| /* |
| * AF_INET/AF_INET6 socket management |
| * |
| * Copyright 2000-2020 Willy Tarreau <w@1wt.eu> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| |
| #include <errno.h> |
| #include <string.h> |
| #include <unistd.h> |
| |
| #include <sys/param.h> |
| #include <sys/socket.h> |
| #include <sys/types.h> |
| |
| #include <netinet/tcp.h> |
| #include <netinet/in.h> |
| |
| #include <haproxy/api.h> |
| #include <haproxy/errors.h> |
| #include <haproxy/fd.h> |
| #include <haproxy/global.h> |
| #include <haproxy/namespace.h> |
| #include <haproxy/receiver-t.h> |
| #include <haproxy/sock.h> |
| #include <haproxy/sock_inet.h> |
| #include <haproxy/tools.h> |
| |
| struct proto_fam proto_fam_inet4 = { |
| .name = "inet4", |
| .sock_domain = PF_INET, |
| .sock_family = AF_INET, |
| .sock_addrlen = sizeof(struct sockaddr_in), |
| .l3_addrlen = 32/8, |
| .addrcmp = sock_inet4_addrcmp, |
| .bind = sock_inet_bind_receiver, |
| .get_src = sock_get_src, |
| .get_dst = sock_inet_get_dst, |
| .set_port = sock_inet_set_port, |
| }; |
| |
| struct proto_fam proto_fam_inet6 = { |
| .name = "inet6", |
| .sock_domain = PF_INET6, |
| .sock_family = AF_INET6, |
| .sock_addrlen = sizeof(struct sockaddr_in6), |
| .l3_addrlen = 128/8, |
| .addrcmp = sock_inet6_addrcmp, |
| .bind = sock_inet_bind_receiver, |
| .get_src = sock_get_src, |
| .get_dst = sock_get_dst, |
| .set_port = sock_inet_set_port, |
| }; |
| |
| /* PLEASE NOTE for function below: |
| * - sock_inet4_* is solely for AF_INET (IPv4) |
| * - sock_inet6_* is solely for AF_INET6 (IPv6) |
| * - sock_inet_* is for either |
| * |
| * The address family SHOULD always be checked. In some cases a function will |
| * be used in a situation where the address family is guaranteed (e.g. protocol |
| * definitions), so the test may be avoided. This special case must then be |
| * mentioned in the comment before the function definition. |
| */ |
| |
| /* determine if the operating system uses IPV6_V6ONLY by default. 0=no, 1=yes. |
| * It also remains if IPv6 is not enabled/configured. |
| */ |
| int sock_inet6_v6only_default = 0; |
| |
| /* Default TCPv4/TCPv6 MSS settings. -1=unknown. */ |
| int sock_inet_tcp_maxseg_default = -1; |
| int sock_inet6_tcp_maxseg_default = -1; |
| |
| /* Compares two AF_INET sockaddr addresses. Returns 0 if they match or non-zero |
| * if they do not match. |
| */ |
| int sock_inet4_addrcmp(const struct sockaddr_storage *a, const struct sockaddr_storage *b) |
| { |
| const struct sockaddr_in *a4 = (const struct sockaddr_in *)a; |
| const struct sockaddr_in *b4 = (const struct sockaddr_in *)b; |
| |
| if (a->ss_family != b->ss_family) |
| return -1; |
| |
| if (a->ss_family != AF_INET) |
| return -1; |
| |
| if (a4->sin_port != b4->sin_port) |
| return -1; |
| |
| return memcmp(&a4->sin_addr, &b4->sin_addr, sizeof(a4->sin_addr)); |
| } |
| |
| /* Compares two AF_INET6 sockaddr addresses. Returns 0 if they match or |
| * non-zero if they do not match. |
| */ |
| int sock_inet6_addrcmp(const struct sockaddr_storage *a, const struct sockaddr_storage *b) |
| { |
| const struct sockaddr_in6 *a6 = (const struct sockaddr_in6 *)a; |
| const struct sockaddr_in6 *b6 = (const struct sockaddr_in6 *)b; |
| |
| if (a->ss_family != b->ss_family) |
| return -1; |
| |
| if (a->ss_family != AF_INET6) |
| return -1; |
| |
| if (a6->sin6_port != b6->sin6_port) |
| return -1; |
| |
| return memcmp(&a6->sin6_addr, &b6->sin6_addr, sizeof(a6->sin6_addr)); |
| } |
| |
| /* Sets the port <port> on IPv4 or IPv6 address <addr>. The address family is |
| * determined from the sockaddr_storage's address family. Nothing is done for |
| * other families. |
