| /* |
| * Listener management functions. |
| * |
| * Copyright 2000-2013 Willy Tarreau <w@1wt.eu> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| |
| #include <ctype.h> |
| #include <errno.h> |
| #include <stdio.h> |
| #include <string.h> |
| #include <unistd.h> |
| |
| #include <haproxy/acl.h> |
| #include <haproxy/api.h> |
| #include <haproxy/activity.h> |
| #include <haproxy/cfgparse.h> |
| #include <haproxy/cli-t.h> |
| #include <haproxy/connection.h> |
| #include <haproxy/errors.h> |
| #include <haproxy/fd.h> |
| #include <haproxy/freq_ctr.h> |
| #include <haproxy/global.h> |
| #include <haproxy/list.h> |
| #include <haproxy/listener.h> |
| #include <haproxy/log.h> |
| #include <haproxy/protocol.h> |
| #include <haproxy/proxy.h> |
| #include <haproxy/sample.h> |
| #include <haproxy/stream.h> |
| #include <haproxy/task.h> |
| #include <haproxy/ticks.h> |
| #include <haproxy/tools.h> |
| |
| |
| /* List head of all known bind keywords */ |
| struct bind_kw_list bind_keywords = { |
| .list = LIST_HEAD_INIT(bind_keywords.list) |
| }; |
| |
| /* list of the temporarily limited listeners because of lack of resource */ |
| static struct mt_list global_listener_queue = MT_LIST_HEAD_INIT(global_listener_queue); |
| static struct task *global_listener_queue_task; |
| |
| /* listener status for stats */ |
| const char* li_status_st[LI_STATE_COUNT] = { |
| [LI_STATUS_WAITING] = "WAITING", |
| [LI_STATUS_OPEN] = "OPEN", |
| [LI_STATUS_FULL] = "FULL", |
| }; |
| |
| #if defined(USE_THREAD) |
| |
| struct accept_queue_ring accept_queue_rings[MAX_THREADS] __attribute__((aligned(64))) = { }; |
| |
| /* dequeue and process a pending connection from the local accept queue (single |
| * consumer). Returns the accepted connection or NULL if none was found. |
| */ |
| struct connection *accept_queue_pop_sc(struct accept_queue_ring *ring) |
| { |
| unsigned int pos, next; |
| struct connection *ptr; |
| struct connection **e; |
| |
| pos = ring->head; |
| |
| if (pos == ring->tail) |
| return NULL; |
| |
| next = pos + 1; |
| if (next >= ACCEPT_QUEUE_SIZE) |
| next = 0; |
| |
| e = &ring->entry[pos]; |
| |
| /* wait for the producer to update the listener's pointer */ |
| while (1) { |
| ptr = *e; |
| __ha_barrier_load(); |
| if (ptr) |
| break; |
| pl_cpu_relax(); |
| } |
| |
| /* release the entry */ |
| *e = NULL; |
| |
| __ha_barrier_store(); |
| ring->head = next; |
| return ptr; |
| } |
| |
| |
| /* tries to push a new accepted connection <conn> into ring <ring>. Returns |
| * non-zero if it succeeds, or zero if the ring is full. Supports multiple |
| * producers. |
| */ |
| int accept_queue_push_mp(struct accept_queue_ring *ring, struct connection *conn) |
| { |
| unsigned int pos, next; |
| |
| pos = ring->tail; |
| do { |
| next = pos + 1; |
| if (next >= ACCEPT_QUEUE_SIZE) |
| next = 0; |
| if (next == ring->head) |
| return 0; // ring full |
| } while (unlikely(!_HA_ATOMIC_CAS(&ring->tail, &pos, next))); |
| |
| ring->entry[pos] = conn; |
| __ha_barrier_store(); |
| return 1; |
| } |
| |
| /* proceed with accepting new connections. Don't mark it static so that it appears |
| * in task dumps. |
| */ |
| struct task *accept_queue_process(struct task *t, void *context, unsigned int state) |
| { |
| struct accept_queue_ring *ring = context; |
| struct connection *conn; |
| struct listener *li; |
| unsigned int max_accept; |
| int ret; |
| |
| /* if global.tune.maxaccept is -1, then max_accept is UINT_MAX. It |
| * is not really illimited, but it is probably enough. |
| */ |
| max_accept = global.tune.maxaccept ? global.tune.maxaccept : MAX_ACCEPT; |
| for (; max_accept; max_accept--) { |
| conn = accept_queue_pop_sc(ring); |
| if (!conn) |
| break; |
| |
| li = __objt_listener(conn->target); |
| _HA_ATOMIC_INC(&li->thr_conn[tid]); |
| ret = li->accept(conn); |
| if (ret <= 0) { |
| /* connection was terminated by the application */ |
| continue; |
| } |
| |
| /* increase the per-process number of cumulated sessions, this |
| * may only be done once l->accept() has accepted the connection. |
| */ |
| if (!(li->options & LI_O_UNLIMITED)) { |
| HA_ATOMIC_UPDATE_MAX(&global.sps_max, |
| update_freq_ctr(&global.sess_per_sec, 1)); |
| if (li->bind_conf && li->bind_conf->is_ssl) { |
| HA_ATOMIC_UPDATE_MAX(&global.ssl_max, |
| update_freq_ctr(&global.ssl_per_sec, 1)); |
| } |
| } |
| } |
| |
| /* ran out of budget ? Let's come here ASAP */ |
| if (!max_accept) |
| tasklet_wakeup(ring->tasklet); |
| |
| return NULL; |
| } |
| |
| /* Initializes the accept-queues. Returns 0 on success, otherwise ERR_* flags */ |
| static int accept_queue_init() |
| { |
| struct tasklet *t; |
| int i; |
| |
| for (i = 0; i < global.nbthread; i++) { |
| t = tasklet_new(); |
| if (!t) { |
| ha_alert("Out of memory while initializing accept queue for thread %d\n", i); |
| return ERR_FATAL|ERR_ABORT; |
| } |
| t->tid = i; |
| t->process = accept_queue_process; |
| t->context = &accept_queue_rings[i]; |
| accept_queue_rings[i].tasklet = t; |
| } |
| return 0; |
| } |
| |
| REGISTER_CONFIG_POSTPARSER("multi-threaded accept queue", accept_queue_init); |
| |
| static void accept_queue_deinit() |
| { |
| int i; |
| |
| for (i = 0; i < global.nbthread; i++) { |
| if (accept_queue_rings[i].tasklet) |
| tasklet_free(accept_queue_rings[i].tasklet); |
| } |
| } |
| |
| REGISTER_POST_DEINIT(accept_queue_deinit); |
| |
| #endif // USE_THREAD |
| |
| /* Memory allocation and initialization of the per_thr field. |
| * Returns 0 if the field has been successfully initialized, -1 on failure. |
| */ |
| int li_init_per_thr(struct listener *li) |
| { |
| int i; |
| |
| /* allocate per-thread elements for listener */ |
| li->per_thr = calloc(global.nbthread, sizeof(*li->per_thr)); |
| if (!li->per_thr) |
| return -1; |
| |
| for (i = 0; i < global.nbthread; ++i) { |
| MT_LIST_INIT(&li->per_thr[i].quic_accept.list); |
| MT_LIST_INIT(&li->per_thr[i].quic_accept.conns); |
| |
| li->per_thr[i].li = li; |
| } |
| |
| return 0; |
| } |
| |
| /* helper to get listener status for stats */ |
| enum li_status get_li_status(struct listener *l) |
| { |
| if (!l->maxconn || l->nbconn < l->maxconn) { |
| if (l->state == LI_LIMITED) |
| return LI_STATUS_WAITING; |
| else |
| return LI_STATUS_OPEN; |
| } |
| return LI_STATUS_FULL; |
| } |
| |
| /* adjust the listener's state and its proxy's listener counters if needed. |
| * It must be called under the listener's lock, but uses atomic ops to change |
| * the proxy's counters so that the proxy lock is not needed. |
| */ |
| void listener_set_state(struct listener *l, enum li_state st) |
| { |
| struct proxy *px = l->bind_conf->frontend; |
| |
| if (px) { |
| /* from state */ |
| switch (l->state) { |
| case LI_NEW: /* first call */ |
| _HA_ATOMIC_INC(&px->li_all); |
| break; |
| case LI_INIT: |
| case LI_ASSIGNED: |
| break; |
| case LI_PAUSED: |
| _HA_ATOMIC_DEC(&px->li_paused); |
| break; |
| case LI_LISTEN: |
| _HA_ATOMIC_DEC(&px->li_bound); |
| break; |
| case LI_READY: |
| case LI_FULL: |
| case LI_LIMITED: |
| _HA_ATOMIC_DEC(&px->li_ready); |
