV_H1S_ERR (1ULL << 20) |
| { .mask = H1_EV_H1S_ERR, .name = "h1s_err", .desc = "error on H1 stream" }, |
| |
| #define H1_EV_STRM_NEW (1ULL << 21) |
| { .mask = H1_EV_STRM_NEW, .name = "strm_new", .desc = "app-layer stream creation" }, |
| #define H1_EV_STRM_RECV (1ULL << 22) |
| { .mask = H1_EV_STRM_RECV, .name = "strm_recv", .desc = "receiving data for stream" }, |
| #define H1_EV_STRM_SEND (1ULL << 23) |
| { .mask = H1_EV_STRM_SEND, .name = "strm_send", .desc = "sending data for stream" }, |
| #define H1_EV_STRM_WAKE (1ULL << 24) |
| { .mask = H1_EV_STRM_WAKE, .name = "strm_wake", .desc = "stream woken up" }, |
| #define H1_EV_STRM_SHUT (1ULL << 25) |
| { .mask = H1_EV_STRM_SHUT, .name = "strm_shut", .desc = "stream shutdown" }, |
| #define H1_EV_STRM_END (1ULL << 26) |
| { .mask = H1_EV_STRM_END, .name = "strm_end", .desc = "detaching app-layer stream" }, |
| #define H1_EV_STRM_ERR (1ULL << 27) |
| { .mask = H1_EV_STRM_ERR, .name = "strm_err", .desc = "stream error" }, |
| |
| { } |
| }; |
| |
| static const struct name_desc h1_trace_lockon_args[4] = { |
| /* arg1 */ { /* already used by the connection */ }, |
| /* arg2 */ { .name="h1s", .desc="H1 stream" }, |
| /* arg3 */ { }, |
| /* arg4 */ { } |
| }; |
| |
| static const struct name_desc h1_trace_decoding[] = { |
| #define H1_VERB_CLEAN 1 |
| { .name="clean", .desc="only user-friendly stuff, generally suitable for level \"user\"" }, |
| #define H1_VERB_MINIMAL 2 |
| { .name="minimal", .desc="report only h1c/h1s state and flags, no real decoding" }, |
| #define H1_VERB_SIMPLE 3 |
| { .name="simple", .desc="add request/response status line or htx info when available" }, |
| #define H1_VERB_ADVANCED 4 |
| { .name="advanced", .desc="add header fields or frame decoding when available" }, |
| #define H1_VERB_COMPLETE 5 |
| { .name="complete", .desc="add full data dump when available" }, |
| { /* end */ } |
| }; |
| |
| static struct trace_source trace_h1 = { |
| .name = IST("h1"), |
| .desc = "HTTP/1 multiplexer", |
| .arg_def = TRC_ARG1_CONN, // TRACE()'s first argument is always a connection |
| .default_cb = h1_trace, |
| .known_events = h1_trace_events, |
| .lockon_args = h1_trace_lockon_args, |
| .decoding = h1_trace_decoding, |
| .report_events = ~0, // report everything by default |
| }; |
| |
| #define TRACE_SOURCE &trace_h1 |
| INITCALL1(STG_REGISTER, trace_register_source, TRACE_SOURCE); |
| |
| /* the h1c and h1s pools */ |
| DECLARE_STATIC_POOL(pool_head_h1c, "h1c", sizeof(struct h1c)); |
| DECLARE_STATIC_POOL(pool_head_h1s, "h1s", sizeof(struct h1s)); |
| |
| static int h1_recv(struct h1c *h1c); |
| static int h1_send(struct h1c *h1c); |
| static int h1_process(struct h1c *h1c); |
| static struct task *h1_io_cb(struct task *t, void *ctx, unsigned short state); |
| static void h1_shutw_conn(struct connection *conn, enum cs_shw_mode mode); |
| static struct task *h1_timeout_task(struct task *t, void *context, unsigned short state); |
| static void h1_wake_stream_for_recv(struct h1s *h1s); |
| static void h1_wake_stream_for_send(struct h1s *h1s); |
| |
| /* the H1 traces always expect that arg1, if non-null, is of type connection |
| * (from which we can derive h1c), that arg2, if non-null, is of type h1s, and |
| * that arg3, if non-null, is a htx for rx/tx headers. |
| */ |
| static void h1_trace(enum trace_level level, uint64_t mask, const struct trace_source *src, |
| const struct ist where, const struct ist func, |
| const void *a1, const void *a2, const void *a3, const void *a4) |
| { |
| const struct connection *conn = a1; |
| const struct h1c *h1c = conn ? conn->ctx : NULL; |
| const struct h1s *h1s = a2; |
| const struct htx *htx = a3; |
| const size_t *val = a4; |
| |
| if (!h1c) |
| h1c = (h1s ? h1s->h1c : NULL); |
| |
| if (!h1c || src->verbosity < H1_VERB_CLEAN) |
| return; |
| |
| /* Display frontend/backend info by default */ |
| chunk_appendf(&trace_buf, " : [%c]", (conn_is_back(h1c->conn) ? 'B' : 'F')); |
| |
| /* Display request and response states if h1s is defined */ |
| if (h1s) |
| chunk_appendf(&trace_buf, " [%s, %s]", |
| h1m_state_str(h1s->req.state), h1m_state_str(h1s->res.state)); |
| |
| if (src->verbosity == H1_VERB_CLEAN) |
| return; |
| |
| /* Display the value to the 4th argument (level > STATE) */ |
| if (src->level > TRACE_LEVEL_STATE && val) |
| chunk_appendf(&trace_buf, " - VAL=%lu", (long)*val); |
| |
| /* Display status-line if possible (verbosity > MINIMAL) */ |
| if (src->verbosity > H1_VERB_MINIMAL && htx && htx_nbblks(htx)) { |
| const struct htx_blk *blk = htx_get_head_blk(htx); |
| const struct htx_sl *sl = htx_get_blk_ptr(htx, blk); |
| enum htx_blk_type type = htx_get_blk_type(blk); |
| |
| if (type == HTX_BLK_REQ_SL || type == HTX_BLK_RES_SL) |
| chunk_appendf(&trace_buf, " - \"%.*s %.*s %.*s\"", |
| HTX_SL_P1_LEN(sl), HTX_SL_P1_PTR(sl), |
| HTX_SL_P2_LEN(sl), HTX_SL_P2_PTR(sl), |
| HTX_SL_P3_LEN(sl), HTX_SL_P3_PTR(sl)); |
| } |
| |
| /* Display h1c info and, if defined, h1s info (pointer + flags) */ |
| chunk_appendf(&trace_buf, " - h1c=%p(0x%08x)", h1c, h1c->flags); |
| if (h1s) |
| chunk_appendf(&trace_buf, " h1s=%p(0x%08x)", h1s, h1s->flags); |
| |
| if (src->verbosity == H1_VERB_MINIMAL) |
| return; |
| |
| /* Display input and output buffer info (level > USER & verbosity > SIMPLE) */ |
| if (src->level > TRACE_LEVEL_USER) { |
| if (src->verbosity == H1_VERB_COMPLETE || |
| (src->verbosity == H1_VERB_ADVANCED && (mask & (H1_EV_H1C_RECV|H1_EV_STRM_RECV)))) |
| chunk_appendf(&trace_buf, " ibuf=%u@%p+%u/%u", |
| (unsigned int)b_data(&h1c->ibuf), b_orig(&h1c->ibuf), |
| (unsigned int)b_head_ofs(&h1c->ibuf), (unsigned int)b_size(&h1c->ibuf)); |
| if (src->verbosity == H1_VERB_COMPLETE || |
| (src->verbosity == H1_VERB_ADVANCED && (mask & (H1_EV_H1C_SEND|H1_EV_STRM_SEND)))) |
| chunk_appendf(&trace_buf, " obuf=%u@%p+%u/%u", |
| (unsigned int)b_data(&h1c->obuf), b_orig(&h1c->obuf), |
| (unsigned int)b_head_ofs(&h1c->obuf), (unsigned int)b_size(&h1c->obuf)); |
| } |
| |
| /* Display htx info if defined (level > USER) */ |
| if (src->level > TRACE_LEVEL_USER && htx) { |
| int full = 0; |
| |
| /* Full htx info (level > STATE && verbosity > SIMPLE) */ |
| if (src->level > TRACE_LEVEL_STATE) { |
| if (src->verbosity == H1_VERB_COMPLETE) |
| full = 1; |
| else if (src->verbosity == H1_VERB_ADVANCED && (mask & (H1_EV_RX_HDRS|H1_EV_TX_HDRS))) |
| full = 1; |
| } |
| |
| chunk_memcat(&trace_buf, "\n\t", 2); |
| htx_dump(&trace_buf, htx, full); |
| } |
| } |
| |
| |
| /*****************************************************/ |
| /* functions below are for dynamic buffer management */ |
| /*****************************************************/ |
| /* |
| * Indicates whether or not we may receive data. The rules are the following : |
| * - if an error or a shutdown for reads was detected on the connection we |
| must not attempt to receive |
| * - if the input buffer failed to be allocated or is full , we must not try |
| * to receive |
| * - if he input processing is busy waiting for the output side, we may |
| * attempt to receive |
| * - otherwise must may not attempt to receive |
| */ |
| static inline int h1_recv_allowed(const struct h1c *h1c) |
| { |
| if (h1c->flags & H1C_F_CS_ERROR) { |
| TRACE_DEVEL("recv not allowed because of error on h1c", H1_EV_H1C_RECV|H1_EV_H1C_BLK, h1c->conn); |
| return 0; |
| } |
| |
| if (h1c->conn->flags & (CO_FL_ERROR|CO_FL_SOCK_RD_SH)) { |
| TRACE_DEVEL("recv not allowed because of (error|read0) on connection", H1_EV_H1C_RECV|H1_EV_H1C_BLK, h1c->conn); |
| return 0; |
| } |
| |
| if (!(h1c->flags & (H1C_F_IN_ALLOC|H1C_F_IN_FULL|H1C_F_IN_BUSY))) |
| return 1; |
| |
| TRACE_DEVEL("recv not allowed because input is blocked", H1_EV_H1C_RECV|H1_EV_H1C_BLK, h1c->conn); |
| return 0; |
| } |
| |
| /* |
| * Tries to grab a buffer and to re-enables processing on mux <target>. The h1 |
| * flags are used to figure what buffer was requested. It returns 1 if the |
| * allocation succeeds, in which case the connection is woken up, or 0 if it's |
| * impossible to wake up and we prefer to be woken up later. |
| */ |
| static int h1_buf_available(void *target) |
| { |
| struct h1c *h1c = target; |
| |
| if ((h1c->flags & H1C_F_IN_ALLOC) && b_alloc_margin(&h1c->ibuf, 0)) { |
| TRACE_STATE("unblocking h1c, ibuf allocated", H1_EV_H1C_RECV|H1_EV_H1C_BLK|H1_EV_H1C_WAKE, h1c->conn); |
| h1c->flags &= ~H1C_F_IN_ALLOC; |
| if (h1_recv_allowed(h1c)) |
| tasklet_wakeup(h1c->wait_event.tasklet); |
| return 1; |
| } |
| |
| if ((h1c->flags & H1C_F_OUT_ALLOC) && b_alloc_margin(&h1c->obuf, 0)) { |
| TRACE_STATE("unblocking h1s, obuf allocated", H1_EV_TX_DATA|H1_EV_H1S_BLK|H1_EV_STRM_WAKE, h1c->conn, h1c->h1s); |
| h1c->flags &= ~H1C_F_OUT_ALLOC; |
| tasklet_wakeup(h1c->wait_event.tasklet); |
| if (h1c->h1s) |
| h1_wake_stream_for_send(h1c->h1s); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Allocate a buffer. If if fails, it adds the mux in buffer wait queue. |
| */ |
| static inline struct buffer *h1_get_buf(struct h1c *h1c, struct buffer *bptr) |
| { |
| struct buffer *buf = NULL; |
| |
| if (likely(!MT_LIST_ADDED(&h1c->buf_wait.list)) && |
| unlikely((buf = b_alloc_margin(bptr, 0)) == NULL)) { |
| h1c->buf_wait.target = h1c; |
| h1c->buf_wait.wakeup_cb = h1_buf_available; |
| MT_LIST_ADDQ(&buffer_wq, &h1c->buf_wait.list); |
| } |
| return buf; |
| } |
| |
| /* |
| * Release a buffer, if any, and try to wake up entities waiting in the buffer |
| * wait queue. |
| */ |
| static inline void h1_release_buf(struct h1c *h1c, struct buffer *bptr) |
| { |
| if (bptr->size) { |
| b_free(bptr); |
| offer_buffers(h1c->buf_wait.target, tasks_run_queue); |
| } |
| } |
| |
| /* returns the number of streams in use on a connection to figure if it's idle |
| * or not. We rely on H1C_F_CS_IDLE to know if the connection is in-use or |
| * not. This flag is only set when no H1S is attached and when the previous |
| * stream, if any, was fully terminated without any error and in K/A mode. |
| */ |
| static int h1_used_streams(struct connection *conn) |
| { |
| struct h1c *h1c = conn->ctx; |
| |
| return ((h1c->flags & H1C_F_CS_IDLE) ? 0 : 1); |
| } |
| |
| /* returns the number of streams still available on a connection */ |
| static int h1_avail_streams(struct connection *conn) |
| { |
| return 1 - h1_used_streams(conn); |
| } |
| |
| |
| /*****************************************************************/ |
| /* functions below are dedicated to the mux setup and management */ |
| /*****************************************************************/ |
| |
| /* returns non-zero if there are input data pending for stream h1s. */ |
| static inline size_t h1s_data_pending(const struct h1s *h1s) |
| { |
| const struct h1m *h1m; |
| |
| h1m = conn_is_back(h1s->h1c->conn) ? &h1s->res : &h1s->req; |
| if (h1m->state == H1_MSG_DONE) |
| return !(h1s->flags & H1S_F_PARSING_DONE); |
| |
| return b_data(&h1s->h1c->ibuf); |
| } |
| |
| static struct conn_stream *h1s_new_cs(struct h1s *h1s) |
| { |
| struct conn_stream *cs; |
| |
| TRACE_ENTER(H1_EV_STRM_NEW, h1s->h1c->conn, h1s); |
| cs = cs_new(h1s->h1c->conn); |
| if (!cs) { |
| TRACE_DEVEL("leaving on CS allocation failure", H1_EV_STRM_NEW|H1_EV_STRM_END|H1_EV_STRM_ERR, h1s->h1c->conn, h1s); |
| goto err; |
| } |
| h1s->cs = cs; |
| cs->ctx = h1s; |
| |
| if (h1s->flags & H1S_F_NOT_FIRST) |
| cs->flags |= CS_FL_NOT_FIRST; |
| |
| if (global.tune.options & GTUNE_USE_SPLICE) |
| cs->flags |= CS_FL_MAY_SPLICE; |
| |
| if (stream_create_from_cs(cs) < 0) { |
| TRACE_DEVEL("leaving on stream creation failure", H1_EV_STRM_NEW|H1_EV_STRM_END|H1_EV_STRM_ERR, h1s->h1c->conn, h1s); |
| goto err; |
| } |
| |
| TRACE_LEAVE(H1_EV_STRM_NEW, h1s->h1c->conn, h1s); |
| return cs; |
| |
| err: |
| cs_free(cs); |
| h1s->cs = NULL; |
| return NULL; |
| } |
| |
| static struct h1s *h1s_create(struct h1c *h1c, struct conn_stream *cs, struct session *sess) |
| { |
| struct h1s *h1s; |
| |
| TRACE_ENTER(H1_EV_H1S_NEW, h1c->conn); |
| |
| h1s = pool_alloc(pool_head_h1s); |
| if (!h1s) |
| goto fail; |
| |
| h1s->h1c = h1c; |
| h1c->h1s = h1s; |
| |
| h1s->sess = sess; |
| |
| h1s->cs = NULL; |
| h1s->flags = H1S_F_WANT_KAL; |
| |
| h1s->subs = NULL; |
| |
| h1m_init_req(&h1s->req); |
| h1s->req.flags |= (H1_MF_NO_PHDR|H1_MF_CLEAN_CONN_HDR); |
| |
| h1m_init_res(&h1s->res); |
| h1s->res.flags |= (H1_MF_NO_PHDR|H1_MF_CLEAN_CONN_HDR); |
| |
| h1s->status = 0; |
| h1s->meth = HTTP_METH_OTHER; |
| |
| if (h1c->flags & H1C_F_WAIT_NEXT_REQ) |
| h1s->flags |= H1S_F_NOT_FIRST; |
| h1c->flags &= ~(H1C_F_CS_IDLE|H1C_F_WAIT_NEXT_REQ); |
