| # This GNU Makefile supports different OS and CPU combinations. |
| # |
| # You should use it this way : |
| # [g]make TARGET=os ARCH=arch CPU=cpu USE_xxx=1 ... |
| # |
| # By default the detailed commands are hidden for a cleaner output, but you may |
| # see them by appending "V=1" to the make command. |
| # |
| # Valid USE_* options are the following. Most of them are automatically set by |
| # the TARGET, others have to be explicitly specified : |
| # USE_EPOLL : enable epoll() on Linux 2.6. Automatic. |
| # USE_KQUEUE : enable kqueue() on BSD. Automatic. |
| # USE_MY_EPOLL : redefine epoll_* syscalls. Automatic. |
| # USE_MY_SPLICE : redefine the splice syscall if build fails without. |
| # USE_NETFILTER : enable netfilter on Linux. Automatic. |
| # USE_PCRE : enable use of libpcre for regex. Recommended. |
| # USE_PCRE_JIT : enable JIT for faster regex on libpcre >= 8.32 |
| # USE_PCRE2 : enable use of libpcre2 for regex. |
| # USE_PCRE2_JIT : enable JIT for faster regex on libpcre2 |
| # USE_POLL : enable poll(). Automatic. |
| # USE_PRIVATE_CACHE : disable shared memory cache of ssl sessions. |
| # USE_THREAD : enable threads support. |
| # USE_PTHREAD_PSHARED : enable pthread process shared mutex on sslcache. |
| # USE_REGPARM : enable regparm optimization. Recommended on x86. |
| # USE_STATIC_PCRE : enable static libpcre. Recommended. |
| # USE_STATIC_PCRE2 : enable static libpcre2. |
| # USE_TPROXY : enable transparent proxy. Automatic. |
| # USE_LINUX_TPROXY : enable full transparent proxy. Automatic. |
| # USE_LINUX_SPLICE : enable kernel 2.6 splicing. Automatic. |
| # USE_LIBCRYPT : enable crypted passwords using -lcrypt |
| # USE_CRYPT_H : set it if your system requires including crypt.h |
| # USE_VSYSCALL : enable vsyscall on Linux x86, bypassing libc |
| # USE_GETADDRINFO : use getaddrinfo() to resolve IPv6 host names. |
| # USE_OPENSSL : enable use of OpenSSL. Recommended, but see below. |
| # USE_LUA : enable Lua support. |
| # USE_FUTEX : enable use of futex on kernel 2.6. Automatic. |
| # USE_ACCEPT4 : enable use of accept4() on linux. Automatic. |
| # USE_MY_ACCEPT4 : use own implemention of accept4() if glibc < 2.10. |
| # USE_ZLIB : enable zlib library support. |
| # USE_SLZ : enable slz library instead of zlib (pick at most one). |
| # USE_CPU_AFFINITY : enable pinning processes to CPU on Linux. Automatic. |
| # USE_TFO : enable TCP fast open. Supported on Linux >= 3.7. |
| # USE_NS : enable network namespace support. Supported on Linux >= 2.6.24. |
| # USE_DL : enable it if your system requires -ldl. Automatic on Linux. |
| # USE_RT : enable it if your system requires -lrt. Automatic on Linux. |
| # USE_DEVICEATLAS : enable DeviceAtlas api. |
| # USE_51DEGREES : enable third party device detection library from 51Degrees |
| # USE_SYSTEMD : enable sd_notify() support. |
| # |
| # Options can be forced by specifying "USE_xxx=1" or can be disabled by using |
| # "USE_xxx=" (empty string). |
| # |
| # Variables useful for packagers : |
| # CC is set to "gcc" by default and is used for compilation only. |
| # LD is set to "gcc" by default and is used for linking only. |
| # ARCH may be useful to force build of 32-bit binary on 64-bit systems |
| # CFLAGS is automatically set for the specified CPU and may be overridden. |
| # LDFLAGS is automatically set to -g and may be overridden. |
| # DEP may be cleared to ignore changes to include files during development |
| # SMALL_OPTS may be used to specify some options to shrink memory usage. |
| # DEBUG may be used to set some internal debugging options. |
| # ERR may be set to non-empty to pass -Werror to the compiler |
| # ADDINC may be used to complete the include path in the form -Ipath. |
| # ADDLIB may be used to complete the library list in the form -Lpath -llib. |
| # DEFINE may be used to specify any additional define, which will be reported |
| # by "haproxy -vv" in CFLAGS. |
| # SILENT_DEFINE may be used to specify other defines which will not be |
| # reported by "haproxy -vv". |
| # EXTRA is used to force building or not building some extra tools. |
| # DESTDIR is not set by default and is used for installation only. |
| # It might be useful to set DESTDIR if you want to install haproxy |
| # in a sandbox. |
| # PREFIX is set to "/usr/local" by default and is used for installation only. |
| # SBINDIR is set to "$(PREFIX)/sbin" by default and is used for installation |
| # only. |
| # MANDIR is set to "$(PREFIX)/share/man" by default and is used for |
| # installation only. |
| # DOCDIR is set to "$(PREFIX)/doc/haproxy" by default and is used for |
| # installation only. |
| # |
| # Other variables : |
| # PCRE_CONFIG : force the binary path to get pcre config (by default |
| # pcre-config) |
| # PCREDIR : force the path to libpcre. |
| # PCRE_LIB : force the lib path to libpcre (defaults to $PCREDIR/lib). |
| # PCRE_INC : force the include path to libpcre ($PCREDIR/inc) |
| # PCRE2_CONFIG : force the binary path to get pcre2 config (by default |
| # pcre2-config) |
| # SSL_LIB : force the lib path to libssl/libcrypto |
| # SSL_INC : force the include path to libssl/libcrypto |
| # LUA_LIB : force the lib path to lua |
| # LUA_INC : force the include path to lua |