| break; |
| } |
| |
| /* to state */ |
| switch (st) { |
| case LI_NEW: |
| case LI_INIT: |
| case LI_ASSIGNED: |
| break; |
| case LI_PAUSED: |
| BUG_ON(l->rx.fd == -1); |
| _HA_ATOMIC_INC(&px->li_paused); |
| break; |
| case LI_LISTEN: |
| BUG_ON(l->rx.fd == -1); |
| _HA_ATOMIC_INC(&px->li_bound); |
| break; |
| case LI_READY: |
| case LI_FULL: |
| case LI_LIMITED: |
| BUG_ON(l->rx.fd == -1); |
| _HA_ATOMIC_INC(&px->li_ready); |
| break; |
| } |
| } |
| l->state = st; |
| } |
| |
| /* This function adds the specified listener's file descriptor to the polling |
| * lists if it is in the LI_LISTEN state. The listener enters LI_READY or |
| * LI_FULL state depending on its number of connections. In daemon mode, we |
| * also support binding only the relevant processes to their respective |
| * listeners. We don't do that in debug mode however. |
| */ |
| void enable_listener(struct listener *listener) |
| { |
| HA_RWLOCK_WRLOCK(LISTENER_LOCK, &listener->lock); |
| |
| /* If this listener is supposed to be only in the master, close it in |
| * the workers. Conversely, if it's supposed to be only in the workers |
| * close it in the master. |
| */ |
| if (!!master != !!(listener->rx.flags & RX_F_MWORKER)) |
| do_unbind_listener(listener); |
| |
| if (listener->state == LI_LISTEN) { |
| BUG_ON(listener->rx.fd == -1); |
| if ((global.mode & (MODE_DAEMON | MODE_MWORKER)) && |
| (!!master != !!(listener->rx.flags & RX_F_MWORKER))) { |
| /* we don't want to enable this listener and don't |
| * want any fd event to reach it. |
| */ |
| do_unbind_listener(listener); |
| } |
| else if (!listener->maxconn || listener->nbconn < listener->maxconn) { |
| listener->rx.proto->enable(listener); |
| listener_set_state(listener, LI_READY); |
| } |
| else { |
| listener_set_state(listener, LI_FULL); |
| } |
| } |
| |
| HA_RWLOCK_WRUNLOCK(LISTENER_LOCK, &listener->lock); |
| } |
| |
| /* |
| * This function completely stops a listener. It will need to operate under the |
| * proxy's lock, the protocol's lock, and the listener's lock. The caller is |
| * responsible for indicating in lpx, lpr, lli whether the respective locks are |
| * already held (non-zero) or not (zero) so that the function picks the missing |
| * ones, in this order. The proxy's listeners count is updated and the proxy is |
| * disabled and woken up after the last one is gone. |
| */ |
| void stop_listener(struct listener *l, int lpx, int lpr, int lli) |
| { |
| struct proxy *px = l->bind_conf->frontend; |
| |
| if (l->options & LI_O_NOSTOP) { |
| /* master-worker sockpairs are never closed but don't count as a |
| * job. |
| */ |
| return; |
| } |
| |
| if (!lpx) |
| HA_RWLOCK_WRLOCK(PROXY_LOCK, &px->lock); |
| |
| if (!lpr) |
| HA_SPIN_LOCK(PROTO_LOCK, &proto_lock); |
| |
| if (!lli) |
| HA_RWLOCK_WRLOCK(LISTENER_LOCK, &l->lock); |
| |
| if (l->state > LI_INIT) { |
| do_unbind_listener(l); |
| |
| if (l->state >= LI_ASSIGNED) |
| __delete_listener(l); |
| |
| proxy_cond_disable(px); |
| } |
| |
| if (!lli) |
| HA_RWLOCK_WRUNLOCK(LISTENER_LOCK, &l->lock); |
| |
| if (!lpr) |
| HA_SPIN_UNLOCK(PROTO_LOCK, &proto_lock); |
| |
| if (!lpx) |
| HA_RWLOCK_WRUNLOCK(PROXY_LOCK, &px->lock); |
| } |
| |
| /* This function adds the specified <listener> to the protocol <proto>. It |
| * does nothing if the protocol was already added. The listener's state is |
| * automatically updated from LI_INIT to LI_ASSIGNED. The number of listeners |
| * for the protocol is updated. This must be called with the proto lock held. |
| */ |
| void default_add_listener(struct protocol *proto, struct listener *listener) |
| { |
| if (listener->state != LI_INIT) |
| return; |
| listener_set_state(listener, LI_ASSIGNED); |
| listener->rx.proto = proto; |
| LIST_APPEND(&proto->receivers, &listener->rx.proto_list); |
| proto->nb_receivers++; |
| } |
| |
| /* default function called to suspend a listener: it simply passes the call to |
| * the underlying receiver. This is find for most socket-based protocols. This |
| * must be called under the listener's lock. It will return non-zero on success, |
| * 0 on failure. If no receiver-level suspend is provided, the operation is |
| * assumed to succeed. |
| */ |
| int default_suspend_listener(struct listener *l) |
| { |
| int ret = 1; |
| |
| if (!l->rx.proto->rx_suspend) |
| return 1; |
| |
| ret = l->rx.proto->rx_suspend(&l->rx); |
| return ret > 0 ? ret : 0; |
| } |
| |
| |
| /* Tries to resume a suspended listener, and returns non-zero on success or |
| * zero on failure. On certain errors, an alert or a warning might be displayed. |
| * It must be called with the listener's lock held. Depending on the listener's |
| * state and protocol, a listen() call might be used to resume operations, or a |
| * call to the receiver's resume() function might be used as well. This is |
| * suitable as a default function for TCP and UDP. This must be called with the |
| * listener's lock held. |
| */ |
| int default_resume_listener(struct listener *l) |
| { |
| int ret = 1; |
| |
| if (l->state == LI_ASSIGNED) { |
| char msg[100]; |
| int err; |
| |
| err = l->rx.proto->listen(l, msg, sizeof(msg)); |
| if (err & ERR_ALERT) |
| ha_alert("Resuming listener: %s\n", msg); |
| else if (err & ERR_WARN) |
| ha_warning("Resuming listener: %s\n", msg); |
| |
| if (err & (ERR_FATAL | ERR_ABORT)) { |
| ret = 0; |
| goto end; |
| } |
| } |
| |
| if (l->state < LI_PAUSED) { |
| ret = 0; |
| goto end; |
| } |
| |
| if (l->state == LI_PAUSED && l->rx.proto->rx_resume && |
| l->rx.proto->rx_resume(&l->rx) <= 0) |
| ret = 0; |
| end: |
| return ret; |
| } |
| |
| |
| /* This function tries to temporarily disable a listener, depending on the OS |
| * capabilities. Linux unbinds the listen socket after a SHUT_RD, and ignores |
| * SHUT_WR. Solaris refuses either shutdown(). OpenBSD ignores SHUT_RD but |
| * closes upon SHUT_WR and refuses to rebind. So a common validation path |
| * involves SHUT_WR && listen && SHUT_RD. In case of success, the FD's polling |
| * is disabled. It normally returns non-zero, unless an error is reported. |
| */ |
| int pause_listener(struct listener *l) |
| { |
| struct proxy *px = l->bind_conf->frontend; |
| int ret = 1; |
| |
| HA_RWLOCK_WRLOCK(LISTENER_LOCK, &l->lock); |
| |
| if (l->state <= LI_PAUSED) |
| goto end; |
| |
| if (l->rx.proto->suspend) |
| ret = l->rx.proto->suspend(l); |
| |
| MT_LIST_DELETE(&l->wait_queue); |
| |
| listener_set_state(l, LI_PAUSED); |
| |
| if (px && !px->li_ready) { |
| ha_warning("Paused %s %s.\n", proxy_cap_str(px->cap), px->id); |
| send_log(px, LOG_WARNING, "Paused %s %s.\n", proxy_cap_str(px->cap), px->id); |
| } |
| end: |
| HA_RWLOCK_WRUNLOCK(LISTENER_LOCK, &l->lock); |
| return ret; |
| } |
| |
| /* This function tries to resume a temporarily disabled listener. Paused, full, |
| * limited and disabled listeners are handled, which means that this function |
| * may replace enable_listener(). The resulting state will either be LI_READY |
| * or LI_FULL. 0 is returned in case of failure to resume (eg: dead socket). |
