| # This is a test configuration. |
| # It exercises some critical state machine transitions. Start it in debug |
| # mode with syslogd listening to UDP socket, facility local0. |
| |
| ########### test#0001: process_cli(), read or write error |
| # setup : |
| # server = (printf "HTTP/1.0 200 OK\r\n\r\n";cat /dev/zero) | nc -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\n\r\n";cat) | nc 127.1 8001 >/dev/null |
| # action : kill client during transfer (Ctrl-C) |
| # result : both sides must close, and logs must report "CD" flags with |
| # valid timers and counters. (note: high CPU usage expected) |
| # example: 0/0/3/0/5293 200 76420076 - - CD-- |
| |
| ########### test#0002: process_cli(), read closed on client side first |
| # setup : |
| # server = (printf "HTTP/1.0 200 OK\r\n\r\n";cat /dev/zero) | nc -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\n\r\n";cat) | nc 127.1 8001 |
| # action : end client output during transfer (Ctrl-D) |
| # result : client exits, log is emitted immediately, server must be terminated |
| # by hand. Logs indicate "----" with correct timers. |
| # example: 0/0/3/0/5293 200 76420076 - - ---- |
| # note : test#0003 is triggered immediately after this test |
| |
| ########### test3: process_cli(), read closed on server side first |
| # setup : |
| # server = (printf "HTTP/1.0 200 OK\r\n\r\n";cat) | nc -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\n\r\n";cat) | nc 127.1 8001 |
| # action : end server output during transfer (Ctrl-D) |
| # result : server exits, log is emitted immediately, client must be terminated |
| # by hand. Logs indicate "----" with correct timers. |
| # example: 0/0/3/0/5293 200 76420076 - - ---- |
| # note : test#0002 is triggered immediately after this test |
| |
| ########### test4: process_cli(), read timeout on client side |
| # setup : |
| # server = (printf "HTTP/1.0 200 OK\r\n\r\n";cat) | nc -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\n\r\n";cat) | nc 127.1 8001 |
| # action : wait at least 7 seconds and check the logs |
| # result : log is emitted immediately, client and server must be terminated |
| # by hand. Logs indicate "cD--" with correct timers. |
| # example: 0/0/1/0/7006 200 19 - - cD-- |
| # note : test#0003 is triggered immediately after this test |
| |
| ########### test5: ability to restart read after a request buffer full |
| # setup : |
| # server = (printf "HTTP/1.0 200 OK\r\n\r\n"; cat) | nc -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\n\r\n";cat 8k.txt;cat) | nc 127.1 8001 |
| # action : enter data on the client, press enter, then Ctrl-D |
| # result : data transferred to the server, client exits, log is emitted |
| # immediately, server must be terminated by hand. Logs indicate |
| # "----" with correct timers. |
| # example: 0/0/0/0/3772 200 19 - - ---- |
| |
| ########### test6: ability to restart read after a request buffer partially full |
| # setup : |
| # server = (printf "HTTP/1.0 200 OK\r\n\r\n"; cat) | nc -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\n\r\n";cat 7k.txt;cat) | nc 127.1 8001 |
| # action : enter data on the client, press enter, then Ctrl-D |
| # result : data transferred to the server, client exits, log is emitted |
| # immediately, server must be terminated by hand. Logs indicate |
| # "----" with correct timers. |
| # example: 0/0/0/0/3772 200 19 - - ---- |
| |
| ########### test7: ability to restart read after a response buffer full |
| # setup : |
| # server = (printf "HTTP/1.0 200 OK\r\n\r\n";cat 8k.txt; cat) | nc -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\n\r\n";cat) | nc 127.1 8001 |
| # action : enter data on the server, press enter, then Ctrl-D |
| # result : data transferred to the client, server exits, log is emitted |
| # immediately, client must be terminated by hand. Logs indicate |
| # "----" with correct timers. |
| # example: 0/0/0/0/3087 200 8242 - - ---- |
| |
| ########### test8: ability to restart read after a response buffer partially full |
| # setup : |
| # server = (printf "HTTP/1.0 200 OK\r\n\r\n";cat 7k.txt; cat) | nc -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\n\r\n";cat) | nc 127.1 8001 |