| # LUA_LIB_NAME : force the lib name (or automatically evaluated, by order of |
| # priority : lua5.3, lua53, lua). |
| # IGNOREGIT : ignore GIT commit versions if set. |
| # VERSION : force haproxy version reporting. |
| # SUBVERS : add a sub-version (eg: platform, model, ...). |
| # VERDATE : force haproxy's release date. |
| # |
| # VTEST_PROGRAM : location of the vtest program to run reg-tests. |
| |
| # verbosity: pass V=1 for verbose shell invocation |
| V = 0 |
| Q = @ |
| ifeq ($V,1) |
| Q= |
| endif |
| |
| # Function used to detect support of a given option by the compiler. |
| # Usage: CFLAGS += $(call cc-opt,option). Eg: $(call cc-opt,-fwrapv) |
| # Note: ensure the referencing variable is assigned using ":=" and not "=" to |
| # call it only once. |
| cc-opt = $(shell set -e; if $(CC) $(1) -E -xc - -o /dev/null </dev/null >&0 2>&0; then echo "$(1)"; fi;) |
| |
| # same but emits $2 if $1 is not supported |
| cc-opt-alt = $(shell set -e; if $(CC) $(1) -E -xc - -o /dev/null </dev/null >&0 2>&0; then echo "$(1)"; else echo "$(2)"; fi;) |
| |
| # Disable a warning when supported by the compiler. Don't put spaces around the |
| # warning! And don't use cc-opt which doesn't always report an error until |
| # another one is also returned. |
| # Usage: CFLAGS += $(call cc-nowarn,warning). Eg: $(call cc-opt,format-truncation) |
| cc-nowarn = $(shell set -e; if $(CC) -W$(1) -E -xc - -o /dev/null </dev/null >&0 2>&0; then echo "-Wno-$(1)"; fi;) |
| |
| #### Installation options. |
| DESTDIR = |
| PREFIX = /usr/local |
| SBINDIR = $(PREFIX)/sbin |
| MANDIR = $(PREFIX)/share/man |
| DOCDIR = $(PREFIX)/doc/haproxy |
| |
| #### TARGET system |
| # Use TARGET=<target_name> to optimize for a specifc target OS among the |
| # following list (use the default "generic" if uncertain) : |
| # generic, linux22, linux24, linux24e, linux26, solaris, |
| # freebsd, openbsd, netbsd, cygwin, haiku, custom, aix51, aix52 |
| TARGET = |
| |
| #### TARGET CPU |
| # Use CPU=<cpu_name> to optimize for a particular CPU, among the following |
| # list : |
| # generic, native, i586, i686, ultrasparc, custom |
| CPU = generic |
| |
| #### Architecture, used when not building for native architecture |
| # Use ARCH=<arch_name> to force build for a specific architecture. Known |
| # architectures will lead to "-m32" or "-m64" being added to CFLAGS and |
| # LDFLAGS. This can be required to build 32-bit binaries on 64-bit targets. |
| # Currently, only 32, 64, x86_64, i386, i486, i586 and i686 are understood. |
| ARCH = |
| |
| #### Toolchain options. |
| # GCC is normally used both for compiling and linking. |
| CC = gcc |
| LD = $(CC) |
| |
| #### Debug flags (typically "-g"). |
| # Those flags only feed CFLAGS so it is not mandatory to use this form. |
| DEBUG_CFLAGS = -g |
| |
| #### Add -Werror when set to non-empty |
| ERR = |
| |
| #### May be used to force running a specific set of reg-tests |
| REG_TEST_FILES = |
| |
| #### Compiler-specific flags that may be used to disable some negative over- |
| # optimization or to silence some warnings. -fno-strict-aliasing is needed with |
| # gcc >= 4.4. |
| # We rely on signed integer wraparound on overflow, however clang think it |
| # can do whatever it wants since it's an undefined behavior, so use -fwrapv |
| # to be sure we get the intended behavior. |
| SPEC_CFLAGS := -fno-strict-aliasing -Wdeclaration-after-statement |
| SPEC_CFLAGS += $(call cc-opt-alt,-fwrapv,$(call cc-opt,-fno-strict-overflow)) |
| SPEC_CFLAGS += $(call cc-nowarn,format-truncation) |
| SPEC_CFLAGS += $(call cc-nowarn,address-of-packed-member) |
| SPEC_CFLAGS += $(call cc-nowarn,unused-label) |
| SPEC_CFLAGS += $(call cc-nowarn,sign-compare) |
| SPEC_CFLAGS += $(call cc-nowarn,unused-parameter) |
| SPEC_CFLAGS += $(call cc-nowarn,old-style-declaration) |
| SPEC_CFLAGS += $(call cc-nowarn,ignored-qualifiers) |
| SPEC_CFLAGS += $(call cc-nowarn,clobbered) |
| SPEC_CFLAGS += $(call cc-nowarn,missing-field-initializers) |
| SPEC_CFLAGS += $(call cc-nowarn,implicit-fallthrough) |
| SPEC_CFLAGS += $(call cc-nowarn,stringop-overflow) |
| SPEC_CFLAGS += $(call cc-nowarn,cast-function-type) |
| SPEC_CFLAGS += $(call cc-opt,-Wtype-limits) |
| SPEC_CFLAGS += $(call cc-opt,-Wshift-negative-value) |
| SPEC_CFLAGS += $(call cc-opt,-Wshift-overflow=2) |
| SPEC_CFLAGS += $(call cc-opt,-Wduplicated-cond) |
| SPEC_CFLAGS += $(call cc-opt,-Wnull-dereference) |
| |
| #### Memory usage tuning |
| # If small memory footprint is required, you can reduce the buffer size. There |
| # are 2 buffers per concurrent session, so 16 kB buffers will eat 32 MB memory |
| # with 1000 concurrent sessions. Putting it slightly lower than a page size |
| # will prevent the additional parameters to go beyond a page. 8030 bytes is |
| # exactly 5.5 TCP segments of 1460 bytes and is generally good. Useful tuning |
| # macros include : |
| # SYSTEM_MAXCONN, BUFSIZE, MAXREWRITE, REQURI_LEN, CAPTURE_LEN. |
| # Example: SMALL_OPTS = -DBUFSIZE=8030 -DMAXREWRITE=1030 -DSYSTEM_MAXCONN=1024 |
| SMALL_OPTS = |
| |
| #### Debug settings |
| # You can enable debugging on specific code parts by setting DEBUG=-DDEBUG_xxx. |
| # Currently defined DEBUG macros include DEBUG_FULL, DEBUG_MEMORY, DEBUG_FSM, |
