| /* |
| * AF_INET/AF_INET6 SOCK_STREAM protocol layer (tcp) |
| * |
| * Copyright 2000-2010 Willy Tarreau <w@1wt.eu> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| |
| #include <ctype.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <time.h> |
| |
| #include <sys/param.h> |
| #include <sys/socket.h> |
| #include <sys/stat.h> |
| #include <sys/types.h> |
| #include <sys/un.h> |
| |
| #include <netinet/tcp.h> |
| |
| #include <common/cfgparse.h> |
| #include <common/compat.h> |
| #include <common/config.h> |
| #include <common/debug.h> |
| #include <common/errors.h> |
| #include <common/mini-clist.h> |
| #include <common/standard.h> |
| |
| #include <types/global.h> |
| #include <types/server.h> |
| |
| #include <proto/acl.h> |
| #include <proto/arg.h> |
| #include <proto/buffers.h> |
| #include <proto/frontend.h> |
| #include <proto/log.h> |
| #include <proto/port_range.h> |
| #include <proto/protocols.h> |
| #include <proto/proto_tcp.h> |
| #include <proto/proxy.h> |
| #include <proto/sample.h> |
| #include <proto/session.h> |
| #include <proto/sock_raw.h> |
| #include <proto/stick_table.h> |
| #include <proto/stream_interface.h> |
| #include <proto/task.h> |
| #include <proto/buffers.h> |
| |
| #ifdef CONFIG_HAP_CTTPROXY |
| #include <import/ip_tproxy.h> |
| #endif |
| |
| static int tcp_bind_listeners(struct protocol *proto, char *errmsg, int errlen); |
| static int tcp_bind_listener(struct listener *listener, char *errmsg, int errlen); |
| static int tcp_connect_write(int fd); |
| static int tcp_connect_read(int fd); |
| |
| /* Note: must not be declared <const> as its list will be overwritten */ |
| static struct protocol proto_tcpv4 = { |
| .name = "tcpv4", |
| .sock_domain = AF_INET, |
| .sock_type = SOCK_STREAM, |
| .sock_prot = IPPROTO_TCP, |
| .sock_family = AF_INET, |
| .sock_addrlen = sizeof(struct sockaddr_in), |
| .l3_addrlen = 32/8, |
| .accept = &listener_accept, |
| .connect = tcp_connect_server, |
| .bind = tcp_bind_listener, |
| .bind_all = tcp_bind_listeners, |
| .unbind_all = unbind_all_listeners, |
| .enable_all = enable_all_listeners, |
| .get_src = tcp_get_src, |
| .get_dst = tcp_get_dst, |
| .listeners = LIST_HEAD_INIT(proto_tcpv4.listeners), |
| .nb_listeners = 0, |
| }; |
| |
| /* Note: must not be declared <const> as its list will be overwritten */ |
| static struct protocol proto_tcpv6 = { |
| .name = "tcpv6", |
| .sock_domain = AF_INET6, |
| .sock_type = SOCK_STREAM, |
| .sock_prot = IPPROTO_TCP, |
| .sock_family = AF_INET6, |
| .sock_addrlen = sizeof(struct sockaddr_in6), |
| .l3_addrlen = 128/8, |
| .accept = &listener_accept, |
| .connect = tcp_connect_server, |
| .bind = tcp_bind_listener, |
| .bind_all = tcp_bind_listeners, |
| .unbind_all = unbind_all_listeners, |
| .enable_all = enable_all_listeners, |
| .get_src = tcp_get_src, |
| .get_dst = tcp_get_dst, |
| .listeners = LIST_HEAD_INIT(proto_tcpv6.listeners), |
| .nb_listeners = 0, |
| }; |
| |
| |
| /* Binds ipv4/ipv6 address <local> to socket <fd>, unless <flags> is set, in which |
| * case we try to bind <remote>. <flags> is a 2-bit field consisting of : |
| * - 0 : ignore remote address (may even be a NULL pointer) |
| * - 1 : use provided address |
| * - 2 : use provided port |
| * - 3 : use both |
| * |
| * The function supports multiple foreign binding methods : |
| * - linux_tproxy: we directly bind to the foreign address |
| * - cttproxy: we bind to a local address then nat. |
| * The second one can be used as a fallback for the first one. |
| * This function returns 0 when everything's OK, 1 if it could not bind, to the |
| * local address, 2 if it could not bind to the foreign address. |
| */ |
| int tcp_bind_socket(int fd, int flags, struct sockaddr_storage *local, struct sockaddr_storage *remote) |
| { |
| struct sockaddr_storage bind_addr; |
| int foreign_ok = 0; |
| int ret; |
| |
| #ifdef CONFIG_HAP_LINUX_TPROXY |
| static int ip_transp_working = 1; |
| if (flags && ip_transp_working) { |
| if (setsockopt(fd, SOL_IP, IP_TRANSPARENT, &one, sizeof(one)) == 0 |
| || setsockopt(fd, SOL_IP, IP_FREEBIND, &one, sizeof(one)) == 0) |
| foreign_ok = 1; |
| else |
| ip_transp_working = 0; |
| } |
| #endif |
| if (flags) { |
| memset(&bind_addr, 0, sizeof(bind_addr)); |
| bind_addr.ss_family = remote->ss_family; |
| switch (remote->ss_family) { |
| case AF_INET: |
| if (flags & 1) |
| ((struct sockaddr_in *)&bind_addr)->sin_addr = ((struct sockaddr_in *)remote)->sin_addr; |
| if (flags & 2) |
| ((struct sockaddr_in *)&bind_addr)->sin_port = ((struct sockaddr_in *)remote)->sin_port; |
| break; |
| case AF_INET6: |
| if (flags & 1) |
| ((struct sockaddr_in6 *)&bind_addr)->sin6_addr = ((struct sockaddr_in6 *)remote)->sin6_addr; |
| if (flags & 2) |
| ((struct sockaddr_in6 *)&bind_addr)->sin6_port = ((struct sockaddr_in6 *)remote)->sin6_port; |
| break; |
| default: |
| /* we don't want to try to bind to an unknown address family */ |
| foreign_ok = 0; |
| } |
| } |
| |
| setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one)); |
| if (foreign_ok) { |
| ret = bind(fd, (struct sockaddr *)&bind_addr, get_addr_len(&bind_addr)); |
| if (ret < 0) |
| return 2; |
| } |
| else { |
| ret = bind(fd, (struct sockaddr *)local, get_addr_len(local)); |
| if (ret < 0) |
| return 1; |
| } |
| |
| if (!flags) |
| return 0; |
| |
| #ifdef CONFIG_HAP_CTTPROXY |
| if (!foreign_ok && remote->ss_family == AF_INET) { |
| struct in_tproxy itp1, itp2; |
| memset(&itp1, 0, sizeof(itp1)); |
| |
| itp1.op = TPROXY_ASSIGN; |
| itp1.v.addr.faddr = ((struct sockaddr_in *)&bind_addr)->sin_addr; |
| itp1.v.addr.fport = ((struct sockaddr_in *)&bind_addr)->sin_port; |
| |
| /* set connect flag on socket */ |
| itp2.op = TPROXY_FLAGS; |
| itp2.v.flags = ITP_CONNECT | ITP_ONCE; |
| |
| if (setsockopt(fd, SOL_IP, IP_TPROXY, &itp1, sizeof(itp1)) != -1 && |
| setsockopt(fd, SOL_IP, IP_TPROXY, &itp2, sizeof(itp2)) != -1) { |
| foreign_ok = 1; |
| } |
| } |
| #endif |
| if (!foreign_ok) |
| /* we could not bind to a foreign address */ |
| return 2; |
| |
| return 0; |
| } |
| |
| |
| /* |
| * This function initiates a connection to the target assigned to this session |
| * (si->{target,addr.to}). A source address may be pointed to by si->addr.from |
| * in case of transparent proxying. Normal source bind addresses are still |
| * determined locally (due to the possible need of a source port). |
| * si->target may point either to a valid server or to a backend, depending |
| * on si->target.type. Only TARG_TYPE_PROXY and TARG_TYPE_SERVER are supported. |
| * |
| * It can return one of : |
| * - SN_ERR_NONE if everything's OK |
| * - SN_ERR_SRVTO if there are no more servers |
| * - SN_ERR_SRVCL if the connection was refused by the server |
| * - SN_ERR_PRXCOND if the connection has been limited by the proxy (maxconn) |
| * - SN_ERR_RESOURCE if a system resource is lacking (eg: fd limits, ports, ...) |
| * - SN_ERR_INTERNAL for any other purely internal errors |
| * Additionnally, in the case of SN_ERR_RESOURCE, an emergency log will be emitted. |
| */ |
| |
| int tcp_connect_server(struct stream_interface *si) |
| { |
| int fd; |