| |
| if (!conn_is_back(h1c->conn)) { |
| if (h1c->px->options2 & PR_O2_REQBUG_OK) |
| h1s->req.err_pos = -1; |
| |
| /* For frontend connections we should always have a session */ |
| if (!sess) |
| sess = h1c->conn->owner; |
| |
| /* Timers for subsequent sessions on the same HTTP 1.x connection |
| * measure from `now`, not from the connection accept time */ |
| if (h1s->flags & H1S_F_NOT_FIRST) { |
| h1s->csinfo.create_date = date; |
| h1s->csinfo.tv_create = now; |
| h1s->csinfo.t_handshake = 0; |
| h1s->csinfo.t_idle = -1; |
| } |
| else { |
| h1s->csinfo.create_date = sess->accept_date; |
| h1s->csinfo.tv_create = sess->tv_accept; |
| h1s->csinfo.t_handshake = sess->t_handshake; |
| h1s->csinfo.t_idle = -1; |
| } |
| } |
| else { |
| if (h1c->px->options2 & PR_O2_RSPBUG_OK) |
| h1s->res.err_pos = -1; |
| |
| h1s->csinfo.create_date = date; |
| h1s->csinfo.tv_create = now; |
| h1s->csinfo.t_handshake = 0; |
| h1s->csinfo.t_idle = -1; |
| } |
| |
| /* If a conn_stream already exists, attach it to this H1S. Otherwise we |
| * create a new one. |
| */ |
| if (cs) { |
| cs->ctx = h1s; |
| h1s->cs = cs; |
| } |
| else { |
| cs = h1s_new_cs(h1s); |
| if (!cs) |
| goto fail; |
| } |
| TRACE_LEAVE(H1_EV_H1S_NEW, h1c->conn, h1s); |
| return h1s; |
| |
| fail: |
| pool_free(pool_head_h1s, h1s); |
| TRACE_DEVEL("leaving in error", H1_EV_H1S_NEW|H1_EV_H1S_END|H1_EV_H1S_ERR, h1c->conn); |
| return NULL; |
| } |
| |
| static void h1s_destroy(struct h1s *h1s) |
| { |
| if (h1s) { |
| struct h1c *h1c = h1s->h1c; |
| |
| TRACE_POINT(H1_EV_H1S_END, h1c->conn, h1s); |
| h1c->h1s = NULL; |
| |
| if (h1s->subs) |
| h1s->subs->events = 0; |
| |
| h1c->flags &= ~H1C_F_IN_BUSY; |
| if (h1s->flags & (H1S_F_REQ_ERROR|H1S_F_RES_ERROR)) { |
| h1c->flags |= H1C_F_CS_ERROR; |
| TRACE_STATE("h1s on error, set error on h1c", H1_EV_H1C_ERR, h1c->conn, h1s); |
| } |
| |
| if (!(h1c->flags & (H1C_F_CS_ERROR|H1C_F_CS_SHUTW_NOW|H1C_F_CS_SHUTDOWN)) && /* No error/shutdown on h1c */ |
| !(h1c->conn->flags & (CO_FL_ERROR|CO_FL_SOCK_RD_SH|CO_FL_SOCK_WR_SH)) && /* No error/shutdown on conn */ |
| (h1s->flags & (H1S_F_WANT_KAL|H1S_F_PARSING_DONE)) == (H1S_F_WANT_KAL|H1S_F_PARSING_DONE) && /* K/A possible */ |
| h1s->req.state == H1_MSG_DONE && h1s->res.state == H1_MSG_DONE) { /* req/res in DONE state */ |
| h1c->flags |= (H1C_F_CS_IDLE|H1C_F_WAIT_NEXT_REQ); |
| TRACE_STATE("set idle mode on h1c, waiting for the next request", H1_EV_H1C_ERR, h1c->conn, h1s); |
| } |
| pool_free(pool_head_h1s, h1s); |
| } |
| } |
| |
| static const struct cs_info *h1_get_cs_info(struct conn_stream *cs) |
| { |
| struct h1s *h1s = cs->ctx; |
| |
| if (h1s && !conn_is_back(cs->conn)) |
| return &h1s->csinfo; |
| return NULL; |
| } |
| |
| /* |
| * Initialize the mux once it's attached. It is expected that conn->ctx points |
| * to the existing conn_stream (for outgoing connections or for incoming onces |
| * during a mux upgrade) or NULL (for incoming ones during the connexion |
| * establishment). <input> is always used as Input buffer and may contain |
| * data. It is the caller responsibility to not reuse it anymore. Returns < 0 on |
| * error. |
| */ |
| static int h1_init(struct connection *conn, struct proxy *proxy, struct session *sess, |
| struct buffer *input) |
| { |
| struct h1c *h1c; |
| struct task *t = NULL; |
| void *conn_ctx = conn->ctx; |
| |
| TRACE_ENTER(H1_EV_H1C_NEW); |
| |
| h1c = pool_alloc(pool_head_h1c); |
| if (!h1c) |
| goto fail_h1c; |
| h1c->conn = conn; |
| h1c->px = proxy; |
| |
| h1c->flags = H1C_F_CS_IDLE; |
| h1c->ibuf = *input; |
| h1c->obuf = BUF_NULL; |
| h1c->h1s = NULL; |
| h1c->task = NULL; |
| |
| MT_LIST_INIT(&h1c->buf_wait.list); |
| h1c->wait_event.tasklet = tasklet_new(); |
| if (!h1c->wait_event.tasklet) |
| goto fail; |
| h1c->wait_event.tasklet->process = h1_io_cb; |
| h1c->wait_event.tasklet->context = h1c; |
| h1c->wait_event.events = 0; |
| |
| if (conn_is_back(conn)) { |
| h1c->shut_timeout = h1c->timeout = proxy->timeout.server; |
| if (tick_isset(proxy->timeout.serverfin)) |
| h1c->shut_timeout = proxy->timeout.serverfin; |
| } else { |
| h1c->shut_timeout = h1c->timeout = proxy->timeout.client; |
| if (tick_isset(proxy->timeout.clientfin)) |
| h1c->shut_timeout = proxy->timeout.clientfin; |
| } |
| if (tick_isset(h1c->timeout)) { |
| t = task_new(tid_bit); |
| if (!t) |
| goto fail; |
| |
| h1c->task = t; |
| t->process = h1_timeout_task; |
| t->context = h1c; |
| t->expire = tick_add(now_ms, h1c->timeout); |
| } |
| |
| conn->ctx = h1c; |
| |
| /* Always Create a new H1S */ |
| if (!h1s_create(h1c, conn_ctx, sess)) |
| goto fail; |
| |
| if (t) |
| task_queue(t); |
| |
| /* Try to read, if nothing is available yet we'll just subscribe */ |
| h1c->conn->xprt->subscribe(h1c->conn, h1c->conn->xprt_ctx, SUB_RETRY_RECV, &h1c->wait_event); |
| |
| /* mux->wake will be called soon to complete the operation */ |
| TRACE_LEAVE(H1_EV_H1C_NEW, conn, h1c->h1s); |
| return 0; |
| |
| fail: |
| task_destroy(t); |
| if (h1c->wait_event.tasklet) |
| tasklet_free(h1c->wait_event.tasklet); |
| pool_free(pool_head_h1c, h1c); |
| fail_h1c: |
| conn->ctx = conn_ctx; // restore saved context |
| TRACE_DEVEL("leaving in error", H1_EV_H1C_NEW|H1_EV_H1C_END|H1_EV_H1C_ERR); |
| return -1; |
| } |
| |
| /* release function. This one should be called to free all resources allocated |
| * to the mux. |
| */ |
| static void h1_release(struct h1c *h1c) |
| { |
| struct connection *conn = NULL; |
| |
| TRACE_POINT(H1_EV_H1C_END); |
| |
| if (h1c) { |
| /* The connection must be aattached to this mux to be released */ |
| if (h1c->conn && h1c->conn->ctx == h1c) |
| conn = h1c->conn; |
| |
| TRACE_DEVEL("freeing h1c", H1_EV_H1C_END, conn); |
| |
| if (conn && h1c->flags & H1C_F_UPG_H2C) { |
| TRACE_DEVEL("upgrading H1 to H2", H1_EV_H1C_END, conn); |
| h1c->flags &= ~H1C_F_UPG_H2C; |
| /* Make sure we're no longer subscribed to anything */ |
| if (h1c->wait_event.events) |
| conn->xprt->unsubscribe(conn, conn->xprt_ctx, |
| h1c->wait_event.events, &h1c->wait_event); |
| if (conn_upgrade_mux_fe(conn, NULL, &h1c->ibuf, ist("h2"), PROTO_MODE_HTTP) != -1) { |
| /* connection successfully upgraded to H2, this |
| * mux was already released */ |
| return; |
| } |
| TRACE_DEVEL("h2 upgrade failed", H1_EV_H1C_END|H1_EV_H1C_ERR, conn); |
| sess_log(conn->owner); /* Log if the upgrade failed */ |
| } |
| |
| |
| if (MT_LIST_ADDED(&h1c->buf_wait.list)) |
| MT_LIST_DEL(&h1c->buf_wait.list); |
| |
| h1_release_buf(h1c, &h1c->ibuf); |
| h1_release_buf(h1c, &h1c->obuf); |
| |
| if (h1c->task) { |
| h1c->task->context = NULL; |
| task_wakeup(h1c->task, TASK_WOKEN_OTHER); |
| h1c->task = NULL; |
| } |
| |
| if (h1c->wait_event.tasklet) |
| tasklet_free(h1c->wait_event.tasklet); |
| |
| h1s_destroy(h1c->h1s); |
| if (conn && h1c->wait_event.events != 0) |
| conn->xprt->unsubscribe(conn, conn->xprt_ctx, h1c->wait_event.events, |
| &h1c->wait_event); |
| pool_free(pool_head_h1c, h1c); |
| } |
| |
| if (conn) { |
| conn->mux = NULL; |
| conn->ctx = NULL; |
| TRACE_DEVEL("freeing conn", H1_EV_H1C_END, conn); |
| |
| conn_stop_tracking(conn); |
| conn_full_close(conn); |
| if (conn->destroy_cb) |
| conn->destroy_cb(conn); |
| conn_free(conn); |
| } |
| } |
| |
| /******************************************************/ |
| /* functions below are for the H1 protocol processing */ |
| /******************************************************/ |
| /* Parse the request version and set H1_MF_VER_11 on <h1m> if the version is |
| * greater or equal to 1.1 |
| */ |
| static void h1_parse_req_vsn(struct h1m *h1m, const struct htx_sl *sl) |
| { |
| const char *p = HTX_SL_REQ_VPTR(sl); |
| |
| if ((HTX_SL_REQ_VLEN(sl) == 8) && |
| (*(p + 5) > '1' || |
| (*(p + 5) == '1' && *(p + 7) >= '1'))) |
| h1m->flags |= H1_MF_VER_11; |
| } |
| |
| /* Parse the response version and set H1_MF_VER_11 on <h1m> if the version is |
| * greater or equal to 1.1 |
| */ |
| static void h1_parse_res_vsn(struct h1m *h1m, const struct htx_sl *sl) |
| { |
| const char *p = HTX_SL_RES_VPTR(sl); |
| |
| if ((HTX_SL_RES_VLEN(sl) == 8) && |
| (*(p + 5) > '1' || |
| (*(p + 5) == '1' && *(p + 7) >= '1'))) |
| h1m->flags |= H1_MF_VER_11; |
| } |
| |
| /* Deduce the connection mode of the client connection, depending on the |
| * configuration and the H1 message flags. This function is called twice, the |
| * first time when the request is parsed and the second time when the response |
| * is parsed. |
| */ |
| static void h1_set_cli_conn_mode(struct h1s *h1s, struct h1m *h1m) |
| { |
| struct proxy *fe = h1s->h1c->px; |
| |
| if (h1m->flags & H1_MF_RESP) { |
| /* Output direction: second pass */ |
| if ((h1s->meth == HTTP_METH_CONNECT && h1s->status == 200) || |
| h1s->status == 101) { |
| /* Either we've established an explicit tunnel, or we're |
| * switching the protocol. In both cases, we're very unlikely to |
| * understand the next protocols. We have to switch to tunnel |
| * mode, so that we transfer the request and responses then let |
| * this protocol pass unmodified. When we later implement |
| * specific parsers for such protocols, we'll want to check the |
| * Upgrade header which contains information about that protocol |
| * for responses with status 101 (eg: see RFC2817 about TLS). |
| */ |
| h1s->flags = (h1s->flags & ~H1S_F_WANT_MSK) | H1S_F_WANT_TUN; |
| TRACE_STATE("set tunnel mode (resp)", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1s->h1c->conn, h1s); |
| } |
| else if (h1s->flags & H1S_F_WANT_KAL) { |
| /* By default the client is in KAL mode. CLOSE mode mean |
| * it is imposed by the client itself. So only change |
| * KAL mode here. */ |
| if (!(h1m->flags & H1_MF_XFER_LEN) || (h1m->flags & H1_MF_CONN_CLO)) { |
| /* no length known or explicit close => close */ |
| h1s->flags = (h1s->flags & ~H1S_F_WANT_MSK) | H1S_F_WANT_CLO; |
| TRACE_STATE("detect close mode (resp)", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1s->h1c->conn, h1s); |
| } |
| else if (!(h1m->flags & H1_MF_CONN_KAL) && |
| (fe->options & PR_O_HTTP_MODE) == PR_O_HTTP_CLO) { |
| /* no explicit keep-alive and option httpclose => close */ |
| h1s->flags = (h1s->flags & ~H1S_F_WANT_MSK) | H1S_F_WANT_CLO; |
| TRACE_STATE("force close mode (resp)", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1s->h1c->conn, h1s); |
| } |
| } |
| } |
| else { |
| /* Input direction: first pass */ |
| if (!(h1m->flags & (H1_MF_VER_11|H1_MF_CONN_KAL)) || h1m->flags & H1_MF_CONN_CLO) { |
| /* no explicit keep-alive in HTTP/1.0 or explicit close => close*/ |
| h1s->flags = (h1s->flags & ~H1S_F_WANT_MSK) | H1S_F_WANT_CLO; |
| TRACE_STATE("detect close mode (req)", H1_EV_RX_DATA|H1_EV_RX_HDRS, h1s->h1c->conn, h1s); |
| } |
| } |
| |
| /* If KAL, check if the frontend is stopping. If yes, switch in CLO mode */ |
| if (h1s->flags & H1S_F_WANT_KAL && fe->state == PR_STSTOPPED) { |
| h1s->flags = (h1s->flags & ~H1S_F_WANT_MSK) | H1S_F_WANT_CLO; |
| TRACE_STATE("stopping, set close mode", H1_EV_RX_DATA|H1_EV_RX_HDRS|H1_EV_TX_DATA|H1_EV_TX_HDRS, h1s->h1c->conn, h1s); |
| } |
| } |
| |
| /* Deduce the connection mode of the client connection, depending on the |
| * configuration and the H1 message flags. This function is called twice, the |
| * first time when the request is parsed and the second time when the response |
| * is parsed. |
| */ |
| static void h1_set_srv_conn_mode(struct h1s *h1s, struct h1m *h1m) |
| { |
| struct session *sess = h1s->sess; |
| struct proxy *be = h1s->h1c->px; |
| int fe_flags = sess ? sess->fe->options : 0; |
| |
| if (h1m->flags & H1_MF_RESP) { |
| /* Input direction: second pass */ |
| if ((h1s->meth == HTTP_METH_CONNECT && h1s->status == 200) || |
| h1s->status == 101) { |
| /* Either we've established an explicit tunnel, or we're |
| * switching the protocol. In both cases, we're very unlikely to |
| * understand the next protocols. We have to switch to tunnel |
| * mode, so that we transfer the request and responses then let |
| * this protocol pass unmodified. When we later implement |
| * specific parsers for such protocols, we'll want to check the |
| * Upgrade header which contains information about that protocol |
| * for responses with status 101 (eg: see RFC2817 about TLS). |
| */ |
| h1s->flags = (h1s->flags & ~H1S_F_WANT_MSK) | H1S_F_WANT_TUN; |
| TRACE_STATE("set tunnel mode (resp)", H1_EV_RX_DATA|H1_EV_RX_HDRS, h1s->h1c->conn, h1s); |
| } |
| else if (h1s->flags & H1S_F_WANT_KAL) { |
| /* By default the server is in KAL mode. CLOSE mode mean |
| * it is imposed by haproxy itself. So only change KAL |