| # DEBUG_HASH, DEBUG_AUTH, DEBUG_SPOE, DEBUG_UAF and DEBUG_THREAD. Please check |
| # sources for exact meaning or do not use at all. |
| DEBUG = |
| |
| #### Trace options |
| # Use TRACE=1 to trace function calls to file "trace.out" or to stderr if not |
| # possible. |
| TRACE = |
| |
| #### Additional include and library dirs |
| # Redefine this if you want to add some special PATH to include/libs |
| ADDINC = |
| ADDLIB = |
| |
| #### Specific macro definitions |
| # Use DEFINE=-Dxxx to set any tunable macro. Anything declared here will appear |
| # in the build options reported by "haproxy -vv". Use SILENT_DEFINE if you do |
| # not want to pollute the report with complex defines. |
| # The following settings might be of interest when SSL is enabled : |
| # LISTEN_DEFAULT_CIPHERS is a cipher suite string used to set the default SSL |
| # ciphers on "bind" lines instead of using OpenSSL's defaults. |
| # CONNECT_DEFAULT_CIPHERS is a cipher suite string used to set the default |
| # SSL ciphers on "server" lines instead of using OpenSSL's defaults. |
| DEFINE = |
| SILENT_DEFINE = |
| |
| #### extra programs to build |
| # Force this to enable building extra programs or to disable them. |
| # It's automatically appended depending on the targets. |
| EXTRA = |
| |
| #### CPU dependant optimizations |
| # Some CFLAGS are set by default depending on the target CPU. Those flags only |
| # feed CPU_CFLAGS, which in turn feed CFLAGS, so it is not mandatory to use |
| # them. You should not have to change these options. Better use CPU_CFLAGS or |
| # even CFLAGS instead. |
| CPU_CFLAGS.generic = -O2 |
| CPU_CFLAGS.native = -O2 -march=native |
| CPU_CFLAGS.i586 = -O2 -march=i586 |
| CPU_CFLAGS.i686 = -O2 -march=i686 |
| CPU_CFLAGS.ultrasparc = -O6 -mcpu=v9 -mtune=ultrasparc |
| CPU_CFLAGS = $(CPU_CFLAGS.$(CPU)) |
| |
| #### ARCH dependant flags, may be overridden by CPU flags |
| ARCH_FLAGS.32 = -m32 |
| ARCH_FLAGS.64 = -m64 |
| ARCH_FLAGS.i386 = -m32 -march=i386 |
| ARCH_FLAGS.i486 = -m32 -march=i486 |
| ARCH_FLAGS.i586 = -m32 -march=i586 |
| ARCH_FLAGS.i686 = -m32 -march=i686 |
| ARCH_FLAGS.x86_64 = -m64 -march=x86-64 |
| ARCH_FLAGS = $(ARCH_FLAGS.$(ARCH)) |
| |
| #### Common CFLAGS |
| # These CFLAGS contain general optimization options, CPU-specific optimizations |
| # and debug flags. They may be overridden by some distributions which prefer to |
| # set all of them at once instead of playing with the CPU and DEBUG variables. |
| CFLAGS = $(ARCH_FLAGS) $(CPU_CFLAGS) $(DEBUG_CFLAGS) $(SPEC_CFLAGS) |
| |
| #### Common LDFLAGS |
| # These LDFLAGS are used as the first "ld" options, regardless of any library |
| # path or any other option. They may be changed to add any linker-specific |
| # option at the beginning of the ld command line. |
| LDFLAGS = $(ARCH_FLAGS) -g |
| |
| #### Target system options |
| # Depending on the target platform, some options are set, as well as some |
| # CFLAGS and LDFLAGS. The USE_* values are set to "implicit" so that they are |
| # not reported in the build options string. You should not have to change |
| # anything there. poll() is always supported, unless explicitly disabled by |
| # passing USE_POLL="" on the make command line. |
| USE_POLL = default |
| |
| # Always enable threads support by default and let the Makefile detect if |
| # HAProxy can be compiled with threads or not. |
| |
| ifeq ($(TARGET),generic) |
| # generic system target has nothing specific |
| USE_POLL = implicit |
| USE_TPROXY = implicit |
| else |
| ifeq ($(TARGET),haiku) |
| # For Haiku |
| TARGET_LDFLAGS = -lnetwork |
| USE_POLL = implicit |
| USE_TPROXY = implicit |
| else |
| ifeq ($(TARGET),linux22) |
| # This is for Linux 2.2 |
| USE_POLL = implicit |
| USE_TPROXY = implicit |
| USE_LIBCRYPT = implicit |
| USE_DL = implicit |
| USE_RT = implicit |
| else |
| ifeq ($(TARGET),linux24) |
| # This is for standard Linux 2.4 with netfilter but without epoll() |
| USE_NETFILTER = implicit |
| USE_POLL = implicit |
| USE_TPROXY = implicit |
| USE_CRYPT_H = implicit |
| USE_LIBCRYPT = implicit |
| USE_DL = implicit |
| USE_RT = implicit |
| else |
| ifeq ($(TARGET),linux24e) |
| # This is for enhanced Linux 2.4 with netfilter and epoll() patch > 0.21 |
| USE_NETFILTER = implicit |
| USE_POLL = implicit |
| USE_EPOLL = implicit |
| USE_MY_EPOLL = implicit |
| USE_TPROXY = implicit |
| USE_CRYPT_H = implicit |
| USE_LIBCRYPT = implicit |
| USE_DL = implicit |
| USE_RT = implicit |
| else |
| ifeq ($(TARGET),linux26) |
| # This is for standard Linux 2.6 with netfilter and standard epoll() |
| USE_NETFILTER = implicit |
| USE_POLL = implicit |
| USE_EPOLL = implicit |
| USE_TPROXY = implicit |
| USE_CRYPT_H = implicit |
| USE_LIBCRYPT = implicit |
| USE_FUTEX = implicit |
| USE_DL = implicit |
| USE_RT = implicit |
| else |
| ifeq ($(TARGET),linux2628) |
| # This is for standard Linux >= 2.6.28 with netfilter, epoll, tproxy and splice |
| USE_NETFILTER = implicit |
| USE_POLL = implicit |
| USE_EPOLL = implicit |
| USE_TPROXY = implicit |
| USE_CRYPT_H = implicit |
| USE_LIBCRYPT = implicit |
| USE_LINUX_SPLICE= implicit |
| USE_LINUX_TPROXY= implicit |
| USE_ACCEPT4 = implicit |
| USE_FUTEX = implicit |
| USE_CPU_AFFINITY= implicit |
| ASSUME_SPLICE_WORKS= implicit |