| struct server *srv; |
| struct proxy *be; |
| |
| switch (si->target.type) { |
| case TARG_TYPE_PROXY: |
| be = si->target.ptr.p; |
| srv = NULL; |
| break; |
| case TARG_TYPE_SERVER: |
| srv = si->target.ptr.s; |
| be = srv->proxy; |
| break; |
| default: |
| return SN_ERR_INTERNAL; |
| } |
| |
| if ((fd = si->fd = socket(si->addr.to.ss_family, SOCK_STREAM, IPPROTO_TCP)) == -1) { |
| qfprintf(stderr, "Cannot get a server socket.\n"); |
| |
| if (errno == ENFILE) |
| send_log(be, LOG_EMERG, |
| "Proxy %s reached system FD limit at %d. Please check system tunables.\n", |
| be->id, maxfd); |
| else if (errno == EMFILE) |
| send_log(be, LOG_EMERG, |
| "Proxy %s reached process FD limit at %d. Please check 'ulimit-n' and restart.\n", |
| be->id, maxfd); |
| else if (errno == ENOBUFS || errno == ENOMEM) |
| send_log(be, LOG_EMERG, |
| "Proxy %s reached system memory limit at %d sockets. Please check system tunables.\n", |
| be->id, maxfd); |
| /* this is a resource error */ |
| return SN_ERR_RESOURCE; |
| } |
| |
| if (fd >= global.maxsock) { |
| /* do not log anything there, it's a normal condition when this option |
| * is used to serialize connections to a server ! |
| */ |
| Alert("socket(): not enough free sockets. Raise -n argument. Giving up.\n"); |
| close(fd); |
| return SN_ERR_PRXCOND; /* it is a configuration limit */ |
| } |
| |
| if ((fcntl(fd, F_SETFL, O_NONBLOCK)==-1) || |
| (setsockopt(fd, IPPROTO_TCP, TCP_NODELAY, &one, sizeof(one)) == -1)) { |
| qfprintf(stderr,"Cannot set client socket to non blocking mode.\n"); |
| close(fd); |
| return SN_ERR_INTERNAL; |
| } |
| |
| if (be->options & PR_O_TCP_SRV_KA) |
| setsockopt(fd, SOL_SOCKET, SO_KEEPALIVE, &one, sizeof(one)); |
| |
| if (be->options & PR_O_TCP_NOLING) |
| si->flags |= SI_FL_NOLINGER; |
| |
| /* allow specific binding : |
| * - server-specific at first |
| * - proxy-specific next |
| */ |
| if (srv != NULL && srv->state & SRV_BIND_SRC) { |
| int ret, flags = 0; |
| |
| switch (srv->state & SRV_TPROXY_MASK) { |
| case SRV_TPROXY_ADDR: |
| case SRV_TPROXY_CLI: |
| flags = 3; |
| break; |
| case SRV_TPROXY_CIP: |
| case SRV_TPROXY_DYN: |
| flags = 1; |
| break; |
| } |
| |
| #ifdef SO_BINDTODEVICE |
| /* Note: this might fail if not CAP_NET_RAW */ |
| if (srv->iface_name) |
| setsockopt(fd, SOL_SOCKET, SO_BINDTODEVICE, srv->iface_name, srv->iface_len + 1); |
| #endif |
| |
| if (srv->sport_range) { |
| int attempts = 10; /* should be more than enough to find a spare port */ |
| struct sockaddr_storage src; |
| |
| ret = 1; |
| src = srv->source_addr; |
| |
| do { |
| /* note: in case of retry, we may have to release a previously |
| * allocated port, hence this loop's construct. |
| */ |
| port_range_release_port(fdinfo[fd].port_range, fdinfo[fd].local_port); |
| fdinfo[fd].port_range = NULL; |
| |
| if (!attempts) |
| break; |
| attempts--; |
| |
| fdinfo[fd].local_port = port_range_alloc_port(srv->sport_range); |
| if (!fdinfo[fd].local_port) |
| break; |
| |
| fdinfo[fd].port_range = srv->sport_range; |
| set_host_port(&src, fdinfo[fd].local_port); |
| |
| ret = tcp_bind_socket(fd, flags, &src, &si->addr.from); |
| } while (ret != 0); /* binding NOK */ |
| } |
| else { |
| ret = tcp_bind_socket(fd, flags, &srv->source_addr, &si->addr.from); |
| } |
| |
| if (ret) { |
| port_range_release_port(fdinfo[fd].port_range, fdinfo[fd].local_port); |
| fdinfo[fd].port_range = NULL; |
| close(fd); |
| |
| if (ret == 1) { |
| Alert("Cannot bind to source address before connect() for server %s/%s. Aborting.\n", |
| be->id, srv->id); |
| send_log(be, LOG_EMERG, |
| "Cannot bind to source address before connect() for server %s/%s.\n", |
| be->id, srv->id); |
| } else { |
| Alert("Cannot bind to tproxy source address before connect() for server %s/%s. Aborting.\n", |
| be->id, srv->id); |
| send_log(be, LOG_EMERG, |
| "Cannot bind to tproxy source address before connect() for server %s/%s.\n", |
| be->id, srv->id); |
| } |
| return SN_ERR_RESOURCE; |
| } |
| } |
| else if (be->options & PR_O_BIND_SRC) { |
| int ret, flags = 0; |
| |
| switch (be->options & PR_O_TPXY_MASK) { |
| case PR_O_TPXY_ADDR: |
| case PR_O_TPXY_CLI: |
| flags = 3; |
| break; |
| case PR_O_TPXY_CIP: |
| case PR_O_TPXY_DYN: |
| flags = 1; |
| break; |
| } |
| |
| #ifdef SO_BINDTODEVICE |
| /* Note: this might fail if not CAP_NET_RAW */ |
| if (be->iface_name) |
| setsockopt(fd, SOL_SOCKET, SO_BINDTODEVICE, be->iface_name, be->iface_len + 1); |
| #endif |
| ret = tcp_bind_socket(fd, flags, &be->source_addr, &si->addr.from); |
| if (ret) { |
| close(fd); |
| if (ret == 1) { |
| Alert("Cannot bind to source address before connect() for proxy %s. Aborting.\n", |
| be->id); |
| send_log(be, LOG_EMERG, |
| "Cannot bind to source address before connect() for proxy %s.\n", |
| be->id); |
| } else { |
| Alert("Cannot bind to tproxy source address before connect() for proxy %s. Aborting.\n", |
| be->id); |
| send_log(be, LOG_EMERG, |
| "Cannot bind to tproxy source address before connect() for proxy %s.\n", |
| be->id); |
| } |
| return SN_ERR_RESOURCE; |
| } |
| } |
| |
| #if defined(TCP_QUICKACK) |
| /* disabling tcp quick ack now allows the first request to leave the |
| * machine with the first ACK. We only do this if there are pending |
| * data in the buffer. |
| */ |
| if ((be->options2 & PR_O2_SMARTCON) && si->ob->o) |
| setsockopt(fd, IPPROTO_TCP, TCP_QUICKACK, &zero, sizeof(zero)); |
| #endif |
| |
| if (global.tune.server_sndbuf) |
| setsockopt(fd, SOL_SOCKET, SO_SNDBUF, &global.tune.server_sndbuf, sizeof(global.tune.server_sndbuf)); |
| |
| if (global.tune.server_rcvbuf) |
| setsockopt(fd, SOL_SOCKET, SO_RCVBUF, &global.tune.server_rcvbuf, sizeof(global.tune.server_rcvbuf)); |
| |
| si->flags &= ~SI_FL_FROM_SET; |
| if ((connect(fd, (struct sockaddr *)&si->addr.to, get_addr_len(&si->addr.to)) == -1) && |
| (errno != EINPROGRESS) && (errno != EALREADY) && (errno != EISCONN)) { |
| |
| if (errno == EAGAIN || errno == EADDRINUSE) { |
| char *msg; |
| if (errno == EAGAIN) /* no free ports left, try again later */ |
| msg = "no free ports"; |
| else |
| msg = "local address already in use"; |
| |
| qfprintf(stderr,"Cannot connect: %s.\n",msg); |
| port_range_release_port(fdinfo[fd].port_range, fdinfo[fd].local_port); |
| fdinfo[fd].port_range = NULL; |
| close(fd); |
| send_log(be, LOG_EMERG, |
| "Connect() failed for server %s/%s: %s.\n", |
| be->id, srv->id, msg); |
| return SN_ERR_RESOURCE; |
| } else if (errno == ETIMEDOUT) { |
| //qfprintf(stderr,"Connect(): ETIMEDOUT"); |
| port_range_release_port(fdinfo[fd].port_range, fdinfo[fd].local_port); |
| fdinfo[fd].port_range = NULL; |
| close(fd); |
| return SN_ERR_SRVTO; |
| } else { |
| // (errno == ECONNREFUSED || errno == ENETUNREACH || errno == EACCES || errno == EPERM) |
| //qfprintf(stderr,"Connect(): %d", errno); |
| port_range_release_port(fdinfo[fd].port_range, fdinfo[fd].local_port); |
| fdinfo[fd].port_range = NULL; |
| close(fd); |
| return SN_ERR_SRVCL; |
| } |
| } |
| |
| /* needs src ip/port for logging */ |
| if (si->flags & SI_FL_SRC_ADDR) |
| si_get_from_addr(si); |
| |
| fdtab[fd].owner = si; |