| * Listeners bound to a different process are not woken up unless we're in |
| * foreground mode, and are ignored. If the listener was only in the assigned |
| * state, it's totally rebound. This can happen if a pause() has completely |
| * stopped it. If the resume fails, 0 is returned and an error might be |
| * displayed. |
| */ |
| int resume_listener(struct listener *l) |
| { |
| struct proxy *px = l->bind_conf->frontend; |
| int was_paused = px && px->li_paused; |
| int ret = 1; |
| |
| HA_RWLOCK_WRLOCK(LISTENER_LOCK, &l->lock); |
| |
| /* check that another thread didn't to the job in parallel (e.g. at the |
| * end of listen_accept() while we'd come from dequeue_all_listeners(). |
| */ |
| if (MT_LIST_INLIST(&l->wait_queue)) |
| goto end; |
| |
| if (l->state == LI_READY) |
| goto end; |
| |
| if (l->rx.proto->resume) |
| ret = l->rx.proto->resume(l); |
| |
| if (l->maxconn && l->nbconn >= l->maxconn) { |
| l->rx.proto->disable(l); |
| listener_set_state(l, LI_FULL); |
| goto done; |
| } |
| |
| l->rx.proto->enable(l); |
| listener_set_state(l, LI_READY); |
| |
| done: |
| if (was_paused && !px->li_paused) { |
| ha_warning("Resumed %s %s.\n", proxy_cap_str(px->cap), px->id); |
| send_log(px, LOG_WARNING, "Resumed %s %s.\n", proxy_cap_str(px->cap), px->id); |
| } |
| end: |
| HA_RWLOCK_WRUNLOCK(LISTENER_LOCK, &l->lock); |
| return ret; |
| } |
| |
| /* Marks a ready listener as full so that the stream code tries to re-enable |
| * it upon next close() using resume_listener(). |
| */ |
| static void listener_full(struct listener *l) |
| { |
| HA_RWLOCK_WRLOCK(LISTENER_LOCK, &l->lock); |
| if (l->state >= LI_READY) { |
| MT_LIST_DELETE(&l->wait_queue); |
| if (l->state != LI_FULL) { |
| l->rx.proto->disable(l); |
| listener_set_state(l, LI_FULL); |
| } |
| } |
| HA_RWLOCK_WRUNLOCK(LISTENER_LOCK, &l->lock); |
| } |
| |
| /* Marks a ready listener as limited so that we only try to re-enable it when |
| * resources are free again. It will be queued into the specified queue. |
| */ |
| static void limit_listener(struct listener *l, struct mt_list *list) |
| { |
| HA_RWLOCK_WRLOCK(LISTENER_LOCK, &l->lock); |
| if (l->state == LI_READY) { |
| MT_LIST_TRY_APPEND(list, &l->wait_queue); |
| l->rx.proto->disable(l); |
| listener_set_state(l, LI_LIMITED); |
| } |
| HA_RWLOCK_WRUNLOCK(LISTENER_LOCK, &l->lock); |
| } |
| |
| /* Dequeues all listeners waiting for a resource the global wait queue */ |
| void dequeue_all_listeners() |
| { |
| struct listener *listener; |
| |
| while ((listener = MT_LIST_POP(&global_listener_queue, struct listener *, wait_queue))) { |
| /* This cannot fail because the listeners are by definition in |
| * the LI_LIMITED state. |
| */ |
| resume_listener(listener); |
| } |
| } |
| |
| /* Dequeues all listeners waiting for a resource in proxy <px>'s queue */ |
| void dequeue_proxy_listeners(struct proxy *px) |
| { |
| struct listener *listener; |
| |
| while ((listener = MT_LIST_POP(&px->listener_queue, struct listener *, wait_queue))) { |
| /* This cannot fail because the listeners are by definition in |
| * the LI_LIMITED state. |
| */ |
| resume_listener(listener); |
| } |
| } |
| |
| |
| /* default function used to unbind a listener. This is for use by standard |
| * protocols working on top of accepted sockets. The receiver's rx_unbind() |
| * will automatically be used after the listener is disabled if the socket is |
| * still bound. This must be used under the listener's lock. |
| */ |
| void default_unbind_listener(struct listener *listener) |
| { |
| if (listener->state <= LI_ASSIGNED) |
| goto out_close; |
| |
| if (listener->rx.fd == -1) { |
| listener_set_state(listener, LI_ASSIGNED); |
| goto out_close; |
| } |
| |
| if (listener->state >= LI_READY) { |
| listener->rx.proto->disable(listener); |
| if (listener->rx.flags & RX_F_BOUND) |
| listener_set_state(listener, LI_LISTEN); |
| } |
| |
| out_close: |
| if (listener->rx.flags & RX_F_BOUND) |
| listener->rx.proto->rx_unbind(&listener->rx); |
| } |
| |
| /* This function closes the listening socket for the specified listener, |
| * provided that it's already in a listening state. The protocol's unbind() |
| * is called to put the listener into LI_ASSIGNED or LI_LISTEN and handle |
| * the unbinding tasks. The listener enters then the LI_ASSIGNED state if |
| * the receiver is unbound. Must be called with the lock held. |
| */ |
| void do_unbind_listener(struct listener *listener) |
| { |
| MT_LIST_DELETE(&listener->wait_queue); |
| |
| if (listener->rx.proto->unbind) |
| listener->rx.proto->unbind(listener); |
| |
| /* we may have to downgrade the listener if the rx was closed */ |
| if (!(listener->rx.flags & RX_F_BOUND) && listener->state > LI_ASSIGNED) |
| listener_set_state(listener, LI_ASSIGNED); |
| } |
| |
| /* This function closes the listening socket for the specified listener, |
| * provided that it's already in a listening state. The listener enters the |
| * LI_ASSIGNED state, except if the FD is not closed, in which case it may |
| * remain in LI_LISTEN. This function is intended to be used as a generic |
| * function for standard protocols. |
| */ |
| void unbind_listener(struct listener *listener) |
| { |
| HA_RWLOCK_WRLOCK(LISTENER_LOCK, &listener->lock); |
| do_unbind_listener(listener); |
| HA_RWLOCK_WRUNLOCK(LISTENER_LOCK, &listener->lock); |
| } |
| |
| /* creates one or multiple listeners for bind_conf <bc> on sockaddr <ss> on port |
| * range <portl> to <porth>, and possibly attached to fd <fd> (or -1 for auto |
| * allocation). The address family is taken from ss->ss_family, and the protocol |
| * passed in <proto> must be usable on this family. The protocol's default iocb |
| * is automatically preset as the receivers' iocb. The number of jobs and |
| * listeners is automatically increased by the number of listeners created. It |
| * returns non-zero on success, zero on error with the error message set in <err>. |
| */ |
| int create_listeners(struct bind_conf *bc, const struct sockaddr_storage *ss, |
| int portl, int porth, int fd, struct protocol *proto, char **err) |
| { |
| struct listener *l; |
| int port; |
| |
| for (port = portl; port <= porth; port++) { |
| l = calloc(1, sizeof(*l)); |
| if (!l) { |
| memprintf(err, "out of memory"); |
| return 0; |
| } |
| l->obj_type = OBJ_TYPE_LISTENER; |
| LIST_APPEND(&bc->frontend->conf.listeners, &l->by_fe); |
| LIST_APPEND(&bc->listeners, &l->by_bind); |
| l->bind_conf = bc; |
| l->rx.settings = &bc->settings; |
| l->rx.owner = l; |
| l->rx.iocb = proto->default_iocb; |
| l->rx.fd = fd; |
| |
| memcpy(&l->rx.addr, ss, sizeof(*ss)); |
| if (proto->fam->set_port) |
| proto->fam->set_port(&l->rx.addr, port); |
| |
| MT_LIST_INIT(&l->wait_queue); |
| listener_set_state(l, LI_INIT); |
| |
| proto->add(proto, l); |
| |
| if (fd != -1) |
| l->rx.flags |= RX_F_INHERITED; |
| |
| l->extra_counters = NULL; |
| |
| HA_RWLOCK_INIT(&l->lock); |
| _HA_ATOMIC_INC(&jobs); |
| _HA_ATOMIC_INC(&listeners); |
| } |
| return 1; |
| } |
| |