| * mode here. */ |
| if (!(h1m->flags & H1_MF_XFER_LEN) || h1m->flags & H1_MF_CONN_CLO || |
| !(h1m->flags & (H1_MF_VER_11|H1_MF_CONN_KAL))){ |
| /* no length known or explicit close or no explicit keep-alive in HTTP/1.0 => close */ |
| h1s->flags = (h1s->flags & ~H1S_F_WANT_MSK) | H1S_F_WANT_CLO; |
| TRACE_STATE("detect close mode (resp)", H1_EV_RX_DATA|H1_EV_RX_HDRS, h1s->h1c->conn, h1s); |
| } |
| } |
| } |
| else { |
| /* Output direction: first pass */ |
| if (h1m->flags & H1_MF_CONN_CLO) { |
| /* explicit close => close */ |
| h1s->flags = (h1s->flags & ~H1S_F_WANT_MSK) | H1S_F_WANT_CLO; |
| TRACE_STATE("detect close mode (req)", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1s->h1c->conn, h1s); |
| } |
| else if (!(h1m->flags & H1_MF_CONN_KAL) && |
| ((fe_flags & PR_O_HTTP_MODE) == PR_O_HTTP_SCL || |
| (be->options & PR_O_HTTP_MODE) == PR_O_HTTP_SCL || |
| (fe_flags & PR_O_HTTP_MODE) == PR_O_HTTP_CLO || |
| (be->options & PR_O_HTTP_MODE) == PR_O_HTTP_CLO)) { |
| /* no explicit keep-alive option httpclose/server-close => close */ |
| h1s->flags = (h1s->flags & ~H1S_F_WANT_MSK) | H1S_F_WANT_CLO; |
| TRACE_STATE("force close mode (req)", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1s->h1c->conn, h1s); |
| } |
| } |
| |
| /* If KAL, check if the backend is stopping. If yes, switch in CLO mode */ |
| if (h1s->flags & H1S_F_WANT_KAL && be->state == PR_STSTOPPED) { |
| h1s->flags = (h1s->flags & ~H1S_F_WANT_MSK) | H1S_F_WANT_CLO; |
| TRACE_STATE("stopping, set close mode", H1_EV_RX_DATA|H1_EV_RX_HDRS|H1_EV_TX_DATA|H1_EV_TX_HDRS, h1s->h1c->conn, h1s); |
| } |
| } |
| |
| static void h1_update_req_conn_value(struct h1s *h1s, struct h1m *h1m, struct ist *conn_val) |
| { |
| struct proxy *px = h1s->h1c->px; |
| |
| /* Don't update "Connection:" header in TUNNEL mode or if "Upgrage" |
| * token is found |
| */ |
| if (h1s->flags & H1S_F_WANT_TUN || h1m->flags & H1_MF_CONN_UPG) |
| return; |
| |
| if (h1s->flags & H1S_F_WANT_KAL || px->options2 & PR_O2_FAKE_KA) { |
| if (!(h1m->flags & H1_MF_VER_11)) { |
| TRACE_STATE("add \"Connection: keep-alive\"", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1s->h1c->conn, h1s); |
| *conn_val = ist("keep-alive"); |
| } |
| } |
| else { /* H1S_F_WANT_CLO && !PR_O2_FAKE_KA */ |
| if (h1m->flags & H1_MF_VER_11) { |
| TRACE_STATE("add \"Connection: close\"", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1s->h1c->conn, h1s); |
| *conn_val = ist("close"); |
| } |
| } |
| } |
| |
| static void h1_update_res_conn_value(struct h1s *h1s, struct h1m *h1m, struct ist *conn_val) |
| { |
| /* Don't update "Connection:" header in TUNNEL mode or if "Upgrage" |
| * token is found |
| */ |
| if (h1s->flags & H1S_F_WANT_TUN || h1m->flags & H1_MF_CONN_UPG) |
| return; |
| |
| if (h1s->flags & H1S_F_WANT_KAL) { |
| if (!(h1m->flags & H1_MF_VER_11) || |
| !((h1m->flags & h1s->req.flags) & H1_MF_VER_11)) { |
| TRACE_STATE("add \"Connection: keep-alive\"", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1s->h1c->conn, h1s); |
| *conn_val = ist("keep-alive"); |
| } |
| } |
| else { /* H1S_F_WANT_CLO */ |
| if (h1m->flags & H1_MF_VER_11) { |
| TRACE_STATE("add \"Connection: close\"", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1s->h1c->conn, h1s); |
| *conn_val = ist("close"); |
| } |
| } |
| } |
| |
| static void h1_process_input_conn_mode(struct h1s *h1s, struct h1m *h1m, struct htx *htx) |
| { |
| if (!conn_is_back(h1s->h1c->conn)) |
| h1_set_cli_conn_mode(h1s, h1m); |
| else |
| h1_set_srv_conn_mode(h1s, h1m); |
| } |
| |
| static void h1_process_output_conn_mode(struct h1s *h1s, struct h1m *h1m, struct ist *conn_val) |
| { |
| if (!conn_is_back(h1s->h1c->conn)) |
| h1_set_cli_conn_mode(h1s, h1m); |
| else |
| h1_set_srv_conn_mode(h1s, h1m); |
| |
| if (!(h1m->flags & H1_MF_RESP)) |
| h1_update_req_conn_value(h1s, h1m, conn_val); |
| else |
| h1_update_res_conn_value(h1s, h1m, conn_val); |
| } |
| |
| /* Try to adjust the case of the message header name using the global map |
| * <hdrs_map>. |
| */ |
| static void h1_adjust_case_outgoing_hdr(struct h1s *h1s, struct h1m *h1m, struct ist *name) |
| { |
| struct ebpt_node *node; |
| struct h1_hdr_entry *entry; |
| |
| /* No entry in the map, do nothing */ |
| if (eb_is_empty(&hdrs_map.map)) |
| return; |
| |
| /* No conversion fo the request headers */ |
| if (!(h1m->flags & H1_MF_RESP) && !(h1s->h1c->px->options2 & PR_O2_H1_ADJ_BUGSRV)) |
| return; |
| |
| /* No conversion fo the response headers */ |
| if ((h1m->flags & H1_MF_RESP) && !(h1s->h1c->px->options2 & PR_O2_H1_ADJ_BUGCLI)) |
| return; |
| |
| node = ebis_lookup_len(&hdrs_map.map, name->ptr, name->len); |
| if (!node) |
| return; |
| entry = container_of(node, struct h1_hdr_entry, node); |
| name->ptr = entry->name.ptr; |
| name->len = entry->name.len; |
| } |
| |
| /* Append the description of what is present in error snapshot <es> into <out>. |
| * The description must be small enough to always fit in a buffer. The output |
| * buffer may be the trash so the trash must not be used inside this function. |
| */ |
| static void h1_show_error_snapshot(struct buffer *out, const struct error_snapshot *es) |
| { |
| chunk_appendf(out, |
| " H1 connection flags 0x%08x, H1 stream flags 0x%08x\n" |
| " H1 msg state %s(%d), H1 msg flags 0x%08x\n" |
| " H1 chunk len %lld bytes, H1 body len %lld bytes :\n", |
| es->ctx.h1.c_flags, es->ctx.h1.s_flags, |
| h1m_state_str(es->ctx.h1.state), es->ctx.h1.state, |
| es->ctx.h1.m_flags, es->ctx.h1.m_clen, es->ctx.h1.m_blen); |
| } |
| /* |
| * Capture a bad request or response and archive it in the proxy's structure. |
| * By default it tries to report the error position as h1m->err_pos. However if |
| * this one is not set, it will then report h1m->next, which is the last known |
| * parsing point. The function is able to deal with wrapping buffers. It always |
| * displays buffers as a contiguous area starting at buf->p. The direction is |
| * determined thanks to the h1m's flags. |
| */ |
| static void h1_capture_bad_message(struct h1c *h1c, struct h1s *h1s, |
| struct h1m *h1m, struct buffer *buf) |
| { |
| struct session *sess = h1c->conn->owner; |
| struct proxy *proxy = h1c->px; |
| struct proxy *other_end; |
| union error_snapshot_ctx ctx; |
| |
| if (h1s->cs && h1s->cs->data) { |
| if (sess == NULL) |
| sess = si_strm(h1s->cs->data)->sess; |
| if (!(h1m->flags & H1_MF_RESP)) |
| other_end = si_strm(h1s->cs->data)->be; |
| else |
| other_end = sess->fe; |
| } else |
| other_end = NULL; |
| |
| /* http-specific part now */ |
| ctx.h1.state = h1m->state; |
| ctx.h1.c_flags = h1c->flags; |
| ctx.h1.s_flags = h1s->flags; |
| ctx.h1.m_flags = h1m->flags; |
| ctx.h1.m_clen = h1m->curr_len; |
| ctx.h1.m_blen = h1m->body_len; |
| |
| proxy_capture_error(proxy, !!(h1m->flags & H1_MF_RESP), other_end, |
| h1c->conn->target, sess, buf, 0, 0, |
| (h1m->err_pos >= 0) ? h1m->err_pos : h1m->next, |
| &ctx, h1_show_error_snapshot); |
| } |
| |
| /* Emit the chunksize followed by a CRLF in front of data of the buffer |
| * <buf>. It goes backwards and starts with the byte before the buffer's |
| * head. The caller is responsible for ensuring there is enough room left before |
| * the buffer's head for the string. |
| */ |
| static void h1_emit_chunk_size(struct buffer *buf, size_t chksz) |
| { |
| char *beg, *end; |
| |
| beg = end = b_head(buf); |
| *--beg = '\n'; |
| *--beg = '\r'; |
| do { |
| *--beg = hextab[chksz & 0xF]; |
| } while (chksz >>= 4); |
| buf->head -= (end - beg); |
| b_add(buf, end - beg); |
| } |
| |
| /* Emit a CRLF after the data of the buffer <buf>. The caller is responsible for |
| * ensuring there is enough room left in the buffer for the string. */ |
| static void h1_emit_chunk_crlf(struct buffer *buf) |
| { |
| *(b_peek(buf, b_data(buf))) = '\r'; |
| *(b_peek(buf, b_data(buf) + 1)) = '\n'; |
| b_add(buf, 2); |
| } |
| |
| /* |
| * Switch the request to tunnel mode. This function must only be called for |
| * CONNECT requests. On the client side, if the response is not finished, the |
| * mux is mark as busy on input. |
| */ |
| static void h1_set_req_tunnel_mode(struct h1s *h1s) |
| { |
| h1s->req.flags &= ~(H1_MF_XFER_LEN|H1_MF_CLEN|H1_MF_CHNK); |
| h1s->req.state = H1_MSG_TUNNEL; |
| TRACE_STATE("switch H1 request in tunnel mode", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1s->h1c->conn, h1s); |
| |
| if (!conn_is_back(h1s->h1c->conn)) { |
| h1s->flags &= ~H1S_F_PARSING_DONE; |
| if (h1s->res.state < H1_MSG_DONE) { |
| h1s->h1c->flags |= H1C_F_IN_BUSY; |
| TRACE_STATE("switch h1c in busy mode", H1_EV_RX_DATA|H1_EV_H1C_BLK, h1s->h1c->conn, h1s); |
| } |
| } |
| else if (h1s->h1c->flags & H1C_F_IN_BUSY) { |
| h1s->h1c->flags &= ~H1C_F_IN_BUSY; |
| tasklet_wakeup(h1s->h1c->wait_event.tasklet); |
| TRACE_STATE("h1c no more busy", H1_EV_RX_DATA|H1_EV_H1C_BLK|H1_EV_H1C_WAKE, h1s->h1c->conn, h1s); |
| } |
| } |
| |
| /* |
| * Switch the response to tunnel mode. This function must only be called on |
| * successful replies to CONNECT requests or on protocol switching. In this |
| * last case, this function takes care to switch the request to tunnel mode if |
| * possible. On the server side, if the request is not finished, the mux is mark |
| * as busy on input. |
| */ |
| static void h1_set_res_tunnel_mode(struct h1s *h1s) |
| { |
| |
| h1s->res.flags &= ~(H1_MF_XFER_LEN|H1_MF_CLEN|H1_MF_CHNK); |
| h1s->res.state = H1_MSG_TUNNEL; |
| TRACE_STATE("switch H1 response in tunnel mode", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1s->h1c->conn, h1s); |
| |
| if (conn_is_back(h1s->h1c->conn)) { |
| h1s->flags &= ~H1S_F_PARSING_DONE; |
| /* On protocol switching, switch the request to tunnel mode if it is in |
| * DONE state. Otherwise we will wait the end of the request to switch |
| * it in tunnel mode. |
| */ |
| if (h1s->req.state < H1_MSG_DONE) { |
| h1s->h1c->flags |= H1C_F_IN_BUSY; |
| TRACE_STATE("switch h1c in busy mode", H1_EV_RX_DATA|H1_EV_H1C_BLK, h1s->h1c->conn, h1s); |
| } |
| else if (h1s->status == 101 && h1s->req.state == H1_MSG_DONE) { |
| h1s->req.flags &= ~(H1_MF_XFER_LEN|H1_MF_CLEN|H1_MF_CHNK); |
| h1s->req.state = H1_MSG_TUNNEL; |
| TRACE_STATE("switch H1 request in tunnel mode", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1s->h1c->conn, h1s); |
| } |
| } |
| else if (h1s->h1c->flags & H1C_F_IN_BUSY) { |
| h1s->h1c->flags &= ~H1C_F_IN_BUSY; |
| tasklet_wakeup(h1s->h1c->wait_event.tasklet); |
| TRACE_STATE("h1c no more busy", H1_EV_RX_DATA|H1_EV_H1C_BLK|H1_EV_H1C_WAKE, h1s->h1c->conn, h1s); |
| } |
| } |
| |
| /* |
| * Parse HTTP/1 headers. It returns the number of bytes parsed if > 0, or 0 if |
| * it couldn't proceed. Parsing errors are reported by setting H1S_F_*_ERROR |
| * flag. If relies on the function http_parse_msg_hdrs() to do the parsing. |
| */ |
| static size_t h1_process_headers(struct h1s *h1s, struct h1m *h1m, struct htx *htx, |
| struct buffer *buf, size_t *ofs, size_t max) |
| { |
| union h1_sl h1sl; |
| int ret = 0; |
| |
| TRACE_ENTER(H1_EV_RX_DATA|H1_EV_RX_HDRS, h1s->h1c->conn, h1s,, (size_t[]){max}); |
| |
| if (!(h1s->h1c->px->options2 & PR_O2_NO_H2_UPGRADE) && /* H2 upgrade supported by the proxy */ |
| !(h1s->flags & H1S_F_NOT_FIRST) && /* It is the first transaction */ |
| !(h1m->flags & H1_MF_RESP)) { /* It is a request */ |
| /* Try to match H2 preface before parsing the request headers. */ |
| ret = b_isteq(buf, 0, b_data(buf), ist(H2_CONN_PREFACE)); |
| if (ret > 0) { |
| goto h2c_upgrade; |
| } |
| } |
| else { |
| if (h1s->meth == HTTP_METH_CONNECT) |
| h1m->flags |= H1_MF_METH_CONNECT; |
| if (h1s->meth == HTTP_METH_HEAD) |
| h1m->flags |= H1_MF_METH_HEAD; |
| } |
| |
| ret = h1_parse_msg_hdrs(h1m, &h1sl, htx, buf, *ofs, max); |
| if (!ret) { |
| TRACE_DEVEL("leaving on missing data or error", H1_EV_RX_DATA|H1_EV_RX_HDRS, h1s->h1c->conn, h1s); |
| if (htx->flags & HTX_FL_PARSING_ERROR) { |
| if (!(h1m->flags & H1_MF_RESP)) { |
| h1s->flags |= H1S_F_REQ_ERROR; |
| TRACE_USER("rejected H1 request", H1_EV_RX_DATA|H1_EV_RX_HDRS|H1_EV_H1S_ERR, h1s->h1c->conn, h1s); |
| } |
| else { |
| h1s->flags |= H1S_F_RES_ERROR; |
| TRACE_USER("rejected H1 response", H1_EV_RX_DATA|H1_EV_RX_HDRS|H1_EV_H1S_ERR, h1s->h1c->conn, h1s); |
| } |
| h1s->cs->flags |= CS_FL_EOI; |
| TRACE_STATE("parsing error", H1_EV_RX_DATA|H1_EV_RX_HDRS|H1_EV_H1S_ERR, h1s->h1c->conn, h1s); |
| h1_capture_bad_message(h1s->h1c, h1s, h1m, buf); |
| } |
| goto end; |
| } |
| |
| if (h1m->err_pos >= 0) { |
| /* Maybe we found an error during the parsing while we were |