| fdtab[fd].state = FD_STCONN; /* connection in progress */ |
| fdtab[fd].flags = FD_FL_TCP | FD_FL_TCP_NODELAY; |
| |
| /* If we have nothing to send, we want to confirm that the TCP |
| * connection is established before doing so, so we use our own write |
| * callback then switch to the sock layer. |
| */ |
| if ((si->ob->flags & BF_OUT_EMPTY) && !si->send_proxy_ofs) { |
| fdtab[fd].cb[DIR_RD].f = tcp_connect_read; |
| fdtab[fd].cb[DIR_WR].f = tcp_connect_write; |
| } |
| else { |
| fdtab[fd].cb[DIR_RD].f = si->sock.read; |
| fdtab[fd].cb[DIR_WR].f = si->sock.write; |
| } |
| |
| fdinfo[fd].peeraddr = (struct sockaddr *)&si->addr.to; |
| fdinfo[fd].peerlen = get_addr_len(&si->addr.to); |
| |
| fd_insert(fd); |
| EV_FD_SET(fd, DIR_WR); /* for connect status */ |
| |
| si->state = SI_ST_CON; |
| si->flags |= SI_FL_CAP_SPLTCP; /* TCP supports splicing */ |
| si->exp = tick_add_ifset(now_ms, be->timeout.connect); |
| |
| return SN_ERR_NONE; /* connection is OK */ |
| } |
| |
| |
| /* |
| * Retrieves the source address for the socket <fd>, with <dir> indicating |
| * if we're a listener (=0) or an initiator (!=0). It returns 0 in case of |
| * success, -1 in case of error. The socket's source address is stored in |
| * <sa> for <salen> bytes. |
| */ |
| int tcp_get_src(int fd, struct sockaddr *sa, socklen_t salen, int dir) |
| { |
| if (dir) |
| return getsockname(fd, sa, &salen); |
| else |
| return getpeername(fd, sa, &salen); |
| } |
| |
| |
| /* |
| * Retrieves the original destination address for the socket <fd>, with <dir> |
| * indicating if we're a listener (=0) or an initiator (!=0). In the case of a |
| * listener, if the original destination address was translated, the original |
| * address is retrieved. It returns 0 in case of success, -1 in case of error. |
| * The socket's source address is stored in <sa> for <salen> bytes. |
| */ |
| int tcp_get_dst(int fd, struct sockaddr *sa, socklen_t salen, int dir) |
| { |
| if (dir) |
| return getpeername(fd, sa, &salen); |
| #if defined(TPROXY) && defined(SO_ORIGINAL_DST) |
| else if (getsockopt(fd, SOL_IP, SO_ORIGINAL_DST, sa, &salen) == 0) |
| return 0; |
| #endif |
| else |
| return getsockname(fd, sa, &salen); |
| } |
| |
| /* This is the callback which is set when a connection establishment is pending |
| * and we have nothing to send, or if we have an init function we want to call |
| * once the connection is established. |
| */ |
| static int tcp_connect_write(int fd) |
| { |
| struct stream_interface *si = fdtab[fd].owner; |
| struct buffer *b = si->ob; |
| int retval = 1; |
| |
| if (fdtab[fd].state == FD_STERROR) |
| goto out_error; |
| |
| if (fdtab[fd].state != FD_STCONN) { |
| retval = 0; |
| goto out_ignore; /* strange we were called while ready */ |
| } |
| |
| /* we might have been called just after an asynchronous shutw */ |
| if (b->flags & BF_SHUTW) |
| goto out_wakeup; |
| |
| /* We have no data to send to check the connection, and |
| * getsockopt() will not inform us whether the connection |
| * is still pending. So we'll reuse connect() to check the |
| * state of the socket. This has the advantage of giving us |
| * the following info : |
| * - error |
| * - connecting (EALREADY, EINPROGRESS) |
| * - connected (EISCONN, 0) |
| */ |
| if ((connect(fd, fdinfo[fd].peeraddr, fdinfo[fd].peerlen) == 0)) |
| errno = 0; |
| |
| if (errno == EALREADY || errno == EINPROGRESS) { |
| retval = 0; |
| goto out_ignore; |
| } |
| |
| if (errno && errno != EISCONN) |
| goto out_error; |
| |
| /* OK we just need to indicate that we got a connection |
| * and that we wrote nothing. |
| */ |
| b->flags |= BF_WRITE_NULL; |
| |
| /* The FD is ready now, we can hand the handlers to the socket layer */ |
| fdtab[fd].cb[DIR_RD].f = si->sock.read; |
| fdtab[fd].cb[DIR_WR].f = si->sock.write; |
| fdtab[fd].state = FD_STREADY; |
| si->exp = TICK_ETERNITY; |
| |
| out_wakeup: |
| task_wakeup(si->owner, TASK_WOKEN_IO); |
| |
| out_ignore: |
| fdtab[fd].ev &= ~FD_POLL_OUT; |
| return retval; |
| |
| out_error: |
| /* Write error on the file descriptor. We mark the FD as STERROR so |
| * that we don't use it anymore. The error is reported to the stream |
| * interface which will take proper action. We must not perturbate the |
| * buffer because the stream interface wants to ensure transparent |
| * connection retries. |
| */ |
| |
| fdtab[fd].state = FD_STERROR; |
| fdtab[fd].ev &= ~FD_POLL_STICKY; |
| EV_FD_REM(fd); |
| si->flags |= SI_FL_ERR; |
| goto out_wakeup; |
| } |
| |
| |
| /* might be used on connect error */ |
| static int tcp_connect_read(int fd) |
| { |
| struct stream_interface *si = fdtab[fd].owner; |
| int retval; |
| |
| retval = 1; |
| |
| if (fdtab[fd].state == FD_STERROR) |
| goto out_error; |
| |
| if (fdtab[fd].state != FD_STCONN) { |
| retval = 0; |
| goto out_ignore; /* strange we were called while ready */ |
| } |
| |
| /* stop here if we reached the end of data */ |
| if ((fdtab[fd].ev & (FD_POLL_IN|FD_POLL_HUP)) == FD_POLL_HUP) |
| goto out_error; |
| |
| out_wakeup: |
| task_wakeup(si->owner, TASK_WOKEN_IO); |
| out_ignore: |
| fdtab[fd].ev &= ~FD_POLL_IN; |
| return retval; |
| |
| out_error: |
| /* Read error on the file descriptor. We mark the FD as STERROR so |
| * that we don't use it anymore. The error is reported to the stream |
| * interface which will take proper action. We must not perturbate the |
| * buffer because the stream interface wants to ensure transparent |
| * connection retries. |
| */ |
| |
| fdtab[fd].state = FD_STERROR; |
| fdtab[fd].ev &= ~FD_POLL_STICKY; |
| EV_FD_REM(fd); |
| si->flags |= SI_FL_ERR; |
| goto out_wakeup; |
| } |
| |
| |
| /* This function tries to bind a TCPv4/v6 listener. It may return a warning or |
| * an error message in <err> if the message is at most <errlen> bytes long |
| * (including '\0'). The return value is composed from ERR_ABORT, ERR_WARN, |
| * ERR_ALERT, ERR_RETRYABLE and ERR_FATAL. ERR_NONE indicates that everything |
| * was alright and that no message was returned. ERR_RETRYABLE means that an |
| * error occurred but that it may vanish after a retry (eg: port in use), and |
| * ERR_FATAL indicates a non-fixable error. ERR_WARN and ERR_ALERT do not alter |
| * the meaning of the error, but just indicate that a message is present which |
| * should be displayed with the respective level. Last, ERR_ABORT indicates |
| * that it's pointless to try to start other listeners. No error message is |
| * returned if errlen is NULL. |
| */ |
| int tcp_bind_listener(struct listener *listener, char *errmsg, int errlen) |
| { |
| __label__ tcp_return, tcp_close_return; |
| int fd, err; |
| const char *msg = NULL; |
| |
| /* ensure we never return garbage */ |
| if (errmsg && errlen) |
| *errmsg = 0; |
| |
| if (listener->state != LI_ASSIGNED) |
| return ERR_NONE; /* already bound */ |
| |
| err = ERR_NONE; |
| |
| if ((fd = socket(listener->addr.ss_family, SOCK_STREAM, IPPROTO_TCP)) == -1) { |
| err |= ERR_RETRYABLE | ERR_ALERT; |
| msg = "cannot create listening socket"; |
| goto tcp_return; |
| } |
| |
| if (fd >= global.maxsock) { |
| err |= ERR_FATAL | ERR_ABORT | ERR_ALERT; |