| USE_DL = implicit |
| USE_RT = implicit |
| USE_THREAD = implicit |
| else |
| ifeq ($(TARGET),solaris) |
| # This is for Solaris 8 |
| # We also enable getaddrinfo() which works since solaris 8. |
| USE_POLL = implicit |
| TARGET_CFLAGS = -fomit-frame-pointer -DFD_SETSIZE=65536 -D_REENTRANT -D_XOPEN_SOURCE=500 -D__EXTENSIONS__ |
| TARGET_LDFLAGS = -lnsl -lsocket |
| USE_TPROXY = implicit |
| USE_LIBCRYPT = implicit |
| USE_CRYPT_H = implicit |
| USE_GETADDRINFO = implicit |
| USE_THREAD = implicit |
| else |
| ifeq ($(TARGET),freebsd) |
| # This is for FreeBSD |
| USE_POLL = implicit |
| USE_KQUEUE = implicit |
| USE_TPROXY = implicit |
| USE_LIBCRYPT = implicit |
| USE_THREAD = implicit |
| USE_CPU_AFFINITY= implicit |
| USE_CLOSEFROM = implicit |
| else |
| ifeq ($(TARGET),osx) |
| # This is for Mac OS/X |
| USE_POLL = implicit |
| USE_KQUEUE = implicit |
| USE_TPROXY = implicit |
| EXPORT_SYMBOL = -export_dynamic |
| else |
| ifeq ($(TARGET),openbsd) |
| # This is for OpenBSD >= 5.7 |
| USE_POLL = implicit |
| USE_KQUEUE = implicit |
| USE_TPROXY = implicit |
| USE_ACCEPT4 = implicit |
| USE_THREAD = implicit |
| else |
| ifeq ($(TARGET),netbsd) |
| # This is for NetBSD |
| USE_POLL = implicit |
| USE_KQUEUE = implicit |
| USE_TPROXY = implicit |
| else |
| ifeq ($(TARGET),aix51) |
| # This is for AIX 5.1 |
| USE_POLL = implicit |
| USE_LIBCRYPT = implicit |
| TARGET_CFLAGS = -Dss_family=__ss_family |
| DEBUG_CFLAGS = |
| else |
| ifeq ($(TARGET),aix52) |
| # This is for AIX 5.2 and later |
| USE_POLL = implicit |
| USE_LIBCRYPT = implicit |
| TARGET_CFLAGS = -D_MSGQSUPPORT |
| DEBUG_CFLAGS = |
| else |
| ifeq ($(TARGET),cygwin) |
| # This is for Cygwin |
| # Cygwin adds IPv6 support only in version 1.7 (in beta right now). |
| USE_POLL = implicit |
| USE_TPROXY = implicit |
| TARGET_CFLAGS = $(if $(filter 1.5.%, $(shell uname -r)), -DUSE_IPV6 -DAF_INET6=23 -DINET6_ADDRSTRLEN=46, ) |
| endif # cygwin |
| endif # aix52 |
| endif # aix51 |
| endif # netbsd |
| endif # openbsd |
| endif # osx |
| endif # freebsd |
| endif # solaris |
| endif # linux2628 |
| endif # linux26 |
| endif # linux24e |
| endif # linux24 |
| endif # linux22 |
| endif # haiku |
| endif # generic |
| |
| |
| #### Determine version, sub-version and release date. |
| # If GIT is found, and IGNOREGIT is not set, VERSION, SUBVERS and VERDATE are |
| # extracted from the last commit. Otherwise, use the contents of the files |
| # holding the same names in the current directory. |
| |
| ifeq ($(IGNOREGIT),) |
| VERSION := $(shell [ -d .git/. ] && ref=`(git describe --tags --match 'v*' --abbrev=0) 2>/dev/null` && ref=$${ref%-g*} && echo "$${ref\#v}") |
| ifneq ($(VERSION),) |
| # OK git is there and works. |
| SUBVERS := $(shell comms=`git log --format=oneline --no-merges v$(VERSION).. 2>/dev/null | wc -l | tr -dc '0-9'`; commit=`(git log -1 --pretty=%h --abbrev=6) 2>/dev/null`; [ $$comms -gt 0 ] && echo "-$$commit-$$comms") |
| VERDATE := $(shell git log -1 --pretty=format:%ci | cut -f1 -d' ' | tr '-' '/') |
| endif |
| endif |
| |
| # Last commit version not found, take it from the files. |
| ifeq ($(VERSION),) |
| VERSION := $(shell cat VERSION 2>/dev/null || touch VERSION) |
| endif |
| ifeq ($(SUBVERS),) |
| SUBVERS := $(shell (grep -v '\$$Format' SUBVERS 2>/dev/null || touch SUBVERS) | head -n 1) |
| endif |
| ifeq ($(VERDATE),) |
| VERDATE := $(shell (grep -v '^\$$Format' VERDATE 2>/dev/null || touch VERDATE) | head -n 1 | cut -f1 -d' ' | tr '-' '/') |
| endif |
| |
| #### Build options |
| # Do not change these ones, enable USE_* variables instead. |
| OPTIONS_CFLAGS = |
| OPTIONS_LDFLAGS = |
| OPTIONS_OBJS = |
| |
| #### Extra objects to be built and integrated (used only for development) |
| EXTRA_OBJS = |
| |
| # This variable collects all USE_* values except those set to "implicit". This |
| # is used to report a list of all flags which were used to build this version. |
| # Do not assign anything to it. |
| BUILD_OPTIONS = |
| |
| # Return USE_xxx=$(USE_xxx) unless $(USE_xxx) = "implicit" |
| # Usage: |
| # BUILD_OPTIONS += $(call ignore_implicit,USE_xxx) |
| ignore_implicit = $(patsubst %=implicit,,$(1)=$($(1))) |
| |
| ifneq ($(USE_LINUX_SPLICE),) |
| OPTIONS_CFLAGS += -DCONFIG_HAP_LINUX_SPLICE |
| BUILD_OPTIONS += $(call ignore_implicit,USE_LINUX_SPLICE) |
| endif |
| |
| ifneq ($(USE_TPROXY),) |
| OPTIONS_CFLAGS += -DTPROXY |
| BUILD_OPTIONS += $(call ignore_implicit,USE_TPROXY) |
| endif |
| |
| ifneq ($(USE_LINUX_TPROXY),) |
| OPTIONS_CFLAGS += -DCONFIG_HAP_LINUX_TPROXY |
| BUILD_OPTIONS += $(call ignore_implicit,USE_LINUX_TPROXY) |
| endif |
| |
| ifneq ($(USE_LIBCRYPT),) |
| OPTIONS_CFLAGS += -DCONFIG_HAP_CRYPT |
| BUILD_OPTIONS += $(call ignore_implicit,USE_LIBCRYPT) |
| OPTIONS_LDFLAGS += -lcrypt |
| endif |
| |
| ifneq ($(USE_CRYPT_H),) |
| OPTIONS_CFLAGS += -DNEED_CRYPT_H |
| BUILD_OPTIONS += $(call ignore_implicit,USE_CRYPT_H) |
| endif |
| |
| ifneq ($(USE_GETADDRINFO),) |
| OPTIONS_CFLAGS += -DUSE_GETADDRINFO |
| BUILD_OPTIONS += $(call ignore_implicit,USE_GETADDRINFO) |
| endif |
| |
| ifneq ($(USE_SLZ),) |
| # Use SLZ_INC and SLZ_LIB to force path to zlib.h and libz.{a,so} if needed. |
| SLZ_INC = |
| SLZ_LIB = |
| OPTIONS_CFLAGS += -DUSE_SLZ $(if $(SLZ_INC),-I$(SLZ_INC)) |