| /* clones listener <src> and returns the new one. All dynamically allocated |
| * fields are reallocated (name for now). The new listener is inserted before |
| * the original one in the bind_conf and frontend lists. This allows it to be |
| * duplicated while iterating over the current list. The original listener must |
| * only be in the INIT or ASSIGNED states, and the new listener will only be |
| * placed into the INIT state. The counters are always set to NULL. Maxsock is |
| * updated. Returns NULL on allocation error. |
| */ |
| struct listener *clone_listener(struct listener *src) |
| { |
| struct listener *l; |
| |
| l = calloc(1, sizeof(*l)); |
| if (!l) |
| goto oom1; |
| memcpy(l, src, sizeof(*l)); |
| |
| if (l->name) { |
| l->name = strdup(l->name); |
| if (!l->name) |
| goto oom2; |
| } |
| |
| l->rx.owner = l; |
| l->state = LI_INIT; |
| l->counters = NULL; |
| l->extra_counters = NULL; |
| |
| LIST_APPEND(&src->by_fe, &l->by_fe); |
| LIST_APPEND(&src->by_bind, &l->by_bind); |
| |
| MT_LIST_INIT(&l->wait_queue); |
| |
| l->rx.proto->add(l->rx.proto, l); |
| |
| HA_RWLOCK_INIT(&l->lock); |
| _HA_ATOMIC_INC(&jobs); |
| _HA_ATOMIC_INC(&listeners); |
| global.maxsock++; |
| return l; |
| |
| oom2: |
| free(l); |
| oom1: |
| return NULL; |
| } |
| |
| /* Delete a listener from its protocol's list of listeners. The listener's |
| * state is automatically updated from LI_ASSIGNED to LI_INIT. The protocol's |
| * number of listeners is updated, as well as the global number of listeners |
| * and jobs. Note that the listener must have previously been unbound. This |
| * is a low-level function expected to be called with the proto_lock and the |
| * listener's lock held. |
| */ |
| void __delete_listener(struct listener *listener) |
| { |
| if (listener->state == LI_ASSIGNED) { |
| listener_set_state(listener, LI_INIT); |
| LIST_DELETE(&listener->rx.proto_list); |
| listener->rx.proto->nb_receivers--; |
| _HA_ATOMIC_DEC(&jobs); |
| _HA_ATOMIC_DEC(&listeners); |
| } |
| } |
| |
| /* Delete a listener from its protocol's list of listeners (please check |
| * __delete_listener() above). The proto_lock and the listener's lock will |
| * be grabbed in this order. |
| */ |
| void delete_listener(struct listener *listener) |
| { |
| HA_SPIN_LOCK(PROTO_LOCK, &proto_lock); |
| HA_RWLOCK_WRLOCK(LISTENER_LOCK, &listener->lock); |
| __delete_listener(listener); |
| HA_RWLOCK_WRUNLOCK(LISTENER_LOCK, &listener->lock); |
| HA_SPIN_UNLOCK(PROTO_LOCK, &proto_lock); |
| } |
| |
| /* Returns a suitable value for a listener's backlog. It uses the listener's, |
| * otherwise the frontend's backlog, otherwise the listener's maxconn, |
| * otherwise the frontend's maxconn, otherwise 1024. |
| */ |
| int listener_backlog(const struct listener *l) |
| { |
| if (l->backlog) |
| return l->backlog; |
| |
| if (l->bind_conf->frontend->backlog) |
| return l->bind_conf->frontend->backlog; |
| |
| if (l->maxconn) |
| return l->maxconn; |
| |
| if (l->bind_conf->frontend->maxconn) |
| return l->bind_conf->frontend->maxconn; |
| |
| return 1024; |
| } |
| |
| /* This function is called on a read event from a listening socket, corresponding |
| * to an accept. It tries to accept as many connections as possible, and for each |
| * calls the listener's accept handler (generally the frontend's accept handler). |
| */ |
| void listener_accept(struct listener *l) |
| { |
| struct connection *cli_conn; |
| struct proxy *p; |
| unsigned int max_accept; |
| int next_conn = 0; |
| int next_feconn = 0; |
| int next_actconn = 0; |
| int expire; |
| int ret; |
| |
| p = l->bind_conf->frontend; |
| |
| /* if l->maxaccept is -1, then max_accept is UINT_MAX. It is not really |
| * illimited, but it is probably enough. |
| */ |
| max_accept = l->maxaccept ? l->maxaccept : 1; |
| |
| if (!(l->options & LI_O_UNLIMITED) && global.sps_lim) { |
| int max = freq_ctr_remain(&global.sess_per_sec, global.sps_lim, 0); |
| |
| if (unlikely(!max)) { |
| /* frontend accept rate limit was reached */ |
| expire = tick_add(now_ms, next_event_delay(&global.sess_per_sec, global.sps_lim, 0)); |
| goto limit_global; |
| } |
| |
| if (max_accept > max) |
| max_accept = max; |
| } |
| |
| if (!(l->options & LI_O_UNLIMITED) && global.cps_lim) { |
| int max = freq_ctr_remain(&global.conn_per_sec, global.cps_lim, 0); |
| |
| if (unlikely(!max)) { |
| /* frontend accept rate limit was reached */ |
| expire = tick_add(now_ms, next_event_delay(&global.conn_per_sec, global.cps_lim, 0)); |
| goto limit_global; |
| } |
| |
| if (max_accept > max) |
| max_accept = max; |
| } |
| #ifdef USE_OPENSSL |
| if (!(l->options & LI_O_UNLIMITED) && global.ssl_lim && l->bind_conf && l->bind_conf->is_ssl) { |
| int max = freq_ctr_remain(&global.ssl_per_sec, global.ssl_lim, 0); |
| |
| if (unlikely(!max)) { |
| /* frontend accept rate limit was reached */ |
| expire = tick_add(now_ms, next_event_delay(&global.ssl_per_sec, global.ssl_lim, 0)); |
| goto limit_global; |
| } |
| |
| if (max_accept > max) |
| max_accept = max; |
| } |
| #endif |
| if (p && p->fe_sps_lim) { |
| int max = freq_ctr_remain(&p->fe_sess_per_sec, p->fe_sps_lim, 0); |
| |
| if (unlikely(!max)) { |
| /* frontend accept rate limit was reached */ |
| expire = tick_add(now_ms, next_event_delay(&p->fe_sess_per_sec, p->fe_sps_lim, 0)); |
| goto limit_proxy; |
| } |
| |
| if (max_accept > max) |
| max_accept = max; |
| } |
| |
| /* Note: if we fail to allocate a connection because of configured |
| * limits, we'll schedule a new attempt worst 1 second later in the |
| * worst case. If we fail due to system limits or temporary resource |
| * shortage, we try again 100ms later in the worst case. |
| */ |
| for (; max_accept; next_conn = next_feconn = next_actconn = 0, max_accept--) { |
| unsigned int count; |
| int status; |
| __decl_thread(unsigned long mask); |
| |
| /* pre-increase the number of connections without going too far. |
| * We process the listener, then the proxy, then the process. |
| * We know which ones to unroll based on the next_xxx value. |
| */ |
| do { |
| count = l->nbconn; |
| if (unlikely(l->maxconn && count >= l->maxconn)) { |
| /* the listener was marked full or another |
| * thread is going to do it. |
| */ |
| next_conn = 0; |
| listener_full(l); |
| goto end; |
| } |
| next_conn = count + 1; |
| } while (!_HA_ATOMIC_CAS(&l->nbconn, (int *)(&count), next_conn)); |
| |
| if (p) { |
| do { |
| count = p->feconn; |
| if (unlikely(count >= p->maxconn)) { |
| /* the frontend was marked full or another |
| * thread is going to do it. |
| */ |
| next_feconn = 0; |
| expire = TICK_ETERNITY; |
| goto limit_proxy; |
| } |
| next_feconn = count + 1; |
| } while (!_HA_ATOMIC_CAS(&p->feconn, &count, next_feconn)); |
| } |
| |
| if (!(l->options & LI_O_UNLIMITED)) { |
| do { |
| count = actconn; |
| if (unlikely(count >= global.maxconn)) { |
| /* the process was marked full or another |
| * thread is going to do it. |
| */ |
| next_actconn = 0; |
| expire = tick_add(now_ms, 1000); /* try again in 1 second */ |
| goto limit_global; |
| } |