| * configured not to block on that, so we have to capture it |
| * now. |
| */ |
| TRACE_STATE("Ignored parsing error", H1_EV_RX_DATA|H1_EV_RX_HDRS, h1s->h1c->conn, h1s); |
| h1_capture_bad_message(h1s->h1c, h1s, h1m, buf); |
| } |
| |
| if (!(h1m->flags & H1_MF_RESP)) { |
| h1s->meth = h1sl.rq.meth; |
| if (h1m->state == H1_MSG_TUNNEL) |
| h1_set_req_tunnel_mode(h1s); |
| } |
| else { |
| h1s->status = h1sl.st.status; |
| if (h1m->state == H1_MSG_TUNNEL) |
| h1_set_res_tunnel_mode(h1s); |
| } |
| h1_process_input_conn_mode(h1s, h1m, htx); |
| *ofs += ret; |
| |
| end: |
| TRACE_LEAVE(H1_EV_RX_DATA|H1_EV_RX_HDRS, h1s->h1c->conn, h1s,, (size_t[]){ret}); |
| return ret; |
| |
| h2c_upgrade: |
| h1s->h1c->flags |= H1C_F_UPG_H2C; |
| h1s->cs->flags |= CS_FL_EOI; |
| htx->flags |= HTX_FL_UPGRADE; |
| TRACE_DEVEL("leaving on H2 update", H1_EV_RX_DATA|H1_EV_RX_HDRS|H1_EV_RX_EOI, h1s->h1c->conn, h1s); |
| return 0; |
| } |
| |
| /* |
| * Parse HTTP/1 body. It returns the number of bytes parsed if > 0, or 0 if it |
| * couldn't proceed. Parsing errors are reported by setting H1S_F_*_ERROR flag. |
| * If relies on the function http_parse_msg_data() to do the parsing. |
| */ |
| static size_t h1_process_data(struct h1s *h1s, struct h1m *h1m, struct htx **htx, |
| struct buffer *buf, size_t *ofs, size_t max, |
| struct buffer *htxbuf) |
| { |
| int ret; |
| |
| TRACE_ENTER(H1_EV_RX_DATA|H1_EV_RX_BODY, h1s->h1c->conn, h1s,, (size_t[]){max}); |
| ret = h1_parse_msg_data(h1m, htx, buf, *ofs, max, htxbuf); |
| if (!ret) { |
| TRACE_DEVEL("leaving on missing data or error", H1_EV_RX_DATA|H1_EV_RX_BODY, h1s->h1c->conn, h1s); |
| if ((*htx)->flags & HTX_FL_PARSING_ERROR) { |
| if (!(h1m->flags & H1_MF_RESP)) { |
| h1s->flags |= H1S_F_REQ_ERROR; |
| TRACE_USER("rejected H1 request", H1_EV_RX_DATA|H1_EV_RX_BODY|H1_EV_H1S_ERR, h1s->h1c->conn, h1s); |
| } |
| else { |
| h1s->flags |= H1S_F_RES_ERROR; |
| TRACE_USER("rejected H1 response", H1_EV_RX_DATA|H1_EV_RX_BODY|H1_EV_H1S_ERR, h1s->h1c->conn, h1s); |
| } |
| h1s->cs->flags |= CS_FL_EOI; |
| TRACE_STATE("parsing error", H1_EV_RX_DATA|H1_EV_RX_BODY|H1_EV_H1S_ERR, h1s->h1c->conn, h1s); |
| h1_capture_bad_message(h1s->h1c, h1s, h1m, buf); |
| } |
| goto end; |
| } |
| |
| if (h1m->state == H1_MSG_DATA && h1m->curr_len && h1s->cs) |
| h1s->cs->flags |= CS_FL_MAY_SPLICE; |
| else if (h1s->cs) |
| h1s->cs->flags &= ~CS_FL_MAY_SPLICE; |
| |
| *ofs += ret; |
| |
| end: |
| TRACE_LEAVE(H1_EV_RX_DATA|H1_EV_RX_BODY, h1s->h1c->conn, h1s,, (size_t[]){ret}); |
| return ret; |
| } |
| |
| /* |
| * Parse HTTP/1 trailers. It returns the number of bytes parsed if > 0, or 0 if |
| * it couldn't proceed. Parsing errors are reported by setting H1S_F_*_ERROR |
| * flag and filling h1s->err_pos and h1s->err_state fields. This functions is |
| * responsible to update the parser state <h1m>. |
| */ |
| static size_t h1_process_trailers(struct h1s *h1s, struct h1m *h1m, struct htx *htx, |
| struct buffer *buf, size_t *ofs, size_t max) |
| { |
| int ret; |
| |
| TRACE_ENTER(H1_EV_RX_DATA|H1_EV_RX_TLRS, h1s->h1c->conn, h1s,, (size_t[]){max}); |
| ret = h1_parse_msg_tlrs(h1m, htx, buf, *ofs, max); |
| if (!ret) { |
| TRACE_DEVEL("leaving on missing data or error", H1_EV_RX_DATA|H1_EV_RX_BODY, h1s->h1c->conn, h1s); |
| if (htx->flags & HTX_FL_PARSING_ERROR) { |
| if (!(h1m->flags & H1_MF_RESP)) { |
| h1s->flags |= H1S_F_REQ_ERROR; |
| TRACE_USER("rejected H1 request", H1_EV_RX_DATA|H1_EV_RX_TLRS|H1_EV_H1S_ERR, h1s->h1c->conn, h1s); |
| } |
| else { |
| h1s->flags |= H1S_F_RES_ERROR; |
| TRACE_USER("rejected H1 response", H1_EV_RX_DATA|H1_EV_RX_TLRS|H1_EV_H1S_ERR, h1s->h1c->conn, h1s); |
| } |
| h1s->cs->flags |= CS_FL_EOI; |
| TRACE_STATE("parsing error", H1_EV_RX_DATA|H1_EV_RX_TLRS|H1_EV_H1S_ERR, h1s->h1c->conn, h1s); |
| h1_capture_bad_message(h1s->h1c, h1s, h1m, buf); |
| } |
| goto end; |
| } |
| |
| *ofs += ret; |
| |
| end: |
| TRACE_LEAVE(H1_EV_RX_DATA|H1_EV_RX_TLRS, h1s->h1c->conn, h1s,, (size_t[]){ret}); |
| return ret; |
| } |
| |
| /* |
| * Add the EOM in the HTX message. It returns 1 on success or 0 if it couldn't |
| * proceed. This functions is responsible to update the parser state <h1m>. It |
| * also add the flag CS_FL_EOI on the CS. |
| */ |
| static size_t h1_process_eom(struct h1s *h1s, struct h1m *h1m, struct htx *htx, |
| struct buffer *buf, size_t *ofs, size_t max) |
| { |
| int ret; |
| |
| TRACE_ENTER(H1_EV_RX_DATA|H1_EV_RX_EOI, h1s->h1c->conn, h1s,, (size_t[]){max}); |
| ret = h1_parse_msg_eom(h1m, htx, max); |
| if (!ret) { |
| TRACE_DEVEL("leaving on missing data or error", H1_EV_RX_DATA|H1_EV_RX_EOI, h1s->h1c->conn, h1s); |
| if (htx->flags & HTX_FL_PARSING_ERROR) { |
| if (!(h1m->flags & H1_MF_RESP)) { |
| h1s->flags |= H1S_F_REQ_ERROR; |
| TRACE_USER("rejected H1 request", H1_EV_RX_DATA|H1_EV_RX_EOI|H1_EV_H1S_ERR, h1s->h1c->conn, h1s); |
| } |
| else { |
| h1s->flags |= H1S_F_RES_ERROR; |
| TRACE_USER("rejected H1 response", H1_EV_RX_DATA|H1_EV_RX_EOI|H1_EV_H1S_ERR, h1s->h1c->conn, h1s); |
| } |
| h1s->cs->flags |= CS_FL_EOI; |
| TRACE_STATE("parsing error", H1_EV_RX_DATA|H1_EV_RX_EOI|H1_EV_H1S_ERR, h1s->h1c->conn, h1s); |
| h1_capture_bad_message(h1s->h1c, h1s, h1m, buf); |
| } |
| goto end; |
| } |
| |
| h1s->flags |= H1S_F_PARSING_DONE; |
| h1s->cs->flags |= CS_FL_EOI; |
| end: |
| TRACE_LEAVE(H1_EV_RX_DATA|H1_EV_RX_EOI, h1s->h1c->conn, h1s,, (size_t[]){ret}); |
| return ret; |
| } |
| |
| /* |
| * Process incoming data. It parses data and transfer them from h1c->ibuf into |
| * <buf>. It returns the number of bytes parsed and transferred if > 0, or 0 if |
| * it couldn't proceed. |
| */ |
| static size_t h1_process_input(struct h1c *h1c, struct buffer *buf, size_t count) |
| { |
| struct h1s *h1s = h1c->h1s; |
| struct h1m *h1m; |
| struct htx *htx; |
| size_t ret, data; |
| size_t total = 0; |
| int errflag; |
| |
| htx = htx_from_buf(buf); |
| TRACE_ENTER(H1_EV_RX_DATA, h1c->conn, h1s, htx, (size_t[]){count}); |
| |
| if (!conn_is_back(h1c->conn)) { |
| h1m = &h1s->req; |
| errflag = H1S_F_REQ_ERROR; |
| } |
| else { |
| h1m = &h1s->res; |
| errflag = H1S_F_RES_ERROR; |
| } |
| |
| data = htx->data; |
| if (h1s->flags & errflag) |
| goto end; |
| |
| do { |
| size_t used = htx_used_space(htx); |
| |
| if (h1m->state <= H1_MSG_LAST_LF) { |
| TRACE_PROTO("parsing message headers", H1_EV_RX_DATA|H1_EV_RX_HDRS, h1c->conn, h1s); |
| ret = h1_process_headers(h1s, h1m, htx, &h1c->ibuf, &total, count); |
| if (!ret) |
| break; |
| |
| TRACE_USER((!(h1m->flags & H1_MF_RESP) ? "rcvd H1 request headers" : "rcvd H1 response headers"), |
| H1_EV_RX_DATA|H1_EV_RX_HDRS, h1c->conn, h1s, htx, (size_t[]){ret}); |
| |
| if ((h1m->flags & H1_MF_RESP) && |
| h1s->status < 200 && (h1s->status == 100 || h1s->status >= 102)) { |
| h1m_init_res(&h1s->res); |
| h1m->flags |= (H1_MF_NO_PHDR|H1_MF_CLEAN_CONN_HDR); |
| TRACE_STATE("1xx response rcvd", H1_EV_RX_DATA|H1_EV_RX_HDRS, h1c->conn, h1s); |
| } |
| } |
| else if (h1m->state < H1_MSG_TRAILERS) { |
| TRACE_PROTO("parsing message payload", H1_EV_RX_DATA|H1_EV_RX_BODY, h1c->conn, h1s); |
| ret = h1_process_data(h1s, h1m, &htx, &h1c->ibuf, &total, count, buf); |
| if (!ret && h1m->state != H1_MSG_DONE) |
| break; |
| |
| TRACE_PROTO((!(h1m->flags & H1_MF_RESP) ? "rcvd H1 request payload data" : "rcvd H1 response payload data"), |
| H1_EV_RX_DATA|H1_EV_RX_BODY, h1c->conn, h1s, htx, (size_t[]){ret}); |
| } |
| else if (h1m->state == H1_MSG_TRAILERS) { |
| TRACE_PROTO("parsing message trailers", H1_EV_RX_DATA|H1_EV_RX_TLRS, h1c->conn, h1s); |
| ret = h1_process_trailers(h1s, h1m, htx, &h1c->ibuf, &total, count); |
| if (!ret && h1m->state != H1_MSG_DONE) |
| break; |
| |
| TRACE_PROTO((!(h1m->flags & H1_MF_RESP) ? "rcvd H1 request trailers" : "rcvd H1 response trailers"), |
| H1_EV_RX_DATA|H1_EV_RX_TLRS, h1c->conn, h1s, htx, (size_t[]){ret}); |
| } |
| else if (h1m->state == H1_MSG_DONE) { |
| if (!(h1s->flags & H1S_F_PARSING_DONE)) { |
| if (!h1_process_eom(h1s, h1m, htx, &h1c->ibuf, &total, count)) |
| break; |
| |
| TRACE_USER((!(h1m->flags & H1_MF_RESP) ? "H1 request fully rcvd" : "H1 response fully rcvd"), |
| H1_EV_RX_DATA|H1_EV_RX_EOI, h1c->conn, h1s, htx); |
| } |
| |
| if (!(h1m->flags & H1_MF_RESP) && h1s->status == 101) |
| h1_set_req_tunnel_mode(h1s); |
| else if (h1s->req.state < H1_MSG_DONE || h1s->res.state < H1_MSG_DONE) { |
| h1c->flags |= H1C_F_IN_BUSY; |
| TRACE_STATE("switch h1c in busy mode", H1_EV_RX_DATA|H1_EV_H1C_BLK, h1c->conn, h1s); |
| } |
| break; |
| } |
| else if (h1m->state == H1_MSG_TUNNEL) { |
| TRACE_PROTO("parsing tunneled data", H1_EV_RX_DATA, h1c->conn, h1s); |
| ret = h1_process_data(h1s, h1m, &htx, &h1c->ibuf, &total, count, buf); |
| if (!ret) |
| break; |
| |
| TRACE_PROTO((!(h1m->flags & H1_MF_RESP) ? "rcvd H1 request tunneled data" : "rcvd H1 response tunneled data"), |
| H1_EV_RX_DATA|H1_EV_RX_EOI, h1c->conn, h1s, htx, (size_t[]){ret}); |
| } |
| else { |
| h1s->flags |= errflag; |
| break; |
| } |
| |
| count -= htx_used_space(htx) - used; |
| } while (!(h1s->flags & errflag)); |
| |
| if (h1s->flags & errflag) { |
| TRACE_PROTO("parsing error", H1_EV_RX_DATA, h1c->conn, h1s); |
| goto parsing_err; |
| } |
| |
| b_del(&h1c->ibuf, total); |
| |
| end: |
| htx_to_buf(htx, buf); |
| ret = htx->data - data; |
| if ((h1c->flags & H1C_F_IN_FULL) && buf_room_for_htx_data(&h1c->ibuf)) { |
| h1c->flags &= ~H1C_F_IN_FULL; |
| TRACE_STATE("h1c ibuf not full anymore", H1_EV_RX_DATA|H1_EV_H1C_BLK|H1_EV_H1C_WAKE); |
| h1c->conn->xprt->subscribe(h1c->conn, h1c->conn->xprt_ctx, SUB_RETRY_RECV, &h1c->wait_event); |
| } |
| |
| h1s->cs->flags &= ~(CS_FL_RCV_MORE | CS_FL_WANT_ROOM); |
| |
| if (!b_data(&h1c->ibuf)) |
| h1_release_buf(h1c, &h1c->ibuf); |
| if (h1s_data_pending(h1s) && !htx_is_empty(htx)) |
| h1s->cs->flags |= CS_FL_RCV_MORE | CS_FL_WANT_ROOM; |
| else if (h1s->flags & H1S_F_REOS) { |
| h1s->cs->flags |= CS_FL_EOS; |
| if (h1m->state == H1_MSG_TUNNEL) |
| h1s->cs->flags |= CS_FL_EOI; |
| else if (h1m->state > H1_MSG_LAST_LF && h1m->state < H1_MSG_DONE) |
| h1s->cs->flags |= CS_FL_ERROR; |
| } |
| |
| TRACE_LEAVE(H1_EV_RX_DATA, h1c->conn, h1s, htx, (size_t[]){ret}); |
| return ret; |
| |
| parsing_err: |
| b_reset(&h1c->ibuf); |
| htx_to_buf(htx, buf); |
| TRACE_DEVEL("leaving on error", H1_EV_RX_DATA|H1_EV_STRM_ERR, h1c->conn, h1s); |
| return 0; |
| } |
| |
| /* |
| * Process outgoing data. It parses data and transfer them from the channel buffer into |
| * h1c->obuf. It returns the number of bytes parsed and transferred if > 0, or |
| * 0 if it couldn't proceed. |
| */ |
| static size_t h1_process_output(struct h1c *h1c, struct buffer *buf, size_t count) |
| { |
| struct h1s *h1s = h1c->h1s; |
| struct h1m *h1m; |
| struct htx *chn_htx = NULL; |
| struct htx_blk *blk; |
| struct buffer tmp; |
| size_t total = 0; |
| int errflag; |
| |
| if (!count) |
| goto end; |
| |
| chn_htx = htxbuf(buf); |
| TRACE_ENTER(H1_EV_TX_DATA, h1c->conn, h1s, chn_htx, (size_t[]){count}); |
| |
| if (htx_is_empty(chn_htx)) |
| goto end; |
| |
| if (!h1_get_buf(h1c, &h1c->obuf)) { |
| h1c->flags |= H1C_F_OUT_ALLOC; |
| TRACE_STATE("waiting for h1c obuf allocation", H1_EV_TX_DATA|H1_EV_H1S_BLK, h1c->conn, h1s); |
| goto end; |
| } |
| |
| if (!conn_is_back(h1c->conn)) { |
| h1m = &h1s->res; |
| errflag = H1S_F_RES_ERROR; |
| } |
| else { |
| h1m = &h1s->req; |
| errflag = H1S_F_REQ_ERROR; |
| } |
| |
| if (h1s->flags & errflag) |
| goto end; |
| |
| /* the htx is non-empty thus has at least one block */ |
| blk = htx_get_head_blk(chn_htx); |
| |
| /* Perform some optimizations to reduce the number of buffer copies. |
| * First, if the mux's buffer is empty and the htx area contains |
| * exactly one data block of the same size as the requested count, |
| * then it's possible to simply swap the caller's buffer with the |
| * mux's output buffer and adjust offsets and length to match the |
| * entire DATA HTX block in the middle. In this case we perform a |
| * true zero-copy operation from end-to-end. This is the situation |
| * that happens all the time with large files. Second, if this is not |
| * possible, but the mux's output buffer is empty, we still have an |
| * opportunity to avoid the copy to the intermediary buffer, by making |
| * the intermediary buffer's area point to the output buffer's area. |
| * In this case we want to skip the HTX header to make sure that copies |
| * remain aligned and that this operation remains possible all the |
| * time. This goes for headers, data blocks and any data extracted from |
| * the HTX blocks. |
| */ |
| if (!b_data(&h1c->obuf)) { |