| msg = "not enough free sockets (raise '-n' parameter)"; |
| goto tcp_close_return; |
| } |
| |
| if (fcntl(fd, F_SETFL, O_NONBLOCK) == -1) { |
| err |= ERR_FATAL | ERR_ALERT; |
| msg = "cannot make socket non-blocking"; |
| goto tcp_close_return; |
| } |
| |
| if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one)) == -1) { |
| /* not fatal but should be reported */ |
| msg = "cannot do so_reuseaddr"; |
| err |= ERR_ALERT; |
| } |
| |
| if (listener->options & LI_O_NOLINGER) |
| setsockopt(fd, SOL_SOCKET, SO_LINGER, &nolinger, sizeof(struct linger)); |
| |
| #ifdef SO_REUSEPORT |
| /* OpenBSD supports this. As it's present in old libc versions of Linux, |
| * it might return an error that we will silently ignore. |
| */ |
| setsockopt(fd, SOL_SOCKET, SO_REUSEPORT, &one, sizeof(one)); |
| #endif |
| #ifdef CONFIG_HAP_LINUX_TPROXY |
| if ((listener->options & LI_O_FOREIGN) |
| && (setsockopt(fd, SOL_IP, IP_TRANSPARENT, &one, sizeof(one)) == -1) |
| && (setsockopt(fd, SOL_IP, IP_FREEBIND, &one, sizeof(one)) == -1)) { |
| msg = "cannot make listening socket transparent"; |
| err |= ERR_ALERT; |
| } |
| #endif |
| #ifdef SO_BINDTODEVICE |
| /* Note: this might fail if not CAP_NET_RAW */ |
| if (listener->interface) { |
| if (setsockopt(fd, SOL_SOCKET, SO_BINDTODEVICE, |
| listener->interface, strlen(listener->interface) + 1) == -1) { |
| msg = "cannot bind listener to device"; |
| err |= ERR_WARN; |
| } |
| } |
| #endif |
| #if defined(TCP_MAXSEG) |
| if (listener->maxseg > 0) { |
| if (setsockopt(fd, IPPROTO_TCP, TCP_MAXSEG, |
| &listener->maxseg, sizeof(listener->maxseg)) == -1) { |
| msg = "cannot set MSS"; |
| err |= ERR_WARN; |
| } |
| } |
| #endif |
| #if defined(TCP_DEFER_ACCEPT) |
| if (listener->options & LI_O_DEF_ACCEPT) { |
| /* defer accept by up to one second */ |
| int accept_delay = 1; |
| if (setsockopt(fd, IPPROTO_TCP, TCP_DEFER_ACCEPT, &accept_delay, sizeof(accept_delay)) == -1) { |
| msg = "cannot enable DEFER_ACCEPT"; |
| err |= ERR_WARN; |
| } |
| } |
| #endif |
| if (bind(fd, (struct sockaddr *)&listener->addr, listener->proto->sock_addrlen) == -1) { |
| err |= ERR_RETRYABLE | ERR_ALERT; |
| msg = "cannot bind socket"; |
| goto tcp_close_return; |
| } |
| |
| if (listen(fd, listener->backlog ? listener->backlog : listener->maxconn) == -1) { |
| err |= ERR_RETRYABLE | ERR_ALERT; |
| msg = "cannot listen to socket"; |
| goto tcp_close_return; |
| } |
| |
| #if defined(TCP_QUICKACK) |
| if (listener->options & LI_O_NOQUICKACK) |
| setsockopt(fd, IPPROTO_TCP, TCP_QUICKACK, &zero, sizeof(zero)); |
| #endif |
| |
| /* the socket is ready */ |
| listener->fd = fd; |
| listener->state = LI_LISTEN; |
| |
| fdtab[fd].owner = listener; /* reference the listener instead of a task */ |
| fdtab[fd].state = FD_STLISTEN; |
| fdtab[fd].flags = FD_FL_TCP | ((listener->options & LI_O_NOLINGER) ? FD_FL_TCP_NOLING : 0); |
| fdtab[fd].cb[DIR_RD].f = listener->proto->accept; |
| fdtab[fd].cb[DIR_WR].f = NULL; /* never called */ |
| |
| fdinfo[fd].peeraddr = NULL; |
| fdinfo[fd].peerlen = 0; |
| fd_insert(fd); |
| |
| tcp_return: |
| if (msg && errlen) { |
| char pn[INET6_ADDRSTRLEN]; |
| |
| addr_to_str(&listener->addr, pn, sizeof(pn)); |
| snprintf(errmsg, errlen, "%s [%s:%d]", msg, pn, get_host_port(&listener->addr)); |
| } |
| return err; |
| |
| tcp_close_return: |
| close(fd); |
| goto tcp_return; |
| } |
| |
| /* This function creates all TCP sockets bound to the protocol entry <proto>. |
| * It is intended to be used as the protocol's bind_all() function. |
| * The sockets will be registered but not added to any fd_set, in order not to |
| * loose them across the fork(). A call to enable_all_listeners() is needed |
| * to complete initialization. The return value is composed from ERR_*. |
| */ |
| static int tcp_bind_listeners(struct protocol *proto, char *errmsg, int errlen) |
| { |
| struct listener *listener; |
| int err = ERR_NONE; |
| |
| list_for_each_entry(listener, &proto->listeners, proto_list) { |
| err |= tcp_bind_listener(listener, errmsg, errlen); |
| if (err & ERR_ABORT) |
| break; |
| } |
| |
| return err; |
| } |
| |
| /* Add listener to the list of tcpv4 listeners. The listener's state |
| * is automatically updated from LI_INIT to LI_ASSIGNED. The number of |
| * listeners is updated. This is the function to use to add a new listener. |
| */ |
| void tcpv4_add_listener(struct listener *listener) |
| { |
| if (listener->state != LI_INIT) |
| return; |
| listener->state = LI_ASSIGNED; |
| listener->proto = &proto_tcpv4; |
| LIST_ADDQ(&proto_tcpv4.listeners, &listener->proto_list); |
| proto_tcpv4.nb_listeners++; |
| } |
| |
| /* Add listener to the list of tcpv4 listeners. The listener's state |
| * is automatically updated from LI_INIT to LI_ASSIGNED. The number of |
| * listeners is updated. This is the function to use to add a new listener. |
| */ |
| void tcpv6_add_listener(struct listener *listener) |
| { |
| if (listener->state != LI_INIT) |
| return; |
| listener->state = LI_ASSIGNED; |
| listener->proto = &proto_tcpv6; |
| LIST_ADDQ(&proto_tcpv6.listeners, &listener->proto_list); |
| proto_tcpv6.nb_listeners++; |
| } |
| |
| /* This function performs the TCP request analysis on the current request. It |
| * returns 1 if the processing can continue on next analysers, or zero if it |
| * needs more data, encounters an error, or wants to immediately abort the |
| * request. It relies on buffers flags, and updates s->req->analysers. The |
| * function may be called for frontend rules and backend rules. It only relies |
| * on the backend pointer so this works for both cases. |
| */ |
| int tcp_inspect_request(struct session *s, struct buffer *req, int an_bit) |
| { |
| struct tcp_rule *rule; |
| struct stksess *ts; |
| struct stktable *t; |
| int partial; |
| |
| DPRINTF(stderr,"[%u] %s: session=%p b=%p, exp(r,w)=%u,%u bf=%08x bh=%d analysers=%02x\n", |
| now_ms, __FUNCTION__, |
| s, |
| req, |
| req->rex, req->wex, |
| req->flags, |
| req->i, |
| req->analysers); |
| |
| /* We don't know whether we have enough data, so must proceed |
| * this way : |
| * - iterate through all rules in their declaration order |
| * - if one rule returns MISS, it means the inspect delay is |
| * not over yet, then return immediately, otherwise consider |
| * it as a non-match. |
| * - if one rule returns OK, then return OK |
| * - if one rule returns KO, then return KO |
| */ |
| |
| if (req->flags & (BF_SHUTR|BF_FULL) || !s->be->tcp_req.inspect_delay || tick_is_expired(req->analyse_exp, now_ms)) |
| partial = SMP_OPT_FINAL; |
| else |
| partial = 0; |
| |
| list_for_each_entry(rule, &s->be->tcp_req.inspect_rules, list) { |
| int ret = ACL_PAT_PASS; |
| |
| if (rule->cond) { |
| ret = acl_exec_cond(rule->cond, s->be, s, &s->txn, SMP_OPT_DIR_REQ | partial); |
| if (ret == ACL_PAT_MISS) { |
| buffer_dont_connect(req); |
| /* just set the request timeout once at the beginning of the request */ |
| if (!tick_isset(req->analyse_exp) && s->be->tcp_req.inspect_delay) |
| req->analyse_exp = tick_add_ifset(now_ms, s->be->tcp_req.inspect_delay); |
| return 0; |
| } |
| |
| ret = acl_pass(ret); |