| next_actconn = count + 1; |
| } while (!_HA_ATOMIC_CAS(&actconn, (int *)(&count), next_actconn)); |
| } |
| |
| /* be careful below, the listener might be shutting down in |
| * another thread on error and we must not dereference its |
| * FD without a bit of protection. |
| */ |
| cli_conn = NULL; |
| status = CO_AC_PERMERR; |
| |
| HA_RWLOCK_RDLOCK(LISTENER_LOCK, &l->lock); |
| if (l->rx.flags & RX_F_BOUND) |
| cli_conn = l->rx.proto->accept_conn(l, &status); |
| HA_RWLOCK_RDUNLOCK(LISTENER_LOCK, &l->lock); |
| |
| if (!cli_conn) { |
| switch (status) { |
| case CO_AC_DONE: |
| goto end; |
| |
| case CO_AC_RETRY: /* likely a signal */ |
| _HA_ATOMIC_DEC(&l->nbconn); |
| if (p) |
| _HA_ATOMIC_DEC(&p->feconn); |
| if (!(l->options & LI_O_UNLIMITED)) |
| _HA_ATOMIC_DEC(&actconn); |
| continue; |
| |
| case CO_AC_YIELD: |
| max_accept = 0; |
| goto end; |
| |
| default: |
| goto transient_error; |
| } |
| } |
| |
| /* The connection was accepted, it must be counted as such */ |
| if (l->counters) |
| HA_ATOMIC_UPDATE_MAX(&l->counters->conn_max, next_conn); |
| |
| if (p) |
| HA_ATOMIC_UPDATE_MAX(&p->fe_counters.conn_max, next_feconn); |
| |
| proxy_inc_fe_conn_ctr(l, p); |
| |
| if (!(l->options & LI_O_UNLIMITED)) { |
| count = update_freq_ctr(&global.conn_per_sec, 1); |
| HA_ATOMIC_UPDATE_MAX(&global.cps_max, count); |
| } |
| |
| _HA_ATOMIC_INC(&activity[tid].accepted); |
| |
| /* past this point, l->accept() will automatically decrement |
| * l->nbconn, feconn and actconn once done. Setting next_*conn=0 |
| * allows the error path not to rollback on nbconn. It's more |
| * convenient than duplicating all exit labels. |
| */ |
| next_conn = 0; |
| next_feconn = 0; |
| next_actconn = 0; |
| |
| |
| #if defined(USE_THREAD) |
| if (l->rx.flags & RX_F_LOCAL_ACCEPT) |
| goto local_accept; |
| |
| mask = thread_mask(l->rx.bind_thread) & all_threads_mask; |
| if (atleast2(mask) && (global.tune.options & GTUNE_LISTENER_MQ) && !stopping) { |
| struct accept_queue_ring *ring; |
| unsigned int t, t0, t1, t2; |
| |
| /* The principle is that we have two running indexes, |
| * each visiting in turn all threads bound to this |
| * listener. The connection will be assigned to the one |
| * with the least connections, and the other one will |
| * be updated. This provides a good fairness on short |
| * connections (round robin) and on long ones (conn |
| * count), without ever missing any idle thread. |
| */ |
| |
| /* keep a copy for the final update. thr_idx is composite |
| * and made of (t2<<16) + t1. |
| */ |
| t0 = l->thr_idx; |
| do { |
| unsigned long m1, m2; |
| int q1, q2; |
| |
| t2 = t1 = t0; |
| t2 >>= 16; |
| t1 &= 0xFFFF; |
| |
| /* t1 walks low to high bits ; |
| * t2 walks high to low. |
| */ |
| m1 = mask >> t1; |
| m2 = mask & (t2 ? nbits(t2 + 1) : ~0UL); |
| |
| if (unlikely(!(m1 & 1))) { |
| m1 &= ~1UL; |
| if (!m1) { |
| m1 = mask; |
| t1 = 0; |
| } |
| t1 += my_ffsl(m1) - 1; |
| } |
| |
| if (unlikely(!(m2 & (1UL << t2)) || t1 == t2)) { |
| /* highest bit not set */ |
| if (!m2) |
| m2 = mask; |
| |
| t2 = my_flsl(m2) - 1; |
| } |
| |
| /* now we have two distinct thread IDs belonging to the mask */ |
| q1 = accept_queue_rings[t1].tail - accept_queue_rings[t1].head + ACCEPT_QUEUE_SIZE; |
| if (q1 >= ACCEPT_QUEUE_SIZE) |
| q1 -= ACCEPT_QUEUE_SIZE; |
| |
| q2 = accept_queue_rings[t2].tail - accept_queue_rings[t2].head + ACCEPT_QUEUE_SIZE; |
| if (q2 >= ACCEPT_QUEUE_SIZE) |
| q2 -= ACCEPT_QUEUE_SIZE; |
| |
| /* we have 3 possibilities now : |
| * q1 < q2 : t1 is less loaded than t2, so we pick it |
| * and update t2 (since t1 might still be |
| * lower than another thread) |
| * q1 > q2 : t2 is less loaded than t1, so we pick it |
| * and update t1 (since t2 might still be |
| * lower than another thread) |
| * q1 = q2 : both are equally loaded, thus we pick t1 |
| * and update t1 as it will become more loaded |
| * than t2. |
| */ |
| |
| q1 += l->thr_conn[t1]; |
| q2 += l->thr_conn[t2]; |
| |
| if (q1 - q2 < 0) { |
| t = t1; |
| t2 = t2 ? t2 - 1 : LONGBITS - 1; |
| } |
| else if (q1 - q2 > 0) { |
| t = t2; |
| t1++; |
| if (t1 >= LONGBITS) |
| t1 = 0; |
| } |
| else { |
| t = t1; |
| t1++; |
| if (t1 >= LONGBITS) |
| t1 = 0; |
| } |
| |
| /* new value for thr_idx */ |
| t1 += (t2 << 16); |
| } while (unlikely(!_HA_ATOMIC_CAS(&l->thr_idx, &t0, t1))); |
| |
| /* We successfully selected the best thread "t" for this |
| * connection. We use deferred accepts even if it's the |
| * local thread because tests show that it's the best |
| * performing model, likely due to better cache locality |
| * when processing this loop. |
| */ |
| ring = &accept_queue_rings[t]; |
| if (accept_queue_push_mp(ring, cli_conn)) { |
| _HA_ATOMIC_INC(&activity[t].accq_pushed); |
| tasklet_wakeup(ring->tasklet); |
| continue; |
| } |
| /* If the ring is full we do a synchronous accept on |
| * the local thread here. |
| */ |
| _HA_ATOMIC_INC(&activity[t].accq_full); |
| } |
| #endif // USE_THREAD |
| |
| local_accept: |
| _HA_ATOMIC_INC(&l->thr_conn[tid]); |
| ret = l->accept(cli_conn); |
| if (unlikely(ret <= 0)) { |
| /* The connection was closed by stream_accept(). Either |
| * we just have to ignore it (ret == 0) or it's a critical |
| * error due to a resource shortage, and we must stop the |
| * listener (ret < 0). |
| */ |
| if (ret == 0) /* successful termination */ |
| continue; |
| |
| goto transient_error; |
| } |
| |
| /* increase the per-process number of cumulated sessions, this |
| * may only be done once l->accept() has accepted the connection. |
| */ |
| if (!(l->options & LI_O_UNLIMITED)) { |
| count = update_freq_ctr(&global.sess_per_sec, 1); |
| HA_ATOMIC_UPDATE_MAX(&global.sps_max, count); |
| } |
| #ifdef USE_OPENSSL |
| if (!(l->options & LI_O_UNLIMITED) && l->bind_conf && l->bind_conf->is_ssl) { |
| count = update_freq_ctr(&global.ssl_per_sec, 1); |
| HA_ATOMIC_UPDATE_MAX(&global.ssl_max, count); |
| } |
| #endif |
| |
| th_ctx->flags &= ~TH_FL_STUCK; // this thread is still running |
| } /* end of for (max_accept--) */ |
| |
| end: |
| if (next_conn) |
| _HA_ATOMIC_DEC(&l->nbconn); |
| |
| if (p && next_feconn) |
| _HA_ATOMIC_DEC(&p->feconn); |
| |
| if (next_actconn) |
| _HA_ATOMIC_DEC(&actconn); |
| |
| if ((l->state == LI_FULL && (!l->maxconn || l->nbconn < l->maxconn)) || |
| (l->state == LI_LIMITED && |
| ((!p || p->feconn < p->maxconn) && (actconn < global.maxconn) && |
| (!tick_isset(global_listener_queue_task->expire) || |
| tick_is_expired(global_listener_queue_task->expire, now_ms))))) { |
| /* at least one thread has to this when quitting */ |
| resume_listener(l); |
| |
| /* Dequeues all of the listeners waiting for a resource */ |
| dequeue_all_listeners(); |
| |
| if (p && !MT_LIST_ISEMPTY(&p->listener_queue) && |
| (!p->fe_sps_lim || freq_ctr_remain(&p->fe_sess_per_sec, p->fe_sps_lim, 0) > 0)) |
| dequeue_proxy_listeners(p); |
| } |
| return; |
| |
| transient_error: |
| /* pause the listener for up to 100 ms */ |
| expire = tick_add(now_ms, 100); |
| |
| /* This may be a shared socket that was paused by another process. |