| # action : enter data on the server, press enter, then Ctrl-D |
| # result : data transferred to the client, server exits, log is emitted |
| # immediately, client must be terminated by hand. Logs indicate |
| # "----" with correct timers. |
| # example: 0/0/0/0/5412 200 7213 - - ---- |
| |
| ########### test9: process_cli(), read timeout on empty request |
| # setup : |
| # server = (printf "HTTP/1.0 200 OK\r\n\r\n";cat) | nc -lp4000 |
| # client = nc 127.1 8001 |
| # action : wait at least 5 seconds and check the logs |
| # result : client returns 408, log is emitted immediately, server must be |
| # terminated by hand. Logs indicate "cR--" with correct timers |
| # and "<BADREQ>" |
| # example: -1/-1/-1/-1/5000 408 212 - - cR-- |
| |
| ########### test10: process_cli(), read timeout on client headers |
| # setup : |
| # server = (printf "HTTP/1.0 200 OK\r\n\r\n";cat) | nc -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\nTest: test\r\n";cat) | nc 127.1 8001 |
| # action : wait at least 5 seconds and check the logs |
| # result : client returns 408, log is emitted immediately, both must be |
| # terminated by hand. Logs indicate "cR--" with correct timers |
| # and "<BADREQ>" |
| # example: -1/-1/-1/-1/5004 408 212 - - cR-- |
| |
| ########### test11: process_cli(), read abort on empty request |
| # setup : |
| # server = (printf "HTTP/1.0 200 OK\r\n\r\n";cat) | nc -lp4000 |
| # client = echo -n | nc 127.1 8001 |
| # action : just check the logs after the client immediately returns |
| # result : client returns 400, log is emitted immediately, server must be |
| # terminated by hand. Logs indicate "CR--" with correct timers |
| # and "<BADREQ>" |
| # example: -1/-1/-1/-1/0 400 187 - - CR-- |
| |
| ########### test12: process_cli(), read abort on client headers |
| # setup : |
| # server = (printf "HTTP/1.0 200 OK\r\n\r\n";cat) | nc -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\nTest: test\r\n") | nc 127.1 8001 |
| # action : just check the logs after the client immediately returns |
| # result : client returns 400, log is emitted immediately, server must be |
| # terminated by hand. Logs indicate "CR--" with correct timers |
| # and "<BADREQ>" |
| # example: -1/-1/-1/-1/0 400 187 - - CR-- |
| |
| ########### test13: process_srv(), read timeout on empty response |
| # setup : |
| # server = nc -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\n\r\n"; cat) | nc 127.1 8001 |
| # action : wait 9 seconds and check response |
| # result : client exits with 504, log is emitted immediately, client must be |
| # terminated by hand. Logs indicate "sH--" with correct timers. |
| # example: 0/0/0/-1/8002 504 194 - - sH-- |
| |
| ########### test14: process_srv(), closed client during response timeout |
| # setup : |
| # server = nc6 --half-close -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\n\r\n"; sleep 1) | nc 127.1 8001 |
| # action : wait 9 seconds and check response |
| # result : client exits with 504, log is emitted immediately, server must be |
| # terminated by hand. Logs indicate "sH--" with correct timers, which |
| # is 9s total (sleep 1 + 8 for server response). |
| # example: 0/0/0/-1/9002 504 194 - - sH-- |
| |
| ########### test15: process_srv(), client close causing server close |
| # setup : |
| # server = nc6 -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\n\r\n"; sleep 1) | nc 127.1 8001 |
| # action : wait 1 second and check response |
| # result : client exits with 502, log is emitted immediately, server closes. |
| # Logs indicate "SH--" with correct timers. |
| # example: 0/0/0/-1/1002 502 204 - - SH-- |
| |
| ########### test16: process_srv(), read timeout on server headers |
| # setup : |
| # server = (printf "HTTP/1.0 200 OK\r\nTest: test\r\n";cat) | nc -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\n\r\n"; cat) | nc 127.1 8001 |
| # action : wait 8 seconds and check response |
| # result : client exits with 504, log is emitted immediately, both must be |
| # terminated by hand. Logs indicate "sH--" with correct timers. |
| # example: 0/0/0/-1/8004 504 223 - - sH-- |
| |
| ########### test17: process_srv(), connection time-out |
| # setup : |
| # config = retries 1 |
| # server = none |