| if (htx_nbblks(chn_htx) == 1 && |
| htx_get_blk_type(blk) == HTX_BLK_DATA && |
| htx_get_blk_value(chn_htx, blk).len == count) { |
| void *old_area = h1c->obuf.area; |
| |
| TRACE_PROTO("sending message data (zero-copy)", H1_EV_TX_DATA|H1_EV_TX_BODY, h1c->conn, h1s, chn_htx, (size_t[]){count}); |
| h1c->obuf.area = buf->area; |
| h1c->obuf.head = sizeof(struct htx) + blk->addr; |
| h1c->obuf.data = count; |
| |
| buf->area = old_area; |
| buf->data = buf->head = 0; |
| |
| chn_htx = (struct htx *)buf->area; |
| htx_reset(chn_htx); |
| |
| /* The message is chunked. We need to emit the chunk |
| * size. We have at least the size of the struct htx to |
| * write the chunk envelope. It should be enough. |
| */ |
| if (h1m->flags & H1_MF_CHNK) { |
| h1_emit_chunk_size(&h1c->obuf, count); |
| h1_emit_chunk_crlf(&h1c->obuf); |
| } |
| |
| total += count; |
| if (h1m->state == H1_MSG_DATA) |
| TRACE_PROTO((!(h1m->flags & H1_MF_RESP) ? "H1 request payload data xferred" : "H1 response payload data xferred"), |
| H1_EV_TX_DATA|H1_EV_TX_BODY, h1c->conn, h1s,, (size_t[]){count}); |
| else |
| TRACE_PROTO((!(h1m->flags & H1_MF_RESP) ? "H1 request tunneled data xferred" : "H1 response tunneled data xferred"), |
| H1_EV_TX_DATA|H1_EV_TX_BODY, h1c->conn, h1s,, (size_t[]){count}); |
| goto out; |
| } |
| tmp.area = h1c->obuf.area + h1c->obuf.head; |
| } |
| else |
| tmp.area = trash.area; |
| |
| tmp.data = 0; |
| tmp.size = b_room(&h1c->obuf); |
| while (count && !(h1s->flags & errflag) && blk) { |
| struct htx_sl *sl; |
| struct ist n, v; |
| enum htx_blk_type type = htx_get_blk_type(blk); |
| uint32_t sz = htx_get_blksz(blk); |
| uint32_t vlen, chklen; |
| |
| vlen = sz; |
| if (type != HTX_BLK_DATA && vlen > count) |
| goto full; |
| |
| if (type == HTX_BLK_UNUSED) |
| goto nextblk; |
| |
| switch (h1m->state) { |
| case H1_MSG_RQBEFORE: |
| if (type != HTX_BLK_REQ_SL) |
| goto error; |
| TRACE_USER("sending request headers", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1c->conn, h1s, chn_htx); |
| sl = htx_get_blk_ptr(chn_htx, blk); |
| h1s->meth = sl->info.req.meth; |
| h1_parse_req_vsn(h1m, sl); |
| if (!h1_format_htx_reqline(sl, &tmp)) |
| goto full; |
| h1m->flags |= H1_MF_XFER_LEN; |
| if (sl->flags & HTX_SL_F_BODYLESS) |
| h1m->flags |= H1_MF_CLEN; |
| h1m->state = H1_MSG_HDR_FIRST; |
| break; |
| |
| case H1_MSG_RPBEFORE: |
| if (type != HTX_BLK_RES_SL) |
| goto error; |
| TRACE_USER("sending response headers", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1c->conn, h1s, chn_htx); |
| sl = htx_get_blk_ptr(chn_htx, blk); |
| h1s->status = sl->info.res.status; |
| h1_parse_res_vsn(h1m, sl); |
| if (!h1_format_htx_stline(sl, &tmp)) |
| goto full; |
| if (sl->flags & HTX_SL_F_XFER_LEN) |
| h1m->flags |= H1_MF_XFER_LEN; |
| if (sl->info.res.status < 200 && |
| (sl->info.res.status == 100 || sl->info.res.status >= 102)) |
| h1s->flags |= H1S_F_HAVE_O_CONN; |
| h1m->state = H1_MSG_HDR_FIRST; |
| break; |
| |
| case H1_MSG_HDR_FIRST: |
| case H1_MSG_HDR_NAME: |
| case H1_MSG_HDR_L2_LWS: |
| if (type == HTX_BLK_EOH) |
| goto last_lf; |
| if (type != HTX_BLK_HDR) |
| goto error; |
| |
| h1m->state = H1_MSG_HDR_NAME; |
| n = htx_get_blk_name(chn_htx, blk); |
| v = htx_get_blk_value(chn_htx, blk); |
| |
| /* Skip all pseudo-headers */ |
| if (*(n.ptr) == ':') |
| goto skip_hdr; |
| |
| if (isteq(n, ist("transfer-encoding"))) |
| h1_parse_xfer_enc_header(h1m, v); |
| else if (isteq(n, ist("content-length"))) { |
| /* Only skip C-L header with invalid value. */ |
| if (h1_parse_cont_len_header(h1m, &v) < 0) |
| goto skip_hdr; |
| } |
| else if (isteq(n, ist("connection"))) { |
| h1_parse_connection_header(h1m, &v); |
| if (!v.len) |
| goto skip_hdr; |
| } |
| |
| /* Skip header if same name is used to add the server name */ |
| if (!(h1m->flags & H1_MF_RESP) && h1c->px->server_id_hdr_name && |
| isteqi(n, ist2(h1c->px->server_id_hdr_name, h1c->px->server_id_hdr_len))) |
| goto skip_hdr; |
| |
| /* Try to adjust the case of the header name */ |
| if (h1c->px->options2 & (PR_O2_H1_ADJ_BUGCLI|PR_O2_H1_ADJ_BUGSRV)) |
| h1_adjust_case_outgoing_hdr(h1s, h1m, &n); |
| if (!h1_format_htx_hdr(n, v, &tmp)) |
| goto full; |
| skip_hdr: |
| h1m->state = H1_MSG_HDR_L2_LWS; |
| break; |
| |
| case H1_MSG_LAST_LF: |
| if (type != HTX_BLK_EOH) |
| goto error; |
| last_lf: |
| h1m->state = H1_MSG_LAST_LF; |
| if (!(h1s->flags & H1S_F_HAVE_O_CONN)) { |
| /* If the reply comes from haproxy while the request is |
| * not finished, we force the connection close. */ |
| if ((chn_htx->flags & HTX_FL_PROXY_RESP) && h1s->req.state != H1_MSG_DONE) { |
| h1s->flags = (h1s->flags & ~H1S_F_WANT_MSK) | H1S_F_WANT_CLO; |
| TRACE_STATE("force close mode (resp)", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1s->h1c->conn, h1s); |
| } |
| |
| /* the conn_mode must be processed. So do it */ |
| n = ist("connection"); |
| v = ist(""); |
| h1_process_output_conn_mode(h1s, h1m, &v); |
| if (v.len) { |
| /* Try to adjust the case of the header name */ |
| if (h1c->px->options2 & (PR_O2_H1_ADJ_BUGCLI|PR_O2_H1_ADJ_BUGSRV)) |
| h1_adjust_case_outgoing_hdr(h1s, h1m, &n); |
| if (!h1_format_htx_hdr(n, v, &tmp)) |
| goto full; |
| } |
| h1s->flags |= H1S_F_HAVE_O_CONN; |
| } |
| |
| if ((h1s->meth != HTTP_METH_CONNECT && |
| (h1m->flags & (H1_MF_VER_11|H1_MF_RESP|H1_MF_CLEN|H1_MF_CHNK|H1_MF_XFER_LEN)) == |
| (H1_MF_VER_11|H1_MF_XFER_LEN)) || |
| (h1s->status >= 200 && h1s->status != 204 && h1s->status != 304 && |
| h1s->meth != HTTP_METH_HEAD && !(h1s->meth == HTTP_METH_CONNECT && h1s->status == 200) && |
| (h1m->flags & (H1_MF_VER_11|H1_MF_RESP|H1_MF_CLEN|H1_MF_CHNK|H1_MF_XFER_LEN)) == |
| (H1_MF_VER_11|H1_MF_RESP|H1_MF_XFER_LEN))) { |
| /* chunking needed but header not seen */ |
| n = ist("transfer-encoding"); |
| v = ist("chunked"); |
| if (h1c->px->options2 & (PR_O2_H1_ADJ_BUGCLI|PR_O2_H1_ADJ_BUGSRV)) |
| h1_adjust_case_outgoing_hdr(h1s, h1m, &n); |
| if (!h1_format_htx_hdr(n, v, &tmp)) |
| goto full; |
| TRACE_STATE("add \"Transfer-Encoding: chunked\"", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1c->conn, h1s); |
| h1m->flags |= H1_MF_CHNK; |
| } |
| |
| /* Now add the server name to a header (if requested) */ |
| if (!(h1s->flags & H1S_F_HAVE_SRV_NAME) && |
| !(h1m->flags & H1_MF_RESP) && h1c->px->server_id_hdr_name) { |
| struct server *srv = objt_server(h1c->conn->target); |
| |
| if (srv) { |
| n = ist2(h1c->px->server_id_hdr_name, h1c->px->server_id_hdr_len); |
| v = ist(srv->id); |
| |
| /* Try to adjust the case of the header name */ |
| if (h1c->px->options2 & (PR_O2_H1_ADJ_BUGCLI|PR_O2_H1_ADJ_BUGSRV)) |
| h1_adjust_case_outgoing_hdr(h1s, h1m, &n); |
| if (!h1_format_htx_hdr(n, v, &tmp)) |
| goto full; |
| } |
| TRACE_STATE("add server name header", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1c->conn, h1s); |
| h1s->flags |= H1S_F_HAVE_SRV_NAME; |
| } |
| |
| if (!chunk_memcat(&tmp, "\r\n", 2)) |
| goto full; |
| |
| TRACE_PROTO((!(h1m->flags & H1_MF_RESP) ? "H1 request headers xferred" : "H1 response headers xferred"), |
| H1_EV_TX_DATA|H1_EV_TX_HDRS, h1c->conn, h1s); |
| |
| if (!(h1m->flags & H1_MF_RESP) && h1s->meth == HTTP_METH_CONNECT) { |
| /* a CONNECT request is sent to the server. Switch it to tunnel mode. */ |
| h1_set_req_tunnel_mode(h1s); |
| } |
| else if ((h1m->flags & H1_MF_RESP) && |
| ((h1s->meth == HTTP_METH_CONNECT && h1s->status == 200) || h1s->status == 101)) { |
| /* a successful reply to a CONNECT or a protocol switching is sent |
| * to the client. Switch the response to tunnel mode. |
| */ |
| h1_set_res_tunnel_mode(h1s); |
| TRACE_STATE("switch H1 response in tunnel mode", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1c->conn, h1s); |
| } |
| else if ((h1m->flags & H1_MF_RESP) && |
| h1s->status < 200 && (h1s->status == 100 || h1s->status >= 102)) { |
| h1m_init_res(&h1s->res); |
| h1m->flags |= (H1_MF_NO_PHDR|H1_MF_CLEAN_CONN_HDR); |
| h1s->flags &= ~H1S_F_HAVE_O_CONN; |
| TRACE_STATE("1xx response xferred", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1c->conn, h1s); |
| } |
| else if ((h1m->flags & H1_MF_RESP) && h1s->meth == HTTP_METH_HEAD) { |
| h1m->state = H1_MSG_DONE; |
| TRACE_STATE("HEAD response processed", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1c->conn, h1s); |
| } |
| else |
| h1m->state = H1_MSG_DATA; |
| break; |
| |
| case H1_MSG_DATA: |
| case H1_MSG_TUNNEL: |
| if (type == HTX_BLK_EOM) { |
| /* Chunked message without explicit trailers */ |
| if (h1m->flags & H1_MF_CHNK) { |
| if (!chunk_memcat(&tmp, "0\r\n\r\n", 5)) |
| goto full; |
| } |
| goto done; |
| } |
| else if (type == HTX_BLK_EOT || type == HTX_BLK_TLR) { |
| /* If the message is not chunked, never |
| * add the last chunk. */ |
| if ((h1m->flags & H1_MF_CHNK) && !chunk_memcat(&tmp, "0\r\n", 3)) |
| goto full; |
| TRACE_PROTO("sending message trailers", H1_EV_TX_DATA|H1_EV_TX_TLRS, h1c->conn, h1s, chn_htx); |
| goto trailers; |
| } |
| else if (type != HTX_BLK_DATA) |
| goto error; |
| |
| TRACE_PROTO("sending message data", H1_EV_TX_DATA|H1_EV_TX_BODY, h1c->conn, h1s, chn_htx, (size_t[]){sz}); |
| |
| |
| if (vlen > count) { |
| /* Get the maximum amount of data we can xferred */ |
| vlen = count; |
| } |
| |
| chklen = 0; |
| if (h1m->flags & H1_MF_CHNK) { |
| chklen = b_room(&tmp); |
| chklen = ((chklen < 16) ? 1 : (chklen < 256) ? 2 : |
| (chklen < 4096) ? 3 : (chklen < 65536) ? 4 : |
| (chklen < 1048576) ? 5 : 8); |
| chklen += 4; /* 2 x CRLF */ |
| } |
| |
| if (vlen + chklen > b_room(&tmp)) { |
| /* too large for the buffer */ |
| if (chklen >= b_room(&tmp)) |
| goto full; |
| vlen = b_room(&tmp) - chklen; |
| } |
| v = htx_get_blk_value(chn_htx, blk); |
| v.len = vlen; |
| if (!h1_format_htx_data(v, &tmp, !!(h1m->flags & H1_MF_CHNK))) |
| goto full; |
| |
| if (h1m->state == H1_MSG_DATA) |
| TRACE_PROTO((!(h1m->flags & H1_MF_RESP) ? "H1 request payload data xferred" : "H1 response payload data xferred"), |
| H1_EV_TX_DATA|H1_EV_TX_BODY, h1c->conn, h1s,, (size_t[]){v.len}); |
| else |
| TRACE_PROTO((!(h1m->flags & H1_MF_RESP) ? "H1 request tunneled data xferred" : "H1 response tunneled data xferred"), |
| H1_EV_TX_DATA|H1_EV_TX_BODY, h1c->conn, h1s,, (size_t[]){v.len}); |
| break; |
| |
| case H1_MSG_TRAILERS: |
| if (type == HTX_BLK_EOM) |
| goto done; |
| else if (type != HTX_BLK_TLR && type != HTX_BLK_EOT) |
| goto error; |
| trailers: |
| h1m->state = H1_MSG_TRAILERS; |
| /* If the message is not chunked, ignore |
| * trailers. It may happen with H2 messages. */ |
| if (!(h1m->flags & H1_MF_CHNK)) |
| break; |
| |
| if (type == HTX_BLK_EOT) { |
| if (!chunk_memcat(&tmp, "\r\n", 2)) |
| goto full; |
| TRACE_PROTO((!(h1m->flags & H1_MF_RESP) ? "H1 request trailers xferred" : "H1 response trailers xferred"), |
| H1_EV_TX_DATA|H1_EV_TX_TLRS, h1c->conn, h1s); |
| } |
| else { // HTX_BLK_TLR |
| n = htx_get_blk_name(chn_htx, blk); |
| v = htx_get_blk_value(chn_htx, blk); |
| |
| /* Try to adjust the case of the header name */ |
| if (h1c->px->options2 & (PR_O2_H1_ADJ_BUGCLI|PR_O2_H1_ADJ_BUGSRV)) |
| h1_adjust_case_outgoing_hdr(h1s, h1m, &n); |
| if (!h1_format_htx_hdr(n, v, &tmp)) |
| goto full; |
| } |
| break; |
| |
| case H1_MSG_DONE: |
| if (type != HTX_BLK_EOM) |
| goto error; |
| done: |
| h1m->state = H1_MSG_DONE; |
| if (!(h1m->flags & H1_MF_RESP) && h1s->status == 101) { |
| h1_set_req_tunnel_mode(h1s); |
| TRACE_STATE("switch H1 request in tunnel mode", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1c->conn, h1s); |
| } |
| else if (h1s->h1c->flags & H1C_F_IN_BUSY) { |
| h1s->h1c->flags &= ~H1C_F_IN_BUSY; |
| h1c->conn->xprt->subscribe(h1c->conn, h1c->conn->xprt_ctx, SUB_RETRY_RECV, &h1c->wait_event); |
| TRACE_STATE("h1c no more busy", H1_EV_TX_DATA|H1_EV_H1C_BLK|H1_EV_H1C_WAKE, h1c->conn, h1s); |
| } |
| |
| TRACE_USER((!(h1m->flags & H1_MF_RESP) ? "H1 request fully xferred" : "H1 response fully xferred"), |
| H1_EV_TX_DATA, h1c->conn, h1s); |
| break; |
| |
| default: |
| error: |
| TRACE_PROTO("formatting error", H1_EV_TX_DATA, h1c->conn, h1s); |
| /* Unexpected error during output processing */ |
| chn_htx->flags |= HTX_FL_PROCESSING_ERROR; |
| h1s->flags |= errflag; |
| h1c->flags |= H1C_F_CS_ERROR; |
| TRACE_STATE("processing error, set error on h1c/h1s", H1_EV_H1C_ERR|H1_EV_H1S_ERR, h1c->conn, h1s); |
| TRACE_DEVEL("unexpected error", H1_EV_TX_DATA|H1_EV_STRM_ERR, h1c->conn, h1s); |
| break; |
| } |
| |
| nextblk: |
| total += vlen; |
| count -= vlen; |
| if (sz == vlen) |
| blk = htx_remove_blk(chn_htx, blk); |
| else { |
| htx_cut_data_blk(chn_htx, blk, vlen); |