| * Let's put it to pause in this case. |
| */ |
| if (l->rx.proto && l->rx.proto->rx_listening(&l->rx) == 0) { |
| pause_listener(l); |
| goto end; |
| } |
| |
| limit_global: |
| /* (re-)queue the listener to the global queue and set it to expire no |
| * later than <expire> ahead. The listener turns to LI_LIMITED. |
| */ |
| limit_listener(l, &global_listener_queue); |
| task_schedule(global_listener_queue_task, expire); |
| goto end; |
| |
| limit_proxy: |
| /* (re-)queue the listener to the proxy's queue and set it to expire no |
| * later than <expire> ahead. The listener turns to LI_LIMITED. |
| */ |
| limit_listener(l, &p->listener_queue); |
| if (p->task && tick_isset(expire)) |
| task_schedule(p->task, expire); |
| goto end; |
| } |
| |
| /* Notify the listener that a connection initiated from it was released. This |
| * is used to keep the connection count consistent and to possibly re-open |
| * listening when it was limited. |
| */ |
| void listener_release(struct listener *l) |
| { |
| struct proxy *fe = l->bind_conf->frontend; |
| |
| if (!(l->options & LI_O_UNLIMITED)) |
| _HA_ATOMIC_DEC(&actconn); |
| if (fe) |
| _HA_ATOMIC_DEC(&fe->feconn); |
| _HA_ATOMIC_DEC(&l->nbconn); |
| _HA_ATOMIC_DEC(&l->thr_conn[tid]); |
| |
| if (l->state == LI_FULL || l->state == LI_LIMITED) |
| resume_listener(l); |
| |
| /* Dequeues all of the listeners waiting for a resource */ |
| dequeue_all_listeners(); |
| |
| if (!MT_LIST_ISEMPTY(&fe->listener_queue) && |
| (!fe->fe_sps_lim || freq_ctr_remain(&fe->fe_sess_per_sec, fe->fe_sps_lim, 0) > 0)) |
| dequeue_proxy_listeners(fe); |
| } |
| |
| /* Initializes the listener queues. Returns 0 on success, otherwise ERR_* flags */ |
| static int listener_queue_init() |
| { |
| global_listener_queue_task = task_new_anywhere(); |
| if (!global_listener_queue_task) { |
| ha_alert("Out of memory when initializing global listener queue\n"); |
| return ERR_FATAL|ERR_ABORT; |
| } |
| /* very simple initialization, users will queue the task if needed */ |
| global_listener_queue_task->context = NULL; /* not even a context! */ |
| global_listener_queue_task->process = manage_global_listener_queue; |
| |
| return 0; |
| } |
| |
| static void listener_queue_deinit() |
| { |
| task_destroy(global_listener_queue_task); |
| global_listener_queue_task = NULL; |
| } |
| |
| REGISTER_CONFIG_POSTPARSER("multi-threaded listener queue", listener_queue_init); |
| REGISTER_POST_DEINIT(listener_queue_deinit); |
| |
| |
| /* This is the global management task for listeners. It enables listeners waiting |
| * for global resources when there are enough free resource, or at least once in |
| * a while. It is designed to be called as a task. It's exported so that it's easy |
| * to spot in "show tasks" or "show profiling". |
| */ |
| struct task *manage_global_listener_queue(struct task *t, void *context, unsigned int state) |
| { |
| /* If there are still too many concurrent connections, let's wait for |
| * some of them to go away. We don't need to re-arm the timer because |
| * each of them will scan the queue anyway. |
| */ |
| if (unlikely(actconn >= global.maxconn)) |
| goto out; |
| |
| /* We should periodically try to enable listeners waiting for a global |
| * resource here, because it is possible, though very unlikely, that |
| * they have been blocked by a temporary lack of global resource such |
| * as a file descriptor or memory and that the temporary condition has |
| * disappeared. |
| */ |
| dequeue_all_listeners(); |
| |
| out: |
| t->expire = TICK_ETERNITY; |
| task_queue(t); |
| return t; |
| } |
| |
| /* |
| * Registers the bind keyword list <kwl> as a list of valid keywords for next |
| * parsing sessions. |
| */ |
| void bind_register_keywords(struct bind_kw_list *kwl) |
| { |
| LIST_APPEND(&bind_keywords.list, &kwl->list); |
| } |
| |
| /* Return a pointer to the bind keyword <kw>, or NULL if not found. If the |
| * keyword is found with a NULL ->parse() function, then an attempt is made to |
| * find one with a valid ->parse() function. This way it is possible to declare |
| * platform-dependant, known keywords as NULL, then only declare them as valid |
| * if some options are met. Note that if the requested keyword contains an |
| * opening parenthesis, everything from this point is ignored. |
| */ |
| struct bind_kw *bind_find_kw(const char *kw) |
| { |
| int index; |
| const char *kwend; |
| struct bind_kw_list *kwl; |
| struct bind_kw *ret = NULL; |
| |
| kwend = strchr(kw, '('); |
| if (!kwend) |
| kwend = kw + strlen(kw); |
| |
| list_for_each_entry(kwl, &bind_keywords.list, list) { |
| for (index = 0; kwl->kw[index].kw != NULL; index++) { |
| if ((strncmp(kwl->kw[index].kw, kw, kwend - kw) == 0) && |
| kwl->kw[index].kw[kwend-kw] == 0) { |
| if (kwl->kw[index].parse) |
| return &kwl->kw[index]; /* found it !*/ |
| else |
| ret = &kwl->kw[index]; /* may be OK */ |
| } |
| } |
| } |
| return ret; |
| } |
| |
| /* Dumps all registered "bind" keywords to the <out> string pointer. The |
| * unsupported keywords are only dumped if their supported form was not |
| * found. |
| */ |
| void bind_dump_kws(char **out) |
| { |
| struct bind_kw_list *kwl; |
| int index; |
| |
| if (!out) |
| return; |
| |
| *out = NULL; |
| list_for_each_entry(kwl, &bind_keywords.list, list) { |
| for (index = 0; kwl->kw[index].kw != NULL; index++) { |
| if (kwl->kw[index].parse || |
| bind_find_kw(kwl->kw[index].kw) == &kwl->kw[index]) { |
| memprintf(out, "%s[%4s] %s%s%s\n", *out ? *out : "", |
| kwl->scope, |
| kwl->kw[index].kw, |
| kwl->kw[index].skip ? " <arg>" : "", |
| kwl->kw[index].parse ? "" : " (not supported)"); |
| } |
| } |
| } |
| } |
| |
| /* Try to find in srv_keyword the word that looks closest to <word> by counting |
| * transitions between letters, digits and other characters. Will return the |
| * best matching word if found, otherwise NULL. |
| */ |
| const char *bind_find_best_kw(const char *word) |
| { |
| uint8_t word_sig[1024]; |
| uint8_t list_sig[1024]; |
| const struct bind_kw_list *kwl; |
| const char *best_ptr = NULL; |
| int dist, best_dist = INT_MAX; |
| int index; |
| |
| make_word_fingerprint(word_sig, word); |
| list_for_each_entry(kwl, &bind_keywords.list, list) { |
| for (index = 0; kwl->kw[index].kw != NULL; index++) { |
| make_word_fingerprint(list_sig, kwl->kw[index].kw); |
| dist = word_fingerprint_distance(word_sig, list_sig); |
| if (dist < best_dist) { |
| best_dist = dist; |
| best_ptr = kwl->kw[index].kw; |
| } |
| } |
| } |
| |
| if (best_dist > 2 * strlen(word) || (best_ptr && best_dist > 2 * strlen(best_ptr))) |
| best_ptr = NULL; |
| |
| return best_ptr; |
| } |
| |
| /* allocate an bind_conf struct for a bind line, and chain it to the frontend <fe>. |
| * If <arg> is not NULL, it is duplicated into ->arg to store useful config |
| * information for error reporting. NULL is returned on error. |
| */ |
| struct bind_conf *bind_conf_alloc(struct proxy *fe, const char *file, |
| int line, const char *arg, struct xprt_ops *xprt) |
| { |