| */ |
| void sock_inet_set_port(struct sockaddr_storage *addr, int port) |
| { |
| if (addr->ss_family == AF_INET) |
| ((struct sockaddr_in *)addr)->sin_port = htons(port); |
| else if (addr->ss_family == AF_INET6) |
| ((struct sockaddr_in6 *)addr)->sin6_port = htons(port); |
| } |
| |
| /* |
| * Retrieves the original destination address for the socket <fd> which must be |
| * of family AF_INET (not AF_INET6), with <dir> indicating if we're a listener |
| * (=0) or an initiator (!=0). In the case of a listener, if the original |
| * destination address was translated, the original address is retrieved. It |
| * returns 0 in case of success, -1 in case of error. The socket's source |
| * address is stored in <sa> for <salen> bytes. |
| */ |
| int sock_inet_get_dst(int fd, struct sockaddr *sa, socklen_t salen, int dir) |
| { |
| if (dir) |
| return getpeername(fd, sa, &salen); |
| else { |
| int ret = getsockname(fd, sa, &salen); |
| |
| if (ret < 0) |
| return ret; |
| |
| #if defined(USE_TPROXY) && defined(SO_ORIGINAL_DST) |
| /* For TPROXY and Netfilter's NAT, we can retrieve the original |
| * IPv4 address before DNAT/REDIRECT. We must not do that with |
| * other families because v6-mapped IPv4 addresses are still |
| * reported as v4. |
| */ |
| if (getsockopt(fd, IPPROTO_IP, SO_ORIGINAL_DST, sa, &salen) == 0) |
| return 0; |
| #endif |
| return ret; |
| } |
| } |
| |
| /* Returns true if the passed FD corresponds to a socket bound with RX_O_FOREIGN |
| * according to the various supported socket options. The socket's address family |
| * must be passed in <family>. |
| */ |
| int sock_inet_is_foreign(int fd, sa_family_t family) |
| { |
| int val __maybe_unused; |
| socklen_t len __maybe_unused; |
| |
| switch (family) { |
| case AF_INET: |
| #if defined(IP_TRANSPARENT) |
| val = 0; len = sizeof(val); |
| if (getsockopt(fd, IPPROTO_IP, IP_TRANSPARENT, &val, &len) == 0 && val) |
| return 1; |
| #endif |
| #if defined(IP_FREEBIND) |
| val = 0; len = sizeof(val); |
| if (getsockopt(fd, IPPROTO_IP, IP_FREEBIND, &val, &len) == 0 && val) |
| return 1; |
| #endif |
| #if defined(IP_BINDANY) |
| val = 0; len = sizeof(val); |
| if (getsockopt(fd, IPPROTO_IP, IP_BINDANY, &val, &len) == 0 && val) |
| return 1; |
| #endif |
| #if defined(SO_BINDANY) |
| val = 0; len = sizeof(val); |
| if (getsockopt(fd, SOL_SOCKET, SO_BINDANY, &val, &len) == 0 && val) |
| return 1; |
| #endif |
| break; |
| |
| case AF_INET6: |
| #if defined(IPV6_TRANSPARENT) |
| val = 0; len = sizeof(val); |
| if (getsockopt(fd, IPPROTO_IPV6, IPV6_TRANSPARENT, &val, &len) == 0 && val) |
| return 1; |
| #endif |
| #if defined(IP_FREEBIND) |
| val = 0; len = sizeof(val); |
| if (getsockopt(fd, IPPROTO_IP, IP_FREEBIND, &val, &len) == 0 && val) |
| return 1; |
| #endif |
| #if defined(IPV6_BINDANY) |
| val = 0; len = sizeof(val); |
| if (getsockopt(fd, IPPROTO_IPV6, IPV6_BINDANY, &val, &len) == 0 && val) |
| return 1; |
| #endif |
| #if defined(SO_BINDANY) |
| val = 0; len = sizeof(val); |
| if (getsockopt(fd, SOL_SOCKET, SO_BINDANY, &val, &len) == 0 && val) |
| return 1; |
| #endif |
| break; |
| } |
| return 0; |
| } |
| |
| /* Attempt all known socket options to prepare an AF_INET4 socket to be bound |
| * to a foreign address. The socket must already exist and must not be bound. |
| * 1 is returned on success, 0 on failure. The caller must check the address |
| * family before calling this function. |
| */ |
| int sock_inet4_make_foreign(int fd) |
| { |
| return |
| #if defined(IP_TRANSPARENT) |
| setsockopt(fd, IPPROTO_IP, IP_TRANSPARENT, &one, sizeof(one)) == 0 || |
| #endif |
| #if defined(IP_FREEBIND) |