| break; |
| } |
| } |
| |
| copy: |
| /* when the output buffer is empty, tmp shares the same area so that we |
| * only have to update pointers and lengths. |
| */ |
| if (tmp.area == h1c->obuf.area + h1c->obuf.head) |
| h1c->obuf.data = tmp.data; |
| else |
| b_putblk(&h1c->obuf, tmp.area, tmp.data); |
| |
| htx_to_buf(chn_htx, buf); |
| out: |
| if (!buf_room_for_htx_data(&h1c->obuf)) { |
| TRACE_STATE("h1c obuf full", H1_EV_TX_DATA|H1_EV_H1S_BLK, h1c->conn, h1s); |
| h1c->flags |= H1C_F_OUT_FULL; |
| } |
| end: |
| TRACE_LEAVE(H1_EV_TX_DATA, h1c->conn, h1s, chn_htx, (size_t[]){total}); |
| return total; |
| |
| full: |
| TRACE_STATE("h1c obuf full", H1_EV_TX_DATA|H1_EV_H1S_BLK, h1c->conn, h1s); |
| h1c->flags |= H1C_F_OUT_FULL; |
| goto copy; |
| } |
| |
| /*********************************************************/ |
| /* functions below are I/O callbacks from the connection */ |
| /*********************************************************/ |
| static void h1_wake_stream_for_recv(struct h1s *h1s) |
| { |
| if (h1s && h1s->subs && h1s->subs->events & SUB_RETRY_RECV) { |
| TRACE_POINT(H1_EV_STRM_WAKE, h1s->h1c->conn, h1s); |
| tasklet_wakeup(h1s->subs->tasklet); |
| h1s->subs->events &= ~SUB_RETRY_RECV; |
| if (!h1s->subs->events) |
| h1s->subs = NULL; |
| } |
| } |
| static void h1_wake_stream_for_send(struct h1s *h1s) |
| { |
| if (h1s && h1s->subs && h1s->subs->events & SUB_RETRY_SEND) { |
| TRACE_POINT(H1_EV_STRM_WAKE, h1s->h1c->conn, h1s); |
| tasklet_wakeup(h1s->subs->tasklet); |
| h1s->subs->events &= ~SUB_RETRY_SEND; |
| if (!h1s->subs->events) |
| h1s->subs = NULL; |
| } |
| } |
| |
| /* |
| * Attempt to read data, and subscribe if none available |
| */ |
| static int h1_recv(struct h1c *h1c) |
| { |
| struct connection *conn = h1c->conn; |
| struct h1s *h1s = h1c->h1s; |
| size_t ret = 0, max; |
| int rcvd = 0; |
| int flags = 0; |
| |
| TRACE_ENTER(H1_EV_H1C_RECV, h1c->conn); |
| |
| if (h1c->wait_event.events & SUB_RETRY_RECV) { |
| TRACE_DEVEL("leaving on sub_recv", H1_EV_H1C_RECV, h1c->conn); |
| return (b_data(&h1c->ibuf)); |
| } |
| |
| if (!h1_recv_allowed(h1c)) { |
| TRACE_DEVEL("leaving on !recv_allowed", H1_EV_H1C_RECV, h1c->conn); |
| rcvd = 1; |
| goto end; |
| } |
| |
| if (!h1_get_buf(h1c, &h1c->ibuf)) { |
| h1c->flags |= H1C_F_IN_ALLOC; |
| TRACE_STATE("waiting for h1c ibuf allocation", H1_EV_H1C_RECV|H1_EV_H1C_BLK, h1c->conn); |
| goto end; |
| } |
| |
| if (h1s && (h1s->flags & (H1S_F_BUF_FLUSH|H1S_F_SPLICED_DATA))) { |
| if (!h1s_data_pending(h1s)) |
| h1_wake_stream_for_recv(h1s); |
| rcvd = 1; |
| TRACE_DEVEL("leaving on (buf_flush|spliced_data)", H1_EV_H1C_RECV, h1c->conn); |
| goto end; |
| } |
| |
| /* |
| * If we only have a small amount of data, realign it, |
| * it's probably cheaper than doing 2 recv() calls. |
| */ |
| if (b_data(&h1c->ibuf) > 0 && b_data(&h1c->ibuf) < 128) |
| b_slow_realign(&h1c->ibuf, trash.area, 0); |
| |
| /* avoid useless reads after first responses */ |
| if (h1s && (h1s->req.state == H1_MSG_RQBEFORE || h1s->res.state == H1_MSG_RPBEFORE)) |
| flags |= CO_RFL_READ_ONCE; |
| |
| max = buf_room_for_htx_data(&h1c->ibuf); |
| if (max) { |
| if (h1c->flags & H1C_F_IN_FULL) { |
| h1c->flags &= ~H1C_F_IN_FULL; |
| TRACE_STATE("h1c ibuf not full anymore", H1_EV_H1C_RECV|H1_EV_H1C_BLK); |
| } |
| |
| b_realign_if_empty(&h1c->ibuf); |
| if (!b_data(&h1c->ibuf)) { |
| /* try to pre-align the buffer like the rxbufs will be |
| * to optimize memory copies. |
| */ |
| h1c->ibuf.head = sizeof(struct htx); |
| } |
| ret = conn->xprt->rcv_buf(conn, conn->xprt_ctx, &h1c->ibuf, max, flags); |
| } |
| if (ret > 0) { |
| TRACE_DATA("data received", H1_EV_H1C_RECV, h1c->conn,,, (size_t[]){ret}); |
| rcvd = 1; |
| if (h1s && h1s->cs) { |
| h1s->cs->flags |= (CS_FL_READ_PARTIAL|CS_FL_RCV_MORE); |
| if (h1s->csinfo.t_idle == -1) |
| h1s->csinfo.t_idle = tv_ms_elapsed(&h1s->csinfo.tv_create, &now) - h1s->csinfo.t_handshake; |
| } |
| } |
| |
| if (ret > 0 || !h1_recv_allowed(h1c) || !buf_room_for_htx_data(&h1c->ibuf)) { |
| rcvd = 1; |
| goto end; |
| } |
| |
| TRACE_STATE("failed to receive data, subscribing", H1_EV_H1C_RECV, h1c->conn); |
| conn->xprt->subscribe(conn, conn->xprt_ctx, SUB_RETRY_RECV, &h1c->wait_event); |
| |
| end: |
| if (ret > 0 || (conn->flags & CO_FL_ERROR) || conn_xprt_read0_pending(conn)) |
| h1_wake_stream_for_recv(h1s); |
| |
| if (conn_xprt_read0_pending(conn) && h1s) { |
| h1s->flags |= H1S_F_REOS; |
| TRACE_STATE("read0 on connection", H1_EV_H1C_RECV, conn, h1s); |
| rcvd = 1; |
| } |
| |
| if (!b_data(&h1c->ibuf)) |
| h1_release_buf(h1c, &h1c->ibuf); |
| else if (!buf_room_for_htx_data(&h1c->ibuf)) { |
| h1c->flags |= H1C_F_IN_FULL; |
| TRACE_STATE("h1c ibuf full", H1_EV_H1C_RECV|H1_EV_H1C_BLK); |
| } |
| |
| TRACE_LEAVE(H1_EV_H1C_RECV, h1c->conn); |
| return rcvd; |
| } |
| |
| |
| /* |
| * Try to send data if possible |
| */ |
| static int h1_send(struct h1c *h1c) |
| { |
| struct connection *conn = h1c->conn; |
| unsigned int flags = 0; |
| size_t ret; |
| int sent = 0; |
| |
| TRACE_ENTER(H1_EV_H1C_SEND, h1c->conn); |
| |
| if (conn->flags & CO_FL_ERROR) { |
| TRACE_DEVEL("leaving on connection error", H1_EV_H1C_SEND, h1c->conn); |
| return 0; |
| } |
| |
| if (!b_data(&h1c->obuf)) |
| goto end; |
| |
| if (h1c->flags & H1C_F_CO_MSG_MORE) |
| flags |= CO_SFL_MSG_MORE; |
| if (h1c->flags & H1C_F_CO_STREAMER) |
| flags |= CO_SFL_STREAMER; |
| |
| ret = conn->xprt->snd_buf(conn, conn->xprt_ctx, &h1c->obuf, b_data(&h1c->obuf), flags); |
| if (ret > 0) { |
| TRACE_DATA("data sent", H1_EV_H1C_SEND, h1c->conn,,, (size_t[]){ret}); |
| if (h1c->flags & H1C_F_OUT_FULL) { |
| h1c->flags &= ~H1C_F_OUT_FULL; |
| TRACE_STATE("h1c obuf not full anymore", H1_EV_STRM_SEND|H1_EV_H1S_BLK, h1c->conn); |
| } |
| b_del(&h1c->obuf, ret); |
| sent = 1; |
| } |
| |
| if (conn->flags & (CO_FL_ERROR|CO_FL_SOCK_WR_SH)) { |
| TRACE_DEVEL("connection error or output closed", H1_EV_H1C_SEND, h1c->conn); |
| /* error or output closed, nothing to send, clear the buffer to release it */ |
| b_reset(&h1c->obuf); |
| } |
| |
| end: |
| if (!(h1c->flags & H1C_F_OUT_FULL)) |
| h1_wake_stream_for_send(h1c->h1s); |
| |
| /* We're done, no more to send */ |
| if (!b_data(&h1c->obuf)) { |
| TRACE_DEVEL("leaving with everything sent", H1_EV_H1C_SEND, h1c->conn); |
| h1_release_buf(h1c, &h1c->obuf); |
| if (h1c->flags & H1C_F_CS_SHUTW_NOW) { |
| TRACE_STATE("process pending shutdown for writes", H1_EV_H1C_SEND, h1c->conn); |
| h1_shutw_conn(conn, CS_SHW_NORMAL); |
| } |
| } |
| else if (!(h1c->wait_event.events & SUB_RETRY_SEND)) { |
| TRACE_STATE("more data to send, subscribing", H1_EV_H1C_SEND, h1c->conn); |
| conn->xprt->subscribe(conn, conn->xprt_ctx, SUB_RETRY_SEND, &h1c->wait_event); |
| } |
| |
| TRACE_LEAVE(H1_EV_H1C_SEND, h1c->conn); |
| return sent; |
| } |
| |
| |
| /* callback called on any event by the connection handler. |
| * It applies changes and returns zero, or < 0 if it wants immediate |
| * destruction of the connection. |
| */ |
| static int h1_process(struct h1c * h1c) |
| { |
| struct connection *conn = h1c->conn; |
| struct h1s *h1s = h1c->h1s; |
| |
| TRACE_ENTER(H1_EV_H1C_WAKE, conn); |
| |
| if (!conn->ctx) |
| return -1; |
| |
| if (!h1s) { |
| if (h1c->flags & (H1C_F_CS_ERROR|H1C_F_CS_SHUTDOWN) || |
| conn->flags & (CO_FL_ERROR|CO_FL_SOCK_RD_SH|CO_FL_SOCK_WR_SH)) |
| goto release; |
| if (!conn_is_back(conn) && (h1c->flags & H1C_F_CS_IDLE)) { |
| TRACE_STATE("K/A incoming connection, create new H1 stream", H1_EV_H1C_WAKE, conn); |
| if (!h1s_create(h1c, NULL, NULL)) |
| goto release; |
| } |
| else |
| goto end; |
| h1s = h1c->h1s; |
| } |
| |
| if (b_data(&h1c->ibuf) && h1s->csinfo.t_idle == -1) |
| h1s->csinfo.t_idle = tv_ms_elapsed(&h1s->csinfo.tv_create, &now) - h1s->csinfo.t_handshake; |
| |
| if (conn_xprt_read0_pending(conn)) { |
| h1s->flags |= H1S_F_REOS; |
| TRACE_STATE("read0 on connection", H1_EV_H1C_RECV, conn, h1s); |
| } |
| |
| if (!h1s_data_pending(h1s) && h1s && h1s->cs && h1s->cs->data_cb->wake && |
| (h1s->flags & H1S_F_REOS || h1c->flags & H1C_F_CS_ERROR || |
| conn->flags & (CO_FL_ERROR | CO_FL_SOCK_WR_SH))) { |
| if (h1c->flags & H1C_F_CS_ERROR || conn->flags & CO_FL_ERROR) |
| h1s->cs->flags |= CS_FL_ERROR; |
| TRACE_POINT(H1_EV_STRM_WAKE, h1c->conn, h1s); |
| h1s->cs->data_cb->wake(h1s->cs); |
| } |
| end: |
| if (h1c->task) { |
| h1c->task->expire = TICK_ETERNITY; |
| if (b_data(&h1c->obuf)) { |
| h1c->task->expire = tick_add(now_ms, ((h1c->flags & (H1C_F_CS_SHUTW_NOW|H1C_F_CS_SHUTDOWN)) |
| ? h1c->shut_timeout |
| : h1c->timeout)); |
| task_queue(h1c->task); |
| } |
| } |
| TRACE_LEAVE(H1_EV_H1C_WAKE, conn); |
| return 0; |
| |
| release: |
| h1_release(h1c); |
| TRACE_DEVEL("leaving after releasing the connection", H1_EV_H1C_WAKE); |
| return -1; |
| } |
| |
| static struct task *h1_io_cb(struct task *t, void *ctx, unsigned short status) |
| { |
| struct connection *conn; |
| struct tasklet *tl = (struct tasklet *)t; |
| int conn_in_list; |
| struct h1c *h1c; |
| int ret = 0; |
| |
| |
| HA_SPIN_LOCK(OTHER_LOCK, &toremove_lock[tid]); |
| if (tl->context == NULL) { |
| /* The connection has been taken over by another thread, |
| * we're no longer responsible for it, so just free the |
| * tasklet, and do nothing. |
| */ |
| HA_SPIN_UNLOCK(OTHER_LOCK, &toremove_lock[tid]); |
| tasklet_free(tl); |
| return NULL; |
| } |
| h1c = ctx; |
| conn = h1c->conn; |
| |
| TRACE_POINT(H1_EV_H1C_WAKE, conn); |
| |
| /* Remove the connection from the list, to be sure nobody attempts |
| * to use it while we handle the I/O events |
| */ |
| conn_in_list = conn->flags & CO_FL_LIST_MASK; |
| if (conn_in_list) |
| MT_LIST_DEL(&conn->list); |
| |
| HA_SPIN_UNLOCK(OTHER_LOCK, &toremove_lock[tid]); |
| |
| if (!(h1c->wait_event.events & SUB_RETRY_SEND)) |
| ret = h1_send(h1c); |
| if (!(h1c->wait_event.events & SUB_RETRY_RECV)) |
| ret |= h1_recv(h1c); |
| if (ret || !h1c->h1s) |
| ret = h1_process(h1c); |
| /* If we were in an idle list, we want to add it back into it, |
| * unless h1_process() returned -1, which mean it has destroyed |
| * the connection (testing !ret is enough, if h1_process() wasn't |
| * called then ret will be 0 anyway. |
| */ |
| if (!ret && conn_in_list) { |
| struct server *srv = objt_server(conn->target); |
| |
| if (conn_in_list == CO_FL_SAFE_LIST) |
| MT_LIST_ADDQ(&srv->safe_conns[tid], &conn->list); |
| else |
| MT_LIST_ADDQ(&srv->idle_conns[tid], &conn->list); |
| } |
| return NULL; |
| } |
| |
| static void h1_reset(struct connection *conn) |
| { |
| |
| } |
| |
| static int h1_wake(struct connection *conn) |
| { |
| struct h1c *h1c = conn->ctx; |
| int ret; |
| |
| TRACE_POINT(H1_EV_H1C_WAKE, conn); |
| |
| h1_send(h1c); |
| ret = h1_process(h1c); |
| if (ret == 0) { |
| struct h1s *h1s = h1c->h1s; |
| |
| if (h1s && h1s->cs && h1s->cs->data_cb->wake) { |
| TRACE_POINT(H1_EV_STRM_WAKE, h1c->conn, h1s); |
| ret = h1s->cs->data_cb->wake(h1s->cs); |
| } |
| } |
| return ret; |
| } |
| |
| /* Connection timeout management. The principle is that if there's no receipt |
| * nor sending for a certain amount of time, the connection is closed. |
| */ |
| static struct task *h1_timeout_task(struct task *t, void *context, unsigned short state) |
| { |
| struct h1c *h1c = context; |
| int expired = tick_is_expired(t->expire, now_ms); |
| |
| TRACE_POINT(H1_EV_H1C_WAKE, h1c ? h1c->conn : NULL); |
| |
| if (!expired && h1c) { |
| TRACE_DEVEL("leaving (not expired)", H1_EV_H1C_WAKE, h1c->conn); |
| return t; |
| } |
| |
| /* We're about to destroy the connection, so make sure nobody attempts |
| * to steal it from us. |
| */ |
| HA_SPIN_LOCK(OTHER_LOCK, &toremove_lock[tid]); |
| |
| if (h1c && h1c->conn->flags & CO_FL_LIST_MASK) |
| MT_LIST_DEL(&h1c->conn->list); |
| |
| /* Somebody already stole the connection from us, so we should not |
| * free it, we just have to free the task. |
| */ |
| if (!t->context) |
| h1c = NULL; |
| |
| HA_SPIN_UNLOCK(OTHER_LOCK, &toremove_lock[tid]); |
| |
| task_destroy(t); |
| |
| if (!h1c) { |
| /* resources were already deleted */ |
| TRACE_DEVEL("leaving (not more h1c)", H1_EV_H1C_WAKE); |
| return NULL; |
| } |
| |
| h1c->task = NULL; |
| /* If a stream is still attached to the mux, just set an error and wait |
| * for the stream's timeout. Otherwise, release the mux. This is only ok |
| * because same timeouts are used. |
| */ |
| if (h1c->h1s && h1c->h1s->cs) { |
| h1c->flags |= H1C_F_CS_ERROR; |
| TRACE_STATE("error on h1c, h1s still attached (expired)", H1_EV_H1C_WAKE|H1_EV_H1C_ERR, h1c->conn, h1c->h1s); |