| struct bind_conf *bind_conf = calloc(1, sizeof(*bind_conf)); |
| |
| if (!bind_conf) |
| goto err; |
| |
| bind_conf->file = strdup(file); |
| if (!bind_conf->file) |
| goto err; |
| bind_conf->line = line; |
| if (arg) { |
| bind_conf->arg = strdup(arg); |
| if (!bind_conf->arg) |
| goto err; |
| } |
| |
| LIST_APPEND(&fe->conf.bind, &bind_conf->by_fe); |
| bind_conf->settings.ux.uid = -1; |
| bind_conf->settings.ux.gid = -1; |
| bind_conf->settings.ux.mode = 0; |
| bind_conf->settings.shards = 1; |
| bind_conf->xprt = xprt; |
| bind_conf->frontend = fe; |
| bind_conf->severity_output = CLI_SEVERITY_NONE; |
| #ifdef USE_OPENSSL |
| HA_RWLOCK_INIT(&bind_conf->sni_lock); |
| bind_conf->sni_ctx = EB_ROOT; |
| bind_conf->sni_w_ctx = EB_ROOT; |
| #endif |
| LIST_INIT(&bind_conf->listeners); |
| return bind_conf; |
| |
| err: |
| if (bind_conf) { |
| ha_free(&bind_conf->file); |
| ha_free(&bind_conf->arg); |
| } |
| ha_free(&bind_conf); |
| return NULL; |
| } |
| |
| const char *listener_state_str(const struct listener *l) |
| { |
| static const char *states[8] = { |
| "NEW", "INI", "ASS", "PAU", "LIS", "RDY", "FUL", "LIM", |
| }; |
| unsigned int st = l->state; |
| |
| if (st >= sizeof(states) / sizeof(*states)) |
| return "INVALID"; |
| return states[st]; |
| } |
| |
| /************************************************************************/ |
| /* All supported sample and ACL keywords must be declared here. */ |
| /************************************************************************/ |
| |
| /* set temp integer to the number of connexions to the same listening socket */ |
| static int |
| smp_fetch_dconn(const struct arg *args, struct sample *smp, const char *kw, void *private) |
| { |
| smp->data.type = SMP_T_SINT; |
| smp->data.u.sint = smp->sess->listener->nbconn; |
| return 1; |
| } |
| |
| /* set temp integer to the id of the socket (listener) */ |
| static int |
| smp_fetch_so_id(const struct arg *args, struct sample *smp, const char *kw, void *private) |
| { |
| smp->data.type = SMP_T_SINT; |
| smp->data.u.sint = smp->sess->listener->luid; |
| return 1; |
| } |
| static int |
| smp_fetch_so_name(const struct arg *args, struct sample *smp, const char *kw, void *private) |
| { |
| smp->data.u.str.area = smp->sess->listener->name; |
| if (!smp->data.u.str.area) |
| return 0; |
| |
| smp->data.type = SMP_T_STR; |
| smp->flags = SMP_F_CONST; |
| smp->data.u.str.data = strlen(smp->data.u.str.area); |
| return 1; |
| } |
| |
| /* parse the "accept-proxy" bind keyword */ |
| static int bind_parse_accept_proxy(char **args, int cur_arg, struct proxy *px, struct bind_conf *conf, char **err) |
| { |
| struct listener *l; |
| |
| list_for_each_entry(l, &conf->listeners, by_bind) |
| l->options |= LI_O_ACC_PROXY; |
| |
| return 0; |
| } |
| |
| /* parse the "accept-netscaler-cip" bind keyword */ |
| static int bind_parse_accept_netscaler_cip(char **args, int cur_arg, struct proxy *px, struct bind_conf *conf, char **err) |
| { |
| struct listener *l; |
| uint32_t val; |
| |
| if (!*args[cur_arg + 1]) { |
| memprintf(err, "'%s' : missing value", args[cur_arg]); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| val = atol(args[cur_arg + 1]); |
| if (val <= 0) { |
| memprintf(err, "'%s' : invalid value %d, must be >= 0", args[cur_arg], val); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| list_for_each_entry(l, &conf->listeners, by_bind) { |
| l->options |= LI_O_ACC_CIP; |
| conf->ns_cip_magic = val; |
| } |
| |
| return 0; |
| } |
| |
| /* parse the "backlog" bind keyword */ |
| static int bind_parse_backlog(char **args, int cur_arg, struct proxy *px, struct bind_conf *conf, char **err) |
| { |
| struct listener *l; |
| int val; |
| |
| if (!*args[cur_arg + 1]) { |
| memprintf(err, "'%s' : missing value", args[cur_arg]); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| val = atol(args[cur_arg + 1]); |
| if (val < 0) { |
| memprintf(err, "'%s' : invalid value %d, must be > 0", args[cur_arg], val); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| list_for_each_entry(l, &conf->listeners, by_bind) |
| l->backlog = val; |
| |
| return 0; |
| } |
| |
| /* parse the "id" bind keyword */ |
| static int bind_parse_id(char **args, int cur_arg, struct proxy *px, struct bind_conf *conf, char **err) |
| { |
| struct eb32_node *node; |
| struct listener *l, *new; |
| char *error; |
| |
| if (conf->listeners.n != conf->listeners.p) { |
| memprintf(err, "'%s' can only be used with a single socket", args[cur_arg]); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| if (!*args[cur_arg + 1]) { |
| memprintf(err, "'%s' : expects an integer argument", args[cur_arg]); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| new = LIST_NEXT(&conf->listeners, struct listener *, by_bind); |
| new->luid = strtol(args[cur_arg + 1], &error, 10); |
| if (*error != '\0') { |
| memprintf(err, "'%s' : expects an integer argument, found '%s'", args[cur_arg], args[cur_arg + 1]); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| new->conf.id.key = new->luid; |
| |
| if (new->luid <= 0) { |
| memprintf(err, "'%s' : custom id has to be > 0", args[cur_arg]); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| node = eb32_lookup(&px->conf.used_listener_id, new->luid); |
| if (node) { |
| l = container_of(node, struct listener, conf.id); |
| memprintf(err, "'%s' : custom id %d already used at %s:%d ('bind %s')", |
| args[cur_arg], l->luid, l->bind_conf->file, l->bind_conf->line, |
| l->bind_conf->arg); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| eb32_insert(&px->conf.used_listener_id, &new->conf.id); |
| return 0; |
| } |
| |
| /* parse the "maxconn" bind keyword */ |
| static int bind_parse_maxconn(char **args, int cur_arg, struct proxy *px, struct bind_conf *conf, char **err) |
| { |
| struct listener *l; |
| int val; |
| |
| if (!*args[cur_arg + 1]) { |
| memprintf(err, "'%s' : missing value", args[cur_arg]); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| val = atol(args[cur_arg + 1]); |
| if (val < 0) { |
| memprintf(err, "'%s' : invalid value %d, must be >= 0", args[cur_arg], val); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| list_for_each_entry(l, &conf->listeners, by_bind) |
| l->maxconn = val; |
| |
| return 0; |
| } |
| |
| /* parse the "name" bind keyword */ |
| static int bind_parse_name(char **args, int cur_arg, struct proxy *px, struct bind_conf *conf, char **err) |
| { |
| struct listener *l; |
| |
| if (!*args[cur_arg + 1]) { |
| memprintf(err, "'%s' : missing name", args[cur_arg]); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| list_for_each_entry(l, &conf->listeners, by_bind) |
| l->name = strdup(args[cur_arg + 1]); |
| |
| return 0; |
| } |
| |
| /* parse the "nice" bind keyword */ |
| static int bind_parse_nice(char **args, int cur_arg, struct proxy *px, struct bind_conf *conf, char **err) |
| { |
| struct listener *l; |
| int val; |
| |
| if (!*args[cur_arg + 1]) { |
| memprintf(err, "'%s' : missing value", args[cur_arg]); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| val = atol(args[cur_arg + 1]); |