| if (rule->cond->pol == ACL_COND_UNLESS) |
| ret = !ret; |
| } |
| |
| if (ret) { |
| /* we have a matching rule. */ |
| if (rule->action == TCP_ACT_REJECT) { |
| buffer_abort(req); |
| buffer_abort(s->rep); |
| req->analysers = 0; |
| |
| s->be->be_counters.denied_req++; |
| s->fe->fe_counters.denied_req++; |
| if (s->listener->counters) |
| s->listener->counters->denied_req++; |
| |
| if (!(s->flags & SN_ERR_MASK)) |
| s->flags |= SN_ERR_PRXCOND; |
| if (!(s->flags & SN_FINST_MASK)) |
| s->flags |= SN_FINST_R; |
| return 0; |
| } |
| else if (rule->action == TCP_ACT_TRK_SC1) { |
| if (!s->stkctr1_entry) { |
| /* only the first valid track-sc1 directive applies. |
| * Also, note that right now we can only track SRC so we |
| * don't check how to get the key, but later we may need |
| * to consider rule->act_prm->trk_ctr.type. |
| */ |
| t = rule->act_prm.trk_ctr.table.t; |
| ts = stktable_get_entry(t, tcp_src_to_stktable_key(s)); |
| if (ts) { |
| session_track_stkctr1(s, t, ts); |
| if (s->fe != s->be) |
| s->flags |= SN_BE_TRACK_SC1; |
| } |
| } |
| } |
| else if (rule->action == TCP_ACT_TRK_SC2) { |
| if (!s->stkctr2_entry) { |
| /* only the first valid track-sc2 directive applies. |
| * Also, note that right now we can only track SRC so we |
| * don't check how to get the key, but later we may need |
| * to consider rule->act_prm->trk_ctr.type. |
| */ |
| t = rule->act_prm.trk_ctr.table.t; |
| ts = stktable_get_entry(t, tcp_src_to_stktable_key(s)); |
| if (ts) { |
| session_track_stkctr2(s, t, ts); |
| if (s->fe != s->be) |
| s->flags |= SN_BE_TRACK_SC2; |
| } |
| } |
| } |
| else { |
| /* otherwise accept */ |
| break; |
| } |
| } |
| } |
| |
| /* if we get there, it means we have no rule which matches, or |
| * we have an explicit accept, so we apply the default accept. |
| */ |
| req->analysers &= ~an_bit; |
| req->analyse_exp = TICK_ETERNITY; |
| return 1; |
| } |
| |
| /* This function performs the TCP response analysis on the current response. It |
| * returns 1 if the processing can continue on next analysers, or zero if it |
| * needs more data, encounters an error, or wants to immediately abort the |
| * response. It relies on buffers flags, and updates s->rep->analysers. The |
| * function may be called for backend rules. |
| */ |
| int tcp_inspect_response(struct session *s, struct buffer *rep, int an_bit) |
| { |
| struct tcp_rule *rule; |
| int partial; |
| |
| DPRINTF(stderr,"[%u] %s: session=%p b=%p, exp(r,w)=%u,%u bf=%08x bh=%d analysers=%02x\n", |
| now_ms, __FUNCTION__, |
| s, |
| rep, |
| rep->rex, rep->wex, |
| rep->flags, |
| rep->i, |
| rep->analysers); |
| |
| /* We don't know whether we have enough data, so must proceed |
| * this way : |
| * - iterate through all rules in their declaration order |
| * - if one rule returns MISS, it means the inspect delay is |
| * not over yet, then return immediately, otherwise consider |
| * it as a non-match. |
| * - if one rule returns OK, then return OK |
| * - if one rule returns KO, then return KO |
| */ |
| |
| if (rep->flags & BF_SHUTR || tick_is_expired(rep->analyse_exp, now_ms)) |
| partial = SMP_OPT_FINAL; |
| else |
| partial = 0; |
| |
| list_for_each_entry(rule, &s->be->tcp_rep.inspect_rules, list) { |
| int ret = ACL_PAT_PASS; |
| |
| if (rule->cond) { |
| ret = acl_exec_cond(rule->cond, s->be, s, &s->txn, SMP_OPT_DIR_RES | partial); |
| if (ret == ACL_PAT_MISS) { |
| /* just set the analyser timeout once at the beginning of the response */ |
| if (!tick_isset(rep->analyse_exp) && s->be->tcp_rep.inspect_delay) |
| rep->analyse_exp = tick_add_ifset(now_ms, s->be->tcp_rep.inspect_delay); |
| return 0; |
| } |
| |
| ret = acl_pass(ret); |
| if (rule->cond->pol == ACL_COND_UNLESS) |
| ret = !ret; |
| } |
| |
| if (ret) { |
| /* we have a matching rule. */ |
| if (rule->action == TCP_ACT_REJECT) { |
| buffer_abort(rep); |
| buffer_abort(s->req); |
| rep->analysers = 0; |
| |
| s->be->be_counters.denied_resp++; |
| s->fe->fe_counters.denied_resp++; |
| if (s->listener->counters) |
| s->listener->counters->denied_resp++; |
| |
| if (!(s->flags & SN_ERR_MASK)) |
| s->flags |= SN_ERR_PRXCOND; |
| if (!(s->flags & SN_FINST_MASK)) |
| s->flags |= SN_FINST_D; |
| return 0; |
| } |
| else { |
| /* otherwise accept */ |
| break; |
| } |
| } |
| } |
| |
| /* if we get there, it means we have no rule which matches, or |
| * we have an explicit accept, so we apply the default accept. |
| */ |
| rep->analysers &= ~an_bit; |
| rep->analyse_exp = TICK_ETERNITY; |
| return 1; |
| } |
| |
| |
| /* This function performs the TCP layer4 analysis on the current request. It |
| * returns 0 if a reject rule matches, otherwise 1 if either an accept rule |
| * matches or if no more rule matches. It can only use rules which don't need |
| * any data. |
| */ |
| int tcp_exec_req_rules(struct session *s) |
| { |
| struct tcp_rule *rule; |
| struct stksess *ts; |
| struct stktable *t = NULL; |
| int result = 1; |
| int ret; |
| |
| list_for_each_entry(rule, &s->fe->tcp_req.l4_rules, list) { |
| ret = ACL_PAT_PASS; |
| |
| if (rule->cond) { |
| ret = acl_exec_cond(rule->cond, s->fe, s, NULL, SMP_OPT_DIR_REQ|SMP_OPT_FINAL); |
| ret = acl_pass(ret); |
| if (rule->cond->pol == ACL_COND_UNLESS) |
| ret = !ret; |
| } |
| |
| if (ret) { |
| /* we have a matching rule. */ |
| if (rule->action == TCP_ACT_REJECT) { |
| s->fe->fe_counters.denied_conn++; |
| if (s->listener->counters) |
| s->listener->counters->denied_conn++; |
| |
| if (!(s->flags & SN_ERR_MASK)) |
| s->flags |= SN_ERR_PRXCOND; |
| if (!(s->flags & SN_FINST_MASK)) |
| s->flags |= SN_FINST_R; |
| result = 0; |
| break; |
| } |
| else if (rule->action == TCP_ACT_TRK_SC1) { |
| if (!s->stkctr1_entry) { |
| /* only the first valid track-sc1 directive applies. |
| * Also, note that right now we can only track SRC so we |
| * don't check how to get the key, but later we may need |
| * to consider rule->act_prm->trk_ctr.type. |
| */ |
| t = rule->act_prm.trk_ctr.table.t; |
| ts = stktable_get_entry(t, tcp_src_to_stktable_key(s)); |
| if (ts) |
| session_track_stkctr1(s, t, ts); |
| } |
| } |
| else if (rule->action == TCP_ACT_TRK_SC2) { |
| if (!s->stkctr2_entry) { |
| /* only the first valid track-sc2 directive applies. |
| * Also, note that right now we can only track SRC so we |
| * don't check how to get the key, but later we may need |
| * to consider rule->act_prm->trk_ctr.type. |
| */ |
| t = rule->act_prm.trk_ctr.table.t; |
| ts = stktable_get_entry(t, tcp_src_to_stktable_key(s)); |
| if (ts) |
| session_track_stkctr2(s, t, ts); |
| } |
| } |
| else { |
| /* otherwise it's an accept */ |
| break; |
| } |
| } |
| } |
| return result; |
| } |
| |
| /* Parse a tcp-response rule. Return a negative value in case of failure */ |
| static int tcp_parse_response_rule(char **args, int arg, int section_type, |
| struct proxy *curpx, struct proxy *defpx, |
| struct tcp_rule *rule, char **err) |
| { |
| if (curpx == defpx || !(curpx->cap & PR_CAP_BE)) { |
| memprintf(err, "%s %s is only allowed in 'backend' sections", |
| args[0], args[1]); |
| return -1; |
| } |
| |
| if (strcmp(args[arg], "accept") == 0) { |