| } |
| else |
| h1_release(h1c); |
| |
| return NULL; |
| } |
| |
| /*******************************************/ |
| /* functions below are used by the streams */ |
| /*******************************************/ |
| |
| /* |
| * Attach a new stream to a connection |
| * (Used for outgoing connections) |
| */ |
| static struct conn_stream *h1_attach(struct connection *conn, struct session *sess) |
| { |
| struct h1c *h1c = conn->ctx; |
| struct conn_stream *cs = NULL; |
| struct h1s *h1s; |
| |
| TRACE_ENTER(H1_EV_STRM_NEW, conn); |
| if (h1c->flags & H1C_F_CS_ERROR) { |
| TRACE_DEVEL("leaving on h1c error", H1_EV_STRM_NEW|H1_EV_STRM_END|H1_EV_STRM_ERR, conn); |
| goto end; |
| } |
| |
| cs = cs_new(h1c->conn); |
| if (!cs) { |
| TRACE_DEVEL("leaving on CS allocation failure", H1_EV_STRM_NEW|H1_EV_STRM_END|H1_EV_STRM_ERR, conn); |
| goto end; |
| } |
| |
| h1s = h1s_create(h1c, cs, sess); |
| if (h1s == NULL) { |
| TRACE_DEVEL("leaving on h1s creation failure", H1_EV_STRM_NEW|H1_EV_STRM_END|H1_EV_STRM_ERR, conn); |
| goto end; |
| } |
| |
| TRACE_LEAVE(H1_EV_STRM_NEW, conn, h1s); |
| return cs; |
| end: |
| cs_free(cs); |
| return NULL; |
| } |
| |
| /* Retrieves a valid conn_stream from this connection, or returns NULL. For |
| * this mux, it's easy as we can only store a single conn_stream. |
| */ |
| static const struct conn_stream *h1_get_first_cs(const struct connection *conn) |
| { |
| struct h1c *h1c = conn->ctx; |
| struct h1s *h1s = h1c->h1s; |
| |
| if (h1s) |
| return h1s->cs; |
| |
| return NULL; |
| } |
| |
| static void h1_destroy(void *ctx) |
| { |
| struct h1c *h1c = ctx; |
| |
| TRACE_POINT(H1_EV_H1C_END, h1c->conn); |
| if (!h1c->h1s || !h1c->conn || h1c->conn->ctx != h1c) |
| h1_release(h1c); |
| } |
| |
| /* |
| * Detach the stream from the connection and possibly release the connection. |
| */ |
| static void h1_detach(struct conn_stream *cs) |
| { |
| struct h1s *h1s = cs->ctx; |
| struct h1c *h1c; |
| struct session *sess; |
| int is_not_first; |
| |
| TRACE_ENTER(H1_EV_STRM_END, h1s ? h1s->h1c->conn : NULL, h1s); |
| |
| cs->ctx = NULL; |
| if (!h1s) { |
| TRACE_LEAVE(H1_EV_STRM_END); |
| return; |
| } |
| |
| sess = h1s->sess; |
| h1c = h1s->h1c; |
| h1s->cs = NULL; |
| |
| is_not_first = h1s->flags & H1S_F_NOT_FIRST; |
| h1s_destroy(h1s); |
| |
| if (conn_is_back(h1c->conn) && (h1c->flags & H1C_F_CS_IDLE)) { |
| /* If there are any excess server data in the input buffer, |
| * release it and close the connection ASAP (some data may |
| * remain in the output buffer). This happens if a server sends |
| * invalid responses. So in such case, we don't want to reuse |
| * the connection |
| */ |
| if (b_data(&h1c->ibuf)) { |
| h1_release_buf(h1c, &h1c->ibuf); |
| h1c->flags = (h1c->flags & ~H1C_F_CS_IDLE) | H1C_F_CS_SHUTW_NOW; |
| TRACE_DEVEL("remaining data on detach, kill connection", H1_EV_STRM_END|H1_EV_H1C_END); |
| goto release; |
| } |
| |
| /* Never ever allow to reuse a connection from a non-reuse backend */ |
| if ((h1c->px->options & PR_O_REUSE_MASK) == PR_O_REUSE_NEVR) |
| h1c->conn->flags |= CO_FL_PRIVATE; |
| |
| if (!(h1c->conn->owner) && (h1c->conn->flags & CO_FL_PRIVATE)) { |
| h1c->conn->owner = sess; |
| if (!session_add_conn(sess, h1c->conn, h1c->conn->target)) { |
| h1c->conn->owner = NULL; |
| h1c->conn->mux->destroy(h1c); |
| goto end; |
| } |
| if (session_check_idle_conn(sess, h1c->conn)) { |
| /* The connection got destroyed, let's leave */ |
| TRACE_DEVEL("outgoing connection killed", H1_EV_STRM_END|H1_EV_H1C_END); |
| goto end; |
| } |
| } |
| if (!(h1c->conn->flags & CO_FL_PRIVATE)) { |
| if (h1c->conn->owner == sess) |
| h1c->conn->owner = NULL; |
| h1c->conn->xprt->subscribe(h1c->conn, h1c->conn->xprt_ctx, SUB_RETRY_RECV, &h1c->wait_event); |
| if (!srv_add_to_idle_list(objt_server(h1c->conn->target), h1c->conn, is_not_first)) { |
| /* The server doesn't want it, let's kill the connection right away */ |
| h1c->conn->mux->destroy(h1c); |
| TRACE_DEVEL("outgoing connection killed", H1_EV_STRM_END|H1_EV_H1C_END); |
| goto end; |
| } |
| /* At this point, the connection has been added to the |
| * server idle list, so another thread may already have |
| * hijacked it, so we can't do anything with it. |
| */ |
| return; |
| } |
| } |
| |
| release: |
| /* We don't want to close right now unless the connection is in error or shut down for writes */ |
| if ((h1c->flags & (H1C_F_CS_ERROR|H1C_F_CS_SHUTDOWN|H1C_F_UPG_H2C)) || |
| (h1c->conn->flags & (CO_FL_ERROR|CO_FL_SOCK_WR_SH)) || |
| ((h1c->flags & H1C_F_CS_SHUTW_NOW) && !b_data(&h1c->obuf)) || |
| !h1c->conn->owner) { |
| TRACE_DEVEL("killing dead connection", H1_EV_STRM_END, h1c->conn); |
| h1_release(h1c); |
| } |
| else { |
| /* If we have a new request, process it immediately */ |
| if (unlikely(b_data(&h1c->ibuf))) |
| h1_process(h1c); |
| else |
| h1c->conn->xprt->subscribe(h1c->conn, h1c->conn->xprt_ctx, SUB_RETRY_RECV, &h1c->wait_event); |
| if (h1c->task) { |
| h1c->task->expire = TICK_ETERNITY; |
| if ((!h1c->h1s && !conn_is_back(h1c->conn)) || b_data(&h1c->obuf)) { |
| /* front connections waiting for a stream, as well as any connection with |
| * pending data, need a timeout. |
| */ |
| h1c->task->expire = tick_add(now_ms, ((h1c->flags & (H1C_F_CS_SHUTW_NOW|H1C_F_CS_SHUTDOWN)) |
| ? h1c->shut_timeout |
| : h1c->timeout)); |
| task_queue(h1c->task); |
| TRACE_DEVEL("refreshing connection's timeout", H1_EV_STRM_END, h1c->conn); |
| } |
| } |
| } |
| end: |
| TRACE_LEAVE(H1_EV_STRM_END); |
| } |
| |
| |
| static void h1_shutr(struct conn_stream *cs, enum cs_shr_mode mode) |
| { |
| struct h1s *h1s = cs->ctx; |
| struct h1c *h1c; |
| |
| if (!h1s) |
| return; |
| h1c = h1s->h1c; |
| |
| TRACE_ENTER(H1_EV_STRM_SHUT, h1c->conn, h1s); |
| |
| if (cs->flags & CS_FL_KILL_CONN) { |
| TRACE_STATE("stream wants to kill the connection", H1_EV_STRM_SHUT, h1c->conn, h1s); |
| goto do_shutr; |
| } |
| if (h1c->conn->flags & (CO_FL_ERROR | CO_FL_SOCK_RD_SH | CO_FL_SOCK_WR_SH)) { |
| TRACE_STATE("shutdown on connection (error|rd_sh|wr_sh)", H1_EV_STRM_SHUT, h1c->conn, h1s); |
| goto do_shutr; |
| } |
| |
| if ((h1c->flags & H1C_F_UPG_H2C) || (h1s->flags & H1S_F_WANT_KAL)) { |
| TRACE_STATE("keep connection alive (upg_h2c|want_kal)", H1_EV_STRM_SHUT, h1c->conn, h1s); |
| goto end; |
| } |
| |
| do_shutr: |
| /* NOTE: Be sure to handle abort (cf. h2_shutr) */ |
| if (cs->flags & CS_FL_SHR) |
| goto end; |
| if (conn_xprt_ready(cs->conn) && cs->conn->xprt->shutr) |
| cs->conn->xprt->shutr(cs->conn, cs->conn->xprt_ctx, |
| (mode == CS_SHR_DRAIN)); |
| end: |
| TRACE_LEAVE(H1_EV_STRM_SHUT, h1c->conn, h1s); |
| } |
| |
| static void h1_shutw(struct conn_stream *cs, enum cs_shw_mode mode) |
| { |
| struct h1s *h1s = cs->ctx; |
| struct h1c *h1c; |
| |
| if (!h1s) |
| return; |
| h1c = h1s->h1c; |
| |
| TRACE_ENTER(H1_EV_STRM_SHUT, h1c->conn, h1s); |
| |
| if (cs->flags & CS_FL_KILL_CONN) { |
| TRACE_STATE("stream wants to kill the connection", H1_EV_STRM_SHUT, h1c->conn, h1s); |
| goto do_shutw; |
| } |
| if (h1c->conn->flags & (CO_FL_ERROR | CO_FL_SOCK_RD_SH | CO_FL_SOCK_WR_SH)) { |
| TRACE_STATE("shutdown on connection (error|rd_sh|wr_sh)", H1_EV_STRM_SHUT, h1c->conn, h1s); |
| goto do_shutw; |
| } |
| |
| if ((h1c->flags & H1C_F_UPG_H2C) || |
| ((h1s->flags & H1S_F_WANT_KAL) && h1s->req.state == H1_MSG_DONE && h1s->res.state == H1_MSG_DONE)) { |
| TRACE_STATE("keep connection alive (upg_h2c|want_kal)", H1_EV_STRM_SHUT, h1c->conn, h1s); |
| goto end; |
| } |
| |
| do_shutw: |
| h1c->flags |= H1C_F_CS_SHUTW_NOW; |
| if ((cs->flags & CS_FL_SHW) || b_data(&h1c->obuf)) |
| goto end; |
| h1_shutw_conn(cs->conn, mode); |
| end: |
| TRACE_LEAVE(H1_EV_STRM_SHUT, h1c->conn, h1s); |
| } |
| |
| static void h1_shutw_conn(struct connection *conn, enum cs_shw_mode mode) |
| { |
| struct h1c *h1c = conn->ctx; |
| |
| TRACE_ENTER(H1_EV_STRM_SHUT, conn, h1c->h1s); |
| conn_xprt_shutw(conn); |
| conn_sock_shutw(conn, (mode == CS_SHW_NORMAL)); |
| h1c->flags = (h1c->flags & ~H1C_F_CS_SHUTW_NOW) | H1C_F_CS_SHUTDOWN; |
| TRACE_LEAVE(H1_EV_STRM_SHUT, conn, h1c->h1s); |
| } |
| |
| /* Called from the upper layer, to unsubscribe <es> from events <event_type> |
| * The <es> pointer is not allowed to differ from the one passed to the |
| * subscribe() call. It always returns zero. |
| */ |
| static int h1_unsubscribe(struct conn_stream *cs, int event_type, struct wait_event *es) |
| { |
| struct h1s *h1s = cs->ctx; |
| |
| if (!h1s) |
| return 0; |
| |
| BUG_ON(event_type & ~(SUB_RETRY_SEND|SUB_RETRY_RECV)); |
| BUG_ON(h1s->subs && h1s->subs != es); |
| |
| es->events &= ~event_type; |
| if (!es->events) |
| h1s->subs = NULL; |
| |
| if (event_type & SUB_RETRY_RECV) |
| TRACE_DEVEL("unsubscribe(recv)", H1_EV_STRM_RECV, h1s->h1c->conn, h1s); |
| |
| if (event_type & SUB_RETRY_SEND) |
| TRACE_DEVEL("unsubscribe(send)", H1_EV_STRM_SEND, h1s->h1c->conn, h1s); |
| |
| return 0; |
| } |
| |
| /* Called from the upper layer, to subscribe <es> to events <event_type>. The |
| * event subscriber <es> is not allowed to change from a previous call as long |
| * as at least one event is still subscribed. The <event_type> must only be a |
| * combination of SUB_RETRY_RECV and SUB_RETRY_SEND. It always returns 0, unless |
| * the conn_stream <cs> was already detached, in which case it will return -1. |
| */ |
| static int h1_subscribe(struct conn_stream *cs, int event_type, struct wait_event *es) |
| { |
| struct h1s *h1s = cs->ctx; |
| struct h1c *h1c; |
| |
| if (!h1s) |
| return -1; |
| |
| BUG_ON(event_type & ~(SUB_RETRY_SEND|SUB_RETRY_RECV)); |
| BUG_ON(h1s->subs && h1s->subs != es); |
| |
| es->events |= event_type; |
| h1s->subs = es; |
| |
| if (event_type & SUB_RETRY_RECV) |
| TRACE_DEVEL("subscribe(recv)", H1_EV_STRM_RECV, h1s->h1c->conn, h1s); |
| |
| |
| if (event_type & SUB_RETRY_SEND) { |
| TRACE_DEVEL("subscribe(send)", H1_EV_STRM_SEND, h1s->h1c->conn, h1s); |
| /* |
| * If the conn_stream attempt to subscribe, and the |
| * mux isn't subscribed to the connection, then it |
| * probably means the connection wasn't established |
| * yet, so we have to subscribe. |
| */ |
| h1c = h1s->h1c; |
| if (!(h1c->wait_event.events & SUB_RETRY_SEND)) |
| h1c->conn->xprt->subscribe(h1c->conn, |
| h1c->conn->xprt_ctx, |
| SUB_RETRY_SEND, |
| &h1c->wait_event); |
| } |
| return 0; |
| } |
| |
| /* Called from the upper layer, to receive data */ |
| static size_t h1_rcv_buf(struct conn_stream *cs, struct buffer *buf, size_t count, int flags) |
| { |
| struct h1s *h1s = cs->ctx; |
| struct h1c *h1c = h1s->h1c; |
| struct h1m *h1m = (!conn_is_back(cs->conn) ? &h1s->req : &h1s->res); |
| size_t ret = 0; |
| |
| TRACE_ENTER(H1_EV_STRM_RECV, h1c->conn, h1s,, (size_t[]){count}); |
| if (!(h1c->flags & H1C_F_IN_ALLOC)) |
| ret = h1_process_input(h1c, buf, count); |
| else |
| TRACE_DEVEL("h1c ibuf not allocated", H1_EV_H1C_RECV|H1_EV_H1C_BLK, h1c->conn); |
| |
| if (flags & CO_RFL_BUF_FLUSH) { |
| if (h1m->state != H1_MSG_TUNNEL || (h1m->state == H1_MSG_DATA && h1m->curr_len)) { |
| h1s->flags |= H1S_F_BUF_FLUSH; |
| TRACE_STATE("flush stream's buffer", H1_EV_STRM_RECV, h1c->conn, h1s); |
| } |
| } |
| else { |
| if (h1s->flags & H1S_F_SPLICED_DATA) { |
| h1s->flags &= ~H1S_F_SPLICED_DATA; |
| TRACE_STATE("disable splicing", H1_EV_STRM_RECV, h1c->conn, h1s); |
| } |
| if (h1m->state != H1_MSG_DONE && !(h1c->wait_event.events & SUB_RETRY_RECV)) |
| h1c->conn->xprt->subscribe(h1c->conn, h1c->conn->xprt_ctx, SUB_RETRY_RECV, &h1c->wait_event); |
| } |
| TRACE_LEAVE(H1_EV_STRM_RECV, h1c->conn, h1s,, (size_t[]){ret}); |
| return ret; |
| } |
| |
| |
| /* Called from the upper layer, to send data */ |
| static size_t h1_snd_buf(struct conn_stream *cs, struct buffer *buf, size_t count, int flags) |
| { |
| struct h1s *h1s = cs->ctx; |
| struct h1c *h1c; |
| size_t total = 0; |
| |
| if (!h1s) |
| return 0; |
| h1c = h1s->h1c; |
| |
| TRACE_ENTER(H1_EV_STRM_SEND, h1c->conn, h1s,, (size_t[]){count}); |
| |
| /* If we're not connected yet, or we're waiting for a handshake, stop |
| * now, as we don't want to remove everything from the channel buffer |
| * before we're sure we can send it. |
| */ |
| if (h1c->conn->flags & CO_FL_WAIT_XPRT) { |
| TRACE_LEAVE(H1_EV_STRM_SEND, h1c->conn, h1s); |
| return 0; |
| } |
| |
| /* Inherit some flags from the upper layer */ |
| h1c->flags &= ~(H1C_F_CO_MSG_MORE|H1C_F_CO_STREAMER); |
| if (flags & CO_SFL_MSG_MORE) |
| h1c->flags |= H1C_F_CO_MSG_MORE; |
| if (flags & CO_SFL_STREAMER) |
| h1c->flags |= H1C_F_CO_STREAMER; |
| |
| while (count) { |