| if (val < -1024 || val > 1024) { |
| memprintf(err, "'%s' : invalid value %d, allowed range is -1024..1024", args[cur_arg], val); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| list_for_each_entry(l, &conf->listeners, by_bind) |
| l->nice = val; |
| |
| return 0; |
| } |
| |
| /* parse the "process" bind keyword */ |
| static int bind_parse_process(char **args, int cur_arg, struct proxy *px, struct bind_conf *conf, char **err) |
| { |
| char *slash; |
| unsigned long proc = 0, thread = 0; |
| |
| if ((slash = strchr(args[cur_arg + 1], '/')) != NULL) |
| *slash = 0; |
| |
| if (parse_process_number(args[cur_arg + 1], &proc, 1, NULL, err)) { |
| memprintf(err, "'%s' : %s", args[cur_arg], *err); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| if (slash) { |
| if (parse_process_number(slash+1, &thread, MAX_THREADS, NULL, err)) { |
| memprintf(err, "'%s' : %s", args[cur_arg], *err); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| *slash = '/'; |
| } |
| |
| conf->bind_thread |= thread; |
| |
| memprintf(err, "'process %s' on 'bind' lines is deprecated and will be removed in 2.7.", args[cur_arg+1]); |
| if (slash) |
| memprintf(err, "%s Please use 'thread %s' instead.", *err, slash + 1); |
| return ERR_WARN; |
| } |
| |
| /* parse the "proto" bind keyword */ |
| static int bind_parse_proto(char **args, int cur_arg, struct proxy *px, struct bind_conf *conf, char **err) |
| { |
| struct ist proto; |
| |
| if (!*args[cur_arg + 1]) { |
| memprintf(err, "'%s' : missing value", args[cur_arg]); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| proto = ist(args[cur_arg + 1]); |
| conf->mux_proto = get_mux_proto(proto); |
| if (!conf->mux_proto) { |
| memprintf(err, "'%s' : unknown MUX protocol '%s'", args[cur_arg], args[cur_arg+1]); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| return 0; |
| } |
| |
| /* parse the "shards" bind keyword. Takes an integer or "by-thread" */ |
| static int bind_parse_shards(char **args, int cur_arg, struct proxy *px, struct bind_conf *conf, char **err) |
| { |
| int val; |
| |
| if (!*args[cur_arg + 1]) { |
| memprintf(err, "'%s' : missing value", args[cur_arg]); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| if (strcmp(args[cur_arg + 1], "by-thread") == 0) { |
| val = MAX_THREADS; /* will be trimmed later anyway */ |
| } else { |
| val = atol(args[cur_arg + 1]); |
| if (val < 1 || val > MAX_THREADS) { |
| memprintf(err, "'%s' : invalid value %d, allowed range is %d..%d or 'by-thread'", args[cur_arg], val, 1, MAX_THREADS); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| } |
| |
| conf->settings.shards = val; |
| return 0; |
| } |
| |
| /* parse the "thread" bind keyword */ |
| static int bind_parse_thread(char **args, int cur_arg, struct proxy *px, struct bind_conf *conf, char **err) |
| { |
| char *sep = NULL; |
| ulong thread = 0; |
| long tgroup = 0; |
| |
| tgroup = strtol(args[cur_arg + 1], &sep, 10); |
| if (*sep == '/') { |
| /* a thread group was present */ |
| if (tgroup < 1 || tgroup > MAX_TGROUPS) { |
| memprintf(err, "'%s' thread-group number must be between 1 and %d (was %ld)", args[cur_arg + 1], MAX_TGROUPS, tgroup); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| sep++; |
| } |
| else { |
| /* no thread group */ |
| tgroup = 0; |
| sep = args[cur_arg + 1]; |
| } |
| |
| if ((conf->bind_tgroup || conf->bind_thread) && |
| conf->bind_tgroup != tgroup) { |
| memprintf(err, "'%s' multiple thread-groups are not supported", args[cur_arg + 1]); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| if (parse_process_number(sep, &thread, MAX_THREADS, NULL, err)) { |
| memprintf(err, "'%s' : %s", sep, *err); |
| return ERR_ALERT | ERR_FATAL; |
| } |
| |
| conf->bind_thread |= thread; |
| conf->bind_tgroup = tgroup; |
| return 0; |
| } |
| |
| /* config parser for global "tune.listener.multi-queue", accepts "on" or "off" */ |
| static int cfg_parse_tune_listener_mq(char **args, int section_type, struct proxy *curpx, |
| const struct proxy *defpx, const char *file, int line, |
| char **err) |
| { |
| if (too_many_args(1, args, err, NULL)) |
| return -1; |
| |
| if (strcmp(args[1], "on") == 0) |
| global.tune.options |= GTUNE_LISTENER_MQ; |
| else if (strcmp(args[1], "off") == 0) |
| global.tune.options &= ~GTUNE_LISTENER_MQ; |
| else { |
| memprintf(err, "'%s' expects either 'on' or 'off' but got '%s'.", args[0], args[1]); |
| return -1; |
| } |
| return 0; |
| } |
| |
| /* Note: must not be declared <const> as its list will be overwritten. |
| * Please take care of keeping this list alphabetically sorted. |
| */ |
| static struct sample_fetch_kw_list smp_kws = {ILH, { |
| { "dst_conn", smp_fetch_dconn, 0, NULL, SMP_T_SINT, SMP_USE_FTEND, }, |
| { "so_id", smp_fetch_so_id, 0, NULL, SMP_T_SINT, SMP_USE_FTEND, }, |
| { "so_name", smp_fetch_so_name, 0, NULL, SMP_T_STR, SMP_USE_FTEND, }, |
| { /* END */ }, |
| }}; |
| |
| INITCALL1(STG_REGISTER, sample_register_fetches, &smp_kws); |
| |
| /* Note: must not be declared <const> as its list will be overwritten. |
| * Please take care of keeping this list alphabetically sorted. |
| */ |
| static struct acl_kw_list acl_kws = {ILH, { |
| { /* END */ }, |
| }}; |
| |
| INITCALL1(STG_REGISTER, acl_register_keywords, &acl_kws); |
| |
| /* Note: must not be declared <const> as its list will be overwritten. |
| * Please take care of keeping this list alphabetically sorted, doing so helps |
| * all code contributors. |
| * Optional keywords are also declared with a NULL ->parse() function so that |
| * the config parser can report an appropriate error when a known keyword was |
| * not enabled. |
| */ |
| static struct bind_kw_list bind_kws = { "ALL", { }, { |
| { "accept-netscaler-cip", bind_parse_accept_netscaler_cip, 1 }, /* enable NetScaler Client IP insertion protocol */ |
| { "accept-proxy", bind_parse_accept_proxy, 0 }, /* enable PROXY protocol */ |
| { "backlog", bind_parse_backlog, 1 }, /* set backlog of listening socket */ |
| { "id", bind_parse_id, 1 }, /* set id of listening socket */ |
| { "maxconn", bind_parse_maxconn, 1 }, /* set maxconn of listening socket */ |
| { "name", bind_parse_name, 1 }, /* set name of listening socket */ |
| { "nice", bind_parse_nice, 1 }, /* set nice of listening socket */ |
| { "process", bind_parse_process, 1 }, /* set list of allowed process for this socket */ |
| { "proto", bind_parse_proto, 1 }, /* set the proto to use for all incoming connections */ |
| { "shards", bind_parse_shards, 1 }, /* set number of shards */ |
| { "thread", bind_parse_thread, 1 }, /* set list of allowed threads for this socket */ |
| { /* END */ }, |
| }}; |
| |
| INITCALL1(STG_REGISTER, bind_register_keywords, &bind_kws); |
| |
| /* config keyword parsers */ |
| static struct cfg_kw_list cfg_kws = {ILH, { |
| { CFG_GLOBAL, "tune.listener.multi-queue", cfg_parse_tune_listener_mq }, |
| { 0, NULL, NULL } |
| }}; |
| |
| INITCALL1(STG_REGISTER, cfg_register_keywords, &cfg_kws); |
| |
| /* |
| * Local variables: |
| * c-indent-level: 8 |
| * c-basic-offset: 8 |
| * End: |
| */ |