| arg++; |
| rule->action = TCP_ACT_ACCEPT; |
| } |
| else if (strcmp(args[arg], "reject") == 0) { |
| arg++; |
| rule->action = TCP_ACT_REJECT; |
| } |
| else { |
| memprintf(err, |
| "'%s %s' expects 'accept' or 'reject' in %s '%s' (got '%s')", |
| args[0], args[1], proxy_type_str(curpx), curpx->id, args[arg]); |
| return -1; |
| } |
| |
| if (strcmp(args[arg], "if") == 0 || strcmp(args[arg], "unless") == 0) { |
| if ((rule->cond = build_acl_cond(NULL, 0, curpx, (const char **)args+arg, err)) == NULL) { |
| memprintf(err, |
| "'%s %s %s' : error detected in %s '%s' while parsing '%s' condition : %s", |
| args[0], args[1], args[2], proxy_type_str(curpx), curpx->id, args[arg], *err); |
| return -1; |
| } |
| } |
| else if (*args[arg]) { |
| memprintf(err, |
| "'%s %s %s' only accepts 'if' or 'unless', in %s '%s' (got '%s')", |
| args[0], args[1], args[2], proxy_type_str(curpx), curpx->id, args[arg]); |
| return -1; |
| } |
| return 0; |
| } |
| |
| |
| |
| /* Parse a tcp-request rule. Return a negative value in case of failure */ |
| static int tcp_parse_request_rule(char **args, int arg, int section_type, |
| struct proxy *curpx, struct proxy *defpx, |
| struct tcp_rule *rule, char **err) |
| { |
| if (curpx == defpx) { |
| memprintf(err, "%s %s is not allowed in 'defaults' sections", |
| args[0], args[1]); |
| return -1; |
| } |
| |
| if (!strcmp(args[arg], "accept")) { |
| arg++; |
| rule->action = TCP_ACT_ACCEPT; |
| } |
| else if (!strcmp(args[arg], "reject")) { |
| arg++; |
| rule->action = TCP_ACT_REJECT; |
| } |
| else if (strcmp(args[arg], "track-sc1") == 0) { |
| int ret; |
| int kw = arg; |
| |
| arg++; |
| ret = parse_track_counters(args, &arg, section_type, curpx, |
| &rule->act_prm.trk_ctr, defpx, err); |
| |
| if (ret < 0) { /* nb: warnings are not handled yet */ |
| memprintf(err, |
| "'%s %s %s' : %s in %s '%s'", |
| args[0], args[1], args[kw], *err, proxy_type_str(curpx), curpx->id); |
| return ret; |
| } |
| rule->action = TCP_ACT_TRK_SC1; |
| } |
| else if (strcmp(args[arg], "track-sc2") == 0) { |
| int ret; |
| int kw = arg; |
| |
| arg++; |
| ret = parse_track_counters(args, &arg, section_type, curpx, |
| &rule->act_prm.trk_ctr, defpx, err); |
| |
| if (ret < 0) { /* nb: warnings are not handled yet */ |
| memprintf(err, |
| "'%s %s %s' : %s in %s '%s'", |
| args[0], args[1], args[kw], *err, proxy_type_str(curpx), curpx->id); |
| return ret; |
| } |
| rule->action = TCP_ACT_TRK_SC2; |
| } |
| else { |
| memprintf(err, |
| "'%s %s' expects 'accept', 'reject', 'track-sc1' " |
| "or 'track-sc2' in %s '%s' (got '%s')", |
| args[0], args[1], proxy_type_str(curpx), curpx->id, args[arg]); |
| return -1; |
| } |
| |
| if (strcmp(args[arg], "if") == 0 || strcmp(args[arg], "unless") == 0) { |
| if ((rule->cond = build_acl_cond(NULL, 0, curpx, (const char **)args+arg, err)) == NULL) { |
| memprintf(err, |
| "'%s %s %s' : error detected in %s '%s' while parsing '%s' condition : %s", |
| args[0], args[1], args[2], proxy_type_str(curpx), curpx->id, args[arg], *err); |
| return -1; |
| } |
| } |
| else if (*args[arg]) { |
| memprintf(err, |
| "'%s %s %s' only accepts 'if' or 'unless', in %s '%s' (got '%s')", |
| args[0], args[1], args[2], proxy_type_str(curpx), curpx->id, args[arg]); |
| return -1; |
| } |
| return 0; |
| } |
| |
| /* This function should be called to parse a line starting with the "tcp-response" |
| * keyword. |
| */ |
| static int tcp_parse_tcp_rep(char **args, int section_type, struct proxy *curpx, |
| struct proxy *defpx, char **err) |
| { |
| const char *ptr = NULL; |
| unsigned int val; |
| int warn = 0; |
| int arg; |
| struct tcp_rule *rule; |
| |
| if (!*args[1]) { |
| memprintf(err, "missing argument for '%s' in %s '%s'", |
| args[0], proxy_type_str(curpx), curpx->id); |
| return -1; |
| } |
| |
| if (strcmp(args[1], "inspect-delay") == 0) { |
| if (curpx == defpx || !(curpx->cap & PR_CAP_BE)) { |
| memprintf(err, "%s %s is only allowed in 'backend' sections", |
| args[0], args[1]); |
| return -1; |
| } |
| |
| if (!*args[2] || (ptr = parse_time_err(args[2], &val, TIME_UNIT_MS))) { |
| memprintf(err, |
| "'%s %s' expects a positive delay in milliseconds, in %s '%s'", |
| args[0], args[1], proxy_type_str(curpx), curpx->id); |
| if (ptr) |
| memprintf(err, "%s (unexpected character '%c')", *err, *ptr); |
| return -1; |
| } |
| |
| if (curpx->tcp_rep.inspect_delay) { |
| memprintf(err, "ignoring %s %s (was already defined) in %s '%s'", |
| args[0], args[1], proxy_type_str(curpx), curpx->id); |
| return 1; |
| } |
| curpx->tcp_rep.inspect_delay = val; |
| return 0; |
| } |
| |
| rule = calloc(1, sizeof(*rule)); |
| LIST_INIT(&rule->list); |
| arg = 1; |
| |
| if (strcmp(args[1], "content") == 0) { |
| arg++; |
| if (tcp_parse_response_rule(args, arg, section_type, curpx, defpx, rule, err) < 0) |
| goto error; |
| |
| if (rule->cond && (rule->cond->requires & ACL_USE_L6REQ_VOLATILE)) { |
| struct acl *acl; |
| const char *name; |
| |
| acl = cond_find_require(rule->cond, ACL_USE_L6REQ_VOLATILE); |
| name = acl ? acl->name : "(unknown)"; |
| |
| memprintf(err, |
| "acl '%s' involves some request-only criteria which will be ignored in '%s %s'", |
| name, args[0], args[1]); |
| warn++; |
| } |
| |
| LIST_ADDQ(&curpx->tcp_rep.inspect_rules, &rule->list); |
| } |
| else { |
| memprintf(err, |
| "'%s' expects 'inspect-delay' or 'content' in %s '%s' (got '%s')", |
| args[0], proxy_type_str(curpx), curpx->id, args[1]); |
| goto error; |
| } |
| |
| return warn; |
| error: |
| free(rule); |
| return -1; |
| } |
| |
| |
| /* This function should be called to parse a line starting with the "tcp-request" |
| * keyword. |
| */ |
| static int tcp_parse_tcp_req(char **args, int section_type, struct proxy *curpx, |
| struct proxy *defpx, char **err) |
| { |
| const char *ptr = NULL; |
| unsigned int val; |
| int warn = 0; |
| int arg; |
| struct tcp_rule *rule; |
| |
| if (!*args[1]) { |
| if (curpx == defpx) |
| memprintf(err, "missing argument for '%s' in defaults section", args[0]); |
| else |
| memprintf(err, "missing argument for '%s' in %s '%s'", |
| args[0], proxy_type_str(curpx), curpx->id); |
| return -1; |
| } |
| |
| if (!strcmp(args[1], "inspect-delay")) { |
| if (curpx == defpx) { |
| memprintf(err, "%s %s is not allowed in 'defaults' sections", |
| args[0], args[1]); |
| return -1; |
| } |
| |
| if (!*args[2] || (ptr = parse_time_err(args[2], &val, TIME_UNIT_MS))) { |
| memprintf(err, |
| "'%s %s' expects a positive delay in milliseconds, in %s '%s'", |
| args[0], args[1], proxy_type_str(curpx), curpx->id); |
| if (ptr) |
| memprintf(err, "%s (unexpected character '%c')", *err, *ptr); |
| return -1; |
| } |
| |
| if (curpx->tcp_req.inspect_delay) { |
| memprintf(err, "ignoring %s %s (was already defined) in %s '%s'", |
| args[0], args[1], proxy_type_str(curpx), curpx->id); |
| return 1; |
| } |
| curpx->tcp_req.inspect_delay = val; |
| return 0; |
| } |
| |
| rule = calloc(1, sizeof(*rule)); |
| LIST_INIT(&rule->list); |
| arg = 1; |
| |
| if (strcmp(args[1], "content") == 0) { |
| arg++; |
| if (tcp_parse_request_rule(args, arg, section_type, curpx, defpx, rule, err) < 0) |