| size_t ret = 0; |
| |
| if (!(h1c->flags & (H1C_F_OUT_FULL|H1C_F_OUT_ALLOC))) |
| ret = h1_process_output(h1c, buf, count); |
| else |
| TRACE_DEVEL("h1c obuf not allocated", H1_EV_STRM_SEND|H1_EV_H1S_BLK, h1c->conn, h1s); |
| if (!ret) |
| break; |
| total += ret; |
| count -= ret; |
| if ((h1c->wait_event.events & SUB_RETRY_SEND) || !h1_send(h1c)) |
| break; |
| } |
| |
| TRACE_LEAVE(H1_EV_STRM_SEND, h1c->conn, h1s,, (size_t[]){total}); |
| return total; |
| } |
| |
| #if defined(USE_LINUX_SPLICE) |
| /* Send and get, using splicing */ |
| static int h1_rcv_pipe(struct conn_stream *cs, struct pipe *pipe, unsigned int count) |
| { |
| struct h1s *h1s = cs->ctx; |
| struct h1m *h1m = (!conn_is_back(cs->conn) ? &h1s->req : &h1s->res); |
| int ret = 0; |
| |
| TRACE_ENTER(H1_EV_STRM_RECV, cs->conn, h1s,, (size_t[]){count}); |
| |
| if ((h1m->flags & H1_MF_CHNK) || (h1m->state != H1_MSG_DATA && h1m->state != H1_MSG_TUNNEL)) { |
| h1s->flags &= ~(H1S_F_BUF_FLUSH|H1S_F_SPLICED_DATA); |
| TRACE_STATE("disable splicing on !(msg_data|msg_tunnel)", H1_EV_STRM_RECV, cs->conn, h1s); |
| if (!(h1s->h1c->wait_event.events & SUB_RETRY_RECV)) { |
| TRACE_STATE("restart receiving data, subscribing", H1_EV_STRM_RECV, cs->conn, h1s); |
| cs->conn->xprt->subscribe(cs->conn, cs->conn->xprt_ctx, SUB_RETRY_RECV, &h1s->h1c->wait_event); |
| } |
| goto end; |
| } |
| |
| if (h1s_data_pending(h1s)) { |
| h1s->flags |= H1S_F_BUF_FLUSH; |
| TRACE_STATE("flush input buffer before splicing", H1_EV_STRM_RECV, cs->conn, h1s); |
| goto end; |
| } |
| |
| h1s->flags &= ~H1S_F_BUF_FLUSH; |
| h1s->flags |= H1S_F_SPLICED_DATA; |
| TRACE_STATE("enable splicing", H1_EV_STRM_RECV, cs->conn, h1s); |
| if (h1m->state == H1_MSG_DATA && count > h1m->curr_len) |
| count = h1m->curr_len; |
| ret = cs->conn->xprt->rcv_pipe(cs->conn, cs->conn->xprt_ctx, pipe, count); |
| if (h1m->state == H1_MSG_DATA && ret >= 0) { |
| h1m->curr_len -= ret; |
| if (!h1m->curr_len) { |
| h1s->flags &= ~(H1S_F_BUF_FLUSH|H1S_F_SPLICED_DATA); |
| TRACE_STATE("disable splicing on !curr_len", H1_EV_STRM_RECV, cs->conn, h1s); |
| } |
| } |
| |
| end: |
| if (conn_xprt_read0_pending(cs->conn)) { |
| h1s->flags |= H1S_F_REOS; |
| h1s->flags &= ~(H1S_F_BUF_FLUSH|H1S_F_SPLICED_DATA); |
| TRACE_STATE("read0 on connection", H1_EV_STRM_RECV, cs->conn, h1s); |
| } |
| |
| if (h1m->state != H1_MSG_DATA || !h1m->curr_len) |
| cs->flags &= ~CS_FL_MAY_SPLICE; |
| |
| TRACE_LEAVE(H1_EV_STRM_RECV, cs->conn, h1s); |
| return ret; |
| } |
| |
| static int h1_snd_pipe(struct conn_stream *cs, struct pipe *pipe) |
| { |
| struct h1s *h1s = cs->ctx; |
| int ret = 0; |
| |
| TRACE_ENTER(H1_EV_STRM_SEND, cs->conn, h1s,, (size_t[]){pipe->data}); |
| |
| if (b_data(&h1s->h1c->obuf)) |
| goto end; |
| |
| ret = cs->conn->xprt->snd_pipe(cs->conn, cs->conn->xprt_ctx, pipe); |
| end: |
| if (pipe->data) { |
| if (!(h1s->h1c->wait_event.events & SUB_RETRY_SEND)) { |
| TRACE_STATE("more data to send, subscribing", H1_EV_STRM_SEND, cs->conn, h1s); |
| cs->conn->xprt->subscribe(cs->conn, cs->conn->xprt_ctx, SUB_RETRY_SEND, &h1s->h1c->wait_event); |
| } |
| } |
| |
| TRACE_LEAVE(H1_EV_STRM_SEND, cs->conn, h1s); |
| return ret; |
| } |
| #endif |
| |
| static int h1_ctl(struct connection *conn, enum mux_ctl_type mux_ctl, void *output) |
| { |
| int ret = 0; |
| switch (mux_ctl) { |
| case MUX_STATUS: |
| if (!(conn->flags & CO_FL_WAIT_XPRT)) |
| ret |= MUX_STATUS_READY; |
| return ret; |
| default: |
| return -1; |
| } |
| } |
| |
| /* for debugging with CLI's "show fd" command */ |
| static void h1_show_fd(struct buffer *msg, struct connection *conn) |
| { |
| struct h1c *h1c = conn->ctx; |
| struct h1s *h1s = h1c->h1s; |
| |
| chunk_appendf(msg, " h1c.flg=0x%x .sub=%d .ibuf=%u@%p+%u/%u .obuf=%u@%p+%u/%u", |
| h1c->flags, h1c->wait_event.events, |
| (unsigned int)b_data(&h1c->ibuf), b_orig(&h1c->ibuf), |
| (unsigned int)b_head_ofs(&h1c->ibuf), (unsigned int)b_size(&h1c->ibuf), |
| (unsigned int)b_data(&h1c->obuf), b_orig(&h1c->obuf), |
| (unsigned int)b_head_ofs(&h1c->obuf), (unsigned int)b_size(&h1c->obuf)); |
| |
| if (h1s) { |
| char *method; |
| |
| if (h1s->meth < HTTP_METH_OTHER) |
| method = http_known_methods[h1s->meth].ptr; |
| else |
| method = "UNKNOWN"; |
| chunk_appendf(msg, " h1s=%p h1s.flg=0x%x .req.state=%s .res.state=%s" |
| " .meth=%s status=%d", |
| h1s, h1s->flags, |
| h1m_state_str(h1s->req.state), |
| h1m_state_str(h1s->res.state), method, h1s->status); |
| if (h1s->cs) |
| chunk_appendf(msg, " .cs.flg=0x%08x .cs.data=%p", |
| h1s->cs->flags, h1s->cs->data); |
| } |
| } |
| |
| |
| /* Add an entry in the headers map. Returns -1 on error and 0 on success. */ |
| static int add_hdr_case_adjust(const char *from, const char *to, char **err) |
| { |
| struct h1_hdr_entry *entry; |
| |
| /* Be sure there is a non-empty <to> */ |
| if (!strlen(to)) { |
| memprintf(err, "expect <to>"); |
| return -1; |
| } |
| |
| /* Be sure only the case differs between <from> and <to> */ |
| if (strcasecmp(from, to)) { |
| memprintf(err, "<from> and <to> must not differ execpt the case"); |
| return -1; |
| } |
| |
| /* Be sure <from> does not already existsin the tree */ |
| if (ebis_lookup(&hdrs_map.map, from)) { |
| memprintf(err, "duplicate entry '%s'", from); |
| return -1; |
| } |
| |
| /* Create the entry and insert it in the tree */ |
| entry = malloc(sizeof(*entry)); |
| if (!entry) { |
| memprintf(err, "out of memory"); |
| return -1; |
| } |
| |
| entry->node.key = strdup(from); |
| entry->name.ptr = strdup(to); |
| entry->name.len = strlen(to); |
| if (!entry->node.key || !entry->name.ptr) { |
| free(entry->node.key); |
| istfree(&entry->name); |
| free(entry); |
| memprintf(err, "out of memory"); |
| return -1; |
| } |
| ebis_insert(&hdrs_map.map, &entry->node); |
| return 0; |
| } |
| |
| /* Migrate the the connection to the current thread. |
| * Return 0 if successful, non-zero otherwise. |
| * Expected to be called with the old thread lock held. |
| */ |
| static int h1_takeover(struct connection *conn) |
| { |
| struct h1c *h1c = conn->ctx; |
| |
| if (fd_takeover(conn->handle.fd, conn) != 0) |
| return -1; |
| if (h1c->wait_event.events) |
| h1c->conn->xprt->unsubscribe(h1c->conn, h1c->conn->xprt_ctx, |
| h1c->wait_event.events, &h1c->wait_event); |
| /* To let the tasklet know it should free itself, and do nothing else, |
| * set its context to NULL. |
| */ |
| h1c->wait_event.tasklet->context = NULL; |
| tasklet_wakeup(h1c->wait_event.tasklet); |
| if (h1c->task) { |
| h1c->task->context = NULL; |
| /* Wake the task, to let it free itself */ |
| task_wakeup(h1c->task, TASK_WOKEN_OTHER); |
| |
| h1c->task = task_new(tid_bit); |
| if (!h1c->task) { |
| h1_release(h1c); |
| return -1; |
| } |
| h1c->task->process = h1_timeout_task; |
| h1c->task->context = h1c; |
| } |
| h1c->wait_event.tasklet = tasklet_new(); |
| if (!h1c->wait_event.tasklet) { |
| h1_release(h1c); |
| return -1; |
| } |
| h1c->wait_event.tasklet->process = h1_io_cb; |
| h1c->wait_event.tasklet->context = h1c; |
| h1c->conn->xprt->subscribe(h1c->conn, h1c->conn->xprt_ctx, |
| SUB_RETRY_RECV, &h1c->wait_event); |
| |
| return 0; |
| } |
| |
| |
| static void h1_hdeaders_case_adjust_deinit() |
| { |
| struct ebpt_node *node, *next; |
| struct h1_hdr_entry *entry; |
| |
| node = ebpt_first(&hdrs_map.map); |
| while (node) { |
| next = ebpt_next(node); |
| ebpt_delete(node); |
| entry = container_of(node, struct h1_hdr_entry, node); |
| free(entry->node.key); |
| istfree(&entry->name); |
| free(entry); |
| node = next; |
| } |
| free(hdrs_map.name); |
| } |
| |
| static int cfg_h1_headers_case_adjust_postparser() |
| { |
| FILE *file = NULL; |
| char *c, *key_beg, *key_end, *value_beg, *value_end; |
| char *err; |
| int rc, line = 0, err_code = 0; |
| |
| if (!hdrs_map.name) |
| goto end; |
| |
| file = fopen(hdrs_map.name, "r"); |
| if (!file) { |
| ha_alert("config : h1-outgoing-headers-case-adjust-file '%s': failed to open file.\n", |
| hdrs_map.name); |
| err_code |= ERR_ALERT | ERR_FATAL; |
| goto end; |
| } |
| |
| /* now parse all lines. The file may contain only two header name per |
| * line, separated by spaces. All heading and trailing spaces will be |
| * ignored. Lines starting with a # are ignored. |
| */ |
| while (fgets(trash.area, trash.size, file) != NULL) { |
| line++; |
| c = trash.area; |
| |
| /* strip leading spaces and tabs */ |
| while (*c == ' ' || *c == '\t') |
| c++; |
| |
| /* ignore emptu lines, or lines beginning with a dash */ |
| if (*c == '#' || *c == '\0' || *c == '\r' || *c == '\n') |
| continue; |
| |
| /* look for the end of the key */ |
| key_beg = c; |
| while (*c != '\0' && *c != ' ' && *c != '\t' && *c != '\n' && *c != '\r') |
| c++; |
| key_end = c; |
| |
| /* strip middle spaces and tabs */ |
| while (*c == ' ' || *c == '\t') |
| c++; |
| |
| /* look for the end of the value, it is the end of the line */ |
| value_beg = c; |
| while (*c && *c != '\n' && *c != '\r') |
| c++; |
| value_end = c; |
| |
| /* trim possibly trailing spaces and tabs */ |
| while (value_end > value_beg && (value_end[-1] == ' ' || value_end[-1] == '\t')) |
| value_end--; |
| |
| /* set final \0 and check entries */ |
| *key_end = '\0'; |
| *value_end = '\0'; |
| |
| err = NULL; |
| rc = add_hdr_case_adjust(key_beg, value_beg, &err); |
| if (rc < 0) { |
| ha_alert("config : h1-outgoing-headers-case-adjust-file '%s' : %s at line %d.\n", |
| hdrs_map.name, err, line); |
| err_code |= ERR_ALERT | ERR_FATAL; |
| free(err); |
| goto end; |
| } |
| if (rc > 0) { |
| ha_warning("config : h1-outgoing-headers-case-adjust-file '%s' : %s at line %d.\n", |
| hdrs_map.name, err, line); |
| err_code |= ERR_WARN; |
| free(err); |
| } |
| } |
| |
| end: |
| if (file) |
| fclose(file); |
| hap_register_post_deinit(h1_hdeaders_case_adjust_deinit); |
| return err_code; |
| } |
| |
| |
| /* config parser for global "h1-outgoing-header-case-adjust" */ |
| static int cfg_parse_h1_header_case_adjust(char **args, int section_type, struct proxy *curpx, |
| struct proxy *defpx, const char *file, int line, |
| char **err) |
| { |
| if (too_many_args(2, args, err, NULL)) |
| return -1; |
| if (!*(args[1]) || !*(args[2])) { |
| memprintf(err, "'%s' expects <from> and <to> as argument.", args[0]); |
| return -1; |
| } |
| return add_hdr_case_adjust(args[1], args[2], err); |
| } |
| |
| /* config parser for global "h1-outgoing-headers-case-adjust-file" */ |
| static int cfg_parse_h1_headers_case_adjust_file(char **args, int section_type, struct proxy *curpx, |
| struct proxy *defpx, const char *file, int line, |
| char **err) |
| { |
| if (too_many_args(1, args, err, NULL)) |
| return -1; |
| if (!*(args[1])) { |
| memprintf(err, "'%s' expects <file> as argument.", args[0]); |
| return -1; |
| } |
| free(hdrs_map.name); |
| hdrs_map.name = strdup(args[1]); |
| return 0; |
| } |
| |
| |
| /* config keyword parsers */ |
| static struct cfg_kw_list cfg_kws = {{ }, { |
| { CFG_GLOBAL, "h1-case-adjust", cfg_parse_h1_header_case_adjust }, |
| { CFG_GLOBAL, "h1-case-adjust-file", cfg_parse_h1_headers_case_adjust_file }, |
| { 0, NULL, NULL }, |
| } |
| }; |
| |
| INITCALL1(STG_REGISTER, cfg_register_keywords, &cfg_kws); |
| REGISTER_CONFIG_POSTPARSER("h1-headers-map", cfg_h1_headers_case_adjust_postparser); |
| |
| |
| /****************************************/ |
| /* MUX initialization and instantiation */ |
| /****************************************/ |
| |
| /* The mux operations */ |
| static const struct mux_ops mux_h1_ops = { |
| .init = h1_init, |
| .wake = h1_wake, |
| .attach = h1_attach, |
| .get_first_cs = h1_get_first_cs, |
| .get_cs_info = h1_get_cs_info, |
| .detach = h1_detach, |
| .destroy = h1_destroy, |
| .avail_streams = h1_avail_streams, |
| .used_streams = h1_used_streams, |
| .rcv_buf = h1_rcv_buf, |
| .snd_buf = h1_snd_buf, |
| #if defined(USE_LINUX_SPLICE) |
| .rcv_pipe = h1_rcv_pipe, |
| .snd_pipe = h1_snd_pipe, |
| #endif |
| .subscribe = h1_subscribe, |
| .unsubscribe = h1_unsubscribe, |
| .shutr = h1_shutr, |
| .shutw = h1_shutw, |
| .show_fd = h1_show_fd, |
| .reset = h1_reset, |
| .ctl = h1_ctl, |
| .takeover = h1_takeover, |
| .flags = MX_FL_HTX, |
| .name = "H1", |
| }; |
| |
| |
| /* this mux registers default HTX proto */ |
| static struct mux_proto_list mux_proto_htx = |
| { .token = IST(""), .mode = PROTO_MODE_HTTP, .side = PROTO_SIDE_BOTH, .mux = &mux_h1_ops }; |
| |
| INITCALL1(STG_REGISTER, register_mux_proto, &mux_proto_htx); |
| |
| /* |
| * Local variables: |
| * c-indent-level: 8 |
| * c-basic-offset: 8 |
| * End: |
| */ |