| setsockopt(fd, IPPROTO_IP, IP_FREEBIND, &one, sizeof(one)) == 0 || |
| #endif |
| #if defined(IP_BINDANY) |
| setsockopt(fd, IPPROTO_IP, IP_BINDANY, &one, sizeof(one)) == 0 || |
| #endif |
| #if defined(SO_BINDANY) |
| setsockopt(fd, SOL_SOCKET, SO_BINDANY, &one, sizeof(one)) == 0 || |
| #endif |
| 0; |
| } |
| |
| /* Attempt all known socket options to prepare an AF_INET6 socket to be bound |
| * to a foreign address. The socket must already exist and must not be bound. |
| * 1 is returned on success, 0 on failure. The caller must check the address |
| * family before calling this function. |
| */ |
| int sock_inet6_make_foreign(int fd) |
| { |
| return |
| #if defined(IPV6_TRANSPARENT) |
| setsockopt(fd, IPPROTO_IPV6, IPV6_TRANSPARENT, &one, sizeof(one)) == 0 || |
| #endif |
| #if defined(IP_FREEBIND) |
| setsockopt(fd, IPPROTO_IP, IP_FREEBIND, &one, sizeof(one)) == 0 || |
| #endif |
| #if defined(IPV6_BINDANY) |
| setsockopt(fd, IPPROTO_IPV6, IPV6_BINDANY, &one, sizeof(one)) == 0 || |
| #endif |
| #if defined(SO_BINDANY) |
| setsockopt(fd, SOL_SOCKET, SO_BINDANY, &one, sizeof(one)) == 0 || |
| #endif |
| 0; |
| } |
| |
| /* Binds receiver <rx>, and assigns rx->iocb and rx->owner as the callback and |
| * context, respectively. Returns and error code made of ERR_* bits on failure |
| * or ERR_NONE on success. On failure, an error message may be passed into |
| * <errmsg>. |
| */ |
| int sock_inet_bind_receiver(struct receiver *rx, char **errmsg) |
| { |
| int fd, err, ext; |
| /* copy listener addr because sometimes we need to switch family */ |
| struct sockaddr_storage addr_inet = rx->addr; |
| |
| /* force to classic sock family, not AF_CUST_* */ |
| addr_inet.ss_family = rx->proto->fam->sock_family; |
| |
| /* ensure we never return garbage */ |
| if (errmsg) |
| *errmsg = 0; |
| |
| err = ERR_NONE; |
| |
| if (rx->flags & RX_F_BOUND) |
| return ERR_NONE; |
| |
| /* if no FD was assigned yet, we'll have to either find a compatible |
| * one or create a new one. |
| */ |
| if (rx->fd == -1) |
| rx->fd = sock_find_compatible_fd(rx); |
| |
| /* if the receiver now has an fd assigned, then we were offered the fd |
| * by an external process (most likely the parent), and we don't want |
| * to create a new socket. However we still want to set a few flags on |
| * the socket. |
| */ |
| fd = rx->fd; |
| ext = (fd >= 0); |
| |
| if (!ext) { |
| fd = my_socketat(rx->settings->netns, rx->proto->fam->sock_domain, |
| rx->proto->sock_type, rx->proto->sock_prot); |
| if (fd == -1) { |
| err |= ERR_RETRYABLE | ERR_ALERT; |
| memprintf(errmsg, "cannot create receiving socket (%s)", strerror(errno)); |
| goto bind_return; |
| } |
| } |
| |
| if (fd >= global.maxsock) { |
| err |= ERR_FATAL | ERR_ABORT | ERR_ALERT; |
| memprintf(errmsg, "not enough free sockets (raise '-n' parameter)"); |
| goto bind_close_return; |
| } |
| |
| if (fd_set_nonblock(fd) == -1) { |
| err |= ERR_FATAL | ERR_ALERT; |
| memprintf(errmsg, "cannot make socket non-blocking"); |
| goto bind_close_return; |
| } |
| |
| if (!ext && setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one)) == -1) { |
| /* not fatal but should be reported */ |
| memprintf(errmsg, "cannot do so_reuseaddr"); |
| err |= ERR_ALERT; |
| } |
| |
| #ifdef SO_REUSEPORT |
| /* OpenBSD and Linux 3.9 support this. As it's present in old libc versions of |
| * Linux, it might return an error that we will silently ignore. |
| */ |
| if (!ext && (global.tune.options & GTUNE_USE_REUSEPORT)) |
| setsockopt(fd, SOL_SOCKET, SO_REUSEPORT, &one, sizeof(one)); |
| #endif |
| |
| if (!ext && (rx->settings->options & RX_O_FOREIGN)) { |