| goto error; |
| |
| if (rule->cond && (rule->cond->requires & ACL_USE_RTR_ANY)) { |
| struct acl *acl; |
| const char *name; |
| |
| acl = cond_find_require(rule->cond, ACL_USE_RTR_ANY); |
| name = acl ? acl->name : "(unknown)"; |
| |
| memprintf(err, |
| "acl '%s' involves some response-only criteria which will be ignored in '%s %s'", |
| name, args[0], args[1]); |
| warn++; |
| } |
| LIST_ADDQ(&curpx->tcp_req.inspect_rules, &rule->list); |
| } |
| else if (strcmp(args[1], "connection") == 0) { |
| arg++; |
| |
| if (!(curpx->cap & PR_CAP_FE)) { |
| memprintf(err, "%s %s is not allowed because %s %s is not a frontend", |
| args[0], args[1], proxy_type_str(curpx), curpx->id); |
| goto error; |
| } |
| |
| if (tcp_parse_request_rule(args, arg, section_type, curpx, defpx, rule, err) < 0) |
| goto error; |
| |
| if (rule->cond && (rule->cond->requires & (ACL_USE_RTR_ANY|ACL_USE_L6_ANY|ACL_USE_L7_ANY))) { |
| struct acl *acl; |
| const char *name; |
| |
| acl = cond_find_require(rule->cond, ACL_USE_RTR_ANY|ACL_USE_L6_ANY|ACL_USE_L7_ANY); |
| name = acl ? acl->name : "(unknown)"; |
| |
| if (acl->requires & (ACL_USE_L6_ANY|ACL_USE_L7_ANY)) { |
| memprintf(err, |
| "'%s %s' may not reference acl '%s' which makes use of " |
| "payload in %s '%s'. Please use '%s content' for this.", |
| args[0], args[1], name, proxy_type_str(curpx), curpx->id, args[0]); |
| goto error; |
| } |
| if (acl->requires & ACL_USE_RTR_ANY) |
| memprintf(err, |
| "acl '%s' involves some response-only criteria which will be ignored in '%s %s'", |
| name, args[0], args[1]); |
| warn++; |
| } |
| LIST_ADDQ(&curpx->tcp_req.l4_rules, &rule->list); |
| } |
| else { |
| if (curpx == defpx) |
| memprintf(err, |
| "'%s' expects 'inspect-delay', 'connection', or 'content' in defaults section (got '%s')", |
| args[0], args[1]); |
| else |
| memprintf(err, |
| "'%s' expects 'inspect-delay', 'connection', or 'content' in %s '%s' (got '%s')", |
| args[0], args[1], proxy_type_str(curpx), curpx->id); |
| goto error; |
| } |
| |
| return warn; |
| error: |
| free(rule); |
| return -1; |
| } |
| |
| |
| /************************************************************************/ |
| /* All supported sample fetch functios must be declared here */ |
| /************************************************************************/ |
| |
| /* Fetch the request RDP cookie identified in the args, or any cookie if no arg |
| * is passed. It is usable both for ACL and for samples. Note: this decoder |
| * only works with non-wrapping data. Accepts either 0 or 1 argument. Argument |
| * is a string (cookie name), other types will lead to undefined behaviour. |
| */ |
| int |
| smp_fetch_rdp_cookie(struct proxy *px, struct session *l4, void *l7, unsigned int opt, |
| const struct arg *args, struct sample *smp) |
| { |
| int bleft; |
| const unsigned char *data; |
| |
| if (!l4 || !l4->req) |
| return 0; |
| |
| smp->flags = 0; |
| smp->type = SMP_T_CSTR; |
| |
| bleft = l4->req->i; |
| if (bleft <= 11) |
| goto too_short; |
| |
| data = (const unsigned char *)l4->req->p + 11; |
| bleft -= 11; |
| |
| if (bleft <= 7) |
| goto too_short; |
| |
| if (strncasecmp((const char *)data, "Cookie:", 7) != 0) |
| goto not_cookie; |
| |
| data += 7; |
| bleft -= 7; |
| |
| while (bleft > 0 && *data == ' ') { |
| data++; |
| bleft--; |
| } |
| |
| if (args) { |
| |
| if (bleft <= args->data.str.len) |
| goto too_short; |
| |
| if ((data[args->data.str.len] != '=') || |
| strncasecmp(args->data.str.str, (const char *)data, args->data.str.len) != 0) |
| goto not_cookie; |
| |
| data += args->data.str.len + 1; |
| bleft -= args->data.str.len + 1; |
| } else { |
| while (bleft > 0 && *data != '=') { |
| if (*data == '\r' || *data == '\n') |
| goto not_cookie; |
| data++; |
| bleft--; |
| } |
| |
| if (bleft < 1) |
| goto too_short; |
| |
| if (*data != '=') |
| goto not_cookie; |
| |
| data++; |
| bleft--; |
| } |
| |
| /* data points to cookie value */ |
| smp->data.str.str = (char *)data; |
| smp->data.str.len = 0; |
| |
| while (bleft > 0 && *data != '\r') { |
| data++; |
| bleft--; |
| } |
| |
| if (bleft < 2) |
| goto too_short; |
| |
| if (data[0] != '\r' || data[1] != '\n') |
| goto not_cookie; |
| |
| smp->data.str.len = (char *)data - smp->data.str.str; |
| smp->flags = SMP_F_VOLATILE; |
| return 1; |
| |
| too_short: |
| smp->flags = SMP_F_MAY_CHANGE; |
| not_cookie: |
| return 0; |
| } |
| |
| /************************************************************************/ |
| /* All supported ACL keywords must be declared here. */ |
| /************************************************************************/ |
| |
| /* returns either 1 or 0 depending on whether an RDP cookie is found or not */ |
| static int |
| acl_fetch_rdp_cookie_cnt(struct proxy *px, struct session *l4, void *l7, unsigned int opt, |
| const struct arg *args, struct sample *smp) |
| { |
| int ret; |
| |
| ret = smp_fetch_rdp_cookie(px, l4, l7, opt, args, smp); |
| |
| if (smp->flags & SMP_F_MAY_CHANGE) |
| return 0; |
| |
| smp->flags = SMP_F_VOLATILE; |
| smp->type = SMP_T_UINT; |
| smp->data.uint = ret; |
| return 1; |
| } |
| |
| |
| /* fetch the connection's source IPv4/IPv6 address */ |
| static int |
| smp_fetch_src(struct proxy *px, struct session *l4, void *l7, unsigned int opt, |
| const struct arg *args, struct sample *smp) |
| { |
| switch (l4->si[0].addr.from.ss_family) { |
| case AF_INET: |
| smp->data.ipv4 = ((struct sockaddr_in *)&l4->si[0].addr.from)->sin_addr; |
| smp->type = SMP_T_IPV4; |
| break; |
| case AF_INET6: |
| smp->data.ipv6 = ((struct sockaddr_in6 *)(&l4->si[0].addr.from))->sin6_addr; |
| smp->type = SMP_T_IPV6; |
| break; |
| default: |
| return 0; |
| } |
| |
| smp->flags = 0; |
| return 1; |
| } |
| |
| /* set temp integer to the connection's source port */ |
| static int |
| smp_fetch_sport(struct proxy *px, struct session *l4, void *l7, unsigned int opt, |
| const struct arg *args, struct sample *smp) |
| { |
| smp->type = SMP_T_UINT; |
| if (!(smp->data.uint = get_host_port(&l4->si[0].addr.from))) |
| return 0; |
| |
| smp->flags = 0; |
| return 1; |
| } |
| |
| /* fetch the connection's destination IPv4/IPv6 address */ |
| static int |
| smp_fetch_dst(struct proxy *px, struct session *l4, void *l7, unsigned int opt, |
| const struct arg *args, struct sample *smp) |
| { |
| si_get_to_addr(&l4->si[0]); |
| |
| switch (l4->si[0].addr.to.ss_family) { |
| case AF_INET: |
| smp->data.ipv4 = ((struct sockaddr_in *)&l4->si[0].addr.to)->sin_addr; |
| smp->type = SMP_T_IPV4; |
| break; |
| case AF_INET6: |
| smp->data.ipv6 = ((struct sockaddr_in6 *)(&l4->si[0].addr.to))->sin6_addr; |
| smp->type = SMP_T_IPV6; |
| break; |
| default: |
| return 0; |
| } |
| |
| smp->flags = 0; |
| return 1; |
| } |
| |
| /* set temp integer to the frontend connexion's destination port */ |
| static int |
| smp_fetch_dport(struct proxy *px, struct session *l4, void *l7, unsigned int opt, |
| const struct arg *args, struct sample *smp) |
| { |
| si_get_to_addr(&l4->si[0]); |
| |
| smp->type = SMP_T_UINT; |
| if (!(smp->data.uint = get_host_port(&l4->si[0].addr.to))) |
| return 0; |