| # client = (printf "GET / HTTP/1.0\r\n\r\n";cat) | nc 127.1 8002 |
| # action : wait at least 12 seconds and check the logs |
| # result : client returns 503 and must be terminated by hand. Log is emitted |
| # immediately. Logs indicate "sC--" with correct timers. |
| # example: 0/6001/-1/-1/12001 503 212 - - sC-- |
| |
| ########### test18: process_srv(), client close during connection time-out |
| # setup : |
| # config = retries 1 |
| # server = none |
| # client = (printf "GET / HTTP/1.0\r\n\r\n";sleep 1) | nc 127.1 8002 |
| # action : wait at least 12 seconds and check the logs |
| # result : client returns 503 and automatically closes. Log is emitted |
| # immediately. Logs indicate "sC--" with correct timers. |
| # example: 0/6001/-1/-1/12001 503 212 - - sC-- |
| |
| ########### test19: process_srv(), immediate server close after empty response |
| # setup : |
| # server = echo -n | nc -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\n\r\n") | nc 127.1 8001 |
| # action : just check logs after immediate return. |
| # result : client and server exit with 502, log is emitted immediately. Logs |
| # indicate "SH--" with correct timers. |
| # example: 0/0/0/-1/0 502 204 - - SH-- |
| |
| ########### test20: process_srv(), immediate server close after incomplete headers |
| # setup : |
| # server = (printf "HTTP/1.0 200 OK\r\nTest: test\r\n") | nc -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\n\r\n") | nc 127.1 8001 |
| # action : just check logs after immediate return. |
| # result : client and server exit with 502, log is emitted immediately. Logs |
| # indicate "SH--" with correct timers. |
| # example: 0/0/0/-1/0 502 233 - - SH-- |
| |
| ########### test21: process_srv(), immediate server close after complete headers |
| # setup : |
| # server = (printf "HTTP/1.0 200 OK\r\nTest: test\r\n\r\n") | nc -lp4000 |
| # client = (printf "GET / HTTP/1.0\r\n\r\n") | nc 127.1 8001 |
| # action : just check logs after immediate return. |
| # result : client and server exit with 200, log is emitted immediately. Logs |
| # indicate "----" with correct timers. |
| # example: 0/0/0/0/0 200 31 - - ---- |
| |
| ########### test22: process_srv(), timeout on request body |
| # setup : |
| # server = (printf "HTTP/1.0 200 OK\r\nTest: test\r\n\r\n") | nc -lp4000 |
| # client = (printf "POST / HTTP/1.0\r\nContent-length: 20\r\n\r\n";cat) | nc 127.1 8001 |
| # action : wait 5s for the request body to timeout. |
| # result : The server receives the request and responds immediately with 200. |
| # Log is emitted immediately. Logs indicate "----" with correct timers. |
| # example: 5002/0/0/0/5002 200 31 - - ---- |
| |
| |
| |
| global |
| maxconn 100 |
| log 127.0.0.1 local0 |
| debug |
| |
| # connect to port 8000 to consult statistics |
| listen stats |
| timeout client 5s |
| mode http |
| bind :8000 |
| balance |
| stats uri /stat |
| |
| # connect port 8001 to localhost:4000 |
| listen frt8001 |
| log global |
| bind :8001 |
| mode http |
| option httplog |
| maxconn 100 |
| |
| timeout http-request 5s |
| timeout connect 6s |
| timeout client 7s |
| timeout server 8s |
| timeout queue 9s |
| |
| balance url_param foo check_post |
| server srv4000 127.0.0.1:4000 |
| |
| # connect port 8002 to nowhere |
| listen frt8002 |
| log global |
| bind :8002 |
| mode http |
| option httplog |
| maxconn 100 |
| |
| timeout http-request 5s |
| timeout connect 6s |
| timeout client 7s |
| timeout server 8s |
| timeout queue 9s |
| retries 1 |
| |
| balance url_param foo check_post |
| server srv4000 192.168.255.255:4000 |
| |
| |
| # listen frt8002 |
| # log global |
| # bind :8002 |
| # mode http |
| # option httplog |
| # maxconn 100 |
| # |
| # timeout http-request 5s |
| # timeout connect 6s |
| # timeout client 7s |
| # timeout server 8s |
| # timeout queue 9s |
| # |
| # #tcp-request inspect-delay 4s |
| # acl white_list src 127.0.0.2 |
| # |
| # tcp-request content accept if white_list |
| # tcp-request content reject if !REQ_CONTENT |
| # |
| # balance url_param foo check_post |
| # #balance url_param foo #check_post |
| # server srv4000 127.0.0.1:4000 |
| # |
| # # control activity this way |
| # stats uri /stat |
| # |