| switch (addr_inet.ss_family) { |
| case AF_INET: |
| if (!sock_inet4_make_foreign(fd)) { |
| memprintf(errmsg, "cannot make receiving socket transparent"); |
| err |= ERR_ALERT; |
| } |
| break; |
| case AF_INET6: |
| if (!sock_inet6_make_foreign(fd)) { |
| memprintf(errmsg, "cannot make receiving socket transparent"); |
| err |= ERR_ALERT; |
| } |
| break; |
| } |
| } |
| |
| #ifdef SO_BINDTODEVICE |
| /* Note: this might fail if not CAP_NET_RAW */ |
| if (!ext && rx->settings->interface) { |
| if (setsockopt(fd, SOL_SOCKET, SO_BINDTODEVICE, |
| rx->settings->interface, |
| strlen(rx->settings->interface) + 1) == -1) { |
| memprintf(errmsg, "cannot bind receiver to device '%s' (%s)", rx->settings->interface, strerror(errno)); |
| err |= ERR_WARN; |
| } |
| } |
| #endif |
| |
| #if defined(IPV6_V6ONLY) |
| if (addr_inet.ss_family == AF_INET6 && !ext) { |
| /* Prepare to match the v6only option against what we really want. Note |
| * that sadly the two options are not exclusive to each other and that |
| * v6only is stronger than v4v6. |
| */ |
| if ((rx->settings->options & RX_O_V6ONLY) || |
| (sock_inet6_v6only_default && !(rx->settings->options & RX_O_V4V6))) |
| setsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY, &one, sizeof(one)); |
| else |
| setsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY, &zero, sizeof(zero)); |
| } |
| #endif |
| |
| if (!ext && bind(fd, (struct sockaddr *)&addr_inet, rx->proto->fam->sock_addrlen) == -1) { |
| err |= ERR_RETRYABLE | ERR_ALERT; |
| memprintf(errmsg, "cannot bind socket (%s)", strerror(errno)); |
| goto bind_close_return; |
| } |
| |
| rx->fd = fd; |
| rx->flags |= RX_F_BOUND; |
| |
| fd_insert(fd, rx->owner, rx->iocb, thread_mask(rx->bind_thread) & all_threads_mask); |
| |
| /* for now, all regularly bound TCP listeners are exportable */ |
| if (!(rx->flags & RX_F_INHERITED)) |
| HA_ATOMIC_OR(&fdtab[fd].state, FD_EXPORTED); |
| |
| bind_return: |
| if (errmsg && *errmsg) { |
| char pn[INET6_ADDRSTRLEN]; |
| |
| addr_to_str(&addr_inet, pn, sizeof(pn)); |
| memprintf(errmsg, "%s for [%s:%d]", *errmsg, pn, get_host_port(&addr_inet)); |
| } |
| return err; |
| |
| bind_close_return: |
| close(fd); |
| goto bind_return; |
| } |
| |
| static void sock_inet_prepare() |
| { |
| int fd, val; |
| socklen_t len; |
| |
| fd = socket(AF_INET, SOCK_STREAM, 0); |
| if (fd >= 0) { |
| #ifdef TCP_MAXSEG |
| /* retrieve the OS' default mss for TCPv4 */ |
| len = sizeof(val); |
| if (getsockopt(fd, IPPROTO_TCP, TCP_MAXSEG, &val, &len) == 0) |
| sock_inet_tcp_maxseg_default = val; |
| #endif |
| close(fd); |
| } |
| |
| fd = socket(AF_INET6, SOCK_STREAM, 0); |
| if (fd >= 0) { |
| #if defined(IPV6_V6ONLY) |
| /* retrieve the OS' bindv6only value */ |
| len = sizeof(val); |
| if (getsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY, &val, &len) == 0 && val > 0) |
| sock_inet6_v6only_default = 1; |
| #endif |
| |
| #ifdef TCP_MAXSEG |
| /* retrieve the OS' default mss for TCPv6 */ |
| len = sizeof(val); |
| if (getsockopt(fd, IPPROTO_TCP, TCP_MAXSEG, &val, &len) == 0) |
| sock_inet6_tcp_maxseg_default = val; |
| #endif |
| close(fd); |
| } |
| } |
| |
| INITCALL0(STG_PREPARE, sock_inet_prepare); |
| |
| |
| REGISTER_BUILD_OPTS("Built with transparent proxy support using:" |
| #if defined(IP_TRANSPARENT) |
| " IP_TRANSPARENT" |
| #endif |
| #if defined(IPV6_TRANSPARENT) |
| " IPV6_TRANSPARENT" |
| #endif |
| #if defined(IP_FREEBIND) |
| " IP_FREEBIND" |
| #endif |
| #if defined(IP_BINDANY) |
| " IP_BINDANY" |
| #endif |
| #if defined(IPV6_BINDANY) |
| " IPV6_BINDANY" |
| #endif |
| #if defined(SO_BINDANY) |
| " SO_BINDANY" |
| #endif |
| ""); |