| |
| smp->flags = 0; |
| return 1; |
| } |
| |
| static int |
| smp_fetch_payload_lv(struct proxy *px, struct session *l4, void *l7, unsigned int opt, |
| const struct arg *arg_p, struct sample *smp) |
| { |
| unsigned int len_offset = arg_p[0].data.uint; |
| unsigned int len_size = arg_p[1].data.uint; |
| unsigned int buf_offset; |
| unsigned int buf_size = 0; |
| struct buffer *b; |
| int i; |
| |
| /* Format is (len offset, len size, buf offset) or (len offset, len size) */ |
| /* by default buf offset == len offset + len size */ |
| /* buf offset could be absolute or relative to len offset + len size if prefixed by + or - */ |
| |
| if (!l4) |
| return 0; |
| |
| b = ((opt & SMP_OPT_DIR) == SMP_OPT_DIR_RES) ? l4->rep : l4->req; |
| |
| if (!b) |
| return 0; |
| |
| if (len_offset + len_size > b->i) |
| goto too_short; |
| |
| for (i = 0; i < len_size; i++) { |
| buf_size = (buf_size << 8) + ((unsigned char *)b->p)[i + len_offset]; |
| } |
| |
| /* buf offset may be implicit, absolute or relative */ |
| buf_offset = len_offset + len_size; |
| if (arg_p[2].type == ARGT_UINT) |
| buf_offset = arg_p[2].data.uint; |
| else if (arg_p[2].type == ARGT_SINT) |
| buf_offset += arg_p[2].data.sint; |
| |
| if (!buf_size || buf_size > b->size || buf_offset + buf_size > b->size) { |
| /* will never match */ |
| smp->flags = 0; |
| return 0; |
| } |
| |
| if (buf_offset + buf_size > b->i) |
| goto too_short; |
| |
| /* init chunk as read only */ |
| smp->type = SMP_T_CBIN; |
| chunk_initlen(&smp->data.str, b->p + buf_offset, 0, buf_size); |
| smp->flags = SMP_F_VOLATILE; |
| return 1; |
| |
| too_short: |
| smp->flags = SMP_F_MAY_CHANGE; |
| return 0; |
| } |
| |
| static int |
| smp_fetch_payload(struct proxy *px, struct session *l4, void *l7, unsigned int opt, |
| const struct arg *arg_p, struct sample *smp) |
| { |
| unsigned int buf_offset = arg_p[0].data.uint; |
| unsigned int buf_size = arg_p[1].data.uint; |
| struct buffer *b; |
| |
| if (!l4) |
| return 0; |
| |
| b = ((opt & SMP_OPT_DIR) == SMP_OPT_DIR_RES) ? l4->rep : l4->req; |
| |
| if (!b) |
| return 0; |
| |
| if (!buf_size || buf_size > b->size || buf_offset + buf_size > b->size) { |
| /* will never match */ |
| smp->flags = 0; |
| return 0; |
| } |
| |
| if (buf_offset + buf_size > b->i) |
| goto too_short; |
| |
| /* init chunk as read only */ |
| smp->type = SMP_T_CBIN; |
| chunk_initlen(&smp->data.str, b->p + buf_offset, 0, buf_size); |
| smp->flags = SMP_F_VOLATILE; |
| return 1; |
| |
| too_short: |
| smp->flags = SMP_F_MAY_CHANGE; |
| return 0; |
| } |
| |
| /* This function is used to validate the arguments passed to a "payload" fetch |
| * keyword. This keyword expects two positive integers, with the second one |
| * being strictly positive. It is assumed that the types are already the correct |
| * ones. Returns 0 on error, non-zero if OK. If <err_msg> is not NULL, it will be |
| * filled with a pointer to an error message in case of error, that the caller |
| * is responsible for freeing. The initial location must either be freeable or |
| * NULL. |
| */ |
| static int val_payload(struct arg *arg, char **err_msg) |
| { |
| if (!arg[1].data.uint) { |
| if (err_msg) |
| memprintf(err_msg, "payload length must be > 0"); |
| return 0; |
| } |
| return 1; |
| } |
| |
| /* This function is used to validate the arguments passed to a "payload_lv" fetch |
| * keyword. This keyword allows two positive integers and an optional signed one, |
| * with the second one being strictly positive and the third one being greater than |
| * the opposite of the two others if negative. It is assumed that the types are |
| * already the correct ones. Returns 0 on error, non-zero if OK. If <err_msg> is |
| * not NULL, it will be filled with a pointer to an error message in case of |
| * error, that the caller is responsible for freeing. The initial location must |
| * either be freeable or NULL. |
| */ |
| static int val_payload_lv(struct arg *arg, char **err_msg) |
| { |
| if (!arg[1].data.uint) { |
| if (err_msg) |
| memprintf(err_msg, "payload length must be > 0"); |
| return 0; |
| } |
| |
| if (arg[2].type == ARGT_SINT && |
| (int)(arg[0].data.uint + arg[1].data.uint + arg[2].data.sint) < 0) { |
| if (err_msg) |
| memprintf(err_msg, "payload offset too negative"); |
| return 0; |
| } |
| return 1; |
| } |
| |
| static struct cfg_kw_list cfg_kws = {{ },{ |
| { CFG_LISTEN, "tcp-request", tcp_parse_tcp_req }, |
| { CFG_LISTEN, "tcp-response", tcp_parse_tcp_rep }, |
| { 0, NULL, NULL }, |
| }}; |
| |
| /* Note: must not be declared <const> as its list will be overwritten. |
| * Please take care of keeping this list alphabetically sorted. |
| */ |
| static struct acl_kw_list acl_kws = {{ },{ |
| { "dst", acl_parse_ip, smp_fetch_dst, acl_match_ip, ACL_USE_TCP4_PERMANENT|ACL_MAY_LOOKUP, 0 }, |
| { "dst_port", acl_parse_int, smp_fetch_dport, acl_match_int, ACL_USE_TCP_PERMANENT, 0 }, |
| { "payload", acl_parse_str, smp_fetch_payload, acl_match_str, ACL_USE_L6REQ_VOLATILE|ACL_MAY_LOOKUP, ARG2(2,UINT,UINT), val_payload }, |
| { "payload_lv", acl_parse_str, smp_fetch_payload_lv, acl_match_str, ACL_USE_L6REQ_VOLATILE|ACL_MAY_LOOKUP, ARG3(2,UINT,UINT,SINT), val_payload_lv }, |
| { "req_rdp_cookie", acl_parse_str, smp_fetch_rdp_cookie, acl_match_str, ACL_USE_L6REQ_VOLATILE|ACL_MAY_LOOKUP, ARG1(0,STR) }, |
| { "req_rdp_cookie_cnt", acl_parse_int, acl_fetch_rdp_cookie_cnt, acl_match_int, ACL_USE_L6REQ_VOLATILE, ARG1(0,STR) }, |
| { "src", acl_parse_ip, smp_fetch_src, acl_match_ip, ACL_USE_TCP4_PERMANENT|ACL_MAY_LOOKUP, 0 }, |
| { "src_port", acl_parse_int, smp_fetch_sport, acl_match_int, ACL_USE_TCP_PERMANENT, 0 }, |
| { NULL, NULL, NULL, NULL }, |
| }}; |
| |
| /* Note: must not be declared <const> as its list will be overwritten. |
| * Note: fetches that may return multiple types must be declared as the lowest |
| * common denominator, the type that can be casted into all other ones. For |
| * instance v4/v6 must be declared v4. |
| */ |
| static struct sample_fetch_kw_list sample_fetch_keywords = {{ },{ |
| { "src", smp_fetch_src, 0, NULL, SMP_T_IPV4, SMP_CAP_REQ|SMP_CAP_RES }, |
| { "dst", smp_fetch_dst, 0, NULL, SMP_T_IPV4, SMP_CAP_REQ|SMP_CAP_RES }, |
| { "dst_port", smp_fetch_dport, 0, NULL, SMP_T_UINT, SMP_CAP_REQ|SMP_CAP_RES }, |
| { "payload", smp_fetch_payload, ARG2(2,UINT,UINT), val_payload, SMP_T_CBIN, SMP_CAP_REQ|SMP_CAP_RES }, |
| { "payload_lv", smp_fetch_payload_lv, ARG3(2,UINT,UINT,SINT), val_payload_lv, SMP_T_CBIN, SMP_CAP_REQ|SMP_CAP_RES }, |
| { "rdp_cookie", smp_fetch_rdp_cookie, ARG1(1,STR), NULL, SMP_T_CSTR, SMP_CAP_REQ|SMP_CAP_RES }, |
| { "src_port", smp_fetch_sport, 0, NULL, SMP_T_UINT, SMP_CAP_REQ|SMP_CAP_RES }, |
| { NULL, NULL, 0, 0, 0 }, |
| }}; |
| |
| __attribute__((constructor)) |
| static void __tcp_protocol_init(void) |
| { |
| protocol_register(&proto_tcpv4); |
| protocol_register(&proto_tcpv6); |
| sample_register_fetches(&sample_fetch_keywords); |
| cfg_register_keywords(&cfg_kws); |
| acl_register_keywords(&acl_kws); |
| } |
| |
| |
| /* |
| * Local variables: |
| * c-indent-level: 8 |
| * c-basic-offset: 8 |
| * End: |
| */ |