| BUILD_OPTIONS += $(call ignore_implicit,USE_SLZ) |
| OPTIONS_LDFLAGS += $(if $(SLZ_LIB),-L$(SLZ_LIB)) -lslz |
| endif |
| |
| ifneq ($(USE_ZLIB),) |
| # Use ZLIB_INC and ZLIB_LIB to force path to zlib.h and libz.{a,so} if needed. |
| ZLIB_INC = |
| ZLIB_LIB = |
| OPTIONS_CFLAGS += -DUSE_ZLIB $(if $(ZLIB_INC),-I$(ZLIB_INC)) |
| BUILD_OPTIONS += $(call ignore_implicit,USE_ZLIB) |
| OPTIONS_LDFLAGS += $(if $(ZLIB_LIB),-L$(ZLIB_LIB)) -lz |
| endif |
| |
| ifneq ($(USE_POLL),) |
| OPTIONS_CFLAGS += -DENABLE_POLL |
| OPTIONS_OBJS += src/ev_poll.o |
| BUILD_OPTIONS += $(call ignore_implicit,USE_POLL) |
| endif |
| |
| ifneq ($(USE_EPOLL),) |
| OPTIONS_CFLAGS += -DENABLE_EPOLL |
| OPTIONS_OBJS += src/ev_epoll.o |
| BUILD_OPTIONS += $(call ignore_implicit,USE_EPOLL) |
| endif |
| |
| ifneq ($(USE_MY_EPOLL),) |
| OPTIONS_CFLAGS += -DUSE_MY_EPOLL |
| BUILD_OPTIONS += $(call ignore_implicit,USE_MY_EPOLL) |
| endif |
| |
| ifneq ($(USE_KQUEUE),) |
| OPTIONS_CFLAGS += -DENABLE_KQUEUE |
| OPTIONS_OBJS += src/ev_kqueue.o |
| BUILD_OPTIONS += $(call ignore_implicit,USE_KQUEUE) |
| endif |
| |
| ifneq ($(USE_VSYSCALL),) |
| OPTIONS_OBJS += src/i386-linux-vsys.o |
| OPTIONS_CFLAGS += -DCONFIG_HAP_LINUX_VSYSCALL |
| BUILD_OPTIONS += $(call ignore_implicit,USE_VSYSCALL) |
| endif |
| |
| ifneq ($(USE_CPU_AFFINITY),) |
| OPTIONS_CFLAGS += -DUSE_CPU_AFFINITY |
| BUILD_OPTIONS += $(call ignore_implicit,USE_CPU_AFFINITY) |
| endif |
| |
| ifneq ($(USE_MY_SPLICE),) |
| OPTIONS_CFLAGS += -DUSE_MY_SPLICE |
| BUILD_OPTIONS += $(call ignore_implicit,USE_MY_SPLICE) |
| endif |
| |
| ifneq ($(ASSUME_SPLICE_WORKS),) |
| OPTIONS_CFLAGS += -DASSUME_SPLICE_WORKS |
| BUILD_OPTIONS += $(call ignore_implicit,ASSUME_SPLICE_WORKS) |
| endif |
| |
| ifneq ($(USE_ACCEPT4),) |
| OPTIONS_CFLAGS += -DUSE_ACCEPT4 |
| BUILD_OPTIONS += $(call ignore_implicit,USE_ACCEPT4) |
| endif |
| |
| ifneq ($(USE_MY_ACCEPT4),) |
| OPTIONS_CFLAGS += -DUSE_MY_ACCEPT4 |
| BUILD_OPTIONS += $(call ignore_implicit,USE_MY_ACCEPT4) |
| endif |
| |
| ifneq ($(USE_NETFILTER),) |
| OPTIONS_CFLAGS += -DNETFILTER |
| BUILD_OPTIONS += $(call ignore_implicit,USE_NETFILTER) |
| endif |
| |
| ifneq ($(USE_REGPARM),) |
| OPTIONS_CFLAGS += -DCONFIG_REGPARM=3 |
| BUILD_OPTIONS += $(call ignore_implicit,USE_REGPARM) |
| endif |
| |
| ifneq ($(USE_DL),) |
| BUILD_OPTIONS += $(call ignore_implicit,USE_DL) |
| OPTIONS_LDFLAGS += -ldl |
| endif |
| |
| ifneq ($(USE_THREAD),) |
| BUILD_OPTIONS += $(call ignore_implicit,USE_THREAD) |
| OPTIONS_CFLAGS += -DUSE_THREAD |
| OPTIONS_LDFLAGS += -lpthread |
| endif |
| |
| ifneq ($(USE_RT),) |
| BUILD_OPTIONS += $(call ignore_implicit,USE_RT) |
| OPTIONS_LDFLAGS += -lrt |
| endif |
| |
| ifneq ($(USE_OPENSSL),) |
| # OpenSSL is packaged in various forms and with various dependencies. |
| # In general -lssl is enough, but on some platforms, -lcrypto may be needed, |
| # reason why it's added by default. Some even need -lz, then you'll need to |
| # pass it in the "ADDLIB" variable if needed. If your SSL libraries are not |
| # in the usual path, use SSL_INC=/path/to/inc and SSL_LIB=/path/to/lib. |
| BUILD_OPTIONS += $(call ignore_implicit,USE_OPENSSL) |
| OPTIONS_CFLAGS += -DUSE_OPENSSL $(if $(SSL_INC),-I$(SSL_INC)) |
| OPTIONS_LDFLAGS += $(if $(SSL_LIB),-L$(SSL_LIB)) -lssl -lcrypto |
| ifneq ($(USE_DL),) |
| OPTIONS_LDFLAGS += -ldl |
| endif |
| OPTIONS_OBJS += src/ssl_sock.o |
| endif |
| |
| # The private cache option affect the way the shctx is built |
| ifneq ($(USE_PRIVATE_CACHE),) |
| OPTIONS_CFLAGS += -DUSE_PRIVATE_CACHE |
| else |
| ifneq ($(USE_PTHREAD_PSHARED),) |
| OPTIONS_CFLAGS += -DUSE_PTHREAD_PSHARED |
| OPTIONS_LDFLAGS += -lpthread |
| else |
| ifneq ($(USE_FUTEX),) |
| OPTIONS_CFLAGS += -DUSE_SYSCALL_FUTEX |
| endif |
| endif |
| endif |
| |
| ifneq ($(USE_CLOSEFROM),) |
| OPTIONS_CFLAGS += -DUSE_CLOSEFROM |
| endif |
| |
| ifneq ($(USE_LUA),) |
| check_lua_lib = $(shell echo "int main(){}" | $(CC) -o /dev/null -x c - $(2) -l$(1) 2>/dev/null && echo $(1)) |
| check_lua_inc = $(shell if [ -d $(2)$(1) ]; then echo $(2)$(1); fi;) |
| |
| BUILD_OPTIONS += $(call ignore_implicit,USE_LUA) |
| OPTIONS_CFLAGS += -DUSE_LUA $(if $(LUA_INC),-I$(LUA_INC)) |
| LUA_LD_FLAGS := -Wl,$(if $(EXPORT_SYMBOL),$(EXPORT_SYMBOL),--export-dynamic) $(if $(LUA_LIB),-L$(LUA_LIB)) |
| ifeq ($(LUA_LIB_NAME),) |
| # Try to automatically detect the Lua library |
| LUA_LIB_NAME := $(firstword $(foreach lib,lua5.3 lua53 lua,$(call check_lua_lib,$(lib),$(LUA_LD_FLAGS)))) |
| ifeq ($(LUA_LIB_NAME),) |
| $(error unable to automatically detect the Lua library name, you can enforce its name with LUA_LIB_NAME=<name> (where <name> can be lua5.3, lua53, lua, ...)) |
| endif |
| LUA_INC := $(firstword $(foreach lib,lua5.3 lua53 lua,$(call check_lua_inc,$(lib),"/usr/include/"))) |
| ifneq ($(LUA_INC),) |
| OPTIONS_CFLAGS += -I$(LUA_INC) |
| endif |
| endif |
| |
| OPTIONS_LDFLAGS += $(LUA_LD_FLAGS) -l$(LUA_LIB_NAME) -lm |
| ifneq ($(USE_DL),) |
| OPTIONS_LDFLAGS += -ldl |
| endif |
| OPTIONS_OBJS += src/hlua.o src/hlua_fcn.o |
| endif |
| |
| ifneq ($(USE_DEVICEATLAS),) |
| ifeq ($(USE_PCRE),) |
| $(error the DeviceAtlas module needs the PCRE library in order to compile) |
| endif |
| # Use DEVICEATLAS_SRC and possibly DEVICEATLAS_INC and DEVICEATLAS_LIB to force path |
| # to DeviceAtlas headers and libraries if needed. |
| DEVICEATLAS_SRC = |
| DEVICEATLAS_INC = $(DEVICEATLAS_SRC) |
| DEVICEATLAS_LIB = $(DEVICEATLAS_SRC) |
| ifeq ($(DEVICEATLAS_SRC),) |
| OPTIONS_LDFLAGS += -lda |
| else |
| OPTIONS_OBJS += $(DEVICEATLAS_LIB)/json.o |
| OPTIONS_OBJS += $(DEVICEATLAS_LIB)/dac.o |
| endif |
| OPTIONS_OBJS += src/da.o |
| OPTIONS_CFLAGS += -DUSE_DEVICEATLAS $(if $(DEVICEATLAS_INC),-I$(DEVICEATLAS_INC)) |
| BUILD_OPTIONS += $(call ignore_implicit,USE_DEVICEATLAS) |
| endif |
| |
| ifneq ($(USE_51DEGREES),) |
| # Use 51DEGREES_SRC and possibly 51DEGREES_INC and 51DEGREES_LIB to force path |
| # to 51degrees headers and libraries if needed. |
| 51DEGREES_SRC = |
| 51DEGREES_INC = $(51DEGREES_SRC) |
| 51DEGREES_LIB = $(51DEGREES_SRC) |
| OPTIONS_OBJS += $(51DEGREES_LIB)/../cityhash/city.o |
| OPTIONS_OBJS += $(51DEGREES_LIB)/51Degrees.o |
| OPTIONS_OBJS += src/51d.o |
| OPTIONS_CFLAGS += -DUSE_51DEGREES $(if $(51DEGREES_INC),-I$(51DEGREES_INC)) |
| ifeq ($(USE_THREAD),) |
| OPTIONS_CFLAGS += -DFIFTYONEDEGREES_NO_THREADING |
| else |
| OPTIONS_OBJS += $(51DEGREES_LIB)/../threading.o |
| endif |
| |
| BUILD_OPTIONS += $(call ignore_implicit,USE_51DEGREES) |
| OPTIONS_LDFLAGS += $(if $(51DEGREES_LIB),-L$(51DEGREES_LIB)) -lm |
| endif |
| |
| ifneq ($(USE_SYSTEMD),) |
| BUILD_OPTIONS += $(call ignore_implicit,USE_SYSTEMD) |
| OPTIONS_CFLAGS += -DUSE_SYSTEMD |
| OPTIONS_LDFLAGS += -lsystemd |
| endif |
| |
| ifneq ($(USE_PCRE)$(USE_STATIC_PCRE)$(USE_PCRE_JIT),) |
| ifneq ($(USE_PCRE2)$(USE_STATIC_PCRE2)$(USE_PCRE2_JIT),) |
| $(error cannot compile both PCRE and PCRE2 support) |
| endif |
| # PCREDIR is used to automatically construct the PCRE_INC and PCRE_LIB paths, |
| # by appending /include and /lib respectively. If your system does not use the |
| # same sub-directories, simply force these variables instead of PCREDIR. It is |
| # automatically detected but can be forced if required (for cross-compiling). |
| # Forcing PCREDIR to an empty string will let the compiler use the default |
| # locations. |
| |
| PCRE_CONFIG := pcre-config |
| PCREDIR := $(shell $(PCRE_CONFIG) --prefix 2>/dev/null || echo /usr/local) |
| ifneq ($(PCREDIR),) |
| PCRE_INC := $(PCREDIR)/include |
| PCRE_LIB := $(PCREDIR)/lib |
| endif |
| |
| ifeq ($(USE_STATIC_PCRE),) |
| # dynamic PCRE |
| OPTIONS_CFLAGS += -DUSE_PCRE $(if $(PCRE_INC),-I$(PCRE_INC)) |
| OPTIONS_LDFLAGS += $(if $(PCRE_LIB),-L$(PCRE_LIB)) -lpcreposix -lpcre |
| BUILD_OPTIONS += $(call ignore_implicit,USE_PCRE) |
| else |
| # static PCRE |
| OPTIONS_CFLAGS += -DUSE_PCRE $(if $(PCRE_INC),-I$(PCRE_INC)) |
| OPTIONS_LDFLAGS += $(if $(PCRE_LIB),-L$(PCRE_LIB)) -Wl,-Bstatic -lpcreposix -lpcre -Wl,-Bdynamic |
| BUILD_OPTIONS += $(call ignore_implicit,USE_STATIC_PCRE) |
| endif |
| # JIT PCRE |
| ifneq ($(USE_PCRE_JIT),) |
| OPTIONS_CFLAGS += -DUSE_PCRE_JIT |
| BUILD_OPTIONS += $(call ignore_implicit,USE_PCRE_JIT) |
| endif |
| endif |
| |
| ifneq ($(USE_PCRE2)$(USE_STATIC_PCRE2)$(USE_PCRE2_JIT),) |
| PCRE2_CONFIG := pcre2-config |
| PCRE2DIR := $(shell $(PCRE2_CONFIG) --prefix 2>/dev/null || echo /usr/local) |
| ifneq ($(PCRE2DIR),) |
| PCRE2_INC := $(PCRE2DIR)/include |
| PCRE2_LIB := $(PCRE2DIR)/lib |
| |
| ifeq ($(PCRE2_WIDTH),) |
| PCRE2_WIDTH = 8 |
| endif |
| |
| ifneq ($(PCRE2_WIDTH),8) |
| ifneq ($(PCRE2_WIDTH),16) |
| ifneq ($(PCRE2_WIDTH),32) |
| $(error PCRE2_WIDTH needs to be set to either 8,16 or 32) |
| endif |
| endif |
| endif |
| |
| |
| PCRE2_LDFLAGS := $(shell $(PCRE2_CONFIG) --libs$(PCRE2_WIDTH) 2>/dev/null || echo -L/usr/local/lib -lpcre2-$(PCRE2_WIDTH)) |
| |
| ifeq ($(PCRE2_LDFLAGS),) |
| $(error libpcre2-$(PCRE2_WIDTH) not found) |
| else |
| ifeq ($(PCRE2_WIDTH),8) |
| PCRE2_LDFLAGS += -lpcre2-posix |
| endif |
| endif |
| |
| OPTIONS_CFLAGS += -DUSE_PCRE2 -DPCRE2_CODE_UNIT_WIDTH=$(PCRE2_WIDTH) |
| OPTIONS_CFLAGS += $(if $(PCRE2_INC), -I$(PCRE2_INC)) |
| |
| ifneq ($(USE_STATIC_PCRE2),) |
| OPTIONS_LDFLAGS += $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -Wl,-Bstatic -L$(PCRE2_LIB) $(PCRE2_LDFLAGS) -Wl,-Bdynamic |
| BUILD_OPTIONS += $(call ignore_implicit,USE_STATIC_PCRE2) |
| else |
| OPTIONS_LDFLAGS += $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -L$(PCRE2_LIB) $(PCRE2_LDFLAGS) |
| BUILD_OPTIONS += $(call ignore_implicit,USE_PCRE2) |
| endif |
| |
| ifneq ($(USE_PCRE2_JIT),) |
| OPTIONS_CFLAGS += -DUSE_PCRE2_JIT |
| BUILD_OPTIONS += $(call ignore_implicit,USE_PCRE2_JIT) |
| endif |
| |
| endif |
| endif |
| |
| # TCP Fast Open |
| ifneq ($(USE_TFO),) |
| OPTIONS_CFLAGS += -DUSE_TFO |
| BUILD_OPTIONS += $(call ignore_implicit,USE_TFO) |
| endif |
| |
| # This one can be changed to look for ebtree files in an external directory |
| EBTREE_DIR := ebtree |
| |
| #### Global compile options |
| VERBOSE_CFLAGS = $(CFLAGS) $(TARGET_CFLAGS) $(SMALL_OPTS) $(DEFINE) |
| COPTS = -Iinclude -I$(EBTREE_DIR) -Wall -Wextra |
| |
| ifneq ($(ERR),) |
| COPTS += -Werror |
| endif |
| |
| COPTS += $(CFLAGS) $(TARGET_CFLAGS) $(SMALL_OPTS) $(DEFINE) $(SILENT_DEFINE) |
| COPTS += $(DEBUG) $(OPTIONS_CFLAGS) $(ADDINC) |
| |
| ifneq ($(VERSION)$(SUBVERS),) |
| COPTS += -DCONFIG_HAPROXY_VERSION=\"$(VERSION)$(SUBVERS)\" |
| endif |
| |
| ifneq ($(VERDATE),) |
| COPTS += -DCONFIG_HAPROXY_DATE=\"$(VERDATE)\" |
| endif |
| |
| ifneq ($(TRACE),) |
| # if tracing is enabled, we want it to be as fast as possible |
| TRACE_COPTS := $(filter-out -O0 -O1 -O2 -pg -finstrument-functions,$(COPTS)) -O3 -fomit-frame-pointer |
| COPTS += -finstrument-functions |
| endif |
| |
| ifneq ($(USE_NS),) |
| OPTIONS_CFLAGS += -DCONFIG_HAP_NS |
| BUILD_OPTIONS += $(call ignore_implicit,USE_NS) |
| OPTIONS_OBJS += src/namespace.o |
| endif |
| |
| #### Global link options |
| # These options are added at the end of the "ld" command line. Use LDFLAGS to |
| # add options at the beginning of the "ld" command line if needed. |
| LDOPTS = $(TARGET_LDFLAGS) $(OPTIONS_LDFLAGS) $(ADDLIB) |
| |
| ifeq ($V,1) |
| cmd_CC = $(CC) |
| cmd_LD = $(LD) |
| cmd_AR = $(AR) |
| else |
| cmd_CC = $(Q)echo " CC $@";$(CC) |
| cmd_LD = $(Q)echo " LD $@";$(LD) |
| cmd_AR = $(Q)echo " AR $@";$(AR) |
| endif |
| |
| ifeq ($(TARGET),) |
| all: |
| @echo |
| @echo "Due to too many reports of suboptimized setups, building without" |
| @echo "specifying the target is no longer supported. Please specify the" |
| @echo "target OS in the TARGET variable, in the following form:" |
| @echo |
| @echo " $ make TARGET=xxx" |
| @echo |
| @echo "Please choose the target among the following supported list :" |
| @echo |
| @echo " linux2628, linux26, linux24, linux24e, linux22, solaris," |
| @echo " freebsd, netbsd, osx, openbsd, aix51, aix52, cygwin, haiku," |
| @echo " generic, custom" |
| @echo |
| @echo "Use \"generic\" if you don't want any optimization, \"custom\" if you" |
| @echo "want to precisely tweak every option, or choose the target which" |
| @echo "matches your OS the most in order to gain the maximum performance" |
| @echo "out of it. Please check the Makefile in case of doubts." |
| @echo |
| @exit 1 |
| else |
| all: haproxy $(EXTRA) |
| endif |
| |
| OBJS = src/proto_http.o src/cfgparse-listen.o src/proto_htx.o src/stream.o \ |
| src/mux_h2.o src/stats.o src/flt_spoe.o src/server.o src/checks.o \ |
| src/haproxy.o src/cfgparse.o src/flt_http_comp.o src/http_fetch.o \ |
| src/dns.o src/stick_table.o src/mux_h1.o src/peers.o src/standard.o \ |
| src/proxy.o src/cli.o src/log.o src/backend.o src/pattern.o \ |
| src/sample.o src/stream_interface.o src/proto_tcp.o src/listener.o \ |
| src/h1.o src/cfgparse-global.o src/cache.o src/http_rules.o \ |
| src/http_act.o src/tcp_rules.o src/filters.o src/connection.o \ |
| src/session.o src/acl.o src/vars.o src/raw_sock.o src/map.o \ |
| src/proto_uxst.o src/payload.o src/fd.o src/queue.o src/flt_trace.o \ |
| src/task.o src/lb_chash.o src/frontend.o src/applet.o src/mux_pt.o \ |
| src/signal.o src/ev_select.o src/proto_sockpair.o src/compression.o \ |
| src/http_conv.o src/memory.o src/lb_fwrr.o src/channel.o src/htx.o \ |
| src/uri_auth.o src/regex.o src/chunk.o src/pipe.o src/lb_fas.o \ |
| src/lb_map.o src/lb_fwlc.o src/auth.o src/time.o src/hathreads.o \ |
| src/http_htx.o src/buffer.o src/hpack-tbl.o src/shctx.o src/sha1.o \ |
| src/http.o src/hpack-dec.o src/action.o src/proto_udp.o src/http_acl.o \ |
| src/xxhash.o src/hpack-enc.o src/h2.o src/freq_ctr.o src/lru.o \ |
| src/protocol.o src/arg.o src/hpack-huff.o src/hdr_idx.o src/base64.o \ |
| src/hash.o src/mailers.o src/activity.o src/http_msg.o src/version.o |
| |
| EBTREE_OBJS = $(EBTREE_DIR)/ebtree.o $(EBTREE_DIR)/eb32sctree.o \ |
| $(EBTREE_DIR)/eb32tree.o $(EBTREE_DIR)/eb64tree.o \ |
| $(EBTREE_DIR)/ebmbtree.o $(EBTREE_DIR)/ebsttree.o \ |
| $(EBTREE_DIR)/ebimtree.o $(EBTREE_DIR)/ebistree.o |
| |
| ifneq ($(TRACE),) |
| OBJS += src/trace.o |
| endif |
| |
| ifneq ($(EXTRA_OBJS),) |
| OBJS += $(EXTRA_OBJS) |
| endif |
| |
| # Not used right now |
| LIB_EBTREE = $(EBTREE_DIR)/libebtree.a |
| |
| # Used only for forced dependency checking. May be cleared during development. |
| INCLUDES = $(wildcard include/*/*.h ebtree/*.h) |
| DEP = $(INCLUDES) .build_opts |
| |
| help: |
| $(Q)sed -ne "/^[^#]*$$/q;s/^#\(.*\)/\1/p" Makefile |
| |
| # Used only to force a rebuild if some build options change |
| .build_opts: $(shell rm -f .build_opts.new; echo \'$(TARGET) $(BUILD_OPTIONS) $(VERBOSE_CFLAGS)\' > .build_opts.new; if cmp -s .build_opts .build_opts.new; then rm -f .build_opts.new; else mv -f .build_opts.new .build_opts; fi) |
| |
| haproxy: $(OPTIONS_OBJS) $(OBJS) $(EBTREE_OBJS) |
| $(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS) |
| |
| $(LIB_EBTREE): $(EBTREE_OBJS) |
| $(cmd_AR) rv $@ $^ |
| |
| objsize: haproxy |
| $(Q)objdump -t $^|grep ' g '|grep -F '.text'|awk '{print $$5 FS $$6}'|sort |
| |
| %.o: %.c $(DEP) |
| $(cmd_CC) $(COPTS) -c -o $@ $< |
| |
| # rebuild it every time |
| .PHONY: src/version.c |
| |
| src/trace.o: src/trace.c $(DEP) |
| $(cmd_CC) $(TRACE_COPTS) -c -o $@ $< |
| |
| src/haproxy.o: src/haproxy.c $(DEP) |
| $(cmd_CC) $(COPTS) \ |
| -DBUILD_TARGET='"$(strip $(TARGET))"' \ |
| -DBUILD_ARCH='"$(strip $(ARCH))"' \ |
| -DBUILD_CPU='"$(strip $(CPU))"' \ |
| -DBUILD_CC='"$(strip $(CC))"' \ |
| -DBUILD_CFLAGS='"$(strip $(VERBOSE_CFLAGS))"' \ |
| -DBUILD_OPTIONS='"$(strip $(BUILD_OPTIONS))"' \ |
| -c -o $@ $< |
| |
| install-man: |
| $(Q)install -v -d "$(DESTDIR)$(MANDIR)"/man1 |
| $(Q)install -v -m 644 doc/haproxy.1 "$(DESTDIR)$(MANDIR)"/man1 |
| |
| EXCLUDE_DOCUMENTATION = lgpl gpl coding-style |
| DOCUMENTATION = $(filter-out $(EXCLUDE_DOCUMENTATION),$(patsubst doc/%.txt,%,$(wildcard doc/*.txt))) |
| |
| install-doc: |
| $(Q)install -v -d "$(DESTDIR)$(DOCDIR)" |
| $(Q)for x in $(DOCUMENTATION); do \ |
| install -v -m 644 doc/$$x.txt "$(DESTDIR)$(DOCDIR)" ; \ |
| done |
| |
| install-bin: |
| $(Q)for i in haproxy $(EXTRA); do \ |
| if ! [ -e "$$i" ]; then \ |
| echo "Please run 'make' before 'make install'."; \ |
| exit 1; \ |
| fi; \ |
| done |
| $(Q)install -v -d "$(DESTDIR)$(SBINDIR)" |
| $(Q)install -v haproxy $(EXTRA) "$(DESTDIR)$(SBINDIR)" |
| |
| install: install-bin install-man install-doc |
| |
| uninstall: |
| $(Q)rm -f "$(DESTDIR)$(MANDIR)"/man1/haproxy.1 |
| $(Q)for x in $(DOCUMENTATION); do \ |
| rm -f "$(DESTDIR)$(DOCDIR)"/$$x.txt ; \ |
| done |
| $(Q)-rmdir "$(DESTDIR)$(DOCDIR)" |
| $(Q)rm -f "$(DESTDIR)$(SBINDIR)"/haproxy |
| |
| clean: |
| $(Q)rm -f *.[oas] src/*.[oas] ebtree/*.[oas] haproxy test .build_opts .build_opts.new |
| $(Q)for dir in . src include/* doc ebtree; do rm -f $$dir/*~ $$dir/*.rej $$dir/core; done |
| $(Q)rm -f haproxy-$(VERSION).tar.gz haproxy-$(VERSION)$(SUBVERS).tar.gz |
| $(Q)rm -f haproxy-$(VERSION) haproxy-$(VERSION)$(SUBVERS) nohup.out gmon.out |
| |
| tags: |
| $(Q)find src include \( -name '*.c' -o -name '*.h' \) -print0 | \ |
| xargs -0 etags --declarations --members |
| |
| cscope: |
| $(Q)find src include -name "*.[ch]" -print | cscope -q -b -i - |
| |
| tar: clean |
| $(Q)ln -s . haproxy-$(VERSION)$(SUBVERS) |
| $(Q)tar --exclude=haproxy-$(VERSION)$(SUBVERS)/.git \ |
| --exclude=haproxy-$(VERSION)$(SUBVERS)/haproxy-$(VERSION)$(SUBVERS) \ |
| --exclude=haproxy-$(VERSION)$(SUBVERS)/haproxy-$(VERSION)$(SUBVERS).tar.gz \ |
| -cf - haproxy-$(VERSION)$(SUBVERS)/* | gzip -c9 >haproxy-$(VERSION)$(SUBVERS).tar.gz |
| $(Q)echo haproxy-$(VERSION)$(SUBVERS).tar.gz |
| $(Q)rm -f haproxy-$(VERSION)$(SUBVERS) |
| |
| git-tar: |
| $(Q)git archive --format=tar --prefix="haproxy-$(VERSION)$(SUBVERS)/" HEAD | gzip -9 > haproxy-$(VERSION)$(SUBVERS).tar.gz |
| $(Q)echo haproxy-$(VERSION)$(SUBVERS).tar.gz |
| |
| version: |
| @echo "VERSION: $(VERSION)" |
| @echo "SUBVERS: $(SUBVERS)" |
| @echo "VERDATE: $(VERDATE)" |
| |
| # never use this one if you don't know what it is used for. |
| update-version: |
| @echo "Ready to update the following versions :" |
| @echo "VERSION: $(VERSION)" |
| @echo "SUBVERS: $(SUBVERS)" |
| @echo "VERDATE: $(VERDATE)" |
| @echo "Press [ENTER] to continue or Ctrl-C to abort now.";read |
| echo "$(VERSION)" > VERSION |
| echo "$(SUBVERS)" > SUBVERS |
| echo "$(VERDATE)" > VERDATE |
| |
| # just display the build options |
| opts: |
| @echo -n 'Using: ' |
| @echo -n 'TARGET="$(strip $(TARGET))" ' |
| @echo -n 'ARCH="$(strip $(ARCH))" ' |
| @echo -n 'CPU="$(strip $(CPU))" ' |
| @echo -n 'CC="$(strip $(CC))" ' |
| @echo -n 'ARCH_FLAGS="$(strip $(ARCH_FLAGS))" ' |
| @echo -n 'CPU_CFLAGS="$(strip $(CPU_CFLAGS))" ' |
| @echo -n 'DEBUG_CFLAGS="$(strip $(DEBUG_CFLAGS))" ' |
| @echo "$(strip $(BUILD_OPTIONS))" |
| @echo 'COPTS="$(strip $(COPTS))"' |
| @echo 'LDFLAGS="$(strip $(LDFLAGS))"' |
| @echo 'LDOPTS="$(strip $(LDOPTS))"' |
| @echo 'OPTIONS_OBJS="$(strip $(OPTIONS_OBJS))"' |
| @echo 'OBJS="$(strip $(OBJS))"' |
| |
| ifeq (reg-tests, $(firstword $(MAKECMDGOALS))) |
| REGTEST_ARGS := $(wordlist 2, $(words $(MAKECMDGOALS)), $(MAKECMDGOALS)) |
| $(eval $(REGTEST_ARGS):;@true) |
| endif |
| |
| # Target to run the regression testing script files. |
| reg-tests: |
| $(Q)./scripts/run-regtests.sh --LEVEL "$(LEVEL)" $(REGTEST_ARGS) $(REG_TEST_FILES) |
| .PHONY: $(REGTEST_ARGS) |
| |
| reg-tests-help: |
| @echo |
| @echo "To launch the reg tests for haproxy, first export to your environment VTEST_PROGRAM variable to point to your vtest program:" |
| @echo " $$ export VTEST_PROGRAM=/opt/local/bin/vtest" |
| @echo "or" |
| @echo " $$ setenv VTEST_PROGRAM /opt/local/bin/vtest" |
| @echo |
| @echo "The same thing may be done to set your haproxy program with HAPROXY_PROGRAM but with ./haproxy as default value." |
| @echo |
| @echo "To run all the tests:" |
| @echo " $$ make reg-tests" |
| @echo |
| @echo "You can also set the programs to be used on the command line:" |
| @echo " $$ VTEST_PROGRAM=<...> HAPROXY_PROGRAM=<...> make reg-tests" |
| @echo |
| @echo "To run tests with specific levels:" |
| @echo " $$ LEVEL=1,3,4 make reg-tests #list of levels" |
| @echo " $$ LEVEL=1-3,5-6 make reg-tests #list of range of levels" |
| @echo |
| @echo "About the levels:" |
| @echo " LEVEL 1 scripts are dedicated to pure haproxy compliance tests (prefixed with 'h' letter)." |
| @echo " LEVEL 2 scripts are slow scripts (prefixed with 's' letter)." |
| @echo " LEVEL 3 scripts are low interest scripts (prefixed with 'l' letter)." |
| @echo " LEVEL 4 scripts are in relation with bugs they help to reproduce (prefixed with 'b' letter)." |
| @echo " LEVEL 5 scripts are scripts triggering known broken behaviors for which there is still no fix (prefixed with 'k' letter)." |
| @echo " LEVEL 6 scripts are experimental, typically used to develop new scripts (prefixed with 'e' lettre)." |
| |
| .PHONY: reg-tests reg-tests-help |